Ultrasmall Gold Nanoparticles Radiolabeled with Iodine-125 as Potential New Radiopharmaceutical

The relatively high linear energy transfer of Auger electrons, which can cause clustered DNA damage and hence efficient cell death, makes Auger emitters excellent candidates for attacking metastasized tumors. Moreover, gammas or positrons are usually emitted along with the Auger electrons, providing the possibility of theragnostic applications. Despite the promising properties of Auger electrons, only a few radiopharmaceuticals employing Auger emitters have been developed so far. This is most likely explained by the short ranges of these electrons, requiring the delivery of the Auger emitters to crucial cell parts such as the cell nucleus. In this work, we combined the Auger emitter 125I and ultrasmall gold nanoparticles to prepare a novel radiopharmaceutical. The 125I labeled gold nanoparticles were shown to accumulate at the cell nucleus, leading to a high tumor-killing efficiency in both 2D and 3D tumor cell models. The results from this work indicate that ultrasmall nanoparticles, which passively accumulate at the cell nucleus, have the potential to be applied in targeted radionuclide therapy. Even better tumor-killing efficiency can be expected if tumor-targeting moieties are conjugated to the nanoparticles.

The application of atomic layer deposition in the production of sorbents for 99Mo/99mTc generator

New production routes for ⁹⁹Mo are steadily gaining importance. However, the obtained specific activity is much lower than currently produced by the fission of U-235. To be able to supply hospitals with ⁹⁹Mo/^99mTc generators with the desired activity, the adsorption capacity of the column material should be increased. In this paper we have investigated whether the gas phase coating technique Atomic Layer Deposition (ALD), which can deposit ultra-thin layers on high surface area materials, can be used to attain materials with high adsorption capacity for ⁹⁹Mo. For this purpose, ALD was applied on a silica-core sorbent material to coat it with a thin layer of alumina. This sorbent material shows to have a maximum adsorption capacity of 120 mg/g and has a^99mTc elution efficiency of 55 ± 2% based on 3 executive elutions.

Radionuclide generator-based production of therapeutic 177Lu from its long-lived isomer 177mLu

Background

In this work, a lutetium-177 (¹⁷⁷Lu) production method based on the separation of nuclear isomers, ^177mLu & ¹⁷⁷Lu, is reported. The ^177mLu-¹⁷⁷Lu separation is performed by combining the use of DOTA & DOTA-labelled peptide (DOTATATE) and liquid-liquid extraction.

Methods

The ^177mLu cations were complexed with DOTA & DOTATATE and kept at 77 K for periods of time to allow ¹⁷⁷Lu production. The freed ¹⁷⁷Lu ions produced via internal conversion of ^177mLu were then extracted in dihexyl ether using 0.01 M di-(2-ethylhexyl) phosphoric acid (DEHPA) at room temperature. The liquid-liquid extractions were performed periodically for a period up to 35 days.

Results

A maximum ¹⁷⁷Lu/^177mLu activity ratio of 3500 ± 500 was achieved with [^177mLu]Lu-DOTA complex, in comparison to ¹⁷⁷Lu/^177mLu activity ratios of 1086 ± 40 realized using [^177mLu]Lu-DOTATATE complex. The ¹⁷⁷Lu-^177mLu separation was found to be affected by the molar ratio of lutetium and DOTA. A ¹⁷⁷Lu/^177mLu activity ratio up to 3500 ± 500 was achieved with excess DOTA in comparison to ¹⁷⁷Lu/^177mLu activity ratio 1500 ± 600 obtained when lutetium and DOTA were present in molar ratio of 1:1. Further, the ¹⁷⁷Lu ion extraction efficiency, decreases from 95 ± 4% to 58 ± 2% in the presence of excess DOTA.

Conclusion

The reported method resulted in a ¹⁷⁷Lu/ ^177mLu activity ratio up to 3500 after the separation. This ratio is close to the lower end of ¹⁷⁷Lu/^177mLu activity ratios, attained currently during the direct route ¹⁷⁷Lu production for clinical applications (i.e. 4000–10,000). This study forms the basis for further extending the liquid-liquid extraction based ^177mLu-¹⁷⁷Lu separation in order to lead to a commercial ^177mLu/¹⁷⁷Lu radionuclide generator.

Electronic supplementary material

The online version of this article (10.1186/s41181-019-0064-5) contains supplementary material, which is available to authorized users.

Alpha particle spectroscopy using FNTD and SIM super-resolution microscopy

Structured illumination microscopy (SIM) for the imaging of alpha particle tracks in fluorescent nuclear track detectors (FNTD) was evaluated and compared to confocal laser scanning microscopy (CLSM). FNTDs were irradiated with an external alpha source and imaged using both methodologies. SIM imaging resulted in improved resolution, without increase in scan time. Alpha particle energy estimation based on the track length, direction and intensity produced results in good agreement with the expected alpha particle energy distribution. A pronounced difference was seen in the spatial scattering of alpha particles in the detectors, where SIM showed an almost 50% reduction compared to CLSM. The improved resolution of SIM allows for more detailed studies of the tracks induced by ionising particles. The combination of SIM and FNTDs for alpha radiation paves the way for affordable and fast alpha spectroscopy and dosimetry.

Improved 225Ac daughter retention in InPO4 containing polymersomes

Alpha-emitting radionuclides like actinium-225 (²²⁵Ac) are ideal candidates for the treatment of small metastasised tumours, where the long half-life of ²²⁵Ac enables it to also reach less accessible tumours. The main challenge lies in retaining the recoiled alpha-emitting daughter nuclides, which are decoupled from targeting agents upon emission of an alpha particle and can subsequently cause unwanted toxicity to healthy tissue. Polymersomes, vesicles composed of amphiphilic block copolymers, are capable of transporting (radio)pharmaceuticals to tumours, and are ideal candidates for the retention of these daughter nuclides. In this study, the Geant4 Monte Carlo simulation package was used to simulate ideal vesicle designs. Vesicles containing an InPO₄ nanoparticle in the core were found to have the highest recoil retention, and were subsequently synthesized in the lab. The recoil retention of two of the daughter nuclides, namely francium-221 (²²¹Fr) and bismuth-213 (²¹³Bi) was determined at different vesicle sizes. Recoil retention was found to have improved significantly, from 37 ± 4% and 22 ± 1% to 57 ± 5% and 40 ± 2% for ²²¹Fr and ²¹³Bi respectively for 100nm polymersomes, as compared to earlier published results by Wang et al. where ²²⁵Ac was encapsulated using a hydrophilic chelate (Wang et al. 2014). To better understand the different parameters influencing daughter retention, simulation data was expanded to include vesicle polydispersity and nanoparticle position within the polymersome. The high retention of the recoiling daughters and the ²²⁵Ac itself makes this vesicle design very suitable for future in vivo verification.

Separation of nuclear isomers for cancer therapeutic radionuclides based on nuclear decay after-effects

¹⁷⁷Lu has sprung as a promising radionuclide for targeted therapy. The low soft tissue penetration of its β^- emission results in very efficient energy deposition in small-size tumours. Because of this, ¹⁷⁷Lu is used in the treatment of neuroendocrine tumours and is also clinically approved for prostate cancer therapy. In this work, we report a separation method that achieves the challenging separation of the physically and chemically identical nuclear isomers, ^177mLu and ¹⁷⁷Lu. The separation method combines the nuclear after-effects of the nuclear decay, the use of a very stable chemical complex and a chromatographic separation. Based on this separation concept, a new type of radionuclide generator has been devised, in which the parent and the daughter radionuclides are the same elements. The ^177mLu/¹⁷⁷Lu radionuclide generator provides a new production route for the therapeutic radionuclide ¹⁷⁷Lu and can bring significant growth in the research and development of ¹⁷⁷Lu based pharmaceuticals.

Pharmacokinetics of Polymersomes Composed of Poly(Butadiene-Ethylene Oxide); Healthy versus Tumor-Bearing Mice

Vesicles composed of block copolymers (i.e., polymersomes) are one of the most versatile nano-carriers for medical purposes due to their tuneable physicochemical properties and the possibility to encapsulate simultaneously hydrophobic and hydrophilic substances, allowing, for instance, the combination of therapy and imaging. In cancer treatment, these vesicles need to remain long enough in the blood stream to be sufficiently taken up by tumors. Here, we have investigated the biodistribution and the pharmacokinetics of polymersomes, composed of poly(butadiene-b-ethylene oxide) having dimensions around 80 nm. The polymersomes have been radiolabeled with ¹¹¹In via the so-called active loading method achieving a loading efficiency of 92.9 ± 0.9% with radionuclide retention in mouse serum of more than 95% at 24 h. The optimized ¹¹¹In containing polymersomes have been intravenously administered in healthy and tumor bearing mice for pharmacokinetic determination using microSPECT (Single Photon Emission Computed Tomography). In healthy mice these polymersomes have been found to exhibit relatively long blood circulation (> 6 h), low liver uptake (6 ± 1.5%ID/g, 48 h p.i.) and elevated spleen uptake (188 ± 30%ID/g). The blood circulation in tumor bearing mice is dramatically reduced (< 1.5 h) most likely due to elevated splenic filtration, clearly indicating the importance of in vivo studies in diseased mice. Finally, the polymersomes have been injected subcutaneously in tumor bearing mice revealing retention of 77% in the mice, primarily accumulated at the site of injection, up to 48 hours after administration.

Source apportionment of indoor PM10 in Elderly Care Centre

Source contribution to atmospheric particulate matter (PM) has been exhaustively modelled. However, people spend most of their time indoors where this approach is less explored. This evidence worsens considering elders living in Elderly Care Centres, since they are more susceptible. The present study aims to investigate the PM composition and sources influencing elderly exposure. Two 2-week sampling campaigns were conducted-one during early fall (warm phase) and another throughout the winter (cold phase). PM10 were collected with two TCR-Tecora(®) samplers that were located in an Elderly Care Centre living room and in the correspondent outdoor. Chemical analysis of the particles was performed by neutron activation analysis for element characterization, by ion chromatography for the determination of water soluble ions and by a thermal optical technique for the measurement of organic and elemental carbon. Statistical analysis showed that there were no statistical differences between seasons and environments. The sum of the indoor PM10 components measured in this work explained 57 and 53 % of the total PM10 mass measured by gravimetry in warm and cold campaigns, respectively. Outdoor PM10 concentrations were significantly higher during the day than night (p value < 0.05), as well as Ca(2+), Fe, Sb and Zn. The contribution of indoor and outdoor sources was assessed by principal component analysis and showed the importance of the highways and the airport located less than 500 m from the Elderly Care Centre for both indoor and outdoor air quality.

Estimating the inhaled dose of pollutants during indoor physical activity

BACKGROUND

It is undeniable that many benefits come from physical activity. People exercise in fitness centers to improve their health and well-being, prevent disease and to increase physical attractiveness. However, these facilities join conditions that cause poor indoor air quality. Moreover, increased inhalation rates during exercise have influence on inhaled doses of air pollution.

OBJECTIVES

This study aims to calculate the inhaled dose of air pollutants during exercise, by estimating minute ventilation of participants and measuring air pollutant concentrations in fitness centers.

METHODS

Firstly, the 20 participants performed an incremental test on a treadmill, where heart rate and minute ventilation were measured simultaneously to develop individual exponential regression equations. Secondly, heart rate was measured during fitness classes and minute ventilation was estimated based on the calculated regression coefficients. Finally, the inhaled dose of air pollutants was calculated using the estimated minute ventilation and the concentrations of the pollutants measured in a monitoring program performed in 63 fitness classes.

RESULTS

Estimated inhaled doses were higher in aerobic classes than in holistic classes. The main difference was registered for PM10 inhaled dose that presented an average ratio between aerobic and holistic classes greater than four. Minute ventilation and PM10 concentrations in aerobic classes were, on average, 2.0 times higher than in holistic classes. Results showed that inhalation of pollutants is increased during heavy exercise, demonstrating the need to maintain high indoor air quality in fitness centers.

CONCLUSIONS

This study illustrates the importance of inclusion minute ventilation data when comparing inhaled doses of air pollution between different population groups. This work has estimated for the first time the minute ventilation for different fitness classes. Also constitutes an important contribution for the assessment of inhaled dose in future studies to be performed in fitness centers.

Phosphate and arsenate removal efficiency by thermostable ferritin enzyme from Pyrococcus furiosus using radioisotopes

Oxo-anion binding properties of the thermostable enzyme ferritin from Pyrococcus furiosus were characterized with radiography. Radioisotopes (32)P and (76)As present as oxoanions were used to measure the extent and the rate of their absorption by the ferritin. Thermostable ferritin proved to be an excellent system for rapid phosphate and arsenate removal from aqueous solutions down to residual concentrations at the picomolar level. These very low concentrations make thermostable ferritin a potential tool to considerably mitigate industrial biofouling by phosphate limitation or to remove arsenate from drinking water.

The suitability of EBC-Pb as a new biomarker to assess occupational exposure to lead

Occupational exposure to lead (Pb) requires continuous surveillance to assure, as much as possible, safe and healthful working conditions. This study addresses the suitability of assessing Pb exposure in relevant workers using their exhaled breath condensate (EBC). This study enrolled workers of two different Pb processing industries characterized by moderate and high Pb exposure levels in the work environment, and a group of non-exposed individuals working in offices who served as baseline for Pb exposure. The EBC-Pb of workers reflected the Pb levels in the work environment of all three settings, although the relationship with B-Pb was not clear. The lack of correlation between EBC-Pb and B-Pb most probably indicates the time lag for Pb to enter in the two body pools. The EBC-Pb seems to reflect immediate exposure, providing a prompt signature of Pb in the environmental that may interact directly with the organ. By delivering short-term evaluation of exposure, EBC-Pb represents a clear advantage in biomonitoring and may become an interesting tool for estimating organ burden.

Fungal contamination assessment in Portuguese elderly care centers

Individuals spend 80-90% of their day indoors and elderly subjects are likely to spend even a greater amount of time indoors. Thus, indoor air pollutants such as bioaerosols may exert a significant impact on this age group. The aim of this study was to characterize fungal contamination within Portuguese elderly care centers. Fungi were measured using conventional as well as molecular methods in bedrooms, living rooms, canteens, storage areas, and outdoors. Bioaerosols were evaluated before and after the microenvironments' occupancy in order to understand the role played by occupancy in fungal contamination. Fungal load results varied from 32 colony-forming units CFU m(-3) in bedrooms to 228 CFU m(-3) in storage areas. Penicillium sp. was the most frequently isolated (38.1%), followed by Aspergillus sp. (16.3%) and Chrysonilia sp. (4.2%). With respect to Aspergillus genus, three different fungal species in indoor air were detected, with A. candidus (62.5%) the most prevalent. On surfaces, 40 different fungal species were isolated and the most frequent was Penicillium sp. (22.2%), followed by Aspergillus sp. (17.3%). Real-time polymerase chain reaction did not detect the presence of A. fumigatus complex. Species from Penicillium and Aspergillus genera were the most abundant in air and surfaces. The species A. fumigatus was present in 12.5% of all indoor microenvironments assessed. The living room was the indoor microenvironment with lowest fungal concentration and the storage area was highest.

Indoor and outdoor biomonitoring using lichens at urban and rural primary schools

Monitoring particulate matter (PM) and its chemical constituents in classrooms is a subject of special concern within the scientific community in order to control and minimize child exposure. Regulatory sampling methods have presented several limitations in their application to larger number of classrooms due to operational and financial constraints. Consequently, passive sampling methodologies using filters were developed for indoor sampling. However, such methodologies could not provide parallel information for outdoors, which is important to identify pollution sources and assess outdoor contribution to the indoors. Therefore, biomonitoring with transplanted lichens, a technique usually applied for outdoor studies, was used both indoor and outdoor of classrooms. Three main objectives were proposed, to (i) characterize simultaneously indoor and outdoor of classrooms regarding inorganic air pollutants, (ii) investigate spatial patterns of lichen conductivity, and (iii) assess pollution sources that contribute to a poor indoor air quality in schools. Lichens Flavoparmelia caperata were transplanted to indoor and outdoor of classrooms for 59 d. After exposure, electric conductivity of lichens leachate was measured to evaluate lichen vitality and cell damage. Outdoors lichen conductivity was higher near the main highways, and indoors there was great variability in levels, which indicates different emissions sources and different ventilation patterns. Chemical content of lichens was assessed by instrumental neutron activation analysis (INAA), and As, Br, Ca, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Na, Rb, Sb, Sc, Sm, Sr, Ta, Th, Yb, and Zn were determined. Element accumulation, crustal enrichment factors, and spatial variability of elements were analyzed and contaminants from anthropogenic sources, such as traffic (As, Sb, and Zn) and indoor chalk (Ca) found. Classrooms with potential indoor air quality problems were identified by presenting higher accumulations of inorganic pollutants in exposed biomonitors.

Levels and spatial distribution of airborne chemical elements in a heavy industrial area located in the north of Spain

The adverse health effects of airborne particles have been subjected to intense investigation in recent years; however, more studies on the chemical characterization of particles from pollution emissions are needed to (1) identify emission sources, (2) better understand the relative toxicity of particles, and (3) pinpoint more targeted emission control strategies and regulations. The main objective of this study was to assess the levels and spatial distribution of airborne chemical elements in a heavy industrial area located in the north of Spain. Instrumental and biomonitoring techniques were integrated and analytical methods for k0 instrumental neutron activation analysis and particle-induced x-ray emission were used to determine element content in aerosol filters and lichens. Results indicated that in general local industry contributed to the emissions of As, Sb, Cu, V, and Ni, which are associated with combustion processes. In addition, the steelwork emitted significant quantities of Fe and Mn and the cement factory was associated with Ca emissions. The spatial distribution of Zn and Al also indicated an important contribution of two industries located outside the studied area.

Determination of airborne nanoparticles in elderly care centers

According to numerous studies, airborne nanoparticles have a potential to produce serious adverse human health effects when deposited into the respiratory tract. The most important parts of the lung are the alveolar regions with their enormous surface areas and potential to transfer nanoparticles into the blood stream. These effects may be potentiated in case of the elderly, since this population is more susceptible to air pollutants in general and more to nanoparticles than larger particles. The main goal of this investigation was to determine the exposure of institutionalized elders to nanoparticles using Nanoparticle Surface Area Monitor (NSAM) equipment to calculate the deposited surface area (DSA) of nanoparticles into elderly lungs. In total, 193 institutionalized individuals over 65 yr of age were examined in four elderly care centers (ECC). The occupancy daily pattern was achieved by applying a questionnaire, and it was concluded that these subjects spent most of their time indoors, including the bedroom and living room, the indoor microenvironments with higher prevalence of elderly occupancy. The deposited surface area ranged from 10 to 46 μm(2)/cm(3). The living rooms presented significantly higher levels compared with bedrooms. Comparing PM10 concentrations with nanoparticles deposited surface area in elderly lungs, it is conceivable that living rooms presented the highest concentration of PM10 and were similar to the highest average DSA. The temporal distribution of DSA was also assessed. While data showed a quantitative fluctuation in values in bedrooms, high peaks were detected in living rooms.

Effect of particulate matter, atmospheric gases, temperature, and humidity on respiratory and circulatory diseases' trends in Lisbon, Portugal

This study addresses the significant effects of both well-known contaminants (particles, gases) and less-studied variables (temperature, humidity) on serious, if relatively common, respiratory and circulatory diseases. The area of study is Lisbon, Portugal, and time series of health outcome (daily admissions in 12 hospitals) and environmental data (daily averages of air temperature, relative humidity, PM(10), SO(2), NO, NO(2), CO, and O(3)) have been gathered for 1999-2004 to ascertain (1) whether concentrations of air pollutants and levels of temperature and humidity do interfere on human health, as gauged by hospital admissions due to respiratory and circulatory ailments; and (2) whether there is an effect of population age in such admissions. In general terms, statistically significant (p < 0.001) correlations were found between hospital admissions and temperature, humidity, PM(10), and all gaseous pollutants except CO and NO. Age appears to influence respiratory conditions in association with temperature, whereas, for circulatory conditions, such an influence likely involves temperature as well as the gaseous pollutants NO(2) and SO(2).

Kinetics and thermodynamics of adsorption on hydroxyapatite of the [160Tb]terbium complexes of the bone-targeting ligands DOTP and BPPED

The temperature-dependent adsorption on hydroxyapatite (HAP) of the Tb complexes of two macrocyclic DOTA-like ligands containing HAP-binding phosphonate groups was studied by a radiotracer method using 160Tb as the label. One ligand (DOTP) contains four separate phosphonate groups, while the second ligand (BPPED) contains a single bisphosphonate group coupled via a phosphinate spacer group. The equilibrium isotherms were fitted by models according to Langmuir, Freundlich, Langmuir-Freundlich, Toth, and Dubinin-Radushkevich, with the Langmuir-Freundlich and the Toth models resulting in the best fits. These models take into account the energetic surface heterogeneity of HAP for the binding of the complexes, which was confirmed by the dependence of the reversibility of the adsorption on the complex concentration. The affinity of the Tb-BPPED complex toward the HAP surface was substantially higher than that of the Tb-DOTP complex. Thermodynamic parameters obtained from the temperature-dependence of the adsorption and the Van't Hoff relation showed that the adsorption of both complex types is endothermic and entropy-driven, due to dehydration of the complex and the HAP surface during adsorption. The kinetics of the adsorption were very fast, and of the tested models (pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich) only the Elovich model described the experimental data suitably. The activation energy of the adsorption was calculated by application of an Arrhenius-type relation, showing chemisorption for both complex types. Adsorption rates were reduced when HAP with larger particle size was used.

On the beneficial role of silicon to organisms: a case study on the importance of silicon chemistry to metal accumulation in yeast

Silicon is involved in numerous important structural and functional roles in a wide range of organisms, including diatoms, plants, and humans, but clear mechanisms have been discovered only in diatoms and sponges. Silicate availability influences metal concentrations within various cell- and tissue-types, but a mechanism has not been discovered so far. In an earlier study on Baker's yeast Saccharomyces cerevisiae it was proposed that a chemical mechanism, rather than a biological one, is important. In the present study, the interaction of silicon with Baker's yeast is further investigated by studying the influence of zinc and magnesium on Si accumulation both at a low and a high silicate concentration in the medium. Si accumulation fitted well with Freundlich adsorption and Si release followed depolymerization kinetics, indicating that silicate adsorbs to the surface of the cell rather than being transported over the cell membrane. Subsequently, adsorbed silicate interacts with metal ions and, therefore, alters the cell's affinity for these ions. Since several metals are nutritional, these Si interactions can significantly change the growth and viability of organisms. In conclusion, the results show that chemistry is important in Si and metal accumulation in Baker's yeast, and suggest that similar mechanisms should be studied in detail in other organisms to unravel essential roles of Si.

Complexes of DOTA-bisphosphonate conjugates: probes for determination of adsorption capacity and affinity constants of hydroxyapatite

The adsorption on hydroxyapatite of three conjugates of a bisphosphonate and a macrocycle having C1, C2, and C3 spacers and their terbium complexes was studied by the radiotracer method using 160Tb as the label. The radiotracer-containing complex of the conjugate with the C3 spacer was used as a probe for the determination of the adsorption parameters of other bisphosphonates that lack a DOTA unit. A physicochemical model describing the competitive adsorption was successfully applied in the fitting of the obtained data. The maximum adsorption capacity of bisphosphonates containing bulky substituents is determined mainly by their size. For bisphosphonates having no DOTA moiety, the maximum adsorption capacity is determined by the electrostatic repulsion between negatively charged bisphosphonate groups. Compounds with a hydroxy or amino group attached to the alpha-carbon atom show higher affinities. Macrocyclic compounds containing a short spacer between the different bisphosphonic acid groups and the macrocyclic unit exhibit high affinities, indicating a synergic effect of the bisphosphonic and the macrocyclic groups during adsorption. The competition method described uses a well-characterized complex and allows a simple evaluation of the adsorption behavior of bisphosphonates. The application of the macrocycle-bisphosphonate conjugates allows easy radiolabeling via complexation of a suitable metal isotope.

Phenylboronate 160Tb complexes for molecular recognition of glycoproteins expressed on tumor cells

The over-expression of sialic acid on the surface of cancer cells compared with normal ones makes this nine-carbon sugar an attractive biomarker for molecular diagnosis and therapy. Here, we describe a study on the molecular recognition of sialic acid end groups on the surface of human glioma cells by (160)Tb-DTPA-EN(2), (160)Tb-DTPA-(ENPBA)(2) and (160)Tb-DTPA-(PBA)(2) complexes. The results show Tb-DTPA-(ENPBA)(2) to be the most efficient targeting agent, due to the electrostatic interaction between its two positively charged ammonium groups and the negatively charged cell surface, which provides an additional stabilization of the covalent binding through the PBA moieties and the sialic acid diol functions. Up to 5.5 nmol Tb/mg protein is taken up by the cells. ICP analysis after incubation experiments with non-radioactive Tb-DTPA-(ENPBA)(2) suggests that dissociation of Tb from this complex occurs after its binding to the cell surface. Most likely, most of the free Tb remains adsorbed on the surface of the cells, although internalization of a small amount cannot be excluded.

Optimization, application, and interpretation of lactate dehydrogenase measurements in microwell determination of cell number and toxicity

The lactate dehydrogenase (LDH) assay was addressed for its sensitivity, disturbances by foaming, and cell number and size. Cells were from a U-251 MG grade IV human glioblastoma brain tumor cell line used in 100-microl well volumes. Cells were counted by microscopy and Coulter counting; assays were LDH or trypan blue. The results indicate increased 490 nm signals (level, variance) by using phenol red or by increasing fetal bovine serum from 5% to 10%. The data also indicate that defoaming results in reduced variances ranging from a factor of 2 at 1-3 units of absorption, up to a factor of 4-5 at <1 units of absorption. Coulter counting indicated a decrease in cell volume with increasing end-point cell density, attributed to general shrinking at increasing density. In comparisons, total LDH was considered relative to both cell total volume and cell numbers. The result suggests that total LDH should be regarded as reflecting cell total volume rather than cell numbers. In a comparative Cu exposure test, signals of both LDH and a sodium salt of 4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulfonate (WST-1) decreased with increasing Cu supply, while bromodeoxyuridine signals remained largely unaffected. The data show the differences in responses in cell viability and proliferation, but, above all, indicate that LDH should be expressed on a per cell volume basis rather than per cell, to avoid the problem that mere density effects contribute to signals on compound or metal toxicity.

Influence of silicon on cobalt, zinc, and magnesium in baker's yeast, Saccharomyces cerevisiae

Silicon (Si, as silicate) is involved in numerous important structure and function roles in a wide range of organisms, including man. Silicate availability influences metal concentrations within various cell and tissue types, but, as yet, clear mechanisms for such an influence have been discovered only within the diatoms and sponges. In this study, the influence of silicate on the intracellular accumulation of metals was investigated in baker's yeast (Saccharomyces cerevisiae). It was found that at concentrations up to 10 mM, silicate did not influence the growth rate of S. cerevisiae within a standard complete medium. However, an 11% growth inhibition was observed when silicate was present at 100 mM. Intracellular metal concentrations were investigated in yeast cultures grown without added silicate (-Si) or with the addition of 10 mM silicate (+Si). Decreased amounts of Co (52%), Mn (35%), and Fe (20%) were found within +Sigrown yeast cultures as compared to -Si-grown ones, whereas increased amounts of Mo (56%) and Mg (38%) were found. The amounts of Zn and K were apparently unaffected by the presence of silicon. +Si enhanced the yeast growth rate for low-Zn2+ medium, but it decreased the growth rate under conditions of a low Mg2+ medium and did not alter the growth rates in high Zn2+ and Co2+ media. +Si doubled the uptake rate of Co2+ but did not influence that of Zn2+. We propose that a possible explanation for these results is that polysilicate formation at the cell wall changes the cell wall binding capacity for metal ions. The toxicity of silicate was compared to germanium (Ge, as GeO2), a member of the same group of elements as Si (group 14). Hence, Si and Ge are chemically similar, but silicate starts to polymerize to oligomers above 5 mM, whereas Ge salts remain as monomers at such concentrations. Ge proved to be far more toxic to yeast than Si and no influence of Si on Ge toxicity was found. We propose that these results relate to differences in cellular uptake.

A bisphosphonate monoamide analogue of DOTA: a potential agent for bone targeting

A new macrocyclic DOTA-like ligand (BPAMD) for bone imaging and therapy containing a monoamide bis(phosphonic acid) bone-seeking group was designed and synthesized. Its lanthanide(III) complexes were prepared and characterized by 1H and 31P NMR spectroscopy. The Gd(III)-BPAMD complex was investigated in detail by 1H and 17O relaxometric studies to inspect parameters relevant for its potential application as an MRI contrast agent. Sorption experiments were conducted with Gd(III) and Tb(III) complexes using hydroxyapatite (HA) as a model of bone surface. Very effective uptake of the Gd-BPAMD complex by the HA surface was observed in NMR experiments. Radiochemical studies with the (160Tb-BPAMD)-HA system proved the sorption to be remarkably fast and strong on one hand and fully reversible on the other hand. The strong (Gd-BPAMD)-HA interaction was also supported by 1H NMRD measurements in the presence of a hydroxyapatite slurry, which showed an increase of the rotational correlation time upon adsorption of the complex on the HA surface, resulting in a significant relaxivity enhancement. The amide-bis(phosphonate) moiety is the only factor responsible for the binding of the complex to HA.

Surface adsorption of metals onto the earthworm Lumbricus rubellus and the isopod Porcellio scaber is negligible compared to absorption in the body

In terrestrial organisms, bioaccumulation is usually based on a summation of the amount of metal adsorbed to the body wall and absorbed into the body. The relative proportions of metal adsorption and absorption are usually not quantified. In this study, the distinction between adsorbed and absorbed metals was investigated in two different terrestrial species exposed to metals for 2 weeks. The earthworm Lumbricus rubellus was chosen as representative for organisms mainly taking up metals via the dermal route, and the isopod Porcellio scaber as an organism taking up metals mainly via the alimentary tract. Cross-sections of whole animals were made using a cryostat and accumulated metals were localized by means of a phosphor screen (autoradiography). Radiolabels were used to determine the distribution of metals over the different organs and to distinguish between adsorption and absorption. Cd in the earthworm was mainly found in tissues of the chloragogenous region, whereas Zn was also found in various other organs and in the connective tissue. In the isopod, both Cd and Zn were mainly located in the hepatopancreas. Adsorbed amounts of Cd and Zn were negligible compared to internalized Cd and Zn concentrations for both organisms. Consequently, when focusing on effects of metal uptake for the organism itself, there is no need to correct for adsorption. This suggests that adsorption to the epidermis is not a rate limiting step in metal uptake by soil invertebrates.

Adsorption of metals to membrane filters in view of their speciation in nutrient solution

Filtration of a solution may lower metal concentrations through adsorption of metal species to the filter. Processes such as filter-sterilizing nutrient solution and filtration of field water are sensitive to these sorption artifacts, yet basic data on the affinity of different filters for metals are lacking. This article describes the adsorption of five metals to eight types of 0.2-microm membrane filters used for sterilizing a plant (Lemna minor L.) culture medium. Filters of cellulose acetate, cellulose nitrate, mixed cellulose ester, nylon, polyamide, polycarbonate, polyester, and polyvinylidene fluoride were tested for their affinity toward mono- (K), di-(Mn, Cu, Zn), and trivalent (lanthanum [La]) metals. Metal concentrations were quantified using radioisotopes and speciation was calculated. Results showed that metals had the lowest affinity for polycarbonate and nylon filters and the highest affinity for cellulose- and polyester-type filters. Furthermore, it was shown that the metal load on cellulose filters correlated best with free ion concentrations (indicating electrostatic attraction), while loads on other filters correlated better with total metal concentrations. Filtering a 5-ml solution of pH 5 did not affect its metal concentrations, ranging from 10 nM (La) to 49 microM (K). To minimize filtration artifacts, we propose using polycarbonate or nylon filters, especially when dealing with low volumes of high pH and low metal species concentrations.

Accumulation and elimination of lanthanum by duckweed (Lemna minor L.) as influenced by organism growth and lanthanum sorption to glass

Lanthanide emissions to the environment increase as a result of the growing industrial applications of these elements. However, robust data to evaluate the environmental fate of lanthanides are scarce. This article describes the accumulation and elimination of lanthanum (La) by common duckweed (Lemna minor L.). Speciation modeling was performed to assure that solubility products were not exceeded. It also showed that La was predominantly associated with ethylenediaminetetraacetic acid (EDTA). Lanthanum concentrations in plants and medium and the amounts sorbed to glass vessels were quantified by using the radioisotope 140La. The amount of La adsorbed on the glass reached values of 25% of the total La present. A model was formulated to describe La uptake in exponentially growing duckweed in the presence of an adsorptive surface. Growth-induced dilution appeared more efficient in lowering plant La concentrations than actual elimination. An elimination study revealed two compartments, of which the smallest eliminated 50 times faster than the bigger compartment, which eliminated mainly by growth dilution. The average bioconcentration factor was 2,000 L/kg fresh weight and 30,000 L/kg dry weight, comparable with those of other higher plants. At the applied concentration of 10 nM, no effects were observed on duckweed growth. However, the high bioconcentration factor warrants monitoring of lanthanide emissions.

Lanthanide concentrations in freshwater plants and molluscs, related to those in surface water, pore water and sediment. A case study in The Netherlands

Industrial emissions of lanthanides to aquatic ecosystems increase, but knowledge of the environmental fate of these metals is limited. Here we focus attention upon the distribution of lanthanides in freshwater ecosystems, describing lanthanide partitioning between sediment, water and biota. Since lanthanides are often used as oxidation-state analogues for actinides, their distribution can reflect long-term behaviour of the radioactive transuranics. Concentrations of all 14 naturally occurring lanthanides were measured by ICP-MS in Sago pondweed (Potamogeton pectinatus), common duckweed (Lemna minor), seven different mollusc species (tissue and shell), two sediment fractions (< 2 mm and < 63 microm), surface water and sediment pore water from five locations in The Netherlands. In all samples, the typical 'saw-tooth' lanthanide pattern was observed, which implies that lanthanides are transported as a coherent group through aquatic ecosystems. Typical deviations from this pattern were found for Ce and Eu and could be explained by their redox chemistry. The variation in concentrations in abiotic fractions was limited, i.e. within one order of magnitude. However, variations of up to three orders of magnitude were observed in biotic samples, suggesting different affinities among organisms for lanthanides as a group, with significant differences only among molluscs and pondweed samples in relation to sampling location. For P. pectinatus it was shown that pore water was the most important lanthanide source, and for snails, food (plants) seems to be the dominant lanthanide source. Lanthanides were not equally distributed between mollusc shell and tissue and the ratio of lanthanide concentrations in shell and tissue were dependent on the sampling location. Shells contained much lower concentrations and were relatively enriched in Eu, and to a lesser extent in Ce. Bioconcentration factors for lanthanides in plants and snails relative to surface water were typically between 10000 and 100000 l x kg(-1) dry matter, while sediment-water partition coefficients were between 100000 and 3000000 l x kg(-1) dry matter. There was a low extent of biomagnification in the plant-to-snail system, with a maximum biomagnification factor of 5.5. Many distribution coefficients displayed a slight decrease with atomic number. This can be attributed to the general increase in ligand stability constants with atomic number, keeping the heavier lanthanides preferentially in solution.

Predicting metal toxicity revisited: general properties vs. specific effects

The present paper addresses the prediction of metal toxicity by evaluation of the relationships between general metal properties and toxic effects. For this, metal toxicity data were taken from 30 literature data sets, which varied largely in exposure times, organisms, effects and effect levels. General metal properties were selected on basis of literature reviewing of basic metal property classifications: used were the electrochemical potential deltaE0; the ionization potential IP; the ratio between atomic radius and atomic weight AR/AW; and the electronegativity Xm. The results suggest that toxicity prediction may be performed on basis of these fixed metal properties without any adoption to specific organisms, without any division of metals into classes, or grouping of toxicity tests. The results further indicate that metal properties contribute to the observed effects in relative importances which depend on specific effects, effect levels, exposure times, selected organisms and ambient conditions. The discussion strongly suggests that prediction should be by interpolation rather than by extrapolation of calibrated toxicity data: the concept here is that unknown metal toxicities are predicted on basis of observed metal toxicities in calibration experiments. Considering the used metal properties, the calibration covers the largest number of metals by the simultanuous use of Ge(IV), Cs(I), Li(I), Mn(VII), Sc and Bi in toxicity studies. Based on the data from the 30 studies considered, metal toxicities could be ordered in a relative way. This ordering indicates that the natural abundance of metals or metal ions in the Earth's crust may be regarded as a general comparative measure of the metal toxicities. The problems encountered in toxicity interpretation and ordering of toxicities indicate that control of the solution acidity, the metal's solubility and the metal's oxidation state may be key problems to overcome in future metal ion toxicity studies.

Influence of salinity and eutrophication on bioaccumulation of 99technetium in duckweed

This study concerns the bioaccumulation of the long-lived nuclear waste product 99Tc in duckweed (Lemna minor L.). 99Tc was present as the oxyanion TcO4-, being the main chemical form of technetium in aerobic water systems. In contrast with terrestrial plants, bioaccumulation in duckweed proved to be independent of the nitrate concentration in the medium. However, uptake is controlled by electrostatic effects in the cell wall, which affects the bioaccumulation of 99Tc in duckweed in natural environments. These waters are characterized by a range of salinity and hardness, and this study suggests that this may result in up to a threefold difference in 99Tc accumulation. Because of screening of negative charges in the cell wall, the highest accumulation may be expected in hard, brackish water. This behavior can be described by a general model, which includes electrostatic effects and binding of cations at the cell wall. The model also explains why cationic radionuclides are preferably taken up in soft, fresh water while anionic species are concomitantly taken up in hard, chlorine-rich waters.

Accumulation of 99Tc in duckweed Lemna minor L. as a function of growth rate and 99Tc concentration

This study focuses on the question of whether short-term studies can be used to forecast the accumulation of the long-lived fission product 99Tc in duckweed, Lemna minor L., grown in the field; in other words, are the accumulation parameters independent of changing growth rates typical of natural populations of duckweed. Two processes determine the 99Tc accumulation: (i) uptake and release of 99TcO4-, characterised by a concentration factor, Kd, and (ii) first-order reduction and complexation of TcVII, characterised by kred. At various 99Tc concentrations, the growth, total Tc and TcO4- accumulation were monitored over 10 days; parameters were fitted and compared with earlier results. Both Kd and kred turn out to be independent of time, concentration and growth rate up to a concentration of 10(-6)mol l(-1) 99TcO4-. Concentrations above this level result in toxic effects. The Tc accumulation in field populations of duckweed at Tc concentrations which generally occur in the environment can be forecasted by using the results from short-term experiments.

Relationship between epiphytic lichens, trace elements and gaseous atmospheric pollutants

A study was conducted to determine the joint effect of gaseous atmospheric pollutants and trace elements on epiphytic lichens. We used our data to test the hypothesis that lichens are generally insensitive to toxic effects of trace elements, and can therefore be used as accumulator organisms to estimate concentrations of these elements in the environment. In a field study in The Netherlands the abundance of epiphytic lichen species was estimated, and their supporting bark was collected. Concentrations of a range of trace elements were determined in the bark, and concentrations of atmospheric trace gases were estimated at the sites of collection. Multivariate statistics were used to determine the relation between the abundance of the species and pollutant concentrations. Atmospheric SO2 and NO2 appeared to be the most important factors determining lichen biodiversity. Nearly all species were sensitive to these compounds. The effect of the other trace elements was very slight; only Sb had a significantly negative effect on the abundance of a few species. It is concluded that lichens can safely be used as accumulator organisms in pollution studies, provided that concentration in lichen thalli reflect atmospheric concentrations.

On the variability of plant bio-concentration factors (BCF) of environmental radionuclides: a case study on the effects of surface film and free space on the interpretation of 99mTcO4- sorption in duckweed

The present paper addresses plant bioaccumulation factor (BCF) variability, and specifically focuses attention upon the handling of duckweed (Lemna gibba) material, sampled from experimental media, especially considering accumulation/kinetic studies with 99mTcO4-. In these short-term studies, relatively small BCF-values may be encountered, with related interferences in its assessment due to the presence of 99mTcO4- in the surface film medium (SF) and in the cellular water free spaces (FS). The sample handling methods used to remove the SF + FS component of the accumulated 99mTcO4- consisted of blotting, centrifugation and rinsing. The three methods were investigated using D-[1-(14)C]mannitol, 42K+, 82Br- and 99mTcO4- radioisotopes, which were measured by beta- and gamma-spectrometry, in both solution and solid samples. Centrifugation seems the most promising method to remove SF + FS 99mTcO4-. Results based on both mass analysis and radioactivity determinations in centrifugated fluids are independent of applied concentrations (10(-11) to 10(-13) mol m(-3) 99mTcO4-), and are invariably compatible with the conceptual idea of the FS as a free-entrance phase for solutes. Blotting results in an overestimation of BCF values (up to factor 3 for the 99mTcO4- experiments performed), probably due to the incomplete removal of the SF + FS, and is suggested to yield irregular results, leading to high variances in BCF values obtained. The application of an efflux/rinsing period is indicated to result in an underestimation of BCF values (up to factor 10 for the 99mTcO4- experiments performed), probably due to excess removal of (non-SF + FS) components of accumulated solutes. Here we advocate centrifugation as a routine sample handling method to avoid SF + FS interferences in short-term (kinetic) 99mTcO4- uptake studies in duckweed. Moreover, the results suggest a more general applicability of centrifugation as a sample handling method to avoid SF + FS interferences in short-term element accumulation studies; centrifugation approaches should, however, be adjusted to plant cell characteristics.

Uptake kinetics of 99Tc in common duckweed

The uptake of the nuclear waste product technetium-99 was studied in common duckweed (Lemna minor). In addition to measurements, a model involving two compartments in duckweed with different chemical forms of technetium was derived. The model was tested by chemical speciation, i.e. differentiating between reduced Tc-compounds and Tc(VII)O(4)(-). The TcO(4)(-) concentrations measured were in good agreement with those predicted by the model. Two processes determine technetium uptake: (1) transport of Tc(VII)O(4)(-) across the cell membrane, and (2) reduction of Tc(VII). The TcO(4)(-) concentration in duckweed reaches a steady state within 2 h while reduced Tc-compounds are stored, as a result of absence of release or re-oxidation processes. Bioaccumulation kinetic properties were derived by varying 99Tc concentration, temperature, nutrient concentrations, and light intensity. The reduction of technetium in duckweed was highly correlated with light intensity and temperature. At 25 degrees C the maximum reduction rate was observed at light intensities above 200 µmol m(-2) s(-1) while half of the maximum transformation rate was reached at 41 µmol m(-2) s(-1). Transport of TcO(4)(-) over the cell membrane requires about 9.4 kJ mol(-1), indicating an active transport mechanism. However, this mechanism behaved as first-order kinetics instead of Michaelis-Menten kinetics between 1x10(-14) and 2.5x10(-5) mol l(-1) TcO(4)(-). Tc uptake could not be inhibited by 10(-3) mol l(-1) nitrate, phosphate, sulphate or chloride.

Distribution in Portugal of some pollutants in the lichen Parmelia sulcata

During the months of July and August 1993 a lichen (Parmelia sulcata Taylor) collection campaign was held in Portugal where samples were obtained from olive tree bark at 228 sites, following a grid of 10 x 10 km along the Atlantic coast and 50 x 50 km in the interior of the country. The samples were analysed by instrumental neutron activation analysis and proton induced X-ray emission techniques. Concentration data patterns for the pollutants As, Cr, Hg, Ni, Pb, S, Sb, Se, and V were obtained for the whole country surface by making use of an extinction rule of 1/r(3), preventing any cut-off distance from being artificially introduced. Some pollution sources were identified: (1) oil-powered plants on the Lisbon-Setúbal axis (V, Ni), (2) coal-power plants in Porto and Sines (S, Se), (3) traffic in the northern area and the Lisbon-Setúbal axis (Pb), (4) a chemical industry south of Porto (Hg, As), and (5) soil influence (Cr, Sb). Arsenic and chromium results largely exceed, in a few areas, the concentrations acceptable to plants, and in a few spots also Hg, Ni, and Pb data.

129I and 36Cl concentrations in lichens collected in 1990 from three regions around Chernobyl

129I and 36Cl were measured by accelerator mass spectrometry in 11 lichen samples (Parmelia sulcata) collected in 1990 from three regions (Novozybkov, Bragin and Ovruc) near Chernobyl. Previously measured activities of 137Cs were highest in the samples from the Novozybkov region while the measured activities of 36Cl and 129I in this study were highest in the samples from the Bragin region. The regional distribution patterns of the 36Cl and 129I show a positive correlation suggesting that these volatile radionuclides were deposited in the same manner.

Relations between sulphate, ammonia, nitrate, acidity and trace element concentrations in tree bark in The Netherlands

Bark flakes were sampled in a biomonitoring survey throughout The Netherlands. Tree species used were oak (65 samples) and 'non-oak' (58 samples) (poplar, elm, willow). Bark elemental analysis was carried out for As, Br, Ca, Cd, Ce, Co, Cr, Cs, Fe, Hg, K, La, Na, Ni, Pb, Rb, Sb, Sc, Se, Sm, Th, and Zn. Furthermore, bark acidity, SO4, NH4 and NO3 were determined. Further variables introduced into the data-set were DIST (closest distance to sea water) and the dummy variably OAK (tree species).Straightforward multivariate correlation analysis was performed to check the effects on bark metal retention of the non-metal pollutants SO4, NH4 and NO3, and of bark acidity. The OAK variable served to identify species-specific metal and non-metal pollutant behaviour. The DIST variable was used to visualize geography(source)-related variations in bark metal and non-metal pollutant concentrations, and to account for the non-random distribution of OAK and non-OAK tree species.The results indicate that the non-oak and oak bark samples may be combined to form 123 samples containing data-set for As, Br, Cd, Ce, Co, Fe, La, Na, Sc, Sm, Th, Zn, NH4, NO4, SO4 and acidity, but not for Rb, Cs, Se, K, Ni, Pb and Sb (species-specific) and for Ca and Hg (H(+)-dependent). In the presented data-set, bark sulphate, ammonia and nitrate could not be shown to significantly affect bark metal retention.

Atmospheric heavy metal pollution in Slovenia derived from results for epiphytic lichens

In 1992, a monitoring survey has been started on the national scale in Slovenia using the epiphytic lichen Hypogymnia physodes (L.) Nyl. The primary aim has been to analyse lichens using the k(0)-based INAA method to obtain information about the levels of elements in the atmosphere and to identify significant pollution sources. Monte Carlo-Assisted Factor Analysis was applied to a data set of the 28 elements As, Ag, Ba, Br, Ce, Cd, Co, Cr, Cs, Fe, Ga, Hf, Hg, K, La, Mo, Na, Rb, Sb, Sc, Se, Sr, Sm, Tb, Th, U, W and Zn, which have been selected from the elements determined as the most important ones for the identification of pollution sources. A Monte Carlo approach has been used to give more insight into the uncertainties and significance levels of the factor analysis results. It has been found that concentration patterns in lichens yielded 9 factors (source types) which are presented and discussed in detail. The geographical patterns of the contributions of all factors are also shown.

Moss interspecies comparisons in trace element concentrations

Within the framework of a European-scaled moss survey, various moss species were sampled throughout The Netherlands [NL], Germany [D], and Switserland [CH], and used in moss interspecies comparisons of elemental concentrations. Moss species considered were Pleurozium schreberi [NL,D,CH], Brachythecium rutabulum [NL], Hypnum cupressiforme [D,CH], Hylocomium splendens [D,CH], and Scleropodium purum [D]. Element analysis was carried out directly (The Netherlands, Instrumental Neutron Activation Analysis: As, Br, Ce, Cr, Cs, Fe, La, Mn, Na, Rb, Sc, Se, Sm, Th, Ti, V and Zn), or after sample digestion (The Netherlands, ICP-MS: Pb, Germany, AAS/ICP-AES: Cd, Cr, Cu, Fe, Ni, Pb, Ti, V, and Zn; Switzerland, ICP-AES/ICP-MS: Co, V, and Zn).Local variations (=within sampling sites) in element concentrations were estimated, based upon in-site multiple sampling and analysis of Pleurozium schreberi species in The Netherlands. Element concentrations in moss species were compared in linear correlations, both in unweighted and weighted fits, with weighing factors based on the local variation data. Weighted fits were shown to generally improve the calibration characteristics, as tracked by X (2) calculations.The calibration data suggest the presence of previously unnoticed outliers in element concentrations. The absence of further information, however, may prescribe the use of all data in comparison procedures. These results indicate that interlaboratory analysis of replicate samples and the use of dedicated certified reference materials may help solving problems in the analysis of the sample series.For several of the considered interspecies comparisons, weighted calibrations could be based on significant correlations (P=0.05). Actual use, however, will remain arbitrarily decided upon, and may be based on decisions as to what to accept with respect to the levels of uncertainty in the calibration parameters. Furthermore, the use of calibrations in extrapolation modes is greatly restricted by the necessary reservations in geographically larger-scaled applications.

On the uptake and release of zinc (65Zn) in the growing alga Selenastrum capricornutum Printz

A Zn- and pH-buffered medium was used to study the accumulation of Zn in batch-cultured algae (Selenastrum capricornutum Printz.). All experiments were carried out using (65)Zn radiotracers, which were measured by gamma-ray spectrometry. Zinc was applied in the presence of nitrilotriacetic acid (NTA), leading to free Zn(2+) concentrations ranging from 4.2 x 10(-11) to 1.6 x 10(-7) mol litre(-1). During the 75-h experiments, the rates of Zn influx and efflux were determined, the latter with full consideration for algal growth rates. Algal growth stopped completely at a free Zn(2+) concentration of 1.6 x 10(-8) mol litre(-1). Initial Zn binding was determined and, based on free Zn(2+) concentrations, presented by the apparent dissociation constant K(diss) and capacity C as 4.6 x 10(-9) mol litre(-1) and 19.8 x 10(6) mol gDW(-1), respectively. The rate constant of Zn efflux could be calculated as a constant 0.021 +/- 0.003 h(-1), irrespective of the Zn concentrations applied. The rates of Zn influx were expressed by the V(max) and K(M) values as 3.3 x 10(-10) mol gDW(-1) s(-1) and 6.3 x 10(-9) mol litre(-1), respectively. These values, which are based on applied free Zn(2+) concentrations, are compatible with the operation of a high-affinity low-concentration carrier mechanism. The results suggest that, under the conditions applied, free Zn(2+) may be the most relevant Zn species for Zn uptake; furthermore, relative growth rate may be regarded as a relatively sensitive signal for Zn stress circumstances.

Absorption and retention studies of trace elements and minerals in rats using radiotracers and whole-body counting

A description is given of a whole-body counting technique using radiotracers, permitting the determination of true absorption and endogenous excretion of trace elements and minerals in the rat in vivo. This non-invasive counting method involves oral and intraperitoneal administration of tracer doses of a radioisotope in a cross-over fashion and subsequent measurement of the whole-body retention in a whole-body counter. Thus, true absorption can be determined in one animal which contributes to the reduction of animal use. To study the variations in counting response due to radioisotope distribution, to size or shape of the animal body, the influence of the position of a point source and distribution over different phantoms to simulate various body sizes are experimentally evaluated for 64Cu, 65Zn, 59Fe and 28Mg. Results from 2 studies, with 64Cu and 28Mg, as an example for a trace element and a mineral respectively, are presented and illustrate that absorption as measured by apparent absorption does not necessarily reflect true absorption. True absorption as determined by the whole-body retention method using radioisotopes corrects for faecal losses of endogenous origin.

Role of cytosolic copper, metallothionein and glutathione in copper toxicity in rat hepatoma tissue culture cells

Effects of metallothionein (MT) synthesis inhibiting compounds (actinomycin D, cycloheximide), MT synthesis stimulating compounds (dexamethasone, dibu-cAMP) and interfering metals (Cd, Zn) on copper accumulation were investigated in rat hepatoma tissue culture cells. Copper-metallothionein (Cu-MT) and MT-associated copper levels were determined to find a possible correlation between cytosolic copper concentrations and MT as a Cu-detoxifying protein. Further, intracellular non-MT associated copper levels and levels of GSH and SOD were determined. Cell viability was tested under all experimental conditions by measuring LDH-release, K+ uptake and total cell protein. Administration of dexamethasone and dibu-cAMP showed no effect on MT levels (compared with controls), and only a marginal effect on 64Cu and total Cu accumulation. Administration of actinomycin D resulted in increased copper accumulation in the particulate fraction, possibly due to inhibition of copper secretion processes and/or protein synthesis. Presence of zinc had no effect on MT levels nor on total Cu and 64Cu levels, in contrast with cadmium which drastically enhanced copper accumulation and MT levels in the cells. Cu/MT ratios varied from 1.0 +/- 0.3 to 3.3 +/- 1.2, which is far below the assumed maximum molar ratio of 8-12 mol Cu per mol MT. SOD levels appeared to be enhanced up to 2- or 3-fold in the presence of Cd2+, relative to control values. The role of GSH as Cu-intermediate in intracellular Cu distribution plus its role in copper defence mechanism(s) was tested by application of BSO, an inhibitor of GSH synthesis. It was found that BSO had no effect on intracellular MT level; it was found however that MT-bound copper levels were markedly decreased. The results presented support a model for copper metabolism in hepatoma tissue culture (HTC) cells, where Cu(I) is complexed by GSH immediately after entering the cell. GSH is capable of transferring copper to MT where it is stored. Depletion of GSH (by administration of Cd2+, actinomycin D, cycloheximide) almost instantaneously results in enhanced cellular toxicity. When also MT is depleted (by actinomycin D) non-MT associated, 'free' cytosolic Cu2+ is elevated, and HTC cells rapidly loose their resistance to copper toxicity, as also reflected in loss of cell viability (LDH, K+ and total cell protein).

Factor analysis of trace-element data from tree-bark samples in The Netherlands

Monte Carlo-assisted factor analysis has been applied to a data set of 20 trace-element concentrations in tree-bark samples obtained from 123 locations in The Netherlands, with the aim to investigate the suitability of bark as a biomonitor for air pollution. A Monte Carlo approach was used to give more insight to the uncertainties and significance levels of the factor analysis results. Notwith-standing a rather strong influence of soil material on the concentration levels, factor analysis enabled the identification of five significant pollution source types, all of which corresponded with source types found in an earlier biomonitoring study in The Netherlands using epiphytic lichens. A more detailed comparison with the lichen results showed a remarkable difference in lead concentrations between bark and lichen. It was concluded that bark can be successfully employed as a biomonitor for air pollution. The power of factor analysis to adequately determine the soil contribution may render extensive sample washing procedures superfluous.

The possible role of selenium in antioxidation in marine waders; a preliminary study

In a marine wader, the oystercatcher (Haematopus ostralegus), the activity of the selenium-dependent enzyme glutathione peroxidase (GSH-Px) in the red blood cells (RBC) was measured. The average activity, 97 +/- 19 units/g Hb, is within the range reported for mammals. No correlation was observed between the selenium concentration and GSH-Px activity in the erythrocytes and it is calculated that only a small percentage of the selenium present in the RBC is bound to the enzyme. Therefore, it is concluded that the high selenium concentrations in the avian red cells cannot be ascribed to GSH-Px. It is argued that a function of selenium in antioxidation is still possible. The positive relationship found between selenium and iron concentrations in the tissues of the oystercatcher directs to such a role. A pitfall in the measurement of GSH-Px activity is outlined.

Have high selenium concentrations in wading birds their origin in mercury?

The relationship between selenium and mercury in marine waders from the Wadden Sea (known to have high tissue selenium concentrations), was investigated in the framework of the possibility that high mercury concentrations may have induced parallel selenium accumulation to detoxify the mercury. The selenium and mercury concentrations are shown to be negatively correlated in both the liver and kidneys of these birds. In the tissues and red blood cells of oystercatchers, positive correlations between the two elements are found. The atom increment Se/Hg ratio in the pooled oystercatcher tissue and red cell data is 32:1. This ratio greatly exceeds the 1:1 ratio found when selenium is accumulated to detoxify mercury. Furthermore, breeding females are able to excrete mercury independently of selenium from the red blood cells, probably into the eggs; the whole egg mercury concentrations of the local breeding populations are low. From these results it is concluded that the high selenium concentrations in waders do not have their origin in elevated levels of mercury.

Effects of copper on rat hepatoma HTC cells and primary cultured rat hepatocytes

Cellular responses to copper, applied in concentrations varying from 0.5 to 200 microM Cu2+, were investigated in two different cell types: rat hepatoma cells (HTC) and primary cultured rat hepatocytes. Accumulation of 64Cu, copper (AAS) levels, cellular viability parameters (cell growth and proliferation, LDH leakage, total cell protein, K+ uptake, and ATP levels), and cell toxicity parameters (metallothionein (MT), glutathione (GSH) and superoxide dismutase (SOD)) were examined over 24 hr incubation periods. Accumulation of radiolabeled copper (applied copper concentrations: 15-200 microM Cu2+) showed a four-fold increase in HTC cells (0.88-3.45 nmol Cu/mg cell protein) and a three-fold increase in hepatocytes (4.94-14.66 nmol Cu/mg cell protein), although quantitative uptake in HTC cells was five times lower. Most of the copper accumulated in the hepatoma cells and hepatocytes was found predominantly in the particulate fraction (i.e., cell membranes and organelles), while only a small quantity was present in the soluble fraction (cell cytosol). Metallothionein concentrations in HTC cells were increased from 43 pmol/mg cell protein (0.5 microM Cu2+ application) up to 223 pmol/mg cell protein (200 microM Cu2+ application), whereas MT in rat hepatocytes were elevated from 139 pmol/mg cell protein to 546 pmol/mg cell protein over the same range of administered Cu2+. Metallothionein synthesis rendered both cell types well equipped to deal with increasing intracellular copper levels. In hepatocytes however, MT synthesis resulted in decreasing non-MT-associated copper levels in the cytosol for Cu administrations up to 100 microM. Above that point however, MT failed to stay in line with increasing cytosolic Cu levels, resulting in cytotoxic effects shown by changes in cell viability and GSH/SOD levels. In HTC cells MT synthesis suppressed the free Cu levels in the cytosol to below 0.1 nmol Cu/mg cell protein over the total range of copper concentrations applied. The results presented indicate that hepatoma HTC cells are more capable of dealing with high accumulated Cu levels than the better established rat hepatocytes. Furthermore, it is clear that comparison of these two cell types regarding their ability to respond on (sub)toxic Cu should be discussed with full consideration for the copper applications involved.

The bioavailability of various selenium compounds to a marine wading bird

The uptake of dietary selenium (about 3.5 mg/kg AF dry wt) as selenomethionine, selenocystine, selenite, selenate, and fish selenium in the plasma and red blood cells (RBC) of the oystercatcher has been investigated. The birds received the various selenium compounds subsequently, for at least 9 wk. After dietary supplementation of selenocystine, selenite, and selenate, plasma selenium was about 350 micrograms/L and RBC selenium 2.1 mg/kg dry wt. After supplementation of selenomethionine, the plasma concentration increased to 630 micrograms/L, and the RBC concentration to 4.1 mg/kg dry wt. When the fodder contained 3.1 mg/kg fish Se, an average plasma and RBC concentration of 415 micrograms/L and 14.4 mg/kg dry wt, respectively, was measured. The maximal increase of the selenium concentration in the plasma was attained at first sampling, 14 d after a change in dietary selenium (selenomethionine or fish Se); the uptake seemed to be a concentration-regulated process. RBC concentrations (Y in mg/kg drug wt) increased with time (X in d) according to Y = a - b e-cX. Fifty percent of the total increase was attained within 17 d, suggesting that diffusion into the RBC played a role. The selenium concentration in the plasma was positively correlated with the (fish)Se concentration in the fodder; the RBC concentration (60 d after the change in diet) was positively correlated with the plasma concentration. When the diet contained fish Se, the blood selenium concentrations of the captive birds were similar to the concentrations measured in field birds. Fish Se is a yet undetermined selenium compound. The present experiment showed that fish Se differed from selenomethionine, selenocystine, selenite, or selenate in uptake from the food and uptake in the RBC.

Determination of zinc-65, copper-64 and sulphur-35 labelled rat hepatoma tissue culture metallothioneins by high-performance liquid chromatography with on-line radioactivity detection

Molecular size exclusion (MSE), reversed-phase (RP), and anion-exchange (AE) high-performance liquid chromatography (HPLC) techniques were employed in combination with on-line radioactivity detection, in a study on the kinetic behaviour of 65Zn-, 64Cu- and [35S]cysteine-labelled metallothionein (MT) in rat hepatoma tissue culture (HTC) cells. MSE-HPLC of [35S]cysteine-labelled HTC cell cytosol resulted in co-eluting MT-I and MT-II isoforms (tR 19.80 min; Ve/Vo: 1.85). AE-HPLC of 65Zn-treated HTC cell cytosol yielded separated 65Zn MT-I (tR 11.5 min; I = 64 mM) and 65Zn MT-II (tR 14.5 min; I = 104 mM). RP-HPLC of 64Cu-treated HTC cytosol resulted in separated 64Cu MT-I (tR 26.4 min) and 64Cu MT-II (tR 23.4 min). Determination of the amino acid composition, apparent molecular mass and cysteine content of HTC MT-I and MT-II isoforms showed the characteristics of class I metallothioneins. The rate of dissociation of Zn2+ from Zn-MT could be determined from the losses of 65Zn from MT during a single AE-HPLC run, showing a Zn-MT dissociation half-life of 0.66 h. RP-HPLC showed a delay in incorporation of newly accumulated 64Cu into MT, possibly owing to the appearance of reduced glutathione as an intracellular copper-transfer compound. Application of compartmental analysis in [35S]-cysteine accumulation experiments permitted the determination of the actual rate of MT degradation; when 200 microM of Zn were applied, the MT degradation half-life was 2.0 +/- 0.8 h. These results indicate the potential of combined HPLC techniques and application of radionuclides in studies on the synthesis and degradation of MT and metal-MT complexes.