1,1'-Bis-(diphenylphosphino)ferrocene appended d8- and d10-configuration based thiosquarates: the molecular and electronic configurational insights into their sensitization and co-sensitization properties for dye sensitized solar cells

Three new d8- and d10-configuration based 1,1'-bis-(diphenylphosphino)ferrocene (dppf) appended thiosquarates complexes with general composition [M(mtsq)2dppf] (M = Ni2+ (NiL2); Zn2+ (ZnL2) and Cd2+ (CdL2)) (mtsq = 3-ethoxycyclobutenedione-4-thiolate) have been synthesized and characterized spectroscopically as well as in case of NiL2 by single crystal X-ray diffraction technique. The single crystal X-ray analysis reveals square planar geometry around Ni(II) in NiL2, where Ni(II) coordinates with two sulfur centres of two mtsq ligands in monodentate fashion and two phosphorus of a dppf ligand in chelating mode. The supramolecular architecture of NiL2 is sustained by intermolecular C-H⋯O interactions to form one-dimensional chain. Further, the application of these newly synthesized complexes as sensitizers and co-sensitizers/co-absorbents with ruthenium based N719 sensitizer in dye-sensitized solar cells (DSSCs) have been explored. The DSSC set-up based on NiL2 offers best photovoltaic performance with photovoltaic efficiency (η) 5.12%, short-circuit current (Jsc) 11.60 mA cm-2, open circuit potential (Voc) 0.690 V and incident photon to current conversion efficiency (IPCE) 63%. In co-sensitized DSSC set-up, ZnL2 along with state-of-the-art N719 dye displays best photovoltaic performance with η 6.65%, Jsc 14.47 mA cm-2, Voc 0.729 V and IPCE 69%, thereby showing an improvement by 15.25% in photovoltaic efficiency in comparison to the photovoltaic efficiency of N719 sensitized DSSC set-up. Variation in co-sensitization behaviour have been ascribed to the differences in the excited state energy level of co-sensitizers. The ZnL2 and CdL2 have a higher energy level position than N719 dye, allowing efficient electron transfer to N719 during light irradiation, while excited state of NiL2 is lower than N719 dye, preventing photoexcited electron transfer to N719, resulting in its lowest overall efficiency among the three co-sensitized DSSC setups.

Aerosol source apportionment uncertainty linked to the choice of input chemical components

For a Positive Matrix Factorization (PMF) aerosol source apportionment (SA) studies there is no standard procedure to select the most appropriate chemical components to be included in the input dataset for a given site typology, nor specific recommendations in this direction. However, these choices are crucial for the final SA outputs not only in terms of number of sources identified but also, and consequently, in the source contributions estimates. In fact, PMF tends to reproduce most of PM mass measured independently and introduced as a total variable in the input data, regardless of the percentage of PM mass which has been chemically characterized, so that the lack of some specific source tracers (e.g. levoglucosan) can potentially affect the results of the whole source apportionment study. The present study elaborates further on the same concept, evaluating quantitatively the impact of lacking specific sources' tracers on the whole source apportionment, both in terms of identified sources and source contributions. This work aims to provide first recommendations on the most suitable and critical components to be included in PMF analyses in order to reduce PMF output uncertainty as much as possible, and better represent the most commons PM sources observed in many sites in Western countries. To this aim, we performed three sensitivity analyses on three different datasets across EU, including extended sets of organic tracers, in order to cover different types of urban conditions (Mediterranean, Continental, and Alpine), source types, and PM fractions. Our findings reveal that the vehicle exhaust source resulted to be less sensitive to the choice of analytes, although source contributions estimates can deviate significantly up to 44 %. On the other hand, for the detection of the non-exhaust one is clearly necessary to analyze specific inorganic elements. The choice of not analysing non-polar organics likely causes the loss of separation of exhaust and non-exhaust factors, thus obtaining a unique road traffic source, which provokes a significant bias of total contribution. Levoglucosan was, in most cases, crucial to identify biomass burning contributions in Milan and in Barcelona, in spite of the presence of PAHs in Barcelona, while for the case of Grenoble, even discarding levoglucosan, the presence of PAHs allowed identifying the BB factor. Modifying the rest of analytes provoke a systematic underestimation of biomass burning source contributions. SIA factors resulted to be generally overestimated with respect to the base case analysis, also in the case that ions were not included in the PMF analysis. Trace elements were crucial to identify shipping emissions (V and Ni) and industrial sources (Pb, Ni, Br, Zn, Mn, Cd and As). When changing the rest of input variables, the uncertainty was narrow for shipping but large for industrial processes. Major and trace elements were also crucial to identify the mineral/soil factor at all cities. Biogenic SOA and Anthropogenic SOA factors were sensitive to the presence of their molecular tracers, since the availability of OC alone is unable to separate a SOA factor. Arabitol and sorbitol were crucial to detecting fungal spores while odd number of higher alkanes (C27 to C31) for plant debris.

New 5,5-(1,4-Phenylenebis(methyleneoxy)diisophthalic Acid Appended Zn(II) and Cd(II) MOFs as Potent Photocatalysts for Nitrophenols

Metal-organic frameworks (MOFs) are peculiar multimodal materials that find photocatalytic applications for the decomposition of lethal molecules present in the wastewater. In this investigation, two new d10-configuration-based MOFs, [Zn2(L)(H2O)(bbi)] (1) and [Cd2(L)(bbi)] (2) (5,5-(1,4-phenylenebis(methyleneoxy)diisophthalic acid (H2L) and 1,1'-(1,4-butanediyl)bis(imidazole) (bbi)), have been synthesized and characterized. The MOF 1 displayed a (4,6)-connected (3.43.52)(32.44.52.66.7) network topology, while 2 had a (3,10)-connected network with a Schläfli symbol of (410.511.622.72)(43)2. These MOFs have been employed as photocatalysts to photodegrade nitrophenolic compounds, especially p-nitrophenol (PNP). The photocatalysis studies reveal that 1 displayed relatively better photocatalytic performance than 2. Further, the photocatalytic efficacy of 1 has been assessed by altering the initial PNP concentration and photocatalyst dosage, which suggest that at 80 ppm PNP concentration and at its 50 mg concentration the MOF 1 can photo-decompose around 90.01% of PNP in 50 min. Further, radical scavenging experiments reveal that holes present over 1 and ·OH radicals collectively catalyze the photodecomposition of PNP. In addition, utilizing density of states (DOS) calculations and Hirshfeld surface analyses, a plausible photocatalysis mechanism for nitrophenol degradation has been postulated.

Copper(ii) and cobalt(iii) Schiff base complexes with hydroxy anchors as sensitizers in dye-sensitized solar cells (DSSCs)

Two Schiff base complexes of copper(ii) and cobalt(iii) having the formulae [CuL₂] (Cu-Sal) and [CoL₃] (Co-Sal) (HL = 2-(((2-hydroxyethyl)imino)methyl)phenol) have been synthesized and characterized microanalytically, spectroscopically and in the case of Cu-Sal using single crystal X-ray diffraction technique. The single crystal X-ray analysis reveals a square planar geometry around Cu(ii) satisfied by phenoxide oxygen and imine nitrogen of the L^- ligand to generate a six membered chelate ring. The solid state structure of Cu-Sal is satisfied by varied intermolecular non-covalent interactions. The nature of these interactions has been addressed with the aid of Hirshfeld surface analysis. Both compounds have been used as sensitizers in TiO₂ based dye sensitized solar cells (DSSCs) and the DSSC experiments revealed that Co-Sal offers better photovoltaic performance in comparison to Cu-Sal. The Co-Sal exhibited a J _sc of 9.75 mA cm^-2 with a V _oc of -0.648 V, incident photon to current conversion efficiency (IPCE) of 57% and η of 3.84%. The relatively better photovoltaic performance of Co-Sal could be attributed to better light absorption and dye loading than that of Cu-Sal.

New Heteroleptic 1,2-Bis(diphenylphosphino)ethane Appended Cobalt(III) Ferrocene Dithiocarbamates as Sensitizers in Dye Sensitizer Solar Cells (DSSCs)

Three new heteroleptic 1,2-bis(diphenylphosphino)ethane (dppe) appended Co(III) ferrocene dithiocarbamate complexes with formula [Co(dppe)(Fcdtc)]PF6 ((Fcdtc = N-benzyl-N-methylferrocene dithiocarbamate (Co-FcBz), N-2-methylpyridyl-N-methylferrocene dithiocarbamate (Co-FcPy) and N-ethanol-N-methylferrocene dithiocarbamate (Co-FcEtOH); dppe = 1,2-Bis(diphenylphosphino)ethane) have been...

A double co-sensitization strategy using heteroleptic transition metal ferrocenyl dithiocarbamate phenanthrolene-dione for enhancing the performance of N719-based DSSCs

Three new heteroleptic dithiocarbamate complexes with formula [M(Phen-dione)(Fcdtc)]PF₆ (where M = Ni(ii) Ni-Fc, Cu(ii) Cu-Fc) and [Co(Phen-dione)(Fcdtc)₂]PF₆ (Co-Fc) (Fcdtc = N-ethanol-N-methylferrocene dithiocarbamate and Phen-dione = 1,10-phenanthroline-5,6-dione; PF₆ ^- = hexafluorophosphate) were synthesized and characterized using microanalysis, FTIR, electronic absorption spectroscopy and mass spectrometry. The solution state electronic absorption spectroscopy for all three complexes displayed a band at ∼430 nm corresponding to the ferrocene unit and another low-intensity band in the visible region arising because of the d-d transitions. These newly synthesized complexes were used as co-sensitizers for the state-of-the-art di-tetrabutylammonium cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)ruthenium(ii) (N719) dye in dye-sensitized solar cells (DSSCs). Among the three co-sensitizers/co-adsorbent-based DSSC set-ups, the assembly fabricated using Co-Fc/N719 displayed good photovoltaic performance with 5.31% efficiency (η) while a new triple component strategy inculcating N719, Co-Fc and Cu-Fc dyes offered the best photovoltaic performance with 6.05% efficiency (η) with incident photon to current conversion efficiency (IPCE) of 63%. This indicated an upliftment of the DSSC performance by ∼38% in comparison to the set-up constructed by employing only N719 dye (η = 4.39%) under similar experimental conditions.

New di-n-butyltin(iv)-bis-(1-alkoxy-isoquinoline-4-nitrile thiolate): crystallographic and computational studies

Alcohol and n-Bu2Sn2+ assisted cyclization of dithiolate yielded two unexpected organotin(iv) products, their reaction mechanism and nature of weak interactions assessed.

Recent advances on bimetallic metal-organic frameworks (BMOFs): Syntheses, applications and challenges

Bimetallic metal-organic frameworks (MOFs) possess two different metal ions as nodes in their molecular frameworks. They are prepared by either using one-pot syntheses wherein different metals are mixed with suitable...

Efficient photodegradation of dyes by a new 3D Cd(II) MOF with rare fsh topology

Metal–organic frameworks (MOFs) can be regarded as 3D coordination polymers that adopt ordered porous structures and possess abundant active sites, which make them promising photocatalysts for the degradation of organic...

3,8-connected Cd(II)-based metal-organic framework as an apt luminescent sensor for antibiotic sulfasalazine

The incremental use of antibiotics by our society is now another reason of aquatic pollution as these antibiotics are now existing in the wastewater discharge. Therefore, it is necessary to...

One-year measurements of secondary organic aerosol (SOA) markers in the Paris region (France): Concentrations, gas/particle partitioning and SOA source apportionment

Twenty-five biogenic and anthropogenic secondary organic aerosol (SOA) markers have been measured over a one-year period in both gaseous and PM₁₀ phases in the Paris region (France). Seasonal and chemical patterns were similar to those previously observed in Europe, but significantly different from the ones observed in America and Asia due to dissimilarities in source precursor emissions. Nitroaromatic compounds showed higher concentrations in winter due to larger emissions of their precursors originating from biomass combustion used for residential heating purposes. Among the biogenic markers, only isoprene SOA marker concentrations increased in summer while pinene SOA markers did not display any clear seasonal trend. The measured SOA markers, usually considered as semi-volatiles, were mainly associated to the particulate phase, except for the nitrophenols and nitroguaiacols, and their gas/particle partitioning (GPP) showed a low temperature and OM concentrations dependency. An evaluation of their GPP with thermodynamic model predictions suggested that apart from equilibrium partitioning between organic phase and air, the GPP of the markers is affected by processes suppressing volatility from a mixed organic and inorganic phase, such as enhanced dissolution in aerosol aqueous phase and non-equilibrium conditions. SOA marker concentrations were used to apportion secondary organic carbon (SOC) sources applying both, an improved version of the SOA-tracer method and positive matrix factorization (PMF) Total SOC estimations agreed very well between both models, except in summer and during a highly processed Springtime PM pollution event in which systematic underestimation by the SOA tracer method was evidenced. As a first approach, the SOA-tracer method could provide a reliable estimation of the average SOC concentrations, but it is limited due to the lack of markers for aged SOA together with missing SOA/SOC conversion fractions for several sources.

Comparison of five methodologies to apportion organic aerosol sources during a PM pollution event

This study presents a comparison of five methodologies to apportion primary (POA) and secondary organic aerosol (SOA) sources from measurements performed in the Paris region (France) during a highly processed PM pollution event. POA fractions, estimated from EC-tracer method and positive matrix factorization (PMF) analyses, conducted on measurements from PM₁₀ filters, aerosol chemical speciation monitor (ACSM) and offline aerosol mass spectrometry (AMS), were all comparable (2.2-3.7 μg m^-3 as primary organic carbon (POC)). Associated relative uncertainties (measurement + model) on POC estimations ranged from 8 to 50%. The best apportionment of primary traffic OA was achieved using key markers (EC and 1-nitropyrene) in the chemical speciation-based PMF showing more pronounced rush-hour peaks and greater correlation with NO_x than other traffic related POC factors. All biomass burning-related factors were in good agreement, with a typical diel profile and a night-time increase linked to residential heating. If PMF applied to ACSM data showed good agreement with other PMF outputs corrected from dust-related factors (coarse PM), discrepancies were observed between individual POA factors (traffic, biomass burning) and directly comparable SOA factors and highly oxidized OA. Similar secondary organic carbon (SOC) concentrations (3.3 ± 0.1 μg m^-3) were obtained from all approaches, except the SOA-tracer method (1.8 μg m^-3). Associated uncertainties ranged from 14 to 52% with larger uncertainties obtained for PMF-chemical data, EC- and SOA-tracer methods. This latter significantly underestimated total SOA loadings, even including biomass burning SOA, due to missing SOA classes and precursors. None of the approaches was able to identify the formation mechanisms and/or precursors responsible for the highly oxidized SOA fraction associated with nitrate- and/or sulfate-rich aerosols (35% of OA). We recommend the use of a combination of different methodologies to apportion the POC/SOC concentrations/contributions to get the highest level of confidence in the estimates obtained.

Probiotic characterization of bacterial strains from fermented South Indian tomato pickle and country chicken intestine having antioxidative and antiproliferative activities

AIM

The present study aims to evaluate the potential antioxidant and antiproliferative properties of probiotic bacterial isolates Weissella cibaria p3B, Bacillus subtilis CS, and Bacillus tequilensis CL, isolated from South Indian fermented tomato pickle (homemade) and gut content of indigenous country chicken.

METHODS AND RESULTS

The bacterial isolates exhibited antimicrobial activity against food-borne, human pathogenic bacteria, along with better survival under different bile and acidic conditions, hydrophobicity towards several hydrocarbons, and adherence to intestinal epithelial cells (INT-407 cells). Also, the intact cell (IC) mixture of the three species showed better DPPH, ABTS, and Fe²⁺ chelating activity as compared to the individual IC or cell extract (CE) activity. Among the three bacterial species, W. cibaria p3B revealed maximum antiproliferative activity against HeLa and Caco-2 cancer cells, all of which were nontoxic to INT-407 cells. Apart from being non-hemolytic, the bacterial isolates did not display any necrotic inhibition in HeLa and Caco-2 cells. The cell free supernatant (CFS) of the three bacterial isolates were tested for the production of antimicrobial peptides or bacteriocins. It found that the CFS of bacterial isolates was stable at various temperature, pH and sensitive to proteolytic enzymes confirms protenoius in nature of the antimicrobil peptides or bacteriocins.

CONCLUSION

The bacterial isolates showed promising antimicrobial, antioxidant as well as antiproliferative activities with better survival ability at different pH and bile concentrations. The three bacterial isolates were able to produce potential antimicrobial peptides or bacteriocins.

SIGNIFICANCE AND IMPACT OF THE STUDY

These results indicate better compatibility of our bacterial isolates against synthetic drugs to avoid adverse side effects and can be processed as dietary supplements against food and human pathogens. They can also provide antioxidative and antiproliferative benefits to humans and animals.

The use of intravenous lidocaine for postoperative pain and recovery: international consensus statement on efficacy and safety

Intravenous lidocaine is used widely for its effect on postoperative pain and recovery but it can be, and has been, fatal when used inappropriately and incorrectly. The risk-benefit ratio of i.v. lidocaine varies with type of surgery and with patient factors such as comorbidity (including pre-existing chronic pain). This consensus statement aims to address three questions. First, does i.v. lidocaine effectively reduce postoperative pain and facilitate recovery? Second, is i.v. lidocaine safe? Third, does the fact that i.v. lidocaine is not licensed for this indication affect its use? We suggest that i.v. lidocaine should be regarded as a 'high-risk' medicine. Individual anaesthetists may feel that, in selected patients, i.v. lidocaine may be beneficial as part of a multimodal peri-operative pain management strategy. This approach should be approved by hospital medication governance systems, and the individual clinical decision should be made with properly informed consent from the patient concerned. If i.v. lidocaine is used, we recommend an initial dose of no more than 1.5 mg.kg^-1 , calculated using the patient's ideal body weight and given as an infusion over 10 min. Thereafter, an infusion of no more than 1.5 mg.kg^-1 .h^-1 for no longer than 24 h is recommended, subject to review and re-assessment. Intravenous lidocaine should not be used at the same time as, or within the period of action of, other local anaesthetic interventions. This includes not starting i.v. lidocaine within 4 h after any nerve block, and not performing any nerve block until 4 h after discontinuing an i.v. lidocaine infusion.

1015 Sleep Duration and Physical and Mental Health Among Adult Survivors of Childhood Cancer: Results from the St. Jude Lifetime Cohort

Introduction

Sleep disturbances are prevalent among adult survivors of childhood cancer, though little is known about associations between sleep and health in this vulnerable population.

Methods

Survivors recruited from the St. Jude Lifetime Cohort (n=911; 52% female; mean age 34 years; 26 years post-diagnosis) completed surveys assessing habitual sleep patterns and mental health and underwent comprehensive physical examinations. A subset of survivors (n=491) completed sleep actigraphy. Short sleep duration was defined as sleeping <7 hours per night, assessed via self-report or actigraphy. Clinically-assessed health outcomes were defined as grade ≥2 using modified CTCAE criteria for cardiac, pulmonary, and renal conditions. Anxiety and depression were defined as scores ≥90th percentile on the Brief Symptom Inventory-18. Covariates included childhood cancer treatment exposures, demographics, body mass index, and physical inactivity. Separate logistic or modified Poisson (common outcomes) regression models were computed for each health category to estimate odds ratios (OR) or relative risks (RR) and 95% confidence intervals (CI).

Results

Self-report and actigraphy-assessed short sleep was identified in 44% and 42% of survivors, respectively. However, these measures were weakly correlated (r=0.23). In adjusted multivariable models, self-reported short sleep was associated with higher risk of pulmonary conditions (RR=1.3, 95% CI=1.1-1.7), depression (OR=2.6, 95% CI=1.4-5.1) and anxiety (OR=3.4, 95% CI=1.6-6.8), while associations with cardiac (RR=1.10, 95% CI=0.94-1.30) and renal conditions (OR=1.30, 95% CI=0.79-2.13) were not significant. There were no significant associations between actigraphy-assessed short sleep and any of the health outcomes.

Conclusion

Habitual self-reported short sleep was associated with clinically ascertained adverse health outcomes. Although the temporality of these associations cannot be determined in this cross-sectional study, sleep is a modifiable health behavior and improving sleep may improve health in survivors. Measures of self-reported sleep may have unique value when assessing the relationship between sleep and health.

Support

CA225590, K. Krull Principal Investigator; CA195547, M. Hudson and L. Robison Principal Investigators; CA21765, C. Roberts, Principal Investigator

TBX1 Regulates Chondrocyte Maturation in the Spheno-occipital Synchondrosis

The synchondrosis in the cranial base is an important growth center for the craniofacial region. Abnormalities in the synchondroses affect the development of adjacent regions, including the craniofacial skeleton. Here, we report that the transcription factor TBX1, the candidate gene for DiGeorge syndrome, is expressed in mesoderm-derived chondrocytes and plays an essential and specific role in spheno-occipital synchondrosis development by inhibiting the expression of genes involved in chondrocyte hypertrophy and osteogenesis. In Tbx1-deficient mice, the spheno-occipital synchondrosis was completely mineralized at birth. TBX1 interacts with RUNX2, a master molecule of osteoblastogenesis and a regulator of chondrocyte maturation, and suppresses its transcriptional activity. Indeed, deleting Tbx1 triggers accelerated mineralization due to accelerated chondrocyte differentiation, which is associated with ectopic expression of downstream targets of RUNX2 in the spheno-occipital synchondrosis. These findings reveal that TBX1 acts as a regulator of chondrocyte maturation and osteogenesis during the spheno-occipital synchondrosis development. Thus, the tight regulation of endochondral ossification by TBX1 is crucial for the normal progression of chondrocyte differentiation in the spheno-occipital synchondrosis.

Speciation of organic fractions does matter for aerosol source apportionment. Part 3: Combining off-line and on-line measurements

The present study proposes an advanced methodology to refine the source apportionment of organic aerosol (OA). This methodology is based on the combination of offline and online datasets in a single Positive Matrix Factorization (PMF) analysis using the multilinear engine (ME-2) algorithm and a customized time synchronization procedure. It has been applied to data from measurements conducted in the Paris region (France) during a PM pollution event in March 2015. Measurements included OA ACSM (Aerosol Chemical Speciation Monitor) mass spectra and specific primary and secondary organic molecular markers from PM₁₀ filters on their original time resolution (30 min for ACSM and 4 h for PM₁₀ filters). Comparison with the conventional PMF analysis of the ACSM OA dataset (PMF-ACSM) showed very good agreement for the discrimination between primary and secondary OA fractions with about 75% of the OA mass of secondary origin. Furthermore, the use of the combined datasets allowed the deconvolution of 3 primary OA (POA) factors and 7 secondary OA (SOA) factors. A clear identification of the source/origin of 54% of the total SOA mass could be achieved thanks to specific molecular markers. Specifically, 28% of that fraction was linked to combustion sources (biomass burning and traffic emissions). A clear identification of primary traffic OA was also obtained using the PMF-combined analysis while PMF-ACSM only gave a proxy for this OA source in the form of total hydrocarbon-like OA (HOA) mass concentrations. In addition, the primary biomass burning-related OA source was explained by two OA factors, BBOA and OPOA-like BBOA. This new approach has showed undeniable advantages over the conventional approaches by providing valuable insights into the processes involved in SOA formation and their sources. However, the origins of highly oxidized SOA could not be fully identified due to the lack of specific molecular markers for such aged SOA.

The Impact of Persistent Leukoencephalopathy on Brain White Matter Microstructure in Long-Term Survivors of Acute Lymphoblastic Leukemia Treated with Chemotherapy Only

BACKGROUND AND PURPOSE

Survivors of acute lymphoblastic leukemia are at risk for neurocognitive deficits and leukoencephalopathy. We performed a longitudinal assessment of leukoencephalopathy and its associations with long-term brain microstructural white matter integrity and neurocognitive outcomes in survivors of childhood acute lymphoblastic leukemia treated on a modern chemotherapy-only protocol.

MATERIALS AND METHODS

One hundred seventy-three survivors of acute lymphoblastic leukemia (49% female), treated on a chemotherapy-only protocol, underwent brain MR imaging during active therapy and repeat imaging and neurocognitive testing at follow-up (median, 13.5 years of age; interquartile range, 10.7-17.6 years; median time since diagnosis, 7.5 years; interquartile range, 6.3-9.1 years). Persistence of leukoencephalopathy was examined in relation to demographic and treatment data and to brain DTI in major fiber tracts and neurocognitive testing at follow-up.

RESULTS

Leukoencephalopathy was found in 52 of 173 long-term survivors (30.0%) and persisted in 41 of 52 (78.8%) who developed it during therapy. DTI parameters were associated with leukoencephalopathy in multiple brain regions, including the corona radiata (fractional anisotropy, P = .001; mean diffusivity, P < .001), superior longitudinal fasciculi (fractional anisotropy, P = .02; mean diffusivity, P < .001), and superior fronto-occipital fasciculi (fractional anisotropy, P = .006; mean diffusivity, P < .001). Mean diffusivity was associated with neurocognitive impairment including in the genu of the corpus callosum (P = .04), corona radiata (P = .02), and superior fronto-occipital fasciculi (P = .02).

CONCLUSIONS

Leukoencephalopathy during active therapy and neurocognitive impairment at long-term follow-up are associated with microstructural white matter integrity. DTI may be more sensitive than standard MR imaging for detection of clinically consequential white matter abnormalities in childhood acute lymphoblastic leukemia survivors treated with chemotherapy and in children undergoing treatment.

Speciation of organic fractions does matter for aerosol source apportionment. Part 2: Intensive short-term campaign in the Paris area (France)

The present study aimed at performing PM₁₀ source apportionment, using positive matrix factorization (PMF), based on filter samples collected every 4h at a sub-urban station in the Paris region (France) during a PM pollution event in March 2015 (PM₁₀>50μgm^-3 for several consecutive days). The PMF model allowed to deconvolve 11 source factors. The use of specific primary and secondary organic molecular markers favoured the determination of common sources such as biomass burning and primary traffic emissions, as well as 2 specific biogenic SOA (marine+isoprene) and 3 anthropogenic SOA (nitro-PAHs+oxy-PAHs+phenolic compounds oxidation) factors. This study is probably the first one to report the use of methylnitrocatechol isomers as well as 1-nitropyrene to apportion secondary OA linked to biomass burning emissions and primary traffic emissions, respectively. Secondary organic carbon (SOC) fractions were found to account for 47% of the total OC. The use of organic molecular markers allowed the identification of 41% of the total SOC composed of anthropogenic SOA (namely, oxy-PAHs, nitro-PAHs and phenolic compounds oxidation, representing 15%, 9%, 11% of the total OC, respectively) and biogenic SOA (marine+isoprene) (6% in total). Results obtained also showed that 35% of the total SOC originated from anthropogenic sources and especially PAH SOA (oxy-PAHs+nitro-PAHs), accounting for 24% of the total SOC, highlighting its significant contribution in urban influenced environments. Anthropogenic SOA related to nitro-PAHs and phenolic compounds exhibited a clear diurnal pattern with high concentrations during the night indicating the prominent role of night-time chemistry but with different chemical processes involved.

Subjective and objective evaluation of frontal smile esthetics in patients with facial asymmetry-a comparative cross-sectional study

AIM AND OBJECTIVES

To analyze the relationship between subjective and objective evaluations of pre-treatment posed smiles in patients with facial asymmetry and to assess the influence of dentofacial structures involved in asymmetry on the perception of smile attractiveness.

SAMPLE

Thirty-five patients (25 males and 10 females) between 18 and 25 years of age with facial asymmetry were selected.

MATERIALS AND METHODS

Pre-treatment clinical photographs of posed smiles were subjectively evaluated by a panel of 20 orthodontists, 20 oral surgeons, and 20 laypersons. A customized Smile Mesh program was used for objective evaluation of the same smiles. Direct comparison among three smile groups (unattractive, slightly attractive, and attractive) for different Smile Mesh measurements was carried out using two-way anova test. Additionally, linear regression was performed to evaluate whether these measurements could predict the attractiveness of captured smiles.

RESULTS

Patients with 'slightly attractive' smiles had a significantly greater distance between the incisal margin of the maxillary central incisor and the lower lip during smiling. The Smile Index was significantly greater in attractive smiles. However, based on the coefficients of linear regression, no objectively gathered measurement could predict smile attractiveness.

CONCLUSIONS

Attractiveness or unattractiveness of smiles in patients with facial asymmetry could not be predicted by any measurement of Smile Mesh. The presence of facial asymmetry did not significantly influence the perception of smile esthetics.

Crystal structure and thermoelectric properties of Sr-Mo substituted CaMnO3: a combined experimental and computational study

A combination of experimental and computational techniques has been employed to study doping effects in perovskite CaMnO₃. High quality Sr-Mo co-substituted CaMnO₃ ceramics were prepared by the conventional mixed oxide route. Crystallographic data from X-ray and electron diffraction showed an orthorhombic to tetragonal symmetry change on increasing the Sr content, suggesting that Sr widens the transition temperature in CaMnO₃ preventing phase transformation-cracking on cooling after sintering, enabling the fabrication of high density ceramics. Atomically resolved imaging and analysis showed a random distribution of Sr in the A-site of the perovskite structure and revealed a boundary structure of 90° rotational twin boundaries across {101}_orthorhombic; the latter are predominant phonon scattering sources to lower the thermal conductivity as suggested by molecular dynamics calculations. The effect of doping on the thermoelectric properties was evaluated. Increasing Sr substitution reduces the Seebeck coefficient but the power factor remains high due to improved densification by Sr substitution. Mo doping generates additional charge carriers due to the presence of Mn³⁺ in the Mn⁴⁺ matrix, reducing electrical resistivity. The major impact of Sr on thermoelectric behaviour is the reduction of the thermal conductivity as shown experimentally and by modelling. Strontium containing ceramics showed thermoelectric figure of merit (ZT) values higher than 0.1 at temperatures above 850 K. Ca_0.7Sr_0.3Mn_0.96Mo_0.04O₃ ceramics exhibit enhanced properties with S_1000K = -180 μV K^-1, ρ_1000K = 5 × 10^-5 Ωm, k_1000K = 1.8 W m^-1 K^-1 and ZT ≈ 0.11 at 1000 K.

Associations between IL-1RA polymorphisms and small intestinal bacterial overgrowth among patients with irritable bowel syndrome from India

BACKGROUND

Low-grade inflammation (controlled by pro and anti-inflammatory molecules), induced by gut microbes in patients with small intestinal bacterial overgrowth (SIBO), may be associated with irritable bowel syndrome (IBS). Polymorphisms of IL-RA gene (anti-inflammatory) was evaluated in IBS and healthy subjects (HS); small intestinal mucosal IL-1α and β levels (pro-inflammatory) in relation to the presence of SIBO were evaluated in a subset of patients.

METHODS

Two hundred and twenty-one IBS patients and 273 age- and gender-matched HS were included. Exactly 209 of 221 patients (Rome III) and 273 HS were genotyped (PCR) for IL-1RA polymorphism. Mucosal IL-1α and β levels (pg/mg of biopsy) were estimated (ELISA) in 82/221 patients with and without SIBO (≥10(5)  CFU/mL upper gut aspirate bacteria).

KEY RESULTS

Genotype 1/1 (IL-1RA over-producer) was less frequent among patients than controls (p = 0.007); genotypes 1/3 (p = 0.012, OR = 3.301, 95% CI = 1.31-8.35) and 2/3 (both under-producers; p = 0.009, OR = 7.703, 95% CI = 1.66-35.82) were commoner among IBS. Fifteen of 82 (18.3%) patients had SIBO. Levels of IL-1α and β were higher among patients with SIBO than without (IL-1α: 35.4 [20.1-66.8] vs 25.5 [4.2-65.3], p < 0.001; IL-1β: 206.8 [133.5-365.9] vs 93.1 [25.5-197.7], p < 0.001) and those with bloating than without (p = 0.012; p = 0.015). IL-1β was higher among patients with Bristol stool type 6 than those with type 1-2 (p = 0.002) and type 3-5 (p = 0.007).

CONCLUSIONS & INFERENCES

Polymorphisms 1/1 (IL-1RA over-producer) was infrequent and 1/3 and 2/3 (under-producers) frequent among IBS. Increased IL-1α and β levels were associated with SIBO. Increased IL-1β level was predominantly associated with bloating and loose stools (Bristol type 6).

Comparison of foetomaternal circulation in normal pregnancies and pregnancy induced hypertension using color Doppler studies

The aim of present study was to assess fetomaternal blood flows in normal and abnormal pregnancies using color Doppler indices. Subjects were divided into two groups as: Group A of 25 subjects of normal pregnancy as controls and group B of 25 subjects of pregnancy induced hypertension. All the subjects were lying in the age-group of 25-35 years and having 28 to 34 weeks of gestation; the patients were evaluated by detailed history and were subjected to complete general examination. Blood pressure was taken on two occasions at least 6 hours apart. Systemic examination and obstetrical examination was done in all subjects. All cases were subjected to pathological tests- Haemogram, Test for proteins in urine. Ultrasound assessment of fetal growth was done by measuring BPD (Biparietal diameter), HC (Head circumference), FL (Femur length) and AC (Abdominal circumference): Average gestational age and effective fetal weight was then calculated by ultrasound machine. Color Doppler was used to assess the various Doppler indices indices: Pulsatility index (PI), Resistive index (RI) and Systolic diastolic ratio (S/D ratio) in bilateral uterine, umbilical and middle cerebral arteries and compared to the standard normograms. Percentage of subjects having abnormal Doppler indices were calculated. Assessment of percentage of SGA (small for gestational age) fetuses was done in all the three groups. Decline in mean values of all Doppler indices was found with advancing gestational age in normal pregnancy suggesting decreased vascular resistance and increased blood flow in fetomaternal circulation. In pregnancy induced hypertensives, the mean values of Doppler indices showed a decline as in normal pregnancy but showed an increase (more than 2 S.D. of the mean) for that gestational age in comparison to the control group suggesting increased impedance to blood flow in uteroplacental and fetomaternal circulation. Umbilical artery Doppler indices were found to be the most sensitive indicator of uteroplacental and fetoplacental insufficiency in pregnancy induced hypertensives (P = 0.001). Thus we concluded that color Doppler can detect changes in fetomaternal circulation which correlate strongly with the fetal growth and therefore associated with pregnancy outcome.

Mahogunin-mediated α-tubulin ubiquitination via noncanonical K6 linkage regulates microtubule stability and mitotic spindle orientation

Mahogunin ring finger-1 (MGRN1) is a cytosolic ubiquitin ligase whose disruption or interaction with some isoforms of cytosolically exposed prion protein leads to spongiform neurodegeneration and also lack of which results in reduced embryonic viability due to mispatterning of the left–right (LR) axis during development. Here we demonstrate an interaction between the cytoskeletal protein α-tubulin and MGRN1. In cultured cell systems, loss of the ubiquitin E3 ligase activity of MGRN1 results in spindle misorientation and decreased α-tubulin polymerization, an effect also seen in primary cells. α-Tubulin was post-translationally modified by MGRN1 via noncanonical K6-linked polyubiquitination. This was significant because expression of catalytically inactive MGRN1 and/or ubiquitin mutant capable of only monoubiquitination resulted in similar mitotic spindle misorientation. The modulatory effect of MGRN1 was specific for α-tubulin and similar changes could not be detected in β- or γ-tubulin. However, catalytic inactivation of MGRN1 did not abrogate monoubiquitination of α-tubulin, thus unraveling a unique dual mode of ubiquitination by an unknown E3 ligase and MGRN1. MGRN1-mediated α-tubulin modification, and hence its stability, may highlight a key event in the LR patterning during embryogenesis.

Combining Molecular Dynamics and Monte Carlo Simulations to Model Chemical Vapor Deposition: Application to Diamond

Gas-surface reactions of the type that contribute to growth during the chemical vapor deposition (CVD) of diamond films are generally completed in picoseconds, well within timescales accessible by molecular dynamics (MD) simulations. For low-pressure deposition, however, the time between collisions for a surface site can be microseconds, which makes direct modeling of CVD crystal growth impossible using standard MD methods. To effectively bridge this discrepancy in timescales, the gas-surface reactions can be modeled using MD trajectories, and then this data can be used to define probabilities in a Monte Carlo algorithm where each step represents a gas-surface collision. We illustrate this approach using the reaction of atomic hydrogen with a diamond (111) surface as an example, where we use abstraction and sticking probabilities generated using classical trajectories in a simple Monte Carlo algorithm to determine the number of open sites as a function of temperature. We also include models for the thermal desorption of hydrogen that predict that growth temperatures are not restricted by the thermal loss of chemisorbed hydrogen.

Concentration effect on tuning of block copolymer-mediated synthesis of gold nanoparticles

Synthesis of gold nanoparticles has been examined using triblock copolymer Pluronic P85 (EO26PO39EO26) at different concentrations as a function of hydrogen tetrachloroaureate (III) hydrate (HAuCl4 x 3H2O) in aqueous solution. The concentration of P85 block copolymer was varied from 0.5 to 2 wt% at fixed temperature (30 degrees C) in presence of HAuCl4 x 3H2O in the range of 0.002 to 0.2 wt% for each P85 concentration. The surface plasmon resonance in the time-dependent UV-visible spectra reveals that increase in the block copolymer concentration increases the yield of the gold nanoparticles but decreases their stability. Both small-angle neutron scattering (SANS) and dynamic light scattering (DLS) show that the number density of block copolymer micelles increase almost linearly with the concentration, which is related to result in higher numbers of nucleation centers and therefore increase in the yield of gold nanoparticles. The fact that increase in the number density of nanoparticles also increases the chances of aggregation and this tends to decrease the stability at higher block copolymer concentration. Transmission electron microscopy (TEM) images confirm the larger sizes of the nanoparticles formed in these systems at higher concentrations.

Temporal trends in cause-specific late mortality among five-year survivors of childhood cancer

10004

Background: Five-year survival rates for childhood cancer have increased over the past 4 decades, increasing the number of long-term survivors. Among 5-yr survivors, the impact of changes in therapy on cause-specific late mortality has not been thoroughly assessed. Methods: Late mortality was evaluated over 3 eras (1974–81, 1982–90, 1991–2000) in 26,643 5-year survivors diagnosed <21 years of age from the SEER population-based registry. Cause-specific mortality was categorized as death from recurrence/progression of primary disease, external causes, and non-recurrence/non-external causes (Non-Recur/Ext) (i.e., deaths from health conditions including sequelae of cancer therapy). Results: All-cause and Recurrence mortality was significantly lower in more recent eras ( Table ). No significant improvement in late mortality attributable to Non-Recur/Ext causes was seen. Additionally, all-cause mortality was significantly lower in more recent eras for 5-year survivors of ALL, AML, Hodgkin, NHL, and CNS tumors, but not neuroblastoma and Ewing's Sarcoma where an increase in cumulative incidence of late mortality was seen in more recent eras. Significant improvement in late mortality from Recurrence by era was seen in most diagnostic groups. Conclusions: All-cause late mortality has improved with more recent eras, attributable to reduced rates of mortality from progression of primary disease (i.e., durable remission). Importantly, however, efforts to reduce the toxicity of more recent therapies have not produced detectable reduction in mortality attributable to other health conditions including sequelae of cancer therapy (non-Recur/Ext causes of death), which would include death from second malignancy, cardiac and pulmonary conditions. Worsening late mortality for 5-year survivors of neuroblastoma and Ewing's sarcoma may be due to improved use of salvage therapies that delay, but do not ultimately prevent death. [Table: see text]

No significant financial relationships to disclose.