Appraisal of Comparative Therapeutic Potential of Undoped and Nitrogen-Doped Titanium Dioxide Nanoparticles

Antioxidant, insecticidal activity and chemical profiling of flower's extract of Parthenium weed (Parthenium hysterophorus L.)

Parthenium hysterophorus L., an invasive alien species and notorious weed, offers various benefits to the medical and agrochemical industries. This study aimed to evaluate the antioxidant and insecticidal activities of P. hysterophorus flower extract and conduct chemical profiling to identify the phytoconstituents responsible for these biological effects. The antioxidant activity was assessed using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay, while gas chromatography mass spectrometry (GCMS) analysis was employed for chemical configuration evaluation. Our findings demonstrate that the dichloromethane (DCM) extract of P. hysterophorus exhibits potent radical scavenging activity (95.03%). Additionally, phytochemical analysis revealed significant amounts of phenols and flavonoids in the distilled water and ethyl acetate extracts (103.30 GAEg-1 and 138.67 QEg-1, respectively). In terms of insecticidal activity, the flower extract displayed maximum mortality rates of 63.33% and 46.67% after 96 hours of exposure at concentrations of 1000 μgmL-1 and 800 μgmL-1, respectively, with similar trends observed at 72 hours. Furthermore, the P. hysterophorus extracts exhibited LC50 values of 1446 μgmL-1 at 72 hours and 750 μgmL-1 at 96 hours. Imidacloprid, the positive control, demonstrated higher mortality rates at 96 hours (97.67%) and 72 hours (91.82%). Moreover, the antioxidant activity of P. hysterophorus extracts exhibited a strong correlation with phenols, flavonoids, and extract yield. GCMS analysis identified 13 chemical compounds, accounting for 99.99% of the whole extract. Ethanol extraction yielded the highest percentage of extract (4.34%), followed by distilled water (3.22%), ethyl acetate (3.17%), and dichloromethane (2.39%). The flower extract of P. hysterophorus demonstrated significant antioxidant and insecticidal activities, accompanied by the presence of valuable chemical compounds responsible for these biological effects, making it a promising alternative to synthetic agents. These findings provide a novel and fundamental basis for further exploration in purifying the chemical compounds for their biological activities.

A comprehensive review on potential applications of metallic nanoparticles as antifungal therapies to combat human fungal diseases

Human pathogenic fungi are responsible for causing a range of infection types including mucosal, skin, and invasive infections. Life-threatening and invasive fungal infections (FIs) are responsible for mortality and morbidity, especially for individuals with compromised immune function. The number of currently available therapeutic agents against invasive FIs is limited compared to that against bacterial infections. In addition, the increased mortality and morbidity caused by FIs are linked to the limited number of available antifungal agents, antifungal resistance, and the increased toxicity of these agents. Currently available antifungal agents have several drawbacks in efficiency, efficacy, toxicity, activity spectrum, and selectivity. It has already been demonstrated with numerous metallic nanoparticles (MNPs) that these nanoparticles can serve as an effective and alternative solution as fungicidal agents. MNPs have great potential owing to their intrinsic antifungal properties and potential to deliver antifungal drugs. For instance, gold nanoparticles (AuNPs) have the capacity to disturb mitochondrial calcium homeostasis induced AuNP-mediated cell death in Candida albicans. In addition, both copper nanoparticles and copper oxide nanoparticles exerted significant suppressive properties against pathogenic fungi. Silver nanoparticles showed strong antifungal properties against numerous pathogenic fungi, such as Stachybotrys chartarum, Mortierella alpina, Chaetomium globosum, A. fumigatus, Cladosporium cladosporioides, Penicillium brevicompactum, Trichophyton rubrum, C. tropicalis, and C. albicans. Iron oxide nanoparticles showed potent antifungal activities against A. niger and P. chrysogenum. It has also been reported that zinc oxide nanoparticles can significantly inhibit fungal growth. These NPs have already exerted potent antifungal properties against a number of pathogenic fungal species including Candida, Aspergillus, Fusarium, and many others. Several strategies are currently used for the research and development of antifungal NPs including chemical modification of NPs and combination with the available drugs. This review has comprehensively presented the current and innovative antifungal approach using MNPs. Moreover, different types of MNPs, their physicochemical characteristics, and production techniques have been summarized in this review.

Genetic effects of chemically and biosynthesized titanium dioxide nanoparticles in vitro and in vivo of female rats and their fetuses

With the increase in nanoparticles (NPs) products on the market, the possibility of animal and human exposure to these materials will increase. The smaller size of NPs facilitates their entrance through placental barriers and allows them to accumulate in embryonic tissue, where they can then be a source of different developmental malformations. Several toxicity studies with chemically synthesized titanium dioxide NPs (CTiO2 NPs) have been recently carried out; although there is insufficient data on exposure to biosynthesized titanium dioxide NPs (BTiO2 NPs) during pregnancy, the study aimed to evaluate the ability of an eco-friendly biosynthesis technique using garlic extract against maternal and fetal genotoxicities, which could result from repeated exposure to TiO2 NPs during gestation days (GD) 6-19. A total of fifty pregnant rats were divided into five groups (n = 10) and gavaged CTiO2 NPs and BTiO2 NPs at 100 and 300 mg/kg/day concentrations. Pregnant rats on GD 20 were anesthetized, uterine horns were removed, and then embryotoxicity was performed. The kidneys of the mothers and fetuses in each group were collected and then maintained in a frozen condition. Our results showed that garlic extract can be used as a reducing agent for the formation of TiO2 NPs. Moreover, BTiO2 NPs showed less toxic potential than CTiO2 NPs in HepG2 cells. Both chemically and biosynthesized TiO2 NP-induced genetic variation in the 16S rRNA sequences of mother groups compared to the control group. In conclusion, the genetic effects of the 16S rRNA sequence induced by chemically synthesized TiO2 NPs were greater than those of biosynthesized TiO2 NPs. However, there were no differences between the control group and the embryo-treated groups with chemically and biologically synthesized TiO2 NPs.

Synthesis of phytostabilized zinc oxide nanoparticles and their effects on physiological and anti-oxidative responses of Zea mays (L.) under chromium stress

Chromium (Cr) is a hazardous metal that has a significant risk of transfer from soil to edible parts of food crops, including shoot tissues. Reduction of Cr accumulation is required to lower the risk of Cr-exposed in humans and animals feeding on metal-contaminated parts of such plant. Zea mays is a global staple crop irrigated intensively with Cr-contaminated water. Consequently, the objective of this study was to investigate that FI-stabilized ZnO NPs could be used as an eco-friendly and efficient amendment to reduced Cr uptake and toxicity in Zea mays. To investigate the growth parameters, physiological, oxidative stress and biochemical parameters under different Cr-VI concentrations (10.0, 15.0, and 20.0 ppm). Cr exposed Z. mays plants exhibited substantially reduced plant biomass, chlorophyll contents, and altered antioxidant enzyme activity compared to untreated control. The results revealed that foliar application of Fagonia-ZnO-NPs helps eliminate the harmful effects of Cr (VI), which can enter plants through soil pollution. Increased levels of proline, soluble sugars and various antioxidant enzymes reflected this. Mean comparisons showed that Cr stress led to a 33-50% reduction in fresh shoot weight, 73-170% in fresh root weight, 16-34% shoot length, 9.5-129% root length, Chlorophyll contents 20-33% (Chl a), 18-27% (Chl b) and 17-27% (car), 14-33% total soluble sugars, 54-170% proline content, 7-7.5% POD, 0.66-75% CAT and 32-77% APX enzyme activities compared to untreated plants. Application of FI-stabilized ZnO NPs led to an increase 21-77% in fresh shoot weight, 22-45%, fresh root weight, 3-35% shoot length, 24-154% root length, Chlorophyll contents 39-60% (Chl a), 15-79% (Chl b) and 28-82% (car), 19-52% total soluble sugars, 21-55% proline content, 14-43% POD, 34-95% CAT and 130-186% APX enzyme activities under 10, 15 and 20 ppm Cr stress respectively, compared to Cr-treated plants. However, the principal component analysis revealed that chlorophyll contents, carotenoid, CAT, APX and length were in the same group and showed a positive correlation. These data collectively suggest that phytostabilized zinc oxide NPs may be an eco-friendly solution to mitigate Cr toxicity in agricultural soils and crop plants.

Phytochemical and physiological reactions of feverfew (Tanacetum parthenium (L.) Schultz Bip) to TiO2 nanoparticles

Nanomaterials can be used as elicitors for improving the biosynthesis of secondary metabolites in medicinal plants. The present study was conducted to assay the titanium dioxide-nanoparticles (TiO₂-NPs) effects on feverfew (Tanacetum parthenium) as an anti-cancer plant. The study showed that TiO₂-NPs application increased the amounts of the main compounds and oxygenated monoterpene in essential oils, thereby causing an improvement in the quantity and quality of the essential oils compared to control. The highest effect was related to 1500 ppm TiO₂-NPs concentration. Regarding parthenolide, TiO₂-NPs had no positive effect on parthenolide content and the highest content was observed in control. Increasing the concentrations over 1500 ppm resulted in a decrease in chlorophyll content, capitule diameter, flower yield, and harvest index compared to other concentrations and control. Additionally, the results indicated that TiO₂-NPs foliar spray reduced flower number, biological yield, fresh weight, and dry weights compared with untreated plants. The increase in quality and content of essential oil and lack of increase in parthenolide content, and reproductive and vegetative characteristics showed that TiO₂-NPs mainly affected the content and composition of essential oil. Totally, the application of TiO2-NPs in terms of positive effect on the yield and metabolites (without damaging biological effects) can be recommended and followed up to the concentration of 1000 ppm. Overall, the results indicated that improving the synthesis of valuable medicinal metabolites using TiO₂-NPs has promising results depending on the type of species, concentration used and target metabolites.

Phyto-interactive impact of green synthesized iron oxide nanoparticles and Rhizobium pusense on morpho-physiological and yield components of greengram

The iron oxide nanoparticles (IONPs) prepared by green synthesis method using Syzigium cumini leaf extract was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD confirmed the crystalline structure of green synthesized NPs measuring around 33 nm while SEM revealed its nearly spherical shape. Rhizobium species recovered from greengram nodules, identified by 16s rRNA gene sequencing as Rhizobium pusense produced 30% more exopolysaccharides (EPS) in basal medium treated with 1000 μg IONPs/ml. Compositional variation in EPS was observed by Fourier-transform infrared spectroscopy (FTIR). There was no reduction in rhizobial viability and no damage to bacterial membrane was observed under SEM and confocal laser scanning microscopy (CLSM), respectively. Effects of IONPs and R. pusense, used alone and in combination on the growth and development of greengram plants varied considerably. Plants grown with IONPs and R. pusence, used alone and in combination, showed a significant increase in seed germination rate, length and dry biomass of plant organs and seed components compared to controls. The IONPs in the presence of rhizobial strain further increased seed germination, plant growth, seed protein and pigments. Greater protein content (442 mg/g) was observed in seeds at 250 mg/kg of IONPs compared to control. Plants raised with mixture of IONPs plus R. pusense had maximum chlorophyll content (39.2 mg/g FW) while proline content decreased by 53% relative to controls. This study confirms that the green synthesis of IONPs from S. cumini leaf possess useful plant growth promoting effects and could be developed as a nano-biofertilizer for optimizing legume production.

Antifungal Effect of Nanoparticles against COVID-19 Linked Black Fungus: A Perspective on Biomedical Applications

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a highly transmissible and pathogenic coronavirus that has caused a 'coronavirus disease 2019' (COVID-19) pandemic in multiple waves, which threatens human health and public safety. During this pandemic, some patients with COVID-19 acquired secondary infections, such as mucormycosis, also known as black fungus disease. Mucormycosis is a serious, acute, and deadly fungal infection caused by Mucorales-related fungal species, and it spreads rapidly. Hence, prompt diagnosis and treatment are necessary to avoid high mortality and morbidity rates. Major risk factors for this disease include uncontrolled diabetes mellitus and immunosuppression that can also facilitate increases in mucormycosis infections. The extensive use of steroids to prevent the worsening of COVID-19 can lead to black fungus infection. Generally, antifungal agents dedicated to medical applications must be biocompatible, non-toxic, easily soluble, efficient, and hypoallergenic. They should also provide long-term protection against fungal growth. COVID-19-related black fungus infection causes a severe increase in fatalities. Therefore, there is a strong need for the development of novel and efficient antimicrobial agents. Recently, nanoparticle-containing products available in the market have been used as antimicrobial agents to prevent bacterial growth, but little is known about their efficacy with respect to preventing fungal growth, especially black fungus. The present review focuses on the effect of various types of metal nanoparticles, specifically those containing silver, zinc oxide, gold, copper, titanium, magnetic, iron, and carbon, on the growth of various types of fungi. We particularly focused on how these nanoparticles can impact the growth of black fungus. We also discussed black fungus co-infection in the context of the global COVID-19 outbreak, and management and guidelines to help control COVID-19-associated black fungus infection. Finally, this review aimed to elucidate the relationship between COVID-19 and mucormycosis.

Significance of Capping Agents of Colloidal Nanoparticles from the Perspective of Drug and Gene Delivery, Bioimaging, and Biosensing: An Insight

The over-growth and coagulation of nanoparticles is prevented using capping agents by the production of stearic effect that plays a pivotal role in stabilizing the interface. This strategy of coating the nanoparticles’ surface with capping agents is an emerging trend in assembling multipurpose nanoparticles that is beneficial for improving their physicochemical and biological behavior. The enhancement of reactivity and negligible toxicity is the outcome. In this review article, an attempt has been made to introduce the significance of different capping agents in the preparation of nanoparticles. Most importantly, we have highlighted the recent progress, existing roadblocks, and upcoming opportunities of using surface modified nanoparticles in nanomedicine from the drug and gene delivery, bioimaging, and biosensing perspectives.

Development of Molecularly Imprinted Polymers for Fenthion Detection in Food and Soil Samples

Modern agricultural production is greatly dependent on pesticide usage, which results in severe environmental pollution, health risks and degraded food quality and safety. Molecularly imprinted polymers are one of the most prominent approaches for the detection of pesticide residues in food and environmental samples. In this research, we prepared molecularly imprinted polymers for fenthion detection by using beta-cyclodextrin as a functional monomer and a room-temperature ionic liquid as a cosolvent. The characterization of the developed polymers was carried out. The polymers synthesized by using the room-temperature ionic liquid as the cosolvent had a good adsorption efficiency of 26.85 mg g⁻¹, with a short adsorption equilibrium time of 20 min, and the results fitted well with the Langmuir isotherm model and pseudo-second-order kinetic model. The polymer showed cross-selectivity for methyl-parathion, but it had a higher selectivity as compared to acetamiprid and abamectin. A recovery of 87.44–101.25% with a limit of detection of 0.04 mg L⁻¹ and a relative standard deviation of below 3% was achieved from soil, lettuce and grape samples, within the linear range of 0.02–3.0 mg L⁻¹, using high-performance liquid chromatography with an ultraviolet detector. Based on the results, we propose a new, convenient and practical analytical method for fenthion detection in real samples using improved imprinted polymers with room-temperature ionic liquid.

Diverse biotechnological applications of multifunctional titanium dioxide nanoparticles: An up-to-date review

Titanium dioxide (TiO₂) nanoparticles (NPs) are one of the topmost widely used metallic oxide nanoparticles. Whether present in naked form or doped with metals or polymers, TiO₂ NPs perform immensely important functions. However, the alteration in size and shape by doping results in improving the physical, chemical, and biological behaviour of TiO₂ NPs. Hence, the differential effects of various TiO₂ nanostructures including nanoflakes, nanoflowers, and nanotubes in various domains of biotechnology have been elucidated by researchers. Recently, the exponential growth of research activities regarding TiO₂ NPs has been observed owing to their chemical stability, low toxicity, and multifaceted properties. Because of their enormous abundance, plants, humans, and environment are inevitably exposed to TiO₂ NPs. These NPs play a significant role in improving agricultural attributes, removing environmental pollution, and upgrading the domain of nanomedicine. Therefore, the currently ongoing studies about the employment of TiO₂ NPs in enhancement of different aspects of agriculture, environment, and medicine have been extensively discussed in this review.

Exposure of cherry radish (Raphanus sativus L. var. Radculus Pers) to iron-based nanoparticles enhances its nutritional quality by trigging the essential elements

Iron (Fe) deficiency is a pervasive nutritional disorder, and producing vegetables enriched with Fe as a dietary source is imperative. Herein, Fe₃O₄, FeO(OH), α-Fe₂O₃, β-Fe₂O₃, γ-Fe₃O₄, and nZVI nanoparticles (NPs) were applied in soil as fertilizer to enhance the Fe nutrition in cherry radish. The highest enhancement of Fe content (58%) was observed in Fe₃O₄ treatment at 100 mg kg^-1, followed by FeO(OH) (49%), α-Fe₂O₃ (24%), nZVI (14%), β-Fe₂O₃ (13%) and γ-Fe₃O₄ (4%). The daily intake of Fe was 97-104% and 77-91% with Fe₃O₄ and FeO(OH) at 100-200 mg kg^-1, respectively. Moreover, the zinc, vitamin C and crude protein contents were also increased by 37, 48 and 67% under Fe₃O₄ treatment as compared to control. Fe₃O₄ at 100 mg kg^-1 also increased the essential amino acids (phenylalanine, leucine and isoleucine) contents by 11-14%. These data suggest that Fe₃O₄ and FeO(OH) NPs could be effective nanofertilizers to enhance Fe nutrition in plants.

Photocatalytic Activity of TiO2-Doped Fe, Ag, and Ni with N under Visible Light Irradiation

Doping with noble metal ions or doping with nitrogen has been attempted to prepare TiO2 that reacts even in visible light. In this study, TiO2 was doped with nitrogen and various metal ions instead of noble metals. The TiO2 photocatalysts doped with metal ions (Fe, Ag, Ni) and nitrogen were prepared by a sol-gel method. Their physicochemical properties were characterized and their photocatalytic activities were investigated under visible light irradiation. In TiO2 doped with metal ions and nitrogen, the light absorption region was extended to visible light. The photoluminescence intensity was much greater in N/Ni/TiO2 than in N/Ag/TiO2 and N/Fe/TiO2. The photolysis activities of N/Ni/TiO2 were the highest in formaldehyde decomposition and methylene blue decomposition. The sterilization efficiency of N/Ni/TiO2 was the highest in the evaluation test for the inhibition of the proliferation of Pseudomonas aeruginosa. The bandgap of N/Ni/TiO2 was 2.4 eV, which was significantly lower than that of anatase TiO2 (3.2 eV). The N/Ni/TiO2 had a much higher optical intensity than other metal ion-doped TiO2, so it was highly active under visible light irradiation.

Acesulfame K Photodegradation over Nitrogen-Doped TiO2

Acesulfame K is a zero-calorie alternative to sugar used worldwide. There is contradictory information on the toxicity of the compound, but its accumulation in the aquatic environment is undeniable. In this study, one-pot sol-gel synthesis was used to obtain nitrogen-doped TiO2 photocatalysts. Doping up to 6.29 wt % of nitrogen caused an increase in the surface area of the catalysts (48.55–58.23 m2∙g−1) and a reduction of the pHPZC value (5.72–5.05). Acesulfame K photodegradation was tested at the initial concentration of 20–100 ppm and the catalyst concentration at the level of 1 g∙L−1. Compared to the pure anatase, 4.83–6.29 wt % nitrogen-doped TiO2 showed an effective photodegradation of Acesulfame K. Ninety percent molecule removal was obtained after ~100 min, ~90 min, and ~80 min for initial concentrations of 20 ppm, 50 ppm, and 100 ppm, respectively. The increased activity of the catalysts is due to the modification of the TiO2 lattice structure and probably the limitation of the photogenerated electron/hole charge carrier recombination. It was shown that the electrostatic interactions between Acesulfame K and the catalyst surface play an important role in the photodegradation efficiency.

Chitosan capping of CuO nanoparticles: Facile chemical preparation, biological analysis, and applications in dentistry

This investigation is vital contribution to the healthcare system utilizing techniques of nanobiotechnology. It interestingly applies chitosan capped CuO nanoparticles in the field of medicine and restorative dentistry. The CuO nanoparticles and CuO-Chitosan nanoparticles are prepared by co-precipitation, and their characterization is performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray (EDX). The average crystallite size of these nanoparticles has been found to be in the dimensions of <40 nm and <35 nm, respectively. CuO-Chitosan nanoparticles show significant enhancement in in vitro antibacterial, antioxidant, cytotoxic, and antidiabetic activity as compared to CuO nanoparticles. In addition, the successful amalgamation of CuO nanoparticles and CuO-Chitosan nanoparticles into dentine bonding agents results in providing efficient remedy against secondary caries. CuO-Chitosan nanoparticles reinforced dental adhesive discs cause significant upsurge in reduction of Lactobacillus acidophillus and Streptococcus mutans. Also, the augmentation of mechanical properties, water sorption and solubility plus slow and sustained release profile and slight variation of shear bond strength is attained. Taken together, the chemically synthesized CuO nanoparticles and CuO-Chitosan nanoparticles have proven to be promising candidates having enormous potential to be utilized in drug delivery and nanotheranostics.

Perspectives on plasma-assisted synthesis of N-doped nanoparticles as nanopesticides for pest control in crops

Green plasma-based technology production of N-doped NPs for a new agri-tech revolution in pest control.