Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

Romanowsky staining: history, recent advances and future prospects from a chemistry perspective

Romanowsky staining was an important methodological breakthrough in diagnostic hematology and cytopathology during the late 19th and early 20th centuries; it has facilitated for decades the work of biologists, hematologists and pathologists working with blood cells. Despite more than a century of studying Romanowsky staining, no systematic review has been published that explains the chemical processes that produce the "Romanowsky effect" or "Romanowsky-Giemsa effect" (RGE), i.e., a purple coloration arising from the interaction of an azure dye with eosin and not due merely to their simultaneous presence. Our review is an attempt to build a bridge between chemists and biomedical scientists and to summarize the available data on methylene blue (MB) demethylation as well as the related reduction and decomposition of MB to simpler compounds by both light and enzyme systems and microorganisms. To do this, we analyze modern data on the mechanisms of MB demethylation both in the presence of acids and bases and by disproportionation due to the action of light. We also offer an explanation for why the RGE occurs only when azure B, or to a lesser extent, azure A is present by applying experimental and calculated physicochemical parameters including dye-DNA binding constants and electron density distributions in the molecules of these ligands. Finally, we discuss modern techniques for obtaining new varieties of Romanowsky dyes by modifying previously known ones. We hope that our critical literature study will help scientists understand better the chemical and physicochemical processes and mechanisms of cell staining with such dyes.

Monitoring Photo-Fenton and Photo-Electro-Fenton process of contaminants emerging concern by a gas diffusion electrode using Ca10-xFex-yWy(PO4)6(OH)2 nanoparticles as heterogeneous catalyst

The catalytic performance of modified hydroxyapatite nanoparticles, Ca10-xFex-yWy(PO4)6(OH)2, was applied for the degradation of methylene blue (MB), fast green FCF (FG) and norfloxacin (NOR). XPS analysis pointed to the successful partial replacement of Ca by Fe. Under photo-electro-Fenton process, the catalyst Ca4FeII1·92W0·08FeIII4(PO4)6(OH)2 was combined with UVC radiation and electrogenerated H2O2 in a Printex L6 carbon-based gas diffusion electrode. The application of only 10 mA cm-2 resulted in 100% discoloration of MB and FG dyes in 50 min of treatment at pH 2.5, 7.0 and 9.0. The proposed treatment mechanism yielded maximum TOC removal of ∼80% and high mineralization current efficiency of ∼64%. Complete degradation of NOR was obtained in 40 min, and high mineralization of ∼86% was recorded after 240 min of treatment. Responses obtained from LC-ESI-MS/MS are in line with the theoretical Fukui indices and the ECOSAR data. The study enabled us to predict the main degradation route and the acute and chronic toxicity of the by-products formed during the contaminants degradation.

Controlling nanoparticle placement in Au/TiO2 inverse opal photocatalysts

Gold nanoparticle-loaded titania (Au/TiO2) inverse opals are highly ordered three-dimensional photonic structures with enhanced photocatalytic properties. However, fine control over the placement of the Au nanoparticles in the inverse opal structures remains challenging with traditional preparative methods. Here, we present a multi-component co-assembly strategy to prepare high-quality Au/TiO2 inverse opal films in which Au nanoparticles are either located on, or inside the TiO2 matrix, as verified using electron tomography. We report that Au nanoparticles embedded in the TiO2 support exhibit enhanced thermal and mechanical stability compared to non-embedded nanoparticles that are more prone to both leaching and sintering.

Nanocellulose/Nanoporous Silicon Composite Films as a Drug Delivery System

Nanocellulose (NC) is a promising material for drug delivery due to its high surface area-to-volume ratio, biocompatibility, biodegradability, and versatility in various formats (nanoparticles, hydrogels, microspheres, membranes, and films). In this study, nanocellulose films were derived from "Bolaina blanca" (Guazuma crinita) and combined with nanoporous silicon microparticles (nPSi) in concentrations ranging from 0.1% to 1.0% (w/v), using polyvinyl alcohol (PVA) as a binding agent to create NC/nPSi composite films for drug delivery systems. The physicochemical properties of the samples were characterized using UV-Vis spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The mechanical properties and drug release capabilities were also evaluated using methylene blue (MB) as an antibacterial drug model. Antibacterial assays were conducted against S. aureus and E. coli bacteria. The results show that NC/nPSi composites with 1% nPSi increased the T50% by 10 °C and enhanced mechanical properties, such as a 70% increase in the elastic modulus and a 372% increase in elongation, compared to NC films. Additionally, MB released from NC/nPSi composites effectively inhibited the growth of both bacteria. It was also observed that the diffusion coefficients were inversely proportional to the % nPSi. These findings suggest that this novel NC/nPSi-based material can serve as an effective controlled drug release system.

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

Carbon Free Radical (R⋅) Inactivates NF-κB for Radical Capping Therapy

Inactivating hyperactivated transcription factors can overcome tumor therapy resistance, but their undruggable features limit the development of conventional inhibitors. Here, we report that carbon-centered free radicals (R⋅) can inactivate NF-κB transcription by capping the active sites in both NF-κB and DNA. We construct a type of thermosensitive R⋅ initiator loaded amphiphilic nano-micelles to facilitate intracellular delivery of R⋅. At a temperature of 43 °C, the generated R⋅ engage in electrophilic radical addition towards double bonds in nucleotide bases, and simultaneously cap the sulfhydryl residues in NF-κB through radical chain reaction. As a result, both NF-κB nuclear translocation and NF-κB-DNA binding are suppressed, leading to a remarkable NF-κB inhibition of up to 94.1 %. We have further applied R⋅ micelles in a clinical radiofrequency ablation tumor therapy model, showing remarkable NF-κB inactivation and consequently tumor metastasis inhibition. Radical capping strategy not only provides a method to solve the heat-sink effect in clinic tumor hyperthermia, but also suggests a new perspective for controllable modification of biomacromolecules in cancer therapy.

Enhancing catalyst stability: Immobilization of Cu-Fe catalyst in sodium alginate matrix for methyl orange removal via Fenton-like reaction

This study aims to enhance the stability and effectiveness of heterogeneous catalysts in Fenton-like reactions, explicitly addressing the acidity limitations inherent in traditional Fenton processes. Copper-iron was synthesized through co-precipitation, and a catalyst bead was produced from hydrogel formation. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) confirm phases in the bimetallic Copper-iron, aligning with the intended composition. Modification with alginate led to reduced metal leaching compared to the bare bimetallic counterpart, as confirmed by atomic absorption spectroscopy (AAS). Additionally, Fourier-transform infrared spectroscopy (FTIR) revealed the deactivation of alginate through the disappearance of carboxyl groups, indicating the depolymerization of the catalyst bead. Under the suggested conditions (Methyl Orange concentration of 25 mg/L, initial solution pH of 7, 2 g/L catalyst loading, concentration of hydrogen peroxide 100 mM in a 120-min reaction time), the catalyst demonstrated remarkable decolorization efficiency of Methyl Orange, achieving 97.67 %. Further highlighting its practicality, the catalyst exhibited outstanding reusability over four cycles under identical conditions, showcasing robust immobilization capabilities and sustained performance. Notably, the catalyst's magnetic properties facilitated easy separation using an external magnet. In conclusion, the developed catalyst beads offer a solution with high reusability, magnetic separability, and reduced iron leaching. The advantageous characteristics underscore its potential as a heterogeneous catalyst for wastewater treatment applications, warranting further exploration under practical conditions.

Performance and Environmental Assessment of Biochar-Based Membranes Synthesized from Traditional and Eco-Friendly Solvents

Water contamination resulting from coal spills is one of the largest environmental problems affecting communities in the Appalachia Region of the United States. This coal slurry contains potentially toxic substances, such as hydrocarbons, heavy metals, and coal cleaning chemicals, and its leakage into water bodies (lakes, rivers, and aquifers) can lead to adverse health effects not only for freshwater bodies and plant life but also for humans. This study focused on two major experiments. The first experiment involved the use of biochar to create a biochar-polysulfone (BC-PSf) flat-sheet multifunctional membrane to remove organic contaminants, and the other major experiment compared eco-friendly (gamma-valerolactone-GVL; Rhodiasolv® PolarClean-PC) and petroleum-derived solvents (i.e., N-methyl-pyrrolidone-NMP) in the fabrication of the biochar-polysulfone membranes. The resulting membranes were tested for their efficiency in removing both positively and negatively charged organic contaminants from the collected water at varying pH values. A comparative life cycle assessment (LCA) with accompanying uncertainty and sensitivity analyses was carried out to understand the global environmental impacts of incorporating biochar, NMP, GVL, and PC in the synthesis of PSf/NMP, BC-PSf/NMP, PSf/GVL, BC-PSf/GVL, PSf/PC, and BC-PSf/PC membranes at a set surface area of 1000 m2. The results showed that the addition of biochar to the membrane matrix increased the surface area of the membranes and improved both their adsorptive and mechanical properties. The membranes with biochar incorporated in their matrix showed a higher potential for contaminant removal than those without biochar. The environmental impacts normalized to the BC-PSf/GVL membrane showed that the addition of biochar increased global warming impacts, eutrophication, and respiratory impacts by over 100% in all the membrane configurations with biochar. The environmental impacts were highly sensitive to biochar addition (Spearman's coefficient > 0.8). The BC/PSf membrane with Rhodiasolv® PolarClean had the lowest associated global environmental impacts among all the membranes with biochar. Ultimately, this study highlighted potential tradeoffs between functional performance and global environmental impacts regarding choices for membrane fabrication.

Sensitive, Stable, and Recyclable ZnO/Ag Nanohybrid Substrates for Surface-Enhanced Raman Scattering Metrology

Surface-enhanced Raman scattering is a practical, noninvasive spectroscopic technique that measures chemical fingerprints for varieties of molecules in multiple applications. However, synthesizing appropriate substrates for practical, long-term applications of this method has always been a challenging task. In the present study, we show that ZnO/Ag nanohybrid substrates may act as highly stable, sensitive, and recyclable substrates for surface-enhanced Raman scattering, as illustrated by the detection of methylene blue, selected as a test dye molecule with self-cleaning functionalities. Specifically, we demonstrate the detection enhancement factor of 3.7 × 107 along with exceptional long-term stability explained in terms of the localized surface plasmon resonance from the Ag nanocrystals embedded into the chemically inert ZnO nanoparticles, constituting the nanohybrid. Significantly, these substrates can be efficiently cleaned and regenerated while maintaining their high performance upon recycling. As a result, using these substrates, up to 10-12 M detection sensitivity has been demonstrated, enabling the accuracy required in modern environmental monitoring, bioassays, and analytical chemistry. Thus, ZnO nanoparticles with embedded Ag nanocrystals constitute a novel class of advanced nanohybrid substrates for use in multiple applications of surface-enhanced Raman scattering metrology.

Enhancing the Concentration Capability of Nonsupported Electrically Driven Liquid-Phase Microextraction through Programmable Flow Using an All-In-One 3D-Printed Optosensor: A Proof of Concept

A versatile millifluidic 3D-printed inverted Y-shaped unit (3D-YSU) was prototyped to ameliorate the concentration capability of nonsupported microelectromembrane extraction (μ-EME), exploiting optosensing detection for real-time monitoring of the enriched acceptor phase (AP). Continuous forward-flow and stop-and-go flow modes of the donor phase (DP) were implemented via an automatic programmable-flow system to disrupt the electrical double layer generated at the DP/organic phase (OP) interface while replenishing the potentially depleted layers of analyte in DP. To further improve the enrichment factor (EF), the organic holding section of the OP/AP channel was bifurcated to increase the interfacial contact area between the DP and the OP. Exploiting the synergistic assets of (i) the continuous forward-flow of DP (1050 μL), (ii) the unique 3D-printed cone-shaped pentagon cross-sectional geometry of the OP/AP channel, (iii) the bifurcation of the OP that creates an inverted Y-shape configuration, and (iv) the in situ optosensing of the AP, a ca. 24 EF was obtained for a 20 min extraction using methylene blue (MB) as a model analyte. The 3D-YSU was leveraged for the unsupervised μ-EME and the determination of MB in textile dye and urban wastewater samples, with relative recoveries ≥88%. This is the first work toward analyte preconcentration in μ-EME with in situ optosensing of the resulting extracts using 3D-printed millifluidic platforms.

Surface Modifications of Superparamagnetic Iron Oxide Nanoparticles with Chitosan, Polyethylene Glycol, Polyvinyl Alcohol, and Polyvinylpyrrolidone as Methylene Blue Adsorbent Beads

Due to the negative impacts the dye may have on aquatic habitats and human health, it is often found in industrial effluent and poses a threat to public health. Hence, to solve this problem, this study developed magnetic adsorbents that can remove synthetic dyes like methylene blue. The adsorbent, in the form of beads, consists of a polymer blend of chitosan, polyethylene glycol, polyvinyl alcohol, polyvinylpyrrolidone, and superparamagnetic iron oxide nanoparticles (average size of 19.03 ± 4.25 nm). The adsorption and desorption of MB from beads were carried out at pH values of 7 and 3.85, respectively. At a concentration of 9 mg/L, the loading capacity and the loading amount of MB after 5 days peaked at 29.75 ± 1.53% and 297.48 ± 15.34 mg/g, respectively. Meanwhile, the entrapment efficiency of MB reached 29.42 ± 2.19% at a concentration of 8 mg/L. The cumulative desorption capacity of the adsorbent after 13 days was at its maximum at 7.72 ± 0.5%. The adsorption and desorption kinetics were evaluated.

The effective treatment of dye-containing simulated wastewater by using the cement kiln dust as an industrial waste adsorbent

This study compares the adsorption behavior of both Methylene Blue (MB) and Congo Red (CR) dyes on the surfaces of cement kiln dust (CKD) powder from the experimentally simulated wastewater solution. The cement kiln dust powder was characterized using X-ray Fluorescence (XRF), X-ray diffraction (XRD), N2 adsorption-desorption Brunauer-Emmett-Teller (BET), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy (SEM) tests. The adsorption for such dyes was studied under varying mixing contact times, temperatures, and pH as well as various initial concentrations of both dyes and adsorbent using the batch mode experiments. Pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were applied, and the results revealed that the pseudo-second-order fitted well to the kinetic data. Thermodynamic parameters stated that the adsorption process was endothermic. Studying Linear and nonlinear forms of Langmuir and Freundlich's adsorption isotherms revealed that the adsorption process was followed by both homogeneous mono-layer and heterogeneous multilayer coverage on the active sites of cement kiln dust particles. The data showed that the adsorption capacities of the methylene blue and Congo red dyes were 58.43 and 123.42 mg/g, respectively and cement kiln dust is an adsorbent with little cost for the treatment of wastewater.

Bionanocomposite MIL-100(Fe)/Cellulose as a high-performance adsorbent for the adsorption of methylene blue

World production of dyes is estimated at more than 800,000 t·yr-1. The purpose of this research falls within the scope of the choice of an effective, local, and inexpensive adsorbent to remove dyes from wastewater. Adsorptive elimination of dyes by commonly accessible adsorbents is inefficient. The metal-organic frameworks (MOFs) are an important class of porous materials offering exceptional properties as adsorbents by improving separation efficiency compared to existing commercial adsorbents. However, its powder form limits its applications. One way to overcome this problem is to trap them in a flexible matrix to form a hierarchical porous composite. Therefore, in this work, we prepared MIL-100 (Fe) embedded in a cellulose matrix named MIL-100(Fe)/Cell, and used it as an adsorbent of methylene blue (MB) dye. According to the BET analysis, the specific surface area of the synthesized MOF is 294 m2/g which is related to the presence of the cellulose as efficient and green support. The structure of this composite is approximately hexagonal. Adsorption was studied as a function of contact time, adsorbent mass and pollutant load (concentration), and pH, and the effect of each of them on absorption efficiency was optimized. The MIL-100(Fe)/Cell was capable of removing 98.94% of MB dye with an initial concentration of 150 mg/L within 10 min at pH = 6.5 and room temperature. The obtained maximum adsorption capacity was 384.615 mg/g. The adsorption isotherm is consistent with the Langmuir models. The mechanism of MB adsorption proceeds through п-п and electrostatic interactions.

Evaluation of Methylene Blue Migration from Time-Temperature Indicators Using LC-MS/MS

The purpose of this study was to evaluate and validate methylene blue migration from printed time-temperature indicators (TTIs) into food. It also highlights the importance of establishing regulatory measures and safety standards for food packaging, suggesting that this can contribute to improving food packaging safety. Liquid chromatography-mass spectrometry (LC-MS/MS) was used to quantify methylene blue migration in various food simulant and food matrix samples. The results show that the level of methylene blue migration varies significantly depending on the chemical properties of the food mimetic and the composition of the food matrix. The established method demonstrated a high sensitivity, with limits of detection (LODs) of 0.0019-0.0706 μg/L (kg) and limits of quantification (LOQs) of 0.0057-0.2138 μg/L (kg). This study highlights the need for a regulatory framework to mitigate the health risks associated with methylene blue in intelligent packaging systems and argues that regulatory thresholds should be set to ensure food safety and quality.

Modern Microbiological Methods to Detect Biofilm Formation in Orthopedy and Suggestions for Antibiotic Therapy, with Particular Emphasis on Prosthetic Joint Infection (PJI)

Biofilm formation is a serious problem that relatively often causes complications in orthopedic surgery. Biofilm-forming pathogens invade implanted foreign bodies and surrounding tissues. Such a condition, if not limited at the appropriate time, often requires reoperation. This can be partially prevented by selecting an appropriate prosthesis material that prevents the development of biofilm. There are many modern techniques available to detect the formed biofilm. By applying them we can identify and visualize biofilm-forming microorganisms. The most common etiological factors associated with biofilms in orthopedics are: Staphylococcus aureus, coagulase-negative Staphylococci (CoNS), and Enterococcus spp., whereas Gram-negative bacilli and Candida spp. also deserve attention. It seems crucial, for therapeutic success, to eradicate the microorganisms able to form biofilm after the implantation of endoprostheses. Planning the effective targeted antimicrobial treatment of postoperative infections requires accurate identification of the microorganism responsible for the complications of the procedure. The modern microbiological testing techniques described in this article show the diagnostic options that can be followed to enable the implementation of effective treatment.

Synthesis and characterization of a novel copper carboxylate complex and a copper complex-coated polyether sulfone membrane for efficient degradation of methylene blue dye under UV irradiation: the single crystal X-ray structure of the copper carboxylate complex

Synthesis of a novel binuclear Cu(II) carboxylate complex under ambient laboratory conditions is presented. The complex exhibits a paddle wheel structure in which the axial positions are occupied by two copper atoms instead of two water molecules. The synthesized complex was characterized by single-crystal X-ray crystallography, FT-IR, X-ray diffraction, and UV-visible spectroscopy techniques. The thermal stability of the metal complex was studied by the thermogravimetric analysis study. The synthesized metal complex was employed for the synthesis of metal complex-coated polyether sulfone (PES) membranes which were characterized before and after filtration using the FESEM technique. The photocatalytic efficiency of the metal complex was studied for the degradation of methylene blue dye under UV irradiation in the presence of H2O2 and was compared with the photodegradation efficiency of the metal complex-coated polyether sulfone (PES) membrane.

Scale-up single chamber of microbial fuel cell using agitator and sponge biocarriers

Despite the high efficiency of microbial fuel cells (MFCs), MFCs cannot be a suitable alternative for treatment plants because of insufficient power generation and tiny reactors. Additionally, the increased reactor size and MFC stack result in a reduction in production power and reverse voltage. In this study, a larger MFC with a volume of 1.5 L has been designed called LMFC. A conventional MFC, called SMFC, with a volume of 0.157 L, was constructed and compared with LMFC. Moreover, the designed LMFC can be integrated with other treatment systems and generate significant electricity. In order to evaluate MFC's ability to integrate with other treatment systems, the LMFC reactor was converted into MFC-MBBR by adding sponge biocarriers. A 9.5 percent increase in reactor volume resulted in a 60 percent increase in power density from 290 (SMFC) to 530 (LMFC). An agitator effect was also investigated for better mixing and circulating substrate, which positively affected the power density by about 18%. Compared with LMFCs, the reactor with biocarriers generated a 28% higher power density. The COD removal efficiency of SMFC, LMFC, and MFC-MBBR reactors after 24 h was 85, 66, and 83%, respectively. After 80 h of operation, the Coulombic efficiency of the SMFC, LMFC, and MFC-MBBR reactors was 20.9, 45.43, and 47.28%, respectively. The doubling of coulombic efficiency from SMFC to LMFC reactor shows the design's success. The reduction of COD removal efficiency in LMFC is the reason for integrating this reactor with other systems, which was compensated by adding biocarriers.

Mesoporous magnetic biochar derived from common reed (Phragmites australis) for rapid and efficient removal of methylene blue from aqueous media

A novel mesoporous magnetic biochar (MBC) was prepared, using a randomly growing plant, i.e., common reed, as an exporter of carbon, and applied for removal of methylene blue (MB) from aqueous solutions. The prepared sorbent was characterized by nitrogen adsorption/desorption isotherm, saturation magnetization, pH of point of zero charges (pHPZC), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). The obtained MBC has a specific surface area of 94.2 m2 g-1 and a pore radius of 4.1 nm, a pore volume of 0.252 cm3 g-1, a saturation magnetization of 0.786 emu g-1, and a pHPZC of 6.2. Batch adsorption experiments were used to study the impact of the physicochemical factors involved in the adsorption process. The findings revealed that MB removal by MBC was achieved optimally at pH 8.0, sorbent dosage of 1.0 g L-1, and contact time of 30 min. At these conditions, the maximum adsorption was 353.4 mg g-1. Furthermore, the adsorption isotherm indicated that the Langmuir pattern matched well with the experimental data, compared to the Freindlich model. The ∆G was - 6.7, - 7.1, and - 7.5 kJ mol-1, at 298, 308, and 318 K, respectively, indicating a spontaneous process. The values of ∆H and ∆S were 5.71 kJ mol-1 and 41.6 J mol-1 K-1, respectively, suggesting endothermic and the interaction between MB and MBC is van der Waals type. The absorbent was regenerated and reused for four cycles after elution with 0.1 mol L-1 of HCl. This study concluded that the magnetic biochar generated from common reed has tremendous promise in the practical use of removing MB from wastewater.

Facile synthesis of double-cross-linked alginate-based hydrogel: Characterization and use in a context of circular economy for cationic dye removal

Hydrogels based on natural polysaccharides have received special attention in the last decade due to their interesting features, such as availability, biocompatibility, biodegradability and safety. Such characteristics may make them sustainable and eco-friendly materials for water and wastewater treatment, meeting the concept of circular economy. In this study, a novel double-cross-linked alginate-based hydrogel has been successfully synthesized using epichlorhydrin and sodium trimetaphosphate (STMP) as cross-linker agents and then used for the removal of methylene blue (MB) dye under different operating conditions. The obtained hydrogel was deeply characterized by using various analytical techniques, namely Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. Experimental results showed that the synthesized double cross-linked hydrogel with relatively high STMP concentration (0.26 M) has promising structural and textural properties. This material exhibited excellent removal ability towards MB with a maximum adsorption capacity of about 992 mg/g for an initial pH of 10. The kinetic and isotherm modeling study revealed that the pseudo-second-order and Freundlich models fitted well the measured adsorption experimental data. The MB adsorption process onto the synthesized hydrogel is exothermic, feasible and spontaneous. It mainly includes electrostatic interaction and hydrogen bonds. These findings suggest that double-cross-linked alginate-based hydrogel can be considered as an attractive and potential adsorbent for an effective cationic dye removal from aqueous environments. The use of such a green adsorbent for the treatment of organic-pollutants-rich industrial wastewaters promotes sustainability and circular economy concepts.

Recent advances of piezo-catalysis and photocatalysis for efficient environmental remediation

The efficient degradation of organic pollutants in diverse environmental matrices can be achieved through the synergistic application of piezo-catalysis and photocatalysis. The focus of this study is on understanding the fundamental principles and mechanisms that govern the collaborative action of piezoelectric and photocatalytic materials. Piezoelectric nanomaterials, under mechanical stress, generate piezo-potential, which, when coupled with photocatalysts, enhances the generation and separation of charge carriers. The resulting cascade of redox reactions promotes the degradation of a wide spectrum of organic pollutants. The comprehensive investigation involves a variety of experimental techniques, including advanced spectroscopy and microscopy, to elucidate the intricate interplay between mechanical and photoinduced processes. The influence of key parameters, such as material composition, morphology, and external stimuli on the catalytic performance, is systematically explored. This study contributes to the increasing knowledge of environmental remediation and lays the foundation for the development of advanced technologies using piezo and photocatalysis for sustainable pollutant removal.

Novel granular bentonite-carbon sorbents: textural characterization, adsorption-desorption isotherm, kinetics, and cost estimation

This research focuses on the synthesis of novel low-cost granular sorbents based on bentonite clay of the Navbahor deposit, dust fraction of Angren brown coal, and agricultural wastes such as straw and sawdust to meet the internal needs of the Republic of Uzbekistan. The impact of the initial mixture ingredients on the structural and textural properties of bentonite-coal sorbents (BCSs) has been studied using X-ray diffraction, Raman spectroscopy, Fourier-transform infrared spectroscopy, optical microscopy, and nitrogen adsorption-desorption analysis. For determining the sorption capacity of BCSs, a standard model substance methylene blue (MB), was applied. It was revealed that the maximum adsorption amount of MB was 5.3 mg∙g-1 during 2 h of contact. Prolonging the contact time to 24 h allowed for more extensive diffusion of dye molecules into the sorbent's pores, increasing the adsorption capacity to 13 mg∙g-1. It was demonstrated that BCSs could be regenerated by strong oxidizing agents such as sulfuric acid and hydrogen peroxide, with sulfuric acid proving more effective. Regeneration fully restores sorption properties, particularly at low dye concentrations (up to 0.2 mg∙ml-1). Despite slight reductions in adsorption capacity over multiple regeneration cycles, the sorbents maintain their structural integrity and durability. It is shown that compared to imported expensive activated carbon, the gross profitability of the in-house production of such granular BCSs within the territory of Uzbekistan increases from 48 to 78%, while the net income increases almost three times.

Photocatalytic activity of ZnO doped Nano hydroxyapatite/GO derived from waste oyster shells for removal of Methylene blue

Hydroxyapatite (HAp) stands as an inorganic compound, recognized as a non-toxic, bioactive ceramic, and its composition closely resembles that of bone material. In this study, nHAp was prepared from waste oyster shells, which are biowaste rich in calcium carbonate. nHAp with its unique catalytic property can be used as an adsorbent in various fields, including wastewater treatment. nHAp with an exceptional surface adsorbent with excellent chemical stability, enabling its catalytic function. Nano hydroxyapatite doped with Zinc oxide (ZnO) by wet chemical precipitation and made into a composite with Graphene oxide (GO) by modified hummers method followed by grinding, which was taken as 9:1 ratio (nHAp/ZnO and GO) of weight, enhances its tensile and mechanical strength. The energy band gap of nHAp photocatalyst was evaluated as 3.39 eV and that of the in nHAp/ZnO/GO photocatalyst was narrowed to 1.77 eV. The ternary nanocomposites are very efficient in generating the photogenerated electrons and holes, thereby improving the degradation potential of dye effluents to by-products such as CO2 and H2O. The nanocomposites photocatalyst were characterized by FTIR, XRD, SEM, TEM, EDS, XPS, DRS, and BET techniques. The UV-visible study shows the complete dye degradation efficiency of the prepared nanocomposites photocatalyst. In this study, the prepared nanocomposites nHAp/ZnO/GO have studied their efficiency for the removal of MB dye in a batch process by varying the dosage from 0.1 to 0.5 g, and the effects of dosage variations, pH, kinetic, scavenger study were evaluated at a time interval of 30 min. The removal of dye was found to be 99% at 150 min of 0.3 g dosage and pH = 12 is most favorable as it reached the same percentage at 90 min. The as-prepared nanocomposite nHAp/ZnO/GO fits the kinetic rate constant equation and shows a pseudo-first-order reaction model. This study indicates the suitability for dye removal due to the synergistic effect and electrostatic interaction of the synthesized ternary nanocomposite, which shows the potential, socially active, low-cost-effective, eco-friendly, and safe for photocatalytic degradation of MB from wastewater.

Detection of water pollutants using super-hydrophobic porous silicon-based SERS substrates

Super hydrophobic porous silicon surface is prepared using a wet chemical synthesis route. Scanning electron microscopic investigation confirms a correlation between pore size and reaction time. SERS substrates are prepared by silver nanoparticle deposition on porous silicon surface. They exhibit excellent characteristics in terms of sensitivity, reproducibility, stability, and uniformity. They could detect rhodamine 6G in femtomolar range with SERS enhancement factor of ~ 6.1 × 1012, which is best ever reported for these substrates. Molecule-specific sensing of water pollutants such as methylene blue, glyphosate, and chlorpyrifos, is demonstrated for concentrations well below their permissible limits along with excellent enhancement factors. Porous silicon substrate functionalized with Ag nanoparticles demonstrates to be a promising candidate for low-cost, long-life, reliable sensors for environmental conservation applications.

Green route to fabrication of Semal-ZnO nanoparticles for efficient solar-driven catalysis of noxious dyes in diverse aquatic environments

This work successfully demonstrates a sustainable and environmentally friendly approach for synthesizing Semal-ZnO nanoparticles (NPs) using the aqueous leaf extract of Bombax ceiba L. These NPs exhibit an absorption peak at approximately 390 nm in the UV-visible spectrum and an energy gap (Eg) of 3.11 eV. Detailed analyses of the morphology and particle size using various spectroscopic and microscopic techniques, XRD, FE-SEM with EDS, and HR-TEM reveal crystallographic peaks attributable to the hexagonal phase, with an average crystal size of 17 nm. The Semal-ZnO NPs also exhibit a notable photocatalytic efficiency for degrading methylene blue (MB) and methyl orange (MO) under sunlight in different water samples collected from diverse natural sources, indicating that they are promising photocatalysts for environmental remediation. The photocatalytic efficiency of the biofabricated Semal-ZnO NPs is impressive, exhibiting a photodegradation rate of up to 99% for MB and 79% for MO in different water samples under exposure to sunlight. The novel phytofabricated Semal-ZnO NPs are thus a beacon of hope for the environment, with their desirable photocatalytic efficiency, pseudo-first-order kinetics, and ability to break down noxious dye pollutants in various aquatic environments.

Green synthesis of yeast cell wall-derived carbon quantum dots with multiple biological activities

Hypothesis

Yeast cell walls are a sustainable biomass source containing carbon and other elements like phosphorus. Converting cell walls into valuable nanomaterials like carbon quantum dots (CQDs) is of interest.

Experiments

Cell walls from Saccharomyces cerevisiae were hydrothermally treated in 0.5 M H2SO4 to produce CQDs. Multiple analytical techniques were utilized to confirm phosphorus-doping (P-CQDs), characterize the fluorescence properties, determine quantum yield, and evaluate the sensing, antimicrobial, photocatalytic, and antioxidant capacities.

Findings

A successful synthesis of P-CQDs was achieved with strong blue fluorescence under UV excitation, 19 % quantum yield, and excellent stability. The P-CQDs showed sensitive fluorescence quenching in response to ferric ions with a 201 nM detection limit. Antibacterial effects against Escherichia coli and Staphylococcus aureus were demonstrated. P-CQDs also exhibited dye degradation under sunlight and antioxidant activity. So, the prepared P-CQDs displayed promising multifunctional capabilities for metal ion detection, disinfection, and environmental remediation. Further research is required to fully realize and implement the multifunctional potential of P-CQDs in real-world applications.

Copper-Based Two-Dimensional Metal-Organic Frameworks for Fenton-like Photocatalytic Degradation of Methylene Blue under UV and Sunlight Irradiation

To efficiently degrade organic pollutants, photocatalysts must be effective under both ultraviolet (UV) radiation and sunlight. We synthesized a series of new metal-organic frameworks by using mild hydrothermal conditions. These frameworks incorporate three distinct bipyridyl ligands: pyrazine (pyr), 4,4'-bipyridine (bpy), and 1,2-bis(4-pyridyl)ethane (bpe). The resulting compounds are denoted as [Cu(pyz)(H2O)2MF6], [Cu(bpy)2(H2O)2]·MF6, and [Cu(bpe)2(H2O)2]·MF6·H2O [M = Zr (1, 3, and 5) and Hf (2, 4, and 6)]. All six compounds exhibited a two-dimensional crystal structure comprising infinitely nonintersecting linear chains. Compound 3 achieved 100% degradation of methylene blue (MB) after 8 min under UV irradiation and 100 min under natural sunlight in the presence of H2O2 as the electron acceptor. For compound 5, 100% MB degradation was achieved after 120 min under sunlight and 10 min under UV light. Moreover, reactive radical tests revealed that the dominant species involved in photocatalytic degradation are hydroxyl (•OH), superoxide radicals (•O2-), and photogenerated holes (h+). The photodegradation process followed pseudo-first-order kinetics, with photodegradation rate constants of 0.362 min-1 (0.039 min-1) for 3 and 0.316 min-1 (0.033 min-1) for 5 under UV (sunlight) irradiation. The developed photocatalysts with excellent activity and good recyclability are promising green catalysts for degrading organic pollutants during environmental decontamination.

Reverse Osmosis with Intermediate Chemical Demineralization: Scale Inhibitor Selection, Degradation, and Seeded Precipitation

Two-stage reverse osmosis (RO) processes with intermediate concentrate demineralization (ICD) provide an efficient strategy to treat brines with high CaSO4 contents and reduce concentrate discharge. In this paper, an SRO concentrate is treated using ICD to remove CaSO4 and then mixed with a PRO concentrate for further desalination in SRO, thereby reducing the discharge of the concentrate. We investigate the selection and degradation of scale inhibitors, as well as seeded precipitation in the two-stage RO process with ICD, to achieve a high water recovery rate. A scale inhibitor is added to restrain CaSO4 crystallization on the membrane surface, and the optimized scale inhibitor, RO-400, is found to inhibit calcium sulfate scaling effectively across a wide range of the saturation index of gypsum (SIg) from 2.3 to 6. Under the optimized parameters of 40 W UV light and 70 mg/L H2O2, UV/H2O2 can degrade RO-400 completely in 15 min to destroy the scale inhibitor in the SRO concentrate. After scale inhibitor degradation, the SRO concentrate is desaturated by seeded precipitation, and the reaction degree of CaSO4 reaches 97.12%, leading to a concentrate with a low SIg (1.07) for cyclic desalination. Three UVD-GSP cycle tests show that the reused gypsum seeds can also ensure the effect of the CaSO4 precipitation process. This paper provides a combined UVD-GSP strategy in two-stage RO processes to improve the water recovery rate for CaSO4-contained concentrate.

Fe/Au galvanic nanocells to generate self-sustained Fenton reactions without additives at neutral pH

The generation of reactive oxygen species (ROS) via the Fenton reaction has received significant attention for widespread applications. This reaction can be triggered by zero-valent metal nanoparticles by converting externally added H2O2 into hydroxyl radicals (˙OH) in acidic media. To avoid the addition of external additives or energy supply, developing self-sustained catalytic systems enabling onsite production of H2O2 at a neutral pH is crucial. Here, we present novel galvanic nanocells (GNCs) based on metallic Fe/Au bilayers on arrays of nanoporous silica nanostructures for the generation of self-sustained Fenton reactions. These GNCs exploit the large electrochemical potential difference between the Fe and Au layers to enable direct H2O2 production and efficient release of Fe2+ in water at neutral pH, thereby triggering the Fenton reaction. Additionally, the GNCs promote Fe2+/Fe3+ circulation and minimize side reactions that passivate the iron surface to enhance their reactivity. The capability to directly trigger the Fenton reaction in water at pH 7 is demonstrated by the fast degradation and mineralization of organic pollutants, by using tiny amounts of catalyst. The self-generated H2O2 and its transformation into ˙OH in a neutral environment provide a promising route not only in environmental remediation but also to produce therapeutic ROS and address the limitations of Fenton catalytic nanostructures.

Enhanced Heterogeneous Fenton Degradation of Organic Dyes by Bimetallic Zirconia-Based Catalysts

The qualitative impact of pollutants on water quality is mainly related to their nature and their concentration, but in any case, they determine a strong impact on the involved ecosystems. In particular, refractory organic compounds represent a critical challenge, and several degradation processes have been studied and developed for their removal. Among them, heterogeneous Fenton treatment is a promising technology for wastewater and liquid waste remediation. Here, we have developed mono- and bimetallic formulations based on Co, Cu, Fe, and Mn, which were investigated for the degradation of three model organic dyes (methylene blue, rhodamine B, and malachite green). The treated samples were then analyzed by means of UV-vis spectrophotometry techniques. Bimetallic iron-based materials achieved almost complete degradation of all three model molecules in very short time. The Mn-Fe catalyst resulted in the best formulation with an almost complete degradation of methylene blue and malachite green at pH 5 in 5 min and of rhodamine B at pH 3 in 30 min. The results suggest that these formulations can be applied for the treatment of a broad range of liquid wastes comprising complex and variable organic pollutants. The investigated catalysts are extremely promising when compared to other systems reported in the literature.

Post-Irradiation Behavior of Colored PVA-Based Films Containing Ag Nanoparticles as Radiation Detectors/Exposure Indicators

Ionizing radiation covers a broad spectrum of applications. Since radioactive/radiation pollution is directly related to radiation risk, radiation levels should be strictly controlled. Different detection methods can be applied for radiation registration and monitoring. In this paper, radiation-induced variations in the optical properties of silver-enriched PVA-based hydrogel films with and without azo dye (Toluidine blue O, TBO, and Methyl red, MR) additives were investigated, and the feasibility of these free-standing films to serve as radiation detectors/exposure indicators was assessed. AgNO3 admixed with PVA gel was used as a source for the radiation-induced synthesis of silver nanoparticles (AgNPs) in irradiated gel films. Three types of sensors were prepared: silver-enriched PVA films containing a small amount of glycerol (AgPVAGly); silver-enriched PVA films with toluidine blue adducts (AgPVAGlyTBO); and silver-enriched PVA films with methyl red additives (AgPVAGlyMR). The selection of TBO and MR was based on their sensitivity to irradiation. The irradiation of the samples was performed in TrueBeam2.1 (VARIAN) using 6 MeV photons. Different doses up to 10 Gy were delivered to the films. The sensitivity of the films was assessed by analyzing the characteristic UV-Vis absorbance peaks on the same day as irradiation and 7, 30, 45, 90, and 180 days after irradiation. It was found that the addition of azo dyes led to an enhanced radiation sensitivity of the AgNPs containing films (0.6 Gy-1 for AgPVAGlyTBO and 0.4 Gy-1 for AgPVAGlyMR) irradiated with <2 Gy doses, indicating their applicability as low-dose exposure indicators. The irradiated films were less sensitive to higher doses. Almost no dose fading was detected between the 7th and 45th day after irradiation. Based on the obtained results, competing AgNP formation and color-bleaching effects in the AgPVAGly films with dye additives are discussed.

Upcycling of sugar refining mud solid waste as a novel adsorbent for removing methylene blue and Congo red from wastewater

The feasibility of utilizing the mud solid waste (MSW) produced during the carbonation process of sugar refining as a cost-effective and environmentally friendly alternative for the water removal of methylene blue (MB) and Congo red (CR), being highly utilized organic dyes representing cationic and anionic species, respectively is presented. Prior to its use, the MSW was dried at 110 °C for 24 h and sieved through a 100-mesh screen. The chief constituent of the MSW utilized was CaCO3, with a point of zero charge (PZC) found at pH 8.4 and 7.96 m2 g-1 total surface area. XRD and FTIR data indicate the presence of interactions between the dyes and the MSW surface, indicating effective adsorption. Different variables, such as initial dye concentration, MSW weight, solution pH, contact time, and temperature, were all examined to determine the optimal dye removal conditions. A central composite design (CCD) approach based on response surface methodology (RSM) modeling was utilized to identify statistically significant parameters for MB and CR adsorption capacities onto the MSW adsorbent. The removal equilibrium was typically reached in 120 minutes, with the greatest removal efficiency of CR taking place at pH 2 and 328 K, while the highest MB removal efficiency was obtained at pH 12 and 296 K. Kinetic studies suggest the adsorption of both dyes on the MSW follow pseudo-second-order rates, as evident through the high correlations obtained. Linearized and non-linearized Langmuir models showed strong correlations indicating maximum adsorption capacities of 86.6 and 72.3 mg g-1 for MB and CR, respectively. High regeneration and reusability potential of the MSW was demonstrated especially for the adsorption of CR, where the removal efficiency was nearly constant throughout five adsorption cycles, ranging from 93 to 91%, while the reduction in the removal for MB was much more significantly impacted, diminishing from 95 to 79% after the five cycles.

Lignin nanoparticles as a highly efficient adsorbent for the removal of methylene blue from aqueous media

This work demonstrated enhanced adsorption capabilities of lignin nanoparticles (LNPs) synthesized via a straightforward hydrotropic method compared to pristine lignin (PL) powder for removing methylene blue dye from aqueous solutions. Kraft lignin was used as a precursor and p-toluenesulfonic acid as the hydrotrope to produce spherical LNPs with ~ 200 nm diameter. Extensive characterization by SEM, AFM, DLS, zeta potential, and BET verified successful fabrication of microporous LNPs with fourfold higher specific surface area (14.9 m2/g) compared to PL (3.4 m2/g). Significantly reduced particle agglomeration and rearranged surface chemistry (zeta potential of -13.3 mV) arising from the self-assembly of lignin fractions under hydrotropic conditions enabled the application of LNPs and superior adsorbents compared to PL. Batch adsorption experiments exhibited up to 14 times higher methylene blue removal capacity, from 20.74 for PL to 127.91 mg/g for LNPs, and ultrafast equilibrium uptake within 3 min for LNPs compared to 10 min for PL. Kinetic modeling based on pseudo-first-order and pseudo-second-order equations revealed chemisorption as the predominant mechanism, with a rate constant of 0.032825 g/mg·h for LNPs-over an order of magnitude higher than PL (0.07125 g/mg·h). Isotherm modeling indicated Langmuir monolayer adsorption behavior on relatively uniform lignin surface functional groups. The substantially augmented adsorption performance of LNPs arose from the increased surface area and abundance of surface functional groups, providing greater accessibility of chemically active binding sites for rapid dye uptake. Overall, this work demonstrates that tailoring lignin nanoparticle structure and surface chemistry via scalable hydrotropic synthesis is a simple and sustainable approach for producing highly efficient lignin-based nano-adsorbents for organic dye removal from industrial wastewater.

Efficient dye adsorption of mesoporous activated carbon from bamboo parenchyma cells by phosphoric acid activation

In order to solve the environmental damage caused by the discharge of dyes as industrial wastewater, the development of efficient and sustainable adsorbents is the key, while most of the previous studies on bamboo parenchyma cells have focused on their microstructural, functional and mechanical properties, and few of the properties in adsorption have been investigated. To evaluate the role of the unique microstructure of bamboo parenchyma cells on adsorption after carbonization and activation, PC-based activated carbon (PPAC) was fabricated by the phosphoric acid activation method and tested for adsorption using methylene blue (MB). The effect of mesoporous structure on MB adsorption was investigated in detail using PPAC-30C impregnated with phosphoric acid at a concentration of 30%. The results showed that the adsorption performance was influenced by single-factor experiments (e.g., pH, activated carbon dosing). The adsorption isotherms and kinetics could conform to the Langmuir model (R2 = 0.983-0.994) and pseudo-second-order kinetic model (R2 = 0.822-0.991) respectively, and the maximum MB adsorption capacity of adsorbent was 576 mg g-1. The adsorption mechanism of MB on PPAC-30C includes physical adsorption, electrostatic attraction, hydrogen bonding, and the π-π conjugation effect, which was dominated by physical adsorption. The results of this study show that PPAC has good application prospects for cationic dye removal.

Novel ultrasonic technology for advanced oxidation processes of water treatment

Textile wastewater accounts for a significant proportion of industrial wastewater worldwide. In particular, dye wastewater accounts for a large proportion and consists of non-degradable dyes, which are substances resistant to biodegradation. Methylene blue is a representative example of such non-degradable dyes. It is not biologically degraded and exhibits toxicity. Various methods for their decomposition are currently being studied. Advanced oxidation processes (AOPs), which generate highly reactive hydroxyl radicals that oxidize and degrade pollutants, have been actively studied. Particularly, the photocatalytic degradation method using TiO2 nanoparticles is one of the most actively studied fields; however, there are still concerns regarding the toxicity of nanoparticles. Research is currently being conducted on AOPs using the cavitation phenomenon of ultrasonic waves. However, achieving high efficiency using existing ultrasonic equipment is difficult. Therefore, in this study, we evaluated a new water treatment technology through AOPs using a focused ultrasonic system with a cylindrical piezoelectric ceramic structure. After determining the optimal conditions for degradation, the degradation process was evaluated as a useful tool for mitigating the toxicity of methylene blue. We found that, under the optimal conditions of 100 W intensity at a frequency of 400 kHz, this system is a helpful instrument for degradation and a new water treatment technology suitable for removing ecotoxicity and genotoxicity.

Optical and UV Shielding Properties of Inorganic Nanoparticles Embedded in Polymethyl Methacrylate Nanocomposite Freestanding Films

Polymethyl methacrylate (PMMA) is an interesting polymer employed in various applications due to its outstanding properties. However, its electrical and mechanical properties can be further improved by incorporating nanoparticles, and in particular, PMMA nanocomposite with nanoparticles provides various multifunctional properties. This work reports PMMA nanocomposite preparation and structural and optical characterizations incorporating carbon nanotubes (CNTs), TiO2 nanoparticles, and carbon quantum dots (CQDs). CNT/PMMA, TiO2/PMMA, and CQD/PMMA nanocomposite freestanding films were prepared using a simple solution method. Various properties of the prepared composite films were analyzed using scanning electron microscopy, X-ray diffraction, photoluminescence, Fourier transform infrared, and UV-Vis and Raman spectroscopy. Optical parameters and photocatalytic dye degradation for the films are reported, focusing on the properties of the materials. The CNT/PMMA, TiO2/PMMA, and CQD/PMMA films achieved, respectively, good electrical conductivity, photodegradation, and fluorescence compared with other composite films.

3D-printed stereolithographic fluidic devices for automatic nonsupported microelectromembrane extraction and clean-up of wastewater samples

BACKGROUND

There is a quest of novel functional and reliable platforms for enhancing the efficiency of microextraction approaches in troublesome matrices, such as industrial wastewaters. 3D printing has been proven superb in the analytical field to act as the springboard of microscale extraction approaches.

RESULTS

In this work, low-force stereolithography (SL) was exploited for 3D printing and prototyping bespoke fluidic devices for accommodating nonsupported microelectromembrane extraction (μEME). The analytical performance of 3D-printed μEME devices with distinct cross-sections, including square, circle, and obround, and various channel dimensions was explored against that of commonly used circular polytetrafluoroethylene (PTFE) tubing in flow injection systems. A computer-controlled millifluidic system was harnessed for the (i) automatic liquid-handling of minute volumes of donor, acceptor, and organic phases at the low μL level that spanned from 3 to 44 μL in this work, (ii) formation of three-phase μEME, (iii) in-line extraction, (iv) flow-through optical detection of the acceptor phase, and (v) solvent removal and regeneration of the μEME device and fluidic lines. Using methylene blue (MB) as a model analyte, experimental results evinced that the 3D-printed channels with an obround cross-section (2.5 mm × 2.5 mm) were the most efficient in terms of absolute extraction recovery (59%), as compared to PTFE tubing of 2.5 mm inner diameter (27%). This is attributed to the distinctive convex interface of the organic phase (1-octanol), with a more pronounced laminar pattern, in 3D-printed SL methacrylate-based fluidic channels against that of PTFE tubing on account of the enhanced 1-octanol wettability and lower contact angles for the 3D-printed devices. The devices with obround channels were leveraged for the automatic μEME and in-line clean-up of MB in high matrix textile dyeing wastewater samples with relative recoveries ≥81%, RSD% ≤ 17.1% and LOD of 1.3 mg L-1. The 3D-printed nonsupported μEME device was proven superb for the analysis of wastewater samples with an elevated ionic strength (0.7 mol L-1 NaCl, 5000 mg L-1 Na2CO3, and 0.013 mol L-1 NaOH) with recorded electric currents below 12 μA.

NOVELTY

The coupling of 3D printing with nonsupported μEME in automatic flow-based systems is herein proposed for the first time and demonstrated for the clean-up of troublesome samples, such as wastewaters.

Sn(IV)porphyrin-Incorporated TiO2 Nanotubes for Visible Light-Active Photocatalysis

In this study, two distinct photocatalysts, namely tin(IV)porphyrin-sensitized titanium dioxide nanotubes (SnP-TNTs) and titanium dioxide nanofibers (TNFs), were synthesized and characterized using various spectroscopic techniques. SnP-TNTs were formed through the hydrothermal reaction of NaOH with TiO2 (P-25) nanospheres in the presence of Sn(IV)porphyrin (SnP), resulting in a transformation into Sn(IV)porphyrin-imbedded nanotubes. In contrast, under similar reaction conditions but in the absence of SnP, TiO2 (P-25) nanospheres evolved into nanofibers (TNFs). Comparative analysis revealed that SnP-TNTs exhibited a remarkable enhancement in the visible light photodegradation of model pollutants compared to SnP, TiO2 (P-25), or TNFs. The superior photodegradation activity of SnP-TNTs was primarily attributed to synergistic effects between TiO2 (P-25) and SnP, leading to altered conformational frameworks, increased surface area, enhanced thermo-chemical stability, unique morphology, and outstanding visible light photodegradation of cationic methylene blue dye (MB dye). With a rapid removal rate of 95% within 100 min (rate constant = 0.0277 min-1), SnP-TNTs demonstrated excellent dye degradation capacity, high reusability, and low catalyst loading, positioning them as more efficient than conventional catalysts. This report introduces a novel direction for porphyrin-incorporated catalytic systems, holding significance for future applications in environmental remediation.

Cellulose acetate nanofiber modified with polydopamine polymerized MOFs for efficient removal of noxious organic dyes

The need to effectively remove toxic organic dyes from aquatic systems has become an increasingly critical issue in the recent years. In pursuit of this objective, polydopamine (PDA)-binary ZIF-8/UiO-66 (MOFs) was synthesized and incorporated into cellulose acetate (CA), producing ZIF-8/UiO-66/PDA@CA composite nanofibers under meticulously optimized conditions. The potential of fabricated nanofibers to remove cationic methylene blue (MB) dye was investigated. Various analysis tools including FTIR, XRD, SEM, zeta potential, BET, tensile strength testing, and XPS were employed. Results revealed a substantial leap in tensile strength, with ZIF-8/UiO-66/PDA@CA registering an impressive 2.8 MPa, as a marked improvement over the neat CA nanofibers (1.1 MPa). ZIF-8/UiO-66/PDA@CA nanofibers exhibit an outstanding adsorption capacity of 82 mg/g, notably outperforming the 22.4 mg/g capacity of neat CA nanofibers. In binary dye systems, these nanofibers exhibit a striking maximum adsorption capacity of 108 mg/g, establishing their eminence in addressing the complexities of wastewater treatment. Furthermore, the adsorption data fitted to the Langmuir isotherm, and the pseudo-second-order kinetic model. The fabricated nanofiber demonstrates good reproducibility and durability, consistently upholding its performance over five cycles. This suite of remarkable attributes collectively underscores its potential as a robust, durable, and highly promising solution for the effective and efficient removal of pernicious MB dye, in the context of both water quality improvement and environmental preservation.

Comparative study of synthesis methods and pH-dependent adsorption of methylene blue dye on UiO-66 and NH2-UiO-66

Metal-organic frameworks (MOFs) are highly promising adsorbents with notable properties such as elevated adsorption capacities and versatile surface design capabilities. This study introduces two distinct synthesis methods, one lasting 1 h and the other 24 h, for UiO-66 and NH2-UiO-66. While both methods yield structures with comparable crystallinity and morphology, the adsorption performance of the cationic methylene blue dye varies at different pH levels. Despite the 24 h synthesis time being optimal for maximum adsorption in both MOFs, the relative difference in NH2-UiO-66 adsorption percentage at different times suggests reduced dependency on synthesis time for this property. Notably, NH2-UiO-66 exhibits consistent and effective performance across three pH levels, warranting further investigation into its adsorption kinetics and isotherm. The achievement of high adsorption efficiency coupled with a significantly reduced synthesis time underscores the importance of developing simplified synthetic methods, essential for enhancing the practical applicability of MOFs in diverse applications.

Green Organo-Photooxidative Method for the Degradation of Methylene Blue Dye

This study used an organophoto-oxidative material to degrade the toxic azo dye, methylene blue (MB), due to its hazardous effects on aquatic life and humans. MB is traditionally degraded using metal-based catalysts, resulting in high costs. Several organic acids were screened for organo-photooxidative applications against various azo dyes, and ascorbic acid (AA), also known as vitamin C, was found to be best for degradation due to its high photooxidative activity. It is an eco-friendly, edible, and efficient photooxidative material. A photocatalytic box has been developed for the study of organo-photooxidative activity. It was found that when AA was added, degradation efficiency increased from 42 to 95% within 240 min. Different characterization techniques, such as HPLC and GC-MS, were used after degradation for the structural elucidation of degraded products. DFT study was done for the investigation of the mechanistic study behind the degradation process. A statistical tool, RSM, was used for the optimization of parameters (concentration of dye, catalyst, and time). This study develops sustainable and effective solutions for wastewater treatment.

Fabrication of Mechanically Alloyed Super Duplex Stainless Steel Powder-Modified Carbon Paste Electrode for the Determination of Methylene Blue by the Cyclic Voltammetry Technique

Alloys with an equal balance of ferrite and austenite provide super duplex stainless steel (DSS) with enhanced strength and corrosion resistance. This study utilized mechanical alloying to produce nanostructured super duplex stainless steel powders for the identification of methylene blue dye in wastewater. High-energy particle grinding was employed to create the SAF-2507 DSS powders. To electrochemically oxidize methylene blue dye in wastewater, a modified carbon paste electrode (DSS-MCPE) was developed. Methylene blue, a water-soluble cationic colorant extensively used in the paper, pulp, and textile industries, poses a threat to human health and water supplies when improperly disposed of. DSS-MCPE demonstrated a significant current response, indicating its capability to detect methylene blue dye in a pH range of 6-8. The experiment revealed that 2 mg of DSS-MCPE produced a maximum current response of 72.22 μA, facilitating the effective electrooxidation of methylene blue dye in wastewater. Furthermore, the investigation demonstrated that the active surface area of the 2 mg of DSS-MCPE (0.478 cm2) was greater than that of the bare carbon paste electrode (BCPE) (0.054 cm2). The increased active surface area was correlated with an enhanced current response. The strong interaction between methylene blue molecules at the interface of the produced 2 mg of DSS-MCPE contributed to the observed increase in anodic current across methylene blue concentrations ranging from 0.1 to 0.6 mM.

Structural Control Enables Catalytic and Electrocatalytic Activity of Porous Tetrametallic Nanorods

Integrating more than one type of metal into a nanoparticle that has a well-defined morphology and composition expands the functionalities of nanocatalysts. For a metal core/porous multimetallic shell nanoparticle, the availability of catalytically active surface sites and molecular mass transport can be enhanced, and the multielemental synergy can facilitate intraparticle charge transport. In this work, a reliable and robust synthesis of such a functional tetrametallic nanoparticle type is presented, where a micro- and mesoporous PdPtIr shell is grown on Au nanorods. The effect of critical synthesis parameters, namely temperature and the addition of HCl are investigated on the hydrodynamic size of the micellar pore template as well as on the stability of the metal chloride complexes and various elemental analysis techniques prove composition of the porous multimetallic shell. Due to the synergistic properties, the tetrametallic nanorods possess extensive negative surface charge making them a promising catalyst in reduction reactions. Dye degradation as well as the conversion of p-nitrophenol to p-aminophenol is catalyzed by the supportless nanorods without light illumination. By depositing the particles onto conductive substrates, the nanostructured electrodes show promising electrocatalytic activity in ethanol oxidation reaction. The nanocatalyst presents excellent morphological stability during all the catalytic test reactions.

Defect-mediated time-efficient photocatalytic degradation of methylene blue and ciprofloxacin using tungsten-incorporated ternary perovskite BaSnO3 nanoparticles

Photocatalytic water purification has been extensively explored for its economic, eco-friendly, and sustainable aspects. In this study, tungsten (W) incorporated BaSn1-xWxO3 (x = 0 to 0.05) nanoparticles synthesized by facile hydrogen peroxide precipitation route has been demonstrated for photocatalytic degradation of methylene blue (MB) dye and ciprofloxacin (CIP) antibiotic. The structural analysis indicates the presence of hybrid composite-like nanostructures with reduced crystallinity. Optical studies reveal blueshift in bandgap and decrease in oxygen vacancy defects upon W-incorporation. Pure BaSnO3 shows overall enhanced photocatalytic activity towards MB (90.22%) and CIP (78.12%) after 240 min of white LED light and sunlight irradiation respectively. The 2 % W-incorporated BaSnO3 shows superior photocatalytic degradation of MB (26.89%) and CIP (45.14%) within first 30 min of irradiation confirming the presence of W to be beneficial in the process. The free radical study revealed the dominant role of reactive hole (h+) and oxygen radical (O2•-) species during photodegradation and their intermediates are investigated to elucidate the degradation mechanism of MB within 30 min of irradiation. This study is promising towards developing defect mediated and time-efficient photocatalysts for environmental remediation.

A two-in-one thiosemicarbazide and whole pine needle-based adsorbent for rapid and efficient adsorption of methylene blue dye and mercuric ions

Herein, we report the synthesis of an oxidized pine needle-thiosemicarbazone Schiff base (OPN-TSC) from whole pine needles (WPN) as a dual-purpose adsorbent to remove a cationic dye, methylene blue (MB), and Hg2+ ions in separate processes. The adsorbent was synthesized by periodate oxidation of WPN followed by a reaction with thiosemicarbazide. The syntheses of OPN and OPN-TSC were confirmed by FTIR, XRD, FESEM, EDS, BET, and surface charge analysis. The emergence of new peaks at 1729 cm-1 (-CHO stretching) and 1639 cm-1 (-COO- stretching) in the FTIR spectrum of OPN confirmed the oxidation of WPN to OPN. FTIR spectrum of OPN-TSC has a peak at 1604 cm-1 (C = N stretching), confirming the functionalization of OPN to OPN-TSC. XRD studies revealed an increase in the crystallinity of OPN and a decrease in the crystallinity of OPN-TSC because of the attachment of thiosemicarbazide to OPN. The values of %removal for MB and Hg2+ ions by OPN-TSC were found to be 87.36% and 98.2% with maximum adsorption capacity of 279.3 mg/g and 196 mg/g for MB and Hg2+ ions, respectively. The adsorption of MB followed pseudo-second-order kinetics with correlation coefficient (R2 of 0.99383) and Freundlich isotherm (R2 = 0.97239), whereas Hg2+ ion removal demonstrated the Elovich (R2 = 0.97076) and Langmuir isotherm (R2 = 0.95110). OPN-TSC is regenerable with significant recyclability up to 10 cycles for both the adsorbates. The studies established OPN-TSC as a low-cost, sustainable, biodegradable, environmentally benign, and promising adsorbent for the removal of hazardous cationic dyes and toxic metal ions from wastewater and industrial effluents, especially the textile effluents.

Selective adsorption of single and binary dyestuffs by citrus peel: Characterization, and adsorption performance

The powdered citrus peel, which has been replaced with sodium hydroxide, was used in this study to test how well methylene blue and reactive black 5 dyestuff absorbed one or both. To find out about the texture and surface chemistry of modified citrus peel, Fourier transform infrared spectroscopy and scanning electron microscope analyses were carried out. Fourier transform infrared spectroscopy data revealed the presence of amphoteric radicals on the modified citrus peel surface, indicating the effective adsorption of methylene blue and reactive black 5. Many parameters affecting the batch adsorption process, such as modified citrus peel dose (0.1-0.5 g), pH (2-10), time (20-80 min), stirring speed (60-180 rpm), and temperature (20-45 °C), were studied. It is seen that the physical effect is at the forefront, homogeneous monolayer adsorption occurs, and the process fits the Langmuir and pseudo first order models for dyestuffs. Thermodynamic modeling showed that the adsorption of methylene blue and reactive black 5 was spontaneous and endothermic. At pH 2, an adsorption capacity of 0.67 mg/g and a removal efficiency of 66.86% were achieved for reactive black 5. For methylene blue at pH 6, the adsorption capacity was 4.34 mg/g, and the decolorization rate was 87%. The decreases in the removal rates of dyestuffs in the binary system indicate that they are affected by their simultaneous presence in the solution. The results proved that modified citrus peel can be useful for dyestuff removal in single or binary systems, although the removal capacity of modified citrus peel is highly dependent on methylene blue and reactive black 5.

Potential of biosynthesized titanium dioxide nanoparticles towards wastewater treatment and antimicrobial activity

This study reports a green, sustainable, reliable, and cost-effective method for the biosynthesis of titanium dioxide nanoparticles (TiO2NPs) using the leaf and stem extracts of Carissa opaca. The newly synthesized biogenic TiO2NPs were confirmed and characterized using various analytical techniques, such as Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), zeta potential, X-ray diffraction (XRD), inductively coupled plasma analysis (ICP), and scanning electron microscopy (SEM). Both the electron microscopy, i.e., SEM and HRTEM confirmed the spherical/hexagonal crystalline structure of TiO2NPs with an average particle size range from 72.8 to 84.11 nm. These nanoparticles (NPs) exhibited aggregation and possessed a diverse array of functional groups on their surface. Biosynthesized TiO2NPs showed excellent photocatalytic activity against methylene blue (MB) with decolorizing efficiency of 87.8% and 91.95%, whereas in case of methyl violet (MV), the decolorizing efficiency of 82.1% and 71.9% was observed with nanoparticles synthesized using leaf and stem extract, respectively. The newly synthesized NPs have also shown good antibacterial potential against Klebsiella pneumoniae and Staphylococcus aureus. This new biomimetic approach offers an economical and environmentally benign alternative for the removal of hazardous dyes and may find a place for antimicrobial applications.

Sol-Gel TiO2 Thin Film on Au Nanoparticles for Heterogeneous Plasmonic Photocatalysis

A new, simple method for preparing substrates for photocatalytic applications under visible light is presented. It is based on the preparation of a dense array of gold nanoparticles (AuNPs) by thermal dewetting of a thin gold film followed by spin-coating of a thin TiO2 film prepared by sol-gel chemistry. The photocatalytic properties of these nanocomposite films are studied by surface-enhanced Raman spectroscopy (SERS) following the N-demethylation reaction of methylene blue as a model reaction. This approach shows that the semiconducting layer on the AuNPs can significantly increase the efficiency of the photoinduced reaction. The SERS study also illustrates the influence of parameters such as TiO2 thickness and position (on or under the AuNPs). Ultimately, this study emphasizes that the primary mechanism behind the N-demethylation reaction is both the increase in extinction and the improved electron transfer facilitated by the semiconducting layer. On the other hand, exclusive reliance on photothermal effects is ruled out.

Novel soy protein isolate/sodium alginate-based functional aerogel for efficient uptake of organic dye from effluents

In response to the increasing global concern regarding water pollution, there is a growing demand for the development of novel adsorbents capable of effectively eliminating hazardous organic pollutants from effluents. In this study, we present a functional soy protein isolate (SPI)/sodium alginate (ALG)/polyethyleneimine (PEI) aerogel prepared via a facile chemical crosslinking process as a novel adsorbent with excellent capabilities for removing toxic methyl blue (MB) dye from effluents. Thanks to the synergistic dense oxygen and nitrogen-containing functional groups in the networks, the ALG/SPI/PEI (ASP) aerogel displayed high adsorption capacity for MB (106.3 mg/g) complying the adsorption kinetics and isotherm with the pseudo-second-order and Langmuir models, respectively. Remarkably, the MB adsorption capability of the ASP aerogel surpasses that of its pristine counterpart and outperforms recently reported adsorbents. Moreover, the aerogel maintained >80% of initial adsorption capability in the fourth regenerative cycle, indicating excellent reusability. The superior MB adsorbability coupled with high-efficiency regenerability in this study reveal the significant potential of ASP aerogel in efficiently eliminating organic dye from wastewater.

Design of Nickel-Containing Nanocomposites Based on Ordered Mesoporous Silica: Synthesis, Structure, and Methylene Blue Adsorption

Mesoporous materials containing heteroelements have a huge potential for use as catalysts, exchangers, and adsorbents due to their tunable nanometer-sized pores and exceptionally large internal surfaces accessible to bulky organic molecules. In the present work, ordered mesoporous silica containing Ni atoms as active sites was synthesized by a new low-temperature method of condensation of silica precursors on a micellar template from aqueous solutions in the presence of nickel salt. The homogeneity of the resulting product was achieved by introducing ammonia and ammonium salt as a buffer to maintain a constant pH value. The obtained materials were characterized by nitrogen sorption, X-ray and neutron diffraction, scanning electron microscopy, infrared spectroscopy, and thermal analysis. Their morphology consists of polydisperse spherical particles 50-300 nm in size, with a hexagonally ordered channel structure, high specific surface area (ABET = 900-1200 m2/g), large pore volume (Vp = 0.70-0.90 cm3/g), average mesopore diameter of about 3 nm, and narrow pore size distribution. Adsorption tests for methylene blue show sorption capacities reaching 39-42 mg/g at alkaline pH. The advantages of producing nickel silicates by this method, in contrast to precipitation from silicon alkoxides, are the low cost of reagents, fire safety, room-temperature processing, and the absence of specific problems associated with the use of ethanol as a solvent, as well as the absence of the inevitable capture of organic matter in the precipitation process.

Techno-economic assessment of waste mandarin biochar as a green adsorbent for binary dye wastewater effluents of methylene blue and basic fuchsin: Lab- and large-scale investigations

Treating polluted wastewater effluents on a large-scale requires the development of high performance and cost-effective adsorbents. The recycling of waste mandarin peels, an environmentally friendly, and copiously available waste biomass into biochar (MRBC), has been approached. In the context of finding affordable and effective solutions for depollution of wastewater, MRBC was used for the adsorption of two dyes: methylene blue (MB) as well as basic fuchsin (BF) from their individual solutions and binary combinations. Batch adsorption studies were performed by employing the Box-Behnken (BB) design. The adsorption competency of dyes was analyzed to find the percentage removal (%R) and the adsorption capacity (qe, mg/g). The dependent parameters (qe and %R) were determined as a function of pH, dose of MRBC (AD), contact time (CT), and concentration of methylene blue [MB]/ basic fuchsin [BF]. Removal of 98.14% of MB and 83.18% of BF was successfully achieved. Equilibrium experiments depicted that Langmuir and Freundlich models suit adsorption of dyes. The maximum adsorption capacity (qmax) was 99.11 (MB) and 78.01 mg/g (BF), individually. However, when the dyes are combined, the qmax decreased to 57.09 and 68.52 mg/g for MB and BF, correspondingly. The cost of MRBC was estimated to be ∼ 4 USD/kg, while the overall cost of wastewater treatment was estimated to be 1.06 USD/m3/year.