Plant-based meats in China: A cross-sectional study of attitudes and behaviours

BACKGROUND

This study investigated potential opportunities or challenges for plant-based meat in the Chinese market. A quantitative framework was applied to ascertain the current level of familiarity and experience with plant-based meat among Chinese consumers, the proportion of consumers that would try or purchase plant-based meat, which demographics within China are most likely to buy plant-based meat, and which attitudes are important in driving plant-based meat purchase intent.

METHODOLOGY

A pre-registered cross-sectional online survey (N=1,206) was distributed to respondents (matched to China's adult population in terms of gender and age).

RESULTS

Respondents reported a variety of dietary identities with a total of 43.4% reporting that they were reducing or avoiding meat. The majority of respondents (60.1%) said they had eaten plant-based meat at least once before. Of those who said they had never eaten plant-based meat, 41.9% intended to try it and 31.4% intended to purchase it. The strongest attitudinal predictor of plant-based meat purchase intent was perceived healthiness (β=0.235, p<0.001), while the strongest demographic predictor of plant-based meat purchase intent was age (β=-0.248, p<0.001).

PRINCIPAL CONCLUSIONS

The findings of this study suggest that an approach based on increasing opportunities for trial, as well as appealing to specific attitudinal and demographic predictors of plant-based purchase intent, could prove successful in increasing adoption of plant-based and alternative meat products. This article is protected by copyright. All rights reserved.

Going veggie: Identifying and overcoming the social and psychological barriers to veganism

We conceptualize the journey to ethical veganism in the stages of the transtheoretical model of change, from precontemplation through contemplation, preparation, action, and maintenance. At each stage, we explore the psychological barriers to progressing towards veganism, discuss how they manifest, and explore ways to overcome them. It is hoped that this paper can be used as a guide for animal advocates to identify the stage an individual is at, and understand and overcome the social and psychological barriers they may face to progressing. We argue that, while many people are ignorant of the cruel practices entailed in animal farming, many deliberately avoid thinking about the issue, are unable to appreciate the scale of the issue, and simply tend to favour the status quo. When engaging with the issue of farm animal suffering, meat-eaters are largely driven by cognitive dissonance, which manifests as motivated reasoning aimed at protecting one's image of oneself and one's society. This is facilitated by confirmation bias and complicit media which cater to the preferred views of their meat-eating audience. Even once convinced of veganism, habit and willpower present further barriers to acting on those beliefs. This is all in the context of a speciesist and carnistic culture where meat consumption is normal, farming is noble, and vegans are 'others'. We locate and elucidate each of these biases within the stages of the transtheoretical model and discuss the implications of this model for animal advocates and for further research.

The farmers' dilemma: Meat, means, and morality

Evidence overwhelmingly supports the view that we need to drastically reduce our consumption of animal products for reasons related to the environment and public health, while moral concerns about the treatment of animals in agriculture are becoming ever more common. As governments increasingly recognize the need to change our food production and alternative protein products become more appealing to consumers, agriculture finds itself in a unique period of transition. How do farmers respond to the changing atmosphere? We present secondary analyses of qualitative and quantitative data to highlight some of the uncertainty and ambivalence about meat production felt throughout the farming community. Survey data from France and Germany reveals that in both countries, those who work in the meat industry have significantly higher rates of meat avoidance than those who do not work in the industry. While non-meat-industry workers are more likely to cite concerns for animals or the environment, meat industry workers more often cite concerns about the healthiness or safety of the products. Concurrently, interviews with people who raise animals for a living suggest that moral concerns among farmers are growing but largely remain hidden; talking about them openly was felt as a form of betrayal. We discuss these findings in the context of the ongoing agricultural transition, observe how tension has manifested as polarization among Dutch farmers, and offer some thoughts about the role of farmers in a new world of alternative proteins.

US and UK Consumer Adoption of Cultivated Meat: A Segmentation Study

Despite growing evidence of the environmental and public health threats posed by today's intensive animal production, consumers in the west remain largely attached to meat. Cultivated meat offers a way to grow meat directly from cells, circumventing these issues as well as the use of animals altogether. The aim of this study was to assess the overall consumer markets and a range of preferences around cultivated meat in the US and the UK relating to nomenclature, genetic modification, health enhancements, and other features. To this end, we recruited large representative samples to participate in an online survey about cultivated meat, and subsequently analyzed segments (a) in the early majority population (guided by the Diffusion of Innovations Model), (b) by generation, and (c) in the general population. Our findings showed a high level of openness (80%) in both the US and UK populations, with 40% somewhat or moderately likely to try and 40% highly likely to try. Younger generations had the greatest openness: 88% of Gen Z, 85% of Millennials, 77% of Gen X, and 72% of Baby Boomers were at least somewhat open to trying cultivated meat. All segments envisioned cultivated meat to be nearly half of their total meat intake. Findings show that consumers prefer the terms 'cultured' and 'cultivated' over 'cell-based' and 'cell-cultured' for use in a social context and on packages, even though they perceive these terms as less descriptive. The most important on-package label was one indicating government assurances, and participants preferred non-GM products over GM products. We also found that US consumers prefer nutritionally superior meat over nutritionally equivalent meat. We discuss implications for product development, messaging, and understanding the likely adoption path of this food innovation.

Culture, meat, and cultured meat

Cultured meat grown in vitro from animal cells has the potential to address many of the ethical, environmental, and public health issues associated with conventional meat production. However, as well as overcoming technical challenges to producing cultured meat, producers and advocates of the technology must consider a range of social issues, including consumer appeal and acceptance, media coverage, religious status, regulation, and potential economic impacts. Whilst much has been written on the prospects for consumer appeal and acceptance of cultured meat, less consideration has been given to the other aspects of the social world that will interact with this new technology. Here, each of these issues is considered in turn, forming a view of cultured meat as a technology with a diverse set of societal considerations and far-reaching social implications. It is argued that the potential gains from a transition to cultured meat are vast, but that cultural phenomena and institutions must be navigated carefully for this nascent industry to meet its potential.

What's in a name? Consumer perceptions of in vitro meat under different names

In vitro meat (IVM) grown from animal cells is approaching commercial viability. This technology could enable consumers to circumvent the ethical and environmental issues associated with meat-eating. However, consumer acceptance of IVM is uncertain, and is partly dependent on how the product is framed. This study investigated the effect of different names for IVM on measures of consumer acceptance. Participants (N = 185) were allocated to one of four conditions in an experimental design in which the product name was manipulated to be 'clean meat', 'cultured meat', 'animal free meat', or 'lab grown meat'. Participants gave word associations and measures of their attitudes and behavioural intentions towards the product. The results indicated that those in the 'clean meat' and 'animal free meat' conditions had significantly more positive attitudes towards IVM than those in the 'lab grown meat' condition, and those in the 'clean meat' condition had significantly more positive behavioural intentions towards IVM compared to those in the 'lab grown meat' condition. Mediation analyses indicated that the valence of associations accounted for a significant amount of the observed differences, suggesting that anchoring can explain these differences. We discuss these results in the context of social representations theory and give recommendations for future research.

Application of Polyacrylamide (PAM) through Lay-Flat Polyethylene Tubing: Effects on Infiltration, Erosion, N and P Transport, and Corn Yield

Polyacrylamides (PAMs), when applied as a soil amendment, purportedly improve soil infiltration, decrease erosion, and reduce offsite agrochemical transport. The effect of PAM on infiltration, erosion, agrochemical transport, and crop yield when applied in furrow to mid-southern US production systems has not been evaluated. The objective of this study was to assess PAM effects on infiltration, erosion, corn ( L.) grain yield, and nitrogen (N) and phosphorus (P) transport when applied at 10 mg L through lay-flat polyethylene tubing. A 2-yr field study was conducted at the Mississippi State Delta Research and Extension Center in Stoneville, MS, on a Dundee silt loam and a Forestdale silty clay loam. The experimental design was a randomized complete block with four replications of each treatment: irrigated plus no PAM (control) and irrigated plus PAM at 10 mg L. Each irrigation event delivered 102 mm of water at 18.9 L m per furrow, and runoff was captured in a holding tank on the lower end of each plot. Pooled over year and soil texture, PAM increased infiltration and corn grain yield by 6% ( ≤ 0.0398). Polyacrylamide effects on the offsite transport of sediment and N and P were inconsistent, varying across year and soil texture. Results indicate that PAM improves infiltration and corn grain yield on silt loam and silty clay loam textured soils; however, further research is required before PAM can be recommended as a best management practice for mitigating erosion and offsite agrochemical transport in mid-southern production systems.

Discovery of cell-active phenyl-imidazole Pin1 inhibitors by structure-guided fragment evolution

Pin1 is an emerging oncology target strongly implicated in Ras and ErbB2-mediated tumourigenesis. Pin1 isomerizes bonds linking phospho-serine/threonine moieties to proline enabling it to play a key role in proline-directed kinase signalling. Here we report a novel series of Pin1 inhibitors based on a phenyl imidazole acid core that contains sub-μM inhibitors. Compounds have been identified that block prostate cancer cell growth under conditions where Pin1 is essential.

Abstract 4432: Discovery of novel Pin1 inhibitors by structure-guided fragment evolution that downregulate cyclin D1 expression in PC-3 prostate cancer cells

Pin1 is a peptidyl-prolyl isomerase (PPIase) that is specialized for catalysing isomerization around pSer/Thr-Pro bonds. As isomerisation around such bonds can promote major conformational changes within proteins, Pin1 is able to influence signaling dynamics and outcomes within pathways regulated by proline-directed kinases such as: MAP kinases, cyclin-dependent kinases and GSK-3β. Pin1 overexpression is only weakly oncogenic in itself, but enhances transformation by ErbB2 or activated Ras alleles. Remarkably however, cells from Pin1 deficient mice are resistant to transformation by Ras and ErbB2. As Pin1-deficient mice have a mild phenotype, there are considerable grounds for hope that Pin1 inhibitors will have value for the therapy of cancer and also inflammatory disorders.

Here we report the discovery of our second series of cell active Pin1 inhibitors. Screening of a 700 member fragment library at high concentrations in a PPIase assay revealed 37 potential novel hits. Only two of these hits could be verified to bind Pin1 by 2D NMR, and we were able to obtain a crystal structure of just one of the novel hits bound to Pin1, a pyridyl pyrazole acid. After examining a number of 6-5 unfused ring system acids, we selected a phenyl-imidazole acid as a start point. A program of structure-guided medicinal chemistry led to the discovery of a series of ligands that occupied a novel combination of surfaces within the Pin1 active site, distinct from that occupied by our previously published amino acid-derived inhibitors. This effort culminated in VER-158197, a sub-micromolar (∼750 nM) inhibitor of Pin1 that exhibits high permeability in a CaCo-2 permeability assays and inhibits the growth of Pin1-dependent PC-3 prostate cancer cells (GI50 ∼ 13 uM). Mode of action studies indicated that VER-158197 downregulated cyclin D1 expression and prevented the phosphorylation of p70 S6 Kinase on Thr389 that is normally observed in repsonse to insulin stimulation.

Note: This abstract was not presented at the AACR 101st Annual Meeting 2010 because the presenter was unable to attend.

Citation Format: {Authors}. {Abstract title} [abstract]. In: Proceedings of the 101st Annual Meeting of the American Association for Cancer Research; 2010 Apr 17-21; Washington, DC. Philadelphia (PA): AACR; Cancer Res 2010;70(8 Suppl):Abstract nr 4432.

Transgenic sickle mice have vascular inflammation

Inflammation may play an essential role in vaso-occlusion in sickle cell disease. Sickle patients have high white counts and elevated levels of serum C-reactive protein (CRP), cytokines, and adhesion molecules. In addition, circulating endothelial cells, leukocytes, and platelets are activated. We examined 4 transgenic mouse models expressing human alpha- and sickle beta-globin genes to determine if they mimic the inflammatory response seen in patients. These mouse models are designated NY-S, Berk-S(Antilles), NY-S/S(Antilles) (NY-S x Berk-S(Antilles)), and Berk-S. The mean white counts were elevated 1.4- to 2.1-fold (P </=.01) in the Berk-S(Antilles), NY-S/S(Antilles), and Berk-S mice, but not in the NY-S mice compared with controls. Serum amyloid P-component (SAP), an acute-phase response protein with 60% to 70% sequence homology to CRP, was elevated 8.5- to 12.1-fold (P </=.001) in transgenic sickle mice. Similarly, serum interleukin-6 (IL-6) was elevated 1.6- to 1.9-fold (P </=.05). Western blots, confirming immunohistochemical staining, showed vascular cell adhesion molecule (VCAM), intercellular adhesion molecule (ICAM), and platelet-endothelial cell adhesion molecule (PECAM) were up-regulated 3- to 5-fold (P </=.05) in the lungs of sickle mice. Ribonuclease protection assays (RPAs) demonstrated VCAM mRNA also was elevated in sickle mice 1.2- to 1.4-fold (P </=.01). Nuclear factor kappaB (NF-kappaB), a transcription factor critical for the inflammatory response, was elevated 1.9-fold (P </=.006) in NY-S sickle mouse lungs. We conclude that transgenic sickle mice are good models to study vascular inflammation and the potential benefit of anti-inflammatory therapies to prevent vaso-occlusion in sickle cell disease.

Rotavirus VP6 expressed by PVX vectors in Nicotiana benthamiana coats PVX rods and also assembles into viruslike particles

The rotavirus major inner capsid protein (VP6) has been expressed in Nicotiana benthamiana plants using vectors based on potato virus X (PVX). VP6 was expressed either as a fusion with the PVX coat protein or from an additional subgenomic promoter inserted to enable both VP6 and PVX coat protein to be expressed independently. Both approaches yielded VP6, which retained the ability to form trimers. VP6 expressed from the subgenomic promoter assembled into paracrystalline sheets and tubes. Expression as a fusion protein yielded PVX rods that presented an external "overcoat" of VP6, but unexpectedly, some rotavirus protein also assembled into icosahedral viruslike particles (VLPs). The assembly of viral protein into VLPs suggests that prior display of VP6 on the flexuous PVX rod facilitates the subsequent assembly of VP6 into stable icosahedral particles.

A comparison of the early postoperative care required by patients treated with single and two stage surgical techniques for the provision of Brånemark implant supported mandibular overdentures

Patients who underwent a single stage surgical procedure to place two Brånemark implants to stabilise complete mandibular overdentures with bar attachments, required no more postoperative follow-up visits before definitive prosthesis construction than patients who had their implants placed at two separate surgical stages. However, the visits of the single stage group, occurred over a shorter time-scale and more attention was required to tighten or replace their healing abutments.

Use of intra-articular morphine for postoperative analgesia following TMJ arthroscopy

Recent studies have suggested that giving opioids locally into inflamed tissue may cause analgesia. This antinociceptive effect has been attributed to the interaction of the drug with opioid receptors upregulated by inflammation in the peripheral tissues. We have compared the analgesic effect of intra-articular morphine with that of normal saline and a combination of morphine and its antagonist naloxone after arthroscopy of the temporomandibular joint (TMJ). Twenty-one patients took part in a randomized controlled double-blind trial and received one of these three solutions at the end of operation. The pain scores, time to the first request for analgesia, and the analgesic consumption of the patients in the three groups did not differ significantly at any time during the study period.

Maxillofacial surgery and the role of the extended day case

AIM

To determine the change in use of a day surgery unit over a 21-year period.

DESIGN

Retrospective analysis.

SETTING

The day surgery unit within a central London dental hospital.

MATERIALS

The operating and anaesthetic records of surgical activity in 1973, 1983, 1993 and 1994.

RESULTS

A six-fold increase in the total number of dentoalveolar procedures performed was demonstrated during the period studied. However, these procedures represented only 77.6% of surgical activity in 1994 compared with 98.9% in 1973.

CONCLUSIONS

Day case surgery appears to be advantageous to patients, clinicians, hospital managers and purchasing authorities. The development of more specialist day case services and facilities within "dental centres' is proposed as a means of ensuring that the specialty is able to adapt to the changing patterns of health care in the future.

Dysmorphophobia: recent developments of interest to the maxillofacial surgeon

Recent changes in the classification of psychiatric illnesses have resulted in the term dysmorphophobia being replaced by that of body dysmorphic disorder (BDD). This paper attempts to alert the clinician to the presenting features of the condition and discusses its management, with particular emphasis on the role of surgery and current concepts of pharmacological treatment. A number of case reports are included to illustrate the diversity of this interesting disorder and the difficulties involved in treatment.

Negotiating advance directives for persons with AIDS

A focus group was conducted to determine the views of persons with AIDS about how to best conduct the process of establishing advance directives. (Advance directives are instructions regarding future medical care to be implemented should a patient be unable to communicate his/her treatment preferences.) Several hypotheses emerged from this focus group that were then formally tested with a questionnaire. The results of the questionnaire identified (a) predictors of attitudes toward advance directives and (b) predictors of the act of having established a directive. Based upon the findings from the focus group and the questionnaire, recommendations for social workers raising the issue of advance directives can be made. First, time for the client to adjust to seropositive notification should be allowed prior to raising the advance directive issue. Second, the advance directive issue should be raised in the context of empowerment rather than being embedded in other paper work. Third, people who are most likely to be disturbed by the process of establishing advance directives are those who have low health locus of control, low trait optimism, low reliance on active involvement as a coping mechanism, and low reliance on distraction as a coping mechanism. More time should be allotted for people with those characteristics.

Control of paint overspray in autobody repair shops

Commercially available controls for reducing worker exposure to paint overspray were evaluated in six autobody shops and a spray-painting equipment manufacturer's test facility. Engineering control measures included spray-painting booths, vehicle preparation stations, and spray-painting guns. The controls were evaluated by measuring particulate overspray concentrations in the worker's breathing zone, visualizing the airflow in spray-painting booths and vehicle preparation stations, and measuring airflow volumes and velocities. In addition, respirator usage observations were collected at five of the autobody repair shops, and quantitative fit tests were conducted on existing respirators at three shops. Several conclusions were drawn from this study. Downdraft spray-painting booths provide lower particulate overspray concentrations measured on the worker than crossdraft and semidowndraft spray-painting booths. In the latter two booths, the spray-painting gun can disperse as much as half the paint overspray into the incoming fresh air, increasing worker overspray exposure. Vehicle preparation stations have no walls to contain the overspray and, commonly, a single exhaust fan removes air from the painting area. Airflow patterns suggest that these do not control the paint overspray. Switching from a conventional spray-painting gun to a high-volume low pressure spray-painting gun reduced the particulate overspray concentration by a factor of 2 at a manufacturer's test facility. However, this change did not significantly affect solvent concentrations. Finally, respirator usage in five of the six shops studied was inappropriate. Respirators were poorly maintained and/or did not fit the workers, perhaps due to the absence of a formal respirator program.

Possible interrelations among environmental toxicants, amphibian development, and decline of amphibian populations

Many amphibian populations are declining in a number of geographical locations throughout the world. In most cases, the cause or causes are unknown, but are assumed to result from man-made alterations in the environment. We review existing evidence concerning how environmental xenobiotics could contribute to declines of amphibian populations by impacting growth and development of the young. This paper examines the potential roles of toxicants in: a) affecting the susceptibility of young to disease; b) retarding growth and development of amphibian young; c) affecting the ability of larvae to avoid predation; d) affecting the development of physiological, morphological, or behavioral processes in a manner that subsequently impairs the ability of the young for future reproduction; and e) directly causing mortality of young. These issues are not well studied, and more studies are needed before the roles of environmental xenobiotics in amphibian declines are fully understood.

The mutagenicity of electrocautery smoke

Careful analysis of electrocautery smoke produced during breast surgery has found organic compounds that are unidentifiable with current analytical techniques. The purpose of this study was to determine the potential mutagenicity of the smoke produced by the electrocautery knife during reduction mammaplasty. Multiple air samples were collected in the operating room during two reduction mammaplasty procedures. Airborne smoke particles were tested for mutagenic potential in both tester strains of Salmonella typhimurium (TA98 and TA100) using the standard Salmonella microsomal test (Ames test). All testing was performed by the Hazard Evaluations and Technical Assistance Branch of the National Institute of Occupational Safety and Health. The smoke produced with the electrocautery knife during reduction mammaplasty was found to be mutagenic to the TA98 strain. The Ames test, an established technique for evaluating the mutagenicity of a substance, was convincingly positive for the smoke collected during the breast surgery. Whether the smoke represents a serious health risk to operating room personnel is not known. Development of techniques to limit electrocautery smoke exposure in the operating room appears to be needed, and surgeons should attempt to minimize their exposure.

Evaluation of a smoke evacuator used for laser surgery

A preliminary study was conducted to determine the effectiveness of a smoke evacuation system used in laser surgery. A 30 W medical CO2 continuous wave (CW) laser was used to make cuts in a pork chop to simulate smoke production during laser surgery. A commercially available smoke evacuation system was used to control the smoke from the simulated surgery. The smoke concentration was measured at 6 in and at 3 and 4 ft from site of laser interaction. The nozzle of the smoke evacuator was located at distances of 2, 6, and 12 in from the surgical site to measure the relative effectiveness of the control. Complete control of smoke was achieved when the nozzle was located at 2 in, but significant amounts of smoke escaped when the nozzle was located at 6 and 12 in. Suggestions for the use of the smoke evacuation system and areas for further study are given.

Polymer-fume fever associated with smoking and use of a mold-release spray containing polytetrafluoroethylene

An ephemeral and debilitating flu-like illness experienced by stamp-makers prompted them to solicit assistance from the National Institute for Occupational Safety and Health. It was determined that a combination of the use of a mold-release spray containing a fluorocarbon polymer (polytetrafluoroethylene), poor general hygiene, and smoking during and after use of the spray was responsible for the workers' symptoms, commonly referred to as "polymer-fume fever." Recommendations made, and which resulted in the abatement of illness included: ventilating the vulcanizing furnace, cessation of smoking in the workplace, or using a mold-release spray that does not contain fluorocarbon.