Preface to the Special Issue 'Heavy Metals in Mushrooms'

Population growth, intensive industrialization and urbanization have led to environmental pollution, especially soil and water pollution [...].

Lignin Nanoparticles with Entrapped Thymus spp. Essential Oils for the Control of Wood-Rot Fungi

After decades of utilization of fossil-based and environmentally hazardous compounds for wood preservation against fungal attack, there is a strong need to substitute those compounds with bio-based bioactive solutions, such as essential oils. In this work, lignin nanoparticles containing four essential oils from thyme species (Thymus capitatus, Coridothymus capitatus, T. vulgaris, and T. vulgaris Demeter) were applied as biocides in in vitro experiments to test their anti-fungal effect against two white-rot fungi (Trametes versicolor and Pleurotus ostreatus) and two brown-rot fungi (Poria monticola and Gloeophyllum trabeum). Entrapment of essential oils provided a delayed release over a time frame of 7 days from the lignin carrier matrix and resulted in lower minimum inhibitory concentrations of the essential oils against the brown-rot fungi (0.30-0.60 mg/mL), while for the white-rot fungi, identical concentrations were determined compared with free essential oils (0.05-0.30 mg/mL). Fourier Transform infrared (FTIR) spectroscopy was used to assess the fungal cell wall changes in the presence of essential oils in the growth medium. The results regarding brown-rot fungi present a promising approach for a more effective and sustainable utilization of essential oils against this class of wood-rot fungi. In the case of white-rot fungi, lignin nanoparticles, as essential oils delivery vehicles, still need optimization in their efficacy.

Cellulose Nano Crystals (CNC) as Additive for a Bio-Based Waterborne Acrylic Wood Coating: Decay, Artificial Weathering, Physical and Chemical Tests

Wood coatings prolong the service life of wood-based products, but they are usually of synthetic origin. The aim of the present article is to reduce the fossil-based compounds in a commercial waterborne acrylic coating by CNC addition and to test its performance. The coatings were applied on European beech and Norway spruce wood in order to test durability against Gloeophyllum trabeum (brown wood rot) and Trametes versicolor (white wood rot). Artificial weathering and blue stain, contact angle, physical tests (adhesion, impact and scratch test), chemical (FTIR) and morpho-anatomical analysis (SEM) were carried out. CNC addition increased viscosity, limiting the spreading of the coating into wood pores as visible after SEM observation, which reduced coating adhesion on the substrate. CNC improved fungal resistance as seen by a reduced mass loss and FTIR spectroscopy thanks to crosslinks formation, which reduced water sorption as well. Color change was not significant, and, on the other hand, glossiness was reduced but resulted as more homogeneous than control. CNC addition gave good results also in blue stain protection. CNC improved scratch resistance, but no visible change to impact was registered. CNC has promising results in coatings depending on wood and fungal species and presence of further commercial additives (biocides).

Effects of the sludge physical-chemical properties on its microwave drying performance

Thermal drying is an effective sludge treatment method for dealing with large volumes of sludge. Microwave (MW) technology has been proposed as an effective and efficient technology for sludge drying. The physical-chemical properties of the sludge depend both on the origin of the sludge, as well as on the treatment process at which the sludge has been exposed. The physical-chemical properties of the sludge affect the performance and the subsequent valorisation and management of the sludge. This study evaluated the effect of certain physical-chemical properties of the sludge (moisture content, organic content, calorific value, porosity, hydrophobicity, and water-sludge molecular interaction, among others) on the MW sludge drying and energy performance. Four different types of sludge were evaluated collected from municipal wastewater treatment plants and septic tanks. The performance of the MW system was assessed by evaluating the sludge drying rates, exposure times, energy efficiencies and power input consumed by the MW system and linking the MW drying performance to the sludge physical-chemical properties. The results confirmed that MW drying substantially extends the constant drying period associated with unbound water evaporation, irrespective of the sludge sample evaluated. However, the duration and intensity were determined to depend on the dielectric properties of the sludge, particularly on the distribution of bound and free water. Sludge samples with a higher amount of free and loosely bound water absorbed and converted MW energy into heat more efficiently than sludge samples with a lower amount of free water. As a result, the sludge drying rates increased and the constant drying rate period prolonged; hence, leading to an increase in MW drying energy efficiency. The availability of free and loosely bound water molecules was favoured when hydrophobic compounds, e.g., oils and fats, were present in the sludge.

Occurrence and Health Risk Assessment of Cadmium Accumulation in Three Tricholoma Mushroom Species Collected from Wild Habitats of Central and Coastal Croatia

This study deals with the biomonitoring of cadmium (Cd) heavy metal in the three selected Tricholoma mushroom species collected from wild habitats of central and coastal Croatia. For this, mushroom (T. columbetta: n = 38, T. portentosum: n = 35, and T. terreum: n = 34) and surface soil samples were collected from nine forest localities of Croatia and analyzed for Cd concentration using inductively coupled plasma−optical emission spectrometry (ICP−OES) through the acid digestion method. The findings revealed that Cd was present in Tricholoma spp. and surface soil. However, the maximum mean Cd concentration (mg/kg dry weight) was recorded in T. portentosum (cap: 0.98; stipe: 0.72), followed by T. columbetta (cap: 0.96; stipe: 0.73) and T. terreum (cap: 0.81; stipe: 0.63). The bioconcentration factor (BCF) value (>1) revealed that the selected Tricholoma spp. had the potential for Cd accumulation. Moreover, the principal component (PC) and hierarchical cluster (HC) analyses were used to derive the interactions and similarities between Cd levels Tricholoma spp. and sampling localities. The multivariate analysis suggested that central sampling localities had higher Cd levels as compared to coastal localities. However, the daily intake of metals (DIM < 0.426) and health risk index (HRI < 1) showed that there was no potential health risk associated with the consumption of selected Tricholoma spp. The findings of this study are helpful to understand the Cd accumulation behavior of wild edible Tricholoma spp. collected from Croatia.

Durability and Moisture Dynamics of Douglas-Fir Wood From Slovenia

Wood in outdoor applications is subject to various decomposition factors. Wood degradation can be prevented by construction details, biocide protection of wood, wood modification or selection of naturally durable species. Unfortunately, most species in Europe do not have naturally durable wood. Imported tree species represent a new pool from which we can draw wood species with better natural durability and better resilience towards climate change. The performance of wood when used outdoors depends on the biologically active compounds (extractives) and the water exclusion efficacy. Considering decay, presence of biologically active compounds and water exclusion efficacy, we can estimate the density, modulus of elasticity, extractive content and resistance dose, which reflects the material properties of wood. Recently, the most commonly used model for this purpose is Meyer-Veltrup. Literature data indicate that the durability of the wood from native and new sites is not always comparable, so it is necessary to determine the resistance of non-native wood species from new sites. This paper presents original data on the wood's overall durability from American Douglas fir (Pseudotsuga menziesii) grown in Slovenia. Experimental data show that the mature heartwood of Douglas fir is more durable than the wood of European larch (Larix decidua). Durability can be attributed to good water exclusion efficacy and inherent durability. Inherent durability is primarily the result of the high content of extractives. Based on the results, it can be concluded that American Douglas fir grown in Central Europe has a high potential for outdoor use.

Waste streams in onion production: Bioactive compounds, quercetin and use of antimicrobial and antioxidative properties

Onion production generates abundant waste with high contents of bioactive compounds. These might have several beneficial functional properties for fortification of foods. To understand the variety and potential for further use, we examined various parts of the plants (edible/inedible waste/outer skin of onion), as well as extraction in water/ethanol and by shaking/sonication. Quercetin content and antioxidant capacity were initially determined for extracts of edible and waste parts of red, yellow and white onions, and red shallots. Ethanol extracts of the waste fraction had the highest quercetin content and antioxidant capacity. Except white onion, which contained no quercetin, the dried waste ethanol extracts contained up to 15 mg quercetin g^-1 and had an antioxidant capacity of nearly 40 mg Trolox equivalents g^-1. Furthermore, the dried skin ethanol extract of yellow onion, which is commercially the most available fraction, contained 8 mg quercetin g^-1, with antioxidant capacity of 25 mg Trolox equivalents g^-1 and high antimicrobial activity. Dried yellow onion skin showed good stability for the quercetin content under various storage conditions (4, 25, 37, 40 °C; dark/light; dry/moist air/in water). Bacteria, bacterial spores, yeast and mould counts remained unchanged for dried onion skin over 5 days under storage conditions that can promote food spoilage, indicating exceptional microbial stability. Finally, two different applications are demonstrated for dried yellow onion skin: tablets for home use (tablets as more convenient form of storage and for simple dosing in cooking), and a stabilisation additive (prolonged shelf-life of olive oil). Both represent efficient and straightforward approaches through waste prevention and food fortification.

Influence of Zwitterionic Buffer Effects with Thermal Modification Treatments of Wood on Symbiotic Protists in Reticulitermes grassei Clément

Simple Summary

Over the past thirty years, the thermal modification of wood has become a universally recognised and commercialised wood modification process. Thermal modifications may affect wood properties, either positively (dimensional stability and decay resistance) or negatively (mechanical properties). The combination of the impregnation of specific reagents with thermal modification may help to overcome the negative effects on wood properties. In this study, we evaluate the effect of a combination of two zwitterionic buffers, bicine and tricine, and thermal modification of two wood species (beech and spruce) against subterranean termites and their symbiotic fauna. Bicine and tricine treatments alone had a clear influence on wood mass loss and termite survival. The flagellate protist symbiotic community was affected by the treatments and responded differently to them, as a highly adaptable community. However, the combination of bicine with the thermal modification showed a negative effect on termites and their symbionts on both wood species. The combination of these different factors should be further investigated, as these results seem to be promising with regard to the enhancement of the termite resistance of wood.

Abstract

The majority of thermal modification processes are at temperatures greater than 180 °C, resulting in a product with some properties enhanced and some diminished (e.g., mechanical properties). However, the durability of thermally modified wood to termite attack is recognised as low. Recent attempts at combining thermal modification with chemical modification, either prior to or directly after the thermal process, are promising. Buffers, although not influencing the reaction systems, may interact on exposure to certain conditions, potentially acting as promoters of biological changes. In this study, two zwitterionic buffers, bicine and tricine, chosen for their potential to form Maillard-type products with fragmented hemicelluloses/volatiles, were assessed with and without thermal modification for two wood species (spruce and beech), with subsequent evaluation of their effect against subterranean termites (Reticulitermes grassei Clément) and their symbiotic protists. The effect of the wood treatments on termites and their symbionts was visible after four weeks, especially for spruce treated with tricine and bicine and heat treatment (bicine HT), and for beech treated with bicine and bicine and heat treatment (bicine HT). The chemical behaviour of these substances should be further investigated when in contact with wood and also after heat treatment. This is the first study evaluating the effect of potential Maillard reactions with zwitterionic buffers on subterranean termite symbiotic fauna.

Intra-annual dynamics of phloem formation and ultrastructural changes in sieve tubes in Fagus sylvatica

Despite increased interest in the timing and dynamics of phloem formation, seasonal changes in the structure of phloem sieve elements remain largely unexplored. To understand better the dynamics of phloem formation and the functioning of sieve tubes in the youngest phloem in Fagus sylvatica L., we investigated repeatedly taken phloem samples during the growing season of 2017 by means of light microscopy, and transmission and scanning electron microscopy. Phloem formation started with the expansion of the overwintered early phloem sieve tubes adjacent to the cambium and concurrent cambial cell production. The highest phloem growth rate was observed in general 1 week after the onset of cambial cell production, whereas the transition from early to late phloem occurred at the end of May. Cambial cell production ceased at the end of July. The final width of the phloem increment was 184 ± 10 μm, with an early phloem proportion of 59%. Collapse of older phloem tissue is a progressive process, which continuously occurred during the sampling period. Collapse of early phloem sieve tubes started shortly after the cessation of cambial cell production. Prior to the onset of radial growth, late phloem from the previous year represented 80% of the total non-collapsed part; during the growth period, this percentage decreased to 20%. Differences were observed in both sieve tube ultrastructure and sieve plate geometry between the youngest and older phloem. However, sieve plates were never completely occluded by callose, suggesting that processes affecting the functionality of sieve tubes may differ in the case of regular collapse or injury. The youngest parts of the phloem increment from the previous year (i.e., previous late phloem) continue functioning for some time in the current growing season, but the two-step development of overwintered phloem cells also ensures a sufficient translocation pathway for photosynthates to the actively growing tissues.

Quality assessment of recycled wood with and without non-wooden materials from selected recycling companies in Europe

Recycled wood is becoming an important material source for production of new materials and chemicals. Predominantly clean recycled wood should be used for the products with high added value. However, contamination of the recycled wood defines the potential end uses. Thus, it is of the huge commercial and environmental importance to monitor the contamination of the respective material. In the present research, we focused on concentrations of non-wooden materials in recycled wood and the presence of indicative inorganic pollutants, namely: chlorine (Cl), chromium (Cr), copper (Cu), zinc (Zn), lead (Pb), iron (Fe) and bromine (Br). Sampling of various qualities of commercially available recycled wood was performed for one year in recycling companies from Germany, Slovenia, Finland and UK. In addition to the above-mentioned long term monitoring, fraction analysis was also performed on selected batches. For nine different fractions, the water soluble part and lignin content were additionally determined. The results showed that high quality recycled wood had low shares of non-wooden materials and only a few samples exceeded the limit values for inorganic pollutants prescribed by German ordinance Altholzverordnung or EPF standard. On the other hand, mixed recycled wood, of lower quality contained a significantly higher portion of non-wooden material (up to 3%). These mixtures also had higher concentrations of inorganic pollutants. More than 85% of samples exceeded the limit concentration prescribed by the German ordinance Altholzverordnung for recovered wood for at least one of the analysed chemicals. The concentration of chemical elements in samples from nine different size fractions negatively correlated with the particle size in the fractions. The same trend was also observed for the soluble part and the lignin content. In general, it can be concluded that recycled wood deriving from larger annual process capacity volumes with sophisticated sorting systems, contains less non-wooden material and can provide clean wood. On the other hand, the mixed recycled wood contained high concentrations of inorganic elements, regardless of the origin or sorting system.

Heavy metal bioaccumulation by wild edible saprophytic and ectomycorrhizal mushrooms

Heavy metals cause serious problems in the environment, and they can be accumulated in organisms, especially in the higher fungi. The concentration of Ni, Cr, Pb, Cd, and Hg in 10 species of edible mushrooms in Medvednica Nature Park, Croatia was therefore determined. In addition, the similarity between the studied species was determined by cluster analysis based on concentrations of the aforementioned metals in the fruiting bodies. The contents of nickel, chromium, lead, cadmium, and mercury in the fruiting bodies of mushrooms were obtained by X-ray fluorescence spectrometry. The highest concentrations of Ni (3.62 mg kg(-1)), Cr (3.01 mg kg(-1)), and Cd (2.67 mg kg(-1)) were determined in Agaricus campestris. The highest concentration of Pb (1.67 mg kg(-1)) was determined in Macrolepiota procera, and the highest concentration of Hg (2.39 mg kg(-1)) was determined in Boletus edulis. The concentration of all heavy metals significantly differed (p < 0.001) between examined saprophytic and ectomycorrhizal mushrooms. Considering anatomical part of the fruiting body (cap-stipe), a considerably higher concentration of the analyzed elements was found in the cap for all mushroom species. According to calculated bioconcentration factors, all the examined species were found to be bioexclusors of Ni, Cr, and Pb and bioaccumulators of Cd and Hg. Cluster analysis performed on the basis of the accumulation of the studied metals revealed great phenotypic similarity of mushroom species belonging to the same genus and partial similarity of species of the same ecological affiliation.

Fixation of Copper(II) Ions in Aqueous Solution to Lignin Model Compound Vanillin in an Absence of the Nitrogen Donor Ligands; Structural and EPR Correlation

In order to elucidate the interactions of copper with wood, three mononuclear copper( II) coordination compounds with a vanillinate anion, cis-[Cu(C8H7O3)2(H2O)2] (1), trans- [Cu(C8H7O3)2(H2O)2]·2H2O (2), and trans-[Cu(C8H7O3)2(H2O)2] (3), have been characterized. X-ray structure analysis of the cis isomer 1 reveals two bidentate vanillinate ions coordinated via methoxy (Cu−O1 2.260(2) Å ) and deprotonated hydroxy oxygen atoms (Cu−O2 1.909(2) Å ), and two water molecules (Cu−O1w 2.087(2) Å ) in the octahedral CuO6 chromophore. Two axes O1−Cu−O1w’ in the octahedron have the same length, while the third axis O2−Cu−O2’ is shorter. This is in agreement with the room temperature EPR spectrum of 1, showing two signals (g12 2.302, g3 2.005), but interestingly, three signals (g1 2.393, g2 2.214, g3 2.010) in the 115 K spectrum were found. The same coordination atoms were found also in the trans isomer 2 (Cu−O2 1.950(2), Cu−O1w 1.994(2), Cu−O1 2.334(2) Å ), however here, two axes of almost equal length are short (O2−Cu−O2’ O1w−Cu−O1w’), while the third axis is longer (O1−Cu−O1’). On the other hand, three (rhombic) signals (g1 2.289, g2 2.163, g3 2.086) in the room temperature EPR spectrum of 2 suggest three different axes in the coordination octahedron. In the EPR spectrum, of the second trans complex 3, a slightly rhombically distorted elongated axial spectrum is found. The 115 K EPR spectra of the two trans complexes 2 and 3 do not differ significantly from the features observed at room temperature. These results indicate that there is not always a straightforward correlation between the results of XRD structure analysis and EPR spectroscopy. Nevertheless, both methods can act also complementarily and give a deeper insight into the nature of copper(II) chromophores.

Resonant transport of light from planar polymer waveguide into liquid-crystal microcavity

We demonstrate the resonant transfer of light from a planar waveguide to a nematic liquid-crystal microdroplet immersed in water. A wide spectrum of light from a supercontinuum laser source is coupled into a high-refractive-index polymer waveguide using a prism-film coupler. The waveguide is in contact with a water dispersion of droplets from the nematic liquid-crystal 5CB. The evanescent field of the light in the waveguide is resonantly coupled to the whispering-gallery mode resonances, sustained by 5 - 20 μm-sized nematic liquid-crystal droplets, which are in close proximity to the waveguide. The resonant transfer of light is tuned by the temperature-induced shifting of the WGM resonances due to the temperature dependence of the refractive index of the nematic liquid crystal. The measurements are compared to the calculations of the coupled-mode theory.

Influence of Pleurotus ostreatus inoculation on wood degradation and fungal colonization

The influence of Pleurotus ostreatus inoculation on wood degradation and on fungal community structure was studied. The experiments were performed on an organically poor fly ash deposit covered with a 10 cm layer of beech wood chips inoculated with P. ostreatus isolate ZIM76. Compared to non-inoculated wood chips, inoculation increased the temperatures and relative humidities and, in the first 6 months, accelerated Klason lignin degradation by 9% and also, after 17 months, increased iron translocation into wood chips by 30%. After 6 months, PCR-DGGE showed 22-28 and 13-21 fungal taxa in non-inoculated and P. ostreatus-inoculated beech chips, respectively. The differences in number of taxa and in the fungal community structure (based on Dice coefficient) between non-inoculated and inoculated wood chips diminished with time. The results indicate that the naturally occurring processes of wood degradation are as efficient as those occurring in sites inoculated with P. ostreatus.

Surfactant sensing based on whispering-gallery-mode lasing in liquid-crystal microdroplets

Lasing of whispering-gallery modes in nematic liquid-crystal microdroplets, floating in water, is demonstrated. It is shown that millimolar concentrations of sodium dodecyl sulfate in water effect the orientation of liquid-crystal molecules in the microdroplet, which changes the lasing spectrum. The presence of targeted molecules in water can be monitored by simply measuring and recognizing the spectrum of light, lasing from a small liquid-crystal droplet in water.

Direct and inverted nematic dispersions for soft matter photonics

General properties and recent developments in the field of nematic colloids and emulsions are discussed. The origin and nature of pair colloidal interactions in the nematic colloids are explained and an overview of the stable colloidal 2D crystalline structures and superstructures discovered so far is given. The nature and role of topological defects in the nematic colloids is discussed, with an emphasis on recently discovered entangled colloidal structures. Applications of inverted nematic emulsions and binding force mechanisms in nematic colloids for soft matter photonic devices are discussed.

3D microlasers from self-assembled cholesteric liquid-crystal microdroplets

We demonstrate a tunable and omnidirectional microlaser in the form of a microdroplet of a dye-doped, cholesteric liquid crystal in a carrier fluid. The cholesteric forms a Bragg-onion optical microcavity and the omnidirectional 3D lasing is due to the stimulated emission of light from the dye molecules in the liquid crystal. The lasing wavelength depends solely on the natural helical period of the cholesteric and can be tuned by varying the temperature. Millions of microlasers can be formed simply by mixing a liquid crystal, a laser dye and a carrier fluid, thus providing microlasers for soft-matter photonic devices.

Electrically tunable diffraction of light from 2D nematic colloidal crystals

We show that diffraction of visible light from 2D dipolar nematic colloidal crystals can be tuned electrically. When the external electric field of approximately 1 V/microm is applied in a direction perpendicular to the plane of the 2D colloidal crystal, the induced strain is highly anisotropic, and the inter-colloidal spacing changes by as much as 20% along one direction and approximately 2% along the perpendicular one. Although the speed of response is in the range of several seconds, this novel mechanism could provide interesting photonic applications.

Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi

There are increasing problems with regard to the disposal of treated wood waste. Due to heavy metals or arsenic in impregnated wood waste, burning and landfill disposal options are not considered to be environmentally friendly solutions for dealing with this problem. Extraction of the heavy metals and recycling of the preservatives from the wood waste is a much more promising and environmentally friendly solution. In order to study the scale up of this process, copper/chromium/boron-treated wood specimens were exposed to copper tolerant (Antrodia vaillantii and Leucogyrophana pinastri) and copper sensitive wood decay fungi (Gloeophyllum trabeum and Poria monticola). Afterwards, the ability of fungal hyphae to penetrate and overgrow the wood specimens was investigated. The fungal growths were stimulated by immersing the specimens into aqueous solution of glucose or corn steep liquor prior to exposure to the fungi. The fastest colonization of the impregnated wood was by the copper tolerant A. vaillantii. Addition of glucose onto the surface of the wood specimens increased the fungi colonization of the specimens; however, immersion of the specimens into the solution of corn steep liquor did not have the same positive influence. These results are important in elucidating copper toxicity in wood decay fungi and for using these fungi for bioremediation of treated wood wastes.

Influence of acidification of CCB (Cu/Cr/B) impregnated wood on fungal copper tolerance

Copper tolerant fungi are known for more than 60 years but the complete mechanisms of copper tolerance by these fungi are still not fully understood. Copper tolerance has previously been linked to oxalic acid excretion by copper tolerant brown rot fungi. The oxalic acid then reacts with copper in the wood to form an insoluble and therefore less toxic copper oxalate. It has been suggested that copper tolerance could be due to lowering of the pH of the medium rather than the low solubility of copper oxalate. In order to elucidate this presumption, copper/chromium/boron (CCB) treated wood specimens were acidified with organic (oxalic, acetic, lactic, formic) and inorganic (sulphuric) acids and exposed to copper tolerant (Antrodia vaillantii, Leucogyrophana pinastri) and copper sensitive (Poria monticola, Gloeophyllum trabeum) brown rot fungal strains according to the mini block procedure. After eight weeks of exposure, the wood specimens were isolated and their mass losses determined. Additionally, electron paramagnetic resonance (EPR) measurements on the exposed specimens were performed. The EPR spectra of the specimens decayed by A. vaillantii were very similar to the EPR spectra of the specimens acidified with oxalic acid. Additionally, acidification of the CCB impregnated specimens made them significantly more susceptible to decay by both the copper tolerant and copper sensitive brown rot fungi.

Lipopeptide adjuvants: monitoring and comparison of P3CSK4- and LPS-induced gene transcription

Bacteria-derived synthetic lipoproteins constitute potent macrophage activators in vivo and are effective stimuli, enhancing the immune response especially with respect to low or non-immunogenic compounds. N-palmitoyl-S-[2,3-bis(palmitoyloxy)-(2R,S)-propyl]-(R)-cysteinyl-seryl-(lysyl)3-lysine (P3CSK4), exhibiting one of the most effective lipopeptide derivatives, represents a highly efficient immunoadjuvant in parenteral, oral, nasal and genetic immunization either in combination with or after covalent linkage to antigen. In order to further elucidate its molecular mode of action with respect to the transcriptional level, we focused our investigations on the P3CSK4-induced modulation of gene transcription. We could show that P3CSK4 activates/represses an array of at least 140 genes partly involved in signal transduction and regulation of the immune response. P3CSK4 activates the expression of tumor suppressor protein p53 (p53), c-rel, inhibitor of nuclear factor kappa B (NFkappaB) alpha (IkappaB alpha), type 2 (inducible) nitric oxide (NO) synthase (iNOS), CD40-LR, intercellular adhesion molecule-1 (ICAM-1) and interleukin 1/6/15 (IL-1/6/15). We detected no activation of heat shock protein (HSP) 27, 60, 84 and 86, osmotic stress protein 94 (Osp 94), IL-12, extracellular signal-regulated protein kinase 1 (ERK1), p38 mitogen activated protein (MAP)-kinase (p38), c-Jun NH2-terminal kinase (JNK), signal transducer and activator of transcription 1 (STAT1), CD14 and caspase genes. Furthermore, we monitored inhibition of STAT6, Janus kinase 3 (Jak3) and cyclin D1/D3 gene transcription after stimulating bone marrow-derived macrophages (BMDM) with lipopeptide. In addition, we monitored significant differences after lipopeptide and lipopolysaccharide (LPS) stimulation of bone marrow-derived murine macrophages. Our findings are of importance for further optimizing both conventional and genetic immunization, and for the development of novel synthetic vaccines.

Effect of nitric oxide on shock-induced hepatic heme oxygenase-1 expression in the rat

Recent evidence suggests that the hepatic expression of heme oxygenase-1 (HO-1) may preserve hepatocellular integrity after hemorrhagic shock and resuscitation (HR). Because nitric oxide (NO) has been shown to modulate HO-1 expression in cultured cells in vitro, we determined its potential role in the regulation of HO-1 expression after HR in the rat liver in vivo. HO-1 mRNA and protein were highly induced and HO enzyme activity was higher after HR when compared with time-matched sham controls. Administration of the NO donor, molsidomine (MOL) (3 mg. kg(-1)), during resuscitation attenuated the accumulation of HO-1 mRNA and protein and the rise in HO activity. In addition, MOL prevented the shock-induced increase in DNA binding activity of the transcription factor, activator protein-1 (AP-1), but did not alter the activity of nuclear factor-erythroid 2 related factor (Nrf-2), nuclear transcription factor-kappaB (NF-kappaB), and hypoxia-inducible factor-1 (HIF-1). The suppressing action of MOL was not confined to HO-1, because the hepatic expression of the 70-kd major heat shock protein (HSP) in response to HR was also diminished. Moreover, MOL prevented the HR-induced increase in the serum activity of alanine transaminase (ALT) and alpha-glutathione-S-transferase (alpha-GST) that could otherwise be observed after HR. In contrast, the NO synthase inhibitor, N(omega)-nitro-L-arginine methyl ester (L-NAME) (1 mg.kg(-1)), had either no or only minor effects on the primary experimental endpoints. These findings would be consistent with a reduction of shock-induced liver damage by exogenous NO, which in turn prevents the subsequent activation of injury-sensitive transcription factors, thus attenuating the expression of stress-inducible proteins such as HO-1.

Immunostimulation by bacterial components: I. Activation Of macrophages and enhancement of genetic immunization by the lipopeptide P3CSK4

Synthetic lipopeptides derived from the N-terminus of bacterial lipoprotein constitute potent macrophage activators and polyclonal B-lymphocyte stimulators. They are also efficient immunoadjuvants in parenteral, oral and nasal immunization either in combination with or after covalent linkage to an antigen. Here we show how alterations in the molecular structure influence their biological properties indicating P3CSK4 as one of the most active members of a lipopentapeptide fatty acid library. This compound resulted in a most pronounced macrophage stimulation as indicated by NO release, activation of NFkappaB translocation, and enhancement of tyrosine protein phosphorylation. Furthermore, P3CSK4 activates/represses an array of at least 140 genes partly involved in signal transduction and regulation of the immune response. Finally we have evidence that P3CSK4 constitutes an effective adjuvant for DNA immunizations, especially increasing weak humoral immune responses. Our findings are of importance for further optimizing both conventional and genetic immunization, and for the development of novel synthetic vaccines.

Prolactin and interleukin-2 receptors in T lymphocytes signal through a MGF-STAT5-like transcription factor

The cell surface receptors for PRL and interleukin-2 (IL-2) are structurally distinct, but share regulatory tasks in T lymphocytes. They can stimulate proliferation and activate transcription of over-lapping sets of genes of T cells. PRL and IL-2 receptor activation are both linked to the Jak/Stat (signal transducer and activator of transcription) pathway. We investigated the ability of PRL and IL-2 to activate Stat proteins in different T cell lines. The DNA binding specificities, the reactivities toward Stat-specific antisera, and the mol wt of IL-2- and PRL-induced DNA-binding proteins in Nb2 and C196 T cell lines were investigated. A comparison with the Stat proteins induced by interferon-gamma, PRL, and IL-6 in T47D mammary tumor cells was made. We found that these parameters were indistinguishable for one of the PRL- and IL-2-induced factors. A transcription factor closely related to mammary gland factor-Stat5 is rapidly activated upon interaction of IL-2 and PRL with their respective receptors. Activation of a second protein related to Stat1 was also observed. Our results emphasize the role of PRL as a regulator of the immune response and indicate that the Stat factors mammary gland factor-Stat5 and Stat1 play a role in the regulation of gene expression during T cell development.

The effect of papaine on the time course of the end-plate current

Papaine is known to detach cholinesterases from the synaptic cleft. It could be expected that this would result in an increase of the amplitude and half-time of the end-plate current. Thus, the effect of papaine on the end-plate current. Thus, the effect of papaine on the end-plate current should be similar to the effect of anticholinesterase methanesulfonylfluoride. The end-plate current was recorded in frog skeletal muscle at various levels of membrane potential, before and after papaine was added to the bath. The effect of papaine was an increase of the half-time of the end-plate current, similarly as after treatment of the muscle by methanesulfonylfluoride. It seems that both papaine and methanesulfonylfluoride have a similar mechanism of action. In either experimental condition hydrolysis of transmitter is decreased or abolished, which results in an increase of the half-time of the end-plate current.