Activated Carbon, Biochar and Charcoal: Linkages and Synergies across Pyrogenic Carbon’s ABCs

Plant-substrate biochar properties critical for mediating reductive debromination of 1,2-dibromoethane

Dibromoethane is a widespread, persistent organic pollutant. Biochars are known mediators of reductive dehalogenation by layered FeII-FeIII hydroxides (green rust), which can reduce 1,2-dibromoethane to innocuous bromide and ethylene. However, the critical characteristics that determine mediator functionality are lesser known. Fifteen biochar substrates were pyrolyzed at 600 °C and 800 °C, characterized by elemental analysis, X-ray photo spectrometry C and N surface speciation, X-ray powder diffraction, specific surface area analysis, and tested for mediation of reductive debromination of 1,2-dibromoethane by a green rust reductant under anoxic conditions. A statistical analysis was performed to determine the biochar properties, critical for debromination kinetics and total debromination extent. It was shown that selected plant based biochars can mediate debromination of 1,2-dibromoethane, that the highest first order rate constant was 0.082/hr, and the highest debromination extent was 27% in reactivity experiments with 0.1 µmol (20 µmol/L) 1,2-dibromoethane, ≈ 22 mmol/L FeIIGR, and 0.12 g/L soybean meal biochar (7 days). Contents of Ni, Zn, N, and P, and the relative contribution of quinone surface functional groups were significantly (p < 0.05) positively correlated with 1,2-dibromoethane debromination, while adsorption, specific surface area, and the relative contribution of pyridinic N oxide surface groups were significantly negatively correlated with debromination.

Machine learning-based prediction of adsorption capacity of metal-doped and undoped activated carbon: Assessing the role of metal doping

This research developed five ensemble-based machine learning (ML) models to predict the adsorption capacity of both pristine and metal-doped activated carbon (AC) and identified key influencing features. Results indicated that Extreme Gradient Boosting (XGB) model provided the most accurate predictions for both types of AC, with metal-doped AC exhibiting 1.7 times higher adsorption capacity than pristine AC showing 254.66 and 148.28 mg/g, respectively. Feature analysis using SHAP values revealed that adsorbent characteristics accounted for 53.5 % of the adsorption capacity in pristine AC, while experimental conditions were crucial for metal-doped AC (61.3%), with surface area and initial concentration being the most significant features, showing mean SHAP values of 0.317 and 0.117, respectively. Statistical comparisons of adsorbent characteristics between pristine and metal-doped AC showed that metal doping significantly altered surface area (p-value = 0.0014), pore volume (p-value = 0.0029), and elemental composition (C% (p-value = 3.9513∗10^-7) and O% (p-value = 0.0007)) of AC. Despite the reduction in surface area and consistent pore volume after metal doping, the enhanced adsorption capacity of metal-doped AC was attributed to increased oxygen content from 10.89% to 17.28 % as mean values. This suggests that oxygen-containing functional groups play a critical role in the improved adsorption capacity of metal-doped AC. This research lays the groundwork for optimizing AC adsorbents by identifying key factors in metal-doped AC and suggest further studies on the interaction between specific metal dopants and resulting functional groups to improve adsorption capacity and reduce repeated labor work.

Biochar Improves Yield by Reducing Saline-Alkaline Stress, Enhancing Filling Rate of Rice in Soda Saline-Alkaline Paddy Fields

Soda saline-alkaline stress significantly impedes the rice grain filling process and ultimately impacts rice yield. Biochar has been shown to mitigate the negative impacts of saline-alkaline stress on plants. However, the exact mechanism by which biochar influences the rice grain-filling rate in soda saline-alkaline soil is still not fully understood. A two-year field experiment was conducted with two nitrogen fertilizer levels (0 and 225 kg ha-1) and five biochar application rates [0% (B0), 0.5% (B1), 1.5% (B2), 3.0% (B3), and 4.5% (B4) biochar, w/w]. The results demonstrated that biochar had a significant impact on reducing the Na+ concentration and Na+/K+ ratio in rice grown in soda saline-alkaline lands, while also improving its stress physiological conditions. B1, B2, B3, and B4 showed a notable increase in the average grain-filling rate by 5.76%, 6.59%, 9.80%, and 10.79%, respectively, compared to B0; the time to reach the maximum grain-filling rate and the maximum grain weight saw increases ranging from 6.02% to 12.47% and from 7.85% to 14.68%, respectively. Meanwhile, biochar, particularly when used in conjunction with nitrogen fertilizer, notably enhanced the activities of sucrose synthase (SuSase), ADPG pyrophosphorylase (AGPase), starch synthase (StSase), and starch branching enzyme (SBE) of rice grains in soda saline-alkaline lands. Furthermore, rice yield increased by 11.95-42.74% in the B1, B2, B3, and B4 treatments compared to the B0 treatment. These findings showed that biochar improves yield by regulating ionic balance, physiological indicators, starch synthesis key enzyme activities, and the grain-filling rate in soda saline-alkaline paddy fields.

Biochar-mediated bioremediation: a sustainable strategy to increase Avena sativa L. tolerance to crude oil soil contamination

The present work investigated the effects of different doses of biochar (2.5%, 5%, 10%), a by-product of the pyrolysis of woody biomass, on the growth of oat plants (Avena sativa L., cv "Danko") grown under different crude oil concentrations (0.5%, 1%, 2%, 3%, 6%) added to the soil, evaluating both biometric (i.e. fresh weight) and biochemical (i.e., content of malondialdehyde and proline, and total antioxidant power) parameters. The findings indicate that biochar positively influences the fresh weight of oat plants across all concentrations of crude oil investigated. On the other hand, regarding oxidative stress, measured by malondialdehyde and proline content, biochar led to a significant reduction, with statistical significance observed at biochar concentrations > 2.5% and crude oil levels > 2% (malondialdehyde: ranging from -25% to -38%; proline ranging from -33% to -52%). Soil amendment with biochar increased the total antioxidant power, particularly at biochar concentrations > 2.5% and crude oil levels > 2% (ranging from + 20% to + 98%). These results suggest that biochar has a great potential in mitigating the negative effects of crude oil contamination on plant growth and oxidative stress levels, thereby highlighting its value as a conditioner in contaminated soils.

Strength and functionalized borage biochar for effective elimination of nickel contamination: Insight into batch and dynamic flow mode treatment applications

A silica gel-modified borage biochar (BB@Si) was first produced and used as a binding agent for potentially hazardous Ni2+ ions in aqueous systems. The recommended biochar was more effective in eliminating Ni2+ than pristine biochar (BB). Its maximum qm could reach up to 1.39 × 10-3 mol/g at 30 °C, and sorption isotherms showed that the Langmuir model could more accurately define its sorption behavior. The Dubinin-Radushkevich isotherm also revealed that the average sorption energy ranged from 11.00 to 11.14 kJ/mol. Zeta potential tests, SEM images, and FT-IR scans confirmed the interactions between BB@Si and Ni2+ ions. Dynamic flow treatment studies showed high uptake effectiveness when the flow rate and amount of BB@Si were suitable. Nickel desorption yield of around 80% from BB@Si was noted with 0.01 M HCl. The BB@Si column's breakthrough and exhausted points were identified to be 45 and 352 min, respectively. Its maximum exhaustion capacity value was determined to be 52.73 mg/g. Ni2+ removal from the actual wastewater sample exceeded 75%. The resulting outcomes imply the immense potential of employing BB@Si in the treatment of Ni2+- contaminated aqueous systems.

Applications of charcoal, activated charcoal, and biochar in aquaculture - A review

Environmental pollution and poor feed quality pose potential threats to aquatic organisms and human health, representing challenges for the aquaculture industry. In light of the rising demand for aquatic organisms, there is an urgent need to improve aquacultural production and protect the products from contamination. Char, a carbonaceous material derived through pyrolysis of organic carbon-rich biomass, has proven advantages in soil, air, and water remediation. While char's performance and the associated physicochemical characteristics depend strongly on the pyrolysis temperature, residence time, and feedstock type, char generally shows advantages in pollutant removal from the environment and livestock. This enables it to enhance the health and growth performance of livestock. Given the growing attention to char application in aquaculture in recent years, this review summarises major studies on three applications: aquacultural water treatment, sediment remediation, and char-feed supplement. Most of these studies have demonstrated char's positive effects on pollutant removal from organisms and aquacultural environments. Moreover, adopting char as fish feed can improve fish growth performance and the condition of their intestinal villi. However, due to insufficient literature, further investigation is needed into the mechanistic aspects of pollutants removal in aquatic organisms by char as a feed additive, such as the transportation of char inside aquatic organisms, the positive and negative effects of char on these products, and how char alters the gut microbiota community of these products. This paper presents an overview of the current application of char in aquaculture and highlights the research areas that require further investigation to enrich future studies.

Using the benzenepolycarboxylic acid (BPCA) method to assess activated biochars and their PFAS sorption abilities

Activated carbon (AC) has important industrial and environmental applications as it has excellent abilities to sorb contaminants such as per- and polyfluoroalkyl substances (PFAS). Current research aims to develop activated biochars (AB) from renewable biomass to replace AC that is produced from fossil feedstock. Both AC and AB are primarily comprised of condensed aromatic carbon (ConAC), the component that is the focus of this study. ConAC is characterized to determine its relationship with biochar activation conditions and PFAS sorption, which are understudied at present. Benzenepolycarboxylic acid (BPCA) markers for ConAC were quantified in steam-activated biochars (AB-Steam) and carbon dioxide-activated biochars (AB-CO2) prepared from waste timber at different temperatures (800, 850, 900 °C) and molar ratios of feedstock-carbon:steam (0.50 - 1.25). A non-activated biochar was also included as a reference. ConAC relative to total organic carbon content was higher in AB-Steam than in AB-CO2 (92 ± 2 % vs. 81 ± 11%). The ratio of benzenehexa- (B6CA) to benzenepentacarboxylic (B5CA) acids revealed that AB-Steam also had larger ConAC clusters than AB-CO2. These findings provide novel evidence that steam activation is more effective than CO2 activation in creating ConAC. To assess how ConAC impacts AB sorption abilities, AB-Steam were used to remediate PFAS from contaminated soils. The observed strong correlations between ConAC content and sorption of long-chain PFAS suggest the importance of hydrophobic interactions between PFAS tails and ConAC. Poor correlations for short-chain PFAS, on the other hand, indicated the existence of electrostatic repulsion interactions between PFAS head groups and ConAC. Collectively, these results explain the great ability of AB-Steam to sorb PFAS from contaminated soils (up to 100% remediation). More broadly, this work demonstrates that the BPCA method can be a valuable tool to assess the quality of biochars and other carbonaceous sorbents in relation to their production conditions or contaminant sorption abilities.

Research advances on production and application of algal biochar in environmental remediation

Algae, comprising microalgae and macroalgae, have emerged as a promising feedstock for the production of functional biochar. Recently, the application of algal biochar in environmental remediation gains increasing attention. This review summarizes research advancements in the synthesis and application of algal biochar, a versatile and sustainable material for environmental remediation ranging from wastewater treatment to soil improvement. Algal biochar can be prepared by pyrolysis, microwave-assisted pyrolysis, and hydrothermal carbonization. Physical and chemical modifications have proven to be effective for improving biochar properties. Algal biochar is promising for removing diverse pollutants including heavy metals, organic pollutants, and microplastics. The role in soil improvement signifies a sustainable approach to enhancing soil structure, nutrient retention, and microbial activity. Research gaps are identified based on current understanding, necessitating further exploration into variations in biochar characteristics, the performance improvement, large-scale applications, and the long-term evaluation for environmental application. This review provides a better understanding of algal biochar as a sustainable and effective tool in environmental remediation.

Transforming Waste into Wealth: Advanced Carbon-Based Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage

This comprehensive review addresses the need for sustainable and efficient energy storage technologies against escalating global energy demand and environmental concerns. It explores the innovative utilization of waste materials from oil refineries and coal processing industries as precursors for carbon-based electrodes in next-generation energy storage systems, including batteries and supercapacitors. These waste-derived carbon materials, such as semi-coke, coal gasification fine ash, coal tar pitch, petroleum coke, and petroleum vacuum residue, offer a promising alternative to conventional electrode materials. They present an optimal balance of high carbon content and enhanced electrochemical properties while promoting environmental sustainability through effectively repurposing waste materials from coal and hydrocarbon industries. This review systematically examines recent advancements in fabricating and applying waste-derived carbon-based electrodes. It delves into the methodologies for converting industrial by-products into high-quality carbon electrodes, with a particular emphasis on carbonization and activation processes tailored to enhance the electrochemical performance of the derived materials. Key findings indicate that while higher carbonization temperatures may impede the development of a porous structure, using KOH as an activating agent has proven effective in developing mesoporous structures conducive to ion transport and storage. Moreover, incorporating heteroatom doping (with elements such as sulfur, potassium, and nitrogen) has shown promise in enhancing surface interactions and facilitating the diffusion process through increased availability of active sites, thereby demonstrating the potential for improved storage capabilities. The electrochemical performance of these waste-derived carbon materials is evaluated across various configurations and electrolytes. Challenges and future directions are identified, highlighting the need for a deeper understanding of the microstructural characteristics that influence electrochemical performance and advocating for interdisciplinary research to achieve precise control over material properties. This review contributes to advancing electrode material technology and promotes environmental sustainability by repurposing industrial waste into valuable resources for energy storage. It underscores the potential of waste-derived carbon materials in sustainably meeting global energy storage demands.

Systematic review of alternative materials that improve retention of potentially toxic metals in soil/clay liners in waste disposal areas

When soils available for the construction of liners do not display the characteristics necessary for a good performance, mixtures with other materials can be employed for achieving the desired quality. Several researchers have addressed those mixtures from either a geotechnical or a gas diffusion perspective, emphasizing low hydraulic conductivity. However, in recent years, growing attention has been drawn to the ability of liners to mitigate contamination. The literature lacks studies on the use of amendments for soil liners or cover systems to retain potentially toxic metals, which are important inorganic contaminants. This paper provides a systematic review of the literature considering publications available on Web of Science and SpringerLink databases between January 1st, 2012, and December 5th, 2022. The aim of the review was to identify the types of soils and amendments studied as liners or cover systems for such retention of potentially toxic metals, the methodologies of application of the alternative materials in the soils, and the research gaps and perspectives in the field. Seventeen papers that addressed 31 materials as amendments were retrieved. The most studied amendment was coal fly ash, and 17 amendments were residues or by-products, which indicates concerns over waste destination and sustainability. Among the potentially toxic metals analyzed are Pb, Cu, and Cd. Gaps such as lack of pilot, field-scale, and long-term studies, as well as perspectives for future research (e.g., different liner configurations, concomitant mixtures of two or more materials in the soil, and focus on the sustainability of amendments), were identified.

Can lettuce plants grow in saline soils supplemented with biochar?

Salt stress is presently a major environmental concern, given the huge number of soils affected by the presence of dissolved salts. Therefore, it is necessary to find solutions, preferably nature-based ones, to deal with this problem. In this study, biochar, a product made from plant biomass residues through the process of pyrolysis, was tested to alleviate salt stress on lettuce (Lactuca sativa L.) plants. Six different concentrations of NaCl were tested: 0, 50, 100, 200, 300 and 400 mM with and without the addition of 5% (w/w) biochar. Biochar ability to mitigate salinity damage was assessed by means of both biometric (fresh weight), physiological (chlorophyll content), and biochemical (i.e., electrolyte leakage, total antioxidant power, total soluble proteins, free amino acids, and mineral content) parameters. The experiment lasted four weeks. The results showed that NaCl has a negative effect from the concentration of 100-200 mM and that biochar was to some extent effective in mitigating the negative effects of salt on plant physiology; nevertheless, biochar failed to counteract Na accumulation. Similarly, biochar did not influence the content of free amino acids in lettuce leaves, but enhanced the expression of several parameters, such as total antioxidant power, fresh weight, chlorophyll content, total soluble protein, K content, although only clearly evident in some cases. Overall, the present study showed that biochar is a viable solution to counteract the damage caused by high salt concentrations on plant growth.

Biochar as Alternative Material for Heavy Metal Adsorption from Groundwaters: Lab-Scale (Column) Experiment Review

The purpose of this manuscript is to present a review of laboratory experiments (including methodology and results) that use biochar, a specific carbon obtained by a pyrolysis process from different feedstocks, as an alternative material for heavy metal adsorption from groundwater. In recent years, many studies have been conducted regarding the application of innovative materials to water decontamination to develop a more sustainable approach to remediation processes. The use of biochar for groundwater remediation has particularly attracted the interest of researchers because it permits the reuse of materials that would be otherwise disposed of, in accordance with circular economy, and reduces the generation of greenhouse gases if compared to the use of virgin materials. A review of the different approaches and results reported in the current literature could be useful because when applying remediation technologies at the field scale, a preliminary phase in which the suitability of the adsorbent is evaluated at the lab scale is often necessary. This paper is therefore organised with a short description of the involved metals and of the biochar production and composition. A comprehensive analysis of the current knowledge related to the use of biochar in groundwater remediation at the laboratory scale to obtain the characteristic parameters of the process that are necessary for the upscaling of the technology at the field scale is also presented. An overview of the results achieved using different experimental conditions, such as the chemical properties and dosage of biochar as well as heavy metal concentrations with their different values of pH, is reported. At the end, numerical studies useful for the interpretation of the experiment results are introduced.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

A review of the next-generation biochar production from waste biomass for material applications

The development of carbonaceous materials such as biochar has triggered a hot spot in materials application. Carbon material derived from biomass could be a vital platform for energy storage and conversion. Biochar-based materials deliver a novel approach to deal with the current energy-related challenges. To design and utilize the maximum potential of biochar for environmentally sustainable applications, it is crucial to understand the recent progress and advancement in molecular structures of biochar to discover a new possible field to simplify structural application networks. However, most of the studies demonstrated the application of biochar in the form of soil enhancers and bio-adsorbents, reducing soil emissions of greenhouse gases and as fertilizers. The present review on biochar highlighted the application of biochar-based materials in various energy storage and conversion sectors, comprising different types of conversion technologies, biochar formation mechanisms, modification techniques on biochar surface chemistry and its functionality, catalysts, biochar application in energy storage gadgets such as supercapacitors and nanotubes, bio-based composite materials and inorganic based composites materials. Finally, this review addressed some vital outlooks on the prospect of the functionalization and best utilization of biochar-supported materials in numerous energy storage and conversion fields. After reviewing the literature, it was directed that advanced and in-depth research is essential for structural analysis and separation, considering the macroscopic and microscopic evidence of the formed structural design of biochar for specific applications.

Thermo-kinetic behaviour of green synthesized nanomaterial enhanced organic phase change material: Model fitting approach

Metal, carbon and conducting polymer nanoparticles are blended with organic phase change materials (PCMs) to enhance the thermal conductivity, heat storage ability, thermal stability and optical property. However, the existing nanoparticle are expensive and need to be handle with high caution during operation as well during disposal owing to its toxicity. Subsequently handling of solid waste and the disposal of organic PCM after longevity usage are of utmost concern and are less exposed. Henceforth, the current research presents a new dimension of exploration by green synthesized nanoparticles from a thorny shrub of an invasive weed named Prosopis Juliflora (PJ) which is a agro based solid waste. Subsequently, the research is indented to decide the concentration of green synthesized nanoparticle for effective heat transfer rate of organic PCM (Tm = 35-40 °C & Hm = 145 J/g). Furthermore, an in-depth understanding on the kinetic and thermodynamic profile of degradation mechanism involved in disposal of PCM after usage via Coats and Redfern technique is exhibited. Engaging a two-step method, we fuse the green synthesized nanomaterial with PCM to obtain nanocomposite PCM. On experimental evaluation, thermal conductivity of the developed nanocomposite (PCM + PJ) increases by 63.8% (0.282 W/m⋅K to 0.462 W/m⋅K) with 0.8 wt% green synthesized nanomaterial owing to the uniform distribution of nanoparticle within PCM matrix thereby contributing to bridging thermal networks. Subsequently, PCM and PCM + PJ nanocomposites are tested using thermogravimetric analyzer at different heating rates (05 °C/min; 10 °C/min; 15 °C/min & 20 °C/min) to analyze the decomposition kinetic reaction. The kinetic and thermodynamic profile of degradation mechanism involved in disposal of PCM and its nanocomposite of PCM + PJ provides insight on thermal parameters to be considered on large scale operation and to understand the complex nature of the chemical reactions. Adopting thirteen different chemical mechanism model under Coats and Redfern method we determine the reaction mechanism; kinetic parameter like activation energy (Ea) & pre-exponential factor (A) and thermodynamic parameter like change in enthalpy (ΔH), change in Gibbs free energy (ΔG) and change in entropy (ΔS). Dispersion of PJ nanomaterial with PCM reduces Ea from 370.82 kJ/mol-1 to 342.54 kJ/mol-1 (7.7% reduction), as the developed nanomaterial is enriched in carbon element and exhibits a catalytic effect for breakdown reaction. Corresponding, value of ΔG for PCM and PCM + PJ sample within heating rates of 05-20 °C/min varies between 168.95 and 41.611 kJ/mol-1. The current research will unbolt new works with focus on exploring the pyrolysis behaviour of phase change materials and its nanocomposite used for energy storage applications. This work also provides insights on the disposal of PCM which is an organic solid waste. The thermo-kinetic profile will help to investigate and predict the optimum heating rate and temperature range for conversion of micro-scale pyrolysis to commercial scale process.

Rice husk-based pyrogenic carbonaceous material efficiently promoted peroxymonosulfate activation toward the non-radical pathway for the degradation of pharmaceuticals in water

Pristine pyrogenic carbonaceous material (BRH) obtained from rice husk and modified with FeCl3 (BRH-FeCl3) were prepared and explored as carbocatalysts for the activation of peroxymonosulfate (PMS) to degrade a model pharmaceutical (acetaminophen, ACE) in water. The BRH-FeCl3/PMS system removed the pharmaceutical faster than the BRH/PMS. This is explained because in BRH-FeCl3, compared to BRH, the modification (iron played a role as a structuring agent mainly) increased the average pore diameter and the presence of functional groups such as -COO-, -Si-O-, or oxygen vacancies, which allowed to remove the pollutant through an adsorption process and significant carbocatalytic degradation. BRH-FeCl3 was reusable during four cycles and had a higher efficiency for activating PMS than another inorganic peroxide (peroxydisulfate, PDS). The effects of BRH-FeCl3 and PMS concentrations were evaluated and optimized through an experimental design, maximizing the ACE degradation. In the optimized system, a non-radical pathway (i.e., the action of singlet oxygen, from the interaction of PMS with defects and/or -COO-/-Si-O- moieties on the BRH-FeCl3) was found. The BRH-FeCl3/PMS system generated only one primary degradation product that was more susceptible to biodegradation and less active against living organisms than ACE. Also, the BRH-FeCl3/PMS system induced partial removals of chemical oxygen demand and dissolved organic carbon. Furthermore, the carbocatalytic system eliminated ACE in a wide pH range and in simulated urine, having a low-moderate electric energy consumption, indicating the feasibility of the carbocatalytic process to treat water polluted with pharmaceuticals.

Enhanced methane oxidation efficiency by digestate biochar in landfill cover soil: Microbial shifts and carbon metabolites insights

The ability of biochar to enhance the oxidation of methane (CH4) in landfill cover soil by promoting the growth and activity of methane-oxidizing bacteria (MOB) has attracted significant attention. However, the optimal characteristics of digestate-derived biochar (DBC) for promoting the MOB community and CH4 removal performance remain unclear. This study examined how the CH4 oxidation capacity and respiratory metabolism of MOB life process are affected by the application of DBC compared with the most commonly used woody-derived biochar (WBC). The addition of both WBC and DBC enhanced CH4 oxidation, with DBC exhibiting a nearly twofold increase in cumulative CH4 oxidation mass (7.14 mg CH4 g-1) compared to WBC. The high ion-exchange capacity of DBC was found to be more favorable for the growth of Type I MOB, which have more efficient metabolic pathways for CH4 oxidation. Type I MOB which are abundant in DBC may prefer monovalent positive ions, while the charge-rich nature of DBC may also have hindered extracellular protein aggregation. The superiority of DBC in terms of CH4 oxidation thus highlights the underlying mechanisms of biochar-MOB interactions, offering potential biochar options for landfill cover soil.

Overview of environmental and economic viability of activated carbons derived from waste biomass for adsorptive water treatment applications

In adsorptive water treatment applications, the exploration of waste-derived activated carbon (AC) has gained substantial attention in scientific research. The use of waste materials as precursors for AC has gained attention due to its economic viability and potential to reduce the consumption of non-renewable resources. However, there is a lack of comprehensive literature regarding the costs and environmental impacts associated with the waste-based AC production and application. As sustainability practices gain importance, there has been an increase in research dedicated to estimating costs and conducting life cycle assessment (LCA) of AC production from waste sources. However, there is a need for thorough literature reviews that cover various methodologies and conclusions. The primary objective of this study is to provide a comprehensive overview and analysis of the economic and environmental factors related to the use of waste-derived AC in water treatment. LCA studies indicate that utilizing waste materials for AC production can lead to significant resource and energy savings compared to conventional methods relying on fossil resources. The cost of AC is influenced by factors such as precursor material cost, energy requirements during production (optimizable on an industrial scale), and properties of the resulting material. Additionally, the review emphasizes the significance of waste-based AC regeneration for sustainable viability. Evaluating the environmental and economic costs is crucial to support sustainability claims and avoid unsupported assertions. Overall, this study contributes to understanding the potential of waste-derived AC in water treatment and highlights the need for further research in this area.

Biochar Benefits Green Infrastructure: Global Meta-Analysis and Synthesis

Urbanization has degraded ecosystem services on a global scale, and cities are vulnerable to long-term stresses and risks exacerbated by climate change. Green infrastructure (GI) has been increasingly implemented in cities to improve ecosystem functions and enhance city resilience, yet GI degradation or failure is common. Biochar has been recently suggested as an ideal substrate additive for a range of GI types due to its favorable properties; however, the generality of biochar benefits the GI ecosystem function, and the underlying mechanisms remain unclear. Here, we present a global meta-analysis and synthesis and demonstrate that biochar additions pervasively benefit a wide range of ecosystem functions on GI. Biochar applications were found to improve substrate water retention capacity by 23% and enhance substrate nutrients by 12-31%, contributing to a 33% increase in plant total biomass. Improved substrate physicochemical properties and plant growth together reduce discharge water volume and improve discharge water quality from GI. In addition, biochar increases microbial biomass on GI by ∼150% due to the presence of biochar pores and enhanced microbial growth conditions, while also reducing CO2 and N2O emissions. Overall results suggest that biochar has great potential to enhance GI ecosystem functions as well as urban sustainability and resilience.

Unique challenges posed by fire disturbance to water supply management and transfer agreements in a headwaters region

As a headwaters region, Colorado is a critical source of water for surrounding states and Mexico. But fuel densification and shifts in hydrometeorological processes, such as climate aridification and precipitation sharpening, are causing increasingly severe and erratic wildfire behavior and post-disturbance geomorphic hazards in and downstream of its forested source water areas. Human development patterns and inter and intra-state water rights agreements further complicate resource management. This is prompting land managers to consider progressive planning and management tools to mitigate fire-related degradation of water supply and irrigation systems. This narrative review examines aspects of Colorado's geography, demography, and hydrology that make its water supply systems and transfer agreements particularly vulnerable to landscape disturbance and then provides hazard mitigation recommendations. Readers are introduced to Colorado's water supply portfolio including how water is moved, stored, treated, and consumed; why those systems are vulnerable to wildfire disturbance; and how risk can be reduced before and after fires occur. Lessons learned are applicable to other source water areas facing similar challenges. By synthesizing our review findings, we identified numerous research and programmatic gaps including the need for more interdisciplinary studies; a lack of explicit research into how disturbance-driven hydromodification may hinder the ability of headwater regions to exercise their water rights and fulfill water transfer agreements (crucial for reducing potential future water conflict); an unresolved debate regarding the potential effects of forest treatments on water yield; and the need for additional funding to roll out tools and educational programs to communities experiencing severe wildfire activity for the first time.

Tomato waste biochar in the framework of circular economy

Tomato pomace was slowly pyrolyzed at 350 and 550 °C (under an N₂ flow of 50 L/h) at a rate of 6 °C/min and a residence time of 1:30 h to produce two biochars named B350 and B550, respectively. In addition, the two biochars were chemically activated with ΚΟΗ (at a ratio of 1:10 w/v) at 800 °C to produce two new materials named BA350 and BA550. The four biochars produced were characterized physically and chemically (pH, yield, calorific value). They were also analyzed by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (B.E.T), elemental analysis (EA), and thermogravimetric analysis (TGA). The results showed that as the pyrolysis temperature increased (350 to 550 °C), the specific surface area (SSA) increased. The latter was also significantly increased by the activation process. EA showed a variation in the mineral content of the produced biochars, resulting in a different content of the biochars after activation. The parameters studied showed that biochars from tomato waste could be used as an organic amendment to improve soil fertility in agricultural. In addition, because of their ability to absorb water, they could be used as a water reservoir in soils in arid areas.

Critical Review on the Mechanisms of Fe2+ Regeneration in the Electro-Fenton Process: Fundamentals and Boosting Strategies

This review presents an exhaustive overview on the mechanisms of Fe³⁺ cathodic reduction within the context of the electro-Fenton (EF) process. Different strategies developed to improve the reduction rate are discussed, dividing them into two categories that regard the mechanistic feature that is promoted: electron transfer control and mass transport control. Boosting the Fe³⁺ conversion to Fe²⁺ via electron transfer control includes: (i) the formation of a series of active sites in both carbon- and metal-based materials and (ii) the use of other emerging strategies such as single-atom catalysis or confinement effects. Concerning the enhancement of Fe²⁺ regeneration by mass transport control, the main routes involve the application of magnetic fields, pulse electrolysis, interfacial Joule heating effects, and photoirradiation. Finally, challenges are singled out, and future prospects are described. This review aims to clarify the Fe³⁺/Fe²⁺ cycling process in the EF process, eventually providing essential ideas for smart design of highly effective systems for wastewater treatment and valorization at an industrial scale.

Sewage sludge biochars as effective PFAS-sorbents

The use of sewage sludge to produce biochar-based sorbents for per- and polyfluoroalkyl substances (PFAS) removal from water and soil may be an economically and environmentally sustainable waste management option. This study compared the sorption of six perfluorinated carboxylic acids (PFCAs) by two sewage sludge biochars (SSBCs) and one wood chip biochar (WCBC), dry pyrolyzed at 700 °C. Batch sorption tests were conducted by adding individual PFCAs and a PFCA-mixture to pure biochars and mixtures of biochar and a sandy soil (1.3% TOC). PFAS-sorption to the SSBCs exhibited log-linear biochar-water distribution coefficients (log K_d), comparable to those previously reported for commercial activated carbons (e.g., 5.73 ± 0.02 for perfluorooctanoic acid at 1 µg/L). The strong sorption of PFCAs was attributed to the SSBCs relatively high pore volumes in the pore size range that can accommodate these compounds. Sorption was attenuated by the presence of soil (by factors 3-10), by the presence of a mixture of PFCAs (by factors of 6-532) and by both together (by factors of 8-6581), indicating strongly competitive sorption between PFCA-congeners, and less severe sorption attenuation by soil organic matter. These findings could enable sustainable value chains for SSBs in soil remediation and water filtration solutions.

Biochar improves the performance of Avena sativa L. grown in gasoline-polluted soils

This study investigated the effect of soil contamination by different concentrations of gasoline on oat (Avena sativa L.) and tested the effect of biochar supply to the polluted soils on the performance of oat plants. Oat seeds were sowed in contaminated soils with different concentrations of gasoline: 0% (control), 1%, 2%, 6%, and 10% (v/w), and grown for 2 weeks. Germination, fresh weight, root and stem length, photosynthetic parameters (i.e., chlorophyll content, PI_ABS, F_V/F_M, and NDVI), and total antioxidant power were analyzed. The results showed a remarkable negative effect on almost all the investigated parameters starting from the gasoline concentration of 6%. Based on these results, a new experiment was run by adding 5% (w/w) biochar (a carbon-rich byproduct of wood biomass pyrolysis) to the 6% and 10% polluted soils to test whether adding biochar had a beneficial effect on oat performance. The results showed that biochar supply greatly reduced the negative effects caused by gasoline on all the investigated parameters.

The Role of Nanoengineered Biochar Activated with Fe for Sulfanilamide Removal from Soils and Water

Biochar is a nanoengineered sorbent proposed to control the contamination derived from the presence of residual concentrations of sulfonamides in soil. In this work, we evaluated the sorption of sulfanilamide (SFA) in commercial biochar (BC) produced at 500 °C from oak hardwood (Quercus ilex) and its analog activated with 2% (w/w) Fe (BC-Fe). Subsequently, the effect on dissipation and transport of SFA in untreated soil and soil treated with BC and BC-Fe was also assessed. Laboratory batch studies revealed that BC-Fe increased the sorption of SFA as compared to the pristine BC with Kd of 278 and 98 L/kg, respectively. The dissipation of SFA in either untreated soil or soil treated with BC or BC-Fe was similar, displaying half-lives ranging between 4 and 6.4 days. Conversely, the concurrent determination of sorption during the incubation experiment showed that lower amounts of SFA in solution at the beginning of the experiments were bioavailable in BC-Fe-treated soil when compared to the rest of the treatments shortly after application. Leaching column studies confirmed the amendment's capability to bind the SFA compound. Therefore, the decrease in bioavailability and movement of SFA in treated soils suggest that biochar soil application can reduce SFA soil and water contamination. According to our results, BC surface modification after Fe activation may be more appropriate for water decontamination than for soil since there were no significant differences between the two types of biochar when added to the soil. Therefore, these outcomes should be considered to optimize the SFA mitigation potential of biochar.

Physical-Chemical Characterization of Different Carbon-Based Sorbents for Environmental Applications

Biochar has been used in various applications, e.g., as a soil conditioner and in remediation of contaminated water, wastewater, and gaseous emissions. In the latter application, biochar was shown to be a suitable alternative to activated carbon, providing high treatment efficiency. Since biochar is a by-product of waste pyrolysis, its use allows for compliance with circular economics. Thus, this research aims to obtain a detailed characterization of three carbonaceous materials: an activated carbon (CARBOSORB NC 1240^®) and two biochars (RE-CHAR^® and AMBIOTON^®). In particular, the objective of this work is to compare the properties of three carbonaceous materials to evaluate whether the application of the two biochars is the same as that of activated carbon. The characterization included, among others, particle size distribution, elemental analysis, pH, scanning electron microscope, pore volume, specific surface area, and ionic exchange capacity. The results showed that CARBOSORB NC 1240^® presented a higher specific surface (1126.64 m²/g) than AMBIOTON^® (256.23 m²/g) and RE-CHAR^® (280.25 m²/g). Both biochar and activated carbon belong to the category of mesoporous media, showing a pore size between 2 and 50 nm (20-500 Å). Moreover, the chemical composition analysis shows similar C, H, and N composition in the three carbonaceous materials while a higher O composition in RE-CHAR^® (9.9%) than in CARBOSORB NC 1240 ^® (2.67%) and AMBIOTON^® (1.10%). Differences in physical and chemical properties are determined by the feedstock and pyrolysis or gasification temperature. The results obtained allowed to compare the selected materials among each other and with other carbonaceous adsorbents.

Removal of reactive violet 5 azodye (V5R) using bamboo, and calabash biochar

We assess the adsorption capacity of bamboo and calabash biochar (BB and CB). Using 10-50 mg/L Reactive Violet 5 Azo dye (V5R) adsorbate, the kinetics, and adsorption isotherms are investigated. We pyrolyzed the bamboo, and calabash biomass at 500 °C, washed, and oven dried at 120 °C for 48 h. The Brunauer-Emmett-Teller (BET) method indicates that the BB and CB average pore diameters are 21.1 nm and 26.5 nm, with specific surface areas of 174.67 m²/g and 44.78 m²/g, respectively. The SEM reveals a larger granular shape of the CB having pinholes on the surface, but the BB exhibited interconnected structures like a mesh. The FTIR shows C=C, C=O, O-H, and C-O-C as the predominant functional groups on both BB and CB. The adsorption of V5R on BB and CB follows pseudo-second-order kinetics and favors Langmuir isotherm with maximum adsorption capacities of 5.106 mg/g, and 0.010 mg/g, respectively. The BB adsorbs 70.9-96% V5R, whilst CB adsorbs 0.1-0.2 % only. The results suggest that bamboo biochar has the potential to eliminate 70.9-96% of 10-50 mg/L V5R from an aqueous solution, hence suitable for removing V5R. In this study, we have also presented a prototype expected to eliminate 91.6%-99.8% of the V5R from an aqueous solution.

Current analytical methods to quantify PAHs in activated carbon and vegetable carbon (E153) are not fit for purpose

Pyrogenic carbonaceous materials (PCM) are increasingly used in a wide variety of consumer products, ranging from medicine, personal care products, food and feed additives, as well as drinking water purification. Depending on the product category and corresponding legislation, several terms are commonly used for PCM, such as Carbo activatus, C. medicinalis, vegetable carbon (E153), (activated) charcoal, (activated) biochar, or activated carbon. All PCM contain polycyclic aromatic hydrocarbons (PAHs) co-produced during pyrolysis. However, the actual PAH-content of PCM may range from negligibly low to alarmingly high depending on pyrolysis conditions and, if any, subsequent activation. Because of their health risk, PAHs need to be determined in many such PCM containing products, and concentrations are regulated by respective legally binding documents. Several such documents even specify the analytical method to be used. In this paper, we first argue that based on existing literature, currently legally binding methods to quantify PAHs in such products might not be fit for purpose. Secondly, we exemplarily determined PAH concentrations with a method previously optimized for biochar in a selection of 15 PCM or PCM-containing commercial products, illustrating that concentrations up to 30 mg kg^-1 can be found. Consumer safety is of concern according to Swiss norms for drinking water and EU regulations for food additives for some of the investigated samples. In fact, some products would not have been allowed to be put on the market, if regulations with fit for purpose analytical methods existed. As PAHs were detected in considerable concentrations when extracted with toluene for 36 h, the authors suggest a corresponding adaption of existing methods and harmonization of the legislation.

Nanoporous carbon materials as a sustainable alternative for the remediation of toxic impurities and environmental contaminants: A review

Due to rapidly deteriorating water resources, the world is looking forward to a sustainable alternative for the remediation of noxious pollutants such as heavy metals and organic and gaseous contaminants. To address this global issue of environmental pollution, nanoporous carbon materials (NPCMs) can be used as a one-stop solution. They are widely applied as adsorbents for many toxic impurities and environmental contaminants. The present review provides a detailed overview of the role of different synthesis factors on the porous characteristics of carbon materials, activating agents, reagent-precursor ratio and their potential application in the remediation. Findings revealed that synthetic parameters result in the formation of microporous NPCMs (S_BET: >4000 m³/g; V_Total (cm³/g) ≥ 2; V_Micro (cm³/g) ≥ 1), micromesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.7) and mesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.5) NPCMs. Moreover, it was observed that a narrow pore size distribution (0.5-2.0 nm) yields excellent results in the remediation of noxious contaminants. Further, chemical activating agents such as NaOH, KOH, ZnCl₂, and H₃PO₄ were compared. It was observed that activating agents KОН, H₃PO₄, and ZnCl₂ were generally used and played a significant role in the possible large-scale production and commercialization of NPCMs. Thus, it can be interpreted that with a well-planned strategy for the synthesis, NPCMs with a "tuned" porosity for a specific application, in particular, microporosity for the accumulation and adsorption of energetically important gases (CO₂, CH₄, H₂), micro-mesoporosity and mesoporosity for high adsorption capacity for towards metal ions and a large number of dyes, respectively.

Surface Modification of Biochar for Dye Removal from Wastewater

Nowadays, biochar is being studied to a great degree because of its potential for carbon sequestration, soil improvement, climate change mitigation, catalysis, wastewater treatment, energy storage, and waste management. The present review emphasizes on the utilization of biochar and biochar-based nanocomposites to play a key role in decontaminating dyes from wastewater. Numerous trials are underway to synthesize functionalized, surface engineered biochar-based nanocomposites that can sufficiently remove dye-contaminated wastewater. The removal of dyes from wastewater via natural and modified biochar follows numerous mechanisms such as precipitation, surface complexation, ion exchange, cation–π interactions, and electrostatic attraction. Further, biochar production and modification promote good adsorption capacity for dye removal owing to the properties tailored from the production stage and linked with specific adsorption mechanisms such as hydrophobic and electrostatic interactions. Meanwhile, a framework for artificial neural networking and machine learning to model the dye removal efficiency of biochar from wastewater is proposed even though such studies are still in their infancy stage. The present review article recommends that smart technologies for modelling and forecasting the potential of such modification of biochar should be included for their proper applications.

Biochar production with amelioration of microwave-assisted pyrolysis: Current scenario, drawbacks and perspectives

In recent years, biomass has been reported to obtain a wide range of value-added products. Biochar can be obtained by heating biomass, which aids in carbon sinks, soil amendments, resource recovery, and water retention. Microwave technology stands out among various biomass heating technologies not only for its effectiveness in biomass pyrolysis for the production of biochar and biofuel but also for its speed, volumetrics, selectivity, and efficiency. The features of microwave-assisted biomass pyrolysis and biochar are briefly reviewed in this paper. An informative comparison has been drawn between microwave-assisted pyrolysis and conventional pyrolysis. It focuses mainly on technological and economic scenario of biochar production and environmental impacts of using biochar. This source of knowledge would aid in the exploration of new possibilities and scope for employing microwave-assisted pyrolysis technology to produce biochar.

Linking the effect of temperature on adsorption from aqueous solution with solute dissociation

Imperative decarbonization of water purification processes entails alternative regeneration methods for activated carbon. Regeneration based on changing dissociation equilibria, i.e. a major influencing factor on adsorption, usually requires the addition of acids/bases, but may also be triggered by temperature swing. Although adsorption and dissociation are both temperature-dependent phenomena, their conjunction has received little attention regarding trace organic compounds (TrOCs) and large temperature intervals, in particular above ΔT ≥ 50 ^∘C. Therefore, we studied the adsorption equilibria of 16 TrOCs onto one granular activated carbon at temperatures ranging from 20 to 95 ^∘C. The majority of compounds (12/16) exhibited an exothermic apparent adsorption enthalpy, while 3 out of 16 exhibited an endothermic apparent enthalpy. The range spanned from - 46 to + 50 kJ mol^-1 (median at - 17 kJ mol^-1). The possible origins of endothermic adsorption were discussed. A rationale of shifting pK_a and thus changing dissociation of TrOCs was introduced and traded off against existing rationales, i.e. changing solute solubility, changing adsorption heat capacity, and saturation effects of the adsorbates. This knowledge may allow designing temperature swing adsorption processes that unlock the dissociation switch. The augmented process efficiency can thus provide the foundation for low-carbon emission, circular water purification processes.

A Review of Recent Advances in Spent Coffee Grounds Upcycle Technologies and Practices

Coffee is the world’s second largest beverage only next to water. After coffee consumption, spent coffee grounds (SCGs) are usually thrown away and eventually end up in landfills. In recent years, technologies and policies are actively under development to change this century old practice, and develop SCGs into value added energy and materials. In this paper, technologies and practices are classified into two categories, those reuses SCGs entirely, and those breakdown SCGs and reuse by components. This article provided a brief review of various ways to reuse SCGs published after 2017, and provided more information on SCG quantity, SCG biochar development for pollutant removal and using SCG upcycle cases for education. SCG upcycle efforts align the best with the UN Sustainable Development Goals (SDG) #12 “ensure sustainable consumption and production patterns,” the resultant fuel products contribute to SDG #7 “affordable and clean energy,” and the resultant biochar products contribute to SDG #6, “clean water and sanitation.”

Impact of Different Methods of Root-Zone Application of Biochar-Based Fertilizers on Young Cocoa Plants: Insights from a Pot-Trial

Effective and efficient nutrient management is central to best-practice agriculture, facilitating sustainable intensification while reducing negative externalities. The application of biochar-based fertilizers (BBF) in tropical agronomy has the potential to improve nutrient management by enhancing nutrient availability and uptake. Here, we performed pot-trials with Theobroma cacao L. seedlings planted in an Oxisol with critically low phosphorus levels. Four fertilizer levels were deployed, including BBFs using micro-dosed biochar (16 g plant−1 i.e., 0.3% soil amendment w/w) charged with mineral fertilizer. Three different fertilizer-placement levels (topsoil, root-zone hotspot and root-zone layer) were evaluated. The results from the topsoil application of mineral fertilizer (farmer practice) served as the reference data. The root-zone layer application of BBF increased the aboveground biomass, total leaf area and chlorophyll content index by 56%, 222%, and 140% respectively. Foliar phosphorus levels were also significantly elevated by 53%. The N:P ratio of the foliar tissue was improved, indicating the potential of BBF to ameliorate P limitations. Thus, low dosages of biochar, which is upgraded to BBF, can considerably improve plant nutrition. Small scale technology to produce biochar can be easily adopted and integrated in T. cacao systems. We suggest that BBF production and application within tropical, perennial systems can contribute to achieving a range of sustainable development goals (SDGs), including climate action.

Root-Zone Amendments of Biochar-Based Fertilizers: Yield Increases of White Cabbage in Temperate Climate

The use of biochar is an important tool to improve soil fertility, reduce the negative environmental impacts of agriculture, and build up terrestrial carbon sinks. However, crop yield increases by biochar amendment were not shown consistently for fertile soils under temperate climate. Recent studies show that biochar is more likely to increase crop yields when applied in combination with nutrients to prepare biochar-based fertilizers. Here, we focused on the root-zone amendment of biochar combined with mineral fertilizers in a greenhouse trial with white cabbage (Brassica oleracea convar. Capitata var. Alba) cultivated in a nutrient-rich silt loam soil originating from the temperate climate zone (Bavaria, Germany). Biochar was applied at a low dosage (1.3 t ha−1). The biochar was placed either as a concentrated hotspot below the seedling or it was mixed into the soil in the root zone representing a mixture of biochar and soil in the planting basin. The nitrogen fertilizer (ammonium nitrate or urea) was either applied on the soil surface or loaded onto the biochar representing a nitrogen-enhanced biochar. On average, a 12% yield increase in dry cabbage heads was achieved with biochar plus fertilizer compared to the fertilized control without biochar. Most consistent positive yield responses were observed with a hotspot root-zone application of nitrogen-enhanced biochar, showing a maximum 21% dry cabbage-head yield increase. Belowground biomass and root-architecture suggested a decrease in the fine root content in these treatments compared to treatments without biochar and with soil-mixed biochar. We conclude that the hotspot amendment of a nitrogen-enhanced biochar in the root zone can optimize the growth of white cabbage by providing a nutrient depot in close proximity to the plant, enabling efficient nutrient supply. The amendment of low doses in the root zone of annual crops could become an economically interesting application option for biochar in the temperate climate zone.

Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds

Persistent endocrine-disrupting compounds (EDCs) in bodies of water are a concern for human health and constitute an environmental issue, even if present in trace amounts. Conventional treatment systems do not entirely remove EDCs from discharge effluent. Due to the ultra-trace level of EDCs which affect human health and pose an environmental issue, developing new approaches and techniques to remove these micropollutants from the discharged effluent is vital. This review discusses the most common methods of eliminating EDCs through preliminary, primary, secondary and tertiary treatments. The adsorption process is favoured for EDC removal, as it is an economical and straightforward option. The NABC aspects, which are the need, approach, benefits and challenges, were analysed based on existing circumstances, highlighting biochar as a green and renewable adsorbent for the removal of organic contaminants. From the environmental point of view, the effectiveness of this method, which uses natural fibre from the kenaf plant as a porous and economical biochar material with a selected lignocellulosic biomass, provides insights into the advantages of biochar-derived adsorbents. Essentially, the improvement of the natural fibre as an adsorbent is a focus, using carbonisation, activation, and the physiochemical process to enhance the adsorption ability of the material for pollutants in bodies of water. This output will complement sustainable water management approaches presented in previous studies for combating the emerging pollutant crisis via novel green and environmentally safe options.

Anaerobic digestate management, environmental impacts, and techno-economic challenges

Digestate is a nutrient-rich by-product from organic waste anaerobic digestion but can contribute to nutrient pollution without comprehensive management strategies. Some nutrient pollution impacts include harmful algal blooms, hypoxia, and eutrophication. This contribution explores current productive uses of digestate by analyzing its feedstocks, processing technologies, economics, product quality, impurities, incentive policies, and regulations. The analyzed studies found that feedstock, processing technology, and process operating conditions highly influence the digestate product characteristics. Also, incentive policies and regulations for managing organic waste by anaerobic digestion and producing digestate as a valuable product promote economic benefits. However, there are not many governmental and industry-led quality assurance certification systems for supporting commercializing digestate products. The sustainable and safe use of digestate in different applications needs further development of technologies and processes. Also, incentives for digestate use, quality regulation, and social awareness are essential to promote digestate product commercialization as part of the organic waste circular economy paradigm. Therefore, future studies about circular business models and standardized international regulations for digestate products are needed.

Impact of Biochar Amendment on Soil Properties and Organic Matter Composition in Trace Element-Contaminated Soil

The application of biochar as an organic amendment in polluted soils can facilitate their recovery by reducing the availability of contaminants. In the present work, the effect of biochar application to acid soils contaminated by heavy metal spillage is studied to assess its effect on the quantity and composition of soil organic matter (SOM), with special attention given to soil humic acids (HAs). This effect is poorly known and of great importance, as HA is one of the most active components of SOM. The field experiment was carried out in 12 field plots of fluvisols, with moderate and high contamination by trace elements (called MAS and AS, respectively), that are located in the Guadiamar Green Corridor (SW Spain), which were amended with 8 Mg·ha⁻¹ of olive pit biochar (OB) and rice husk biochar (RB). The results indicate that 22 months after biochar application, a noticeable increase in soil water holding capacity, total organic carbon content, and soil pH were observed. The amounts of oxidisable carbon (C) and extracted HAs in the soils were not altered due to biochar addition. Thermogravimetric analyses of HAs showed an increase in the abundance of the most thermostable OM fraction of the MAS (375–650 °C), whereas the HAs of AS were enriched in the intermediate fraction (200–375 °C). Spectroscopic and chromatographic analyses indicate that the addition of biochar did not alter the composition of the organic fraction of HAs, while Cu, Fe, and as were considerably accumulated at HAs.

A Review on Bamboo as an Adsorbent for Removal of Pollutants for Wastewater Treatment

Water and wastewater treatment are very important for obtaining clean and sanitary water as well as protecting the environment from toxic pollutants. Not only enriched with cellulose and carbon but the abundant resources of bamboo also make it suitable to be utilized as an adsorbent. With the right processing technologies and improvements, the potential of bamboo is unlimited. This study review provides knowledge on the use of bamboo-based adsorbents for the removal of contaminants and pollutants in wastewater in the form of activated carbon, biochar, and aerogel. This review highlighted bamboo utilization and its relevance as an adsorbent for wastewater treatment. The technologies for the processing and improvement of bamboo as well as the performance of the bamboo-based adsorbents are also discussed in this study. The adsorption capacity of bamboo has shown improvement with modification and good adsorption capacity achieved with some of the adsorbent being able to be recycled and reused.

Rice Straw Biochar and Magnetic Rice Straw Biochar for Safranin O Adsorption from Aqueous Solution

This study investigates the adsorption of Safranin O (SO) from aqueous solution by both biochar and magnetic biochar derived from rice straw. Rice straw biochar (RSB) was made by pyrolysis in a furnace at 500 °C, using a heating rate of 10 °C·min−1 for 2 h in an oxygen-limited environment, whilst the magnetic rice straw biochar (MRSB) was produced via the chemical precipitation of Fe2+ and Fe3+. The physicochemical properties of the synthesized biochars were characterized using SEM, SEM- EDX, XRD, FTIR techniques, and N2 adsorption (77 K) and pHpzc measurements. Batch adsorption experiments were used to explore the effect of pH, biochar dosage, kinetics, and isotherms on the adsorption of SO. Experimental data of RSB and MRSB fit well into both Langmuir and Freundlich isotherm models, and were also well-explained by the Lagergren pseudo-second-order kinetic model. The maximum SO adsorption capacity of MRSB was found to be 41.59 mg/g, while for RSB the figure was 31.06 mg/g. The intra-particle diffusion model indicated that the intra-particle diffusion may not be the only rate-limiting step. The collective physical and chemical forces account for the adsorption mechanism of SO molecules by both RSB and MRSB adsorbents. The obtained results demonstrated that the magnetic biochar can partially enhance the SO adsorption capacity of its precursor biochar and also be easily separated from the solution by using an external magnet.

Development of high slip-resistant footwear outsole using rubber surface filled with activated carbon/sodium chloride

High slip-resistant footwear outsoles can reduce the risk of slip and fall on wet and icy surfaces. Falls on wet and icy surfaces can cause serious life-threatening injuries, especially for older adults. Here we show that footwear outsoles using the rubbers filled with activated carbon or sodium chloride produce higher friction force and reduce the slip rate in walking. We have identified that small depressions were formed on outsole materials filled with activated carbon or sodium chloride during friction between the rubber and surface leading to some air ingress into the interface. While there are air bubbles between the rubber and surface, real contacts are surrounded by water with negative pressure (Laplace pressure). It is considered that the negative pressure promotes real contact formation, which causes high friction. We consider that the outsole materials filled with activated carbon or sodium chloride can reduce the risk of slip-and-fall accidents.

Comparison of Novel Biochars and Steam Activated Carbon from Mixed Conifer Mill Residues

There is increasing demand in environmental remediation and other sectors for specialized sorbents made from renewable materials rather than hard coals and minerals. The proliferation of new pyrolysis technologies to produce bio-based energy, fuels, chemicals, and bioproducts from biomass has left significant gaps in our understanding of how the various carbonaceous materials produced by these systems respond to processes intended to improve their adsorption properties and commercial value. This study used conventional steam activation in an industrial rotary calciner to produce activated carbon (AC) from softwood biochars made by three novel pyrolysis systems. Steam was injected across four heating zones ranging from 816 °C to 927 °C during paired trials conducted at calciner retention times of 45 min and 60 min. The surface area of the three biochars increased from 2.0, 177.3, and 289.1 m2 g−1 to 868.4, 1092.9, and 744.8 m2 g−1, respectively. AC iodine number ranged from 951 to 1218 mg g−1, comparing favorably to commercial AC produced from bituminous coal and coconut shell. The results of this study can be used to operationalize steam activation as a post-processing treatment for biochar and to expand markets for biochar as a precursor in the manufacture of specialized industrial sorbents.

New directions and challenges in engineering biologically-enhanced biochar for biological water treatment

Cost-effective, efficient, and sustainable water treatment solutions utilising existing materials and technology will make it easier for low and middle-income countries to adopt them, improving public health. The ability of biochar to mediate and support microbial degradation of contaminants, combined with its carbon-sequestration potential, has attracted attention in recent years. Biochar is a possible candidate for use in cost-effective and sustainable biological water treatment, especially in agrarian economies with easy access to abundant biomass in the form of crop residues and organic wastes. This review evaluates the scope, potential benefits (economic and environmental) and challenges of sustainable biological water treatment using 'Biologically-Enhanced Biochar' or BEB. We discuss the various processes occurring in BEB systems and demonstrate the urgent need to investigate microbial degradation mechanisms. We highlight the need to correlate biochar properties to biofilm development, which can eventually determine process efficiency. We also demonstrate the various opportunities in adopting BEB as a cheaper and more viable alternative in Low and Middle Income Countries and compare it to the current benchmark, 'Biological Activated Carbon'. We focus on the recent advances in the areas of data science, mathematical modelling and molecular biology to systematically and sustainably design BEB filters, unlike the largely empirical design approaches seen in water treatment. 'Sequential biochar systems' are introduced as specially designed end-of-life techniques to lower the environmental impact of BEB filters and examples of their integration into biological water treatment that can fulfil zero waste criteria for BEBs are given.

Biochar Amendment Reduces the Availability of Pb in the Soil and Its Uptake in Lettuce

The aim of this study was to investigate the ability of biochar amendment to reduce the availability of Pb in the soil and its uptake in lettuce (Lactuca sativa L. var. adela). Seedlings of lettuce were cultivated in Pb-contaminated soils, both with and without 5% biochar (w/w), as well as in a simplified soilless system (hydroponics) at the ecologically relevant Pb concentration of 100 µM, both with and without 1% biochar. Soils amended with biochar resulted in a ca. 50% reduction of the extractable (bioavailable) fraction of Pb, limiting the accumulation of this toxic element in the leaves of lettuce by ca. 50%. A similar behavior was observed for lettuce plants grown hydroponically, even with a much higher reduction of Pb uptake (ca. 80%). Increased cation exchange capacity and pH were likely the main factors limiting the bioavailability of Pb in the soil. Complexation with functional groups and precipitation/co-precipitation both on the biochar surface and in soil aggregates were likely the main mechanisms immobilizing this element.