Dead in the water - Role of relic DNA and primer choice for targeted sequencing surveys of anaerobic sewage sludge intended for biological monitoring

DNA-based monitoring of microbial communities that are responsible for the performance of anaerobic digestion of sewage wastes has the potential to improve resource recoveries for wastewater treatment facilities. By treating sludge with propidium monoazide (PMA) prior to amplicon sequencing, this study explored how the presence of DNA from dead microbial biomass carried over with feed sludge may mislead process-relevant biomarkers, and whether primer choice impacts such assessments. Four common primers were selected for amplicon preparation, also to determine if universal primers have sufficient taxonomic or functional coverage for monitoring ecological performance; or whether two domain-specific primers for Bacteria and Archaea are necessary. Anaerobic sludges of three municipal continuously stirred-tank reactors in Victoria, Australia, were sampled at one time-point. A total of 240 amplicon libraries were sequenced on a Miseq using two universal and two domain-specific primer pairs. Untargeted metabolomics was chosen to complement biological interpretation of amplicon gene-based functional predictions. Diversity, taxonomy, phylogeny and functional potentials were systematically assessed using PICRUSt2, which can predict community wide pathway abundance. The two chosen universal primers provided similar diversity profiles of abundant Bacteria and Archaea, compared to the domain-specific primers. About 16 % of all detected prokaryotic genera covering 30 % of total abundances and 6 % of PICRUSt2-estimated pathway abundances were affected by PMA. This showed that dead biomass in the anaerobic digesters impacted DNA-based assessments, with implications for predicting active processes, such as methanogenesis, denitrification or the identification of organisms associated with biological foams. Hence, instead of running two sequencing runs with two different domain-specific primers, we propose conducting PMA-seq with universal primer pairs for routine performance monitoring. However, dead sludge biomass may have some predictive value. In principal component analysis the compositional variation of 239 sludge metabolites resembled that of 'dead-plus-alive' biomass, suggesting that dead organisms contributed to the potentially process-relevant sludge metabolome.

Effect of the Application of Ochrobactrum sp.-Immobilised Biochar on the Remediation of Diesel-Contaminated Soil

The immobilisation of bacteria on biochar has shown potential for enhanced remediation of petroleum hydrocarbon-contaminated soil. However, there is a lack of knowledge regarding the effect of bacterial immobilisation on biosolids-derived biochar for the remediation of diesel-contaminated soil. This current study aimed to assess the impact of the immobilisation of an autochthonous hydrocarbonoclastic bacteria, Ochrobacterium sp. (BIB) on biosolids-derived biochar for the remediation of diesel-contaminated soil. Additionally, the effect of fertiliser application on the efficacy of the BIB treatment was investigated. Biochar (BC) application alone led to significantly higher hydrocarbon removal than the control treatment at all sampling times (4887-11,589 mg/kg higher). When Ochrobacterium sp. was immobilised on biochar (BIB), the hydrocarbon removal was greater than BC by 5533 mg/kg and 1607 mg/kg at weeks 10 and 22, respectively. However, when BIB was co-applied with fertiliser (BIBF), hydrocarbon removal was lower than BIB alone by 6987-11,767 mg/kg. Quantitative PCR (q-PCR) analysis revealed that the gene related to Ochrobacterium sp. was higher in BIB than in the BC treatment, which likely contributed to higher hydrocarbon removal in the BIB treatment. The results of the q-PCR analysis for the presence of alkB genes and FTIR analysis suggest that the degradation of alkane contributed to hydrocarbon removal. The findings of this study demonstrate that bacterial immobilisation on biosolids-derived biochar is a promising technique for the remediation of diesel-contaminated soil. Future studies should focus on optimising the immobilisation process for enhanced hydrocarbon removal.

Assessing the impact of immobilisation on the bioavailability of PFAS to plants in contaminated Australian soils

Per- and polyfluoroalkyl substances (PFAS) have become a key concern to both environmental and human health due to their extreme persistence in the environment and their ability to bioaccumulate in plants, animals, and humans. In this mesocosm study, Australian PFAS-contaminated soil with a mean total concentration of 8.05 mg/kg and a mean combined PFHxS + PFOS concentration of 7.89 mg/kg was treated with an immobilisation sorbent (RemBind®) at different application rates (0.5, 1, 1.5, 2, 3, 4, and 5% w/w). To assess the efficacy of this immobilisation treatment, PFAS leachability, PFAS plant uptake, and ecotoxicity tests were conducted. Leachability testing was performed according to the Australian Standard Leaching Procedure (ASLP) at pH 5 and 7. A grass species (Dactylis glomerata) was used to measure plant uptake of PFAS from untreated and treated contaminated soil. In addition, the Microtox test was used to assess the associated ecotoxicity. The immobilisation treatment resulted in a significant reduction of 88.5-99.8% in the total PFAS leachability and 88.7-99.8% in the combined PFOS and PFHxS leachability at pH 5. Similarly, significant reductions (5-12-fold) were observed in the plant uptake of total PFAS and combined PFOS and PFHxS in all treated soil samples. In addition, although the Microtox test showed relatively low ecotoxicity in all the experimental samples, including the untreated soil, a significant decrease in the ecotoxicity of treated soil samples was observed. The results from this study highlight that this treatment approach has the potential to reduce both PFAS leachability and plant bioavailability with a relatively low associated ecotoxicity. This is likely to reduce the risk of the transfer of PFAS into higher trophic levels. This immobilisation treatment may, therefore, reduce the risk associated with PFAS-contaminated soils and may be an important remediation tool for managing certain PFAS-contaminated soils.

Wood biochar enhances methanogenesis in the anaerobic digestion of chicken manure under ammonia inhibition conditions

The process of breaking down chicken manure through anaerobic digestion is an effective waste management technology. However, chicken manure can be a challenging feedstock, causing ammonia stress and digester instability. This study examined the impacts of adding wood biochar and acid-alkali-treated wood biochar to anaerobically digest chicken manure under conditions of ammonia inhibition. The results highlighted that only the addition of 5 % acid-alkali-treated wood biochar by volume can achieve cumulative methane production close to the typical methane potential range of chicken manure. The treated wood biochar also exhibited highest total ammonia nitrogen removal compared to the Control treatment. Scanning Electron Microscope revealed growing interactions between biochar and methanogens over time. Real-time polymerase chain reaction showed that treated wood biochar produced the highest number of bacterial biomass. In addition, 16S amplicon-based sequencing identified a more robust archaeal community from treated biochar addition. Overall, the acid-alkali treatment of biochar represents an effective method of modifying biochar to improve its performance in anaerobic digestion.

Prospective Subunit Nanovaccine against Mycobacterium tuberculosis Infection─Cubosome Lipid Nanocarriers of Cord Factor, Trehalose 6,6' Dimycolate

An improved vaccine is urgently needed to replace the now more than 100-year-old Bacillus Calmette-Guérin (BCG) vaccine against tuberculosis (TB) disease, which represents a significant burden on global public health. Mycolic acid, or cord factor trehalose 6,6' dimycolate (TDM), a lipid component abundant in the cell wall of the pathogen Mycobacterium tuberculosis (MTB), has been shown to have strong immunostimulatory activity but remains underexplored due to its high toxicity and poor solubility. Herein, we employed a novel strategy to encapsulate TDM within a cubosome lipid nanocarrier as a potential subunit nanovaccine candidate against TB. This strategy not only increased the solubility and reduced the toxicity of TDM but also elicited a protective immune response to control MTB growth in macrophages. Both pre-treatment and concurrent treatment of the TDM encapsulated in lipid monoolein (MO) cubosomes (MO-TDM) (1 mol %) induced a strong proinflammatory cytokine response in MTB-infected macrophages, due to epigenetic changes at the promoters of tumor necrosis factor alpha (TNF-α) and interleukin 6 (IL-6) in comparison to the untreated control. Furthermore, treatment with MO-TDM (1 mol %) cubosomes significantly improved antigen processing and presentation capabilities of MTB-infected macrophages to CD4 T cells. The ability of MO-TDM (1 mol %) cubosomes to induce a robust innate and adaptive response in vitro was further supported by a mathematical modeling study predicting the vaccine efficacy in vivo. Overall, these results indicate a strong immunostimulatory effect of TDM when delivered through the lipid nanocarrier, suggesting its potential as a novel TB vaccine.

Cubosome Lipid Nanocarriers As a Drug Delivery Vehicle for Intracellular Mycobacterium tuberculosis Infections

Mycobacterium tuberculosis (MTB) causes the infectious disease tuberculosis (TB), responsible for more deaths than any other single infectious disease in history. Intracellular MTB are slow growing and difficult to target with traditional antitubercular drugs, leading to the emergence of multidrug resistance in TB infection, which is a major global public health issue. Recent advances in innovative lipid nanotechnologies for drug delivery have demonstrated promising outcomes for chronic infectious diseases but have not yet been tested as potential delivery systems for intracellular infections such as TB. The current study evaluates the potential of monoolein (MO)-based cationic cubosomes for the encapsulation and delivery of the first line antitubercular drug rifampicin (RIF) against an MTB-H37Ra in vitro culture model. In particular, we show that the use of cationic cubosomes as delivery vehicles reduced the minimum inhibitory concentration (MIC) of RIF by 2-fold against actively replicating MTB-H37Ra (compared to that of the free drug) and also shortened the lifecycle duration of axenic MTB-H37Ra from 5 to 3 days. The cubosome-mediated delivery was also found to be effective against intracellular MTB-H37Ra within THP-1 human macrophages, with a 2.8 log reduction in viability of the bacilli after 6 days incubation at the MIC. The killing time was also reduced from 8 to 6 days without distressing the host macrophages. Mechanistic studies on the uptake of RIF-loaded cationic cubosomes using total internal reflection fluorescence microscopy (TIRFM) demonstrated the capacity of these lipid particles to effectively target intracellular bacteria. Overall, these results demonstrate that cationic cubosomes are a potent delivery system for the antitubercular drug RIF for therapeutic management of TB.

Development of A Rapid, Low-Cost Portable Detection Assay for Enterococci in Wastewater and Environmental Waters

Waterborne diseases are known as a leading cause of illness and death in both developing and developed countries. Several pathogens can be present in contaminated water, particularly waters containing faecal material; however, routine monitoring of all pathogens is not currently possible. Enterococcus faecalis, which is present in the microflora of human and animals has been used as a faecal indicator in water due to its abundance in surface water and soil. Accurate and fast detection methods are critical for the effective monitoring of E. faecalis in the environment. Although conventional and current molecular detection techniques provide sufficient sensitivity, specificity and throughput, their use is hampered by the long waiting period (1-6 days) to obtain results, the need for expensive laboratory equipment, skilled personnel, and cold-chain storage. Therefore, this study aimed to develop a detection system for E. faecalis that would be simple, rapid, and low-cost, using an isothermal DNA amplification assay called recombinase polymerase amplification (RPA), integrated with a lateral flow assay (LFA). The assay was found to be 100% selective for E. faecalis and capable of detecting rates as low as 2.8 × 10³ cells per 100 mL from water and wastewater, and 2.8 × 10⁴ cells per 100 mL from saline water. The assay was completed in approximately 30 min using one constant temperature (38 °C). In addition, this study demonstrated the quantitation of E. faecalis using a lateral flow strip reader for the first time, enhancing the potential use of RPA assay for the enumeration of E. faecalis in wastewater and heavily contaminated environmental waters, surface water, and wastewater. However, the sensitivity of the RPA-LFA assay for the detection of E. faecalis in tap water, saline water and in wastewater was 10-1000 times lower than that of the Enterolert-E test, depending on the water quality. Nevertheless, with further improvements, this low-cost RPA-LFA may be suitable to be used at the point-of-need (PON) if conjugated with a rapid field-deployable DNA extraction method.

Investigations into valorisation of trade wastewater for biomethane production

Biogas production from wastewater is one way that industrial sites can work towards the UN Sustainable Development Goals, while recovering a valuable resource. The objective of this study was to investigate the suitability of data collected by municipal wastewater service providers as a method of classifying and screening waste producers as potential sites for biogas resource recovery by anaerobic digestion. Industrial wastewater samples, including raw effluent and treated waste ready for discharge, were examined, and biomethane potential assays performed. Results of chemical analysis and lab-scale digestion were compared to historical service provider data, and patterns were observed. Biomethane yields of up to 357 mL/gVS and 287mL/gVS were achieved from raw and treated effluent respectively. Digestion at the top four prospects could produce over 4690 GJ of methane and save $47,000 in natural gas costs, offsetting 490 tonnes of CO₂ equivalent annually. These streams, from logistics, waste management, food and animal product businesses, combined high levels of degradable substrates and low levels of inhibitory components. While it is unlikely that this type of screening program can be completely accurate, certain parameters, including high sodium concentration, are applicable for discounting the potential for biogas production. This knowledge can be a valuable tool in the process of selecting sites for future resource recovery, therefore increasing the uptake of these processes, resulting in economic, environmental, and climate change mitigation benefits.

The role of microbial ecology in improving the performance of anaerobic digestion of sewage sludge

The use of next-generation diagnostic tools to optimise the anaerobic digestion of municipal sewage sludge has the potential to increase renewable natural gas recovery, improve the reuse of biosolid fertilisers and help operators expand circular economies globally. This review aims to provide perspectives on the role of microbial ecology in improving digester performance in wastewater treatment plants, highlighting that a systems biology approach is fundamental for monitoring mesophilic anaerobic sewage sludge in continuously stirred reactor tanks. We further highlight the potential applications arising from investigations into sludge ecology. The principal limitation for improvements in methane recoveries or in process stability of anaerobic digestion, especially after pre-treatment or during co-digestion, are ecological knowledge gaps related to the front-end metabolism (hydrolysis and fermentation). Operational problems such as stable biological foaming are a key problem, for which ecological markers are a suitable approach. However, no biomarkers exist yet to assist in monitoring and management of clade-specific foaming potentials along with other risks, such as pollutants and pathogens. Fundamental ecological principles apply to anaerobic digestion, which presents opportunities to predict and manipulate reactor functions. The path ahead for mapping ecological markers on process endpoints and risk factors of anaerobic digestion will involve numerical ecology, an expanding field that employs metrics derived from alpha, beta, phylogenetic, taxonomic, and functional diversity, as well as from phenotypes or life strategies derived from genetic potentials. In contrast to addressing operational issues (as noted above), which are effectively addressed by whole population or individual biomarkers, broad improvement and optimisation of function will require enhancement of hydrolysis and acidogenic processes. This will require a discovery-based approach, which will involve integrative research involving the proteome and metabolome. This will utilise, but overcome current limitations of DNA-centric approaches, and likely have broad application outside the specific field of anaerobic digestion.

The co-application of biochar with bioremediation for the removal of petroleum hydrocarbons from contaminated soil

Soil pollution from petroleum hydrocarbon is a global environmental problem that could contribute to the non-actualisation of the United Nations Sustainable Development Goals. Several techniques have been used to remediate petroleum hydrocarbon-contaminated soils; however, there are technical and economical limitations to existing methods. As such, the development of new approaches and the improvement of existing techniques are imperative. Biochar, a low-cost carbonaceous product of the thermal decomposition of waste biomass has gained relevance in soil remediation. Biochar has been applied to remediate hydrocarbon-contaminated soils, with positive and negative results reported. Consequently, attempts have been made to improve the performance of biochar in the hydrocarbon-based remediation process through the co-application of biochar with other bioremediation techniques as well as modifying biochar properties before use. Despite the progress made in this domain, there is a lack of a detailed single review consolidating the critical findings, new developments, and challenges in biochar-based remediation of petroleum hydrocarbon-contaminated soil. This review assessed the potential of biochar co-application with other well-known bioremediation techniques such as bioaugmentation, phytoremediation, and biostimulation. Additionally, the benefits of modification in enhancing biochar suitability for bioremediation were examined. It was concluded that biochar co-application generally resulted in higher hydrocarbon removal than sole biochar treatment, with up to a 4-fold higher removal observed in some cases. However, most of the biochar co-applied treatments did not result in hydrocarbon removal that was greater than the additive effects of individual treatment. Overall, compared to their complementary treatments, biochar co-application with bioaugmentation was more beneficial in hydrocarbon removal than biochar co-application with either phytoremediation or biostimulation. Future studies should integrate the ecotoxicological and cost implications of biochar co-application for a viable remediation process. Lastly, improving the synergistic interactions of co-treatment on hydrocarbon removal is critical to capturing the full potential of biochar-based remediation.

Remediation of groundwater contaminated with dye using carbon dots technology: Ecotoxicological and microbial community responses

Groundwater pollution poses a serious threat to the main source of clean water globally. Nanoparticles have the potential for remediation of polluted aquifers; however, environmental safety concerns associated with in situ deployments of such technology include potential detrimental effects on microorganisms in terms of toxicity and functional disruptions. In this work, we evaluated a new and ecofriendly approach using carbon dots (CDs) as Fenton-like catalysts to catalyse the degradation of dye-containing groundwater samples. This investigation aimed at evaluating the efficacy of a novel remediation technology in terms of dye degradation and toxicity reduction while assessing its impacts on aquatic microorganisms. Uncontaminated Australian groundwater samples were spiked with methylene blue and incubated in the dark, at 18 °C, under slow agitation, using CDs at 0.5 mg mL^-1 and H₂O₂ at 73.5 mM for 25 h. The dye degradation rate was determined as well as the toxicity of the treated solutions using the Microtox® bioassay. Further, to determine the changes in the groundwater microbial community, 16 S rRNA sequencing was used and evenness and diversity indices were analysed using Pielou's evenness and Simpson index, respectively. This study revealed that dye-containing groundwater were effectively treated by CDs showing a degradation rate of 78-82% and a significant 4-fold reduction in the toxicity. Characterisation of the groundwater microbiota revealed a predominance of at least 60% Proteobacteria phylum in all samples where diversity and evenness were maintained throughout the remediation process. The results showed that CDs could be an efficient approach to treat polluted groundwater and potentially have minimum impact on the environmental microbiome.

Carbon Dot Therapeutic Platforms: Administration, Distribution, Metabolism, Excretion, Toxicity, and Therapeutic Potential

Ultrasmall nanoparticles are often grouped under the broad umbrella term of "nanoparticles" when reported in the literature. However, for biomedical applications, their small sizes give them intimate interactions with biological species and endow them with unique functional physiochemical properties. Carbon quantum dots (CQDs) are an emerging class of ultrasmall nanoparticles which have demonstrated considerable biocompatibility and have been employed as potent theragnostic platforms. These particles find application for increasing drug solubility and targeting, along with facilitating the passage of drugs across impermeable membranes (i.e., blood brain barrier). Further functionality can be triggered by various environmental conditions or external stimuli (i.e., pH, temperature, near Infrared (NIR) light, ultrasound), and their intrinsic fluorescence is valuable for diagnostic applications. The focus of this review is to shed light on the therapeutic potential of CQDs and identify how they travel through the body, reach their site of action, administer therapeutic effect, and are excreted. Investigation into their toxicity and compatibility with larger nanoparticle carriers is also examined. The future of CQDs for theragnostic applications is promising due to their multifunctional attributes and documented biocompatibility. As nanomaterial platforms become more commonplace in clinical treatments, the commercialization of CQD therapeutics is anticipated.

Biodegradation of novel bioplastics made of starch, polyhydroxyurethanes and cellulose nanocrystals in soil environment

Plastic pollution is recognized as a major environmental problem in many countries. Over the last decade, academics have embraced research on bioplastics to discover newer high-end green materials. However, the end-of-life environmental fate of such materials is not adequately understood. Non-isocyanate polyhydroxyurethanes (PHUs) are green engineering materials with huge potential to replace traditional polyurethanes. Despite this immense potential, a number of questions about their environmental fate remain unanswered. The present study investigated the extent and mechanisms underlying soil biodegradation of PHUs and determined whether the deterioration of PHUs within starch bioplastics (ST) can improve the biodegradation of starch (ST)-PHU hybrids. Soil microbiomes managed to effectively and quickly digest not only PHUs but also ST-PHU hybrids. All ST-PHU hybrids were characterized by exceptional biodegradability with mass losses of up to ~88% following a soil burial time of only 120 days. The biodegradation of ST-alone bioplastics was 69% under identical conditions. The presence of cellulose nanocrystals (CNC) reduced the potential for the soil microbial community to degrade nanohybrids (ST-PHU-CNC). Microbially digested bioplastics with PHU presented less stages of thermal degradation, and reduced intensities of FTIR, NMR and XPS signals compared to the original films, indicating improvement of the biodegradation mechanism. These findings suggested the positive environmental implications of PHU in improving the bioplastic's degradation and their potential for future applications.

Substrate-to-inoculum ratio drives solid-state anaerobic digestion of unamended grape marc and cheese whey

Inoculation dose is a key operational parameter for the solid-state anaerobic digestion (SS-AD) of lignocellulosic biomass, maximum methane recovery, and stable digester performance. The novelty of this study was the co-digestion of unamended full-strength grape marc and cheese whey for peak methane extraction at variable inoculation levels. An acclimatised digestate from a preceding anaerobic treatment was used as a downstream inoculum. The impact of inoculum size (wet weight) was evaluated at 0/10, 5/5, 7/3 and 9/1 substrate-to-inoculum (S/I) ratios, corresponding to an initial concentration of 20-30% total solids (TS) in digesters over 58 days at 45°C. The optimal 7/3 S/I produced the highest cumulative methane yield, 6.45 L CH4 kg-1 VS, coinciding with the lowest initial salinity at 11%; the highest volumetric methane productivity rate of 0.289±0.044 L CH4 LWork-1 d-1; the highest average COD/N ratio of 9.88; the highest final pH of 9.13, and a maximum 15.07% elemental carbon removal; for a lag time of 9.4 days. This study identified an optimal inoculation dose and opens up an avenue for the direct co-digestion of grape marc and cheese whey without requirements for substrate pretreatment, thus improving the overall bioenergy profile of the winery and dairy joint resource recovery operations.

Catalytic degradation of methylene blue using iron and nitrogen-containing carbon dots as Fenton-like catalysts

Carbon dots were modified with iron and nitrogen groups to produce specific surface groups and charge which demonstrated high efficiency for the Fenton-like degradation of methylene blue whilst markedly minimising its effluent toxicity.

Natural attenuation of legacy hydrocarbon spills in pristine soils is feasible despite difficult environmental conditions in the monsoon tropics

The Kimberley region of Western Australia is a National Heritage listed region that is internationally recognised for its environmental and cultural significance. However, petroleum spills have been reported at a number of sites across the region, representing an environmental concern. The region is also characterised as having low soil nutrients, high temperatures and monsoonal rain - all of which may limit the potential for natural biodegradation of petroleum. Therefore, this work evaluated the effect of legacy petroleum hydrocarbons on the indigenous soil microbial community (across the domains Archaea, Bacteria and Fungi) at three sites in the Kimberley region. At each site, soil cores were removed from contaminated and control areas and analysed for total petroleum hydrocarbons, soil nutrients, pH and microbial community profiling (using16S rRNA and ITS sequencing on the Illumina MiSeq Platform). The presence of petroleum hydrocarbons decreased microbial diversity across all kingdoms, altered the structure of microbial communities and increased the abundance of putative hydrocarbon degraders (e.g. Mycobacterium, Acremonium, Penicillium, Bjerkandera and Candida). Microbial community shifts from contaminated soils were also associated with an increase in soil nutrients (notably Colwell P and S). Our study highlights the long-term effect of legacy hydrocarbon spills on soil microbial communities and their diversity in remote, infertile monsoonal soils, but also highlights the potential for natural attenuation to occur in these environments.

Dynamic Effect of Operational Regulation on the Mesophilic BioMethanation of Grape Marc

Wine production annually generates an estimated 11 million metric tonnes of grape marc (GM) worldwide. The diversion of this organic waste away from landfill and towards its use in the generation of renewable energy has been investigated. This study aimed to evaluate the effectiveness of operational parameters relating to the treatment regime and inoculum source in the extraction of methane from GM under unmixed anaerobic conditions at 35 °C. The study entailed the recirculation of a previously acclimated sludge (120 days) as downstream inoculum, an increased loading volume (1.3 kg) and a low substrate-to-inoculum ratio (10:3 SIR). The results showed that an incorporation of accessible operational controls can effectively enhance cumulative methane yield (0.145 m³ CH₄ kg⁻¹ VS), corresponding to higher amounts of digestible organics converted. The calculated average volumetric methane productivity equalled 0.8802 L CH₄ L_Work⁻¹ d⁻¹ over 33.6 days whilst moderate pollutant removal (43.50% COD removal efficiency) was achieved. Molecular analyses identified Firmicutes and Bacteroidetes phyla as core organisms for hydrolytic and fermentative stages in trophic relationships with terminal electron acceptors from the methane-producing Methanosarcina genus. Economic projections established that the cost-effective operational enhancements were sustainable for valorisation from grape marc by existing wineries and distilleries.

Can biochar be an effective and reliable biostimulating agent for the remediation of hydrocarbon-contaminated soils?

Petroleum hydrocarbons represent one of the most common soil contaminants, whose presence poses a significant risk to soil biota and human health; for example, in Europe, hydrocarbon contamination accounts for more than 30% of contaminated sites. The use of biochar as a proposed alternative to the conventional remediation of soil contaminated with petroleum hydrocarbons has gained credence in recent times because of its cost-effectiveness and environmentally friendly nature. Biochar is a carbonaceous material produced by heating biomass in an oxygen-limited environment at high temperature. This review provides an overview of the application of biochar to remediate petroleum hydrocarbon-contaminated soils, with emphasis on the possibility of biochar functioning as a biostimulation agent. The properties of biochar were also examined. Furthermore, the mechanism, ecotoxicological impact and possible factors affecting biochar-based remediation are discussed. The review concludes by examining the drawbacks of biochar use in the remediation of hydrocarbon-contaminated soils and how to mitigate them. Biochar impacts soil microbes, which may result in the promotion of the degradation of petroleum hydrocarbons in the soil. Linear regression between bacterial population and degradation efficiency showed that R² was higher (0.50) and significant in treatment amended with biochar or both biochar and nutrient/fertiliser (p < 0.01), compared to treatment with nutrient/fertiliser only or no amendment (R² = 0.11). This suggest that one of the key impacts of biochar is enhancing microbial biomass and thus the biodegradation of petroleum hydrocarbons. Biochar represents a promising biostimulation agent for the remediation of hydrocarbon-contaminated soil. However, there remains key questions to be answered.

The application of Marinobacter hydrocarbonoclasticus as a bioaugmentation agent for the enhanced treatment of non-sterile fish wastewater

Wastewaters generated by fish processing are characterised by salt concentrations similar to or greater than that of seawater together with high nutrient concentrations (e.g. organic carbon and total nitrogen) due to the presence of blood, oil, and fish tissues. Fish processing wastewater entering rivers and oceans have become a key factor leading to the pollution of receiving waters; the adequate treatment of this wastewater is, therefore, crucial to a sustainable fish industry. The present study aimed to determine whether augmentation of fish wastewater with either Marinirhabdus sp., Marinobacter hydrocarbonoclasticus or a consortium of the two halobacteria, could successfully enhance the removal of both chemical oxygen demand (COD) and total nitrogen (TN) from fish wastewater. Following 9 days of incubation, the bioaugmentation treatment resulted in a significant reduction in COD, 88%, 91%, and 92% in fish wastewater augmented with either Marinirhabdus sp., Marinobacter hydrocarbonoclasticus respectively, or a consortium of the two halobacteria compared with the control (non-bioaugmented) treatment (77% removal). In tall bioaugmentation treatments (79-88%) TN removal was also significantly greater than the control treatment (57%). After 9 days of incubation, the COD and TN in bioaugmentation reached the European Union's (EU) wastewater discharge standard (Level B, COD < 120 mg L^-1, TN < 70 mg L^-1). The addition of monoculture was effective in enhancing the removal of COD, while co-culture significantly improved TN removal. Results of 16S rDNA sequence analysis investigating the survival of these introduced bacteria showed that only Marinobacter hydrocarbonoclasticus was detected at the end of the treatment, constituting 36% of the total bacterial population when added alone to the wastewater. This study confirms the effectiveness of bioaugmentation in removing COD and TN in saline fish wastewater. The ability of Marinobacter hydrocarbonclasticus to enhance the treatment and dominate the bacterial community suggests the commercial potential of this organism for bioaugmentation of aquaculture wastewater without the need for further bioaugmentation.

Fluorescent Magnesium Hydroxide Nanosheet Bandages with Tailored Properties for Biocompatible Antimicrobial Wound Dressings and pH Monitoring

Magnesium hydroxide (Mg(OH)₂) is hailed as a cheap and biocompatible material with antimicrobial potential; however, research aimed at instilling additional properties and functionality to this material is scarce. In this work, we synthesized novel, fluorescent magnesium hydroxide nanosheets (Mg(OH)₂-NS) with a morphology that closely resembles that of graphene oxide. These multifunctional nanosheets were employed as a potent antimicrobial agent against several medically relevant bacterial and fungal species, particularly on solid surfaces. Their strong fluorescence signature correlates to their hydroxide makeup and can therefore be used to assess their degradation and functional antimicrobial capacity. Furthermore, their pH-responsive change in fluorescence can potentially act as a pH probe for wound acidification, which is characteristic of healthy wound healing. These fluorescent antimicrobial nanosheets were stably integrated into biocompatible electrospun fibers and agarose gels to add functionality to the material. This reinforces the suitability of the material to be used as antimicrobial bandages and gels. The biocompatibility of the Mg(OH)₂-NS for topical medical applications was supported by its noncytotoxic action on human keratinocyte (HaCaT) cells.

Application of Co-Culture Technology to Enhance Protease Production by Two Halophilic Bacteria, Marinirhabdus sp. and Marinobacter hydrocarbonoclasticus

Although axenic microbial cultures form the basis of many large successful industrial biotechnologies, the production of single commercial microbial strains for use in large environmental biotechnologies such as wastewater treatment has proved less successful. This study aimed to evaluate the potential of the co-culture of two halophilic bacteria, Marinirhabdus sp. and Marinobacter hydrocarbonoclasticus for enhanced protease activity. The co-culture was significantly more productive than monoculture (1.6–2.0 times more growth), with Marinobacter hydrocarbonoclasticus being predominant (64%). In terms of protease activity, enhanced total activity (1.8–2.4 times) was observed in the co-culture. Importantly, protease activity in the co-culture was found to remain active over a much broader range of environmental conditions (temperature 25 °C to 60 °C, pH 4–12, and 10–30% salinity, respectively). This study confirms that the co-culturing of halophilic bacteria represents an economical approach as it resulted in both increased biomass and protease production, the latter which showed activity over arange of environmental conditions.

The effects of vehicular emissions on the activity and diversity of the roadside soil microbial community

Motor vehicles emit a variety of pollutants including metals, petroleum hydrocarbons and polycyclic aromatic hydrocarbons (PAHs). The relationships between metals, petroleum hydrocarbons and PAHs, soil respiration and microbial diversity (fungi and bacteria) were studied using control (n = 3) and roadside soils (n = 27) with different exposure periods to vehicle emissions (2-63 years). Bacterial diversity was found to be higher than control sites (P = 0.002) but was the same across different categories of road age (P = 0.328). Significant (r = -0.49, P = 0.007) contrasting behaviour of fungal and bacterial diversity was reported, with diversity increasing across all road types for bacteria and decreasing across all road types for fungi compared to control soils. Analysis of the bacterial community identified three distinct clusters, separated on age of contamination, suggesting that roadside bacterial communities change over time with pollution from vehicles with the potential development of metal resistant bacteria in roadside soils. In contrast, for fungal communities, a reduction in diversity with time of exposure to roadside vehicle emissions was observed suggesting the potential for reduced ecosystem functionality and soil health in roadside soils. This is the first study in the published literature to include both bacterial and fungal responses from aged roadside soils. The results from this study suggest that normal functionality of soil ecosystem services is being affected in roadside soils, potentially globally.

Review: Trends in point-of-care diagnosis for Escherichia coli O157:H7 in food and water

Escherichia coli O157:H7, a Shiga-producing E. coli is a major pathogenic E. coli strain which since the early 1980s has become a crucial food and water-borne pathogen. Several management strategies can be applied to control the spread of infection; however early diagnosis represents the optimum preventive strategy to minimize the infection. Therefore, it is crucial to detect this pathogen in a fast and efficient manner in order to reduce the morbidity and mortality. Currently used gold standard tests rely on culture and pre-enrichment of E. coli O157:H7 from the contaminated source; they are time consuming and laborious. Molecular methods such as polymerase chain reaction are sensitive; however, they require expensive instrumentation. Therefore, there is a requirement for Accurate, Sensitive, Specific, User friendly, Rapid, Equipment free and Deliverable (ASSURED) detection methods for use in the laboratory and in the field. Emerging technologies such as isothermal amplification methods, biosensors, surface enhanced Raman Spectroscopy, paper-based diagnostics and smartphone-based digital methods are recognized as new approaches in the field of E. coli O157:H7 diagnostics and are discussed in this review. Mobile PCR and CRISPR-Cas diagnostic platforms have been identified as new tools in E. coli O157:H7 POC diagnostics with the potential for implementation by industry. This review describes advances and progress in the field of E. coli O157:H7 diagnosis in the context of food and water industry. The focus is on emerging high throughput point-of-care (POC) E. coli O157:H7 diagnostics and the requirement for the transformation to service routine diagnostics in the food and water industry.

Long-term Impact of Gold and Platinum on Microbial Diversity in Australian Soils

The effects of platinum (Pt) and gold (Au) and on the soil bacterial community was evaluated in four different Australian soil types (acidic Burn Grounds (BGR), organic matter-rich Fox Lane, high silt/metal Pinpinio (PPN), and alkali Minnipa (MNP) spiked with either Pt or Au at 1, 25, and 100 mg kg^-1 using a next-generation sequencing approach (amplicon-based, MiSeq). Soil type and metal concentrations were observed to be key drivers of Pt and Au effects on soil microbial community structure. Different trends were therefore observed in the response of the bacterial community to Pt and Au amendments; however in each soil type, Pt and Au amendment caused a detectable shift in community structure that in most samples was positively correlated with increasing metal concentrations. New dominant groups were only observed in BGR and PPN soils at 100 mg kg^-1 (Kazan-3B-28 and Verrucomicrobia groups (BGR, Pt) and Firmicutes and Caldithrix groups (PPN, Pt) and WS2 (BGR, Au). The effects of Pt on soil microbial diversity were largely adverse at 100 mg kg^-1 and were pronounced in acidic, basic, and metal/silt-rich soils. However, this effect was concentration-related; Au appeared to be more toxic to soil bacterial communities than Pt at 25 mg kg^-1 but Pt was more toxic at 100 mg kg^-1. More bacterial groups such as those belonging to Burkholderiales/Burkholderiaceae, Alicyclobacillaceae, Rubrobacteraceae, Cytophagaceae, Oxalobacteraceae were selectively enriched by Pt compared to Au (Sphingomonadaceae and Rhodospirillaceae) amendments irrespective of soil type. The research outcomes have important implications in the management (remediation) of Pt- and Au-contaminated environments.

Detection and identification of polyaromatic hydrocarbons (PAHs) contamination in soil using intrinsic fluorescence

Polyaromatic hydrocarbons (PAHs), such as pyrene, benzo[a]pyrene, phenanthrene, and anthracene induce toxic, carcinogenic, and mutagenic effects on living organisms and are considered as primary pollutants. Traditional methods for their identification are often laborious and time-consuming and do not account for the heterogeneous nature of their distribution. Here we present confocal microscopy as a rapid and accurate technique for direct analysis of PAHs in soil samples without the complexity of sample pre-processing which might delay results for several days. The method uses the intrinsic fluorescence of PAHs for detection and their emission spectra for the identification of different PAHs. A clear difference was observed in the fluorescence spectral properties of phenanthrene, pyrene and naphthalene in real-time environmental samples. The post-processing of confocal scans obtained in the detection stage of PAHs was completed through the application of ImageJ software. Intrinsic fluorescence-based detections of PAHs may open new avenues in terms of rapid detection and identification of PAHs in heterogeneous complex soil samples.

Evaluation and comparison of recombinase polymerase amplification coupled with lateral-flow bioassay for Escherichia coli O157:H7 detection using diifeerent genes

Shiga toxin-producing Escherichia coli serotype O157:H7 is a food and waterborne zoonotic pathogen causing gastroenteritis in humans. Rapid and simple detection in water and food is imperative to control its spread. However, traditional microbial detection approaches are time-consuming, expensive and complex to operate at the point-of-care without professional training. We present a rapid, simple, sensitive, specific and portable method for detection of E. coli O157:H7 in drinking water, apple juice and milk. We evaluated the effect of gene selection in detecting E. coli O157:H7 using recombinase polymerase amplification coupled with a lateral flow assay using rfbE, fliC and stx gene targets. As low as 100 ag and 1 fg DNA, 4-5 CFU/mL and 10¹ CFU/mL of E. coli O157:H7 was detected using the stx and rfbE gene targets respectively with 100% specificity, whilst the detection limit was 10 fg DNA and 10² CFU/mL for the fliC gene target, with 72.8% specificity. The RPA-LFA can be completed within 8 min at temperatures between 37 and 42 °C with reduced handling and simple equipment requirements. The test threshold amplification of the target was achieved in 5-30 min of incubation. In conclusion, RPA-LFA represents a potential rapid and effective alternative to conventional methods for the monitoring of E. coli O157:H7 in food and water.

Challenges and Current Status of the Biological Treatment of PFAS-Contaminated Soils

Per- and polyfluoroalkyl substances (PFAS) are Synthetic Organic Compounds (SOCs) which are of current concern as they are linked to a myriad of adverse health effects in mammals. They can be found in drinking water, rivers, groundwater, wastewater, household dust, and soils. In this review, the current challenge and status of bioremediation of PFAs in soils was examined. While several technologies to remove PFAS from soil have been developed, including adsorption, filtration, thermal treatment, chemical oxidation/reduction and soil washing, these methods are expensive, impractical for in situ treatment, use high pressures and temperatures, with most resulting in toxic waste. Biodegradation has the potential to form the basis of a cost-effective, large scale in situ remediation strategy for PFAS removal from soils. Both fungal and bacterial strains have been isolated that are capable of degrading PFAS; however, to date, information regarding the mechanisms of degradation of PFAS is limited. Through the application of new technologies in microbial ecology, such as stable isotope probing, metagenomics, transcriptomics, and metabolomics there is the potential to examine and identify the biodegradation of PFAS, a process which will underpin the development of any robust PFAS bioremediation technology.

Review of the interactions between vehicular emitted potentially toxic elements, roadside soils, and associated biota

Given the large size of the world road network, the land area affected by vehicular emissions is extensive. This review provides the first global picture of the relationships between vehicular emitted potentially toxic elements, roadside soils, and risks to associated biota. The following potentially toxic elements that accumulate in roadside soils have been examined in this review: As, Co, Cr, Cu, Mn, Mo, Ni, Pb, Pd, Pt, Rh, Se, Sb, Sn, Sr, Ti and Zn. The meta-analysis undertaken demonstrated an increase in concentrations of Cd, Pb, Zn, Pt, Pd and Rh in roadside soils compared to the mean global crustal concentrations. Positive correlations between potentially toxic element concentrations in roadside soil, plants, microbes, and animals were observed. Roadside studies have found increased potentially toxic element concentrations in plants and animals with increasing proximity to roads. The mean concentrations of Pb in roadside plants and vertebrates were at values above the World Health Organisation guidelines. Research has shown a range of impacts of potentially toxic elements in roadside soils on microbial activity including decreased litter decomposition, nitrogen fixation, nutrient cycling and enzyme synthesis. However, aside from the impact on microbial communities, there has been little research investigating the impacts of roadside soil elements on the associated biota. Thus, there is a need for research that investigates the toxicity of elements in roadside soils to plants and animals and to investigate the transfer of roadside elements through the food chain, and thus, risks posed to human health and the environment.

First Report of CRISPR/Cas9 Mediated DNA-Free Editing of 4CL and RVE7 Genes in Chickpea Protoplasts

The current genome editing system Clustered Regularly Interspaced Short Palindromic Repeats Cas9 (CRISPR/Cas9) has already confirmed its proficiency, adaptability, and simplicity in several plant-based applications. Together with the availability of a vast amount of genome data and transcriptome data, CRISPR/Cas9 presents a massive opportunity for plant breeders and researchers. The successful delivery of ribonucleoproteins (RNPs), which are composed of Cas9 enzyme and a synthetically designed single guide RNA (sgRNA) and are used in combination with various transformation methods or lately available novel nanoparticle-based delivery approaches, allows targeted mutagenesis in plants species. Even though this editing technique is limitless, it has still not been employed in many plant species to date. Chickpea is the second most crucial winter grain crop cultivated worldwide; there are currently no reports on CRISPR/Cas9 gene editing in chickpea. Here, we selected the 4-coumarate ligase (4CL) and Reveille 7 (RVE7) genes, both associated with drought tolerance for CRISPR/Cas9 editing in chickpea protoplast. The 4CL represents a key enzyme involved in phenylpropanoid metabolism in the lignin biosynthesis pathway. It regulates the accumulation of lignin under stress conditions in several plants. The RVE7 is a MYB transcription factor which is part of regulating circadian rhythm in plants. The knockout of these selected genes in the chickpea protoplast using DNA-free CRISPR/Cas9 editing represents a novel approach for achieving targeted mutagenesis in chickpea. Results showed high-efficiency editing was achieved for RVE7 gene in vivo compared to the 4CL gene. This study will help unravel the role of these genes under drought stress and understand the complex drought stress mechanism pathways. This is the first study in chickpea protoplast utilizing CRISPR/Cas9 DNA free gene editing of drought tolerance associated genes.

Co-Digestion of Grape Marc and Cheese Whey at High Total Solids Holds Potential for Sustained Bioenergy Generation

At the end of fermentation, wine contains approximately 20% (w/v) of solid material, known as grape marc (GM), produced at a yield of 2 t/ha. Cheese manufacture produces cheese whey (CW), which is over 80% of the processed milk, per unit volume. Both waste types represent an important fraction of the organic waste being disposed of by the wine and dairy industries. The objective of this study was to investigate the bioenergy potential through anaerobic codigestion of these waste streams. The best bioenergy profile was obtained from the digestion setups of mixing ratio 3/1 GM/CW (wet weight/wet weight). At this ratio, the inhibitory salinity of CW was sufficiently diluted, resulting in 23.73% conversion of the organic material to methane. On average, 64 days of steady bioenergy productivity was achieved, reaching a maximum of 85 ± 0.4% CH₄ purity with a maximum cumulative methane yield of 24.4 ± 0.11 L CH₄ kg⁻¹ VS. During the fermentation there was 18.63% CODt removal, 21.18% reduction of conductivity whilst salinity rose by 36.19%. It can be concluded that wine and dairy industries could utilise these waste streams for enhanced treatment and energy recovery, thereby developing a circular economy.

Impact of necrophytoremediation on petroleum hydrocarbon degradation, ecotoxicity and soil bacterial community composition in diesel-contaminated soil

Hydrocarbon degradation is usually measured in laboratories under controlled conditions to establish the likely efficacy of a bioremediation process in the field. The present study used greenhouse-based bioremediation to investigate the effects of natural attenuation (NA) and necrophytoremediation (addition of pea straw (PS)) on hydrocarbon degradation, toxicity and the associated bacterial community structure and composition in diesel-contaminated soil. A significant reduction in total petroleum hydrocarbon (TPH) concentration was detected in both treatments; however, PS-treated soil showed more rapid degradation (87%) after 5 months together with a significant reduction in soil toxicity (EC50 = 91 mg diesel/kg). Quantitative PCR analysis revealed an increase in the number of 16S rRNA and alkB genes in the PS-amended soil. Substantial shifts in soil bacterial community were observed during the bioremediation, including an increased abundance of numerous hydrocarbon-degrading bacteria. The bacterial community shifted from dominance by Alphaproteobacteria and Gammaproteobacteria in the original soil to Actinobacteria during bioremediation. The dominance of two genera of bacteria, Sphingobacteria and Betaproteobacteria, in both NA- and PS-treated soil demonstrated changes occurring within the soil bacterial community through the incubation period. Additionally, pea straw itself was found to harbour a diverse hydrocarbonoclastic community including Luteimonas, Achromobacter, Sphingomonas, Rhodococcus and Microbacterium. At the end of the experiment, PS-amended soil exhibited reduced ecotoxicity and increased bacterial diversity as compared with the NA-treated soil. These findings suggest the rapid growth of species stimulated by the bioremediation treatment and strong selection for bacteria capable of degrading petroleum hydrocarbons during necrophytoremediation. Graphical abstract.

The Nutritional and Pharmacological Potential of New Australian Thraustochytrids Isolated from Mangrove Sediments

Mangrove sediments represent unique microbial ecosystems that act as a buffer zone, biogeochemically recycling marine waste into nutrient-rich depositions for marine and terrestrial species. Marine unicellular protists, thraustochytrids, colonizing mangrove sediments have received attention due to their ability to produce large amounts of long-chain ω3-polyunsaturated fatty acids. This paper represents a comprehensive study of two new thraustochytrids for their production of valuable biomolecules in biomass, de-oiled cakes, supernatants, extracellular polysaccharide matrixes, and recovered oil bodies. Extracted lipids (up to 40% of DW) rich in polyunsaturated fatty acids (up to 80% of total fatty acids) were mainly represented by docosahexaenoic acid (75% of polyunsaturated fatty acids). Cells also showed accumulation of squalene (up to 13 mg/g DW) and carotenoids (up to 72 µg/g DW represented by astaxanthin, canthaxanthin, echinenone, and β-carotene). Both strains showed a high concentration of protein in biomass (29% DW) and supernatants (2.7 g/L) as part of extracellular polysaccharide matrixes. Alkalinization of collected biomass represents a new and easy way to recover lipid-rich oil bodies in the form of an aqueous emulsion. The ability to produce added-value molecules makes thraustochytrids an important alternative to microalgae and plants dominating in the food, pharmacological, nutraceutical, and cosmetics industries.

Interfacial separation of concentrated dye mixtures from solution with environmentally compatible nitrogenous-silane nanoparticles modified with Helianthus annuus husk extract

The capacity of an adsorbent to bind and remove dye from solution greatly depends on the type of functionalization present on the nanoparticles surface, and its interaction with the dye molecules. Within this study, nitrogenous silane nanoparticles were hydrothermally synthesized resulting in the formation of rapid and highly efficient adsorbents for concentrated mixed dyes. The amorphous silane nanoparticles exhibited a monolayer based mechanism of mixed dye adsorption with removal capacities between 416.67 and 714.29 mg/g of adsorbent. Dye removal was predominantly due to the electrostatic attraction between the positively charged silane nanoparticles (13.22-8.20 mV) and the negatively charged dye molecules (-54.23 mV). Addition of H. annuus extract during synthesis resulted in three times the surface area and 10 times increased pore volume compared to the positive control. XPS analysis showed that silane treatments had various nitrogen containing functionalities at their surface responsible for binding dye. The weak colloidal stability of silane particles (13.22-8.20 mV) was disrupted following dye binding, resulting in their rapid coagulation and flocculation which facilitated the separation of bound dye molecules from solution. The suitability for environmental applications using these treatments was supported by a bacterial viability assay showing >90% cell viability in treated dye supernatants.

A comparative study of biological activated carbon based treatments on two different types of municipal reverse osmosis concentrates

A study was conducted to understand the impact of reverse osmosis concentrate (ROC) characteristics on the efficacy of biological activated carbon (BAC) based treatments for removing organics and nutrients from two ROC streams (ROC_a derived from municipal waste input with high salinity, and ROC_b derived from domestic waste plus industrial trade waste with markedly lower salinity). Fluorescence excitation and emission matrix spectra and molecular weight analysis demonstrated that ROC_a and ROC_b had a significantly different composition of organic compounds due to the petrochemical processing and abattoir waste compounds in ROC_b. Although the sequence of coagulation, UV/H₂O₂ and BAC gave the highest organic removal from the two ROCs (67% DOC for ROCa and 62% for ROCb), UV/H₂O₂ followed by BAC achieved satisfactory removal (>55%) for both ROC types. Sequential treatment involving coagulation gave better phosphorus removal (>90%) than any single treatment (<65%). Total nitrogen (TN) removal was fairly low (<50%) for all the treatment options and the salinity level had insignificant impact on nitrogen removal. Analysis of bacterial communities suggested that higher phosphorus removal and lower total nitrogen and nitrate removal from ROC_b than ROC_a was related to the presence of various denitrifying or phosphorus accumulating bacteria in the BAC.

The toxicity of non-aged and aged coated silver nanoparticles to the freshwater shrimp Paratya australiensis

Nanoparticles (NPs) transform in the environment which result in alterations to their physicochemical properties. However, the effects of aging on the toxicity of NPs to aquatic organisms remain to be determined. Further the reports that have been published present contradictory results. The aim of this study was to examine the stability of differently coated silver nanoparticles (AgNPs) in media and the influence of aging of these NP on potential toxicity to freshwater shrimp Paratya australiensis. Coating-dependent changes in the stability of AgNP were observed with aging. Curcumin (C) coated AgNPs were stable, while tyrosine (T) coated AgNPs and epigallocatechin gallate (E) coated AgNPs aggregated in the P. australiensis medium. Increased lipid peroxidation and catalase activity was noted in P. australiensis exposed to AgNPs, suggesting oxidative stress was associated with NP exposure. The enhanced oxidative stress initiated by aged C-AgNPs suggests that aging of these NPs produced different toxicological responses. In summary, data suggest that coating-dependent alterations in NPs, together with aging affect both persistence and subsequent toxicity of NPs to freshwater organisms. Thus, the coating-dependent fate and toxicity of AgNPs together with the effect of their aging need to be considered in assessing the environmental risk of AgNPs to aquatic organisms.

Green synthesis of Opuntia-derived carbon nanodots for the catalytic decolourization of cationic dyes

Carbon nanodots, rich in functional groups and synthesised using green precursors, catalyse the decolourization of dyes under mild conditions.

The Toxicity of Nanoparticles to Organisms in Freshwater

Nanotechnology is a rapidly growing industry yielding many benefits to society. However, aquatic environments are at risk as increasing amounts of nanoparticles (NPs) are contaminating waterbodies causing adverse effects on aquatic organisms. In this review, the impacts of environmental exposure to NPs, the influence of the physicochemical characteristics of NPs and the surrounding environment on toxicity and mechanisms of toxicity together with NP bioaccumulation and trophic transfer are assessed with a focus on their impacts on bacteria, algae and daphnids. We identify several gaps which need urgent attention in order to make sound decisions to protect the environment. These include uncertainty in both estimated and measured environmental concentrations of NPs for reliable risk assessment and for regulating the NP industry. In addition toxicity tests and risk assessment methodologies specific to NPs are still at the research and development stage. Also conflicting and inconsistent results on physicochemical characteristics and the fate and transport of NPs in the environment suggest the need for further research. Finally, improved understanding of the mechanisms of NP toxicity is crucial in risk assessment of NPs, since conventional toxicity tests may not reflect the risks associated with NPs. Behavioural effects may be more sensitive and would be efficient in certain situations compared with conventional toxicity tests due to low NP concentrations in field conditions. However, the development of such tests is still lacking, and further research is recommended.

Incorporation of quantum carbon dots into a PVP/ZnO hydrogel for use as an effective hexavalent chromium sensing platform

Hydrogels offer a unique medium for sensing applications as they can draw upon the benefits of both solid and liquid sensing platforms. Incorporation of functionalised fluorescent nanoparticles within the hydrogel matrix results in a three-dimensional nanocomposite capable of interacting with water-soluble analytes, facilitating quantitative sensing applications. Here, we report the solvothermal synthesis of a novel Polyvinylpyrrolidone assembled hydrogel stabilised with zinc oxide quantum dots which does not require additional organic crosslinkers. Functionalization of these hydrogel with novel, brightly photoluminescent 2-amino-2-methyl-1-propanol quantum carbon dots (quantum yield of 62.5%) results in a composite capable of specific interaction with hexavalent chromium. Quantitative fluorescence quenching measurements of the hydrogel composite in the presence of hexavalent chromium shows a limit of detection of 1.2 μM Cr⁶⁺ which is below maximum allowable concentrations for drinking water. The hydrogel composite is cheap to manufacture and can be injected into 96 well plates for high throughput analysis of environmental water samples. These results are encouraging for the development of hydrogels and polymetric films to be used as novel fluorescent sensing platforms for environmental diagnostic applications.

The Toxicity of Nonaged and Aged Coated Silver Nanoparticles to Freshwater Alga Raphidocelis subcapitata

The transformation of coated silver nanoparticles (AgNPs) and their impacts on aquatic organisms require further study. The present study investigated the role of aging on the transformation of differently coated AgNPs and their sublethal effects on the freshwater alga Raphidocelis subcapitata. The stability of AgNPs was evaluated over 32 d, and the results indicated that transformation of AgNPs occurred during the incubation; however, coating-specific effects were observed. Fresh AgNPs increased reactive oxygen species (ROS) formation, whereas aged AgNPs induced excessive ROS generation compared with their fresh counterparts. Increased ROS levels caused increased lipid peroxidation (LPO) in treatment groups exposed to both fresh and aged NPs, although LPO was comparatively higher in algae exposed to aged AgNPs. The observed increase in catalase (CAT) activity of algal cells was attributed to early stress responses induced by excessive intracellular ROS generation, and CAT levels were higher in the aged NP treatment groups. In conclusion, AgNPs increased ROS levels and LPO in algae and caused the activation of antioxidant enzymes such as CAT. Overall, the results suggest that aging and coating of AgNPs have major impacts on AgNP transformation in media and their effects on algae. Environ Toxicol Chem 2019;38:2371-2382. © 2019 SETAC.

The impact of lead co-contamination on ecotoxicity and the bacterial community during the bioremediation of total petroleum hydrocarbon-contaminated soils

The continued increase in the global demand for oil, which reached 4,488 Mtoe in 2018, leads to large quantities of petroleum products entering the environment posing serious risks to natural ecosystems if left untreated. In this study, we evaluated the impact of co-contamination with lead on the efficacy of two bioremediation processes, natural attenuation and biostimulation of Total Petroleum Hydrocarbons (TPH) as well as the associated toxicity and the changes in the microbial community in contaminated soils. The biostimulated treatment resulted in 96% and 84% reduction in TPH concentration in a single and a co-contamination scenario, respectively, over 28 weeks of a mesocosm study. This reduction was significantly more in comparison to natural attenuation in a single and a co-contamination scenario, which was 56% and 59% respectively. In contrast, a significantly greater reduction in the associated toxicity of in soils undergoing natural attenuation was evident compared with soils undergoing biostimulation despite the lower TPH degradation when bioassays were applied. The earthworm toxicity test showed a decrease of 72% in the naturally attenuated toxicity versus only 62% in the biostimulated treatment of a single contamination scenario. In a co-contamination scenario, toxicity decreased only 30% and 8% after natural attenuation and biostimulation treatments, respectively. 16s rDNA sequence analysis was used to assess the impact of both the co-contamination and the bioremediation treatment. NGS data revealed major bacterial domination by Nocardioides spp., which reached 40% in week 20 of the natural attenuation treatment. In the biostimulated soil samples, more than 50% of the bacterial community was dominated by Alcanivorax spp. in week 12. The presence of Pb in the natural attenuation treatment resulted in an increased abundance of a few Pb-resistant genera such as Sphingopyxis spp. and Thermomonas spp in addition to Nocardioides spp. In contrast, Pb co-contamination completely shifted the bacterial pattern in the stimulated treatment with Pseudomonas spp. comprising approximately 45% of the bacterial profile in week 12. This study confirms the effectiveness of biostimulation over natural attenuation in remediating TPH and TPH-Pb contaminated soils. In addition, the presence of co-contaminants (e.g. Pb) results in serious impacts on the efficacy of bioremediation of TPH in contaminated soils, which must be considered prior to designing any bioremediation strategy.

Petroleum Hydrocarbon Contamination in Terrestrial Ecosystems-Fate and Microbial Responses

Petroleum hydrocarbons represent the most frequent environmental contaminant. The introduction of petroleum hydrocarbons into a pristine environment immediately changes the nature of that environment, resulting in reduced ecosystem functionality. Natural attenuation represents the single, most important biological process which removes petroleum hydrocarbons from the environment. It is a process where microorganisms present at the site degrade the organic contaminants without the input of external bioremediation enhancers (i.e., electron donors, electron acceptors, other microorganisms or nutrients). So successful is this natural attenuation process that in environmental biotechnology, bioremediation has developed steadily over the past 50 years based on this natural biodegradation process. Bioremediation is recognized as the most environmentally friendly remediation approach for the removal of petroleum hydrocarbons from an environment as it does not require intensive chemical, mechanical, and costly interventions. However, it is under-utilized as a commercial remediation strategy due to incomplete hydrocarbon catabolism and lengthy remediation times when compared with rival technologies. This review aims to describe the fate of petroleum hydrocarbons in the environment and discuss their interactions with abiotic and biotic components of the environment under both aerobic and anaerobic conditions. Furthermore, the mechanisms for dealing with petroleum hydrocarbon contamination in the environment will be examined. When petroleum hydrocarbons contaminate land, they start to interact with its surrounding, including physical (dispersion), physiochemical (evaporation, dissolution, sorption), chemical (photo-oxidation, auto-oxidation), and biological (plant and microbial catabolism of hydrocarbons) interactions. As microorganism (including bacteria and fungi) play an important role in the degradation of petroleum hydrocarbons, investigations into the microbial communities within contaminated soils is essential for any bioremediation project. This review highlights the fate of petroleum hydrocarbons in tertial environments, as well as the contributions of different microbial consortia for optimum petroleum hydrocarbon bioremediation potential. The impact of high-throughput metagenomic sequencing in determining the underlying degradation mechanisms is also discussed. This knowledge will aid the development of more efficient, cost-effective commercial bioremediation technologies.

Viability determination of Ascaris ova in raw wastewater: a comparative evaluation of culture-based, BacLight Live/Dead staining and PMA-qPCR methods

Accurate evaluation of viable Ascaris ova in wastewater is the key to mitigating Ascaris reinfections in endemic regions. In this study, the viability of Ascaris ova in raw wastewater was determined using three different detection methods: culture-based, BacLight Live/Dead staining and propidium monoazide-quantitative polymerase chain reaction (PMA-qPCR). Furthermore, comparative assessment of viability utilising the aforementioned detection methods was performed using seeded experiments in wastewater. The percentage of viability was: culture-based (82%), BacLight Live/Dead staining (87%) and PMA-qPCR (85%) respectively. Despite the fact that no statistical difference was shown in the viability determination among the three methods, PMA-qPCR-based viability determination would be preferable over the other two methods for evaluating potential public health risks with A. suum ova due to its accuracy, being least subjective and its rapid reaction time.

Elucidation of the microbial diversity in rivers in south-west Victoria, Australia impacted by rural agricultural contamination (dairy farming)

We assessed the water quality of south-west Victorian rivers impacted by the dairy industry using traditional water quality assessment together with culture-dependent (colilert/enterolert) and also culture-independent (next generation sequencing) microbial methods. The aim of the study was to identify relationships/associations between dairy farming intensity and water contamination. Water samples with high total and faecal coliforms (>1000 MPN cfu/100 ml), and with high nitrogen levels (TN) were observed in zones with a high proportion of dairy farming. Members of the genus Nitrospira, Rhodobacter and Rhodoplanes were predominant in such high cattle density zones. Samples from sites in zones with lower dairy farming activities registered faecal coliform numbers within the permissible limits (<1000 MPN cfu/100 ml) and showed the presence of a wide variety of microorganisms. However, no bacterial pathogens were found in the river waters regardless of the proportion of cattle. The data suggests that using the spatially weighted proportion of land used for dairy farming is a useful way to target at-risk sub-catchments across south west Victoria; further work is required to confirm that this approach is applicable in other regions.

Influence of bioaugmentation and biostimulation on PAH degradation in aged contaminated soils: Response and dynamics of the bacterial community

Polycyclic aromatic hydrocarbons (PAHs) represent a group of hazardous compounds that are ubiquitous and persistent. The main aim of this study was to investigate the degradation of PAHs in chronically contaminated, aged and weathered soils obtained from a former gas plant of Australia. Biostimulation and bioaugmentation using individual isolates (Rhodococcus sp. (NH2), Achromobacter sp. (NH13), Oerskovia paurometabola (NH11), Pantoea sp. (NH15), Sejongia sp. (NH20), Microbacterium maritypicum (NH30) and Arthrobacter equi (NH21)) and a consortium of these isolates were tested during mesocosm studies. A significant reduction (99%) in PAH concentration was observed in all the treatments. In terms of the abundance of PAH-degrading genes and microbial community structure during PAH degradation, qPCR results revealed that Gram-positive bacteria were dominant over other bacterial communities in all the treatments. 16S sequencing results revealed that the inoculated organisms did not establish themselves during the treatment. However, substantial bacterial community changes during the treatments were observed, suggesting that the natural community exhibited sufficient resilience and diversity to enable an active, but changing degrading community at all stages of the degradation process. Consequently, biostimulation is proposed as the best strategy to remediate PAHs in aged, weathered and chronically contaminated soils.

Introduction into nanotechnology and microbiology

The current chapter summaries the world of Microbiology and boom of Nanotechnology and how both the exciting fields come together to help men kind with various new applications in water, food, medical biology and immunology. Furthermore synthesis of nano materials utilising the potential of microorganisms also opens a newer avenue for 'green' synthesis.

Detection of helminth ova genera using in-situ biosynthesis of gold nanoparticles

In this study, a presumptive colorimetric method was used to detect and differentiate the ova of two major soil transmitted helminths in wastewater, Ascaris and Trichuris. Gold nanoparticles were synthesised following the reduction of tetrachloroauric acid by the surface moiety of Ascaris suum, resulting in a colour change. In contrast there was no colour change with Trichuris suis indicating the absence of gold nanoparticle synthesis. Analysis of the ova using scanning electron microscopy (SEM) revealed that the synthesis of nanoparticles on the surface of ova was confirmed as gold nanoparticles (91 w/w %) by energy dispersive X-ray analysis (EDX). This study indicated that the surface moieties of helminth ova could be a potential target for ova detection and differentiation using the biosynthesis of nanoparticles by colorimetry methods.

Three advantages:

•

Simple colorimetry based method requiring no sophisticated devices.

•

No trained personnel required.

•

Cost-effective and can be a potential candidate for biosensors.

Photoluminescence measurements of carbon quantum dots within three-dimensional hydrogel matrices using a high throughput 96 well plate method

Solid or liquid platforms have been traditionally employed for measuring the fluorescent properties of quantum carbon dots (QCD). Hydrogels possess both liquid and solid properties which allow them to overcome several shortfalls of both solid and liquid sensing platforms. Hydrogels offer a three dimensional platform which can house nanoparticles with different attributes (i.e. fluorescent QCD's) and prevents their aggregation. Here, we incorporate QCD's (made from the hydrothermal treatment of 1-naphthylamine and citric acid) into the matrix of a zinc oxide hydrogel. This nanocomposite was shown to have hexavalent chromium (Cr⁶⁺) specific fluorescence quenching properties. Detailed fluorescence analysis of the hydrogel with Cr⁶⁺ was conducted in a high throughput manner by loading the hydrogel into wells of a black 96-well plate. Fluorescence quenching of the hydrogel-QCD-nanocomposites in the presence of dilutions of Cr⁶⁺ was measured using a fluorescence spectrophotometer and showed incremental fluorescence decreases with increasing Cr⁶⁺ concentration. Furthermore, this was quantitatively confirmed by Stern-Volmer plots showing a linear quenching trend (R² = 0.9975) when comparing fluorescence intensities against increasing Cr⁶⁺ concentrations (0.234-1.875 μM). This technology can be applied for routine water quality testing in agricultural, natural and potable water sources for the early detection of heavy metal pollutants.

Evaluation of plasmid DNA stability against ultrasonic shear stress and its in vitro delivery efficiency using ionic liquid [Bmim][PF6]

The hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate [Bmim][PF₆] forms nanostructures with negatively charged plasmid DNA through electrostatic interactions. The formation of plasmid DNA/IL nanostructures was confirmed by measuring the zeta potential of plasmid DNA as well as plasmid DNA/IL nanostructures. The zeta potential of the nanostructures was positive, although plasmid DNA is negatively charged. The positive zeta potential is due to the complexation between plasmid DNA and positively charged ionic liquid [Bmim][PF₆]. The ability of ionic liquid [Bmim][PF₆] to protect plasmid DNA against ultrasonic shear stress was also investigated using an agarose gel electrophoretic assay and showed that ionic liquid stabilizes plasmid DNA against ultrasonication. The plasmid DNA and plasmid DNA/IL nanostructures were subjected to ultrasonic shear stress for different time periods and the biological functionality of pristine plasmid DNA (i.e., expression of the eGFP gene) as well as the self-assembled nanostructures was investigated in vitro using three different cell lines, COS7, HEK293 and HeLa. Ionic liquid [Bmim][PF₆] protected the plasmid DNA against ultrasonic shear stress and also enhanced gene transfection efficiency in vitro. Furthermore, the cytotoxicity of ionic liquid [Bmim][PF₆] was assayed in vitro using all three cell lines and the toxicity was very low. Therefore, the ionic liquid [Bmim][PF₆] stabilizes plasmid DNA against ultrasonic shear stress and also enhances its in vitro delivery efficiency.

The hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate [Bmim][PF₆] forms ultrasonically stable and functional nanostructures with negatively charged plasmid DNA through electrostatic interactions.