Observation of the same asbestos body by both phase contrast microscope and analytical transmission electron microscope

The amount of asbestos body (AB) in the human lungs is used as an index to assess asbestos lung cancer (ALC). This study reports a new method to observe the same AB previously observed by analytical transmission electron microscope (ATEM) by phase contrast microscope (PCM) or the contrary order. Four kinds of specimens were prepared from the lung tissue of an asbestos related worker: ordinary PCM specimen (A); PCM specimen (B) of which the cover glass was stripped off and ashed at a low temperature; transmission electron microscope (TEM) specimen (C); and PCM specimen (D) covered a TEM specimen (C) with immersion liquid and cover glass. These specimens were all observed by PCM, and the specimen (C) by analytical TEM (ATEM). The results showed that the TEM specimen (C) is transparent in visible light and we can also see the particles by PCM. The image by PCM of the TEM specimen (C) showed very similar features to that of PCM specimens (A) and (B). Accordingly, we could observe various same particles by both ATEM and PCM. In conclusion, the method observing the same AB by both PCM and ATEM will contribute to standardize the recognition of AB for PCM analysts.

Asbestos conceives Fe(II)-dependent mutagenic stromal milieu through ceaseless macrophage ferroptosis and β-catenin induction in mesothelium

Asbestos is still a social burden worldwide as a carcinogen causing malignant mesothelioma. Whereas recent studies suggest that local iron reduction is a preventive strategy against carcinogenesis, little is known regarding the cellular and molecular mechanisms surrounding excess iron. Here by differentially using high-risk and low-risk asbestos fibers (crocidolite and anthophyllite, respectively), we identified asbestos-induced mutagenic milieu for mesothelial cells. Rat and cell experiments revealed that phagocytosis of asbestos by macrophages results in their distinctive necrotic death; initially lysosome-depenent cell death and later ferroptosis, which increase intra- and extra-cellular catalytic Fe(II). DNA damage in mesothelial cells, as assessed by 8-hydroxy-2'-deoxyguanosine and γ-H2AX, increased after crocidolite exposure during regeneration accompanied by β-catenin activation. Conversely, β-catenin overexpression in mesothelial cells induced higher intracellular catalytic Fe(II) with increased G2/M cell-cycle fraction, when p16INK4A genomic loci localized more peripherally in the nucleus. Mesothelial cells after challenge of H2O2 under β-catenin overexpression presented low p16INK4A expression with a high incidence of deletion in p16INK4A locus. Thus, crocidolite generated catalytic Fe(II)-rich mutagenic environment for mesothelial cells by necrotizing macrophages with lysosomal cell death and ferroptosis. These results suggest novel molecular strategies to prevent mesothelial carcinogenesis after asbestos exposure.

Frequent homozygous deletion of Cdkn2a/2b in tremolite-induced malignant mesothelioma in rats

The onset of malignant mesothelioma (MM) is linked to exposure to asbestos fibers. Asbestos fibers are classified as serpentine (chrysotile) or amphibole, which includes the crocidolite, amosite, anthophyllite, tremolite, and actinolite types. Although few studies have been undertaken, anthophyllite has been shown to be associated with mesothelioma, and tremolite, a contaminant in talc and chrysotile, is a risk factor for carcinogenicity. Here, after characterizing the length and width of these fibers by scanning electron microscopy, we explored the cytotoxicity induced by tremolite and anthophyllite in cells from an immortalized human mesothelial cell line (MeT5A), murine macrophages (RAW264.7), and in a rat model. Tremolite and short anthophyllite fibers were phagocytosed and localized to vacuoles, whereas the long anthophyllite fibers were caught on the pseudopod of the MeT5A and Raw 264.7 cells, according to transmission electron microscopy. The results from a 2-day time-lapse study revealed that tremolite was engulfed and damaged the MeT5A and RAW264.7 cells, but anthophyllite was not cytotoxic to these cells. Intraperitoneal injection of tremolite in rats induced diffuse serosal thickening, whereas anthophyllite formed focal fibrosis and granulomas on peritoneal serosal surfaces. Furthermore, the loss of Cdkn2a/2b, which are the most frequently lost foci in human MM, were observed in 8 cases of rat MM (homozygous deletion [5/8] and loss of heterozygosity [3/8]) by array-based comparative genomic hybridization techniques. These results indicate that tremolite initiates mesothelial injury and persistently frustrates phagocytes, causing subsequent peritoneal fibrosis and MM. The possible mechanisms of carcinogenicity based on fiber diameter/length are discussed.

Lung cancer in a patient with predominantly short tremolite fibers in his lung

The carcinogenicity of short tremolite fibers in human has not been cleared and has been argued hitherto. A lung cancer patient had worked at a gabbro quarry. Particles isolated from the excised lung parenchyma of the patient were measured for asbestos bodies (ABs) and asbestos fibers (AFs). The concentrations of ABs were 3964 AB/g dry lung, and AFs were 5.60 × 106 fibers/g dry lung (>5 um in length) and 22.5 × 106 fibers/g dry lung (>1 um in length). AFs were mostly tremolite fibers and under 7 um in length (mean length 4.0 um, standard deviation 2.8 um). Almost all fibers were <10 um in length and an aspect ratio (AR) of <20:1 and ≥3:1. The patient had never smoked. His wife, who had worked with him in the quarry, had died of pleural mesothelioma. This study strongly indicates that such short tremolite fibers will induce lung cancer and possibly mesothelioma in human.

Size- and type-specific exposure assessment of an asbestos products factory in China

This study describes fibre size and type-specific airborne asbestos exposures in an asbestos product factory. Forty-four membrane filter samples were analysed by scanning electron microscopy to determine the size distribution of asbestos fibres, by workshop. Fibre frequencies of bivariate (length by width) categories were calculated and differences between workshops were tested by analysis of variance. Data were recorded for 13,435 chrysotile and 1075 tremolite fibres. The proportions between size metrics traditionally measured and potentially biologically important size metrics were found to vary in this study from proportions reported in other cohort studies. One, common size distribution was generated for each asbestos type over the entire factory because statistically significant differences in frequency between workshops were not detected. This study provides new information on asbestos fibre size and type distributions in an asbestos factory. The extent to which biologically relevant fibre size indices were captured or overlooked between studies can potentially reconcile currently unexplained differences in asbestos-related disease (ARD) risk between cohorts. The fibre distributions presented here, when combined with similar data from other sites, will contribute to the development of quantitative models for predicting risk and our understanding of the effects of fibre characteristics in the development of ARD.

Significant relationship between the extent of pleural plaques and pulmonary asbestos body concentration in lung cancer patients with occupational asbestos exposure

BACKGROUND

The aim of this study was to elucidate whether there is a relationship between the extent of pleural plaques and pulmonary asbestos body concentration (PABC).

METHODS

The subjects were 207 lung cancer patients with occupational asbestos exposure. We determined the plaque extent by findings on chest images using our own criteria. PABCs were measured in resected or autopsy lung specimens.

RESULTS

There was a significant relationship between plaque extent and PABC. Seventy-five percent of the patients determined to have extensive plaques based on our criteria had a PABC of ≥5,000 asbestos bodies per gram of dry lung tissue, which is one of the certification criteria of lung cancer caused by asbestos for workers' compensation in Japan.

CONCLUSIONS

In lung cancer patients, the plaque extent had a significant positive relationship with the PABC. The plaque extent would be useful as a proxy for PABC for lung cancer compensation purposes.

Combined effects of asbestos and cigarette smoke on the development of lung adenocarcinoma: different carcinogens may cause different genomic changes

The carcinogens in cigarette smoke are distinct from asbestos. However, an understanding of their differential effects on lung adenocarcinoma development remains elusive. We investigated loss of heterozygosity (LOH) and the p53 mutation in 132 lung adenocarcinomas, for which asbestos body burden (AB; in numbers per gram of dry lung) was measured using adjacent normal lung. All cases were classified into 9 groups based on a matrix of cumulative smoking (CS in pack‑years; CS=0, 0<CS<25, ≥25 CS) and AB (AB=0, 0<AB<1,000, ≥1,000 AB). AB=0 indicates a lower level than the detection limit of ~100. LOH frequency increased only slightly with the elevation of CS in the AB=0 groups. In the AB>0 groups, LOH frequency increased as AB and/or CS was elevated and was significantly higher in the ≥1,000 AB, ≥25 CS group (p=0.032). p53 mutation frequency was the lowest in the AB=0, CS=0 group, increased as AB and/or CS rose, and was significantly higher in the ≥1,000 AB, ≥25 CS group (p=0.039). p53 mutations characteristic of smoking were frequently observed in the CS>0 groups contrary to non-specific mutations in the CS=0, AB>0 groups. Combined effects of asbestos and smoking were suggested by LOH and p53 analyses. Sole exposure to asbestos did not increase LOH frequency but increased non‑specific p53 mutations. These findings indicate that the major carcinogenic mechanism of asbestos may be tumor promotion, acting in an additive or synergistic manner, contributing to the genotoxic effect of smoking. Since this study was based on a general cancer center's experience, the limited sample size did not permit the consideration that the result was conclusive. Further investigation with a large sample size is needed to establish the mechanism of asbestos-induced lung carcinogenesis.

Gene polymorphism and frequencies of the NPC1L1 gene (rs2072183, rs217434 and rs217428) in Japanese patients with dyslipidemia

WHAT IS KNOWN AND OBJECTIVE

Niemann-Pick C1-Like 1 (NPC1L1) plays a pivotal role in intestinal cholesterol absorption. Ezetimibe is known as an inhibitor for NPC1L1 and decreases concentration of low-density lipoprotein cholesterol (LDL-C) in blood. Responses of the decrease of serum LDL-C levels to ezetimibe have been reported to be different among NPC1L1 variants. However, there are still limited data concerning the genetic variation in the NPC1L1 gene, specifically, in Japanese patients with dyslipidemia. The purpose of this study is to elucidate genotype and allele frequencies of the NPC1L1 gene in Japanese patients with dyslipidemia.

METHODS

Written informed consent was obtained from all participants. All patients were administered ezetimibe at the dose of 10 mg for once a day either alone or coadministered with statins. Patient's data were retrospectively obtained from their medical records. Genomic DNA was extracted from whole blood samples and analysed three NPC1L1 SNPs (rs2072183, rs217428 and rs217434) by the direct sequencing method.

RESULTS AND DISCUSSION

We found that there is a significant difference of genotype frequencies between healthy Japanese and dyslipidemic subjects in rs2072183. No significant differences were observed in rs217428 and rs217434; however, comparison of our data with literature reports suggests that there are significant differences in the frequencies of rs217428 and rs217434 between Canadian and Japanese dyslipidemic patients.

WHAT IS NEW AND CONCLUSION

Our study is the first report concerning the genotype and allele frequencies of the gene coding for NPC1L1 in Japanese patients with dyslipidemia. The most notable result was to demonstrate that there exists a significant difference in rs2072183 variant between healthy Japanese and dyslipidemic subjects and also found that there exists genetic variation of rs2072183 between Japanese and Canadian patients with dyslipidemia. Our results are expected to facilitate research in the proper use of ezetimibe-based mono- or combination therapies. Further studies will be required to evaluate the effects of rs2072183 on the efficacy of LDL cholesterol reduction by ezetimibe.

Rat model demonstrates a high risk of tremolite but a low risk of anthophyllite for mesothelial carcinogenesis

Asbestos was abundantly used in industry during the last century. Currently, asbestos confers a heavy social burden due to an increasing number of patients with malignant mesothelioma (MM), which develops after a long incubation period. Many studies have been conducted on the effects of the asbestos types that were most commonly used for commercial applications. However, there are few studies describing the effects of the less common types, or minor asbestos. We performed a rat carcinogenesis study using Japanese tremolite and Afghan anthophyllite. Whereas more than 50% of tremolite fibers had a diameter of < 500 nm, only a small fraction of anthophyllite fibers had a diameter of < 500 nm. We intraperitoneally injected 1 or 10 mg of asbestos into F1 Fischer-344/Brown-Norway rats. In half of the animals, repeated intraperitoneal injections of nitrilotriacetate (NTA), an iron chelator to promote Fenton reaction, were performed to evaluate the potential involvement of iron overload. Tremolite induced MM with a high incidence (96% with 10 mg; 52% with 1 mg), and males were more susceptible than females. Histology was confirmed using immunohistochemistry, and most MMs were characterized as the sarcomatoid or biphasic subtype. Unexpectedly NTA showed an inhibitory effect in females. In contrast, anthophyllite induced no MM after an observation period of 550 days. The results suggest that the carcinogenicity of anthophyllite is weaker than formerly reported, whereas that of tremolite is as potent as major asbestos as compared with our previous data.

Iron overload signature in chrysotile-induced malignant mesothelioma

Exposure to asbestos is a risk for malignant mesothelioma (MM) in humans. Among the commercially used types of asbestos (chrysotile, crocidolite, and amosite), the carcinogenicity of chrysotile is not fully appreciated. Here, we show that all three asbestos types similarly induced MM in the rat peritoneal cavity and that chrysotile caused the earliest mesothelioma development with a high fraction of sarcomatoid histology. The pathogenesis of chrysotile-induced mesothelial carcinogenesis was closely associated with iron overload: repeated administration of an iron chelator, nitrilotriacetic acid, which promotes the Fenton reaction, significantly reduced the period required for carcinogenesis; massive iron deposition was found in the peritoneal organs with high serum ferritin; and homozygous deletion of the CDKN2A/2B/ARF tumour suppressor genes, the most frequent genomic alteration in human MM and in iron-induced rodent carcinogenesis, was observed in 92.6% of the cases studied with array-based comparative genomic hybridization. The induced rat MM cells revealed high expression of mesoderm-specific transcription factors, Dlx5 and Hand1, and showed an iron regulatory profile of active iron uptake and utilization. These data indicate that chrysotile is a strong carcinogen when exposed to mesothelia, acting through the induction of local iron overload. Therefore, an intervention to remove local excess iron might be a strategy to prevent MM after asbestos exposure.

Selective detection of airborne asbestos fibers using protein-based fluorescent probes

Fluorescence microscopy (FM) is one of the most important analytical tools in modern life sciences, sufficiently sensitive to allow observation of single molecules. Here we describe the first application of the FM technique for the detection of inorganic environmental pollutants-airborne asbestos fibers that can cause asbestosis, mesothelioma, and lung cancer. In order to assess FM capabilities for detecting and counting asbestos fibers, we screened E. coli lysate for proteins that bind to amphibole asbestos. In combination with the previously discovered E. coli protein DksA (Kuroda et al., Biotechnol. Bioeng. 2008, 99, 285-289) that can specifically bind to chrysotile, the newly identified GatZ protein was used for selective and highly sensitive detection of two different asbestos types. Our novel FM-based method overcomes a number of limitations of the commonly used phase-contrast microscopy (PCM) method, offering a convenient alternative to PCM for airborne asbestos monitoring.

Pulmonary toxicity induced by intratracheal instillation of coarse and fine particles of cerium dioxide in male rats

In order to examine the short-, medium- and long-term effects of cerium dioxide particles of different sizes on the lung, 10-wk-old male Wistar rats were administered a physiological saline solution with a suspension of coarse or fine particles of cerium dioxide at 34 mg/kg body weight by a single intratracheal instillation. Lungs were examined with cellular and biochemical analyses of the bronchoalveolar lavage (BAL) fluid and histopathology on different days after the instillation. Geometric mean and geometric standard deviation of the diameter were 3.90 microm +/- 1.93 for the coarse (Ce-C) particles, and 0.20 microm +/- 1.20 for the fine (Ce-F) particles. There were no lesions in the lung in the Ce-C-instilled group at any time point after the instillation. The instillation of Ce-F particles primarily induced inflammation, granulomas, mobilization and impairment of alveolar macrophages (AMs), and pulmonary alveolar proteinosis, together with very slight degrees of Type II epithelial cell hyperplasia and of collagen deposition. The pulmonary toxicity of Ce-F-instilled rats was found to be markedly enhanced in sharp contrast to that of Ce-C-instilled rats on the basis of equal mass concentration, suggesting clear dependence of the pulmonary toxicity on numbers and sizes of particles. Causative factors for the pulmonary alveolar proteinosis are discussed with reference to the impaired AMs.

Mesothelioma in a worker who spun chrysotile asbestos at home during childhood

BACKGROUND

Malignant mesothelioma has a long latency period and more commonly found in those exposed to amphibole than chrysotile asbestos.

METHOD

A 35 years old asbestos worker in an asbestos textile plant in Chongqing, China, developed mesothelioma after only 4 years of employment. He was born and bred in a company residence of an asbestos plant and manually spun asbestos thread during school age. In the plant, not amphibole but only chrysotile has been used.

RESULTS

Diagnosis of malignant mesothelioma was confirmed by comprehensive approaches including gross appearance, histology, histochemistry, and immunocytochemistry. In the lung and tumor tissues, huge number of tremolite with exceptional chrysotile was observed despite the reverse proportion in the work environment.

DISCUSSION

Residential exposure and home spinning of asbestos seemed contributed to the early development of mesothelioma in this subject. Although only chrysotile was used and contamination of tremolite was low in the work environment, chrysotile seemed to be cleared leaving tremolite remain in the tissue.

CONCLUSION

Chrysotile with little contamination of tremolite can lead to early development of malignant mesothelioma when heavily exposed from childhood at a company residence with household exposure. There can be several mechanisms for tremolite to remain in the lung tissue, far exceeding chrysotile in number.

Effect of interleukins response to ECM-induced acquisition of drug resistance in MCF-7 cells

AIM

To examine the effect of various components of extracellular matrix (ECM) on acquisition of drug resistance to taxol and camptothecin by breast carcinoma cell line MCF-7.

METHODS

Cancer cells were cultured on bovine serum albumin (BSA), vitronectin (VN), fibronectin (FN), collagen type I (COL-I), or Matrigel-coated plates with or without taxol (paclitaxel) or camptothecin treatment. The effect of anticancer drugs on cell growth was accessed by XTT assay, and the alterations of cellular morphology were examined by phase contrast microscopy. Immunofluorescence study was performed using monoclonal anti-beta-tubulin antibody.

RESULTS

All cell lines showed a significant decrease in cell survival when treated with anticancer drugs without components of ECM, whereas survival rates of Caco-2, MCF-7 and NCI-H292 were significantly increased when cells were cultured on COL-I- and Matrigel-coated dishes after treatment with paclitaxel or camptothecin. MCF-7 cells showed and maintained a colony formation when cultured on the COL-I- and Matrigel-coated dish. Moreover, cytotoxicity (IC50) was decreased by taxol (paclitaxel) or camptothecin treatment during colony formation in MCF-7 cells, suggesting that morphological changes could increase survival of cells treated with anticancer drugs. Thick circumferential bundles of microtubules around the periphery of the cells and chromatin condensation was not observed for MCF-7 cells on COL-I- and Matrigel-coated dishes treated with paclitaxel. To confirm this, spheroid cells were prepared, and we found that cytotoxicity was decreased for these cells, and significantly increased when cells were co-cultured on Matrigel- or COL-I-coated upper wells. The effect of anticancer drugs on cell survival was efficiently inhibited by interleukin-6 (IL-6) and interleukin-8 (IL-8).

CONCLUSIONS

Present results suggested that not only integrin-ECM interactions but also other factors such as IL-6and IL-8secreted by cancer cells, cultured on COL-I and Matrigel dishes, are involved in the acquisition of drug resistance by MCF-7.

Comparative Cytotoxicity Study of Rock Wool and Chrysotile by Cell Magnetometric Evaluation

Rock wool (RW), a type of man-made mineral fiber (MMMF), is a building material used as an asbestos substitute for heat insulation, fire resistance, and reinforcement. RW is included in group 3 of the IARC classification. In the present study, the cytotoxicity of RW was investigated by cell magnetometry, enzyme assay, DNA ladder detection, and electron microscopic morphological evaluation in comparison with chrysotile fibers (CF). Specimens were prepared by 18-h incubation of Fischer rat alveolar macrophages in the presence of RW fibers as the study material, CF as positive control, and phosphate-buffered saline (PBS) as negative control, together with a relaxation indicator, Fe3O4, except for morphological evaluation, followed by additional procedures of external magnetization and subsequent 20-min remanent magnetic field measurement for magnetometric evaluation, and macrophage DNA extraction for evaluating possible apoptosis by DNA ladder detection. In magnetometry, relaxation, a marker of cytotoxicity, was rapid in both the RW- and PBS-treated groups, while it was delayed in both the long and short CF-treated groups. Differences in percent lactate dehydrogenase (LDH) release between the RW-treated group and PBS-treated group were not significant, but those between the RW-treated group and short CF-treated group were statistically significant. A DNA ladder was not detected in any of the study groups. Electron micrographs showed that RW did not cause any change, but CF caused changes in macrophages. Thus, magnetometric measurements suggested no cytotoxicity of RW. We plan, in the future, to evaluate the safety of RW by magnetometric measurement and morphological observation of the lungs in in vivo inhalation experiments.

Behavior of rock wool in rat lungs after exposure by nasal inhalation

To evaluate the safety of rock wool (RW) fibers, we examined the biopersistence of RW fibers in the lungs of rats, based on the changes of fiber number and fiber size in the length and width, in a nose-only inhalation exposure study. Twenty male Fischer 344 rats (6 to 10 wk old) were exposed to RW fibers at a fiber concentration of 70.6 (20.4) fiber/m(3) and a dispersion density of 30.4 (6.6) mg/m(3) [arithmetic mean (SD)] continuously for 3 h daily for 5 consecutive days. Five rats each were sacrificed shortly after exposure ended (baseline group) and at 1, 2, and 4 wk after exposure, and their lung tissues were ashed by a low temperature plasma-asher. The numbers and sizes of fibers in the ash samples were determined using a phase contrast microscope and a computed image analyzer. The fiber numbers in the lungs at 4 wk after exposure had significantly decreased from the baseline value, i. e. shortly after exposure (p<0.05). The half-lives of RW fibers calculated using the one-compartment model were 32 d for total fibers and 10 d for fibers longer than 20 microm in length. Fiber number was 53.6% of the baseline at 4 wk after exposure (baseline group=100%). Likewise, fiber sizes had significantly decreased at 4 wk after exposure (p<0.05), probably because fibers had been dissolved in body fluid, phagocytosed by alveolar macrophages or discharged from the body by mucociliary movement. In future studies, it will be necessary to examine the carcinogenicity of RW fibers through long-term inhalation studies.

Dissolution of functional materials and rare earth oxides into pseudo alveolar fluid

The dissolution rates of rare earth oxides and two types of rare earth containing functional materials into water, saline solution, and Gamble's fluid were measured in order to evaluate the biological effects of rare earth-containing functional materials. The tested materials were yttrium, lanthanum, cerium and neodymium oxides, and neodymium-boron-iron magnet alloy (NdBFe) and lanthanum-mish-metal-nickel-cobalt (LmNiCo) hydrogen-containing alloy. The dissolution rates of the rare earth oxides were very low, resulting in concentrations of rare earth elements in the test solutions of the order of ppb. In the most extreme case, Gamble's fluid dissolved 1,400 times more of the rare earth oxides than pure water. Fairly high concentration of neodymium were found in the dissolving fluids, which means that trace neodymium present as an impurity in each rare earth oxide dissolved preferentially. For yttrium oxide, the ratio of neodymium to yttrium that dissolved in the saline solution was greater than 78,000 to 1, taking into account the amount of each that was originally present in the yttrium oxide.

Lung disorders of workers exposed to rush smear dust in China

The aim of this study was to evaluate the lung disorders of the workers exposed to rush smear dust. A cross sectional study was carried out on 1,709 current workers (788 male, 921 female) in 80 factories. All subjects were asked by questionnaire, and health examination including chest X-ray was conducted for 661 workers in 35 factories. Lung function test was also examined for 119 non-smoking males among 661 subjects. Dust samplings were collected and total and respirable dust concentrations at 127 spots in 35 factories were measured. The geometric mean dust concentration in the workshops was up to 20.00 mg/m(3), and the geometric mean respirable dust concentration reached 8.22 mg/m(3). The mean quartz concentration of accumulated dust was 29.2%. The prevalence of radiographic small opacities profusion category > or = 1/0, according to the ILO 1980 Classification System, was 2.6% among 661 employees. One worker was found to have pneumoconiotic findings of 2/2 profusion accompanied with large opacity. The prevalence of pneumoconiosis (1/0 or more) correlated with cumulative dust exposure (r=0.192, p<0.0001). The similar relationship was found between the prevalence rate of cough or sputa and worksite dust concentration. In non-smokers, a positive association was found between the prevalence of cough and occupational exposure duration (r=0.080, p=0.004). Approximately 19.3% and 34.5% of employees suffered from respiratory impairment for FVC and FEV1.0, respectively. This is the first report of "rush" pneumoconiosis in China. Rush mat workers were found to be at high risk for pneumoconiosis, a preventable disease. Our results showed a dose-response relationship between rush-mat dust level and the prevalence of pneumoconiosis. Similar relationship between the prevalence of cough and sputum and the work duration was found for non-smoking workers but not for smoking workers.

Field evaluation of mercury vapor analytical methods: comparison of the "double amalgam method" and ISO 17733

In this study, a gold amalgam method called the "Double amalgam method" was compared with the ISO 17733 method for mercury vapor analysis method. In terms of sensitivity and ease of operation, the amalgamation method is superior to the oxidation method. Two parallel samplings were carried out in this research at a button battery factory, where the mercury vapor level in the air was about 0.001 mg/m3 and at a fluorescent lamp factory, where the mercury vapor level was about 0.015 mg/m3. In the both cases, the measured values of the two showed good agreement with each other. As these two workplaces represent typical mercury levels in industries today, the double amalgam method is applicable to working environment measurement.

Dendriform pulmonary ossification in patient with rare earth pneumoconiosis

The case history is presented of a patient with pathologically proven dendriform pulmonary ossification and rare earth pneumoconiosis confirmed by analytical transmission electron microscopy. This is thought to be the first report of this association.

Behavior of new type of rock wool (HT wool) in lungs after exposure by nasal inhalation in rats

OBJECTIVES

Previous types of rock wool has been recently replaced with high-temperature wool (HT wool). HT wool is characterized by a chemical composition with a higher concentration of Al(2)O(3) and a lower concentration of SiO(2), lower biopersistence, and a higher melting point than previous types of rock wool. To evaluate the safety of HT wool, an asbestos substitute, we examined the biopersistence of HT wool in the lungs, based on changes in fiber count according to the length and fiber size (length and width), by performing a nose-only inhalation exposure study in rats.

METHODS

Male Fischer 344 rats were exposed to fibers at the target exposure concentration of 30 mg/m(3) continuously for 3 hours daily for 5 consecutive days. Rats were sacrificed shortly after exposure, and 1, 2, and 4 weeks after exposure, and their lung tissues were incinerated at a low temperature. Then, fiber counts and sizes in the lungs were analyzed using a phase contrast microscope.

RESULTS

The fiber count in the lungs 4 weeks after exposure significantly decreased from the baseline value (shortly after exposure). The half-life of fibers calculated from the approximation curve was 34 days for all fibers and 11 days for fibers longer than 20 μm.

CONCLUSIONS

Both the length and width significantly decreased 4 weeks after exposure, probably because fibers were ingested by alveolar macrophages, discharged to outside of the body by mucociliary movement, or lysed by body fluid. In future studies, it is necessary to examine the long-term persistence of fibers in the lungs.

An autopsy case of primary pericardial mesothelioma in arc cutter exposed to asbestos through talc pencils

An autopsy case of a primary pericardial mesothelioma in a 53-year-old arc cutter is reported. He had often had the chance to inhale dust generated by sharpening the slate pencils composed of talc. He was admitted for heart failure due to pericardial tumor, but later died. The tumor was mainly located on the pericardium with a thickness of about 2.5 cm. Small nodular disseminations were observed in the left parietal pleura. Microscopically, tumor cells were epithelial-like and rich in histochemical demonstrable hyaluronic acid. Findings of immunohistochemical markers revealed keratin (+), EMA (+), calretinin (+), and CEA (-), which were characteristics of mesothelioma of epithelial type. The number of asbestos bodies (AB) in the lung parenchyma was increased (2026 AB/gram dry lung tissue). Subsequent transmission electron microscopic examination equipped with an energy dispersive X-ray analyzer revealed that the fibers identified in the lungs were fibrous talc and actinolite. These findings suggested that this patient had been occupationally exposed to asbestos contaminated in the talc pencils, which induced the development of primary pericardial mesothelioma.

Evaluation of cellular toxicity of TAFMAG, a natural substitute for asbestos from China

Asbestos is a very important material for industrial use. However, the need for a substitute for asbestos fiber is currently on the rise due to its high disease causing potential. This study evaluated the potential bio-hazardous effects of TAFMAG, a natural fibrous silicate produced in China, in comparison with chrysotile, a typical toxic asbestos. The physicochemical properties of TAFMAG were very similar to those of chrysotile when it was examined by a scanning electron microscope (SEM) and X-ray diffraction (XRD) analyses. Both of TAFMAG and chrysotile showed high content of magnetite and Fenton activity when compared with wollastonite, a non-asbestos fiber with a known low toxicity. When their cellular toxicity was assessed, TAFMAG showed no or less comparable to that of chrysotile in the hemolysis and lipid peroxidation of erythrocytes, and also on a MTT assay in RLE-6TN, a rat alveolar epithelial cell line. Pre-treatment of fibers with desferrioxamine, an iron chelator, showed that iron content of TAFMAG and chrysotile might be important in their cellular toxicity. These results suggest that TAFMAG is potentially toxic when inhaled into the lung and appropriate laws and regulations should be established for its use.

Proposed criteria for mixed-dust pneumoconiosis: Definition, descriptions, and guidelines for pathologic diagnosis and clinical correlation1 1The NIKKO-Symposium on Mixed-Dust Pneumoconiosis was held October 18–19, 1997, in Nikko, Tochigi, Japan, to develop diagnostic criteria for mixed-dust pneumoconiosis under the auspices of Labour Welfare Corporation, Tokyo, Japan. The Organizing Committee included Keizo Chiyotani, Koichi Honma, Yutaka Hosoda, and Hisao Shida, and participants included Zoltán Adamis, Eduardo Algranti, Toshiharu Fuyuki, Kiyonobu Kimura, Otha Linton, Michihito Mishina, Hiroshi Morikubo, Alvaro R. Osornio-Vargas, Yoshiaki Saitoh, Yasushi Shinohara, and Hiroshi Watanabe

We defined mixed-dust pneumoconiosis (MDP) pathologically as a pneumoconiosis showing dust macules or mixed-dust fibrotic nodules (MDF), with or without silicotic nodules (SN), in an individual with a history of exposure to mixed dust. We defined the latter arbitrarily as a mixture of crystalline silica and nonfibrous silicates. According to our definition of MDP, therefore, MDF should outnumber SN in the lung to make a pathologic diagnosis of MDP. In the absence of confirmation of exposure, mineralogic analyses can be used to support the pathologic diagnosis. The clinical diagnosis of MDP requires the exclusion of other well-defined pneumoconioses, including asbestosis, coal workers' pneumoconiosis, silicosis, hematite miners' pneumoconiosis, welders' pneumoconiosis, berylliosis, hard metal disease, silicate pneumoconiosis, diatomaceous earth pneumoconiosis, carborundum pneumoconiosis, and corundum pneumoconiosis. Typical occupations associated with the diagnosis of MDP include metal miners, quarry workers, foundry workers, pottery and ceramics workers, and stonemasons. Irregular opacities are the major radiographic findings in MDP (ILO 1980), in contrast to silicosis, in which small rounded opacities predominate. Clinical symptoms of MDP are nonspecific. MDP must be distinguished from a variety of nonoccupational interstitial pulmonary disorders.

Quantitative analysis of tridymite and cristobalite crystallized in rice husk ash by heating

The quantities of two forms of crystalline silica, tridymite and cristobalite, in heated rice husk ash (RHA) samples were determined by X-ray diffraction (XRD) and chemical methods. Two RHA samples, containing 93% SiO2 and 2-3% K2O, were prepared from charcoaled rice husk products and heated to above 900 degrees C. The crystalline silica made up over 60-80% of the total silica in the heated RHA samples based on the XRD analysis. The crystalline phases in the two samples were somewhat different: The sample heated in the temperature range of 900 to 1,200 degrees C contained 52-62% cristobalite and 10-17% tridymite, but the other sample heated at a comparable temperature, above 1,100 degrees C, contained 46-66% tridymite and 37-16% cristobalite. Based on a correlation of lower tridymite crystallization temperature with higher potassium content, it was concluded that higher potassium levels were responsible for this difference. The pyrophosphoric acid analysis did not give exact results in the evaluation of total crystalline silica content in these RHA samples. As the combustion of rice husk was considered to cover the demands for energy and silica resource in Asian countries, cristobalite and tridymite crystallized in RHA by burning of rice husk should be assessed precisely by XRD analysis and the airborne dust in relevant workplace be controlled.

Clinicopathological features of pure mica pneumoconiosis associated with Sjögren syndrome

BACKGROUND

There are few reports on the clinical, radiologic, and pathologic features of pure mica pneumoconiosis.

METHODS

A case of definite pure mica pneumoconiosis in a rubber factory worker is reported with the clinicopathological findings.

RESULTS

Chest HRCT demonstrated subpleural and peribronchovascular interstitial thickening. The characteristic histologic features were pulmonary fibrosis accompanied by prominent histiocytic granulomas containing giant cells.

CONCLUSIONS

Pure mica pneumoconiosis can be identified by specific radiologic and pathologic findings.

Effects of surface characteristics of potassium titanate whisker samples on acute lung injury induced by a single intratracheal administration in rats

We compared in vivo biological effects, focusing on lung inflammatory responses after a single intratracheal administration of two types of well-characterized whiskers: potassium octatitanate and potassium hexatitanate, which have similar fiber sizes and chemical compositions, except their surface morphology. The geometrical mean of length (microm), width (microm), and geometric standard deviation (GSD) are: K(2)Ti(8)O(17) (PT1), 6.0[2.0], 0.35[1.51], having rough surface; K(2)Ti(6)O(13) (PT2), 5.0[2.18], 0.31[1.63], having smooth surface. Sixty male Wistar rats (8 wk old) under anesthesia were injected intratracheally with 2 doses of fibers (0.2 mg/0.5 ml/rat, 1.0 mg/0.5 ml/rat) or the same amount of saline solution (group C). Animals were sacrificed on days 1, 3, and 7 after fiber administration, and then the lung tissue and bronchoalveolar lavage (BAL) were collected. There were no obvious differences among the three groups in the yield of BAL fluid. Total protein concentration in BAL increased significantly from day 1; BAL fucose level increased significantly from day 3 in a dose-dependent manner, which gradually recovered by day 7 in groups PT1 and PT2. BAL total protein and fucose in group PT1 increased significantly compared with those in group PT2 at a dose level of 1.0 mg. A dose-independent increase of beta-glucuronidase activity and decrease of superoxide dismutase activity were observed in both fibers. BAL tumor necrosis factor-alpha (TNF-alpha) increased significantly in animals treated with 1.0 mg dosage of PT1 and PT2 on day 1. However, BAL IL-1beta did not show any marked change during the experimental period in animals treated with both fibers. On day 1, BAL cytokine-induced neutrophil attractants (CINC)/growth-related gene product (GRO) increased significantly in the PT1 group treated with 0.2 and 1.0 mg dosage. On day 3, the group treated with 1.0 mg PT1 showed significant increase of CINC/GRO compared with the group treated with 1.0 mg PT2, which recovered to the control level on day 7. Expression of various chemokine mRNAs (MCP-3, MIP-1alpha, RANTES, and eotaxin) increased in rats treated with PT1 or PT2 on day 1 and/or day 3. Increase of gene expression in the PT1 group was greater than that of the PT2 group at 0.2 mg dosage level. These results suggest that differences in the surface morphology of the whisker fibers of similar length and diameter, density, and chemical composition appear to be related to the facilitation of macrophage phagocytes in the macrophage-derived biological effects in acute lung injury induced by inhaled fibers.

[Effects of rush-mat dust on the health of exposed workers]

OBJECTIVE

To evaluate the effect of exposure to rush-mat dust on the health of workers.

METHODS

A cross sectional study of 661 workers (349 men, 312 women) from 35 rush-mat plants was carried out by using occupational health investigation, questionnare and physical examination.

RESULTS

The geometric mean total dust concentration in the workshop was up to 20.00 mg/m3, and the geometric mean respirable dust concentration reached 8.22 mg/m3. The mean free SiO2 concentration of accumulated dust was 25.6%. The prevalence of radiographic small opacities profusion category > or = 1/0, according to the China Classification for pneumoconiosis (GB 5906-2000), and compared with the ILO 1980 system, was 2.57%. Even more, one man had category 2 pneumoconiosis with progressive massive fibrosis. However, the incidence of pneumoconiosis (1/0 at least) was correlated with work duration and dust concentration(r = 1.156, P < 0.001; r = 0.106, P = 0.006, respectively). Some positive correlations were found between the incidence of cough or expectoration and occupational exposure (r = 0.085, P = 0.028; r = 0.094, P = 0.016, respectively).

CONCLUSION

To our knowledge, this is the first report of rush pneumoconiosis in China. The results have offered the possibility of a dose-response relationship between rush-mat dust and pneumoconiosis. More investigation in this area is need.

Chemiluminescent detection of induced reactive oxygen metabolite production of human polymorphonuclear leucocytes by anthophyllite asbestos

Incidences of lung cancer and pleural plaque have been reported in relation to exposure to anthophyllite asbestos. To investigate the pathogenic mechanisms of anthophyllite, chemiluminescence (CL) detection of reactive oxygen metabolite (ROM) generation of human polymorphonuclear leucocytes (PMN) stimulated by anthophyllite asbestos was determined and compared with that of other asbestos and mineral fiber samples. When anthophyllite fiber sample was mixed with the luminol-primed PMN, high levels of CL which exhibited a specific time course characterized by two separate peaks were induced. The CL induced by anthophyllite sample was greater than that induced by chrysotile, crocidolite, and amosite asbestos. We further investigated the two peaks of CL using specific inhibitors of signal transduction mechanisms. The two peaks of CL by anthophyllite sample were different in sensitivity to cytochalasin B and genistein; the former relates to the cytoskeleton-dependent mechanism and the latter has been shown to inhibit tyrosine kinase, which resides in the pathway to cause PMN activation. The strong ROM reaction of PMN by anthophyllite suggests that the surface characteristics of the fiber may participate in the pathogenic mechanisms of anthophyllite asbestos.

An operated case of lung cancer with pleural plaques: its asbestos bodies, fiber analysis and asbestos exposure

This case was a 79-year-old man with pleural plaques, which had been pointed out in the left lung field on chest X-ray six years ago. A new shadow in the right chest appeared in 1999 and was closely examined. Cytological class IV carcinoma was detected in his lung tissue obtained by broncho-fiberscope. Lobectomy of the right upper lobe was performed, and calcified pleural plaques were found on the chest wall. The clinical diagnosis was poorly differentiated squamous cell carcinoma, T1N0M0. In World War II when he was 26 years old, he had worked as a boiler man on a battle cruiser for one year. The amount of asbestos bodies (AB) was 3,348 per gram dry lung tissue. The cores of AB and asbestos fibers were examined and showed that amosite was the most prevalent and crocidolite, tremolite and chrysotile were present in that order. After leaving the navy, he had worked as a farmer throughout his life, suggesting that he had never contacted asbestos occupationally after being a boiler man. It is strongly suggested that he had been exposed to asbestos during his work as a boiler man and that produced pleural plaques and lung cancer 50 years' later.

Airborne fiber concentration and size distribution of mineral fibers in area with serpentinite outcrops in Aichi prefecture, Japan

Airborne fiber concentrations and size distributions of both asbestos and nonasbestos fibers were determined at property boundaries of 4 serpentinite quarries producing crushed stone (quarry property boundary), 10 sites within 10 km of the area with serpentinite outcrops (serpentinite area), and 2 sites in a reference area. The asbestos was identified in 7 rock and 3 soil samples collected in the serpentinite area. The geometric means of airborne concentrations of asbestos and nonasbestos fibers longer than 0.2 microm in length were: 384 and 447 fibers/liter (f/L) in the quarry property boundary (in operation), 12 and 124 f/L in the quarry property boundary (in closed), 5 and 103 fibers/liter in the serpentinite area, and less than 2 and 59 fibers/liter in the reference area, respectively. There was a significant difference in airborne concentrations of both asbestos and nonasbestos fibers among the areas. Ttremolite/actinolite were found with chrysotile in the stones. Airborne concentrations of tremolite/actinolite were higher than those of chrysotile at the quarry property boundary and in the serpentinite area. Tremolite/actinolite were also found in the soils. There was no significant difference among the areas in the arithmetic means of fiber size distribution of both asbestos and nonasbestos fibers.

Clinical, pathological and mineralogical features in two autopsy cases of workers exposed to agalmatolite dust

An agalmatolite miner and processor showed large shadows at the bilateral hila accompanied by surrounding emphysematous changes and irregular shadows on chest X-ray films. Chest CT scans were characterized by a mixture of tiny irregular structures and small round opacities. Histopathological examination revealed massive fibrosis, which corresponded to large shadows, but only a small number of typical silicotic nodules, indicating mixed dust pneumoconiosis. Mineralogical examination of the autopsy lungs showed quartz, pyrophyllite, mica, and kaolinite. Quartz accounted for 70% of the amount of all mineral dust in both patients, but pyrophyllite accounted for 10.8% and 14.4%. The pulmonary mineral dust composition in the two patients was well consistent with the mineral composition of the raw clays in the agalmatolite mine. In the two patients, chest X-ray findings and histopathological findings of the lungs also suggested agalmatolite pneumoconiosis, which was confirmed by mineral analysis of the lungs.

Biological effects of man-made mineral fibers (II)--their genetic damages examined by in vitro assay

In order to study and compare genetic damage induced by 10 kinds of man-made mineral fibers (JFM fibers) in cells, human lung epithelial cells (A549) were exposed to JFM fibers and chrysotile for 1 h, then single-cell gel electrophoresis (SCGE) assay was used to detect DNA strand breaks, DNA-DNA interstrand crosslink and the ability of DNA to repair; The results showed that all 10 JFM fibers could induce DNA strand breaks, DNA-DNA interstrand crosslinks and inhibit the ability of DNA repair. When human embryo lung (HEL) cells were exposed to JFM fibers and chrysotile for 24 h respectively, the chromosomal aberration was analyzed and the results showed that chrysotile and most of JFM fibers at 5.0 micrograms/ml induced structural chromosomal aberration, but all of these effects were lower than that of chrysotile and were different among them, suggesting that 10 types of JFM fibers had genotoxicity with different degree in vitro, but all of them were lower than that of chrysotile.

Acute biological effects of intratracheally instilled titanium dioxide whiskers compared with nonfibrous titanium dioxide and amosite in rats

The dimensions of man-made mineral fiber whiskers are similar to those of some kinds of asbestos. Thus these mineral fibers raise the concern for potential health hazard for workers exposed in the occupational environments. This study was designed to define acute biological effects of intratracheally administered titanium dioxide whiskers (TO1) compared with nonfibrous titanium dioxide (TOP) and UICC amosite (Ams), and their relations to acute lung inflammation in rats. The observed geometric mean length (microm) and width (microm) and geometric standard deviation are: TO1(2.1[2.0], 0.14[1. 53]); Ams (4.3[3.3], 0.31[1.9]); and TOP (50 nm, 1-2 microm aggregates). Ten-week-old Wistar-Jcl male rats received a single tracheal injection of test materials at doses between 0.05 and 1.0 mg/rat. Control animals were injected with the same volume of saline. Lung tissue and bronchoalveolar lavage (BAL) fluid were collected from rats on days 1, 3, and 7 after administration. In the group injected with TO1, total protein, cytokine-induced neutrophil chemoattractant (CINC)/growth-regulated gene product (GRO), interleukin (IL) 1beta, and tumor necrosis factor (TNF) alpha increased on day 1. Subsequently, total elastolytic activity and fucose levels in BAL increased by day 3. All parameters, except for fucose in BAL, recovered to the normal levels. Animals in the Ams group showed increased total protein and CINC/GRO and decreased total elastolytic activity in a dose-dependent manner on day 1. The fucose level increased on day 3 in the Ams group. All parameters returned to their control levels on day 7. Animals in the TOP group did not show significant changes any of parameters during the experimental period. Gene expression of TNF-alpha and monocyte chemoattractant protein (MCP) 3 in the lung increased dose-dependently in the animals treated with the three materials. The mRNAs for eotaxin and MIP-1alpha were overexpressed in the lung of animals treated with Ams and TO1, while RANTES mRNA was overexpressed dose-dependently in the lung of animals treated with Ams on day 1. Onset of inflammatory response was more rapid in the Ams group than the TO1 group. Recovery of the fucose level in BAL was slower in the TO1 group than in the Ams group, though we observed similar histopathological changes in the lung of animals with TO1 or Ams. We conclude that whisker-induced acute biological effects in the lung may be related to the shape of the whiskers and not to their chemical composition or surface crystal structure, showing biological effects similar to those of UICC amosite.

A retrospective cohort study of male workers exposed to PVA fibers

In order to ascertain whether PVA fibers can produce cancer in humans or not, we have conducted a retrospective cohort study of workers exposed to PVA fibers. A total of 447 exposed and 2416 non-exposed male workers who were engaged before 1980 were followed up until the end of 1996. The SMR for all causes was 0.57 (observed 38, 95% CI: 0.41-0.78) for the exposed, and 0.66 (observed 210, 95% CI: 0.58-0.75). As for lung cancer, its SMR was 0.77 (observed 3, 95% CI: 0.15-2.24) for the exposed workers and 0.67 (12 observed, 95% CI: 0.34-1.16) for the non-exposed workers. Lung cancer SMR was 0.86 (observed 2, 95% CI: 0.10-3.11) for the workers with 20 or more years' employment. This study showed no difference in lung cancer risk between the workers exposed to PVA fibers and the non-exposed workers.

Hexavalent chromium responsible for lung lesions induced by intratracheal instillation of chromium fumes in rats

Lung toxicity of chromium fumes (Cr fumes) was examined by a single intratracheal instillation into rats of 10.6 mg and 21.3 mg Cr fumes/kg body weight and by repeated (3 times) instillations of 10.8 mg and 21.7 mg Cr fumes/kg. The pathological changes were compared with those induced by single administrations of 3.2 mg and 19.2 mg Na2CO3 solution-insoluble fraction of Cr fumes (Cr-Fr)/kg and 20.8 mg commercially available chromium (III) oxide powder (Cr (III) oxide)/kg. Single and repeated administrations of Cr fumes suppressed growth rate in a dose-dependent manner, but administrations of Cr-Fr and Cr (III) oxide did not. A single administration of Cr fumes produced granulomas in the entire airways and alveoli with progressive fibrotic changes, as well as severe mobilization and destruction of macrophages and foamy cells. Those histopathological changes were aggravated by the repeated administration of Cr fumes. On the other hand, single administrations of Cr-Fr and Cr (III) oxide produced no remarkable histopathological changes. Cr fumes were found to be composed of 73.5% chromium (III) oxide and 26.5% chromium (VI) oxide. The primary particles of Cr fumes and Cr-Fr were similar, 0.02 micron in size (sigma g: 1.25), and Cr (III) oxide particles were 0.30 micron in size (sigma g: 1.53), measured by analytical electron microscopy (ATEM). Diffuse clusters of the primary particles in Cr fumes were identified as Cr (VI) oxide. The present results suggested that the lung toxicity of Cr fumes was mainly caused by these Cr (VI) oxide (CrO3) particles in Cr fumes.

Biological effects of man-made mineral fibers (I)--Reactive oxygen species production and calcium homeostasis in alveolar macrophages

10 types of standard mineral fiber samples (JFM fibers) were tested for their cytotoxicity in alveolar macrophages (AM) in vitro experiments, in which UICC chrysotile B was used as a positive control. The cytotoxicity included the production of superoxide anion radical and hydrogen peroxide, depletion of glutathione (GSH) and increase of intracellular free calcium. The results showed that chrysotile and most of the 10 mineral fibers could increase the production of superoxide anion and hydrogen peroxide, deplete the concentration of GSH and increase the level of free intracellular Ca2+ in AM. But all the effects of JFM fibers were lower than that induced by UICC chrysotile B. Although the cytotoxicity of JFM fibers were lower than that of asbestos, these mineral fibers should be used with highly care for workers in industries.

Anthophyllite exposure and endemic pleural plaques in Kumamoto, Japan

OBJECTIVES

This study explored the high prevalence of pleural plaques in the town of Matsubase in Kumamoto, Japan.

METHODS

Small-size chest X-ray film was used for screening, and all persons with pleural plaques were confirmed by computed tomography (CT). The prevalence rate of pleural plaques in the 4 districts of Matsubase and its surrounding towns and cities were also examined. The age-adjusted mortality rate for lung cancer in this town was compared with that of its surrounding towns and cities.

RESULTS

Pleural plaques were found in 1357 persons (724 men and 633 women) among the inhabitants who were more than 20 years of age in Matsubase between 1988 and 1993. CT scans ascertained 938 cases with pleural plaques among the 11 14 persons who participated. Thus at least 9.5% of the inhabitants over 20 years of age in this town had pleural plaques. The neighboring towns had a higher rate than the more distant towns. A large-scale open-cast asbestos mine and mill had been in operation in Matsubase between 1883 and 1970. Mineral analysis revealed anthophyllite fibers. Most of the plaques were found in persons who had never worked in the mine or mill.

CONCLUSIONS

The high prevalence of pleural plaques in Matsubase was due to anthophyllite exposure, mainly environmental. No mesotheliomas were found, however. These findings agree with those from an earlier study from Finland.

Fiber numbers per unit weight of JFM standard reference samples determined with a scanning electron microscope. Japan Fibrous Material

A standard reference 10 sample-set of fibrous minerals were prepared by the Japan Fibrous Material Research Association (JFMRA) under the name of JMF standard reference samples. In this paper, the fiber number per unit weight of JFM standard reference samples was determined with a scanning electron microscope. Fiber numbers per unit weight (f/microgram) and standard deviations observed in this experiment were as follows: glass wool (GW1) 7.0 +/- 0.1 x 10(2), rock wool (RW1) 1.7 +/- 0.2 x 10(3), micro glass fiber (MG1) 6.5 +/- 0.4 x 10(4), refractory ceramic fibers; (RF1) 8.8 +/- 0.7 x 10(3), (RF2) 8.7 +/- 0.8 x 10(3), mullite fibers (RF3) 3.5 +/- 0.7 x 10(3), potassium titanate whisker (PT1) 5.9 +/- 0.3 x 10(5), silicon carbide whisker (SC1) 4.1 +/- 0.4 x 10(5), titanium oxide whisker (rutile) (TO1) 6.4 +/- 0.6 x 10(5), and wollastonite (WO1) 2.4 +/- 0.1 x 10(4). Fiber numbers per unit weight would change in proportion to the cube or cube root of the fiber size if the fibers have the same density and the same aspect ratio. JFM standard reference samples should be used taking into consideration the difference in fiber number per unit weight when users conduct in vitro and/or in vivo (injection) biological experiments using these samples.

Differences in the extent of inflammation caused by intratracheal exposure to three ultrafine metals: role of free radicals

Nickel and cobalt, which belong to the same elemental group, are known to cause interstitial lung disease and bronchial asthma. The ability of these metals to injure lung cells and cause inflammation is likely to be important in their pathogenicity but comparative studies are rare. Additionally, ultrafine (uf) forms of these metals are used increasingly and there is little available information on their toxicity. Thus the inflammatory response following intratracheal instillation of ultrafine particles of Co, Ni, and TiO2 was compared. Physiological saline (PS) was used as a vehicle control and DQ12 quartz as a positive control. Male Wistar rats were intratracheally instilled with the 3 particle types at a dose of 1 mg suspended in physiological saline. At 1, 3, 7, 15, and 30 d after the injection, lung weight and the cellular and biochemical changes in bronchoalveolar lavage fluid (BALF) were determined. By all of the indices, Uf-Ni appeared to be the most injurious to the lung, causing severe and sustained inflammation, cytotoxicity and increased epithelial permeability. The next most toxic material was DQ12 quartz, with Uf-Co being closely similar in ability to cause inflammation. Uf-TiO2 was more active than the saline control in all of the indices, but was the least toxic of the particles studied. The present study reveals that three ultrafine particles of the same diameter are dramatically different in their ability to cause inflammation. The three ultrafines were compared as to their ability to cause free-radical damage to supercoiled plasmid DNA, and the result of free-radical activity was found to be Uf-TiO2 << Uf-Co = Uf-Ni. Difference in free-radical-generation activity therefore could underlie the difference in inflammation of these three ultrafine particle types.

Preparation and characteristics of standard reference samples of fibrous minerals for biological experiments

Standard reference samples of fibrous minerals to be used for in vitro and in vivo (injection) biological experiments were prepared. Ten samples were selected from among the fibrous minerals currently used in industry: man-made mineral fibers (MMMF); glass wool (GW1), rock wool (RW1), micro glass fiber (MG1), refractory ceramic fibers (RF1, RF2), and mullite fibers (RF3), whiskers; potassium titanate (PT1), silicon carbide (SC1) and rutile (TlO2)(TO1), and a natural fibrous mineral; wollastonite (WO1). The MMMF samples were prepared by using the size-selective press method. The whisker samples and WO1 were all commercial products. The prepared samples were examined by X-ray diffraction and X-ray fluorescence analyses, and no impurities were identified in any of the samples at a level of 1%, although WO1 was found to have about 5% calcite and a trace amount of quartz (< 1%). The fiber sizes were measured by TEM. The geometric-mean length (micron), width (micron) and SD (in parenthesis) are: GW1 20.0 (2.58), 0.88 (3.10); RW1 16.5 (2.51), 1.80 (2.32); MG1 3.0 (2.22), 0.24 (2.35); RF1 12.0 (2.36), 0.77 (2.53); RF2 11.0 (1.96), 1.10 (2.00); RF3 11.0 (1.75), 2.40 (1.37); PT1 6.0 (2.04), 0.35 (1.51); SC1 6.40 (2.45), 0.30 (1.58); TO1 2.1 (2.00), 0.14 (1.53); WO1 10.5 (2.03), 1.00 (1.72). We concluded that these prepared fiber samples can be safely used for biological experiments. Sample sets containing about one gram of each sample known as JFM standard reference samples are provided by the Japan Fibrous Material Research Association (JFMRA).

Inhibition of arachidonate lipoxygenase activities by 2-(3,4-dihydroxyphenyl)ethanol, a phenolic compound from olives

The effects of olive fruit extract on arachidonic acid lipoxygenase activities were investigated using rat platelets and rat polymorphonuclear leukocytes (PMNL). Olive extract strongly inhibited both 12-lipoxygenase (12-LO) and 5-lipoxygenase (5-LO) activities. One of the compounds responsible for this inhibition was purified and identified as 2-(3,4-dihydroxyphenyl)ethanol (DPE). DPE inhibited platelet 12-LO activity (IC50, 4.2 microM) and PMNL 5-LO activity (IC50, 13 microM) but not cyclooxygenase activity in cell-free conditions. It also inhibited 12-LO activity in intact platelets (IC50, 50 microM) and reduced leukotriene B4 production in intact PMNL stimulated by A23187 (IC50, 26 microM). The inhibition by DPE of both lipoxygenase activities was stronger than that by oleuropein, caffeic acid, or 7 other related phenolic compounds, especially in intact cells. These results suggest that DPE is a potent specific inhibitor of lipoxygenase activities.

Length-reduction method for man-made mineral fibers for biological experiments

A simple fiber length-reduction method was developed to obtain a large amount of fiber samples with different length distributions for use in various biological experiments. This press method is only to press a raw fiber sample charged in a stainless cylinder at an adequate pressure, and is effective for man-made mineral fibers (MMMF) such as glass wool, rock wool and wool and refractory fibers (ceramic fibers, mullite fibers) and some brittle natural mineral fibers such as fibrous brucite and wollastonite. The mean fiber-length of man-made mineral fibers became shorter with the increase in the pressure applied without diameter change. We could obtain a length-reduced fiber sample with a suitable length distribution by this method. This press method is therefore a size-selective method able to produce a large amount of pulverized fiber sample depending on the press cylinder size for biological experiments. A very small amount of non-fibrous particles with aspect ratios (length vs. diameter) of under 3 was seen in the pulverized fiber samples. To eliminate such non-fibrous particles as well as too long fibers from the sample, separation by sedimentation in water was somewhat effective.