Development of a compounded propofol nanoemulsion using multiple non-invasive process analytical technologies

Propofol is the preferred anaesthetic for induction and maintenance of sedation in critically ill mechanically ventilated COVID-19 patients. However, during the outbreak of the COVID-19 pandemic, regular supply chains could not keep up with the sudden increase in global demand, causing drug shortages. Propofol is formulated as an oil-in-water emulsion which is administered intravenously. This study explores the extemporaneous preparation of a propofol emulsion without specialized manufacturing equipment to temporally alleviate such shortages. A commercially available lipid emulsion (IVLE, SMOFlipid 20%), intended for parenteral nutrition, was used to create a propofol loaded nanoemulsion via addition of liquid propofol drug substance and subsequent mixing. Critical quality attributes such as mean droplet size and the volume-weighted percentage of large-diameter (>5µm) droplets were studied. The evolution of droplet size and propofol distribution was monitored in situ and non-destructively, maintaining sterility, using Spatially Resolved Dynamic Light Scattering and Near Infrared Spectroscopy, respectively. Using response surface methodology, an optimum was found for a 4% w/v propofol formulation with a ∼15 minute mixing time in a flask shaker at a 40° shaking angle. This study shows that extemporaneous compounding is a viable option for emergency supply of propofol drug product during global drug shortages.

Preparation and characterization of inorganic radioactive holmium-166 microspheres for internal radionuclide therapy

Microspheres with high specific activities of radionuclides are very interesting for internal radiotherapy treatments. This work focuses on the formulation and characterization of inorganic microspheres with a high content of holmium and therefore a high specific radioactivity of holmium-166. Two novel formulations of inorganic microspheres were obtained by dispersing solid holmium acetylacetonate microspheres (Ho₂(AcAc)₃-ms) in NaH₂PO₄ or NaOH solutions followed by 2 h incubation at room temperature. By exchange of acetylacetonate with phosphate or hydroxyl ions, holmium phosphate microspheres (HoPO₄-ms) and holmium hydroxide microspheres (Ho(OH)₃-ms) were formed respectively. The inorganic microspheres had a significantly smaller diameter (28.5 ± 4.4 μm (HoPO₄-ms) and 25.1 ± 3.5 μm (Ho(OH)₃-ms)) than those of Ho₂(AcAc)₃-ms (32.6 ± 5.2 μm). The weight percentage of holmium-165 in the microspheres increased significantly from 47% (Ho₂(AcAc)₃-ms) to 55% (HoPO₄-ms) and 73% (Ho(OH)₃-ms). After preparation of both HoPO₄-ms and Ho(OH)₃-ms, the stable holmium-165 isotope was partly converted by neutron activation into radioactive holmium-166 to yield radioactive microspheres. High specific activities were achieved ranging from 21.7 to 59.9 MBq/mg (¹⁶⁶HoPO₄-ms) and from 28.8 to 79.9 MBq/mg (¹⁶⁶Ho(OH)₃-ms) depending on the neutron activation time. The structure of both microspheres was preserved up to neutron activations of 6 h in a thermal neutron flux of 4.72 × 10¹⁶ n m^-2 s^-1. After activation, both microspheres revealed excellent stability in administration fluids (saline and phosphate buffer) having less than 0.05% of holmium released after 72 h incubation. Finally, the hemocompatibility of these inorganic microspheres was evaluated and it was shown that the microspheres did cause neither hemolysis nor depletion or inhibition of the coagulation factors of the intrinsic blood coagulation pathway meaning that the microspheres have a good hemocompatibility. Overall, this work shows that radioactive inorganic microspheres with high specific activities of holmium-166 can be prepared which potentially can be used for internal radionuclide therapy.

Assessing bioink shape fidelity to aid material development in 3D bioprinting

During extrusion-based bioprinting, the deposited bioink filaments are subjected to deformations, such as collapse of overhanging filaments, which compromises the ability to stack several layers of bioink, and fusion between adjacent filaments, which compromises the resolution and maintenance of a desired pore structure. When developing new bioinks, approaches to assess their shape fidelity after printing would be beneficial to evaluate the degree of deformation of the deposited filament and to estimate how similar the final printed construct would be to the design. However, shape fidelity has been prevalently assessed qualitatively through visual inspection after printing, hampering the direct comparison of the printability of different bioinks. In this technical note, we propose a quantitative evaluation for shape fidelity of bioinks based on testing the filament collapse on overhanging structures and the filament fusion of parallel printed strands. Both tests were applied on a hydrogel platform based on poloxamer 407 and poly(ethylene glycol) blends, providing a library of hydrogels with different yield stresses. The presented approach is an easy way to assess bioink shape fidelity, applicable to any filament-based bioprinting system and able to quantitatively evaluate this aspect of printability, based on the degree of deformation of the printed filament. In addition, we built a simple theoretical model that relates filament collapse with bioink yield stress. The results of both shape fidelity tests underline the role of yield stress as one of the parameters influencing the printability of a bioink. The presented quantitative evaluation will allow for reproducible comparisons between different bioink platforms.

Overcoming multidrug resistance using folate receptor-targeted and pH-responsive polymeric nanogels containing covalently entrapped doxorubicin

Multidrug resistance (MDR) contributes to failure of chemotherapy. We here show that biodegradable polymeric nanogels are able to overcome MDR via folic acid targeting. The nanogels are based on hydroxyethyl methacrylamide-oligoglycolates-derivatized poly(hydroxyethyl methacrylamide-co-N-(2-azidoethyl)methacrylamide) (p(HEMAm-co-AzEMAm)-Gly-HEMAm), covalently loaded with the chemotherapeutic drug doxorubicin (DOX) and subsequently decorated with a folic acid-PEG conjugate via copper-free click chemistry. pH-Responsive drug release is achieved via the acid-labile hydrazone bond between DOX and the methacrylamide polymeric network. Cellular uptake and cytotoxicity analyses in folate receptor-positive B16F10 melanoma versus folate receptor-negative A549 lung carcinoma cells confirmed specific uptake of the targeted nanogels. Confocal microscopy demonstrated efficient internalization, lysosomal trafficking, drug release and nuclear localization of DOX. We also show that DOX resistance in 4T1 breast cancer cells results in upregulation of the folate receptor, and that folic acid targeted nanogels can be employed to bypass drug efflux pumps, resulting in highly efficient killing of resistant cancer cells. In conclusion, folic acid functionalized nanogels with pH-controlled drug release seem to hold significant potential for treating multidrug resistant malignancies.

Development of a thermosensitive HAMA-containing bio-ink for the fabrication of composite cartilage repair constructs

Fine-tuning of bio-ink composition and material processing parameters is crucial for the development of biomechanically relevant cartilage constructs. This study aims to design and develop cartilage constructs with tunable internal architectures and relevant mechanical properties. More specifically, the potential of methacrylated hyaluronic acid (HAMA) added to thermosensitive hydrogels composed of methacrylated poly[N-(2-hydroxypropyl)methacrylamide mono/dilactate] (pHPMA-lac)/polyethylene glycol (PEG) triblock copolymers, to optimize cartilage-like tissue formation by embedded chondrocytes, and enhance printability was explored. Additionally, co-printing with polycaprolactone (PCL) was performed for mechanical reinforcement. Chondrocyte-laden hydrogels composed of pHPMA-lac-PEG and different concentrations of HAMA (0%-1% w/w) were cultured for 28 d in vitro and subsequently evaluated for the presence of cartilage-like matrix. Young's moduli were determined for hydrogels with the different HAMA concentrations. Additionally, hydrogel/PCL constructs with different internal architectures were co-printed and analyzed for their mechanical properties. The results of this study demonstrated a dose-dependent effect of HAMA concentration on cartilage matrix synthesis by chondrocytes. Glycosaminoglycan (GAG) and collagen type II content increased with intermediate HAMA concentrations (0.25%-0.5%) compared to HAMA-free controls, while a relatively high HAMA concentration (1%) resulted in increased fibrocartilage formation. Young's moduli of generated hydrogel constructs ranged from 14 to 31 kPa and increased with increasing HAMA concentration. The pHPMA-lac-PEG hydrogels with 0.5% HAMA were found to be optimal for cartilage-like tissue formation. Therefore, this hydrogel system was co-printed with PCL to generate porous or solid constructs with different mesh sizes. Young's moduli of these composite constructs were in the range of native cartilage (3.5-4.6 MPa). Interestingly, the co-printing procedure influenced the mechanical properties of the final constructs. These findings are relevant for future bio-ink development, as they demonstrate the importance of selecting proper HAMA concentrations, as well as appropriate print settings and construct designs for optimal cartilage matrix deposition and final mechanical properties of constructs, respectively.

Hydrogel-based reinforcement of 3D bioprinted constructs

Progress within the field of biofabrication is hindered by a lack of suitable hydrogel formulations. Here, we present a novel approach based on a hybrid printing technique to create cellularized 3D printed constructs. The hybrid bioprinting strategy combines a reinforcing gel for mechanical support with a bioink to provide a cytocompatible environment. In comparison with thermoplastics such as [Formula: see text]-polycaprolactone, the hydrogel-based reinforcing gel platform enables printing at cell-friendly temperatures, targets the bioprinting of softer tissues and allows for improved control over degradation kinetics. We prepared amphiphilic macromonomers based on poloxamer that form hydrolysable, covalently cross-linked polymer networks. Dissolved at a concentration of 28.6%w/w in water, it functions as reinforcing gel, while a 5%w/w gelatin-methacryloyl based gel is utilized as bioink. This strategy allows for the creation of complex structures, where the bioink provides a cytocompatible environment for encapsulated cells. Cell viability of equine chondrocytes encapsulated within printed constructs remained largely unaffected by the printing process. The versatility of the system is further demonstrated by the ability to tune the stiffness of printed constructs between 138 and 263 kPa, as well as to tailor the degradation kinetics of the reinforcing gel from several weeks up to more than a year.

Biodegradable microspheres loaded with an anti-Parkinson prodrug: an in vivo pharmacokinetic study

During chronic treatment with L-dopa (LD), Parkinsonian patients often experience uncontrolled motor complications due to fluctuations of the plasmatic levels of LD that result in pulsatile dopaminergic stimulation. To overcome these plasmatic fluctuations, a novel prodrug of LD, L-dopa-α-lipoic acid (LD-LA), has been proposed as a tool for achieving continuous dopaminergic stimulation. Due to slower susceptibility toward enzymatic conversion by LD-degrading enzymes (such as catechol-O-methyltransferase and monoamine oxidase), the plasma half-life of this prodrug is longer than that of LD. Moreover, the higher lipophilicity of LD-LA over LD promotes its delivery to the CNS, where the resulting levels of dopamine (DA) are kept high for a longer time than after equimolar administration of LD. To further reduce fluctuations in plasma levels of LD, LD-LA has been entrapped into biodegradable polymeric microspheres to be used as a depot system with the aim to prevent prodrug degradation and to obtain a sustained release of the intact compound. In the present work, a formulation of LD-LA loaded microspheres (characterized for drug loading, size, morphology, thermal properties, and in vitro prodrug release) has been administered subcutaneously to rats, and the resulting levels of LD and DA in plasma and striatal tissue, respectively, have been monitored. A good correlation between the in vitro release kinetics and the time range during which the formulation alters the LD/DA tissue levels in vivo was observed, suggesting that the polymeric microsphere matrix protects the loaded prodrug from chemical and enzymatic degradation and controls its release. Interestingly, LD-LA microspheres provided sustained levels of DA neurotransmitter in the striatum nucleus for up to 4 days after a single administration. In conclusion, a polymeric microsphere formulation of LD-LA is an attractive medicine for treating Parkinson's disease (PD) symptoms, avoiding motor complications.

Imatinib-ULS-lysozyme: a proximal tubular cell-targeted conjugate of imatinib for the treatment of renal diseases

The anticancer drug imatinib is an inhibitor of the platelet-derived growth factor receptor (PDGFR) kinases, which are involved in the pathogenesis of fibrotic diseases. In the current study we investigated the delivery of imatinib to the proximal tubular cells of the kidneys and evaluated the potential antifibrotic effects of imatinib in tubulointerstitial fibrosis. Coupling of imatinib to the low molecular weight protein lysozyme via the platinum (II)-based linker ULS yielded a 0.8:1 drug-carrier conjugate that rapidly accumulated in the proximal tubular cells upon intravenous and intraperitoneal administration. The bioavailability of intraperitoneally administered imatinib-ULS-lysozyme was 100%. Renal imatinib levels persisted for up to 3 days after a single injection of imatinib-ULS-lysozyme. Compared with an equal dose imatinib mesylate, imatinib-ULS-lysozyme resulted in a 30- and 15-fold higher renal exposure of imatinib, for intravenous and intraperitoneal administration respectively. Imatinib-ULS-lysozyme could not be detected in the heart, which is the organ at risk for side-effects of prolonged treatment with imatinib. The efficacy of imatinib-ULS-lysozyme in the treatment of tubulointerstitial fibrosis was evaluated in the unilateral ureteral obstruction (UUO) model in mice. Three days UUO resulted in all signs of early fibrosis, i.e. an increased deposition of matrix and production of profibrotic factors. Although a moderately increased activity of PDGFR-β was observed, the profibrotic phenotype could not be inhibited with imatinib mesylate or with imatinib-ULS-lysozyme. Further evaluation of imatinib mesylate and imatinib-ULS-lysozyme is therefore warranted in an animal model of renal disease in which the activation of PDGFR-β is more pronounced.

Drug targeting to the kidney: Advances in the active targeting of therapeutics to proximal tubular cells

Activated signaling cascades in the proximal tubular cells of the kidneys play a crucial role in the development of tubulointerstitial fibrosis. Inhibition of these signaling cascades with locally delivered therapeutics is an attractive approach to minimize the risk of unwanted side effects and to enhance their efficacy within the renal tissue. This review describes the potential avenues to actively target drugs to proximal tubular cells by recognition of internalizing receptors and how drug carriers can reach this cell type from either the apical or basolateral side. Important characteristics of drug carrier systems such as size and charge are discussed, as well as linking technologies that have been used for the coupling of drugs to the presented carrier systems. Lastly, we discuss the cellular handling of drugs by proximal tubular cells after their delivery to the kidneys.

Micelles based on HPMA copolymers

Polymeric micelles have been under extensive investigation during the past years as drug delivery systems, particularly for anticancer drugs. They are formed by the self-assembly of amphiphilic block copolymers in aqueous solutions and have a spherical shape and a size in the nano-range (<200nm). Tumor accumulation of polymeric micelles upon intravenous administration can occur as a result of the leaky vasculature of tumor tissue (called the enhanced permeation and retention (EPR) effect).To benefit from the EPR effect, polymeric micelles need to have prolonged circulation times as well as high and stable drug loadings. Poly[N-(2-hydroxypropyl) methacrylamide] (pHPMA) is a hydrophilic polymer currently under investigation for its use in polymer-drug conjugates. Its biocompatibility, non-immunogenicity and the possibility for functionalization are properties that resulted in broad pharmaceutical and biomedical applications, also in the micelle technology research. Being hydrophilic, it can serve as a micellar stealth corona, while it can also be modified with hydrophobic moieties to serve as a micellar core in which hydrophobic drugs can be solubilized and retained. HPMA-based polymeric micelles have been showing very promising in vitro and in vivo results. This review summarizes the applications of pHPMA in the field of polymeric micelles, either serving as a micellar stealth corona, or, if hydrophobically rendered by derivatization, as a micellar core.

Neutron activation of holmium poly(L-lactic acid) microspheres for hepatic arterial radio-embolization: a validation study

Poly(L-lactic acid) microspheres loaded with holmium-166 acetylacetonate (¹⁶⁶Ho-PLLA-MS) are a novel microdevice for intra-arterial radioembolization in patients with unresectable liver malignancies. The neutron activation in a nuclear reactor, in particular the gamma heating, damages the ¹⁶⁶Ho-PLLA-MS. The degree of damage is dependent on the irradiation characteristics and irradiation time in a particular reactor facility. The aim of this study was to standardize and objectively validate the activation procedure in a particular reactor. The methods included light- and scanning electron microscopy (SEM), particle size analysis, differential scanning calorimetry, viscometry, thermal neutron flux measurements and energy deposition calculations. Seven hours-neutron irradiation results in sufficient specific activity of the ¹⁶⁶Ho-PLLA-MS while structural integrity is preserved. Neutron flux measurements and energy deposition calculations are required in the screening of other nuclear reactors. For the evaluation of microsphere quality, light microscopy, SEM and particle size analysis are appropriate techniques.

Microspheres with ultrahigh holmium content for radioablation of malignancies

PURPOSE

The aim of this study was to develop microspheres with an ultra high holmium content which can be neutron activated for radioablation of malignancies. These microspheres are proposed to be delivered selectively through either intratumoral injections into solid tumors or administered via an intravascularly placed catheter.

METHODS

Microspheres were prepared by solvent evaporation, using holmium acetylacetonate (HoAcAc) crystals as the sole ingredient. Microspheres were characterized using light and scanning electron microscopy, coulter counter, titrimetry, infrared and Raman spectroscopy, differential scanning calorimetry, X-ray powder diffraction, magnetic resonance imaging (MRI), and X-ray computed tomography (CT).

RESULTS

Microspheres, thus prepared displayed a smooth surface. The holmium content of the HoAcAc microspheres (44% (w/w)) was higher than the holmium content of the starting material, HoAcAc crystals (33% (w/w)). This was attributed to the loss of acetylacetonate from the HoAcAc complex, during rearrangement of acetylacetonate around the holmium ion. The increase of the holmium content allows for the detection of (sub)microgram amounts of microspheres using MRI and CT.

CONCLUSIONS

HoAcAc microspheres with an ultra-high holmium content were prepared. These microspheres are suitable for radioablation of tumors by intratumoral injections or treatment of liver tumors through transcatheter administration.

The downmodulation of the foreign body reaction by cytomegalovirus encoded interleukin-10

The foreign body reaction (FBR) is of great importance for the function and turnover of biomaterial scaffolds. The development of biological tools that modulate the FBR will augment scaffold functionality and benefit regenerative medicine. The human cytomegalovirus encodes a functional homolog of the potent anti-inflammatory human cytokine interleukin-10 (cmvIL-10). We hypothesized that cmvIL-10 downmodulates the FBR, impairing degradation of biomaterial. We studied the effect of cmvIL-10 on the FBR to subcutaneously implanted hexamethylenediisocyanate-crosslinked dermal sheep collagen (HDSC) discs in rats. CmvIL-10 impaired macrophage influx, vascularization and ingrowth into the discs up to 21 days. It also impaired the formation of giant cells and the degradation of HDSC. At day 10, deposited fibrin fibers were still present in cmvIL-10 discs. Impaired collagenase activity coincided with the impaired HDSC degradation. These results indicate that cmvIL-10 downmodulates the FBR, impairing the progression of the FBR. This study demonstrates the feasibility of interleukin-10 as a biomolecular tool in biomaterials for regenerative medicine.

Degradable PEG-folate coated poly(DMAEA-co-BA)phosphazene-based polyplexes exhibit receptor-specific gene expression

A new cationic biodegradable polyphosphazene was developed, bearing both pendant primary and tertiary amine side groups, poly(2-dimethylaminoethylamine-co-diaminobutane)phosphazene (poly(DMAEA-co-BA)phosphazene). PEG and PEG-folate were coupled to polyplexes based on this poly(DMAEA-co-BA)phosphazene, leading to small (size 100 and 120nm, respectively) and almost neutral particles. In vitro tissue culture experiments showed a low cytotoxicity of both uncoated and coated polyplexes. However, the PEG coated polyplexes showed a 2-fold lower transfection activity in OVCAR 3 cells as compared to the uncoated polyplexes. On the other hand, the PEG-folate coated polyplexes had a 3-fold higher transfection than the PEGylated polyplexes. When free folate was added to the transfection medium, only the transfection activity of the targeted polyplexes was reduced, indicating internalization of the targeted PEG polyplexes via the folate receptor. Confocal laser scanning microscopy confirmed a lower binding and uptake of the PEGylated polyplexes by OVCAR-3 cells when compared to uncoated and folate-PEGylated polyplexes. While uncoated polyplexes induced aggregation of erythrocytes at polymer concentrations of 0.09microg/mL, the PEGylated systems could be incubated at ten times higher concentration before aggregation occurred indicating excellent shielding of the surface charge of the polyplexes by grafting of PEG. In conclusion, the targeted delivery of poly(DMAEA-co-BA)phosphazene bases polyplexes and their improved compatibility with erythrocytes makes them interesting for in vivo applications.

Effect of excipients on the encapsulation efficiency and release of human growth hormone from dextran microspheres

The possibility was investigated to modulate the encapsulation efficiency and release of human growth hormone (hGH) from hydroxyl ethyl methacrylated dextran (dex-HEMA) hydrogel microspheres by using excipients. Microspheres were prepared by polymerization of dex-HEMA in an aqueous two-phase system of this polymer and PEG with or without excipients (Tween 80, pluronic F68, sucrose, NaCl, urea or methionine). High hGH encapsulation efficiencies (50-70%) were obtained for microspheres prepared without excipients and with Tween 80, NaCl or methionine. Substantially lower encapsulation efficiencies (27% and 19%, respectively) were obtained for microspheres prepared in the presence of sucrose and urea, which was attributed to the more favoured partitioning of hGH over the PEG-phase due to higher hydrophobicity of the (partly) denatured hGH. Likely, differences in precipitate size of the encapsulated hGH resulted in different release profiles between microspheres prepared without excipients (biphasic release: 2 days delay time followed by 6 days release) and the release profile for microspheres prepared with Tween 80, pluronic F68, sucrose, NaCl and urea (release over a period of 6-8 days (without a delay time)). Microspheres prepared with methionine showed a concentration-dependent delay time varying from 0 to 2 days followed by almost zero-order release over 6 days, attributed to the effect of methionine on the polymerization of dex-HEMA. Especially, Tween 80 and methionine are attractive excipients since hGH was encapsulated in high yield (60-70%) and the protein was released from the microspheres mainly in its monomeric form without a delay time and with an almost zero-order release over 6-8 days.

Characterization of holmium loaded alginate microspheres for multimodality imaging and therapeutic applications

In this paper the preparation and characterization of holmium-loaded alginate microspheres is described. The rapid development of medical imaging techniques offers new opportunities for the visualisation of (drug-loaded) microparticles. Therefore, suitable imaging agents have to be incorporated into these particles. For this reason, the element holmium was used in this study in order to utilize its unique imaging characteristics. The paramagnetic behaviour of this element allows visualisation with MRI and holmium can also be neutron-activated resulting in the emission of gamma-radiation, allowing visualisation with gamma cameras, and beta-radiation, suitable for therapeutic applications. Almost monodisperse alginate microspheres were obtained by JetCutter technology where alginate droplets of a uniform size were hardened in an aqueous holmium chloride solution. Ho(3+) binds via electrostatic interactions to the carboxylate groups of the alginate polymer and as a result alginate microspheres loaded with holmium were obtained. The microspheres had a mean size of 159 microm and a holmium loading of 1.3 +/- 0.1% (w/w) (corresponding with a holmium content based on dry alginate of 18.3 +/- 0.3% (w/w)). The binding capacity of the alginate polymer for Ho(3+) (expressed in molar amounts) is equal to that for Ca(2+), which is commonly used for the hardening of alginate. This indicates that Ho(3+) has the same binding affinity as Ca(2+). In line herewith, dynamic mechanical analyses demonstrated that alginate gels hardened with Ca(2+) or Ho(3+) had similar viscoelastic properties. The MRI relaxation properties of the microspheres were determined by a MRI phantom experiment, demonstrating a strong R(2)* effect of the particles. Alginate microspheres could also be labelled with radioactive holmium by adding holmium-166 to alginate microspheres, previously hardened with calcium (labelling efficiency 96%). The labelled microspheres had a high radiochemical stability (94% after 48 h incubation in human serum), allowing therapeutic applications for treatment of cancer. The potential in vivo application of the microspheres for a MR-guided renal embolization procedure was illustrated by selective administration of microspheres to the left kidney of a pig. Anatomic MR-imaging showed the presence of holmium-loaded microspheres in the kidney. In conclusion, this study demonstrates that the incorporation of holmium into alginate microspheres allows their visualisation with a gamma camera and MRI. Holmium-loaded alginate microspheres can be used therapeutically for embolization and, when radioactive, for local radiotherapy of tumours.

Triggered destabilisation of polymeric micelles and vesicles by changing polymers polarity: an attractive tool for drug delivery

Polymeric micelles and vesicles have emerged as versatile drug carriers during the past decades. Furthermore, stimuli-responsive systems are developed whose properties change after applying certain external triggers. Therefore, a triggered release of drugs from stimuli-sensitive micelles and vesicles has become an interesting challenge in the pharmaceutical field. Polymeric micelles or vesicles are mainly composed of amphiphilic block copolymers that are held together in water due to strong hydrophobic interactions between the insoluble hydrophobic blocks, thus forming a core-shell or bilayer morphology. Consequently, destabilisation of these assemblies is induced by increasing the polarity of the hydrophobic blocks. Preferably, this process should be the consequence of an external trigger, or take place in a certain time frame or at a specific location. A variety of mechanisms has recently been described to accomplish this transition, which will be reviewed in this paper. These mechanisms include the destabilisation of polymeric micelles and vesicles by temperature, pH, chemical or enzymatic hydrolysis of side chains, oxidation/reduction processes, and light.

Static light scattering and small-angle neutron scattering study on aggregated recombinant gelatin in aqueous solution

Recombinant gelatins are currently evaluated as new excipients for pharmaceutical formulations. They can differ from nonrecombinant gelatins because of intentional alteration of the amino acid sequence and specific properties of the expression systems used. This may affect their solution behavior. In the present work, aqueous solutions of a histidine-containing recombinant gelatin (RG-15-His) were analyzed. Dynamic light scattering (DLS) and loss of absorbance at 200 nm upon centrifugation indicated the formation of aggregates within 1 day upon sample preparation. Static light scattering (SLS) and small-angle neutron scattering (SANS) experiments showed that the aggregate's size was > or =300 nm, and that aggregates are composed of thin, rigid rods of 37 +/- 5 nm in length. The observed aggregation was not detectable by circular dichroism (CD), Fourier transform infrared spectroscopy (FTIR), and cryo transmission electron microscopy (cryo-TEM). SANS experiments, which are not frequently used in the pharmaceutical field, provided additional morphological information about the recombinant gelatin in solution. The results show that combining SLS and SANS is a broadly applicable, complementary approach for detecting aggregation of proteins and other biomolecules and for obtaining structural information about the aggregates.

Removal of chloroform from biodegradable therapeutic microspheres by radiolysis

Radioactive holmium-166 loaded poly(l-lactic acid) microspheres are promising systems for the treatment of liver malignancies. These microspheres are loaded with holmium acetylacetonate (HoAcAc) and prepared by a solvent evaporation method using chloroform. After preparation the microspheres (Ho-PLLA-MS) are activated by neutron irradiation in a nuclear reactor. It was observed that relatively large amounts of residual chloroform (1000-6000 ppm) remained in the microspheres before neutron irradiation. Since it is known that chloroform is susceptible for high-energy radiation, we investigated whether neutron and gamma irradiation could result in the removal of residual chloroform in HoAcAc-loaded and placebo PLLA-MS by radiolysis. To investigate this, microspheres with relatively high and low amounts of residual chloroform were subjected to irradiation. The effect of irradiation on the residual chloroform levels as well as other microsphere characteristics (morphology, size, crystallinity, molecular weight of PLLA and degradation products) were evaluated. No chloroform in the microspheres could be detected after neutron irradiation. This was also seen for gamma irradiation at a dose of 200 kGy phosgene, which can be formed as the result of radiolysis of chloroform, was not detected with gas chromatography-mass spectrometry (GC-MS). A precipitation titration showed that radiolysis of chloroform resulted in the formation of chloride. Gel permeation chromatography and differential scanning calorimetry showed a decrease in molecular weight of PLLA and crystallinity, respectively. However, no differences were observed between irradiated microsphere samples with high and low initial amounts of chloroform. In conclusion, this study demonstrates that neutron and gamma irradiation results in the removal of residual chloroform in PLLA-microspheres.

Production of GMP-grade radioactive holmium loaded poly(L-lactic acid) microspheres for clinical application

Radioactive holmium-166 loaded poly(L-lactic acid) microspheres are promising systems for the treatment of liver malignancies. The microspheres are loaded with holmium acetylacetonate (HoAcAc) and prepared by a solvent evaporation method. After preparation, the microspheres (Ho-PLLA-MS) are activated by neutron irradiation in a nuclear reactor. In this paper, the aspects of the production of a (relatively) large-scale GMP batch (4 g, suitable for treatment of 5-10 patients) of Ho-PLLA-MS are described. The critical steps of the Ho-PLLA-MS production process (sieving procedure, temperature control during evaporation and raw materials) were considered and the pharmaceutical quality of the microspheres was evaluated. The pharmaceutical characteristics (residual solvents, possible bacterial contaminations and endotoxins) of the produced Ho-PLLA-MS batches were in compliance with the requirements of the European Pharmacopoeia. Moreover, neutron irradiated Ho-PLLA-MS retained their morphological integrity and the holmium remained stably associated with the microspheres; it was observed that after 270h (10 times the half-life of Ho-166) only 0.3+/-0.1% of the loading was released from the microspheres in an aqueous solution. In conclusion, Ho-PLLA-MS which are produced as described in this paper, can be clinically applied, with respect to their pharmaceutical quality.

Lanthanide bearing microparticulate systems for multi-modality imaging and targeted therapy of cancer

The rapid developments of high-resolution imaging techniques are offering unique possibilities for the guidance and follow up of recently developed sophisticated anticancer therapies. Advanced biodegradable drug delivery systems, e.g. based on liposomes and polymeric nanoparticles or microparticles, are very effective tools to carry these anticancer agents to their site of action. Elements from the group of lanthanides have very interesting physical characteristics for imaging applications and are the ideal candidates to be co-loaded either in their non-radioactive or radioactive form into these advanced drug delivery systems because of the following reasons: Firstly, they can be used both as magnetic resonance imaging (MRI) and computed tomography (CT) contrast agents and for single photon emission computed tomography (SPECT). Secondly, they can be used for radionuclide therapies which, importantly, can be monitored with SPECT, CT, and MRI. Thirdly, they have a relatively low toxicity, especially when they are complexed to ligands. This review gives a survey of the currently developed lanthanide-loaded microparticulate systems that are under investigation for cancer imaging and/or cancer therapy.

An NLS peptide covalently linked to linear DNA does not enhance transfection efficiency of cationic polymer based gene delivery systems

BACKGROUND

Transfection with non-viral gene delivery vectors, such as cationic polymers, generally results in low transgene expression in vivo. This is likely due to poor cytoplasmic transport and intra-nuclear DNA delivery.

METHODS

In this study two strategies to improve nuclear import were investigated. Linear DNA constructs with or without an NLS peptide were prepared by PCR. Alternatively, linear DNA obtained by enzymatic cleavage followed by capping of both ends with DNA-hairpins was used. An NLS peptide was attached to one of the capped ends of the linear DNA. Both biodegradable (pDMAEAppz) and non-degradable polymers (PEI or pDMAEMA) were used to complex the DNA. Several cell types, dividing and non-dividing, were transfected with the linear DNA constructs containing a SV40-derived NLS peptide. Nuclear import of the DNA constructs was studied using digitonin-permeabilized cells.

RESULTS

Linear DNA prepared by PCR proved not useful as it was degraded from the 3'end. Linear DNA capped with hairpins was more successful with regard to stability. However, Cells transfected with linear DNA constructs by electroporation or by using cationic polymers with linear DNA containing a NLS peptide, failed to show significantly higher luciferase expression levels when compared to cells transfected with plasmid DNA or linear DNA without an NLS peptide attached. No nuclear localization was observed in digitonin-permeabilized cells.

CONCLUSION

Taken together, these data demonstrate that this nuclear localisation signal when attached to DNA is neither able to improve transfection efficiency of cationic polymers nor the nuclear import of the DNA constructs.

Surface characteristics of holmium-loaded poly(L-lactic acid) microspheres

Radioactive holmium-166-loaded poly(L-lactic acid) microspheres (Ho-PLLA-MS) are promising systems for the treatment of liver malignancies. The surface characteristics of Ho-PLLA-MS before and after both neutron and gamma irradiation were investigated in order to get insight into their suspending behaviour and to identify suitable surfactants for clinical application of these systems. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used for surface characterization. The residual amounts of poly(vinyl alcohol) (PVA) of the microspheres, which was used as an emulsifier during the solvent evaporation process, were determined using a colorimetric iodine-borate method and the wettability of microspheres and PLLA films with and without holmium (Ho) loading was tested using suspending experiments and contact angle measurements. XPS showed that the surface of Ho-PLLA-MS mainly consisted of PLLA, less than 10% of the surface was covered with PVA after several washing and sieving steps. A colorimetric assay showed that the microspheres contained 0.2-0.3% (w/w) PVA. Combined with XPS data, this assay demonstrates that the PVA is likely dissolved in the core of the microspheres. XPS analysis also showed that after neutron irradiation, some holmium appeared on the surface. Moreover, Ho-loaded PLLA films had a much higher contact angle (85 degrees) than non-loaded films (70 degrees). Therefore, the Ho on the surface of neutron-irradiated Ho-PLLA-MS is probably the reason for their poor suspending behaviour in saline. No surface changes were seen with XPS after gamma irradiation. Based on their surface characteristics, a pharmaceutically acceptable solvent (1% Pluronic F68 or F127 in 10% ethanol) was formulated with which a homogeneous suspension of radioactive Ho-PLLA-MS could be easily obtained, making these systems feasible for further clinical evaluation.

Effect of polymerization conditions on the network properties of dex-HEMA microspheres and macro-hydrogels

Dextran-hydroxy-ethyl-methacrylate (dex-HEMA) hydrogels in the form of microspheres are an attractive system for the controlled delivery of protein drugs. In this work, the microspheres were prepared by a water-in-water emulsion polymerization process. The polymerization reaction was initiated by potassium peroxodisulfate (KPS) and catalyzed by N,N,N',N'-tetramethylethylenediamine (TEMED). The effect of the initiator concentration, reaction temperature and pH on the mechanical and network properties of the microspheres were investigated. The size and size distribution of the microspheres, equilibrium water content, and methacrylate conversion were also determined. The mechanical properties of single microspheres were measured by a micromanipulation technique and the rheological characteristics of the same material in the form of macroscopic hydrogel slabs were determined by a controlled stress rheometer. The results showed that the Young's moduli of the microspheres and of macroscopic slabs measured by these two methods were in good agreement. Higher KPS initiator concentrations resulted in a more rapid polymerization with a shorter gelation and lag time, and a higher Young's modulus of the gels. An increase in temperature also resulted in a more rapid polymerization with a shorter gelation and lag time. However, the Young's modulus of the gels decreased with an increase in polymerization temperature. The pH had no significant effect on the mechanical properties of the microspheres. This study demonstrates that the network properties of dex-HEMA hydrogels can be tailored by the polymerization conditions, which opens the possibility to modulate the release rate of entrapped compounds.

Biodegradable dextran hydrogels crosslinked by stereocomplex formation for the controlled release of pharmaceutical proteins

Hydrogels are based on hydrophilic polymers, which are crosslinked to prevent dissolution in water. Because hydrogels can contain large amounts of water, they are interesting devices for the delivery of proteins. In this contribution a biodegradable dextran hydrogel is described which is based on physical interactions and is particularly suitable for the controlled delivery of pharmaceutically active proteins. The unique feature of our system is that the preparation of the hydrogels takes place in an all-aqueous solution, by which the use of organic solvents is avoided. Furthermore, chemical crosslinking agents are not needed to create the hydrogels, since crosslinking is established physically by stereocomplex formation between enantiomeric oligomeric lactic acid chains. The hydrogel is simply obtained after mixing aqueous solutions of dextran(l)-lactate and dextran(d)-lactate. In this contribution, the formation of the hydrogels as well as their protein release properties and degradation behavior are discussed.

The effect of the processing and formulation parameters on the size of nanoparticles based on block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) with and without hydrolytically sensitive groups

Block copolymers of poly(ethylene glycol) (PEG) as a hydrophilic block and N-isopropylacrylamide (PNIPAAm) or poly (NIPAAm-co-N-(2-hydroxypropyl) methacrylamide-dilactate) (poly(NIPAAm-co-HPMAm-dilactate)) as a thermosensitive block, are able to self-assemble in water into nanoparticles above the cloud point (CP) of the thermosensitive block. The influence of processing and the formulation parameters on the size of the nanoparticles was studied using dynamic light scattering. PNIPAAm-b-PEG 2000 polymers were not suitable for the formation of small and stable particles. Block copolymers with PEG 5000 and 10000 formed relatively small and stable particles in aqueous solutions at temperatures above the CP of the thermosensitive block. Their size decreased with increasing molecular weight of the thermosensitive block, decreasing polymer concentration and using water instead of phosphate buffered saline as solvent. Extrusion and ultrasonication were inefficient methods to size down the polymeric nanoparticles. The heating rate of the polymer solutions was a dominant factor for the size of the nanoparticles. When an aqueous polymer solution was slowly heated through the CP, rather large particles (> or = 200 nm) were formed. Regardless the polymer composition, small nanoparticles (50-70 nm) with a narrow size distribution were formed, when a small volume of an aqueous polymer solution below the CP was added to a large volume of heated water. In this way the thermosensitive block copolymers rapidly pass their CP ('heat shock' procedure), resulting in small and stable nanoparticles.

Steric stabilization of poly(2-(dimethylamino)ethyl methacrylate)-based polyplexes mediates prolonged circulation and tumor targeting in mice

BACKGROUND

Efficient tumor targeting of polymeric gene transfer systems (polyplexes) represents a major challenge. To establish tumor targeting after intravenous (IV) administration, the circulation lifetime of these systems should be sufficiently long. Since naked polyplexes are rapidly eliminated from the circulation after IV adminstration, strategies have to be developed to improve their pharmacokinetics.

METHODS

Complexes of plasmid DNA and poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA)-graft-PEG or AB di-block copolymers of pDMAEMA and PEG, as well as PEGylated complexes prepared via PEGylation of preformed complexes (postPEGylation), were evaluated for their physicochemical properties (size and charge) their interactions with blood constituents and transfection activity in vitro. The pharmacokinetics and biodistribution of PEG-polyplexes were studied in mice after IV administration. The degree of accumulation in two subcutaneous (SC) mouse tumors after IV administration was evaluated for the system with the longest circulation time.

RESULTS

It is shown that the surface charge of the pDMAEMA-polyplexes was effectively shielded by two PEGylation methods (i.e. the use of pDMAEMA-graft-PEG polymers and postPEGylation). The shielding effect was the highest for the postPEGylation method with PEG(20000), yielding polyplexes that hardly show interactions with blood components (i.e. albumin and erythrocytes) and show substantially prolonged circulation time in mice after IV administration. The superior colloidal stability and circulation kinetics of the postPEGylated polyplexes translated into tumor accumulation which amounted to about 3.5% of the injected dose per gram tumor tissue in a SC Neuro2A tumor model and to about 4.2% of the injected dose per gram tumor tissue in a SC C26 tumor model.

CONCLUSIONS

This study shows that postPEGylation of pDMAEMA-based polyplexes is the most attractive method to prepare polyplexes with long circulating properties. Tumor targeting capacity after intravenous administration was demonstrated in two subcutaneous tumor models.

IL-2 loaded dextran microspheres with attractive histocompatibility properties for local IL-2 cancer therapy

Biodegradable dextran microspheres (MS) were developed as a slow-release system for interleukin-2 (IL-2) to apply them for local IL-2 therapy of cancer. We describe the tissue reactions induced by these MS without or with IL-2 in rats. Dextran MS stain bright red-purple with the periodic acid Schiff (PAS), visualising the exact spot of IL-2 release and its relation to the histological reaction pattern. Subcutaneously injected MS always form a well-circumscribed deposit. In the first 2 days there is a PMN inflammation within the MS-deposit, but the surroundings show only a scanty inflammatory reaction. The PMN reaction is replaced by an abundant macrophage reaction in particular in the MS-deposit. At day 21 a fibrous capsule of about 50 mum surrounds the deposit. The effect of IL-2 administered in its free form is mainly vascular, with vascular dilatation, vascular leakage and oedema. It is remarkable that lymphocytes are present in the injection area already at day 2. When IL-2 releasing MS were used, the various reactions induced by IL-2 and MS were amplified leading to local necrosis. We conclude that neither placebo MS nor IL-2 leads to necrosis after subcutaneous injection in rats. In contrast, when IL-2 was released from MS, then massive necrosis was induced. This might be due to increased phagocytosis or changes in the micro-niche due to the release of humoral factors by the infiltrating cells. This is probably fortuitous for local IL-2 therapy of cancer, as massive necrosis of tumour cells can be expected to lead to an increased antitumour reaction.

Water-soluble biodegradable cationic polyphosphazenes for gene delivery

Polyphosphazenes bearing cationic moieties were synthesized from poly(dichloro)phosphazene, which in turn was obtained by thermal polymerization of hexachlorocyclotriphosphazene in 1,2,4-trichlorobenzene. Next, either 2-dimethylaminoethanol (DMAE) or 2-dimethylaminoethylamine (DMAEA) side groups were introduced by a substitution reaction. The polymers were purified by dialysis against water and tetrahydrofuran, lyophilized and evaluated as polymeric transfectants. The polyphosphazenes were able to bind plasmid DNA yielding positively charged particles (polyplexes) with a size around 80 nm at a polymer/DNA ratio of 3:1 (w/w). The polyphosphazene-based polyplexes were able to transfect COS-7 cells in vitro with an efficiency comparable to a well-known polymeric transfectant [poly(2-dimethylaminoethyl methacrylate), pDMAEMA]. The toxicity of both polyphosphazenes was lower than pDMAEMA. The transfection efficiency for the poly(DMAE)phosphazene-based polyplexes was about threefold higher in the absence of serum than in the presence of 5.0% fetal bovine serum. This is probably caused by unfavorable interactions of the polyplexes with serum proteins. In contrast, the poly(DMAEA)phosphazene-based polyplexes showed a threefold lower transfection activity in the absence of serum. For this system, serum proteins likely masked the toxicity of the polyplexes, as shown by the XTT cell viability assay and confocal laser scanning microscopy studies. Preliminary degradation studies indicate that the polymers were indeed degradable. The half-life at pH 7.5 and 37 degrees C was around 7 days for poly(DMAE)phosphazenes and 24 days for poly(DMAEA)phosphazenes. This study shows that polyphosphazenes are a suitable and promising new class of biodegradable polymeric carriers for gene delivery.

Preparation and characterization of folate-targeted pEG-coated pDMAEMA-based polyplexes

A folate-poly(ethylene glycol) conjugate capable of covalent coupling to primary amines present at the surface of polyplexes was developed. Coating of poly(dimethylaminomethyl methacrylate (pDMAEMA)-based polyplexes with this folate-pEG conjugate led to a sharp decrease of the zeta-potential, and a small increase in particle size. The size of the particles in isotonic medium did not change markedly in time demonstrating that rather stable particles were formed. The in vitro cellular toxicity of the pEGylated polyplexes with and without folate ligands was lowered considerably compared to uncoated polyplexes. The toxicity observed for the targeted pEGylated polyplexes was slightly higher than that of corresponding untargeted polyplexes, which might indicate an increased cellular association of targeted polyplexes. Transfection of OVCAR-3 cells in vitro was markedly increased compared to untargeted pEGylated polyplexes, suggesting targeted gene delivery.

Influence of neutron irradiation on holmium acetylacetonate loaded poly(L-lactic acid) microspheres

Holmium-loaded microspheres are useful systems in radio-embolization therapy of liver metastases. For administration to a patient, the holmium-loaded microspheres have to be irradiated in a nuclear reactor to become radioactive. In this paper. the influence of neutron irradiation on poly(L-lactic acid) (PLLA) microspheres and films, with or without holmium acetylacetonate (HoAcAc), is investigated, in particular using differential scanning calorimetry (MDSC), scanning electron microscopy, gel permeation chromatography (GPC), infrared spectroscopy, and X-ray diffraction. After irradiation of the microspheres, only minor surface changes were seen using scanning electron microscopy, and the holmium complex remained immobilized in the polymer matrix as reflected by a relatively small release of this complex. GPC and MDSC measurements showed a decrease in molecular weight and crystallinity of the PLLA, respectively, which can be ascribed to radiation induced chain scission. Irradiation of the HoAcAc loaded PLLA matrices resulted in evaporation of the non-coordinated and one coordinated water molecule of the HoAcAc complex, as evidenced by MDSC and X-ray diffraction analysis. Infrared spectroscopy indicated that some degradation of the acetylacetonate anion occurred after irradiation. Although some radiation induced damage of both the PLLA matrix and the embedded HoAcAc-complex occurs, the microspheres retain their favourable properties (no marginal release of Ho, preservation of the microsphere size), which make these systems interesting candidates for the treatment of tumours by radio-embolization.

Pore sizes in hydrated dextran microspheres

The average pore size of hydrated dextran microspheres is derived from rheological and protein release data. The microspheres were prepared by cross-linking an aqueous solution of methacrylated dextran emulsified in a continuous poly(ethylene glycol) phase. The rheological data were obtained using a novel micromanipulation technique, which enables the compression of a single microsphere. The so obtained pseudoelasticity moduli of the microspheres were derived from these compression data and corresponded well with the elasticity moduli of macroscopic hydrogels of the same composition, as determined with dynamic mechanical analysis. The modulus increased with decreasing water contents of the microspheres and with increasing degrees of methacrylate substitution of the dextran used. Furthermore, the average pore sizes calculated from the pseudoelasticity moduli were in good agreement with the pore sizes derived from protein release data. In conclusion, this study shows that micromanipulation provides insight into the average pore sizes of dextran microspheres, which is an important characteristic that will modulate the release of encapsulated proteins.

Novel crosslinking methods to design hydrogels

Hydrogels are presently under investigation as matrices for the controlled release of bioactive molecules, in particular pharmaceutical proteins, and for the encapsulation of living cells. For these applications, it is often required that the gels degrade under physiological conditions. This means that the originally three-dimensional structure has to disintegrate preferably in harmless products to ensure a good biocompatibility of the hydrogel. In this overview, different chemical and physical crosslinking methods used for the design of biodegradable hydrogels are summarized and discussed. Chemical crosslinking is a highly versatile method to create hydrogels with good mechanical stability. However, the crosslinking agents used are often toxic compounds, which have been extracted from the gels before they can be applied. Moreover, crosslinking agents can give unwanted reactions with the bioactive substances present in the hydrogel matrix. Such adverse effects are avoided with the use of physically crosslinked gels.

Release of recombinant human interleukin-2 from dextran-based hydrogels

In this study, the release of recombinant human interleukin-2 (rhIL-2) from methacrylated dextran (dex-MA) and (lactate-)hydroxyethyl methacrylated dextran (dex-(lactate-)HEMA) hydrogels with varying crosslink density was investigated. Hydrogels derived from dex-MA are stable under physiological conditions (pH 7 and 37 degrees C), whereas dex-HEMA and dex-lactate-HEMA hydrogels degrade due to the presence of hydrolytically sensitive esters in the crosslinks of the gels. The protein release profiles both the non-degradable and degradable dextran-based hydrogels showed that with increasing crosslink density of the gel, the release of rhIL-2 decreases. From dex-MA hydrogels with an initial water content above 70%, the rhIL-2 release followed Fickian diffusion, whereas from gels with an initial water content of 70% or lower the protein was fully entrapped in the hydrogel meshes. In contrast with non-degradable dex-MA hydrogels, degradable dex-lactate-HEMA gels with comparable network characteristics (degree of methacrylate substitution and initial water content) showed an almost zero-order, degradation controlled release of rhIL-2 in a time period of 5-15 days. This paper demonstrates that the release of rhIL-2 from non-degradable dex-MA and degradable dex-lactate-HEMA gels can be modulated by the crosslink density and/or the degradation characteristics of the hydrogel. Importantly, rhIL-2 was mainly released as monomer from the hydrogels and with good retention of its biological activity.

Advances in nuclear oncology: microspheres for internal radionuclide therapy of liver tumours

Liver metastases cause the majority of deaths from colorectal cancer, and response to chemotherapy and external radiotherapy is poor. An alternative is internal radionuclide therapy using (90)Y labeled microspheres. These microspheres are very stable and have a proven efficacy in the field of treatment of primary or metastatic hepatic cancer. Whilst these glass spheres showed encouraging results in patients, their high density is a serious drawback. Currently, other materials with lower densities and other radioisotopes are being investigated in order to optimize this promising new therapy. Three major radiolabeled microsphere materials, viz. glass, resin-based and polymer-based, are now available for therapy or are being tested in animals. In this review the preparation, stability and degradation of these spheres are discussed.

On the release of proteins from degrading dextran methacrylate hydrogels and the correlation with the rheologic properties of the hydrogels

PURPOSE

To study the release of macromolecules of different sizes (bovine serum albumin, immunoglobulin G) from degrading (addition of dextranase) dextran methacrylate (dex-MA) hydrogels and to correlate the release with the evolution of the rehologic properties of the hydrogels during degradation.

METHODS

The size of the macromolecules, the degree of substitution (i.e., number of methacrylates per 100 glycopyranose residues) of the dex-MA and the dextranase concentration in the hydrogels was varied. The rheologic properties were measured with a controlled stress rheometer.

RESULTS

The release from dex-MA hydrogels without dextranase was very small [7-20% (time frame up to 180 days)] showing that most of the molecules were entrapped within the hydrogel network. The release from degrading dex-MA hydrogels followed zero-order kinetics for all molecules during a substantial period of the release. This was explained by a liberation and an increasing diffusivity of the proteins in the course of the degradation. The total amount released and the release rates could be well correlated with the rheologically observed degradation rates.

CONCLUSIONS

It was shown that rheology can be a useful tool to help explain the release from degrading hydrogels.

Characterization of poly(L-lactic acid) microspheres loaded with holmium acetylacetonate

Holmium-loaded PLLA microspheres are useful systems in radioembolization therapy of liver metastases because of their low density, biodegradability and favourable radiation characteristics. Neutron activated Ho-loaded microspheres showed a surprisingly low release of the relatively small holmium complex. In this paper factors responsible for this behaviour are investigated, in particular by the use of differential scanning calorimetry, scanning electron microscopy, infrared spectroscopy and X-ray diffraction. The holmium complex is soluble in PLLA up to 8% in films and 17% in microspheres. Interactions between carbonyl groups of PLLA, and the Ho-ion in the HoAcAc complex, explain very satisfactorily the high stability of holmium-loaded microspheres.

Fourier transform infrared spectrometric analysis of protein conformation: effect of sampling method and stress factors

Changes in the amide bands in Fourier transform infrared spectra of proteins are generally attributed to alterations in protein secondary structure. In this study spectra of five different globular proteins were compared in the solid and solution states recorded with several sampling techniques. Spectral differences for each protein were observed between the various sampling techniques and physical states, which could not all be explained by a change in protein secondary structure. For example, lyophilization in the absence of lyoprotectants caused spectral changes that could (partially) have been caused by the removal of hydrating water molecules rather than secondary structural changes. Moreover, attenuated total reflectance spectra of proteins in H2O were not directly comparable to transmission spectra due to the anomalous dispersion effect. Our study also revealed that the amide I, II, and III bands differ in their sensitivities to changes in protein conformation: For example, strong bands in the region 1620-1630 and 1685-1695 cm(-1) were seen in the amide I region of aggregated protein spectra. Surprisingly, absorbance of such magnitudes was not observed in the amide II and III region. It appears, therefore, that only the amide I can be used to distinguish between intra- and intermolecular beta-sheet formation. Considering the differing sensitivity of the different amide modes to structural changes, it is advisable to utilize not only the amide I band, but also the amide II and III bands, to determine changes in protein secondary structure. Finally, it is important to realize that changes in these bands may not always correspond to secondary structural changes of the proteins.

Tumour embolization of the Vx2 rabbit head and neck cancer model with Dextran hydrogel and Holmium-poly(L-lactic acid) microspheres: a radionuclide and histological pilot study

INTRODUCTION

Intra-arterial embolization of unresectable malignant tumours with biodegradable microspheres is an effective way of selective anti-tumour therapy. Promising candidates are Dextran hydrogel (Dex) microspheres for chemo-embolization and Holmium-166 poly(L-lactic acid) (166HoPLA) microspheres for radio-embolization. This study was performed to investigate the distribution of intra-arterially injected microspheres both in vivo and histologically in order to establish an optimal size of particles for embolization of head and neck tumours.

MATERIAL

Twenty rabbits with Vx2 auricular tumours were embolized via the caudal auricular artery with 4 different batches of microspheres: Radioactive (166)HoPLA microspheres sieved between 20 and 50 microm and Dextran hydrogel microspheres sieved between 20 and 100 microm (Dex20), 30 and 100 microm (Dex30) or 50 and 100 microm (Dex50). Dex20 and Dex50 microspheres were labelled with 99mTechnetium in six cases.

METHODS

The average particle size of the microspheres was determined. The proportion of microspheres entrapped in the tumour was measured with a gamma camera. The distribution of microspheres around the primary tumour and spill of particles over into lungs or other organs was analysed from histological sections.

RESULTS

The mean particle diameter varied from 19 to 66 microm: (166)HoPLA 19+/-11 microm, Dex20 40+/-19 microm, Dex30 50+/-19 microm, Dex50 66+/-21 microm. The 19 microm(166)HoPLA particles proved inadequate for embolization as 51% spilled over into the lungs, whereas over 95% of the 40-66 microm Dex microspheres were retained within the primary tumour area. Particle density in lung tissues proved significantly lower for the Dex50 group. Stray emboli to the brain occurred in two rabbits.

CONCLUSION

The results of this investigation show that both Dextran hydrogel and holmium-166 poly(L-lactic acid) microspheres are potential candidates for embolization of head and neck cancer. In future studies, arterio-arteriolar anastomoses which might confound treatment should be identified and occluded. Particles with a number weighted mean diameter of at least 40 microm and a volume weighted mean size up to 70 microm should be used.

Oxidation of recombinant human interleukin-2 by potassium peroxodisulfate

PURPOSE

The oxidation of recombinant human interleukin-2 (rhlL-2) by potassium peroxodisulfate (KPS) with or without N,N,N',N'-tetramethylethylenediamine (TEMED), which are used for the preparation of dextran-based hydrogels, was investigated.

METHODS

The oxidation of (derivatives of) methionine. tryptophan, histidine and tyrosine, as well as rhlL-2 was investigated. Both the oxidation kinetics (RP-HPLC) and the nature of the oxidation products (mass spectrometry) were studied as a function of the KPS and TEMED concentration, and the presence of a competitive antioxidant, methionine.

RESULTS

Under conditions relevant for the preparation of rhIL-2 loaded hydrogels, only methionine and tryptophan derivatives were susceptible to oxidation by KPS. The oxidation of these compounds was inhibited once TEMED was present, suggesting that the peroxodisulfate anion, rather than the radicals formed in the presence of TEMED, is the oxidative species. KPS only induced oxidation of the four methionines present in rhIL-2, whereas the tryptophan residue remained unaffected. The radicals, formed after KPS decomposition by TEMED, induced some dimerization of rhIL-2. The oxidation of rhIL-2 could be substantially reduced by the addition of methionine, or by pre-incubation of KPS with TEMED.

CONCLUSIONS

Only the methionine residues in rhlL-2 are oxidized by KPS. The extent of oxidation can be minimized by a proper selection of the reaction conditions.

A comparative biocompatibility study of microspheres based on crosslinked dextran or poly(lactic-co-glycolic)acid after subcutaneous injection in rats

Microspheres based on methacrylated dextran (dex-MA), dextran derivatized with lactate-hydroxyethyl methacrylate (dex-lactate-HEMA) or derivatized with HEMA (dex-HEMA) were prepared. The microspheres were injected subcutaneously in rats and the effect of the particle size and network characteristics [initial water content and degree of methacrylate substitution (DS)] on the tissue reaction was investigated for 6 weeks. As a control, poly(lactic-co-glycolic)acid (PLGA) microspheres with varying sizes (unsized, smaller than 10 microm, smaller and larger than 20 microm) were injected as well. A mild tissue reaction to the PLGA microspheres was observed, characterized by infiltration of macrophages (MØs) and some granulocytes. Six weeks postinjection, the PLGA microspheres were still present. However, their size was decreased indicating degradation and many spheres had been phagocytosed. The tissue reaction was hardly affected by size differences, except for particles smaller than 10 microm, which induced an extensive tissue reaction. The initial tissue reaction to nondegradable dex-MA microspheres was stronger than towards the PLGA microspheres, but at day 10 the tissue reactions were comparable for both groups. Six weeks postinjection, the dex-MA microspheres were completely phagocytosed, and no signs of degradation were observed. The size and initial water content of dex-MA microspheres hardly affected the tissue response, although less granulocytes were observed for microspheres with higher DS. Slowly degrading dextran microspheres composed of dex-(lactate(1)-)HEMA induced a tissue reaction comparable to the PLGA microspheres. However, degradation of the dex-(lactate(1,3)-)HEMA microspheres was associated with an increased number of MØ's and giant cells, both phagocytosing the microspheres and their degradation products. Similar to PLGA, no adverse reactions were observed for the nondegradable dex-MA and degradable dextran microspheres. This study shows that both nondegradable and degradable dextran-based microspheres are well tolerated after subcutaneous injection in rats, which make them interesting candidates as controlled drug delivery systems.

Formation of dextran hydrogels by crystallization

In this paper, a novel method is presented for the preparation of dextran hydrogels and microspheres, based on crystallization. Although dextrans are known to be well soluble in water, precipitation was observed in concentrated aqueous solutions of low molecular weight dextran (dextran 6000), whereas for solutions of dextran with higher molecular weights (dextran 40,000 and 220,000) no precipitation was observed in the time-frame studied. The kinetics of the precipitation process were studied and showed that precipitation was faster when more concentrated dextran solutions were used. Furthermore, the precipitation process was accelerated by stirring and by the presence of salts. Depending on the precipitation time, microspheres or gels were obtained. The precipitates were insoluble in water at room temperature, but readily dissolved in boiling water or DMSO. IR spectroscopy and (modulated) differential scanning calorimetry ((M)DSC) demonstrated that the precipitates were crystalline. We hypothesize that crystallization is due to association of the chains through hydrogen bonding, induced by the large polymer/water ratio in concentrated dextran 6000 solutions.

In vitro biocompatibility of biodegradable dextran-based hydrogels tested with human fibroblasts

The cytotoxicity of dextran T40, methacrylated dextran (dex-MA) and hydroxyethyl-methacrylated dextran (dex-HEMA), dextran-based hydrogel discs and microspheres, and their degradation products, was studied by measuring the cell proliferation inhibition index (CPII) on human fibroblasts in vitro. In addition, during the 72 h incubation period light-microscopic observations were performed daily. After 24 h of incubation with dextran and dex-HEMA polymers, the cells showed elongated or spider-like forms, some lipid droplets and intracellular granula, indicative of pinocytosis and internalization of the polymers. During the next two days, the fibroblasts' appearance did not change. Methacrylic acid (MAA), formed by hydrolysis of dex-HEMA, did not influence the cell morphology. Dex-HEMA polymer solutions with a low and high degree of substitution (DS) at 100 mg/ml caused a CPII of 30-40% after 72 h. This is less than 10% growth inhibition per cell cycle and statistically not different from the CPII induced by 100 mg/ml dextran T40. Growth inhibition induced by MAA was also low. The various dex-MA hydrogel discs caused similar low growth inhibition. Interestingly, hydrogel microspheres of dex-MA and dex-(lactate-)HEMA caused a CPII of only 0-20% after 72 h. The results presented in this study demonstrate that methacrylate-derivatized dextran hydrogels show good biocompatibility in vitro making these degradable biomaterials promising systems for drug delivery purposes.

Lipid-coated polyplexes for targeted gene delivery to ovarian carcinoma cells

A nonviral gene delivery vector has been developed in our laboratory based on the cationic polymer, poly(2-(dimethylethylamino)ethyl methacrylate) (p(DMAEMA)). p(DMAEMA)-based polyplexes have been successfully used for the transfection of OVCAR-3 cells in vitro. However, these polyplexes were unable to transfect OVCAR-3 cells growing in the peritoneal cavity of nude mice after intraperitoneal administration, which could be ascribed to inactivation by components (including hyaluronic acid) present in the tumor ascitic fluid. The present work aimed at (a) protecting p(DMAEMA)-based polyplexes against destabilization or inactivation by polyanions such as hyaluronic acid present in tumor ascitic fluid and (b) enhancing cellular uptake of the protected p(DMAEMA)-based polyplexes by targeting with antibody Fab' fragments. To fulfill these requirements, we have developed a detergent removal method to coat polyplexes with anionic lipids. With this method, spherical particles of approximately 125 nm, which were protected from destabilization by polyanions, were obtained. More importantly, the transfection efficiency of lipopolyplexes was unaffected in the presence of hyaluronic acid, indicating that lipid coating of polyplexes protects against destabilization by hyaluronic acid. By conjugating antibody Fab' fragments directed against the epithelial glycoprotein-2 to the lipidic surface of these lipopolyplexes, target cell-specific transfection of OVCAR-3 cells could be obtained in vitro.

Targeting of liver tumour in rats by selective delivery of holmium-166 loaded microspheres: a biodistribution study

Intra-arterial administration of beta-emitting particles that become trapped in the vascular bed of a tumour and remain there while delivering high doses, represents a unique approach in the treatment of both primary and metastatic liver tumours. Studies on selective internal radiation therapy of colorectal liver metastases using yttrium-90 glass microspheres have shown encouraging results. This study describes the biodistribution of 40-microm poly lactic acid microspheres loaded with radioactive holmium-166, after intra-arterial administration into the hepatic artery of rats with implanted liver tumours. Radioactivity measurements showed >95% retention of injected activity in the liver and its resident tumour. The average activity detected in other tissues was < or =0.1%ID/g, with incidental exceptions in the lungs and stomach. Very little 166Ho activity was detected in kidneys (<0.1%ID/g), thereby indicating the stability of the microspheres in vivo. Tumour targeting was very effective, with a mean tumour to liver ratio of 6. 1+/-2.9 for rats with tumour (n=15) versus 0.7+/-0.5 for control rats (n=6; P<0.001). These ratios were not significantly affected by the use of adrenaline. Histological analysis showed that five times as many large (>10) and medium-sized (4-9) clusters of microspheres were present within tumour and peritumoural tissue, compared with normal liver. Single microspheres were equally dispersed throughout the tumour, as well as normal liver parenchyma.