Effect of Surfactant on Azithromycin Dihydrate Loaded Stearic Acid Solid Lipid Nanoparticles

Olive oil and flaxseed oil incorporating niosomes for enhanced in vivo anti-diabetic efficacy of canagliflozin

BACKGROUND

Canagliflozin is broadly implicated for the management of type 2 diabetes mellitus. Unfortunately, it has low oral bioavailability due to poor solubility behaviour and restricted membrane permeability.

OBJECTIVE

The current work focuses on development of canagliflozin encapsulated niosomes for enhanced oral anti-diabetic efficacy.

METHODOLOGY

Niosomes comprising span 60 and cholesterol were formulated both in absence and presence of olive oil or flaxseed oil. These were evaluated in vitro for average vesicular size, structural morphology, canagliflozin entrapment efficiency, and drug release. Additionally, the oral hypoglycemic effect of canagliflozin encapsulated niosomes was explored in diabetic rats. Results: The fabricated niosomes were negatively charged spherical vesicles with a size range of 103.0- 141.7nm. These entrapped canagliflozin with efficiency ranging from 92.3% to 96.0%. Drug release investigations reflected that incorporating canagliflozin into niosomes significantly sustained drug release compared to the aqueous drug dispersion. Oral administration of niosomal formulations significantly enhanced the oral antidiabetic effect of canagliflozin. Comparing the tested niosomes, similar efficiency was shown eliminating the effect of composition.

CONCLUSION

The enhanced oral bioavailability of niosomes' encapsulated drugs is related to niosomal vesicular structure which allows intact niosomes absorption. The study presented niosomes as promising carriers for improved oral anti-diabetic activity of canagliflozin.

Design of quetiapine fumarate loaded polyethylene glycol decorated graphene oxide nanosheets: Invitro-exvivo characterization

Quetiapine Fumarate (QF) is an atypical antipsychotic with poor oral bioavailability (9%) due to its low permeability and pH-dependent solubility. Therefore, this study aims to design QF-loaded polyethylene glycol (PEG) functionalized graphene oxide nanosheets (GON) for nasal delivery of QF. In brief, GO was synthesized using a modified Hummers process, followed by ultra-sonication to produce GON. Subsequently, PEG-functionalized GON was prepared using carbodiimide chemistry (PEG-GON). QF was then decorated onto the cage of PEG-GON using the π-π stacking phenomenon (QF@PEG-GON). The QF@PEG-GON nanocomposite underwent several spectral characterizations, in vitro drug release, mucoadhesion study, ex vivo diffusion study, etc. The surface morphology of QF@PEG-GON nanocomposite validates the cracked nature of the nanocomposite, whereas the diffractograms and thermogram of nanocomposite confirm the conversion of QF into an amorphous form with uniform distribution in PEG-GON. Moreover, an ex vivo study of PEG-GON demonstrates superior mucoadhesion capacity due to its surface functional groups and hydrophilicity. The percent drug loading content and percent entrapment efficiency of the nanocomposite were found to be 9.2±0.62% and 92.3±1.02%, respectively. The developed nanocomposite exhibited 43.82±1.65% drug release within 24h, with the Korsemeyer-Peppas model providing the best-fit release kinetics (R2: 0.8614). Here, the interlayer spacing of PEG-GON prevented prompt diffusion of the buffer, leading to a delayed release pattern. In conclusion, the anticipated QF@PEG-GON nanocomposite shows promise as a nanocarrier platform for nasal delivery of QF.

Inhaled Ivermectin-Loaded Lipid Polymer Hybrid Nanoparticles: Development and Characterization

Ivermectin (IVM), a drug originally used for treating parasitic infections, is being explored for its potential applications in cancer therapy. Despite the promising anti-cancer effects of IVM, its low water solubility limits its bioavailability and, consequently, its biological efficacy as an oral formulation. To overcome this challenge, our research focused on developing IVM-loaded lipid polymer hybrid nanoparticles (LPHNPs) designed for potential pulmonary administration. IVM-loaded LPHNPs were developed using the emulsion solvent evaporation method and characterized in terms of particle size, morphology, entrapment efficiency, and release pattern. Solid phase characterization was investigated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Using a Twin stage impinger (TSI) attached to a device, aerosolization properties of the developed LPHNPs were studied at a flow rate of 60 L/min, and IVM was determined by a validated HPLC method. IVM-loaded LPHNPs demonstrated spherical-shaped particles between 302 and 350 nm. Developed formulations showed an entrapment efficiency between 68 and 80% and a sustained 50 to 60% IVM release pattern within 96 h. Carr's index (CI), Hausner ratio (HR), and angle of repose (θ) indicated proper flowability of the fabricated LPHNPs. The in vitro aerosolization analysis revealed fine particle fractions (FPFs) ranging from 18.53% to 24.77%. This in vitro study demonstrates the potential of IVM-loaded LPHNPs as a delivery vehicle through the pulmonary route.

Pharmacokinetics and Histotoxic Profile of a Novel Azithromycin-Loaded Lipid-Based Nanoformulation

Azithromycin traditional formulations possesses poor oral bioavailability which necessitates development of new formulation with enhanced bioavailability of the drug. The objective of current research was to explore the kinetics and safety profile of the newly developed azithromycin lipid-based nanoformulation (AZM-NF). In the in-vitro study of kinetics profiling, azithromycin (AZM) release was assessed using dialysis membrane enclosing equal quantity of either AZM-NF, oral suspension of azithromycin commercial product (AZM-CP), or azithromycin pure drug (AZM-PD) in simulated intestinal fluid. The ex-vivo study was performed using rabbit intestinal segments in physiological salts solution in a tissue bath. The in-vivo study was investigated by oral administration of AZM to rabbits while taking blood samples at predetermined time-intervals, followed by HPLC analysis. The toxicity study was conducted in rats to observe histopathological changes in rat's internal organs. In the in-vitro study, maximum release was 95.38 ± 4.58% for AZM-NF, 72.79 ± 8.85% for AZM-CP, and 46.13 ± 8.19% for AZM-PD (p < 0.0001). The ex-vivo investigation revealed maximum permeation of 85.68 ± 5.87 for AZM-NF and 64.88 ± 5.87% for AZM-CP (p < 0.001). The in-vivo kinetics showed Cmax 0.738 ± 0.038, and 0.599 ± 0.082 µg/ml with Tmax of 4 and 2 h for AZM-NF and AZM-CP respectively (p < 0.01). Histopathological examination revealed compromised myocardial fibers integrity by AZM-CP only, liver and kidney showed mild aberrations by both formulations, with no remarkable changes in the rest of studied organs. The results showed that AZM-NF exhibited significantly enhanced bioavailability with comparative safer profile to AZM-CP investigated.

Controlled delivery of nikkomycin by PEG coated PLGA nanoparticles inhibits chitin synthase to prevent growth of Aspergillus flavus and Aspergillus fumigatus

Aspergillosis is one of the most common fungal infections that can threaten individuals with immune compromised condition. Due to the increasing resistance of pathogens to the existing antifungal drugs, it is difficult to tackle such disease conditions. Whereas, nikkomycin is an emerging safe and effective antifungal drug which causes fungal cell wall disruption by inhibiting chitin synthase. Hence, the study aims at the development of nikkomycin loaded PEG coated PLGA nanoparticles for its increased antifungal efficiency and inhibiting Aspergillus infections. The P-PLGA-Nik NPs were synthesized by w/o/w double emulsification method which resulted in a particle size of 208.3 ± 15 nm with a drug loading of 52.97 %. The NPs showed first order diffusion-controlled drug release which was sustained for 24 h. These nanoparticle's antifungal efficacy was tested using the CLSI - M61 guidelines and the MIC50 defined against Aspergillus flavus and Aspergillus fumigatus was found to be >32 μg/ml which was similar to the nikkomycin MIC. The hyphal tip bursting showed the fungal cell wall disruption. The non-cytotoxic and non-haemolytic nature highlights the drug safety profile.

Carboxylated nanofibrillated cellulose empowers moxifloxacin to overcome Staphylococcus aureus biofilm in bacterial keratitis

Bacterial keratitis is one of the vision-threatening ocular diseases that is increasing at an alarming rate due to antimicrobial resistance. One of the primary causes of antimicrobial resistance could be biofilm formation, which alters the mechanism and physiology of the microorganisms. Even a potent drug fails to inhibit biofilm due to the extracellular polysaccharide matrix surrounding the bacteria, inhibiting the permeation of drugs. Therefore, we aimed to develop carboxylated nanocellulose fibers loaded with moxifloxacin (Mox-cNFC) as a novel drug delivery system to treat bacterial corneal infection. Nanocellulose fibers were fabricated using a two-step method involving citric acid hydrolysis followed by TEMPO oxidation to introduce carboxylated groups (1.12 mmol/g). The Mox-cNFC particles showed controlled drug release till 40 h through diffusion. In vitro biofilm inhibition studies showed the particle's ability to disrupt the biofilm matrix and enhance the drug penetration to achieve optimal concentrations that inhibit the persister cells (without increasing minimum inhibitory concentration), thereby reducing the bacterial drug-resistant property. In vivo studies revealed the therapeutic potential of Mox-cNFC to treat Staphylococcus aureus-induced bacterial keratitis with once-a-day treatment, unlike neat moxifloxacin. Mox-cNFC could improve patient compliance by reducing the frequency of instillation and a controlled drug release to prevent toxicity.

How do lipid-based drug delivery systems affect the pharmacokinetic and tissue distribution of amiodarone? A comparative study of liposomes, solid lipid nanoparticles, and nanoemulsions

Objectives

Lipid-based drug delivery systems (DDS) can improve the pharmacokinetic (PK) parameters of some drugs. Especially those with a high volume of distribution (Vd) leading to off-target accumulation and toxicity. Amiodarone as an anti-arrhythmic agent induces hypothyroidism and liver disorders limiting its clinical indication.

Materials and Methods

In the present study, amiodarone PK parameters and biodistribution after IV administration of four nano-formulations to rats were compared. The formulations were liposomes, solid lipid nanoparticles (SLN), PEGylated SLN (PEG-SLN), and nanoemulsions (NE). All formulations were optimized.

Results

The nanoparticles were spherical with a diameter of 100-200 nm and sustained in vitro drug release in buffer pH 7.4. The best-fitted model for the plasma concentration-time profile was two-compartmental. In vivo studies indicated the most changes in PKs induced after liposome, SLN, and NE administration, respectively. The area under the curve (AUC) and maximum plasma concentration (Cmax) of liposomes, SLN, and NE were 22.5, 2.6, 2.46 times, and 916, 58, and 26 times higher than that of amiodarone solution, respectively (P-value<0.05). The heart-to-liver ratio of amiodarone was higher for nano-formulations compared to drug solution except for liposomes.

Conclusion

Lipid-based particles can improve the PK parameters of amiodarone and its distribution in different tissues.

Brain-targeted delivery of Valsartan using solid lipid nanoparticles labeled with Rhodamine B; a promising technique for mitigating the negative effects of stroke

The brain is a vital organ that is protected from the general circulation and is distinguished by the presence of a relatively impermeable blood brain barrier (BBB). Blood brain barrier prevents the entry of foreign molecules. The current research aims to transport valsartan (Val) across BBB utilizing solid lipid nanoparticles (SLNs) approach to mitigate the adverse effects of stroke. Using a 3²-factorial design, we could investigate and optimize the effect of several variables in order to improve brain permeability of valsartan in a target-specific and sustained-release manner, which led to alleviation of ischemia-induced brain damage. The impact of each of the following independent variables was investigated: lipid concentration (% w/v), surfactant concentration (% w/v), and homogenization speed (RPM) on particle size, zeta potential (ZP), entrapment efficiency (EE) %, and cumulative drug release percentage (CDR) %. TEM images revealed a spherical form of the optimized nanoparticles, with particle size (215.76 ± 7.63 nm), PDI (0.311 ± 0.02), ZP (-15.26 ± 0.58 mV), EE (59.45 ± 0.88%), and CDR (87.59 ± 1.67%) for 72 hours. SLNs formulations showed sustained drug release, which could effectively reduce the dose frequency and improve patient compliance. DSC and X-ray emphasize that Val was encapsulated in the amorphous form. The in-vivo results revealed that the optimized formula successfully delivered Val to the brain through intranasal rout as compared to a pure Val solution and evidenced by the photon imaging and florescence intensity quantification. In a conclusion, the optimized SLN formula (F9) could be a promising therapy for delivering Val to brain, alleviating the negative consequences associated with stroke.

Bedaquiline-Loaded Solid Lipid Nanoparticles Drug Delivery in the Management of Non-Small-Cell Lung Cancer (NSCLC)

Non-small-cell lung cancer (NSCLC) mortality and new case rates are both on the rise. Most patients have fewer treatment options accessible due to side effects from drugs and the emergence of drug resistance. Bedaquiline (BQ), a drug licensed by the FDA to treat tuberculosis (TB), has demonstrated highly effective anti-cancer properties in the past. However, it is difficult to transport the biological barriers because of their limited solubility in water. Our study developed a UPLC method whose calibration curves showed linearity in the range of 5 ng/mL to 500 ng/mL. The UPLC method was developed with a retention time of 1.42 and high accuracy and precision. Its LOQ and LOD were observed to be 10 ng/mL and 5 ng/mL, respectively, whereas in the formulation, capmul MCM C10, Poloxamer 188, and PL90G were selected as solid lipids, surfactants, and co-surfactants, respectively, in the development of SLN. To combat NSCLC, we developed solid lipid nanoparticles (SLNs) loaded with BQ, whereas BQ suspension is prepared by the trituration method using acacia powder, hydroxypropyl methylcellulose, polyvinyl acrylic acid, and BQ. The developed and optimized BQ-SLN3 has a particle size of 144 nm and a zeta potential of (-) 16.3 mV. whereas BQ-loaded SLN3 has observed entrapment efficiency (EE) and loading capacity (LC) of 92.05% and 13.33%, respectively. Further, BQ-loaded suspension revealed a particle size of 1180 nm, a PDI of 0.25, and a zeta potential of -0.0668. whereas the EE and LC of BQ-loaded suspension were revealed to be 88.89% and 11.43%, respectively. The BQ-SLN3 exhibited insignificant variation in particle size, homogeneous dispersion, zeta potential, EE, and LC and remained stable over 90 days of storage at 25 °C/60% RH, whereas at 40 °C/75% RH, BQ-SLN3 observed significant variation in the above-mentioned parameters and remained unstable over 90 days of storage. Meanwhile, the BQ suspension at both 25 °C (60% RH) and 40 °C (75% RH) was found to be stable up to 90 days. The optimized BQ-SLN3 and BQ-suspension were in vitro gastrointestinally stable at pH 1.2 and 6.8, respectively. The in vitro drug release of BQ-SLN3 showed 98.19% up to 12 h at pH 7.2 whereas BQ suspensions observed only 40% drug release up to 4 h at pH 7.2 and maximum drug release of >99% within 4 h at pH 4.0. The mathematical modeling of BQ-SLN3 followed first-order release kinetics followed by a non-Fickian diffusion mechanism. After 24 to 72 h, the IC50 value of BQ-SLN3 was 3.46-fold lower than that of the BQ suspension, whereas the blank SLN observed cell viability of 98.01% and an IC50 of 120 g/mL at the end of 72 h. The bioavailability and higher biodistribution of BQ-SLN3 in the lung tumor were also shown to be greater than those of the BQ suspension. The effects of BQ-SLN3 on antioxidant enzymes, including MDA, SOD, CAT, GSH, and GR, in the treated group were significantly improved and reached the level nearest to that of the control group of rats over the cancer group of rats and the BQ suspension-treated group of rats. Moreover, the pharmacodynamic activity resulted in greater tumor volume and tumor weight reduction by BQ-SLN3 over the BQ suspension-treated group. As far as we are aware, this is the first research to look at the potential of SLN as a repurposed oral drug delivery, and the results suggest that BQ-loaded SLN3 is a better approach for NSCLC due to its better action potential.

How Combined Macrolide Nanomaterials are Effective Against Resistant Pathogens? A Comprehensive Review of the Literature

Macrolide drugs are among the broad-spectrum antibiotics that are considered as "miracle drugs" against infectious diseases that lead to higher morbidity and mortality rates. Nevertheless, their effectiveness is currently at risk owing to the presence of devastating, antimicrobial-resistant microbes. In view of this challenge, nanotechnology-driven innovations are currently being anticipated for promising approaches to overcome antimicrobial resistance. Nowadays, various nanostructures are being developed for the delivery of antimicrobials to counter drug-resistant microbial strains through different mechanisms. Metallic nanoparticle-based delivery of macrolides, particularly using silver and gold nanoparticles (AgNPs & AuNPs), demonstrated a promising outcome with worthy stability, oxidation resistance, and biocompatibility. Similarly, macrolide-conjugated magnetic NPs resulted in an augmented antimicrobial activity and reduced bacterial cell viability against resistant microbes. Liposomal delivery of macrolides also showed favorable synergistic antimicrobial activities in vitro against resistant strains. Loading macrolide drugs into various polymeric nanomaterials resulted in an enhanced zone of inhibition. Intercalated nanomaterials also conveyed an outstanding macrolide delivery characteristic with efficient targeting and controlled drug release against infectious microbes. This review abridges several nano-based delivery approaches for macrolide drugs along with their recent achievements, challenges, and future perspectives.

Permeation enhancers loaded bilosomes for improved intestinal absorption and cytotoxic activity of doxorubicin

The clinical utility of doxorubicin is compromised due to dose related toxic side effects and limited oral bioavailability with no oral formulation being marketed. Enhancement of intestinal absorption and magnification of cytotoxicity can overcome these limitations. Accordingly, the objective was to probe penetration enhancers, bilosomes and their combinations for enhanced intestinal absorption and improved cytotoxicity of doxorubicin. Piperine and dipyridamole were tested as enhancers alone or encapsulated in bilosomes comprising Span60, cholesterol and bile salts. Bilosomes were nanosized spherical vesicles with negative zeta potential and were able to entrap doxorubicin with efficiency ranging from 45.3 % to 53 %. Intestinal absorption studies utilized in-situ rabbit intestinal perfusion which revealed site dependent doxorubicin absorption correlating with regional distribution of efflux transporters. Co-perfusion with the enhancer increased intestinal absorption with further augmentation after bilosomal encapsulation. The latter increased the % fraction absorbed by 4.5-6 and 1.8-2.5-fold from jejuno-ileum and colon, respectively, depending on bilosomes composition. Additionally, doxorubicin cytotoxicity against breast cancer cells (MCF-7) was significantly improved after bilosomal encapsulation and the recorded doxorubicin IC₅₀ value was reduced from 13.3 μM to 0.1 μM for the best formulation. The study introduced bilosomes encapsulating absorption enhancers as promising carriers for enhanced cytotoxicity and oral absorption of doxorubicin.

Physicochemical Characterization of Chitosan-Decorated Finasteride Solid Lipid Nanoparticles for Skin Drug Delivery

Finasteride is considered the drug of choice for androgenic alopecia and benign prostate hyperplasia. The aim of the study was to formulate nanodrug carriers of finasteride with enhanced retentive properties in the skin. The finasteride was formulated as solid lipid nanoparticles that were decorated with different concentrations of chitosan for improved retentive properties. Solid lipid nanoparticles (SLNs) were synthesized by “high-speed homogenization technique” using stearic acid as a solid lipid while PEG-6000 and Tween-80 were used as surfactants. The SLNs were evaluated for particle size, polydispersity index (PDI), zeta potential, drug entrapment efficiency, and drug release behavior. The mean particle size of SLNs was in the range of 10.10 nm to 144.2 nm. The PDI ranged from 0.244 to 0.412 while zeta potential was in the range of 8.9 mV to 62.6 mV. The drug entrapment efficiency in chitosan undecorated formulations was 48.3% while an increase in drug entrapment was observed in chitosan-decorated formulations (51.1% to 62%). The in vitro drug release studies of SLNs showed an extended drug release for 24 hours after 4 hours of initial burst release. The extended drug release was observed in chitosan-coated SLNs in comparison with uncoated nanoparticles. The permeation and retention study revealed higher retention of drug in the skin and low permeation with chitosan-decorated SLNs that ranged from 39.4 μg/cm² to 13.2 μg/cm². TEM images depicted spherical shape of SLNs. The stability study confirmed stable formulations in temperature range of 5°C and 40°C for three months. It is concluded from this study that the SLNs of finasteride were successfully formulated and chitosan decoration enhanced the drug retention in the skin layers. Therefore, these formulations could be used in androgenic alopecia and benign prostate hyperplasia to avoid the side effects, drug degradation, and prolonged use of drug with conventional oral therapy.

Cyclodextrin Derivative Enhances the Ophthalmic Delivery of Poorly Soluble Azithromycin

Azithromycin (AZM), a macrolide antibiotic used for the treatment of chlamydial conjunctivitis, is less effective for the treatment of this disease due to its poor bioavailability (38%). Various alternatives have been developed for improving the physicochemical properties (i.e., solubility) of the AZM without much success. To overcome the problems associated with AZM, an inclusion complex employing a modified cyclodextrin, i.e., sulfobutylether-β-cyclodextrin (SBE-β-CD), was prepared and characterized by phase solubility studies and PXRD techniques. The results portrayed the formation of an inclusion complex of AZM with SBE-β-CD in 1:2 molar stoichiometric ratios. This inclusion complex was later incorporated into a polymer matrix to prepare an in situ gel. Various combinations of Carbopol 934P and hydroxypropyl methylcellulose (HPMC K4M) polymers were used and evaluated by rheological and in vitro drug release studies. The optimized formulation (F4) containing Carbopol 934P (0.2% w/v) and HPMC K4M (0.2% w/v) was evaluated for clarity, pH, gelling capacity, drug content, rheological properties, in vitro drug release pattern, ocular irritation test, and antimicrobial efficacy. Finally, owing to the improved antimicrobial efficacy and increased residence time, the AZM:SBE-β-CD in situ gel was found to be a promising formulation for the efficient treatment of bacterial ocular disease.

Assessment of nano lipid carrier loaded transdermal patch of rizatriptan benzoate

BACKGROUND

Migraine is a neurological disorder and is accompanied by different painful episodes. Hence the maintenance of a steady-state concentration of drug can be beneficial for the patients suffering with migraine. The present investigation focuses on the development of nano lipid carriers (NLCs) loaded transdermal patch of rizatriptan benzoate to sustain the effect of the drug for the enhancement of therapeutic effects.

METHOD

Stearic acid and peanut oil were used to make the NLCs. A central composite design was employed to observe the effect of formulation factors like solid lipid ratio, phase volume ratio, and concentration of surfactants on the formation of nanoparticles. The effects were evaluated for the responses like particle size and entrapment of the drug in the nanocarriers. The optimized formulation was subjected to compatibility, thermal, surface characteristics, and surface morphology studies. The optimized formulation was dispersed in HPMC 15CPS and PVP K30 polymer matrix and the transdermal patch was evaluated for its mechanical properties, drug release study, and skin irritation study.

RESULTS

The experimental design was suitable to produce nanosized stable lipid carriers of the drug with high drug entrapment. The drug and excipients were found to be compatible. The thermal and surface characteristics study proved the high loading of drug in the nanoparticles. The surface morphology study showed the formation of irregular-shaped NLCs. The transdermal patch had good mechanical properties. The ex vivo study of the formulated patch showed a sustained release of the drug over 24h. No skin irritation was reported from the transdermal patch.

CONCLUSION

Therefore, it can be concluded that the nanoparticles loaded transdermal patch of rizatriptan benzoate can be promising in controlling the divergent phases of migraine.

Development and Evaluation of Solid Witepsol Nanoparticles for Gene Delivery

Objectives

Gene therapy approaches have become increasingly attractive in the medical, pharmaceutical, and biotechnological industries due to their applicability in the treatment of diseases with no effective conventional therapy. Non-viral delivery using cationic solid lipid nanoparticles (cSLNs) can be useful to introduce large nucleic acids to target cells. A careful selection of components and their amounts is critical to obtain a successful delivery system. In this study, solid Witepsol nanoparticles were formulated, characterized, and evaluated in vitro for gene delivery purposes.

Materials and Methods

Solid Witepsol nanoparticles were formulated through the microemulsion dilution technique using two grades of Witepsol and three surfactants, namely Cremephor RH40, Kolliphor HS15, and Peceol. Dimethyldioctadecylammonium bromide was incorporated into the system as a cationic lipid. Twelve combinations of these ingredients were formulated. The obtained nanoparticles were then evaluated for particle size, zeta potential, DNA binding and protection ability, cytotoxicity, and transfection ability.

Results

Particle sizes of the prepared cationic cSLNs were between 13.43±0.06 and 68.80±0.78 nm. Their zeta potential, which is important for DNA binding efficiency, was determined at >+40 mV. Gel retardation assays revealed that the obtained cSLNs can form a compact complex with plasmid DNA (pDNA) encoding green fluorescent protein and that this complex can protect pDNA from DNase I-mediated degradation. Cytotoxicity evaluation of nanoparticles was performed on the L929 cell line. In vitro transfection data revealed that solid Witepsol nanoparticles could effectively transfect fibroblasts.

Conclusion

Our findings indicate that solid Witepsol nanoparticles prepared using the microemulsion dilution technique are promising non-viral delivery systems for gene therapy.

In vitro evaluation of mucoadhesive in situ nanogel of celecoxib for buccal delivery

OBJECTIVE

The research aims for finding the possibility of buccal delivery of celecoxib from an in situ mucoadhesive nanogel, and in vitro evaluation of the gel to evidence the enhanced permeation of drug from buccal mucosa.

MATERIALS AND METHODS

Six formulations of celecoxib loaded NLCs were prepared using stearic acid and oleic acid in different ratio in aqueous solution of poloxamer by emulsion solvent evaporation technique. The physicochemical evaluations of the celecoxib loaded NLC (CeL-NLC) were carried out. The formulation F4 was selected as the best and subjected for FTIR, DSC, PXRD, and surface morphology study. In situ mucoadhesive gel was prepared with F4 in HPC, HPMC and Carbopol 934 gelling systems. The gels were evaluated for their mechanical and rheological properties and in vitro permeation studies through rabbit oral mucosa.

RESULTS

The selected process at high shear homogenization could yield nanoparticles of desired physiochemical properties. The drug and excipients were compatible as disseminated from FTIR study. Transformation of the crystal form to amorphous form of celecoxib was revealed by the solid-state characterization studies. The AFM study unfold the formation of discrete asymmetric nano particles. All mucoadhesive gels found to have good mucoadhesion and rheological property with good in vitro permeation of drug. A comparative study and statistical analysis unveiled that gel containing Carbopol 934 was found to be the best mucoadhesive in situ gel of nano particles of celecoxib with enhanced permeation parameters.

CONCLUSION

Therefore, the above in vitro evaluation of in situ mucoadhesive nano gel proved the potential of the formulation as a promising buccal delivery of celecoxib.

In vitro cytotoxicity studies of smart pH-sensitive lamivudine-loaded CaAl-LDH magnetic nanoparticles against Mel-Rm and A-549 cancer cells

In this study, an effective nano-drug delivery system was prepared by the co-precipitation method via two steps; the preparation of Fe₃O₄ magnetic nanoparticles and its surface modification with layered double hydroxide (LDH) and loading lamivudine on this nanocarrier (Fe₃O₄@CaAl-LDH@Lamivudine). The developed nanoparticles (NPs) were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray analysis, Fourier-transformed infrared spectroscopy, vibrating-sample magnetometry, thermogravimetric analysis, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller. The prepared system demonstrated an average size of 130 nm. Also, the drug entrapment efficiency was estimated at ∼70%. In vitro, drug release investigations showed a controlled and pH-dependent lamivudine release over 300 min. The in vitro cytotoxic activity of Fe₃O₄@CaAl-LDH@Lamivudine NPs was explored against Mel-Rm and A-549 cancer cell lines in comparison with lamivudine and nanocarrier using lactate dehydrogenase colorimetric and MTT assay. The results of the MTT assay revealed that the Fe₃O₄@CaAl-LDH@Lamivudine NPs significantly inhibited the proliferation of Mel-Rm and A-549 cells in a dose-dependent manner. The influences of Fe₃O₄@CaAl-LDH@Lamivudine on the cancer cell lines by different therapeutic investigation illustrated the remarkable effect in comparison with free drug. Finally, the achieved consequences confirm the anticancer properties of Fe₃O₄@CaAl-LDH@Lamivudine and indicate that they may be a cost-effective substitute in the treatment of lung and skin cancer.Communicated by Ramaswamy H. Sarma.