Isolation and Characterization of Cellulose from Different Fruit and Vegetable Pomaces

Innovative food-upcycling solutions: Comparative analysis of edible films from kimchi-extracted cellulose, sorbitol, and citric acid for food packaging applications

In this study, kimchi-extracted cellulose was utilized to fabricate edible films using a hot synthetic approach, followed by solvent casting, and employing sorbitol and citric acid as the plasticizer and crosslinker, respectively. The chemical, optical, physical, and thermal properties of these films were explored to provide a comparative assessment of their suitability for various packaging applications. Chemical analyses confirmed that the kimchi-extracted cellulose comprised cellulose Iβ and amorphous cellulose and did not contain any impurities. Optical analyses revealed that kimchi-extracted cellulose-containing films exhibited better-dispersed surfaces than films fabricated from commercial cellulose. Physical property analyses indicated their hydrophilic characteristics with contact angles <20°. In the thermal analysis, similar Tg results confirmed the comparable thermal stability between films containing commercial microcrystalline cellulose-containing films and kimchi-extracted cellulose-containing films. Edible films produced from kimchi-extracted cellulose through food-upcycling approaches are therefore promising for applications as packaging materials.

From Waste to Consumption: Tomato Peel Flour in Hamburger Patty Production

Tomato is a widely cultivated crop and its processing produces large quantities of wastes, such as pulp, seed, and peel. In recent years, the valorization of these wastes in the production of high-value-added food products has gained popularity in achieving environmental sustainability and zero waste. From this viewpoint, dried tomato peel (DTP-1%, 2%, 3%, 4%) flour was included in hamburger formulations. In patty samples, ash, carbohydrate, and dietary fiber amounts were increased due to the high fiber content of DTP flour, while moisture and fat percentages decreased with increasing amounts of DTP flour (p < 0.05). The inclusion of DTP flour retarded lipid oxidation during cooking (p < 0.05). The significantly highest cooking yield was calculated in samples including 4% DTP flour. In parallel, water-holding capacity, moisture, and fat retention values increased with increasing levels of DTP flour (p < 0.05). The enrichment of patties with DTP flour resulted in hard texture, less gumminess, and a darker, more reddish and yellowish color (p < 0.05). Hamburger samples containing 1% or 2% DTP flour were graded with closer scores in the sensory panel as compared to the control (0% DTP). Overall, our findings demonstrated that DTP flour up to 2% could be used to improve the nutritional and technological properties of patty samples.

Extraction of cellulose from halophytic plants for the synthesis of a novel biocomposite

Cellulose nanofibers, a sustainable and promising material with widespread applications, exhibit appreciable strength and excellent mechanical and physicochemical properties. The preparation of cellulosic nanofibers from food or agricultural residue is not sustainable. Therefore, this study was designed to use three halophytic plants (Cressa cretica, Phragmites karka, and Suaeda fruticosa) to extract cellulose for the subsequent conversion to cellulosic nanofibers composites. The other extracted biomass components including lignin, hemicellulose, and pectin were also utilized to obtain industrially valuable enzymes. The maximum pectinase (31.56 IU mL-1), xylanase (35.21 IU mL-1), and laccase (15.89 IU mL-1) were produced after the fermentation of extracted pectin, hemicellulose, and lignin from S. fruticosa, P. karka, and C. cretica, respectively. Cellulose was methylated (with a degree of substitution of 2.4) and subsequently converted into a composite using polyvinyl alcohol. Scanning electron microscopy and Fourier-transform infrared spectroscopy confirmed the successful synthesis of the composites. The composites made up of cellulose from C. cretica and S. fruticosa had a high tensile strength (21.5 and 15.2 MPa) and low biodegradability (47.58% and 44.56%, respectively) after dumping for 3 months in soil, as compared with the composite from P. karka (98.79% biodegradability and 4.9 MPa tensile strength). Moreover, all the composites exhibited antibacterial activity against gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) and gram-positive bacteria (Staphylococcus aureus). Hence, this study emphasizes the possibility for various industrial applications of biomass from halophytic plants.

Tomato Residue Management from a Biorefinery Perspective and towards a Circular Economy

The tomato industry is a relevant socio-economic activity in the European Union, while it generates a large variety of residues. Tomatoes unfit for consumption, tomato peels, seeds, industrial pomace, and plants are examples of residues of this industry. Commonly, some of the residues can be left in the field, composted, used for animal feeding, or valorized through anaerobic digestion. However, more economic value can be attributed to these residues if a biorefinery approach is applied. Indeed, many value-added compounds can be obtained by the integration of different processes while closing the carbon and nutrient loops. The extraction of bioactive compounds followed by anaerobic digestion and composting seems to be a viable proposal for a biorefinery approach. Thus, this study aims to review the biorefinery strategies for valorizing tomato residues, highlighting the main processes proposed. The recovery of lycopene, β-carotene, and phenolic compounds has been widely studied at the lab scale, while energy recovery has already been applied at the industrial scale. Although techno-economic analysis is scarce for tomato residue valorization processes, positive net present values (NPV) and low payback times (PBT) have been reported in the literature. Thus, more work comparing multiple extraction technologies and biorefinery strategies coupled with economic and environmental assessment should be performed to select the most promising management route for tomato residues.

Lignin-cellulose complexes derived from agricultural wastes for combined antibacterial and tissue engineering scaffolds for cutaneous leishmaniasis wounds

Bacterial infections in wounds significantly impair the healing process. The use of natural antibacterial products over synthetic antibiotics has emerged as a new trend to address antimicrobial resistance. An ideal tissue engineering scaffold to treat infected wounds should possess antibacterial properties, while simultaneously promoting tissue regrowth. Synthesis of hydrogel scaffolds with antibacterial properties using hemp shive (HT1/HT2) lignin, sugarcane bagasse (SCB) lignin and cellulose was carried out. All lignin samples had low molecular weights and were constituted of G-type β-5 dimers, linked by β-O-4 bonds, as determined by MALDI-TOF-MS. Hemp lignin was more cytotoxic to mouse fibroblasts (L929) compared to SCB lignin. All lignin samples demonstrated antibacterial properties against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Enterococcus faecalis, with greater efficiency against Gram-negative strains. 3D hydrogels were engineered by crosslinking SCB lignin with SCB cellulose in varying weight ratios in the presence of epichlorohydrin. The stiffness of the hydrogels could be tailored by varying the lignin concentration. All hydrogels were biocompatible; however, better fibroblast adhesion was observed on the blended hydrogels compared to the 100% cellulose hydrogel, with the cellulose : lignin 70 : 30 hydrogel showing the highest L929 proliferation and best antibacterial properties with a 24-hour bacterial growth reduction ranging from 30.8 to 57.3%.

Structural characterization of strawberry pomace

Strawberries are a nutrient dense food rich in vitamins, minerals, non-nutrient antioxidant phenolics, and fibers. Strawberry fiber bioactive structures are not well characterized and limited information is available about the interaction between strawberry fiber and phenolics. Therefore, we analyzed commercial strawberry pomace in order to provide a detailed carbohydrate structural characterization, and to associate structures with functions. The pomace fraction, which remained after strawberry commercial juice extraction, contained mostly insoluble (49.1 % vs. 5.6 % soluble dietary fiber) dietary fiber, with pectin, xyloglucan, xylan, β-glucan and glucomannan polysaccharides; glucose, fructose, xylose, arabinose, galactose, fucose and galacturonic acid free carbohydrates; protein (15.6 %), fat (8.34 %), and pelargonidin 3-glucoside (562 μg/g). Oligosaccharides from fucogalacto-xyloglucan, methyl-esterified rhamnogalacturonan I with branched arabinogalacto-side chains, rhamnogalacturonan II, homogalacturonan and β-glucan were detected by MALDI-TOF MS, NMR and glycosyl-linkage analysis. Previous reports suggest that these oligosaccharide and polysaccharide structures have prebiotic, bacterial pathogen anti-adhesion, and cholesterol-lowering activity, while anthocyanins are well-known antioxidants. A strawberry pomace microwave acid-extracted (10 min, 80 °C) fraction had high molar mass (2376 kDa) and viscosity (3.75 dL/g), with an extended rod shape. A random coil shape, that was reported previously to bind to phenolic compounds, was observed for other strawberry microwave-extracted fractions. These strawberry fiber structural details suggest that they can thicken foods, while the polysaccharide and polyphenol interaction indicates great potential as a multiple-function bioactive food ingredient important for gut and metabolic health.

Enhancing Cutin Extraction Efficiency from Industrially Derived Tomato Processing Residues by High-Pressure Homogenization

This study primarily aimed to enhance the extraction of cutin from industrial tomato peel residues. Initially, the conventional extraction process was optimized using response surface methodology (RSM). Subsequently, high-pressure homogenization (HPH) was introduced to improve extraction efficiency and sustainability. The optimization process focused on determining the optimal conditions for conventional extraction via chemical hydrolysis, including temperature (100-130 °C), time (15-120 min), and NaOH concentration (1-3%). The optimized conditions, determined as 130 °C, 120 min, and 3% NaOH solution, yielded a maximum cutin extraction of 32.5%. Furthermore, the results indicated that applying HPH pre-treatment to tomato peels before alkaline hydrolysis significantly increased the cutin extraction yield, reaching 46.1%. This represents an approximately 42% increase compared to the conventional process. Importantly, HPH pre-treatment enabled cutin extraction under milder conditions using a 2% NaOH solution, reducing NaOH usage by 33%, while still achieving a substantial cutin yield of 45.6%. FT-IR analysis confirmed that cutin obtained via both conventional and HPH-assisted extraction exhibited similar chemical structures, indicating that the main chemical groups and structure of cutin remained unaltered by HPH treatment. Furthermore, cutin extracts from both conventional and HPH-assisted extraction demonstrated thermal stability up to approximately 200 °C, with less than 5% weight loss according to TGA analysis. These findings underscore the potential of HPH technology to significantly enhance cutin extraction yield from tomato peel residues while utilizing milder chemical hydrolysis conditions, thereby promoting a more sustainable and efficient cutin extraction process.

Preparation, characterization, and evaluation of ketoconazole-loaded pineapple cellulose green nanofiber gel

The present study involves the isolation of cellulose nanofibers from pineapple crown waste by a combined alkali-acid treatment method. The extracted pineapple nanofibers were characterized by Fourier-transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, nuclear magnetic resonance, high-resolution transmission electron microscopy, and dynamic light scattering. The extracted pineapple nanofibers were then incorporated in Carbopol 934P containing ketoconazole to prepare a ketoconazole-loaded pineapple nanofibrous gel. The prepared gel formulation was evaluated for viscosity, spreadability, extrudibility, pH, drug content, and texture profile analysis. The anticipated gel formulation was further evaluated by in vitro drug release (98.57 ± 0.58 %), ex vivo drug permeation, cytotoxicity, and histopathological studies. The permeation of the drug through skin determined by the ex-vivo diffusion study was found to be 38.27 % with a flux rate of 4.06 ± 0.26 μg/cm2/h. Further, the cytotoxicity study of pineapple nanofiber and ketoconazole-loaded nanofiber gel displayed no cytotoxic on healthy vero cells in the concentration range from 10 to 80 μg/ml. The histopathological analysis exhibited no signs of distress and inflammation. In conclusion, ketoconazole-loaded pineapple nanofiber gel could be considered as a promising delivery system for topical applications.

Emulsification Characteristics of Insoluble Dietary Fibers from Pomelo Peel: Effects of Acetylation, Enzymatic Hydrolysis, and Wet Ball Milling

To improve the application potential of pomelo peel insoluble dietary fiber (PIDF) in emulsion systems, acetylation (PIDF-A), cellulase hydrolysis (PIDF-E), and wet ball milling (PIDF-M) were investigated in this paper as methods to change the emulsification properties of PIDF. The impact of the methods on PIDF composition, structure, and physicochemical properties was also assessed. The results demonstrated that both acetylation modification and cellulase hydrolysis could significantly improve the emulsification properties of PIDF. The emulsions stabilized with PIDF-A and PIDF-E could be stably stored at 25 °C for 30 d without phase separation at particle concentrations above 0.8% (w/v) and had higher storage stability: The D4,3 increments of PIDF-A- and PIDF-E-stabilized emulsions were 0.98 μm and 0.49 μm, respectively, at particle concentrations of 1.2% (w/v), while the storage stability of PIDF-M-stabilized emulsion (5.29 μm) significantly decreased compared with that of PIDF (4.00 μm). Moreover, PIDF-A showed the highest water retention capacity (21.84 g/g), water swelling capacity (15.40 mL/g), oil retention capacity (4.67 g/g), and zeta potential absolute (29.0 mV) among the PIDFs. In conclusion, acetylation modification was a promising method to improve the emulsifying properties of insoluble polysaccharides.

Recent advances in production of sustainable and biodegradable polymers from agro-food waste: Applications in tissue engineering and regenerative medicines

Agro-food waste is a rich source of biopolymers such as cellulose, chitin, and starch, which have been shown to possess excellent biocompatibility, biodegradability, and low toxicity. These properties make biopolymers from agro-food waste for its application in tissue engineering and regenerative medicine. Thus, this review highlighted the properties, processing methods, and applications of biopolymers derived from various agro-food waste sources. We also highlight recent advances in the development of biopolymers from agro-food waste and their potential for future tissue engineering and regenerative medicine applications, including drug delivery, wound healing, tissue engineering, biodegradable packaging, excipients, dental applications, diagnostic tools, and medical implants. Additionally, it explores the challenges, prospects, and future directions in this rapidly evolving field. The review showed the evolution of production techniques for transforming agro-food waste into valuable biopolymers. However, these biopolymers serving as the cornerstone in scaffold development and drug delivery systems. With their role in wound dressings, cell encapsulation, and regenerative therapies, biopolymers promote efficient wound healing, cell transplantation, and diverse regenerative treatments. Biopolymers support various regenerative treatments, including cartilage and bone regeneration, nerve repair, and organ transplantation. Overall, this review concluded the potential of biopolymers from agro-food waste as a sustainable and cost-effective solution in tissue engineering and regenerative medicine, offering innovative solutions for medical treatments and promoting the advancement of these fields.

Development of Plum Seed-Derived Carboxymethylcellulose Bioink for 3D Bioprinting

Three-dimensional bioprinting represents an innovative platform for fabricating intricate, three-dimensional (3D) tissue structures that closely resemble natural tissues. The development of hybrid bioinks is an actionable strategy for integrating desirable characteristics of components. In this study, cellulose recovered from plum seed was processed to synthesize carboxymethyl cellulose (CMC) for 3D bioprinting. The plum seeds were initially subjected to α-cellulose recovery, followed by the synthesis and characterization of plum seed-derived carboxymethyl cellulose (PCMC). Then, hybrid bioinks composed of PCMC and sodium alginate were fabricated, and their suitability for extrusion-based bioprinting was explored. The PCMC bioinks exhibit a remarkable shear-thinning property, enabling effortless extrusion through the nozzle and maintaining excellent initial shape fidelity. This bioink was then used to print muscle-mimetic 3D structures containing C2C12 cells. Subsequently, the cytotoxicity of PCMC was evaluated at different concentrations to determine the maximum acceptable concentration. As a result, cytotoxicity was not observed in hydrogels containing a suitable concentration of PCMC. Cell viability was also evaluated after printing PCMC-containing bioinks, and it was observed that the bioprinting process caused minimal damage to the cells. This suggests that PCMC/alginate hybrid bioink can be used as a very attractive material for bioprinting applications.

Utilization of wild Cressa cretica biomass for pectinase production from a halo-thermotolerant bacterium

Halophytes are the native inhabitants of saline environment. Their biomass can be considered as a potential substrate for the production of microbial enzymes. This study was intended at feasible utilization of a halophytic biomass, Cressia cretica, for pectinase production using a halo- and thermo-tolerant bacterium, Bacillus vallismortis MH 10. The data from fractionation of the C. cretica biomass revealed presence of 17% pectin in this wild biomass. Seven different factors (temperature, agitation, pH, inoculum size, peptone concentration, substrate concentration, and incubation time) affecting pectinase production using C. cretica were assessed through a statistical tool, Plackett-Burman design. Consequently, two significant factors (incubation time and peptone concentration) were optimized using the central composite design. The strain produced 20 IU mL-1 of pectinase after 24 h under optimized conditions. The enzyme production kinetics data also confirmed that 24 h is the most suitable cultivation period for pectinase production. Fourier transform infrared spectroscopy and scanning electron microscopy of C. cretica biomass ascertained utilization of pectin and structural changes after fermentation. The purification of pectinase by using DEAE column yielded specific activity and purification fold of 88.26 IU mg-1 and 3.2, respectively. The purified pectinase had a molecular weight of >65 kDa. This study offers prospects of large-scale production of pectinase by halotolerant strain in the presence of economical and locally grown substrate that makes the enzyme valuable for various industrial operations.

Sustainable polysaccharide and protein hydrogel-based packaging materials for food products: A review

Sustainable food packaging is a necessary element to ensure the success of a food system, the accomplishment of which is weighed in terms of quality retention and ensured products safety. Irrespective of the raised environmental concerns regarding petroleum-based packaging materials, a sustainable analysis and a lab to land assessment should be a priority to eliminate similar fates of new material. Functionalized bio-based hydrogels are one of the smartest packaging inventions that are expected to revolutionize the food packaging industry. Although in this review, the focus relies on recent developments in the sustainable bio-based hydrogel packaging materials, natural biopolymers such as proteins and polysaccharides from which hydrogels could be obtained, the challenges encountered in hydrogel-based packaging materials and the future prospects of hydrogel-based food packaging materials are also discussed. Moreover, the need for 'Life Cycle Assessment' (LCA), stress on certifications and a sustainable waste management system is also suggested which can bring both food and packaging into the same recycling bins.

Modeling and Optimizing the Crystal Violet Dye Adsorption on Kaolinite Mixed with Cellulose Waste Red Bean Peels: Insights into the Kinetic, Isothermal, Thermodynamic, and Mechanistic Study

In this study, a new eco-friendly kaolinite-cellulose (Kaol/Cel) composite was prepared from waste red bean peels (Phaseolus vulgaris) as a source of cellulose to serve as a promising and effective adsorbent for the removal of crystal violet (CV) dye from aqueous solutions. Its characteristics were investigated through the use of X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and zero-point of charge (pH_pzc). The Box-Behnken design was used to improve CV adsorption on the composite by testing its primary affecting factors: loading Cel into the composite matrix of Kaol (A: 0-50%), adsorbent dosage (B: 0.02-0.05 g), pH (C: 4-10), temperature (D: 30-60 °C), and duration (E: 5-60 min). The significant interactions with the greatest CV elimination efficiency (99.86%) are as follows: BC (adsorbent dose vs. pH) and BD (adsorbent dose vs. temperature) at optimum parameters (A: 25%, B: 0.05 g, C: 10, D: 45 °C, and E: 17.5 min) for which the CV's best adsorption capacity (294.12 mg/g) was recorded. The Freundlich and pseudo-second-order kinetic models were the best isotherm and kinetic models fitting our results. Furthermore, the study investigated the mechanisms responsible for eliminating CV by utilizing Kaol/Cel-25. It detected multiple types of associations, including electrostatic, n-π, dipole-dipole, hydrogen bonding interactions, and Yoshida hydrogen bonding. These findings suggest that Kaol/Cel could be a promising starting material for developing a highly efficient adsorbent that can remove cationic dyes from aqueous environments.

Production of a nascent cellulosic material from vegetable waste: Synthesis, characterization, functional properties, and its potency for a cationic dye removal

The present work reports the production of cellulose nanocrystals, CNC₃₀ and CNC₆₀, developed using vegetable waste, i.e., bottle gourd peel through sulfuric acid hydrolysis with a 30 and 60 min hydrolysis process coupled with ultrasonication. The FTIR confirmed the absence of hemicellulose and lignin, and XRD confirmed the crystallinity of the cellulose nanocrystals. DLS studies indicated the hydrodynamic diameter of CNC₃₀ and CNC₆₀ to be 195.5 nm and 192.2 nm, respectively. The TEM image and SAED pattern established the shape of CNC₆₀ to be spherical, with an average particle size of 38.32 nm. CNC₆₀ possessed lesser negative potential and higher thermal stability than CNC₃₀, possibly due to the demolition of the crystalline regions containing sulfate groups. The functional properties, such as swelling power, water, and oil holding capacities of CNC₆₀, were superior to that of CNC₃₀. The adsorption batch parameters yielded 95.68 % methylene dye removal by CNC₆₀ against the predicted value of 96.16 % by the RSM-PSO hybrid approach. The analyses of adsorption isotherms, kinetics, and thermodynamic parameters revealed the nature of the adsorbed layer and adsorption mechanism. Overall observations recommend that CNC₆₀ could be a good and potent functional agent in paper technology, food technology, water treatment, and biomedical applications.

Essential characteristics improvement of metallic nanoparticles loaded carbohydrate polymeric films - A review

Petroleum-based films have contributed immensely to various environmental issues. Developing green-based films from carbohydrate polymers is crucial for addressing the harms encountered. However, some limitations exist on their property, processibility, and applicability that prohibit their processing for further developments. This review discusses the potential carbohydrate polymers and their sources, film preparation methods, such as solvent-casting, tape-casting, extrusion, and thermo-mechanical compressions for green-based films using various biological polymers with their merits and demerits. Research outcomes revealed that the essential characteristics improvement achieved by incorporating different metallic nanoparticles has significantly reformed the properties of biofilms, including crystallization, mechanical stability, thermal stability, barrier function, and antimicrobial activity. The property-enhanced bio-based films made with nanoparticles are potentially interested in replacing fossil-based films in various areas, including food-packaging applications. The review paves a new way for the commercial use of numerous carbohydrate polymers to help maintain a sustainable green environment.

Tomato waste biochar in the framework of circular economy

Tomato pomace was slowly pyrolyzed at 350 and 550 °C (under an N₂ flow of 50 L/h) at a rate of 6 °C/min and a residence time of 1:30 h to produce two biochars named B350 and B550, respectively. In addition, the two biochars were chemically activated with ΚΟΗ (at a ratio of 1:10 w/v) at 800 °C to produce two new materials named BA350 and BA550. The four biochars produced were characterized physically and chemically (pH, yield, calorific value). They were also analyzed by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (B.E.T), elemental analysis (EA), and thermogravimetric analysis (TGA). The results showed that as the pyrolysis temperature increased (350 to 550 °C), the specific surface area (SSA) increased. The latter was also significantly increased by the activation process. EA showed a variation in the mineral content of the produced biochars, resulting in a different content of the biochars after activation. The parameters studied showed that biochars from tomato waste could be used as an organic amendment to improve soil fertility in agricultural. In addition, because of their ability to absorb water, they could be used as a water reservoir in soils in arid areas.

Cellulose nanocrystalline from biomass wastes: An overview of extraction, functionalization and applications in drug delivery

Cellulose nanocrystals (CNC) have been extensively used in various fields due to their renewability, excellent biocompatibility, large specific surface area, and high tensile strength. Most biomass wastes contain significant amounts of cellulose, which forms the basis of CNC. Biomass wastes are generally made up of agricultural waste, and forest residues, etc. CNC can be produced from biomass wastes by removing the non-cellulosic components through acid hydrolysis, enzymatic hydrolysis, oxidation hydrolysis, and other mechanical methods. However, biomass wastes are generally disposed of or burned in a random manner, resulting in adverse environmental consequences. Hence, using biomass wastes to develop CNC-based carrier materials is an effective strategy to promote the high value-added application of biomass wastes. This review summarizes the advantages of CNC applications, the extraction process, and recent advances in CNC-based composites, such as aerogels, hydrogels, films, and metal complexes. Furthermore, the drug release characteristics of CNC-based material are discussed in detail. Additionally, we discuss some gaps in our understanding of the current state of knowledge and potential future directions of CNC-based materials.

Genome-wide characterization of the cellulose synthase gene family in Ziziphus jujuba reveals its function in cellulose biosynthesis during fruit development

The cellulose synthase (Ces/Csl) is a key enzyme in plant cellulose synthesis. Jujube fruits are rich in cellulose. 29 ZjCesA/Csl genes were identified in jujube genome and showed tissue-specific expression. 13 genes highly expressed in jujube fruit exhibited obviously sequential expressions during the fruit development, indicating that they might play distinct roles during the process. Meanwhile, the correlation analysis showed the expressions of ZjCesA1 and ZjCslA1 were significant positive related to the cellulose synthase activities. Furthermore, transient overexpressions of ZjCesA1 or ZjCslA1 in jujube fruits significantly increased cellulose synthase activities and contents, whereas silencing of ZjCesA1 or ZjCslA1 in jujube seedlings obviously reduced cellulose levels. Moreover, the Y2H assays verified that ZjCesA1 and ZjCslA1 may participate in cellulose synthesis by forming protein complexes. The study not only reveals the bioinformatics characteristics and functions of cellulose synthase genes in jujube, but also provides clues for studying cellulose synthesis in other fruits.

Reprocessing of side-streams towards obtaining valuable bacterial metabolites

Every year, all over the world, the industry generates huge amounts of residues. Side-streams are most often used as feed, landfilled, incinerated, or discharged into sewage. These disposal methods are far from perfect. Taking into account the composition of the side-streams, it seems that they should be used as raw materials for further processing, in accordance with the zero-waste policy and sustainable development. The article describes the latest achievements in biotechnology in the context of bacterial reprocessing of residues with the simultaneous acquisition of their metabolites. The article focuses on four metabolites - bacterial cellulose, propionic acid, vitamin B12 and PHAs. Taking into account global trends (e.g. food, packaging, medicine), it seems that in the near future there will be a sharp increase in demand for this type of compounds. In order for their production to be profitable and commercialised, cheap methods of its obtaining must be developed. The article, in addition to obtaining these bacterial metabolites from side-streams, also discusses e.g. factors affecting their production, metabolic pathways and potential and current applications. The presented chapters provide a complete overview of the current knowledge on above metabolites, which can be helpful for the academic and scientific communities and the several industries. KEY POINTS: • The industry generates millions of tons of organic side-streams each year. • Generated residues burden the natural environment. • A good and cost-effective method of side-streams management seems to be biotechnology - reprocessing with the use of bacteria. • Biotechnological disposal of side-streams gives the opportunity to obtain valuable compounds in cheaper ways: BC, PA, vitmain B12, PHAs.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

The Overexpression of Oryza sativa L. CYP85A1 Promotes Growth and Biomass Production in Transgenic Trees

Brassinosteroids (BRs) are important hormones that play crucial roles in plant growth, reproduction, and responses to abiotic and biotic stresses. CYP85A1 is a castasterone (CS) synthase that catalyzes C-6 oxidation of 6-deoxocastasterone (6-deoxoCS) to CS, after which CS is converted into brassinolide (BL) in a reaction catalyzed by CYP85A2. Here, we report the functional characteristics of rice (Oryza sativa L.) OsCYP85A1. Constitutive expression of OsCYP85A1 driven by the cauliflower mosaic virus 35S promoter increased endogenous BR levels and significantly promoted growth and biomass production in three groups of transgenic Populus tomentosa lines. The plant height and stem diameter of the transgenic poplar plants were increased by 17.6% and 33.6%, respectively, in comparison with control plants. Simultaneously, we showed that expression of OsCYP85A1 enhanced xylem formation in transgenic poplar without affecting cell wall thickness or the composition of cellulose. Our findings suggest that OsCYP85A1 represents a potential target candidate gene for engineering fast-growing trees with improved wood production.

Synthesis of methylcellulose-polyvinyl alcohol composite, biopolymer film and thermostable enzymes from sugarcane bagasse

Agro-industrial wastes and by-products are the natural and abundant resources of biomaterials to obtain various value-added items such as biopolymer films, bio-composites and enzymes. This study presents a way to fractionate and to convert an agro-industrial residue, sugarcane bagasse (SB), into useful materials with potential applications. Initially cellulose was extracted from SB which was then converted into methylcellulose. The synthesized methylcellulose was characterized by scanning electron microscopy and FTIR. Biopolymer film was prepared by using methylcellulose, polyvinyl alcohol (PVA), glutaraldehyde, starch and glycerol. The biopolymer was characterized to exhibit 16.30 MPa tensile strength, 0.05 g/m² h of water vapor transmission rate, 366 % of water absorption to its original weight after 115 min of immersion, 59.08 % water solubility, 99.05 % moisture retention capability and 6.01 % of moisture absorption after 144 h. Furthermore, in vitro studies on absorption and dissolution of model drug by biopolymer showed 2.04 and 104.59 % of swelling ratio and equilibrium water content, respectively. Biocompatibility of the biopolymer was checked by using gelatin media and it was observed that swelling ratio was higher in initial 20 min of contact. The extracted hemicellulose and pectin from SB were fermented by a thermophilic bacterial strain, Neobacillus sedimentimangrovi UE25 that yielded 12.52 and 6.4 IU mL^-1 of xylanase and pectinase, respectively. These industrially important enzymes further augmented the utility of SB in this study. Therefore, this study emphasizes the possibility for industrial application of SB to form various products.

Extraction Optimization and Characterization of Cellulose Nanocrystals from Apricot Pomace

Apricot pomace (AP) is lignocellulosic agro-industrial waste that could be considered a good source for cellulose-based, value-added compounds. In this study, conditions for cellulose nanocrystals' (CNCs) extraction from apricot pomace (AP) were optimized using Response Surface Methodology (RSM) based on the extraction yield, and the resulting CNC was characterized using Fourier transform infrared (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), Transmittance Electron Microscopy (TEM), Thermogravimetric Analysis (TGA), and X-Ray Diffraction (XRD). The maximum CNC yield (34.56%) was obtained at a sulfuric acid concentration of 9.5 M within 60 min. FTIR analysis showed that noncellulosic components were gradually removed from the pomace. A morphological analysis of the nanocrystal was performed using SEM and TEM. CNCs were in the range of 5-100 µm in diameter and appeared as individual fibers. TGA analysis of the CNC sample revealed good thermal stability around 320°C. The crystalline index (%CI) of the CNC obtained from AP was determined to be 67.2%. In conclusion, this study demonstrated that AP could be considered a sustainable source for value-added compounds such as CNCs to contribute to a circular economy.

Exploration of Cucumber Waste as a Potential Biorefinery Feedstock

The exploration of cucumber waste as a potential biorefinery feedstock is reported. Initially, extractives (essential oils) were isolated from cucumber waste via vacuum microwave hydro-distillation (VMHD). The yield and quality of the extractive were compared with respect to traditional hydro-distillation (HD). The essential oils were obtained over a range of microwave power (500, 750, 1000 W) and vacuum pressures (100, 200, 300 mbar). The highest quality (0.49 wt %) was obtained at a microwave irradiation power of 500 W and a vacuum of 300 mbar. VMHD is much quicker and more energy-efficient than HD. Within the context of a zero-waste biorefinery, the extractive-free residues were the solid residues from two different extraction methods were compared and characterized by ATR-IR, 13C solid-state NMR spectroscopy, SEM, TGA, and CHN elemental analysis. The resultant residues are cellulosic-rich, and no significant changes were observed with VMHD and HD treatment. The results indicated that the utilization of these residues can provide an efficient, inexpensive, and environment-friendly platform for the production of cellulosic materials.

Physical and Spectroscopic Characterization of the Microcrystalline Cellulose Derivatives from Corn Cob and Daniella Oliveri Wastes

Cellulose was extracted from wood dust waste samples of Daniella oliveri and corn cobs by acetic acid and alkaline pretreatment methods, while microcrystalline cellulose (MCC) derivative was produced by acid hydrolysis in 2 M HCl. The samples were tested for pH, moisture content, swelling capacities and ash contents. The data obtained were compared with those of commercial MCCs found in the literature. The functional groups in the microcrystalline cellulose derivatives was confirmed by the Fourier transform infrared (FTIR) spectroscopic method with characteristic absorption bands of;–OH stretching at 3416 cm-1; C-H stretching at 2918 cm-1; -OH bending at 1377 cm-1; 1159 cm-1; and C-O-C pyranose ring skeletal vibrations at 1026-1033 cm-1. The crystallinity absorption bands appeared at 1436 and 850 cm-1. The characteristic morphological features were established by scanning electron microscopy (SEM). Furthermore, the crystallinity of the microcrystalline cellulose was further confirmed using the X-ray powder diffraction (X-RD) technique, which showed three main reflections at 2θ=14.70°, 22.09°, and 34.24°.These results supported that microcrystalline cellulose derivative as cellulose I type and the acid pretreatment did not affect the structure of the MCC. The crystallinity indices were 69.3 and 73.2%, respectively. Daniella Oliveri and corn cob microcrystalline cellulose are, therefore, potential materials for further processing.

Proposed protocol for rate-limiting step determination during anaerobic digestion of complex substrates

Anaerobic digestion is a complex process, involving various microorganism groups and, consequently, several reactions. An easy-to-use protocol for the rate-limiting step determination of the process is proposed. The hydrogen production, acetate production, and acetate consumption rates can be calculated, according to a structured algorithm. During the rate limiting step determination, several compounds (biopolymer and monomer representatives, as well as sodium acetate) were used, combined or not with the substrate, to draw the corresponding conclusions. Three substrates were tested, characterized by specific organic compound groups (carbohydrates, proteins, and fats). All three substrates followed the acetate-consuming pathway for the organic matter conversion to methane. In this study, the rate-limiting step for the pathway of acetate consumption was acetate production. Determining the rate-limiting step through the proposed protocol can point to the appropriate actions needed to boost methane production, like substrate pretreatment, using an acidogenic reactor, or checking for the presence of inhibitors.

Fumaric acid: fermentative production, applications and future perspectives

The rising prices of petroleum-based chemicals and the growing apprehension about food safety and dairy supplements have reignited interest in fermentation process to produce fumaric acid. This article reviews the main issues associated with industrial production of fumaric acid. Different approaches such as strain modulation, morphological control, selection of substrate and fermentative separation have been addressed and discussed followed by their potential towards production of fumaric acid at industrial scale is highlighted. The employment of biodegradable wastes as substrates for the microorganisms involved in fumaric acid synthesis has opened an economic and green route for production of the later on a commercial scale. Additionally, the commercial potential and technological approaches to the augmented fumaric acid derivatives have been discussed. Conclusion of the current review reveals future possibilities for microbial fumaric acid synthesis.

Source of Nanocellulose and Its Application in Nanocomposite Packaging Material: A Review

Food packaging nowadays is not only essential to preserve food from being contaminated and damaged, but also to comply with science develop and technology advances. New functional packaging materials with degradable features will become a hot spot in the future. By far, plastic is the most common packaging material, but plastic waste has caused immeasurable damage to the environment. Cellulose known as a kind of material with large output, wide range sources, and biodegradable features has gotten more and more attention. Cellulose-based materials possess better degradability compared with traditional packaging materials. With such advantages above, cellulose was gradually introduced into packaging field. It is vital to make packaging materials achieve protection, storage, transportation, market, and other functions in the circulation process. In addition, it satisfied the practical value such as convenient sale and environmental protection, reduced cost and maximized sales profit. This review introduces the cellulose resource and its application in composite packaging materials, antibacterial active packaging materials, and intelligent packaging materials. Subsequently, sustainable packaging and its improvement for packaging applications were introduced. Finally, the future challenges and possible solution were provided for future development of cellulose-based composite packaging materials.

Chemical Composition Assessment of Structural Parts (Seeds, Peel, Pulp) of Physalis alkekengi L. Fruits

In recent years there has been an extensive search for nature-based products with functional potential. All structural parts of Physalis alkekengi (bladder cherry), including fruits, pulp, and less-explored parts, such as seeds and peel, can be considered sources of functional macro- and micronutrients, bioactive compounds, such as vitamins, minerals, polyphenols, and polyunsaturated fatty acids, and dietetic fiber. The chemical composition of all fruit structural parts (seeds, peel, and pulp) of two phenotypes of P. alkekengi were studied. The seeds were found to be a rich source of oil, yielding 14–17%, with abundant amounts of unsaturated fatty acids (over 88%) and tocopherols, or vitamin E (up to 5378 mg/kg dw; dry weight). The predominant fatty acid in the seed oils was linoleic acid, followed by oleic acid. The seeds contained most of the fruit’s protein (16–19% dw) and fiber (6–8% dw). The peel oil differed significantly from the seed oil in fatty acid and tocopherol composition. Seed cakes, the waste after oil extraction, contained arginine and aspartic acid as the main amino acids; valine, phenylalanine, threonine, and isoleucine were present in slightly higher amounts than the other essential amino acids. They were also rich in key minerals, such as K, Mg, Fe, and Zn. From the peel and pulp fractions were extracted fruit concretes, aromatic products with specific fragrance profiles, of which volatile compositions (GC-MS) were identified. The major volatiles in peel and pulp concretes were β-linalool, α-pinene, and γ-terpinene. The results from the investigation substantiated the potential of all the studied fruit structures as new sources of bioactive compounds that could be used as prospective sources in human and animal nutrition, while the aroma-active compounds in the concretes supported the plant’s potential in perfumery and cosmetics.

Characterizations of Alpha-Cellulose and Microcrystalline Cellulose Isolated from Cocoa Pod Husk as a Potential Pharmaceutical Excipient

Cellulose is a non-toxic, bio-degradable, and renewable biopolymer which is abundantly available in nature. The most common source of commercial microcrystalline cellulose is fibrous wood pulp. Cellulose and its derivatives have found wide commercial applications in the pharmaceutical, cosmetic, food, paper, textile, and engineering industries. This study aims to isolate and characterize cellulose forms from cocoa pod husk (CPH) and to assess its mechanical and disintegration properties as a direct compression excipient in metronidazole tablets. Two isolated cellulose types (i.e., cocoa alpha-cellulose (CAC) and cocoa microcrystalline cellulose (C-MCC)) were compared with avicel (AV). CAC and C-MCC were characterized for their physicochemical properties using Scanning Electron Microscopy (SEM), FTIR spectroscopy, Differential Scanning Calorimetry (DSC), and X-Ray Powder Diffraction (XRD). Metronidazole tablets were produced by direct compression with cellulose. The mechanical and disintegration properties of the tablets were evaluated. CAC and C-MCC yield was 42.3% w/w and 38.25% w/w, respectively. Particle diameters were significantly different with CAC (282.22 μm) > C-MCC (161.32 μm) > AV (72.51 μm). CAC and C-MCC had a better flow than AV. SEM revealed the fibrous nature of the cellulose. FTIR and XRD analysis confirmed the presence of cellulose with crystallinity index of 69.26%, 43.83%, and 26.32% for AV, C-MCC, and CAC, respectively. C-MCC and AV are more crystalline and thermally stable at high temperatures compared to CAC. The mechanical and disintegration properties of C-MCC and AV tablets complied with pharmacopeia specifications. Taken together, C-MCC isolated from CPH displayed some fundamental characteristics suitable for use as a pharmaceutical excipient and displayed better properties compared to that of AV.

Raman imaging: An indispensable technique to comprehend the functionalization of lignocellulosic material

With the increasing demands on sustainability in the material science and engineering landscape, the use of wood, a renewable and biodegradable material, for new material development has drawn increasing attentions in the materials science community. To promote the development of new wood-based materials, it is critical to understanding not only wood's hierarchical structure from molecule to macroscale level, but also the interactions of wood with other materials and chemicals upon modification and functionalization. In this review, we discuss the recent advances in the Raman imaging technique, a new approach that combines spectroscopy and microscopy, in wood characterization and structural evolution monitoring during functionalization. We introduce the principles of Raman spectroscopy and common Raman instrumentations. We survey the use of traditional Raman spectroscopy for lignocellulosic material characterizations including cellulose crystallinity determination, holocellulose discrimination, and lignin substructure evaluation. We briefly review the recent studies on wood property enhancement and functional wood-based material development through wood modification including thermal treatment, acetylation, furfurylation, methacrylation, delignification. Subsequently, we highlight the use of the Raman imaging for visualization, spatial and temporal distribution of wood cell wall structure, as well as the microstructure evolution upon functionalization. Finally, we discuss the future prospects of the field.

Effect of oxalic acid and sulphuric acid hydrolysis on the preparation and properties of pineapple pomace derived cellulose nanofibers and nanopapers

Nanocellulose is the "green magnet" which attracts a wide spectrum of industries towards it due to its availability, biodegradability, and possible smart applications. For the first time, pineapple pomace was being explored as an economic precursor for cellulose nanofibers. Nanofiber isolation was accomplished using a chemo-mechanical method and solution casting was adopted for the development of nanopapers. Moreover, the study examines the structural, optical, crystalline, dimensional, and thermal features of nanofibers isolated using different acid hydrolysis (oxalic acid and sulphuric acid) methods. Fourier-transform infra-red spectroscopy, ¹³C solid-state nuclear magnetic resonance spectroscopy, and X-ray diffraction analysis indicated the presence of type I cellulose. The transmittance, crystallinity index, and thermal stability of PPNFS (sulphuric acid treated fiber) were greater than PPNFO (oxalic acid treated fiber). The transmission electron microscopy and dynamic light scattering analysis confirmed the nanodimension of PPNFO and PPNFS. While comparing the optical and mechanical properties of nanopapers, PPNFS outperforms PPNFO. The tensile strength of the prepared nanopapers (64 MPa (PPNFO) and 68 MPa (PPNFS)) was found to be high compared to similar works reported in the literature. The prepared nanopaper is proposed to be used for food packaging applications.

Microwave Assisted Synthesis of Antimicrobial Nano-Films from Water Hyacinth <i>(Eichhornia crassipes)</i> and Roselle <i>(Hibiscus sabdariffa</i>) Plant Extract

Cellulose based nanofilms have large applications in biomedical and related fields due to their antimicrobial properties. Their applicability depends upon purity of cellulose, composition, and structural properties of films. The nanofilms of cellulose extracted from Water Hyacinth (Eichhornia crassipes) and Roselle (Hibiscus Sabdariffa) plant possesses excellent properties for biomedical applications due to their biological origin and ZnO or other metal loading properties. Microwave assisted physical separation of cellulose provided excellent films formation properties and ZnO loading compared without any chemical traces. The presence of chemical impurities to affects structural, morphological properties and contact angle. It affects the biomedical applicability of cellulose based films. The microwave-based extraction was further assisted by use of polyethylene glycol with molecular weight 600, which increases the solubility and extractability of cellulose to 90 %. Formed films showed higher contact angle and hydrophobicity. This increased hydrophobicity of cellulosic nanofilms showed enhanced antimicrobial activities towards gram-negative and gram-positive bacteria by water hyacinth nanofilms. Thus, microwave-based synthesis of cellulose nanofilms resulted into enhanced microbial activities.

Investigation of ratio of carbon to hydrogen (C/H ratio) in agricultural plants for further estimation of their productivity of organically bound tritium

The carbon to hydrogen ratio (C/H ratio, w/w) in plants is a key factor in estimating the amount of hydrogen in the photosynthetic product. The amount of hydrogen calculated from photosynthetic model estimation associated with the C/H ratio is an essential parameter of the estimation model of productivity of organically bound tritium (OBT) by plants. To propose a sophisticated estimation model of OBT by agricultural plants, temporal changes in the C/H ratio of six plant species (Japanese radish, cabbage, orchard grass, paddy field rice, apple, and radish) during their cultivation were investigated for each plant part. The C/H ratio in the plants cultivated in the field and growth chamber generally exceeded 6, which is the value for the primary photosynthetic monosaccharides, such as glucose and fructose (both chemical formulae, C₆H₁₂O₆). In the vegetative parts (e.g. Japanese radish leaves, cabbage leaves and roots, rice leaves and roots, and radish leaves and fine roots) the C/H ratio fluctuated irregularly or remained constant within an approximate range of 6.6-7.3 during cultivation. The C/H ratio in enlarged organs (e.g. Japanese radish root, rice ear, apple fruit, and radish main root) decreased continuously, approaching 6. These results suggest that the C/H ratio can be generally set as approximately 6.9 except for enlarged organs, in which the ratio may change over time during cultivation, within an approximate range of 6-7.

The Influence of High-Intensity Ultrasonication on Properties of Cellulose Produced from the Hop Stems, the Byproduct of the Hop Cones Production

The goal of this work is to evaluate the hop stems, a byproduct of hop cones production, as a potential source of cellulose. Hop stems contain up to 29% of cellulose. The cellulose isolation was conducted through the thermochemical treatment. After high-speed blending, the cellulose was characterized by 67% of crystallinity degree obtained from X-ray diffraction and median diameter of 6.7 nm obtained from atomic force microscopy imaging. The high-intensity ultrasonication (HIUS) was applied to reach further disintegration of cellulose fibers. The longer HIUS treatment resulted in decrease in crystallinity degree even up to 60% and decrease in the fiber diameter up to 4 nm. The Fourier transform infrared spectroscopy (FTIR) spectra showed that HIUS treatment led to changes in intermolecular hydrogen bonds. The stability of cellulose dispersions versus length of HIUS treatment was monitored over 14 days with back dynamic light scattering and laser Doppler electrophoresis methods. Obtained results are evidence that the hop stems are a potential source of cellulose and that it is possible to obtain stable dispersions after HIUS treatment. This was the first time that the properties of hop cellulose have been described so extensively and in detail after the use of HIUS treatment.

Recycled Paper Sludge (RPS)-Derived Nanocellulose: Production, Detection and Water Treatment Application

Paper production and recycling result in large amounts of recycled paper sludge (RPS) that is currently being disposed of in very costly and unsustainable practices, raising the importance of developing green solutions for waste management. The use of nanocellulose (NC) as the next generation of materials has gained much attention due to its economic potential. However, there are substantial challenges in NC extraction, detection, and quantification methods. In this study, NC was produced from RPS as a means of converting waste into a resource. The process included a short, 30 min ozonation (21 mg O3/g RPS), which allowed a sufficient delignification and facilitated the following hydrolysis step. Among all tested durations, a 4-h hydrolysis with 64% w/w sulfuric acid resulted in the highest NC production. Fluorescent staining by calcofluor white was used for simple and low-cost detection of NC in-situ. Crude NC showed a significant 63% dye uptake of 0.1 ppm acid red 131 within 30 min. Compared to the standard disposal methods of RPS, its utilization for NC production supports the circular economy concept and significantly contributes to the development of cellulose bio-based nanomaterials for water treatment applications.

A Review on Biodegradable Packaging Films from Vegetative and Food Waste

Plastics around the globe have been a matter of grave concern due to the unavoidable habits of human mankind. Taking waste statistics in India for the year 2019-20 into account, the data of 60 major cities show that the generation of plastic waste stands tall at around 26,000 tonnes/day, of which only about 60 % is recycled. A majority of the non-recycled plastic waste is petrochemical-based packaging materials that are non-biodegradable in nature. Vegetative/food waste is another global issue, evidenced by vastly populated countries such as China and India accounting for 91 and 69 tonnes of food wastage, respectively in 2019. The mitigation of plastic packaging issues has led to key scientific developments, one of which is biodegradable materials. However, there is a way that these two waste-related issues can be fronted as the analogy of "taking two shots with the same arrow". The presence of various bio-compounds such as proteins, cellulose, starch, lipids, and waxes, etc., in food and vegetative waste, creates an opportunity for the development of biodegradable packaging films. Although these flexible packaging films have limitations in terms of mechanical, permeation, and moisture absorption characteristics, they can be fine-tuned in order to convert the biobased raw material into a realizable packaging product. These strategies could work in replacing petrochemical-based non-biodegradable packaging plastics which are used in enormous quantities for various household and commercial packaging applications to combat the ever-increasing pollution in highly populated countries. This paper presents a systematic review based on modern scientific tools of the literature available with a major emphasis on the past decade and aims to serve as a standard resource for the development of biodegradable packaging films from food/vegetative waste.

Polysaccharides in Agro-Industrial Biomass Residues

The large-scale industrial use of polysaccharides to obtain energy is one of the most discussed subjects in science. However, modern concepts of biorefinery have promoted the diversification of the use of these polymers in several bioproducts incorporating concepts of sustainability and the circular economy. This work summarizes the major sources of agro-industrial residues, physico-chemical properties, and recent application trends of cellulose, chitin, hyaluronic acid, inulin, and pectin. These macromolecules were selected due to their industrial importance and valuable functional and biological applications that have aroused market interests, such as for the production of medicines, cosmetics, and sustainable packaging. Estimations of global industrial residue production based on major crop data from the United States Department of Agriculture were performed for cellulose content from maize, rice, and wheat, showing that these residues may contain up to 18%, 44%, and 35% of cellulose and 45%, 22%, and 22% of hemicellulose, respectively. The United States (~32%), China (~20%), and the European Union (~18%) are the main countries producing cellulose and hemicellulose-rich residues from maize, rice, and wheat crops, respectively. Pectin and inulin are commonly obtained from fruit (~30%) and vegetable (~28%) residues, while chitin and hyaluronic acid are primarily found in animal waste, e.g., seafood (~3%) and poultry (~4%).

Lignocellulosic composition based thermal kinetic study of Mangiferaindica Lam, Artocarpus Heterophyllus Lam and Syzygium Jambolana seeds

In the present study, pyrolysis of mangifera indica L., Artocarpus heterophyllus L. and jambolana seeds have been performed using thermogravimetric analysis. These biomasses have enriched lignocellulosic composition of hemicellulose (5-10%) and lignin (1-3%) which are unexplored. The TGA analysis was performed at various heating rates of 10, 15, 20, 25 and 30 °C/min from 25 to 600 °C. Kinetic investigation of the pyrolysis method using TGA statistics has been done using iso-conversional models of Flynn-Wall-Ozawa, Kissinger-Akahira-Sunose, Vyazovkin and Vyazovkin AIC. The apparent activation energies value ranged from 179.86 to 226.31 kJ/mol in the fractional conversion range of 0.1 to 0.7.

Thermoplastic starch nanocomposites using cellulose-rich Chrysopogon zizanioides nanofibers

Green thermoplastic starch (TPS) nanocomposite films aided by cellulose nanofibers (CNFs) from Chrysopogon zizanioides roots were developed and characterized. When compared to other lignocellulosic fibers, Chrysopogon zizanioides roots revealed exceptionally high cellulose content (~48%). CNFs were separated using an environmentally friendly acid isolation technique that included three stages: (i) alkali treatment; (ii) bleaching; and (iii) mild acid hydrolysis using oxalic acid in an autoclave. Following that, green nanocomposite films were made from potato starch using the solution casting process, by which we used glycerol (30 wt%) to make thermoplastic starch. Then, cellulose nanofibers in different concentrations (0, 1, 2, 3, 4 wt%) were added to the thermoplastic starch matrix. The isolated CNFs had diameters in the range of 17-27 nm. Besides, these nanostructures presented a very high crystallinity index (~65%), thereby enhanced the thermal stability. TPS/CNF green nanocomposites containing 3 wt% CNFs had exceptional tensile strength (~161%), tensile modulus (~167%), thermal stability, and crystallinity. As a result, nanocomposite films made of starch and cellulose nanofibers (3 wt%) extracted from Chrysopogon zizanioides roots would be alternatives for sustainable packaging. It can be concluded that Chrysopogon zizanioides roots have high potential for polymer industry.

Micro- and nanocelluloses from non-wood waste sources; processes and use in industrial applications

In addition to renewability and abundance, nanocellulose materials have tremendous (and variable) properties for different applications, ranging from bulk applications, such as paper and packaging reinforcement, to emerging high added-value applications, such as substrates for optoelectronics. Lignocellulosic biomass from agricultural and industrial waste sources is readily available and shows great promise as an inexpensive and sustainable raw material for nanocellulose production. However, the understanding of the potential of using non-wood based biowaste sources is not established and systematic comparisons of versatile agricultural and industrial waste sources can elucidate this complex topic. Here we present an overview of the most studied and most promising sources from agro-industrial waste, the processes to convert them into nanocellulose, some of the established and emerging applications, and discuss the advancements that are still needed for large-scale production. Sugarcane bagasse and oil palm empty fruit bunch have been the most researched waste-based sources for nanocellulose production and demonstrate the most promise due to availability and access. Industrial sources seem to have advantages over agricultural sources in collectability and ease of access. This work gives insight on the potential and the challenges of nanocellulose production from waste sources and discusses how the criteria set for nanocellulose materials in different applications can be met, thus opening new routes for circular economy.

Biomimetic cellulose-based superabsorbent hydrogels for treating obesity

In the treatment of obesity, nutritional and behavioral modifications are difficult to implement and maintain. Since vegetable consumption is a fundamental part of many dietary interventions and daily nutrient requirements, we developed a novel cellulose-based superabsorbent hydrogel (CB-SAH) platform, inspired by the composition and mechanical properties of raw vegetables, as a mechanobiological therapy. The CB-SAHs properties were studied in a simulated gastrointestinal environment, while their impact on gut tissue was investigated by an ex vivo organ culture (EVOC) model. Functional fibers and raw vegetables were used as reference. CB-SAHs demonstrated orders of magnitude higher elasticity in comparison to the tested functional fibers, however performed similar to the tested raw vegetables. Notably, the biomimetic CB-SAHs with elasticity levels similar to raw vegetables showed benefits in preserving and regulating the gut tissue in the EVOC model. Non-systemic oral mechanotherapeutics based on this technology were advanced through clinical studies, with a first product cleared as an aid for weight management in the US and Europe.

Bio Discarded from Waste to Resource

The modern linear agricultural production system allows the production of large quantities of food for an ever-growing population. However, it leads to large quantities of agricultural waste either being disposed of or treated for the purpose of reintroduction into the production chain with a new use. Various approaches in food waste management were explored to achieve social benefits and applications. The extraction of natural bioactive molecules (such as fibers and antioxidants) through innovative technologies represents a means of obtaining value-added products and an excellent measure to reduce the environmental impact. Cosmetic, pharmaceutical, and nutraceutical industries can use natural bioactive molecules as supplements and the food industry as feed and food additives. The bioactivities of phytochemicals contained in biowaste, their potential economic impact, and analytical procedures that allow their recovery are summarized in this study. Our results showed that although the recovery of bioactive molecules represents a sustainable means of achieving both waste reduction and resource utilization, further research is needed to optimize the valuable process for industrial-scale recovery.