Correction: Understanding the Role of Growth Factors in Modulating Stem Cell Tenogenesis

[This corrects the article DOI: 10.1371/journal.pone.0083734.].

Enhancing Craniofacial Bone Reconstruction with Clinically Applicable 3D Bioprinted Constructs

Medical imaging and 3D bioprinting can be used to create patient-specific bone scaffolds with complex shapes and controlled inner architectures. This study investigated the effectiveness of a biomimetic approach to scaffold design by employing geometric control. The biomimetic scaffold with a dense external layer showed improved bone regeneration compared to the control scaffold. New bone filled the defected region in the biomimetic scaffolds, while the control scaffolds only presented new bone at the boundary. Histological examination also shows effective bone regeneration in the biomimetic scaffolds, while fibrotic tissue ingrowth is observed in the control scaffolds. These findings suggest that the biomimetic bone scaffold, designed to minimize competition for fibrotic tissue formation in the bony defect, can enhance bone regeneration. This study underscores the notion that patient-specific anatomy can be accurately translated into a 3D bioprinting strategy through medical imaging, leading to the fabrication of constructs with significant clinical relevance.

Application of Cartilage Extracellular Matrix to Enhance Therapeutic Efficacy of Methotrexate

BACKGROUND

Rheumatoid arthritis (RA) is characterized by chronic inflammation and joint damage. Methotrexate (MTX), a commonly used disease-modifying anti-rheumatic drug (DMARD) used in RA treatment. However, the continued use of DMARDs can cause adverse effects and result in limited therapeutic efficacy. Cartilage extracellular matrix (CECM) has anti-inflammatory and anti-vascular effects and promotes stem cell migration, adhesion, and differentiation into cartilage cells.

METHODS

CECM was assessed the dsDNA, glycosaminoglycan, collagen contents and FT-IR spectrum of CECM. Furthermore, we determined the effects of CECM and MTX on cytocompatibility in the SW 982 cells and RAW 264.7 cells. The anti-inflammatory effects of CECM and MTX were assessed using macrophage cells. Finally, we examined the in vivo effects of CECM in combination with MTX on anti-inflammation control and cartilage degradation in collagen-induced arthritis model. Anti-inflammation control and cartilage degradation were assessed by measuring the serum levels of RA-related cytokines and histology.

RESULTS

CECM in combination with MTX had no effect on SW 982, effectively suppressing only RAW 264.7 activity. Moreover, anti-inflammatory effects were enhanced when low-dose MTX was combined with CECM. In a collagen-induced arthritis model, low-dose MTX combined with CECM remarkably reduced RA-related and pro-inflammatory cytokine levels in the blood. Additionally, low-dose MTX combined with CECM exerted the best cartilage-preservation effects compared to those observed in the other therapy groups.

CONCLUSION

Using CECM as an adjuvant in RA treatment can augment the therapeutic effects of MTX, reduce existing drug adverse effects, and promote joint tissue regeneration.

Synovium-Derived Mesenchymal Stem Cell-Based Scaffold-Free Fibrocartilage Engineering for Bone-Tendon Interface Healing in an Anterior Cruciate Ligament Reconstruction Model

BACKGROUND

Current tendon and ligament reconstruction surgeries rely on scar tissue healing which differs from native bone-to-tendon interface (BTI) tissue. We aimed to engineer Synovium-derived mesenchymal stem cells (Sy-MSCs) based scaffold-free fibrocartilage constructs and investigate in vivo bone-tendon interface (BTI) healing efficacy in a rat anterior cruciate ligament (ACL) reconstruction model.

METHODS

Sy-MSCs were isolated from knee joint of rats. Scaffold-free sy-MSC constructs were fabricated and cultured in differentiation media including  TGF-β-only, CTGF-only, and TGF-β + CTGF. Collagenase treatment on tendon grafts was optimized to improve cell-to-graft integration. The effects of fibrocartilage differentiation and collagenase treatment on BTI integration was assessed by conducting histological staining, cell adhesion assay, and tensile testing. Finally, histological and biomechanical analyses were used to evaluate in vivo efficacy of fibrocartilage construct in a rat ACL reconstruction model.

RESULTS

Fibrocartilage-like features were observed with in the scaffold-free sy-MSC constructs when applying TGF-β and CTGF concurrently. Fifteen minutes collagenase treatment increased cellular attachment 1.9-fold compared to the Control group without affecting tensile strength. The failure stress was highest in the Col + D + group (22.494 ± 13.74 Kpa) compared to other groups at integration analysis in vitro. The ACL Recon + FC group exhibited a significant 88% increase in estimated stiffness (p = 0.0102) compared to the ACL Recon group at the 4-week postoperative period.

CONCLUSION

Scaffold-free, fibrocartilage engineering together with tendon collagenase treatment enhanced fibrocartilaginous BTI healing in ACL reconstruction.

3D Bioprinted Liver-on-a-Chip for Drug Cytotoxicity Screening

Tissues on a chip are sophisticated three-dimensional (3D) in vitro microphysiological systems designed to replicate human tissue conditions within dynamic physicochemical environments. However, the current fabrication methods for tissue spheroids on a chip require multiple parts and manual processing steps, including the deposition of spheroids onto prefabricated "chips." These challenges also lead to limitations regarding scalability and reproducibility. To overcome these challenges, we employed 3D printing techniques to automate the fabrication process of tissue spheroids on a chip. This allowed the simultaneous high-throughput printing of human liver spheroids and their surrounding polymeric flow chamber "chips" containing inner channels in a single step. The fabricated liver tissue spheroids on a liver-on-a-chip (LOC) were subsequently subjected to dynamic culturing by a peristaltic pump, enabling assessment of cell viability and metabolic activities. The 3D printed liver spheroids within the printed chips demonstrated high cell viability (>80%), increased spheroid size, and consistent adenosine triphosphate (ATP) activity and albumin production for up to 14 days. Furthermore, we conducted a study on the effects of acetaminophen (APAP), a nonsteroidal anti-inflammatory drug, on the LOC. Comparative analysis revealed a substantial decline in cell viability (<40%), diminished ATP activity, and reduced spheroid size after 7 days of culture within the APAP-treated LOC group, compared to the nontreated groups. These results underscore the potential of 3D bioprinted tissue chips as an advanced in vitro model that holds promise for accurately studying in vivo biological processes, including the assessment of tissue response to administered drugs, in a high-throughput manner.

Remaining microtia tissue as a source for 3D bioprinted elastic cartilage tissue constructs, potential use for surgical microtia reconstruction

The absence of ears in children is a global problem. An implant made of costal cartilage is the standard procedure for ear reconstruction; however, side effects such as pneumothorax, loss of thoracic cage shape, and respiratory complications have been documented. Three-dimensional (3D) printing allows the generation of biocompatible scaffolds that mimic the shape, mechanical strength, and architecture of the native extracellular matrix necessary to promote new elastic cartilage formation. We report the potential use of a 3D-bioprinted poly-ε-caprolactone (3D-PCL) auricle-shaped framework seeded with remaining human microtia chondrocytes for the development of elastic cartilage for autologous microtia ear reconstruction. An in vivo assay of the neo-tissue formed revealed the generation of a 3D pinna-shaped neo-tissue, and confirmed the formation of elastic cartilage by the presence of type II collagen and elastin with histological features and a protein composition consistent with normal elastic cartilage. According to our results, a combination of 3D-PCL auricle frameworks and autologous microtia remnant tissue generates a suitable pinna structure for autologous ear reconstruction.

Biofunctionalized Electrospun Vascular Scaffolds for Enhanced Antithrombotic Properties and In Situ Endothelialization

The development of innovative vascular substitutes has become increasingly significant due to the prevalence of vascular diseases. In this study, we designed a biofunctionalized electrospun vascular scaffold by chemically conjugating heparin molecules as an antithrombotic agent with an endothelial cell (EC)-specific antibody to promote in situ endothelialization. To optimize this biofunctionalized electrospun vascular scaffolding system, we examined various parameters, including material compositions, cross-linker concentrations, and cross-linking and conjugation processes. The findings revealed that a higher degree of heparin conjugation onto the vascular scaffold resulted in improved antithrombotic properties, as confirmed by the platelet adhesion test. Additionally, the flow chamber study demonstrated that the EC-specific antibody immobilization enhanced the scaffold's EC-capturing capability compared to a nonconjugated vascular scaffold. The optimized biofunctionalized vascular scaffolds also displayed exceptional mechanical properties, such as suture retention strength and tensile properties. Our research demonstrated that the biofunctionalized vascular scaffolds and the directed immobilization of bioactive molecules could provide the necessary elements for successful acellular vascular tissue engineering applications.

Multicellular bioprinted skin facilitates human-like skin architecture in vivo

Bioprinting is a promising alternative method to generate skin substitutes because it can replicate the structural organization of the skin into biomimetic layers in vitro. In this study, six primary human skin cell types were used to bioprint a trilayer skin construct consisting of epidermis, dermis, and hypodermis. Transplantation of the bioprinted skin with human cells onto full-thickness wounds of nu/nu mice promoted rapid vascularization and formation of epidermal rete ridges analogous to the native human epidermis, with a normal-looking extracellular matrix. Cell-specific staining confirmed the integration of the implanted cells into the regenerated skin. Using a similar approach, a 5 centimeter-by-5 centimeter bioprinted autologous porcine skin graft was transplanted onto full-thickness wounds in a porcine excisional wound model. The bioprinted skin graft improved epithelialization, reduced skin contraction, and supported normal collagen organization with reduced fibrosis. Differential gene expression demonstrated pro-remodeling protease activity in wounds transplanted with bioprinted autologous skin grafts. These results demonstrate that bioprinted skin can support skin regeneration to allow for nonfibrotic wound healing and suggest that the skin bioprinting technology may be applicable for human clinical use.

Safety and Feasibility Study of Autologous Engineered Urethral Constructs for the Treatment of Strictures: Clinical Trial Update

Autologous engineered urethral constructs are a promising treatment option for definitive management of long and complex urethral strictures, with the prospect of eliminating stricture recurrence.

The correlation between rheological properties and extrusion-based printability in bioink artifact quantification

Bioinks for cell-based bioprinting face availability limitations. Furthermore, the bioink development process needs comprehensive printability assessment methods and a thorough understanding of rheological factors' influence on printing outcomes. To bridge this gap, our study aimed to investigate the relationship between rheological properties and printing outcomes. We developed a specialized bioink artifact specifically designed to improve the quantification of printability assessment. This bioink artifact adhered to established criteria from extrusion-based bioprinting approaches. Seven hydrogel-based bioinks were selected and tested using the bioink artifact and rheological measurement. Rheological analysis revealed that the high-performing bioinks exhibited notable characteristics such as high storage modulus, low tan(δ), high shear-thinning capabilities, high yield stress, and fast, near-complete recovery abilities. Although rheological data alone cannot fully explain printing outcomes, certain metrics like storage modulus and tan(δ) correlated well (R2 > 0.9) with specific printing outcomes, such as gap-spanning capability and turn accuracy. This study provides a comprehensive examination of bioink shape fidelity across a wide range of bioinks, rheological measures, and printing outcomes. The results highlight the importance of considering the holistic view of bioink's rheological properties and directly measuring printing outcomes. These findings underscore the need to enhance bioink availability and establish standardized methods for assessing printability.

3D Bioprinting Strategies for Articular Cartilage Tissue Engineering

Articular cartilage is the avascular and aneural tissue which is the primary connective tissue covering the surface of articulating bone. Traumatic damage or degenerative diseases can cause articular cartilage injuries that are common in the population. As a result, the demand for new therapeutic options is continually increasing for older people and traumatic young patients. Many attempts have been made to address these clinical needs to treat articular cartilage injuries, including osteoarthritis (OA); however, regenerating highly qualified cartilage tissue remains a significant obstacle. 3D bioprinting technology combined with tissue engineering principles has been developed to create biological tissue constructs that recapitulate the anatomical, structural, and functional properties of native tissues. In addition, this cutting-edge technology can precisely place multiple cell types in a 3D tissue architecture. Thus, 3D bioprinting has rapidly become the most innovative tool for manufacturing clinically applicable bioengineered tissue constructs. This has led to increased interest in 3D bioprinting in articular cartilage tissue engineering applications. Here, we reviewed current advances in bioprinting for articular cartilage tissue engineering.

Design and bioprinting for tissue interfaces

Tissue interfaces include complex gradient structures formed by transitioning of biochemical and mechanical properties in micro-scale. This characteristic allows the communication and synchronistic functioning of two adjacent but distinct tissues. It is particularly challenging to restore the function of these complex structures by transplantation of scaffolds exclusively produced by conventional tissue engineering methods. Three-dimensional (3D) bioprinting technology has opened an unprecedented approach for precise and graded patterning of chemical, biological and mechanical cues in a single construct mimicking natural tissue interfaces. This paper reviews and highlights biochemical and biomechanical design for 3D bioprinting of various tissue interfaces, including cartilage-bone, muscle-tendon, tendon/ligament-bone, skin, and neuro-vascular/muscular interfaces. Future directions and translational challenges are also provided at the end of the paper.

Identification and characterization of stem cell secretome-based recombinant proteins for wound healing applications

Stem cells have been introduced as a promising therapy for acute and chronic wounds, including burn injuries. The effects of stem cell-based wound therapies are believed to result from the secreted bioactive molecules produced by stem cells. Therefore, treatments using stem cell-derived conditioned medium (CM) (referred to as secretome) have been proposed as an alternative option for wound care. However, safety and regulatory concerns exist due to the uncharacterized biochemical content and variability across different batches of CM samples. This study presents an alternative treatment strategy to mitigate these concerns by using fully characterized recombinant proteins identified by the CM analysis to promote pro-regenerative healing. This study analyzed the secretome profile generated from human placental stem cell (hPSC) cultures and identified nine predominantly expressed proteins (ANG-1, FGF-7, Follistatin, HGF, IL-6, Insulin, TGFβ-1, uPAR, and VEGF) that are known to contribute to wound healing and angiogenesis. These proteins, referred to as s (CMFs), were used in combination to test the effects on human dermal fibroblasts (HDFs). Our results showed that CMF treatment increased the HDF growth and accelerated cell migration and wound closure, similar to stem cell and CM treatments. In addition, the CMF treatment promoted angiogenesis by enhancing new vessel formation. These findings suggest that the defined CMF identified by the CM proteomic analysis could be an effective therapeutic solution for wound healing applications. Our strategy eliminates the regulatory concerns present with stem cell-derived secretomes and could be developed as an off-the-shelf product for immediate wound care and accelerating healing.

Release Kinetics and In Vitro Characterization of Sodium Percarbonate and Calcium Peroxide to Oxygenate Bioprinted Tissue Models

Oxygen-generating materials have been used in several tissue engineering applications; however, their application as in situ oxygen supply within bioprinted constructs has not been deeply studied. In this study, two oxygen-generating materials, sodium percarbonate (SPO) and calcium peroxide (CPO), were studied for their oxygen release kinetics under a 0.1% O₂ condition. In addition, a novel cell-culture-insert setup was used to evaluate the effects of SPO and CPO on the viability of skeletal muscle cells under the same hypoxic condition. Results showed that SPO had a burst oxygen release, while CPO had a more stable oxygen release than SPO. Both SPO and CPO reduced cell viability when used alone. The addition of catalase in SPO and CPO increased the oxygen release rate, as well as improving the viability of skeletal muscle cells; however, CPO still showed cytotoxicity with catalase. Additionally, the utilization of 1 mg/mL SPO and 20 U catalase in a hydrogel for bioprinting significantly enhanced the cell viability under the hypoxic condition. Moreover, bioprinted muscle constructs could further differentiate into elongated myotubes when transferring back to the normoxic condition. This work provides an excellent in vitro model to test oxygen-generating materials and further discover their applications in bioprinting, where they represent promising avenues to overcome the challenge of oxygen shortage in bioprinted constructs before their complete vascularization.

The Delivery of the Recombinant Protein Cocktail Identified by Stem Cell-Derived Secretome Analysis Accelerates Kidney Repair After Renal Ischemia-Reperfusion Injury

Recent advances in cell therapy have shown the potential to treat kidney diseases. As the treatment effects of the cell therapies are mainly attributed to secretomes released from the transplanted cells, the delivery of secretomes or conditioned medium (CM) has emerged as a promising treatment option for kidney disease. We previously demonstrated that the controlled delivery of human placental stem cells (hPSC)-derived CM using platelet-rich plasma (PRP) ameliorated renal damages and restored kidney function in an acute kidney injury (AKI) model in rats. The proteomics study of the hPSC-CM revealed that hPSC secrets several proteins that contribute to kidney tissue repair. Based on our results, this study proposed that the proteins expressed in the hPSC-CM and effective for kidney repair could be used as a recombinant protein cocktail to treat kidney diseases as an alternative to CM. In this study, we analyzed the secretome profile of hPSC-CM and identified five proteins (follistatin, uPAR, ANGPLT4, HGF, VEGF) that promote kidney repair. We investigated the feasibility of delivering the recombinant protein cocktail to improve structural and functional recovery after AKI. The pro-proliferative and anti-apoptotic effects of the protein cocktail on renal cells are demonstrated in vitro and in vivo. The intrarenal delivery of these proteins with PRP ameliorates the renal tubular damage and improved renal function in the AKI-induced rats, yielding similar therapeutic effects compared to the CM delivery. These results indicate that our strategy may provide a therapeutic solution to many challenges associated with kidney repair resulting from the lack of suitable off-the-shelf regenerative medicine products.

In vitrobreast cancer model with patient-specific morphological features for personalized medicine

In vitro cancer models that can simulate patient-specific drug responses for personalized medicine have attracted significant attention. However, the technologies used to produce such models can only recapitulate the morphological heterogeneity of human cancer tissue. Here, we developed a novel 3D technique to bioprint an in vitro breast cancer model with patient-specific morphological features. This model can precisely mimic the cellular microstructures of heterogeneous cancer tissues and produce drug responses similar to those of human cancers. We established a bioprinting process for generating cancer cell aggregates with ductal and solid tissue microstructures that reflected the morphology of breast cancer tissues, and applied it to develop breast cancer models. The genotypic and phenotypic characteristics of the ductal and solid cancer aggregates bioprinted with human breast cancer cells (MCF7, SKBR3, MDA-MB-231) were respectively similar to those of early and advanced cancers. The bioprinted solid cancer cell aggregates showed significantly higher hypoxia (>8 times) and mesenchymal (>2-4 times) marker expressions, invasion activity (>15 times), and drug resistance than the bioprinted ductal aggregates. Co-printing the ductal and solid aggregates produced heterogeneous breast cancer tissue models that recapitulated three different stages of breast cancer tissue morphology. The bioprinted cancer tissue models representing advanced cancer were more and less resistant, respectively, to the anthracycline antibiotic doxorubicin and the hypoxia-activated prodrug tirapazamine; these were analogous to the results in human cancer. The present findings showed that cancer cell aggregates can mimic the pathological micromorphology of human breast cancer tissue and they can be bioprinted to produce breast cancer tissue in vitro that can morphologically represent the clinical stage of cancer in individual patients.

High Estimated 24-Hour Urinary Sodium Excretion Is Related to Symptomatic Knee Osteoarthritis: A Nationwide Cross-Sectional Population-Based Study

OBJECTIVES

High salt intake results in various harmful effects on human health including hypertension, cardiovascular disease, and reduced bone density. Despite this, there are very few studies in the literature that have investigated the association between sodium intake and osteoarthritis (OA). Therefore, we aimed to explore these associations in a Korean population.

METHODS

This study used cross-sectional data from adult subjects aged 50-75 years from two consecutive periods of the Korean National Health and Nutrition Examination Survey V-VII (2010-2011 and 2014-2016). The estimated 24-hour urinary sodium excretion (24HUNa) was used as a surrogate marker of salt intake. In the 2010-2011 dataset, knee OA (KOA) was defined as the presence of the radiographic features of OA and knee pain. The association between KOA and salt intake was analysed using univariable and multivariable logistic regression methods. For the sensitivity analysis, the same procedures were conducted on subjects with self-reported OA (SR-OA) with knee pain in the 2010-2011 dataset and any site SR-OA in the 2014-2016 dataset.

RESULTS

Subjects with KOA had significantly lower energy intake, but higher 24HUNa than those without KOA. The restricted cubic spline plots demonstrated a J-shaped distribution between 24HUNa and prevalent KOA. When 24HUNa was stratified into five groups (<2, 2-3, 3-4, 4-5 and ≥5 g/day), subjects with high sodium intake (≥5 g/day) had a higher risk of KOA (odds ratio [OR] = 1.64, 95% confidence interval [CI] 1.03-2.62) compared to the reference group (3-4 g/day) after adjusting for covariates. The sensitivity analysis based on SR-OA with knee pain showed that high sodium intake was also significantly associated with increased prevalence of OA (OR = 1.84, 95% CI 1.10-3.10) compared with the reference group. Regarding SR-OA at any site in the 2014-2016 dataset, estimated 24HUNa showed a significantly positive association with the presence of SR-OA after adjusting for potential confounders.

CONCLUSIONS

This nationwide Korean representative study showed a significant association between symptomatic KOA and high sodium intake (≥5 g/day). Avoidance of a diet high in salt might be beneficial as a non-pharmacologic therapy for OA.

Bioprinting Au Natural: The Biologics of Bioinks

The development of appropriate bioinks is a complex task, dependent on the mechanical and biochemical requirements of the final construct and the type of printer used for fabrication. The two most common tissue printers are micro-extrusion and digital light projection printers. Here we briefly discuss the required characteristics of a bioink for each of these printing processes. However, physical printing is only a short window in the lifespan of a printed construct-the system must support and facilitate cellular development after it is printed. To that end, we provide a broad overview of some of the biological molecules currently used as bioinks. Each molecule has advantages for specific tissues/cells, and potential disadvantages are discussed, along with examples of their current use in the field. Notably, it is stressed that active researchers are trending towards the use of composite bioinks. Utilizing the strengths from multiple materials is highlighted as a key component of bioink development.

Enhanced method to select human oogonial stem cells for fertility research

Alternative methods to obtain mature oocytes are still needed for women with premature ovarian failure (POF). Oogonial stem cells (OSCs), found in adult ovaries, have provided insight into potential paths to treating infertility. Previously, the DDX4 antibody marker alone was utilized to isolate OSCs; however, extensive debate over its location in OSCs versus resulting oocytes (transmembrane or intracytoplasmic) has raised doubt about the identity of these cells. Separate groups, however, have efficiently isolated OSCs using another antibody marker Ifitm3 which is consistently recognized to be transmembrane in location. We hypothesized that by using anti-DDX4 and anti-IFITM3 antibodies, in combination, with MACS, we would improve the yield of isolated OSCs versus using anti-DDX4 antibodies alone. Our study supports earlier findings of OSCs in ovaries during the entire female lifespan: from reproductive age through post-menopausal age. MACS sorting ovarian cells using a the two-marker combination yielded a ~ twofold higher percentage of OSCs from a given mass of ovarian tissue compared to existing single marker methods while minimizing the debate surrounding germline marker selection. During in vitro culture, isolated cells retained the germline phenotype expression of DDX4 and IFITM3 as confirmed by gene expression analysis, demonstrated characteristic germline stem cell self-assembly into embryoid bodies, and formed > 40 µm "oocyte-like" structures that expressed the early oocyte markers GDF9, DAZL, and ZP1. This enhanced and novel method is clinically significant as it could be utilized in the future to more efficiently produce mature, secondary oocytes, for use with IVF/ICSI to treat POF patients.

Bioreactor design and validation for manufacturing strategies in tissue engineering

The fields of regenerative medicine and tissue engineering offer new therapeutic options to restore, maintain or improve tissue function following disease or injury. To maximize the biological function of a tissue-engineered clinical product, specific conditions must be maintained within a bioreactor to allow the maturation of the product in preparation for implantation. Specifically, the bioreactor should be designed to mimic the mechanical, electrochemical and biochemical environment that the product will be exposed to in vivo. Real-time monitoring of the functional capacity of tissue-engineered products during manufacturing is a critical component of the quality management process. The present review provides a brief overview of bioreactor engineering considerations. In addition, strategies for bioreactor automation, in-line product monitoring and quality assurance are discussed.

Self-aligned myofibers in 3D bioprinted extracellular matrix-based construct accelerate skeletal muscle function restoration

To achieve rapid skeletal muscle function restoration, many attempts have been made to bioengineer functional muscle constructs by employing physical, biochemical, or biological cues. Here, we develop a self-aligned skeletal muscle construct by printing a photo-crosslinkable skeletal muscle extracellular matrix-derived bioink together with poly(vinyl alcohol) that contains human muscle progenitor cells. To induce the self-alignment of human muscle progenitor cells, in situ uniaxially aligned micro-topographical structure in the printed constructs is created by a fibrillation/leaching of poly(vinyl alcohol) after the printing process. The in vitro results demonstrate that the synergistic effect of tissue-specific biochemical signals (obtained from the skeletal muscle extracellular matrix-derived bioink) and topographical cues [obtained from the poly(vinyl alcohol) fibrillation] improves the myogenic differentiation of the printed human muscle progenitor cells with cellular alignment. Moreover, this self-aligned muscle construct shows the accelerated integration with neural networks and vascular ingrowth in vivo, resulting in rapid restoration of muscle function. We demonstrate that combined biochemical and topographic cues on the 3D bioprinted skeletal muscle constructs can effectively reconstruct the extensive muscle defect injuries.

Combinations of photoinitiator and UV absorber for cell-based digital light processing (DLP) bioprinting

Digital light processing (DLP) bioprinting, which provides predominant speed, resolution, and adaptability for fabricating complex cell-laden three-dimensional (3D) structures, requires a combination of photoinitiator (PI) and UV absorber (UA) that plays critical roles during the photo-polymerization of bioinks. However, the PI and UA combination has not been highlighted for cell-based DLP bioprinting. In this study, the most used PIs and UAs in cell-based bioprinting were compared to optimize a combination that can ensure the maximum DLP printability, while maintaining the cellular activities during the process. The crosslinking time and printability of PIs were assessed, which are critical in minimizing the cell damage by the UV exposure during the fabrication process. On the other hand, the UAs were evaluated based on their ability to prevent the over-curing of layers beyond the focal layer and the scattering of light, which are required for the desirable crosslinking of a hydrogel and high resolution (25-50µms) to create a complex 3D cell-laden construct. Lastly, the cytotoxicity of PIs and UAs was assessed by measuring the cellular activity of 2D cultured and 3D bioprinted cells. The optimized PI and UA combination provided high initial cell viability (>90%) for up to 14 days in culture and could fabricate complex 3D structures like a perfusable heart-shaped construct with open vesicles and atriums. This combination can provide a potential starting condition when preparing the bioink for the cell-based DLP bioprinting in tissue engineering applications.

Accelerating neovascularization and kidney tissue formation with a 3D vascular scaffold capturing native vascular structure

Establishing an adequate vascularization of three-dimensional (3D) bioengineered tissues remains a critical challenge. We previously fabricated a vascular scaffold using the vascular corrosion casting technique, which provides a similar 3D geometry of native kidney vasculature. In this study, we functionalized the collagen vascular scaffold with a controlled release of vascular endothelial growth factor (VEGF vascular scaffold) to further promote vascularization. The VEGF vascular scaffold showed improved angiogenic capability in 2-dimensional (2D) and 3D in vitro settings. Implantation of the VEGF vascular scaffold seeded with human renal cells into a rat kidney demonstrated enhanced implant vascularization and reduced apoptosis of implanted human renal cells. Hybrid renal tubule-like structures composed of implanted human and migrated host renal cells were formed. This work highlights the critical role of early vascularization of the geometrically mimetic vascular scaffold using the VEGF incorporated vascular scaffold in reducing apoptosis of implanted cells as well as the formation of renal tissue structures.

Self-Assembling Peptide Solution Accelerates Hemostasis

Objective: One of the leading causes of death following traumatic injury is exsanguination. Biological material-based hemostatic agents such as fibrin, thrombin, and albumin have a high risk for causing infection. Synthetic peptide-based hemostatic agents offer an attractive alternative. The objective of this study is to explore the potential of h9e peptide as an effective hemostatic agent in both in vitro and in vivo models. Approach: In vitro blood coagulation kinetics in the presence of h9e peptide was determined as a function of gelation time using a dynamic rheometer. In vivo hemostatic effects were studied using the Wistar rat model. Results were compared to those of the commercial hemostatic product Celox™, a chitosan-based product. Adhesion of h9e peptide was evaluated using the platelet adhesion test. Biocompatibility of h9e peptide was studied in vivo using a mouse model. Results: After h9e peptide solution was mixed with blood, gelation started immediately, increased rapidly with time, and reached more than 100 Pa within 3 s. Blood coagulation strength increased as h9e peptide wt% concentration increased. In the rat model, h9e peptide solution at 5% weight concentration significantly reduced both bleeding time and blood loss, outperforming Celox. Preliminary pathological studies indicate that h9e peptide solution is biocompatible and did not have negative effects when injected subcutaneously in a mouse model. Innovation: For the first time, h9e peptide was found to have highly efficient hemostatic effects by forming nanoweb-like structures, which act as a preliminary thrombus and a surface to arrest bleeding 82% faster compared to the commercial hemostatic agent Celox. Conclusion: This study demonstrates that h9e peptide is a promising hemostatic biomaterial, not only because of its greater hemostatic effect than commercial product Celox but also because of its excellent biocompatibility based on the in vivo mouse model study.

A photo-crosslinkable cartilage-derived extracellular matrix bioink for auricular cartilage tissue engineering

Three-dimensional (3D) bioprinting of patient-specific auricular cartilage constructs could aid in the reconstruction process of traumatically injured or congenitally deformed ear cartilage. To achieve this, a hydrogel-based bioink is required that recapitulates the complex cartilage microenvironment. Tissue-derived decellularized extracellular matrix (dECM)-based hydrogels have been used as bioinks for cell-based 3D bioprinting because they contain tissue-specific ECM components that play a vital role in cell adhesion, growth, and differentiation. In this study, porcine auricular cartilage tissues were isolated and decellularized, and the decellularized cartilage tissues were characterized by histology, biochemical assay, and proteomics. This cartilage-derived dECM (cdECM) was subsequently processed into a photo-crosslinkable hydrogel using methacrylation (cdECMMA) and mixed with chondrocytes to create a printable bioink. The rheological properties, printability, and in vitro biological properties of the cdECMMA bioink were examined. The results showed cdECM was obtained with complete removal of cellular components while preserving major ECM proteins. After methacrylation, the cdECMMA bioinks were printed in anatomical ear shape and exhibited adequate mechanical properties and structural integrity. Specifically, auricular chondrocytes in the printed cdECMMA hydrogel constructs maintained their viability and proliferation capacity and eventually produced cartilage ECM components, including collagen and glycosaminoglycans (GAGs). The potential of cell-based bioprinting using this cartilage-specific dECMMA bioink is demonstrated as an alternative option for auricular cartilage reconstruction.

Pelvic floor muscle function recovery using biofabricated tissue constructs with neuromuscular junctions

Damages in pelvic floor muscles often cause dysfunction of the entire pelvic urogenital system, which is clinically challenging. A bioengineered skeletal muscle construct that mimics structural and functional characteristics of native skeletal muscle could provide a therapeutic option to restore normal muscle function. However, most of the current bioengineered muscle constructs are unable to provide timely innervation necessary for successful grafting and functional recovery. We previously have demonstrated that post-synaptic acetylcholine receptors (AChR) clusters can be pre-formed on cultured skeletal muscle myofibers with agrin treatment and suggested that implantation of AChR clusters containing myofibers could accelerate innervation and recovery of muscle function. In this study, we develop a 3-dimensional (3D) bioprinted human skeletal muscle construct, consisting of multi-layers bundles with aligned and AChR clusters pre-formed human myofibers, and investigate the effect of pre-formed AChR clusters in bioprinted skeletal muscle constructs and innervation efficiency in vivo. Agrin treatment successfully pre-formed functional AChR clusters on the bioprinted muscle constructs in vitro that increased neuromuscular junction (NMJ) formation in vivo in a transposed nerve implantation model in rats. In a rat model of pelvic floor muscle injury, implantation of skeletal muscle constructs containing the pre-formed AChR clusters resulted in functional muscle reconstruction with accelerated construct innervation. This approach may provide a therapeutic solution to the many challenges associated with pelvic floor reconstruction resulting from the lack of suitable bioengineered tissue for efficient innervation and muscle function restoration.

Engineering Functional Rat Ovarian Spheroids Using Granulosa and Theca Cells

Although menopausal hormone therapy (MHT) is the most effective approach to managing the loss of ovarian activity, serious side effects have been reported. Cell-based therapy is a promising alternative for MHT. This study constructed engineered ovarian cell spheroids and investigated their endocrine function. Theca and granulosa cells were isolated from ovaries of 10-week-old rats. Two types of engineered ovarian cell spheroids were fabricated through forced aggregation in microwells, multilayered spheroids with centralized granulosa aggregates surrounded by an outer layer of theca cells and mixed ovarian spheroids lacking spatial rearrangement. The ovarian cell spheroids were encapsulated into a collagen gel. Non-aggregated ovarian cells served as controls. The endocrine function of the engineered ovarian spheroids was assessed over 30 days. The structure of the spheroids was well maintained during culture. The secretion of 17β-estradiol from both types of engineered ovarian cell spheroids was higher than in the control group and increased continuously in a time-dependent manner. Secretion of 17β-estradiol in the multi-layered ovarian cell spheroids was higher than in the non-layered constructs. Increased secretion of progesterone was detected in the multi-layered ovarian cell spheroids at day 5 of culture and was sustained during the culture period. The initial secretion level of progesterone in the non-layered ovarian cell spheroids was similar to those from the controls and increased significantly from days 21 to 30. An in vitro rat model of engineered ovarian cell spheroids was developed that was capable of secreting sex steroid hormones, indicating that the hormone secreting function of ovaries can be recapitulated ex vivo and potentially adapted for MHT.

Microfluidic Systems for Assisted Reproductive Technologies: Advantages and Potential Applications

Microfluidic technologies have emerged as a powerful tool that can closely replicate the in-vivo physiological conditions of organ systems. Assisted reproductive technology (ART), while being able to achieve successful outcomes, still faces challenges related to technical error, efficiency, cost, and monitoring/assessment. In this review, we provide a brief overview of the uses of microfluidic devices in the culture, maintenance and study of ovarian follicle development for experimental and therapeutic applications. We discuss existing microfluidic platforms for oocyte and sperm selection and maintenance, facilitation of fertilization by in-vitro fertilization/intracytoplastimc sperm injection, and monitoring, selection and maintenance of resulting embryos. Furthermore, we discuss the possibility of future integration of these technologies onto a single platform and the limitations facing the development of these systems. In spite of these challenges, we envision that microfluidic systems will likely evolve and inevitably revolutionize both fundamental, reproductive physiology/toxicology research as well as clinically applicable ART.

A photo-crosslinkable cartilage-derived extracellular matrix bioink for auricular cartilage tissue engineering

Three-dimensional (3D) bioprinting of patient-specific auricular cartilage constructs could aid in the reconstruction process of traumatically injured or congenitally deformed ear cartilage. To achieve this, a hydrogel-based bioink is required that recapitulates the complex cartilage microenvironment. Tissue-derived decellularized extracellular matrix (dECM)-based hydrogels have been used as bioinks for cell-based 3D bioprinting because they contain tissue-specific ECM components that play a vital role in cell adhesion, growth, and differentiation. In this study, porcine auricular cartilage tissues were isolated and decellularized, and the decellularized cartilage tissues were characterized by histology, biochemical assay, and proteomics. This cartilage-derived dECM (cdECM) was subsequently processed into a photo-crosslinkable hydrogel using methacrylation (cdECMMA) and mixed with chondrocytes to create a printable bioink. The rheological properties, printability, and in vitro biological properties of the cdECMMA bioink were examined. The results showed cdECM was obtained with complete removal of cellular components while preserving major ECM proteins. After methacrylation, the cdECMMA bioinks were printed in anatomical ear shape and exhibited adequate mechanical properties and structural integrity. Specifically, auricular chondrocytes in the printed cdECMMA hydrogel constructs maintained their viability and proliferation capacity and eventually produced cartilage ECM components, including collagen and glycosaminoglycans (GAGs). The potential of cell-based bioprinting using this cartilage-specific dECMMA bioink is demonstrated as an alternative option for auricular cartilage reconstruction.

NIR fluorescence for monitoring in vivo scaffold degradation along with stem cell tracking in bone tissue engineering

Stem cell-based tissue engineering has the potential to use as an alternative for autologous tissue grafts; however, the contribution of the scaffold degradation along with the transplanted stem cells to in vivo tissue regeneration remains poorly understood. Near-infrared (NIR) fluorescence imaging has great potential to monitor implants while avoiding autofluorescence from the adjacent host tissue. To utilize NIR imaging for in vivo monitoring of scaffold degradation and cell tracking, we synthesized 800-nm emitting NIR-conjugated PCL-ran-PLLA-ran-PGA (ZW-PCLG) copolymers with three different degradation rates and labeled 700-nm emitting lipophilic pentamethine (CTNF127) on the human placental stem cells (CT-PSCs). The 3D bioprinted hybrid constructs containing the CT-PSC-laden hydrogel together with the ZW-PCLG scaffolds demonstrate that NIR fluorescent imaging enables tracking of in vivo scaffold degradation and stem cell fate for bone regeneration in a rat calvarial bone defect model. This NIR-based monitoring system can be effectively utilized to study cell-based tissue engineering applications.

The Role of the Microenvironment in Controlling the Fate of Bioprinted Stem Cells

The field of tissue engineering and regenerative medicine has made numerous advances in recent years in the arena of fabricating multifunctional, three-dimensional (3D) tissue constructs. This can be attributed to novel approaches in the bioprinting of stem cells. There are expansive options in bioprinting technology that have become more refined and specialized over the years, and stem cells address many limitations in cell source, expansion, and development of bioengineered tissue constructs. While bioprinted stem cells present an opportunity to replicate physiological microenvironments with precision, the future of this practice relies heavily on the optimization of the cellular microenvironment. To fabricate tissue constructs that are useful in replicating physiological conditions in laboratory settings, or in preparation for transplantation to a living host, the microenvironment must mimic conditions that allow bioprinted stem cells to proliferate, differentiate, and migrate. The advances of bioprinting stem cells and directing cell fate have the potential to provide feasible and translatable approach to creating complex tissues and organs. This review will examine the methods through which bioprinted stem cells are differentiated into desired cell lineages through biochemical, biological, and biomechanical techniques.

Solid Organ Bioprinting: Strategies to Achieve Organ Function

The field of tissue engineering has advanced over the past decade, but the largest impact on human health should be achieved with the transition of engineered solid organs to the clinic. The number of patients suffering from solid organ disease continues to increase, with over 100 000 patients on the U.S. national waitlist and approximately 730 000 deaths in the United States resulting from end-stage organ disease annually. While flat, tubular, and hollow nontubular engineered organs have already been implanted in patients, in vitro formation of a fully functional solid organ at a translatable scale has not yet been achieved. Thus, one major goal is to bioengineer complex, solid organs for transplantation, composed of patient-specific cells. Among the myriad of approaches attempted to engineer solid organs, 3D bioprinting offers unmatched potential. This review highlights the structural complexity which must be engineered at nano-, micro-, and mesostructural scales to enable organ function. We showcase key advances in bioprinting solid organs with complex vascular networks and functioning microstructures, advances in biomaterials science that have enabled this progress, the regulatory hurdles the field has yet to overcome, and cutting edge technologies that bring us closer to the promise of engineered solid organs.

The Influence of Printing Parameters and Cell Density on Bioink Printing Outcomes

Bioink printability persists as a limiting factor toward many bioprinting applications. Printing parameter selection is largely user-dependent, and the effect of cell density on printability has not been thoroughly investigated. Recently, methods have been developed to give greater insight into printing outcomes. This study aims to further advance those methods and apply them to study the effect of printing parameters (feedrate and flowrate) and cell density on printability. Two printed structures, a crosshatch and five-layer tube, were established as printing standards and utilized to determine the printing outcomes. Acellular bioinks were printed using a testing matrix of feedrates of 37.5, 75, 150, 300, and 600 mm/min and flowrates of 21, 42, 84, 168, and 336 mm³/min. Structures were also printed with cell densities of 5, 10, 20, and 40 × 10⁶ cell/mL at 150 mm/min and 84 mm³/min. Only speed ratios (defined as flowrate divided by feedrate) from 0.07 to 2.24 mm² were suitable for analysis. Increasing speed ratio dramatically increased the height, width, and wall thickness of tubular structures, but did not influence radial accuracy. For crosshatch structures, the area of pores and the frequency of broken filaments were decreased without impacting pore shape (Pr). Within speed ratios, feedrate and flowrate had negligible, inconsistent effects. Cell density did not affect any printing outcomes despite slight rheological changes. Printing outcomes were dominated by the speed ratio, with feedrate, flowrate, and cell density having little impact on printing outcomes when controlling for speed ratio within the ranges tested. The relevance of these results to other bioinks and printing conditions requires continued investigation by the bioprinting community, as well as highlight speed ratio as a key variable to report and suggest that rheology is a more sensitive measure than printing outcomes.

3D Bioprinted Highly Elastic Hybrid Constructs for Advanced Fibrocartilaginous Tissue Regeneration

Advanced strategies to bioengineer a fibrocartilaginous tissue to restore the function of the meniscus are necessary. Currently, 3D bioprinting technologies have been employed to fabricate clinically relevant patient-specific complex constructs to address unmet clinical needs. In this study, a highly elastic hybrid construct for fibrocartilaginous regeneration is produced by co-printing a cell-laden gellan gum/fibrinogen (GG/FB) composite bioink together with a silk fibroin methacrylate (Sil-MA) bioink in an interleaved crosshatch pattern. We characterize each bioink formulation by measuring the rheological properties, swelling ratio, and compressive mechanical behavior. For in vitro biological evaluations, porcine primary meniscus cells (pMCs) are isolated and suspended in the GG/FB bioink for the printing process. The results show that the GG/FB bioink provides a proper cellular microenvironment for maintaining the cell viability and proliferation capacity, as well as the maturation of the pMCs in the bioprinted constructs, while the Sil-MA bioink offers excellent biomechanical behavior and structural integrity. More importantly, this bioprinted hybrid system shows the fibrocartilaginous tissue formation without a dimensional change in a mouse subcutaneous implantation model during the 10-week postimplantation. Especially, the alignment of collagen fibers is achieved in the bioprinted hybrid constructs. The results demonstrate this bioprinted mechanically reinforced hybrid construct offers a versatile and promising alternative for the production of advanced fibrocartilaginous tissue.

Administration of secretome from human placental stem cell-conditioned media improves recovery of erectile function in the pelvic neurovascular injury model

Human placental stem cells (PSCs) enhance histological and functional recovery in a rodent erectile dysfunction (ED) model. We tested the hypothesis that bioactive factors secreted by PSC (i.e., the secretome) mediate functional recovery and that acellular-conditioned media (CM) from PSC culture (PSC-CM) could be used independently to facilitate functional and histological recovery. To identify factors relative to efficacy of PSC, a comparison of CM from PSC and three additional human stem cell populations was performed. CM from human PSC, amniotic fluid stem cells (AFSCs), adipose-derived stem cells (ADSC), and human umbilical vein endothelial cells (HUVECs) was assayed using a semi-quantitative human cytokine antibody array. Male rats, after surgically created ED by neurovascular injury, were randomly divided into four groups: vehicle control (phosphate-buffered saline [PBS]), PSC, PSC-CM, and serum-free media control (SFM) as control. Functional data on intracorporal and mean arterial pressure were obtained, and histological architecture was examined 6 weeks after single injection. PSCs were found to secrete at least 27 cytokines and growth factors at a significantly higher level than the other three cell types. Either single injection of PSC-CM or PSC significantly improved erectile functional recovery and histological architecture compared with SFM or PBS. Injection of the secretome isolated from human PSC improves erectile functional recovery and histological structure in a rat model of neurovascular injury-induced ED. Further characterization of the unique protein expression within the PSC-CM may help to identify the potential for a novel injectable cell-free therapeutic for applicable patients.

Decellularized Skin Extracellular Matrix (dsECM) Improves the Physical and Biological Properties of Fibrinogen Hydrogel for Skin Bioprinting Applications

Full-thickness skin wounds are a significant clinical burden in the United States. Skin bioprinting is a relatively new technology that is under investigation as a new treatment for full-thickness injuries, and development of hydrogels with strong physical and biological characteristics are required to improve both structural integrity of the printed constructs while allowing for a more normal extracellular matrix milieu. This project aims to evaluate the physical and biological characteristics of fibrinogen hydrogel supplemented with decellularized human skin-derived extracellular matrix (dsECM). The hybrid hydrogel improves the cell viability and structural strength of bioprinted skin constructs. Scanning electron microscopy demonstrates that the hybrid hydrogel is composed of both swelling bundles interlocked in a fibrin network, similar to healthy human skin. This hybrid hydrogel has improved rheological properties and shear thinning properties. Extrusion-based printing of the fibrinogen hydrogel + dsECM demonstrates significant improvement in crosshatch pore size. These findings suggest that incorporating the properties of dsECM and fibrinogen hydrogels will improve in vivo integration of the bioprinted skin constructs and support of healthy skin wound regeneration.

The effect of BMP-mimetic peptide tethering bioinks on the differentiation of dental pulp stem cells (DPSCs) in 3D bioprinted dental constructs

The goal of this study was to use 3D bioprinting technology to create a bioengineered dental construct containing human dental pulp stem cells (hDPSCs). To accomplish this, we first developed a novel bone morphogenetic protein (BMP) peptide-tethering bioink formulation and examined its rheological properties, its printability, and the structural stability of the bioprinted construct. Second, we evaluated the survival and differentiation of hDPSCs in the bioprinted dental construct by measuring cell viability, proliferation, and gene expression, as well as histological and immunofluorescent analyses. Our results showed that the peptide conjugation into the gelatin methacrylate-based bioink formulation was successfully performed. We determined that greater than 50% of the peptides remained in the bioprinted construct after three weeks in vitro cell culture. Human DPSC viability was >90% in the bioprinted constructs immediately after the printing process. Alizarin Red staining showed that the BMP peptide construct group exhibited the highest calcification as compared to the growth medium, osteogenic medium, and non-BMP peptide construct groups. In addition, immunofluorescent and quantitative reverse transcription-polymerase chain reaction analyses showed robust expression of dentin sialophosphoprotein and osteocalcin in the BMP peptide dental constructs. Together, these results strongly suggested that BMP peptide-tethering bioink could accelerate the differentiation of hDPSCs in 3D bioprinted dental constructs.

A tissue-engineered uterus supports live births in rabbits

Bioengineered uterine tissue could provide a treatment option for women with uterine factor infertility. In large-animal models, reconstruction of the uterus has been demonstrated only with xenogeneic tissue grafts. Here we use biodegradable polymer scaffolds seeded with autologous cells to restore uterine structure and function in rabbits. Rabbits underwent a subtotal uterine excision and were reconstructed either with autologous cell-seeded constructs, with non-seeded scaffolds, or by suturing. At 6 months post-implantation, only the cell-seeded engineered uteri developed native tissue-like structures, including organized luminal/glandular epithelium, stroma, vascularized mucosa, and two-layered myometrium. Only rabbits with cell-seeded constructs had normal pregnancies (4/10) within the reconstructed segment of the uterus and supported fetal development to term and live birth. With further development, this approach may provide a regenerative medicine solution to uterine factor infertility.

Neural cell integration into 3D bioprinted skeletal muscle constructs accelerates restoration of muscle function

A bioengineered skeletal muscle construct that mimics structural and functional characteristics of native skeletal muscle is a promising therapeutic option to treat extensive muscle defect injuries. We previously showed that bioprinted human skeletal muscle constructs were able to form multi-layered bundles with aligned myofibers. In this study, we investigate the effects of neural cell integration into the bioprinted skeletal muscle construct to accelerate functional muscle regeneration in vivo. Neural input into this bioprinted skeletal muscle construct shows the improvement of myofiber formation, long-term survival, and neuromuscular junction formation in vitro. More importantly, the bioprinted constructs with neural cell integration facilitate rapid innervation and mature into organized muscle tissue that restores normal muscle weight and function in a rodent model of muscle defect injury. These results suggest that the 3D bioprinted human neural-skeletal muscle constructs can be rapidly integrated with the host neural network, resulting in accelerated muscle function restoration.

3D bioprinting of skeletal muscle using primary human muscle progenitor cells results in correct muscle architecture, but functional restoration in rodent models is limited. Here the authors include human neural stem cells into bioprinted skeletal muscle and observe improved architecture and function in vivo.

Assessment methodologies for extrusion-based bioink printability

Extrusion-based bioprinting is one of the leading manufacturing techniques for tissue engineering and regenerative medicine. Its primary limitation is the lack of materials, known as bioinks, which are suitable for the bioprinting process. The degree to which a bioink is suitable for bioprinting has been described as its 'printability.' However, a lack of clarity surrounding the methodologies used to evaluate a bioink's printability, as well as the usage of the term itself, have hindered the field. This article presents a review of measures used to assess the printability of extrusion-based bioinks in an attempt to assist researchers during the bioink development process. Many different aspects of printability exist and many different measurements have been proposed as a consequence. Researchers often do not evaluate a new bioink's printability at all, while others simply do so qualitatively. Several quantitative measures have been presented for the extrudability, shape fidelity, and printing accuracy of bioinks. Different measures have been developed even within these aspects, each testing the bioink in a slightly different way. Additionally, other relevant measures which had little or no examples of quantifiable methods are also to be considered. Looking forward, further work is needed to improve upon current assessment methodologies, to move towards a more comprehensive view of printability, and to standardize these printability measurements between researchers. Better assessment techniques will naturally lead to a better understanding of the underlying mechanisms which affect printability and better comparisons between bioinks. This in turn will help improve upon the bioink development process and the bioinks available for use in bioprinting.

Efficient myotube formation in 3D bioprinted tissue construct by biochemical and topographical cues

Biochemical and biophysical cues directly affect cell morphology, adhesion, proliferation, and phenotype, as well as differentiation; thus, they have been commonly utilized for designing and developing biomaterial systems for tissue engineering applications. To bioengineer skeletal muscle tissues, the efficient and stable formation of aligned fibrous multinucleated myotubes is essential. To achieve this goal, we employed a decellularized extracellular matrix (dECM) as a biochemical component and a modified three-dimensional (3D) cell-printing process to produce an in situ uniaxially aligned/micro-topographical structure. The dECM was derived from the decellularization of porcine skeletal muscles and chemically modified by methacrylate process to enhance mechanical stability. By using this ECM-based material and the 3D printing capability, we were able to produce a cell-laden dECM-based structure with unique topographical cues. The myoblasts (C2C12 cell line) laden in the printed structure were aligned and differentiated with a high degree of myotube formation, owing to the synergistic effect of the skeletal muscle-specific biochemical and topographical cues. In particular, the increase of the gene-expression levels of the dECM structure with topographical cues was approximately 1.5-1.8-fold compared with those of a gelatin methacrylate (GelMA)-based structure with the same topographical cues and a dECM-based structure without topographical cues. According to these in vitro cellular responses, the 3D printed dECM-based structures with topographical cues have the potential for bioengineering functional skeletal muscle tissues, and this strategy can be extended for many musculoskeletal tissues, such as tendons and ligaments and utilized for developing in vitro tissue-on-a-chip models in drug screening and development.

Bioprinted Skin Recapitulates Normal Collagen Remodeling in Full-Thickness Wounds

Over 1 million burn injuries are treated annually in the United States, and current tissue engineered skin fails to meet the need for full-thickness replacement. Bioprinting technology has allowed fabrication of full-thickness skin and has demonstrated the ability to close full-thickness wounds. However, analysis of collagen remodeling in wounds treated with bioprinted skin has not been reported. The purpose of this study is to demonstrate the utility of bioprinted skin for epidermal barrier formation and normal collagen remodeling in full-thickness wounds. Human keratinocytes, melanocytes, fibroblasts, dermal microvascular endothelial cells, follicle dermal papilla cells, and adipocytes were suspended in fibrinogen bioink and bioprinted to form a tri-layer skin structure. Bioprinted skin was implanted onto 2.5 × 2.5 cm full-thickness excisional wounds on athymic mice, compared with wounds treated with hydrogel only or untreated wounds. Total wound closure, epithelialization, and contraction were quantified, and skin samples were harvested at 21 days for histology. Picrosirius red staining was used to quantify collagen fiber orientation, length, and width. Immunohistochemical (IHC) staining was performed to confirm epidermal barrier formation, dermal maturation, vascularity, and human cell integration. All bioprinted skin treated wounds closed by day 21, compared with open control wounds. Wound closure in bioprinted skin treated wounds was primarily due to epithelialization. In contrast, control hydrogel and untreated groups had sparse wound coverage and incomplete closure driven primarily by contraction. Picrosirius red staining confirmed a normal basket weave collagen organization in bioprinted skin-treated wounds compared with parallel collagen fibers in hydrogel only and untreated wounds. IHC staining at day 21 demonstrated the presence of human cells in the regenerated dermis, the formation of a stratified epidermis, dermal maturation, and blood vessel formation in bioprinted skin, none of which was present in control hydrogel treated wounds. Bioprinted skin accelerated full-thickness wound closure by promoting epidermal barrier formation, without increasing contraction. This healing process is associated with human cells from the bioprinted skin laying down a healthy, basket-weave collagen network. The remodeled skin is phenotypically similar to human skin and composed of a composite of graft and infiltrating host cells. Impact statement We have demonstrated the ability of bioprinted skin to enhance closure of full-thickness wounds through epithelialization and normal collagen remodeling. To our knowledge, this article is the first to quantify collagen remodeling by bioprinted skin in full-thickness wounds. Our methods and results can be used to guide further investigation of collagen remodeling by tissue engineered skin products to improve ongoing and future bioprinting skin studies. Ultimately, our skin bioprinting technology could translate into a new treatment for full-thickness wounds in human patients with the ability to recapitulate normal collagen remodeling in full-thickness wounds.