A Review on the Partial and Complete Dissolution and Fractionation of Wood and Lignocelluloses Using Imidazolium Ionic Liquids

Sustainable green extraction of anthocyanins and carotenoids using deep eutectic solvents (DES): A review of recent developments

Recently, deep eutectic solvents (DES) have been extensively researched as a more biocompatible and efficient alternative to conventional solvents for extracting pigments from natural resources. The efficiency of DES extraction for the anthocyanin and carotenoid can be enhanced by microwave-assisted extraction (MAE) and/or ultrasound-assisted extraction (UAE) techniques. Apart from the extraction efficiency, the toxicity and recovery of the pigments and their bioavailability are crucial for potential applications. A plethora of studies have explored the extraction efficiency, toxicity, and recovery of pigments from various natural plant-based matrices using DES. Nevertheless, a detailed review of the deep eutectic solvent extraction of natural pigments has not been reported to date. Additionally, the toxicity, safety, and bioavailability of the extracted pigments, and their potential applications are not thoroughly documented. Therefore, this review is designed to understand the aforementioned concepts in using DES for anthocyanin and carotenoid extraction.

Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.

Oxygen-Containing Quaternary Phosphonium Salts (oxy-QPSs): Synthesis, Properties, and Cellulose Dissolution

In the present study, the synthesis of oxygen-containing quaternary phosphonium salts (oxy-QPSs) was described. Within this work, structure-property relationships of oxy-QPSs were estimated by systematic analysis of physical-chemical properties. The influence of the oxygen-containing substituent was examined by comparing the properties of oxy-QPSs in homology series as well as with phosphonium analog-included alkyl side chains. The crystal structure analysis showed that the oxygen introduction influences the conformation of the side chain of the oxy-QPS. It was found that oxy-QPSs, using an aprotic co-solvent, dimethylsulfoxide (DMSO), can dissolve microcrystalline cellulose. The cellulose dissolution in oxy-QPSs appeared to be dependent on the functional group in the cation and anion nature. For the selected conditions, dissolution of up to 5 wt% of cellulose was observed. The antimicrobial activity of oxy-QPSs under study was expected to be low. The biocompatibility of oxy-QPSs with fermentative microbes was tested on non-pathogenic Saccharomyces cerevisiae, Lactobacillus plantarum, and Bacillus subtilis. This reliably allows one to safely address the combined biomass destruction and enzyme hydrolysis processes in one pot.

The key role of pretreatment for the one-step and multi-step conversions of European lignocellulosic materials into furan compounds

Nowadays, an increased interest from the chemical industry towards the furanic compounds production, renewable molecules alternatives to fossil molecules, which can be transformed into a wide range of chemicals and biopolymers. These molecules are produced following hexose and pentose dehydration. In this context, lignocellulosic biomass, owing to its richness in carbohydrates, notably cellulose and hemicellulose, can be the starting material for monosaccharide supply to be converted into bio-based products. Nevertheless, processing biomass is essential to overcome the recalcitrance of biomass, cellulose crystallinity, and lignin crosslinked structure. The previous reports describe only the furanic compound production from monosaccharides, without considering the starting raw material from which they would be extracted, and without paying attention to raw material pretreatment for the furan production pathway, nor the mass balance of the whole process. Taking account of these shortcomings, this review focuses, firstly, on the conversion potential of different European abundant lignocellulosic matrices into 5-hydroxymethyl furfural and 2-furfural based on their chemical composition. The second line of discussion is focused on the many technological approaches reported so far for the conversion of feedstocks into furan intermediates for polymer technology but highlighting those adopting the minimum possible steps and with the lowest possible environmental impact. The focus of this review is to providing an updated discussion of the important issues relevant to bringing chemically furan derivatives into a market context within a green European context.

Lignocellulosic residues from bioethanol production: a novel source of biopolymers for laccase immobilization

The full utilization of the main components in the lignocellulosic biomass is the major goal from a biorefinery point of view, giving not only environmental benefits but also making the process economically viable. In this sense the solid residue obtained in bioethanol production after steam explosion pretreatment, enzymatic hydrolysis, and fermentation of the lignocellulosic biomass, was studied for further valorization. Two different residues were analyzed, one generated by the production of cellulosic ethanol from an energy crop such as switchgrass (Panicum virgatum) and the other, from wood (Eucalyptus globulus). The chemical composition of these by-products showed that they were mainly composed of lignin with a total content range from 70 to 83% (w/w) and small amounts of cellulose and hemicellulose. The present work was focused on devising a new alternative for processing these materials, based on the ability of the ionic liquids (IL) to dissolve lignocellulosic biomass. The resulting mixture of biopolymers and IL constituted the raw material for developing new insoluble biocatalysts. Active hydrogels based on fungal laccase from Dichostereum sordulentum 1488 were attained. A multifactorial analysis of the main variables involved in the immobilization process enabled a more direct approach to improving hydrogel-bound activity. These hydrogels achieved a 97% reduction in the concentration of the estrogen ethinylestradiol, an emerging contaminant of particular concern due to its endocrine activity. The novel biocatalysts based on fungal laccase entrapped on a matrix made from a by-product of second-generation bioethanol production presents great potential for performing heterogeneous catalysis offering extra value to the ethanol biorefinery.

Pretreatment and composting technology of agricultural organic waste for sustainable agricultural development

With the continuous development of agriculture, Agricultural organic waste (AOW) has become the most abundant renewable energy on earth, and it is a hot spot of research in recent years to realize the recycling of AOW to achieve sustainable development of agricultural production. However, lignocellulose, which is difficult to degrade in AOW, greenhouse gas emissions, and pile pathogenic fungi and insect eggs are the biggest obstacles to its return to land use. In response to the above problems researchers promote organic waste recycling by pretreating AOW, controlling composting conditions and adding other substances to achieve green return of AOW to the field and promote the development of agricultural production. This review summarizes the ways of organic waste treatment, factors affecting composting and problems in composting by researchers in recent years, with a view to providing research ideas for future related studies.

Advances of Imidazolium Ionic Liquids for the Extraction of Phytochemicals from Plants

In this review, we present the research from 2013 to 2022 about the character of ionic liquids, the categories of phytochemicals, and the reasons for selecting imidazolium ionic liquids for phytochemical extraction. Then we introduce the structural formulae of the imidazolium ionic liquids commonly used in the extraction of phytochemicals, the methods used to prepare imidazolium ionic liquids, and a comprehensive introduction of how imidazolium ionic liquids are applied to extract phytochemicals from plants. Importantly, we discuss the strategies for studying the extraction mechanisms of imidazolium ionic liquids to extract phytochemicals, and the recovery methods regarding imidazolium ionic liquids and their recyclability are analyzed. Then the toxicity in imidazolium ionic liquids is pointed out. Finally, the challenges and prospects of extracting phytochemicals by imidazolium ionic liquids are summarized, and they are expected to provide some references for researchers.

Novel Electrically Conductive Cellulose Nanocrystals with a Core-Shell Nanostructure Towards Biodegradable Electronics

Electronic waste (e-waste) is the fastest growing waste stream and its negative impact on the environment and human health is major because of the toxicity and non-biodegradability of its constituents. For their biodegradability and nontoxicity, bio-based materials have been proposed as potential material candidates in the field of electronics. Among these, cellulose nanocrystals (CNCs) have many interesting properties including biodegradability, high mechanical strength, and possibility to functionalize. In terms of electrical properties, CNCs are electrically insulated, limiting their potential in electronics. This work aims to build up a poly(o-toluidine)-like shell around the CNCs to render them conductive. For this goal, the surface of the CNCs was carbamated using 2,4-toluene diisocyanate through the para-isocyanates and the ortho-isocyanates were later hydrolyzed to amine groups using HCl-acidified dimethylsulfoxide. The resultant o-toluidine-like molecules on the CNC surface were then polymerized using ammonium persulfate to form an electrically conductive shell around each CNC. The resultant CNCs were then characterized for their chemical, morphological, and electrical properties. Fourier-transform infrared analysis of the CNCs at each stage confirmed the expected chemical changes upon carbamation, hydrolysis, and polymerization and X-ray diffraction confirmed the permanence of the native crystalline structure of the CNCs. The atomic force microscopy images showed that the obtained CNCs were on average slightly thicker than the original ones, possibly due to the growth of the poly(o-toluidine) shell around them. Finally, using the four-point method, the obtained CNCs were electrically conductive with a conductivity of 0.46 S/cm. Such novel electrically conductive CNCs should have great potential in a wide range of applications including electronics, sensing, and medicine.

Collaboration of two-star nanomaterials: The applications of nanocellulose-based metal organic frameworks composites

Nanocellulose, as the star nanomaterial in carbohydrate polymers, has excellent mechanical properties, biodegradability, and easy chemical modification. However, further practical applications of nanocellulose are limited by their inadequate functionalization. Metal-organic frameworks (MOFs), as the star nanomaterial in functional polymers, have a large surface area, high porosity, and adjustable structure. The collaboration of nanocellulose and MOFs is a desirable strategy to make composites especially interesting for multifunctional and multi-field applications. What sparks will be produced by the collaboration of two-star nanomaterials? In this review article, we highlight an up-to-date overview of nanocellulose-based MOFs composites. The sewage treatment, gas separation, energy storage, and biomedical applications are mainly summarized. Finally, the challenges and research trends of nanocellulose-based MOFs composites are prospected. We hope this review may provide a valuable reference for the development and applications of carbohydrate polymer composites soon.

Challenges in Using Ionic Liquids for Cellulosic Ethanol Production

The growing need to expand the use of renewable energy sources in a sustainable manner, providing greater energy supply security and reducing the environmental impacts associated with fossil fuels, finds in the agricultural by-product bioethanol an economically viable alternative with significant expansion potential. In this regard, a dramatic boost in the efficiency of processes already in place is required, reducing costs, industrial waste, and our carbon footprint. Biofuels are one of the most promising alternatives to massively produce energy sustainably in a short-term period. Lignocellulosic biomass (LCB) is highly recalcitrant, and an effective pretreatment strategy should also minimize carbohydrate degradation by diminishing enzyme inhibitors and other products that are toxic to fermenting microorganisms. Ionic liquids (ILs) have been playing an important role in achieving cleaner processes as a result of their excellent physicochemical properties and outstanding performance in the dissolution and fractionation of lignocellulose. This review provides an analysis of recent advances in the production process of biofuels from LCB using ILs as pretreatment and highlighting techniques for optimizing and reducing process costs that should help to develop robust LCB conversion processes.

Effect of Low Concentrations of Lithium Chloride Additive on Cellulose-Rich Ultrafiltration Membrane Performance

Various water treatment processes make extensive use of porous polymeric membranes. A key objective in membrane fabrication is to improve membrane selectivity without sacrificing other properties such as permeability. Herein, LiCl (0-2 wt.%) was utilised as a preforming agent in fabricating biomass-derived cellulosic membranes. The fabricated membranes were characterised by dope solution viscosity, surface and cross-sectional morphology, pure water flux, relative molecular mass cut-off (MWCO, 35 kDa), membrane chemistry, and hydrophilicity. The results demonstrated that at the optimum LiCl concentration (0.4 wt.%), there is an interplay of thermodynamic instability and kinetic effects during membrane formation, wherein the membrane morphology and hydrophilicity can be preferably altered and thus lead to the formation of the membrane with better rejection at no detriment to its permeability.

Experience of Using DLS to Study the Particle Sizes of Active Component in the Catalysts Based on the Oxide and Non-Oxide Supports

The present study reports the use of the dynamic light scattering (DLS) method to analyze metal nanoparticle sizes in supported catalysts (as a model system for different metal-oxide nanocomposites, ceramics, etc.). The selective dissolution of matrices has been used to transform solids to sols for DLS analysis. DLS/STS (from solid to sol) technique was tested on a wide number of different sets of supported metal catalysts (Pt, Pd, Ru metals and Al2O3, SiO2, TiO2, C3N4, carbon and polymers as supports). The transmission electron microscopy and X-ray diffraction (TEM/XRD) results for the initial supported catalysts and the DLS results for the sols prepared from them showed good agreement with each other. Moreover, it has been shown that this approach can identify the minor contamination of catalysts by large particles or aggregates which are difficult to detect by TEM/XRD.

Recent Update on anaerobic digestion of paddy straw for biogas production: Advancement, limitation and recommendations

At present, development and production of advanced green energy sources are highly demanded, and this may offer a clean and sustainable environment to our modern society. In this reference, biogas is emerging as a promising green energy source and seems to have high potential to replace fossil-fuel based energy sources in the coming future. Further, lignocellulosic biomass (LCB) based biogas production technology has been found to be highly promising owing to several advantages associated therewith. Rich inorganic content, renewable nature, huge availability and low-cost are the key beneficial factors of LCB-based feedstock l to produce biogas. Among the varieties of LCB, paddy straw is one of the most demanding feedstocks and is highly rich in organic compounds that are imperative to producing biogas. Nevertheless, it is noticed that paddy straw as a waste material is usually disposed-off by direct burning, whereas it exhibits low natural digestibility due to the presence of high lignin and silica content which causes severe environmental pollution. On the other hand, paddy straw can be a potential feedstock to produce biogas through anaerobic digestion. Therefore, based on the current ongoing research studies worldwide, this review evaluates the advancements made in the AD process. Meanwhile, existing limitations and future recommendations to improve the yield and productivity of the biogas using paddy straw have been discussed. The emphasis has also been given to various operational parameters developments, related shortcomings, and strategies to improve biogas production at pilot scale.

Thermophilic biohydrogen production strategy using agro industrial wastes: Current update, challenges, and sustainable solutions

Continuously increasing wastes management issues and the high demand of fuels to fulfill the current societal requirements is not satisfactory. In addition, severe environmental pollution caused by generated wastes and the massive consumption of fossil fuels are the main causes of global warming. In this scenario, production of hydrogen from organic wastes is a potential and one of the most feasible alternatives to resolve these issues. However, sensitivity of H₂ production at higher temperature and lack of potential substrates are the main issues which are strongly associated with such kinds of biofuels. Therefore, the present review is targeted towards the evaluation and enhancement of thermophilic biohydrogen production using organic, cellulosic wastes as promising bioresources. This review discusses about the current status, development in the area of thermophilic biohydrogen production wherein organic wastes as key substrate are being employed. The combinations of suitable organic and cellulose rich substrates, thermo-tolerant microbes, high enzymes stability may support to enhance the biohydrogen production, significantly. Further, various factors which may significantly contribute to enhance biohydrogen production have been discussed thoroughly in reference to the thermophilic biohydrogen production technology. Additionally, existing obstacles such as unfavorable thermophilic biohydrogen pathways, inefficiency of thermophilic microbiomes, genetic modifications, enzymes stability have been discussed in context to the possible limitations of thermophilic biohydrogen production strategy. Structural and functional microbiome analysis, fermentation pathway modifications via genetic engineering and the application of nanotechnology to enhance the thermophilic biohydrogen production have been discussed as the future prospective.

Inhibitor formation and detoxification during lignocellulose biorefinery: A review

For lignocellulose biorefinery, pretreatment is needed to maximize the cellulose accessibility, frequently generating excess inhibitory substances to decline the efficiency of the subsequent fermentation processes. This mini-review updates the current research efforts to detoxify the adverse impacts of generated inhibitors on the performance of biomass biorefinery. The lignocellulose pretreatment processes are first reviewed. The generation of inhibitors, furans, furfural, phenols, formic acid, and acetic acid, from the lignocellulose, with their action mechanisms, are listed. Then the detoxification processes are reviewed, from which the biological detoxification processes are noted as promising and worth further study. The challenges and prospects for applying biological detoxification in lignocellulose biorefinery are outlined. Integrated studies considering the entire biorefinery should be performed on a case-by-case basis.

New Insights into the Thermal Stability of 1-Butyl-3-methylimidazolium-Based Ionic Liquids

One of the most promising applications of ionic liquids (ILs) with 1-butyl-3-methylimidazolium (bmim) cation is based on their unique ability to dissolve and fractionate lignocellulosic biomass, allowing for the development of green biorefining technologies. A complete dissolution of lignocellulose requires prolonged treatment at elevated temperatures, which can cause the partial degradation of ILs. In the present study, a combination of various analytical techniques (GC-MS, HPLC-HRMS, 2D-NMR, synchronous thermal analysis) was used for the comprehensive characterization of bmim acetate, chloride, and methyl sulfate degradation products formed at 150 °C during 6- and 24-h thermal treatment. A number of volatile and non-volatile products, including monomeric and dimeric alkyl substituted imidazoles, alcohols, alkyl amines, methyl and butyl acetates, and N-alkylamides, was identified. By thermal lability, ILs can be arranged in the following sequence, coinciding with the decrease in basicity of the anion: [bmim]OAc > [bmim]Cl > [bmim]MeSO4. The accumulation of thermal degradation products in ILs, in turn, affects their physico-chemical properties and thermal stability, and leads to a decrease in the decomposition temperature, a change in the shape of the thermogravimetric curves, and the formation of carbon residue during pyrolysis.

Enhanced oxidative depolymerization of lignin in cooperative imidazolium-based ionic liquid binary mixtures

The aerobic oxidation of lignin model 2-phenoxyacetophenone (2-PAP) in cooperative ionic liquid mixtures (CoILs) with 1-ethyl-3-methylimidazolium acetate ([C₂C₁im]OAc) and 1-benzyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([B_ZC₁im]NTf₂) was investigated. Complete degradation of 2-PAP was achieved with [C₂C₁im]OAc/[B_ZC₁im]NTf₂ molar ratio (R_IL) of 1/1 and 1/2 at 100 °C for 2 h. The conversion and product yields from CoILs were higher than those in pure ILs, indicating the cooperative effects of [C₂C₁im]OAc/[B_ZC₁im]NTf₂ on cleaving aryl-ether bonds. [C₂C₁im]OAc promoted the catalytic cleavage of aryl-ether bonds and solvation, and [B_ZC₁im]NTf₂ induced the formation of alkyl radicals and enhanced the product selectivity. Accordingly, the highest conversion of alkali lignin (79.8%) was obtained with R_IL of 5/1 at 100 °C for 2 h, and phenol monomers (306 mg/g) were selectively produced. The CoILs exhibited good catalytic capacities for oxidative depolymerization of lignin, which strongly depends on the changes in intermolecular interactions and structural organization with varying R_IL.

Strategies of Recovery and Organic Recycling Used in Textile Waste Management

Post-consumer bio-based textile wastes are any type of garment or household article made from manufactured bio-based textiles that the owner no longer needs and decides to discard. According to the hierarchy of waste management, post-consumer textile waste should be organically recycled. However, there is still a problem with the implementation of selective collection of textile waste followed by sorting, which would prepare the waste for organic recycling. A technically achievable strategy for sorted textile waste materials consisting of only one type of fiber material, multi-material textiles are a problem for recycling purposes. Waste textiles are composed of different materials, including natural as well as synthetic non-cellulosic fibers, making bioprocessing difficult. Various strategies for recovery of valuable polymers or monomers from textile waste, including concentrated and dilute acid hydrolysis, ionic liquids as well as enzymatic hydrolysis, have been discussed. One possible process for fiber recycling is fiber recovery. Fiber reclamation is extraction of fibers from textile waste and their reuse. To ensure that organic recycling is effective and that the degradation products of textile waste do not limit the quality and quantity of organic recycling products, bio-based textile waste should be biodegradable and compostable. Although waste textiles comprising a synthetic polymers fractions are considered a threat to the environment. However, their biodegradable part has great potential for production of biological products (e.g., ethanol and biogas, enzyme synthesis). A bio-based textile waste management system should promote the development and application of novel recycling techniques, such as further development of biochemical recycling processes and the textile waste should be preceded by recovery of non-biodegradable polymers to avoid contaminating the bioproducts with nano and microplastics.

A polymeric Brønsted acid ionic liquid mediated liquefaction of municipal solid waste

The rapid industrialization and population explosion continuously generate massive amounts of municipal waste. Several conventional processes are in practice for the treatment of municipal waste, but the requirement of stringent operating conditions, incomplete conversion, longer processing time and emission of toxic gases, etc., are the major associated barriers. Thus, there is an urgent requirement for a sustainable, environmentally feasible process that can process waste into energy and fuel products. In the present manuscript, polyethylenimine functionalized polymeric Bronsted acid ionic liquid (PolyE-IL) catalysts have been explored for the Catalytic Thermo Liquefaction (CTL) of organic biodegradable municipal solid waste (MSW). A series of PolyE-IL catalysts with variable counter ions were examined for CTL of MSW. Of all the tested PolyE-IL catalysts, the integration of [PEI]⁺[HSO₄]^- gave excellent MSW conversion (>85%) and yield (>80%) of liquefied products (CTL-Oil) under non-stringent reaction conditions and without any formation char and gases. The influence of reaction conditions such as catalyst concentration, reaction temperature, time, slurry concentration, and type of feedstock of conversion and yield are studied. The column adsorption and membrane separation process was integrated to facilitate the catalyst and CTL-Oil separation. A series of commercially available hydrophobic resins were tested to separate catalyst and CTL-Oil. ICT005 showed the highest adsorption efficiency of all tested resins with 35.46 mg/mL of binding capacity and K_d of 0.02159. The physicochemical properties of CTL-Oil were studied in detail by using various analytical tools, which exhibited that CTL-Oil comprises a mixture of small and large molecular weight organic compounds and has a calorific value of 4000 kcal/kg; hence it could be used for further energy and fuel applications. Thus, the reported CTL process can be beneficial to resolve both environmental and fossil fuel dependency issues simultaneously by converting MSW into CTL-Oil.

Improvement of Enzymatic Saccharification and Ethanol Production from Rice Straw Using Recycled Ionic Liquid: The Effect of Anti-Solvent Mixture

One of the major concerns for utilizing ionic liquid on an industrial scale is the cost involved in the production. Despite its proven pretreatment efficiency, expenses involved in its usage hinder its utilization. A better way to tackle this limitation could be overcome by studying the recyclability of ionic liquid. The current study has applied the Box–Behnken design (BBD) to optimize the pretreatment condition of rice straw through the usage of 1-ethyl-3-methylimidazolium acetate (EMIM-Ac) as an ionic liquid. The model predicted the operation condition with 5% solid loading at 128.4 °C for 71.83 min as an optimum pretreatment condition. Under the optimized pretreatment condition, the necessity of the best anti-solvent was evaluated among water, acetone methanol, and their combinations. The study revealed that pure methanol is the suitable choice of anti-solvent, enhancing the highest sugar yield. Recyclability of EMIM-Ac coupled with anti-solvent was conducted up to five recycles following the predicted pretreatment condition. Fermentation studies evaluated the efficacy of recycled EMIM-Ac for ethanol production with 89% more ethanol production than the untreated rice straw even after five recycles. This study demonstrates the potential of recycled ionic liquid in ethanol production, thereby reducing the production cost at the industrial level.

Recent Advances in Biomass Pretreatment Technologies for Biohydrogen Production

Hydrogen is an economical source of clean energy that has been utilized by industry for decades. In recent years, demand for hydrogen has risen significantly. Hydrogen sources include water electrolysis, hydrocarbon steam reforming, and fossil fuels, which emit hazardous greenhouse gases and therefore have a negative impact on global warming. The increasing worldwide population has created much pressure on natural fuels, with a growing gap between demand for renewable energy and its insufficient supply. As a result, the environment has suffered from alarming increases in pollution levels. Biohydrogen is a sustainable energy form and a preferable substitute for fossil fuel. Anaerobic fermentation, photo fermentation, microbial and enzymatic photolysis or combinations of such techniques are new approaches for producing biohydrogen. For cost-effective biohydrogen production, the substrate should be cheap and renewable. Substrates including algal biomass, agriculture residue, and wastewaters are readily available. Moreover, substrates rich in starch and cellulose such as plant stalks or agricultural waste, or food industry waste such as cheese whey are reported to support dark- and photo-fermentation. However, their direct utilization as a substrate is not recommended due to their complex nature. Therefore, they must be pretreated before use to release fermentable sugars. Various pretreatment technologies have been established and are still being developed. This article focuses on pretreatment techniques for biohydrogen production and discusses their efficiency and suitability, including hybrid-treatment technology.

Sustainability in Heritage Wood Conservation: Challenges and Directions for Future Research

Conserving the world’s cultural and natural heritage is considered a key contributor to achieving the targets set out in the United Nation’s Sustainable Development Goals, yet how much attention do we pay to the methods we use to conserve and protect this heritage? With a specific focus on wooden objects of cultural heritage, this review discusses the current state-of-the-art in heritage conservation in terms of sustainability, sustainable alternatives to currently used consolidants, and new research directions that could lead to more sustainable consolidants in the future. Within each stage a thorough discussion of the synthesis mechanisms and/or extraction protocols, particularly for bio-based resources is provided, evaluating resource usage and environmental impact. This is intended to give the reader a better understanding of the overall sustainability of each different approach and better evaluate consolidant choices for a more sustainable approach. The challenges facing the development of sustainable consolidants and recent research that is likely to lead to highly sustainable new consolidant strategies in the future are also discussed. This review aims to contribute to the ongoing discussion of sustainable conservation and highlight the role that consolidants play in truly sustainable heritage conservation.

Transparent Cellulose-Based Films Prepared from Used Disposable Paper Cups via an Ionic Liquid

Paper cups are widely employed in daily life with many advantages, but most of the used paper cups are incinerated or landfilled, due to the great challenge of separating the thin inner polyethylene (PE) coating, causing the waste of energy and the pollution of our environment. Therefore, recycling and converting the used paper cups into high-value materials is meaningful and important. In this work, transparent cellulose-based films were successfully prepared from the used paper cups via 1-allyl-3-methylimidazolium chloride ionic liquid after simple pretreatment. Additionally, the difference in properties and structures of cellulose-based films regenerated in different coagulation baths (water or ethanol) was also explored. It was found that the cellulose-based film possessed good thermal property and displayed better hydrophobicity than the traditional pure cellulose film. Moreover, they also demonstrated good mechanical property and the tensile strength of cellulose-based film regenerated in water can reach 31.5 Mpa, higher than those of cellulose-based film regenerated in ethanol (25.5 Mpa) and non-degradable polyethylene film (9-12 MPa), indicating their great potential as the packaging materials. Consequently, valorization of the low cost used paper cups and preparation of high-valve cellulose-based films were realized simultaneously by a facile and green process.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Properties and applications of cellulose regenerated from cellulose/imidazolium-based ionic liquid/co-solvent solutions: A short review

An improvement of ecological conscience currently has increased the consciousness of researchers in reducing the processing time and cost of solvent for the dissolution of cellulose. Latterly, ionic liquids have been employed to process cellulose as they are recyclable and nonvolatile. Besides that, biopolymers such as chitosan, chitin, starch, protein, and cellulose acetate can also be processed by using ionic liquids for diverse applications. In this short review, examples of imidazolium-based ionic liquids that are commonly used for the dissolution of cellulose are implied. Furthermore, examples of organic liquids that are utilized as co-solvents for ionic liquids were revealed. In addition, examples of imidazolium-based ionic liquid/co-solvent mixtures utilized in the dissolution of cellulose and other biopolymers are also demonstrated. The properties and applications of cellulose and its blends regenerated from different types of cellulose/imidazolium-based ionic liquid/co-solvent solutions are also shortly reviewed. The information acquired from this review gives a better understanding of the changes in the properties of regenerated cellulose and regenerated cellulose blends. In addition, this short review serves as a model basis for the creation of novel applications of regenerated cellulose and regenerated cellulose blends by utilizing imidazolium-based ionic liquid/co-solvent mixtures.

Designing cellulose hydrogels from non-woody biomass

Hydrogels are an attractive system for a myriad of applications. While most hydrogels are usually formed from synthetic materials, lignocellulosic biomass appears as a sustainable alternative for hydrogel development. The valorization of biomass, especially the non-woody biomass to meet the growing demand of the substitution of synthetics and to leverage its benefits for cellulose hydrogel fabrication is attractive. This review aims to present an overview of advances in hydrogel development from non-woody biomass, especially using native cellulose. The review will cover the overall process from cellulose depolymerization, dissolution to crosslinking reaction and the related mechanisms where known. Hydrogel design is heavily affected by the cellulose solubility, crosslinking method and the related processing conditions apart from biomass type and cellulose purity. Hence, the important parameters for rational designs of hydrogels with desired properties, particularly porosity, transparency and swelling characteristics will be discussed. Current challenges and future perspectives will also be highlighted.

The Dual Effect of Ionic Liquid Pretreatment on the Eucalyptus Kraft Pulp during Oxygen Delignification Process

Oxygen delignification presents high efficiency but causes damage to cellulose, therefore leading to an undesired loss in pulp strength. The effect of ionic liquid pretreatment of [BMIM][HSO₄] and [TEA][HSO₄] on oxygen delignification of the eucalyptus kraft pulp was investigated at 10% IL loading and 10% pulp consistency, after which composition analysis, pulp and fiber characterizations, and the mechanism of lignin degradation were carried out. A possible dual effect of enhancing delignification and protecting fibers from oxidation damage occurred simultaneously. The proposed [TEA][HSO₄] pretreatment facilitated lignin removal in oxygen delignification and provided fibers with improved DP, fiber length and width, and curl index, resulting in the enhanced physical strength of pulp. Particularly, its folding endurance improved by 110%. An unusual brightness reduction was identified, followed by detailed characterization on the pulps and extracted lignin with FTIR, UV, XPS, and HSQC. It was proposed that [TEA][HSO₄] catalyzed the cleavage of β-O-4 bonds in lignin during the oxygen delignification, with the formation of Hibbert’s ketones and quinonoid compounds. The decomposed lignin dissolved and migrated to the fiber surface, where they facilitated the access of the oxidation agent and protected the fiber framework from oxidation damage. Therefore, it was concluded that ionic liquid pretreatment has a dual effect on oxygen delignification.

Renewable biohydrogen production from lignocellulosic biomass using fermentation and integration of systems with other energy generation technologies

Biohydrogen is a clean and renewable source of energy. It can be produced by using technologies such as thermochemical, electrolysis, photoelectrochemical and biological, etc. Among these technologies, the biological method (dark fermentation) is considered more sustainable and ecofriendly. Dark fermentation involves anaerobic microbes which degrade carbohydrate rich substrate and produce hydrogen. Lignocellulosic biomass is an abundantly available raw material and can be utilized as an economic and renewable substrate for biohydrogen production. Although there are many hurdles, continuous advancements in lignocellulosic biomass pretreatment technology, microbial fermentation (mixed substrate and co-culture fermentation), the involvement of molecular biology techniques, and understanding of various factors (pH, T, addition of nanomaterials) effect on biohydrogen productivity and yield render this technology efficient and capable to meet future energy demands. Further integration of biohydrogen production technology with other products such as bio-alcohol, volatile fatty acids (VFAs), and methane have the potential to improve the efficiency and economics of the overall process. In this article, various methods used for lignocellulosic biomass pretreatment, technologies in trends to produce and improve biohydrogen production, a coproduction of other energy resources, and techno-economic analysis of biohydrogen production from lignocellulosic biomass are reviewed.

Lignocellulose Biomass as a Multifunctional Tool for Sustainable Catalysis and Chemicals: An Overview

Today, the theme of environmental preservation plays an important role within the activities of the scientific community and influences the choices of politics and the common population. In this context, the use of non-fossil substances should be promoted for different reasons: to avoid the depletion and damage of the areas involved in the fossil fuel extraction, decrease the impact of emissions/by-products related to the industrial transformation of fossil-based products and possibly exploit residual biomasses as sources of carbon. This latter aspect also can be viewed as a way to revalorize lignocellulose waste, generally destined to dump as putrescible matter or to be incinerated. In this review, we are aiming to present a concise overview of the multiple functions of lignocellulose biomass in the broad field of catalysis for a sustainable development. The originality of the approach is considering the lignocellulose-derived matter in three different aspects: (i) as a precursor to convert into platform molecules, (ii) as an active material (i.e., humic-like substances as photosensitizers) and (iii) as a green support for catalytic applications. We find that this perspective can widen the awareness level of scientists involved in the catalysis field for the exploitation of residual biomass as a valuable and complementary resource.

Thermophysical Properties of 1-Octyl-3-Methylimidazolium Acetate with Organic Solvents

Ionic liquid (IL) usually possesses high viscosity. In this work, the selected organic solvents, namely, dimethyl sulfoxide, N,N-dimethylacetamide, and N,N-dimethylformamide, were used as the diluents to lower IL viscosity. The thermophysical properties of the densities and viscosities for the binary mixtures of IL (i.e., 1-octyl-3-methylimidazolium acetate) with solvents were studied at normal pressure in the temperature ranges of 303.15 K to 348.15 K. The effects of the organic solvents on lowering IL viscosity were quantitatively evaluated. The excess properties of the mixtures were calculated to analyze the interactions between IL and solvents. The hard-sphere model was employed to reproduce the viscosity behavior of the pure substances and binary mixtures.

From Cellulose to Cellulose Nanofibrils-A Comprehensive Review of the Preparation and Modification of Cellulose Nanofibrils

This review summarizes the preparation methods of cellulose nanofibrils (CNFs) and the progress in the research pertaining to their surface modification. Moreover, the preparation and surface modification of nanocellulose were comprehensively introduced based on the existing literature. The review focuses on the mechanical treatment of cellulose, the surface modification of fibrillated fibers during pretreatment, the surface modification of nanocellulose and the modification of CNFs and their functional application. In the past five years, research on cellulose nanofibrils has progressed with developments in nanomaterials research technology. The number of papers on nanocellulose alone has increased by six times. However, owing to its high energy consumption, high cost and challenging industrial production, the applications of nanocellulose remain limited. In addition, although nanofibrils exhibit strong biocompatibility and barrier and mechanical properties, their high hydrophilicity limits their practical application. Current research on cellulose nanofibrils has mainly focused on the industrial production of CNFs, their pretreatment and functional modification and their compatibility with other biomass materials. In the future, with the rapid development of modern science and technology, the demand for biodegradable biomass materials will continue to increase. Furthermore, research on bio-based nanomaterials is expected to advance in the direction of functionalization and popularization.

Factors Affecting the Nonsolvent-Induced Phase Separation of Cellulose from Ionic Liquid-Based Solutions

In the present work, we report for the first time an in-depth study of the factors influencing porous cellulose film structure formation during the nonsolvent-induced phase separation (NIPS) process from biopolymer solutions in ionic liquid-based solvents. The length of the alkyl chain of the ionic liquid's cation, the solvent/co-solvent ratio, and the type of the cellulose precursor used were found to have great influence both on cellulose solution formation and properties and to the NIPS process with water acting as nonsolvent. In the undiluted form, both studied ionic liquids proved to dissolve almost equally well the cellulose; however, due to differences in viscosities of the formed biopolymer solutions and due to differences in miscibility with water of the two ionic liquids, the used ionic liquid had a strong influence on the film's porous structure formation. The use of increasing amounts of an aprotic co-solvent, here dimethylsulfoxide, improved biopolymer solubilization and also led to the formation of a more pronounced macroporous structure during the NIPS process. The cellulose type also affected the porous structure generation during the NIPS process: with the increase of the molecular weight of the precursor, the viscosity of the formed biopolymer solution increased and the tendency to generate macroporous structures decreased.

Present and Future Perspectives for Biocides and Antifouling Products for Stone-Built Cultural Heritage: Ionic Liquids as a Challenging Alternative

This review offers an overview of the most recent research activities on counteracting the biodeterioration process of stone monuments, underlining all those aspects regarding eventual procedural drawbacks and compliance with sustainable criteria. For this purpose, the definition of “green conservation of cultural heritage” has been proposed. Its basics have been utilized in the text to highlight the issues arising from the most common conservative procedures as well as guidelines for the development of innovative technologies. The review then deals with the most innovative antimicrobial approaches, among which nano- and bio-technologies play a main role. Ionic liquids are a special class of salts, which can be prepared by applying Safe by Design concepts, to meet the Green Conservation criteria.

Ionic Liquids as Antifungal Agents for Wood Preservation

Ionic liquids represent a class of highly versatile organic compounds used extensively in the last decade for lignocellulose biomass fractionation and dissolution, as well as property modifiers for wood materials. This review is dedicated to the use of ionic liquids as antifungal agents for wood preservation. Wood preservation against fungal attack represents a relatively new domain of application for ionic liquids, emerging in the late 1990s. Comparing to other application domains of ionic liquids, this particular one has been relatively little researched. Ionic liquids may be promising as wood preservatives due to their ability to swell wood, which translates into better penetration ability and fixation into the bulk of the wood material than other conventional antifungal agents, avoiding leaching over time. The antifungal character of ionic liquids depends on the nature of their alkyl-substituted cation, on the size and position of their substituents, and of their anion. It pertains to a large variety of wood-colonizing fungi, both Basidiomycetes and Fungiimperfecti.

Manufacture of Platform Chemicals from Pine Wood Polysaccharides in Media Containing Acidic Ionic Liquids

Pinus pinaster wood samples were subjected to chemical processing for manufacturing furans and organic acids from the polysaccharide fractions (cellulose and hemicellulose). The operation was performed in a single reaction stage at 180 or 190 °C, using a microwave reactor. The reaction media contained wood, water, methyl isobutyl ketone, and an acidic ionic liquid, which acted as a catalyst. In media catalyzed with 1-butyl-3-methylimidazolium hydrogen sulfate, up to 60.5% pentosan conversion into furfural was achieved, but the conversions of cellulose and (galacto) glucomannan in levulinic acid were low. Improved results were achieved when AILs bearing a sulfonated alkyl chain were employed as catalysts. In media containing 1-(3-sulfopropyl)-3-methylimidazolium hydrogen sulfate as a catalyst, near quantitative conversion of pentosans into furfural was achieved at a short reaction time (7.5 min), together with 32.8% conversion of hexosans into levulinic acid. Longer reaction times improved the production of organic acids, but resulted in some furfural consumption. A similar reaction pattern was observed in experiments using 1-(3-sulfobutyl)-3-methylimidazolium hydrogen sulfate as a catalyst.

Effect of SILPs on the Vulcanization and Properties of Ethylene-Propylene-Diene Elastomer

Ionic liquids (ILs) are increasingly used in elastomer technology due to unique physico-chemical properties, which are stable at the temperature of preparation and during processing of rubber compounds. The latest IL application concept is supported ionic liquid-phase (SILP) materials, where an IL film is immobilized on the solid phase. The main aim of this work was studying the influence of IL immobilized on the surface of solid supports, such as silica and carbon black, on the vulcanization process, mechanical properties, and thermal behavior of ethylene–propylene–diene (EPDM) elastomer. Application of the SILP materials enabled the control of EPDM vulcanization without deterioration of the crosslink density, damping properties, thermal stability, and resistance of the vulcanizates to thermo-oxidative aging. Slight improvements in the tensile strength and hardness of the vulcanizates were observed.

Unidirectional All-Cellulose Composites from Flax via Controlled Impregnation with Ionic Liquid

Mechanically strong all-cellulose composites are very attractive in the terms of fully bio-based and bio-degradable materials. Unidirectional flax-based all-cellulose composites are prepared via facile room-temperature impregnation with an ionic liquid, 1-ethyl-3-methyl imidazolium acetate. To determine the optimal processing conditions, the kinetics of flax dissolution in this solvent is first studied using optical microscopy. Composite morphology, crystallinity, density, the volume fraction of cellulose II and tensile properties are investigated, indicating that flax dissolution should be within certain limits. On the one hand, the amount of cellulose II formed through dissolution and coagulation should be high enough to “fuse” flax fibers, resulting in a density increase. On the other hand, only the surface layer of the fibers should be dissolved to maintain the strength provided by the inner secondary layer and avoid a detrimental decrease in crystallinity. The highest Young’s modulus and strength, 10.1 GPa and 151.3 MPa, respectively, are obtained with a crystallinity of 43% and 20 vol% of cellulose II.

Impact of the Surface Properties of Cellulose Nanocrystals on the Crystallization Kinetics of Poly(Butylene Succinate)

The hydrophilicity of cellulose nanocrystals (CNCs) is a major challenge for their processing with hydrophobic polymers and matrices. As a result, many surface modifications have been proposed to hydrophobize CNCs. The authors showed in an earlier study that grafting alcohols of different chain lengths onto the surface of CNCs using toluene diisocyanate (TDI) as a linker can systematically hydrophobize CNCs to a water contact angle of up to 120° depending on the alcohol chain length. Then, the hydrophobized CNCs were used to mechanically reinforce poly(butylene succinate) (PBS), which is a hydrophobic polymer. As a result of hydrophobization, PBS/CNCs interfacial adhesion and the composite mechanical properties significantly improved with the increasing CNC contact angle. Continuing on these results, this paper investigates the impact of CNC surface properties on the crystallization behavior of PBS using differential scanning calorimetry (DSC). The results showed that the crystallization temperature of PBS increased from 74.7 °C to up to 86.6 °C as a result of CNC nucleation activity, and its value was proportionally dependent on the contact angle of the CNCs. In agreement, the nucleation activity factor (φ) estimated using Dobreva and Gutzow’s method decreased with the increasing CNC contact angle. Despite the nucleation action of CNCs, the rate constant of PBS crystallization as estimated using the Avrami model decreased in general as a result of a prevailing impeding effect. This decrease was minimized with increasing the contact angle of the CNCs. The impeding effect also increased the average activation energy of crystallization, which was estimated using the Kissinger method. Moreover, the Avrami exponent (n) decreased because of CNC addition, implying a heterogeneous crystallization, which was also apparent in the crystallization thermograms. Overall, the CNC addition facilitated PBS nucleation but retarded its crystallization, and both processes were significantly affected by the surface properties of the CNCs.