A numerical approach to optimize the performance of HTL-free carbon electrode-based perovskite solar cells using organic ETLs

Carbon electrode-based perovskite solar cells (c-PSCs) without a hole transport layer (HTL) have obtained a significant interest owing to their cost-effective, stable, and simplified structure. However, their application is limited by low efficiency and the prevalence of high-temperature processed electron transport layer (ETL), e.g. TiO2, which also has poor optoelectronic properties, including low conductivity and mobility. In this study, a series of organic materials, namely PCBM ((Park et al., 2023; Park et al., 2023) [6,6]-phenyl-C61-butyric acid methyl ester, C72H14O2), Alq3 (Al(C9H6NO)3), BCP (2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline, C26H20N2), C60, ICBA (indene-C60 bisadduct, C78H16) and PEIE (poly (ethylenimine) ethoxylated, (C37H24O6N2)n) have been numerically analyzed in SCAPS-1D solar simulator to explore alternative potential ETL materials for HTL-free c-PSCs. The presented device has FTO/ETL/CH3NH3PbI3/carbon structure, and its performance is optimized based on significant design parameters. The highest achieved PCEs for PCBM, Alq3, BCP, C60, ICBA, and PEIE-based devices are 22.85%, 19.08%, 20.99%, 25.51%, 23.91%, and 22.53%, respectively. These PCEs are obtained for optimum absorber thickness for each case, with an acceptor concentration of 1.0 × 1017 cm-3 and defect density of 2.5 × 1013 cm-3. The C60-based cell has been found to outperform with device parameters as Voc of 1.29 V, Jsc of 23.76 mA/cm2, and FF of 82.67%. As the design lacks stability when only organic materials are employed, each of the presented devices have been analyzed by applying BiI3, LiF, and ZnO as protective layers with the performances not compromised. We believe that our obtained results will be of great interest in developing stable and efficient HTL-free c-PSCs.

Bio-net dataset: AI-based diagnostic solutions using peripheral blood smear images

Peripheral blood smear examination is one of the basic steps in the evaluation of different blood cells. It is a confirmatory step after an automated complete blood count analysis. Manual microscopy is time-consuming and requires professional laboratory expertise. Therefore, the turn-around time for peripheral smear in a health care center is approximately 3-4 hours. To avoid the traditional method of manual counting under the microscope a computerized automation of peripheral blood smear examination has been adopted, which is a challenging task in medical diagnostics. In recent times, deep learning techniques have overcome the challenges associated with human microscopic evaluation of peripheral smears and this has led to reduced cost and precise diagnosis. However, their application can be significantly improved by the availability of annotated datasets. This study presents a large customized annotated blood cell dataset (named the Bio-Net dataset from healthy individuals) and blood cell detection and counting in the peripheral blood smear images. A mini-version of the dataset for specialized WBC-based image processing tasks is also equipped to classify the healthy and mature WBCs in their respective classes. An object detection algorithm called You Only Look Once (YOLO) with a refashion disposition has been trained on the novel dataset to automatically detect and classify blood cells into RBCs, WBCs, and platelets and compare the results with other publicly available datasets to highlight the versatility. In short the introduction of the Bio-Net dataset and AI-powered detection and counting offers a significant potential for advancement in biomedical research for analyzing and understanding biological data.

Spin-Selective Angular Dispersion Control in Dielectric Metasurfaces for Multichannel Meta-Holographic Displays

Angle-dependent next-generation displays have potential applications in 3D stereoscopic and head-mounted displays, image combiners, and encryption for augmented reality (AR) and security. Metasurfaces enable such exceptional functionalities with groundbreaking achievements in efficient displays over the past decades. However, limitations in angular dispersion control make them unfit for numerous nanophotonic applications. Here, we propose a spin-selective angle-dependent all-dielectric metasurface with a unique design strategy to manifest distinct phase information at different incident angles of light. As a proof of concept, the phase masks of two images are encoded into the metasurface and projected at the desired focal plane under different angles of left circularly polarized (LCP) light. Specifically, the proposed multifunctional metasurface generates two distinct holographic images under LCP illumination at angles of +35 and -35°. The presented holographic displays may provide a feasible route toward multifunctional meta-devices for potential AR displays, encrypted imaging, and information storage applications.

A High-Performance, Low-Cost, and Integrated Hairpin Topology RF Switched Filter Bank for Radar Applications

Switched filter banks find widespread application in frequency-hopping radar systems and communication networks with multiple operating frequencies, especially in situations demanding elevated filter element isolation. In this paper, the design and implementation of a highly isolated switchable narrow-bandpass filter bank architecture using hairpin microstrip topology is presented. The filter bank has four discrete bandpass filters with passbands of 2.0-2.2 GHz, 2.3-2.5 GHz, 3.1-3.3 GHz, and 3.9-4.1 GHz. These filters span the radar S-frequency band (2.0-4.0 GHz). In order to switch between channels with a switching speed of nanoseconds, low-loss and highly isolated SP4T switches are implemented. Advanced design system (ADS) software is used to design the various filter functionalities, and the entire system is tested on a vector network analyzer (VNA). The proposed architecture makes it much easier to put the filter bank into practice and switch it to the desired frequency, which is useful for radar receiver applications.

Paper-based facile capacitive touch arrays for wireless mouse cursor control pad

Wireless devices have become extremely inexpensive and popular in recent years. The two most significant advantages of wireless devices over wired ones are convenience and flexibility. Considering this, a wireless mouse pad prototype for access has been developed in this study. A capacitive sensors-based mouse pad with basic operations and conventional features has been developed using sensing arrays on paper. A facile, do-it-yourself fabrication process was utilized to develop a cost-effective, thin, wearable, and cleanroom-free wireless mouse cursor control (MCC) pad. The ablation process was used to cut the traces of conductive tape and paste them onto the paper to develop the MCC pad. The pad was connected with Espressif Systems (ESP)32 to wirelessly control the cursor of mobile and laptop. The capacitive touch sensor array-based pad is easy to reproduce and recycle. This pad can contribute to future advancements in thin human-machine interfaces, soft robotics, and medical and healthcare applications.

Dielectric chiral metasurfaces for enhanced circular dichroism spectroscopy at near infrared regime

Numerous applications of chiro-optical effects can be found in nanophotonics, including imaging and spin-selective absorption, particularly in sensing for separating and detecting chiral enantiomers. Flat single-layer metasurfaces composed of chiral or achiral sub-wavelength structures offer unique properties to manipulate the light due to their extraordinary light-matter interaction. However, at optical wavelengths, the generation of strong chirality is found to be challenging via conventional chiral metasurface approaches. This work intends to design and optimize a dielectric chiral meta-nano-surface based on a diatomic design strategy to comprehend giant chiro-optical effects in the near-infrared (NIR) regime for potential application in circular dichroism (CD) spectroscopy. Instead of using a single chiral structure that limits the CD value at optical wavelengths, the proposed metasurface used a diatomic (two meta-atoms with distinct geometric parameters) chiral structure as a building block to significantly enhance the chiro-optical effect. Combining both meta-atoms in a single periodicity of the building block introduces constructive and destructive interferences to attain the maximum circular dichroism value exceeding 75%. Moreover, using multipolar resonance theory, the physics behind the generation of giant chiro-optical effects have also been investigated. The proposed dielectric chiral meta-platform based on the extra degree of freedom can find application in compact integrated optical setups for CD spectroscopy, enantiomer separation and detection, spin-dependent color filters, and beam splitters.

Dynamic control of hybrid grafted perfect vector vortex beams

Perfect vector vortex beams (PVVBs) have attracted considerable interest due to their peculiar optical features. PVVBs are typically generated through the superposition of perfect vortex beams, which suffer from the limited number of topological charges (TCs). Furthermore, dynamic control of PVVBs is desirable and has not been reported. We propose and experimentally demonstrate hybrid grafted perfect vector vortex beams (GPVVBs) and their dynamic control. Hybrid GPVVBs are generated through the superposition of grafted perfect vortex beams with a multifunctional metasurface. The generated hybrid GPVVBs possess spatially variant rates of polarization change due to the involvement of more TCs. Each hybrid GPVVB includes different GPVVBs in the same beam, adding more design flexibility. Moreover, these beams are dynamically controlled with a rotating half waveplate. The generated dynamic GPVVBs may find applications in the fields where dynamic control is in high demand, including optical encryption, dense data communication, and multiple particle manipulation.

Fast Response Facile Fabricated IDE-Based Ultra-sensitive Humidity Sensor for Medical Applications

An eco-friendly, biodegradable, flexible, and facile fabricated interdigital electrode-based capacitive humidity sensor with applications in health and medicine has been reported here. Several sensors use copper tape as electrodes on the polyethylene terephthalate (PET) substrate, with non-woven paper as the sensing layer. Two different configurations of sensors were tested, i.e., with and without pores in the PET substrate. The sensing performance of both sensors has been tested for relative humidity ranging from 35 to 100% at temperatures ranging from 20 to 50 °C. The capacitance of the sensor varies linearly in response to the change in humidity. The sensor with pores shows a response from 28 to 630 pF as the humidity varied from 35 to 100%, whereas the sensor without pores responded from 22 to 430 pF. The response and recovery times of the fabricated sensor are observed as ∼2.4, and ∼1.8 s, respectively, and the sensitivity is 9.67 pF/% RH. The sensors are tested multiple times, and repeatable results are achieved each time with an accuracy of ±0.22%. Further, the sensor's response is also stable for different ranges of temperatures. Finally, to demonstrate an application of the proposed sensor, it has been utilized to monitor respiration through nose and mouth breathing. The low-cost, stable, repeatable, and highly sensitive response makes our fabricated sensor a promising candidate for practical field applications.

Spin-isolated ultraviolet-visible dynamic meta-holographic displays with liquid crystal modulators

Wearable displays or head-mounted displays (HMDs) have the ability to create a virtual image in the field of view of one or both eyes. Such displays constitute the main platform for numerous virtual reality (VR)- and augmented reality (AR)-based applications. Meta-holographic displays integrated with AR technology have potential applications in the advertising, media, and healthcare sectors. In the previous decade, dielectric metasurfaces emerged as a suitable choice for designing compact devices for highly efficient displays. However, the small conversion efficiency, narrow bandwidth, and costly fabrication procedures limit the device's functionalities. Here, we proposed a spin-isolated dielectric multi-functional metasurface operating at broadband optical wavelengths with high transmission efficiency in the ultraviolet (UV) and visible (Vis) regimes. The proposed metasurface comprised silicon nitride (Si₃N₄)-based meta-atoms with high bandgap, i.e., ∼ 5.9 eV, and encoded two holographic phase profiles. Previously, the multiple pieces of holographic information incorporated in the metasurfaces using interleaved and layer stacking techniques resulted in noisy and low-efficiency outputs. A single planar metasurface integrated with a liquid crystal was demonstrated numerically and experimentally in the current work to validate the spin-isolated dynamic UV-Vis holographic information at broadband wavelengths. In our opinion, the proposed metasurface can have promising applications in healthcare, optical security encryption, anti-counterfeiting, and UV-Vis nanophotonics.

A highly efficient broadband multi-functional metaplate

Due to the considerable potential of ultra-compact and highly integrated meta-optics, multi-functional metasurfaces have attracted great attention. The mergence of nanoimprinting and holography is one of the fascinating study areas for image display and information masking in meta-devices. However, existing methods rely on layering and enclosing, where many resonators combine various functions effectively at the expense of efficiency, design complication, and complex fabrication. To overcome these limitations, a novel technique for a tri-operational metasurface has been suggested by merging PB phase-based helicity-multiplexing and Malus's law of intensity modulation. To the best of our knowledge, this technique resolves the extreme-mapping issue in a single-sized scheme without increasing the complexity of the nanostructures. For proof of concept, a multi-functional metasurface built of single-sized zinc sulfide (ZnS) nanobricks is developed to demonstrate the viability of simultaneous control of near and far-field operations. The proposed metasurface successfully verifies the implementation of a multi-functional design strategy with conventional single-resonator geometry by reproducing two high-fidelity images in the far field and projecting one nanoimprinting image in the near field. This makes the proposed information multiplexing technique a potential candidate for many high-end and multi-fold optical storage, information-switching, and anti-counterfeiting applications.

Ultraviolet-Visible Multifunctional Vortex Metaplates by Breaking Conventional Rotational Symmetry

Metasurfaces have shown remarkable potential to manipulate many of light's intrinsic properties, such as phase, amplitude, and polarization. Recent advancements in nanofabrication technologies and persistent efforts from the research community result in the realization of highly efficient, broadband, and multifunctional metasurfaces. Simultaneous control of these characteristics in a single-layered metasurface will be an apparent technological extension. Here, we demonstrate a broadband multifunctional metasurface platform with the unprecedented ability to independently control the phase profile for two orthogonal polarization states of incident light over dual-wavelength spectra (ultraviolet to visible). In this work, multiple single-layered metasurfaces composed of bandgap-engineered silicon nitride nanoantennas are designed, fabricated, and optically characterized to demonstrate broadband multifunctional light manipulation ability, including structured beam generation and meta-interferometer implementation. We envision the presented metasurface platform opening new avenues for broadband multifunctional applications including ultraviolet-visible spectroscopy, spatially modulated illumination microscopy, optical data storage, and information encoding.

Emerging Two-Dimensional Materials-Based Electrochemical Sensors for Human Health and Environment Applications

Two-dimensional materials (2DMs) have been vastly studied for various electrochemical sensors. Among these, the sensors that are directly related to human life and health are extremely important. Owing to their exclusive properties, 2DMs are vastly studied for electrochemical sensing. Here we have provided a selective overview of 2DMs-based electrochemical sensors that directly affect human life and health. We have explored graphene and its derivatives, transition metal dichalcogenide and MXenes-based electrochemical sensors for applications such as glucose detection in human blood, detection of nitrates and nitrites, and sensing of pesticides. We believe that the areas discussed here are extremely important and we have summarized the prominent reports on these significant areas together. We believe that our work will be able to provide guidelines for the evolution of electrochemical sensors in the future.

Design and optimization of four-terminal mechanically stacked and optically coupled silicon/perovskite tandem solar cells with over 28% efficiency

Silicon/perovskite tandem devices are believed to be a favorite contender for improving cell performance over the theoretical maximum value of single-junction photovoltaic (PV) cells. The present study evaluates the design and optimization of four-terminal (4-T) mechanically stacked and optically coupled configurations using SCAPS (solar cell capacitance simulator). Low-cost, stable, and easily processed semitransparent carbon electrode-based perovskite solar cells (c-PSCs) without hole transport material (HTM) and highly efficient crystalline silicon (c-Si) PV cells were utilized as top and bottom cells, respectively. The wide bandgap multi-cation perovskite C s x ( F A 0.4 M A 0.6 ) 1 - x P b I 2.8 B r 0.2 and a low bandgap c-Si were employed as light-harvesting layers in the top and bottom cells, respectively. The impact of perovskite thickness and doping concentrations were examined and optimized for both tandem configurations. Under optimized conditions, thicknesses of 1000 nm and 1100 nm are the best values of the perovskite absorber layer for 4-T mechanically stacked and optically coupled arrangements, respectively. Likewise, 1 × 10¹⁷ cm^-3 doping concentration of top cells revealed the highest performance in both structures. With these optimized parameters under tandem configurations, efficiency values of 28.38% and 29.34% were obtained in 4-T mechanically and optically coupled tandems, respectively. Results suggest that by optimizing perovskite thickness and doping concentration, the proposed designs using HTM-free c-PSCs could enhance device performance.

Single-Cell-Driven Tri-Channel Encryption Meta-Displays

Multi-functional metasurfaces have attracted great attention due to the significant possibilities to realize highly integrated and ultra-compact meta-devices. Merging nano-printing and holographic information multiplexing is one of the effective ways to achieve multi-functionality, and such a merger can increase the information encoding capacity. However, the current approaches rely on stacking layers and interleaving, where multiple resonators effectively combine different functionalities on the cost of efficiency, design complexity, and challenging fabrication. To address such challenges, a single meta-nanoresonator-based tri-functional metasurface is proposed by combining the geometric phase-based spin-decoupling and Malus's law intensity modulation. The proposed strategy effectively improves information capacity owing to the orientation degeneracy of spin-decoupling rather than layer stacking or super-cell designs. To validate the proposed strategy, a metasurface demonstrating two helicity-dependent holographic outputs is presented in far-field, whereas a continuous nano-printing image is in near-field. It is also employed on CMOS-compatible and cost-effective hydrogen amorphous silicon providing transparent responses for the whole visible band. As a result, the proposed metasurface has high transmission efficiency in the visible regime and verifies the design strategy without adding extra complexities to conventional nano-pillar geometry. Therefore, the proposed metasurface opens new avenues in multi-functional meta-devices design and has promising applications in anti-counterfeiting, optical storage and displays.​.

A unique physics-inspired deep-learning-based platform introducing a generalized tool for rapid optical-response prediction and parametric-optimization for all-dielectric metasurfaces

Metasurfaces are composed of a two-dimensional array of carefully engineered subwavelength structures. They provide a novel compact alternative to conventional voluminous optical components. However, their design involves a time-consuming hit and trial procedure, requiring many iterative electromagnetic simulations through expensive commercial solvers. To overcome this non-practical design strategy, recently, various deep-learning-based fast and low computational cost networks have been proposed to design and optimize individual meta-atoms and complete metasurfaces. Most of them focus on optimizing the amplitude response of nanostructures, whereas mapping the phase response is a much more challenging problem that needs to be addressed. Since the metaatom's optical response is entirely reliant on and vulnerable to its geometrical structure, underlying material, and operating wavelength, changing any of these parameters changes the entire physics of the problem in hand. Here, we propose novel deep-learning-based generalized forward and inverse design approaches to optimize all-dielectric transmissive metasurfaces. The proposed forward predicting neural networks take all the geometrical parameters and the physical properties of the bar-shaped dielectric nano-resonators as the input and predict the cross-polarized transmission amplitude and modulated phase at eight distinct rotation angles of the nano-bar. These networks are generalized to predict the electromagnetic (EM) response of different dielectric materials at different operating wavelengths. An inverse design neural network is also proposed that takes the target transmission amplitude and phase at eight discrete orientation angles of the nano-bar as the primary input. The underlying physics of the problem is also incorporated by feeding the intrinsic material properties and the operating wavelength of the nano-bar as a second input to the inverse neural network. It predicts the optimum set of geometrical parameters to achieve maximum cross-polarized transmission and complete Pancharatnam-Berry (PB) phase coverage from 0 to 2π. The average test data mean square error (MSE) achieved for the forward predicting neural network is 1.8 × 10^-3 and that of the inverse design neural network is 2.8 × 10^-1. The average MSEs for different material's test samples are demonstrated to validate the generalizability of the proposed models in terms of seen and unseen materials. A comparative analysis of the proposed approach with conventional EM software optimization tools is performed to prove that the proposed inverse design works much faster than the conventional methods, also it can handle a comparatively larger range of parameters and predicts the results in a single run with high accuracy.

Facile Pressure-Sensitive Capacitive Touch Keypad for a Green Intelligent Human-Machine Interface

There is a great demand for human-machine interfaces (HMIs) in emerging electronics applications. However, commercially available plastic-based HMIs are primarily rigid, application-specific, and hard to recycle and dispose of due to their non-biodegradability. This results in electronic and plastic waste, potentially damaging the environment by ending up in landfills and water resources. This work presents a green, capacitive pressure-sensitive (CPS), touch sensor-based keypad as a disposable, wireless, and intelligent HMI to mitigate these problems. The CPS touch keypads were fabricated through a facile green fabrication process by direct writing of graphite-on-paper, using readily available materials such as paper and pencils, etc. The interdigitated capacitive (IDC) touch sensors were optimized by analyzing the number of electrode fingers, dimensions, and spacing between the electrode fingers. The CPS touch keypad was customized to wirelessly control a robotic arm's movements based on the touch input. A low-pressure touch allows slow-speed robotic arm movement for precision movements, and a high-pressure touch allows high-speed robotic arm movement to cover the large movements quickly. The green CPS touch keypad, as a disposable wireless HMI, has the potential to enforce a circular economy by mitigating electronic and plastic waste, which supports the vision of a sustainable and green world.

Garage-Fabricated, Ultrasensitive Capacitive Humidity Sensor Based on Tissue Paper

The role of humidity sensors in different industries and field applications, such as agriculture, food monitoring, biomedical equipment, heating, and ventilation, is well known. However, most commercially available humidity sensors are based on polymers or electronic materials that are not degradable and thus contribute to electronic waste. Here, we report a low-cost, flexible, easy-to-fabricate, and eco-friendly parallel-plate capacitive humidity sensor for field applications. The sensor is fabricated from copper tape and tissue paper, where copper tape is used to create the plates of the capacitor, and tissue paper is used as a dielectric sensing layer. Along with the low cost, the high sensitivity, better response and recovery times, stability, and repeatability make this sensor unique. The sensor was tested for relative humidity (RH), ranging from 40% to 99%, and the capacitance varied linearly with RH from 240 pF to 720 pF, as measured by an Arduino. The response time of the sensor is ~1.5 s, and the recovery time is ~2.2 s. The experiment was performed 4-5 times on the same sensor, and repeatable results were achieved with an accuracy of ±0.1%. Furthermore, the sensor exhibits a stable response when tested at different temperatures. Due to the above advantages, the presented sensor can find ready applications in different areas.

Nickel-Based High-Bandwidth Nanostructured Metamaterial Absorber for Visible and Infrared Spectrum

The efficient control of optical light at the nanoscale level attracts marvelous applications, including thermal imaging, energy harvesting, thermal photovoltaics, etc. These applications demand a high-bandwidth, thermally robust, angularly stable, and miniaturized absorber, which is a key challenge to be addressed. So, in this study, the simple and cost-effective solution to attain a high-bandwidth nanostructured absorber is demonstrated. The designed nanoscale absorber is composed of a simple and plain circular ring of nickel metal, which possesses many interesting features, including a miniaturized geometry, easily fabricable design, large operational bandwidth, and polarization insensitivity, over the previously presented absorbers. The proposed nanoscale absorber manifests an average absorption of 93% over a broad optical window from 400 to 2800 nm. Moreover, the detailed analysis of the absorption characteristics is also performed by exciting the optical light's various incident and polarization angles. From the examined outcome, it is concluded that the nanostructured absorber maintains its average absorption of 80% at oblique incident angles in a broad wavelength range from 400 to 2800 nm. Owing to its appealing functionalities, such as the large bandwidth, simple geometry, low cost, polarization insensitivity, and thermal robustness of the constituting metal, nickel (Ni), this nano-absorber is made as an alternative for the applications of energy harvesting, thermal photovoltaics, and emission.

Highly Efficient Perfect Vortex Beams Generation Based on All-Dielectric Metasurface for Ultraviolet Light

Featuring shorter wavelengths and high photon energy, ultraviolet (UV) light enables many exciting applications including photolithography, sensing, high-resolution imaging, and optical communication. The conventional methods of UV light manipulation through bulky optical components limit their integration in fast-growing on-chip systems. The advent of metasurfaces promised unprecedented control of electromagnetic waves from microwaves to visible spectrums. However, the availability of suitable and lossless dielectric material for the UV domain hindered the realization of highly efficient UV metasurfaces. Here, a bandgap-engineered silicon nitride (Si3N4) material is used as a best-suited candidate for all-dielectric highly efficient UV metasurfaces. To demonstrate the wavefront manipulation capability of the Si3N4 for the UV spectrum, we design and numerically simulate multiple all-dielectric metasurfaces for the perfect vortex beam generation by combing multiple phase profiles into a single device. For different numerical apertures (NA =0.3 and 0.7), it is concluded that the diffracted light from the metasurfaces with different topological charges results in an annular intensity profile with the same ring radius. It is believed that the presented Si3N4 materials and proposed design methodology for PV beam-generating metasurfaces will be applicable in various integrated optical and nanophotonic applications such as information processing, high-resolution spectroscopy, and on-chip optical communication.

Broad-Band Polarization-Insensitive Metasurface Holography with a Single-Phase Map

The remarkable potential of metasurface holography promises revolutionary advancements for imaging, chip-integrated augmented/virtual reality (AR/VR) technology, and flat optical displays. The choice of constituent element geometry constrains many potential applications purveyed through polarization-independent optical response. The limited capabilities and degree of freedoms in commonly used meta-atoms restrict the design flexibility to break the conventional trade-off between polarization-insensitivity and bandwidth. Here, we propose a geometric phase-enabled novel design strategy to break this conventional trade-off. The proposed strategy ensures the realization of broad-band polarization-insensitivity through a simplified design procedure. An identical output wavefront manipulation is achieved by adjusting the phase delay freedom of geometric phase engineering under different incident polarization conditions. For proof of concept, a metahologram device is fabricated by an optimized complementary metal-oxide-semiconductor (CMOS)-compatible material of hydrogenated amorphous silicon (a-Si:H). This metahologram device reproduces the required hologram with high image fidelity and efficiency under different polarization scenarios of white light incidence. Due to the simple design strategy, low computational cost, and easy fabrication, the proposed technique can be an excellent candidate for realizing polarization-insensitive metahologram devices.

Single-Step Fabricable Flexible Metadisplays for Sensitive Chemical/Biomedical Packaging Security and Beyond

Secure packaging and transportation of light-sensitive chemical and biomedical test tubes are crucial for environmental protection and public health. Benefiting from the compact form factor and high efficiency of optical metasurfaces, we propose a broad-band polarization-insensitive flexible metasurface for the security of sensitive packages in the transport industry. We employ both the propagation and the geometric phase of novel TiO₂ resin-based anisotropic nanoresonators to demonstrate a flexible and broad-band polarization-insensitive metasurface in the visible domain. The ultraviolet nanoimprint lithographic technique (UV-NIL) is used to fabricate high-index TiO₂ nanoparticle-embedded-resin (nano-PER) structures that are patterned on a flexible substrate. This novel approach provides swift single-step fabrication without secondary fabrication steps such as deposition and etching. Moreover, replicating and transforming patterns over flexible substrates make the proposed technique highly suitable for large-throughput commercial manufacturing. As the proposed metahologram manifests high transmission efficiency in the visible domain, such flexible metaholographic platforms could find several exciting applications in bendable/curved displays, wearable devices, and holographic labeling for interactive displays.

Nanostructured chromium-based broadband absorbers and emitters to realize thermally stable solar thermophotovoltaic systems

The efficiency of traditional solar cells is constrained due to the Shockley-Queisser limit, to circumvent this theoretical limit, the concept of solar thermophotovoltaics (STPVs) has been introduced. The typical design of an STPV system consists of a wideband absorber with its front side facing the sun. The back of this absorber is physically attached to the back of a selective emitter facing a low-bandgap photovoltaic (PV) cell. We demonstrate an STPV system consisting of a wideband absorber and emitter pair achieving a high absorptance of solar radiation within the range of 400-1500 nm (covering the visible and infrared regions), whereas the emitter achieves an emittance of >95% at a wavelength of 2.3 μm. This wavelength corresponds to the bandgap energy of InGaAsSb (0.54 eV), which is the targeted PV cell technology for our STPV system design. The material used for both the absorber and the emitter is chromium due to its high melting temperature of 2200 K. An absorber and emitter pair is also fabricated and the measured results are in agreement with the simulated results. The design achieves an overall solar-to-electrical simulated efficiency of 21% at a moderate temperature of 1573 K with a solar concentration of 3000 suns. Furthermore, an efficiency of 15% can be achieved at a low temperature of 873 K with a solar concentration of 500 suns. The designs are also insensitive to polarization and show negligible degradation in solar absorptance and thermal emittance with a change in the angle of incidence.

Atmospheric propagation of space-fractional Gaussian-beam waves in a FSO communication system

We present a novel, self-consistent analytical model of Gaussian-beam propagation through the atmospheric turbulence by solving the paraxial wave equation in a fractional-dimension space of dimension D, in the range 2 < D ≤ 3, corresponding to the effective spatial dimension experienced by the beam under given turbulent conditions in a free space optical (FSO) communication system. The well-known refractive index structure parameter (C n2) has been mapped from D = 2.668 (C n2≈10^-13, strong fluctuations) to D = 2.999 (C n2≈10^-16, weak fluctuations) in our simple analytical model, whereas D = 3 corresponds to the ideal case of free-space propagation under zero turbulence. Finally, an optimization problem is developed to mitigate the effects of atmospheric turbulence, leading to efficient transceiver design for the FSO communication system to ensure the reliability of links under varying atmospheric turbulence.

Exploiting zirconium nitride for an efficient heat-resistant absorber and emitter pair for solar thermophotovoltaic systems

A perfect absorber in the visible-infrared regime maintaining its performance at elevated temperatures and under a harsh environment is needed for energy harvesting using solar-thermophotovoltaic (STPV) systems. A near-perfect metasurface absorber based on lossy refractory metal nitride, zirconium-nitride (ZrN), having a melting-point of 2,980°C, is presented. The numerically proposed design with metal-insulator-metal configuration exhibits an average of > 95% for 400-800 nm and 86% for 280-2200 nm. High absorption is attributed to magnetic resonance leading to free-space impedance matching. The subwavelength structure is polarization- and angle-insensitive and is highly tolerant to fabrication imperfections. An emitter is optimized for bandgap energy ranging from 0.7 eV-1.9 eV.

Chiroptical Metasurfaces: Principles, Classification, and Applications

Chiral materials, which show different optical behaviors when illuminated by left or right circularly polarized light due to broken mirror symmetry, have greatly impacted the field of optical sensing over the past decade. To improve the sensitivity of chiral sensing platforms, enhancing the chiroptical response is necessary. Metasurfaces, which are two-dimensional metamaterials consisting of periodic subwavelength artificial structures, have recently attracted significant attention because of their ability to enhance the chiroptical response by manipulating amplitude, phase, and polarization of electromagnetic fields. Here, we reviewed the fundamentals of chiroptical metasurfaces as well as categorized types of chiroptical metasurfaces by their intrinsic or extrinsic chirality. Finally, we introduced applications of chiral metasurfaces such as multiplexing metaholograms, metalenses, and sensors.

Engineering tunability through electro-optic effects to manifest a multifunctional metadevice

Ultrafast modulation of the refractive index exhibits either linear or nonlinear electro-optic (EO) effect, which is extensively utilized in tunable photonic circuits. Silicon, a mature material for on-chip devices, lacks a strong electro-optic (EO) Pockels effect. Utilization of the Pockels effect alters the intrinsic property (refractive index) of the material that manifests tunability and offers expanded functionalities. Driven by the limited space constraints in data storage, sensing, and imaging applications, we propose an electrically tunable meta-device whose resonance wavelength and focal length can be tuned by varying applied electric fields in the visible range. The fundamental unit of a metalens is the barium titanate (BTO) diffractive optical element placed on indium titanium oxide (which serves as an electrode) with SiO2 as the substrate. The metalens' tunability is characterized by point spread function (PSF), full-width half-maximum (FWHM), and imaging bandwidth that demonstrates the tuning of resonance wavelength and focal length. Moreover, polarization-insensitive meta-holograms are realized at a wavelength of 633 nm without utilizing propagation and Pancharatnam-Berry (PB) phase. The proposed study can find exciting applications in machine vision, broadband microscopy, and spectroscopy.

Holographic metasurface gas sensors for instantaneous visual alarms

The rapid detection of biological and chemical substances in real time is particularly important for public health and environmental monitoring and in the military sector. If the process of substance detection to visual reporting can be implemented into a single miniaturized sensor, there could be a profound impact on practical applications. Here, we propose a compact sensor platform that integrates liquid crystals (LCs) and holographic metasurfaces to autonomously sense the existence of a volatile gas and provide an immediate visual holographic alarm. By combining the advantage of the rapid responses to gases realized by LCs with the compactness of holographic metasurfaces, we develop ultracompact gas sensors without additional complex instruments or machinery to report the visual information of gas detection. To prove the applicability of the compact sensors, we demonstrate a metasurface-integrated gas sensor on safety goggles via a one-step nanocasting process that is attachable to flat, curved, and flexible surfaces.

Optical spin-symmetry breaking for high-efficiency directional helicity-multiplexed metaholograms

Helicity-multiplexed metasurfaces based on symmetric spin-orbit interactions (SOIs) have practical limits because they cannot provide central-symmetric holographic imaging. Asymmetric SOIs can effectively address such limitations, with several exciting applications in various fields ranging from asymmetric data inscription in communications to dual side displays in smart mobile devices. Low-loss dielectric materials provide an excellent platform for realizing such exotic phenomena efficiently. In this paper, we demonstrate an asymmetric SOI-dependent transmission-type metasurface in the visible domain using hydrogenated amorphous silicon (a-Si:H) nanoresonators. The proposed design approach is equipped with an additional degree of freedom in designing bi-directional helicity-multiplexed metasurfaces by breaking the conventional limit imposed by the symmetric SOI in half employment of metasurfaces for one circular handedness. Two on-axis, distinct wavefronts are produced with high transmission efficiencies, demonstrating the concept of asymmetric wavefront generation in two antiparallel directions. Additionally, the CMOS compatibility of a-Si:H makes it a cost-effective alternative to gallium nitride (GaN) and titanium dioxide (TiO2) for visible light. The cost-effective fabrication and simplicity of the proposed design technique provide an excellent candidate for high-efficiency, multifunctional, and chip-integrated demonstration of various phenomena.

Single-layered meta-reflectarray for polarization retention and spin-encrypted phase-encoding

Broadband communication with high data rates is a dire need for state-of-the-art wireless technologies. For achieving efficient wireless communication (particularly in an indoor environment), the electromagnetic (EM) waves should maintain their state of polarization despite encountering multiple reflections. Metasurfaces provide a unique platform to design subwavelength-featured meta-reflectarrays which enable the desired retention of the polarization state of an EM wave upon reflection. We present a single-layered broadband meta-reflectarray, simultaneously breaking n-fold (n > 2) rotational and mirror symmetry, which exhibits an unprecedented control over the phase, amplitude, and polarization of a reflected EM wave. This unique control enables the retention of polarization state and recording of spin-encrypted information for the reflected EM waves. Such novel multifunctional meta-reflectarray can be crucial to building an indoor setup for high data rate wireless communications. Meanwhile, the meta-array's ability to encode phase information provides an extra degree of freedom to structure and control (via incident spin) the reflected EM beam in the desired way. For the proof of concept, we have experimentally demonstrated a spin-encrypted holographic display which reconstructs the recorded holographic image at an image plane for the left circularly polarized (LCP) illumination and exhibits circular dichroism for the right circularly polarized (RCP) incident waves. The proposed meta-array can find applications in 5G indoor wireless communication, chiral sensing, spin-selective imaging, holography, and encryption.

Stimuli-Responsive Dynamic Metaholographic Displays with Designer Liquid Crystal Modulators

Flat optics, realized by the artificially created 2D material platform called optical metasurfaces, is currently undergoing a science-to-technology transition. However, "real-time" active operations of such flat optical devices remain yet unresolved. Here, liquid crystals (LCs)-integrated metaholograms for ultracompact dynamic holographic displays are proposed. The anisotropic nature of the LCs allows facile and repeatable manipulation of the polarization of light. Specifically designed ("designer") LCs and efficient helicity-encoded metaholograms are combined to realize stimuli-responsive dynamic displays. The designer LC modulators are used as switches that enable a variety of external stimuli (e.g., electric field, heat, surface pressure) to operate holographic images in real-time. Such a dynamic metaholographic platform will provide a path to external stimuli-driven "smart" sensing and display applications such as hologram labels for temperature/pressure/touch monitoring and interactive holographic displays with haptic motion recognition.

Diamond step-index nanowaveguide to structure light efficiently in near and deep ultraviolet regimes

Two-dimensional metamaterials, consisting of an array of ultrathin building blocks, offer a versatile and compact platform for tailoring the properties of the electromagnetic waves. Such flat metasurfaces provide a unique solution to circumvent the limitations imposed by their three-dimensional counterparts. Albeit several successful demonstrations of metasurfaces have been presented in the visible, infrared, and terahertz regimes, etc., there is hardly any demonstration for ultraviolet wavelengths due to the unavailability of the appropriate lossless materials. Here, we present diamond as an ultra-low loss material for the near and deep ultraviolet (UV) light and engineer diamond step-index nanowaveguides (DSINs) to achieve full control over the phase and amplitude of the incident wave. A comprehensive analytical solution of step-index nanowaveguides (supported by the numerical study) is provided to describe the underlying mechanism of such controlled wavefront shaping. Due to the ultra-low loss nature of diamond in near and deep UV regimes, our DSINs and metasurfaces designed (from them) exhibit a decent efficiency of ≈ 84% over the entire spectrum of interest. To verify this high efficiency and absolute control over wavefront, we have designed polarization-insensitive meta-holograms through optimized DSINs for operational wavelength λ = 250 nm.

Planar Achiral Metasurfaces-Induced Anomalous Chiroptical Effect of Optical Spin Isolation

Planar chiral structures respond differently for oppositely handed incident light, and thus can produce extraordinary chiroptical effects such as circular conversion dichroism (CCD) and asymmetric transmission (AT). Such chiroptical effects are powerful tools to realize the fundamental principle of optical spin isolation, which leads to a plethora of applications such as optical conversion diodes, chiral imaging, and sensing. Here, we demonstrate the chiroptical effects of simultaneous CCD and AT through meticulously designed single-layered achiral nanofins. Our metamolecule consists of four achiral hydrogenated amorphous silicon (a-Si:H) nanofins that are carefully oriented and optimized to exhibit considerable CCD and AT. The device demonstrates a circular conversion dichroism of 55% and an asymmetric transmission of 58% at a wavelength of 633 nm. Right-hand circularly polarized light (RHCP) is completely absorbed, while left-hand circularly polarized light (LHCP) is transmitted with a polarization conversion, making it a perfect circular polarization wave isolator with negligible backscattering (due to low reflectance). This unique design and its underlying working mechanism are described comprehensively with three different techniques. These methods validate the proposed design and its methodology. For practical applications such as imaging, the proposed design realizes the Pancharatnam-Berry (PB) phase, achieving a 0-2π phase coverage for transmitted circular polarization. For the proof of concept, a metahologram is designed and demonstrated by employing the achieved full-phase control. The measured response of the fabricated metadevice not only validates the CCD and AT but also exhibits a simulated polarization conversion efficiency of up to 71% and measured efficiency up to 52%, comparable to state-of-the-art metahologram demonstrations.

Engineering multimodal dielectric resonance of TiO2 based nanostructures for high-performance refractive index sensing applications

Optical metasurface based refractive index (RI) sensors find applications in chemical, environmental, biomedical, and food processing industries. The existing RI sensors based on metals suffer from the plasmonic loss in the optical regime; in contrast, those based on Fano-type resonances generated by dielectric materials are either polarization-sensitive or are based on complex geometrical structures prone to fabrication imperfections that can lead to severe performance degradation. Here, we demonstrate that careful engineering of resonance modes in dielectric metasurfaces based on simple symmetric meta-atoms can overcome these limitations. More specifically, we have designed low-loss high-performance RI sensors using all-dielectric metasurfaces composed of TiO₂ based nanostructures of three different shapes (i.e., cylindrical, square and elliptical) operating at near-infrared (NIR) wavelengths, which are robust against the perturbations of geometric parameters. In terms of physics, this work reports sensor structures achieving sharp resonant dips of high Q-factor in the transmission spectra corresponding to multiple dielectric resonance modes (i.e., electric quadrupole, magnetic dipole, and electric dipole) with superior performance as compared to the state-of-the-art. Four absolute liquids (water, ethanol, pentanol, and carbon tetrachloride) with a refractive index ranging from 1.333 to 1.453 are used to numerically validate the performance, and a maximum sensitivity of 798 nm/RIU with FOM up to 732 has been achieved.

Twisted non-diffracting beams through all dielectric meta-axicons

We demonstrate transmission-based all-dielectric, highly efficient (≈73.4%) and polarization-insensitive meta-axicons (for the visible wavelength of 633 nm) to generate zero and higher order Bessel beams without using additional components. The Bessel beams, owing to their diverse applications and non-diffractive properties, attract great interest from the scientific community. It is shown that the propagation length can be increased through a lower numerical aperture (∼2600 λ for NA = 0.1) whereas a higher full width at half maximum (< 0.5 λ) can be obtained for a higher numerical aperture (for NA ≥ 0.7). Our dielectric material, hydrogenated amorphous silicon (a-Si:H), provides a significant efficiency advantage over plasmonic and other high-index all-dielectric (e.g., TiO₂ and GaN) metasurfaces in terms of cost, ease of fabrication, and CMOS compatibility. The finite difference time domain (FDTD) technique based numerically simulated and experimental results show excellent agreement. Due to the technological and scientific importance of the Bessel beams, the recommended material and meta-axicons provide an efficient and compact platform for realizing various advanced applications like optical manipulation, optical alignment, laser fabrication, imaging, and laser machining.

Correction: Polarisation insensitive multifunctional metasurfaces based on all-dielectric nanowaveguides

Correction for 'Polarisation insensitive multifunctional metasurfaces based on all-dielectric nanowaveguides' by Nasir Mahmood et al., Nanoscale, 2018, 10, 18323-18330.

Highly efficient generation of Bessel beams with polarization insensitive metasurfaces

We present a generic approach for the generation of pseudo non-diffracting Bessel beams using polarization insensitive metasurfaces with high efficiency. Cascaded unit cells, which are fully symmetric, are designed for the complete 2π phase control in the transmission mode. Based on the topological arrangements of such unit cells, two metasurfaces for the generation of zero-order (i.e., single phase profile) and first-order (i.e., merger of two distinct phase profiles) Bessel beams are designed and characterized. Both numerical simulations and experimental measurements are in agreement with each other, confirming the electromagnetic characteristics of the reported Bessel beams. Owing to the isotropy of the unit cells and the rotational symmetry of the arrangements, the proposed metasurfaces are polarization insensitive, providing a promising avenue for achieving such wave manipulations with any linear or circular polarization.

Polarisation insensitive multifunctional metasurfaces based on all-dielectric nanowaveguides

Metasurfaces, two dimensional (2D) metamaterials comprised of subwavelength features, can be used to tailor the amplitude, phase and polarisation of an incident electromagnetic wave propagating at an interface. Though many novel metasurfaces have been explored, the hunt for cost-effective, highly efficient, low-loss and polarisation insensitive applications is ongoing. In this work, we utilise an efficient and cost-effective dielectric material, hydrogenated amorphous silicon (a-Si:H), to create a ultra-thin transmissive surface that simultaneously controls phase. This material exhibits significantly lower absorption in the visible regime compared to standard amorphous silicon, making it an ideal candidate for various on-chip applications. Our proposed design, which works on the principle of index waveguiding, integrates two distinct phase profiles, that of a lens and of a helical beam, and is versatile due to its polarisation-insensitivity. We show how this metasurface can lead to highly concentrated optical vortices in the visible domain, whose focused ring-shaped profiles carry orbital angular momentum at the miniaturised scale.

Plasmonic Spherical Heterodimers: Reversal of Optical Binding Force Based on the Forced Breaking of Symmetry

The stimulating connection between the reversal of near-field plasmonic binding force and the role of symmetry-breaking has not been investigated comprehensively in the literature. In this work, the symmetry of spherical plasmonic heterodimer-setup is broken forcefully by shining the light from a specific side of the set-up instead of impinging it from the top. We demonstrate that for the forced symmetry-broken spherical heterodimer-configurations: reversal of lateral and longitudinal near-field binding force follow completely distinct mechanisms. Interestingly, the reversal of longitudinal binding force can be easily controlled either by changing the direction of light propagation or by varying their relative orientation. This simple process of controlling binding force may open a novel generic way of optical manipulation even with the heterodimers of other shapes. Though it is commonly believed that the reversal of near-field plasmonic binding force should naturally occur for the presence of bonding and anti-bonding modes or at least for the Fano resonance (and plasmonic forces mostly arise from the surface force), our study based on Lorentz-force dynamics suggests notably opposite proposals for the aforementioned cases. Observations in this article can be very useful for improved sensors, particle clustering and aggregation.

Tungsten-based Ultrathin Absorber for Visible Regime

Utilizing solar energy requires perfect absorption of light by the photovoltaic cells, particularly solar thermophotovoltaics (STPVs), which can be eventually converted into useful electrical energy. Ultrathin nanostructures, named metasurfaces, provide an intriguing platform to develop the miniaturized solar energy absorbers that can find potential applications in integrated photonics, optical sensing, color imaging, thermal imaging and electromagnetic shielding. Therefore, the quest of novel materials and designs to develop highly efficient absorbers at minuscule scale is an open topic. In this paper, novel absorbers using tungsten-metasurface are developed which give ultrahigh absorbance over a wide frequency spectrum. The proposed designs are two-dimensional, polarization insensitive, broadband and are predicted to give better response under high temperatures ascribed to high melting point of tungsten i.e. 3422 °C. Amongst these designs, cross alignment is found optimum for tungsten, because it is impedance matched with the free space for visible spectrum. This cross arrangement is further tweaked by changing width, height and length resulting in 7 different optimized solutions giving an average absorbance greater than 98%. One, amongst these solutions, gave a maximum average absorbance of 99.3%.

Dual field-of-view step-zoom metalens

A conventional optical zoom system is bulky, expensive, and complicated for real-time adjustment. Recent progress in metasurface research has provided a new solution to achieve innovative compact optical systems. In this Letter, we propose a highly integrated step-zoom lens with dual field of view (FOV) based on double-sided metasurfaces. With silicon nanobrick arrays of spatially varying orientations sitting on both sides of a transparent substrate, this ultrathin step-zoom metalens can be designed to focus an incident circular polarized beam with handedness-dependent FOVs without varying the focal plane, which is important for practical applications. The proposed dual FOV step-zoom metalens, with advantages such as ultracompactness, flexibility, and replicability, can find applications in fields that require ultracompact zoom imaging and beam focusing.

Shaping 3D Path of Electromagnetic Waves Using Gradient-Refractive-Index Metamaterials

An all-dielectric semispherical lens with functions in shaping 3D wave-propagation paths is proposed and experimentally verified. When radiation sources are placed in the central region, the lens behaves as a magnifying device to resolve the sources in subwavelength scale; while when the electromagnetic waves impinge on the semispherical lens from outside, they will be guided spirally inward.

Visible-Frequency Metasurface for Structuring and Spatially Multiplexing Optical Vortices

A multifocus optical vortex metalens, with enhanced signal-to-noise ratio, is presented, which focuses three longitudinal vortices with distinct topological charges at different focal planes. The design largely extends the flexibility of tuning the number of vortices and their focal positions for circularly polarized light in a compact device, which provides the convenience for the nanomanipulation of optical vortices.

Switchable Ultrathin Quarter-wave Plate in Terahertz Using Active Phase-change Metasurface

Metamaterials open up various exotic means to control electromagnetic waves and among them polarization manipulations with metamaterials have attracted intense attention. As of today, static responses of resonators in metamaterials lead to a narrow-band and single-function operation. Extension of the working frequency relies on multilayer metamaterials or different unit cells, which hinder the development of ultra-compact optical systems. In this work, we demonstrate a switchable ultrathin terahertz quarter-wave plate by hybridizing a phase change material, vanadium dioxide (VO2), with a metasurface. Before the phase transition, VO2 behaves as a semiconductor and the metasurface operates as a quarter-wave plate at 0.468 THz. After the transition to metal phase, the quarter-wave plate operates at 0.502 THz. At the corresponding operating frequencies, the metasurface converts a linearly polarized light into a circularly polarized light. This work reveals the feasibility to realize tunable/active and extremely low-profile polarization manipulation devices in the terahertz regime through the incorporation of such phase-change metasurfaces, enabling novel applications of ultrathin terahertz meta-devices.