1
|
Improving the Barrier and Mechanical Properties of Paper Used for Packing Applications with Renewable Hydrophobic Coatings Derived from Camelina Oil. ACS OMEGA 2024; 9:19786-19795. [PMID: 38737020 PMCID: PMC11080016 DOI: 10.1021/acsomega.3c07213] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/20/2023] [Revised: 01/24/2024] [Accepted: 02/08/2024] [Indexed: 05/14/2024]
Abstract
This study looked at using modified camelina oil to develop sustainable coatings that could replace those derived from petroleum-based materials for use in packaging and other industrial sectors. Solvent-free synthesis of maleic anhydride grafted camelina oil (MCO) was carried out at two different temperatures (200 and 230 °C) to obtain sustainable hydrophobic coating materials for paper substrates. Maleic anhydride grafting of camelina oil was confirmed with attenuated total reflectance-Fourier transform infrared and NMR spectroscopic techniques, and up to 16% grafting of maleic anhydride was achieved, as determined by the titration method. MCO, obtained at different reaction temperatures, was coated onto cellulosic paper and evaluated for its hydrophobicity, mechanical, oxygen, and water vapor barrier properties. Scanning electron microscopy indicated the homogeneous dispersion of coating material onto the paper substrate. MCO-coated papers (MCO-200C paper and MCO-230C paper) provided a water contact angle of above 90° which indicates that the modified oil was working as a hydrophobic coating. Water vapor permeability (WVP) testing of coated papers revealed a reduction in WVP of up to 94% in comparison to the uncoated paper. Moreover, an improved oxygen barrier property was also observed for paper coated with both types of MCO. Analysis of the mechanical properties showed a greater than 70% retention of tensile strength and up to a five-fold increase in elongation at break of coated versus uncoated papers. Overall, the results show that camelina oil, a renewable resource, can be modified to produce environmentally friendly hydrophobic coating materials with improved mechanical and water vapor barrier properties that can serve as a potential coating material in the packaging industry. The results of this research could find applications in the huge paper packaging industries, specially in food packaging.
Collapse
|
2
|
Upcycling of post-industrial starch-based thermoplastics and their talc-filled sustainable biocomposites for single-use plastic alternative. Int J Biol Macromol 2023; 253:126751. [PMID: 37678682 DOI: 10.1016/j.ijbiomac.2023.126751] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2023] [Revised: 08/13/2023] [Accepted: 09/04/2023] [Indexed: 09/09/2023]
Abstract
This study utilized post-industrial wheat starch (biological macromolecule) for the development of poly(butylene adipate-co-terephthalate) (PBAT) based thermoplastic starch blend (TPS) and biocomposite films. PBAT (70 wt%) was blended with plasticized post-industrial wheat starch (PPWS) (30 wt%) and reinforced with talc master batch (MB) (25 wt%) using a two-step process, consisting of compounding the blend for pellet preparation, followed by the cast film extrusion at 160 °C. The effect of the chain extender was analyzed at compounding temperatures of 160 and 180 °C for talc-based composites. The incorporation of talc MB has increased the thermal stability of the biocomposites due to the nucleating effect of talc. Moreover, tensile strength and Young's modulus increased by about 5 and 517 %, respectively as compared with the TPS blend film without talc MB. Thermal, rheological, and morphological analyses confirmed that the use of talc in the presence of chain extender at a processing temperature of 160 °C has resulted in an enhanced dispersion of talc and chain entanglement with PBAT and PPWS than PBAT/PPWS blend and PBAT/PPWS/Talc composite films. On the other hand, at 180 °C, the talc-containing biocomposite with chain extender tended to form PPWS agglomerates, thereby weakening its material properties.
Collapse
|
3
|
Recent progress on biodegradable polylactic acid based blends and their biocomposites: A comprehensive review. Int J Biol Macromol 2023; 253:126231. [PMID: 37567528 DOI: 10.1016/j.ijbiomac.2023.126231] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2023] [Revised: 08/02/2023] [Accepted: 08/06/2023] [Indexed: 08/13/2023]
Abstract
Being less dependent on non-renewable resources as well as protecting the environment from waste streams have become two critical primers for a global movement toward replacing conventional plastics with renewable and biodegradable polymers. Despite all these efforts, only a few biodegradable polymers have paved their way successfully into the market. Polylactic acid is one of these biodegradable polymers that has been investigated thoroughly by researchers as well as manufactured on a large industrial scale. It is synthesized from lactic acid obtained mainly from the biological fermentation of carbohydrates, which makes this material a renewable polymer. Besides its renewability, it benefits from some attractive mechanical performances including high strength and stiffness, though brittleness is a major drawback of this biopolymer. Accordingly, the development of blends and biocomposites based on polylactic acid with highly flexible biodegradable polymers, specifically poly(butylene adipate co terephthalate) has been the objective of many investigations recently. This paper focuses on the blends and biocomposites based on these two biopolymers, specifically their mechanical, rheological, and biodegradation, the main characteristics that are crucial for being considered as a biodegradable substitution for conventional non-biodegradable polymers.
Collapse
|
4
|
Bioremediation as an emerging technology for the removal of synthetic microplastic pollutants from marine ecosystem. MARINE POLLUTION BULLETIN 2023; 194:115297. [PMID: 37487338 DOI: 10.1016/j.marpolbul.2023.115297] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/26/2023]
|
5
|
A Review on the Challenges and Choices for Food Waste Valorization: Environmental and Economic Impacts. ACS ENVIRONMENTAL AU 2023; 3:58-75. [PMID: 36941850 PMCID: PMC10021016 DOI: 10.1021/acsenvironau.2c00050] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Revised: 12/08/2022] [Accepted: 12/09/2022] [Indexed: 01/22/2023]
Abstract
Valorization of food waste (FW) is instrumental for reducing the environmental and economic burden of FW and transitioning to a circular economy. The FW valorization process has widely been studied to produce various end-use products and summarize them; however, their economic, environmental, and social aspects are limited. This study synthesizes some of the valorization methods used for FW management and produces value-added products for various applications, and also discusses the technological advances and their environmental, economic, and social aspects. Globally, 1.3 billion tonnes of edible food is lost or wasted each year, during which about 3.3 billion tonnes of greenhouse gas is emitted. The environmental (-347 to 2969 kg CO2 equiv/tonne FW) and economic (-100 to $138/tonne FW) impacts of FW depend on the multiple parameters of food chains and waste management systems. Although enormous efforts are underway to reduce FW as well as valorize unavoidable FW to reduce environmental and economic loss, it seems the transdisciplinary approach/initiative would be essential to minimize FW as well as abate the environmental impacts of FW. A joint effort from stakeholders is the key to reducing FW and the efficient and effective valorization of FW to improve its sustainability. However, any initiative in reducing food waste should consider a broader sustainability check to avoid risks to investment and the environment.
Collapse
|
6
|
Silane treated starch dispersed PBAT/PHBV-based composites: Improved barrier performance for single-use plastic alternatives. Int J Biol Macromol 2023; 229:1009-1022. [PMID: 36549624 DOI: 10.1016/j.ijbiomac.2022.12.141] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2022] [Revised: 12/05/2022] [Accepted: 12/14/2022] [Indexed: 12/23/2022]
Abstract
The objective of this study is to include 5 wt% silane-treated starch (S-t-Starch) into biodegradable flexible poly(butylene adipate-co-terephthalate) (PBAT)/poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend matrix, which can facilitate superior barrier and balanced mechanical properties. With the intension of improving compatibilization between matrix and filler, starch (biological macromolecule) was efficiently treated with 15 wt% of 3-glycidoxypropyl trimethoxy silane (GPTMS), a coupling agent. Various analyses such as barrier, mechanical, thermal, surface morphology and rheological were performed using cast extruded PBAT/PHBV-based composite films. Comprehensive characterizations suggested that cast extruded PBAT/PHBV with 5 wt% S-t-Starch composites exhibited 91 and 82 % improvement in oxygen and water vapor barrier, respectively, compared to PBAT film. The increment in % crystallinity (as supported by DSC analysis) of PBAT/PHBV/5%S-t-Starch composite due to the silane component was one of the reasons for barrier improvement. The other reason was the improved interfacial adhesion between matrix and S-t-Starch particles (as supported by SEM analysis), which restricted the mobility of the polymer chains. The elongation at break (%EB) of the cast extruded PBAT/PHBV/5%Starch film was slightly improved from 536 to 542 % after silane treatment. Hence, the developed polymer composite in this research work can contribute to flexible packaging applications that require improved barrier properties.
Collapse
|
7
|
Morphology and Performance Relationship Studies on Poly(3-hydroxybutyrate- co-3-hydroxyvalerate)/Poly(butylene adipate- co-terephthalate)-Based Biodegradable Blends. ACS OMEGA 2023; 8:1946-1956. [PMID: 36687037 PMCID: PMC9850484 DOI: 10.1021/acsomega.2c04770] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Accepted: 11/17/2022] [Indexed: 06/17/2023]
Abstract
Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/poly(butylene adipate-co-terephthalate) (PBAT) blends hold great potential for use in sustainable packaging applications for their advanced performance. Understanding the structure-property relationship in the blends at various proportions is significantly important for their future application, which is addressed in this work. The study found that the inherent brittleness of PHBV can only be modified with the addition of 50 wt % PBAT, where co-continuous structures formed in the blend as revealed by scanning electron microscopy (SEM) analysis. The elongation at break (%) of the blends increased from 3.81 (30% PBAT) to 138.5% (50% PBAT) and 345.3% (70 wt % PBAT), respectively. The fibrous structures of the PBAT formed during breaking are beneficial for energy dissipation, which greatly increased the toughness of the blends. Both the SEM observation and glass-transition temperature study by dynamic mechanical analysis indicated that the PHBV and PBAT are naturally immiscible. However, by simply mixing the two polymers with different composition ratios, the properties including melt flow index, heat deflection temperature, and mechanical properties can be tailored for different processing methods and applications. Our research work herein illustrates the fundamental structure-property relationship in this popular blend of PHBV/PBAT, aiming to guide the future modification direction in improving their properties and realizing their commercial applications in different scenarios.
Collapse
|
8
|
Biodegradable blends from bacterial biopolyester PHBV and bio-based PBSA: Study of the effect of chain extender on the thermal, mechanical and morphological properties. Int J Biol Macromol 2023; 225:1291-1305. [PMID: 36423810 DOI: 10.1016/j.ijbiomac.2022.11.188] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/19/2022] [Revised: 11/14/2022] [Accepted: 11/18/2022] [Indexed: 11/23/2022]
Abstract
Being aware of the global problem of plastic pollution, our society is claiming new bioplastics to replace conventional polymers. Balancing their mechanical performance is required to increase their presence in the market. Brittleness of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was attempted to be decreased by melt blending with flexible starch-based poly(butylene succinate-co-butylene adipate) (PBSA). An epoxy-functionalized chain extender was used to enhance interaction between both immiscible biopolyesters. Mechanical performance, morphology, rheology, and crystallization behavior of injection-molded PHBV-PBSA blends (70-30, 50-50, and 30-70 wt%) were assessed in the presence and absence of the chain extender. Crystallization of PHBV was hindered, which was reflected in the improvement of mechanical properties. When PBSA >50 %, the homogeneity of results increased within the same sample while for PHBV-PBSA 70-30 wt% the elongation was 45 % higher. During the flexural test, it changed from brittle to non-breakable. The additive did not change the type of morphology developed by each blend nor the toughening mechanisms, so impact strength was barely affected. However, it reduced the size of dispersed phase domains due to a viscosity change, improving their processability. The higher the PHBV in the blend, the higher the effect of the chain extender.
Collapse
|
9
|
Valorization of camelina oil to biobased materials and biofuels for new industrial uses: a review. RSC Adv 2022; 12:27230-27245. [PMID: 36321163 PMCID: PMC9535402 DOI: 10.1039/d2ra03253h] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2022] [Accepted: 09/08/2022] [Indexed: 11/16/2022] Open
Abstract
Global environmental pollution is a growing concern, especially the release of carbon dioxide from the use of petroleum derived materials which negatively impacts our environment's natural greenhouse gas level. Extensive efforts have been made to explore the conversion of renewable raw materials (vegetable oils) into bio-based products with similar or enhanced properties to those derived from petroleum. However, these edible plant oils, commonly used for human food consumption, are often not suitable raw materials for industrial applications. Hence, there is an increasing interest in exploring the use of non-edible plant oils for industrial applications. One such emerging oil seed crop is Camelina sativa, generally known as camelina, which has limited use as a food oil and so is currently being explored as a feedstock for various industrial applications in both Europe and North America. Camelina oil is highly unsaturated, making it an ideal potential AGH feedstock for the manufacture of lower carbon footprint, biobased products that reduce our dependency on petroleum resources and thus help to combat climate change. This review presents a brief description of camelina highlighting its composition and its production in comparison with traditional plant oils. The main focus is to summarize recent data on valorization of camelina oil by various chemical means, with specific emphasis on their industrial applications in biofuels, adhesives and coatings, biopolymers and bio-composites, alkyd resins, cosmetics, and agriculture. The review concludes with a discussion on current challenges and future opportunities of camelina oil valorization into various industrial products.
Collapse
|
10
|
Polyphthalamide polymers: A review on synthesis, properties, and advance manufacturing and emerging applications. J Appl Polym Sci 2022. [DOI: 10.1002/app.52965] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
11
|
Upcycling of Plastic Wastes and Biomass for Sustainable Graphitic Carbon Production: A Critical Review. ACS ENVIRONMENTAL AU 2022; 2:510-522. [PMID: 36411867 PMCID: PMC9673229 DOI: 10.1021/acsenvironau.2c00029] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/26/2022] [Revised: 08/01/2022] [Accepted: 08/01/2022] [Indexed: 12/04/2022]
Abstract
![]()
Upcycling of waste plastics diverts plastics from landfill,
which
helps in reducing greenhouse gas emissions. Graphitic carbon is an
interesting material with a wide range of applications in electronics,
energy storage, fuel cells, and even as advanced fillers for polymer
composites. It is a very strong and highly conductive material consisting
of weakly bound graphene layers arranged in a hexagonal structure.
There are different ways of synthesizing graphitic carbons, of which
the co-pyrolysis of biomass and plastic wastes is a promising approach
for large-scale production. Highly graphitized carbon with surface
areas in the range of 201 m2/g was produced from the co-pyrolysis
of polyethylene and pinewood at 600 °C. Similarly, porous carbon
having a superior discharge capacity (290 mAh/g) was developed from
the co-pyrolysis of sugar cane and plastic polymers with catalysts.
The addition of plastic wastes including polyethylene and high-density
polyethylene to the pyrolysis of biomass tends to increase the surface
area and improve the discharge capacity of the produced graphitic
carbons. Likewise, temperature plays an important role in enhancing
the carbon content and thereby the quality of the graphitic carbon
during the co-pyrolysis process. The application of metal catalysts
can reduce the graphitization temperature while at the same time improve
the quality of the graphitic carbon by increasing the carbon contents.
This work reports some typical graphitic carbon preparation methods
from the co-pyrolysis of biomass and plastic wastes for the first
time including thermochemical methods, exfoliation methods, template-based
production methods, and salt-based methods. The factors affecting
the graphitic char quality during the conversion processes are reviewed
critically. Moreover, the current state-of-the-art characterization
technologies such as Raman, scanning electron microscopy, high-resolution
transmission electron microscopy, and X-ray photoelectron spectroscopy
are discussed in detail, and finally, an overview on the applications,
scalability, and future trends of graphitic-like carbons is highlighted.
Collapse
|
12
|
Curcumin induces thermotolerance by reducing oxidative stress, apoptosis, and inflammation in buffalo mammary epithelial cells under heat shock conditions. J Reprod Immunol 2022; 153:103684. [DOI: 10.1016/j.jri.2022.103684] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2022] [Revised: 07/20/2022] [Accepted: 08/01/2022] [Indexed: 10/16/2022]
|
13
|
Studies on curing kinetics of polyphenylene sulfide: An insight into effects of curing temperature and time on structure and
thermo‐mechanical
behavior. J Appl Polym Sci 2022. [DOI: 10.1002/app.51817] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
14
|
Value-Added Bio-carbon Production through the Slow Pyrolysis of Waste Bio-oil: Fundamental Studies on Their Structure-Property-Processing Co-relation. ACS OMEGA 2022; 7:1612-1627. [PMID: 35071857 PMCID: PMC8772303 DOI: 10.1021/acsomega.1c01743] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2021] [Accepted: 10/21/2021] [Indexed: 05/08/2023]
Abstract
The present work addresses the transformation of bio-oil into valuable biocarbon through slow pyrolysis. The biocarbons produced at three different temperatures (400, 600, and 900 °C), 10 °C min-1 heating rate, and 30 min holding time were tested for their surface morphology, thermal stability, elemental composition, functionality, particle size, and thermal and electrical conductivity. The physicochemical study of bio-oil showed substantial carbon content, higher heating value, and lower nitrogen content. Also, the Thermogravimetric analyzer-FourierTransform Infrared Spectroscopy (TGA-FTIR) study of bio-oil confirmed that the majority of gases released were hydrocarbons, carbonyl products, ethers, CO, and CO2, with a minor percentage of water and alcohol. Overall, it was found that the pyrolysis temperature has the dominant role in the yield and properties of biocarbon. The physicochemical characterization of biocarbon showed that the higher temperature based pyrolyzed biocarbon (600 and 900 °C) improved the properties in terms of thermal stability, thermal conductivity, graphitic content, ash content, and carbon content. Furthermore, the elemental and Energy-Dispersive Spectroscopy study of biocarbon confirmed the substantial depletion in oxygen and hydrogen at a higher temperature (600 and 900 °C) than the lower temperature based pyrolyzed biocarbon (400 °C). Additionally, the purest form of the biocarbon is found at a higher temperature (900 °C) with higher thermal stability and carbon content. The study of the surface morphology of biocarbon revealed that the higher temperature (600 and 900 °C) biocarbon showed larger and harder particles than the lower temperature biocarbon (400 °C); however, the electrical conductivity of biocarbon decreased, whereas thermal conductivity increased, with an increase in the pyrolysis temperatures. Moreover, the particle size analysis of biocarbon confirmed that most of the particles were found in the range of 1 μm. The increased thermal stability, carbon content, and graphitic content and the lower ash content endorse biocarbon as an excellent feedstock for carbon-based energy storage materials.
Collapse
|
15
|
Distribution, annual committed effective dose, and health safety assessment of 210Po in marine biota from Kalpakkam coast, Bay of Bengal. MARINE POLLUTION BULLETIN 2021; 173:113147. [PMID: 34808544 DOI: 10.1016/j.marpolbul.2021.113147] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/02/2021] [Revised: 11/10/2021] [Accepted: 11/11/2021] [Indexed: 06/13/2023]
Abstract
Seafood, intertidal biota, beach sediment, and seawater from Kalpakkam coast, Bay of Bengal were analyzed for 210Po to evaluate the internal exposure and other radiological safety aspects. Kalpakkam houses various nuclear power generation facilities on its coast. The activity concentration of 210Po was more pronounced in the intertidal organisms. Pelagic planktivorous fishes have the highest activity of the non-technogenic radionuclide, followed by the detrital feeders, benthic planktivores, benthic carnivores, and pelagic carnivore fishes. The affinity of 210Po to organic detrital matter and planktonic organisms has led to a higher accumulation of radionuclide in planktivorous fishes. Activity concentration of 210Po in seafood ranged between 1.13 ± 0.3 and 96.71 ± 1.6 Bq kg-1 (Becquerel/kilogram). In seaweeds and gastropods, it ranged from 2.09 ± 0.2 to 8.21 ± 0.6 and from 9.31 ± 0.7 to 21.58 ± 1.2 Bq kg-1, respectively. The committed effective dose (CED) of 210Po in seafood varied from 31.18 to 456.68 μSv yr-1 (microSievert/year). Radiological hazard parameters, such as activity intake, CED in consumption, of the seafood from this coast are within the acceptable levels prescribed by the International Commission on Radiological Protection and US Environmental Protection Agency.
Collapse
|
16
|
Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective. RSC Adv 2021; 11:36398-36438. [PMID: 35494368 PMCID: PMC9043570 DOI: 10.1039/d1ra04060j] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2021] [Accepted: 10/09/2021] [Indexed: 12/12/2022] Open
Abstract
The worldwide demand for additive manufacturing (AM) is increasing due to its ability to produce more challenging customized objects based on the process parameters for engineering applications. The processing of conventional materials by AM processes is a critically demanded research stream, which has generated a path-breaking scenario in the rapid manufacturing and upcycling of plastics. The exponential growth of AM in the worldwide polymer market is expected to exceed 20 billion US dollars by 2021 in areas of automotive, medical, aerospace, energy and customized consumer products. The development of functional polymers and composites by 3D printing-based technologies has been explored significantly due to its cost-effective, easier integration into customized geometries, higher efficacy, higher precision, freedom of material utilization as compared to traditional injection molding, and thermoforming techniques. Since polymers are the most explored class of materials in AM to overcome the limitations, this review describes the latest research conducted on petroleum-based polymers and their composites using various AM techniques such as fused filament fabrication (FFF), selective laser sintering (SLS), and stereolithography (SLA) related to 3D printing in engineering applications such as biomedical, automotive, aerospace and electronics.
Collapse
|
17
|
Statistical Design of Biocarbon Reinforced Sustainable Composites from Blends of Polyphthalamide (PPA) and Polyamide 4,10 (PA410). Molecules 2021; 26:5387. [PMID: 34500821 PMCID: PMC8434084 DOI: 10.3390/molecules26175387] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2021] [Revised: 08/24/2021] [Accepted: 08/27/2021] [Indexed: 11/16/2022] Open
Abstract
A full factorial design with four factors (the ratio of polyphthalamide (PPA) and polyamide 4,10 (PA410) in the polymer matrix, content percent of biocarbon (BioC), the temperature at which it was pyrolyzed and the presence of a chain extender (CE)), each factor with two levels (high and low), was carried out to optimize the mechanical properties of the resulting composites. After applying a linear model, changes in tensile strength, elongation at break and impact energy were not statistically significant within the considered material space, while the ones in the flexural modulus, the tensile modulus, density and heat deflection temperature (HDT) were. The two most influential factors were the content of BioC and its pyrolysis temperature, followed by the content of PPA. The affinity of PPA with a high-temperature biocarbon and the affinity of PA410 with a lower-temperature biocarbon, appear to explain the mechanical properties of the resulting composites. The study also revealed that the addition of CE hindered the mechanical properties. By maximizing the flexural modulus, tensile modulus and HDT, while minimizing the density, the optimal composite predicted is an 80 [PPA:PA410 (25:75)] wt% polymer composite, with 20 wt% of a BioC, pyrolyzed at a calculated 823 °C.
Collapse
|
18
|
Impacts of COVID-19 Outbreak on the Municipal Solid Waste Management: Now and beyond the Pandemic. ACS ENVIRONMENTAL AU 2021; 1:32-45. [PMID: 37155478 PMCID: PMC8525346 DOI: 10.1021/acsenvironau.1c00005] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
Abstract
![]()
The COVID-19 pandemic disrupted the municipal essential services, including municipal
solid waste (MSW) management. This study has reviewed the literature on MSW and solid
medical waste (SMW) management systems, waste management initiatives specific to this
pandemic, as well as their impacts now and beyond. Waste segregation and separate
treatment of waste streams play important roles in reducing the environmental, health,
and social impacts of waste and waste management. The global warming potential of MSW
and SMW were found to be varied from −0.64 to 520 kg CO2 equiv/tonne
and −52.1 to 3730 kg CO2 equiv/tonne, respectively, which widely
depend on the sterilization and disposal processes. Similarly, MSW and SMW disposal
costs varied from 90 to $242/tonne and 12 to $1530.0/tonne, respectively. Various
changes made to waste collection and management because of the COVID-19 pandemic
affected waste segregation and recycling. Since the start of the pandemic, various
sectors, including the food, waste management, and healthcare sectors, relied on the
increased use of single-use plastics to prevent transmission of COVID-19. An
environmentally friendly alternative (biodegradable/compostable) to widely used
single-use plastics is desired for easing waste management problems. Although various
initiatives are underway to manage growing volumes of MSW and SMW, while controlling the
spreading of infectious diseases, the movable grate incineration technology coupled with
an adequate disinfection process presents a potential solution in managing the COVID-19
waste challenges. The proper disinfection method and technological choices can mitigate
the risk of spreading infections and can improve the waste management system’s
sustainability, especially the contaminated waste.
Collapse
|
19
|
Green Composites from a Bioplastic Blend of Poly(3-hyroxybutyrate- co-3-hydroxyvalerate) and Carbon Dioxide-Derived Poly(propylene carbonate) and Filled with a Corn Ethanol-Industry Co-product. ACS OMEGA 2021; 6:20103-20111. [PMID: 34395963 PMCID: PMC8358941 DOI: 10.1021/acsomega.1c00763] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/10/2021] [Accepted: 04/20/2021] [Indexed: 06/13/2023]
Abstract
Sustainable green composites were engineered from distillers' dried grains with solubles (DDGS), a co-product from the corn ethanol industry as a sustainable filler in bioplastic matrices made from a carbon dioxide-derived poly(propylene carbonate) (PPC) and poly(3-hyroxybutyrate-co-3-hydroxyvalerate) (PHBV) blend. The effect of water-washed DDGS (15 and 25 wt %) on the properties of injection-molded green composites from PHBV/PPC blends (60/40) and (40/60) and DDGS without and with peroxide (0.5 phr) has been investigated. From the results, it was noticed that the glass transition temperature (T g) of the PHBV/PPC (60/40) bioplastic matrix increased by ∼9.6 °C by adding a peroxide cross-linking agent, indicating significant interaction (linkage) between PHBV and PPC polymers in this particular composition ratio, which was supported by SEM analysis as no phase separation was observed between PHBV and PPC. The tensile modulus of PHBV/PPC (60/40) and PHBV/PPC (40/60) blends with peroxide was improved by ∼40.7 and 1.5% after the addition of 25 wt % DDGS, respectively, due to its fibrous flaky structure. The % elongation values at break of the PHBV/PPC (60/40) blend matrices with and without peroxide were drastically improved by 18.5 and 90.7 folds, respectively, as compared to that of brittle pristine PHBV.
Collapse
|
20
|
Ocean plastics: environmental implications and potential routes for mitigation - a perspective. RSC Adv 2021; 11:21447-21462. [PMID: 35478831 PMCID: PMC9034135 DOI: 10.1039/d1ra00353d] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2021] [Accepted: 05/16/2021] [Indexed: 12/18/2022] Open
Abstract
This review provides a current summary of the major sources and distribution of ocean plastic contamination, their potential environmental effects, and prospects towards the mitigation of plastic pollution. A characterization between micro and macro plastics has been established, along with a comprehensive discussion of the most common plastic waste sources that end up in aquatic environments within these categories. Distribution of these sources stems mainly from improper waste management, road runoff, and wastewater pathways, along with potential routes of prevention. The environmental impact of ocean plastics is not yet fully understood, and as such, current research on the potential adverse health effects and impact on marine habitats has been discussed. With increasing environmental damage and economic losses estimated at $US 1.5 trillion, the challenge of ocean plastics needs to be at the forefront of political and societal discussions. Efforts to increase the feasibility of collected ocean plastics through value-added commercial products and development of an international supply chain has been explored. An integrative, global approach towards addressing the growing ocean plastic problem has been presented.
Collapse
|
21
|
Challenges and new opportunities on barrier performance of biodegradable polymers for sustainable packaging. Prog Polym Sci 2021. [DOI: 10.1016/j.progpolymsci.2021.101395] [Citation(s) in RCA: 58] [Impact Index Per Article: 19.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
22
|
Spatial and seasonal variations in coastal water characteristics at Kalpakkam, western Bay of Bengal, Southeast India: a multivariate statistical approach. ENVIRONMENTAL MONITORING AND ASSESSMENT 2021; 193:366. [PMID: 34046759 DOI: 10.1007/s10661-021-09115-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/04/2020] [Accepted: 05/02/2021] [Indexed: 06/12/2023]
Abstract
A study was carried out in the coastal waters of Kalpakkam with the objectives to evaluate the seasonality in hydrobiological parameters in surface and bottom waters, and assess the anthropogenic stress and monsoonal flux on a spatiotemporal scale. The study covered an area of approximately 100 km2 in the coastal environment. Relatively high values for pH, temperature, and TP were observed during the post-monsoon (POM) season. The monsoon (MON) season was linked with TN, ammonia, and DO concentrations as all these parameters have shown increased values during this season due to freshwater input. The summer (SUM) season was characterized by salinity, turbidity, nitrate, phosphate, and silicate, indicating a true marine environmental condition for plankton production. Principal component analysis (PCA) and cluster analysis (CA) indicated the presence of distinct coastal water masses with respect to seasons and sampling regions. The spatial pattern indicated the distinctness of the coastal nearshore water (CNW) and coastal offshore water (COW) with respect to water quality. The CNW was more dynamic due to direct external influence as compared to the relatively stable COW environment. Similarly, the study region in the northern part, which is continuously exposed to the backwater inputs and tourism activities, was statistically different from the southern part.
Collapse
|
23
|
|
24
|
Novel sustainable materials from waste plastics: compatibilized blend from discarded bale wrap and plastic bottles. RSC Adv 2021; 11:8594-8605. [PMID: 35423365 PMCID: PMC8695198 DOI: 10.1039/d1ra00254f] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2021] [Accepted: 01/21/2021] [Indexed: 11/21/2022] Open
Abstract
This work studies a novel sustainable polymeric material made from a reactive blend of two agri-food waste plastics, with the new material showing strong promise for value-added industrial uses. Discarded bale wrap destined for landfill that was originally made from linear low density polyethylene (LLDPE) and used polyethylene terephthalate (PET)-based plastic bottles were melt mixed in a twin-screw extruder. The miscibility of such recycled LLDPE (rLLDPE) in recycled PET (rPET) is enhanced by the incorporation of a compatibilizer and the PET molecular architecture is maintained using a chain extender, which governs its melt strength. Microscopic analysis of the blends with the compatibilizer and chain extender confirms the enhanced interaction of rPET and rLLDPE chains and the formation of co-continuous morphologies. The efficient interaction of a soft phase (rLLDPE) with a hard phase (rPET) leads to prolonged fracture propagation by an appropriate impact energy transfer mechanism, which ultimately enhances the impact resistance and elongation at break of the resulting blend. The incorporation of a compatibilizer and chain extender in the rPET/rLLDPE blend makes it a toughened blend (with 60 J m−1 notched Izod impact strength) with ∼80% elongation at break in comparison to ∼3% for the blend without a compatibilizer or chain extender. Around ∼36% enhancement is observed in the tensile strength without affecting the tensile and flexural modulus in comparison to the blend without a compatibilizer or chain extender. Applications of the developed materials can extend from rigid packaging applications to the production of filaments for 3D printing. This work studies a novel sustainable polymeric material made from a reactive blend of two agri-food waste plastics, with the new material showing strong promise for value-added industrial uses.![]()
Collapse
|
25
|
Sustainable Biocomposites from Recycled Bale Wrap Plastic and Agave Fiber: Processing and Property Evaluation. ACS OMEGA 2021; 6:2856-2864. [PMID: 33553903 PMCID: PMC7860101 DOI: 10.1021/acsomega.0c05186] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/24/2020] [Accepted: 12/21/2020] [Indexed: 06/12/2023]
Abstract
Plastic recycling to make sustainable materials is considered one of the biggest initiatives toward a greener environment and socioeconomic development. This research aims to investigate the properties of a blend of recycled bale wrap linear low-density polyethylene (rLLDPE) and polypropylene (PP) (rLLDPE/PP 50:50 wt % matrix), which was further reinforced with 25 wt % agave fiber prepared by injection-molding. Different ratios of a combined industrial compatibilizer (maleic anhydride-grafted PP/PE) were used (1-3 wt %), which were compared with a synthesized compatibilizer made from maleic anhydride-PP/rLLDPE in terms of mechanical and thermomechanical properties of the biocomposites. Incorporation of the compatibilizer in the composite improved the interfacial adhesion between the hydrophobic matrix and the hydrophilic agave fiber, which further increased the mechanical properties and heat deflection temperature of the composite. Scanning electron microscopy showed enhanced compatibility and adhesion between the fiber and the matrix by inclusion of 2 wt % compatibilizer. The synthesized compatibilizer-blended composite showed better mechanical properties than the industrial one, which indicates the potential application of this composite (around 62% recycled material) in the manufacture of packaging materials and commodity products.
Collapse
|
26
|
Intense bloom of the diatom Hemidiscus hardmanianus (Greville) in relation to water quality and plankton communities in Tuticorin coast, Gulf of Mannar, India. MARINE POLLUTION BULLETIN 2021; 163:111757. [PMID: 33272587 DOI: 10.1016/j.marpolbul.2020.111757] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/24/2020] [Revised: 09/30/2020] [Accepted: 10/09/2020] [Indexed: 06/12/2023]
Abstract
The present study reports a dense bloom of the marine-diatom Hemidiscus hardmanianus observed off the Tuticorin coast in the Gulf of Mannar (GoM), India. The surface water discoloration (pale green) was observed during a coastal survey conducted in the initial period of the northeast monsoon (October 2018). The bloom extended over an area of approximately 5 km2 around the Tuticorin harbor. Distribution and relative abundance of the phytoplankton and zooplankton species together with the water quality and Chlorophyll-a were studied in the area of bloom. H. hardmanianus density was maximum (10.57 × 104 cells L-1) in the bloom site, which was almost 97% of the total phytoplankton population. The present report is the first record of H. hardmanianus bloom in the Gulf of Mannar. The chain-forming diatom Biddulphia biddulphiana was also observed in strong numbers (802 and 432 cells L-1), which has been rarely reported from the Indian coastal waters.
Collapse
|
27
|
Super-tough sustainable biobased composites from polylactide bioplastic and lignin for bio-elastomer application. POLYMER 2021. [DOI: 10.1016/j.polymer.2020.123153] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
28
|
Correction: Comparative study of the extrinsic properties of poly(lactic acid)-based biocomposites filled with talc versus sustainable biocarbon. RSC Adv 2021; 11:33661. [PMID: 35503280 PMCID: PMC9042299 DOI: 10.1039/d1ra90158c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2021] [Accepted: 10/01/2021] [Indexed: 11/21/2022] Open
Abstract
Correction for ‘Comparative study of the extrinsic properties of poly(lactic acid)-based biocomposites filled with talc versus sustainable biocarbon’ by Michael R. Snowdon et al., RSC Adv., 2019, 9, 6752–6761, DOI: 10.1039/C9RA00034H.
Collapse
|
29
|
Morphology and performance relationship studies on biodegradable ternary blends of poly(3-hydroxybutyrate- co-3-hydroxyvalerate), polylactic acid, and polypropylene carbonate. RSC Adv 2020; 10:44624-44632. [PMID: 35516230 PMCID: PMC9058669 DOI: 10.1039/d0ra07485c] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2020] [Accepted: 10/26/2020] [Indexed: 11/21/2022] Open
Abstract
A biodegradable ternary blend fabricated from polylactic acid (PLA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polypropylene carbonate (PPC) with a good balance of stiffness and toughness via optimizing the composition ratio and morphological structure is, to the best of the authors' knowledge, reported here for the first time. The optimal blend formulation is comprised of 20% PLA, 40% PHBV, and 40% PPC, which possesses a tensile strength measuring 44 MPa and an elongation at break measuring at 215%. Thermal performance analysis revealed an HDT value of 72 °C. The Harkins equation predicts that the three immiscible polymers formed a complete wetting morphology, which was confirmed by scanning electrical microscopy. As the PPC content of the ternary blends is increased, the material undergoes morphological transition from droplet to co-continuous structure, resulting in significant improvement of elongation at break (approximately 40 times higher than that of the PLA-PHBV binary blend). Excellent stiffness and over 200% elongation at break make these sustainable ternary blends feasible for use in packaging as substitutes for certain non-biodegradable petroleum-based single use plastics.
Collapse
|
30
|
Distribution and ecological- and health-risk assessment of heavy metals in the seawater of the southeast coast of India. MARINE POLLUTION BULLETIN 2020; 161:111712. [PMID: 33065393 DOI: 10.1016/j.marpolbul.2020.111712] [Citation(s) in RCA: 25] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2020] [Revised: 09/11/2020] [Accepted: 09/21/2020] [Indexed: 06/11/2023]
Abstract
The objective of the present study was to conduct an ecological and health risk assessment of heavy metals in the seawater of the southeast coast of India. The distribution profile of heavy metals in the surface seawater was Fe (79.60 ± 21.57 μg/L) > Zn (9.31 ± 1.33 μg/L) > Cu (5.19 ± 2.00 μg/L) > Ni (2.45 ± 0.76 μg/L) > Mn (1.20 ± 1.00 μg/L) > U (0.44 ± 0.23 μg/L) > Pb (0.36 ± 0.06 μg/L) > Cr (0.31 ± 0.57 μg/L) > Cd (0.11 ± 0.05 μg/L) > Co (0.07 ± 0.20 μg/L). Cu level for most of the samples exceeded the USEPA criteria for acute CMC (criterion maximum concentration) and chronic CCC (criterion continuous concentration). Other studied metals, Cd, Cr, Pb, and Ni, remained below the acute CMC and chronic CCC guidelines. The seawater pollution index (Iwp) of Cr, Ni, Zn, Cd, and Pb complied with the category-I seawater (<1, unpolluted). The ERI values (0.46-3.99) of the seawater of the studied coast mostly fell under the ecologically low risk category with respect to heavy metals. Dermal Hazard index values were orders of magnitude lower than one, indicating no potential health concern due to dermal exposure.
Collapse
|
31
|
Impact of renewable carbon on the properties of composites made by using three types of polymers having different polarity. J Appl Polym Sci 2020. [DOI: 10.1002/app.49948] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
32
|
Recent advances in additive manufacturing of engineering thermoplastics: challenges and opportunities. RSC Adv 2020; 10:36058-36089. [PMID: 35517121 PMCID: PMC9057068 DOI: 10.1039/d0ra04857g] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2020] [Accepted: 08/17/2020] [Indexed: 12/12/2022] Open
Abstract
There are many limitations within three-dimensional (3D) printing that hinder its adaptation into industries such as biomedical, cosmetic, processing, automotive, aerospace, and electronics. The disadvantages of 3D printing include the inability of parts to function in weight-bearing applications, reduced mechanical performance from anisotropic properties of printed products, and limited intrinsic material performances such as flame retardancy, thermal stability, and/or electrical conductivity. Many of these shortcomings have prevented the adaptation of 3D printing into product development, especially with few novel researched materials being sold commercially. In many cases, high-performance engineering thermoplastics (ET) provide a basis for increased thermal and mechanical performances to address the shortcomings or limitations of both selective laser sintering and extrusion 3D printing. The first strategy to combat these limitations is to fabricate blends or composites. Novel printing materials have been implemented to reduce anisotropic properties and losses in strength. Additives such as flame retardants generate robust materials with V0 flame retardancy ratings, and compatibilizers can improve thermal or dimensional stability. To serve the electronic industry better, the addition of carbon black at only 4 wt%, to an ET matrix has been found to improve the electrical conductivity by five times the magnitude. Surface modifications such as photopolymerization have improved the usability of ET in automotive applications, whereas the dynamic chemical processes increased the biocompatibility of ET for medical device materials. Thermal resistant foam from polyamide 12 and fly ash spheres were researched and fabricated as possible insulation materials for automotive industries. These works and others have not only generated great potential for additive manufacturing technologies, but also provided solutions to critical challenges of 3D printing.
Collapse
|
33
|
Erratum: Evolution of π^{0} Suppression in Au+Au Collisions from sqrt[s_{NN}]=39 to 200 GeV [Phys. Rev. Lett. 109, 152301 (2012)]. PHYSICAL REVIEW LETTERS 2020; 125:049901. [PMID: 32794791 DOI: 10.1103/physrevlett.125.049901] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2020] [Indexed: 06/11/2023]
Abstract
This corrects the article DOI: 10.1103/PhysRevLett.109.152301.
Collapse
|
34
|
Study on the 3D printability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(lactic acid) blends with chain extender using fused filament fabrication. Sci Rep 2020; 10:11804. [PMID: 32678118 PMCID: PMC7367353 DOI: 10.1038/s41598-020-68331-5] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2019] [Accepted: 04/15/2020] [Indexed: 12/20/2022] Open
Abstract
In this study, the 3D printability of a series of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/poly(lactic acid) (PLA) blends were investigated using fused filament fabrication (FFF). The studied blends suffered from poor 3D printability due to differences in compatibility and low thermal resistance. These shortcomings were addressed by incorporating a functionalized styrene-acrylate copolymer with oxirane moieties as a chain extender (CE). To enhance mechanical properties, the synergistic effect of 3D printing parameters such as printing temperature and speed, layer thickness and bed temperature were explored. Rheological analysis showed improvement in the 3D printability of PHBV:PLA:CE blend by allowing a higher printing temperature (220 °C) and sufficient printing speed (45 mm s−1). The surface morphology of fractured tensile specimens showed good bonding between layers when a bed temperature of 60 °C was used and a layer thickness of 0.25 mm was designed. The optimized printing samples shown higher storage modulus and strength, resulting in stiffer and stronger parts. The crystallinity, morphology and performance of the 3D printed products were correlated to share key methods to improve the 3D printability of PHBV:PLA based blends which may be implemented in other biopolymer blends, and further highlight how process parameters enhance the mechanical performance of 3D printed products.
Collapse
|
35
|
Hybrid biocomposites from polypropylene, sustainable biocarbon and graphene nanoplatelets. Sci Rep 2020; 10:10714. [PMID: 32612178 PMCID: PMC7329909 DOI: 10.1038/s41598-020-66855-4] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2020] [Accepted: 05/28/2020] [Indexed: 11/24/2022] Open
Abstract
Polypropylene (PP) is an attractive polymer for use in automotive parts due to its ease of processing, hydrophobic nature, chemical resistance and low density. The global shift towards eliminating non-renewable resource consumption has promoted research of sustainable biocarbon (BioC) filler in a PP matrix, but this material often leads to reduction in composite strength and requires additional fillers. Graphene nano-platelets (GnPs) have been the subject of considerable research as a nanofiller due to their strength, while maleic anhydride grafted polypropylene (MA-g-PP) is a commonly used compatibilizer for improvement of interfacial adhesion in composites. This study compared the thermo-mechanical properties of PP/BioC/MA-g-PP/GnP composites with varying wt.% of GnP. Morphological analysis revealed uniform dispersion of BioC, while significant agglomeration of GnPs limited their even dispersion throughout the PP matrix. In the optimal blend of 3 wt.% GnP and 17 wt.% BioC biocontent, tensile strength and modulus increased by ~19% and ~22% respectively, as compared to 20 wt.% BioC biocomposites. Thermal stability and performance enhancement occurred through incorporation of the fillers. Thus, hybridization of fillers in the compatibilized matrix presents a promising route to the enhancement of material properties, while reducing petroleum-based products through use of sustainable BioC filler in composite structures.
Collapse
|
36
|
Toughening of Biodegradable Poly(3-hydroxybutyrate- co-3-hydroxyvalerate)/Poly(ε-caprolactone) Blends by In Situ Reactive Compatibilization. ACS OMEGA 2020; 5:14900-14910. [PMID: 32637764 PMCID: PMC7330898 DOI: 10.1021/acsomega.9b04379] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2019] [Accepted: 04/28/2020] [Indexed: 06/02/2023]
Abstract
Reactive extrusion of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(ε-caprolactone) (PHBV/PCL) blends was performed in the presence of cross-linker 1,3,5-tri-2-propenyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TAIC) and peroxide. The compatibility between the two biodegradable polymers was significantly improved only when TAIC and peroxide work together, as evidenced by the decreased PCL particle size and blurred interfacial gap between the PHBV and PCL. The mechanical, thermal, morphological, and rheological properties of the compatibilized blends were studied and compared to the blends without TAIC and peroxide. At the optimal TAIC content (1 phr), the elongation at break of the compatibilized blends was 380% that of the PHBV/PCL blend without any additives and 700% that of neat PHBV. The improved interfacial compatibility, decreased PCL particle size, and uniform PHBV crystals are all factors that contribute to improving the toughness of the blend. Through Fourier transform infrared (FTIR) and rheological studies, the reaction mechanism is discussed. The study shows that PHBV and PCL are cross-linked by TAIC, resulting in the formation of a PHBV-PCL co-polymer, which improves the compatibility of the blend. The biodegradable polymer blends with high crystallinity and improved toughness prepared in this study are proposed to be used in sustainable packaging or other applications.
Collapse
|
37
|
Sustainable PHBV/Cellulose Acetate Blends: Effect of a Chain Extender and a Plasticizer. ACS OMEGA 2020; 5:14221-14231. [PMID: 32596558 PMCID: PMC7315424 DOI: 10.1021/acsomega.9b03369] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/10/2019] [Accepted: 02/26/2020] [Indexed: 06/11/2023]
Abstract
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and cellulose acetate (CA) were blended in the presence of a plasticizer, i.e., triethyl citrate (TEC), and a chain extender, i.e., poly(styrene-acrylic-co-glycidyl methacrylate). To increase the ductility and impact properties of PHBV and to investigate a new biodegradable PHBV-based blend for sustainable packaging, CA was compatibilized with TEC. PHBV and plasticized CA (pCA) blends showed complete immiscibility through separate glass transition and melting peak temperatures in differential scanning calorimetry (DSC), despite the similar Hansen solubility parameters of PHBV, CA, and TEC, indicating partial miscibility. Phase separation between PHBV and pCA was clearly observed by scanning electron microscopy (SEM). PHBV/pCA (70:30) blends had improved impact strength, exceeding that of neat PHBV and pCA, which is attributed to PHBV porosity induced by degradation from the high processing temperature. During processing, the plasticizer migrated from CA to PHBV and partially plasticized it, as evidenced through DSC analysis. The melt temperature of PHBV was reduced, which was confirmed by double melting peaks, representing the formation of secondary crystallites at a lower temperature. Due to processing at high temperatures (210-220 °C), significant porosity was observed in the PHBV/pCA 30:70 blend in SEM analysis. Consequently, the impact strength was improved by 110% as compared to that of virgin PHBV. The addition of CE had no effect on the mechanical properties but did make the PHBV/pCA blends morphologically uniform.
Collapse
|
38
|
Thermal and Mechanical Properties of the Biocomposites of Miscanthus Biocarbon and Poly(3- Hydroxybutyrate- co-3- Hydroxyvalerate) (PHBV). Polymers (Basel) 2020; 12:E1300. [PMID: 32517200 PMCID: PMC7362254 DOI: 10.3390/polym12061300] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/08/2020] [Revised: 05/29/2020] [Accepted: 05/31/2020] [Indexed: 11/29/2022] Open
Abstract
Miscanthus biocarbon (MB), a renewable resource-based, carbon-rich material, was melt-processed with poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) to produce sustainable biocomposites. The addition of the biocarbon improved the Young's modulus of PHBV from 3.6 to 5.2 GPa at 30 wt % filler loading. An increase in flexural modulus, up to 48%, was also observed. On the other hand, the strength, elongation-at-break and impact strength decreased. Morphological study of the impact-fractured surfaces showed weak interaction at the interface and the existence of voids and agglomerates, especially with high filler contents. The thermal stability of the PHBV/MB composites was slightly reduced compared with the neat PHBV. The biocarbon particles were not found to have a nucleating effect on the polymer. The degradation of PHBV and the formation of unstable imperfect crystals were revealed by differential scanning calorimetry (DSC) analysis. Higher filler contents resulted in reduced crystallinity, indicating more pronounced effect on polymer chain mobility restriction. With the addition of 30 wt % biocarbon, the heat deflection temperature (HDT) became 13 degrees higher and the coefficient of linear thermal expansion (CLTE) decreased from 100.6 to 75.6 μm/(m·°C), desired improvement for practical applications.
Collapse
|
39
|
Statistical design of sustainable composites from poly(lactic acid) and grape pomace. J Appl Polym Sci 2020. [DOI: 10.1002/app.49061] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|
40
|
Tailoring the toughness of sustainable polymer blends from biodegradable plastics via morphology transition observed by atomic force microscopy. Polym Degrad Stab 2020. [DOI: 10.1016/j.polymdegradstab.2019.109066] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
41
|
Insights on the structure-performance relationship of polyphthalamide (PPA) composites reinforced with high-temperature produced biocarbon. RSC Adv 2020; 10:26917-26927. [PMID: 35515792 PMCID: PMC9055528 DOI: 10.1039/d0ra03629c] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2020] [Accepted: 06/22/2020] [Indexed: 12/18/2022] Open
Abstract
Biocarbon-filled polyphthalamide composites were made, achieving comparable mechanical and thermal characteristics to talc-filled ones, at a lower density.
Collapse
|
42
|
Studies on durability of sustainable biobased composites: a review. RSC Adv 2020; 10:17955-17999. [PMID: 35517220 PMCID: PMC9054028 DOI: 10.1039/c9ra09554c] [Citation(s) in RCA: 58] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2019] [Accepted: 03/20/2020] [Indexed: 12/18/2022] Open
Abstract
This review provides a comprehensive discussion on the long-term durability performance and degradation behaviour of the increasingly popular sustainable biobased composites under various aging environments.
Collapse
|
43
|
Comparative proteomic analysis of Salmonella Typhimurium wild type and its isogenic fnr null mutant during anaerobiosis reveals new insight into bacterial metabolism and virulence. Microb Pathog 2019; 140:103936. [PMID: 31862389 DOI: 10.1016/j.micpath.2019.103936] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2019] [Revised: 12/13/2019] [Accepted: 12/16/2019] [Indexed: 11/19/2022]
Abstract
AIM The aim of this study was to understand the role of anaerobic regulator FNR (Fumarate Nitrate Reduction) in Salmonella Typhimurium through proteomic approach. METHODS AND RESULTS We did label free quantitative proteomic analysis of Salmonella Typhimurium PM45 wild type and the fnr null mutant cultured under anaerobic conditions. The data revealed 153 significantly differentially expressed proteins (DEPs) in the mutant out of 1798 total proteins identified. Out of 153 DEPs, 94 proteins were up-regulated (repressed by FNR) and 59 proteins were down-regulated (activated by FNR) in the mutant. The network analysis indicated up-regulation of TCA cycle, electron transport chain and ethanolamine metabolism and down regulation of pyruvate metabolism and glycerol and glycerophospholipid metabolism. CONCLUSIONS Our study showed that FNR represses ethanolamine utilization. The different metabolic pathways such as pyruvate metabolism, glycerol metabolism and glycerophospholipid metabolism were activated by FNR. Further, FNR positively regulated the DNA binding protein Fis, one of the global regulators of virulence in Salmonella Typhimurium. Thus, our finding highlights the pivotal role of FNR in regulating bacterial metabolism and virulence during anaerobiosis for systemic infection of the host.
Collapse
|
44
|
Hybrid Green Bionanocomposites of Bio-based Poly(butylene succinate) Reinforced with Pyrolyzed Perennial Grass Microparticles and Graphene Nanoplatelets. ACS OMEGA 2019; 4:20476-20485. [PMID: 31858031 PMCID: PMC6906787 DOI: 10.1021/acsomega.9b01771] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/14/2019] [Accepted: 10/25/2019] [Indexed: 06/10/2023]
Abstract
Bio-based poly(butylene succinate) (BioPBS) was combined with pyrolyzed Miscanthus microparticles (biocarbon) and graphene nanoplatelets to create a hybrid bionanocomposite. Pyrolyzed biomass, known as biocarbon, was incorporated into a BioPBS matrix to improve the thermo-mechanical properties of the bioplastic while simultaneously increasing the value of this co-product. Biocomposites loaded with 25 wt % biocarbon showed 57, 13, and 32% improvements in tensile modulus, heat deflection temperature, and thermal expansion, respectively. Further improvements were found when graphene nanoplatelets (GnPs) were added to the biocomposite, forming a hierarchical hybrid bionanocomposite. Two processing methods were used to incorporate graphene into the composites: (I) graphene, BioPBS, and biocarbon were added together and directly compounded, and (II) a masterbatch of graphene and BioPBS was processed first and then diluted to the same ratios as those used in the direct compounding method I. The two methods resulted in different internal morphologies that subsequently impacted the mechanical properties of the composites; little change was observed in the thermal properties studied. Bionanocomposites processed using the direct compounding technique showed the greatest increase in tensile strength and modulus: 17 and 120%, respectively. Bionanocomposites processed using a masterbatch technique had slightly lower strength and modulus but showed almost twice the impact strength compared with the direct compounding method. This masterbatch technique was found to have a superior balance of stiffness and toughness, likely due to the presence of superclustered graphene platelets, confirmed through a scanning electron microscope and a transmission electron microscope.
Collapse
|
45
|
Strategy To Improve Printability of Renewable Resource-Based Engineering Plastic Tailored for FDM Applications. ACS OMEGA 2019; 4:20297-20307. [PMID: 31815232 PMCID: PMC6893943 DOI: 10.1021/acsomega.9b02795] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/29/2019] [Accepted: 10/24/2019] [Indexed: 06/10/2023]
Abstract
This work features the first-time use of poly(trimethylene terephthalate) (PTT), a biobased engineering thermoplastic, for fused deposition modeling (FDM) applications. Additives such as chain extenders (CEs) and impact modifiers are traditionally used to improve the processability of polymers for injection molding; as a proof of concept for their use in FDM, the same strategies were applied to PTT to improve its printability. The filament processing conditions and printing parameters were optimized to generate complete, warpage-free samples. The blends were characterized through physical, thermal, viscoelastic, and morphological analyses. In the optimal blend (90 wt % PTT, 10 wt % impact modifier, and 0.5 phr CE), the filament diameter was improved by ∼150%, the size of the spherulites significantly decreased to 5% of the ∼26 μm spherulite size found in neat PTT, and the melt flow index decreased to ∼4.7 g/10 min. From this blend, FDM samples with a high impact performance of ∼61 J/m were obtained, which are comparable to other conventional FDM thermoplastics. The ability to print complete and warpage-free samples from this blend suggests a new filament feedstock material for industrial and home-use FDM applications. This paper discusses methods to improve hard-to-print polymers and presents the improved printability of PTT as proof of these methods' effectiveness.
Collapse
|
46
|
Studies on why the heat deflection temperature of polylactide bioplastic cannot be improved by overcrosslinking. POLYMER CRYSTALLIZATION 2019. [DOI: 10.1002/pcr2.10088] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
47
|
Comparison in composite performance after thermooxidative aging of injection molded polyamide 6 with glass fiber, talc, and a sustainable biocarbon filler. J Appl Polym Sci 2019. [DOI: 10.1002/app.48618] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
|
48
|
Injection Molded Novel Biocomposites from Polypropylene and Sustainable Biocarbon. Molecules 2019; 24:molecules24224026. [PMID: 31703289 PMCID: PMC6891267 DOI: 10.3390/molecules24224026] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2019] [Revised: 10/25/2019] [Accepted: 11/01/2019] [Indexed: 11/16/2022] Open
Abstract
Achieving sustainability in composite materials for high-performance applications is a key issue in modern processing technologies. In this work, the structure-property relationships of injection molded polypropylene (PP)/biocarbon composites were investigated with a focus on the thermal properties and specific emphasis on the coefficient of linear thermal expansion (CLTE). Biocomposites were produced using 30 wt.% biocarbon in a PP matrix, and two different sources of biocarbon produced at ~650 and 900 °C were used. The overall results were compared with 30 wt.% glass- and talc-filled PP composites. Due to the lamellar morphology of the talc developed during the extrusion-injection molding processing, talc-filled composites showed an increase in the CLTE in the normal direction (ND), and a reduction in the flow direction (FD) with respect to the neat polymer. Glass fiber composites also showed an improvement in the CLTE with respect to the neat polymer. However, the biocarbon-based composites showed the best properties in the ND, with improved values in biocarbon produced at higher temperature. The FD values for both biocarbon composites were improved with respect to the matrix, while biocarbon created at lower temperature showed slightly lower expansion values. A comprehensive explanation of these overall phenomena is supported by a series of morphological, thermal, mechanical and rheological tests.
Collapse
|
49
|
Novel sustainable biobased flame retardant from functionalized vegetable oil for enhanced flame retardancy of engineering plastic. Sci Rep 2019; 9:15971. [PMID: 31685842 PMCID: PMC6828712 DOI: 10.1038/s41598-019-52039-2] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2019] [Accepted: 10/02/2019] [Indexed: 11/09/2022] Open
Abstract
The flame retardancy of an engineering plastic, poly(butylene terephthalate) (PBT), with a biobased flame retardant (FR) made from phosphorylated linseed oil (PLO) and phosphorylated downstream corn oil (PCO) was studied. Different phosphorus moieties were incorporated into the vegetable oil backbone through a ring-opening reaction. The chemical structure of the phosphorylated oil was confirmed by Fourier-transform infrared (FTIR) and nuclear resonance magnetic (NMR) spectroscopy. It was found that the incorporation of only 7.5 wt% of PLO was sufficient to change the UL-94 fire class of PBT from non-rating to V-0. The flame-retardancy mechanism of the PBT/PLO blends was evaluated from TGA-FTIR analysis. The combined effects of the gas phase mechanism and the dripping tendency of the blends aided to retard the flame propagation effectively. As the synthesized PLO and PCO contained high free fatty acids, the acid-ester exchange reaction occurred in the blends to form oligomers during the ignition. As a result, the blend dripped immediately and the drips carried all the heat to prevent fire. This work suggests that this sustainable biobased FR could be a desirable alternative to halogen-based FRs for PBT and other engineering polymers to develop more environmentally friendly FR products for various future applications.
Collapse
|
50
|
Beam Energy and Centrality Dependence of Direct-Photon Emission from Ultrarelativistic Heavy-Ion Collisions. PHYSICAL REVIEW LETTERS 2019; 123:022301. [PMID: 31386493 DOI: 10.1103/physrevlett.123.022301] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/15/2018] [Revised: 04/27/2019] [Indexed: 06/10/2023]
Abstract
The PHENIX collaboration presents first measurements of low-momentum (0.4<p_{T}<3 GeV/c) direct-photon yields from Au+Au collisions at sqrt[s_{NN}]=39 and 62.4 GeV. For both beam energies the direct-photon yields are substantially enhanced with respect to expectations from prompt processes, similar to the yields observed in Au+Au collisions at sqrt[s_{NN}]=200. Analyzing the photon yield as a function of the experimental observable dN_{ch}/dη reveals that the low-momentum (>1 GeV/c) direct-photon yield dN_{γ}^{dir}/dη is a smooth function of dN_{ch}/dη and can be well described as proportional to (dN_{ch}/dη)^{α} with α≈1.25. This scaling behavior holds for a wide range of beam energies at the Relativistic Heavy Ion Collider and the Large Hadron Collider, for centrality selected samples, as well as for different A+A collision systems. At a given beam energy, the scaling also holds for high p_{T} (>5 GeV/c), but when results from different collision energies are compared, an additional sqrt[s_{NN}]-dependent multiplicative factor is needed to describe the integrated-direct-photon yield.
Collapse
|