Uncertainty evaluation of non-invasive multi-parameter detector measurements in quality assurance of diagnostic radiology

OBJECTIVE

To optimize the patient dose and image quality through quality assurance (QA) of diagnostic x-ray equipment and to ensure compliance with international and national standards in x-ray specification parameters, the use of contactless and quick non-invasive instruments has gained importance. Considering the importance of equipment qualification and the intervention level for equipment management, it is vital to account for uncertainties in the measurement of parameters in diagnostic radiology. However, the limits and measurement uncertainties associated with the parameter measurement are not well established and many technical and scientific literature provide different tolerance values, either as absolute or in terms of percentage.

METHODS AND MATERIALS

In this paper, the authors analyze non-invasive multi-parameter detector measurements with the aim to (i) improve the accuracy in measurement of x-ray parameters (kilovoltage, dose, and exposure time); (ii) estimate the uncertainty associated with such measurements; (iii) analyze the tolerance values prescribed by various professional and regulatory bodies and propose an improvised method of reporting the parameters. The approach adopted in this paper takes into account the uncertainties associated with traditional instruments and the subjectivity in the measurements.

RESULTS

Estimated uncertainty for kV measurements in the range between 1.45 kV at 40 kV measurements and 4.88 kV at 150 kV measurements. The MU associated with the dose measurement is estimated to be 6.2% at 110 kVp, 100 mA, and 500 msec. Maximum MU estimated at 10 msec exposure time is 4.5% and with MU of 5% deviation added to 9.5%.

CONCLUSIONS

The current practice of reporting the measured mean values deviation without considering the inherent measurement uncertainty may not be a correct quantification procedure in QA. This is evident from the case study that 3% addition to the measured kV, 6.2% addition in the measured dose, and 4.5% to the measured time accounts for measurement uncertainty.

NUCLEAR MEDICINE PROCEDURE VOLUME AND ESTIMATION OF COLLECTIVE EFFECTIVE DOSE IN TAMIL NADU TOWARDS THE ESTABLISHMENT OF DIAGNOSTIC REFERENCE LEVEL

With an objective to establish adult diagnostic reference levels in the practice of nuclear medicine (NM) in the state of Tamil Nadu (TN), data on the predominant NM procedures carried out in the state are analyzed. In this study, data on total NM diagnostic procedures during the years 2015-19 along with patient-specific diagnostic NM procedure data for the period April-June 2021 from all centers in Tamil Nadu are collected and analyzed using SPSS statistical software. Nine predominant types of NM scans are analyzed. Collective effective dose from NM scans and per capita dose for the TN population are estimated. The 75th percentile of the distribution and average administered activity (AAA) has been derived and local reference levels are reported. Based on the statistical analysis, it is observed that the whole-body positron emission tomography (PET), renal diethylenetriamine pentaacetate (DTPA) scan, bone methylene diphosphonate (MDP) scan, iodine-131 whole body scan, thyroid studies using Technetium per technetate, renal dimercaptosuccinic acid (DMSA), myocardial perfusion methoxyisobutyl isonitrile sestamibi (MIBI), mebrofenin, Galium-68 prostate-specific membrane antigen (PSMA) are the most common procedure covering >90% of the practices carried out. The collective effective dose is 410 man-Sv in the year 2019, leading to a mean effective dose of 0.006 mSv per capita of the TN state population. The 75th percentile of the distribution of AA is slightly higher than diagnostic reference level (DRL) as compared with Australian DRL (310 MBq). It is also observed that F-18 PET procedures are primarily responsible for most of the collective effective dose, local DRL is 316 MBq and it is important to establish national DRLs for NM diagnostic scans to optimize the NM examinations.

OCCUPATIONAL EXPOSURE IN RADIATION APPLICATIONS IN INDIA: TRENDS AND DISTRIBUTION ANALYSIS

Occupational exposure data in radiation applications provide a good insight on the radiation risks to workers from occupational hazards, the safe practices adopted and in deriving methods to prevent possible radiation exposures. The analysis of occupational exposure may be used to provide regulatory guidance and more focused attention to improve the safety systems, thus improving the personnel and environment safety. In this study, occupational exposure from radiation applications during 2004-18 amounting to a total number of 1951 486 occupational dose data are collected and analysed using the statistical software package, SPSS. As recommended by the United Nations Scientific Committee on the Effects of Atomic Radiation, four critical parameters viz., annual collective effective dose, average annual effective dose, individual dose distribution ratio and the annual collective dose distribution ratio for each practice are estimated. Using the trend observed for these parameters, it is predicted that occupational exposure in diagnostic radiology in the year 2023 would increase by 80% in total number of monitored with 76% increase in average collective dose and no significant change in average annual effective dose. In the same manner, nuclear medicine would see 28% of increase in radiation workers with the increase of 24% in collective dose with no significant change in average annual effective dose. Further, the reasons and area of regulatory focus for the different practices are discussed.

A new genetic locus for self-compatibility in the outcrossing grass species perennial ryegrass (Lolium perenne)

BACKGROUND

Self-incompatibility (SI) is a physiological mechanism that many flowering plants employ to prevent self-fertilization and maintain heterozygosity. In the grass family this is known to be controlled by a two locus (S-Z) system; however, the SI system is intrinsically leaky. Modifier genes of both the S and Z loci and a further locus, T, are known to override SI leading to self-fertilization and self-seed production. This has implications for the ecological and evolutionary success as well as the commercial breeding of grasses. Here we report a study where the genetic control of self-compatibility (SC) was determined from the results of self-pollinating an F2 population of perennial ryegrass from two independently derived inbred lines produced by single-seed descent.

METHODS

In vitro self-pollinations of 73 fertile plants were analysed. A genetic association analysis was made with a panel of 1863 single-nucleotide polymorphism (SNP) markers, generated through genotype-by-sequencing methodology. Markers were placed on a recombination map of seven linkage groups (LGs) created using Joinmap v.5. The seed set on self- and open-pollinated inflorescences was determined on 143 plants, including the 73 plants analysed for self-pollination response.

KEY RESULTS

Self-pollinations revealed a bimodal distribution of percentage SC with peaks at 50 and 100 %. A single quantitative trait locus (QTL) was identified with peak association for marker 6S14665z17875_11873 that mapped to LG 6. Peak position was associated with maximum marker segregation distortion. The self-compatible plants were equally fecund after self- and open pollination.

CONCLUSIONS

This is the first report in the Poaceae family of an SC locus located on LG 6. This new SC QTL discovery, as well as indicating the complex nature of the pollen-stigma recognition process and its evolutionary significance, provides an additional source of SC for breeding perennial ryegrass.

Macrophage cytokine responses to commensal Gram-positive Lactobacillus salivarius strains are TLR2-independent and Myd88-dependent

The mechanisms through which cells of the host innate immune system distinguish commensal bacteria from pathogens are currently unclear. Toll-like receptors (TLRs) are a class of pattern recognition receptors (PRRs) expressed by host cells which recognize microbe-associated molecular patterns (MAMPs) common to both commensal and pathogenic bacteria. Of the different TLRs, TLR2/6 recognize bacterial lipopeptides and trigger cytokines responses, especially to Gram-positive and Gram-negative pathogens. We report here that TLR2 is dispensable for triggering macrophage cytokine responses to different strains of the Gram-positive commensal bacterial species Lactobacillus salivarius. The L. salivarius UCC118 strain strongly upregulated expression of the PRRs, Mincle (Clec4e), TLR1 and TLR2 in macrophages while downregulating other TLR pathways. Cytokine responses triggered by L. salivarius UCC118 were predominantly TLR2-independent but MyD88-dependent. However, macrophage cytokine responses triggered by another Gram-positive commensal bacteria, Bifidobacterium breve UCC2003 were predominantly TLR2-dependent. Thus, we report a differential requirement for TLR2-dependency in triggering macrophage cytokine responses to different commensal Gram-positive bacteria. Furthermore, TNF-α responses to the TLR2 ligand FSL-1 and L. salivarius UCC118 were partially Mincle-dependent suggesting that PRR pathways such as Mincle contribute to the recognition of MAMPs on distinct Gram-positive commensal bacteria. Ultimately, integration of signals from these different PRR pathways and other MyD88-dependent pathways may determine immune responses to commensal bacteria at the host-microbe interface.

Seizure detection and epileptogenic zone localisation on heavily skewed MEG data using RUSBoost machine learning technique

Background: Epilepsy is a neurological disorder which is characterised by recurrent and involuntary seizures. Magnetoencephalography (MEG) is clinically used as a presurgical tool in locating the epileptogenic zone by localising either interictal epileptic discharges (IEDs) or ictal activities. The localisation of ictal onset provides reliable and more accurate seizure onset zones rather than localising the IEDs. Ictals or seizures are presently detected during MEG analysis by manually inspecting the recorded data. This is laborious when the duration of recordings is longer. Methods: We propose a novel method which uses statistical features such as short-time permutation entropy (STPE), gradient of STPE (GSTPE), short-time energy (STE) and short-time mean (STM) extracted from the ictal and interictal MEG data of drug resistant epilepsy patients group. Since the data is heavily skewed, the RUSBoost algorithm with k-fold cross-validation is used to classify the data into ictal and interictal by using the four feature vectors. This method is further used for localising the epileptogenic region using region-specific classifications by means of the RUSBoost algorithm. Results: The accuracy obtained for seizure detection is 93.4%. The specificity and sensitivity for the same are 93%. The localisation accuracies for each lobe are in the range of 88.1-99.1%. Discussion: Through this ictus detection method, the current scenario of laborious inspection of the ictal MEG can be reduced. The proposed system, thus, can be implemented in real-time as a better and more efficient method for seizure detection and further it can prove to be highly beneficial for patients and health-care professionals during real-time MEG recording. Furthermore, the identification of the epileptogenic lobe can provide clinicians with useful insights, and a pre-cursor for source localisation.

An Immortalized Genetic Mapping Population for Perennial Ryegrass: A Resource for Phenotyping and Complex Trait Mapping

To address the lack of a truly portable, universal reference mapping population for perennial ryegrass, we have been developing a recombinant inbred line (RIL) mapping population of perennial ryegrass derived via single seed descent from a well-characterized F2 mapping population based on genetically distinct inbred parents in which the natural self-incompatibility (SI) system of perennial ryegrass has been overcome. We examined whether it is possible to create a genotyping by sequencing (GBS) based genetic linkage map in a small population of the F6 generation of this population. We used 41 F6 genotypes for GBS with PstI/MspI-based libraries. We successfully developed a genetic linkage map comprising 6074 SNP markers, placing a further 22080 presence and absence variation (PAV) markers on the map. We examined the resulting genetic map for general and RIL specific features. Overall segregation distortion levels were similar to those experienced in the F2 generation, but segregation distortion was reduced on linkage group 6 and increased on linkage group 7. Residual heterozygosity in the F6 generation was observed at a level of 5.4%. There was a high proportion of chromosomes (30%) exhibiting the intact haplotype of the original inbred parents of the F1 genotype from which the population is derived, pointing to a tendency for chromosomes to assort without recombining. This could affect the applicability of these lines and might make them more suitable for situations where repressed recombination is an advantage. Inter- and intra-chromosomal linkage disequilibrium (LD) analysis suggested that the map order was robust. We conclude that this RIL population, and subsequent F7 and F8 generations will be useful for genetic analysis and phenotyping of agronomic and biological important traits in perennial ryegrass.

Quantitative trait loci associated with different polar metabolites in perennial ryegrass - providing scope for breeding towards increasing certain polar metabolites

Background

Recent advances in the mapping of biochemical traits have been reported in Lolium perenne. Although the mapped traits, including individual sugars and fatty acids, contribute greatly towards ruminant productivity, organic acids and amino acids have been largely understudied despite their influence on the ruminal microbiome.

Results

In this study, we used a targeted gas-chromatography mass spectrometry (GC-MS) approach to profile the levels of 25 polar metabolites from different classes (sugars, amino acids, phenolic acids, organic acids and other nitrogen-containing compounds) present in a L. perenne F2 population consisting of 325 individuals. A quantitative trait (QTL) mapping approach was applied and successfully identified QTLs regulating seven of those polar metabolites (L-serine, L-leucine, glucose, fructose, myo-inositol, citric acid and 2, 3-hydroxypropanoic acid).Two QTL mapping approaches were carried out using SNP markers on about half of the population only and an imputation approach using SNP and DArT markers on the entire population. The imputation approach confirmed the four QTLs found in the SNP-only analysis and identified a further seven QTLs.

Conclusions

These results highlight the potential of utilising molecular assisted breeding in perennial ryegrass to modulate a range of biochemical quality traits with downstream effects in livestock productivity and ruminal digestion.

Electronic supplementary material

The online version of this article (10.1186/s12863-017-0552-0) contains supplementary material, which is available to authorized users.

Markers associated with heading and aftermath heading in perennial ryegrass full-sib families

BACKGROUND

Heading and aftermath heading are important traits in perennial ryegrass because they impact forage quality. So far, genome-wide association analyses in this major forage species have only identified a small number of genetic variants associated with heading date that overall explained little of the variation. Some possible reasons include rare alleles with large phenotypic affects, allelic heterogeneity, or insufficient marker density. We established a genome-wide association panel with multiple genotypes from multiple full-sib families. This ensured alleles were present at the frequency needed to have sufficient statistical power to identify associations. We genotyped the panel via partial genome sequencing and performed genome-wide association analyses with multi-year phenotype data collected for heading date, and aftermath heading.

RESULTS

Genome wide association using a mixed linear model failed to identify any variants significantly associated with heading date or aftermath heading. Our failure to identify associations for these traits is likely due to the extremely low linkage disequilibrium we observed in this population. However, using single marker analysis within each full-sib family we could identify markers and genomic regions associated with heading and aftermath heading. Using the ryegrass genome we identified putative orthologs of key heading genes, some of which were located in regions of marker-trait associations.

CONCLUSION

Given the very low levels of LD, genome wide association studies in perennial ryegrass populations are going to require very high SNP densities. Single marker analysis within full-sibs enabled us to identify significant marker-trait associations. One of these markers anchored proximal to a putative ortholog of TFL1, homologues of which have been shown to play a key role in continuous heading of some members of the rose family, Rosaceae.

An ultra-high density genetic linkage map of perennial ryegrass (Lolium perenne) using genotyping by sequencing (GBS) based on a reference shotgun genome assembly

BACKGROUND AND AIMS

High density genetic linkage maps that are extensively anchored to assembled genome sequences of the organism in question are extremely useful in gene discovery. To facilitate this process in perennial ryegrass (Lolium perenne L.), a high density single nucleotide polymorphism (SNP)- and presence/absence variant (PAV)-based genetic linkage map has been developed in an F2 mapping population that has been used as a reference population in numerous studies. To provide a reference sequence to which to align genotyping by sequencing (GBS) reads, a shotgun assembly of one of the grandparents of the population, a tenth-generation inbred line, was created using Illumina-based sequencing.

METHODS

The assembly was based on paired-end Illumina reads, scaffolded by mate pair and long jumping distance reads in the range of 3-40 kb, with >200-fold initial genome coverage. A total of 169 individuals from an F2 mapping population were used to construct PstI-based GBS libraries tagged with unique 4-9 nucleotide barcodes, resulting in 284 million reads, with approx. 1·6 million reads per individual. A bioinformatics pipeline was employed to identify both SNPs and PAVs. A core genetic map was generated using high confidence SNPs, to which lower confidence SNPs and PAVs were subsequently fitted in a straightforward binning approach.

KEY RESULTS

The assembly comprises 424 750 scaffolds, covering 1·11 Gbp of the 2·5 Gbp perennial ryegrass genome, with a scaffold N50 of 25 212 bp and a contig N50 of 3790 bp. It is available for download, and access to a genome browser has been provided. Comparison of the assembly with available transcript and gene model data sets for perennial ryegrass indicates that approx. 570 Mbp of the gene-rich portion of the genome has been captured. An ultra-high density genetic linkage map with 3092 SNPs and 7260 PAVs was developed, anchoring just over 200 Mb of the reference assembly.

CONCLUSIONS

The combined genetic map and assembly, combined with another recently released genome assembly, represent a significant resource for the perennial ryegrass genetics community.

Combined MEG-EEG source localisation in patients with sub-acute sclerosing pan-encephalitis

To study the genesis and propagation patterns of periodic complexes (PCs) associated with myoclonic jerks in sub-acute sclerosing pan-encephalitis (SSPE) using magnetoencephalography (MEG) and electroencephalography (EEG). Simultaneous recording of MEG (306 channels) and EEG (64 channels) in five patients of SSPE (M:F = 3:2; age 10.8 ± 3.2 years; symptom-duration 6.2 ± 10 months) was carried out using Elekta Neuromag(®) TRIUX™ system. Qualitative analysis of 80-160 PCs per patient was performed. Ten isomorphic classical PCs with significant field topography per patient were analysed at the 'onset' and at 'earliest significant peak' of the burst using discrete and distributed source imaging methods. MEG background was asymmetrical in 2 and slow in 3 patients. Complexes were periodic (3) or quasi-periodic (2), occurring every 4-16 s and varied in morphology among patients. Mean source localization at onset of bursts using discrete and distributed source imaging in magnetic source imaging (MSI) was in thalami and or insula (50 and 50 %, respectively) and in electric source imaging (ESI) was also in thalami and or insula (38 and 46 %, respectively). Mean source localization at the earliest rising phase of peak in MSI was in peri-central gyrus (49 and 42 %) and in ESI it was in frontal cortex (52 and 56 %). Further analysis revealed that PCs were generated in thalami and or insula and thereafter propagated to anterolateral surface of the cortices (viz. sensori-motor cortex and frontal cortex) to same side as that of the onset. This novel MEG-EEG based case series of PCs provides newer insights for understanding the plausible generators of myoclonus in SSPE and patterns of their propagation.

Evaluating the image quality of cone beam CT acquired during rotational delivery

OBJECTIVE

The aim of this work was to evaluate the quality of kilovoltage (kV) cone beam CT (CBCT) images acquired during arc delivery.

METHODS

Arc plans were delivered on a Catphan(®) 600 phantom (The Phantom Laboratory Inc., Salem, NY), and kV CBCT images were acquired during the treatment. The megavoltage (MV) scatter effect on kV CBCT image quality was evaluated using parameters such as Hounsfield unit (HU) accuracy, spatial resolution, contrast-to-noise ratio (CNR) and spatial non-uniformity (SNU). These CBCT images were compared with reference scans acquired with the same acquisition parameters without MV "beam on". This evaluation was carried out for different photon beams (6 and 15 MV), arc types (half vs full arc), static field sizes (10 × 10 and 25 × 25 cm(2)) and source-to-imager distances (SID) (150 and 170 cm).

RESULTS AND CONCLUSION

HU accuracy, CNR and SNU were considerably affected by MV scatter, and this effect was increased with increasing field size and decreasing photon energy, whereas the spatial resolution was almost unchanged. The MV scatter effect was observed to be more for full-rotation arc delivery than for half-arc delivery. In addition, increasing the SID resulted in decreased MV scatter effect and improved the image quality.

ADVANCES IN KNOWLEDGE

Nowadays, volumetric modulated arc therapy (VMAT) is increasingly used in clinics, and this arc therapy enables us to acquire CBCT imaging simultaneously. But, the main issue of concurrent imaging is the "MV scatter" effect on CBCT imaging. This study aims to experimentally quantify the effect of MV scatter on CBCT image quality.

Scanning electrochemical microscopy as a novel proximity sensor for atraumatic cochlear implant insertion

A growing number of minimally invasive surgical and diagnostic procedures require the insertion of an optical, mechanical, or electronic device in narrow spaces inside a human body. In such procedures, precise motion control is essential to avoid damage to the patient's tissues and/or the device itself. A typical example is the insertion of a cochlear implant which should ideally be done with minimum physical contact between the moving device and the cochlear canal walls or the basilar membrane. Because optical monitoring is not possible, alternative techniques for sub millimeter-scale distance control can be very useful for such procedures. The first requirement for distance control is distance sensing. We developed a novel approach to distance sensing based on the principles of scanning electrochemical microscopy (SECM). The SECM signal, i.e., the diffusion current to a microelectrode, is very sensitive to the distance between the probe surface and any electrically insulating object present in its proximity. With several amperometric microprobes fabricated on the surface of an insertable device, one can monitor the distances between different parts of the moving implant and the surrounding tissues. Unlike typical SECM experiments, in which a disk-shaped tip approaches a relatively smooth sample, complex geometries of the mobile device and its surroundings make distance sensing challenging. Additional issues include the possibility of electrode surface contamination in biological fluids and the requirement for a biologically compatible redox mediator.

A study on comparison of Gafchromic EBT2 film response under single and cumulative exposure conditions

Gafchromic films are used as dosimeter for in vivo and in phantom dose measurements. The dose response of Gafchromic EBT2 film under single and repeated exposure conditions is compared in this study to analyze the usability of Gafchromic EBT2 films in cumulative dose measurements. The post-irradiation change in response of the film is studied for up to 4 days after irradiation. The effect of repeated exposure to scanner light on the response of the film is also studied. To check usability of Gafchromic EBT2 films in cumulative dose measurements, three EBT2 films were exposed to a daily fraction dose of 100 cGy, 150 cGy and 200 cGy, respectively, for 4 days. The dose response of the films exposed to cumulative irradiation was compared with the dose measured from films exposed to the same dose but in a single exposure. It is observed that the post-irradiation darkening of the film does not saturate and continue to take place even 4 days after irradiation. The dose measured from the EBT2 films after 4 days from irradiation was around 2% higher than the dose measured from the same films at 24 hours post-irradiation. It was also observed that the repeated exposure to scanner light does not produce any significant change in the film response. The dose response of films exposed to cumulative irradiation agrees with the dose response of films exposed to the same dose in a single irradiation with less than 3% difference. Gafchromic EBT2 films can be used to measure the cumulative dose delivered over multiple fractions, when the delivered dose is uniform across the film.

Comparative analysis between 5 mm and 7.5 mm collimators in CyberKnife radiosurgery for trigeminal neuralgia

Trigeminal neuralgia (TN) is treated in CyberKnife (Accuray Inc, Sunnyvale, USA) with the 5 mm collimator whose dosimetric inaccuracy is higher than the other available collimators. The 7.5 mm collimator which is having less dosimetric uncertainty can be an alternative for 5 mm collimator provided the dose distribution with 7.5 mm collimator is acceptable. Aim of this study is to analyze the role of 7.5 mm collimator in CyberKnife treatment plans of TN. The treatment plans with 5 mm collimators were re-optimized with 7.5 mm collimator and a bi-collimator system (5 mm and 7.5 mm). The treatment plans were compared for target coverage, brainstem doses, and the dose to normal tissues. The target and brainstem doses were comparable. However, the conformity indices were 2.31 ± 0.52, 2.40 ± 0.87 and 2.82 ± 0.51 for 5 mm, bi-collimator (5mm and 7.5 mm), 7.5 mm collimator plans respectively. This shows the level of dose spillage in 7.5 mm collimator plans. The 6 Gy dose volumes in 7.5 mm plans were 1.53 and 1.34 times higher than the 5 mm plan and the bi-collimator plans respectively. The treatment time parameters were lesser for 7.5 mm collimators. Since, the normal tissue dose is pretty high in 7.5 mm collimator plans, the use of it in TN plans can be ruled out though the treatment time is lesser for these 7.5 mm collimator plans.

A study on rectal dose measurement in phantom and in vivo using Gafchromic EBT3 film in IMRT and CyberKnife treatments of carcinoma of prostate

The objective of this study is to check the feasibility of in vivo rectal dose measurement in intensity-modulated radiotherapy (IMRT) and CyberKnife treatments for carcinoma prostate. An in-house pelvis phantom made with bee's wax was used in this study. Two cylindrical bone equivalent materials were used to simulate the femur. Target and other critical structures associated with carcinoma prostate were delineated on the treatment planning images by the radiation oncologist. IMRT treatment plan was generated in Oncentra Master Plan treatment planning system and CyberKnife treatment plan was generated in Multiplan treatment planning system. Dose measurements were carried out in phantom and in patient using Gafchromic EBT3 films. RIT software was used to analyze the dose measured by EBT3 films. The measured doses using EBT3 films were compared with the TPS-calculated dose along the anterior rectal wall at multiple points. From the in-phantom measurements, it is observed that the difference between calculated and measured dose was mostly within 5%, except for a few measurement points. The difference between calculated and measured dose in the in-patient measurements was higher than 5% in regions which were away from the target. Gafchromic EBT3 film is a suitable detector for in vivo rectal dose measurements as it offers the possibility of analyzing the dose at multiple points. In addition, the method of extending this in vivo rectal dose measurement technique as a tool for patient-specific quality assurance check is also analyzed.

Analysis of high-dose rate brachytherapy dose distribution resemblance in CyberKnife hypofractionated treatment plans of localized prostate cancer

The present study is to analyze the CyberKnife hypofractionated dose distribution of localized prostate cancer in terms of high-dose rate (HDR) brachytherapy equivalent doses to assess the degree of HDR brachytherapy resemblance of CyberKnife dose distribution. Thirteen randomly selected localized prostate cancer cases treated using CyberKnife with a dose regimen of 36.25Gy in 5 fractions were considered. HDR equivalent doses were calculated for 30Gy in 3 fractions of HDR brachytherapy regimen. The D5% of the target in the CyberKnife hypofractionation was 41.57 ± 2.41Gy. The corresponding HDR fractionation (3 fractions) equivalent dose was 32.81 ± 1.86Gy. The mean HDR fractionation equivalent dose, D98%, was 27.93 ± 0.84Gy. The V100% of the prostate target was 95.57% ± 3.47%. The V100% of the bladder and the rectum were 717.16 and 79.6mm(3), respectively. Analysis of the HDR equivalent dose of CyberKnife dose distribution indicates a comparable resemblance to HDR dose distribution in the peripheral target doses (D98% to D80%) reported in the literature. However, there is a substantial difference observed in the core high-dose regions especially in D10% and D5%. The dose fall-off within the OAR is also superior in reported HDR dose distribution than the HDR equivalent doses of CyberKnife.

Patient dose analysis in total body irradiation through in vivo dosimetry

Total body irradiation (TBI) is a special radiotherapy technique, administered prior to bone marrow transplantation. Due to the complex nature of the treatment setup, in vivo dosimetry for TBI is mandatory to ensure proper delivery of the intended radiation dose throughout the body. Lithium fluoride (LiF) TLD-100 chips are used for the TBI in vivo dosimetry. Results obtained from the in vivo dosimetry of 20 patients are analyzed. Results obtained from forehead, abdomen, pelvis, and mediastinum showed a similar pattern with the average measured dose from 96 to 97% of the prescription dose. Extremities and chest received a dose greater than the prescription dose in many instances (more than 20% of measurements). Homogeneous dose delivery to the whole body is checked by calculating the mean dose with standard deviation for each fraction. Reasons for the difference between prescription dose and measured dose for each site are discussed. Dose homogeneity within ±10% is achieved using our in-house TBI protocol.

Influence of smoothing algorithms in Monte Carlo dose calculations of cyberknife treatment plans: a lung phantom study

AIM

The Monte Carlo dose calculation algorithm yields accurate dose distributions in heterogeneous media and interfaces. The Monte Carlo calculation algorithm provided in the Multiplan Cyberknife treatment planning system (Accuray, Sunnyvale, CA, USA) has five different dose-smoothing algorithms in it. As the principle of smoothing of these algorithms is different, they can produce a disparity in the final dose distribution. The aim of the present study is to analyze the influence of these Monte Carlo smoothing algorithms in the final dose distribution of cyberknife treatment plans.

MATERIALS AND METHODS

An anthropomorphic lung phantom with a tumor mimicking ball target was taken for this study. The basic optimization was performed with the Ray tracing algorithm. The Monte Carlo calculations were introduced with each smoothing algorithm on the basic plan and the plans were compared.

RESULTS

The Monte Carlo doses were found to be lesser than the Ray tracing doses. The dose conformity index was above 4 for all the smoothing algorithms, while it was only 1.19 for Ray tracing. The least coverage of 6.34 was obtained for a weighted average algorithm. The deviation between the V100% values of different smoothing algorithms was higher than the deviation in V80%.

CONCLUSION

The deviations between the smoothing algorithms are higher in the high-dose regions, including the prescribing isodose, than the low-dose regions of the target, as well as in the organs at risk (OAR).

Equivalent normalized total dose estimates in cyberknife radiotherapy dose delivery in prostate cancer hypofractionation regimens

As the α/β value of prostate is very small and lower than the surrounding critical organs, hypofractionated radiotherapy became a vital mode of treatment of prostate cancer. Cyberknife (Accuray Inc., Sunnyvale, CA, USA) treatment for localized prostate cancer is performed in hypofractionated dose regimen alone. Effective dose escalation in the hypofractionated regimen can be estimated if the corresponding conventional 2 Gy per fraction equivalent normalized total dose (NTD) distribution is known. The present study aims to analyze the hypofractionated dose distribution of localized prostate cancer in terms of equivalent NTD. Randomly selected 12 localized prostate cases treated in cyberknife with a dose regimen of 36.25 Gy in 5 fractions were considered. The 2 Gy per fraction equivalent NTDs were calculated using the formula derived from the linear quadratic (LQ) model. Dose distributions were analyzed with the corresponding NTDs. The conformity index for the prescribed target dose of 36.25 Gy equivalent to the NTD dose of 90.63 Gy (α/β = 1.5) or 74.31 Gy (α/β = 3) was ranging between 1.15 and 1.73 with a mean value of 1.32 ± 0.15. The D5% of the target was 111.41 ± 8.66 Gy for α/β = 1.5 and 90.15 ± 6.57 Gy for α/β = 3. Similarly, the D95% was 91.98 ± 3.77 Gy for α/β = 1.5 and 75.35 ± 2.88 Gy for α/β = 3. The mean values of bladder and rectal volume receiving the prescribed dose of 36.25 Gy were 0.83 cm3 and 0.086 cm3, respectively. NTD dose analysis shows an escalated dose distribution within the target for low α/β (1.5 Gy) with reasonable sparing of organs at risk. However, the higher α/β of prostate (3 Gy) is not encouraging the fact of dose escalation in cyberknife hypofractionated dose regimen of localized prostate cancer.

Dose linearity and monitor unit stability of a G4 type cyberknife robotic stereotactic radiosurgery system

Dose linearity studies on conventional linear accelerators show a linearity error at low monitor units (MUs). The purpose of this study was to establish the dose linearity and MU stability characteristics of a cyberknife (Accuray Inc., USA) stereotactic radiosurgery system. Measurements were done at a depth of 5 cm in a stereotactic dose verification phantom with a source to surface distance of 75 cm in a Generation 4 (G4) type cyberknife system. All the 12 fixed-type collimators starting from 5 to 60 mm were used for the dose linearity study. The dose linearity was examined in small (1–10), medium (15–100) and large (125–1000) MU ranges. The MU stability test was performed with 60 mm collimator for 10 MU and 20 MU with different combinations. The maximum dose linearity error of –38.8% was observed for 1 MU with 5 mm collimator. Dose linearity error in the small MU range was considerably higher than in the medium and large MU ranges. The maximum error in the medium range was –2.4%. In the large MU range, the linearity error varied between –0.7% and 1.2%. The maximum deviation in the MU stability was –3.03%.

Dosimetric analysis of trigeminal nerve, brain stem doses in CyberKnife radiosurgery of trigeminal neuralgia

CyberKnife radiosurgery treatment of Trigeminal neuralgia (TN) is performed as a non-invasive image guided procedure. The prescription dose for TN is very high. The brainstem is the adjacent critical organ at risk (OAR) which is prone to receive the very high target dose of TN. The present study is to analyze the dose distribution inside the tiny trigeminal nerve target and also to analyze the dose fall off in the brain stem. Seven TN cases treated between November 2010 and January 2012 were taken for this study retrospectively. The treatment plans were analyzed for target dose conformity, homogeneity and dose coverage. In the brainstem the volume doses D(1%), D(2%) were taken for analyzing the higher doses in the brain stem. The dose fall off was analyzed in terms of D(5%) and D(10%). The mean value of maximum dose within the trigeminal nerve target was 73.5±2.1Gy (P=0.0007) and the minimum dose was 50.0±4.1Gy (P=0.1315). The mean conformity index was 2.19 and the probable reason could be the smallest CyberKnife collimator of 5mm used in the treatment plan. The mean D(1%), of the brainstem was 10.5± 2.1Gy (P=0.5316) and the mean value of the maximum point dose within the brainstem was 35.6±3.8Gy. This shows the degree of dose fall off within the brainstem. Though the results of the present study are showing superior sparing of brain stem and reasonable of target coverage, it is necessary to execute the treatment plan with greater accuracy in CyberKnife as the immobilization is noninvasive and frameless.

Different intensity extension methods and their impact on entrance dose in breast radiotherapy: A study

In breast radiotherapy, skin flashing of treatment fields is important to account for intrafraction movements and setup errors. This study compares the two different intensity extension methods, namely, Virtual Bolus method and skin flash tool method, to provide skin flashing in intensity modulated treatment fields. The impact of these two different intensity extension methods on skin dose was studied by measuring the entrance dose of the treatment fields using semiconductor diode detectors. We found no significant difference in entrance dose due to different methods used for intensity extension. However, in the skin flash tool method, selection of appropriate parameters is important to get optimum fluence extension.

Evaluation of gafchromic EBT film for intensity modulated radiation therapy dose distribution verification

This work was undertaken with the intention of investigating the possibility of clinical use of commercially available self-developing radiochromic film – Gafchromic EBT film – for IMRT dose verification. The dose response curves were generated for the films using VXR-16 film scanner. The results obtained with EBT films were compared with the results of Kodak EDR2 films. It was found that the EBT film has a linear response between the dose ranges of 0 and 600 cGy. The dose-related characteristics of the EBT film, like post-irradiation color growth with time, film uniformity and effect of scanning orientation, were studied. There is up to 8.6% increase in the color density between 2 and 40 h after irradiation. There was a considerable variation, up to 8.5%, in the film uniformity over its sensitive region. The quantitative difference between calculated and measured dose distributions was analyzed using Gamma index with the tolerance of 3% dose difference and 3 mm distance agreement. EDR2 films showed good and consistent results with the calculated dose distribution, whereas the results obtained using EBT were inconsistent. The variation in the film uniformity limits the use of EBT film for conventional large field IMRT verification. For IMRT of smaller field size (4.5 × 4.5 cm), the results obtained with EBT were comparable with results of EDR2 films.

Comparison of Kodak EDR2 and Gafchromic EBT film for intensity-modulated radiation therapy dose distribution verification

The quantitative dose validation of intensity-modulated radiation therapy (IMRT) plans require 2-dimensional (2D) high-resolution dosimetry systems with uniform response over its sensitive region. The present work deals with clinical use of commercially available self-developing Radio Chromic Film, Gafchromic EBT film, for IMRT dose verification. Dose response curves were generated for the films using a VXR-16 film scanner. The results obtained with EBT films were compared with the results of Kodak extended dose range 2 (EDR2) films. The EBT film had a linear response between the dose range of 0 to 600 cGy. The dose-related characteristics of the EBT film, such as post irradiation color growth with time, film uniformity, and effect of scanning orientation, were studied. There was up to 8.6% increase in the color density between 2 to 40 hours after irradiation. There was a considerable variation, up to 8.5%, in the film uniformity over its sensitive region. The quantitative differences between calculated and measured dose distributions were analyzed using DTA and Gamma index with the tolerance of 3% dose difference and 3-mm distance agreement. The EDR2 films showed consistent results with the calculated dose distributions, whereas the results obtained using EBT were inconsistent. The variation in the film uniformity limits the use of EBT film for conventional large-field IMRT verification. For IMRT of smaller field sizes (4.5 x 4.5 cm), the results obtained with EBT were comparable with results of EDR2 films.

Prognostic factors for spinal cord myelitis--an analysis of compiled literature data

The effectiveness of radiotherapy in the treatment of malignant tumors in the head and neck, thorasic and upper abdominal regions is frequently limited by the tolerance of the spinal cord. Therefore knowledge of the factors that influence the tolerance of the spinal cord to radiation is of the upmost important. Safe limits for irradiation of the spinal cord determined in a number of clinical studies is on the conservative side from the point of view of tumor control probability. The bioeffect of a physical dose takes into account the treatment variables and the radiobiological characteristics of the relevant tissue; hence deciding spinal cord tolerance on the basis of bioeffect models would be better approach. The aim of the present study was to analyze the relationship of the prognostic factors with percentage incidence of spinal cord myelitis and to arrive at a spinal cord tolerance bioeffect dose TDF and ERD for optimum incidence of radiation myelitis.