Angular distribution of polarized photon-pairs in a scattering medium with a Zeeman laser scanning confocal microscope

A novel confocal microscope designed for use with turbid media is proposed. We use a Zeeman laser as the light source. Based on the properties of two-frequency polarized photon-pairs and the common-path feature of polarized photon-pairs with heterodyne detection employed in the proposed confocal microscope, three gatings (spatial filtering gating, polarization gating and spatial coherence gating) are thus simultaneously incorporated in the microscope. Experimental results for the angular distribution of polarized photon-pairs in a scattering medium indicate that polarization gating and spatial coherence gating preclude the detection of multiply scattered photons, whereas the pinhole selects the least scattered photon-pairs. Thus, better performance for axial resolution than can be obtained with a conventional confocal microscope is demonstrated experimentally. In addition, the proposed microscope is able to either look deeper into a turbid medium or work with a denser medium; furthermore, the axial resolution is improved.

Thin-plate spline (TPS) graphical analysis of the mandible on cephalometric radiographs

We describe two cases of Class III malocclusion with and without orthodontic treatment. A thin-plate spline (TPS) analysis of lateral cephalometric radiographs was used to visualize transformations of the mandible. The actual sites of mandibular skeletal change are not detectable with conventional cephalometric analysis. These case analyses indicate that specific patterns of mandibular transformation are associated with Class III malocclusion with or without orthopaedic therapy, and visualization of these deformations is feasible using TPS graphical analysis.

Product ion studies of diastereomeric benzo[ghi]fluoranthene tetraols by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and post-source decay

The product ion formation characteristics of the four diastereomeric tetrahydroxy benzo[ghi]fluoranthene compounds formed by hydrolysis of the syn and anti diastereomers of trans-3,4-dihydroxy-5,5a-epoxy-3,4,5,5a-tetrahydrobenzo[ghi]fluoranthene are studied using matrix-assisted laser desorption/ionization and post-source decay (PSD) to determine a correlation between the fragmentation characteristics of these tetraols and the structures of the diol-epoxide diastereomers from which they are hydrolyzed. The tetraols formed by the trans ring opening of the diol epoxides during hydrolysis yield product ion spectra specific for the syn and anti configurations of their precursor diol epoxides. All four diastereomeric tetraols form product ions by the losses of one and/or two water molecules in varying proportions when lithium-cationized molecule ions (m/z 301) are selected for PSD product ion analysis. The differences in the PSD spectra of these four Li+-cationized molecules are rationalized in terms of a water loss mechanism that involves the 1,2 elimination of a hydrogen atom and hydroxyl group that are cis with respect to each other on adjacent carbons.

Group learning factors in a problem-based course in oral radiology

OBJECTIVES

To assess the development of group dynamics in students who participated in a problem-based learning (PBL) course in oral radiology and to evaluate the influence of the facilitators' experience.

METHODS

At the beginning and end of the course, students in three consecutive years (1997, 1998 and 1999) responded to a group learning factor questionnaire designed to measure group dynamics (engagement, interpersonal relationships, lack of commitment and disruptive behaviour, interpersonal learning and self-presentation). The answers were analysed with paired t-test and the effects of the facilitator's seniority, expertise in oral radiology, experience of PBL and single or rotating facilitators assessed.

RESULTS

Most groups in the three years reported above average group dynamic scores. There were significant changes in group dynamics. In the 1997 class, interpersonal relationships improved (P=0.014). In the 1998 class, interpersonal learning (P=0.021) and engagement (P=0.009) increased significantly, while disruptive behaviour decreased (P=0.031). In the 1999 class, lack of commitment and disruptive behaviour decreased (P=0.014). Groups led by a junior faculty member with no previous experience of PBL show less commitment and more disruptive behaviour.

CONCLUSIONS

More commitment and less disruptive behaviour and improved engagement, interpersonal relationships and self-presentation were found in a PBL course in oral radiology. Facilitators should have prior exposure to PBL to avoid disruptive behaviour among the students.

Effects of Nd:YAG laser irradiation on cultured human gingival fibroblasts

BACKGROUND AND OBJECTIVE

The Nd:YAG laser has been proposed to apply in minor soft tissue surgery, including various periodontal procedures. However, little information is available regarding the direct effect of Nd:YAG laser on gingival fibroblasts, which play an important role in the early healing processes of periodontal repair.

STUDY DESIGN/MATERIALS AND METHODS

Nd:YAG laser irradiation was performed in pulsed mode on human gingival fibroblasts, which was derived from healthy human gingiva by an explant method. The size of laser diode was 400 microm in diameter. The parameters in laser delivery were pulse energy (50-150 mJ), power output (1.0-3.0 W), pulse rate (10-30 pps), and fixed duration of irradiation (10 seconds). The cell cultures were analysed by cytomorphologic examination under phase-contrast and scanning electron microscope. The vitality was also examined with the help of MTT staining.

RESULTS

The area of laser damage on cell culture was circular in shape, with diameter beyond the size of laser diode. By scanning electron microscopy, we observed the cellular damage of cultured gingival fibroblasts induced by Nd:YAG laser irradiation, comparable with the progressive increased power settings. The cytomorphologic changes ranged from disappearance of cellular boundary, loss of identifiable cellular nucleus, and finally cell contraction and vacuolization. Significant decrease in cellular vitality (14% approximately 44%) after laser treatment with irradiation distance of nearly contact was noted. However, 2 mm defocusing irradiation with the same power settings did not significantly decrease cellular vitality.

CONCLUSION

Our study demonstrated the cell damaging effects of Nd:YAG laser, ranging from degeneratively cytomorphologic change to cell death, on the cultured human gingival fibroblasts. It provided the dentist a chance to understand the potential hazard of laser application in periodontal treatment. If the energy output is enough for the clinical purposes, Nd:YAG laser with lower pulse energy and corresponding pulse rate should be selected to minimize the damage on adjacent soft tissue.

Correlation of cervical vertebra maturation with hand-wrist maturation in children

The purpose of this study was to evaluate the reliability of cervical vertebra maturation as an indicator of skeletal age during the circumpubertal period. This was determined by correlating cervical vertebra maturation to hand-wrist maturation. The vertebral skeletal age was assessed using lateral cephalometric radiographs according to maturity indicators modified from Lamparski. The hand-wrist skeletal age was evaluated in radiographs with the system developed by Fishman. The sample consisted of 503 subjects (244 boys and 259 girls), aged 8 through 18 years. The Spearman rank correlation coefficients and Wilcoxon sign rank test showed that a statistically significant relationship existed between the two assessments. Both the intra- and inter-judge tests of reliability displayed no significant differences. The results of this study indicate that skeletal age assessment made from the maturational changes of cervical vertebrae were reliable, reproducible and valid.

Comparison of landmark identification in traditional versus computer-aided digital cephalometry

The aim of this study was to assess landmark identification on digital images in comparison with those obtained from original radiographs. Ten cephalometric radiographs were selected randomly. Seven orthodontic residents identified 19 cephalometric landmarks on both the original radiographs and the digital images. To assess the concordance between landmarks identified on the original radiographs and on their digital counterparts, the x, y coordinates for each landmark in the 2 modalities were transformed with the identical references. The placement differences for 19 landmarks between 2 methods were calculated and their components in horizontal and vertical directions were analyzed respectively. Multivariate analysis of variance showed that the "cephalometric radiograph" and "landmark" variation had greater influence than that from "method" (landmark identification on digital / original radiograph). It was also noted that the differences of landmark identification between original radiographs and their digital counterparts were statistically significant. The landmarks with significant differences of horizontal component on the x-axis were Me, Gn, ANS, PNS, LIA. The differences were generally under 1 mm with the exception of Or, Me, PNS, LIA. The landmarks with significant differences of vertical component on the y-axis were Po, Or, Gn. The inter-observer error for each landmark in digital images was generally larger than that in the original radiographs. However, statistically significant differences of inter-observer errors between 2 modalities were only found for 4 of the 19 landmarks. These 4 landmarks, Po, Ar, ANS, and UM, should be scrutinized more carefully during potential applications of digital cephalometry.

The NLM Indexing Initiative

The objective of NLM's Indexing Initiative (IND) is to investigate methods whereby automated indexing methods partially or completely substitute for current indexing practices. The project will be considered a success if methods can be designed and implemented that result in retrieval performance that is equal to or better than the retrieval performance of systems based principally on humanly assigned index terms. We describe the current state of the project and discuss our plans for the future.

The response of cAMP and DNA synthesis in rat osteosarcoma cells to mechanically deformed culture dishes

The purpose of this research was to document the biochemical response of rat osteosarcoma cells (ROS 17/2.8) to mechanical stress in vitro. The influence of mechanical stress on ROS 17/2.8 cells was studied using a stress application device. Briefly, the device was fabricated by bonding an orthodontic expansion screw outside the bottom of a plastic culture dish with self-curing acrylic resin. Irreversible deformation of the culture dish was produced by activating an expansion screw. The resulting mechanical stress was transferred to the cells which attached to the culture dish. The response in terms of cyclic adenosine monophosphate (cAMP) of ROS 17/2.8 cells to mechanical stress was measured using a competitive protein-binding method. The effect of mechanical stress on cellular growth was assessed through the incorporation of 3H-thymidine after different periods of mechanical stress application. The results revealed that mechanical stress could increase the production of cAMP in ROS 17/2.8 cells at an early phase after stress stimulation. This change in the cAMP level was dependent on the duration of stress application, and the maximal response occurred when the mechanical stress was applied for one hour. Although the cellular incorporation of 3H-thymidine decreased 40-60% in ROS 17/2.8 cells subjected to mechanical stress for 1 hour, this reaction recovered from the inhibition effect to 80-85% of the baseline when the mechanical stress lasted for 24 hours. The observations in this study indicate that mechanical stress stimulates the production of cAMP and inhibits the 3H-thymidine incorporation of ROS 17/2.8 cells at an early phase of stress application.

Beyond synonymy: exploiting the UMLS semantics in mapping vocabularies

The Unified Medical Language System (UMLS) contains semantic information about terms from various sources, each concept can be understood and located by its relationships to other concepts: this is a result of the organizing principle of semantic locality. We describe a method in which the semantic relationships between concepts are used to map concepts from different vocabularies in the UMLS. Applied to mapping concepts to MeSH, this method is able to map 50 to 65% of the non-MeSH concepts to MeSH. A manual review of the mapping shows a relevance rate of 61%. Causes of failure include a lack of consistently represented relationships in the UMLS, and some inconsistencies in the categorization of the concepts. The limits of this method are discussed, as well as possible adaptations for other uses.

Observation of bolus position with standardized test foods and fluoroscopic technique

Sugar and agar balls containing barium were made for the fluoroscopic observation of the bolus position during habitual side chewing in 13 adult males (aged from 20 to 28 years) who had a complete dentition and healthy masticatory system. The test foods had constant size, shape, weight and known hardness, i.e. type 1, 20 kg; type 2, 40 kg; type 3, 1.0 kg and type 4, 0.5 kg. These four types of test foods were chewed randomly in a fluoroscopic room. The jaw separation distance and the bolus position during first bite and crushing bite were observed. The influence of the chewing order of four types of test foods on the bolus position was also recorded. It was found that both hard and soft test foods were most often crushed at the first molar area, and the separation distance during the crushing bite was only slightly wider than the diameter of the food. The first bite jaw separation distance for hard food chewing was significantly wider than soft food chewing and the later in the chewing order the wider the separation distance. The effect of chewing order was not significant on the position and jaw separation distance of the crushing bite.

Exon 8 mutation of p53 gene associated with nodal metastasis in non-small-cell lung cancer

The epidemiologic characteristics of lung cancer in Taiwan differ from those in other parts of the world in low male-to-female ratio, the high percentage of adenocarcinoma, and the relatively high percentage of nonsmokers who are victims. To investigate possible correlation between p53 gene alteration and the unique characteristics of lung cancer here, p53 gene status of 36 patients with primary, resected non-small-cell lung cancer (NSCLC) was studied by directly sequencing the cDNA of the p53 gene, then acquiring clinical and pathologic data to correlate p53 gene status with clinical parameters and pathologic staging. Missense mutations were present in 42% (15 of 36) of patients with NSCLC, including 42% (10 of 24) with adenocarcinomas, and 45% (five of 11) with squamous cell carcinomas. The frequency of p53 mutation was 50% in smokers and 29% in nonsmokers (p = 0.355). The mutation occurred most frequently in exon 8 (56%), and G:C to A:T transitions in non-CpG or CpG sites were the most commonly observed base changes (56%). These findings differ from the high prevalence of G to T transversion found in previous reports. The frequency of metastasis in hilar and mediastinal lymph nodes was significantly higher in tumors with p53 mutations. The association with nodal stage was strong for mutations within exon 8, but it was less apparent for mutations in other exons probably because of the small number. This study suggests that p53 gene missense is common in NSCLC in Taiwan, but smoking is probably not the sole contributing factor. More interestingly, p53 gene mutations, especially those in exon 8, may be associated with regional nodal metastasis.

[Dento-facial structural characteristics in Angle Class II malocclusion associated with abnormal facial divergency]

Lateral cephalometric radiographs of 60 adult patients with Angle class 11 malocclusion associated with abnormal facial divergency were collected from the Orthodontic Department of the National Taiwan University Hospital. They were divided into a hyperdivergent group (35 cases) and a hypodivergent group (25 case), according to mandibular plane angle (SN-MP). The 19 landmarks on each cephalometric tracing were digitized into a computer, then computer-aided cephalometric analysis was performed to calculate the 17 skeletal measurements and 13 dentoalveolar measurements. The dento-facial structural characteristics of the hyperdivergent and hypodivergent groups were compared. It was found that the subjects of the hyperdivergent group revealed a greater tendency of divergency in the anterior cranial base plane, Frank-fort horizontal plane, palatal plane, occlusal plane, and mandibular plane. Hyperdivergent facial type, supposedly indicating an open bite or a tendency toward an open bite, has a longer lower anterior facial height, shorter posterior facial height, longer upper anterior and posterior dental height. While, the majority of dentofacial characteristics of the hypodivergent facial type observed in is study were directly opposite to those of the hyperdivergent facial type. The relationships of incisor overbite depth and other skeletal and dentoalveolar parameters were illustrated by Pearson's correlation coefficient and stepwise multiple regression analysis by means of the SPSS/PC statistic program. With the incisor overbite depth as the dependent variable, the independent variables included on the regression analysis were the 10 items of skeletal and dentoalveolar parameters. The compared parameters showed a statistically significant correlation with the incisor overbite depth (P < 0.001). By the stepwise method, the variables included on the regression equation were (1) N-Go-Gn, (2) A-Gn-Ar, (3) N-Ans/ans-Me, and (4) U1L1. The value of R square (R2) in the regression analysis was 0.543. It demonstrated that only a 54.3% variation in incisor overbite depth can be explained by variations in those skeletal and dentoalveolar variables.

[The vector analysis of the anteroposterior relationship among the apical bases and the incisors]

Using the lateral cephalometric radiographs, the points A, B, maxillary incisor tip (U) and mandibular incisor tip (L) were projected onto the Frankfort horizontal plane and the projected points were defined as a, b, u and 1, respectively. According to the principle of the vector analysis, the vector formula ab - ul = au - bl can always stand irrespective of how the locations of the points a, b, u and 1 vary. The vectors ab, ul, au and bl represent the anteroposterior linear relationship between the upper jaw and the lower jaw, the upper incisor and the lower incisor (overjet), the upper jaw and the upper incisor, and the lower jaw and the lower incisor, respectively with reference to the FH plane. The lateral cephalometric radiographs taken from a total of 863 class I subjects, including 422 males and 441 females, were submitted for the study. The four vector values were obtained from the tracing of each radiograph and the mean values were computed according to sex and age. If a positive value was given to the vector ab, it denoted that point "a" was anterior to point "b", while a negative value denoted that "a" was posterior to "b". Both sexes of the subjects were divided according to their ages into junior primary (JP, 6-8 years), senior primary (SP, 9-11 years), junior high (JH, 12-14 years), and senior high (SH, 15-18 years) groups. No substantial or significant mean difference of each vector between the males and the females in each age group was noted. The mean values of the vector ab were 7.4, 6.8, 6.1 and 4.7 mm in JP, SP, JH and SH groups, respectively with the male and the female data pooled together. This indicates that there was a gradual catching up tendency of mandibular versus maxillary growth. The mean values of the vector ul were 1.4, 2.8, 2.9 and 2.8 mm in each successive age group, respectively showing that the overjet was rather constant with age except in the youngest group. The corresponding mean values were -0.4, -3.9, -5.2 and -6.1 mm for the vector au and -6.3, -8.0, -8.4 and -8.0 mm for the vector bl in JP, SP, JH and SH groups, respectively. The data indicate that both upper and lower incisors were relatively more upright in the youngest group when compared with the other age groups. In the remaining groups the upper incisors exhibited a tendency of gradual labial tipping with age, whereas the lower incisors kept stable in the procumbency.(ABSTRACT TRUNCATED AT 400 WORDS)

The influence of dental occlusion on electromyographic silent periods

Electromyographic silent periods (EMG SP) and occlusal contact intensity were studied in 31 young patients (9-18 years of age) having different types of malocclusion. EMG SP was induced from bilateral temporalis and masseter muscles by chin tapping during isometric contraction. The simple silent period (SSP), depressed activity (DP) and double silent period (2SP or 3SP) were classified according to the character of silence. The occlusal contact intensity was obtained by using a polymer wafer for clenching and was analysed with a photocclusion analyser. It was found that the average amplitude of temporalis and masseter muscles during clenching was about 400 microV. The mean SSP was around 34 msec. The total SP was around 40 msec in temporalis and 44 msec in masseter. All of the subjects demonstrated one or more DP in ten taps while 18 of them had 2SP or 3SP. The difference in contact intensity between right and left had a strong correlation with the EMG SSP+DP, SSP+2SP3SP and total SP. Anterior-posterior difference was not as strongly related to SP parameters. Less significant correlation was found between SSP and occlusal intensity. It is concluded that the influence of occlusion on EMG SP is basically related to the uneven occlusal contact between the two sides rather than the total occlusal contact intensity or the difference in intensity anterior-posteriorly.

Effects of instantaneous prestretching on force degradation characteristics of orthodontic plastic modules

The object of this study was to investigate the effect of instantaneous prestretching on the force degradation behavior of three kinds of four-link plastic modules. A simple sliding apparatus was used to prestretch instantaneously the plastic modules to 100, 200 and 300% of their original length. After prestretching, specimens were tested at 20, 25 and 30 mm stretch distances. Force measurements were performed at the following occasions: before prestretching; at the end of prestretching; after 1, 4 and 24 hours; and after 1, 2 and 3 weeks. The following conclusions can be drawn from this investigation: The control specimens which had not been instantaneously prestretched exhibited considerable force loss over the three-week test period. Most of the force loss occurred rapidly during the first few hours, with a much lower subsequent force degradation rate. Instantaneous prestretching to a greater length resulted in a lower force value remaining at the end of prestretching. Instantaneous prestretching of the plastic modules is an efficient method to dissipate the high initial force level which is clinically undesirable. Prestretching of the modules around or slightly longer than the stretch distance could reduce the high initial force level and still maintain the same force level as the control groups. However, if the length of instantaneous prestretching of the four-link plastic module was much longer than the testing stretch distance which corresponds to the average distance from the first molar to the canine in the same quadrant, the prestretching would reduce both the high initial force value and the force value during the three-week test period, as compared with the control group.

The relationship of dental crowding to tooth size, dental arch width, and arch depth

This study was undertaken to answer the question, "Are there any differences in the mesiodistal tooth diameters, dental arch width and dental arch depth between the crowded and noncrowded dentitions?" The materials submitted for study consisted of the Orthoscan intraoral occlusograms of 89 subjects with well-aligned dentition and those of 74 subjects with gross dental crowding. The tooth size and arch dimensions were measured from these intraoral occlusograms. The data were subjected to statistical treatment for comparison of noncrowded and crowded groups. The findings in this study lead to the following conclusions: The mesiodistal tooth diameters of the crowded group were significantly larger than those of the noncrowded group. The dental arch widths of the crowded group were significantly smaller than those of the noncrowded group. No substantial or significant difference in dental arch depth between the crowded and noncrowded subjects could be noted. From these findings it seems that tooth size and dental arch width are determining factors in the formation of dental crowding. Clinically, these results suggest that in the treatment of dental crowding, extraction of teeth and/or expansion of dental arches should be considered depending on what is the main causative factor.

Acute and chronic effects of haloperidol on plasma and brain homovanillic acid in the rat

The effects of acute and chronic administration of haloperidol on homovanillic acid (HVA) in plasma and the brain were examined in the rat. Acute haloperidol treatment (1 mg/kg) resulted in highly significant elevations in HVA within 30 min and produced a maximal increase of HVA in 3-6 hr in both plasma and the whole brain. The response of brain HVA to increasing doses (0.05-30 mg/kg) of haloperidol showed an inverted U pattern. Plasma HVA showed a very flat response to lower doses (less than or equal to 5 mg/kg) of haloperidol and a dramatically elevated one to higher doses (greater than or equal to 10 mg/kg). Haloperidol produced a parallel increase in plasma and brain HVA at lower doses (less than or equal to 2 mg/kg) only. After chronic administration of haloperidol for up to 28 days, the response of HVA in plasma correlated mainly with, but tolerated later than, those in the whole brain and the olfactory tubercle.

The effects of lead ion on immune function of rabbit alveolar macrophages: quantitation of immune phagocytosis and rosette formation by 51Cr in vitro

Experiments by a 51Cr-labeling technique were performed to investigate the effects of lead (Pb2+) on immune phagocytosis and Fc-rosette formation of rabbit pulmonary alveolar macrophages (PAMs). Evidence is presented that Pb2+ at concentrations of 10(-3) and 10(-4)M could inhibit these functions of PAMs. The degree of inhibition corresponded to the concentration of this heavy metal ion in vitro.