The unseen invaders: Tracking phylogeographic dynamics and genetic diversity of cryptic Pomacea canaliculata and P. maculata (Golden apple snails) across Taiwan

The cryptic invasion of golden apple snails (Pomacea canaliculata and P. maculata) in Taiwan has caused significant ecological and economical damage over the last few decades, however, their management remains difficult due to inadequate taxonomic identification, complex phylogeny, and limited population genetic information. We aim to understand the current distribution, putative population of origin, genetic diversity, and potential path of cryptic invasion of Pomacea canaliculata and P. maculata across Taiwan to aid in improved mitigation approaches. The present investigation conducted a nationwide survey with 254 samples collected from 41 locations in 14 counties or cities across Taiwan. We identified P. canaliculata and P. maculata based on mitochondrial COI and compared their genetic diversity across Taiwan, as well as other introduced and native countries (based on publicly available COI data) to understand the possible paths of invasion to Taiwan. Based on mitochondrial COI barcoding, sympatric and heterogeneous distributions of invasive P. canaliculata and P. maculata were noted. Our haplotype analysis and mismatch distribution results suggested multiple introductions of P. canaliculata in Taiwan was likely originated directly from Argentina, whereas P. maculata was probably introduced from a single, or a few, introduction event(s) from Argentina and Brazil. Our population genetic data further demonstrated a higher haplotype and genetic diversity for P. canaliculata and P. maculata in Taiwan compared to other introduced regions. Based on our current understanding, the establishment of P. canaliculata and P. maculata is alarming and widespread beyond geopolitical borders, requiring a concerted and expedited national and international invasive species mitigation program.

Insight interactions of engineered nanoparticles with aquatic higher plants for phytoaccumulation, phytotoxicity, and phytoremediation applications: A review

With the growing age of human civilization, industrialization has paced up equally which is followed by the innovation of newer concepts of science and technology. One such example is the invention of engineered nanoparticles and their flagrant use in widespread applications. While ENPs serve their intended purposes, they also disrupt the ecological balance by contaminating pristine aquatic ecosystems. This review encompasses a comprehensive discussion about the potent toxicity of ENPs on aquatic ecosystems, with a particular focus on their impact on aquatic higher plants. The discussion extends to elucidating the fate of ENPs upon release into aquatic environments, covering aspects ranging from morphological and physiological effects to molecular-level phytotoxicity. Furthermore, this level of toxicity has been correlated with the determination of competent plants for the phytoremediation process towards the mitigation of this ecological stress. However, this review further illustrates the path of future research which is yet to be explored. Determination of the genotoxicity level of aquatic higher plants could explain the entire process comprehensively. Moreover, to make it suitable to be used in natural ecosystems phytoremediation potential of co-existing plant species along with the presence of different ENPs need to be evaluated. This literature will undoubtedly offer readers a comprehensive understanding of the stress induced by the irresponsible release of engineered nanoparticles (ENP) into aquatic environments, along with insights into the resilience characteristics of these pristine ecosystems.

Potential transmission of SARS-CoV-2 through microplastics in sewage: A wastewater-based epidemiological review

In light of the current COVID-19 pandemic caused by the virus SARS-CoV-2, there is an urgent need to identify and investigate the various pathways of transmission. In addition to contact and aerosol transmission of the virus, this review investigated the possibility of its transmission via microplastics found in sewage. Wastewater-based epidemiological studies on the virus have confirmed its presence and persistence in both influent sewage as well as treated ones. The hypothesis behind the study is that the huge amount of microplastics, especially Polyvinyl Chloride and Polyethylene particles released into the open waters from sewage can become a good substrate and vector for microbes, especially Polyvinyl Chloride and Polyethylene particles, imparting stability to microbes and aiding the "plastisphere" formation. A bibliometric analysis highlights the negligence of research toward plastispheres and their presence in sewage. The ubiquity of microplastics and their release along with the virus into the open waters increases the risk of viral plastispheres. These plastispheres may be ingested by aquatic organisms facilitating reverse zoonosis and the commercial organisms already reported with accumulating microplastics through the food chain poses a risk to human populations as well. Reliance of high population density areas on open waters served by untreated sewage in economically less developed countries might bring back viral transmission.

The role of bacterial exopolysaccharides (EPS) in the synthesis of antimicrobial silver nanomaterials: A state-of-the-art review

The emergence of multi-drug resistant (MDR) pathogens poses a significant global health concern due to the failure of conventional medical treatment. As a result, the development of several metallic (Ag, Au, Zn, Ti, etc.) nanoparticles, has gained prominence as an alternative to conventional antimicrobial therapies. Among these, green-synthesized silver nanoparticles (AgNPs) have gained significant attention due to their notable efficiency and broad spectrum of antimicrobial activity. Bacterial exopolysaccharides (EPS) have recently emerged as a promising biological substrate for the green synthesis of AgNPs. EPS possess polyanionic functional groups (hydroxyl, carboxylic, sulfate, and phosphate) that effectively reduce and stabilize AgNPs. EPS-mediated AgNPs exhibit a wide range of antimicrobial activity against various pathogenic microbes, including Gram-positive and Gram-negative bacteria, as well as fungi. The extraction and purification of bacterial EPS play a vital role in obtaining high-quality and -quantity EPS for industrial applications. This study focuses on the comprehensive methodology of EPS extraction and purification, encompassing screening, fermentation optimization, pretreatment, protein elimination, precipitation, and purification. The review specifically highlights the utilization of bacterial EPS-mediated AgNPs, covering EPS extraction, the synthesis mechanism of green EPS-mediated AgNPs, their characterization, and their potential applications as antimicrobial agents against pathogens. These EPS-mediated AgNPs offer numerous advantages, including biocompatibility, biodegradability, non-toxicity, and eco-friendliness, making them a promising alternative to traditional antimicrobials and opening new avenues in nanotechnology-based approaches to combat microbial infections.

Rice husk biochar - A novel engineered bio-based material for transforming groundwater-mediated fluoride cycling in natural environments

Biochar, a promising carbon-rich and carbon-negative material, can control water pollution, harness the synergy of sustainable development goals, and achieve circular economy. This study examined the performance feasibility of treating fluoride-contaminated surface and groundwater using raw and modified biochar synthesized from agricultural waste rice husk as problem-fixing renewable carbon-neutral material. Physicochemical characterizations of raw/modified biochars were investigated using FESEM-EDAX, FTIR, XRD, BET, CHSN, VSM, pH_pzc, Zeta potential, and particle size analysis were analyzed to identify the surface morphology, functional groups, structural, and electrokinetic behavior. In fluoride (F-) cycling, performance feasibility was tested at various governing factors, contact time (0-120 min), initial F- levels (10-50 mg L^-1), biochar dose (0.1-0.5 g L^-1), pH (2-9), salt strengths (0-50 mM), temperatures (301-328 K), and various co-occurring ions. Results revealed that activated magnetic biochar (AMB) possessed higher adsorption capacity than raw biochar (RB) and activated biochar (AB) at pH 7. The results indicated that maximum F- removal (98.13%) was achieved using AMB at pH 7 for 10 mg L^-1. Electrostatic attraction, ion exchange, pore fillings, and surface complexation govern F- removal mechanisms. Pseudo-second-order and Freundlich were the best fit kinetic and isotherm for F- sorption, respectively. Increased biochar dose drives an increase in active sites due to F- level gradient and mass transfer between biochar-fluoride interactions, which reported maximum mass transfer for AMB than RB and AB. Fluoride adsorption using AMB could be described through chemisorption processes at room temperature (301 K), though endothermic sorption follows the physisorption process. Fluoride removal efficiency reduced, from 67.70% to 53.23%, with increased salt concentrations from 0 to 50 mM NaCl solutions, respectively, due to increased hydrodynamic diameter. Biochar was used to treat natural fluoride-contaminated surface and groundwater in real-world problem-solving measures, showed removal efficiency of 91.20% and 95.61%, respectively, for 10 mg L^-1 F- contamination, and has been performed multiple times after systematic adsorption-desorption experiments. Lastly, techno-economic analysis was analyzed for biochar synthesis and F- treatment performance costs. Overall, our results revealed worth output and concluded with recommendations for future research on F- adsorption using biochar.

New aspects of lipopeptide-incorporated nanoparticle synthesis and recent advancements in biomedical and environmental sciences: a review

The toxicity of metal nanoparticles has introduced promising research in the current scenario since an enormous number of people have been potentially facing this problem in the world. The extensive attention on green nanoparticle synthesis has been focussed on as a vital step in bio-nanotechnology to improve biocompatibility, biodegradability, eco-friendliness, and huge potential utilization in various environmental and clinical assessments. Inherent influence on the study of green nanoparticles plays a key role to synthesize the controlled and surface-influenced molecule by altering the physical, chemical, and biological assets with the provision of various precursors, templating/co-templating agents, and supporting solvents. However, in this article, the dominant characteristics of several kinds of lipopeptide biosurfactants are discussed to execute a critical study of factors affecting synthesis procedure and applications. The recent approaches of metal, metal oxide, and composite nanomaterial synthesis have been deliberated as well as the elucidation of the reaction mechanism. Furthermore, this approach shows remarkable boosts in the production of nanoparticles with the very less employed harsh and hazardous processes as compared to chemical or physical method-based nanoparticle synthesis. This study also shows that the advances in strain selection for green nanoparticle production could be a worthwhile and strong economical approach in futuristic medical science research.

Geogenic contaminants and groundwater quality around Lake Victoria goldfields in northwestern Tanzania

Geogenic contamination of groundwater is frequently associated with gold mining activities and related to drinking water quality problems worldwide. In Tanzania, elevated levels of trace elements (TEs) have been reported in drinking water sources within the Lake Victoria Basin, posing a serious health risk to communities. The present study aims to assess the groundwater quality with a focus on the concentration levels of geogenic contaminants in groundwater around the Lake Victoria goldfields in Geita and Mara districts. The water samples were collected from community drinking water sources and were analysed for physiochemical parameters (pH, EC, Eh), major ions, and trace elements. The analysed major ions included Na⁺, K⁺, Ca²⁺, Mg²⁺, SO₄^2-, HCO₃^- and Cl^- whereas the trace elements were As, Al, Li, Ba, B, Ti, V, U, Zr, Sr, Si, Mn Mo, Fe, Ni, Zn, Cr, Pb, Cd, and V. The present study revealed that the concentration levels of the major ions were mostly within the World Health Organization (WHO) drinking water standards in the following order of their relative abundance; for cations, Ca²⁺∼Na⁺>Mg²⁺>K⁺ and for anions was HCO₃^- > SO₄^2- > NO₃^-, Cl^- > PO₄^3-. Statistical and geochemical modelling software such as 'R Studio', IBM SPSS, geochemical workbench, visual MINTEQ were used to understand the groundwater chemistry and evaluate its suitability for drinking purpose. The concentration of As in groundwater sources varies between below detection limit (bdl) and 300 μg/L, with highest levels in streams followed by shallow wells and boreholes. In approximately 48% of the analysed samples, As concentration exceeded the WHO drinking water guideline and Tanzania Bureau of Standards (TBS) guideline for drinking water value of 10 μg/L. The concentration of the analyzed TEs and mean values of physicochemical parameters were below the guideline limits based on WHO and TBS standards. The Canadian Council of Ministries of the Environment Water Quality Index (CCME WQI) shows that the overall water quality is acceptable with minimum threats of deviation from natural conditions. We recommend further geochemical exploration and the periodic risk assessment of groundwater in mining areas where high levels of As were recorded.

State-of-the-art of research progress on adsorptive removal of fluoride-contaminated water using biochar-based materials: Practical feasibility through reusability and column transport studies

Fluoride (F^-) is one of the essential elements found in soil and water released from geogenic sources and several anthropogenic activities. Fluoride causes fluorosis, dental and skeletal growth problems, teeth mottling, and neurological damage due to prolonged consumption, affecting millions worldwide. Adsorption is an extensively implemented technique in water and wastewater treatment for fluoride, with significant potential due to efficiency, cost-effectiveness, ease of operation, and reusability. This review highlights the current state of knowledge for fluoride adsorption using biochar-based materials and the limitations of biochar for fluoride-contaminated groundwater and industrial wastewater treatment. Biochar materials have shown significant adsorption capacities for fluoride under the influence of low pH, biochar dose, initial concentration, temperature, and co-existing ions. Modified biochar possesses various functional groups (-OH, -CC, -C-O, -CONH, -C-OH, X-OH), in which enhanced hydroxyl (-OH) groups onto the surface plays a significant role in fluoride adsorption via electrostatic attraction and ion exchange. Regeneration and reusability of biochar sorbents need to be performed to a greater extent to improve removal efficiency and reusability in field conditions. Furthermore, the present investigation identifies the limitations of biochar materials in treating fluoride-contaminated drinking groundwater and industrial effluents. The fluoride removal using biochar-based materials at an industrial scale for understanding the practical feasibility is yet to be documented. This review work recommend the feasibility of biochar-based materials in column studies for fluoride remediation in the future.

Global arsenic dilemma and sustainability

Arsenic (As) is one of the most prolific natural contaminants in water resources, and hence, it has been recognized as an emerging global problem. Arsenic exposure through food exports and imports, such as As-contaminated rice and cereal-based baby food, is a potential risk worldwide. However, ensuring As-safe drinking water and food for the globe is still not stated explicitly as a right neither in the United Nations' Universal Declaration of Human Rights and the 2030 Sustainable Development Goals (SDGs) nor the global UNESCO priorities. Despite these omissions, addressing As contamination is crucial to ensure and achieve many of the declared human rights, SDGs, and global UNESCO priorities. An international platform for sharing knowledge, experience, and resources through an integrated global network of scientists, professionals, and early career researchers on multidisciplinary aspects of As research can act as an umbrella covering the activities of UN, UNESCO, and other UN organizations. This can deal with the mitigation of As contamination, thus contributing to global economic development and human health. This article provides a perspective on the global As problem for sustainable As mitigation on a global scale by 2030.

Environmental DNA analysis as an emerging non-destructive method for plant biodiversity monitoring: a review

Environmental DNA (eDNA) analysis has recently transformed and modernized biodiversity monitoring. The accurate detection, and to some extent quantification, of organisms (individuals/populations/communities) in environmental samples is galvanizing eDNA as a successful cost and time-efficient biomonitoring technique. Currently, eDNA's application to plants remains more limited in implementation and scope compared to animals and microorganisms. This review evaluates the development of eDNA-based methods for (vascular) plants, comparing its performance and power of detection with that of traditional methods, to critically evaluate and advise best-practices needed to innovate plant biomonitoring. Recent advancements, standardization and field applications of eDNA-based methods have provided enough scope to utilize it in conservation biology for numerous organisms. Despite our review demonstrating only 13% of all eDNA studies focus on plant taxa to date, eDNA has considerable environmental DNA has considerable potential for plants, where successful detection of invasive, endangered and rare species, and community-level interpretations have provided proof-of-concept. Monitoring methods using eDNA were found to be equal or more effective than traditional methods; however, species detection increased when both methods were coupled. Additionally, eDNA methods were found to be effective in studying species interactions, community dynamics and even effects of anthropogenic pressure. Currently, elimination of potential obstacles (e.g. lack of relevant DNA reference libraries for plants) and the development of user-friendly protocols would greatly contribute to comprehensive eDNA-based plant monitoring programs. This is particularly needed in the data-depauperate tropics and for some plant groups (e.g., Bryophytes and Pteridophytes). We further advocate to coupling traditional methods with eDNA approaches, as the former is often cheaper and methodologically more straightforward, while the latter offers non-destructive approaches with increased discrimination ability. Furthermore, to make a global platform for eDNA, governmental and academic-industrial collaborations are essential to make eDNA surveys a broadly adopted and implemented, rapid, cost-effective and non-invasive plant monitoring approach.

Heavy metals distribution and ecological risk assessment including arsenic resistant PGPR in tidal mangrove ecosystem

Heavy metals (HM) are the major proximate drivers of pollution in the mangrove ecosystem. Therefore, ecological risk (ER) due to HM distribution/concentration in core-sediment of Puzi mangrove region (Taiwan) was examined with tidal influence (TI) along with indigenous rhizospheric bacteria (IRB). The HM concentration was observed higher at active-tidal-sediment compared to partially-active-sediment. Geo-accumulation index (I_geo) and contamination factor (CF) indicated the tidal-sediment was highly contaminated with arsenic (As) and moderately contaminated with Lead (Pb) and Zinc (Zn). However, the pollution loading index (PLI) and degree of contamination (C_d) exhibited 'no pollution' and 'low-moderate degree of contamination', in the studied region respectively. The isolated IRB (Priestia megaterium, Bacillus safenis, Bacillus aerius, Bacillus subtilis, Bacillus velenzenesis, Bacillus lichenoformis, Kocuria palustris, Enterobacter hormaechei, Pseudomonus fulva, and Paenibacillus favisporus; accession number OM979069-OM979078) exhibited the arsenic resistant behavior with plant-growth-promoting characters (IAA, NH₃, and P-solubilization), which can be used in mangrove reforestation and bioremediation of HM.

Spatial variability of the sources and distribution of fluoride in groundwater of the Sanya alluvial plain aquifers in northern Tanzania

Groundwater contamination from geogenic sources poses challenges to many countries, especially in the developing world. In Tanzania, the elevated fluoride (F^-) concentration and related chronic fluorosis associated with drinking F^- rich water are common in the East African Rift Valley regions. In these regions, F^- concentration is space dependence which poses much uncertainty when targeting safe source for drinking water. To account for the spatial effects, integrated exploratory spatial data analysis, regression analysis, and geographical information systems tools were used to associate the distribution of F^- in groundwater with spatial variability in terrain slopes, volcanic deposits, recharge water/vadose materials contact time, groundwater resource development for irrigated agriculture in the Sanya alluvial plain (SAP) of northern Tanzania. The F^- concentration increased with distance from steep slopes where the high scale of variation was recorded in the gentle sloping and flat grounds within the SAP. The areas covered with debris avalanche deposits in the gentle sloping and flat grounds correlated with the high spatial variability in F^- concentration. Furthermore, the high spatial variability in F^- correlated positively with depth to groundwater in the Sanya flood plain. In contrast, a negative correlation between F^- and borehole depth was observed. The current irrigation practices in the Sanya alluvial plain contribute to the high spatial variability in F^- concentration, particularly within the perched shallow aquifers in the volcanic river valleys. The findings of this study are important to the overall chain of safe water supply process in historically fluorotic regions. They provide new insights into the well-known F^- contamination through the use of modern geospatial methods and technologies. In Tanzania's context, the findings can improve the current process of drilling permits issuance by the authority and guide the local borehole drillers to be precise in siting safe source for drinking water.

Fabrication of biochar-based hybrid Ag nanocomposite from algal biomass waste for toxic dye-laden wastewater treatment

Dual functional innovative approaches were developed to tackle the algal scum problem in water by utilizing the algal (Spirogyra sp.) biomass waste for organic dye-laden industrial wastewater treatment, a global problem, and challenge. Therefore, an algal biochar-based nanocomposite (nAgBC) was synthesized and employed as a low-cost adsorbent for Congo red (CR) removal. Surface morphology, physicochemical characteristics, elemental composition, phase, and stability of the nanocomposite was analyzed using BET, FESEM-EDX, FTIR, XRD, XPS, and TGA. The nanocomposite was found to be thermostable, mesoporous with large and heterogeneous surface area, containing nAg as doped material, where -OH, NH, CO, CC, SO, and CH are the surface binding active functional groups. Maximum adsorption efficiency of 95.92% (18 mg L^-1 CR) was achieved (qe = 34.53 mg g^-1) with 0.5 g L^-1 of nanocomposite after 60 min, at room temperature (300 K) at pH 6. Isotherm and kinetic model suggested multilayer chemisorption, where adsorption thermodynamics indicated spontaneous reaction. Fluorescens spectral analysis of CR confirmed the formation of CR supramolecule, supporting enhanced adsorption. Furthermore, the result suggested a 5th cycle reusability and considerable efficacy towards real textile industrial effluents. Synergistic effects of the active surface functional groups of the biochar and nAg, along with the overall surface charge of the composite lead to chemisorption, electrostatic attraction, H-bonding, and surface complexation with CR molecules. Thus, synthesized nAgBC can be applicable to mitigate the wastewater for cleaner production and environment.

Reinforcement of Environmental DNA Based Methods (Sensu Stricto) in Biodiversity Monitoring and Conservation: A Review

Simple Summary

Worldwide biodiversity loss points to a necessity of upgrading to a fast and effective monitoring method that can provide quick conservation action. Newly developed environmental DNA (eDNA) based method found to be more cost-effective, non-invasive, quick, and accurate than traditional monitoring (spot identification, camera trapping). Although the eDNA based methods are proliferating rapidly, as a newly developed branch, it needs more standardization and practitioner adaptation. The present study aims to evaluate the eDNA based methods, and their potential achievements in biodiversity monitoring, and conservation for quick practitioners’ adaption. The investigation shows that the eDNA technique is applicable largely in (i) early detection of invasive species, (ii) species detection for conservation, (iii) community-level biodiversity monitoring, (iv) ecosystem health monitoring, (v) study on trophic interactions, etc. Thus, the eDNA technique shows a great promise with its high accuracy and authenticity, and will be applicable alone or alongside other methods in the near future.

Abstract

Recently developed non-invasive environmental DNA-based (eDNA) techniques have enlightened modern conservation biology, propelling the monitoring/management of natural populations to a more effective and efficient approach, compared to traditional surveys. However, due to rapid-expansion of eDNA, confusion in terminology and collection/analytical pipelines can potentially jeopardize research progression, methodological standardization, and practitioner adoption in several ways. Present investigation reflects the developmental progress of eDNA (sensu stricto) including highlighting the successful case studies in conservation management. The eDNA technique is successfully relevant in several areas of conservation research (invasive/conserve species detection) with a high accuracy and authentication, which gradually upgrading modern conservation approaches. The eDNA technique related bioinformatics (e.g., taxon-specific-primers MiFish, MiBird, etc.), sample-dependent methodology, and advancement of sequencing technology (e.g., oxford-nanopore-sequencing) are helping in research progress. The investigation shows that the eDNA technique is applicable largely in (i) early detection of invasive species, (ii) species detection for conservation, (iii) community level biodiversity monitoring, (iv) ecosystem health monitoring, (v) study on trophic interactions, etc. Thus, the eDNA technique with a high accuracy and authentication can be applicable alone or coupled with traditional surveys in conservation biology. However, a comprehensive eDNA-based monitoring program (ecosystem modeling and function) is essential on a global scale for future management decisions.

A novel BMSN (biologically synthesized mesoporous silica nanoparticles) material: synthesis using a bacteria-mediated biosurfactant and characterization

Mesoporous materials (MMs) have recently been applied as advanced nanomaterials in different fields (separation, catalysis, adsorption etc.). Synthesis of MMs by chemical surfactants is not ecofriendly. This study focused on the biological synthesis of a MM by sol–gel method, using a Bacillus subtilis BBK006-mediated surfactant (template) and a precursor (TEOS). The biologically synthesized mesoporous silica nanoparticles (BMSN) were formed at calcination temperatures of 450–600 °C. The BMSN comprise Si and O elements with specific weights of 56.09% and 42.13% respectively, where the atomic% was detected to be 41.79% and 55.10%, respectively. The phase identity of the synthesized particles (61–300 nm uniform spherical shape; surface area: 8.2616 m² g⁻¹; pore diameter at 550 °C: 14.8516 nm) was confirmed with wide-angle XRD (10°–81°). A typical type IV isotherm was exhibited (BET curves) following IUPAC nomenclature and confirmed the mesoporous nature. The green-synthesized biosurfactant-mediated BMSN is an environmentally promising material to apply in biomedical science (e.g., antimicrobial activity, drug delivery, CMC, anticancer activity) and oil spill management.

Synthesis of a novel BMSN material using bacteria-mediated biosurfactant and their characterization.

Seven potential sources of arsenic pollution in Latin America and their environmental and health impacts

This review presents a holistic overview of the occurrence, mobilization, and pathways of arsenic (As) from predominantly geogenic sources into different near-surface environmental compartments, together with the respective reported or potential impacts on human health in Latin America. The main sources and pathways of As pollution in this region include: (i) volcanism and geothermalism: (a) volcanic rocks, fluids (e.g., gases) and ash, including large-scale transport of the latter through different mechanisms, (b) geothermal fluids and their exploitation; (ii) natural lixiviation and accelerated mobilization from (mostly sulfidic) metal ore deposits by mining and related activities; (iii) coal deposits and their exploitation; (iv) hydrocarbon reservoirs and co-produced water during exploitation; (v) solute and sediment transport through rivers to the sea; (vi) atmospheric As (dust and aerosol); and (vii) As exposure through geophagy and involuntary ingestion. The two most important and well-recognized sources and mechanisms for As release into the Latin American population's environments are: (i) volcanism and geothermalism, and (ii) strongly accelerated As release from geogenic sources by mining and related activities. Several new analyses from As-endemic areas of Latin America emphasize that As-related mortality and morbidity continue to rise even after decadal efforts towards lowering As exposure. Several public health regulatory institutions have classified As and its compounds as carcinogenic chemicals, as As uptake can affect several organ systems, viz. dermal, gastrointestinal, peptic, neurological, respiratory, reproductive, following exposure. Accordingly, ingesting large amounts of As can damage the stomach, kidneys, liver, heart, and nervous system; and, in severe cases, may cause death. Moreover, breathing air with high As levels can cause lung damage, shortness of breath, chest pain, and cough. Further, As compounds, being corrosive, can also cause skin lesions or damage eyes, and long-term exposure to As can lead to cancer development in several organs.

Variety-specific arsenic accumulation in 44 different rice cultivars (O. sativa L.) and human health risks due to co-exposure of arsenic-contaminated rice and drinking water

Arsenic (carcinogenic) is a global health concern due to its presence in groundwater and subsequent accumulation in cultivated-rice via irrigation. The present work focused on the evaluation of arsenic concentration in groundwater, different cultivated-rice varieties (studied together for the first-time) and related health-risks. Arsenic in groundwater (0.26-0.73 mg/L) exceeded the World Health Organization limit for drinking water (0.01 mg/L). Arsenic concentration in rice-grains was found in the range: < 0.0003-2.6 mg/kg dry-weights, where 42 rice varieties (out of total 44) exceeded the Codex Alimentarius Commission limit of polished-rice (0.2 mg/kg). The variety-specific differential-response of arsenic-accumulation was observed (first-time report), where high yielding rice varieties (HYV) were more prone to accumulate arsenic in comparison to local varieties (LV), however, 'Radhunipagol' (an aromatic LV) exhibited as a moderate arsenic-accumulator (BCF = 2.8). The cumulative estimated-daily-intakes (EDI_Cumulative) of arsenic in central-tendency-exposure were observed to be 0.029, 0.031 and 0.04 mg/kg-day among children, teenagers and adults, respectively. The EDI_Cumulative for possible reasonable-maximum-exposure among the above mentioned subpopulation was 0.038, 0.04 and 0.05 mg/kg-day, respectively. The evaluated Cumulative Hazard Index and Individual Excess Lifetime Cancer Risk values suggested that the studied population is under extremely severe cancerous and noncancerous risks to arsenic co-exposures via drinking water and rice.

Advanced application of nano-technological and biological processes as well as mitigation options for arsenic removal

Arsenic (As) removal is a huge challenge, since several million people are potentially exposed (>10 μg/L World Health Organization guideline limit) through As contaminated drinking water worldwide. Review attempts to address the present situation of As removal, considering key topics on nano-technological and biological process and current progress and future perspectives of possible mitigation options have been evaluated. Different physical, chemical and biological methods are available to remove As from contaminated water/soil/wastes, where removal efficiency mainly depends on absorbent type, initial adsorbate concentration, speciation and interfering species. Oxidation is an important pretreatment step in As removal, which is generally achieved by several media such as O₂/O₃, HClO, KMnO₄ and H₂O₂. The Fe-based-nanomaterials (α/β/γ-FeOOH, Fe₂O₃/Fe₃O₄-γ-Fe₂O₃), Fe-based-composite-compounds, activated-Al₂O₃, HFO, Fe-Al₂O₃, Fe₂O₃-impregnated-graphene-aerogel, iron-doped-TiO₂, aerogel-based- CeTiO₂, and iron-oxide-coated-manganese are effective to remove As from contaminated water. Biological processes (phytoremediation/microbiological) are effective and ecofriendly for As removal from water and/or soil environment. Microorganisms remove As from water, sediments and soil by metabolism, detoxification, oxidation-reduction, bio-adsorption, bio-precipitation, and volatilization processes. Ecofriendly As mitigation options can be achieved by utilizing an alternative As-safe-aquifer, surface-water or rainwater-harvesting. Application of hybrid (biological with chemical and physical process) and Best-Available-Technologies (BAT) can be the most effective As removal strategy to remediate As contaminated environments.

Spatial dependency of arsenic, antimony, boron and other trace elements in the shallow groundwater systems of the Lower Katari Basin, Bolivian Altiplano

Spatial patterns, cluster or dispersion trends are statistically different from random patterns of trace elements (TEs), which are essential to recognize, e.g., how they are distributed and change their behavior in different environmental processes and/or in the polluted/contaminated areas caused by urban and industrial pollutant located in upstream basins and/or by different natural geological conditions. The present study focused on a statistical approach to obtain the spatial variability of TEs (As, B and Sb) in shallow groundwater (GW) in a high-altitude arid region (Lower Katari Basin, Bolivian Altiplano), using multivariate analysis (PCA and HCA), geochemical modeling (PHREEQC, MINTEQ) and spatial analyses (Moran's I and LISA), considering the community supply wells. The results indicate that despite of the outliers there is a good autocorrelation in all cases, since Moran's I values are positive. The global spatial dependence analysis indicated a positive and statistically significant spatial autocorrelation (SA) for all cases and TEs are not randomly distributed at 99% confidence level. The results of hydrochemical modeling suggested the precipitation and stability of Fe (III) phases such as goethite. The re-adsorption of As and Sb on the mineral surface in the aquifer could be limiting the concentrations of both metalloids in southern regions. Spatial autocorrelation was positive (High-High) in northwestern (arsenic), southeastern (boron) and northeastern (antimony) region. The results reflected that the As and Sb are the main pollutants linked to the natural geological conditions, but B is a main pollutant due to the anthropogenic activities. Furthermore, >50% shallow groundwater exceeded the WHO limit and NB-512 guideline values for Sb (87%), B (56%) and As (50%); therefore the spatial distribution and concentrations of these TEs in GW raise a significant concern about drinking water quality in the study area.

Variation of Microbial Diversity in Catastrophic Oil Spill Area in Marine Ecosystem and Hydrocarbon Degradation of UCMs (Unresolved Complex Mixtures) by Marine Indigenous Bacteria

The study targeted an assessment of microbial diversity during oil spill in the marine ecosystem (Kaohsiung port, Taiwan) and screened dominant indigenous bacteria for oil degradation, as well as UCM weathering. DO was detected lower and TDS/conductivity was observed higher in oil-spilled area, compared to the control, where a significant correlation (R² = 1; P < 0.0001) was noticed between DO and TDS. The relative abundance (RA) of microbial taxa and diversities (> 90% similarity by NGS) were found higher in the boundary region of spilled-oily-water (site B) compared to the control (site C) and center of the oil spill area (site A) (B_RA/diversity > C_RA/diversity > A_RA/diversity). The isolated indigenous bacteria, such as Staphylococcus saprophyticus (CYCTW1), Staphylococcus saprophyticus (CYCTW2), and Bacillus megaterium (CYCTW3) degraded the C₁₀-C₃₀ including UCM of oil, where Bacillus sp. are exhibited more efficient, which are applicable for environmental cleanup of the oil spill area. Thus, the marine microbial diversity changes due to oil spill and the marine microbial community play an important role to biodegrade the oil, besides restoring the catastrophic disorders through changing their diversity by ecological selection and adaptation process.

The removal of arsenic from arsenic-bearing groundwater in In-situ and Ex-situ environment using novel natural magnetic rock material and synthesized magnetic material as adsorbent: A comparative assessment

The removal of arsenic from groundwater is an important issue for environmental safety and human health. Research focused on the comparative assessment of arsenic removal from arsenic-bearing groundwater and arsenic-containing-synthetic water (2 mg/L) using natural magnetic material (NMM) (rock) and synthesized magnetic material (SMM) by Bacillus pasteurii and humic acid. The arsenic-bearing groundwater (97.56 ± 0.05 μg/L) exceed the WHO limit (10 μg/L) of arsenic concentration for drinking water. The NMM contains dominantly magnetite, hematite, ferrihydrate, coesite, quartz, and stishovite. The NMM of natural rock exhibited the existence of iron (6.25-8.86% Fe₃O₄), which is widespread and important component in sedimentary rocks. The investigation on vibrating sample magnetometers (VSM) of NMM and SMM demonstrated the typical magnetization properties, which can be separated after arsenic removal process. The thermogravimetric analysis (TGA) of SMM displayed the existence of organic matter decomposition during particle synthesis. The TEM and SEM exhibited the nanoparticle particle formation within the range of 10-39 nm (10-20 nm particle Fe₃O₄ through B. pasteurii). FTIR spectrum (before and after removal of arsenic) indicated the existence and binding nature in between arsenic and iron. >90% of arsenic was removed from arsenic-bearing groundwater using Fe₃O₄, Fe₃O₄ (N₂-Environment), Fe₃O₄ with humic acid, and Fe₃O₄ with B. pasteurii after 25 min, 8 min, 13 min and 120 min, respectively. In case of NMM in Site-A, the arsenic removal was observed very fast as 85-87% within 30 s, whereas 95-99%, 93-95% and 88-91% removal detected using the sample of Site-A, Site-B, and Site-C respectively, after 120 min at natural pH (8.31 ± 0.05) of arsenic-bearing groundwater. Thus, NMM, (ecofriendly green material), can be applicable for arsenic removal from arsenic-bearing groundwater.

Green technological approach to synthesis hydrophobic stable crystalline calcite particles with one-pot synthesis for oil-water separation during oil spill cleanup

The process of separating oil and water from oil/water mixtures is an attractive strategy to answer the menace caused by industrial oil spills and oily wastewater. In addition, water coproduced during hydrocarbon exploitation, which can be an economic burden and risk for freshwater resources, can become an important freshwater source after suitable water-oil separation. For oil-water separation purposes, considerable attention has been paid to the preparation of hydrophobic-oleophilic materials with modified surface roughness. However, due to issues of thermodynamic instability, costly and complex methods as well as lack of ecofriendly compounds, most of hydrophobic surface modified particles are of limited practical application. The study presents a facile procedure, to synthesize crystalline particles of calcite, which is the most stable polymorph of CaCO₃ from industrial CaCO₃ using oleic acid as an additive in a one-pot synthesis method. The XRD results show that the synthesized particles were a well-crystallized form of calcite. The FTIR results reflect the appearance of the alkyl groups from the oleic acid in synthesized particles which promotes the production of calcite with 'rice shape' (1.64 μm) (aggregated by spherical nanoparticle of 19.56 nm) morphology with concomitant changes in its surface wettability from hydrophilic to hydrophobic. The synthesized particles exhibited near to super hydrophobicity with ∼99% active ratio and a contact angle of 143.8°. The synthesized hydrophobic calcite particles had an oleophilic nature where waste diesel oil adsorption capacity of synthesized calcium carbonate (HCF) showed a very high (>99%) and fast (7 s) oil removal from oil-water mixture. The functional group of long alkyl chain including of CO bounds may play critical roles for adsorption of diesel oils. Moreover, the thermodynamically stable crystalline polymorph calcite (compared to vaterite) exhibited excellent recyclability. The isothermal study reflects the comparatively high value of correlation coefficient (R² = 0.94) for the Langmuir isotherm compared to those of the Freundlich isotherm (R² = 0.82) showed that the adsorption of diesel oil onto the hydrophobic CaCO₃ adsorbent was much better described by the Langmuir isotherm. The kinetics study of second-order rate expression (R² = 0.99) more fitted with the experimental data compare to first-order model (R² = 0.92). The synthesized calcite exhibited a significant dual oleophilic and hydrophobic nature that can be applicable for oil adsorption/or removal purpose in oil contaminated areas in environment and/or industrial oily wastewater for green, simple, and inexpensive environmental cleanup.

Medical geology in the framework of the sustainable development goals

Exposure to geogenic contaminants (GCs) such as metal(loid)s, radioactive metals and isotopes as well as transuraniums occurring naturally in geogenic sources (rocks, minerals) can negatively impact on environmental and human health. The GCs are released into the environment by natural biogeochemical processes within the near-surface environments and/or by anthropogenic activities such as mining and hydrocarbon exploitation as well as exploitation of geothermal resources. They can contaminate soil, water, air and biota and subsequently enter the food chain with often serious health impacts which are mostly underestimated and poorly recognized. Global population explosion and economic growth and the associated increase in demand for water, energy, food, and mineral resources result in accelerated release of GCs globally. The emerging science of "medical geology" assesses the complex relationships between geo-environmental factors and their impacts on humans and environments and is related to the majority of the 17 Sustainable Development Goals in the 2030 Agenda of the United Nations for Sustainable Development. In this paper, we identify multiple lines of evidence for the role of GCs in the incidence of diseases with as yet unknown etiology (causation). Integrated medical geology promises a more holistic understanding of the occurrence, mobility, bioavailability, bio-accessibility, exposure and transfer mechanisms of GCs to the food-chain and humans, and the related ecotoxicological impacts and health effects. Scientific evidence based on this approach will support adaptive solutions for prevention, preparedness and response regarding human and environmental health impacts originating from exposure to GCs.

Benthic macroalgae as biological indicators of heavy metal pollution in the marine environments: a biomonitoring approach for pollution assessment

Metal pollution in the marine coastline environment is an important topical issue in the context of ecological disturbance and climate change. Heavy metal contaminations (Cd, Cr, Cu, Mn, Ni, Pb and Zn) in seawater and surficial sediments, as well as macroalgal diversity, were determined in six different locations along the coast of the Gulf of Kutch in India. The marine coastline environment was found to be enriched with Cd and Zn in comparison to other metals. Significant (p ≤ 0.05) inter-elemental positive-correlations were observed between Fe-Mn, Fe-Cu, Fe-Cr, Fe-Zn, Cr-Cu, Cu-Mn, and Cd-Zn, as well as negative-correlations between Cd-Pb, Ni-Pb, and Zn-Pb. Though genus specific macroalgal responses to heavy metal accumulation were significant, species specific response was insignificant (p ≤ 0.05). The relative abundance of metals in macroalgae followed the order of Fe>Zn>Mn>Cu>Cd>Cr>Ni>Pb. The high uptake of metals in green algae (Ulva lactuca and Enteromorpha intestinalis) and brown algae (Padina gymnospora and Dictyota bartayresiana) suggested that these algae may be used as potential biomonitors for heavy metal pollution. Three pollution indicators, Contamination Factor (CF), Enrichment Factor (EF) and Geochemical Index (Igeo) were calculated to determine the degree of metal pollution in the marine coastline and the contribution of anthropogenic influence.

Identification and discrimination of bacteria using Fourier transform infrared spectroscopy

Bacterial spectra were obtained in the wavenumber range of 4000-600 cm(-1) using FTIR spectroscopy. FTIR spectral patterns were analyzed and matched with 16S-rRNA signatures of bacterial strains OS1 and OS2, isolated from oil sludge. Specific spectral bands obtained from OS1 (FJ226761), reference strain Bacillus flexus (ATCC 49095), OS2 (FJ215874) and reference strain Stenotrophomonas maltophilia (ATCC 19861) respectively, suggested that OS1 and ATCC 49095 were closely related whereas OS2 was different. The bands probably represent groups of proteins and lipids of specific bacteria. Separate peaks found in B. flexus were similar to those of OS1. The S. maltophilia (ATCC 19861) and OS2 exhibited a similar peak at 3272 cm(-1). Amide bands (I, II and III) exhibited that OS1 and B. flexus were closely related, but were different from OS2. In the fingerprint region, peak at 1096 cm(-1) and 1360 cm(-1) exhibited the specific fingerprints of OS2 and reference strain S. maltophilia (ATCC 19861), respectively. The specific fingerprint signature was found at 1339 cm(-1) for OS1 and at 1382 cm(-1) for B. flexus ATCC 49095, allowing these two strains of B. flexus to be differentiated. This spectral signature originated from phospholipid and RNA components of the cell. Principle components analysis (PCA) of spectral regions exhibited with distinct sample clusters between Bacillus flexus (ATCC 49095), S. maltophilia (ATCC 19861), OS1 and OS2 in amide and fingerprint region.

Arsenic mineral dissolution and possible mobilization in mineral-microbe-groundwater environment

Arsenic (As) is widely distributed in the nature as ores or minerals. It has been attracted much attention for the global public health issue, especially for groundwater As contamination. The aim of this study was to elucidate the characteristics of microbes in groundwater where As-minerals were dissolved. An ex situ experiment was conducted with 7 standard As-minerals in bacteria-free groundwater and stored in experimental vessels for 1 year without supplementary nutrients. The pH (6.7-8.4) and EhS.H.E. (24-548 mV) changed between initial (0 day) and final stages (365 days) of experiment. The dissolution of As was detected higher from arsenolite (4240 ± 8.69 mg/L) and native arsenic (4538 ± 9.02 mg/L), whereas moderately dissolved from orpiment (653 ± 3.56 mg/L) and realgar (319 ± 2.56 mg/L) in compare to arsenopyrite (85 ± 1.25mg/L) and tennantite (3 ± 0.06 mg/L). Optical microscopic, scanning electron microscopic observations and flurometric enumeration revealed the abundance of As-resistant bacillus, coccus and filamentous types of microorganisms on the surface of most of As-mineral. 4'-6-Diamidino-2-phenylindole (DAPI)-stained epifluorescence micrograph confirmed the presence of DNA and carboxyfluorescein diacetate (CFDA) staining method revealed the enzymatically active bacteria on the surface of As-minerals such as in realgar (As4S4). Therefore, the microbes enable to survive and mobilize the As in groundwater by dissolution/bioweathering of As-minerals.

Naturally occurring arsenic in terrestrial geothermal systems of western Anatolia, Turkey: potential role in contamination of freshwater resources

Arsenic (As) contamination in terrestrial geothermal systems has been identified in many countries worldwide. Concentrations higher than 0.01 mg/L are detrimental to human health. We examined potential consequences for As contamination of freshwater resources based on hydrogeochemical investigations of geothermal waters in deep wells and hot springs collected from western Anatolia, Turkey. We analyzed samples for major ions and trace element concentrations. Temperature of geothermal waters in deep wells showed extreme ranges (40 and 230 °C), while, temperature of hot spring fluids was up to 90 °C. The Piper plot illustrated two dominant water types: Na-HCO3(-) type for geothermal waters in deep wells and Ca-HCO3(-) type for hot spring fluids. Arsenic concentration ranged from 0.03 to 1.5mg/L. Dominance of reduced As species, i.e., As(III), was observed in our samples. The Eh value ranged between -250 and 119 mV, which suggests diverse geochemical conditions. Some of the measured trace elements were found above the World Health Organization guidelines and Turkish national safe drinking water limits. The variation in pH (range: 6.4-9.3) and As in geothermal waters suggest mixing with groundwater. Mixing of geothermal waters is primarily responsible for contamination of freshwater resources and making them unsuitable for drinking or irrigation.

Removal of Cu, Pb and Zn by foam fractionation and a soil washing process from contaminated industrial soils using soapberry-derived saponin: a comparative effectiveness assessment

The feasibility of using the eco-friendly biodegradable surfactant saponin (a plant-based surfactant) from soapberry and surfactin from Bacillus subtilis (BBK006) for the removal of heavy metals from contaminated industrial soil (6511mgkg(-1) copper, 4955mgkg(-1) lead, and 15090mgkg(-1) zinc) by foam fractionation and a soil flushing process was evaluated under variation of fundamental factors (surfactant concentration, pH, temperature and time). The results of latter process showed that 1-2% Pb, 16-17% Cu and 21-24% Zn was removed by surfactin after 48h, whereas the removal of Pb, Cu and Zn was increased from 40% to 47%, 30% to 36% and 16% to 18% in presence of saponin with an increase from 24 to 72h at room temperature by the soil washing process at pH 4. In the foam fractionation process, the metal removal efficiencies were increased with increases in the saponin concentration (0.075-0.15gL(-1)) and time (24-72h), whereas the efficiency was decreased with increasing pH (4-10) and temperature (>40°C). The removal efficiencies of Pb, Cu and Zn were increased significantly from 57% to 98%, 85% to 95% and 55% to 56% with an increase in the flow rate from 0.2 to 1.0Lmin(-1) at 0.15gL(-1) saponin (pH 4 and 30°C). The present investigation indicated that the foam fractionation process is more efficient for the removal of heavy metal from contaminated industrial soil in comparison to the soil washing process. The plant-based eco-friendly biodegradable biosurfactant saponin can be used for environmental cleanup and pollution management.

Evaluation of remediation process with soapberry derived saponin for removal of heavy metals from contaminated soils in Hai-Pu, Taiwan

The use of a biodegradable natural plant-based surfactant extracted from soapberry is proposed for the remediation of Ni, Cr and Mn from industrial soil site in Hai-Pu, Taiwan. Batch experiments were performed under variation of fundamental factors (saponin concentration, pH, and incubation time) for metal remediation. Removal of Ni and Mn were increased with increasing saponin concentration (0.015-0.150 g/L), whereas the removal of Cr was increased upto 0.075 g/L saponin. The Ni, Cr and Mn were removed significantly (p < or = 0.05) at near to the neutral and slightly acidic (pH 5 to 8) conditions. Removal efficiency of Ni (99%) from the soil was found to be greater than that of Cr (73%) or Mn (25%) in the presence of saponin at a concentration of 0.150 g/L at pH 5. The removal percentage increased with incubation time where the removal of Ni was faster than that of Cr and Mn. The result indicates the feasibility of eco-friendly removal of heavy metal (Ni, Cr and Mn) from industrial soil by soil washing process in presence of plant derived saponin.

WITHDRAWN: Deposition and uptake of metals in urban canopy: Atmospheric arsenic sequestration

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Arsenic-induced health crisis in peri-urban Moyna and Ardebok villages, West Bengal, India: an exposure assessment study

Drinking of arsenic (As)-contaminated groundwater has adverse effects on health of millions of people worldwide. This study aimed to determine the degree of severity of As exposure from drinking water in peri-urban Moyna and Ardebok villages, West Bengal, India. Arsenic concentrations in hair, nail and urine samp les of the individuals were determined. Arsenical dermatosis, keratosis and melanosis were investigated through medical evaluation. We have evaluated the association between As exposure from drinking water, and keratosis and melanosis outcomes. The results showed that 82.7 % of the sampled tube wells contain As concentrations above 10 μg/L, while 57.7 % contain As concentrations above 50 μg/L. The hair, nail and urine As concentrations were positively correlated with As concentrations in drinking water. In our study population, we observed a strong association between As concentrations ranging 51-99 μg/L and keratosis and melanosis outcomes, although the probability decreases at higher concentration ranges perhaps due to switching away from the use of As-contaminated tube wells for drinking and cooking purposes. High As concentrations in hair, nail and urine were observed to be associated with the age of the study population. The level of As concentrations in hair, nail and urine samples of the study population indicated the degree of severity of As exposure in the study region.

Synthesis of brushite particles in reverse microemulsions of the biosurfactant surfactin

In this study the "green chemistry" use of the biosurfactant surfactin for the synthesis of calcium phosphate using the reverse microemulsion technique was demonstrated. Calcium phosphates are bioactive materials that are a major constituent of human teeth and bone tissue. A reverse microemulsion technique with surfactin was used to produce nanocrystalline brushite particles. Structural diversity (analyzed by SEM and TEM) resulted from different water to surfactin ratios (W/S; 250, 500, 1000 and 40,000). The particle sizes were found to be in the 16-200 nm range. Morphological variety was observed in the as-synthesized microemulsions, which consisted of nanospheres (~16 nm in diameter) and needle-like (8-14 nm in diameter and 80-100 nm in length) noncalcinated particles. However, the calcinated products included nanospheres (50-200 nm in diameter), oval (~300 nm in diameter) and nanorod (200-400 nm in length) particles. FTIR and XRD analysis confirmed the formation of brushite nanoparticles in the as-synthesized products, while calcium pyrophosphate was produced after calcination. These results indicate that the reverse microemulsion technique using surfactin is a green process suitable for the synthesis of nanoparticles.

Low-temperature synthesis of rose-like ZnO nanostructures using surfactin and their photocatalytic activity

Rose-like ZnO nanostructures were synthesized by the precipitation method using a biosurfactant (surfactin) as a templating-agent stabilizer. The concentration of surfactin in the precursor solution significantly influenced the thickness and density of the petals in the rose-like structures, and all samples were of a wurtzite phase. The thickness of the petal was found to decrease with increasing surfactin concentration. The average thickness of the petals was found to be between 10 and 13 nm. Photocatalytic degradation of methylene blue using rose-like ZnO nanostuctures was investigated, and the morphology, density and thickness of the ZnO petals were found to influence the photodegradation activity. The samples with loosely-spread petals, or plate-like ZnO structures, brought about the strongest photodegradation in comparison with the dense rose-like structures. The greater activity of the loose-petal structures was correlated with their higher absorption in the UV region in comparison with the other samples. The ZnO samples prepared using low surfactin concentrations had higher rate constant values, i.e., 9.1 x 10(-3) min(-1), which revealed that the photodegradation of methylene blue under UV irradiation progressed by a pseudo first-order kinetic reaction.

Biogeochemical characteristics of Kuan-Tzu-Ling, Chung-Lun and Bao-Lai hot springs in southern Taiwan

Hot springs are the important natural sources of geothermally heated groundwater from the Earth's crust. Kuan-Tzu-Ling (KTL), Chung-Lun (CL) and Bao-Lai (BL) are well-known hot springs in southern Taiwan. Fluid and mud (sediments) samples were collected from the eruption points of three hot springs for detailed biogeochemical characterization. The fluid sample displays relatively high concentrations of Na(+) and Cl(-) compared with K(+), Mg(2+), Ca(2+), NO(2) (-), and SO(4) (2-), suggesting a possible marine origin. The concentrations of Fe, Cr, Mn, Ni, V and Zn were significantly higher in the mud sediments compared with fluids, whereas high concentrations of As, Ba, Cu, Se, Sr and Rb were observed in the fluids. This suggests that electronegative elements were released during sediment-water interactions. High As concentration in the fluids was observed to be associated with low redox (Eh) conditions. The FTIR spectra of the humic acid fractions of the sediments showed the presence of possible functional groups of secondary amines, ureas, urethanesm (amide), and silicon. The sulfate-reducing deltaproteobacterium 99% similar to Desulfovibrio psychrotolerans (GU329907) were rich in the CL hot spring while mesophilic, proteolytic, thiosulfate- and sulfur-reducing bacterium that 99% similar to Clostridium sulfidigenes (GU329908) were rich in the BL hot spring.

The potential for reductive mobilization of arsenic [As(V) to As(III)] by OSBH(2) (Pseudomonas stutzeri) and OSBH(5) (Bacillus cereus) in an oil-contaminated site

Microbial reduction of arsenate [As(V)] plays an important role in arsenic (As) mobilization in aqueous environments. In this study, we investigated reduction of arsenate by different bacterial isolates such as OSBH(1) (GU329913), OSBH(2) (GU329914), OSBH(3) (GU329915), OSBH(4) (GU329916) and OSBH(5) (GU329917), isolated from the oil sludge of a sewage treatment plant operated by the China Petroleum Refinery Company in Kaohsiung, southern Taiwan. Bacterial strains of pure culture were identified by 16S rRNA analysis (≥99 % nucleotide similarity). Morphological and 16S rRNA analysis show that the isolate OSBH(1) is similar to E. coli, OSBH(2) is similar to P. stutzeri, OSBH(3) is similar to P. putida, OSBH(4) is similar to P. aeruginosa, and OSBH(5) is similar to B. Cereus. The As(V) was transformed to As(III) in the presence of isolates OSBH(2) and OSBH(5) by a detoxification process. The potential reduction rates of As(V) were higher in the presence of isolate OSBH(5) compared to the isolate OSBH(2). The microbial growth (cell/mL) of isolate OSBH(5) was significantly higher in culture medium compared to OSBH(2). The bacterial isolates such as OSBH(1), OSBH(3) and OSBH(4) were found to be incapable of transforming the As(V). It is concluded that the activity of the oil-degrading bacterial isolates described in this work contributes to the mobilization of As in the more toxic As(III) form that affects biotic life.

Arsenic-enriched groundwaters of India, Bangladesh and Taiwan--comparison of hydrochemical characteristics and mobility constraints

Arsenic (As) enrichment in groundwater has become a major global environmental disaster. Groundwater samples were collected from 64 sites located in the districts of 24-Parganas (S), and Nadia in West Bengal, India (Bhagirathi sub-basin), and 51 sites located in the districts of Comilla, Noakhali, Magura, Brahman baria, Laxmipur, Munshiganj, Faridpur and Jhenaida in Bangladesh (Padma-Meghna sub-basin). Groundwater samples were also collected from two As-affected areas (Chianan and Lanyang plains) of Taiwan (n = 26). The concentrations of major solutes in groundwater of the Padma-Meghna sub-basin are more variable than the Bhagirathi sub-basin, suggesting variations in the depositional and hydrological settings. Arsenic concentrations in groundwaters of the studied areas showed large variations, with mean As concentrations of 125 μg/L (range: 0.20 to 1,301 μg/L) in Bhagirathi sub-basin, 145 μg/L (range: 0.20 to 891 μg/L) in Padma-Meghna sub-basin, 209 μg/L (range: 1.3 to 575 μg/L) in Chianan plain, and 102 μg/L (range: 2.5 to 348 μg/L) in Lanyang plain groundwater. The concentrations of Fe, and Mn are also highly variable, and are mostly above the WHO-recommended guideline values and local (Indian and Bangladeshi) drinking water standard. Piper plot shows that groundwaters of both Bhagirathi and Padma-Meghna sub-basins are of Ca-HCO(3) type. The Chianan plain groundwaters are of Na-Cl type, suggesting seawater intrusion, whereas Lanyang plain groundwaters are mostly of Na-HCO(3) type. The study shows that reductive dissolution of Fe(III)-oxyhydroxides is the dominant geochemical process releasing As from sediment to groundwater in all studied areas.

Role of organic matter and humic substances in the binding and mobility of arsenic in a Gangetic aquifer

Arsenic (As) enrichment in groundwater has led to extensive research, particularly on the factors responsible for its release into groundwater. In the Gangetic plain, organic matter driven microbial reduction of Fe-oxyhydroxides is considered as the most plausible mechanism of As release into groundwater. However, the role of organic matter in the aqueous environment is not well known and particularly that of organometallic complex. In this study, we have characterized bulk sediment and groundwater samples, collected from Barasat, West Bengal, India, to understand the effect of organic matter in the binding and mobility of As in the subsurface environment. The results showed a moderate correlation (R(2) = 0.49, p < 0.05) between dissolved organic carbon (DOC) and As in groundwater, suggesting that DOC has a role in releasing As into groundwater. The relative fluorescent intensity (RFI) of the dissolved humic substances in groundwater showed a maximum value of 65 QSU (mean: 47 ± 8 QSU). FT-IR spectra of the extracted humic acid fractions of the sediment showed COO-, C = O, OH, and C = C (aromatic ring) functional groups, which may act as a chelating agents with the metal(loid)s. FT-IR spectra of the HA-As complex exhibited specific peaks at 1242 and 832 cm(-1) in the fingerprint region. This is similar to the extracted humic acid fractions of the Gangetic sediment, suggesting binding of As with humic substances.

Health risks for human intake of aquacultural fish: Arsenic bioaccumulation and contamination

Aquacultural tilapia (Oreochromis mossambicus L.) and shrimp (Penaeus monodon L.) from groundwater-cultured ponds in southwestern Taiwan were analyzed to estimate arsenic (As) bioaccumulation and the potential health risk to human intake. Most of aquacultural ponds exhibited higher arsenic than maximum allowed concentrations (50 μg L(-1)) in pond water of Taiwan. Arsenic levels in tilapia in Budai, Yichu and Beimen were 0.92 ± 0.52 μg g(-1), 0.93 ± 0.19 μg g(-1) and 0.76 ± 0.03 μg g(-1), respectively and in shrimp was 0.36 ± 0.01 μg g(-1) in Beimen. Total arsenic in tilapia is highly correlated (R(2) = 0.80) with total arsenic concentration of pond water. Total arsenic in fish showed high correlation with that in bone (R(2) = 0.98), head (R(2) = 0.97) and tissue (R(2) = 0.96). Organic arsenic species (DMA) was found higher relative to inorganic species of As(III) and As(V). The average percent contribution of inorganic arsenic to total arsenic in fish samples was 12.5% and ranged between 11.7 to 14.2%. Bioaccumulation factors (BAFs) for total arsenic in fish ranged from 10.3 to 22.1, whereas BAF for inorganic arsenic ranged from 1.33 to 2.82. The mean human health cancer risk associated with the ingestion of inorganic arsenic in the fish was estimated at 2.36 × 10(-4) ± 0.99 × 10(-4), which is over 200 times greater than a de Minimus cancer risk of 1 × 10(-6). The mean human health hazard quotient associated with ingesting inorganic arsenic in the fish was 1.22 ± 0.52, indicating that expected human exposure exceeds the reference dose for non-cancer health effects by 22%. These results suggest that the inhabitants in this region are being subjected to moderately elevated arsenic exposure through the consumption of tilapia and shrimp raised in aquaculture ponds.

Biogeochemical interactions among the arsenic, iron, humic substances, and microbes in mud volcanoes in southern Taiwan

Fluid and mud samples collected from Hsiaokunshui (HKS), Wushanting (WST), Yenshuikeng (YSK), Kunshuiping (KSP), Liyushan (LYS), and Sinyangnyuhu (SYNH) mud volcanoes of southwestern Taiwan were characterized for major ions, humic substances (HS) and trace elements concentrations. The relationship between the release of arsenic (As) and activities of sulfate-reducing bacteria has been assessed to understand relevant geochemical processes in the mud volcanoes. Arsenic (0.02-0.06 mg/L) and humic substances (4.13 × 10(-4) to 1.64 × 10(-3) mM) in the fluids of mud volcanoes showed a positive correlation (r = 0.99, p < 0.05) except in Liyushan mud volcano. Arsenic and iron in mud sediments formed two separate groups i) high As, but low Fe in HKS, WST, and SYNH; and ii) low As, but high Fe in the YSK, KSP, and LYS mud volcanoes. The Eh(S.H.E.) values of the mud volcano liquids were characterized by mild to strongly reducing conditions. The HKS, SYNH, and WST mud volcanoes (near the Chishan Fault) belongs to strong reducing environment (-33 to -116 mV), whereas the LYS, YSK, and KSP mud volcanoes located near the coastal plain are under mild reducing environment (-11 to 172 mV). At low Eh values mud volcanoes, saturation index (SI) values of poorly crystalline phases such as amorphous ferric hydroxide indicate understaturation, whereas saturation is reached in relatively high Eh(S.H.E.) values mud volcanoes. Arsenic contents in sediments are low, presumably due to its release to fluids (As/Fe ratio in YSK, KSP, and LYS sediment: 4.86 × 10(-4)-6.20 × 10(-4)). At low Eh(S.H.E.) values (mild to strong reducing environment), arsenic may co-precipitate with sulfides as a consequence of sulfate reduction (As/Fe ratios in WST, HKS, and SYNH sediments: 0.42-0.69).

Metallic components of traffic-induced urban aerosol, their spatial variation, and source apportionment

This study proposes a practical method to estimate elemental composition and distribution in order to attribute source and quantify impacts of aerosol particles at an urban region in Kolkata, India. Twelve-hour total particulates were collected in winter (2005-2006) and analyzed by energy-dispersive X-ray fluorescence technique to determine multi-elemental composition, especially trace metals. The aerosols consist of various elements including K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, and Pb which exhibit significant concentration at various sites (p < 0.05). The concentration of different metallic elements were found in the order of Zn > Pb > Ni > Cu > Cr > Co. Statistical multivariate analysis and correlation matrix analyses were performed for factor identification and consequent source apportionment. Contour profiles demonstrate spatial variation of elemental compositions indicating possible source contribution along with meteorological influences. Spatial differences were clearly most significant for Zn, Ni, Pb, and Cu reflecting the importance of anthropogenic inputs, primarily from automobile sources.

Effects of inorganic nutrient levels on the biodegradation of benzene, toluene, and xylene (BTX) by Pseudomonas spp. in a laboratory porous media sand aquifer model

The effect of inorganic nutrients (sulfate, phosphate, and ammonium chloride) on the aerobic biodegradation of benzene, toluene, and xylene (BTX) by Pseudomonas spp. was studied in the laboratory using a glass sand tank. The increase of nutrient levels resulted in enhanced bacterial growth and BTX degradation. Sulfate and phosphate serve as key electron acceptors in the microbiological processes degrading BTX. The observed bacterial morphological changes during BTX degradation reveal that the filamentous bacteria were the dominant species at low temperatures about 20 degrees C. The spherical and rod-shaped cells became dominant at higher temperatures ranging from 25 degrees C to 28 degrees C. When the BTX mixture was allowed to be biodegraded for longer incubation periods of 21-42 h at high phosphate concentrations, large amounts of rod-shaped cells were clustered. The morphological adaptation appears to be controlled by the temperature and nutrient levels in the sandy medium where Pseudomonas spp. thrives.