Medium composition overturns the widely accepted sulfate-dependent repression of desulfurization phenotype in Rhodococcus qingshengii IGTS8

Microbial desulfurization has been extensively studied as a promising alternative to the widely applied chemical desulfurization process. Sulfur removal from petroleum and its products becomes essential, as the environmental regulations become increasingly stringent. Rhodococcus qingshengii IGTS8 has gained ground as a naturally occurring model biocatalyst, due to its superior specific activity for desulfurization of dibenzothiophene (DBT). Recalcitrant organic sulfur compounds-DBT included-are preferentially removed by selective carbon-sulfur bond cleavage to avoid a reduction in the calorific value of the fuel. The process, however, still has not reached economically sustainable levels, as certain limitations have been identified. One of those bottlenecks is the repression of catalytic activity caused by ubiquitous sulfur sources such as inorganic sulfate, methionine, or cysteine. Herein, we report an optimized culture medium for wild-type stain IGTS8 that completely alleviates the sulfate-mediated repression of biodesulfurization activity without modification of the natural biocatalyst. Medium C not only promotes growth in the presence of several sulfur sources, including DBT, but also enhances biodesulfurization of resting cells grown in the presence of up to 5 mM sulfate. Based on the above, the present work can be considered as a step towards the development of a more viable commercial biodesulfurization process.

Deciphering the biodesulfurization potential of two novel Rhodococcus isolates from a unique Greek environment

Sustainable biodesulfurization (BDS) processes require the use of microbial biocatalysts that display high activity against the recalcitrant heterocyclic sulfur compounds and can simultaneously withstand the harsh conditions of contact with petroleum products, inherent to any industrial biphasic BDS system. In this framework, the functional microbial BDS-related diversity in a naturally oil-exposed ecosystem, was examined through a 4,6-dimethyl-dibenzothiophene based enrichment process. Two new Rhodococcus sp. strains were isolated, which during a medium optimization process revealed a significantly enhanced BDS activity profile when compared to the model strain R. qingshengii IGTS8. In biocatalyst stability studies conducted in biphasic mode using partially hydrodesulfurized diesel under various process conditions, the new strains also presented an enhanced stability phenotype. In these studies, it was also demonstrated for all strains, that the BDS activity losses were decoupled from the overall cells' viability, in addition to the fact that the use of whole-broth biocatalyst positively affected BDS performance.

Biochemical and Thermodynamic Studies on a Novel Thermotolerant GH10 Xylanase from Bacillus safensis

Xylanases have a broad range of applications in agro-industrial processes. In this study, we report on the discovery and characterization of a new thermotolerant GH10 xylanase from Bacillus safensis, designated as BsXyn10. The xylanase gene (bsxyn10) was cloned from Bacillus safensis and expressed in Escherichia coli. The reduced molecular mass of BsXyn10 was 48 kDa upon SDS-PAGE. Bsxyn10 was optimally active at pH 7.0 and 60 °C, stable over a broad range of pH (5.0–8.0), and also revealed tolerance toward different modulators (metal cations, EDTA). The enzyme was active toward various xylans with no activity on the glucose-based polysaccharides. K_M, v_max, and k_cat for oat spelt xylan hydrolysis were found to be 1.96 g·L⁻¹, 58.6 μmole·min⁻¹·(mg protein)⁻¹, and 49 s⁻¹, respectively. Thermodynamic parameters for oat spelt xylan hydrolysis at 60 °C were ΔS* = −61.9 J·mol⁻¹·K⁻¹, ΔH* = 37.0 kJ·mol⁻¹ and ΔG* = 57.6 kJ·mol⁻¹. BsXyn10 retained high levels of activity at temperatures up to 60 °C. The thermodynamic parameters (ΔH*_D, ΔG*_D, ΔS*_D) for the thermal deactivation of BsXyn10 at a temperature range of 40–80 °C were: 192.5 ≤ ΔH*_D ≤ 192.8 kJ·mol⁻¹, 262.1 ≤ ΔS*_D ≤ 265.8 J·mol⁻¹·K⁻¹, and 99.9 ≤ ΔG*_D ≤ 109.6 kJ·mol⁻¹. The BsXyn10-treated oat spelt xylan manifested the catalytic release of xylooligosaccharides of 2–6 DP, suggesting that BsXyn10 represents a promising candidate biocatalyst appropriate for several biotechnological applications.

Doing synthetic biology with photosynthetic microorganisms

The use of photosynthetic microbes as synthetic biology hosts for the sustainable production of commodity chemicals and even fuels has received increasing attention over the last decade. The number of studies published, tools implemented, and resources made available for microalgae have increased beyond expectations during the last few years. However, the tools available for genetic engineering in these organisms still lag those available for the more commonly used heterotrophic host organisms. In this mini-review, we provide an overview of the photosynthetic microbes most commonly used in synthetic biology studies, namely cyanobacteria, chlorophytes, eustigmatophytes and diatoms. We provide basic information on the techniques and tools available for each model group of organisms, we outline the state-of-the-art, and we list the synthetic biology tools that have been successfully used. We specifically focus on the latest CRISPR developments, as we believe that precision editing and advanced genetic engineering tools will be pivotal to the advancement of the field. Finally, we discuss the relative strengths and weaknesses of each group of organisms and examine the challenges that need to be overcome to achieve their synthetic biology potential.

Microbial bioprospecting for lignocellulose degradation at a unique Greek environment

Bacterial systems have gained wide attention for depolymerization of lignocellulosic biomass, due to their high functional diversity and adaptability. To achieve the full microbial exploitation of lignocellulosic residues and the cost-effective production of bioproducts within a biorefinery, multiple metabolic pathways and enzymes of various specificities are required. In this work, highly diverse aerobic, mesophilic bacteria enriched from Keri Lake, a pristine marsh of increased biomass degradation and natural underground oil leaks, were explored for their metabolic versatility and enzymatic potential towards lignocellulosic substrates. A high number of Pseudomonas species, obtained from enrichment cultures where organosolv lignin served as the sole carbon and energy source, were able to assimilate a range of lignin-associated aromatic compounds. Comparatively more complex bacterial consortia, including members of Actinobacteria, Proteobacteria, Bacilli, Sphingobacteria, and Flavobacteria, were also enriched from cultures with xylan or carboxymethyl cellulose as sole carbon sources. Numerous individual isolates could target diverse structural lignocellulose polysaccharides by expressing hydrolytic activities on crystalline or amorphous cellulose and xylan. Specific isolates showed increased potential for growth in lignin hydrolysates prepared from alkali pretreated agricultural wastes. The results suggest that Keri isolates represent a pool of effective lignocellulose degraders with significant potential for industrial applications in a lignocellulose biorefinery.

Characterization of the Highly Efficient Acid-Stable Xylanase and β-Xylosidase System from the Fungus Byssochlamys spectabilis ATHUM 8891 (Paecilomyces variotii ATHUM 8891)

Two novel xylanolytic enzymes, a xylanase and a β-xylosidase, were simultaneously isolated and characterized from the extracellular medium of Byssochlamys spectabilis ATHUM 8891 (anamorph Paecilomyces variotii ATHUM 8891), grown on Brewer’s Spent Grain as a sole carbon source. They represent the first pair of characterized xylanolytic enzymes of the genus Byssochlamys and the first extensively characterized xylanolytic enzymes of the family Thermoascaceae. In contrast to other xylanolytic enzymes isolated from the same family, both enzymes are characterized by exceptional thermostability and stability at low pH values, in addition to activity optima at temperatures around 65 °C and acidic pH values. Applying nano-LC-ESI-MS/MS analysis of the purified SDS-PAGE bands, we sequenced fragments of both proteins. Based on sequence-comparison methods, both proteins appeared conserved within the genus Byssochlamys. Xylanase was classified within Glycoside Hydrolase family 11 (GH 11), while β-xylosidase in Glycoside Hydrolase family 3 (GH 3). The two enzymes showed a synergistic action against xylan by rapidly transforming almost 40% of birchwood xylan to xylose. The biochemical profile of both enzymes renders them an efficient set of biocatalysts for the hydrolysis of xylan in demanding biorefinery applications.

Bactericides Based on Copper Nanoparticles Restrain Growth of Important Plant Pathogens

Copper nanoparticles (CuNPs) can offer an alternative to conventional copper bactericides and possibly slow down the development of bacterial resistance. This will consequently lower the accumulation rate of copper to soil and water and lower the environmental and health burden imposed by copper application. Physical and chemical methods have been reported to synthesize CuNPs but their use as bactericides in plants has been understudied. In this study, two different CuNPs products have been developed, CuNP1 and CuNP2 in two respective concentrations (1500 ppm or 300 ppm). Both products were characterized using Dynamic Light Scattering, Transmission Electron Microscopy, Attenuated Total Reflection measurements, X-ray Photoelectron Spectroscopy, X-ray Diffraction and Scattering, and Laser Doppler Electrophoresis. They were evaluated for their antibacterial efficacy in vitro against the gram-negative species Agrobacterium tumefaciens, Dickeya dadantii, Erwinia amylovora, Pectobacterium carotovorum, Pseudomonas corrugata, Pseudomonas savastanoi pv. savastanoi, and Xanthomonas campestris pv. campestris. Evaluation was based on comparisons with two commercial bactericides: Kocide (copper hydroxide) and Nordox (copper oxide). CuNP1 inhibited the growth of five species, restrained the growth of P. corrugata, and had no effect in X. c. pv campestris. MICs were significantly lower than those of the commercial formulations. CuNP2 inhibited the growth of E. amylovora and restrained growth of P. s. pv. savastanoi. Again, its overall activity was higher compared to commercial formulations. An extensive in vitro evaluation of CuNPs that show higher potential compared to their conventional counterpart is reported for the first time and suggests that synthesis of stable CuNPs can lead to the development of low-cost sustainable commercial products.

Sulfate Alters the Competition Among Microbiome Members of Sediments Chronically Exposed to Asphalt

Sulfate-reducing microorganisms (SRMs) often compete with methanogens for common substrates. Due to thermodynamic reasons, SRMs should outcompete methanogens in the presence of sulfate. However, many studies have documented coexistence of these microbial groups in natural environments, suggesting that thermodynamics alone cannot explain the interactions among them. In this study, we investigated how SRMs compete with the established methanogenic communities in sediment from a long-term, electron acceptor-depleted, asphalt-exposed ecosystem and how they affect the composition of the organic material. We hypothesized that, upon addition of sulfate, SRMs (i) outcompete the methanogenic communities and (ii) markedly contribute to transformations of the organic material. We sampled sediments from the test and proximate control sites under anoxic conditions and incubated them in seawater medium with or without sulfate. Abundance and activity pattern of SRMs and methanogens, as well as the total prokaryotic community, were followed for 6 weeks by using qPCR targeting selected marker genes. Some of these genes were also subjected to amplicon sequencing to assess potential shifts in diversity patterns. Alterations of the organic material in the microcosms were determined by mass spectrometry. Our results indicate that the competition of SRMs with methanogens upon sulfate addition strongly depends on the environment studied and the starting microbiome composition. In the asphalt-free sediments (control), the availability of easily degradable organic material (mainly plant-derived) allows SRMs to use a larger variety of substrates, reducing interspecies competition with methanogens. In contrast, the abundant presence of recalcitrant compounds in the asphalt-exposed sediment was associated with a strong competition between SRMs and methanogens, ultimately detrimental for the latter. Our data underpin the importance of the quality of bioavailable organic materials in anoxic environments as a driver for microbial community structure and function.

Catalytic and thermodynamic properties of an acidic α-amylase produced by the fungus Paecilomyces variotii ATHUM 8891

An extracellular acid stable α-amylase from Paecilomyces variotii ATHUM 8891 (PV8891 α-amylase) was purified to homogeneity applying ammonium sulfate fractionation, ion exchange and gel filtration chromatography and exhibited a reduced molecular weight of 75 kDa. The purified enzyme was optimally active at pH 5.0 and 60 °C and stable in acidic pH (3.0-6.0). K _m, v _max and k _cat for starch hydrolysis were found 1.1 g L^-1, 58.5 μmole min^-1 (mg protein)^-1, and 73.1 s^-1, respectively. Amylase activity was marginally enhanced by Ca²⁺ and Fe²⁺ ions while Cu²⁺ ions strongly inhibited it. Thermodynamic parameters determined for starch hydrolysis (Ε _α, ΔH*, ΔG*, ΔS*, Δ G E - S ∗ and Δ G E - T ∗ ) suggests an effective capacity of PV8891 α-amylase towards starch hydrolysis. Thermal stability of PV8891 α-amylase was assessed at different temperatures (30-80 ^οC). Thermodynamic parameters ( E a d , ΔH*, ΔG*, ΔS*) as well as the integral activity of a continuous system for starch hydrolysis by the PV8891 α-amylase revealed satisfactory thermostability up to 60 °C. The acidic nature and its satisfactory performance at temperatures lower than the industrially used amylases may represent potential applications of PV8891 α-amylase in starch processing industry.

Τhe Nematicidal Potential of Bioactive Streptomyces Strains Isolated from Greek Rhizosphere Soils Tested on Arabidopsis Plants of Varying Susceptibility to Meloidogyne spp

A total of 461 indigenous Streptomycetes strains recovered from various Greek rhizosphere habitats were tested for their bioactivity. All isolates were examined for their ability to suppress the growth of 12 specific target microorganisms. Twenty-six were found to exert antimicrobial activity and were screened for potential nematicidal action. S. monomycini ATHUBA 220, S. colombiensis ATHUBA 438, S. colombiensis ATHUBA 431, and S. youssoufensis ATHUBA 546 were proved to have a nematicidal effect and thus were further sequenced. Batch culture supernatants and solvent extracts were assessed for paralysis on Meloidogyne javanica and Meloidogyne incognita second-stage juveniles (J2). The solvent extracts of S. monomycini ATHUBA 220 and S. colombiensis ATHUBA 438 had the highest paralysis rates, so these Streptomycetes strains were further on tested for nematodes' biological cycle arrest on two Arabidopsis thaliana plants; the wild type (Col-0) and the katanin mutant fra2, which is susceptible to M. incognita. Interestingly, S. monomycini ATHUBA 220 and S. colombiensis ATHUBA 438 were able to negatively affect the M. incognita biological cycle in Col-0 and fra2 respectively, and increased growth in Col-0 upon M. incognita infection. However, they were ineffective against M. javanica. Fra2 plants were also proved susceptible to M. javanica infestation, with a reduced growth upon treatments with the Streptomyces strains. The nematicidal action and the plant-growth modulating abilities of the selected Streptomycetes strains are discussed.

XynDZ5: A New Thermostable GH10 Xylanase

Xylanolytic enzymes have a broad range of applications in industrial biotechnology as biocatalytic components of various processes and products, such as food additives, bakery products, coffee extraction, agricultural silage and functional foods. An increasing market demand has driven the growing interest for the discovery of xylanases with specific industrially relevant characteristics, such as stability at elevated temperatures and in the presence of other denaturing factors, which will facilitate their incorporation into industrial processes. In this work, we report the discovery and biochemical characterization of a new thermostable GH10 xylanase, termed XynDZ5, exhibiting only 26% amino acid sequence identity to the closest characterized xylanolytic enzyme. This new enzyme was discovered in an Icelandic hot spring enrichment culture of a Thermoanaerobacterium species using a recently developed bioinformatic analysis platform. XynDZ5 was produced recombinantly in Escherichia coli, purified and characterized biochemically. This analysis revealed that it acts as an endo-1,4-β-xylanase that performs optimally at 65–75°C and pH 7.5. The enzyme is capable of retaining high levels of catalytic efficiency after several hours of incubation at high temperatures, as well as in the presence of significant concentrations of a range of metal ions and denaturing agents. Interestingly, the XynDZ5 biochemical profile was found to be atypical, as it also exhibits significant exo-activity. Computational modeling of its three-dimensional structure predicted a (β/α)₈ TIM barrel fold, which is very frequently encountered among family GH10 enzymes. This modeled structure has provided clues about structural features that may explain aspects of its catalytic performance. Our results suggest that XynDZ5 represents a promising new candidate biocatalyst appropriate for several high-temperature biotechnological applications in the pulp, paper, baking, animal-feed and biofuel industries.

Creation of a functional hyperthermostable designer cellulosome

BACKGROUND

Renewable energy has become a field of high interest over the past decade, and production of biofuels from cellulosic substrates has a particularly high potential as an alternative source of energy. Industrial deconstruction of biomass, however, is an onerous, exothermic process, the cost of which could be decreased significantly by use of hyperthermophilic enzymes. An efficient way of breaking down cellulosic substrates can also be achieved by highly efficient enzymatic complexes called cellulosomes. The modular architecture of these multi-enzyme complexes results in substrate targeting and proximity-based synergy among the resident enzymes. However, cellulosomes have not been observed in hyperthermophilic bacteria.

RESULTS

Here, we report the design and function of a novel hyperthermostable "designer cellulosome" system, which is stable and active at 75 °C. Enzymes from Caldicellulosiruptor bescii, a highly cellulolytic hyperthermophilic anaerobic bacterium, were selected and successfully converted to the cellulosomal mode by grafting onto them divergent dockerin modules that can be inserted in a precise manner into a thermostable chimaeric scaffoldin by virtue of their matching cohesins. Three pairs of cohesins and dockerins, selected from thermophilic microbes, were examined for their stability at extreme temperatures and were determined stable at 75 °C for at least 72 h. The resultant hyperthermostable cellulosome complex exhibited the highest levels of enzymatic activity on microcrystalline cellulose at 75 °C, compared to those of previously reported designer cellulosome systems and the native cellulosome from Clostridium thermocellum.

CONCLUSION

The functional hyperthermophilic platform fulfills the appropriate physico-chemical properties required for exothermic processes. This system can thus be adapted for other types of thermostable enzyme systems and could serve as a basis for a variety of cellulolytic and non-cellulolytic industrial objectives at high temperatures.

More than 2500 years of oil exposure shape sediment microbiomes with the potential for syntrophic degradation of hydrocarbons linked to methanogenesis

BACKGROUND

Natural oil seeps offer the opportunity to study the adaptation of ecosystems and the associated microbiota to long-term oil exposure. In the current study, we investigated a land-to-sea transition ecosystem called "Keri Lake" in Zakynthos Island, Greece. This ecosystem is unique due to asphalt oil springs found at several sites, a phenomenon already reported 2500 years ago. Sediment microbiomes at Keri Lake were studied, and their structure and functional potential were compared to other ecosystems with oil exposure histories of various time periods.

RESULTS

Replicate sediment cores (up to 3-m depth) were retrieved from one site exposed to oil as well as a non-exposed control site. Samples from three different depths were subjected to chemical analysis and metagenomic shotgun sequencing. At the oil-exposed site, we observed high amounts of asphalt oil compounds and a depletion of sulfate compared to the non-exposed control site. The numbers of reads assigned to genes involved in the anaerobic degradation of hydrocarbons were similar between the two sites. The numbers of denitrifiers and sulfate reducers were clearly lower in the samples from the oil-exposed site, while a higher abundance of methanogens was detected compared to the non-exposed site. Higher abundances of the genes of methanogenesis were also observed in the metagenomes from other ecosystems with a long history of oil exposure, compared to short-term exposed environments.

CONCLUSIONS

The analysis of Keri Lake metagenomes revealed that microbiomes in the oil-exposed sediment have a higher potential for methanogenesis over denitrification/sulfate reduction, compared to those in the non-exposed site. Comparison with metagenomes from various oil-impacted environments suggests that syntrophic interactions of hydrocarbon degraders with methanogens are favored in the ecosystems with a long-term presence of oil.

NmeA, a novel efflux transporter specific for nucleobases and nucleosides, contributes to metal resistance in Aspergillus nidulans

Through Minos transposon mutagenesis we obtained A. nidulans mutants resistant to 5-fluorouracil due to insertions into the upstream region of the uncharacterized gene nmeA, encoding a Major Facilitator Superfamily (MFS) transporter. Minos transpositions increased nmeA transcription, which is otherwise extremely low under all conditions tested. To dissect the function of NmeA we used strains overexpressing or genetically lacking the nmeA gene. Strains overexpressing NmeA are resistant to toxic purine analogues, but also, to cadmium, zinc and borate, whereas an isogenic nmeAΔ null mutant exhibits increased sensitivity to these compounds. We provide direct evidence that nmeA overexpression leads to efflux of adenine, xanthine, uric acid and allantoin, the latter two being intermediate metabolites of purine catabolism that are toxic when accumulated cytoplasmically due to relevant genetic lesions. By using a functional GFP-tagged version we show that NmeA is a plasma membrane transporter. Homology modeling and docking approaches identified a single purine binding site and a tentative substrate translocation trajectory in NmeA. Orthologues of NmeA are present in all Aspergilli and other Eurotiomycetes, but are absent from other fungi or non-fungal organisms. NmeA is thus the founding member of a new class of transporters essential for fungal success under specific toxic conditions.

Insights into the functionality and stability of designer cellulosomes at elevated temperatures

Enzymatic breakdown of lignocellulose is a major limiting step in second generation biorefineries. Assembly of the necessary activities into designer cellulosomes increases the productivity of this step by enhancing enzyme synergy through the proximity effect. However, most cellulosomal components are obtained from mesophilic microorganisms, limiting the applications to temperatures up to 50 °C. We hypothesized that a scaffoldin, comprising modular components of mainly mesophilic origin, can function at higher temperatures when combined with thermophilic enzymes, and the resulting designer cellulosomes could be employed in higher temperature reactions. For this purpose, we used a tetravalent scaffoldin constituted of three cohesins of mesophilic origin as well as a cohesin and cellulose-binding module derived from the thermophilic bacterium Clostridium thermocellum. The scaffoldin was combined with four thermophilic enzymes from Geobacillus and Caldicellulosiruptor species, each fused with a dockerin whose specificity matched one of the cohesins. We initially verified that the biochemical properties and thermal stability of the resulting chimeric enzymes were not affected by the presence of the mesophilic dockerins. Then we examined the stability of the individual single-enzyme-scaffoldin complexes and the full tetravalent cellulosome showing that all complexes are stable and functional for at least 6 h at 60 °C. Finally, within this time frame and conditions, the full complex appeared over 50 % more efficient in the hydrolysis of corn stover compared to the free enzymes. Overall, the results support the utilization of scaffoldin components of mesophilic origin at relatively high temperatures and provide a framework for the production of designer cellulosomes suitable for high temperature biorefinery applications.

Enhancement of cellulosome-mediated deconstruction of cellulose by improving enzyme thermostability

BACKGROUND

The concerted action of three complementary cellulases from Clostridium thermocellum, engineered to be stable at elevated temperatures, was examined on a cellulosic substrate and compared to that of the wild-type enzymes. Exoglucanase Cel48S and endoglucanase Cel8A, both key elements of the natural cellulosome from this bacterium, were engineered previously for increased thermostability, either by SCHEMA, a structure-guided, site-directed protein recombination method, or by consensus-guided mutagenesis combined with random mutagenesis using error-prone PCR, respectively. A thermostable β-glucosidase BglA mutant was also selected from a library generated by error-prone PCR that will assist the two cellulases in their methodic deconstruction of crystalline cellulose. The effects of a thermostable scaffoldin versus those of a largely mesophilic scaffoldin were also examined. By improving the stability of the enzyme subunits and the structural component, we aimed to improve cellulosome-mediated deconstruction of cellulosic substrates.

RESULTS

The results demonstrate that the combination of thermostable enzymes as free enzymes and a thermostable scaffoldin was more active on the cellulosic substrate than the wild-type enzymes. Significantly, "thermostable" designer cellulosomes exhibited a 1.7-fold enhancement in cellulose degradation compared to the action of conventional designer cellulosomes that contain the respective wild-type enzymes. For designer cellulosome formats, the use of the thermostabilized scaffoldin proved critical for enhanced enzymatic performance under conditions of high temperatures.

CONCLUSIONS

Simple improvement in the activity of a given enzyme does not guarantee its suitability for use in an enzyme cocktail or as a designer cellulosome component. The true merit of improvement resides in its ultimate contribution to synergistic action, which can only be determined experimentally. The relevance of the mutated thermostable enzymes employed in this study as components in multienzyme systems has thus been confirmed using designer cellulosome technology. Enzyme integration via a thermostable scaffoldin is critical to the ultimate stability of the complex at higher temperatures. Engineering of thermostable cellulases and additional lignocellulosic enzymes may prove a determinant parameter for development of state-of-the-art designer cellulosomes for their employment in the conversion of cellulosic biomass to soluble sugars.Graphical abstractConversion of conventional designer cellulosomes into thermophilic designer cellulosomes.

Metabolic Engineering of Fusarium oxysporum to Improve Its Ethanol-Producing Capability

Fusarium oxysporum is one of the few filamentous fungi capable of fermenting ethanol directly from plant cell wall biomass. It has the enzymatic toolbox necessary to break down biomass to its monosaccharides and, under anaerobic and microaerobic conditions, ferments them to ethanol. Although these traits could enable its use in consolidated processes and thus bypass some of the bottlenecks encountered in ethanol production from lignocellulosic material when Saccharomyces cerevisiae is used—namely its inability to degrade lignocellulose and to consume pentoses—two major disadvantages of F. oxysporum compared to the yeast—its low growth rate and low ethanol productivity—hinder the further development of this process. We had previously identified phosphoglucomutase and transaldolase, two major enzymes of glucose catabolism and the pentose phosphate pathway, as possible bottlenecks in the metabolism of the fungus and we had reported the effect of their constitutive production on the growth characteristics of the fungus. In this study, we investigated the effect of their constitutive production on ethanol productivity under anaerobic conditions. We report an increase in ethanol yield and a concomitant decrease in acetic acid production. Metabolomics analysis revealed that the genetic modifications applied did not simply accelerate the metabolic rate of the microorganism; they also affected the relative concentrations of the various metabolites suggesting an increased channeling toward the chorismate pathway, an activation of the γ-aminobutyric acid shunt, and an excess in NADPH regeneration.

Evaluation of Paecilomyces variotii potential in bioethanol production from lignocellulose through consolidated bioprocessing

The ascomycete Paecillomyces variotii was evaluated for the first time as a candidate species for the production of bioethanol from lignocellulose through consolidated bioprocessing (CBP) approaches. The examined strain (ATHUM 8891) revealed all the necessary phenotypic characteristics required for 2nd generation biofuel production. The fungus is able to efficiently ferment glucose and xylose to ethanol, with yields close to the theoretical maximum. Nitrogen supplementation greatly affected ethanol production with nitrate-nitrogen presenting the best results. Notably, ethanol yield on xylose fermentation was higher than that of glucose, while in co-fermentation of glucose-xylose mixtures no distinguished diauxic behavior was observed. Furthermore, the fungus seems to possess the necessary enzyme factory for the degradation of lignocellulosic biomass, as it was able to grow and produce ethanol on common agro-industrial derivatives. Overall, the results of our study indicate that P. variotii is a new and possibly powerful candidate for CBP applications.

Constitutive homologous expression of phosphoglucomutase and transaldolase increases the metabolic flux of Fusarium oxysporum

BACKGROUND

Fusarium oxysporum is among the few filamentous fungi that have been reported of being able to directly ferment biomass to ethanol in a consolidated bioprocess. Understanding its metabolic pathways and their limitations can provide some insights on the genetic modifications required to enhance its growth and subsequent fermentation capability. In this study, we investigated the hypothesis reported previously that phosphoglucomutase and transaldolase are metabolic bottlenecks in the glycolysis and pentose phosphate pathway of the F. oxysporum metabolism.

RESULTS

Both enzymes were homologously overexpressed in F. oxysporum F3 using the gpdA promoter of Aspergillus nidulans for constitutive expression. Transformants were screened for their phosphoglucomutase and transaldolase genes expression levels with northern blot. The selected transformant exhibited high mRNA levels for both genes, as well as higher specific activities of the corresponding enzymes, compared to the wild type. It also displayed more than 20 and 15% higher specific growth rate upon aerobic growth on glucose and xylose, respectively, as carbon sources and 30% higher biomass to xylose yield. The determination of the relative intracellular amino and non-amino organic acid concentrations at the end of growth on glucose revealed higher abundance of most determined metabolites between 1.5- and 3-times in the recombinant strain compared to the wild type. Lower abundance of the determined metabolites of the Krebs cycle and an 68-fold more glutamate were observed at the end of the cultivation, when xylose was used as carbon source.

CONCLUSIONS

Homologous overexpression of phosphoglucomutase and transaldolase in F. oxysporum was shown to enhance the growth characteristics of the strain in both xylose and glucose in aerobic conditions. The intracellular metabolites profile indicated how the changes in the metabolome could have resulted in the observed growth characteristics.

Greek indigenous streptomycetes as biocontrol agents against the soil-borne fungal plant pathogen Rhizoctonia solani

AIMS

To examine the biocontrol potential of multiactive Greek indigenous Streptomyces isolates carrying antifungal activity against Rhizoctonia solani that causes damping-off symptoms on beans.

METHODS AND RESULTS

A total of 605 Streptomyces isolates originated from 12 diverse Greek habitats were screened for antifungal activity against R. solani DSM843. Almost one-third of the isolates proved to be antagonistic against the fungus. From the above isolates, six were selected due to their higher antifungal activity, identified by analysing their 16S rRNA gene sequence and studied further. The obtained data showed the following: firstly, the isolates ACTA1383 and ACTA1557 exhibited the highest antagonistic activity, and therefore, they were selected for in vivo experiments using bean seeds as target; secondly, in solid and liquid culture experiments under optimum antagonistic conditions, the medium extracts from the isolates OL80, ACTA1523, ACTA1551 and ACTA1522 suppressed the growth of the fungal mycelium, while extracts from ACTA 1383 and ACTA1557 did not show any activity.

CONCLUSIONS

These results corresponded important indications for the utility of two Greek indigenous Streptomyces isolates (ACTA1557 and ACTA1383) for the protection of the bean crops from R. solani damping-off symptoms, while four of them (isolates OL80, ACTA1523, ACTA1551 and ACTA1522) seem to be promising producers of antifungal metabolites.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first study on the biocontrol of R. solani using multiactive Streptomyces isolates originated from ecophysiologically special Greek habitats. Our study provides basic information to further explore managing strategies to control this critical disease.

Xanthan production by Xanthomonas campestris using whey permeate medium

Xanthan gum is a polysaccharide that is widely used as stabilizer and thickener with many industrial applications in food industry. Our aim was to estimate the ability of Xanthomonas campestris ATCC 13951 for the production of xanthan gum by using whey as a growth medium, a by-product of dairy industry. X. campestris ATCC 13951 has been studied in batch cultures using a complex medium for the determination of the optimal concentration of glucose, galactose and lactose. In addition, whey was used under various treatment procedures (de-proteinated, partially hydrolyzed by β-lactamase and partially hydrolyzed and de-proteinated) as culture medium, to study the production of xanthan in a 2 l bioreactor with constant stirring and aeration. A production of 28 g/l was obtained when partially hydrolysed β-lactamase was used, which proved to be one of the highest xanthan gum production reported so far. At the same time, an effort has been made for the control and selection of the most appropriate procedure for the preservation of the strain and its use as inoculant in batch cultures, without loss of its viability and its capability of xanthan gum production. The pre-treatment of whey (whey permeate medium hydrolyzed, WPH) was very important for the production of xanthan by the strain X. campestris ATCC 13951 during batch culture conditions in a 2 l bioreactor. Preservation methods such as lyophilization, cryopreservation at various glycerol solution and temperatures have been examined. The results indicated that the best preservation method for the producing strain X. campestris ATCC 13951 was the lyophilization. Taking into account that whey permeate is a low cost by-product of the dairy industry, the production of xanthan achieved under the studied conditions was considered very promising for industrial application.

The mode of lymphoblastoid cell death in response to gas phase cigarette smoke is dose-dependent

BACKGROUND

Cigarette smoke (CS) is the main cause in the development of chronic obstructive pulmonary disease (COPD), the pathogenesis of which is related to an extended inflammatory response. In this study, we investigated the effect of low and high doses of gas phase cigarette smoke (GPS) on cultured lymphocyte progenitor cells, using techniques to assess cell viability and to elucidate whether cells die of apoptosis or necrosis upon exposure to different doses of GPS.

METHODS

In our approach we utilised a newly-established system of exposure of cells to GPS that is highly controlled, accurately reproducible and simulates CS dosage and kinetics that take place in the smokers' lung. This system was used to study the mode of cell death upon exposure to GPS in conjunction with a range of techniques widely used for cell death studies such as Annexin V staining, activation of caspase -3, cytoplasmic release of cytochrome C, loss of mitochondrial membrane potential and DNA fragmentation.

RESULTS

Low doses of GPS induced specific apoptotic indexes in CCRF-CEM cells. Specifically, cytochrome C release and cleaved caspase-3 were detected by immunofluorescence, upon treatment with 1-3 puffs GPS. At 4 h post-exposure, caspase-3 activation was observed in western blot analysis, showing a decreasing pattern as GPS doses increased. Concomitant with this behaviour, a dose-dependent change in Delta psi m depolarization was monitored by flow cytometry 2 h post-exposure, while at 4 h Delta psi m collapse was observed at the higher doses, indicative of a shift to a necrotic demise. A reduction in DNA fragmentation events produced by 5 puffs GPS as compared to those provoked by 3 puffs GPS, also pointed towards a necrotic response at the higher dose of GPS.

CONCLUSION

Collectively, our results support that at low doses gas phase cigarette smoke induces apoptosis in cultured T-lymphocytes, whereas at high doses GPS leads to necrotic death, by-passing the characteristic stage of caspase-3 activation and, thus, the apoptotic route.

Cell bound and extracellular glucose oxidases from Aspergillus niger BTL: evidence for a secondary glycosylation mechanism

Two glucose oxidase (GOX) isoforms where purified to electrophoretic homogeneity from the mycelium extract (GOXI) and the extracellular medium (GOXII) of Aspergillus niger BTL cultures. Both enzymes were found to be homodimers with nonreduced molecular masses of 148 and 159 kDa and pI values of 3.7 and 3.6 for GOXI and GOXII, respectively. The substrate specificity and the kinetic characteristics of the two GOX forms, as expressed through their apparent K m values on glucose, as well as pH and T activity optima, were almost identical. The only structural difference between the two enzymes was in their degrees of glycosylation, which were determined equal to 14.1 and 20.8% (w/w) of their molecular masses for GOXI and GOXII, respectively. The above difference in the carbohydrate content between the two enzymes seems to influence their pH and thermal stabilities. GOXII proved to be more stable than GOXI at pH values 2.5, 3.0, 8.0, and 9.0. Half-lives of GOXI at pH 3.0 and 8.0 were 8.9 and 17.5 h, respectively, whereas the corresponding values for GOXII were 13.5 and 28.1 h. As far as the thermal stability is concerned, GOXII was also more thermostable than GOXI as judged by the deactivation constants determined at various temperatures. More specifically, the half-lives of GOXI and GOXII, at 45 degrees C, were 12 and 49 h, respectively. These results suggest A. niger BTL probably possesses a secondary glycosylation mechanism that increases the stability of the excreted GOX.

Cellulose, hemicelluloses, lignin and ash content of some organic materials and their suitability for use as paper pulp supplements

Freshwater algal biomass and orange and lemon peels were assessed as tissue paper pulp supplements. Cellulose and hemicellulose contents of algal biomass were 7.1% and 16.3%, respectively, whereas for citrus peels cellulose content ranged from 12.7% to 13.6% and hemicellulose from 5.3% to 6.1%. For all materials, lignin and ash content was 2% or lower, rendering them suitable for use as paper pulp supplements. The addition of algal biomass to paper pulp increased its mechanical strength significantly. However, brightness was adversely affected by chlorophyll. The addition of citrus peels in paper pulp had no effect on breaking length, increased bursting strength and decreased tearing resistance. Brightness was negatively affected at proportions of 10%, because citrus peel particles behave as coloured pigments. The cost of both materials is about 45% lower than that of conventional pulp, resulting in a 0.9-4.5% reduction in final paper price upon their addition to the pulp.

Differential physiological and developmental expression of the UapA and AzgA purine transporters in Aspergillus nidulans

In this article we study the cellular expression of UapA and AzgA, the two major purine transporters of Aspergillus nidulans, by constructing strains expressing, from their native promoters, fully functional fluorescent (UapA-sGFP, AzgA-sGFP) or immunological (UapA-His) chimeric transporters. Epifluorescence microscopy and immunodetection showed that under different physiological conditions and during Aspergillus development: (i) UapA and AzgA expression in the plasma membrane becomes evident early during germination and remains at a significant basal level in mycelium, (ii) Neither of the two transporters is expressed in the stalk, the vesicle, the phialides and the conidiospores, but surprisingly, UapA is specifically and strongly expressed in the periphery of metulae, (iii) Both transporters are expressed in ascogenous hyphae and in hülle cells but not in cleistothecia or ascospores, (iv) Purine induction leads to approximately 4-fold increase in UapA and AzgA protein content in mycelium, compatible with an analogous increase at the transcriptional level, (v) Ammonium leads to removal of UapA, but not of AzgA, from the plasma membrane by sorting of the protein to the vacuole.

Analysis of the gas phase of cigarette smoke by gas chromatography coupled with UV-diode array detection

A gas chromatography method, coupled with diode array photometric spectral detection in the ultraviolet region (167-330 nm), was developed for the analysis of the gas phase of cigarette smoke. The method enabled us to identify more than 20 volatiles present in the vapor phase of cigarette smoke. In that way, all major volatile organic compounds (including aldehydes, conjugated dienes, ketones, sulfides, furans, and single-ring aromatics), as well as nitric oxide (NO) and hydrogen sulfide (H(2)S), can be analyzed in a straightforward manner through a single chromatographic run of <50-min duration. The method can easily be applied by the introduction of a small volume of the gas-phase stream into the GC injection loop directly through the smoking apparatus exhaust circuit, thus providing an excellent alternative to available methods, which usually require extraction or concentration steps prior to any chromatographic analysis. Furthermore, all problems concerning aging of the gas phase are eliminated. Twelve compounds (including NO) were chosen for quantification through the use of appropriate calibration standards. Comparison of the vapor phase yields of these compounds for the reference cigarette Kentucky 1R4F with already reported data indicates that this method is very reliable as far as accuracy and reproducibility of the results are concerned. Finally, the proposed methodology was used to compare the concentration of these cigarette smoke gas-phase constituents among individual puffs.

A novel lipolytic activity of Rhodotorula glutinis cells: production, partial characterization and application in the synthesis of esters

Cell-bound lipase activity (10 pNPL units/g dry cell weight) was released when the yeast Rhodotorula glutinis was cultured in a 7-l stirred tank fermentor using palm-oil as the sole carbon source. The enzyme showed relative specificity towards medium chain organic acids since the apparent K(m) values for pNPB (p-NitroPhenyl-Butyrate) and pNPL (p-NitroPhenyl-Laurate) were equal to 2.7 and 0.7 mM, respectively. In addition, 80% of this activity could be detected on the surface of the cells. The cell-bound nature of the enzyme increased its thermal stability showing half-life times of 200 and 60 min at 50 and 60 degrees C, respectively, as well as good stability in organic solvents. Freeze-dried cell preparations were successfully used to catalyze the synthesis of fatty acid esters of butanol and heptanol in nearly anhydrous organic solvents. A conversion of 60-62% was obtained upon esterification of palmitic or oleic acid with butanol, within 96 h. The enzyme preparation was used in four consecutive batch reactions with only 10% loss of activity.

Biodegradation of phenol by acclimatized Pseudomonas putida cells using glucose as an added growth substrate

Biodegradation of phenol, a pollutant derived from many industrial processes, was achieved through acclimatized Pseudomonas putida cells. The strategy to overcome the inhibitory effect of phenol on microbial growth involved the addition of glucose, a conventional carbon source. A factorial experimental design was employed in order to optimize the initial phenol and glucose concentrations. The optimum conditions found were applied in 2-lt bioreactors. The development of acclimatized cells and the use of glucose as an added growth substrate resulted in a significant phenol degradation rate of 60.7 mg L(-1) h(-1) with a complete removal of 1200 mg L(-1) phenol.

Study of the mechanisms of cigarette smoke gas phase cytotoxicity

BACKGROUND

The cytotoxicity of cigarette smoke (CS) in humans is well-documented, but the mechanism behind CS toxicity and carcinogenicity remains unknown. We are interested in the toxicological effects of CS gas phase and the biological mechanisms of its action.

MATERIALS AND METHODS

Gas phase CS cytotoxicity was measured by Wst-1 and LDH assays, in cultured cells. The mechanism of cell death was investigated by flow cytometric analysis using Annexin V and PI staining. Gas phase CS-induced oxidative damage was evaluated by estimating cellular glutathione (GSH) levels. Protein modifications (nitration of tyrosines) induced by gas phase CS and activation of key signalling proteins (Mitogen-activated protein kinase, MAPK) were detected by immunoblotting.

RESULTS

The cytotoxicity of gas phase CS was found to be dose-dependent. The mechanism of cell death was found to be both apoptotic and necrotic depending on the concentrations used. Exposure to gas phase CS resulted in depletion of cellular GSH levels, increased nitrotyrosine immunoreactivity and phosphorylation of p44/42 MAPK proteins.

CONCLUSION

These results suggest that the CS gas phase alone contributes significantly to the deleterious effects of CS in cellular systems.

The cytotoxic effect of volatile organic compounds of the gas phase of cigarette smoke on lung epithelial cells

Health effects of cigarette smoke (CS) in humans are well known from both clinical and epidemiological studies. However, the mechanism behind CS toxicity and carcinogenicity remains mainly unknown. Recent studies have pointed to the major importance of the gas phase of CS in generating its cytotoxic effects. In the current study, an exposure system capable of introducing the gas phase of mainstream cigarette smoke deprived of its volatile organic constituents (VOCs) was used to study the role of the nonorganic components of the gas phase on the cytotoxicity of smoke to monolayer cultures of mouse lung epithelial cells. Cell viability was measured by Wst-1 and the lactate dehydrogenase (LDH) assays. In cells treated with increasing doses of mainstream cigarette smoke gas phase (one to nine puffs), a dose-dependent increase in cytotoxicity was observed (one puff, 95% viability; nine puffs, 40% viability). Cell viability of cultures exposed to gas phase with only the nonorganic components was found to be equivalent to control, unexposed cultures, indicating that removal of VOCs resulted in almost eliminating the cytotoxic ability of the gas phase of CS. Furthermore, the removal of VOCs seems to reduce the effects of protein tyrosine nitration mediated through the gas phase constituents. The results obtained suggest the important and decisive role of VOCs in inducing cytotoxic effects.

Purification and characterization of an extracellular alpha-L-arabinofuranosidase from Fusarium oxysporum

An alpha-L-arabinofuranosidase from Fusarium oxysporum F3 was purified to homogeneity by a two-step ion exchange intercalated by a gel filtration chromatography. The enzyme had a molecular mass of 66 kDa and was optimally active at pH 6.0 and 60 degrees C. It hydrolyzed aryl alpha-L-arabinofuranosides and cleaved arabinosyl side chains from arabinoxylan and arabinan. There was a marked synergistic effect between the alpha-L-arabinofuranosidase and an endo-(1-->4)-beta-D-xylanase produced by F. oxysporum in the extensive hydrolysis of arabinoxylan.

Purification and mode of action of an alkali-resistant endo-1, 4-beta-glucanase from Bacillus pumilus

Alkaline endo-1,4-beta-d-glucanase was secreted by Bacillus pumilus grown in submerged culture on a combination of oat spelt xylan and corn starch as carbon sources. The enzyme was purified to homogeneity by Sephacryl S-200 and Q-Sepharose column chromatography. The protein corresponded to molecular mass and pI values of 67 kDa and 3.7, respectively. The enzyme was optimally active at pH 7.0-8.0 and 60 degrees C and retained 50% of its optimum activity at pH 12. The most notable characteristic of the endoglucanase was its high stability up to pH 12 for 20 h at 30 degrees C. The enzyme hydrolyzed carboxymethylcellulose (CMC) and cello-oligosaccharides but was inactive on cellobiose, cellotriose, Avicel, xylan, 4-nitrophenyl-beta-d-glucoside, 4-nitrophenyl-beta-d-cellobioside, and 4-nitrophenyl-beta-d-xyloside. Analysis of reaction mixtures by HPLC revealed that the enzyme produced almost exclusively cellotriose when acted on CMC and appeared to hydrolyze cello-oligosaccharides by successively releasing cellotriose. The use of 4-methylumbelliferyl cello-oligosaccharides and the determination of bond cleavage frequency revealed that the enzyme preferentially hydrolyzed the third glycosidic bond adjacent to the glycon. The enzyme mediated a decrease in the viscosity of CMC associated with a release of only small amounts of reducing sugar. The enzyme activity was not inhibited by metal ions, surfactants, and chelating agents used as components of laundry detergents.

An efficient and optimized purification procedure for the superoxide dismutase from Aspergillus niger. Partial characterization of the purified enzyme

Cu,Zn-superoxide dismutase was isolated from Aspergillus niger mycelia, harvested at the mid-logarithmic growth phase. The purification scheme aimed at the optimization of the ethanol/chloroform extraction (Tsuchihashi extraction) through response surface methodology. Upon optimum extraction conditions, it was possible to obtain electrophoretically pure enzyme preparations, by the application of one step anion exchange chromatography. The enzyme yield of this simple purification procedure was above 75% while the specific activity of the final preparation was among the highest reported for eucariotic microorganisms. The purified enzyme exhibited similar physicochemical characteristics with other Aspergillus sp. superoxide dismutases revealing an apparent tetrameric structure with a subunit molecular weight of 19 kDa, and a pl of 5.95.

A new glucose oxidase from Aspergillus niger: characterization and regulation studies of enzyme and gene

A new glucose oxidase from Aspergillus niger was isolated and characterized. The enzyme showed different kinetic and stability characteristics when compared to a commercially available batch of A. niger glucose oxidase. The gene encoding the new glucose oxidase was isolated and DNA sequence analysis of the coding region showed 80% identity to the sequence of a glucose oxidase gene previously published. However, the similarity of the non-coding sequences up- and downstream of the open reading frame was much less, showing only 66% and 50% identity respectively. Despite the low degree of similarity between the promotor region of the new gene and the previously published one, the new glucose oxidase was likewise induced by calcium carbonate. In addition, we showed that this induction occurred on the transcriptional level. Observations concerning the effect of gluconolactone and the levels of glucose-6 phosphate isomerase upon calcium carbonate induction suggested that the enhancement of glucose oxidase biosynthesis by calcium carbonate was accompanied by a metabolic shift from glycolysis to the pentose phosphate pathway.