Comparing the Healing Abilities of Fluorapatite and Hydroxyapatite Ceramics in Regenerating Bone Tissue: An In Vivo Study

Some reports in the literature show the advantages of fluoride-containing apatite ceramics over hydroxyapatite (HAP), at least in some aspects. While HAP has been used extensively in the treatment of bone defects, fluoridated apatite has hardly been tested in vivo. In order to verify the biological properties of fluoride-doped apatite and to assess its therapeutic potential, we synthesized fluorapatite (FAP) and applied it as a filling in bone defects of experimental animals (rabbits). The treatment effects were evaluated on extracted bones after 3 and 6 months from implantation using peripheral quantitative computed tomography (pQCT), dual-energy X-ray absorptiometry (DXA), radiography (X-ray) and histological staining. The study proved the integration between FAP and the bone tissue, thus indicating its stimulating effect on new bone formation and mineralization. The results achieved after 3 months of treatment were difficult to interpret unequivocally and suggested the transient delay in FAP integration of bone in comparison with HAP. The reasons for this phenomenon are unclear. Most likely, these differences between FAP and HAP resulted mainly from the different porosities, densities and ionic reactivity of the ceramics, which in our opinion affected their solubility, integration and degree of bone tissue resorption. However, it was shown that 6 months after implantation, similar level of bone defect regeneration was achieved for both FAP and HAP. In this article, we present our hypothesis concerning the basis of this phenomenon.

Do Curdlan Hydrogels Improved with Bioactive Compounds from Hop Exhibit Beneficial Properties for Skin Wound Healing?

Chronic wounds, among others, are mainly characterized by prolonged inflammation associated with the overproduction of reactive oxygen species and pro-inflammatory cytokines by immune cells. As a consequence, this phenomenon hinders or even precludes the regeneration process. It is known that biomaterials composed of biopolymers can significantly promote the process of wound healing and regeneration. The aim of this study was to establish whether curdlan-based biomaterials modified with hop compounds can be considered as promising candidates for the promotion of skin wound healing. The resultant biomaterials were subjected to an evaluation of their structural, physicochemical, and biological in vitro and in vivo properties. The conducted physicochemical analyses confirmed the incorporation of bioactive compounds (crude extract or xanthohumol) into the curdlan matrix. It was found that the curdlan-based biomaterials improved with low concentrations of hop compounds possessing satisfactory hydrophilicity, wettability, porosity, and absorption capacities. In vitro, tests showed that these biomaterials were non-cytotoxic, did not inhibit the proliferation of skin fibroblasts, and had the ability to inhibit the production of pro-inflammatory interleukin-6 by human macrophages stimulated with lipopolysaccharide. Moreover, in vivo studies showed that these biomaterials were biocompatible and could promote the regeneration process after injury (study on Danio rerio larvae model). Thus, it is worth emphasizing that this is the first paper demonstrating that a biomaterial based on a natural biopolymer (curdlan) improved with hop compounds may have biomedical potential, especially in the context of skin wound healing and regeneration.

Could Curdlan/Whey Protein Isolate/Hydroxyapatite Biomaterials Be Considered as Promising Bone Scaffolds?-Fabrication, Characterization, and Evaluation of Cytocompatibility towards Osteoblast Cells In Vitro

The number of bone fractures and cracks requiring surgical interventions increases every year; hence, there is a huge need to develop new potential bone scaffolds for bone regeneration. The goal of this study was to gain knowledge about the basic properties of novel curdlan/whey protein isolate/hydroxyapatite biomaterials in the context of their use in bone tissue engineering. The purpose of this research was also to determine whether the concentration of whey protein isolate in scaffolds has an influence on their properties. Thus, two biomaterials differing in the concentration of whey protein isolate (i.e., 25 wt.% and 35 wt.%; hereafter called Cur_WPI25_HAp and Cur_WPI35_HAp, respectively) were fabricated and subjected to evaluation of porosity, mechanical properties, swelling ability, protein release capacity, enzymatic biodegradability, bioactivity, and cytocompatibility towards osteoblasts in vitro. It was found that both biomaterials fulfilled a number of requirements for bone scaffolds, as they demonstrated limited swelling and the ability to undergo controllable enzymatic biodegradation, to form apatite layers on their surfaces and to support the viability, growth, proliferation, and differentiation of osteoblasts. On the other hand, the biomaterials were characterized by low open porosity, which may hinder the penetration of cells though their structure. Moreover, they had low mechanical properties compared to natural bone, which limits their use to filling of bone defects in non-load bearing implantation areas, e.g., in the craniofacial area, but then they will be additionally supported by application of mechanically strong materials such as titanium plates. Thus, this preliminary in vitro research indicates that biomaterials composed of curdlan, whey protein isolate, and hydroxyapatite seem promising for bone tissue engineering applications, but their porosity and mechanical properties should be improved. This will be the subject of our further work.

Novel C60 Fullerenol-Gentamicin Conjugate–Physicochemical Characterization and Evaluation of Antibacterial and Cytotoxic Properties

This study aimed to develop, characterize, and evaluate antibacterial and cytotoxic properties of novel fullerene derivative composed of C₆₀ fullerenol and standard aminoglycoside antibiotic–gentamicin (C₆₀ fullerenol-gentamicin conjugate). The successful introduction of gentamicin to fullerenol was confirmed by X-ray photoelectron spectroscopy which together with thermogravimetric and spectroscopic analysis revealing the formula of the composition as C₆₀(OH)₁₂(GLYMO)₁₁(Gentamicin)_0.8. The dynamic light scattering (DLS) revealed that conjugate possessed ability to form agglomerates in water (size around 115 nm), while Zeta potential measurements demonstrated that such agglomerates possessed neutral character. In vitro biological assays indicated that obtained C₆₀ fullerenol-gentamicin conjugate possessed the same antibacterial activity as standard gentamicin against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, and Escherichia coli, which proves that combination of fullerenol with gentamicin does not cause the loss of antibacterial activity of antibiotic. Moreover, cytotoxicity assessment demonstrated that obtained fullerenol-gentamicin derivative did not decrease viability of normal human fibroblasts (model eukaryotic cells) compared to control fibroblasts. Thus, taking into account all of the results, it can be stated that this research presents effective method to fabricate C₆₀ fullerenol-gentamicin conjugate and proves that such derivative possesses desired antibacterial properties without unfavorable cytotoxic effects towards eukaryotic cells in vitro. These promising preliminary results indicate that obtained C₆₀ fullerenol-gentamicin conjugate could have biomedical potential. It may be presumed that obtained fullerenol may be used as an effective carrier for antibiotic, and developed fullerenol-gentamicin conjugate may be apply locally (i.e., at the wound site). Moreover, in future we will evaluate possibility of its applications in inter alia tissue engineering, namely as a component of wound dressings and implantable biomaterials.

Biomimetic biphasic curdlan-based scaffold for osteochondral tissue engineering applications - Characterization and preliminary evaluation of mesenchymal stem cell response in vitro

Osteochondral defects remain a huge problem in medicine today. Biomimetic bi- or multi-phasic scaffolds constitute a very promising alternative to osteochondral autografts and allografts. In this study, a new curdlan-based scaffold was designed for osteochondral tissue engineering applications. To achieve biomimetic properties, it was enriched with a protein component - whey protein isolate as well as a ceramic ingredient - hydroxyapatite granules. The scaffold was fabricated via a simple and cost-efficient method, which represents a significant advantage. Importantly, this technique allowed generation of a scaffold with two distinct, but integrated phases. Scanning electron microcopy and optical profilometry observations demonstrated that phases of biomaterial possessed different structural properties. The top layer of the biomaterial (mimicking the cartilage) was smoother than the bottom one (mimicking the subchondral bone), which is beneficial from a biological point of view because unlike bone, cartilage is a smooth tissue. Moreover, mechanical testing showed that the top layer of the biomaterial had mechanical properties close to those of natural cartilage. Although the mechanical properties of the bottom layer of scaffold were lower than those of the subchondral bone, it was still higher than in many analogous systems. Most importantly, cell culture experiments indicated that the biomaterial possessed high cytocompatibility towards adipose tissue-derived mesenchymal stem cells and bone marrow-derived mesenchymal stem cells in vitro. Both phases of the scaffold enhanced cell adhesion, proliferation, and chondrogenic differentiation of stem cells (revealing its chondroinductive properties in vitro) as well as osteogenic differentiation of these cells (revealing its osteoinductive properties in vitro). Given all features of the novel curdlan-based scaffold, it is worth noting that it may be considered as promising candidate for osteochondral tissue engineering applications.

Freeze-Dried Curdlan/Whey Protein Isolate-Based Biomaterial as Promising Scaffold for Matrix-Associated Autologous Chondrocyte Transplantation-A Pilot In-Vitro Study

The purpose of this pilot study was to establish whether a novel freeze-dried curdlan/whey protein isolate-based biomaterial may be taken into consideration as a potential scaffold for matrix-associated autologous chondrocyte transplantation. For this reason, this biomaterial was initially characterized by the visualization of its micro- and macrostructures as well as evaluation of its mechanical stability, and its ability to undergo enzymatic degradation in vitro. Subsequently, the cytocompatibility of the biomaterial towards human chondrocytes (isolated from an orthopaedic patient) was assessed. It was demonstrated that the novel freeze-dried curdlan/whey protein isolate-based biomaterial possessed a porous structure and a Young's modulus close to those of the superficial and middle zones of cartilage. It also exhibited controllable degradability in collagenase II solution over nine weeks. Most importantly, this biomaterial supported the viability and proliferation of human chondrocytes, which maintained their characteristic phenotype. Moreover, quantitative reverse transcription PCR analysis and confocal microscope observations revealed that the biomaterial may protect chondrocytes from dedifferentiation towards fibroblast-like cells during 12-day culture. Thus, in conclusion, this pilot study demonstrated that novel freeze-dried curdlan/whey protein isolate-based biomaterial may be considered as a potential scaffold for matrix-associated autologous chondrocyte transplantation.

Highly Porous Fluorapatite/β-1,3-Glucan Composite for Bone Tissue Regeneration: Characterization and In-Vitro Assessment of Biomedical Potential

A novel fluorapatite/glucan composite (“FAP/glucan”) was developed for the treatment of bone defects. Due to the presence of polysaccharide polymer (β-1,3-glucan), the composite is highly flexible and thus very convenient for surgery. Its physicochemical and microstructural properties were evaluated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), mercury intrusion, mechanical testing and compared with the reference material, which was a hydroxyapatite/glucan composite (“HAP/glucan”) with hydroxyapatite granules (HAP) instead of FAP. It was found that FAP/glucan has a higher density and lower porosity than the reference material. The correlation between the Young’s modulus and the compressive strength between the materials is different in a dry and wet state. Bioactivity assessment showed a lower ability to form apatite and lower uptake of apatite-forming ions from the simulated body fluid by FAP/glucan material in comparison to the reference material. Moreover, FAP/glucan was determined to be of optimal fluoride release capacity for osteoblasts growth requirements. The results of cell culture experiments showed that fluoride-containing biomaterial was non-toxic, enhanced the synthesis of osteocalcin and stimulated the adhesion of osteogenic cells.

Curdlan-Based Hydrogels for Potential Application as Dressings for Promotion of Skin Wound Healing-Preliminary In Vitro Studies

The aim of this work was to establish whether novel curdlan-based hydrogels enriched with Ca²⁺ ions may be considered as potential candidates for dressings, for the acceleration of skin wound healing. Firstly, biomaterials were allocated for evaluation of structural and mechanical properties. Subsequently, the ability of hydrogels to absorb simulated wound fluid and water vapor permeability, as well their capacity to release calcium ions, was evaluated. The biocompatibility of biomaterials was assessed using normal human skin fibroblasts. Importantly, the main features of the obtained curdlan-based hydrogels were compared with those of KALTOSTAT^® (a commercial calcium sodium alginate wound dressing). The obtained results showed that curdlan-based biomaterials possessed a mesoporous structure (pore diameter ranged from 14–48 nm) and exhibited a good ability to absorb simulated wound fluid (swelling ratio close to 974–1229%). Moreover, in a wet state, they enabled proper water vapor transmission rate (>2000 g/m²/day), thanks to their hydrogel structure. Finally, it was found that biomaterial composed of 11 wt.% of curdlan (Cur_11%) possessed the most desirable biological properties in vitro. It released a beneficial amount of calcium ions to the aqueous environment (approximately 6.12 mM), which significantly enhanced fibroblast viability and proliferation. Taking into account the beneficial properties of Cur_11% biomaterial, it seems justified to subject it to more advanced cell culture experiments in vitro and to in vivo studies in order to determine its precise influence on skin wound healing.

Physicochemical changes of the chitosan/β-1,3-glucan/hydroxyapatite biocomposite caused by mesenchymal stem cells cultured on its surface in vitro

In the present study structural characteristics and physicochemical properties of tri-component biomaterial (consisting of chitosan, β-1,3-glucan and hydroxyapatite) seeded with mesenchymal stem cells were investigated with the use of diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). In this study we use non-conventional approach of DRIFT spectroscopy for investigating biomaterial changes under simulated physiological conditions. Particular cell-induced changes were intended to be properly evaluated with analytical methods. Abovementioned techniques allowed to precisely assess the changes on the surface of the biomaterial caused by two kinds of stem cells (ADSCs - Adipose tissue-Derived Stem Cells and BMDSCs - Bone Marrow-Derived Stem Cells) cultured directly on the surface of bioceramic-based biomaterial. The bioactivity and biocompatibility of designed bone biomaterial were demonstrated and hence it seems to be a promising scaffold used in tissue engineering. Designed chitosan, β-1,3-glucan, and hydroxyapatite biomaterial was proven to be non-toxic, surgically handy with cellular compatibility. The obtained results are interesting and promising in terms of spectroscopic methods suitability for qualitative assessment of material-cell interactions.

The Chemical and Biological Properties of Nanohydroxyapatite Coatings with Antibacterial Nanometals, Obtained in the Electrophoretic Process on the Ti13Zr13Nb Alloy

The risk of an early inflammation after implantation surgery of titanium implants has caused the development of different antimicrobial measures. The present research is aimed at characterizing the effects of nanosilver and nanocopper dispersed in the nanohydroxyapatite coatings, deposited on the Ti13Zr13Nb alloy, and on the chemical and biological properties of the coatings. The one-stage deposition process was performed by the electrophoretic method at different contents of nanomaterials in suspension. The surface topography of the coatings was examined with scanning electron microscopy. The wettability was expressed as the water contact angle. The corrosion behavior was characterized by the potentiodynamic technique. The release rate of copper and silver into the simulated body fluid was investigated by atomic absorption spectrometry. The antibacterial efficiency was evaluated as the survivability and adhesion of the bacteria and the growth of the biofilm. The cytotoxicity was assessed for osteoblasts. The results demonstrate that silver and copper increase the corrosion resistance and hydrophilicity. Both elements together effectively kill bacteria and inhibit biofilm growth but appear to be toxic for osteoblasts. The obtained results show that the nanohydroxyapatite coatings doped with nanosilver and nanocopper in a one-stage electrophoretic process can be valuable for antibacterial coatings.

Application of Raman Spectroscopic Imaging to Assess the Structural Changes at Cell-Scaffold Interface

Raman spectroscopic imaging and mapping were applied to characterise three-compound ceramic composite biomaterial consisting of chitosan, β-1,3-d-glucan (curdlan) and hydroxyapatite (HA) developed as a bone tissue engineering product (TEP). In this rapidly advancing domain of medical science, the urge for quick, reliable and specific method for products evaluation and tissue–implant interaction, in this case bone formation process, is constantly present. Two types of stem cells, adipose-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMDSCs), were cultured on composite surface. Raman spectroscopic imaging provided advantageous information on molecular differences and spatial distribution of compounds within and between the cell-seeded and untreated samples at a microscopic level. With the use of this, it was possible to confirm composite biocompatibility and bioactivity in vitro. Deposition of HA and changes in its crystallinity along with protein adsorption proved new bone tissue formation in both mesenchymal stem cell samples, where the cells proliferated, differentiated and produced biomineralised extracellular matrix (ECM). The usefulness of spectroscopic Raman imaging was confirmed in tissue engineering in terms of both the organic and inorganic components considering composite–cells interaction.

Catalytic enrichment of plasma with hydroxyl radicals in the aqueous phase at room temperature

Iron oxide on mesoporous silica gave a synergy with plasma jet for HO˙ radical production at neutral pH.

New Application of 1,2,4-Triazole Derivatives as Antitubercular Agents. Structure, In Vitro Screening and Docking Studies

A series of 1,2,4-triazole derivatives were synthesized and assigned as potential anti-tuberculosis substances. The molecular and crystal structures for the model compounds C1, C12, and C13 were determined using X-ray analysis. The X-ray investigation confirmed the synthesis pathway and the assumed molecular structures for analyzed 1,2,4-triazol-5-thione derivatives. The conformational preferences resulting from rotational degrees of freedom of the 1,2,4-triazole ring substituents were characterized. The lipophilicity (logP) and electronic parameters as the energy of frontier orbitals, dipole moments, NBO net charge distribution on the atoms, and electrostatic potential distribution for all structures were calculated at AM1 and DFT/B3LYP/6-311++G(d,p) level. The in vitro test was done against M. tuberculosis H37Ra, M. phlei, M. smegmatis, and M. timereck. The obtained results clearly confirmed the antituberculosis potential of compound C4, which turned out to be the most active against Mycobacterium H37Ra (MIC = 0.976 μg/mL), Mycobaterium pheli (MIC = 7.81 μg/mL) and Mycobacerium timereck (62.6 μg/mL). Satisfactory results were obtained with compounds C8, C11, C14 versus Myc. H37Ra, Myc. pheli, Myc. timereck (MIC = 31.25-62.5 μg/mL). The molecular docking studies were carried out for all investigated compounds using the Mycobacterium tuberculosis cytochrome P450 CYP121 enzyme as molecular a target connected with antimycobacterial activity.

Efficient non-contact heat generation on flexible, ternary hydroxyapatite/curdlan/nanomagnetite hybrids for temperature controlled processes

The ternary HAp/curdlan/nanomagnetite hybrids with ceramic and polymer phase incorporation of magnetite nanoparticles (MNPs) were fabricated to study their heating ability under action of the alternating magnetic field (AMF), 808 nm near infrared laser radiation (NIR) and their synergic stimulation. The energy conversion was evaluated in terms of the specific absorption rate (SAR) as a function of the MNPs concentration in composites and to estimate their potential in temperature-controlled regenerative processes and hyperthermia. Measurements were carried out on dry and Ringer's solution soaked composite materials in order to mimic in situ conditions. It was found that the MNPs release during prolonged experiment is limited and has no significant effect on energy conversion emphasizing stability of the hybrids. Incorporation of the MNPs in polymer phase of the hybrid can additionally limit particle leaking as well as plays a role as insulating layer for the heat dissipation lowering the risk of sample overheating. In general, it was shown that maximum temperature of hybrid can be achieved in a relatively short time of exposure to stimulating factors whereas its control can be done through optimization of experiment conditions. MNPs incorporation into the curdlan (polymer phase) lead to strengthening of the mechanical properties of the whole network.

Collagen maturity and mineralization in mesenchymal stem cells cultured on the hydroxyapatite-based bone scaffold analyzed by ATR-FTIR spectroscopic imaging

Modern bone tissue engineering is based on the use of implants in the form of biomaterials, which are used as scaffolds for osteoprogenitor or stem cells. The task of the scaffolds is to temporarily sustain the function, proliferation and differentiation of bone tissue to enable its regeneration. The aim of this work is to use the macro ATR-FTIR spectroscopic imaging for analysis of the ceramic-based biomaterial (chitosan/β-1,3-glucan/hydroxyapatite). Specifically, during long-term culture of mesenchymal cells derived from adipose tissue (ADSCs) and bone marrow (BMDSCs) on the surface of scaffold. Infrared spectroscopy allows the acquisition of information on both the organic and inorganic parts of the tested composite. This innovative spectroscopic approach proved to be very suitable for studying the formation of new bone tissue and ECM components, sample staining and demineralization are not required and consequently the approach is rapid and cost-effective. The novelty of this study focuses on the innovatory use of ATR-FTIR imaging to evaluate the molecular structure and maturity of collagen as well as mineral matrix formation and crystallization in the context of bone regenerative medicine. Our research has shown that the biomaterial investigated on this work facilitates the formation of valid bone ECM of the stem cells types studied, as a result of the synthesis of type I collagen and mineral content deposition. Nevertheless, ADSC cells have been proven to produce a greater amount of collagen with a lower content of helical secondary structures, at the same time showing a higher mineralization intensity compared to BMDSC cells. Considering the above results, it could be stated that the developed scaffold is a promising material for biomedical applications, including modification of bone implants to increase their biocompatibility.

Positive Effect of Cold Atmospheric Nitrogen Plasma on the Behavior of Mesenchymal Stem Cells Cultured on a Bone Scaffold Containing Iron Oxide-Loaded Silica Nanoparticles Catalyst

Low-temperature atmospheric pressure plasma was demonstrated to have an ability to generate different reactive oxygen and nitrogen species (RONS), showing wide biological actions. Within this study, mesoporous silica nanoparticles (NPs) and Fe_xO_y/NPs catalysts were produced and embedded in the polysaccharide matrix of chitosan/curdlan/hydroxyapatite biomaterial. Then, basic physicochemical and structural characterization of the NPs and biomaterials was performed. The primary aim of this work was to evaluate the impact of the combined action of cold nitrogen plasma and the materials produced on proliferation and osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells (ADSCs), which were seeded onto the bone scaffolds containing NPs or Fe_xO_y/NPs catalysts. Incorporation of catalysts into the structure of the biomaterial was expected to enhance the formation of plasma-induced RONS, thereby improving stem cell behavior. The results obtained clearly demonstrated that short-time (16s) exposure of ADSCs to nitrogen plasma accelerated proliferation of cells grown on the biomaterial containing Fe_xO_y/NPs catalysts and increased osteocalcin production by the cells cultured on the scaffold containing pure NPs. Plasma activation of Fe_xO_y/NPs-loaded biomaterial resulted in the formation of appropriate amounts of oxygen-based reactive species that had positive impact on stem cell proliferation and at the same time did not negatively affect their osteogenic differentiation. Therefore, plasma-activated Fe_xO_y/NPs-loaded biomaterial is characterized by improved biocompatibility and has great clinical potential to be used in regenerative medicine applications to improve bone healing process.

Fluorapatite ceramics for bone tissue regeneration: Synthesis, characterization and assessment of biomedical potential

Calcium phosphates, due to their similarity to the inorganic fraction of mineralized tissues, are of great importance in treatment of bone defects. In order to improve the biological activity of hydroxyapatite (HAP), its fluoride-substituted modification (FAP) was synthesized using the sol-gel method and calcined at three different temperatures in the range of 800-1200 °C. Physicochemical and biological properties were evaluated to indicate which material would support bone regeneration the best. X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS), and Fourier transform infrared spectroscopy (FTIR) revealed that fluoride ions were incorporated into the apatite lattice structure. In studies it was found that fluorapatite sintered at the highest temperature had the lowest porosity, no internal pores and the highest density. In vitro ion reactivity assessments showed that during the 28-day immersion of the samples in the simulated body fluid, the uptake of calcium and phosphorus ions was inversely correlated to the calcination temperature. All tested materials were non-toxic since the cytotoxicity MTT assay demonstrated that the viability of preosteoblast cells incubated with sample extracts was high. Fluorapatite sintered at 800 °C was determined to be of optimal porosity and fluoride release capacity and then used in cell proliferation studies. The results showed that it significantly shortened the doubling time and thus enhanced the proliferation of osteogenic cells, as compared to the fluoride solutions and control group. Therefore, this material is proposed for the use in orthopedic applications and bone tissue engineering.

Anti-Acne Action of Peptides Isolated from Burdock Root-Preliminary Studies and Pilot Testing

This work aimed to study the anti-bacterial, anti-biofilm and anti-oxidant potential effects of low molecular weight (LMW) peptides (Br-p) isolated from burdock (Arctium lappa L.) roots. We conducted a preliminary study to exclude or confirm the antibiotic activity of the LMW peptides fraction of this plant. Br-p were isolated using gel filtration and a 10 kDa cut-off membrane. The obtained peptides were identified by MALDI TOF/TOF. Antibacterial activity was tested against acne strains using diffusion tests, MIC and MBC. The fibroblast cytotoxicity of Br-p was tested, and the selectivity index (SI) value was determined. The fraction of 46 Br-p peptides isolated from burdock root with a molecular weight below 5000 Da and theoretic pI (isoelectric point) of 3.67-11.83 showed a narrow spectrum of activity against Gram-positive acne bacterial strains. One of the Br-p peptides assessed on MALDI RapidDeNovo was LRCDYGRFFASKSLYDPLKKRR cationic peptide. It was analogous to that contained in A. lappa protein, and theoretically it was matched as a peptide with antibiotic nature. Br-p did not show toxicity to fibroblasts in the tested concentration up to 10 mg/mL, obtaining CC50 10 mg/mL. The SI value for the tested Propionibacterium strains ranged from 160 to 320. Finally, an active dressing based on chitosan/alginate/genipin was prepared using freeze-drying. The formed dressing was evaluated for its anti-acne activity. To sum up: preliminary biological studies confirmed the anti-acne properties of the isolated peptide fraction from burdock root and pointed to the possibility of using it to create an active dressing on the skin.

Proteins and Peptides as Important Modifiers of the Polymer Scaffolds for Tissue Engineering Applications-A Review

Polymer scaffolds constitute a very interesting strategy for tissue engineering. Even though they are generally non-toxic, in some cases, they may not provide suitable support for cell adhesion, proliferation, and differentiation, which decelerates tissue regeneration. To improve biological properties, scaffolds are frequently enriched with bioactive molecules, inter alia extracellular matrix proteins, adhesive peptides, growth factors, hormones, and cytokines. Although there are many papers describing synthesis and properties of polymer scaffolds enriched with proteins or peptides, few reviews comprehensively summarize these bioactive molecules. Thus, this review presents the current knowledge about the most important proteins and peptides used for modification of polymer scaffolds for tissue engineering. This paper also describes the influence of addition of proteins and peptides on physicochemical, mechanical, and biological properties of polymer scaffolds. Moreover, this article sums up the major applications of some biodegradable natural and synthetic polymer scaffolds modified with proteins and peptides, which have been developed within the past five years.

Antimycobacterial Activity of Cinnamaldehyde in a Mycobacterium tuberculosis(H37Ra) Model

The purpose of the study was to evaluate the antimycobacterial activity and the possible action mode of cinnamon bark essential oil and its main constituent-cinnamaldehyde-against the Mycobacterium tuberculosis ATCC 25177 strain. Cinnamaldehyde was proved to be the main bioactive compound responsible for mycobacterial growth inhibition and bactericidal effects. The antimycobacterial activity of cinnamaldehyde was found to be comparable with that of ethambutol, one of the first-line anti-TB antibiotics. The selectivity index determined using cell culture studies in vitro showed a high biological potential of cinnamaldehyde. In M. tuberculosis cells exposed to cinnamaldehyde the cell membrane stress sensing and envelope preserving system are activated. Overexpression of clgR gene indicates a threat to the stability of the cell membrane and suggests a possible mechanism of action. No synergism was detected with the basic set of antibiotics used in tuberculosis treatment: ethambutol, isoniazid, streptomycin, rifampicin, and ciprofloxacin.

Do new N-substituted 3-amino-4-phenyl-5-oxo-pyrazolinecarboxamide derivatives exhibit antitubercular potential?

As a continuation of previous tests concerning new N-substituted 3-amino-4-phenyl-5-oxo-pyrazolinecarboxamide derivatives (R3, R4 and R8) of notable antibacterial activity, their antitubercular potential against different mycobacterial strains was estimated. Tests performed on virulent (reference and clinical) strains of Mycobacterium bovis and Mycobacterium tuberculosis revealed the highest therapeutic potential of R8 derivative: MIC within the range 7.8-15.6 μg/ml and TI (therapeutic index) within the range 46.5-93. Moreover, the synergistic interaction was found between R3, R4 and R8 derivatives and rifampicin, one of the front-line antitubercular drugs. R8/rifampicin mixture in concentrations effective in inhibition of Mycobacterium tuberculosis strain was non-cytotoxic against GMK cells, displaying cell viability approximately 88-97% when compared to control. Molecular docking study enabled to conclude that enoyl acyl carrier protein reductase (InhA) can be considered as a potential molecular target of tested pyrazole derivatives. Although further modifications of chemical structure of the investigated pyrazole derivatives is required, in order to increase their antitubercular efficacy and therapeutic safety, these compounds, in particular R8 compound, can be promising for the treatment of human and bovine tuberculosis.

Metal TiO2 Nanotube Layers for the Treatment of Dental Implant Infections

Titanium oxide nanotube layers with silver and zinc nanoparticles are attracting increasing attention in the design of bone and dental implants due to their antimicrobial potential and their ability to control host cell adhesion, growth, and differentiation. However, recent reports indicate that the etiology of dental infections is more complex than has been previously considered. Therefore, the antimicrobial potential of dental implants should be evaluated against at least several different microorganisms cooperating in human mouth colonization. In this study, Ag and Zn nanoparticles incorporated into titanium oxide nanotubular layers were studied with regard to how they affect Candida albicans, Candida parapsilosis, and Streptococcus mutans. Layers of titanium oxide nanotubes with an average diameter of 110 nm were fabricated by electrochemical anodization, annealed at 650 °C, and modified with approx. 5 wt % Ag or Zn nanoparticles. The surfaces were examined with the scanning electron microscopy-energy dispersive X-ray analysis, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy techniques and subjected to evaluation of microbial-killing and microbial adhesion-inhibiting potency. In a 1.5 h long adhesion test, the samples were found more effective toward yeast strains than toward S. mutans. In a release-killing test, the microorganisms were almost completely eliminated by the samples, either within 3 h of contact (for S. mutans) or 24 h of contact (for both yeast strains). Although further improvement is advisable, it seems that Ag and Zn nanoparticles incorporated into TiO₂ nanotubular surfaces provide a powerful tool for reducing the incidence of bone implant infections. Their high bidirectional activity (against both Candida species and S. mutans) makes the layers tested particularly promising for the design of dental implants.

Behavior of new hydroxyapatite/glucan composite in human serum

Biomaterials for bone tissue regeneration, including polymer-based composites, are typically evaluated in vitro prior to the clinical trials. However, such composites tested in vivo may behave different due to the specific body conditions. For example, some composites implanted into the tissue acidified due to transient postoperative inflammation may unexpectedly swell which delays the wound healing. Such massive swelling in acidic medium was previously observed for new elastic hydroxyapatite (HAp)/β-glucan biomaterial. However, in further clinical cases concerning the composite implantation in patients without significant inflammation indicators, no side effects were observed. Therefore, it was reasonable to test the effect of human serum of neutral pH (typical for noninflamed tissues) on the composite parameters, in particular volume changes. Thus, this article shows the characterization of physicochemical parameters of the composite after incubation (5 days) in human serum of neutral pH by means of weight and volume measurement, scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, microcomputed tomography, mercury intrusion, and biochemical techniques. Results showed that human serum collected from healthy people caused no uncontrolled changes in weight and volume, porosity and mechanical properties of the composite. Therefore, this suggests the lack of volume change-related side effects of HAp/glucan composite in bone defects treatment if postoperative inflammation is prevented. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2653-2664, 2018.

Nigella damascena L. Essential Oil-A Valuable Source of β-Elemene for Antimicrobial Testing

The most commonly used plant source of β-elemene is Curcuma wenyujin Y. H. Chen & C. Ling (syn. of Curcuma aromatic Salisb.) with its content in supercritical CO₂ extract up to 27.83%. However, the other rich source of this compound is Nigella damascena L. essential oil, in which β-elemene accounts for 47%. In this work, the effective protocol for preparative isolation of β-elemene from a new source-N. damascena essential oil-using high performance counter-current chromatography HPCCC was elaborated. Furthermore, since sesquiterpens are known as potent antimicrobials, the need for finding new agents designed to combat multi-drug resistant strains was addressed and the purified target compound and the essential oil were tested for its activity against a panel of Gram-positive and Gram-negative bacteria, fungi, and mycobacterial strains. The application of the mixture of petroleum ether, acetonitrile, and acetone in the ratio 2:1.5:0.5 (v/v) in the reversed phase mode yielded β-elemene with high purity in 70 min. The results obtained for antimicrobial assay clearly indicated that N. damascena essential oil and isolated β-elemene exert action against Mycobacterium tuberculosis strain H37Ra.

The Effect of Combining Natural Terpenes and Antituberculous Agents against Reference and Clinical Mycobacterium tuberculosis Strains

Background: On account of emergence of multi- and extensively drug-resistant Mycobacterium tuberculosis (Mtb) strains, combinations of drugs with natural compounds were tested to search for antibiotic activity enhancers. In this work we studied terpenes (α-pinene, bisabolol, β-elemene, (R)-limonene, (S)-limonene, myrcene, sabinene), which are the main constituents of essential oil obtained from Mutellina purpurea L., a plant with described antitubercular activity, to investigate their interactions with antibiotics against reference Mtb strains and multidrug-resistant clinical isolates. Methods: The serial dilution method was used to evaluate the minimal inhibitory concentration (MIC) of tested compounds, while the fractional inhibitory concentration index (FICI) was calculated for characterization of interactions. Moreover, IC50 values of tested compounds were determined using monkey kidney epithelial cell line (GMK). Results: The combinations of all studied terpenes with ethambutol or rifampicin resulted in a synergistic interaction. Bisabolol and (R)-limonene decreased the MIC for rifampicin at least two-fold for all tested strains, however no synergistic action was observed against virulent strains. The tested terpenes showed slight (bisabolol) or no cytotoxic effect against normal eukaryotic cells in vitro. Conclusions: The obtained enhanced activity (FICI < 0.5) of ethambutol and rifampicin against H37Ra strain under the influence of the studied terpenes may be correlated to the capability of essential oil constituents to modify bacterial resistance mechanisms in general. The observed differences in avirulent and virulent bacteria susceptibility to terpenes tested separately and in combinations with antibiotics can be correlated with the differences in the cell wall structure between H37Ra mutant and all virulent strains.

New approach in evaluation of ceramic-polymer composite bioactivity and biocompatibility

Regeneration of bone defects was promoted by a novel β-glucan/carbonate hydroxyapatite composite and characterized by Raman spectroscopy, microCT and electron microscopy. The elastic biomaterial with an apatite-forming ability was developed for bone tissue engineering and implanted into the critical-size defects of rabbits' tibiae. The bone repair process was analyzed on non-decalcified bone/implant sections during a 6-month regeneration period. Using spectroscopic methods, we were able to determine the presence of amides, lipids and assign the areas of newly formed bone tissue. Raman spectroscopy was also used to assess the chemical changes in the composite before and after the implantation process. SEM analyses showed the mineralization degree in the defect area and that the gap size decreased significantly. Microscopic images revealed that the implant debris were interconnected to the poorly mineralized inner side of a new bone tissue. Our study demonstrated that the composite may serve as a biocompatible background for collagen ingrowth and exhibits the advantages of applying Raman spectroscopy, SEM and microCT in studying these samples.

A simple and effective protocol for fast isolation of human Tenon's fibroblasts from a single trabeculectomy biopsy - a comparison of cell behaviour in different culture media

Background

Human Tenon’s fibroblasts (HTFs) play a crucial role in wound healing. They cause postoperative scarring of the filtering bleb and are thus responsible for trabeculectomy failure. This study aimed to find an effective and fast protocol for HTF isolation from trabeculectomy biopsies. The protocol was compared with the commonly recommended HTF isolation procedure, which uses Dulbecco’s modified Eagle’s medium (DMEM). We used Eagle’s minimum essential medium (EMEM) enriched with fibroblast growth factor (FGF), which selectively promoted the proliferation of HTF cells. A secondary goal was to compare HTF morphology, metabolism and growth during parallel cultivation of the isolated cells in FGF-enriched EMEM and DMEM.

Results

Standard procedures for HTF isolation from tissue biopsies require a 20- to 30-day culture of the explants to obtain the first monolayer. Our protocol yielded the first monolayer after approx. 15 days. More importantly, the majority of the cells were fibroblasts with only individual epithelium-derived cells present. Using FGF-enriched EMEM allowed 1.3 × 10⁶ vimentin-positive fibroblasts to be obtained from a single biopsy within approx. 25 days. Using DMEM resulted in isolation failure and required exchange to FGF-enriched medium to recover the fibroblast culture. HTFs maintained in FGF-enriched EMEM also showed faster proliferation and a different type I collagen production ability compared to HTFs cultured in DMEM. Thus, FGF-enriched EMEM is recommended for fast propagation of HTFs unless the aim of the study is to assess the effect of a tested agent on proliferation ability or type I collagen production.

Conclusions

Our fast protocol for HTF isolation allows easy setup of cell banks by researchers under laboratory conditions and could be very useful during testing of novel ophthalmologic anti-fibrotic agents in vitro. Molecular analysis of HTFs isolated from patients with known treatment histories may provide valuable information on the effects of some medications taken before glaucoma surgery on the subsequent wound-healing process and potential for trabeculectomy failure.

Electronic supplementary material

The online version of this article (doi:10.1186/s11658-017-0034-4) contains supplementary material, which is available to authorized users.

The use of calcium ions instead of heat treatment for β-1,3-glucan gelation improves biocompatibility of the β-1,3-glucan/HA bone scaffold

The aim of this study was to determine which procedure for β-1,3-glucan gelation - newly developed dialysis against calcium salt or described in the literature thermal technique - is more appropriate for fabrication of a biomaterial designed for bone tissue engineering applications. Thus, β-1,3-glucan/hydroxyapatite scaffolds were prepared based on two different methods and their physicochemical, microstructural, and biological properties were compared. Obtained results demonstrated that unlike thermal method-prepared β-1,3-glucan/hydroxyapatite material (glu/HAT), bone scaffold fabricated via dialysis method (glu/HA D) possessed rough surface resulting from the presence of CaCl₂ precipitates as proven by SEM and EDS analysis. As a consequence, glu/HA D scaffold released Ca²⁺ ions to the surrounding environment positively affecting osteoblast behaviour and biomineralization in vitro. Since glu/HA D material exhibited better bioactivity and biocompatibility compared to the glu/HA T scaffold, it may be concluded that the dialysis method is more suitable for β-1,3-glucan/hydroxyapatite biomaterial fabrication.

Structural transformation of synthetic hydroxyapatite under simulated in vivo conditions studied with ATR-FTIR spectroscopic imaging

Hydroxyapatite and carbonate-substituted hydroxyapatite are widely used in bone tissue engineering and regenerative medicine. Both apatite materials were embedded into recently developed ceramic/polymer composites, subjected to Simulated Body Fluid (SBF) for 30days and characterized using ATR-FTIR spectroscopic imaging to assess their behaviour and structures. The specific aim was to detect the transition phases between both types of hydroxyapatite during the test and to analyze the surface modification caused by SBF. ATR-FTIR spectroscopic imaging was successfully applied to characterise changes in the hydroxyapatite lattice due to the elastic properties of the scaffolds. It was observed that SBF treatment caused a replacement of phosphates in the lattice of non-substituted hydroxyapatite by carbonate ions. A detailed study excluded the formation of pure A type carbonate apatite. In turn, CO₃^2- content in synthetic carbonate-substituted hydroxyapatite decreased. The usefulness of ATR-FTIR spectroscopic imaging studies in the evaluation of elastic and porous β-glucan hydroxyapatite composites has been demonstrated.

Natural Terpenes Influence the Activity of Antibiotics against Isolated Mycobacterium tuberculosis

OBJECTIVE

In this study, we aimed to describe the influence of natural terpenes on the antimycobacterial activity of first-line tuberculostatic drugs against isolated Mycobacterium tuberculosis.

MATERIALS AND METHODS

The natural terpenes used in this study were R-limonene, S-limonene, myrcene, sabinene, α-pinene, and β-elemene. The values of the minimum inhibitory concentration (MIC) for these terpenes, as well as for combinations of terpenes with tuberculostatic antibiotics (ethambutol, isoniazid, and rifampicin), were determined using a tube log2 dilution method in the range of 125-0.059 µg/mL.

RESULTS

S-limonene had a strong synergistic effect with all tested antibiotics (MIC decreased from 16 to 0.475 µg/mL for ethambutol, from 16 to 0.237 µg/mL for rifampicin, and from 32 to 0.475 µg/mL for isoniazid). Combinations of myrcene, R-limonene, β-elemene, and sabinene with tuberculostatic antibiotics resulted in a decreased MIC of the antibiotics (from 3.9 to 0.475 µg/mL for ethambutol, from 15 to 0.475 µg/mL for isoniazid, and from 0.475 to 0.237 µg/mL for rifampicin) while combinations of α-pinene with ethambutol and isoniazid resulted in increased MIC values (from 16 to 125 µg/mL for ethambutol, and from 32 to 125 µg/mL for isoniazid). Rifampicin had a synergistic increase in activity with all the tested compounds.

CONCLUSIONS

Our study showed that terpenes enhance the activity of tuberculostatic antibiotics.

Hybrid chitosan/β-1,3-glucan matrix of bone scaffold enhances osteoblast adhesion, spreading and proliferation via promotion of serum protein adsorption

Initial protein adsorption to the material surface is crucial for osteoblast adhesion, survival, and rapid proliferation resulting in intensive new bone formation. The aim of this study was to demonstrate that modification of a chitosan matrix of chitosan/hydroxyapatite (chit/HA) biomaterial for bone tissue engineering applications with linear β-1,3-glucan (curdlan) leads to promotion of serum protein adsorption to the resultant scaffold (chit/glu/HA) and thus in enhancement of osteoblast adhesion, spreading and proliferation. Fabricated biomaterials were pre-adsorbed with different protein solutions and then protein adsorption and osteoblast behavior on the scaffolds were compared. Moreover, surface chemical composition, wettability and surface energy of biomaterials were compared. Modification of the chitosan matrix with β-1,3-glucan introduces a greater polarpart in the resultant chitosan/β-1,3-glucan matrix presumably resulting from more OH groups within the curdlan structure. Moreover, FTIR-ATR results suggest that there might be some sort of chemical interaction between the NH group of chitosan and the OH group of β-1,3-glucan. As a consequence, the chit/glu/HA scaffold adsorbs significantly more adhesion proteins that are crucial for osteoblasts compared to the chit/HA material, providing a higher density culture of well-spread osteoblasts on its surface. Obtained results revealed that not only is chit/glu/HA biomaterial a promising scaffold for bone tissue engineering applications, but the specific polysaccharide chit/glu matrix itself is promising for use in the biomedical material field to modify various biomaterials in order to enhance osteoblast adhesion and proliferation on their surfaces.

A Covalent Method of Gentamicin Bonding to Silica Supports

Results of a novel method of covalent bonding of an antibiotic (gentamicin) to silica bead supports are shown. Gentamicin was immobilized to four types of matrix: silica gel and porous glass beads activated by either silanization (APTES) or by adhesively bound keratin (with immobilization yield ranging from 36.5 to 91%). Gentamicin was immobilized to the supports after opening its carbohydrate ring in the molecule. This method of gentamicin activation before the immobilization process did not inhibit its antibiotic activity. The four gentamicin-containing immobilized preparations were stable, meaning that they did not release the antibiotic into the solution during the 30 days of incubation, not even during shaking experiments.

In vitro evaluation of antifungal and cytotoxic activities as also the therapeutic safety of the oxidized form of amphotericin B

The aim of this study was to evaluate the antifungal and cytotoxic activities of the oxidized form of amphotericin B (AmB-Ox) as well as to determine whether oxidation process of AmB is therapeutically beneficial in vitro. The antifungal activity was estimated against Candida albicans ATCC 10231 and Candida parasilosis ATCC 22019 by broth microdilution method according to the NCCLS M27-A2 standards. The in vitro cytotoxicity was evaluated using normal green monkey kidney cells (GMK) by MTT assay. The obtained results demonstrated that AmB-Ox possesses 16-fold decreased antifungal properties against the two Candida strains and 5-fold lower cytotoxic activity towards GMK cells in comparison with AmB. The therapeutic safety in vitro assessed by calculating the ratio between cytotoxicity (CC50 value) to antifungal activity (MIC value) showed that oxidation of AmB is a very unfavourable process in vitro, because leads to formation of derivative (AmB-Ox) that lost antifungal properties much more rapidly than cytotoxic activity. Thus, the process of the oxidation of AmB in vivo (if it occurs) can be also highly harmful for patient.

In vitro evaluation of the risk of inflammatory response after chitosan/HA and chitosan/β-1,3-glucan/HA bone scaffold implantation

The aim of the study was to evaluate in vitro the risk of inflammatory response induced by chitosan/hydroxyapatite (chit/HA) and novel chitosan/β-1,3-glucan/hydroxyapatite (chit/glu/HA) bone scaffolds. The inflammatory response was assessed via measurement of proinflammatory cytokine and ROI production by human monocytes, macrophages, and osteoblasts stimulated with investigated scaffolds. Moreover, adsorption of human serum/plasma proteins to the tested materials was determined. Both biomaterials did not induce intracellular ROI generation by monocytes, macrophages, and osteoblasts and did not stimulate proinflammatory cytokine (IL-6 and TNF-α) production by inflammatory cells. Moreover, the chit/glu/HA material induced increased TNF-α production by osteoblasts that is believed to enhance osteogenic differentiation. Thus, it was demonstrated that chit/HA and chit/glu/HA scaffolds carry a low risk of biomaterial-induced inflammatory response and are promising materials as bone scaffolds for bone tissue engineering and regenerative medicine applications.

The biocompatibility of carbon hydroxyapatite/β-glucan composite for bone tissue engineering studied with Raman and FTIR spectroscopic imaging

The spectroscopic approaches of FTIR imaging and Raman mapping were applied to the characterisation of a new carbon hydroxyapatite/β-glucan composite developed for bone tissue engineering. The composite is an artificial bone material with an apatite-forming ability for the bone repair process. Rabbit bone samples were tested with an implanted bioactive material for a period of several months. Using spectroscopic and chemometric methods, we were able to determine the presence of amides and phosphates and the distribution of lipid-rich domains in the bone tissue, providing an assessment of the composite's bioactivity. Samples were also imaged in transmission using an infrared microscope combined with a focal plane array detector. CaF2 lenses were also used on the infrared microscope to improve spectral quality by reducing scattering artefacts, improving chemometric analysis. The presence of collagen and lipids at the bone/composite interface confirmed biocompatibility and demonstrate the suitability of FTIR microscopic imaging with lenses in studying these samples. It confirmed that the composite is a very good background for collagen growth and increases collagen maturity with the time of the bone growth process. The results indicate the bioactive and biocompatible properties of this composite and demonstrate how Raman and FTIR spectroscopic imaging have been used as an effective tool for tissue characterisation.

TiO2 nanotube composite layers as delivery system for ZnO and Ag nanoparticles - an unexpected overdose effect decreasing their antibacterial efficacy

Enhancement of biocompatibility and antibacterial properties of implant materials is potentially beneficial for their practical value. Therefore, the use of metallic and metallic oxide nanoparticles as antimicrobial coatings components which induce minimized antibacterial resistance receives currently particular attention. In this work, TiO2 nanotubes layers loaded with ZnO and Ag nanoparticles were designed for biomedical coatings and delivery systems and evaluated for antimicrobial activity. TiO2 nanotubes themselves exhibited considerable and diameter-dependent antibacterial activity against planktonic Staphylococcus epidermidis cells but favored bacterial adhesion. Loading of nanotubes with moderate amount of ZnO nanoparticles significantly diminished S. epidermidis cell adhesion and viability just after 1.5h contact with modified surfaces. However, an increase of loaded ZnO amount unexpectedly altered the structure of nanoparticle-nanolayer, caused partial closure of nanotube interior and significantly reduced ZnO solubility and antibacterial efficacy. Co-deposition of Ag nanoparticles enhanced the antibacterial properties of synthesized coatings. However, the increase of ZnO quantity on Ag nanoparticles co-deposited surfaces favored the adhesion of bacterial cells. Thus, ZnO/Ag/TiO2 nanotube composite layers may be promising delivery systems for combating post-operative infections in hard tissue replacement procedures. However, the amount of loaded antibacterial agents must be carefully balanced to avoid the overdose and reduced efficacy.

Enhanced differentiation of osteoblastic cells on novel chitosan/β-1,3-glucan/bioceramic scaffolds for bone tissue regeneration

Bone scaffolds for regenerative medicine applications should have the ability to promote adhesion, proliferation and differentiation of osteoblast cells. Osteoconductive, osteoinductive and osteopromotive properties of the material are essential for rapid bone regeneration and new bone formation. In this study, the osteogenic potential of two novel tri-component scaffolds composed of krill chitosan, bacterial β-1,3-glucan and bioceramics (HAp or a mix of HAp/β-TCP granules) was investigated. The typical markers of the first (type I collagen), second (bone alkaline phosphatase) and third stages (osteocalcin) of the osteoblast differentiation process were evaluated during in vitro experimentation. The study was carried out using three various osteoblastic cell lines (normal human fetal osteoblast cells hFOB 1.19, human osteoblast-like cells derived from osteosarcoma Saos-2 and mouse calvarial preosteoblast cells MC3T3-E1 Subclone 4). The bone alkaline phosphatase (bALP) and osteocalcin (OC) were determined quantitatively using enzyme-linked immunosorbent assays, and type I collagen (Col I) was evaluated qualitatively using the direct immunofluorescence (DIF) method. The data obtained clearly prove that novel scaffolds have the ability to increase bALP activity, to enhance extracellular matrix synthesis (Col I and OC) and to induce mineralized nodule formation during osteogenic differentiation. In conclusion, novel tri-component materials have osteoconductive and osteopromotive properties, and thus are promising materials in bone tissue engineering applications to accelerate the bone regeneration process.

Addition of 1,3-β-D-glucan to chitosan-based composites enhances osteoblast adhesion, growth, and proliferation

The aim of this work was to prove using two osteoblastic cell lines that addition of bacterial 1,3-β-D-glucan to chitosan-based biocomposites significantly enhances adhesion, growth, and proliferation of osteoblast cells. Cytotoxicity of materials was evaluated indirectly using fluid extracts and by direct-contact method using live/dead double fluorescent staining. Cell adhesion was determined quantitatively by LDH total test and cell proliferation was assessed by confocal microscope observation. Obtained data clearly prove that addition of 1,3-β-D-glucan to the bi-component chitosan/bioceramic materials significantly enhances adhesion, growth, and proliferation of osteoblast cells. The results demonstrated that all investigated biomaterials were non-toxic and allowed for cell attachment. However, significantly better osteoblast growth was observed on scaffolds containing 1,3-β-D-glucan. Thus, it may be inferred that scaffolds modified with glucan are more promising materials for bone tissue engineering application than bi-component chitosan/bioceramic composites.

Chitosan/β-1,3-glucan/calcium phosphate ceramics composites--novel cell scaffolds for bone tissue engineering application

Bone tissue engineering put emphasis on fabrication three-dimensional biodegradable porous scaffolds that possess ability to enhance adhesion, proliferation and differentiation of osteoblast cells, therefore supporting bone regeneration and functional bone tissue formation. The aim of this work was to fabricate novel tri-component scaffolds composed of chitosan, β-1,3-glucan, and bioceramics and to evaluate their basic structural, mechanical, and biological properties. It should be noted that we are the first who describe fabrication and characterization of tri-component composites containing β-1,3-glucan. Microstructure of novel composites was visualized by computed tomography scanning and SEM. Compressive strength and Young's modulus of the composites were evaluated by compression testing. The biocompatibility was assessed in vitro by cytotoxicity, cell attachment and cell proliferation tests using human foetal osteoblast cell line. Our results demonstrated that novel composites possess good compressive strength as the effect of polysaccharide components of scaffolds, are very elastic, are non-toxic, favourable to cell adhesion and promote cell proliferation. However, novel biomaterials revealed relatively low Young's modulus values. Thus, we infer that fabricated novel composites are promising materials for bone tissue engineering application as cell scaffolds to fill small bone losses rather than as massive bone fillers exposed to mechanical load.

Antimycobacterial effect of extract and its components from Rheum rhaponticum

The global threat of tuberculosis demands the search for alternative antimycobacterial drugs. The present study examined roots and petioles from Rheum rhaponticum for antimycobacterial activity. Crude methanol extracts and eight phenolic compounds isolated by preparative column chromatography were tested against Mycobacterium tuberculosis H37Ra and M. bovis using the broth dilution method. The extract from roots and its components, such as rhaponticin, deoxyrhaponticin, resveratrol, barbaloin, aloe-emodin, and chrysophanol were found to have antimycobacterial activity against both microorganisms. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration of all the investigated samples ranged from 32 to 512 microg/mL. The anthracene derivatives were the most active; their MICs were 32, 64, and 64 microg/mL (M. tuberculosis H37Ra) and 128, 64, and 64 microg/mL (M. bovis), respectively. The microorganisms were resistant to stimulation with extract from petioles, as were quercetin and rutin. The results showed that anthracene and stilbene derivatives play a prominent role in the antimycobacterial properties of R. rhaponticum.

The cytotoxicity assessment of the novel latex urinary catheter with prolonged antimicrobial activity

The purpose of this study was to evaluate the in vitro biocompatibility of the novel Sparfoxacin (SPA)-treated latex catheter with previously performed prolonged antimicrobial activity. Rectangular-shaped test samples of silicone latex catheter were fabricated according to patented procedure permitting the immobilization of SPA on heparin (HP)-coated catheter by means of mixed, covalent and non-covalent bonds. Samples subjected to cytotoxicity assay were divided into four groups: (1) the untreated catheter, (2) HP-coated catheter, (3) HP-coated catheter with SPA immobilized in low SPA concentration solution (SPA-L treated sample), and (4) high SPA concentration solution (SPA-H treated sample). Then the samples were placed directly into green monkey kidney (GMK) cell monolayer for 24 h. After the incubation period, cytotoxicity was determined by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. The degree of cytotoxicity of each sample was evaluated according to the reference value represented by the control cells cultured without catheter sample. Statistical significance was determined by repeated t-test (P < 0.05). The cytotoxic effect of treated and untreated catheters was also estimated by microscopic observations of GMK cells morphological changes. SPA-treated catheters demonstrated high survival rates in MTT assay (>93%) on the contrary to the untreated catheters (6.13%) and HP-coated catheters (80.90%). Moreover, microscopic observation of GMK cells exposed to SPA-treated samples revealed no morphological changes and no cell growth reduction. We suggest that SPA-treated latex catheters are biofilm formation resistant (as we revealed in our previous work), considerably less toxic than untreated ones, and can be undoubtedly used in urological practice.