1
|
Aggregation-Induced Emission of Naphthalene Diimides: Effect of Chain Length on Liquid and Solid-Phase Emissive Properties. Chem Asian J 2024; 19:e202400152. [PMID: 38528740 DOI: 10.1002/asia.202400152] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2024] [Revised: 03/22/2024] [Accepted: 03/25/2024] [Indexed: 03/27/2024]
Abstract
The aggregation-induced emission (AIE) properties of a systematic series of naphthalene diimides (NDIs) varying the chain length at the imide positions have been studied. A solvophobic collapse of NDI units through the flash injection of THF NDI solutions in sonicating water triggers the formation of stable suspensions with enhanced fluorescence emissions. Shorter chains favor the π-π stacking of NDI units through H-aggregation producing a strong AIE effect showing remarkably high quantum yields that have not been observed for non core-substitued NDIs previously. On the other hand, NDIs functionalized with longer chains lead to more disordered domains where π-π stacking between NDI units is mainly given by J-aggregation unfavoring the AIE effect.
Collapse
|
2
|
Enhancing the Conductivity and Thermoelectric Performance of Semicrystalline Conducting Polymers through Controlled Tie Chain Incorporation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2310480. [PMID: 38669281 DOI: 10.1002/adma.202310480] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Revised: 02/19/2024] [Indexed: 04/28/2024]
Abstract
Conjugated polymers are promising materials for thermoelectric applications, however, at present few effective and well-understood strategies exist to further advance their thermoelectric performance. Here a new model system is reported for a better understanding of the key factors governing their thermoelectric properties: aligned, ribbon-phase poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) doped by ion-exchange doping. Using a range of microstructural and spectroscopic methods, the effect of controlled incorporation of tie-chains between the crystalline domains is studied through blending of high and low molecular weight chains. The tie chains provide efficient transport pathways between crystalline domains and lead to significantly enhanced electrical conductivity of 4810 S cm-1, which is not accompanied by a reduction in Seebeck coefficient or a large increase in thermal conductivity. Respectable power factors of 173 µW m-1 K-2 are demonstrated in this model system. The approach is generally applicable to a wide range of semicrystalline conjugated polymers and could provide an effective pathway for further enhancing their thermoelectric properties and overcome traditional trade-offs in optimization of thermoelectric performance.
Collapse
|
3
|
Ordered Perovskite Structure with Functional Units for High Performance and Stable Solar Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024:e2401416. [PMID: 38571375 DOI: 10.1002/adma.202401416] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/26/2024] [Revised: 04/01/2024] [Indexed: 04/05/2024]
Abstract
Ion migration is one of the most critical challenges that affects the stability of metal-halide perovskite solar cells (PSCs). However, the current arsenal of available strategies for solving this issue is limited. Here, novel perovskite active layers following the concept of ordered structures with functional units (OSFU) to intrinsically suppress ion migration, in which a three-dimensional (3D) perovskite layer is deposited by vapor deposition for light absorption and a 2D layer is deposited by solution process for ion inhibition, are constructed. As a promising result, the activation energy of ion migration increases from 0.36 eV for the conventional perovskite to 0.54 eV for the OSFU perovskite. These devices exhibit substantially enhanced operational stability in comparison with the conventional ones, retaining >85% of their initial efficiencies after 1200 h under ISOS-L-1. Moreover, the OSFU devices show negligible fatigue behavior with a robust performance under light/dark cycling aging test (ISOS-LC-1 protocol), which demonstrates the promising application of functional motif theory in this field.
Collapse
|
4
|
A polymer library enables the rapid identification of a highly scalable and efficient donor material for organic solar cells. MATERIALS HORIZONS 2023; 10:4202-4212. [PMID: 37599602 DOI: 10.1039/d3mh00787a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/22/2023]
Abstract
The dramatic improvement of the PCE (power conversion efficiency) of organic photovoltaic devices in the past few years has been driven by the development of new polymer donor materials and non-fullerene acceptors (NFAs). In the design of such materials synthetic scalability is often not considered, and hence complicated synthetic protocols are typical for high-performing materials. Here we report an approach to readily introduce a variety of solubilizing groups into a benzo[c][1,2,5]thiadiazole acceptor comonomer. This allowed for the ready preparation of a library of eleven donor polymers of varying side chains and comonomers, which facilitated a rapid screening of properties and photovoltaic device performance. Donor FO6-T emerged as the optimal material, exhibiting good solubility in chlorinated and non-chlorinated solvents and achieving 15.4% PCE with L8BO as the acceptor (15.2% with Y6) and good device stability. FO6-T was readily prepared on the gram scale, and synthetic complexity (SC) analysis highlighted FO6-T as an attractive donor polymer for potential large scale applications.
Collapse
|
5
|
Incorporating Naphthalene and Halogen into Near-Infrared Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Low-Voltage Losses. ACS APPLIED MATERIALS & INTERFACES 2023; 15:44054-44061. [PMID: 37694683 DOI: 10.1021/acsami.3c09528] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/12/2023]
Abstract
The invention of near-infrared pedant-based double-cable conjugated polymers has demonstrated remarkable efficacy in single-component organic solar cells (SCOSCs). This work focuses on the innovative double-cable conjugated polymers aimed at attaining good absorption and suitable energy levels. Specifically, in the aromatic side units, the electron-donating (D) part is designed using a thieno[3,4-c]pyrrole-4,6-dione (TPD) as a core unit, flanked by two cyclopentadithiophene groups on either side. The electron-deficient (A) terminal groups consist of 2-(3-oxo-2,3-dihydro-1H-cyclopenta[b]naphthalen-1-ylidene) malononitrile (NC), which can be further modified through fluorination to modulate the physical properties and packing modes of the acceptor material. The resulting double-cable conjugated polymers exhibit broad absorption spectra spanning 500-850 nm and possess lowered Frontier energy levels when incorporating fluorine elements, providing decreased voltage losses in SCOSCs. Therefore, SCOSCs fabricated using these polymers have demonstrated power conversion efficiencies ranging from 7.6 to 10.2%, in which fluorine-containing double-cable conjugated polymers showed higher PCEs due to more favorable crystalline packing, enhanced exciton dissociation probability, and charge-transporting ability.
Collapse
|
6
|
p-Type Conjugated Polymers Containing Electron-Deficient Pentacyclic Azepinedione. Macromolecules 2023; 56:5825-5834. [PMID: 37576475 PMCID: PMC10413964 DOI: 10.1021/acs.macromol.3c00843] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2023] [Revised: 06/30/2023] [Indexed: 08/15/2023]
Abstract
Bisthienoazepinedione (BTA) has been reported for constructing high-performing p-type conjugated polymers in organic electronics, but the ring extended version of BTA is not well explored. In this work, we report a new synthesis of a key building block to the ring expanded electron-deficient pentacyclic azepinedione (BTTA). Three copolymers of BTAA with benzodithiophene substituted by different side chains are prepared. These polymers exhibit similar energy levels and optical absorption in solution and solid state, while significant differences are revealed in their film morphologies and behavior in transistor and photovoltaic devices. The best-performing polymers in transistor devices contained alkylthienyl side chains on the BDT unit (pBDT-BTTA-2 and pBDT-BTTA-3) and demonstrated maximum saturation hole mobilities of 0.027 and 0.017 cm2 V-1 s-1. Blends of these polymers with PC71BM exhibited a best photovoltaic efficiency of 6.78% for pBDT-BTTA-3-based devices. Changing to a low band gap non-fullerene acceptor (BTP-eC9) resulted in improved efficiency of up to 13.5%. Our results are among the best device performances for BTA and BTTA-based p-type polymers and highlight the versatile applications of this electron-deficient BTTA unit.
Collapse
|
7
|
Improving OFF-State Bias-Stress Stability in High-Mobility Conjugated Polymer Transistors with an Antisolvent Treatment. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2205377. [PMID: 36373490 DOI: 10.1002/adma.202205377] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/14/2022] [Revised: 10/10/2022] [Indexed: 06/16/2023]
Abstract
Conjugated polymer field-effect transistors are emerging as an enabling technology for flexible electronics due to their excellent mechanical properties combined with sufficiently high charge-carrier mobilities and compatibility with large-area, low-temperature processing. However, their electrical stability remains a concern. ON-state (accumulation mode) bias-stress instabilities in organic semiconductors have been widely studied, and multiple mitigation strategies have been suggested. In contrast, OFF-state (depletion mode) bias-stress instabilities remain poorly understood despite being crucial for many applications in which the transistors are held in their OFF-state for most of the time. Here, a simple method of using an antisolvent treatment is presented to achieve significant improvements in OFF-state bias-stress and environmental stability as well as general device performance for one of the best performing polymers, solution-processable indacenodithiophene-co-benzothiadiazole (IDT-BT). IDT-BT is weakly crystalline, and the notable improvements to an antisolvent-induced, increased degree of crystallinity, resulting in a lower probability of electron trapping and the removal of charge traps is attributed. The work highlights the importance of the microstructure in weakly crystalline polymer films and offers a simple processing strategy for achieving the reliability required for applications in flexible electronics.
Collapse
|
8
|
Tuning Dipole Orientation of 2,6-Azulene Units in Conjugated Copolymers by C–H Activation Strategy toward High-Performance Organic Semiconductor. ACS Macro Lett 2023; 12:487-493. [PMID: 37000948 DOI: 10.1021/acsmacrolett.3c00040] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/03/2023]
Abstract
Azulene has aroused widespread interest for constructing optoelectronic materials. However, controlling the dipole orientation of 2,6-azulene units in the conjugated polymer backbone is a significant challenge so far. Herein, by C-H activation strategy, three 2,6-azulene-TPD-based conjugated copolymers with different dipole arrangements were synthesized, where TPD = thieno[3,4-c]pyrrole-4,6-dione. The dipole arrangements of 2,6-azulene units were random for P(AzTPD-1), head-to-head/tail-to-tail for P(AzTPD-2), and head-to-tail for P(AzTPD-3). These polymers exhibited unipolar n-type semiconductor characteristics in organic field effect transistors. Moreover, regioregular polymer P(AzTPD-3) displayed the best device performance with an electron mobility of up to 0.33 cm2 V-1 s-1, which makes P(AzTPD-3) a high-performance n-type polymeric semiconductor. These results demonstrate that incorporation of 2,6-azulene units into the polymeric backbone together with the regulation of the dipole orientation of 2,6-azulene units is an effective strategy for obtaining high-performance organic optoelectronic materials.
Collapse
|
9
|
Third Crystalline Form of P(NDI2OD-T2) with Pronounced End-on Texture. ACS Macro Lett 2023; 12:140-146. [PMID: 36638049 DOI: 10.1021/acsmacrolett.2c00402] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023]
Abstract
We report the observation of a third crystalline polymorph, "form III", of the well-studied electron-transporting conjugated polymer P(NDI2OD-T2) that exhibits end-on texture. This third polymorph of P(NDI2OD-T2) is distinguished from other polymorphs by having two monomer units incorporated along the backbone-stacking direction, resulting in a doubling of the c axis of the unit cell. Form III crystallites are realized by melt-annealing a thin film followed by slow cooling. The distinct packing of this third polymorph is established through the application of grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements combined with peak simulation of candidate unit cells. The discovery of a third polymorph of P(NDI2OD-T2) provides a fresh opportunity for studying structure/function relationships of this important semiconducting polymer.
Collapse
|
10
|
Double-Cable Conjugated Polymers Based on Simple Non-Fused Electron Acceptors for Single-Component Organic Solar Cells. Macromolecules 2023. [DOI: 10.1021/acs.macromol.2c02184] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
|
11
|
Competing single-chain folding and multi-chain aggregation pathways control solution-phase aggregate morphology of organic semiconducting polymers. NANOSCALE 2022; 14:18070-18086. [PMID: 36448546 DOI: 10.1039/d2nr04750k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Understanding the solution-phase behaviour of organic semiconducting polymers is important for systematically improving the performance of devices based on solution-processed thin films of these molecules. Conventional polymer theory predicts that polymer conformations become more compact as solvent quality decreases, but recent experiments have shown the high-performance organic-semiconducting polymer P(NDI2OD-T2) to form extended rod-like aggregates much larger than a single chain in poor solvents, with the formation of these extended aggregates correlated with enhanced electron mobility in films deposited from these solutions. We explain the unexpected formation of extended aggregates using a novel coarse-grained simulation model of P(NDI2OD-T2) that we have developed to study the effect of solvent quality on its solution-phase behaviour. In poor solvents, we find that aggregation through only a few monomers gives effectively inseparable chains, leading to the formation of extended structures of partially overlapping chains via non-equilibrium assembly. This behaviour requires that multi-chain aggregation occurs faster than chain folding, which we show is the case for the chain lengths and concentrations shown experimentally to form rod-like aggregates. This kinetically controlled process introduces a dependence of aggregate structure on concentration, chain length, and chain flexibility, which we show is able to reconcile experimental findings and is generalisable to the solution-phase assembly of other semiflexible polymers.
Collapse
|
12
|
Organic Solar Cell With Efficiency Over 20% and V OC Exceeding 2.1 V Enabled by Tandem With All-Inorganic Perovskite and Thermal Annealing-Free Process. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2200445. [PMID: 35876031 PMCID: PMC9534952 DOI: 10.1002/advs.202200445] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2022] [Revised: 05/28/2022] [Indexed: 05/07/2023]
Abstract
Organic solar cells (OSCs) based on polymer donor and non-fullerene acceptor achieve power conversion efficiency (PCE) more than 19% but their poor absorption below 550 nm restricts the harvesting of high-energy photons. In contrast, wide bandgap all-inorganic perovskites limit the absorption of low-energy photons and cause serious below bandgap loss. Therefore, a 2-terminal (2T) monolithic perovskite/organic tandem solar cell (TSC) incorporating wide bandgap CsPbI2 Br is demonstrated as front cell absorber and organic PM6:Y6 blend as rear cell absorber, to extend the absorption of OSCs into high-energy photon region. The perovskite sub-cell, featuring a sol-gel prepared ZnO/SnO2 bilayer electron transporting layer, renders a high open-circuit voltage (VOC ). The VOC is further enhanced by employing thermal annealing (TA)-free process in the fabrication of rear sub-cell, demonstrating a record high VOC of 2.116 V. The TA-free Ag/PFN-Br interface in organic sub-cell facilitates charge transport and restrains nonradiative recombination. Consequently, a remarkable PCE of 20.6% is achieved in monolithic 2T-TSCs configuration, which is higher than that of both reported single junction and tandem OSCs, demonstrating that tandem with wide bandgap all-inorganic perovskite is a promising strategy to improve the efficiency of OSCs.
Collapse
|
13
|
Poly(2,6-azuleneethynylene)s: Design, Synthesis, and Property Studies. Macromolecules 2022. [DOI: 10.1021/acs.macromol.2c01101] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
14
|
Double-Cable Conjugated Polymers with Pendent Near-Infrared Electron Acceptors for Single-Component Organic Solar Cells. Angew Chem Int Ed Engl 2022; 61:e202209316. [PMID: 35785422 DOI: 10.1002/anie.202209316] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2022] [Indexed: 11/06/2022]
Abstract
Double-cable conjugated polymers with near-infrared (NIR) electron acceptors are synthesized for use in single-component organic solar cells (SCOSCs). Through the development of a judicious synthetic pathway, the highly sensitive nature of the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC)-based electron acceptors in basic and protonic solvents is overcome. In addition, an asymmetric design motif is adopted to optimize the packing of donor and acceptor segments, enhancing charge separation efficiency. As such, the new double-cable polymers are successfully applied in SCOSCs, providing an efficiency of over 10 % with a broad photo response from 300 to 850 nm and exhibiting excellent thermal/light stability. These results demonstrate the powerful design of NIR-acceptor-based double-cable polymers and will enable SCOSCs to enter a new stage.
Collapse
|
15
|
Correction to “High-Performance Unipolar n-Type Conjugated Polymers Enabled by Highly Electron-Deficient Building Blocks Containing F and CN Groups”. Macromolecules 2022. [DOI: 10.1021/acs.macromol.2c01353] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
16
|
Double‐Cable Conjugated Polymers with Pendent Near‐Infrared Electron Acceptors for Single‐Component Organic Solar Cells. Angew Chem Int Ed Engl 2022. [DOI: 10.1002/ange.202209316] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
|
17
|
Organogels from Diketopyrrolopyrrole Copolymer Ionene/Polythiophene Blends Exhibit Ground-State Single Electron Transfer in the Solid State. Macromolecules 2022. [DOI: 10.1021/acs.macromol.2c00655] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
18
|
Resolving the backbone tilt of crystalline poly(3-hexylthiophene) with resonant tender X-ray diffraction. MATERIALS HORIZONS 2022; 9:1649-1657. [PMID: 35421883 DOI: 10.1039/d2mh00244b] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The way in which conjugated polymers pack in the solid state strongly affects the performance of polymer-based optoelectronic devices. However, even for the most crystalline conjugated polymers the precise packing of chains within the unit cell is not well established. Here we show that by performing resonant X-ray diffraction experiments at the sulfur K-edge we are able to resolve the tilting of the planar backbones of crystalline poly(3-hexylthiophene) (P3HT) within the unit cell. This approach exploits the anisotropic nature of the X-ray optical properties of conjugated polymers, enabling us to discern between different proposed crystal structures. By comparing our data with simulations based on different orientations, a tilting of the planar conjugated backbone with respect to the side chain stacking direction of 30 ± 5° is determined.
Collapse
|
19
|
High-Performance Unipolar n-Type Conjugated Polymers Enabled by Highly Electron-Deficient Building Blocks Containing F and CN Groups. Macromolecules 2022. [DOI: 10.1021/acs.macromol.2c00870] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
20
|
Multi-Edge Resonant Tender X-ray Diffraction for Probing the Crystalline Packing of Conjugated Polymers. Macromolecules 2022. [DOI: 10.1021/acs.macromol.2c00484] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
21
|
Double-Cable Conjugated Polymers with Rigid Phenyl Linkers for Single-Component Organic Solar Cells. Macromolecules 2022. [DOI: 10.1021/acs.macromol.1c02593] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
22
|
Vinylene Flanked Naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole Polymer for Low-Crystallinity Ambipolar Transistors. Macromolecules 2021. [DOI: 10.1021/acs.macromol.1c02253] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
23
|
|
24
|
Revealing the Side‐Chain‐Dependent Ordering Transition of Highly Crystalline Double‐Cable Conjugated Polymers. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202111192] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
25
|
Revealing the Side-Chain-Dependent Ordering Transition of Highly Crystalline Double-Cable Conjugated Polymers. Angew Chem Int Ed Engl 2021; 60:25499-25507. [PMID: 34546627 DOI: 10.1002/anie.202111192] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2021] [Indexed: 11/06/2022]
Abstract
We developed a series of highly crystalline double-cable conjugated polymers for application in single-component organic solar cells (SCOSCs). These polymers contain conjugated backbones as electron donor and pendant perylene bisimide units (PBIs) as electron acceptor. PBIs are connected to the backbone via alkyl units varying from hexyl (C6 H12 ) to eicosyl (C20 H40 ) as flexible linkers. For double-cable polymers with short linkers, the PBIs tend to stack in a head-to-head fashion, resulting in large d-spacings (e.g. 64 Å for the polymer P12 with C12 H24 linker) along the lamellar stacking direction. When the length of the linker groups is longer than a certain length, the PBIs instead adopt a more ordered packing likely via H-aggregation, resulting in short d-spacings (e.g. 50 Å for the polymer P16 with C16 H32 linker). This work highlights the importance of linker length on the molecular packing of the acceptor units and the influences on the photovoltaic performance of SCOSCs.
Collapse
|
26
|
Anisotropic Resonant X-ray Diffraction of a Conjugated Polymer at the Sulfur K-Edge. J Phys Chem Lett 2021; 12:3762-3766. [PMID: 33844538 DOI: 10.1021/acs.jpclett.1c00532] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
The planar, aromatic nature of the backbone of conjugated polymers endows them with anisotropic properties. Here we show that the resonant X-ray diffraction of a sulfur-containing semicrystalline conjugated polymer at the sulfur K-edge is highly anisotropic, with strong modulation of diffracted intensity depending upon the relative orientation of the polarization of the incident beam with respect to the diffracting crystal planes. Through determination of the anisotropic resonant scattering factors, we can spectroscopically reproduce the observed resonant anisotropic scattering effects based on a proposed unit cell geometry for the polymer.
Collapse
|
27
|
Charge transport physics of a unique class of rigid-rod conjugated polymers with fused-ring conjugated units linked by double carbon-carbon bonds. SCIENCE ADVANCES 2021; 7:eabe5280. [PMID: 33910909 PMCID: PMC8081371 DOI: 10.1126/sciadv.abe5280] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/27/2020] [Accepted: 03/10/2021] [Indexed: 06/01/2023]
Abstract
We investigate the charge transport physics of a previously unidentified class of electron-deficient conjugated polymers that do not contain any single bonds linking monomer units along the backbone but only double-bond linkages. Such polymers would be expected to behave as rigid rods, but little is known about their actual chain conformations and electronic structure. Here, we present a detailed study of the structural and charge transport properties of a family of four such polymers. By adopting a copolymer design, we achieve high electron mobilities up to 0.5 cm2 V-1 s-1 Field-induced electron spin resonance measurements of charge dynamics provide evidence for relatively slow hopping over, however, long distances. Our work provides important insights into the factors that limit charge transport in this unique class of polymers and allows us to identify molecular design strategies for achieving even higher levels of performance.
Collapse
|
28
|
A NIST facility for resonant soft x-ray scattering measuring nano-scale soft matter structure at NSLS-II. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2021; 33:164001. [PMID: 33498032 DOI: 10.1088/1361-648x/abdffb] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2020] [Accepted: 01/26/2021] [Indexed: 06/12/2023]
Abstract
We present the design and performance of a polarized resonant soft x-ray scattering (RSoXS) station for soft matter characterization built by the national institute of standards and technology at the national synchrotron light source-II (NSLS-II). The RSoXS station is located within the spectroscopy soft and tender beamline suite at NSLS-II located in Brookhaven national laboratory, New York. Numerous elements of the RSoXS station were designed for optimal performance for measurements on soft matter systems, where it is of critical importance to minimize beam damage and maximize collection efficiency of polarized x-rays. These elements include a novel optical design, sample manipulator and sample environments, as well as detector setups. Finally, we will report the performance of the measurement station, including energy resolution, higher harmonic content and suppression methods, the extent and mitigation of the carbon absorption dip on optics, and the range of polarizations available from the elliptically polarized undulator source.
Collapse
|
29
|
Abstract
The extensive use of halomethanes (CH3X, X = F, Cl, Br, I) as refrigerants, propellants, and pesticides has drawn serious concern due to their adverse biological and atmospheric impact. However, there are currently no portable rapid and accurate monitoring systems for their detection. This work introduces an approach for the selective and sensitive detection of halomethanes using photoluminescence spectral shifts in cesium lead halide perovskite nanocrystals. Focusing on iodomethane (CH3I) as a model system, it is shown that cesium lead bromide (CsPbBr3) nanocrystals can undergo rapid (<5 s) halide exchange, but only after exposure to oleylamine to induce nucleophilic substitution of the CH3I and release the iodide species. The extent of the halide exchange is directly dependent on the CH3I concentration, with the photoluminescence emission of the CsPbBr3 nanocrystals exhibiting a redshift of more than 150 nm upon the addition of 10 ppmv of CH3I. This represents the widest detection range and the highest sensitivity to the detection of halomethanes using a low-cost and portable approach reported to date. Furthermore, inherent selectivity for halomethanes compared to other organohalide analogues is achieved through the dramatic differences in their alkylation reactivity.
Collapse
|
30
|
Resonant Tender X-ray Diffraction for Disclosing the Molecular Packing of Paracrystalline Conjugated Polymer Films. J Am Chem Soc 2021; 143:1409-1415. [DOI: 10.1021/jacs.0c10721] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
31
|
Acene Ring Size Optimization in Fused Lactam Polymers Enabling High n-Type Organic Thermoelectric Performance. J Am Chem Soc 2020; 143:260-268. [PMID: 33350307 DOI: 10.1021/jacs.0c10365] [Citation(s) in RCA: 38] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
Three n-type fused lactam semiconducting polymers were synthesized for thermoelectric and transistor applications via a cheap, highly atom-efficient, and nontoxic transition-metal free aldol polycondensation. Energy level analysis of the three polymers demonstrated that reducing the central acene core size from two anthracenes (A-A), to mixed naphthalene-anthracene (A-N), and two naphthalene cores (N-N) resulted in progressively larger electron affinities, thereby suggesting an increasingly more favorable and efficient solution doping process when employing 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI) as the dopant. Meanwhile, organic field effect transistor (OFET) mobility data showed the N-N and A-N polymers to feature the highest charge carrier mobilities, further highlighting the benefits of aryl core contraction to the electronic performance of the materials. Ultimately, the combination of these two factors resulted in N-N, A-N, and A-A to display power factors (PFs) of 3.2 μW m-1 K-2, 1.6 μW m-1 K-2, and 0.3 μW m-1 K-2, respectively, when doped with N-DMBI, whereby the PFs recorded for N-N and A-N are among the highest reported in the literature for n-type polymers. Importantly, the results reported in this study highlight that modulating the size of the central acene ring is a highly effective molecular design strategy to optimize the thermoelectric performance of conjugated polymers, thus also providing new insights into the molecular design guidelines for the next generation of high-performance n-type materials for thermoelectric applications.
Collapse
|
32
|
Resolving Different Physical Origins toward Crystallite Imperfection in Semiconducting Polymers: Crystallite Size vs Paracrystallinity. J Phys Chem B 2020; 124:10529-10538. [PMID: 33169995 DOI: 10.1021/acs.jpcb.0c06763] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The crystallization and aggregation behaviors of semiconducting polymers play a critical role in determining the ultimate performance of optoelectronic devices based on these materials. Due to the soft nature of polymers, crystallite imperfection exists ubiquitously. To this aspect, crystallinity is often used to represent the degree of crystallite imperfection in a reciprocal relation. Despite of the importance, the discussion on crystallinity is still on the phenomenological level and ambiguous in many cases. As two major contributors to crystallite imperfection, crystallite size and paracrystallinity are highly intertwined and hardly separated, hindering more accurate and trustworthy structural analysis. Herein, with the aid of synchrotron-based X-ray diffraction, combined with environmentally controlled heating capability, the evolution of crystallite size and paracrystallinity of two prototypical polythiophene-based thin films have been successfully measured. Strikingly, the paracrystallinity of poly(3-hexylthiophene-2,5-diyl) (P3HT) crystallites remains unchanged with annealing, while the paracrystallinity of poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) becomes diminished with crystallite growth. This work delivers a promising gesture to semiconducting polymers community, confirming that it is possible to experimentally separate crystallite size and paracrystallinity, both of which are highly intertwined. With this progress, investigation on the correlation between further detailed microstructural parameters and device performance can be achieved.
Collapse
|
33
|
Synthesis and Aggregation Behavior of a Glycolated Naphthalene Diimide Bithiophene Copolymer for Application in Low-Level n-Doped Organic Thermoelectrics. Macromolecules 2020. [DOI: 10.1021/acs.macromol.0c00657] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
34
|
High-Performance All-Polymer Solar Cells Enabled by n-Type Polymers with an Ultranarrow Bandgap Down to 1.28 eV. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2001476. [PMID: 32519429 DOI: 10.1002/adma.202001476] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/01/2020] [Revised: 04/23/2020] [Indexed: 06/11/2023]
Abstract
Compared to organic solar cells based on narrow-bandgap nonfullerene small-molecule acceptors, the performance of all-polymer solar cells (all-PSCs) lags much behind due to the lack of high-performance n-type polymers, which should have low-aligned frontier molecular orbital levels and narrow bandgap with broad and intense absorption extended to the near-infrared region. Herein, two novel polymer acceptors, DCNBT-TPC and DCNBT-TPIC, are synthesized with ultranarrow bandgaps (ultra-NBG) of 1.38 and 1.28 eV, respectively. When applied in transistors, both polymers show efficient charge transport with a highest electron mobility of 1.72 cm2 V-1 s-1 obtained for DCNBT-TPC. Blended with a polymer donor, PBDTTT-E-T, the resultant all-PSCs based on DCNBT-TPC and DCNBT-TPIC achieve remarkable power conversion efficiencies (PCEs) of 9.26% and 10.22% with short-circuit currents up to 19.44 and 22.52 mA cm-2 , respectively. This is the first example that a PCE of over 10% can be achieved using ultra-NBG polymer acceptors with a photoresponse reaching 950 nm in all-PSCs. These results demonstrate that ultra-NBG polymer acceptors, in line with nonfullerene small-molecule acceptors, are also available as a highly promising class of electron acceptors for maximizing device performance in all-PSCs.
Collapse
|
35
|
Crucial Role of Fluorine in Fully Alkylated Ladder-Type Carbazole-Based Nonfullerene Organic Solar Cells. ACS APPLIED MATERIALS & INTERFACES 2020; 12:9555-9562. [PMID: 31999092 DOI: 10.1021/acsami.0c00981] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Two fused ladder-type nonfullerene acceptors, DTCCIC and DTCCIC-4F, based on an electron-donating alkylated dithienocyclopentacarbazole core flanked by electron-withdrawing nonfluorinated or fluorinated 1,1-dicyanomethylene-3-indanone (IC or IC-4F), are prepared and utilized in organic solar cells (OSCs). The two new molecules reveal planar structures and strong aggregation behavior, and fluorination is shown to red-shift the optical band gap and downshift energy levels. OSCs based on DTCCIC-4F exhibit a power conversion efficiency of 12.6%, much higher than that of DTCCIC-based devices (6.2%). Microstructural studies reveal that while both acceptors are highly crystalline, bulk heterojunction blends based on the nonfluorinated DTCCIC result in overly coarse domains, while blends based on the fluorinated DTCCIC-4F exhibit a more optimal nanoscale morphology. These results highlight the importance of end group fluorination in controlling molecular aggregation and miscibility.
Collapse
|
36
|
Alkali Cation Doping for Improving the Structural Stability of 2D Perovskite in 3D/2D PSCs. NANO LETTERS 2020; 20:1240-1251. [PMID: 31960676 DOI: 10.1021/acs.nanolett.9b04661] [Citation(s) in RCA: 25] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
3D/2D hybrid perovskite systems have been intensively investigated to improve the stability of perovskite solar cells (PSCs), whereas undesired crystallization of 2D perovskite during the film formation process could undermine the structural stability of 2D perovskite materials, which causes serious hysteresis of PSCs after aging. This issue is, however, rarely studied. The stability study for 3D/2D hybrid systems to date is all under the one-direction scan, and the lack of detailed information on the hysteresis after aging compromises the credibility of the stability results. In this work, by correlating the hysteresis of the hybrid PSCs with the 2D crystal structure, we find that the prompt 2D perovskite formation process easily induces numerous crystal imperfections and structural defects. These defects are susceptible to humidity attack and decompose the 2D perovskite to insulating long-chain cations and 3D perovskite, which hinder charge transfer or generate charge accumulation. Therefore, a large hysteresis is exhibited after aging the 3D/2D hybrid PSCs in an ambient environment, even though the reverse-scan power conversion efficiency (PCE) is found to be well-preserved. To address this issue, alkali cations, K+ and Rb+, are introduced into the 2D perovskite to exquisitely modulate the crystal formation, which gives rise to a higher crystallinity of 2D perovskite and a better film morphology with fewer defects. We achieved PCE beyond 21% due to the preferable charge transfer process and reduced nonradiative recombination losses. The structural features also bring about impressive moisture stability, which results in the corresponding PSCs retaining 93% of its initial PCE and negligible hysteresis after aging in an ambient atmosphere for 1200 h.
Collapse
|
37
|
Role of Molecular and Interchain Ordering in the Formation of a δ-Hole-Transporting Layer in Organic Solar Cells. ACS APPLIED MATERIALS & INTERFACES 2020; 12:3806-3814. [PMID: 31840485 DOI: 10.1021/acsami.9b17341] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Interface engineering, especially the realization of Ohmic contacts at the interface between organic semiconductors and metal contacts, is one of the essential preconditions to achieve high-efficiency organic electronic devices. Here, the interface structures of polymer/fullerene blends are correlated with the charge extraction/injection properties of working organic solar cells. The model system-poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM)-is fabricated using two different degrees of P3HT regioregularity to alter the blend interchain order and molecular packing, resulting in different device performances. Investigations by electroabsorption spectroscopy on these devices indicate a significant reduction (≈1 V) in the built-in potential with an increase in the P3HT regioregularity. This observation is also supported by a change in the work function (WF) of high regioregular polymer blends from photoelectron spectroscopy measurements. These results confirm the presence of a strong dipole layer acting as a δ-hole-transporting layer at the polymer/MoO3/Ag electrode interface. Unipolar hole-only devices show an increase in the magnitude of the hole current in high regioregular P3HT devices, suggesting an increase in the hole injection/extraction efficiency inside the device with a δ-hole-transporting layer. Microscopically, near-edge X-ray absorption fine structure spectroscopy was conducted to probe the surface microstructure in these blends, finding a highly edge-on orientation of P3HT chains in blends made with high regioregular P3HT. This edge-on orientation of P3HT chains at the interface results in a layer of oriented alkyl side chains capping the surface, which favors the formation of a dipole layer at the polymer/MoO3 interface. The increase in the charge extraction efficiency due to the formation of a δ-hole-transporting layer thus results in higher short circuit currents and fill factor values, eventually increasing the device efficiency in high regioregular P3HT devices despite a slight decrease in cell open circuit voltage. These findings emphasize the significance of WF control as a tool for improved device performance and pave the way toward interfacial optimization based on the modulation of fundamental polymer properties, such as polymer regioregularity.
Collapse
|
38
|
Titelbild: Selenium‐Substituted Diketopyrrolopyrrole Polymer for High‐Performance p‐Type Organic Thermoelectric Materials (Angew. Chem. 52/2019). Angew Chem Int Ed Engl 2019. [DOI: 10.1002/ange.201914205] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
39
|
Cover Picture: Selenium‐Substituted Diketopyrrolopyrrole Polymer for High‐Performance p‐Type Organic Thermoelectric Materials (Angew. Chem. Int. Ed. 52/2019). Angew Chem Int Ed Engl 2019. [DOI: 10.1002/anie.201914205] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
40
|
Selenium‐Substituted Diketopyrrolopyrrole Polymer for High‐Performance p‐Type Organic Thermoelectric Materials. Angew Chem Int Ed Engl 2019. [DOI: 10.1002/ange.201911058] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
41
|
Selenium-Substituted Diketopyrrolopyrrole Polymer for High-Performance p-Type Organic Thermoelectric Materials. Angew Chem Int Ed Engl 2019; 58:18994-18999. [PMID: 31605503 DOI: 10.1002/anie.201911058] [Citation(s) in RCA: 52] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2019] [Revised: 10/10/2019] [Indexed: 11/11/2022]
Abstract
Development of high-performance organic thermoelectric (TE) materials is of vital importance for flexible power generation and solid-cooling applications. Demonstrated here is the significant enhancement in TE performance of selenium-substituted diketopyrrolopyrrole (DPP) derivatives. Along with strong intermolecular interactions and high Hall mobilities of 1.0-2.3 cm2 V-1 s-1 in doping-states for polymers, PDPPSe-12 exhibits a maximum power factor and ZT of up to 364 μW m-1 K-2 and 0.25, respectively. The performance is more than twice that of the sulfur-based DPP derivative and represents the highest value for p-type organic thermoelectric materials based on high-mobility polymers. These results reveal that selenium substitution can serve as a powerful strategy towards rationally designed thermoelectric polymers with state-of-the-art performances.
Collapse
|
42
|
A Family of Heterocyclic Naphthalene Diimide (NDI) Analogues: Comparing Parent Isoquinoline Diimides and Phthalazine Diimides with NDI. Chempluschem 2019; 84:1638-1642. [DOI: 10.1002/cplu.201900596] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/08/2019] [Revised: 10/17/2019] [Indexed: 02/03/2023]
|
43
|
Oriented Attachment as the Mechanism for Microstructure Evolution in Chloride-Derived Hybrid Perovskite Thin Films. ACS APPLIED MATERIALS & INTERFACES 2019; 11:39930-39939. [PMID: 31532193 DOI: 10.1021/acsami.9b13259] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Hybrid organic-inorganic perovskites with appealing optoelectronic properties have attracted significant interest for photovoltaic application. The use of chloride (Cl-)-containing species to induce improved perovskite thin-film microstructures and improved optoelectronic properties is well-established. However, the mechanism for the formation of perovskite films with highly textured, micron-sized grains in the presence of Cl- is not well established. Using synchrotron-based in situ two-dimensional grazing incidence wide-angle X-ray scattering complemented by scanning electron microscopy imaging, we present an oriented attachment mechanism via mineral bridge formation for the microstructural evolution of perovskite films post-treated with methylammonium chloride. We have identified the crucial role of the chlorine-containing intermediate phase as the mineral bridge, which enables the reorientation of primary, nanoscale perovskite grains followed by fusion into uniaxial oriented quasi-single crystal grains. The resulting perovskite films exhibit micron-sized grains with preferential orientation of the tetragonal (110) direction perpendicular to the substrate, resulting in improved solar cell efficiency attributed to improved charge collection. Our findings help to understand the fundamental mechanisms of microstructure evolution via soft processing in hybrid perovskite films.
Collapse
|
44
|
Incorporation of γ-butyrolactone (GBL) dramatically lowers the phase transition temperature of formamidinium-based metal halide perovskites. Chem Commun (Camb) 2019; 55:11743-11746. [PMID: 31513197 DOI: 10.1039/c9cc05753f] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
We demonstrate that the δ to α phase transition temperature of formamidinium-based perovskites is reduced by ∼50 °C through the incorporation of ∼2 wt% γ-butyrolactone (GBL) into the crystal lattice. The intercalation of GBL is found to expand the unit cell of the δ-phase, reducing the energy barrier for thermal conversion.
Collapse
|
45
|
Effect of Backbone Sequence of a Naphthalene Diimide-Based Copolymer on Performance in n-Type Organic Thin-Film Transistors. ACS APPLIED MATERIALS & INTERFACES 2019; 11:35185-35192. [PMID: 31452373 DOI: 10.1021/acsami.9b09607] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
We report two newly synthesized naphthalene diimide (NDI)-based conjugated polymers, poly[(E)-2,7-bis(2-decyltetradecyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone-vinylene-thiophene-vinylene] (PNDI-VTV) and poly[(E)-2,7-bis(2-decyltetradecyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone-vinylene-selenophene-vinylene] (PNDI-VSV) with different donor units as electron-transporting organic semiconductors for organic field-effect transistors (OFETs). Furthermore, we study the effect of vinylene position on electron transport in the NDI polymers by using two similar polymers but with thiophene-vinylene-thiophene (PNDI-TVT) instead of vinylene-thiophene-vinylene or selenophene-vinylene-selenophene (PNDI-SVS) instead of vinylene-selenophene-vinylene. By incorporating vinylene between thiophene (or selenophene) units, the resulting NDI-based polymers PNDI-VTV and PNDI-VSV show larger backbone planarity than PNDI-TVT and PNDI-SVS. The polymers with a shorter acceptor monomer unit (PNDI-VTV and PNDI-VSV) show a strong face-on orientation, whereas those with a longer monomer unit (PNDI-TVT and SVS) exhibit a mixed face-on and edge-on orientation by two-dimensional grazing incidence X-ray diffraction. Optimized PNDI-VTV and PNDI-VSV OFETs exhibit electron mobilities of 0.043 and 0.7 cm2/(V·s), which is quite lower than those of PNDI-TVT and PNDI-SVS. In addition, the activation energies for electron transport of PNDI-VTV and PNDI-VSV were larger than those of PNDI-TVT and PNDI-SVS. Overall, this research provides the insight that the molecular alignment on the substrate can be controlled by the sequence of rigid acceptor monomer molecules for improving the electron transport of NDI polymers.
Collapse
|
46
|
Microstructural control suppresses thermal activation of electron transport at room temperature in polymer transistors. Nat Commun 2019; 10:3365. [PMID: 31358747 PMCID: PMC6662673 DOI: 10.1038/s41467-019-11125-9] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/10/2019] [Accepted: 06/24/2019] [Indexed: 11/10/2022] Open
Abstract
Recent demonstrations of inverted thermal activation of charge mobility in polymer field-effect transistors have excited the interest in transport regimes not limited by thermal barriers. However, rationalization of the limiting factors to access such regimes is still lacking. An improved understanding in this area is critical for development of new materials, establishing processing guidelines, and broadening of the range of applications. Here we show that precise processing of a diketopyrrolopyrrole-tetrafluorobenzene-based electron transporting copolymer results in single crystal-like and voltage-independent mobility with vanishing activation energy above 280 K. Key factors are uniaxial chain alignment and thermal annealing at temperatures within the melting endotherm of films. Experimental and computational evidences converge toward a picture of electrons being delocalized within crystalline domains of increased size. Residual energy barriers introduced by disordered regions are bypassed in the direction of molecular alignment by a more efficient interconnection of the ordered domains following the annealing process. Though solution-processed conjugated polymers with inverted temperature activated transport have been reported, the origin of this behaviour is unclear. Here, the authors realize temperature-independent electron transport above 280 K in a donor-acceptor copolymer through microstructural engineering.
Collapse
|
47
|
Detecting the Onset of Molecular Reorganization in Conjugated Polymer Thin Films Using an Easily Accessible Optical Method. Macromolecules 2019. [DOI: 10.1021/acs.macromol.9b00606] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
48
|
From Homochiral Assembly to Heterochiral Assembly: A Leap in Charge Transport Properties of Binaphthol-Based Axially Chiral Materials. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:6188-6195. [PMID: 30977665 DOI: 10.1021/acs.langmuir.9b00463] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Chirality, as a fundamental symmetry property, plays an important role in molecular assembly in the solid state, impacting upon the properties and performance of organic materials. Here, heterochiral assembly was observed upon a binaphthol-based axially chiral material in the thin film state, where the heterochiral assemblies of racemic mixtures exhibit superior crystallization behavior and film morphologies than their homochiral counterparts. Additionally, a dramatic increase (nearly 2 orders of magnitudes) in electronic mobility was obtained upon switching the active layers of organic thin-film transistors from homochiral assemblies to heterochiral assemblies. This work not only gives insights into the structure-aggregation property relationships of axially chiral self-assemblies but also offers new opportunities for novel organic soft materials.
Collapse
|
49
|
Understanding the effect of thionation on naphthalene diimide using first-principles predictions of near-edge x-ray absorption fine structure spectra. J Chem Phys 2019; 150:104302. [DOI: 10.1063/1.5084754] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023] Open
|
50
|
Negative Correlation between Intermolecular vs Intramolecular Disorder in Bulk-Heterojunction Organic Solar Cells. ACS APPLIED MATERIALS & INTERFACES 2018; 10:44576-44582. [PMID: 30488688 DOI: 10.1021/acsami.8b14628] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
By varying the concentration of a solvent additive, we demonstrate the modulation of intermolecular (donor/acceptor (D/A) interface) and intramolecular (bulk) disorder in blends of the low-band gap polymer poly[2,6-(4,4-bis(2-ethylhexyl)-4 H-cyclopental[2,1- b;3,4- b']-dithiophene)- alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM). Using the solvent additive concentration of 1,8-diiodooctane (DIO) in the host-processing solvent, the disorder in the bulk and at the interface is studied in terms of Urbach energy, electroluminescence (EL) broadening, and EL quantum efficiency (ELQE). The Urbach energy varies from 80 to 39 meV for bulk and 39 to 51 meV for D/A interface. An interesting feature is that changes in the Urbach energy of the D/A interface are opposite to those of the Urbach energy of bulk; i.e., the disorder at the D/A interface increases as the disorder in the bulk decreases with increase in DIO concentration. Our study evidently suggested a negative correlation between intermolecular and intramolecular property in a bulk-heterojunction solar cell. Furthermore, scanning photocurrent microscopy measurements show that the effective hole transport length is double in magnitude for cells processed from 3 vol % DIO in comparison to that in cells processed from 0 vol %. This increase in effective hole transport length is explained by an increase in the delocalization of the electronic states involved in charge transport, as confirmed by dark J- V knee voltage, JSC and EU-bulk measurements. Henceforth, we provide a functional relationship between the additive-induced bulk-heterojunction morphology and the optoelectronic properties of PCPDTBT-based solar cells.
Collapse
|