A Compact Broadside Coupled Stripline 2-D Beamforming Network and Its Application to a 2-D Beam Scanning Array Antenna Using Panasonic Megtron 6 Substrate

This article presents a 4-way 2-D butler matrix (BM)-based beamforming network (BFN) using a multilayer substrate broadside coupled stripline (BCS). To achieve the characteristics of a compact, wide-bandwidth, high-gain phased array, a BCS coupler is implemented using the Megtron 6 substrate. The compact 2-D BFN is formed by combining planarly two horizontal BCS couplers and two vertical BCS couplers. The BFN is proposed without a crossover and without a phase shifter, generating phase responses of ±90° in the x- and y-directions, respectively. The proposed BFN exhibits a wide operating band of 66.7% (3-7 GHz) and a compact physical area of just 0.25 λ0 × 0.25 λ0 × 0.04 λ0. The planar 2-D BFN is easily integrated with the patch antenna radiation elements to construct a 2-D multibeam array antenna that generates four fixed beams, one in each quadrant, at an elevation angle of 30° from the broadside to the array axis when the element separation is 0.6 λ0. The physical area of the 2-D multibeam array antenna is just 0.8 λ0 × 0.8 λ0 × 0.04 λ0. The prototypes of the BCS coupler, the 2-D BFN, and the 2-D multibeam array antenna were fabricated and measured. The measured and simulated results were in good agreement. A gain of 9.1 to 9.9 dBi was measured.

Low-Noise Amplifier with Bypass for 5G New Radio Frequency n77 Band and n79 Band in Radio Frequency Silicon on Insulator Complementary Metal-Oxide Semiconductor Technology

This paper presents the design of a low-noise amplifier (LNA) with a bypass mode for the n77/79 bands in 5G New Radio (NR). The proposed LNA integrates internal matching networks for both input and output, combining two LNAs for the n77 and n79 bands into a single chip. Additionally, a bypass mode is integrated to accommodate the flexible operation of the receiving system in response to varying input signal levels. For each frequency band, we designed a low-noise amplifier for the n77 band to expand the bandwidth to 900 MHz (3.3 GHz to 4.2 GHz) using resistive-capacitance (RC) feedback and series inductive-peaking techniques. For the n79 band, only the RC feedback technique was employed to optimize the performance of the LNA for its 600 MHz bandwidth (4.4 GHz to 5.0 GHz). Because wideband techniques can lead to a trade-off between gain and noise, causing potential degradation in noise performance, appropriate bandwidth design becomes crucial. The designed n77 band low-noise amplifier achieved a simulated gain of 22.6 dB and a noise figure of 1.7 dB. Similarly, the n79 band exhibited a gain of 21.1 dB and a noise figure of 1.5 dB with a current consumption of 10 mA at a 1.2 supply voltage. The bypass mode was designed with S21 of -3.7 dB and -5.0 dB for n77 and n79, respectively.

Eight-Element Dual-Band Multiple-Input Multiple-Output Mobile Phone Antenna for 5G and Wireless Local Area Network Applications

This paper proposes an eight-element dual-band multiple-input multiple-output (MIMO) antenna that operates in the fifth generation (5G), n78 (3400-3600 MHz), and WLAN (5275-5850 MHz) bands to accommodate the usage scenarios of 5G mobile phones. The eight antenna elements are printed on two long frames, which significantly reduce the usage of the internal space of the mobile phone. Each antenna element is printed on both surfaces of one frame, which consists of a radiator on the internal surface and a defected ground plane on the outer surface. The radiator is a rectangular ring fed by a 50 Ω microstrip line which is printed on the top surface of the system board. A parasitic unit is printed on the outer surface of each frame, which is composed of an inverted H-shaped and four L-shaped patches. Each parasitic unit is connected to the internal surface of the frames through a via, and then it is connected to a 1.5 mm wide microstrip line on the top surface of the system board, which is connected to the ground plane on the bottom surface of the system board by a via. Four L-shaped slots, four rectangular slots, and four U-shaped slots are etched onto the system board, which provides good isolation between the antenna elements. Two merged rectangular rings are printed on the center of each frame, which improves the isolation further. The return loss is better than 6 dB, and the isolation between the units is better than 15 dB in the required working frequency bands. In addition, the use of a defected ground structure not only makes the antenna element obtain better isolation but also improves the overall working efficiency. The measurement results show that the proposed MIMO antenna structure can be an ideal solution for 5G and WLAN applications.

Frequency-Selective Surface-Based MIMO Antenna Array for 5G Millimeter-Wave Applications

In this paper, a radiating element consisting of a modified circular patch is proposed for MIMO arrays for 5G millimeter-wave applications. The radiating elements in the proposed 2 × 2 MIMO antenna array are orthogonally configured relative to each other to mitigate mutual coupling that would otherwise degrade the performance of the MIMO system. The MIMO array was fabricated on Rogers RT/Duroid high-frequency substrate with a dielectric constant of 2.2, a thickness of 0.8 mm, and a loss tangent of 0.0009. The individual antenna in the array has a measured impedance bandwidth of 1.6 GHz from 27.25 to 28.85 GHz for S11 ≤ -10 dB, and the MIMO array has a gain of 7.2 dBi at 28 GHz with inter radiator isolation greater than 26 dB. The gain of the MIMO array was increased by introducing frequency-selective surface (FSS) consisting of 7 × 7 array of unit cells comprising rectangular C-shaped resonators, with one embedded inside the other with a central crisscross slotted patch. With the FSS, the gain of the MIMO array increased to 8.6 dBi at 28 GHz. The radiation from the array is directional and perpendicular to the plain of the MIMO array. Owing to the low coupling between the radiating elements in the MIMO array, its Envelope Correlation Coefficient (ECC) is less than 0.002, and its diversity gain (DG) is better than 9.99 dB in the 5G operating band centered at 28 GHz between 26.5 GHz and 29.5 GHz.

A Multimode 28 GHz CMOS Fully Differential Beamforming IC for Phased Array Transceivers

A 28 GHz fully differential eight-channel beamforming IC (BFIC) with multimode operations is implemented in 65 nm CMOS technology for use in phased array transceivers. The BFIC has an adjustable gain and phase control on each channel to achieve fine beam steering and beam pattern. The BFIC has eight differential beamforming channels each consisting of the two-stage bi-directional amplifier with a precise gain control circuit, a six-bit phase shifter, a three-bit digital step attenuator, and a tuning bit for amplitude and phase variation compensation. The Tx and Rx mode overall gains of the differential eight-channel BFIC are around 11 dB and 9 dB, respectively, at 27.0-29.5 GHz. The return losses of the Tx mode and Rx mode are >10 dB at 27.0-29.5 GHz. The maximum phase of 354° with a phase resolution of 5.6° and the maximum attenuation of 31 dB, including the gain control bits with an attenuation resolution of 1 dB, is achieved at 27.0-29.5 GHz. The root mean square (RMS) phase and amplitude errors are <3.2° and <0.6 dB at 27.0-29.5 GHz, respectively. The chip size is 3.0 × 3.5 mm², including pads, and Tx mode current consumption is 580 mA at 2.5 V supply voltage.

A Comparative Analysis of Doherty and Outphasing MMIC GaN Power Amplifiers for 5G Applications

A comparison between a fully integrated Doherty power amplifier (DPA) and outphasing power amplifier (OPA) for fifth Generation (5G) wireless communications is presented in this paper. Both amplifiers are integrated using pHEMT transistors from the OMMIC's 100 nm GaN-on-Si technology (D01GH). After a theoretical analysis, the design and layout of both circuits are presented. The DPA uses an asymmetric configuration where the main amplifier is biased in class AB and the auxiliary amplifier is biased in class C, while the OPA uses two amplifiers biased in class B. In the comparative analysis, it has been observed that the OPA presents a better performance in terms of maximum power added efficiency (PAE), while the DPA provides higher linearity and efficiency at 7.5 dB output back-off (OBO). At a 1 dB compression point, the OPA exhibits an output power of 33 dBm with a maximum PAE of 58.3% compared to 44.2% for the DPA for an output power of 35 dBm, and at 7.5 dB OBO, the DPA achieves a PAE of 38.5%, while the OPA achieves 26.1%. The area has been optimized using absorbing adjacent component techniques, resulting in an area of 3.26 mm² for the DPA and 3.18 mm² for the OPA.

A Survey on Handover and Mobility Management in 5G HetNets: Current State, Challenges, and Future Directions

Fifth-generation (5G) networks offer high-speed data transmission with low latency, increased base station volume, improved quality of service (QoS), and massive multiple-input-multiple-output (M-MIMO) channels compared to 4G long-term evolution (LTE) networks. However, the COVID-19 pandemic has disrupted the achievement of mobility and handover (HO) in 5G networks due to significant changes in intelligent devices and high-definition (HD) multimedia applications. Consequently, the current cellular network faces challenges in propagating high-capacity data with improved speed, QoS, latency, and efficient HO and mobility management. This comprehensive survey paper specifically focuses on HO and mobility management issues within 5G heterogeneous networks (HetNets). The paper thoroughly examines the existing literature and investigates key performance indicators (KPIs) and solutions for HO and mobility-related challenges while considering applied standards. Additionally, it evaluates the performance of current models in addressing HO and mobility management issues, taking into account factors such as energy efficiency, reliability, latency, and scalability. Finally, this paper identifies significant challenges associated with HO and mobility management in existing research models and provides detailed evaluations of their solutions along with recommendations for future research.

Design and Modelling of Graphene-Based Flexible 5G Antenna for Next-Generation Wearable Head Imaging Systems

Arguably, 5G and next-generation technology with its key features (specifically, supporting high data rates and high mobility platforms) make it valuable for coping with the emerging needs of medical healthcare. A 5G-enabled portable device receives the sensitive detection signals from the head imaging system and transmits them over the 5G network for real-time monitoring, analysis, and storage purposes. In terms of material, graphene-based flexible electronics have become very popular for wearable and healthcare devices due to their exceptional mechanical strength, thermal stability, high electrical conductivity, and biocompatibility. A graphene-based flexible antenna for data communication from wearable head imaging devices over a 5G network was designed and modelled. The antenna operated at the 34.5 GHz range and was designed using an 18 µm thin graphene film for the conductive radiative patch and ground with electric conductivity of 3.5 × 10⁵ S/m. The radiative patch was designed in a fractal fashion to provide sufficient antenna flexibility for wearable uses. The patch was designed over a 1.5 mm thick flexible polyamide substrate that made the design suitable for wearable applications. This paper presented the 3D modelling and analysis of the 5G flexible antenna for communication in a digital care-home model. The analyses were carried out based on the antenna's reflection coefficient, gain, radiation pattern, and power balance. The time-domain signal analysis was carried out between the two antennas to mimic real-time communication in wearable devices.

Design of 4 × 4 Low-Profile Antenna Array for CubeSat Applications

This paper presents a low-profile microstrip antenna with high gain for fifth-generation (5G) CubeSat applications. The proposed design consists of 16 miniaturized patch antennas distributed in a uniform 4 × 4 topology with a feeding network on Rogers TMM10 substrate. The antenna array was simulated in CST Studio Suite^® software and fabricated for performance testing on the CubeSat structure. The prototype works perfectly from 3.46 GHz to 3.54 GHz. The simulated and measurement results reveal remarkable performance. The design obtained a measured gain of 8.03 dBi and a reflection coefficient of -17.4 dB at the center frequency of 3.5 GHz. Due to its reduced dimensions of 10 × 10 cm, this design is an excellent alternative for mounting on a CubeSat structure as it combines efficient performance with a low profile.

Mobility-Aware Offloading Decision for Multi-Access Edge Computing in 5G Networks

Multi-access edge computing (MEC) is a key technology in the fifth generation (5G) of mobile networks. MEC optimizes communication and computation resources by hosting the application process close to the user equipment (UE) in network edges. The key characteristics of MEC are its ultra-low latency response and real-time applications in emerging 5G networks. However, one of the main challenges in MEC-enabled 5G networks is that MEC servers are distributed within the ultra-dense network. Hence, it is an issue to manage user mobility within ultra-dense MEC coverage, which causes frequent handover. In this study, our purposed algorithms include the handover cost while having optimum offloading decisions. The contribution of this research is to choose optimum parameters in optimization function while considering handover, delay, and energy costs. In this study, it assumed that the upcoming future tasks are unknown and online task offloading (TO) decisions are considered. Generally, two scenarios are considered. In the first one, called the online UE-BS algorithm, the users have both user-side and base station-side (BS) information. Because the BS information is available, it is possible to calculate the optimum BS for offloading and there would be no handover. However, in the second one, called the BS-learning algorithm, the users only have user-side information. This means the users need to learn time and energy costs throughout the observation and select optimum BS based on it. In the results section, we compare our proposed algorithm with recently published literature. Additionally, to evaluate the performance it is compared with the optimum offline solution and two baseline scenarios. The simulation results indicate that the proposed methods outperform the overall system performance.

Handover Parameters Optimisation Techniques in 5G Networks

The massive growth of mobile users will spread to significant numbers of small cells for the Fifth Generation (5G) mobile network, which will overlap the fourth generation (4G) network. A tremendous increase in handover (HO) scenarios and HO rates will occur. Ensuring stable and reliable connection through the mobility of user equipment (UE) will become a major problem in future mobile networks. This problem will be magnified with the use of suboptimal handover control parameter (HCP) settings, which can be configured manually or automatically. Therefore, the aim of this study is to investigate the impact of different HCP settings on the performance of 5G network. Several system scenarios are proposed and investigated based on different HCP settings and mobile speed scenarios. The different mobile speeds are expected to demonstrate the influence of many proposed system scenarios on 5G network execution. We conducted simulations utilizing MATLAB software and its related tools. Evaluation comparisons were performed in terms of handover probability (HOP), ping-pong handover probability (PPHP) and outage probability (OP). The 5G network framework has been employed to evaluate the proposed system scenarios used. The simulation results reveal that there is a trade-off in the results obtained from various systems. The use of lower HCP settings provides noticeable enhancements compared to higher HCP settings in terms of OP. Simultaneously, the use of lower HCP settings provides noticeable drawbacks compared to higher HCP settings in terms of high PPHP for all scenarios of mobile speed. The simulation results show that medium HCP settings may be the acceptable solution if one of these systems is applied. This study emphasises the application of automatic self-optimisation (ASO) functions as the best solution that considers user experience.

LTCC-Integrated Dielectric Resonant Antenna Array for 5G Applications

A millimeter-wave dielectric resonator antenna array with an integrated feeding network and a novel alignment superstrate in Low Temperature Cofired Ceramics (LTCC) technology is presented. The antenna array consists of 16 cylindrical DR antenna (CDRA) elements operating at 28 GHz for mm-Wave 5G applications. The array is fed by an inverted microstrip corporate feeding network designed and built in the same LTCC stack as the resonators. A grooved and grounded superstrate is introduced to facilitate the alignment of the individual array elements while enhancing the overall performance of the antenna array. The performance of the proposed stack is evaluated numerically and compared with measured data. Measured results show an impedance bandwidth of 9.81% at 28.72 GHz with a maximum realized gain of 15.68 dBi and an efficiency of 88%, and are in excellent agreement with simulations.

Electrically Parallel Three-Element 980 nm VCSEL Arrays with Ternary and Binary Bottom DBR Mirror Layers

To meet the performance goals of fifth generation (5G) and future sixth generation (6G) optical wireless communication (OWC) and sensing systems, we seek to develop low-cost, reliable, compact lasers capable of sourcing 5-20 Gb/s (ideally up to 100 Gb/s by the 2030s) infrared beams across free-space line-of-sight distances of meters to kilometers. Toward this end, we develop small arrays of electrically parallel vertical cavity surface emitting lasers (VCSELs) for possible future use in short-distance (tens of meters) free-space optical communication and sensing applications in, for example, homes, data centers, manufacturing spaces, and backhaul (pole-to-pole or pole-to-building) optical links. As a starting point, we design, grow by metal-organic vapor phase epitaxy, fabricate, test, and analyze 980 nm top-emitting triple VCSEL arrays. Via on-wafer high-frequency probe testing, our arrays exhibit record bandwidths of 20-25 GHz, optical output powers of 20-50 mW, and error-free data transmission at up to 40 Gb/s-all extremely well suited for the intended 5G short-reach OWC and sensing applications. We employ novel p-metal and top mesa inter-VCSEL connectors to form electrically parallel but optically uncoupled (to reduce speckle) arrays with performance exceeding that of single VCSELs with equal total emitting areas.