Obesity, bariatric surgery and periodontal disease: a literature update

Obesity is linked to other systemic diseases, such as diabetes mellitus, dyslipidemia, and arterial hypertension. These comorbidities increase the risk of developing cardiovascular disease risk. Adipose tissue is a true endocrine organ and releases various pro-inflammatory cytokines. Periodontal disease (PD) is a chronic inflammatory disorder of the gingiva and bone support (periodontal tissues) that surrounds the teeth. The relationship between obesity and an increased risk of developing PD is already known in the literature. Many studies correlated the cardiometabolic risk with periodontal disease. Bariatric surgery is a way to reduce the adipose tissue in obese patients, that meet specific criteria. It has been observed that this type of surgery usually reduces both the systemic inflammation and the cardiometabolic risk. Some authors have hypothesized that, as a result, the progression of periodontal disease is also reduced. Five articles are analyzed in this systematic review. In these papers, the periodontal health before and after the bariatric surgery was compared. However, the conclusion of the previous studies demonstrated a scarce literature and did not confirm the reduction of periodontal disease after bariatric surgery, but a reduction of cardiometabolic risk. Therefore, periodontal disease in no way influences the reduction of cardiovascular risk after bariatric surgery.

Diode laser as an adjunct to nonsurgical chronic periodontitis therapy: a review

The aim of this review was to investigate the additional effects of diode laser irradiation in combination with nonsurgical periodontal therapy. An electronic search of publications was established from three electronic databases: Cochrane, PubMed and Web of Science. The search strategy used a combination of controlled vocabulary and free-text words. Inclusion and exclusion criteria were defined by the authors before the start of the study. The inclusion criteria were all studies published in English language, randomized controlled trials, based on human subjects. All trials were designed to evaluate the efficacy of the diode laser therapy as an adjunct to nonsurgical periodontal therapy in the treatment of chronic periodontitis patients. All studies analyzed are not older than five years. The search resulted in 188 titles. After the analysis of the abstracts, an article was excluded because it was not relevant for the study and two because it treated aggressive periodontitis. At the end only 6 articles were included in the qualitative analysis. The potential role in chronic periodontal disease treatment of diode laser is still not demonstrated. Several studies regard the diode laser therapy, but there is still heterogeneity for what it concerns research and clinical protocols. As a result, several randomized controlled trials are needed to obtain certain data.

Convergent implant transmucosal collar and healing abutment: aesthetics influence on soft tissues. A clinical study

Two conditions are necessary for a correct and functional prosthetic implant rehabilitation: maintaining pre-implant soft tissue health and stability of bone tissue, in terms of implant osseous-integration and maintenance of optimal crestal attachment levels. In addition to these parameters - necessary for the longevity of the restoration - one of the main aspects of therapy is the achievement of a final aesthetic that reproduces as faithfully as possible the natural anatomy of the lost tooth and the associated soft tissues. To achieve this last objective, an implant system was designed and used by our group. This implant is characterized by a convergent trans-mucosal emergence fixture associated with a progressive closing system of trans-mucosa healing pillars (healing abutment). This guarantee, together with the micro and macrostructure of the implant, an immediate and highly aesthetic condition of the peri-implant soft tissues, and in the same time an optimal seal on the convergent neck of the implant itself.

Transgingival implants with a convergent collar (PRAMA); surgical and screwed prosthetic approach. A case report

This article presents a case report of transmucosal implant with a convergent collar (PRAMA) inserted in the anterior maxillary esthetic area. The purpose of this study is to evaluate soft and hard tissue after 12 months. One implant was placed in the esthetic area. The implant was immediately loaded with a screwed provisional prosthesis. After 3 months the definitive screwed prosthesis was inserted. The patient was reassessed 12 months post-implant placement, and during the examination, the soft-tissue texture, color, and amount of keratinized tissue was checked. No statistically significant horizontal dimensional changes of the alveolar ridge were observed between each time-point. Mean soft tissue levels significantly improved between base-line and 12 months. The reduced buccal width of the transmucosal component gives more space to the gingival thickness and promotes stability and give a better seal. The use of transmucosal implant creates a shift of the inflammatory cell infiltrate away from the crestal bone level.

Influence of implant scanbody material and operator on scanning fluency and polygonal mesh numbers of digital impression: an in vitro study

The purpose of this study is to evaluate the influence of implant scanbody (ISB) material and operator on scanning fluency and polygonal mesh numbers of a confocal microscopy intraoral scanning (IOS). An edentulous maxillary master model with 6 implant analogues was assembled. Thereafter 3 ISBs featured with same geometry but different materials (polyetheretherketone (PK), titanium (T) and PK with a titanium base (PKT)) were produce and scanned according to a randomized sequence by three different operators. The confocal microscopy IOS resulted in 45 STL test files that were processed to a dedicate software to obtain the request data. The overall analysis of fluency (imm/sec) showed the following results: mean 11.997 imm/sec, SD 2.355. The multivariate analysis showed statistical significance of material (p<.0001) and operator (p<.0001) influence. The univariate analysis referred to polygonal mesh numbers expressed the following results: mean 30327.8, SD 2432.5. The multivariate analysis stressed how there is a related effect to materials (p<.0001) and operator (p=0.0205). PKT represented the material with the best results for both. Analyzing the overall distribution histogram for scanning fluency, the IOS device seems to work with higher frequency at level of 13 imm/sec. The distribution of the measurements in the reference histograms showed an effect related to both variables referring to scanning fluency as well as to polygonal mesh numbers. Operator can be considered as a random effect; regarding the materials, the difference between PKT and PK can be related to the different base material. The dissimilar optical properties of T justify the different behavior.

Foreign body granuloma in the maxillofacial region: a case report

Foreign bodies can penetrate in soft tissues of the maxillofacial region through injuries and cutaneous lacerations from trauma. Most commonly found bodies are glass, metal and wood. We report the case of a 50-year-old male patient who came to our maxillofacial department complaining about the presence of an intraoral nodule located in the right upper gingival mucosa. The patient reported the story of a road accident, three months earlier, falling from a scooter without the aid of a protective helmet.

Autologous tooth graft: a histological comparison between dentin mixed with xenograft and dentin alone grafts in socket preservation

The aim of this study is to compare the histological results after socket preservation between dentin mixed with xenograft and dentin alone in tooth graft procedure. Six patients were included in this prospective case series study and treated in three clinical centers using standardized clinical procedures. This clinical trial enrolled patients with three walls post-extractive defects requiring the restoration of bone dimension and shape in mandibular zone. The patients were divided in two groups: extracted teeth alone (first group) and extracted teeth mixed with equal quantity of xenograft (second group). The extracted tooth was cleaned and processed by a recently introduced automated device, that allows fragmentation and partial demineralization of the tooth matrix and used as graft material. The graft obtained in this way, was inserted at the time of the extraction. A covering membrane was used to protect the graft. Implants were placed after 4 months of healing. Bone biopsies of the all grafted sites were taken at the time of implant surgery, for histological analysis. Descriptive statistics was used to synthesize the results, using mean values and standard deviations. Six patients (5 women, mean age at surgery 50.3±12.1 years) were treated and after 4 months of healing both groups, grafts height appeared stable. No signs of infection were present. Bone biopsy were taken in all grafted sites (3 with group one and 3 with group two). The histologic analysis revealed no inflammatory or infective reaction against both groups. The histomorphometry results between the two groups are different. The first group show an amount of new bone greater than the second group (+85.29%) and minor quantity of residual graft (-83.59%). The dentin alone shows a larger amount of new bone.

Immediate restoration of a single upper central integrating digital workflow and a novel dental implant: a case report

The aim of this study is to report the integrated digital workflow with a novel dental implant to rehabilitate a single tooth in a high value aesthetic zone. A 50-year-old man asked to rehabilitate tooth 1.1. The use of an integrated digital workflow in combination with computer guided surgery allow the clinician to visualize all patient's information when planning the rehabilitation in order to obtain a more predictable and a less invasive surgery. After two months of follow-up there were no biological or prosthetic issues. Within the limitation of this study, the digital workflow to rehabilitate a high value aesthetic zone could improve predictability and accuracy in immediate loading restoration.

Articular disc of temporomandibular joint: an anatomical and histological study. Functional considerations

The articular disc is an important component of the temporomandibular joint, whose morphology has been studied on autopsy and biopsy materials. The normal posterior attachment of the disc is usually described as having two layers, one upper and one lower. The upper layer consists of elastic fibres, collagen fibres, fat deposits and blood vessels. It is connected posteriorly to the anterior face of the post-glenoid tubercle, the tympanic wall of the temporal bone, the cartilaginous meatus and the parotid gland lining. The lower layer, on the other hand, consists of a compact lamina of non-elastic collagen fibres, attached to the posterior surface of the condyle. Elastic fibres are one of the main constituents of the extracellular matrix of many connective tissues, and they are believed to play a very important role in the normal functions of many tissues such as blood vessels, lungs and dermis. The existence and functional importance of a fibroelastic tissue in the upper layer of the posterior portion of the articular disc has been described in human TMJ and in joints of many animal species. In human TMJ, it is believed that elastic fibres in the posterior and anterior attachment regions may play an important role in the repositioning of the disc during jaw closure. This study presents a review of the current literature on the morphology of elastic fibres in the posterior portion of the joint disc and the role attributed to them during all functions.

Healing of the post extractive socket: technique for conservation of alveolar crest by a coronal seal

The first aim of the following experimental study was to assess bone changes in the horizontal and vertical dimension when using different socket preservation procedures. The second objective of our work was also to compare two clinical methods of coronal seal's management: an experimental group was treated using the natural extracted tooth; another experimental group saw the use of a provisional resin preformed as a seal technique. In twelve patients a premolar tooth was extracted without elevation of a mucoperiosteal flap and the patients were randomly distributed into four groups. The first and second group was considered as a control groups: in the first, the extraction socket was left with its blood clot and interrupted sutures were applied; In the second, the extraction socket was filled with BioOss Collagen (Geistlich Biomaterials, Wolhusen, Switzerland) and a free gingival graft was sutured to cover the socket. The third and fourth groups was considered as a test group. In the third group, after tooth extraction, for aesthetic reasons, the root of the natural dental element is cut to allow immediate temporary prosthesis. In the fourth group, as in group 3, the patient is discharged through a temporary restoration performed or by the dental technician or directly to the chair. Standardized photographs were taken eight months after tooth extraction. Five competent observers analyzed the esthetic outcome according to the PES. To assess the level of bone healing at the extraction site, the following parameters were evaluated: 1) changes in soft tissue and 2) changes in bone level. As for soft tissues, they were assessed using the PES score by two assessments, four weeks apart. The overall scores of the four treatment groups revealed PES values of 8.47 (SD 2.08, group 3), 6.62 (SD 3.24, group 4). The differences between groups 1 and 2 and were statistically significant (P=0.015 and P=0.047). The single parameter analysis displayed a certain range of fluctuation and heterogeneity. As regards hard tissue, during the 6-month period, bone remodeling occurred in all four experimental groups with different percentages. The mean vertical loss of the buccal bone plate for the Tx 1 group was -2 ± 0.2 mm. The Tx 2 group showed vertical loss of - 0.34 ± 0.2 mm. The Tx 3 group demonstrated - 0.3 mm of mean vertical loss and the 4 groups demonstrated -0.46 of mean vertical loss. The horizontal dimension of the alveolar process was 13.5 ± 0.1 mm, 7.6 ± 0.1 mm e 6.7 ± 0.1 mm at the three different levels for the Tx 1 group. The Tx 2 group depicted bone dimensions of 14.4 ± 0.2 mm, 13.7 ± 0.3 mm e 13.4 ± 0.1 mm. The horizontal dimension of the Tx 3 - Tx 4 group was 13.7 ± 0.3 mm, 13.1 ± 0.1 mm e 13 ± 0.1 mm and 13.5 ± 0.1 mm, 13.2 ± 0.1 mm e 12.9 ± 0.1 mm. The findings from the present study disclose that incorporation of coronal seals define a particular respect to the buccal bone plate.

Periodontal disease in subjects suffering from coronary heart disease

The aim of present study is to evaluate the greater risk of periodontal disease in subjects affected by cardiovascular disease. The statistical study includes 200 patients equally divided into a test and a control group. The test group is made up of hospitalized patients from the cardiology division of the S. Salvatore hospital of L'Aquila and the second made up of subjects that frequented a dental clinic. All patients were subject to anamnesis and clinical evaluation for periodontal disease. The index used for this clinical examination were CPTIN index (Community Periodontal Index for Treatment Needs), pocket depth index (PPD), probing bleeding index (PBI), and plaque index (Silness, Loe). All data were collected and a comparative analysis was done of the results obtained from the two groups. Analysing the data concerning the average of lost and present teeth in the oral cavity and the damage of periodontal attachment we notice that cardiopathic subjects had a loss of periodontal attachment 2 times greater than in the control group and major condition of edentulism. A frequency test called the "chi-square test" showed that cardiopathic patients had a greater frequency of periodontal disease. The development of periodontal disease in subject suffering from coronary heart disease is faster and more aggressive than in healthy subjects. Therefore, the prevention of periodontal disease is simple and effective way to reduce the risk of cardiovascular disease.

Application of the radiosurgery assisted gingival displacement technique in the aesthetic area: a case report

The use of digital tools offers a new perspective to daily clinical activities even though sometimes different clinical approaches are necessary. This case report of a maxillary anterior rehabilitation demonstrates the application of a gingival displacement technique to enhance the recording of subgingival finish line by means of an intraoral optical scanner (IOS). The temporary restoration was used as a guide for the radiosurgery tip in order to displace the gingiva in a guided and mini-invasive approach. It was then possible to create the space between the tooth structure and the soft tissues for the light beam of the IOS to properly detect the finish lines of the dental preparation. Six single porcelain fused to zirconia crowns were delivered. This technique could be considered as a solution of complex cases with subgingival dental preparation to be detected by means of an IOS.

Fit evaluation of cad/cam fabricated all-ceramic restorations based on direct and indirect digitalization in vivo: a systematic review

The aim of this study was to compare the fit of all-ceramic restorations on natural teeth fabricated through a direct digital workflow or an indirect digital workflow. An electronic search of publications was established from three electronic databases: Cochrane, PubMed and Web of Science. The search strategy used a combination of controlled vocabulary and free-text words. The detailed search design and strategies, including keywords, are presented below. The authors used two filters to follow data for the research: papers written in English and published in the last 5 years. The search resulted in 3042 titles. Following the first stage of screening, after the records identification through database manual searching, 3047 potentially relevant studies were identified. After the second stage screening, 38 full text publications were obtained and analyzed and 17 were excluded. Afterwards, 22 articles resulted eligible after full text reading and a cross search of the articles references was accomplished and 5 articles were consequently added. At last, 6 articles were included in the quantitative analysis. This study was designed to compare the fit of restorations obtained by means of a direct or indirect digital workflow. The values reported on the maximum acceptable gap in scientific literature range from 50 to 200 μm, so there does not seem to be an objective limit based on scientific evidence. According to the most accepted marginal discrepancy in the literature, most of the values of the studies examined are in the 200 μm acceptability range. Within the limitations of this systematic review, computer-aided design and computer-aided manufacturing (CAD/CAM) fabricated restorations obtained by means of an intraoral scanner (IOS) showed better marginal and internal fit than restorations obtained through conventional impression and subsequent laboratory scanning. According to the results of this systematic review, the direct digital workflow resulted as a valid alternative to the indirect digital workflow to produce CAD/CAM all-ceramic restorations.

Chlorhexidine gel used as antiseptic in periodontal pockets

The aim of this study was to evaluate the adjunctive benefit offers by the administration of a chlorhexidine based local drug deliver (Chlo-SITE) into periodontal socket after a full mouth disinfection session. The study design was a randomized, crossover, clinical trial conducted on 60 non-smokers subjects with chronic periodontitis. Each volunteer was subjected to a one-stage full mouth disinfection session and, immediately after that, test product (Chlo-SITE) was inserted in 1 pocket in 2 quadrant. The 1° and 4° quadrant were used for the study with the application of antiseptic (Test); the 2° and 3° as a control. Periodontal probe (PD), bleeding on probing (BOP) and plaque index (PI) was collected at baseline (T0), after 7 days (T1), after 4 weeks (T2). The results of this study suggest that the application of xanthan-based chlorhexidine gel (Xan-CHX) offers a great benefit in improving of the indices in chronic periodontitis.

Noma: a reappraisal in Western countries - are HIV-negative immunocompetent adult patients safe?

Noma is an ancient Greek term referring to a gangrenous disease that destroys soft and hard tissues of oral and perioral structures. This disease has been known since ancient times and persisted in Europe until World War 2, while in the present day it is almost exclusively found in sub-Saharan Africa.

The effectiveness of endodontic sealers and endodontic medicaments on the elimination of enterococcus faecalis: an in vitro study

The aim of this study was to investigate the efficacy of endodontic sealers and endodontic medicaments: Aureoseal (OGNA), MTA (DENTSPLY), calcium hydroxide (CH) (Endoidrox OGNA) and iodoformic paste (OGNA) against Enterococcus faecalis. Thirty-six Biomeraux plates (18 MH and 18 DCO) were inoculated with the experimental suspensions. The E. faecalis broth culture suspensions were prepared and adjusted to no. 0.5-0.7 McFarland standard. In each agar plate, three cavities were created, each measuring 4mm in depth and 7mm in diameter, and then completely filled with the product to be tested. To investigate the root canal sealers' antimicrobial activity, the agar diffusion method is used. The diameters of the zones of microbial inhibition were measured in millimeters around the plate. The results showed that the antimicrobial activity of Aureoseal was superior to those of MTA, iodoformic paste and calcium hydroxide for the microorganisms tested. The study confirmed the resistance of Enterococcus faecalis to endodontic sealers. Aureoseal and Calcium hydroxide showed the best results in inhibition test suggesting to employ them in clinical cases.

Oral Management of Steinert's Disease and Role of Anxiolysis

BACKGROUND

Myotonic dystrophy type I (DM1) is a genetic autosomal dominant disorder; malignant hyperthermia is a possible complication. It may occur following administration of some halogenated general anesthetics, muscle relaxants, or surgical stress.

AIM

The purpose of this case report is to evaluate the dental management of patients with Steinert's disease.

CASE REPORT

The patient needed dental extraction. A locore-gional paraperiosteal anesthesia was performed using bupiva-caine without vasoconstrictor and sedation with nitrous oxide. The syndesmotomy of the elements 3.1, 4.1, and 4.2 was executed. The elements were dislocated through a straight lever and avulsed with an appropriate clamp. The socket was courted, washing with saline solution, inserting a fibrin sponge, and applying sutures (silk 3-0).

CONCLUSION

Dental treatment of the patient with Steinert's dystrophy must be carried out under a hospital environment and the use of local anesthetic without vasoconstrictor and with use of nitrous oxide; anxiolysis is recommended.

CLINICAL SIGNIFICANCE

This case report describes the precautions to perform oral surgery in patients with Steinert's disease and emphasizes the role of anxiolysis to avoid episodes of malignant hyperthermia.

FDPS finish line design and tooth preparation technique

The purpose of this research is to perform and verify the “modified 50° preparation” suggested by the authors. This procedure was performed with a scrupulous standardization of the tooth’s preparation and then of the laboratory techniques to produce a metal-ceramic crown, and the same for the crown cementation technique of on the preparation of the original sample. After the esthetic evaluations, the obtained sample was included in EPON resin and sectioned in the lingual-vestibular sense. The sections were then observed with an optical microscope in different magnifications for the final evaluations. The geometric design proposed presents the advantages of two great preparation techniques: 50° preparation and circumferential shoulder. The 50° bevel designed in first phase of preparation and the second phase of the circumferential 27° shoulder, together allowed to satisfy the following requirements: aesthetic, marginal accuracy, periodontal compliance, conservation and stability. However, this type of prosthetic preparation is not the only one, but it is one of the marginal designs in prosthetic dentistry.

Temporomandibular joint and related structures: anatomical and Histological aspects

In literature, there is no unanimous agreement about the anatomical and functional characteristics of the temporomandibular joint (TMJ) and its components. The aim of this work is to increase the knowledge about components of the temporomandibular joint, starting from the revision of classical anatomy, through macroscopic and microscopic study, 20 samples of human dissected temporomandibular joints.

Radiosurgery-assisted gingival displacement: a proof of concept technique to enhance the efficiency of intraoral digital impression

Nowadays, an increasing number of dentists are using intraoral scanners (IOS) in their daily practice as an alternative to conventional impression taking. One of the main concerns is related to the capability of scanning the subgingival anatomy of the die, usually very challenging due to the limited operative field and the presence of oral fluids. The radiosurgery assisted gingival displacement technique (RAGD) may enhance the intraoral optical scanning of the finish line and neighbor tooth anatomy. The contour of the interim prosthesis is used to drive the tip of radiosurgery electrode along the tooth surface and open selectively the gingival crevice with a prosthetically-driven and minimally invasive approach. The clinical implication of this technique is related to increasing the efficiency and accuracy of the digital impression technique in the critical zone of the prosthetic shoulder.

TMJ’s capsule histological and macroscopical study: relationship between ligamentous laxity and TMI dysfunctions

In this study, the authors examined the capsular structures of 20 human temporomandibular joints (TMJ) macroscopically and microscopically, in order to improve knowledge of these structures, as part of their possible participation in the genesis of TMJ dysfunctions.

Anatomic relationship between temporomandibular joint and middle ear

The present study was designed to identify a relationship between temporomandibular joint and tympanic cavity and potentially justify the possible clinical correlations between these two anatomical entities. For this reason the authors conducted an anatomic-pathological study about the temporomandibular joint (TMJ) and the neighboring anatomical areas of the middle ear by autopsy finds of human adults.

Oral health and implant therapy in Parkinson's patients: review

Parkinson's Disease (PD) is one of the most frequent neurodegenerative diseases, second only to Alzheimer's disease. It is a progressive disease that inevitably leads the patient to death, in most cases for pneumonia ab ingestis. It affects 120 people out of 100,000 and more frequently affects men than women. The main symptoms are divided into motor, non-motor and behavioral ones. The main motors symptoms are tremor, bradykinesia and postural instability. Non-motor symptoms include autonomic nervous dysfunction (orthostatic hypotension, cardiac arrhythmia, sexual dysfunction, excessive sweating due to hypothalamic dysfunction, constipation), insomnia, OSAS, and olfactory dysfunction. Behavioral symptoms are depression, dementia and psychosis. The purpose of this study is to evaluate, through a systematic review of literature, the oral health status of the Parkinson's patient compared with the general population with particular reference to the incidence of caries and periodontal disease, the patient's management during dental interventions and the possibility of rehabilitating the patient with implanted therapy.

Marfan Syndrome: oral implication and management

Marfan's Syndrome is a multisistemic pathology of connective tissues, a dominant autosomal transmission, first discovered by a French pediatrician, Antoine Bernard-Jean Marfan, who first found in some of his patients a disproportionate alteration of inferior infertility. This alteration was caused by the mutation of the FBN1 gene, located on the long arm of the chromosome 15, which encodes for an extracellular matrix protein, fibrin-1. Later it was discovered that the disease could occasionally be due also to the mutation of the TGFBR2 gene, which encodes for a TGF-beta receptor 1. The estimated incidence of the disease is 2-3 subjects affected every 10,000, in the absence of predilection ratial, ethnic, geographic and gender. It is believed that some 15,000 people in Italy suffer from Marfan Syndrome. The disease is characterized by a wide range of clinical manifestations that affect different organs. The study evaluates through a literature review the manifestations in the oral cavity of the marfan syndrome and the correct management of the patient during dental maneuvers.

Low-level laser therapy in the treatment of muscle-skelet pain in patients affected by temporo-mandibular disorders

Background

The purpose of the study is to evaluate the effectiveness of Low-Level Laser Therapy in reducing joint and muscle pain in patients with acute and chronic temporomandibular dysfunction.

Materials and methods

The study was conducted on a sample of 180 patients. The sample was divided into two groups according to the time of onset of the disease: acute TMD (<6 months) and chronic TMD (> 6 months). The treatment for all patients provided for the irradiation with Diode Laser Wiser Doctor Smile with tip plane wave at wavelength of 830 nm, continuous beam to 40nW diameter and radius of 6 mm. The irradiated areas were the joint area, temporal, masseter and pterygoid. The irradiation time for each zone was 60s.The protocol adopted consisted of two weekly treatment for six weeks. Pain assessment was performed using the Visual Analog Scale (VAS), in which different scores (s) depending accused of pain by the patient: s0 no pain, s1-3 mild pain, s4-6 moderate pain, s7-9 severe pain and s10 excessive pain. The pain monitoring was performed before treatment, after 15 days and after one month.

Results

The sample included 80 patients with acute TMD and 100 with chronic TMD. The sample belonging to acute TMD group before treatment, was distributed as follows: 0% in s0; 12,5% in s1-3; 31.3% in s4-6; 53.6% in s7-9 and 2.5% in s10. After 15 days the distribution was was as follows: 6.25% in s0; 47.5% in s1-3; 20% in s4-6; 26.3% in s7-9 and 0% in s10. After 30 days the sample was well distributed: 35% in s0; 45% in 1-3; 10% in s4-6; 10% in s7-9 and 0% in s10. The sample belonging to the chronic TMD group, at time zero, was as follows: 0% at s0; 48% in S1-3; 35% in s4-6; 15% in s7-9 and 2% in s10. After 15 days the distribution was: 29% in s0; 28% in S1-3; 33% in s4-6; 10% in s7-9 and 0% in s10. After 30 days the sample was well distributed: 45% in s0; 36% in S1-3; 15% in s4-6; 4% in s7-9 and 0% in s10.

Conclusions

The Low-Level-Laser-Therapy is a valuable tool that can significantly decrease the perception of pain in patients with temporomandibular joint dysfunction, acute and chronic.

Polysonographical evaluation in a case of moderate osas treated with mandibular advancement device

Background

The Obstructive Sleep Apnea Syndrome (OSAS) is a clinical picture characterized by partial or complete obstruction of the upper airway during sleep, associated with a reduction of oxygen saturation in the blood.The most common symptoms are: apnea sleep, snoring, headache, sleepiness, reduced concentration and memory, irritability, increased blood pressure and dry mouth.

Materials and methods

It was examinated a not-smoker man of 54 years that suffers of roncophaty. He did physical examination, rhinoscopyexam, faringoscopy, rhinofibrolaringoscopy, gnathological evaluation and polysomnographic examination performed with multichannel polygraphy (VitalNight). From the performed examinations, it has been diagnosed a moderate form of obstructive apnea sleep syndrome. He was treated with a mandibular advancement device and it was repeated the polysomnographic exam.

Results

Comparing the results of the polysonographic examination performed before and after the treatment, the patient's clinical picture clearly improved. It has shown a clear reduction of obstructive apneas, hypopneas and snoring.

Conclusions

The use of a mandibular advancement device is certainly a valuable aid in the treatment of moderate type OSAS. The quality of diurnal life is also improved as shown with Sleepness Epworth Scale.

Smart fusion vs. double scan: a comparison between two data-matching protocols for a computer guided implant planning

AIM

To make a comparison between two different approaches of data matching during the preparation of a computer guided implant planning.

MATERIAL AND METHODS

Electronic and manual literature searches were performed to collect information about the double-scan protocol and the smart fusion protocol. The two systems were then tested to identify or confirm their advantages and disadvantages.

RESULTS

The double scan protocol is a reliable and well-known process to obtain a fusion between the anatomical data (CBCT) and the prosthetic data (radiographic template). It is possible to use this protocol both in dentate and edentulous patients. The newly developed smart fusion technique offers the possibility to superimpose the anatomical data (CBCT) onto the prosthetic data (cast + wax-up scan) without the production of a radiographic template. This system is still being tested by the clinicians even though dental manufacturers already consider it as the best solution for the dentate patients selected for a static computer guided implant surgery.

CONCLUSIONS

Smart fusion protocol offers a reasonable time and cost reduction even though its application is limited to dentate patients. A noticeable drawback of the workflow is the matching step: often a manual intervention is necessary to obtain a correct alignment of the CBCT data with the lab scan of the cast. This issue is partially due to the use of non-volume stable materials during the preparation of the cast. Future improvements could be made by combining CBCT data with direct optical scans of patient dental arches in order to create the so-called 'virtual patient'.

Experimental protocol of dental procedures In patients with hereditary angioedema: the role of anxiety and the use of nitrogen oxide

Hereditary angioedema (HAE) is a rare disease, little known to the medical and dental community, but with a growing rate of hospitalization over the years. HAE is due to a deficit/dysfunction of C1 esterase inhibitor which leads to an increase in vascular permeability and the appearance of edemas widespread in all body areas. The airways are the most affected and laryngeal swelling, which can occur, it is dangerous for the patient's life, is also a sensitive spot in our daily practice, therefore, it is also important to be aware of all the signs of this disease. Episodes of HAE have no obvious cause, but it can be triggered by anxiety, invasive procedures and trauma. So this disease is a major problem in oral and maxillofacial surgery, ENT, endoscopy, emergency medicine and anesthesia because even simple procedures can cause laryngeal edema. The recommendations on the management of HAE include long- and short-term prophylaxis and treatment for acute attacks, however, the importance of anxiety control during the operating phases is undervalued. The present work suggests an experimental protocol for the surgery management of HAE patients with the help of nitrous oxide, with a brief review of the literature on this topic.

Statistical analysis of the frequency distribution of signs and symptoms of patients with temporomandibular disorders

The purpose of this text is to evaluate the distribution by sex and age of TMD patients and the frequency of pain on palpation of the lateral pterygoid muscle, pterygoid internal, sternocleidomastoid, masseter, temporal. The purpose is also to assess the existence of direct correlations between the articulating click and lateral deviation, the headache and tenderness of the temporal, the back pain and tenderness of the sternocleidomastoid, the postural disorders and difficulty finding the exact mating closing, the disorders related to previous dental procedures (large conservative reconstructions, rehabilitations fixed dentures and dental extractions) and tenderness to the temporal and masseter. 623 medical records, including 451 males and 175 females were randomly selected. It was statistically calculated the F/M ratio, age distribution and frequency of muscle tenderness to palpation through the relationship of positive feedback on the total sample multiplied by one hundred. The correlation between various disorders was calculated by estimating the Mantel-Haenszel common odds ratio. For each result it has been finally calculated the asymptotic level of significance.

Full digital workflow for implant-prosthetic rehabilitations: a case report

OBJECTIVES

The aim of the present study was to describe a proof of concept digital workflow for the implant-prosthetic treatment in partially edentate patients and evaluate its clinical performance.

METHODS

A 55-year-old woman with a Kennedy class III bilateral edentulism in the mandible has been selected for a computer guided implantology according with the Smart Fusion® protocol (NobelBiocare, Kloten, Switzerland). After the template-guided implant placement, an immediate loading of the implants has been performed. QuickTemp conical temporary abutments were selected to deliver immediately prefabricated cement-retained provisionals. Two months after an impression was taken with an intraoral digital scanner (3Shape Trios3, Copenhagen, Denmark). The provisional restoration optical scanning was used to transfer the functionalized prosthetic contour to be duplicated into the definitive porcelain fused to zirconia restoration cemented on customized titanium abutments.

RESULTS

A satisfying esthetic and functional result has been achieved. No biological and mechanical complications were recorded.

CONCLUSIONS

The investigated fully digital implant-prosthetic protocol provided a smooth, complication free and time effective treatment alternative to the conventional workflow. Besides the fully digital workflow allowed the surgical and prosthetic decision making and the communication within the dental team and with the patient. Further improvements heading to a direct match between the intraoral scan and the CBCT are strongly advised in order to create the so-called virtual patient.

Differences between warfarin and new oral anticoagulants in dental clinical practice

The oral anticoagulant therapy is used for the cure and the prevention of thromboembolic diseases. In the last fifty years the warfarin has been considered the oral anticoagulant of choice. However, its use is limited by a narrow therapeutic index and by a complex pharmacodynamics, which requires regular adjustments and monitoring of the dose. Recently, three new oral anticoagulant - dabigatran etexilato (direct thrombin inhibitor), rivaroxaban and apixaban (Xa factor direct inhibitor) - have been approved for use in europe. Increasing the number of patients taking these drugs, it is important that the dentist knows these new oral anticoagulants, their indications and methods of action, in particular for the management of patients, who require invasive treatments. With regard to the management of the patient threated with the new oral anticoagulants (NAO), there have been new significant changes in the procedure compared to the one followed by patients treated with warfarin. This led to the development of new guidelines that the dentist has to follow in order to ensure a safe and appropriate dental treatment and reduce any postoperative complications. The aim of this work is to evaluate the effectiveness of the new oral anticoagulants compared to warfarin, especially in terms of risks of bleeding events and intra and postoperative complications, in patients requiring multiple dental extractions.

Straight Versus Angulated Abutments on Tilted Implants in Immediate Fixed Rehabilitation of the Edentulous Mandible: A 3-Year Retrospective Comparative Study

PURPOSE

The aim of this study was to evaluate and compare the use of straight versus angulated abutments on tilted implants in the All-on-Four immediate function protocol.

MATERIALS AND METHODS

A total of 85 patients (36 men and 49 women; mean age 56.5 years) with edentulous mandibles were treated according to the All-on-Four concept using computer-guided implant placement. All patients received immediate interim prostheses screwed onto distal tilted implants by means of angulated (control group, n = 42) or straight abutments (test group, n = 43) and were followed for at least 3 years. Outcome considerations comprised implant and prosthetic survival and success rates, marginal bone level changes, patient satisfaction, and required clinical time. Student t test at a significance level of P < .05 was used to correlate the influence of the prosthetic protocol on marginal bone levels around the implants.

RESULTS

Overall implant survival rate was 98.21% for the control group and 98.83% for the test group. None of the 85 fixed prostheses were lost during the observation period (prosthetic survival rate of 100%). Statistically significant differences (P = .0068) in marginal bone loss were found between control and test groups. All patients were functionally and esthetically satisfied with their restorations. Required clinical time averaged 50 minutes for the control group and 30 minutes for the test group.

CONCLUSION

The described simplified and shortened surgical-prosthodontic protocol that avoids use of angulated abutments may be considered a reliable alternative to the traditional All-on-Four protocol.

Influence of the implant drill design and sequence on temperature changes during site preparation

PURPOSE

The purpose of this study was to compare bone temperature changes during implant drilling with two drill designs employed in three different drilling sequences.

MATERIALS AND METHODS

Two implant drill designs and three drilling sequences were evaluated in vitro using artificial bone cylinders. The evaluated drills were different only in the cutting-surface length (control, 16 mm; test, 4 mm). Three drilling sequences (control A, test B1, and test B2) were evaluated with and without irrigation. Temperatures were measured with thermocouple technology. The temperature changes generated by the final drill of each sequence were recorded as the experimental results and were subjected to the Student t test.

RESULTS

There were statistically significant differences in temperature changes when comparing the control group A with the test groups B1 (P = .001) and B2 (P = .01) during drilling without coolant. The mean temperature changes were 12.4°C, 6.5°C, and 13.7°C for groups A, B1, and B2, respectively. The Student t test showed statistically significant differences between temperature changes of the control group A and the test groups B1 (P < .01) and B2 (P < .05) during drilling with coolant. The mean temperature changes were 0.9°C, 0.7°C, and 1.9°C for groups A, B1, and B2, respectively.

CONCLUSION

Reduction in length of the cutting surface of the drill may limit frictional heat. Drills with the same length of cutting surface may induce lower bone temperature changes, when considering a preliminary drilling step with a pilot drill.

Monolithic Lithium Disilicate Full-Contour Crowns Bonded on CAD/CAM Zirconia Complete-Arch Implant Bridges With 3 to 5 Years of Follow-Up

This study was carried on to assess the clinical performance of a novel restorative concept consisting in single monolithic lithium disilicate full-contour crowns bonded on computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia complete-arch implant bridges, to overcome the drawbacks related to the chipping of porcelain fused to zirconia restorations. Sixteen patients received 18 implant-supported hybrid screw-cement-retained complete-arch restorations, consisting of single monolithic lithium disilicate full-contour crowns bonded on CAD/CAM zirconia frameworks. The restorations were supported by 4-8 implants. All patients were followed up for at least 3 years on function (range 36 to 60 months, mean 49.3 months). Clinical controls were scheduled every 4 months. The outcomes were implant and prosthetic survival and success rates, any complications, patient satisfaction, and soft tissue parameters. No dropouts occurred. The overall implant and prosthesis survival rates were 100%. One of 18 restorations (1 of 236 dental units) showed a chip-off fracture of the veneering ceramic that was polished intraorally without any additional treatment, scoring a cumulative prosthetic success rate of 100%, according to the California Dental Association index. All patients were functionally and esthetically highly satisfied with their restorations. Successful soft tissue parameters were found around all implants. Single monolithic lithium disilicate full-contour crowns, bonded on CAD/CAM screw-retained complete-arch zirconia frameworks, showed favorable preliminary outcomes with medium-term follow-up. However, randomized controlled studies of this technique are required for further conclusive recommendations.

Immediate versus delayed positioning of dental implants in guided bone regeneration or onlay graft regenerated areas: a systematic review

The aim of this study was to compare success rates in immediate and delayed dental implant placement following guided bone regeneration or onlay bone block ridge augmentation. A systematic review of all studies on this topic was performed. For inclusion, studies had to involve at least five patients, report specific success criteria, and have a minimum follow-up period of 6 months. Studies reporting only the survival rate of implants were excluded. From 287 studies identified, 79 were screened and 13 were included in the analysis. Six studies provided data on simultaneous (immediate) positioning of implants, five studies on delayed positioning, and two studies provided data on both of these approaches. Success rates for implants placed using a simultaneous approach ranged from 61.5% to 100%; success rates for implants placed using a staged approach ranged from 75% to 98%. Even though the current review revealed that there are not many studies reporting data relevant to the analyzed topic, the data obtained suggest that the delayed positioning of implants should be considered more predictable than the immediate positioning. Studies presenting a control group and adopting standardized success criteria are required, and data from this review must be considered indicative.

Different implant impression techniques for edentulous patients treated with CAD/CAM complete-arch prostheses: a randomised controlled trial reporting data at 3 year post-loading

PURPOSE

To compare two different impression techniques for implants in totally edentulous patients.

MATERIALS AND METHODS

A total of 38 patients had impressions taken both using plaster and splinted vinyl polysiloxane (splinted-VPS). Two casts per patient were generated and allocated as test (plaster) and control (splinted-VPS) cast groups according to a randomised cross-over design. One of the two casts from each patient was randomly selected as master cast according to a parallelgroup design and used to fabricate the definitive prosthesis. Outcome measures were implant and prosthetic success rates, complications, marginal bone level (MBL) changes, patient satisfaction, chair time required to take the impressions, inter-implant discrepancy between the casts, sulcus bleeding index (SBI) and plaque score (PS).

RESULTS

In total, 76 impressions were taken in 38 patients. Two plaster impressions failed. Furthermore, 38 computer-aided design/computer-assisted manufacturing screw-retained complete-arch prostheses were fabricated onto the master cast (18 from plaster and 20 from splinted-VPS impressions) and the patients were followed up for 3 years after loading. No drop-out occurred and no implants or prostheses failed, accounting for a cumulative implant and prosthesis survival rate of 100% over the 3-year post-loading period. Plaster impressions yielded significantly greater patient satisfaction and shorter chair time. The discrepancy between the casts was 0.055 ± 0.067 mm (P = 0.931). Mixed model analysis revealed a significant main effect from both the implant number and the inter-implant distance, while no difference was found with regard to implant angulation. Five chip-off fractures of the porcelain veneer occurred in 5 of the 38 patients (3 in restorations fabricated onto the plaster cast group and 2 in the splinted-VPS cast group) with no effect from the type of impression on the prosthetic success rate (P = 0.331). However, all of the patients were functionally and aesthetically satisfied with their prostheses. Furthermore, mean MBL, SBI and PS showed no significant differences (P > 0.05) between the groups.

CONCLUSIONS

The clinical outcome of plaster impressions for completely edentulous patients was found to be the same as that for splinted-VPS impressions. The intraoral pre-scan resin framework try-in can be avoided. Plaster impressions may be less time consuming and thus more comfortable for the patient, but sometimes may have to be repeated due to fractures.

CONFLICT-OF-INTEREST STATEMENT

All materials used in this study were purchased by the authors and there were no commercial or institutional interests.

Unusual anchor pins placement and protocol deviations during computer-based implant placement in a patient with severe mandibular bone atrophy. A case report

The aim of the study was to describe an unusual method to stabilize the surgical template during the treatment of a severely resorbed edentulous mandible by means of computer-guided implant surgery. Pre-operative computer-based planning revealed the difficulty to stabilize the surgical template in a 67-year-old healthy woman. A deviation of the original NobelGuide™ protocol was performed to ensure the stability of the surgical template: four anchor pins were used to stabilize the surgical template, two in the buccal side of the anterior template and two unusual pins were placed in the lingual site. Four straight TiUnite® Nobel Biocare™ implants were then placed, according to a modified All-on-4™ concept procedure, to avoid graft procedures and to reduce the cumulative chair-side treatment time and costs. A temporary restoration was placed immediately after implant placement. Three months later a definitive, full acrylic restoration was delivered.

Success rate of dental implants inserted in horizontal and vertical guided bone regenerated areas: a systematic review

This study assessed the success rate of implants placed in horizontal and vertical guided bone regenerated areas. A systematic review was carried out of all prospective and retrospective studies, involving at least five consecutively treated patients, that analysed the success rate of implants placed simultaneously or as second surgery following ridge augmentation by means of a guided bone regeneration (GBR) technique. Studies reporting only the survival rate of implants and studies with a post-loading follow up less than 6 months were excluded. From 323 potentially relevant studies, 32 full text publications were screened and 8 were identified as fulfilling the inclusion criteria. The success rate of implants placed in GBR augmented ridges ranged from 61.5% to 100%; all studies, apart from three, reported a success rate higher than 90% (range 90-100%). The data obtained demonstrated that GBR is a predictable technique that allows the placement of implants in atrophic areas. Despite that, studies with well-defined implant success criteria after a longer follow-up are required.

Salivary miRNAome profiling uncovers epithelial and proliferative miRNAs with differential expression across dentition stages

Saliva's ability to mirror the internal physiological environment of an organism coupled with its facile accessibility makes it an attractive diagnostic medium. The finding of microRNAs (miRNAs) in saliva has expanded the field of biomarker discovery since these tiny non-coding RNAs affect various physiological processes and diseases. Few reports have linked miRNAs to tooth development and eruption, with none having studied this in humans. As a first initiative to describe miRNAs in saliva whose modulations may reflect developing and erupting teeth, we quantified the levels of 730 miRNAs in the saliva of children of varying dentition stages: edentulous (newborns), deciduous and permanent by megaplex stemloop reverse-transcription quantitative PCR. The three groups expressed 193, 181 and 192 miRNAs, respectively, where 125 miRNAs had consistent expression. The remaining miRNAs had inter-group variations from 5 to hundreds of fold, where most had either an increasing or decreasing trend in going from edentulous to deciduous to permanent. A literature survey of epithelial miRNAs found most were present in saliva. Moreover, many miRNAs with expression differences between groups had previously documented functions in proliferation, cell cycle, apoptosis and other cellular behaviours key to the dynamics of tooth morphogenesis. Lastly, miRNAs of the same family, such as the let-7 and miR-200 families, or transcribed from the same hairpin, had similar expression patterns. The results presented here should serve as a salivary miRNA dictionary for future studies in tooth development as well as in childhood diseases associated with modulations in saliva composition.

p63 in tooth development

Recent findings have shown that the development of teeth involves a complex sequence of molecular events in which the p53 family member p63 is involved. Indeed, mice lacking p63 do not have teeth and humans bearing mutations in p63 suffer developmental syndromes that affect tooth morphology and number. Several isoforms of p63 have been described: the use of two different promoters produces longer TAp63 isoforms, or shorter, 5' truncated isoforms known as ΔNp63. The 3' end of primary transcripts is then subject to alternative splicing resulting in three additional isoforms: alpha (α), beta (β) and gamma (γ). Tooth development relies mainly on the activity of the N-terminally truncated ΔNp63 isoforms. Here we review the experimental evidence for the involvement of ΔNp63 in tooth development through its ability to sustain the molecular signalling that orchestrates epithelial-mesenchymal interaction.

Rapid virological response as a predictor of sustained response in HCV-infected patients with persistently normal alanine aminotransferase levels: A multicenter study

Rapid virological response (RVR) is now considered the strongest predictor of sustained virological response (SVR) in patients with HCV undergoing antiviral treatment, and thus, shorter antiviral treatment for these patients has been suggested. However, no data exist on the predictive value of RVR in HCV carriers with normal ALT values. A total of 137 patients with persistently normal ALT treated with peginterferon alfa 2a and ribavirin were studied. Fifteen patients dropped out early because of side effects, and in 10 patients with HCV-1 treatment was discontinued because of lack of early virological response (EVR). RVR was observed in 68% of the patients (42% patients with HCV-1, 90% HCV-2 and 64% HCV-3). An end-of-treatment response was observed in 86% of the patients (68% HCV-1, 100% HCV-2 and 91% HCV-3). SVR was maintained in 91 patients (46% HCV-1, 97% HCV-2 and 82% HCV-3). Overall, 92% patients with rapid response did obtain HCV eradication vs only 38% of those without rapid response. HCV-1 patients with baseline HCV RNA <400×10(3) IU/mL were more likely to achieve RVR and SVR than those with higher HCV RNA levels. We conclude that patients with genotype 1 and normal ALT who achieve HCV RNA negativity at week 4 may have a higher probability of eradicating their infection. Because of the concomitant favourable demographic and virological features often found in this particular subset of patients, the duration of therapy in these people might be shortened in the case of RVR. Persistently normal alanine aminotransferase levels patients with genotype 2 or 3 have a high chance of achieving SVR, so retesting of HCV RNA during treatment may have no additional practical value in these subjects.

Comparison of different dose reduction system in computed tomography for orthodontic applications

TO CORRELATE DIFFERENT CT SYSTEM: MSCT (multislice computed tomography) with different acquisition parameters (100KV, 80KV), different reconstruction algorithm (ASIR) and CBCT (cone beam computed tomography) examination in terms of absorbed X-ray dose and diagnostic accuracy.80 KV protocols compared with 100 KV protocols resulted in reduced total radiation dose without relevant loss of diagnostic image information and quality. CBCT protocols compared with 80 KV MSCT protocols resulted in reduced total radiation dose but loss of diagnostic image information and quality although no so relevant.In addition the new system applies to equipment ASIR applicable on MSCT allows 50% of the dose without compromising image quality.

Comparison of fracture resistance of bonded glass fiber posts at different lengths

PURPOSE

To evaluate in vitro the fracture resistance of quartz fiber posts for three different dowel lengths.

METHODS

30 single-rooted human premolars with similar root length and diameter were endodontically treated and randomly divided into three experimental groups (n = 10) according to the post space depth created: (1) 5 mm; (2) 7 mm; (3) 9 mm. Quartz fiber posts (Endo Light post) were cemented using a dual cured resin cement with its adhesive system (Prime & Bond NT + Fluorocore 2). After 24 hours, specimens were embedded in acrylic resin and loaded under continuous compressive force at the extruding coronal part of the post (45-degree angle) to the long tooth axis (crosshead speed: 0.75 mm/minute). Forces at fracture (Newtons) were recorded. One-way ANOVA and Tukey tests were used for the statistical analysis (P < 0.05).

RESULTS

Mean strength values (SD) were: (1) 40.52 (3.14); (2) 41.68 (5.31); (3) 44.88 (6.77), respectively. No statistically significant differences were found among the groups.