Using Carbomer-Based Hydrogels for Control the Release Rate of Diclofenac Sodium: Preparation and In Vitro Evaluation

Polymer microsphere inks for semi-solid extrusion 3D printing at ambient conditions

Extrusion-based 3D printing methods have great potential for manufacturing of personalized polymer-based drug-releasing systems. However, traditional melt-based extrusion techniques are often unsuitable for processing thermally labile molecules. Consequently, methods that utilize the extrusion of semi-solid inks under mild conditions are frequently employed. The rheological properties of the semi-solid inks have a substantial impact on the 3D printability, making it necessary to evaluate and tailor these properties. Here, we report a novel semi-solid extrusion 3D printing method based on utilization of a Carbopol gel matrix containing various concentrations of polymeric microspheres. We also demonstrate the use of a solvent vapor-based post-processing method for enhancing the mechanical strength of the printed objects. As our approach enables room-temperature processing of polymers typically used in the pharmaceutical industry, it may also facilitate the broader application of 3D printing and microsphere technologies in preparation of personalized medicine.

Antibacterial properties enhancement tropical fruit waste biopolymer hydrogel loaded Nephelium Lappaceum leaf extract for sanitizing applications

Current alcohol-based sanitizers present safety concerns and are not suitable for all applications. To address the issue, biopolymer hydrogels offer a safer, sustainable alternative due to biocompatibility, biodegradability, and customizable properties. In present study, carboxymethyl cellulose (CMC) was prepared from Durian fruit rind, a tropical fruit byproduct rich in polysaccharides and combined with the synthetic polymer Carbopol to form a hydrogel with homogenization technique. Rambutan (Nephelium lappaceum) leaf extract (RLE) as an antibacterial agent was analyzed for functional, morphological, antibacterial, and structural properties. Phytochemical analysis of RLE confirmed the presence of antibacterial compounds, while Minimum Inhibitory Concentrations (MIC) were 33.3 μg/mL for Escherichia coli and 28.5 μg/mL for Staphylococcus aureus. Additionally, Scanning Electron Microscopy showed significant disruptions in bacterial cell walls. Hydrogel incorporated RLE was produced with improved properties confirmed through viscosity, FT-IR, Disc-diffusion assay and spread plate method analysis. In general, Rambutan leaf extract significantly improves the antibacterial properties of biopolymer-based hydrogels, hence offering a promising, eco-friendly alternative to alcohol-based sanitizers.

Development of pH-responsive Hydrogel from Copolymers of Artemisia vulgaris Seed Mucilage, Mucin, and poly(methacrylate) for Controlled Delivery of Acyclovir Sodium

To cope with the constraints of conventional drug delivery systems, site-specific drug delivery systems are the major focus of researchers. The present research developed water-swellable, pH-responsive methacrylic acid-based hydrogel scaffolds of Artemisia vulgaris seed mucilage with mucin and loaded with acyclovir sodium as a model drug. The developed hydrogel discs are evaluated for diverse parameters. Drug loading efficiency in all formulations ranges from 63% to 75%. The hydrogels exhibited pH-dependent swelling, displaying optimum swelling in a phosphate buffer (pH 7.4), and insignificant swelling in an acidic buffer (pH 1.2), in addition, they responded well to electrolyte concentrations. The sol-gel fraction is estimated ranging from 60 to 95%. Dissolution studies unveiled sustained drug release for 24 h in a phosphate buffer of pH 7.4, exhibiting zero-order release kinetics. Moreover, FTIR spectra confirmed the drug-excipient compatibility. SEM photomicrographs revealed a rough and porous surface of hydrogel discs with several pores and channels. The PXRD diffractograms exposed the amorphous nature of the polymeric blends. The findings of acute toxicity studies proved the developed hydrogel network is biocompatible. Therefore, these outcomes connote the newly created network as a smart delivery system, able to dispatch acyclovir sodium into the intestinal segment for a prolonged period.

A xanthan gum and carbomer-codispersed divalent manganese ion-loaded tannic acid nanoparticle adjuvanted inactivated pseudorabies virus vaccine induces balanced humoral and cellular immune responses

Adjuvants including aluminum adjuvant (Alum) and oil-water emulsion have been widely used in inactivated pseudorabies virus (PRV) vaccines to improve their performance, however, they are not sufficient to protect from PRV infection because of the weak immune response and poor Th1-type immune response. Divalent manganese ion (Mn2+) has been reported to increase the cellular immune response significantly. In this work, a xanthan gum and carbomer-dispersed Mn2+-loaded tannic acid-polyethylene glycol (TPMnXC) nanoparticle colloid is developed and used as an adjuvant to improve the performance of the inactivated PRV vaccine. The good in vitro and in vivo biocompatibility of the developed TPMnXC colloid has been confirmed by the cell viability assay, erythrocyte hemolysis, blood routine analysis, and histological analysis of mouse organs and injection site. The TPMnXC-adjuvanted inactivated PRV vaccine (TPMnXC@PRV) significantly promotes higher and more balanced immune responses indicating with an increased specific total IgG antibody and IgG2a/IgG1 ratio, efficient splenocytes proliferation, and elevated Th1- and Th2-type cytokine secretion than those of control groups. Wild PRV challenge experiment is performed using mice as a model animal, achieving a protection rate of up to 86.67 %, which is much higher than those observed from the commercial Alum. This work not only demonstrates the high potentiality of TPMnXC in practical applications but also provides a new way to develop the Mn2+-loaded nanoadjuvant for veterinary vaccines.

Multidimensional opioid abuse deterrence using a nanoparticle-polymer hybrid formulation

Misuse of prescription opioid drugs is the leading cause of the opioid crisis and overdose-related death. Abuse deterrent formulations (ADFs) have been developed to discourage attempts to tamper with the formulation and alter the ingestion methods. However, abusers develop complex extraction strategies to circumvent the ADF technologies. For comprehensive deterrence of drug abuse, we develop tannic acid nanoparticles (NPs) that protect encapsulated opioids from solvent extraction and thermal challenge (crisping), complementing the existing formulation strategy to deter injection abuse. Here, we develop a hybrid ADF tablet (NP-Tab), consisting of iron-crosslinked tannic acid NPs encapsulating thebaine (model opioid compound), xanthan gum, and chitosan (gel-forming polymers), and evaluate its performance in common abuse conditions. NP-Tab tampered by crushing and suspended in aqueous solvents forms an instantaneous gel, which is difficult to pull or push through a 21-gauge needle. NPs insulate the drug from organic solvents, deterring solvent extraction. NPs also promote thermal destruction of the drug to make crisping less rewarding. However, NP-Tab releases thebaine in the simulated gastric fluid without delay, suggesting that its analgesic effect may be unaffected if consumed orally as prescribed. These results demonstrate that NP-Tab can provide comprehensive drug abuse deterrence, resisting aqueous/organic solvent extraction, injection, and crisping, while retaining its therapeutic effect upon regular usage.

Formulation and In Vitro Assessment of Polymeric pH-Responsive Nanogels of Chitosan for Sustained Delivery of Madecassoside

Madecassoside, a triterpenoid saponin compound mainly isolated from the gotu kola herb (Centella asiatica), shows an extensive range of biological activities, including antiapoptotic, antioxidant, anti-inflammatory, moisturizing, neuroprotective, and wound healing effects. It has been highly used in the management of eczema, skin wounds, and other diseases. Due to poor oral bioavailability, membrane permeability, and intestinal absorption, the clinical application of the madecassoside is limited. Hence, a drug carrier system is needed that not only sustains the release of the madecassoside but also overcomes the drawbacks associated with its administration. Therefore, the authors prepared novel pH-responsive chitosan-based nanogels for the sustained release of madecassoside. Free radical polymerization technique was used for cross-linking of polymer chitosan and monomer methacrylic acid in the presence of cross-linker N',N'-methylene bis(acrylamide). The decrease in polymer crystallinity after polymerization and development of nanogels was demonstrated by XRD and FTIR analysis. The effects of nanogel contents on polymer volume, sol-gel analysis, swelling, drug loading, and release were investigated. Results indicated that high swelling and maximum release of the drug occurred at pH 7.4 compared to pH 1.2 and 4.6, indicating the excellent pH-sensitive nature of the engineered nanogels. High swelling and drug release were perceived with the integration of a high quantity of chitosan, while a decline was observed with the high integration of N',N'-methylene bis(acrylamide) and methacrylic acid contents. The same effects of nanogel contents were shown for drug loading too. Sol fraction was reduced, while gel fraction was enhanced by increasing the chitosan load, N',N'-methylene bis(acrylamide), and methacrylic acid. The Korsmeyer-Peppas model of kinetics was trailed by all nanogel formulations with non-Fickian diffusion. The results demonstrated that prepared nanogels can be employed for sustained release of the madecassoside.

Pharmaceutical Formulations Containing Graphene and 5-Fluorouracil for Light-Emitting Diode-Based Photochemotherapy of Skin Cancer

Nonmelanoma skin cancer (NMSC) is the most common cancer worldwide, among which 80% is basal cell carcinoma (BCC). Current therapies' low efficacy, side effects, and high recurrence highlight the need for alternative treatments. In this work, a partially reduced nanographene oxide (p-rGOn) developed in our laboratory was used. It has been achieved through a controlled reduction of nanographene oxide via UV-C irradiation that yields small nanometric particles (below 200 nm) that preserve the original water stability while acquiring high light-to-heat conversion efficiency. The latter is explained by a loss of carbon-oxygen single bonds (C-O) and the re-establishment of sp2 carbon bonds. p-rGOn was incorporated into a Carbopol hydrogel together with the anticancer drug 5-fluorouracil (5-FU) to evaluate a possible combined PTT and chemotherapeutic effect. Carbopol/p-rGOn/5-FU hydrogels were considered noncytotoxic toward normal skin cells (HFF-1). However, when A-431 skin cancer cells were exposed to NIR irradiation for 30 min in the presence of Carbopol/p-rGOn/5-FU hydrogels, almost complete eradication was achieved after 72 h, with a 90% reduction in cell number and 80% cell death of the remaining cells after a single treatment. NIR irradiation was performed with a light-emitting diode (LED) system, developed in our laboratory, which allows adjustment of applied light doses to achieve a safe and selective treatment, instead of the standard laser systems that are associated with damages in the healthy tissues in the tumor surroundings. Those are the first graphene-based materials containing pharmaceutical formulations developed for BCC phototherapy.

Rheological insights on Carboxymethyl cellulose hydrogels

Hydrogels are copiously studied for tissue engineering, drug delivery, and bone regeneration owing to their water content, mechanical strength, and elastic behaviour. The preparation of stable and mechanically strengthened hydrogels without using toxic crosslinkers and expensive approaches is immensely challenging. In this study, we prepared Carboxymethyl cellulose based hydrogels with different polymer concentration via a less expensive physical crosslinking approach without using any toxic crosslinkers and evaluated their mechanical strength. In this hydrogel system, the carbopol concentration was fixed at 1 wt/v% and the Carboxymethyl cellulose concentration was varied between 1 and 5 wt/v%. In this hydrogel system, Carbopol serves as the crosslinker to bridge Carboxymethyl cellulose polymer through hydrogen bonds. Rheological analysis was employed in assessing the mechanical properties of the prepared hydrogel, in particular, the viscoelastic behaviour of the hydrogels. The viscoelastic nature and mechanical strength of the hydrogels increased with an increase in the Carboxymethyl cellulose polymer concentration. Further, our results suggested that gels with Carboxymethyl cellulose concentration between 3 wt/v % and 4 wt/v % with yield stresses of 58.83 Pa and 81.47 Pa, respectively, are potential candidates for use in transdermal drug delivery. The prepared hydrogels possessed high thermal stability and retained their gel network structure even at 50 °C. These findings are beneficial for biomedical applications in transdermal drug delivery and tissue engineering owing to the biocompatibility, stability, and mechanical strength of the prepared hydrogels.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Exploring the Drug-Loading and Release Ability of FucoPol Hydrogel Membranes

The polysaccharide FucoPol has recently been shown to yield hydrogel membranes (HMs) characterized by good mechanical properties, biocompatibility, and anti-inflammatory activity that render them promising biomaterials for use in the biomedical field. Subsequently to such findings, envisaging their development into novel delivery systems for topical applications, in this study, FucoPol HMs prepared by crosslinking the biopolymer with iron cations were loaded with caffeine or diclofenac sodium as model drugs. Two loading methods, namely diffusion and mixing, were applied to evaluate the FucoPol's HM drug-loading capacity and entrapment efficiency. The diffusion method led to a higher caffeine loading (101.9 ± 19.1 mg/g) in the HM1_DCAF membranes, while the mixing method resulted in a higher diclofenac sodium loading (82.3 ± 5.1 mg/g) in the HM1_DDS membranes. The HM1_DCAF membranes were characterized by increased mechanical and rheological parameters, such as their hardness (130.0 ± 5.3 kPa) and storage modulus (1014.9 ± 109.7 Pa), compared to the HM1_DDS membranes that exhibited lower values (7.3 ± 1.2 kPa and 19.8 ± 3.8 Pa, respectively), probably due to leaching occurring during the drug-loading process. The release profiles revealed a fast release of both APIs from the membranes loaded by diffusion, while a prolonged and sustained release was obtained from the membranes loaded by mixing. Moreover, for all API-loaded membranes, the release mechanism followed Fickian diffusion, with the release rate being essentially governed by the diffusion process. These findings, together with their previously shown biological properties, support the suitability of the developed FucoPol HMs to be used as platforms for the topical delivery of drugs.

Synthesis and Evaluation of Alginate-Based Nanogels as Sustained Drug Carriers for Caffeine

The objective of this study is to design a polymeric network of nanogels for sustained release of caffeine. Therefore, alginate-based nanogels were fabricated by a free-radical polymerization technique for the sustained delivery of caffeine. Polymer alginate was crosslinked with monomer 2-acrylamido-2-methylpropanesulfonic acid by crosslinker N',N'-methylene bisacrylamide. The prepared nanogels were subjected to sol-gel fraction, polymer volume fraction, swelling, drug loading, and drug release studies. A high gel fraction was seen with the increasing feed ratio of polymer, monomer, and crosslinker. Greater swelling and drug release were observed at pH 4.6 and 7.4 as compared to pH 1.2 due to the deprotonation and protonation of functional groups of alginate and 2-acrylamido-2-methylpropanesulfonic acid. An increase was observed in swelling, loading, and release of the drug with the incorporation of a high feed ratio of polymer and monomer, while a reduction was seen with the increase in crosslinker feed ratio. Similarly, an HET-CAM test was used to evaluate the safety of the prepared nanogels, which showed that the prepared nanogels have no toxic effect on the chorioallantoic membrane of fertilized chicken eggs. Similarly, different characterizations techniques such as FTIR, DSC, SEM, and particle size analysis were carried out to determine the development, thermal stability, surface morphology, and particle size of the synthesized nanogels, respectively. Thus, we can conclude that the prepared nanogels can be used as a suitable agent for the sustained release of caffeine.

Hydrophobic Drug Carrier from Polycaprolactone-b-Poly(Ethylene Glycol) Star-Shaped Polymers Hydrogel Blend as Potential for Wound Healing Application

Blending hydrogel with an amphiphilic polymer can increase the hydrophobic drug loading and entrapment efficiency of hydrogel-based formulations. In this study, a hydrogel formulation with star-shaped polycaprolactone-b-poly(ethylene glycol) (PCL-b-PEG) as the hydrophobic drug cargo is produced. The 4-arm and 6-arm star-shaped PCL are synthesized with different molecular weights (5000, 10,000, 15,000 g/mol) via ROP and MPEG as the hydrophilic segment is attached via the Steglich esterification. FTIR and ¹H-NMR analysis showed the presence of all functional groups for homopolymers and copolymers. M_n for all synthesized polymers is close to the theoretical value while GPC spectra showed a monomodal peak with narrow molecular weight distribution (PDI:1.01-1.25). The thermal degradation temperature and crystalline melting point of synthesized polymers increase with the increase in molecular weight and number of arms. All formulations possess high drug loading and entrapment efficiency (>99%) and increase with increasing molecular weight, number of arms, and amount of polymer in the formulations. All formulations showed a sustained drug release pattern with no initial burst, which follows the Korsmeyer-Peppas kinetic model. The polymer hydrogel formulations showed antibacterial activity against E. coli and S. aureus. The hydrogel containing 4-arm PCL_15k-PEG is chosen as the best formulation due to its high drug release, good antimicrobial activity, and morphology.

Essential Oils Distilled from Colombian Aromatic Plants and Their Constituents as Penetration Enhancers for Transdermal Drug Delivery

The study aimed to determine the enhanced effects of essential oils (EOs) and plant-derived molecules (PDMs) as penetration enhancers (PEs) for transdermal drug delivery (TDD) of caffeine. A 1% w/w solution of eight EOs and seven PDMs was included in the 1% caffeine carbopol hydrogel. Franz diffusion cell experiments were performed using mice with full-thickness skin. At various times over 24 h, 300 μL of the receptor were withdrawn and replaced with fresh medium. Caffeine was analyzed spectrophotometrically at 272 nm. The skin irritation effects of the hydrogels applied once a day for 21 days were investigated in mice. The steady-state flux (J_SS) of the caffeine hydrogel was 30 ± 19.6 µg cm^-2 h^-1. An increase in caffeine J_SS was induced by Lippia origanoides > Turnera diffusa > eugenol > carvacrol > limonene, with values of 150 ± 14.1, 130 ± 47.6, 101 ± 21.7, 90 ± 18.4, and 86 ± 21.0 µg cm^-2 h^-1, respectively. The Kp of caffeine was 2.8 ± 0.26 cm h^-1, almost 2-4 times lower than that induced by Lippia origanoides > Turnera diffusa > limonene > eugenol > carvacrol, with Kp values of 11 ± 1.7, 8.8 ± 4.2, 6.8 ± 1.7, 6.3 ± 1.2, and 5.15 ± 1.0 cm h^-1, respectively. No irritating effects were observed. Lippia origanoides, Turnera diffusa, eugenol, carvacrol, and limonene improved caffeine's skin permeation. These compounds may be as effective as the PE in TDD systems.

Preparation, Characterization and Evaluation of Flavonolignan Silymarin Effervescent Floating Matrix Tablets for Enhanced Oral Bioavailability

The convenient and highly compliant route for the delivery of active pharmaceutical ingredients is the tablet. A versatile platform of tablets is available for the delivery of therapeutic agents to the gastrointestinal tract. This study aimed to prepare gastro retentive drug delivery floating tablets of silymarin to improve its oral bioavailability and solubility. Hydroxypropyl methylcellulose (HPMCK4M and HPMCK15), Carbopol 934p and sodium bicarbonate were used as a matrix, floating enhancer and gas generating agent, respectively. The prepared tablets were evaluated for physicochemical parameters such as hardness, weight variation, friability, floating properties (floating lag time, total floating time), drug content, stability study, in vitro drug release, in vivo floating behavior and in vivo pharmacokinetics. The drug–polymer interaction was studied by Differential Scanning Calorimetry (DSC) thermal analysis and Fourier transform infrared (FTIR). The floating lag time of the formulation was within the prescribed limit (<2 min). The formulation showed good matrix integrity and retarded the release of drug for >12 h. The dissolution can be described by zero-order kinetics (r2 = 0.979), with anomalous diffusion as the release mechanism (n = 0.65). An in vivo pharmacokinetic study showed that Cmax and AUC were increased by up to two times in comparison with the conventional dosage form. An in vivo imaging study showed that the tablet was present in the stomach for 12 h. It can be concluded from this study that the combined matrix system containing hydrophobic and hydrophilic polymers min imized the burst release of the drug from the tablet and achieved a drug release by zero-order kinetics, which is practically difficult with only a hydrophilic matrix. An in vivo pharmacokinetic study elaborated that the bioavailability and solubility of silymarin were improved with an increased mean residence time.

Status and Future Scope of Soft Nanoparticles-Based Hydrogel in Wound Healing

Wounds are alterations in skin integrity resulting from any type of trauma. The healing process is complex, involving inflammation and reactive oxygen species formation. Therapeutic approaches for the wound healing process are diverse, associating dressings and topical pharmacological agents with antiseptics, anti-inflammatory, and antibacterial actions. Effective treatment must maintain occlusion and moisture in the wound site, suitable capacity for the absorption of exudates, gas exchange, and the release of bioactives, thus stimulating healing. However, conventional treatments have some limitations regarding the technological properties of formulations, such as sensory characteristics, ease of application, residence time, and low active penetration in the skin. Particularly, the available treatments may have low efficacy, unsatisfactory hemostatic performance, prolonged duration, and adverse effects. In this sense, there is significant growth in research focusing on improving the treatment of wounds. Thus, soft nanoparticles-based hydrogels emerge as promising alternatives to accelerate the healing process due to their improved rheological characteristics, increased occlusion and bioadhesiveness, greater skin permeation, controlled drug release, and a more pleasant sensory aspect in comparison to conventional forms. Soft nanoparticles are based on organic material from a natural or synthetic source and include liposomes, micelles, nanoemulsions, and polymeric nanoparticles. This scoping review describes and discusses the main advantages of soft nanoparticle-based hydrogels in the wound healing process. Herein, a state-of-the-art is presented by addressing general aspects of the healing process, current status and limitations of non-encapsulated drug-based hydrogels, and hydrogels formed by different polymers containing soft nanostructures for wound healing. Collectively, the presence of soft nanoparticles improved the performance of natural and synthetic bioactive compounds in hydrogels employed for wound healing, demonstrating the scientific advances obtained so far.

Synthesis and Evaluation of Rutin–Hydroxypropyl β-Cyclodextrin Inclusion Complexes Embedded in Xanthan Gum-Based (HPMC-g-AMPS) Hydrogels for Oral Controlled Drug Delivery

Oxidants play a significant role in causing oxidative stress in the body, which contributes to the development of diseases. Rutin—a powerful antioxidant—may be useful in the prevention and treatment of various diseases by scavenging oxidants and reducing oxidative stress. However, low solubility and oral bioavailability have restricted its use. Due to the hydrophobic nature of rutin, it cannot be easily loaded inside hydrogels. Therefore, first rutin inclusion complexes (RIC) with hydroxypropyl-β-cyclodextrin (HP-βCD) were prepared to improve its solubility, followed by incorporation into xanthan gum-based (hydroxypropyl methylcellulose-grafted-2-acrylamido -2-methyl-1-propane sulfonic acid) hydrogels for controlled drug release in order to improve the bioavailability. Rutin inclusion complexes and hydrogels were validated by FTIR, XRD, SEM, TGA, and DSC. The highest swelling ratio and drug release occurred at pH 1.2 (28% swelling ratio and 70% drug release) versus pH 7.4 (22% swelling ratio, 65% drug release) after 48 h. Hydrogels showed high porosity (94%) and biodegradation (9% in 1 week in phosphate buffer saline). Moreover, in vitro antioxidative and antibacterial studies (Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli) confirmed the antioxidative and antibacterial potential of the developed hydrogels.

Improved transdermal delivery of valsartan using combinatorial approach of polymeric transdermal hydrogels and solid microneedles: an ex vivo proof of concept investigation

Valsartan (VAL) is used as a first-line agent to treat hypertension. However, VAL exhibits poor absorption and low bioavailability when administrated orally. To overcome these issues, VAL transdermal gel was developed in this study, where Carbopol was used as the gel matrices. Additionally, solid microneedles (Dermaroller^®) with various needle lengths were combined with transdermal gel to improve its permeation across the stratum corneum as a skin barrier. Developed formulations were further evaluated for various parameters, including pH, viscosity, spreadability, extrudability, gel strength, drug content, ex vivo permeation, in vitro release, occlusivity, and hemolysis. The results showed that all formulations exhibited desired physical characteristics without any potential to cause toxicity. Moreover, this approach showed that using microneedles could significantly enhance the permeation of VAL up to 3 folds compared to untreated skin. The use of microneedles 1.5 mm was found to be the optimum combination to improve VA permeation without affecting skin integrity. As much as 1.69 ± 0.004 mg of VAL permeated after 8 h. Finally, it could be concluded that this work had successfully developed a new approach for VALS drug delivery and could potentially show a significant impact on the treatment of hypertension. Further in vivo work should be considered.

Assessment of Binary Agarose-Carbopol Buccal Gels for Mucoadhesive Drug Delivery: Ex Vivo and In Vivo Characterization

Agarose (AG) is a naturally occurring biocompatible marine seaweed extract that is converted to hydrocolloid gel in hot water with notable gel strength. Currently, its mucoadhesion properties have not been fully explored. Therefore, the main aim of this study was to evaluate the mucoadhesive potential of AG binary dispersions in combination with Carbopol 934P (CP) as mucoadhesive gel preparations. The gels fabricated via homogenization were evaluated for ex vivo mucoadhesion, swelling index (SI), dissolution and stability studies. The mucoadhesive properties of AG were concentration dependent and it was improved by the addition of CP. Maximum mucoadhesive strength (MS) (27.03 g), mucoadhesive flow time (FT) (192.2 min), mucoadhesive time in volunteers (MT) (203.2 min) and SI (23.6% at 4 h) were observed with formulation F9. The mucoadhesive time investigated in volunteers (MT) was influenced by AG concentration and was greater than corresponding FT values. Formulations containing 0.3%, w/v AG (F3 and F9) were able to sustain the release (~99%) for both drugs till 3 h. The optimized formulation (F9) did not evoke any inflammation, irritation or pain in the buccal cavity of healthy volunteers and was also stable up to 6 months. Therefore, AG could be considered a natural and potential polymer with profound mucoadhesive properties to deliver drugs through the mucosal route.

In-vitro and in-vivo evaluation of biocompatible polymeric microgels for pH- driven delivery of Ketorolac tromethamine

The aim of the current study was to prepare glutamic acid crosslinked poly(itaconic acid/methacrylic acid) microgels for pH-responsive delivery of ketorolac tromethamine, using aqueous free radical polymerization technique. The polymerization of polymer with monomers was carried out by a crosslinking agent N', N'-methylene bisacrylamide in the presence of initiator ammonium persulfate. The prepared microgels were characterized for structure, surface morphology, thermal stability, and crystallinity. Similarly, studies such as sol-gel analysis, drug loading, and polymer volume fraction were performed for the fabricated microgels. The pH-sensitivity of the developed microgels was investigated at three different pH values i.e., pH 1.2, 4.6, and 7.4 by swelling and in-vitro drug release studies. Maximum swelling and drug release were found at pH 7.4 as compared to pH 1.2 and 4.6, which indicated the pH-sensitive nature of the prepared microgels. The toxicity of the prepared microgels was evaluated by cell line and HET-CAM test, which demonstrated no toxic effect of the prepared microgels. In-vivo study was carried out on rabbits and high plasma concentration was reported for the drug loaded microgels as compared to drug solution and commercial product Keten. Hence, the prepared microgel system could be employed as an excellent carrier for the controlled drug delivery system.

Vaccine adjuvants to engage the cross-presentation pathway

Adjuvants are indispensable components of vaccines for stimulating optimal immune responses to non-replicating, inactivated and subunit antigens. Eliciting balanced humoral and T cell-mediated immunity is paramount to defend against diseases caused by complex intracellular pathogens, such as tuberculosis, malaria, and AIDS. However, currently used vaccines elicit strong antibody responses, but poorly stimulate CD8 cytotoxic T lymphocyte (CTL) responses. To elicit potent CTL memory, vaccines need to engage the cross-presentation pathway, and this requirement has been a crucial bottleneck in the development of subunit vaccines that engender effective T cell immunity. In this review, we focus on recent insights into DC cross-presentation and the extent to which clinically relevant vaccine adjuvants, such as aluminum-based nanoparticles, water-in oil emulsion (MF59) adjuvants, saponin-based adjuvants, and Toll-like receptor (TLR) ligands modulate DC cross-presentation efficiency. Further, we discuss the feasibility of using carbomer-based adjuvants as next generation of adjuvant platforms to elicit balanced antibody- and T-cell based immunity. Understanding of the molecular mechanism of DC cross-presentation and the mode of action of adjuvants will pave the way for rational design of vaccines for infectious diseases and cancer that require balanced antibody- and T cell-based immunity.

Formulation of Lipid-Based Tableted Spray-Congealed Microparticles for Sustained Release of Vildagliptin: In Vitro and In Vivo Studies

Spray-congealing (SPC) technology was utilized to prepare lipid-based microparticles (MP) capable of sustaining the release of Vildagliptin (VG) for use as a once-daily treatment for type 2 diabetes mellitus. VG microparticles were prepared using Compritol® and Gelucire®50/13 as lipid carriers in the presence of various amounts of Carbomer 934 NF. The lipid carriers were heated to 10 °C above their melting points, and VG was dispersed in the lipid melt and sprayed through the heated two-fluid nozzle of the spray congealer to prepare the VG-loaded MP (VGMP). The microparticles produced were then compressed into tablets and characterized for their morphological and physicochemical characteristics, content analysis, in vitro dissolution, and in vivo bioavailability studies in mixed-breed dogs. The VGMP were spherical with a yield of 76% of the total amount. VG was found to be in its semicrystalline form, with a drug content of 11.11% per tablet and a percentage drug recovery reaching 98.8%. The in vitro dissolution studies showed that VG was released from the tableted particles in a sustained-release fashion for up to 24 h compared with the immediate-release marketed tablets from which VG was completely released within 30 min. The in vivo pharmacokinetics studies reported a Cmax, Tmax, T1/2, and MRT of 118 ng/mL, 3.4 h, 5.27 h, and 9.8 h, respectively, for the SPC formulations, showing a significant difference (p < 0.05)) from the pk parameters of the immediate-release marketed drug (147 ng/mL, 1 h, 2.16 h, and 2.8 h, respectively). The area under the peak (AUC) of both the reference and tested formulations was comparable to indicate similar bioavailabilities. The in vitro-in vivo correlation (IVIVC) studies using multiple level C correlations showed a linear correlation between in vivo pharmacokinetics and dissolution parameters. In conclusion, SPC was successfully utilized to prepare a once-daily sustained-release VG oral drug delivery system.

Electrospun Nanofiber and Cryogel of Polyvinyl Alcohol Transdermal Patch Containing Diclofenac Sodium: Preparation, Characterization and In Vitro Release Studies

Transdermal drug delivery systems (TDDS) have drawn more interest from pharmaceutical scientists because they could provide steady blood levels and prevent the first-pass metabolism over a longer period. Polyvinyl alcohol (PVA) has been widely used in this application due to its biocompatibility, non-toxicity, nanofiber and hydrogel-forming ability. Despite those benefits, their morphology would easily be destroyed by continuous water absorption and contribute to burst drug release due to its hydrophilicity. The aim of this study was to prepare the diclofenac sodium (DS)-medicated dual layer PVA patch using a combination of electrospinning and cryogelation (freeze-thaw) methods to improve the physicochemical properties and drug compatibility and investigate the release of the DS-medicated dual layer PVA patch. Morphological observations using scanning electron microscopy (SEM) verified the polymer-polymer interaction between both layers, whereas Fourier transform infrared (FTIR) spectroscopy has demonstrated the compatibility of DS in PVA matrix up to 2% w/v of PVA volume. The DS loads were found amorphously distributed efficaciously in PVA matrix as no visible spectra of DS-PVA interaction were detected. The DS-medicated dual layer PVA patch with a thicker nanofiber layer (3-milliliter running volume), three freeze-thaw cycles and 2% DS loading labeled as 2%DLB3C show the lowest swelling capacity (18.47%). The in vitro assessment using Franz diffusion cells showed that the 2%DLB3C indicates a better sustained release of DS, with 53.26% of the DS being released after 12 h. The 2%DLB3C owned a flux (Jss) of 0.256 mg/cm2/h and a permeability coefficient (Kp) value of 0.020 cm/h. Thus, the results demonstrate that DS-medicated dual layer PVA patches prepared via a combination of electrospinning and cryogelation are capable of releasing drugs for up to 24 h and can serve as a drug reservoir in the skin, thereby extending the pharmacologic effects of DS.

Influence of Stabilizer on the Development of Luteolin Nanosuspension for Cutaneous Delivery: An In Vitro and In Vivo Evaluation

Luteolin is a natural drug used as an antioxidant and anti-inflammatory, but unfortunately, it possesses low water solubility, which hinders its delivery via the skin. The main objective of this study was to prepare a luteolin-loaded nanosuspension by the antisolvent precipitation/sonication technique and study the effects of four stabilizers (two nonionic stabilizers, Pluronic F127 and Tween 80, and two polymeric stabilizers, HPMC and alginate) on the physicochemical properties of the prepared formulations. The selected formulations were incorporated into a gel base to evaluate their skin permeability and anti-inflammatory efficacy. The particle size was in the nanosize range (in the range from 468.1 ± 18.6 nm to 1024.8 ± 15.9 nm), while the zeta potential was negative and in the range from −41.7 ± 6.3 mV to −15.3 ± 1.9 mV. In particular, alginate-stabilized nanosuspensions showed the smallest particle size, the highest zeta potential value, and excellent stability due to the dual stabilizing effects (electrostatic and steric effects). The DSC results revealed a less crystalline structure of luteolin in lyophilized NS2 and NS12. Formulations stabilized by 1% Pluronic (NS2) and 2% alginate (NS12) were incorporated into a carbopol 940 gel base and showed good organoleptic character (homogenous with no evidenced phase separation or grittiness). In vitro dissolution studies showed that NS12 enhanced luteolin release rates, indicating the effect of particle size on the drug release pattern. On the other hand, NS2 showed enhanced skin permeability and anti-inflammatory effect in a carrageenan-induced paw edema model, revealing the surface activity role of the stabilizers. In conclusion, while alginate increased the nanosuspension stability by means of dual stabilizing effects, Pluronic F127 improved the skin delivery and pharmacodynamic efficacy of luteolin.

Synthesis, Characterization, In-Vitro and In-Vivo Evaluation of Ketorolac Tromethamine-Loaded Hydrogels of Glutamic Acid as Controlled Release Carrier

Glutamic acid-co-poly(acrylic acid) (GAcPAAc) hydrogels were prepared by the free radical polymerization technique using glutamic acid (GA) as a polymer, acrylic acid (AAc) as a monomer, ethylene glycol dimethylacrylate (EGDMA) as a cross-linker, and ammonium persulfate (APS) as an initiator. Increase in gel fraction was observed with the increasing concentration of glutamic acid, acrylic acid, and ethylene glycol dimethylacrylate. High percent porosity was indicated by developed hydrogels with the increase in the concentration of glutamic acid and acrylic acid, while a decrease was seen with the increasing concentration of EGDMA, respectively. Maximum swelling and drug release was exhibited at high pH 7.4 compared to low pH 1.2 by the newly synthesized hydrogels. Similarly, both swelling and drug release increased with the increasing concentration of glutamic acid and acrylic acid and decreased with the increase in ethylene glycol dimethylacrylate concentration. The drug release was considered as non-Fickian transport and partially controlled by viscoelastic relaxation of hydrogel. In-vivo study revealed that the AUC_0–∞ of fabricated hydrogels significantly increased compared to the drug solution and commercial product Keten. Hence, the results indicated that the developed hydrogels could be used as a suitable carrier for controlled drug delivery.

Formulation and In-Vitro Characterization of pH-Responsive Semi-Interpenetrating Polymer Network Hydrogels for Controlled Release of Ketorolac Tromethamine

Ketorolac tromethamine is a non-steroidal anti-inflammatory drug used in the management of severe pain. The half-life of Ketorolac tromethamine is within the range of 2.5–4 h. Hence, repeated doses of Ketorolac tromethamine are needed in a day to maintain the therapeutic level. However, taking several doses of Ketorolac tromethamine in a day generates certain complications, such as acute renal failure and gastrointestinal ulceration. Therefore, a polymeric-controlled drug delivery system is needed that could prolong the release of Ketorolac tromethamine. Therefore, in the current study, pH-responsive carbopol 934/sodium polystyrene sulfonate-co-poly(acrylic acid) (CP/SpScPAA) hydrogels were developed by the free radical polymerization technique for the controlled release of Ketorolac tromethamine. Monomer acrylic acid was crosslinked with the polymers carbopol 934 and sodium polystyrene sulfonate by the cross-linker N’,N’-methylene bisacrylamide. Various studies were conducted to evaluate and assess the various parameters of the fabricated hydrogels. The compatibility of the constituents used in the preparation of hydrogels was confirmed by FTIR analysis, whereas the thermal stability of the unreacted polymers and developed hydrogels was analyzed by TGA and DSC, respectively. A smooth and porous surface was indicated by SEM. The crystallinity of carbopol 934, sodium polystyrene sulfonate, and the prepared hydrogels was evaluated by PXRD, which revealed a reduction in the crystallinity of reactants for the developed hydrogels. The pH sensitivity of the polymeric hydrogel networks was confirmed by dynamic swelling and in vitro release studies with two different pH media i.e., pH 1.2 and 7.4, respectively. Maximum swelling was exhibited at pH 7.4 compared to pH 1.2 and, likewise, a greater percent drug release was perceived at pH 7.4. Conclusively, we can demonstrate that the developed pH-sensitive hydrogel network could be employed as a suitable carrier for the controlled delivery of Ketorolac tromethamine.

Synthesis and Characterization of Antibacterial Carbopol/ZnO Hybrid Nanoparticles Gel

This study recommends Carbopol/zinc oxide (ZnO) hybrid nanoparticles gel as an efficient antibacterial agent against different bacterial species. To this end, ZnO nanoparticles were synthesized using chemical precipitation derived from a zinc acetate solution with ammonium hydroxide as its precipitating agent under the effect of ultrasonic radiation. The synthesized ZnO nanoparticles were stabilized simultaneously in a freshly prepared Carbopol gel at a pH of 7. The chemical composition, phase identification, particle size and shape, surface charge, pore size distribution, and the BET surface area of the ZnO nanoparticles, as well as the Carbopol/ZnO hybrid Nanoparticles gel, were by XRD, SEM, TEM, AFM, DLS, Zeta potential and BET instruments. The results revealed that the synthesized ZnO nanoparticles were well-dispersed in the Carbopol gel network, and have a wurtzite-crystalline phase of spherical shape. Moreover, the Carbopol/ZnO hybrid nanoparticles gel exhibited a particle size distribution between ~9 and ~93 nm, and a surface area of 54.26 m2/g. The synthesized Carbopol/ZnO hybrid nanoparticles gel underwent an antibacterial sensitivity test against gram-negative K. pneumonia (ATCC 13883), Bacillus subtilis (ATCC 6633), and gram-positive Staphylococcus aureus (ATCC 6538) bacterial strains, and were compared with ampicillin as a reference antibiotic agent. The obtained results demonstrated that the synthesized Carbopol/ZnO hybrid nanoparticles gel exhibited a compatible bioactivity against the different strains of bacteria.

Emulgels Containing Propolis and Curcumin: The Effect of Type of Vegetable Oil, Poly(Acrylic Acid) and Bioactive Agent on Physicochemical Stability, Mechanical and Rheological Properties

Emulgels are obtained by the entrapment of an organic phase within a three-dimensional network built by hydrophilic molecules. Polymers based on cross-linked poly(acrylic acid) have been utilized as gel matrices, improving adhesiveness, rheological and mechanical performance. Propolis (PRP) produced by Apis mellifera L. bees displays a wide range of biological activities. Together with curcumin (CUR), they may show synergic anti-inflammatory, antioxidant and antimicrobial action on skin disorders. This work investigated the effect of vegetable oils (sweet almond, andiroba, and passion fruit) with regard to the physicochemical properties of emulgels composed of Carbopol 934P^®, Carbopol 974P^®, or polycarbophil aiming the CUR and PRP delivery. Physicochemical stability enabled the selection of systems containing passion fruit or andiroba oil. Mechanical and rheological characteristics provided rational comprehension of how vegetable oils and bioactive agents affect the structure of emulsion gels. All formulations exhibited high physiochemical stability and properties dependent on the polymer type, oil, and bioactive agent. Formulations displayed pseudoplastic, thixotropic and viscoelastic properties. Emulgels containing andiroba oil were the most stable systems. Carbopol 934P^® or polycarbophil presence resulted in formulations with improved smoothness and mechanical properties. Systems containing andiroba oil and one of these two polymers are promising for further investigations as topical delivery systems of CUR and/or PRP on the skin and mucous membranes.

Pre-Formulation Studies: Physicochemical Characteristics and In Vitro Release Kinetics of Insulin from Selected Hydrogels

Insulin loaded to the polymer network of hydrogels may affect the speed and the quality of wound healing in diabetic patients. The aim of our research was to develop a formulation of insulin that could be applied to the skin. We chose hydrogels commonly used for pharmaceutical compounding, which can provide a form of therapy available to every patient. We prepared different gel formulations using Carbopol^® Ultrez^TM 10, Carbopol^® Ultrez^TM 30, methyl cellulose, and glycerin ointment. The hormone concentration was 1 mg/g of the hydrogel. We assessed the influence of model hydrogels on the pharmaceutical availability of insulin in vitro, and we examined the rheological and the texture parameters of the prepared formulations. Based on spectroscopic methods, we evaluated the influence of model hydrogels on secondary and tertiary structures of insulin. The analysis of rheograms showed that hydrogels are typical of shear-thinning non-Newtonian thixotropic fluids. Insulin release from the formulations occurs in a prolonged manner, providing a longer duration of action of the hormone. The stability of insulin in hydrogels was confirmed. The presence of model hydrogel carriers affects the secondary and the tertiary structures of insulin. The obtained results indicate that hydrogels are promising carriers in the treatment of diabetic foot ulcers. The most effective treatment can be achieved with a methyl cellulose-based insulin preparation.

Fabrication and In Vitro Evaluation of pH-Sensitive Polymeric Hydrogels as Controlled Release Carriers

The purpose of the current investigation was to develop chondroitin sulfate/carbopol-co-poly(acrylic acid) (CS/CBP-co-PAA) hydrogels for controlled delivery of diclofenac sodium (DS). Different concentrations of polymers chondroitin sulfate (CS), carbopol 934 (CBP), and monomer acrylic acid (AA) were cross-linked by ethylene glycol dimethylacrylate (EGDMA) in the presence of ammonium peroxodisulfate (APS) (initiator). The fabricated hydrogels were characterized for further experiments. Characterizations such as Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), and Fourier transform infrared spectroscopy (FTIR) were conducted to understand the surface morphology, thermodynamic stability, crystallinity of the drug, ingredients, and developed hydrogels. The swelling and drug release studies were conducted at two different pH mediums (pH 1.2 and 7.4), and pH-dependent swelling and drug release was shown due to the presence of functional groups of both polymers and monomers; hence, greater swelling and drug release was observed at the higher pH (pH 7.4). The percent drug release of the developed system and commercially available product cataflam was compared and high controlled release of the drug from the developed system was observed at both low and high pH. The mechanism of drug release from the hydrogels followed Korsmeyer-Peppas model. Conclusively, the current research work demonstrated that the prepared hydrogel could be considered as a suitable candidate for controlled delivery of diclofenac sodium.

Preparation and In Vitro Evaluation of Aspartic/Alginic Acid Based Semi-Interpenetrating Network Hydrogels for Controlled Release of Ibuprofen

Different combinations of polymers, aspartic acid (ASP), alginic acid (AL), and monomer acrylic acid (AA) were crosslinked in the presence of an initiator ammonium peroxodisulfate (APS) and cross-linker ethylene glycol dimethacrylate (EGDMA) to develop aspartic acid/alginic acid-co-poly(acrylic acid) (ASP/ALPAA) (semi-interpenetrating polymer network (SIPN)) hydrogels by the free radical polymerization technique for the controlled delivery of ibuprofen (IBP). Various studies such as dynamic swelling studies, drug loading, in vitro drug release and sol-gel analysis were carried out for the hydrogels. Higher swelling was observed at higher pH 7.4 as compared to lower pH 1.2, due to the presence of carboxylic groups of polymers and the monomer. Hence, pH-dependent swelling was exhibited by the developed hydrogels which led to a pH-dependent drug release and vice versa. The structural properties of the hydrogels were assessed by FTIR, PXRD, TGA, DSC, and SEM which confirmed the fabrication and stability of the developed structure. FTIR analysis revealed the reaction of both polymers with the monomer during the polymerization process and confirmed the overlapping of the monomer on the backbone of the both polymers. The disappearance of high intense crystalline peaks and the encapsulation of the drug by the hydrogel network was confirmed by PXRD. TGA and DSC showed that the developed hydrogels were thermally more stable than their basic ingredients. Similarly, the surface morphology of the hydrogels was analyzed by SEM and showed a smooth surface with few pores. Conclusively, ASP/ALPAA hydrogels have the potential to deliver IBP for a long period of time in a controlled way.

Preparation, Characterization, Swelling Potential, and In-Vitro Evaluation of Sodium Poly(Styrene Sulfonate)-Based Hydrogels for Controlled Delivery of Ketorolac Tromethamine

The objective of the current study work was to fabricate sodium poly(styrene sulfonate-co-poly acrylic acid) (SPSPAA) hydrogels by using a free radical co-polymerization method for controlled delivery of ketorolac tromethamine (KT). Polymer (sodium poly(styrene sulfonate) (SPS) polymerized with monomer acrylic acid (AA) in the presence of initiator ammonium peroxodisulfate (APS) and cross-linker N',N'-Methylene bisacrylamide (MBA). Different combinations of polymer, cross-linker and monomer, were employed for development of polymeric hydrogels. Various studies such as sol-gel, drug loading, dynamic swelling, and drug release studies were carried out to know the sol and gel portion of SPSPAA, swelling behavior of hydrogels at different pH media (1.2 and 7.4), quantification of drug loaded by fabricated hydrogels, and amount release of KT at pH 1.2 and 7.4. Higher dynamic swelling was found at pH 7.4 compared to pH 1.2, and as a result, greater percent release of drug was perceived at pH 7.4. Thermal stability, crystallinity, confirmation of functional groups and development of a new polymeric system, and surface morphology were evaluated via Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Powder X-ray Diffraction (PXRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) respectively. The results showed that the present work could be used as a potential candidate for controlled delivery of KT.