Towards the Implementation of Circular Economy in the Wastewater Sector: Challenges and Opportunities

Unravelling the mechanisms of organic micropollutant removal in bio-electrochemical systems: Insights into sorption, electrochemical degradation, and biodegradation processes

Bio-electrochemical systems (BESs) have recently been proposed as an efficient treatment technology to remove organic micropollutants from water treatment plants. In this study, we aimed to differentiate between sorption, electrochemical transport/degradation, and biodegradation. Using electro-active microorganisms and electrodes, we investigated organic micropollutant removal at environmentally relevant concentrations, clarifying the roles of sorption and electrochemical and biological degradation. The role of anodic biofilms on the removal of 10 relevant organic micropollutants was studied by performing separate sorption experiments on carbon-based electrodes (graphite felt, graphite rod, graphite granules, and granular activated carbon) and electrochemical degradation experiments at two different electrode potentials (-0.3 and 0 V). Granular activated carbon showed the highest sorption of micropollutants; applying a potential to graphite felt electrodes increased organic micropollutant removal. Removal efficiencies >80 % were obtained for all micropollutants at high anode potentials (+0.955 V), indicating that the studied compounds were more susceptible to oxidation than to reduction. All organic micropollutants showed removal when under bio-electrochemical conditions, ranging from low (e.g. metformin, 9.3 %) to exceptionally high removal efficiencies (e.g. sulfamethoxazole, 99.5 %). The lower removal observed under bio-electrochemical conditions when compared to only electrochemical conditions indicated that sorption to the electrode is key to guarantee high electrochemical degradation. The detection of transformation products of chloridazon and metformin indicated that (bio)-electrochemical degradation occurred. This study confirms that BES can treat some organic micropollutants through several mechanisms, which merits further investigation.

Life cycle assessment to evaluate the integral water cycle in industrial supply: A real case study

Wastewater recycling technologies are developed in areas where the necessity of water resources cannot be satisfied by natural sources. Nevertheless, nowadays trends and European Union Plans show an increasing interest on using these technologies to reduce environmental impacts. This manuscript aims to address the question of the real environmental results of using these technologies and the differences between each specific case using the Life Cycle Assessment (LCA) methodology. A real case study is analyzed to answer this question: the integral water cycle of a northern of Spain, comparing a traditional water supply system (system I), and an alternative wastewater regeneration plant (system II). System II presents a higher impact for all categories (between 1.2 and 37 times higher), except for land use, where it is reduced by 53 %. These results show a larger impact produced by the alternative system due to higher energy and chemical product consumption. Energy consumption is the main factor causing the highest impact in most of the impact categories for both studied systems, including the one associated to the water resource consumption. It accounts for at least 50 % of the total impact for each system in 7 of the 16 evaluated impact categories. In terms of climate change, energy consumption is not particularly significant in system I, but it is for system II, where it represents around 50 % of that impact. In the categories where the impact is not determined by energy consumption, chemical product consumption and waste and discharge treatment are the most relevant factors. In this sense, this paper highlights the importance of analysing each case specifically and underscores the usefulness of using LCA methodology as a tool to improve decision-making in resource management, with water resources emerging as a crucial focal point.

Current trends and future directions of global research on wastewater to energy: a bibliometric analysis and review

This paper presents a structured bibliometric analysis and review of the research publications recorded in the Web of Science database from 2000 to 2023 to methodically examine the landscape and development of the 'wastewater to energy' research field in relation to global trends, potential hotspots, and future research directions. The study highlights three main research themes in 'wastewater to energy', which are biogas production through anaerobic digestion of sewage sludge, methane generation from microbial wastewater treatment, and hydrogen production from biomass. The analysis reveals activated sludge, biochar, biomethane, biogas upgrading, hydrogen, and circular economy as key topics increasingly gaining momentum in recent research publications as well as representing potential future research directions. The findings also signify transformation to SDGs and circular economy practices, through the integration of on-site renewables and biogas upgrading for energy self-sufficiency, optimising energy recovery from wastewater treatment systems, and fostering research and innovation in 'wastewater to energy' supported by policy incentives. By shedding light on emerging trends, cross-cutting themes, and potential policy implications, this study contributes to informing both knowledge and practices of the 'wastewater to energy' research community.

A multi-criteria decision framework for circular wastewater systems in emerging megacities of the Global South

Lima faces increasing water stress due to demographic growth, climate change and outdated water management infrastructure. Moreover, its highly centralized wastewater management system is currently unable to recover water or other resources. Hence, the primary aim of this study is to identify suitable wastewater treatment alternatives for both eutrophication mitigation and indirect potable reuse (IPR). For eutrophication mitigation, we examined MLE, Bardenpho, Step-feed, HF-MBR, and FS-MBR. For IPR, we considered secondary treatment+UF + RO + AOP or MBR + RO + AOP. These alternatives form part of a WWTP network at a district level, aiding Lima's pursuit of a circular economy approach. This perspective allows reducing environmental impacts through resource recovery, making the system more resilient to disasters and future water shortages. The methods used to assess these scenarios were Life Cycle Assessment for the environmental dimension; Life Cycle Costing for the economic perspective; and Multi-Criteria Decision Analysis to integrate both the quantitative tools aforementioned and qualitative criteria for social and techno-operational dimensions, which combined, strengthen the decision-making process. The decision-making steered towards Bardenpho for eutrophication abatement when environmental and economic criteria were prioritized or when the four criteria were equally weighted, while HF-MBR was the preferred option when techno-operational and social aspects were emphasized. In this scenario, global warming (GW) impacts ranged from 0.23 to 0.27 kg CO2eq, eutrophication mitigation varied from 6.44 to 7.29 g PO4- equivalent, and costs ranged between 0.12 and 0.17 €/m3. Conversely, HF-MBR + RO + AOP showed the best performance when IPR was sought from the outset. In the IPR scenario, GW impacts were significantly higher, at 0.46-0.51 kg CO2eq, eutrophication abatement was above 98 % and costs increased to ca. 0.44 €/m3.

Forward Osmosis Application for the Removal of Emerging Contaminants from Municipal Wastewater: A Review

Forward osmosis (FO) has attracted special attention in water and wastewater treatment due to its role in addressing the challenges of water scarcity and contamination. The presence of emerging contaminants in water sources raises concerns regarding their environmental and public health impacts. Conventional wastewater treatment methods cannot effectively remove these contaminants; thus, innovative approaches are required. FO membranes offer a promising solution for wastewater treatment and removal of the contaminants in wastewater. Several factors influence the performance of FO processes, including concentration polarization, membrane fouling, draw solute selection, and reverse salt flux. Therefore, understanding and optimizing these factors are crucial aspects for improving the efficiency and sustainability of the FO process. This review stresses the need for research to explore the potential and challenges of FO membranes to meet municipal wastewater treatment requirements, to optimize the process, to reduce energy consumption, and to promote scalability for potential industrial applications. In conclusion, FO shows promising performance for wastewater treatment, dealing with emerging pollutants and contributing to sustainable practices. By improving the FO process and addressing its challenges, we could contribute to improve the availability of water resources amid the global water scarcity concerns, as well as contribute to the circular economy.

Mapping and visualizing of research output on waste management and green technology: A bibliometric review of literature

The transition to a circular economy (CE) and environmental protection highly depends on waste management (WM) and green technology (GT). The purpose of this study is to examine the past two decades of WM and GT research to identify the most significant advancements and potential future research areas. Bibliometrics content analysis and text mining were utilized to resolve the subsequent issues: Has WM and GT research developed over time in the CE industry? Does WM and GT research have a clearly defined purpose? How do you foresee the future of WM and GT research in the context of CE evolving? Consequently, 1149 journal articles from the Scopus database were used to create and evaluate bibliometric networks. Therefore, five significant CE-related issues requiring additional research were identified: The first category is bio-based WM, followed by CE transition, GT, ecological impacts, municipal solid WM and lifecycle assessment, and finally, bio-based WM. Future research topics and a tool for the CE transition may be impacted by the investigation of inclusive WM systems, GT practices and their defining highlight patterns (which aim to minimalize waste generation). Future research goals include reducing waste and implementing WM into the CE framework.

Biochar production from microalgae: a new sustainable approach to wastewater treatment based on a circular economy

The generation of wastewater due to human activities are the main responsible for environmental problems. These problems are caused by the large amount of organic and inorganic pollutants related to the presence of pesticides, metals, pathogens, drugs and dyes. The photosynthetic treatment of effluents emerges as a sustainable and low-cost alternative for developing wastewater treatment systems based on a circular economy. Chemical compounds present in wastewater can be recovered and reused as a source of nutrients in microalgae cultivation to produce value-added bioproducts. The microalgal biomass produced in the cultivation with effluents has the potential to produce biochar. Biochar is carbon-rich charcoal that can be obtained by converting microalgae biomass through thermal decomposition of organic raw material under limited oxygen supply conditions. Pyrolysis, torrefaction, and hydrothermal carbonization are processes used for biochar synthesis. The application of microalgal biochar as an adsorbent material to remove several compounds present in effluents is an effective and fast treatment. This effectiveness is usually related to the unique physicochemical characteristics of the biochar, such as the presence of functional groups, ion exchange capacity, thermal stability, and high surface area, volume, and pore area. In addition, biochar can be reused in the adsorption process or applied in agriculture for soil correction. In this context, this review article describes the production, characterization, and use of microalgae biochar through a sustainable approach to wastewater treatment, emphasizing its potential in the circular economy. In addition, the article approaches the potential of microalgal biochar as an adsorbent material and its reuse after the adsorption of contaminants, as well as highlights the challenges and future perspectives on this topic.

Reuse of lime sludge from immediate one-step lime precipitation process as a coagulant (aid) in slaughterhouse wastewater treatment

The circularity of wastewater treatment subproducts is on the worldwide agenda. In this way, this work aims to evaluate alternatives for the reuse of sludge from slaughterhouse wastewater treatment. Wetted sludges produced in the immediate one-step lime precipitation process were applied directly or first calcined, as a coagulant or coagulant aid, in the absence or presence of Ca(OH)₂, to slaughterhouse wastewaters with different characteristics. For the best sludge reuse, successive reuses of the sludge were carried out and the characteristics of treated slaughterhouse wastewater were evaluated after each reuse. Results showed a great similarity between slaughterhouse and treated slaughterhouse wastewaters using wetted and calcined sludges as a coagulant for highly contaminated slaughterhouse wastewater. In addition, a great similarity was also observed between the calcined and the wetted sludges, both as a coagulant aid, for all the slaughterhouse wastewaters tested. However, the latter consumed more hydrated lime, more volume of sludge sedimented, and higher concentrations phosphorus and organic matter in the treated wastewater. Calcined sludge as a coagulant aid guaranteed the best slaughterhouse wastewater quality for almost of the tested paramenters (≥94% for absorbances at 254 nm and 410 nm, E. coli, turbidity, and phosphorus, chemical oxygen demand between 3 and 91%, and total Kjeldahl nitrogen between 3 and 62%) independently of the wastewater characteristics. Calcined sludge as a coagulant aid can be three times reused for the tested parameters and slaughterhouse wastewater characteristics without significantly decreasing the quality. The successive sludge reused saves the hydrated lime dose applied (up to 28.4%) and the sedimented sludge volume (up to 24.7%), and can be a solution to stabilize sludge due to the pH increase (sludge pH = 12).

Cationic Pullulan Derivatives Based Flocculants for Removal of Some Metal Oxides from Simulated Wastewater

Modified polysaccharides have been increasingly used as flocculants in wastewater treatment due to their non-toxicity, low price, biodegradability, etc. However, the pullulan derivatives are less used in wastewater purification processes. Therefore, this article presents some data regarding FeO and TiO₂ particle removal from model suspensions by some pullulan derivatives with pendant quaternary ammonium salt groups, trimethylammonium propyl carbamate chloride (TMAP_x-P). The influence of the polymer ionic content, dose, and initial solution concentration as well as of the dispersion pH and composition (metal oxide content, salts, and kaolin) on the separation efficacy were considered. UV-Vis spectroscopy measurements have shown a very good removal efficacy of TMAP_x-P for the FeO particles (around 95% and more), irrespective of the polymer and suspension characteristics; a lower clarification of the TiO₂ particles suspension (removal efficiency between 68% and 75%) was noticed. Both the zeta potential and the particle aggregates size measurements revealed the charge patch as the main mechanism which governs the metal oxide removal process. The surface morphology analysis/EDX data provided supplementary evidence regarding the separation process. A good removal efficiency (90%) of the pullulan derivatives/FeO flocs for the Bordeaux mixture particles from simulated wastewater was found.

Enhanced sustainable integration of CO2 utilization and wastewater treatment using microalgae in circular economy concept

Microalgae have been shown to have a promising potential for CO₂ utilization and wastewater treatment which still faces the challenges of high resource and energy requirements. The implementation of the circular economy concept is able to address the issues that limit the application of microalgae-based technologies. In this review, a comprehensive discussion on microalgae-based CO₂ utilization and wastewater treatment was provided, and the integration of this technology with the circular economy concept, for long-term economic and environmental benefits, was described. Furthermore, technological challenges and feasible strategies towards the improvement of microalgae cultivation were discussed. Finally, necessary regulations and effective policies favoring the implementation of microalgae cultivation into the circular economy were proposed. These are discussed to support sustainable development of microalgae-based bioremediation and bioproduction. This work provides new insights into the implementation of the circular economy concept into microalgae-based CO₂ utilization and wastewater treatment to enhance sustainable production.

Valorization of agriculture waste biomass as biochar: As first-rate biosorbent for remediation of contaminated soil

Each year, Asia produces an estimated 350 million tonnes of agricultural residues. According to Ministry of Power projections, numerous tonnes of such waste are discarded each year, in addition to being used as green manure. The methodology used to convert agricultural waste into the most valuable biochar, as well as its critical physical and chemical properties, were described in this review. This review also investigates the beneficial effects of bio and phytoremediation on metal(lloid)-contaminated soil. Agriculture biomass-based biochar is an intriguing organic residue material with the potential to be used as a responsible solution for metal(lloid) polluted soil remediation and soil improvement. Plants with faster growth and higher biomass can meet massive remediation demands. Recent research shows significant progress in agricultural biomass-based biomass conversion as biochar, as well as understanding the frameworks of metal(lloid) accumulation and mobility in plants used for metal(lloid) polluted soil remediation. Biochar made from various agricultural biomass can promote native plant growth and improve phytoremediation efficiency in polluted soil with metal(lloid)s. This carbon-enriched biochar promotes native microbial activity by neutralising pH and providing adequate nutrition. Thus, this review critically examines the feasibility of converting agricultural waste biomass into biochar, as well as the impact on plant and microbe remediation potential in metal(lloid)s polluted soil.

The benefits of circular economy strategies in urban water facilities

Circular economy has become a very popular item in the last decades in many fields. Particularly, in the water and wastewater sector, since a lot of pressure has been put on water resources. Although the main target of the application of circular economy in this sector has been waste management, the current research intends to extend its application to other aspects. In this sense, it is highlighted the role that asset management could play in wastewater treatments plants extending the useful life of the equipment and the facilities, and how it could contribute to the circular economy, measuring the impact in economic and environmental terms. Making use of the Analytical Hierarchy Process (AHP) it can be observed that maintenance tasks are one of the most important factors to avoid equipment deterioration. This research offers valuable results that will be useful to assess the condition of the equipment helping the decision-makers to optimize the maintenance tasks and plan replacement strategies that will lead to accomplishing the principles of circular economy, increasing the service life span of the equipment, and reducing the repairing costs, and minimizing the environmental impact associated to the replacement of the equipment.

Water reuse in industries: analysis of opportunities in the Paraíba do Sul river basin, a case study in Presidente Vargas Plant, Brazil

In recent years, the demand for clean water has been growing all over the world despite the different threats posed, including increasing pollution, increasing deforestation and climate change. Industrial activity is the second largest consumer of water, so highly industrialized regions are more susceptible to water stress. In this sense, reuse strategies have been progressively discussed and used around the world; however, in Brazil there is still place for many advances, whether due to lack of incentives, cultural issues in society, or poor regulation of the subject. The objective of this work was to carry out a diagnosis of raw water uptake by industries in one Hydrographic Region of the state of Rio de Janeiro and to propose a discussion on the adoption of water reuse practices for non-potable purposes from the use of treated effluents. A survey of the theoretical framework on the subject was carried out, as well as an analysis of sustainability indicators and reports of the companies, including the current licensing processes of large undertakings consuming water resources. With this study, it was possible to obtain the average cost of implementing a water reuse unit for an industry in the state of Rio de Janeiro-Brazil, which, despite still being expensive, has a strong tendency to use due to world water shortages. Finally, it was concluded that the state of Rio de Janeiro has a threat of water scarcity that could be aggravated in the coming years, if measures and investments in supply alternatives are not adopted (water reuse), and improvement in all stages of water management water resources.

Energy-Efficient AnMBRs Technology for Treatment of Wastewaters: A Review

In recent years, anaerobic membrane bioreactor (AnMBRs) technology, a combination of a biological reactor and a selective membrane process, has received increasing attention from both industrialists and researchers. Undoubtedly, this is due to the fact that AnMBRs demonstrate several unique advantages. Firstly, this paper addresses fundamentals of the AnMBRs technology and subsequently provides an overview of the current state-of-the art in the municipal and domestic wastewaters treatment by AnMBRs. Since the operating conditions play a key role in further AnMBRs development, the impact of temperature and hydraulic retention time (HRT) on the AnMBRs performance in terms of organic matters removal is presented in detail. Although membrane technologies for wastewaters treatment are known as costly in operation, it was clearly demonstrated that the energy demand of AnMBRs may be lower than that of typical wastewater treatment plants (WWTPs). Moreover, it was indicated that AnMBRs have the potential to be a net energy producer. Consequently, this work builds on a growing body of evidence linking wastewaters treatment with the energy-efficient AnMBRs technology. Finally, the challenges and perspectives related to the full-scale implementation of AnMBRs are highlighted.

Technical advances on current research trends and explore the future scope on nutrient recovery from waste-streams: a review and bibliometric analysis from 2000 to 2020

An exponentially growing global population has led to an increase in nutrient pollution in different aqueous bodies. Although different processes have successfully removed nutrients from wastewater on a large scale, a limited number of studies have been reported on efficiency, cost-effectiveness, and future potential of physical, chemical, and biological nutrient recovery methods to overcome the depletion of natural resources. Therefore, researchers need to understand current research trends by applying different approaches to investigate higher efficient nutrient recovery technologies. In this article, the research patterns and in-depth review of various nutrient recovery processes have been circumscribed with the application of bibliometric and attractive index (AAI) vs. activity index (AI) analysis. The performance, advantages, limitations, and future prospects of different nutrient recovery methods have also been addressed. More than 70% of study publications were published in the last decade in chemical and biological processes, which might be related to more rigorous effluent quality rules and increasing water pollution. The future prediction in the field of nutrient recovery has been predicted using S-curve analysis, and it was found that the number of publications in the saturated state in chemical methods was highest. However, the growth rate of the biological-based nutrient recovery methods is greater, which may be because of their huge research scope, cost-effectiveness, and easy operation methods. This study can assist researchers in understanding the current research scenario in nutrient recovery techniques and provide the research scope in nutrient recovery from wastewater in the future.

Non-technical dimensions of communal wastewater treatment plant sustainability in peri-urban Yogyakarta, Indonesia

Background: This study focuses on identifying non-technical aspects that influence the sustainability of communal wastewater treatment plants (WWTPs) in a peri-urban area of Indonesia. Methods: A questionnaire survey was conducted by random sampling using a method of descriptive analysis that combines qualitative and quantitative approaches. Economic support for communal WWTPs was measured by the community’s Willingness to Pay (WTP) and Ability to Pay (ATP). Results: The results indicate that social dimension, such as a community’s level of participation are critically important in sustaining communal WWTPs. In addition, institutional dimension influences the degree of satisfaction a community has toward the WWTP management. This support is reinforced by social capital in the form of a philosophy of mutual cooperation, like gotong royong (cooperation by members of a community to achieve a common goal) and swadaya (self-reliance). Conclusions: The findings of this study can be used in Indonesia to make policy recommendations for managing and ensuring sustainability of communal WWTPs on a non-technical dimension. Additionally, gotong royong deserves to be promoted internationally as a fundamental value for fostering participation and contribution.

Appraising water and nutrient recovery for perennial crops irrigated with reclaimed water in Mediterranean areas through an index-based approach

The use of reclaimed water for agricultural irrigation is among the agronomic practices being increasingly valued by policy-makers, water planners, and regulators to pursue more sustainable resource management in many arid and semi-arid agricultural production areas worldwide. This practice can make additional supply available in water-scarce areas, provide crop nutrients, and reduce the disposal of wastewater to the environment, thus providing considerable agronomic and environmental benefits. However, the process for treated wastewater reuse is complex because of multiple interactions among technical, economic, environmental, and public health related aspects. In this context, the application of quantitative indices capturing agronomic, engineering, and environmental factors and their possible inter-relations enable to appraise the potential benefits and risks of treated wastewater reuse at individual project's scale and for regional policies. The present article describes a quantitative approach that utilizes a set of proposed indices to characterize various aspects affecting water and nutrient recovery for specific combinations between the characteristics of the treatment facility and the attributes of the irrigation district supplied with reclaimed water. The proposed index-based approach was tested on datasets collected for 11 pilot reuse schemes located in the Apulia region of southern Italy with the aim to evaluate the potential for water and nutrient recovery resulting from irrigation with reclaimed water. Results from the data analysis and interpretation showed that the proposed indices enabled to quantify the environmental benefits of irrigation with RW that leads to divert less freshwater from conventional sources and dispose less reclaimed water into natural water receptors, as well as the agronomic advantages of using RW, which can partially fulfill the irrigation and nutrient requirements for the supplied districts' service areas. Overall, the proposed set of indices can provide valuable information for the successful implementation of water reuse policies for irrigated agriculture.

Situation Analysis and the Potential for Circularity of the Wastewater Sector in Lithuania

The concept of circular economy is one of the priority areas for economic development on which the current environmental policy of the European Union is based. Most existing European wastewater treatment plants were built and operated according to the concept of linear economy where wastewater and sewage sludge were considered as waste only. In fact, there is a wide range of possibilities to use them as a resource to recover materials and energy. Implementation of the concept of circular economy in a relatively small country requires a great deal of additional research and monitoring to assess the available potential. In this paper, data on municipal wastewater in agglomerations larger than population equivalent of 2000 were analyzed, and the situation is presented through indicators covering prevention, removal, reuse, recycling, and recovery. The novelty of this article is that it evaluates the circularity of Lithuanian wastewater treatment plants and their potential for the future. Thus far, the wastewater sector in the country has been found to largely comply with legal obligations, but very few solutions of circularity were found to be implemented.

Ecological Risk Evaluation and Removal of Emerging Pollutants in Urban Wastewater by a Hollow Fiber Forward Osmosis Membrane

Forward osmosis (FO) is a promising technology for the treatment of urban wastewater. FO can produce high-quality effluents and preconcentrate urban wastewater for subsequent anaerobic treatment. This membrane technology makes it possible to eliminate the pollutants present in urban wastewater, which can cause adverse effects in the ecosystem even at low concentrations. In this study, a 0.6 m2 hollow fiber aquaporin forward osmosis membrane was used for the treatment of urban wastewater from the Valladolid wastewater treatment plant (WWTP). A total of 51 Contaminants of Emerging Concern (CECs) were investigated, of which 18 were found in the target urban wastewater. They were quantified, and their ecotoxicological risk impact was evaluated. Different salts with different concentrations were tested as draw solutions to evaluate the membrane performances when working with pretreated urban wastewater. NaCl was found to be the most appropriate salt since it leads to higher permeate fluxes and lower reverse saline fluxes. The membrane can eliminate or significantly reduce the pollutants present in the studied urban wastewater, producing water without ecotoxicological risk or essentially free of pollutants. In all cases, good recovery was achieved, which increased with molecular weight, although chemical and electrostatic interactions also played a role.

Indicators for resource recovery monitoring within the circular economy model implementation in the wastewater sector

The European Union is currently in the process of transformation toward a circular economy model in which different areas of activity should be integrated for more efficient management of raw materials and waste. The wastewater sector has a great potential in this regard and therefore is an important element of the transformation process to the circular economy model. The targets of the circular economy policy framework such as resource recovery are tightly connected with the wastewater treatment processes and sewage sludge management. With this in view, the present study aims to review existing indicators on resource recovery that can enable efficient monitoring of the sustainable and circular solutions implemented in the wastewater sector. Within the reviewed indicators, most of them were focused on technological aspects of resource recovery processes such as nutrient removal efficiency, sewage sludge processing methods and environmental aspects as the pollutant share in the sewage sludge or its ashes. Moreover, other wide-scope indicators such as the wastewater service coverage or the production of bio-based fertilizers and hydrochar within the wastewater sector were analyzed. The results were used for the development of recommendations for improving the resources recovery monitoring framework in the wastewater sector and a proposal of a circularity indicator for a wastewater treatment plant highlighting new challenges for further researches and wastewater professionals.

Greywater characteristics, impacts, treatment, and reclamation using adsorption processes towards the circular economy

The gap between water demand and available water supply led to wastewater treatment, particularly greywater. Due to specific characteristics of grey wastewater, treatment and recycling of this type of wastewater capture global attention. This paper presents a literature review of the remediation of greywater by adsorption processes. Besides, the reclamation of the grey wastewater in the context of the circular economy is highlighted. In this regard, the characterization of various types of grey wastewater, the potential risks associated with greywater, and the properties of reclaimed water as per the regulation or guideline are summarized. These standards vary based on the application of reused water and from a country to another country. Furthermore, this review elucidates the adsorption process in terms of the type of adsorbents, modification of adsorbents and their regeneration process, adsorption isotherm, kinetics and thermodynamic of adsorption, and optimization of adsorption system. Finally, the removal of different pollutants from greywater by various adsorbents and techno-economic aspects are illustrated.

On-line 2D-RPLC x RPLC - HRMS to assess wastewater treatment in a pharmaceutical plant

Pharmaceutical effluents are complex media containing hundreds of compounds including active ingredients, intermediate products and unknown impurities. Bringing an industrial wastewater treatment plant (WWTP) into compliance with European directives requires a thorough analysis of the effluent. In this study, we demonstrate how online comprehensive two-dimensional liquid chromatography (on-line LC × LC) hyphenated to high resolution mass spectrometry (HRMS) can be a powerful analytical methodology to monitoring the outlet water, by analysing the content of known molecules while characterizing unknown compounds. Reversed phase liquid chromatography (RPLC) was used in both dimensions, with a penta-fluoro-phenyl silica-based column at neutral pH in the first dimension (¹D) and a C18 column at acidic pH in the second one (²D). The conditions were optimized for a total analysis time of 60 min. The variability of both retention times and peak areas was evaluated. The average standard deviation on retention times was found to be less than 0.1 s in ²D. The relative standard deviation on peak area was about 7% for run-to-run analysis. This analytical approach, applied to the pharmaceutical effluents before (inlet) and after (outlet) wastewater treatment permitted to detect 240 compounds. These included 27 priority pharmaceutical products, 8 of which were of very high priority and their concentrations could be compared to target values. The comparison of 2D-LC and 1D-LC approaches clearly highlights the power of on-line RPLC x RPLC technique, which allows both targeted quantitative analysis and non-targeted qualitative analysis of pharmaceutical effluents.

Management of Urban Waters with Nature-Based Solutions in Circular Cities—Exemplified through Seven Urban Circularity Challenges

Nature-Based Solutions (NBS) have been proven to effectively mitigate and solve resource depletion and climate-related challenges in urban areas. The COST (Cooperation in Science and Technology) Action CA17133 entitled “Implementing nature-based solutions (NBS) for building a resourceful circular city” has established seven urban circularity challenges (UCC) that can be addressed effectively with NBS. This paper presents the outcomes of five elucidation workshops with more than 20 European experts from different backgrounds. These international workshops were used to examine the effectiveness of NBS to address UCC and foster NBS implementation towards circular urban water management. A major outcome was the identification of the two most relevant challenges for water resources in urban areas: ‘Restoring and maintaining the water cycle’ (UCC1) and ‘Water and waste treatment, recovery, and reuse’ (UCC2). s Moreover, significant synergies with ‘Nutrient recovery and reuse’, ‘Material recovery and reuse’, ‘Food and biomass production’, ‘Energy efficiency and recovery’, and ‘Building system recovery’ were identified. Additionally, the paper presents real-life case studies to demonstrate how different NBS and supporting units can contribute to the UCC. Finally, a case-based semi-quantitative assessment of the presented NBS was performed. Most notably, this paper identifies the most typically employed NBS that enable processes for UCC1 and UCC2. While current consensus is well established by experts in individual NBS, we presently highlight the potential to address UCC by combining different NBS and synergize enabling processes. This study presents a new paradigm and aims to enhance awareness on the ability of NBS to solve multiple urban circularity issues.

Physico-chemical and biological treatment strategies for converting municipal wastewater and its residue to resources

An increase in urbanization and industrialization has not only contributed to an improvement in the lifestyle of people, but it has also contributed to a surge in the generation of wastewater. To date, conventional physico-chemical and biological treatment methods are widely used for the treatment of wastewater. However, the efficient operation of these systems require substantial operation and maintenance costs, and the application of novel technologies for the treatment and disposal of sludge/residues. This review paper focuses on the application of different treatment options such as chemical, catalyst-based, thermochemical and biological processes for wastewater or sludge treatment and membrane-based technologies (i.e. pressure-driven and non-pressure driven) for the separation of the recovered products from wastewater and its residues. As evident from the literature, a wide variety of treatment and resource recovery options are possible, both from wastewater and its residues; however, the lack of planning and selecting the most appropriate design (treatment train) to scale up from pilot to the field scale has limited its practical application. The economic feasibility of the selected technologies was critically analyzed and the future research prospects of resource recovery from wastewater have been outlined in this review.

Insights into the potential impact of algae-mediated wastewater beneficiation for the circular bioeconomy: A global perspective

Algae-based technologies are one of the emerging solutions to societal issues such as accessibility to clean water and carbon-neutral energy and are a contender for the circular bioeconomy. In this review, recent developments in the use of different algal species for nutrient recovery and biomass production in wastewater, challenges, and future perspectives have been addressed. The ratio and bioavailability of nutrients in wastewater are vital parameters, which significantly impact nutrient recovery efficiency and algal biomass production. However, the optimum nutrient concentration and ratio may vary depending upon the microalgal species as well as cultivation conditions. The use of indigenous algae and algae-based consortia with other microorganisms has been proved promising in improving nutrient recovery efficiency and biomass production in pilot scale operations. However, environmental and cultivation conditions also play a significant role in determining the feasibility of the process. This review further focused on the assessment of the potential benefits of algal biomass production, renewable biofuel generation, and CO₂ sequestration using wastewater in different countries on the basis of available data on wastewater generation and estimated nutrient contents. It was estimated that 5-10% replacement of fossil crude requirement with algal biofuels would require ~952-1903 billion m³ of water, 10-21 billion tons of nitrogen, and 2-4 billion tons of phosphorus fertilizers. In this context, coupling wastewater treatment and algal biomass production seem to be the most sustainable option with potential global benefits of polishing wastewater through nutrients recycling and carbon dioxide sequestration.

Wastewater Treatment Plants in Mediterranean Spain: An Exploration of Relations between Water Treatments, Water Reuse, and Governance

Wastewater treatment plants (WWTPs) are fundamental to enable the transition towards the principles of a circular economy in water supply. In Mediterranean Spain, an area with recurrent episodes of water stress, treated wastewater may become a critical resource for the future. However, its incorporation into the array of potential water options opens up questions regarding the different qualities obtained with each treatment, the extent of existing water reuse practices, or the governance regime of plants. In this paper, the state of WWTPs in Mediterranean Spain is analyzed, with focus on plant sizes, treatment technologies, water use, and governance regimes. The latter shows a strong presence of private WWTPs and a lesser extent of public–private WWTPs, while the number of public plants is small. Regarding treatment technologies, the most sophisticated systems are found in public–private plants that are also the largest in size. Reclaimed water is very significant for agricultural and golf course irrigation in some areas (Valencia, Murcia, Andalusia), but still relatively incipient for other uses.

Energy Self-Sufficiency Aiming for Sustainable Wastewater Systems: Are All Options Being Explored?

In upcoming years, water demand is expected to boost worldwide, and with that, wastewater generation and the required energy for treatment. Provided that efficiency measures should be implemented at first instance, developments of renewable energy technologies are needed to improve sustainability at wastewater treatment plants (WWTPs). Based on theoretical analyses of literature data, this article presents a novel perspective of the role that hydropower could play in that energy framework. This research applied a new approach compared to previous studies, considering the introduction of sustainability aspects in the decision-making process, other than economic feasibility. With that aim, a broad search of real case studies was conducted, and suitable Key Performance Indicators based on the energy self-sufficiency concept were selected and applied to the identified cases. The findings suggest that there is not a rule of thumb to determine feasibility for hydropower installation and this technology might deserve more attention. This new perspective can help to raise awareness among policy makers, decision managers, or plant operators, of the possibilities hydropower could offer to the wastewater industry in the pathway towards more sustainable systems.

Biobased and Eco-Compatible Beauty Films Coated with Chitin Nanofibrils, Nanolignin and Vitamin E

A stable water-based suspension containing chitin nanofibrils (CN), chitin nanofibrils complexed with nanolignin and the latter containing Vitamin E was prepared starting from CN nanosuspension and nanostructured powders. The water-based coating was deposited by a spray technique on three different renewable and biodegradable films consisting of biodegradable polyesters and starch to prepare possible beauty mask prototypes. After drying, the films were extracted with water to control their potential release on the wet skin and different amounts of released materials were obtained. The results were discussed considering the composition and morphology of the adopted substrates and their interactions with the coating. The eco-compatibility of these films is related to the absence of preservatives and their easy biodegradability in several environmental conditions, decreasing their burden on solid waste management with respect to fossil-based versions.

Optimal Solutions for the Use of Sewage Sludge on Agricultural Lands

The use of sewage sludge in agriculture decreases the pressure on landfills. In Romania, massive investments have been made in wastewater treatment stations, which have resulted in the accumulation of important quantities of sewage sludge. The presence of these sewage sludges coincides with large areas of degraded agricultural land. The aim of the present article is to identify the best technological combinations meant to solve these problems simultaneously. Adapting the quality and parameters of the sludge to the specificity of the land solves the possible compatibility problems, thus reducing the impact on the environment. The physico-chemical characteristics of the fermented sludge were monitored and optimal solutions for their treatment were suggested so as to allow that the sludge could be used in agriculture according to the characteristics of the soils. The content of heavy metals in the sewage sludge was closely monitored because the use of sewage sludge as a fertilizer does not allow for any increases in the concentrations of these in soils. The article identifies those agricultural areas which are suitable for the use of sludge, as well as ways of correcting some parameters (e.g., pH), which allow the improvement of soil quality and obtained higher agricultural production.

Urban and Industrial Wastewater Disinfection and Decontamination by Advanced Oxidation Processes (AOPs): Current Issues and Future Trends

Without any doubt, the 21st century has kick-started a great evolution in all aspects of our everyday life [...]

Demand-Response Application in Wastewater Treatment Plants Using Compressed Air Storage System: A Modelling Approach

Wastewater treatment plants (WWTPs) are known to be one of the most energy-intensive industrial sectors. In this work, demand response was applied to the biological phase of wastewater treatment to reduce plant electricity cost, considering that the daily peak in flowrate typically coincides with the maximum electricity price. Compressed air storage system, composed of a compressor and an air storage tank, was proposed to allow energy cost reduction. A multi-objective modelling approach was applied by analyzing different scenarios (with and without anaerobic digestion, AD), considering both plant characteristics (in terms of treated flowrate and influent chemical oxygen demand, COD, concentration) and storage system properties (volume, air pressure), together with the current Italian market economic conditions. The results highlight that air tank volume has a strong positive influence on the obtainable economic savings, with a less significant impact held by air pressure, COD concentration and flowrate. In addition, biogas exploitation from AD led to an improvement in economic indices. The developed model is highly flexible and can be applied to different WWTPs and market conditions.