Polyamide-Laccase Nanofiber Membrane for Degradation of Endocrine-Disrupting Bisphenol A, 17α-ethinylestradiol, and Triclosan

Advanced applications in enzyme-induced electrospun nanofibers

Electrospun nanofibers, renowned for their high specific surface area, robust mechanical properties, and versatile chemical functionalities, offer a promising platform for enzyme immobilization. Over the past decade, significant strides have been made in developing enzyme-induced electrospun nanofibers (EIEN). This review systematically summarizes the advanced applications of EIEN which are fabricated using both non-specific immobilization methods including interfacial adsorption (direct adsorption, cross-linking, and covalent binding) and encapsulation, and specific immobilization techniques (coordination and affinity immobilization). Future research should prioritize optimizing immobilization techniques to achieve a balance between enzyme activity, stability, and cost-effectiveness, thereby facilitating the industrialization of EIEN. We elucidate the rationale behind various immobilization methods and their applications, such as wastewater treatment, biosensors, and biomedicine. We aim to provide guidelines for developing suitable EIEN immobilization techniques tailored to specific future applications.

Ozonation degradation of wastewater using rotational hydrodynamic cavitation reactor with a conical rotor

Water pollution caused by an abusive discharge of dye-containing wastewater leads to serious ecological risks. Conventional wastewater treatment methods have shortcomings of incomplete degradation, long-time treatment and secondary pollution. For the first time, a rotational hydrodynamic cavitation reactor (RHCR) equipped with a conical rotor has been designed to enhance the ozonation process for effective degradation of pollutants. The effects of rotational speed, discharge voltage, gas flow rate, liquid flow rate and initial pH on methylene blue (MB) degradation were deeply investigated. The optimised conditions were initial pH = 9, rotational speed = 1800 rpm, discharge voltage = 9.3 kV, gas flow rate = 60 mL/min and liquid flow rate = 80 mL/min. With the integration of ozonation and cavitation in RHCR, the MB degradation efficiency reached 95.2%, which was 15.6% higher than that of the individual ozonation method. The degradation process was proven to track the first-order kinetic model, with the reaction rate and synergy index were 0.232 min-1 and 1.78, respectively. Through the quenching experiments, it can be confirmed that the contribution proportion of hydroxyl radical during degradation was increased by 8.7% due to the enhancement of cavitation. A required energy consumption of 74.7 kWh/order/m3 and a total expense of 8.7 $/m3 were calculated. The energy consumption of the RHCR was approximately 80% lower than that of the recently reported degradation system combining ozonation and cavitation, with total expense reduced by 52%. The findings of this work provide a new water treatment method and offered theoretical references for the design of RHCR.

Advances and applications of crosslinked electrospun biomacromolecular nanofibers

Electrospinning is a technology for fabricating ultrafine fibers from natural or synthetic polymers that have novel or enhanced functional properties. These fibers have found applications in a diverse range of fields, including the food, medicine, cosmetics, agriculture, and chemical industries. However, the tendency for electrospun nanofibers to dissociate when exposed to certain environmental conditions limits many of their practical applications. The structural integrity and functional attributes of these nanofibers can be improved using physical and/or chemical crosslinking methods. This review article discusses the formation of polymeric nanofibers using electrospinning and then describes how different crosslinking methods can be used to enhance their mechanical, thermal, and biological attributes. Methods for optimizing the crosslinking reactions are discussed, including proper selection of crosslinker type and reaction conditions. Then, food, medical, and separation applications of crosslinked electrospun fibers are assessed, including in bone and skin tissue engineering, wound healing, drug delivery, air filtration, water filtration, oil removal, food packaging, food preservation, and bioactive delivery. Finally, areas where future research are needed are highlighted, as well as possible future applications of crosslinked nanofibers.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

The Mechanisms of Plastic Food-Packaging Monomers' Migration into Food Matrix and the Implications on Human Health

The development of packaging technology has become a crucial part of the food industry in today's modern societies, which are characterized by technological advancements, industrialization, densely populated cities, and scientific advancements that have increased food production over the past 50 years despite the lack of agricultural land. Various types of food-packaging materials are utilized, with plastic being the most versatile. However, there are certain concerns with regards to the usage of plastic packaging because of unreacted monomers' potential migration from the polymer packaging to the food. The magnitude of monomer migration depends on numerous aspects, including the monomer chemistry, type of plastic packaging, physical-chemical parameters such as the temperature and pH, and food chemistry. The major concern for the presence of packaging monomers in food is that some monomers are endocrine-disrupting compounds (EDCs) with a capability to interfere with the functioning of vital hormonal systems in the human body. For this reason, different countries have resolved to enforce guidelines and regulations for packaging monomers in food. Additionally, many countries have introduced migration testing procedures and safe limits for packaging monomer migration into food. However, to date, several research studies have reported levels of monomer migration above the set migration limits due to leaching from the food-packaging materials into the food. This raises concerns regarding possible health effects on consumers. This paper provides a critical review on plastic food-contact materials' monomer migration, including that from biodegradable plastic packaging, the monomer migration mechanisms, the monomer migration chemistry, the key factors that affect the migration process, and the associated potential EDC human health risks linked to monomers' presence in food. The aim is to contribute to the existing knowledge and understanding of plastic food-packaging monomer migration.

Catalytic roles, immobilization and management of recalcitrant environmental pollutants by laccases: Significance in sustainable green chemistry

We are facing a high risk of exposure to emerging contaminants and increasing environmental pollution with the concomitant growth of industries. Persistence of these pollutants is a major concern to the ecosystem. Laccases, also known as "green catalysts" are multi-copper oxidases which offers an eco-friendly solution for the degradation of these hazardous pollutants to less or non-toxic compounds. Although various other biological methods exist for the treatment of pollutants, the fact that laccases catalyze the oxidation of broad range of substrates in the presence of molecular oxygen without any additional cofactor and releases water as the by-product makes them exceptional. They have a good possibility of utilization in various industries, especially for the purpose of bioremediation. Besides this, they have also been used in medical/health care, food industry, bio-bleaching, wine stabilization, organic synthesis and biosensors. This review covers the catalytic behaviour of laccases, their immobilization strategies, potential applications in bioremediation of recalcitrant environmental pollutants and their engineering. It provides a comprehensive summary of most factors to consider while working with laccases in an industrial setting. It compares the benefits and drawbacks of the current techniques. Immobilization and mediators, two of the most significant aspects in working with laccases, have been meticulously discussed.

Industrial applications of immobilized nano-biocatalysts

Immobilized enzyme-based catalytic constructs could greatly improve various industrial processes due to their extraordinary catalytic activity and reaction specificity. In recent decades, nano-enzymes, defined as enzyme immobilized on nanomaterials, gained popularity for the enzymes' improved stability, reusability, and ease of separation from the biocatalytic process. Thus, enzymes can be strategically incorporated into nanostructured materials to engineer nano-enzymes, such as nanoporous particles, nanofibers, nanoflowers, nanogels, nanomembranes, metal-organic frameworks, multi-walled or single-walled carbon nanotubes, and nanoparticles with tuned shape and size. Surface-area-to-volume ratio, pore-volume, chemical compositions, electrical charge or conductivity of nanomaterials, protein charge, hydrophobicity, and amino acid composition on protein surface play fundamental roles in the nano-enzyme preparation and catalytic properties. With proper understanding, the optimization of the above-mentioned factors will lead to favorable micro-environments for biocatalysts of industrial relevance. Thus, the application of nano-enzymes promise to further strengthen the advances in catalysis, biotransformation, biosensing, and biomarker discovery. Herein, this review article spotlights recent progress in nano-enzyme development and their possible implementation in different areas, including biomedicine, biosensors, bioremediation of industrial pollutants, biofuel production, textile, leather, detergent, food industries and antifouling.

Biocatalytic membranes for combating the challenges of membrane fouling and micropollutants in water purification: A review

Over the last few years, the list of water contaminants has grown tremendously due to many anthropogenic activities. Various conventional technologies are available for water and wastewater treatment. However, micropollutants of emerging concern (MEC) are posing a great threat due to their activity at trace concentration and poor removal efficiency by the conventional treatment processes. Advanced technology like membrane technology can remove MEC to some extent. However, issues like the different chemical properties of MEC, selectivity, and fouling of membranes can affect the removal efficiency. Moreover, the concentrate from the membrane filtration may need further treatment. Enzymatic degradation of pollutants and foulants is one of the green approaches for removing various contaminants from the water as well as mitigating membrane fouling. Biocatalytic membranes (BCMs), in which enzymes are immobilized on membranes, combines the advantages of membrane separation and enzymatic degradation. This review article discussed various commonly used enzymes in BCMs for removing MEC and fouling. The majorly used enzymes were oxidoreductases and hydrolases for removing MEC, antifouling, and self-cleaning ability. The various BCM synthesis processes based on entrapment, crosslinking, and binding have been summarized, along with the effects of the addition of the nanoparticles on the performances of the BCMs. The scale-up, commercial viability, challenges, and future direction for improving BCMs have been discussed and shown bright possibilities for these new generation membranes.

Optimization and efficacy studies of Laccase immobilized on Zein-Polyvinyl pyrrolidone nano fibrous membrane in decolorization of Acid Red 1

Azo dyes are widely used in textile industries. A significant portion of these recalcitrant dyes are being discharged to the natural waters. Due to their low biodegradability they pose serious pollution problems if untreated. In this work, decolourization studies of Acid Red 1 (AR1) by laccase enzyme immobilized onto zein-polyvinyl pyrrolidone (PVP) composite nanofiber is done. The nanofibers were characterized by scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) analysis. pH and temperature profiles of immobilized enzyme were found to be broader than its free counterpart. The K_m value was found to be 0.243 mM for free laccase and 0.958 mM for immobilized laccase. Similarly, V_max for the free enzyme was 3.572 U/mg compared to 2.48 U/mg of immobilized laccase. The relative activity of immobilized laccase was 64.91% after storage for 30 days at room temperature while it was 28.64% for free laccase. The temperature and pH for AR 1 decolorization were optimized and was found to be 60 °C and 5, respectively. Also, decolorization percentage was found to be 91.67% for immobilized laccase and 72.03% of free laccase in the presence of natural mediators like vanillin. From phytotoxicity studies it was found that the germination rate, shoot and root length was increased compared to untreated dye. Therefore, zein-PVP nanofiber immobilized laccase could be an ideal candidate for the textile dye decolorization.

Laccase and horseradish peroxidase for green treatment of phenolic micropollutants in real drinking water and wastewater

Biologically active micropollutants that contain diverse phenolic/aromatic structures are regularly present in wastewater effluents and are even found in drinking water. Advanced green technologies utilizing immobilized laccase and/or peroxidase, which target these micropollutants directly, may provide a reasonable alternative to standard treatments. Nevertheless, the use of these enzymes is associated with several issues that may prevent their application, such as the low activity of laccase at neutral and basic pH or the necessity of hydrogen peroxide addition as a co-substrate for peroxidases. In this study, the activity of laccase from Trametes versicolor and horseradish peroxidase was evaluated across a range of commonly used substrates (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), syringaldazine, and guaiacol). Moreover, conditions for their optimal performance were explored along with an assessment of whether these conditions accurately reflect the effectivity of both enzymes in the degradation of a mixture of bisphenol A, 17α-ethinylestradiol, triclosan, and diclofenac in tap drinking water and secondary wastewater effluent. Laccase and horseradish peroxidase showed optimal activity at strongly acidic pH if ABTS was used as a substrate. Correspondingly, the activities of both enzymes detected using ABTS in real waters were significantly enhanced by adding approximately 2.5% (v/v) of McIlvaine's buffer. Degradation of a mixture of micropollutants in wastewater with 2.5% McIlvaine's buffer (pH 7) resulted in a substantial decrease in estrogenic activity. Low degradation efficiency of micropollutants by laccase was observed in pure McIlvaine's buffer of pH 3 and 7, compared with efficient degradation in tap water of pH 7.5 without buffer. This study clearly shows that enzyme activity needs to be evaluated on micropollutants in real waters as the assessment of optimal conditions based on commonly used substrates in pure buffer or deionized water can be misleading.

White rot fungi can be a promising tool for removal of bisphenol A, bisphenol S, and nonylphenol from wastewater

Endocrine-disrupting chemicals (EDC) are a wide group of chemicals that interfere with the endocrine system. Their similarity to natural steroid hormones makes them able to attach to hormone receptors, thereby causing unfavorable health effects. Among EDC, bisphenol A (BPA), bisphenol S (BPS), and nonylphenol (NP) seem to be particularly harmful. As the industry is experiencing rapid expansion, BPA, BPS, and NP are being produced in growing amounts, generating considerable environmental pollution. White rot fungi (WRF) are an economical, ecologically friendly, and socially acceptable way to remove EDC contamination from ecosystems. WRF secrete extracellular ligninolytic enzymes such as laccase, manganese peroxidase, lignin peroxidase, and versatile peroxidase, involved in lignin deterioration. Owing to the broad substrate specificity of these enzymes, they are able to remove numerous xenobiotics, including EDC. Therefore, WRF seem to be a promising tool in the abovementioned EDC elimination during wastewater treatment processes. Here, we review WRF application for this EDC removal from wastewater and indicate several strengths and limitations of such methods.

Persistence, ecological risks, and oxidoreductases-assisted biocatalytic removal of triclosan from the aquatic environment

Triclosan (TCS) has been immensely employed in health care products and consumer items, as an active agent with fungicidal and bactericidal potentialities, such as soaps, sanitizers, tubes of toothpaste, deodorants, skin creams, and so on for over last five decades. The ultimate excretory route of TCS ends in our water matrices, thus has been frequently detected with ecological and human-health related matters and hazards. Bioactive residues of TCS reach into the key atmosphere compartment through numerous routes, such as (1) scarce or ineffective elimination or degradation throughout the treatment practices, (2) abandoned landfill leachates, (3) leakage from the discarded TCS-containing materials, and so on. Such persistence and occurrence of TCS or its degraded but bioactive residues have growing attentions. Its complete removal and/or effective prevention are still challenging tasks for safeguarding the environment. Owing to the highly effective catalytic and stability potential, enzyme-based bio-degradation approaches are considered an evocative substitute for TCS mitigation from environmental matrices. As compared to enzymes in their pristine form, immobilized enzymes, with unique catalytic, stability, selectivity, and reusability profile, are of supreme and strategic interest in environmental biotechnology. Herein, an effort has been made to signify the novel bio-catalytic and bio-degradation potentialities of various oxidoreductases, including laccases, and peroxidases including soybean peroxidase, versatile manganese peroxidase, and horseradish peroxidase with suitable examples. Following a brief introduction, the focus is given to the presence of TCS in the key atmosphere compartments. Potential sources, acquaintance, and hazardous influence of TCS are also discussed with recent and relevant examples. The second half shows the TCS removal/degradation potentialities of soluble enzyme-based catalytic systems and immobilized-enzyme-based catalytic systems. Finally, the concluding remarks, along with possible future directions are given in this significant research arena.

Biodegradation of bisphenol A by the immobilized laccase on some synthesized and modified forms of zeolite Y

Bisphenol A (BPA) is an environmental pollutant with adverse effects on different ecosystems. In this study, immobilized laccase enzymes onto inorganic supports were used to remove BPA. Laccase was successfully immobilized on sodium zeolite Y (NaY) and its modified desilicated (DSY) and dealuminated (DAY) forms. NaY-based supports were instrumentally characterized. The immobilized laccase on NaY (laccase@NaY), desilicated (laccase@DSY), and dealuminated (laccase@DAY) forms showed significant improvement on immobilization yield (IY%) and efficiency (IE%). Laccase@DSY and laccase@NaY showed IY% = 73.18 ± 3.33 % and 46.23 ± 1.81 % and IE% = 94.50 ± 1.86 %, and 74.39 ± 1.41 %, respectively, whereas IY% and IE% for laccase@DAY were achieved as 81.12 ± 1.32 % and 98.56 ± 2.93 %, respectively. The supports also increased the enzyme characteristics such as pH-temperature range, catalytic stability, and reusability. K_m values were 0.73 ± 0.05, 0.26 ± 0.09, 0.31 ± 0.5, and 1.01 ± 0.03 mM for laccase@NaY, laccase@DAY, laccase@DSY, and the free enzyme, respectively. The enzyme demonstrated higher biodegradation ability of bisphenol A upon immobilization on the supports compared to that of the soluble enzyme. A bio-removal yield of 86.7 % was obtained considering three parameters including amount of laccase@DAY (8 U mg^-1), concentration of BPA (0.5 mM), and treatment time (1 h) based on response surface methodology (RSM). Biodegradation metabolites (49 ± 5.8 %) and unconverted BPA (14 ± 5.2 %) were analyzed by gas chromatography-mass spectrometry.

Wastewater Treatment by Novel Polyamide/Polyethylenimine Nanofibers with Immobilized Laccase

Endocrine-disrupting chemicals are highly resistant organic compounds, commonly occurring in the aquatic environment, that can interfere with the endocrine system of animals and humans, causing serious chronic diseases. In recent decades, enzymes from oxidoreductases have been studied for their potential to degrade these compounds effectively. In order to use such enzymes repeatedly, it is necessary to ensure their insolubility in water, a method termed enzyme immobilization. We developed novel polyamide/polyethylenimine (PA/PEI) nanofibers as a promising support material for the immobilization of various biomolecules. Our nanofibers are highly suitable due to a unique combination of mechanical endurance provided by polyamide 6 and their affinity toward biomolecules, ensured by numerous PEI amino groups. Enzyme laccase was successfully immobilized onto PA/PEI nanofibers using a simple and fast method, providing exceptional activity and stability of the attached enzyme. We then tested the degradation ability of the PA/PEI-laccase samples on a highly concentrated mixture of endocrine-disrupting chemicals in real wastewater with adjusted pH. The results indicate that the samples were a suitable material for wastewater treatment by degrading a highly concentrated mixture of bisphenol A, 17α-ethinylestradiol, triclosan, and diclofenac, in real wastewater effluent.

TiO2 Sol-Gel Coated PAN/O-MMT Multi-Functional Composite Nanofibrous Membrane Used as the Support for Laccase Immobilization: Synergistic Effect between the Membrane Support and Enzyme for Dye Degradation

Removal of a triphenylmethane dye (crystal violet, CV) by a simultaneous enzymatic-photocatalytic-adsorption treatment was investigated in this work. A desirable synergistic effect on dye treatment was achieved by decorating laccase (Lac) onto the surface of TiO₂ sol-gel coated polyacrylonitrile/organically modified montmorillonite (PAN/O-MMT) nanofibers prepared by electrospinning. The assembly of Lac on the surface of PAN/O-MMT/TiO₂ nanofibers was confirmed by confocal laser scanning microscope (CLSM). In comparison with free Lac, the immobilized Lac showed better pH, temperature and operational stabilities, reaching highest relative activity at an optimum pH of 3 and optimum temperature of 50 °C. Therefore, the immobilized Lac displayed a higher degradation efficiency of CV at an initial dye concentration of 100 mg/L, an optimum pH of 4.5 and temperature at 60 °C. Under UV illumination, the CV removal efficiency was further improved by ~20%. These results demonstrated that the Lac-immobilized PAN/O-MMT/TiO₂ composite nanofibers with a combined effect between the immobilized enzyme and the polymeric support have potential for industrial dye degradation.