Enhancement of Ni-Zn ferrite nanoparticles parameters via cerium element for optoelectronic and energy applications

This work is concerned with fabricating ferrite nanoparticles of nickel-zinc with the chemical formula: Ni0.55Zn0.45Fe2-xCexO4, 0 ≤ x ≤ 0.011 by co-deposition technique and modifying their electrical, microscopic, spectroscopic, optical, electrical and dielectric properties as advanced engineering materials through doping with the cerium (Ce) element. XRD patterns displayed that the samples have a monophasic Cerium-Nickel-zinc (CNZ) spinel structure without other impurities for cerium concentration (x) ≤ 0.066. Both values of crystallite size and lattice parameters decrease from 33.643 to 23.137 nm and from 8.385 to 8.353 nm, respectively, with the increasing Ce ions substitution content from 0 to 0.066. SEM images indicate that grains of the fabricated compounds are smaller, more perfect, more homogeneous, and less agglomeration than those of the un-doped Ni-Zn nano-ferrites. The maximum intensity of first-order Raman spectral peaks (Eg, F2g(2), A1g(2), and A1g(1)) of CNZ ferrite nanoparticles are observed at about (330, 475, 650, 695) cm-1, respectively, that confirms the CNZ samples have the cubic spinel structure. The direct and indirect optical energy bandgaps of CNZ samples have a wide spectrum of values from semiconductors to insulators according to cerium concentration. The results showed that the values of dielectric constant, dielectric loss factor, and Ac conductivity and the conductivity transition temperature are sensitive to cerium ions content. AC conductivity exhibited by the CNZ samples has the semiconductor materials behavior, where the AC conductivity increases due to temperature or doping concentration. The results indicate that Ni0.55Zn0.45Fe1.944Ce0.066O4 ferrite nanoparticles may be selected for optoelectronic devices, high-frequency circuits, and energy storage applications.

Comprehensive review on the efficiency of ionic liquid materials for membrane separation and environmental applications

In the current twenty years, industrial applications of ionic liquids (ILs) have been of paramount attention due to their indisputable positive characteristics like negligible volatility and chemical/thermal stability. These brilliant advantages open new horizons towards environmentally friendly application of ILs in several industrial activities like membrane-based CO₂ separation, electrolyte, bioprocessing, targeted drug delivery and solar panels. The principal intention of this article is to prepare a comprehensive review on the potential efficiency of IL-based absorbents to separate CO₂ acidic contaminant from industrial gaseous streams compared to alkanolamine absorbents as the benchmark. For this purpose, a techno-economic evaluation is presented to compare the cost-effectiveness of ILs compared to alkanolamine absorbents. Finally, major environmental impacts of the ILs applications in industries are discussed and future perspectives towards solving the operational challenges are presented in detail.

LIBS assisted PCA analysis of multiple rare-earth elements (La, Ce, Nd, Sm, and Yb) in phosphorite deposits

In the present study, the immediate detection of rare-earth elements (REEs) in phosphorite deposits has been reported using laser-induced breakdown spectroscopy (LIBS). Numerous emission lines corresponding to the REEs such as lanthanum (La), cerium (Ce), neodymium (Nd), samarium (Sm), and ytterbium (Yb), have been detected in the emission spectra of phosphorite-induced plasma plume. For the quantitative analysis, we employed the calibration-free LIBS (CF-LIBS), and Energy Dispersive X-ray (EDX) spectroscopy techniques. The results obtained using the CF-LIBS technique show excellent agreement with that obtained by EDX. Besides principal component analysis (PCA) was employed by incorporating the LIBS spectral data of rare earth phosphorite rocks samples containing La, Ce, Nd, Sm, and Yb emission lines. The first three PCs were observed using LIBS spectral data set showing a covariance (interpretation rate) up to 76.3%. This study suggests that LIBS yields a quick and very reliable qualitative and quantitative analysis of REEs in any geological ore sample.

Drug-induced weight gain in the last 10 years: a descriptive study

Medication-induced weight gain can be frustrating to patients and health care providers. Drug-induced weight gain is a profound side effect of numerous commonly used medications. The present study aimed to investigate FAERS reports about drug-induced weight gain in the last ten years. Using the US FDA Adverse Event Reporting System (FAERS) between 2012 and 2021, a retrospective, descriptive analysis was conducted to analyze the major reported Adverse Events about weight gain. During the last ten years, 137370 reports were submitted to FAERS about drug-induced weight gain. The most common drugs that are reported by the patients and that are associated with weight gain were risperidone (11.55%), adalimumab (3.94%), pregabalin (3.86%), aripiprazole (3.1%), etanercept (2.72%), and prednisone (2.70%). In conclusion, the present study showed that drug-induced weight gain is a common side effect of several medications frequently used to treat chronic diseases. Healthcare providers should educate their patients about the medicines that may cause weight gain.

Clinical presentation, disease course, and outcome of COVID-19 in hospitalized patients with and without pre-existing cardiac disease: a cohort study across 18 countries

AIMS

Patients with cardiac disease are considered high risk for poor outcomes following hospitalization with COVID-19. The primary aim of this study was to evaluate heterogeneity in associations between various heart disease subtypes and in-hospital mortality.

METHODS AND RESULTS

We used data from the CAPACITY-COVID registry and LEOSS study. Multivariable Poisson regression models were fitted to assess the association between different types of pre-existing heart disease and in-hospital mortality. A total of 16 511 patients with COVID-19 were included (21.1% aged 66-75 years; 40.2% female) and 31.5% had a history of heart disease. Patients with heart disease were older, predominantly male, and often had other comorbid conditions when compared with those without. Mortality was higher in patients with cardiac disease (29.7%; n = 1545 vs. 15.9%; n = 1797). However, following multivariable adjustment, this difference was not significant [adjusted risk ratio (aRR) 1.08, 95% confidence interval (CI) 1.02-1.15; P = 0.12 (corrected for multiple testing)]. Associations with in-hospital mortality by heart disease subtypes differed considerably, with the strongest association for heart failure (aRR 1.19, 95% CI 1.10-1.30; P < 0.018) particularly for severe (New York Heart Association class III/IV) heart failure (aRR 1.41, 95% CI 1.20-1.64; P < 0.018). None of the other heart disease subtypes, including ischaemic heart disease, remained significant after multivariable adjustment. Serious cardiac complications were diagnosed in <1% of patients.

CONCLUSION

Considerable heterogeneity exists in the strength of association between heart disease subtypes and in-hospital mortality. Of all patients with heart disease, those with heart failure are at greatest risk of death when hospitalized with COVID-19. Serious cardiac complications are rare during hospitalization.

Effectiveness of a Chairside Acrylic Adjustment Cabinet in Reducing Dental Acrylic Debris and Aerosols

PURPOSE

Chairside prosthesis adjustment procedures generate contaminated acrylic particle debris that include visible splatter (particles >50 μm) as well as invisible aerosols (<50 µm). The purpose of this study was to evaluate the effectiveness of a chairside acrylic adjustment cabinet (CAAC) in reducing airborne aerosol particles (<10 µm) and visible acrylic debris, time required for airborne aerosols to return to baseline levels after an acrylic adjustment procedure, and the effect on operatory turnover time.

MATERIALS AND METHODS

A total of 40 acrylic adjustment procedures were carried out in a simulated setting with (experiment) and without (control) a CAAC. Standardized acrylic samples of self-polymerized, and heat polymerized polymethylmethacrylate resins, Triad™ and Fastray™ custom tray materials were evaluated. Airborne aerosol measurements were done using a handheld Lase.r Particle Counter for absolute particle counts of sizes 0.3, 0.5, 1.0, 2.5, 5.0, and 10.0 μm before, during, and immediately after adjustment and 10 minutes postadjustment. Spread of aerosols was assessed at three distinct locations within the dental operatory specific to the provider, the patient, and the caregiver/guest. Visible acrylic debris and operatory turnover time were evaluated immediately postadjustments by a blinded investigator. Repeated measures ANOVA was used to estimate group effect, time effect and interaction between group and time for air particle analysis. Independent samples T-tests were used for group differences between operatory turnover time, and time for aerosols to return to baseline. Chi-square test was used for visible surface analysis.

RESULTS

In the control group, total aerosol particle counts increased from 6542.7 ± 162.6 particles at baseline to 598378.7 ± 586363.2 and 367569.9 ± 432220.8 particles during and immediately postadjustment, respectively. Adjustments made in the experiment group led to significantly reduced aerosol counts during (97738.9 ± 97866.5) and immediately postadjustment (19786.5 ± 14004.9; F = 17.8, p = 0.006). Similar trends were noted for the patient and guest positions. Time for aerosol particles to return to baseline was significantly lower in the experiment group (20.56 ± 14.5 minutes) compared to the control group (37.9 ± 31.96 minutes; p = 0.03). Visible acrylic debris analysis showed a significant decrease of 78% in the experiment group (p < 0.001). No significant differences were noted in operatory turnover time between the two groups (p = 0.61).

CONCLUSIONS

Acrylic adjustment procedures generated aerosols of particle sizes less than 10 µm and were measured in significant quantities throughout the dental operatory for up to 115 minutes. Chairside acrylic adjustment cabinets significantly decreased airborne aerosols, visible acrylic particle debris, and reduced the time for airborne aerosols to return to baseline levels.

The ESC ACCA EAPCI EORP acute coronary syndrome ST-elevation myocardial infarction registry

Aims 

The Acute Cardiac Care Association (ACCA)–European Association of Percutaneous Coronary Intervention (EAPCI) Registry on ST-elevation myocardial infarction (STEMI) of the EurObservational programme (EORP) of the European Society of Cardiology (ESC) registry aimed to determine the current state of the use of reperfusion therapy in ESC member and ESC affiliated countries and the adherence to ESC STEMI guidelines in patients with STEMI.

Methods and results 

Between 1 January 2015 and 31 March 2018, a total of 11 462 patients admitted with an initial diagnosis of STEMI according to the 2012 ESC STEMI guidelines were enrolled. Individual patient data were collected across 196 centres and 29 countries. Among the centres, there were 136 percutaneous coronary intervention centres and 91 with cardiac surgery on-site. The majority of centres (129/196) were part of a STEMI network. The main objective of this study was to describe the demographic, clinical, and angiographic characteristics of patients with STEMI. Other objectives include to assess management patterns and in particular the current use of reperfusion therapies and to evaluate how recommendations of most recent STEMI European guidelines regarding reperfusion therapies and adjunctive pharmacological and non-pharmacological treatments are adopted in clinical practice and how their application can impact on patients’ outcomes. Patients will be followed for 1 year after admission.

Conclusion 

The ESC ACCA-EAPCI EORP ACS STEMI registry is an international registry of care and outcomes of patients hospitalized with STEMI. It will provide insights into the contemporary patient profile, management patterns, and 1-year outcome of patients with STEMI.

Selective cell adhesion on femtosecond laser-microstructured polydimethylsiloxane

We show that femtosecond laser irradiation of polydimethylsiloxane (PDMS) enables selective and patterned cell growth by altering the wetting properties of the surface associated with chemical and/or topographical changes. In the low pulse energy regime, the surface becomes less hydrophobic and exhibits a low water contact angle compared to the pristine material. X-ray photoelectron spectroscopy (XPS) also reveals an increased oxygen content in the irradiated regions, to which the C2C12 cells and rabbit anti-mouse protein were found to attach preferentially. In the high pulse energy regime, the laser-modified regions exhibit superhydrophobicity and were found to inhibit cell adhesion, whereas cells were found to attach to the surrounding regions due to the presence of nanoscale debris generated by the ablation process.