Antimicrobial Carvacrol Incorporated in Flaxseed Gum-Sodium Alginate Active Films to Improve the Quality Attributes of Chinese Sea bass (Lateolabrax maculatus) during Cold Storage

Flow cytometry: Unravelling the real antimicrobial and antibiofilm efficacy of natural bioactive compounds

Flow cytometry (FCM) provides unique information on bacterial viability and physiology, allowing a real-time early warning antimicrobial and antibiofilm monitoring system for preventing the spread risk of foodborne disease. The present work used a combined culture-based and FCM approach to assess the in vitro efficacy of essential oils (EOs) from condiment plants commonly used in Mediterranean Europe (i.e., thyme EO, oregano EO, basil EO, and lemon EO) against planktonic and sessile cells of food-pathogenic Listeria monocytogenes 56 LY, and contaminant and alterative species Escherichia coli ATCC 25922 and Pseudomonas fluorescens ATCC 13525. Evaluation of the bacterial response to the increasing concentrations of natural compounds posed FCM as a crucial technique for the quantification of the live/dead, and viable but non-culturable (VBNC) cells when antimicrobial agents exert no real bactericidal action. Furthermore, the FCM results displayed higher numbers of viable bacteria expressed as Active Fluorescent Units (AFUs) with a greater level of repeatability compared with outcomes of the plate-count method. Overall, accurate counting of viable microbial cells is a critically important parameter in food microbiology, and flow cytometry provides an innovative approach with high-throughput potential for applications in the food industry as "flow microbiology".

Effect of tea polyphenol-trehalose complex coating solutions on physiological stress and flesh quality of marine-cultured Turbot Scophthalmus maximus during waterless transport

OBJECTIVE

The waterless transport of live fish has changed the present situation of live-fish transport. However, the waterless transport environment may cause stress in fish. This research evaluated the effect of tea polyphenol-trehalose (TPT) coating solutions on Turbot Scophthalmus maximus during waterless transport.

METHODS

After cold acclimation, Turbot were coated and subsequently transported in a waterless environment for 18 h. Physiological and biochemical parameters were measured, including lysozyme (LZM) and immunoglobulin M (IgM) activities, serum creatinine (Cr) and uric acid (UA) concentrations, and nutritional flavor.

RESULT

The results showed that the nonspecific immunity of Turbot was inhibited during the waterless transport; the LZM activity first increased and then decreased, and the serum Cr and UA concentrations significantly increased. In addition, the waterless transport promoted the breakdown of Turbot flesh proteins, leading to changes in nucleotides and free amino acids (FAAs). After waterless transport, the LZM and IgM activities in the TPT-treated Turbot were higher than those in the control group (CK), and the changes in FAA content and nucleotides were smaller than those observed in the CK group.

CONCLUSION

This study shows that the use of TPT coating solution can reduce the impact of waterless transportation stress on the immune and metabolic functions of Turbot and can maintain the meat quality and flavor of Turbot.

Unveiling the potential of linseed mucilage, its health benefits, and applications in food packaging

Industrial waste products derived from the oil industry often contain valuable substances and elements with great potential. These by-products can be used for various purposes, including as nutrients, bioactive compounds, fuels, and polymers. Linseed mucilage (LM) is one such example of a beneficial by-product obtained from linseed. It possesses favorable chemical and functional properties, depending on its method of extraction. Different pretreatments, such as enzymatic extraction, microwave-assisted extraction, pulse electric field, and ultrasound-assisted extraction, have been explored by various researchers to enhance both the yield and quality of mucilage. Furthermore, LM has exhibited therapeutic effects in the treatment of obesity, diabetes, constipation, hyperlipidemia, cancer, and other lifestyle diseases. Additionally, it demonstrates favorable functional characteristics that make it suitable to be used in bioplastic production. These properties preserve food quality, prolong shelf life, and confer antimicrobial activity. It also has the potential to be used as a packaging material, especially considering the increasing demand for sustainable and biodegradable alternatives to plastics because of their detrimental impact on environmental health. This review primarily focuses on different extraction techniques used for linseed mucilage, its mechanism of action in terms of health benefits, and potential applications in food packaging.

The Effects of Acute Exposure to Ammonia on Oxidative Stress, Hematological Parameters, Flesh Quality, and Gill Morphological Changes of the Large Yellow Croaker (Larimichthys crocea)

Ammonia is considered to be the major chemical pollutant causing fish poisoning in aquaculture. This research aimed to evaluate the impact of acute ammonia exposure on the large yellow croaker's meat quality, gill morphology, liver oxidative stress, and hematological parameters. The fish were exposed to total ammonia nitrogen concentrations of 0, 2.96, 5.92, and 8.87 mg/L for 48 h, respectively. The findings demonstrated that all ammonia-exposed fish had higher liver lactate dehydrogenase and glutamic oxalate transaminase activities. The glucose, blood urea nitrogen, and creatinine levels in 8.87 mg/L total ammonia nitrogen (TAN) were higher than other samples. The total protein, albumin, and triglyceride levels in serum decreased significantly in ammonia-exposed samples. After 48 h of ammonia exposure, superoxide dismutase activities showed a 76.1%, 118.0%, and 156.8% increase when fish were exposed to 2.96, 5.92, and 8.87 mg/L TAN, respectively. Catalase activities and glutathione contents were considerably higher (p < 0.05) in all ammonia-treated samples compared to 0 mg/L TAN. The ammonia-treated gill lamellae become thicker, shorter, and curved. Additionally, the ammonia exposure resulted in the accumulation of free amino acids and the loss of nucleotides. The inosine monophosphate and adenosine monophosphate contents in the flesh were decreased after 12 h of exposure to 2.96, 5.92, and 8.87 mg/L ammonia compared to the control group. Overall, large yellow croakers exposed to ammonia for 6 h presented not only changes in serum composition but also oxidative stress, liver and gill tissue damage and flesh quality deterioration.

Nanocomposites of cellulose nanofibers incorporated with carvacrol via stabilizing octenyl succinic anhydride-modified ɛ-polylysine

Food packaging plays an extremely important role in the global food chain, allowing for products to be shipped across long distances without spoiling. However, there is an increased need to both reduce plastic waste caused by traditional single-use plastic packaging and improve the overall functionality of packaging materials to extend shelf-life even further. Herein, we investigate composite mixtures based on cellulose nanofibers and carvacrol via stabilizing octenyl-succinic anhydride-modified epsilon polylysine (MɛPL-CNF) for active food packaging applications. The effects of epsilon polylysine (εPL) concentration and modification with octenyl-succinic anhydride (OSA) and carvacrol are evaluated with respect to composites morphology, mechanical, optical, antioxidant, and antimicrobial properties. We find that both increased εPL concentration and modification with OSA and carvacrol lead to films with increased antioxidant and antimicrobial properties, albeit at the expense of reduced mechanical performance. Importantly, when sprayed onto the surface of sliced apples, MεPL-CNF-mixtures are able to successfully delay/hinder enzymatic browning, suggesting the potential of such materials for a range of active food packaging applications.

Carvacrol-A Natural Phenolic Compound with Antimicrobial Properties

The main purpose of this article is to present the latest research related to selected biological properties of carvacrol, such as antimicrobial, anti-inflammatory, and antioxidant activity. As a monoterpenoid phenol, carvacrol is a component of many essential oils and is usually found in plants together with its isomer, thymol. Carvacrol, either alone or in combination with other compounds, has a strong antimicrobial effect on many different strains of bacteria and fungi that are dangerous to humans or can cause significant losses in the economy. Carvacrol also exerts strong anti-inflammatory properties by preventing the peroxidation of polyunsaturated fatty acids by inducing SOD, GPx, GR, and CAT, as well as reducing the level of pro-inflammatory cytokines in the body. It also affects the body's immune response generated by LPS. Carvacrol is considered a safe compound despite the limited amount of data on its metabolism in humans. This review also discusses the biotransformations of carvacrol, because the knowledge of the possible degradation pathways of this compound may help to minimize the risk of environmental contamination with phenolic compounds.

Application of alginate polymer films and coatings incorporated with essential oils in foods: a review of recent literature with emphasis on nanotechnology

Food waste is one of the major challenges in food safety and finding a solution for this issue is critically important. Herein, edible films and coatings became attractive for scientists as they can keep food from spoilage. Edible films and coatings can effectively preserve the original quality of food and extend its shelf life. Polysaccharides, including starch and cellulose derivatives, chitosan, alginate and pectin, have been extensively studied as biopackaging materials. One of the most interesting polysaccharides is alginate, which has been used to make edible films and coatings. Incorporating essential oils (EO) in alginate matrices results in an improvement in some properties of the edible packages, such as antioxidant and antimicrobial properties. Additionally, the use of nanotechnology can improve the desirable properties of edible films and coatings. In this article we reviewed the antimicrobial and antioxidant properties of alginate coatings and films and their use in various food products.

Effects of grape seed oil nanoemulsion on physicochemical and antibacterial properties of gelatin‑sodium alginate film blends

The present study aimed to evaluate the impact of incorporating grape seed oil (GSO) nanoemulsion (NE) at varying concentrations into the film matrix on the physicochemical and antimicrobial properties of the resulting films. In this study, ultrasonic treatment was used to prepare GSO-NE, and different levels (2, 4, and 6 %) of nanoemulsioned GSO were incorporated into gelatin (Ge)/sodium alginate (SA)-based films to produce films with improved physical and antibacterial properties. The results revealed that incorporation of GSO-NE at 6 % concentration decreased the tensile strength (TS) and puncture force (PF) significantly (p < 0.05). The whiteness index (WI) of the films decreased from 63.4 to 47.79, while the total color change (ΔE) increased significantly (p < 0.05) with the increase in GSO-NE concentration. Thermogravimetric analysis (TGA) results showed that GSO-NE at different concentrations had improved the thermal stability of Ge/SA-based films. The incorporation of GSO-NE into the films led to the formation of a slightly porous structure. The incorporation of GSO-NE at 4 and 6 % concentrations decreased the water vapor permeability (WVP), moisture content (MC) %, and water solubility (WS) % significantly (p < 0.05). All composite films exhibited hydrophobic surfaces with contact angles θ > 90°. Ge/SA/GSO-NE films were found to be effective against both Gram-positive and Gram-negative bacteria. The prepared active films containing GSO-NE had a high potential for preventing food spoilage in food packaging.

Pepsin and Trypsin Treatment Combined with Carvacrol: An Efficient Strategy to Fight Pseudomonas aeruginosa and Enterococcus faecalis Biofilms

Biofilms consist of microbial communities enclosed in a self-produced extracellular matrix which is mainly responsible of biofilm virulence. Targeting this matrix could be an effective strategy to control biofilms. In this work, we examined the efficacy of two proteolytic enzymes, pepsin and trypsin, to degrade P. aeruginosa and E. faecalis biofilms and their synergistic effect when combined with carvacrol. The minimum dispersive concentrations (MDCs) and the contact times of enzymes, as well as the minimal inhibitory concentrations (MICs) and contact times of carvacrol, were determined against biofilms grown on polystyrene surfaces. For biofilms grown on stainless steel surfaces, the combined pepsin or trypsin with carvacrol treatment showed more significant reduction of both biofilms compared with carvacrol treatment alone. This reduction was more substantial after sequential treatment of both enzymes, followed by carvacrol with the greatest reduction of 4.7 log CFU mL−1 (p < 0.05) for P. aeruginosa biofilm and 3.3 log CFU mL−1 (p < 0.05) for E. faecalis biofilm. Such improved efficiency was also obvious in the epifluorescence microscopy analysis. These findings demonstrate that the combined effect of the protease-dispersing activity and the carvacrol antimicrobial activity could be a prospective approach for controlling P. aeruginosa and E. faecalis biofilms.

A new insight to explore toxic Cd(II) affecting denitrification: Reaction kinetic, electron behavior and microbial community

Denitrification process is a crucial step in nitrogen removal and is more vulnerable to external shocks due to the fact that anoxic process is always located before aerobic process in conventional sewage treatment. This study aims to elaborate the nitrogen conversion characteristics by investigating denitrification kinetics, electron behavior and microbial community under Cd(II) shock. Reaction kinetics showed that 10 mg/L of Cd(II) accelerated nitrate reduction rate by 52.29% but 80 mg/L of Cd(II) severely decelerated it by 95.41% with the accumulation of nitrite. High concentration of COD (C/N = 10.4) in the system caused by Cd(II) disrupting the integrity of cell membrane (lactate dehydrogenase increased by 328.7%) was proved to induce occurrence of Dissimilatory Nitrate Reduction to Ammonia (DNRA). The electron transport system activity (ETSA), electron consumption and electron distribution were combined to reveal the electron behavior regulated by Cd(II). The electron ratio of nitrate reductase to nitrite reductase increased from 1.48 (control) to 3.91 and 3.52 (40 and 80 mg/L of Cd(II)) indicated the electrons allocating tendency and further explained the nitrite accumulation. High concentration of Cd(II) also decreased ETSA by weakening the physiological activities of flavin adenine dinucleotide, flavin mononucleotide and cytochrome c or hindered the microbes to secrete these electron carriers. Furthermore, Cd(II) inhibited dominant bacteria genera containing napA gene (Azospirillum and Thauera) and nirS gene (unclassified_c_Betaproteobacteria). Enterobacteriaceae family was found to dominate the DNRA process.

A Review of Extraction Techniques and Food Applications of Flaxseed Mucilage

Flaxseed contains significant concentration of mucilage or gum (a type of hydrocolloid). Flaxseed mucilage (FM) predominantly occurs in the outermost layer of the seed’s hull and is known to possess numerous health benefits such as delayed gastric emptying, reduced serum cholesterol, and improved glycemic control. FM is typically composed of an arabinoxylan (neutral in nature) and a pectic-like material (acidic in nature). Similar to gum arabic, FM exhibits good water-binding capacity and rheological properties (similar functionality); therefore, FM can be used as its replacement in foods. In this review, an overview of methods used for FM extraction and factors influencing the extraction yield were discussed initially. Thereafter, food applications of FM as gelling agent/gel-strengthening agent, structure-forming agent, stabilizing agent, fat replacer, anti-retrogradation agent, prebiotic, encapsulating agent, edible coatings and films/food packaging material, and emulsifier/emulsion stabilizer were included. At the end, some limitations to its wide application and potential solutions were added.

Chemical Composition and Rheological Properties of Seed Mucilages of Various Yellow- and Brown-Seeded Flax (Linum usitatissimum L.) Cultivars

When seeds sown in the soil become wet, their hulls secrete viscous matter that can retain water and thus support germination. Flaxseed mucilage (FSM) is an example of such a material and is attractive for food, cosmetic, and pharmaceutical applications due to its suitable rheological properties. FSM consists mainly of two polysaccharides, namely, arabinoxylan and rhamnogalacturonan I, and it also contains some proteins, minerals, and phenolic compounds. The genotype and the year of the flax harvest can significantly affect the composition and functional properties of FSM. In this work, FSM samples were isolated from flax seeds of different cultivars and harvest years, and their structural and rheological properties were compared using statistical methods. The samples showed significant variability in composition and rheological properties depending on the cultivar and storage time. It was found that the ratio of two polysaccharide fractions and the contribution of less-prevalent proteins are important factors determining the rheological parameters of FSM, characterizing the shear-thinning, thixotropic, and dynamic viscoelastic behavior of this material in aqueous solutions. The yield strength and the hysteresis loop were found to be associated with the contribution of the pectin fraction, which included homogalacturonan and rhamnogalacturonan I. In contrast, the shear-thinning and especially the dynamic viscoelastic properties depended on the arabinoxylan content. Proteins also affected the viscoelastic properties and maintained the elastic component of FSM in the solution. The above structural and rheological characteristics should be taken into account when considering effective applications for this material.

Essential oil for the control of fungi, bacteria, yeasts and viruses in food: an overview

This review begins with a general introduction to essential oils (EO) and their relation to food and microorganisms. Classification and characteristics of EO, addressing the major compounds with antimicrobial action. Subsequently, the main microorganisms followed by a collection of the main works published in recent years that approached the influence of the EO on the protection against microorganisms and food decontamination. At last, the major gaps and future perspectives on the subject. Using EO for fighting food contamination is a way of sustainably supplying the need for new antimicrobials to ensure microbial safety and is a viable source to solve the problem of current microbial resistance. Form of application, EO composition and microbiological load are reported as the responsible factors for the treatment's success. The EO's effects on fungi and bacteria are already well known, but its effect on viruses and yeasts is something to be explored.

Integrating diverse plant bioactive ingredients with cyclodextrins to fabricate functional films for food application: a critical review

The popularity of plant bioactive ingredients has become increasingly apparent in the food industry. However, these plant bioactive ingredients have many deficiencies, including low water solubility, poor stability, and unacceptable odor. Cyclodextrins (CDs), as cyclic molecules, have been extensively studied as superb vehicles of plant bioactive ingredients. These CD inclusion compounds could be added into various film matrices to fabricate bioactive food packaging materials. Therefore, in the present review, we summarized the extraction methods of plant bioactive ingredients, the addition of these CD inclusion compounds into thin-film materials, and their applications in food packaging. Furthermore, the release model and mechanism of active film materials based on various plant bioactive ingredients with CDs were highlighted. Finally, the current challenges and new opportunities based on these film materials have been discussed.

Cyclodextrins, Natural Compounds, and Plant Bioactives-A Nutritional Perspective

Cyclodextrins (CDs) are a group of cyclic oligosaccharides produced from starch or starch derivatives. They contain six (αCD), seven (βCD), eight (γCD), or more glucopyranose monomers linked via α-1,4-glycosidic bonds. CDs have a truncated cone shape with a hydrophilic outer wall and a less hydrophilic inner wall, the latter forming a more apolar internal cavity. Because of this special architecture, CDs are soluble in water and can simultaneously host lipophilic guest molecules. The major advantage of inclusion into CDs is increased aqueous solubility of such lipophilic substances. Accordingly, we present studies where the complexation of natural compounds such as propolis and dietary plant bioactives (e.g., tocotrienol, pentacyclic triterpenoids, curcumin) with γCD resulted in improved stability, bioavailability, and bioactivity in various laboratory model organisms and in humans. We also address safety aspects that may arise from increased bioavailability of plant extracts or natural compounds owing to CD complexation. When orally administered, α- and βCD—which are inert to intestinal digestion—are fermented by the human intestinal flora, while γCD is almost completely degraded to glucose units by α-amylase. Hence, recent reports indicate that empty γCD supplementation exhibits metabolic activity on its own, which may provide opportunities for new applications.

Preparation and Characterization of Carboxymethyl Cellulose-Based Bioactive Composite Films Modified with Fungal Melanin and Carvacrol

Preparation of biodegradable packaging materials and valorisation of food industry residues to achieve "zero waste" goals is still a major challenge. Herein, biopolymer-based (carboxymethyl cellulose-CMC) bioactive films were prepared by the addition, alone or in combination, of carvacrol and fungal melanin isolated from champignon mushroom (Agaricus bisporus) agro-industrial residues. The mechanical, optical, thermal, water vapour, and UV-Vis barrier properties were studied. Fourier-transform infrared (FT-IR) spectroscopy studies were carried out to analyse the chemical composition of the resulting films. Antibacterial, antifungal, and antioxidant activities were also determined. Both CMC/melanin and CMC/melanin/carvacrol films showed some antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans. The addition of melanin increased the UV-blocking, mechanical, water vapour barrier, and antioxidant properties without substantially reducing the transparency of the films. The addition of carvacrol caused loss of transparency, however, composite CMC/melanin/carvacrol films showed excellent antioxidant activity and enhanced mechanical strength. The developed bioactive biopolymer films have a good potential to be green bioactive alternatives to plastic films in food packaging applications.

Synergistic Antimicrobial Effectiveness of Plant Essential Oil and Its Application in Seafood Preservation: A Review

The synergistic potential of plant essential oils (EOs) with other conventional and non-conventional antimicrobial agents is a promising strategy for increasing antimicrobial efficacy and controlling foodborne pathogens. Spoilage microorganisms are one of main concerns of seafood products, while the prevention of seafood spoilage principally requires exclusion or inactivation of microbial activity. This review provides a comprehensive overview of recent studies on the synergistic antimicrobial effect of EOs combined with other available chemicals (such as antibiotics, organic acids, and plant extracts) or physical methods (such as high hydrostatic pressure, irradiation, and vacuum-packaging) utilized to reduce the growth of foodborne pathogens and/or to extend the shelf-life of seafood products. This review highlights the synergistic ability of EOs when used as a seafood preservative, discovering the possible routes of the combined techniques for the development of a novel seafood preservation strategy.

TMT-Based Quantitative Proteomics Analysis of the Fish-Borne Spoiler Shewanella putrefaciens Subjected to Cold Stress Using LC-MS/MS

Shewanella putrefaciens is a specific spoilage bacterium for fish during cold storage. To better understand the molecular mechanisms of cold stress adaptation of S. putrefaciens, tandem mass tag- (TMT-) based quantitative proteomic analysis was performed to detect the effects of cold stress on protein expression profiles in S. putrefaciens which had been cultivated at 4°C and 30°C, respectively. A total of 266670 peptide spectrum matching numbers were quantified proteins after data analysis. Of the 2292 proteins quantitatively analyzed, a total of 274 were found to be differentially expressed (DE) under cold stress compared with the nonstress control. By integrating the results of Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses, 9 common KEGG terms were found notable for the cold-responsive proteins. Generally, the DE proteins involved in carbohydrate, amino acid, and fatty acid biosynthesis and metabolism were significantly upregulated, leading to a specific energy conservation survival mode. The DE proteins related to DNA repair, transcription, and translation were upregulated, implicating change of gene expression and more protein biosynthesis needed in response to cold stress.

Elucidating Antibacterial Activity and Mechanism of Daphnetin against Pseudomonas fluorescens and Shewanella putrefaciens

In this research, the antibacterial activity and mechanism of daphnetin against Pseudomonas fluorescens and Shewanella putrefaciens were evaluated. The minimum inhibitory concentration (MIC) of daphnetin on P. fluorescens and S. putrefaciens was 0.16 and 0.08 mg·mL−1, respectively. The growth curve test also showed that daphnetin had a good antibacterial effect. The results of intracellular component leakage and cell viability analysis illustrated that daphnetin destroyed the morphology of the cell membrane. According to scanning electron microscope and transmission electron microscope observations, the treated bacterial cells displayed obvious morphological and ultrastructural changes in the cell membrane of the two tested strains, whichconfirmed daphnetin’s damage to the integrity of the cell membrane. The findings indicated that daphnetin mainly exerted its antibacterial effect by destroying the membrane and suggested that it had good potential to be as a natural food preservative.

Use of Spectroscopic Techniques to Monitor Changes in Food Quality during Application of Natural Preservatives: A Review

Consumer demand for food of high quality has driven research for alternative methods of food preservation on the one hand, and the development of new and rapid quality assessment techniques on the other hand. Recently, there has been a growing need and interest in healthier food products, which has led to an increased interest in natural preservatives, such as essential oils, plant extracts, and edible films and coatings. Several studies have shown the potential of using biopreservation, natural antimicrobials, and antioxidant agents in place of other processing and preservation techniques (e.g., thermal and non-thermal treatments, freezing, or synthetic chemicals). Changes in food quality induced by the application of natural preservatives have been commonly evaluated using a range of traditional methods, including microbiology, sensory, and physicochemical measurements. Several spectroscopic techniques have been proposed as promising alternatives to the traditional time-consuming and destructive methods. This review will provide an overview of recent studies and highlight the potential of spectroscopic techniques to evaluate quality changes in food products following the application of natural preservatives.

Repositioning Natural Antioxidants for Therapeutic Applications in Tissue Engineering

Although a large panel of natural antioxidants demonstrate a protective effect in preventing cellular oxidative stress, their low bioavailability limits therapeutic activity at the targeted injury site. The importance to deliver drug or cells into oxidative microenvironments can be realized with the development of biocompatible redox-modulating materials. The incorporation of antioxidant compounds within implanted biomaterials should be able to retain the antioxidant activity, while also allowing graft survival and tissue recovery. This review summarizes the recent literature reporting the combined role of natural antioxidants with biomaterials. Our review highlights how such functionalization is a promising strategy in tissue engineering to improve the engraftment and promote tissue healing or regeneration.

Effect of Sonication on the Properties of Flaxseed Gum Films Incorporated with Carvacrol

Carvacrol is a natural compound known to be a highly effective antibacterial; however, it is a hydrophobic molecule, which is a limitation to its use within food packaging. Flaxseed gum (FG) films containing different contents of carvacrol (C) were produced by a film-casting method with sonication. The effects of sonication power and time on the properties of the FG-C films were investigated by measuring the film thickness, mechanical properties, contact angle, opacity, water vapor permeability (WVP), water sorption isotherm, Fourier transform infrared spectroscopy(FTIR), differential scanning calorimetry (DSC), antibacterial and antioxidant activities, and microstructure. The results showed that sonication power and time had significant effects on mechanical and barrier properties, film opacity, and degradability (p < 0.05). The tensile strength (TS) and elongation at break (EB) values exhibited an obvious improvement after sonication, and FG-0.5C-6030 had the lowest TS (33.40 MPa) and EB (4.46%) values. FG-C films formed a denser structure and the contact angle was improved as a result of sonication, which improved the integration of carvacrol into the FG matrix. In terms of microstructure, sonication resulted in a homogeneous and continuous crosssection of FG-C films, and regular surface and cross-sectional images were obtained through the highest acoustic intensity and longest time treatment. The FG films incorporated with carvacrol displayed antibacterial properties against Staphylococcus aureus, Vibrio parahaemolyticus, Shewanella putrefaciens, and Pseudomonas fluorescens, as well as increased antioxidant properties, and sonication was proven to enhance both of them.

Effects of Ascorbic Acid and β-1,3-Glucan on Survival, Physiological Response and Flesh Quality of Cultured Tiger Grouper (Epinephelus fuscoguttatus) during Simulated Transport in Water

Transport in water is the most common method for achieving high survival rates when transporting cultured fish in China; yet, transport success relies on proper water quality and conditions. This research was designed to explore the effects of ascorbic acid and β-1,3-glucan on survival, physiological responses, and flesh quality of farmed tiger grouper (Epinephelus fuscoguttatus) during simulated transport. The transport water temperature for live tiger grouper was 15 °C, which had the highest survival rate, the lowest stress response, and metabolic rate, and this will reduce the susceptibility to diseases. It is stated that β-1,3-glucan influences the changes of cortisol content, heat shock protein 70, IL-1β, and IgM transcription levels during simulated transport. Rather than using ascorbic acid alone (the A-group), β-1,3-glucan (3.2 mg/L) in the presence of ascorbic acid (25 mg/L) can effectively reduce the increase of transport-induced serum cortisol content, heat shock protein 70, and IL-1β, but stimulated IgM. 25 mg/L ascorbic acid and 3.2 mg/L β-1,3-glucan had no obvious effect on the nutritional indexes and flavor of live tiger grouper; however, these can effectively reduce the stress response, improve the innate immune activity, and ensure a higher survival rate.

Preservative Effects of Gelatin Active Coating Containing Eugenol and Higher CO2 Concentration Modified Atmosphere Packaging on Chinese Sea bass (Lateolabrax maculatus) during Superchilling (-0.9 °C) Storage

The purpose of this research was to explore the fresh keeping effect of modified atmosphere packaging (MAP) with different gas ratios combined with gelatin active coatings containing eugenol on Chinese sea bass stored at −0.9 °C for 36 days. The results showed that MAP3 (60% CO₂/10% O₂/30% N₂), together with gelatin active coatings containing eugenol, could prevent water loss, which maintained high field NMR, MRI, and organoleptic evaluation results. This hurdle technology could also effectively delay the bacterial reproduction, protein degradation, and alkaline accumulation, so it showed the lowest K value, total volatile basic nitrogen, free amino acids, total viable count, Pseudomonas spp., and H₂S-producing bacteria, which better maintain the quality of sea bass.

Development of Starch-Based Antifungal Coatings by Incorporation of Natamycin/Methyl-β-Cyclodextrin Inclusion Complex for Postharvest Treatments on Cherry Tomato against Botrytis cinerea

The application of natamycin as a natural fungicide in edible coatings is challenging because of its low aqueous solubility. In this study, the natamycin/methyl-β-cyclodextrin (N/ME-β-CD) inclusion complex was fabricated and incorporated into waxy corn starch-based coatings for postharvest treatments. The phase solubility of natamycin in the presence of ME-β-CD at 293.2 K, 303.2 K, and 313.2 K is determined and used to calculate the process thermodynamic parameters. The N/ME-β-CD inclusion complex was confirmed and characterized by FTIR and 1H NMR spectroscopy. The results indicated that the inclusion complex was formed and the hydrophobic part (C16-C26) of natamycin might be partially inserted into the cavity of ME-β-CD form the wide rim. The effects of N/ME-β-CD incorporated starch-based coatings (N/ME-β-CD S coatings) on postharvest treatments of cherry tomatoes were evaluated in vivo. The N/ME-β-CD S coatings could reduce weight loss, delay fruit ripening, and inhibit fruit decay caused by Botrytis cinerea in tomato fruit during storage.