Optimization of Hydrolysis-Acidogenesis Phase of Swine Manure for Biogas Production Using Two-Stage Anaerobic Fermentation

Carbon flow, energy metabolic intensity and metagenomic characteristics of a Fe (III)-enhanced anerobic digestion system during treating swine wastewater

Deep treatment and bioenergy recovery of swine wastewater (SW) are beneficial for constructing a low-carbon footprint and resource-recycling society. In this study, Fe (III) addition from 0 to 600 mg/L significantly increased the methane (CH4) content of the recovered biogas from 61.4 ± 2.0 to 89.3 ± 2.0 % during SW treatment in an anaerobic membrane digestion system. The specific methane yields (SMY) also increased significantly from 0.20 ± 0.05 to 0.29 ± 0.02 L/g COD. Fe (III) and its bio-transformed products which participated in establishing direct interspecific electron transfer (DIET), upregulated the abundance of e-pili and Nicotinamide adenine dinucleotide (NADH), enriched electroactive bacteria. The increase in cellular adenosine triphosphate (cATP) from 6583 to 14,518 ng/gVSS and electron transport system (ETS) from 1468 to 1968 mg/(g·h) promoted the intensity of energy flow and electron flow during anaerobic digestion of SW. Moreover, Fe (III) promoted the hydrolysis and acidification of organic matters, and strengthened the acetoacetic methanogenesis pathway. This study established an approach for harvesting high quality bioenergy from SW and revealed the effects and mechanisms from the view of carbon flow, energy metabolic intensity and metagenomics.

Response surface methodology for process optimization in livestock wastewater treatment: A review

With increasing demand for meat and dairy products, the volume of wastewater generated from the livestock industry has become a significant environmental concern. The treatment of livestock wastewater (LWW) is a challenging process that involves removing nutrients, organic matter, pathogens, and other pollutants from livestock manure and urine. In response to this challenge, researchers have developed and investigated different biological, physical, and chemical treatment technologies that perform better upon optimization. Optimization of LWW handling processes can help improve the efficacy and sustainability of treatment systems as well as minimize environmental impacts and associated costs. Response surface methodology (RSM) as an optimization approach can effectively optimize operational parameters that affect process performance. This review article summarizes the main steps of RSM, recent applications of RSM in LWW treatment, highlights the advantages and limitations of this technique, and provides recommendations for future research and practice, including its cost-effectiveness, accuracy, and ability to improve treatment efficiency.

Progress and challenges in valorisation of biomass waste from ornamental trees pruning through pyrolysis processes. Prospects in the bioenergy sector

Nowadays, the scarcity of energy resources is promoting the search for alternative energy sources, boosting interest in the use of forest lignocellulosic residue in the energy sector. In this study, the focus is on the energy recovery from two lignocellulosic residues originated during the pruning of ornamental trees (Horse Chestnut, CI, and False Acacia, FA). Both conventional and flash pyrolysis techniques were applied. The experimental pyrolysis variables were obtained from the study of the thermal behaviour of the pruning residues in thermogravimetric analysis. It was carried out under 5 heating rates and kinetic parameters were estimated using Flynn-Wall-Ozawa method. Results denoted higher maximum mass loss rate values for the same release temperature regions under FA experiments. Also, FA samples had lower final residues for the processes. However, activation energy values were so close for both species. FA was also linked to the faster reactions according frequency factor outcomes. Conventional pyrolysis of pruning residues was carried out in a horizontal oven of original design at a heating rate of 25 °C/min, at 750 °C and 60 min of permanence at that temperature; flash pyrolysis was tested in that oven at 750 and 850 °C. In these pyrolysis processes, three fractions were obtained: bio-char, bio-oil and gas. The physicochemical attributes of the bio-chars suggested their potential utility as biofuels (28.4-29.8 MJ/kg), adsorbent precursors or soil additives. Conventional pyrolysis bio-oils had a dominant monoaromatic hydrocarbons nature, with phenols being the most abundant (≥60%), while flash bio-oils contain mainly polycyclic aromatic hydrocarbons. Conventional pyrolysis gases contained up to 60 vol% of CO2; flash pyrolysis gases had high combustible gas content (CO, CH4, H2) and a low CO2 content (<25 vol%). As a result, their calorific value (18.06 MJ/kg) exhibited a threefold increase compared to the gas produced through conventional pyrolysis (6.04 MJ/kg).

Two-Stage and One-Stage Anaerobic Co-digestion of Vinasse and Spent Brewer Yeast Cells for Biohydrogen and Methane Production

This study aimed to evaluate the two-stage and one-stage anaerobic co-digestion of vinasse and spent brewer yeast cells (SBY) for biohydrogen and methane production. Optimization of the vinasse-to-SBY ratio and fly ash concentration of the two-stage and one-stage production processes was investigated. In the two-stage process, the vinasse-to-SBY ratio and fly ash concentration were optimized, and the leftover effluent was used for methane production. The optimum conditions for biohydrogen production were a vinasse-to-SBY ratio of 7:3% v/w and fly ash concentration of 0.4% w/v, in which the maximum hydrogen yield was 43.7 ml-H2/g-VSadded. In contrast, a vinasse-to-SBY ratio of 10:0% v/w and fly ash concentration of 0.2% w/v were considered optimal for methane production, and resulted in a maximum methane yield of 214.6 ml-CH4/g-VSadded. For the one-stage process, a vinasse-to-SBY ratio of 10:0% v/w and fly ash concentration of 0.1% w/v were considered optimal, and resulted in a maximum methane yield of 243.6 ml-CH4/g-VSadded. In the two-stage process, the energy yield from hydrogen (0.05-0.47 kJ/g-VSadded) was 0.62%-11.78%, and the major fraction was approximately 88.22%-99.38% gain from methane (3.19-7.73 kJ/g-VSadded). For the one-stage process, the total energy yield distribution ranged from 4.20 to 8.77 kJ/g-VSadded.

Highly selective butanol production by manipulating electron flow via cathodic electro-fermentation

Butanol production by solventogenic Clostridia shows great potential to combat the energy crisis, but is still challenged by low butanol selectivity and high downstream cost. In this study, a novel cathodic electro-fermentation (CEF) system mediated by methyl viologen (MV) was proposed and sequentially optimized to obtain highly selective butanol production. Under the optimal conditions (-0.60 V cathode potential, 0.50 mM MV, 30 g/L glucose), 7.17 ± 0.55 g/L butanol production were achieved with the yield of 0.32 ± 0.02 g/g. With the supplement of 4 g/L butyric acid as co-substrate, butanol production further improved to 13.14 ± 1.14 g/L with butanol yield and selectivity as high as 0.43 ± 0.01 g/g and 90.44 ± 1.66%, respectively. The polarized electrode enabled the unbalanced fermentation towards butanol formation and MV further inhibited hydrogen production, both of which contributed to the high-level butanol production and selectivity. The MV-mediated CEF system is a promising approach for cost-effective bio-butanol production.

Supplementation of CO2-nanobubble water to enhance the methane production from anaerobic digestion of corn straw

Nanobubble water (NBW) could improve methane production from anaerobic digestion (AD) of corn straw without secondary contamination. In this study, the effect of carbon dioxide nanobubble water (CO₂-NBW) volumes (0%, 25%, 50%, 75%, 100%) on methane production from corn straw was investigated. The results showed that addition of CO₂-NBW could improve methane production and promote substrate degradation in AD process. The highest cumulative methane production of 132.16 mL g^-1VS_added was obtained in the 100% CO₂-NBW added reactor, which was 17% higher than that in the control group. Additionally, the addition of CO₂-NBW could mitigate the sharp decrease in pH by acting as a buffer. CO₂-NBW could also enhance microorganism activity throughout the AD process. The electron transport system (ETS) activity was increased by 23%, while the β-glucosidase, dehydrogenase (DHA), and coenzyme F₄₂₀ activities were increased by 15%, 23%, and 11%, respectively, at optimum addition of CO₂-NBW. Meanwhile, addition of CO₂-NBW accelerated the production and consumption of reducing sugar and volatile fatty acids (VFAs), promoting the reduction rates of TS (Total solid) and VS (Volatile solid).

The liquid-liquid extractive fermentation of L-lactic acid in a novel semi-partition bioreactor (SPB)

Fermentation technology is commonly used as a mature process to produce numerous products with the help of micro-organisms. However, these organisms are sometimes inhibited by the accumulation of these products or their by-products. One route to circumvent this is via extractive fermentation, which combines the fermentation process with extraction. To facilitate this, novel bioreactor designs are required, such as the semi-partition bioreactor (SPB) which has been recently proposed for in-situ extractive fermentation. The latter combines a fermentation and an extraction unit into a single vessel using a mixer-settler principle. Where the bioproduct is produced in the mixer and removed continuous in the settler. As the SPB functionality is a subject of interest, this study builds on demonstrating different process conditions in the production of a sample bioprocess (lactic acid (LA)) which is susceptible to product inhibition. The results showed a 34.5 g/L LA concentration was obtained in the pH-controlled condition. While LA production can suffer from product inhibition, neutralizing agents can be easily used to curb inhibitory problems, however, the LA fermentation is a simple (and well-studied) example, which can demonstrate an alternative route to avoiding product inhibition (for systems which cannot be rescued using pH control). Hence, to replicate a scenario of product inhibition, two different process conditions were investigated, no pH control with no extraction (non-integrated), and no pH control with integrated extractive fermentation. Key findings showed higher LA concentration in integrated (25.10 g/L) as compared to the non-integrated (14.94 g/L) case with improved yield (0.75 gg^-1 (integrated) versus 0.60 gg^-1 (non-integrated)) and overall productivity (0.35 gL^-1h^-1(integrated) versus 0.20 gL^-1h^-1(non-integrated)) likewise. This is the first demonstration of an SP bioreactor, and shows how the reactor can be applied to improve productivity. Based on these results, the SPB design can be applied to produce any product liable to product inhibition.

Carbon-based photocatalysts for hydrogen production: A review

Future energy crises and environmental deterioration may only be avoided by converting solar energy into sustainable, safe, cost-effective, and environmentally friendly technologies such as water splitting. Many researchers and governments throughout the globe have stressed the imperative need for affordable, environmental benign, resistive to corrosion, and earth-abundant nanostructured photocatalysts. This has led scientists to look for a green and cost-effective way to generate energy. As a result, the significance of photo catalyst engineering and reactor design difficulties connected to the performance of the photocatalytic reactions, as well as the examination and analysis of photocatalyst behaviors for adaptable and cost effective H2 production, is emphasized and summarized. The carbon-based materials have an appealing band structure, strong chemical stability, is plentiful on Earth, and is relatively easy to produce, making them suitable for hydrogen production. As example, graphene oxide (GO) with the oxygenated functional groups and graphene and its counterparts, including Graphene quantum dots (GQDs), GO, reduce graphene oxide (rGO), have been demonstrated to be ideal nanocomposite materials due to their superior properties and distribution in matrix and CNTs with excellent electronic transmission efficiency, low cost, stability, and environmental friendly are a great alternative of electron mediators for photocatalytic devices to boost light absorptivity for efficient hydrogen generation but some of them have limited photocatalytic activity due to their low sunlight usage efficiency, therefore the numerous methods, such as doping ions, constructing heterostructure, and functionalizing carbon-based materials, have recently been proven to promote the photocatalytic activity of them. The pore structure of carbon material functions as an acceptor of photogenerated electrons, improved the photocatalyst's specific surface area. Generally low-dimensional carbon materials demonstrated immense promise as highly efficient, low-cost, and environmentally friendly catalysts for hydrogen generation as an energy source. This article reviews the recent research progress on carbon-based materials for hydrogen evolution for the first time. It commences with a quick overview of the present state of affairs and fundamental concepts of hydrogen production in carbon-based nanomaterials for use in this field. We anticipate that this study will inspire readers to expand the use of carbon-based materials in H₂ generation in a more environmentally friendly way.

A novel conversion of marine macroalgal biomass to biofuel (biohydrogen) via calcium hypochlorite induced dispersion

Environmental pollution due to the consumption of non-renewable energy lead the search for alternative eco-friendly renewable fuel. The study details the biohydrogen production efficiency by potential macroalgal (Ulva reticulata) biomass improved by a disperser combined with calcium hypochlorite pretreatment technology. Calcium hypochlorite was added to decrease the surface energy of the medium induced by sole disperser pretreatment. Optimum condition for algal disperser treatment was 10,000 rpm with 30 min as dispersion time. The specific energy spent for the disintegration of the macroalgal biomass was 1231.58 kJ/kg TS. COD solubilization rate of 11.79% was attained with mechanical pretreatment whereas increased to 20.23% with combined pretreatment. Combination of disperser with calcium hypochlorite significantly reduced the specific energy input spent to 500 kJ/kg TS. The amount of organic materials such as carbohydrates, proteins and lipids released were 680 mg/L, 283 mg/L and 136 mg/L respectively. Thus, the combinative pretreatment with disperser rotor speed (10,000 rpm) for pretreatment time (12 min) and calcium hypochlorite dosage (0.1 g/g) derived as optimum condition for effective solubilization of macroalgal biomass. Biohydrogen production potential was maximum in the macroalgae pretreated with both disperser and calcium hypochlorite recorded highest yield (54.6 mL H₂/g COD) compared to the macroalgae pretreated with disperser alone (31.7 mL H₂/g COD) and untreated macroalgae (11.5 mL H₂/g COD).

Valorization of agriculture waste biomass as biochar: As first-rate biosorbent for remediation of contaminated soil

Each year, Asia produces an estimated 350 million tonnes of agricultural residues. According to Ministry of Power projections, numerous tonnes of such waste are discarded each year, in addition to being used as green manure. The methodology used to convert agricultural waste into the most valuable biochar, as well as its critical physical and chemical properties, were described in this review. This review also investigates the beneficial effects of bio and phytoremediation on metal(lloid)-contaminated soil. Agriculture biomass-based biochar is an intriguing organic residue material with the potential to be used as a responsible solution for metal(lloid) polluted soil remediation and soil improvement. Plants with faster growth and higher biomass can meet massive remediation demands. Recent research shows significant progress in agricultural biomass-based biomass conversion as biochar, as well as understanding the frameworks of metal(lloid) accumulation and mobility in plants used for metal(lloid) polluted soil remediation. Biochar made from various agricultural biomass can promote native plant growth and improve phytoremediation efficiency in polluted soil with metal(lloid)s. This carbon-enriched biochar promotes native microbial activity by neutralising pH and providing adequate nutrition. Thus, this review critically examines the feasibility of converting agricultural waste biomass into biochar, as well as the impact on plant and microbe remediation potential in metal(lloid)s polluted soil.

Thermophilic biohydrogen production strategy using agro industrial wastes: Current update, challenges, and sustainable solutions

Continuously increasing wastes management issues and the high demand of fuels to fulfill the current societal requirements is not satisfactory. In addition, severe environmental pollution caused by generated wastes and the massive consumption of fossil fuels are the main causes of global warming. In this scenario, production of hydrogen from organic wastes is a potential and one of the most feasible alternatives to resolve these issues. However, sensitivity of H₂ production at higher temperature and lack of potential substrates are the main issues which are strongly associated with such kinds of biofuels. Therefore, the present review is targeted towards the evaluation and enhancement of thermophilic biohydrogen production using organic, cellulosic wastes as promising bioresources. This review discusses about the current status, development in the area of thermophilic biohydrogen production wherein organic wastes as key substrate are being employed. The combinations of suitable organic and cellulose rich substrates, thermo-tolerant microbes, high enzymes stability may support to enhance the biohydrogen production, significantly. Further, various factors which may significantly contribute to enhance biohydrogen production have been discussed thoroughly in reference to the thermophilic biohydrogen production technology. Additionally, existing obstacles such as unfavorable thermophilic biohydrogen pathways, inefficiency of thermophilic microbiomes, genetic modifications, enzymes stability have been discussed in context to the possible limitations of thermophilic biohydrogen production strategy. Structural and functional microbiome analysis, fermentation pathway modifications via genetic engineering and the application of nanotechnology to enhance the thermophilic biohydrogen production have been discussed as the future prospective.

Sustainability and carbon neutralization trends in microalgae bioenergy production from wastewater treatment: A review

Reducing CO2 emissions using biomass is gaining popularity as an environmentally friendly strategy. Due to high growth rates, low production costs, and ability to withstand harsh conditions, microalgae have become quite popular. Microalgae may also undertake photosynthesis, converting CO2 and solar energy into sugar before becoming biomass, making them an excellent source of renewable and promising biofuels. CO2 sequestration and biofixation was utilized to compare the synthesis of biodiesel as a third-generation biofuel from various types of wastewater was also used as a source for the algal cultivation. This review article focuses on recent developments, research discoveries in the field of microalgal CO2 capture modification and the optimization of conversion efficiency. This review is intended to serve as a helpful and reference for the use of wastewater treatment with microalgae to collect CO2. The overarching objective of this study is to assist wastewater treatment systems in achieving carbon neutrality.

Integrated biorefinery approaches for the industrialization of cellulosic ethanol fuel

Lignocellulosic biomass is an abundant and sustainable raw material, but its conversion into ethanol fuel has not yet achieved large-scale industrialization and economic benefits. Integrated biorefineries have been widely identified as the key to achieving this goal. Here, four promising routes were summarized to assemble the new industrial plants for cellulose-based fuels and chemicals, including 1) integration of cellulase production systems into current cellulosic ethanol processes; 2) combination of processes and facilities between cellulosic ethanol and first-generation ethanol; 3) application of enzyme-free saccharification processes and computational approaches to increase the bioethanol yield and optimize the integration process; 4) production of multiple products to maximize the value derived from the lignocellulosic biomass. Finally, the remaining challenges and perspectives of this field are also discussed.

Bioremediation of sulfonamides by a microalgae-bacteria consortium - Analysis of pollutants removal efficiency, cellular composition, and bacterial community

Antibiotics in wastewaters (e.g., sulfonamides (SAs)) are not effectively removed by the conventional bacterial processes. In this study, a microalgae (Scenedesmus obliquus)-based process was evaluated for the removal of SAs. The maximum removal efficiency of sulfadiazine (SDZ) and sulfamethoxazole (SMX) by the consortium was 5.85% and 40.84%, respectively. The lower SDZ biodegradation efficiency could be due to the difference in the lipophilic degree related to cell binding. The presence of SAs did not significantly inhibit the biomass production of the consortium (1311-1952 mg/L biomass) but led to a 36-51% decrease in total polysaccharide content and an increase in microalgae's protein content, which caused granule formation. The presence of SMX and SDZ resulted in an increase in lipid peroxidation activity with a 6.2 and 23.5-fold increase in malondialdehyde content, respectively. Rhodobacter and Phreatobacter were abundant in the consortium with SAs' presence, while alinarimonas, Catalinimonas and Cecembia were seen in their absence.

A critical review on exploitation of agro-industrial biomass as substrates for the therapeutic microbial enzymes production and implemented protein purification techniques

Annually, a huge amount of waste is generated by the industries that use agricultural biomass. Researchers have looked into employing this cheap and renewable agro-biomass as a substrate for enzyme production via fermentation processes to meet the ever-increasing worldwide need. Although there are a number of sources for enzyme extraction, microbial sources have dominated industrial sectors due to their easy availability and rapid growth. Microbial enzymes are currently used in a variety of industries, including pharmaceuticals, food, biofuels, textiles, paper, detergents, and so on, and using these nutritious feedstocks not only reduces production costs but also helps to reduce environmental concerns. The present review focuses on the therapeutic microbial enzymes produced using different agro-industrial biomass as raw materials, with down-streaming techniques for obtaining a final pure product. Additionally, the article also discussed biomass pretreatment processes, including physical, chemical and biological. The type of pretreatment method to be used is mostly governed by the intended use of the major molecular components of biomass (cellulose, hemicelluloses and lignin). Finally, purification challenges are included. All of this information will be useful in the industrial synthesis of high-purity targeted enzymes if the crucial aspects that have been discussed are taken into account.

Fusion of a proline-rich oligopeptide to the C-terminus of a ruminal xylanase improves catalytic efficiency

Xylanases are widely used in the degradation of lignocellulose and are important industrial enzymes. Therefore, increasing the catalytic activity of xylanases can improve their efficiency and performance. In this study, we introduced the C-terminal proline-rich oligopeptide of the rumen-derived XynA into XylR, a GH10 family xylanase. The optimum temperature and pH of the fused enzyme (XylR-Fu) were consistent with those of XylR; however, its catalytic efficiency was 2.48-fold higher than that of XylR. Although the proline-rich oligopeptide did not change the enzyme hydrolysis mode, the amount of oligosaccharides released from beechwood xylan by XylR-Fu was 17% higher than that released by XylR. This increase may be due to the abundance of proline in the oligopeptide, which plays an important role in substrate binding. Furthermore, circular dichroism analysis indicated that the proline-rich oligopeptide might increase the rigidity of the overall structure, thereby enhancing the affinity to the substrate and catalytic activity of the enzyme. Our study shows that the proline-rich oligopeptide enhances the catalytic efficiency of GH10 xylanases and provides a better understanding of the C-terminal oligopeptide-function relationships. This knowledge can guide the rational design of GH10 xylanases to improve their catalytic activity and provides clues for further applications of xylanases in industry.

Microbiological insights into anaerobic digestion for biogas, hydrogen or volatile fatty acids (VFAs): a review

In the past decades, considerable attention has been directed toward anaerobic digestion (AD), which is an effective biological process for converting diverse organic wastes into biogas, volatile fatty acids (VFAs), biohydrogen, etc. The microbial bioprocessing takes part during AD is of substantial significance, and one of the crucial approaches for the deep and adequate understanding and manipulating it toward different products is process microbiology. Due to highly complexity of AD microbiome, it is critically important to study the involved microorganisms in AD. In recent years, in addition to traditional methods, novel molecular techniques and meta-omics approaches have been developed which provide accurate details about microbial communities involved AD. Better understanding of process microbiomes could guide us in identifying and controlling various factors in both improving the AD process and diverting metabolic pathway toward production of selective bio-products. This review covers various platforms of AD process that results in different final products from microbiological point of view. The review also highlights distinctive interactions occurring among microbial communities. Furthermore, assessment of these communities existing in the anaerobic digesters is discussed to provide more insights into their structure, dynamics, and metabolic pathways. Moreover, the important factors affecting microbial communities in each platform of AD are highlighted. Finally, the review provides some recent applications of AD for the production of novel bio-products and deals with challenges and future perspectives of AD.

Effectively Recycling Swine Wastewater by Coagulation–Flocculation of Nonionic Polyacrylamide

Recycling swine wastewater is an environmental and economic issue for promoting the sustainable development of the pig industry worldwide. The application of a flocculant, non-ionic polyacrylamide (NPAM) for treating the contaminants in wastewater was trialed in this study. Firstly, the optimal pH value for the coagulation–flocculation of NPAM was adjusted by hydrochloric acid and sodium hydroxide. The viscosity of the flocculant solution was examined by a rotational viscometer and the morphology of the flocculant on the glass surface was examined by an optical microscope and an atomic force microscope. The result showed that a pH value of 11 or more was best for NPAM coagulation–flocculation. Subsequently, the swine wastewater from the anoxic reactor of a three-stage manure treatment system was adjusted by a pH adjuster, calcium hydroxide, followed by the coagulation–flocculation of NPAM. The quality of the final, treated water was examined by a regular wastewater analysis. The results showed that the removal rates for copper ions, zinc ions, NH4+–N, total phosphate (TP), and total nitrogen (TN) were 96.3%, 97.8%, 99.2%, 94.9%, and 99.1%, respectively. Our study concluded that this water recycling method combining the existing organic fertilizer production and power generation enhanced the recycling strategy for swine wastewater treatment and could further the sustainable development of the pig industry.

Performance indicators for the optimal BTE of biodiesels with additives through engine testing by the Taguchi approach

Biodiesel commercialization is questionable due to poor brake thermal efficiency. Biodiesel utilization should be improved with the addition of fuel additives. Hydrogen peroxide is a potential fuel additive due to extra hydrogen and oxygen content, which improves the combustion process. In this experimental study, biodiesel has been produced from Jatropha oil employing catalyzed transesterification homogeneously to examine its influence on the performance and emissions at engine loads with 1500 rpm utilizing a four-stroke single-cylinder diesel engine. D60B40 (having 60% diesel and 40% biodiesel) and D60B30A10 (60% diesel, 30% biodiesel and 10% hydrogen peroxide (H2O2)), are the fuel mixtures in the current study. The addition of H2O2 reduces emissions and enhances the combustion process. This effect occurred due to the micro-explosion of the injected fuel particles (which increases in-cylinder pressure and heat release rate (HRR)). An increase of 20% in BTE and 25% reduction in BSFC for D60B30A10 was observed compared to D60B40. Significant reduction in emissions of HC up to 17.54%, smoke by 24.6% CO2 by 3.53%, and an increase in NOx was noticed when the engine is operated with D60B30A10. The HRR increased up to 18.6%, ID reduced by 10.82%, and in-cylinder pressure increased by 8.5%. Test runs can be minimized as per Taguchi's design of experiments. It is possible to provide the estimates for the full factorial design of experiments. Exhaust gas temperature standards are evaluated and examined for all fuel blends.

Sustainability evaluation of microalgae biodiesel production process integrated with nutrient close-loop pathway based on emergy analysis method

To make comprehensive assessment on sustainability of microalgae biofuel production process integrated with nutrient close-loop pathways, Emergy Analysis methodology was adopted based on case studies: microalgae biodiesel production integrated with Nutrient Recycling Pathway in Case A and microalgae biodiesel production integrated with Protein Production as By-Product Pathway in Case B. Emergy results show that microalgae biodiesel system integrated with Nutrient Recycling Pathway is more sustainable, and factor analysis shows that water source with higher unit emergy value and electricity with lower one are more favorable to improve sustainability performance of the integrated process. Besides, different generations of biofuel are also assessed by Emergy Analysis method, and the third-generation biodiesel shows the most sustainable potentials than the previous.

Best Operating Conditions for Biogas Production in Some Simple Anaerobic Digestion Models

We consider one-step and two-step simple models of anaerobic digestion that are able to adequately capture the main dynamical behaviour of the full anaerobic digestion model ADM1. We do not consider specific growth functions. We only require them to satisfy certain qualitative assumptions. These assumptions are satisfied for concave growth functions, but they are also satisfied for a large class of growth functions found in many applications. We consider the maximisation of the biogas production with respect to the operating parameters of the model, which are the dilution rate and the substrate input concentration. We give the best operating conditions and we describe them as a subset of the set of operating parameters. Our models incorporate biomass decay terms, corresponding to maintenance. Numerical plots with specified growth functions and biological parameters illustrate the obtained results.

Effect of the Substrate to Inoculum Ratios on the Kinetics of Biogas Production during the Mesophilic Anaerobic Digestion of Food Waste

This study evaluates the effects of the varying substrate to inoculum ratios (S:I) of 0.5, 1, 2, 3, 4, 5, and 6 (volatile solids/VS basis) on the kinetics of biogas production during batch mesophilic (35 ± 1 °C) anaerobic digestion (AD) of simulated food waste (FW), using anaerobic digestate as the inoculum. Kinetic parameters during biogas production (scrubbed with NaOH solution) are predicted by the first-order and the modified Gompertz model. The observed average specific biogas yields are in descending order corresponding to the S:I ratios 1, 2, 4, 6, 3, 5, and 0.5, respectively, and the significant effect of the S:I ratio was observed. The tests with the S:I of 1 have the maximum average biogas production rates of 88.56 NmL/gVS.d, whereas tests with the S:I of 6 exhibited the lowest production rates (24.61 NmL/gVS.d). The maximum biogas yields, predicted by the first order and the modified Gompertz model, are 668.65 NmL/gVS (experimental 674.40 ± 29.10 NmL/gVS) and 653.17 NmL/gVS, respectively. The modified Gompertz model has been proven to be suitable in predicting biogas production from FW. VS removal efficiency is greater in higher S:I ratios, with a maximum of 78.80 % at the S:I ratio of 6, supported by the longer incubation time. Moreover, a significant effect of the S:I ratio is seen on kinetics and energy recovery from the AD of FW.

Recent advances of thermochemical conversion processes for biorefinery

Lignocellulosic biomass is one of the most promising renewable resources and can replace fossil fuels via various biorefinery processes. Through this study, we addressed and analyzed recent advances in the thermochemical conversion of various lignocellulosic biomasses. We summarized the operation conditions and results related to each thermochemical conversion processes such as pyrolysis (torrefaction), hydrothermal treatment, gasification and combustion. This review indicates that using thermochemical conversion processes in biorefineries is techno-economically feasible, easy, and effective compared with biological processes. The challenges experienced in thermochemical conversion processes are also presented in this study for better understanding the future of thermochemical conversion processes for biorefinery. With the aid of artificial intelligence and machine learning, we can reduce time-consumption and experimental work for bio-oil production and syngas production processes.

The biological and abiotic effects of powdered activated carbon on the anaerobic digestion performance of cornstalk

To comprehensively evaluate the biological and abiotic influence of powdered activated carbon (PAC) on the anaerobic digestion of cornstalk, mesophilic and thermophilic digestion were conducted. Adding PAC (10 g/L) under thermophilic system obtained the maximum cellulose degradation rate and methane yield (MY), which were 57.47% and 128.19 L/kg VS. However, adding same dose of PAC at mesophilic system decreased the MY by 8.16% while increased the cellulose degradation rate and methane production rate by 6.48% and 17.92%. Under mesophilic conditions, the enhancement of PAC was owing to the enrichment of cellulolytic microorganisms, improvement of the syntrophic process and direct interspecies electron transfer. The lower methane yield was attributed to the adsorption of carbon source by PAC and CH₄ consumption by Norank_c_Bathyarchaeia. The good performance of thermophilic system was owing to the lower adsorption capability of PAC, absence of Norank_c_Bathyarchaeia, and concentrated carbon flow to methane.

Biofuel production from Macroalgae: present scenario and future scope

The current fossil fuel reserves are not sufficient to meet the increasing demand and very soon will become exhausted. Pollution, global warming, and inflated oil prices have led the quest for renewable energy sources. Macroalgae (green, brown, and red marine seaweed) is gaining popularity as a viable and promising renewable source for biofuels production. Numerous researches have been conducted to access the potential of macroalgae for generating diverse bioproducts such as biofuels. The existence of components such as carbohydrates and lipids, and the lack or deficiency of lignin, create macroalgae an enviable feedstock for biofuels generation. This review briefly covers the potential macroalgal species promoting the production of biofuels and their cultivation methods. It also illustrates the biofuel generation pathway and its efficiency along with the recent techniques to accelerate the product yield. In addition, the current analysis focuses on a cost-effective sustainable generation of biofuel along with commercialization and scaleup.