Two methods for increased specificity and sensitivity in loop-mediated isothermal amplification

Rapid detection of bat coronaviruses from fecal samples using loop-mediated isothermal amplification assay in the field

The global impact of the COVID-19 pandemic has emphasized the critical need for effective viral diagnostics. Although polymerase chain reaction (PCR) is a well-established nucleotide amplification technique, its limitations, such as the need for expensive equipment and skilled technicians, have led to the exploration of alternative methods, including loop-mediated isothermal amplification (LAMP). Bats, as a crucial natural reservoir of coronaviruses (CoVs), particularly Scotophilus bat coronavirus 512 (Scotophilus bat-CoV 512) prevalent among Taiwan's bat population, are the focus of this study. We aimed to detect Scotophilus bat-CoV 512 from bats in field conditions using loop-mediated isothermal amplification (LAMP) assay for on-site detection. Therefore, our study delves into the specificity of the LAMP reaction, emphasizing the careful design of primers to prevent false positive results. A cross reactivity and primer specificity test involving seven different microorganisms, including closely related bat CoVs and two bacterial species typically found in feces, revealed that the LAMP assay uniquely detected Scotophilus bat-CoV 512. The developed colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay was optimized for the primers targeting nucleocapsid (N) gene, and the sensitivity test revealed a detection limit of 2.4 × 103 copies/µL. Our findings indicate the potential of the RT-LAMP assay for on-site detection in the field and subsequent laboratory analysis for comprehensive sampling and further research on bat CoV isolation. The surveillance and monitoring of bat CoVs contribute substantially to mitigating human threats, particularly concerning the emergence of new pandemic variants.

PI primers increase the efficacy of LAMP and RT-LAMP for SARS-CoV-2 and MS2 phage detection

LAMP (Loop-mediated isothermal amplification) is a popular method for the molecular diagnostics of numerous pathogens, specifically useful for point-of-care testing. However, the efficacy and sensitivity of LAMP still need to be maximised for the best performance in clinical settings. Adding a novel fourth primer pair is a promising way to accelerate the LAMP speed. Here, we report PI primers that are part of inner primers and can be used in LAMP without a specific design. PI primers were tested in quantitative LAMP detecting SARS-CoV-2 and MS2. The new primers have increased the speed and sensitivity of quantitative LAMP, RT-LAMP, and duplex LAMP with artificial templates and RNA samples from nasal swabs. Adding PI primers could become a valuable option for LAMP optimisation, especially when a desirable LAMP target is a highly variable DNA sequence with a few conservative sites for primers.

Rapid detection of blood using a novel application of RT-RPA integrated with CRISPR-Cas: ALAS2 detection as a model

A rapid, sensitive and specific test for blood is reported based on a novel application of recombinase polymerase amplification integrated with CRISPR-Cas and lateral flow assay (LFA). The blood specific marker ALAS2 was used as the target to record the presence of blood. The assay used either RNA extracted from a body fluid as a template, or omitting this extraction step and using a direct approach where the questioned body fluid was added directly to the assay. The assay only detected blood (all peripheral blood and some menstrual blood samples) and no other body fluid (semen, saliva, or vaginal fluid). The limit of detection varied from an initial template of 0.195 ng extracted RNA (27 dilution) or 0.0218 μL (26 dilution) liquid peripheral blood. The assay gave the expected result when peripheral blood was mixed with saliva: ratios of peripheral blood/saliva at 19:1, 3:1, 1:1, 1:3 and 1:19 all gave a positive result using extracted RNA. By contrast, only three ratios of peripheral blood and saliva gave a positive result for blood (19:1, 3:1 and 1:1) when adding these two body fluids directly. When peripheral blood was mixed with semen there was a strong inhibition of the assay and ALAS2 could only be detected at ratio of 19:1 using RNA. Using reconstituted peripheral bloodstains gave comparable results to liquid peripheral blood. This is the first application of RT-RPA integrated CRISPR and combined with a LFA assay to detect body fluid-specific RNA. The proposed method opens up the potential to perform this method remote from laboratories such as at crime scenes.

Development and evaluation of a colorimetric LAMP based-assay targeting the Bacteroides HF183 marker for tracking sewage pollution in environmental waters

Surface waters are vulnerable to contamination by human and animal feces, posing risks to human health due to potential exposure to enteric pathogens. This research developed a colorimetric loop-mediated isothermal amplification (cLAMP) assay to detect sewage associated Bacteroides dorei HF183/BacR287 (HF183) marker in wastewater and environmental water samples. The host sensitivity and host specificity of the assay were evaluated, and their performance was compared to the Bacteroides HF183 qPCR assay using control materials (gBlocks), environmental water samples seeded with untreated sewage, and ambient environmental water samples. In serial dilutions of control materials, qPCR produced quantifiable data across all dilutions, while cLAMP detected the marker down to 0.001 pg/µL of control materials, which was two orders of magnitude less sensitive than qPCR. All untreated sewage samples (n = 12) tested positive for HF183 by both the qPCR and cLAMP assays, demonstrating a host sensitivity value of 1.00 (maximum value of 1.00). The host specificity by analysing 70 non-human fecal nucleic acid samples revealed cLAMP's specificity value of 0.81 compared to qPCR's 0.64. When testing sewage-seeded environmental water samples, both methods detected HF183 for the lowest amount of sewage, indicating similar detection sensitivity. The application of cLAMP for tracking sewage pollution in environmental waters showed promising results, with moderate agreement between cLAMP and qPCR (κ = 0.510). However, cLAMP occasionally missed detections compared to qPCR, particularly in low-concentration samples. Overall, the cLAMP HF183 assay demonstrated promising potential as a rapid and sensitive method for detecting sewage pollution, offering a viable alternative to qPCR in certain environmental monitoring scenarios.

The Development and Application of Lyophilized LAMP Detection Reagent for Listeria monocytogenes

Listeria monocytogenes, a zoonotic foodborne pathogen, presents a significant threat to global public health. Therefore, rapid and sensitive detection methods are crucial in mitigating the spread of L. monocytogenes induced diseases. This study introduced a loop-mediated isothermal amplification (LAMP) lyophilized powder detection reagent specifically designed for identifying Listeria monocytogenes. The reagent is user-friendly, quick, and can be easily transported and stored at room temperature. It exhibits no cross-reactivity with eight other types of bacteria and boasts a sensitivity of 101 CFU/mL. In a comparative study of 30 samples, the LAMP lyophilized powder detection reagent demonstrated higher sensitivity than the commercial Listeria monocytogenes qPCR detection kit. Additionally, the experimental time was reduced by approximately 30 min, making it highly suitable for rapid diagnosis. Preparation of lyophilized LAMP reagents may facilitate large-scale deployment, particularly in endemic areas or regions facing rapid outbreaks. This could greatly aid in controlling the transmission of pathogens, especially those transmitted through food.

Diagnosis of Human Endemic Mycoses Caused by Thermally Dimorphic Fungi: From Classical to Molecular Methods

Human endemic mycoses are potentially fatal diseases caused by a diverse group of fungi that can alter their morphology in response to an increase in temperature. These thermally dimorphic fungi affect both healthy and immunocompromised hosts, causing a substantial health and economic burden. Despite this, the diagnosis of endemic mycoses is still a formidable challenge for several reasons, including similar symptomatology, limited utility of classical diagnostic methods, inaccessibility to reliable molecular approaches in most endemic areas, and a lack of clinical suspicion out of these regions. This review summarizes essential knowledge on thermally dimorphic fungi and the life-threatening diseases they cause. The principle, advantages and limitations of the methods traditionally used for their diagnosis are also described, along with the application status and future directions for the development of alternative diagnostic strategies, which could help to reduce the disease burden in endemic areas.

High-Throughput and Integrated CRISPR/Cas12a-Based Molecular Diagnosis Using a Deep Learning Enabled Microfluidic System

CRISPR/Cas-based molecular diagnosis demonstrates potent potential for sensitive and rapid pathogen detection, notably in SARS-CoV-2 diagnosis and mutation tracking. Yet, a major hurdle hindering widespread practical use is its restricted throughput, limited integration, and complex reagent preparation. Here, a system, microfluidic multiplate-based ultrahigh throughput analysis of SARS-CoV-2 variants of concern using CRISPR/Cas12a and nonextraction RT-LAMP (mutaSCAN), is proposed for rapid detection of SARS-CoV-2 and its variants with limited resource requirements. With the aid of the self-developed reagents and deep-learning enabled prototype device, our mutaSCAN system can detect SARS-CoV-2 in mock swab samples below 30 min as low as 250 copies/mL with the throughput up to 96 per round. Clinical specimens were tested with this system, the accuracy for routine and mutation testing (22 wildtype samples, 26 mutational samples) was 98% and 100%, respectively. No false-positive results were found for negative (n = 24) samples.

Development and Implementation of a Novel CAPS Assay Reveals High Prevalence of a Boscalid Resistance Marker and Its Co-Occurrence with an Azole Resistance Marker in Erysiphe necator

Succinate dehydrogenase inhibitors (SDHIs) are frequently used against powdery mildew (PM) fungi, such as Erysiphe necator, the causal agent of grapevine PM. Fungicide resistance, however, hinders effective control. DNA-based monitoring facilitates the recognition of resistance. We aimed (i) to adapt an effective method to detect a widespread genetic marker of resistance to boscalid, a commonly used SDHI, and (ii) to study the co-occurrence of the marker with a marker of resistance to demethylase inhibitor (DMI) fungicides. Sequencing of the sdhB gene identified a nonsynonymous substitution, denoted as sdhB-A794G, leading to an amino acid change (H242R) in the sdhB protein. In vitro fungicide resistance tests showed that E. necator isolates carrying sdhB-A794G were resistant to boscalid. We adopted a cleaved amplified polymorphic sequence-based method and screened more than 500 field samples collected from five Hungarian wine regions in two consecutive years. The sdhB-A794G marker was detected in all wine regions and in both years, altogether in 61.7% of samples, including 20.5% in which both sdhB-A794G and the wild-type were present. The frequency of sdhB-A794G was higher in SDHI-treated vineyards than in vineyards without any SDHI application. A significant difference in the presence of the marker was detected among wine regions; its prevalence ranged from none to 100%. We identified significant co-occurrence of sdhB-A794G with the CYP51-A495T (Y136F) mutation of the CYP51 gene, a known marker of resistance to DMIs. The monitoring of fungicide resistance is fundamental for the successful control of E. necator. Our rapid, cost-effective diagnostic method will support decision-making and fungicide resistance monitoring and management.

Establishment of a RAA-CRISPR Cas12a based diagnostic method for peste des petits ruminants virus N gene and M gene

Peste des petis ruminants (PPR) is an acute, highly contagious fatal disease affecting both domestic and wild small ruminants, caused by Morbillivirus caprinae (also known as peste des petis ruminants virus (PPRV)). Herein, a rapid method based on recombinase aided amplification-clustered regularly interspaced short palindromic repeats-Cas12a (RAA-CRISPR Cas12a) to detect PPRV was developed. CRISPR RNAs and RAA primers for PPRV-N (nucleocapsid) and PPRV-M (matrix) fragments were designed. The reaction system was constructed following screening and optimization. Detection could be completed within in 50 minutes at 37°C. Detection of gradient dilutions of plasmids carrying of PPRV N and M gene fragments indicated a minimum limit of detection of 10 copies/μL. There were no cross-reactions with related viruses and all tested lineages of PPRV were detected successfully. The method also showed good repeatability. The detection of clinical samples (previously detected using reverse transcription polymerase chain reaction (RT-PCR)) indicated good consistency between the RAA-CRISPR Cas12a method and RT-PCR. Thus, the RAA-CRISPR Cas12a method for rapid PPRV diagnosis has strong specificity, high sensitivity, and stable repeatability. Moreover, the results can be observed visually under blue or UV light or using lateral flow strips without complex instruments.

Enhancing the substrate selectivity of enzyme mimetics in biosensing and bioassay: Novel approaches

A substantial development in nanoscale materials possessing catalytic activities comparable with natural enzymes has been accomplished. Their advantages were owing to the excellent sturdiness in an extreme environment, possibilities of their large-scale production resulting in higher profitability, and easy manipulation for modification. Despite these advantages, the main challenge for artificial enzyme mimetics is the lack of substrate selectivity where natural enzymes flourish. This review addresses this vital problem by introducing substrate selectivity strategies to three classes of artificial enzymes: molecularly imprinted polymers, nanozymes (NZs), and DNAzymes. These rationally designed strategies enhance the substrate selectivity and are discussed and exemplified throughout the review. Various functional mechanisms associated with applying enzyme mimetics in biosensing and bioassays are also given. Eventually, future directives toward enhancing the substrate selectivity of biomimetics and related challenges are discussed and evaluated based on their efficiency and convenience in biosensing and bioassays.

Development of a loop-mediated isothermal amplification assay for the rapid detection of Styphnolobium japonicum (L.) Schott as an adulterant of Ginkgo biloba (L.)

BACKGROUND

Species adulteration is a concern in herbal products, especially when plant substitutes of lower economic value replace valuable botanicals. Styphnolobium japonicum is well known as a potential adulterant of Ginkgo biloba, which is one of the most demanded medicinal plants due to its wide use in pharmaceuticals, food supplements, and traditional medicine. Despite bearing some resemblance to ginkgo's flavonol composition, S. japonicum lacks many of G. biloba's desired therapeutic properties. To prevent adulteration practices, it is crucial to implement rigorous quality control measures, including fast and simple diagnostic tools that can be used on-field.

PURPOSE

This study aims to develop for the first time a species-specific loop-mediated isothermal amplification (LAMP) method for the fast identification of S. japonicum in ginkgo-containing products.

METHODS

A set of four specific primers (SjF3, SjB3, SjFIP, and SjBIP) and loop primers (SjLF and SjLB) were designed for a LAMP based assay using the 5.8S partial sequence and the internal transcribed spacer 2 of nuclear ribosomal DNA of S. japonicum.

RESULTS

The successful amplification of the LAMP assay was inspected through visual detection, with the highest intensity recorded at the optimal conditions set at 68 °C for 40 min. The primers showed high specificity and were able to accurately discriminate S. japonicum from G. biloba and 49 other species of medicinal plants. Furthermore, the proposed LAMP assay proved to be fast, selective, and highly sensitive, as demonstrated by the absolute and relative limits of detection, which were reached at 0.5 pg for S. japonicum DNA and 0.01 % S. japonicum in G. biloba, respectively.

CONCLUSIONS

This novel approach allows easy identification and discrimination of S. japonicum as a potential adulterant of G. biloba, thus being a useful tool for quality control. Compared to chromatographic or PCR-based methods, the assay proved to be fast, sensitive and did not require expensive equipment, thus offering the possibly usage in field analysis.

Development of Loop-Mediated Isothermal Amplification Assays for the Rapid and Accurate Diagnosis of Exserohilum turcicum for Field Applications

Northern corn leaf blight (NCLB), caused by Exserohilum turcicum, is one of the most devastating foliar diseases of maize. Rapid and accurate diagnosis for this disease is urgently needed but still limited. Here, we establish a field-deployable diagnostic method to detect E. turcicum based on loop-mediated isothermal amplification (LAMP) assays. A software application called K-mer Elimination by Cross-reference was used to search for the specific sequences belonging to E. turcicum by comparing the whole genome sequence between E. turcicum and other known maize pathogens. Five LAMP primer sets were designed based on specific and single-copy fragments of E. turcicum. Post-LAMP analyses indicated that only the primer set, Et9468_set1, was the most suitable, producing a ladder-like amplification pattern in the agarose gel electrophoresis and a strong fluorescence signal in the presence of SYBR Green I. The LAMP assay using Et9468_set1 primers demonstrated a high level of specificity in distinguishing E. turcicum from six other common fungal pathogens of maize, as well as 12 more fungal and oomycete strains including the epiphytic fungi from maize leaves and other crop pathogens. Moreover, it exhibited remarkable sensitivity by detecting five copies per reaction, which was approximately 104 times more sensitive compared with conventional PCR. The LAMP assay successfully detected E. turcicum in field maize leaves without DNA extraction, demonstrating its suitability for rapid on-spot detection of NCLB. Our study provides a direct LAMP diagnostic method to detect E. turcicum, which enables on-site pathogen detection in the field and the development of preventive strategies for NCLB management.

Evaluating Commercial Loop-Mediated Isothermal Amplification Master Mixes for Enhanced Detection of Foodborne Pathogens

Loop-mediated isothermal amplification, LAMP, is nowadays the most popular isothermal nucleic acid amplification technique, and as such, several commercial, ready-to-use master mixes have flourished. Unfortunately, independent studies to determine their performance are limited. The current study performed an independent evaluation of the existing ready-to-use commercial LAMP master mixes WarmStart® LAMP Kit, LavaLAMP™ DNA Master Mix, Saphir Bst Turbo GreenMaster, OptiGene Fast Master Mix ISO-004, and SynLAMP Mix. To reduce bias, three different genes, namely ttr (Salmonella spp.), rfbE (E. coli O157), and hly (Listeria monocytogenes), were targeted. The comparison was based on amplification speed, performance with decreasing DNA concentrations, and the effect of five typical LAMP reaction additives (betaine, DMSO, pullulan, TMAC, and GuHCl). Significant differences were observed among the different master mixes. OptiGene provided the fastest amplification and showed less detrimental effects associated with the supplements evaluated. Out of the chemicals tested, pullulan provided the best results in terms of amplification speed. It is noteworthy that the different additives impacted the master mixes differently. Overall, the current study provides insights into the performance of commercial LAMP master mixes, which can be of value for the scientific community to better select appropriate reagents when developing new methods.

Electrochemiluminescence aptasensing method for ultrasensitive determination of lipopolysaccharide based on CRISPR-Cas12a accessory cleavage activity

In this study, an ultrasensitive electrochemiluminescence (ECL) aptasensing method was developed for lipopolysaccharide (LPS) determination based on CRISPR-Cas12a accessory cleavage activity. Tris (2,2'-bipyridine) dichlororuthenium (II) (Ru(bpy)32+) was adsorbed on the surface of a glassy carbon electrode (GCE) coated with a mixture of gold nanoparticles (AuNPs) and Nafion film via electrostatic interaction. The obtained ECL platform (Ru(bpy)32+/AuNP/Nafion/GCE) exhibited strong ECL emission. Thiol-functionalized single-stranded DNA (ssDNA) was modified with a ferrocenyl (Fc) group and autonomously assembled on the ECL platform of Ru(bpy)32+/AuNP/Nafion/GCE via thiol-gold bonding, resulting in the quenching of ECL emission. After hybridization of the LPS aptamer strand (AS) with its partial complementary strand (CS), the formed double-stranded DNA (dsDNA) could activate CRISPR-Cas12a to indiscriminately cleave ssDNA-Fc on the surface of Ru(bpy)32+/AuNP/Nafion/GCE, resulting in recovery of the ECL intensity of Ru(bpy)32+ due to the increasing distance between Fc and the electrode surface. The combination of LPS and AS suppressed the formation of dsDNA, inhibited the activation of CRISPR-Cas12a, and prevented further cleavage of ssDNA-Fc. This mechanism aided in upholding the integrity of ssDNA-Fc on the surface of the electrode and was combined with ECL quenching induced by the target. The ECL intensity decreased linearly as the concentration of LPS increased from 1 to 50,000 pg/mL and followed a logarithmic relationship. This method exhibited a remarkably low detection limit of 0.24 pg/mL, which meets the requirement for low-concentration detection of LPS in the human body. The proposed method demonstrates the capacity of CRISPR-Cas12a to perform non-specific cutting of single-stranded DNA and transform the resultant cutting substances into changes in the ECL signal. By amalgamating this approach with the distinct identification abilities of LPS and its aptamers, a simple, responsive, and discriminatory LPS assay was established that holds immense significance for clinical diagnosis.

Loop-Mediated Isothermal Amplification and Lateral Flow Immunochromatography Technology for Rapid Diagnosis of Influenza A/B

Influenza viruses cause highly contagious respiratory diseases that cause millions of deaths worldwide. Rapid detection of influenza viruses is essential for accurate diagnosis and the initiation of appropriate treatment. We developed a loop-mediated isothermal amplification and lateral flow assay (LAMP-LFA) capable of simultaneously detecting influenza A and influenza B. Primer sets for influenza A and influenza B were designed to target conserved regions of segment 7 and the nucleoprotein gene, respectively. Optimized through various primer set ratios, the assay operated at 62 °C for 30 min. For a total of 243 (85 influenza A positive, 58 influenza B positive and 100 negative) nasopharyngeal swab samples, the performance of the influenza A/B multiplex LAMP-LFA was compared with that of the commercial AllplexTM Respiratory Panel 1 assay (Seegene, Seoul, Korea). The influenza A/B multiplex LAMP-LFA demonstrated a specificity of 98% for the non-infected clinical samples, along with sensitivities of 94.1% for the influenza A clinical samples and 96.6% for the influenza B clinical samples, respectively. The influenza A/B multiplex LAMP-LFA showed high sensitivity and specificity, indicating that it is reliable for use in a low-resource environment.

Recombinase-Aided Loop-Mediated Isothermal Amplification on Human Plasmodium knowlesi

Loop-mediated isothermal amplification (LAMP) is a nucleic acid amplification technique that can amplify specific nucleic acids at a constant temperature (63-65°C) within a short period (<1 hour). In this study, we report the utilization of recombinase-aided LAMP to specifically amplify the 18S sRNA of Plasmodium knowlesi. The method was built on a conventional LAMP assay by inclusion of an extra enzyme, namely recombinase, into the master mixture. With the addition of recombinase into the LAMP assay, the assay speed was executed within a time frame of less than 28 minutes at 65°C. We screened 55 P. knowlesi samples and 47 non-P. knowlesi samples. No cross-reactivity was observed for non-P. knowlesi samples, and the detection limit for recombinase-aided LAMP was one copy for P. knowlesi after LAMP amplification. It has been reported elsewhere that LAMP can be detected through fluorescent readout systems. Although such systems result in considerable limits of detection, the need for sophisticated equipment limits their use. Hence, we used here a colorimetric detection platform for the evaluation of the LAMP assay's performance. This malachite green-based recombinase-aided LAMP assay enabled visualization of results with the naked eye. Negative samples were observed by a change in color from green to colorless, whereas positive samples remained green. Our results demonstrate that the LAMP assay developed here is a convenient, sensitive, and useful diagnostic tool for the rapid detection of knowlesi malaria parasites. This method is suitable for implementation in remote healthcare settings, where centralized laboratory facilities, funds, and clinicians are in short supply.

Rapid duplex flap probe-based isothermal assay to identify the Cryptococcus neoformans and Cryptococcus gattii

Cryptococcosis is a life-threatening invasive fungal infection with significantly increasing mortality worldwide, which is mainly caused by Cryptococcus neoformans and Cryptococcus gattii. These two species complexes have different epidemiological and clinical characteristics, indicating the importance of accurate differential diagnosis. However, the clinically used culture method and cryptococcal capsular antigen detection couldn't achieve the above goals. Herein, we established a novel duplex flap probe-based isothermal assay to identify the Cryptococcus neoformans and Cryptococcus gattii within 1 hour. This assay combined the highly sensitive nucleic acid isothermal amplification and highly specific fluorescence probe method, which could effectively distinguish the sequence differences of the two species complexes using two different fluorescence flap probes in a single reaction system. This novel method showed excellent detection performance with sensitivity (10 copies/μL each) and specificity (100%) compared to traditional culture and sequencing methods. Furthermore, we applied this method to spiked clinical samples, 30 cerebrospinal fluids and 30 bronchoalveolar lavage fluids, which kept good detection performance. This novel rapid duplex flap probe-based isothermal assay is a promising and robust tool for applications in differential diagnosis of the Cryptococcus neoformans and Cryptococcus gattii in clinical settings, especially when clinical suspicion for cryptococcal disease is high and epidemiological studies.

CRISPR-Based Multiplex Detection of Human Papillomaviruses for One-Pot Point-of-Care Diagnostics

The World Health Organization's global initiative toward eliminating high-risk Human Papillomavirus (hrHPV)-related cancers recommends DNA testing over visual inspection in all settings for primary cancer screening and HPV eradication by 2100. However, multiple hrHPV types cause different types of cancers, and there is a pressing need for an easy-to-use, multiplex point-of-care diagnostic platform for detecting different hrHPV types. Recently, CRISPR-Cas systems have been repurposed for point-of-care detection. Here, we established a CRISPR-Cas multiplexed diagnostic assay (CRISPRD) to detect cervical cancer-causing hrHPVs in one reaction (one-pot assay). We harnessed the compatibility of thermostable AapCas12b, TccCas13a, and HheCas13a nucleases with isothermal amplification and successfully detected HPV16 and HPV18, along with an internal control in a single-pot assay with a limit of detection of 10 copies and 100% specificity. This platform offers a rapid and practical solution for the multiplex detection of hrHPVs, which may facilitate large-scale hrHPV point-of-care screening. Furthermore, the CRISPRD platform programmability enables it to be adapted for the multiplex detection of any two nucleic acid biomarkers as well as internal control.

Development of a loop-mediated isothermal amplification (LAMP) assay for rapid visual detection of porcine circovirus type 2 (PCV2) and its application

A cost effective, simple and rapid method is critical for detection of porcine circovirus type 2 (PCV2) infection in pigs. The present study reports the development and evaluation a loop-mediated isothermal amplification (LAMP) assay for rapid visual detection of PCV2 in pigs. The time and temperature conditions for amplification of PCV2 genes were optimized to be 30 min at 67 °C. The developed assay was 10 fold more sensitive than conventional PCR with analytical sensitivity of 5 pg and 50 pg, respectively. The developed LAMP assay had a sensitivity of 100%, specificity of 85.45% and overall accuracy of 89.70%. This is perhaps the most rapid of all LAMP reports for PCV2 detection available globally. The assay did not cross-react with porcine parvovirus or classical swine fever virus. DNA sequencing was done to ensure accuracy of LAMP assay results. The assay was assembled into a kit of 20 reactions and validated in different laboratories in India. The developed LAMP assay was proved to be a specific, sensitive and rapid method for visual detection of PCV2 which does not require costly equipments.

Diverse methods of reducing and confirming false-positive results of loop-mediated isothermal amplification assays: A review

Loop-mediated isothermal amplification (LAMP), a rapid and sensitive isothermal nucleic acid amplification method, is a promising alternative to other molecular amplification techniques due to its superior specificity and sensitivity. However, due to primer dimerization, LAMP results in nonspecific and nontemplate amplification. And during the amplification confirmation process, there is carry-over contamination. These factors can result in false-positive results that overestimate the amount of DNA, preventing accurate detection. This review outlined several techniques for reducing false-positive LAMP results before amplification and confirming false-positive results after amplification. Before the amplification step, DNA polymerase activity can be decreased with organic additives such as dimethyl sulfoxide, betaine, and pullulan to prevent nonspecific amplification. The enzyme uracil-DNA-glycosylase (UDG) can eliminate false-positive results caused by carry-over contamination, and the hot-start effect with gold nanoparticles can reduce nonspecific amplification. When confirming false-positive results using clustered regularly interspaced short palindromic repeats, guide RNA accurately detects LAMP amplification, allowing differentiation from nonspecific amplification. By confirming amplification, the colorimetric change in the deoxyribozyme (DNAzyme) formed by the reaction of the G-quadruplex sequence of the LAMP amplicon and hemin can distinguish false-positive results. Lateral flow immunoassay can distinguish false-positive results by accurately recognizing hybridized probes to LAMP amplicons.

Boron nitride nanoplate-based improvement of the specificity and sensitivity in loop-mediated isothermal amplification for Vibrio parahaemolyticus detection

BACKGROUND

Nucleic acid testing based on DNA amplification is gradually entering people's modern life for clinical diagnosis, food safety monitoring and infectious disease prevention. Polymerase chain reaction (PCR) and loop-mediated isothermal amplification (LAMP) are the most powerful techniques that have been the gold standard for quantitative nucleic acid analysis. However, the high nonspecific amplification rate caused by the formation of primer dimers, hairpin structures and mismatched hybridization severely restricts their real-world applications. It is highly desirable to explore a way for improving the specificity and sensitivity of PCR and LAMP assays.

RESULTS

In this work, we demonstrated that a nanomaterial boron nitride nanoplate (BNNP), due to its unique surface properties, can interact with the main components of the amplification reaction, such as single stranded primers and Bst DNA polymerase, and increase the thermal conductivity of the solution. As a result, the presence of BNNPs dramatically improved the specificity of PCR and LAMP. And BNNPs maintained the specificity even after five rounds of PCR. Moreover, the sensitivity of LAMP was also enhanced by BNNPs, and the detection limit of BNNP-based LAMP was two orders of magnitude lower than that of classical LAMP. Then the BNNP-based LAMP was applied to detect Vibrio parahaemolyticus in contaminated seafood samples with high specificity and a 10-fold increase in sensitivity.

SIGNIFICANCE

This is the first systematic demonstration of BNNPs as a promising additive to enhance the efficiency and fidelity of PCR and LAMP amplification reactions, thereby greatly expanding the application of nucleic acid detection in a wide range of laboratory and clinical settings.

Application of loop-mediated isothermal amplification combined with lateral flow assay visualization of Plasmodium falciparum kelch 13 C580Y mutation for artemisinin resistance detection in clinical samples

Resistance to the antimalarial drug artemisinin (ART) has emerged in Greater Mekong Subregion. The molecular marker predominantly used to identify ART resistance is the C580Y mutation in Pfkelch13 of Plasmodium falciparum. Rapid and accurate detection of ART resistance in the field is necessary to guide malaria containment and elimination interventions. Our study evaluates the PfC580Y by using the loop-mediated isothermal amplification and single nucleotide polymorphism analysis visualization using a lateral flow assay (LAMP-SNP-LFA) method for detecting ART resistance in clinical samples collected from Thailand between 2014 and 2019. The optimized incubation condition for the reaction was determined as 45 min at 56 °C, followed by visual detection of positive amplicons using LFA. The assay demonstrated high analytical sensitivity and specificity, with a limit of detection of 16.8 copies of C580Y plasmid/µL of and 100% accuracy for C580Y mutation detection. The PfC580Y LAMP-SNP-LFA method is faster and simpler than conventional polymerase chain reaction/DNA sequencing and has the potential to support antimalarial management policies, malaria control, and global elimination efforts.

Current and Future Advances in the Detection and Surveillance of Biosecurity-Relevant Equine Bacterial Diseases Using Loop-Mediated Isothermal Amplification (LAMP)

Horses play an important role throughout the world, whether for work, culture, or leisure, providing an ever-growing significant contribution to the economy. The increase in importation and movement of horses, both nationally and internationally, has inevitably allowed for the global equine industry to grow. Subsequently, however, the potential for transmission of fatal equine bacterial diseases has also escalated, and devasting outbreaks continue to occur. To prevent such events, disease surveillance and diagnosis must be heightened throughout the industry. Current common, or "gold-standard" techniques, have shown to be inadequate at times, thus requiring newer technology to impede outbreaks. Loop-mediated isothermal amplification (LAMP) has proven to be a reliable, rapid, and accessible tool in both diagnostics and surveillance. This review will discuss equine bacterial diseases of biosecurity relevance and their current diagnostic approaches, as well as their respective LAMP assay developments. Additionally, we will provide insight regarding newer technology and advancements associated with this technique and their potential use for the outlined diseases.

Paper-based colorimetric loop-mediated isothermal amplification (LAMP) assay for the identification of latent Colletotrichum in harvested fruit

Paper-based analytical devices (PADs) have gained enormous attention because of their low-cost, simple fabrication, and portability. Here, we propose a paper-based device for performing reverse transcription loop-mediated isothermal amplification (RT-LAMP) with real-time simultaneous detection of C. gloeosporioides latent infections in tomatoes. RT-LAMP-based PAD platform comprises a paper substrate on which the DNA amplification reaction occurs. Among different types of tested papers, cellulose membrane (grade 4) enabled effective visualization of the amplification result. The assay was found highly selective for the latent stage of C. gloeosporioides with lower limit of detection (LOD) of 0.5 pg of total extracted RNA. The developed assay generated the results within 40 min and hence can be efficiently employed for identifying C. gloeosporioides in resource-limited settings.

Real-Time, Multiplexed SHERLOCK for in Vitro Diagnostics

The pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has highlighted the need for simple, low-cost, and scalable diagnostics that can be widely deployed for rapid testing. Clustered regularly interspaced short palindromic repeats (CRISPR)-based diagnostics have emerged as a promising technology, but its implementation in clinical laboratories has been limited by the requirement of a separate amplification step prior to CRISPR-associated (Cas) enzyme-based detection. This article reports the discovery of two novel Cas12 enzymes (SLK9 and SLK5-2) that exhibit enzymatic activity at 60°C, which, when combined with loop-mediated isothermal amplification (LAMP), enable a real-time, single-step nucleic acid detection method [real-time SHERLOCK (real-time SLK)]. Real-time SLK was demonstrated to provide accurate results comparable to those from real-time quantitative RT-PCR in clinical samples, with 100% positive and 100% negative percent agreement. The method is further demonstrated to be compatible with direct testing (real-time SLK Direct) of samples from anterior nasal swabs, without the need for standard nucleic acid extraction. Lastly, SLK9 was combined with either Alicyclobacillus acidoterrestris AacCas12b or with SLK5-2 to generate a real-time, multiplexed CRISPR-based diagnostic assay for the simultaneous detection of SARS-CoV-2 and a human-based control in a single reaction, with sensitivity down to 5 copies/μL and a time to result of under 30 minutes.

CRISPR Assays for Disease Diagnosis: Progress to and Barriers Remaining for Clinical Applications

Numerous groups have employed the special properties of CRISPR/Cas systems to develop platforms that have broad potential applications for sensitive and specific detection of nucleic acid (NA) targets. However, few of these approaches have progressed to commercial or clinical applications. This review summarizes the properties of known CRISPR/Cas systems and their applications, challenges associated with the development of such assays, and opportunities to improve their performance or address unmet assay needs using nano-/micro-technology platforms. These include rapid and efficient sample preparation, integrated single-tube, amplification-free, quantifiable, multiplex, and non-NA assays. Finally, this review discusses the current outlook for such assays, including remaining barriers for clinical or point-of-care applications and their commercial development.

Evaluation of the effect of outer primer structure, and inner primer linker sequences, in the performance of Loop-mediated isothermal amplification

Loop-mediated isothermal amplification, or LAMP, is nowadays the most popular isothermal nucleic acid amplification technique. This technique implements a minimum of four primers, named outer (F3/B3) and inner primers (FIP/BIP). The inner primers hybridize in two distinct regions, and some studies have reported that the usage of a linker, typically composed of four thymines, in the middle of these primers can improve assay performance. In addition to this, dual-priming oligonucleotides, DPO, have been reported to provide highly specific reducing non-specific amplifications. Considering the large number of primers implemented in LAMP assays, in the current study the suitability of DPO primers replacing regular outer primers; and their combination with different linker sequences in the inner primers were explored. The results demonstrated that replacing standard F3/B3 by DPO primers does not significantly affect that overall performance of the assay, and provides additional stability to temperature changes. This observations were consistent regardless the type of linker implemented in the inner primers, out of which in the current study a linker composed of thymines significantly outperformed the other options tested, most likely due to a combination of sequence and physical structure.

Visual Detection of Stem-Loop Primer Amplification (SPA) Products without Denaturation Using Peroxidase-like DNA Machines (PxDM)

Rapid, inexpensive, and accurate determination of nucleic acids is a decisive factor in evaluating population's health and monitoring treatment at point-of-care (POC) settings. Testing systems with visual outputs can provide instrument-free signal detection. Isothermal amplification technologies can substitute conventional polymerase chain reaction (PCR) testing due to compatibility with the POC diagnostic. Here, we have visually detected DNA fragments obtained by stem-loop-primer-assisted isothermal amplification (SPA), but not those obtained by PCR or LAMP amplification using DNA nanomachines with peroxidase-like activity (PxDM) with sensitivity to a single nucleotide substitution. Compared to the diagnostics with conventional loop-mediated isothermal amplification (LAMP), the PxDM method produces no false positive signals with the non-specific amplification products. The study suggests that PxDM, in conjunction with SPA isothermal amplification, can become a valid platform for POC testing systems.

Rapid and simple colorimetric detection of quiescent Colletotrichum in harvested fruit using reverse transcriptional loop-mediated isothermal amplification (RT-LAMP) technology

Anthracnose, caused by the fungus Colletotrichum gloeosporioides, is one of the major causes of postharvest decay of fruits and vegetables. Detection of the pathogen at an early stage of infection is crucial to developing a disease management strategy. In this work, a loop-mediated isothermal amplification (LAMP) assay was developed for the rapid detection of C. gloeosporioides targeting the transcript enoyl-CoA hydratase (ECH) that significantly upregulates only during C. gloeosporioides quiescent stage. The assay enabled a naked-eye detection of C. gloeosporioides RNA within 23 min based on a color change of LAMP products from pink to yellow. The detection limit of the LAMP assay was 1 pg of total RNA extracted from fruit peel in a 25 μL reaction. Positive results were obtained only in samples carrying the ECH gene, whereas no cross-reaction was observed for a different quiescent marker (histone deacetylase (HDAC)) or an appressorium marker (scytalone dehydratase, (SD)), indicating the high specificity of the method. Hence, the results indicate that the developed LAMP assay is a rapid, highly sensitive, and specific tool for the early detection of quiescent C. gloeosporioides and could be employed to manage postharvest diseases.

High-Performance PCR for Alleles Discrimination of Chromo-Helicase-DNA Binding Protein (CHD1) Gene in Bird Sexing

Genetic analyses aiming at assessing the presence of specific sequences or alleles are often carried out by PCR. Sexing of most birds is nowadays based on PCR with "universal" primers and relies on the assessment of the presence of the sex-linked CHD1-Z and -W alleles. The entire workflow is relatively time-consuming, especially for batch analyses, whereas methods that allow carrying out the entire procedure in a short time are highly desirable. The only method for outdoor analyses reported so far relies on LAMP; however; it fails to work properly in Procellariiformes. Besides improving the LAMP test; we have developed a PCR-based DNA amplification procedure (named high-performance PCR); whose unique features allow it to outperform standard PCR; making possible the direct, in-tube visual reading of results. We tested it with specifically designed Procellariiformes-targeted primer sets for rapid sexing of the birds using fluorimetric detection. The protocol, combined with rapid DNA extraction, allows for fast reading of results without electrophoresis within less than 1 h from sampling. The technique could be extended to other species, as well as to many other applications.

Detection of Soybean-Derived Components in Dairy Products Using Proofreading Enzyme-Mediated Probe Cleavage Coupled with Ladder-Shape Melting Temperature Isothermal Amplification (Proofman-LMTIA)

Food adulteration is a serious problem all over the world. Establishing an accurate, sensitive and fast detection method is an important part of identifying food adulteration. Herein, a sequence-specific ladder-shape melting temperature isothermal amplification (LMTIA) assay was reported to detect soybean-derived components using proofreading enzyme-mediated probe cleavage (named Proofman), which could realize real-time and visual detection without uncapping. The results showed that, under the optimal temperature of 57 °C, the established Proofman-LMTIA method for the detection of soybean-derived components in dairy products was sensitive to 1 pg/μL, with strong specificity, and could distinguish soybean genes from those of beef, mutton, sunflower, corn, walnut, etc. The established Proofman-LMTIA detection method was applied to the detection of actual samples of cow milk and goat milk. The results showed that the method was accurate, stable and reliable, and the detection results were not affected by a complex matrix without false positives or false negatives. It was proved that the method could be used for the detection and identification of soybean-derived components in actual dairy products samples.

CRISPR Cas12a-Powered Silicon Surface-Enhanced Raman Spectroscopy Ratiometric Chip for Sensitive and Reliable Quantification

Sensitive and reliable clustered regularly interspaced short palindromic repeats (CRISPR) quantification without preamplification of the sample remains a challenge. Herein, we report a CRISPR Cas12a-powered silicon surface-enhanced Raman spectroscopy (SERS) ratiometric chip for sensitive and reliable quantification. As a proof-of-concept application, we select the platelet-derived growth factor-BB (PDGF-BB) as the target. We first develop a microfluidic synthetic strategy to prepare homogeneous silicon SERS substrates, in which uniform silver nanoparticles (AgNPs) are in situ grown on a silicon wafer (AgNPs@Si) by microfluidic galvanic deposition reactions. Next, one 5'-SH-3'-ROX-labeled single-stranded DNA (ssDNA) is modified on AgNPs via Ag-S bonds. In our design, such ssDNA has two fragments: one fragment hybridizes to its complementary DNA (5'-Cy3-labeled ssDNA) to form double-stranded DNA (dsDNA) and the other fragment labeled with 6'-carboxy-X-rhodmine (ROX) extends out as a substrate for Cas12a. The cleavage of the ROX-tagged fragment by Cas12a is controlled by the presence or not of PDGF-BB. Meanwhile, Cy3 molecules serving as internal standard molecules still stay at the end of the rigid dsDNA, and their signals remain constant. Thereby, the ratio of ROX signal intensity to Cy3 intensity can be employed for the reliable quantification of PDGF-BB concentration. The developed chip features an ultrahigh sensitivity (e.g., the limit of detection is as low as 3.2 pM, approximately 50 times more sensitive than the fluorescence counterpart) and good reproducibility (e.g., the relative standard deviation is less than 5%) in the detection of PDGF-BB.

CRISPR-Based Diagnostics: Challenges and Potential Solutions toward Point-of-Care Applications

The COVID-19 pandemic has challenged the conventional diagnostic field and revealed the need for decentralized Point of Care (POC) solutions. Although nucleic acid testing is considered to be the most sensitive and specific disease detection method, conventional testing platforms are expensive, confined to central laboratories, and are not deployable in low-resource settings. CRISPR-based diagnostics have emerged as promising tools capable of revolutionizing the field of molecular diagnostics. These platforms are inexpensive, simple, and do not require the use of special instrumentation, suggesting they could democratize access to disease diagnostics. However, there are several obstacles to the use of the current platforms for POC applications, including difficulties in sample processing and stability. In this review, we discuss key advancements in the field, with an emphasis on the challenges of sample processing, stability, multiplexing, amplification-free detection, signal interpretation, and process automation. We also discuss potential solutions for revolutionizing CRISPR-based diagnostics toward sample-to-answer diagnostic solutions for POC and home use.

Capturing nucleic acid variants with precision using CRISPR diagnostics

CRISPR/Cas systems have the ability to precisely target nucleotide sequences and enable their rapid identification and modification. While nucleotide modification has enabled the therapeutic correction of diseases, the process of identifying the target DNA or RNA has greatly expanded the field of molecular diagnostics in recent times. CRISPR-based DNA/RNA detection through programmable nucleic acid binding or cleavage has been demonstrated for a large number of pathogenic and non-pathogenic targets. Combining CRISPR detection with nucleic acid amplification and a terminal signal readout step allowed the development of numerous rapid and robust nucleic acid platforms. Wherever the Cas effector can faithfully distinguish nucleobase variants in the target, the platform can also be extended for sequencing-free rapid variant detection. Some initial PAM disruption-based SNV detection reports were limited to finding or integrating mutated/mismatched nucleotides within the PAM sequences. In this review, we try to summarize the developments made in CRISPR diagnostics (CRISPRDx) to date emphasizing CRISPR-based SNV detection. We also discuss the applications where such diagnostic modalities can be put to use, covering various fields of clinical research, SNV screens, disease genotyping, primary surveillance during microbial infections, agriculture, food safety, and industrial biotechnology. The ease of rapid design and implementation of such multiplexable assays can potentially expand the applications of CRISPRDx in the domain of affinity-based target sequencing, with immense possibilities for low-cost, quick, and widespread usage. In the end, in combination with proximity assays and a suicidal gene approach, CRISPR-based in vivo SNV detection and cancer cell targeting can be formulated as personalized gene therapy.

Current strategies for SARS-CoV-2 molecular detection

The molecular detection of SARS-CoV-2 is extremely important for the discovery and prevention of pandemic dissemination. Because SARS-CoV-2 is not always present in the samples that can be collected, the sample chosen for testing has inevitably become the key to the SARS-CoV-2 positive cases screening. The nucleotide amplification strategy mainly includes Q-PCR assays and isothermal amplification assays. The Q-PCR assay is the most used SARS-CoV-2 detection assay. Due to heavy expenditures and other drawbacks, isothermal amplification cannot replace the dominant position of the Q-PCR assay. The antibody-based detection combined with Q-PCR can help to find more positive cases than only using nucleotide amplification-based assays. Pooled testing based on Q-PCR significantly increases efficiency and reduces the cost of massive-scale screening. The endless stream of variants emerging across the world poses a great challenge to SARS-CoV-2 molecular detection. The multi-target assays and several other strategies have proved to be efficient in the detection of mutated SARS-CoV-2 variants. Further research work should concentrate on: (1) identifying more ideal sample plucking strategies, (2) ameliorating the Q-PCR primer and probes targeted toward mutated SARS-CoV-2 variants, (3) exploring more economical and precise isothermal amplification assays, and (4) developing more advanced strategies for antibody/antigen or engineered antibodies to ameliorate the antibody/antigen-based strategy.

CRISPR-based systems for sensitive and rapid on-site COVID-19 diagnostics

The COVID-19 pandemic has strained healthcare systems. Sensitive, specific, and timely COVID-19 diagnosis is crucial for effective medical intervention and transmission control. RT-PCR is the most sensitive/specific, but requires costly equipment and trained personnel in centralized laboratories, which are inaccessible to resource-limited areas. Antigen rapid tests enable point-of-care (POC) detection but are significantly less sensitive/specific. CRISPR-Cas systems are compatible with isothermal amplification and dipstick readout, enabling sensitive/specific on-site testing. However, improvements in sensitivity and workflow complexity are needed to spur clinical adoption. We outline the mechanisms/strategies of major CRISPR-Cas systems, evaluate their on-site diagnostic capabilities, and discuss future research directions.

Rapid detection of hepatitis C virus using recombinase polymerase amplification

Over 71 million people are infected with hepatitis C virus (HCV) worldwide, and approximately 400,000 global deaths result from complications of untreated chronic HCV. Pan-genomic direct-acting antivirals (DAAs) have recently become widely available and feature high cure rates in less than 12 weeks of treatment. The rollout of DAAs is reliant on diagnostic tests for HCV RNA to identify eligible patients with viremic HCV infections. Current PCR-based HCV RNA assays are restricted to well-resourced central laboratories, and there remains a prevailing clinical need for expanded access to decentralized HCV RNA testing to provide rapid chronic HCV diagnosis and linkage to DAAs in outpatient clinics. This paper reports a rapid, highly accurate, and minimally instrumented assay for HCV RNA detection using reverse transcription recombinase polymerase amplification (RT-RPA). The assay detects all HCV genotypes with a limit of detection of 25 copies per reaction for genotype 1, the most prevalent in the United States and worldwide. The clinical sensitivity and specificity of the RT-RPA assay were both 100% when evaluated using 78 diverse clinical serum specimens. The accuracy, short runtime, and low heating demands of RT-RPA may enable implementation in a point-of-care HCV test to expand global access to effective treatment via rapid chronic HCV diagnosis.

CRISPR/Cas systems usher in a new era of disease treatment and diagnosis

The discovery and development of the CRISPR/Cas system is a milestone in precise medicine. CRISPR/Cas nucleases, base-editing (BE) and prime-editing (PE) are three genome editing technologies derived from CRISPR/Cas. In recent years, CRISPR-based genome editing technologies have created immense therapeutic potential with safe and efficient viral or non-viral delivery systems. Significant progress has been made in applying genome editing strategies to modify T cells and hematopoietic stem cells (HSCs) ex vivo and to treat a wide variety of diseases and disorders in vivo. Nevertheless, the clinical translation of this unique technology still faces many challenges, especially targeting, safety and delivery issues, which require further improvement and optimization. In addition, with the outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), CRISPR-based molecular diagnosis has attracted extensive attention. Growing from the specific set of molecular biological discoveries to several active clinical trials, CRISPR/Cas systems offer the opportunity to create a cost-effective, portable and point-of-care diagnosis through nucleic acid screening of diseases. In this review, we describe the development, mechanisms and delivery systems of CRISPR-based genome editing and focus on clinical and preclinical studies of therapeutic CRISPR genome editing in disease treatment as well as its application prospects in therapeutics and molecular detection.

A quantitative RT-qLAMP for the detection of SARS-CoV-2 and human gene in clinical application

Reverse transcription (RT) - loop-mediated isothermal amplification (LAMP) assay is a rapid and one-step method to detect SARS-CoV-2 in the pandemic. Quantitative estimation of the viral load of SARS-CoV-2 in patient samples could help physicians make decisions on clinical treatment and patient management. Here, we propose to use a quantitative LAMP (qLAMP) method to evaluate the viral load of SARS-CoV-2 in samples. We used threshold time (TT) values of qLAMP, the isothermal incubation time required for the fluorescent or colorimetric signal to reach the threshold, to indicate the viral load of clinical samples. Similar to the cycle threshold (Ct ) values in conventional qPCR, TT values of qLAMP show a linear relationship to the copy numbers of SARS-CoV-2. The higher the viral loadings, the lower qLAMP TT values are. The RT-qLAMP assay was demonstrated to quantify the viral loads of synthesized full-length RNA, inactivated viral particles (BBIBP-CorV), and clinical samples within 15 min by fluorescent reading and 25 min by colorimetric reading. The RT-qLAMP has been applied to detect Alpha, Beta, Kappa, Delta, and Omicron variants of SARS-CoV-2, as well as the human beta-actin gene, and their TT values showed the linear patterns. The RT-qLAMP assays were evaluated by 64 clinical samples (25 positives and 39 negatives) for the assessment of viral loads, and it was also used to quantify the human beta-actin gene, which was used as a control and an indicator of sampling quality in clinical swab samples. The result of RT-qLAMP was in good agreement with the result of RT-qPCR. The RT-qLAMP assay detected all clinical samples, including those with Ct  = 35, within 10 min using fluorescent reading.

Nanozyme-catalysed CRISPR assay for preamplification-free detection of non-coding RNAs

CRISPR-based diagnostics enable specific sensing of DNA and RNA biomarkers associated with human diseases. This is achieved through the binding of guide RNAs to a complementary sequence that activates Cas enzymes to cleave reporter molecules. Currently, most CRISPR-based diagnostics rely on target preamplification to reach sufficient sensitivity for clinical applications. This limits quantification capability and adds complexity to the reaction chemistry. Here we show the combination of a CRISPR-Cas-based reaction with a nanozyme-linked immunosorbent assay, which allows for the quantitative and colorimetric readout of Cas13-mediated RNA detection through catalytic metallic nanoparticles at room temperature (CrisprZyme). We demonstrate that CrisprZyme is easily adaptable to a lateral-flow-based readout and different Cas enzymes and enables the sensing of non-coding RNAs including microRNAs, long non-coding RNAs and circular RNAs. We utilize this platform to identify patients with acute myocardial infarction and to monitor cellular differentiation in vitro and in tissue biopsies from prostate cancer patients. We anticipate that CrisprZyme will serve as a universally applicable signal catalyst for CRISPR-based diagnostics, which will expand the spectrum of targets for preamplification-free, quantitative detection.

Novel CRISPR-based detection of Leishmania species

Tegumentary leishmaniasis, a disease caused by protozoan parasites of the genus Leishmania, is a major public health problem in many regions of Latin America. Its diagnosis is difficult given other conditions resembling leishmaniasis lesions and co-occurring in the same endemic areas. A combination of parasitological and molecular methods leads to accurate diagnosis, with the latter being traditionally performed in centralized reference and research laboratories as they require specialized infrastructure and operators. Clustered regularly interspaced short palindromic repeats/CRISPR-associated protein (CRISPR/Cas) systems have recently driven innovative tools for nucleic acid detection that combine high specificity, sensitivity and speed and are readily adaptable for point-of-care testing. Here, we harnessed the CRISPR-Cas12a system for molecular detection of Leishmania spp., emphasizing medically relevant parasite species circulating in Peru and other endemic areas in Latin America, with Leishmania (Viannia) braziliensis being the main etiologic agent of cutaneous and mucosal leishmaniasis. We developed two assays targeting multi-copy targets commonly used in the molecular diagnosis of leishmaniasis: the 18S ribosomal RNA gene (18S rDNA), highly conserved across Leishmania species, and a region of kinetoplast DNA (kDNA) minicircles conserved in the L. (Viannia) subgenus. Our CRISPR-based assays were capable of detecting down to 5 × 10-2 (kDNA) or 5 × 100 (18S rDNA) parasite genome equivalents/reaction with PCR preamplification. The 18S PCR/CRISPR assay achieved pan-Leishmania detection, whereas the kDNA PCR/CRISPR assay was specific for L. (Viannia) detection. No cross-reaction was observed with Trypanosoma cruzi strain Y or human DNA. We evaluated the performance of the assays using 49 clinical samples compared to a kDNA real-time PCR assay as the reference test. The kDNA PCR/CRISPR assay performed equally well as the reference test, with positive and negative percent agreement of 100%. The 18S PCR/CRISPR assay had high positive and negative percent agreement of 82.1% and 100%, respectively. The findings support the potential applicability of the newly developed CRISPR-based molecular tools for first-line diagnosis of Leishmania infections at the genus and L. (Viannia) subgenus levels.

Listeria monocytogenes in foods-From culture identification to whole-genome characteristics

Listeria monocytogenes is an important foodborne pathogen, which is able to persist in the food production environments. The presence of these bacteria in different niches makes them a potential threat for public health. In the present review, the current information on the classical and alternative methods used for isolation and identification of L. monocytogenes in food have been described. Although these techniques are usually simple, standardized, inexpensive, and are routinely used in many food testing laboratories, several alternative molecular-based approaches for the bacteria detection in food and food production environments have been developed. They are characterized by the high sample throughput, a short time of analysis, and cost-effectiveness. However, these methods are important for the routine testing toward the presence and number of L. monocytogenes, but are not suitable for characteristics and typing of the bacterial isolates, which are crucial in the study of listeriosis infections. For these purposes, novel approaches, with a high discriminatory power to genetically distinguish the strains during epidemiological studies, have been developed, e.g., whole-genome sequence-based techniques such as NGS which provide an opportunity to perform comparison between strains of the same species. In the present review, we have shown a short description of the principles of microbiological, alternative, and modern methods of detection of L. monocytogenes in foods and characterization of the isolates for epidemiological purposes. According to our knowledge, similar comprehensive papers on such subject have not been recently published, and we hope that the current review may be interesting for research communities.

Point-of-Care DNA Amplification for Disease Diagnosis and Management

Early detection of pests and pathogens is of paramount importance in reducing agricultural losses. One approach to early detection is point-of-care (POC) diagnostics, which can provide early warning and therefore allow fast deployment of preventive measures to slow down the establishment of crop diseases. Among the available diagnostic technologies, nucleic acid amplification-based diagnostics provide the highest sensitivity and specificity, and those technologies that forego the requirement for thermocycling show the most potential for use at POC. In this review, I discuss the progress, advantages, and disadvantages of the established and most promising POC amplification technologies. The success and usefulness of POC amplification are ultimately dependent on the availability of POC-friendly nucleic acid extraction methods and amplification readouts, which are also briefly discussed in the review.

Enhanced Specificity in Loop-Mediated Isothermal Amplification with Poly(ethylene glycol)-Engrafted Graphene Oxide for Detection of Viral Genes

Loop-mediated isothermal amplification (LAMP) is a nucleic acid amplification method that allows the simple, quick, and low-cost detection of various viral genes. LAMP assays are susceptible to generating non-specific amplicons, as high concentrations of DNA primers can give rise to primer dimerization and mismatched hybridizations, resulting in false-positive signals. Herein, we reported that poly(ethylene glycol)-engrafted nanosized graphene oxide (PEG-nGO) can significantly enhance the specificity of LAMP, owing to its ability to adsorb single-stranded DNA (ssDNA). By adsorbing surplus ssDNA primers, PEG-nGO minimizes the non-specific annealing of ssDNAs, including erroneous priming and primer dimerization, leading to the enhanced specificity of LAMP. The detection of complementary DNAs transcribed from the hepatitis C virus (HCV) RNA was performed by the PEG-nGO-based LAMP. We observed that the inclusion of PEG-nGO significantly enhances the specificity and sensitivity of the LAMP assay through the augmented difference in fluorescence signals between the target and non-target samples. The PEG-nGO-based LAMP assay greatly facilitates the detection of HCV-positive clinical samples, with superior precision to the conventional quantitative real-time PCR (RT-qPCR). Among the 20 clinical samples tested, all 10 HCV-positive samples are detected as positive in the PEG-nGO-based LAMP, while only 7 samples are detected as HCV-positive in the RT-qPCR. In addition, the PEG-nGO-based LAMP method significantly improves the detection precision for the false-positive decision by 1.75-fold as compared to the LAMP without PEG-nGO. Thus, PEG-nGO can significantly improve the performance of LAMP assays by facilitating the specific amplification of target DNA with a decrease in background signal.

Visual detection of rainbow trout (Oncorhynchus mykiss) and Atlantic salmon (Salmo salar) simultaneously by duplex loop-mediated isothermal amplification

Loop-mediated isothermal amplification (LAMP) is often confounded by the non-specific amplification arising from primer dimers, off-target priming, and other artifacts. Precipitation of the DNA produced during LAMP with the use of specific fluorescently labeled probe has proved the effectiveness in specific detection. Herein, two fluorophores (ROX and FAM) were attached to the primers S-LB-6 and R-FIP for Atlantic salmon and rainbow trout, respectively, which are self-quenched in unbound state and become de-quenched after binding to the dumbbell-shaped DNA specifically. The DNA precipitation and appearance of small sediment took 10 s of centrifugation at 1000 g, by adding polyethylenimine (PEI) 600. Each target species was specifically amplified with the predicted color of PEI-DNA sediment, namely red for Atlantic salmon, green for rainbow trout, and pale yellow for mixed species. The optimized duplex LAMP system has proved its specificity and can detect as little as 1 ng DNA in visual detection.

An improved, simple and field deployable CRISPR-Cas12a assay for detection of SARS-CoV-2

AIMS

The RT-PCR is the most popular confirmatory test for SARS-CoV-2. It is sensitive, but high instrumentation cost makes it difficult for use outside routine clinical setup. This has necessitated development of alternative methods such as CRISPR-based DETECTR method which uses lateral flow technology. Though accurate and sensitive, this method is limited by complex steps and recurrent cost of high quality lateral flow strips. The main goal of this study was to improve the Cas12a-based SARS-CoV-2 DETECTR method and develop a portable and field deployable system to reduce the recurring consumable cost.

METHODS AND RESULTS

Specific regions of N and E genes from SARS-CoV-2 virus and human RNase P (internal control) were reverse transcribed (RT) and amplified by loop-mediated isothermal amplification (LAMP). The amplified products were detected by a Cas12a-based trans-cleavage reaction that generated a fluorescent signal which could be easily visualised by naked eye. Detection of internal control, RNase P gene was improved and optimised by re-designing RT-LAMP primers. Number of steps were reduced by combining the reagents related to detection of Cas12a trans-cleavage reaction into a single ready-to-use mix. A portable, cost-effective battery-operated instrument, CRISPR-CUBE was developed to run the assay and visualise the outcome. The method and instrument were validated using both contrived and patient samples.

CONCLUSIONS

The simplified CRISPR-based SARS-CoV-2 detection and instrument developed in this study, along with improved design for internal control detection allows for easier, more definitive viral detection requiring only reagents, consumables and the battery operable CRISPR-CUBE.

SIGNIFICANCE AND IMPACT OF STUDY

Significant improvement in Cas12 method, coupled with simple visualisation of end-point makes the method and instrument deployable at the point of care for SARS-CoV-2 detection, without any recurrent cost for the lateral flow strips which is used in other POC methods.

Progression of LAMP as a Result of the COVID-19 Pandemic: Is PCR Finally Rivaled?

Reflecting on the past three years and the coronavirus disease 19 (COVID-19) pandemic, varying global tactics offer insights into the most effective public-health responses. In the US, specifically, rapid and widespread testing was quickly prioritized to lower restrictions sooner. Essentially, only two types of COVID-19 diagnostic tests were publicly employed during the peak pandemic: the rapid antigen test and reverse transcription polymerase chain reaction (RT-PCR). However, neither test ideally suited the situation, as rapid antigen tests are far too inaccurate, and RT-PCR tests require skilled personnel and sophisticated equipment, leading to long wait times. Loop-mediated isothermal amplification (LAMP) is another exceptionally accurate nucleic acid amplification test (NAAT) that offers far quicker time to results. However, RT-LAMP COVID-19 tests have not been embraced as extensively as rapid antigen tests or RT-PCR. This review will investigate the performance of current RT-LAMP-based COVID-19 tests and summarize the reasons behind the hesitancy to embrace RT-LAMP instead of RT-PCR. We will also look at other LAMP platforms to explore possible improvements in the accuracy and portability of LAMP, which could be applied to COVID-19 diagnostics and future public-health outbreaks.

CRISPR-Cas12a-Based Diagnostics of Wheat Fungal Diseases

Fusarium head blight (FHB) of wheat, mainly caused by Fusarium graminearum (F. graminearum) infection, reduces crop yield and contaminates grain with mycotoxins. We report a clustered regularly interspaced short palindromic repeats (CRISPR)-Cas12a-based nucleic acid assay for an early and rapid diagnosis of wheat FHB. Guide RNA (gRNA) was screened for highly specific recognition of polymerase chain reaction (PCR) amplicon of the internal transcribed spacer (ITS) region and the transcription elongation factor 1α (EF1α) of F. graminearum. The trans-activation of Cas12a protein cleaves the single-stranded DNA probes with the terminal fluorophore and quencher groups, thus allowing us to report the presence of ITS and EF1α of F. graminearum. Owing to the dual recognition process through PCR primers and gRNA hybridization, the approach realized specific discrimination of F. graminearum from other pathogenic fungi. It also allowed us to detect as low as 1 fg/μL total DNA from F. graminearum, which is sufficient to diagnose a 4 day F. graminearum infection. CRISPR-Cas12a-based nucleic acid assay promises the molecular diagnosis of crop diseases and broadens the application of CRISPR tools.

Kinetics of Isothermal Dumbbell Exponential Amplification: Effects of Mix Composition on LAMP and Its Derivatives

Loop-mediated isothermal amplification (LAMP) is an exponential amplification method of DNA strands that is more and more used for its high performances. Thanks to its high sensitivity and selectivity, LAMP found numerous applications from the detection of pathogens or viruses through their genome amplification to its incorporation as an amplification strategy in protein or miRNA biomarker quantification. The LAMP method is composed of two stages: the first one consists in the transformation of the DNA strands into dumbbell structures formed of two stems and loops thanks to four primers; then, in the second stage, only two primers are required to amplify the dumbbells exponentially in numerous hairpins of increasing lengths. In this paper, we propose a theoretical framework to analyze the kinetics of the second stage of LAMP, the isothermal dumbbell exponential amplification (IDEA) as function of the physico-chemical parameters of the amplification reaction. Dedicated experiments validate the models. We believe these results may help the optimization of LAMP performances by reducing the number of experiments necessary to find the best parameters.