Effective depth controls the nitrate removal rates in a water supply reservoir with a high nitrate load

The Occoquan Reservoir is part of an indirect potable reuse system where a water reclamation plant (WRP) discharges a nitrified product water to prevent the onset of anaerobic conditions in the bottom sediments during the summer months. The elongated narrow shape of the reservoir combined with water temperature gradients in the inlet results in density currents that enhance the transport of nitrate from the surface to the bottom waters. The morphology of the reservoir also causes a longitudinal change in the ratio of water volume to sediment area, herein defined as the effective depth (Z_ED). Field observations revealed that first-order nitrate removal rate coefficients (k) varied inversely with Z_ED, suggesting that the upper reaches of the reservoir have a higher potential for nitrate removal compared to the areas closer to the dam. A similar relationship between k (d^-1) and Z_ED was confirmed during laboratory experiments. Differences in k values were attributed mainly to the change in the nitrate supply rate as a result of the increase in water volume flowing over a specific sediment area, which limited nitrate transport to the sediments. The low variability found between the mass transfer coefficients for nitrate (Coefficient of Variation = 0.25) suggested a nearly constant biotic nitrogen removal and confirmed that k values were mainly affected by changes in Z_ED. Finally, similarities in k values between field and laboratory samples with similar Z_ED values suggested that different segments of natural systems may be properly downscaled to laboratory-sized configurations for analytical purposes by means of the Z_ED concept.

Multiple Method Analysis of TiO2 Nanoparticle Uptake in Rice (Oryza sativa L.) Plants

Understanding the translocation of nanoparticles (NPs) into plants is challenging because qualitative and quantitative methods are still being developed and the comparability of results among different methods is unclear. In this study, uptake of titanium dioxide NPs and larger bulk particles (BPs) in rice plant (Oryza sativa L.) tissues was evaluated using three orthogonal techniques: electron microscopy, single-particle inductively coupled plasma mass spectroscopy (spICP-MS) with two different plant digestion approaches, and total elemental analysis using ICP optical emission spectroscopy. In agreement with electron microscopy results, total elemental analysis of plants exposed to TiO₂ NPs and BPs at 5 and 50 mg/L concentrations revealed that TiO₂ NPs penetrated into the plant root and resulted in Ti accumulation in above ground tissues at a higher level compared to BPs. spICP-MS analyses revealed that the size distributions of internalized particles differed between the NPs and BPs with the NPs showing a distribution with smaller particles. Acid digestion resulted in higher particle numbers and the detection of a broader range of particle sizes than the enzymatic digestion approach, highlighting the need for development of robust plant digestion procedures for NP analysis. Overall, there was agreement among the three techniques regarding NP and BP penetration into rice plant roots and spICP-MS showed its unique contribution to provide size distribution information.

Separation, Sizing, and Quantitation of Engineered Nanoparticles in an Organism Model Using Inductively Coupled Plasma Mass Spectrometry and Image Analysis

For environmental studies assessing uptake of orally ingested engineered nanoparticles (ENPs), a key step in ensuring accurate quantification of ingested ENPs is efficient separation of the organism from ENPs that are either nonspecifically adsorbed to the organism and/or suspended in the dispersion following exposure. Here, we measure the uptake of 30 and 60 nm gold nanoparticles (AuNPs) by the nematode, Caenorhabditis elegans, using a sucrose density gradient centrifugation protocol to remove noningested AuNPs. Both conventional inductively coupled plasma mass spectrometry (ICP-MS) and single particle (sp)ICP-MS are utilized to measure the total mass and size distribution, respectively, of ingested AuNPs. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) imaging confirmed that traditional nematode washing procedures were ineffective at removing excess suspended and/or adsorbed AuNPs after exposure. Water rinsing procedures had AuNP removal efficiencies ranging from 57 to 97% and 22 to 83%, while the sucrose density gradient procedure had removal efficiencies of 100 and 93 to 98%, respectively, for the 30 and 60 nm AuNP exposure conditions. Quantification of total Au uptake was performed following acidic digestion of nonexposed and Au-exposed nematodes, whereas an alkaline digestion procedure was optimized for the liberation of ingested AuNPs for spICP-MS characterization. Size distributions and particle number concentrations were determined for AuNPs ingested by nematodes with corresponding confirmation of nematode uptake via high-pressure freezing/freeze substitution resin preparation and large-area SEM imaging. Methods for the separation and in vivo quantification of ENPs in multicellular organisms will facilitate robust studies of ENP uptake, biotransformation, and hazard assessment in the environment.

Using light scattering to evaluate the separation of polydisperse nanoparticles

The analysis of natural and otherwise complex samples is challenging and yields uncertainty about the accuracy and precision of measurements. Here we present a practical tool to assess relative accuracy among separation protocols for techniques using light scattering detection. Due to the highly non-linear relationship between particle size and the intensity of scattered light, a few large particles may obfuscate greater numbers of small particles. Therefore, insufficiently separated mixtures may result in an overestimate of the average measured particle size. Complete separation of complex samples is needed to mitigate this challenge. A separation protocol can be considered improved if the average measured size is smaller than a previous separation protocol. Further, the protocol resulting in the smallest average measured particle size yields the best separation among those explored. If the differential in average measured size between protocols is less than the measurement uncertainty, then the selected protocols are of equivalent precision. As a demonstration, this assessment metric is applied to optimization of cross flow (V(x)) protocols in asymmetric flow field flow fractionation (AF(4)) separation interfaced with online quasi-elastic light scattering (QELS) detection using mixtures of polystyrene beads spanning a large size range. Using this assessment metric, the V(x) parameter was modulated to improve separation until the average measured size of the mixture was in statistical agreement with the calculated average size of particles in the mixture. While we demonstrate this metric by improving AF(4) V(x) protocols, it can be applied to any given separation parameters for separation techniques that employ dynamic light scattering detectors.

Dynamics of silver nanoparticle release from wound dressings revealed via in situ nanoscale imaging

The use of silver nanoparticles (AgNPs) in textiles for enhanced anti-microbial properties has led to concern about their release and impact on both human and environmental health. Here a novel method for in situ visualization of AgNP release from silver-impregnated wound dressings is introduced. By combining an environmental scanning electron microscope, a gaseous analytical detector and a peltier cooling stage, this technique provides near-instantaneous nanoscale characterization of interactions between individual water droplets and AgNPs. We show that dressings with different silver application methods have very distinct AgNP release dynamics. Specifically, water condensation on dressings with AgNP deposited directly on the fiber surface resulted in substantial and rapid AgNP release. By comparison, AgNP release from wound dressing with nanoparticles grown, not deposited, from the fiber surface was either much slower or negligible. Our methodology complements standard bulk techniques for studying of silver release from fabrics by providing dynamic nanoscale information about mechanisms governing AgNP release from individual fibers. Thus coupling these nano and macro-scale methods can provide insight into how the wound dressing fabrication could be engineered to optimize AgNP release for different applications.

Titanium distribution in swimming pool water is dominated by dissolved species

The increased use of titanium dioxide nanoparticles (nano-TiO2) in consumer products such as sunscreen has raised concerns about their possible risk to human and environmental health. In this work, we report the occurrence, size fractionation and behavior of titanium (Ti) in a children's swimming pool. Size-fractionated samples were analyzed for Ti using ICP-MS. Total titanium concentrations ([Ti]) in the pool water ranged between 21 μg/L and 60 μg/L and increased throughout the 101-day sampling period while [Ti] in tap water remained relatively constant. The majority of [Ti] was found in the dissolved phase (<1 kDa), with only a minor fraction of total [Ti] being considered either particulate or microparticulate. Simple models suggest that evaporation may account for the observed variation in [Ti], while sunscreen may be a relevant source of particulate and microparticule Ti. Compared to diet, incidental ingestion of nano-Ti from swimming pool water is minimal.

Polyelectrolyte and silver nanoparticle modification of microfiltration membranes to mitigate organic and bacterial fouling

Membrane fouling remains one of the most problematic issues surrounding membrane use in water and wastewater treatment applications. Organic and biological fouling contribute to irreversible fouling and flux decline in these processes. The aim of this study was to reduce both organic and biological fouling by modifying the surface of commercially available poly(ether sulfone) (PES) membranes using the polyelectrolyte multilayer modification method with poly(styrenesulfonate) (PSS), poly(diallyldimethylammonium chloride) (PDADMAC), and silver nanoparticles (nanoAg) integrated onto the surface as stable, thin (15 nm) films. PSS increases the hydrophilicity of the membrane and increases the negative surface charge, while integration of nanoAg into the top PSS layer imparts biocidal characteristics to the modified surface. Fouling was simulated by filtering aqueous solutions of humic acid (5 and 20 mg L(-1)), a suspension of Escherichia coli (10(6) colony-forming units (CFU) mL(-1)), and a mixture of both foulants through unmodified and modified PES membranes under batch conditions. Filtration and cleaning studies confirmed that the modification significantly reduced organic and biological fouling.

Detection and speciation of brominated flame retardants in high-impact polystyrene (HIPS) polymers

Polymeric materials have been suggested as possible environmental sources of persistent organic pollutants such as flame retardants. In situ, micrometre-scale characterization techniques for polymer matrix containing flame retardants may provide some insight into the dominant environmental transfer mechanism(s) of these brominated compounds. In this work, we demonstrate that micro X-ray fluorescence spectroscopy (μXRF), focused ion beam scanning electron microscopy (FIB-SEM) combined with energy dispersive X-ray spectroscopy (EDS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS) are promising techniques for the elemental and chemical identification of brominated fire retardant compounds (such as the deca-congener of polybrominated diphenyl ether, BDE-209) within polymeric materials (e.g. high-impact polystyrene or HIPS). Data from μXRF demonstrated that bromine (Br) inclusions were evenly distributed throughout the HIPS samples, whereas FIB SEM-EDS analysis revealed that small antimony (Sb) and Br inclusions are present, and regionally higher concentrations of Br surround the Sb inclusions (compared to the bulk material). Four prominent mass-to-charge ratio peaks (m/z 485, 487, 489 and 491) that correspond to BDE-209 were identified by ToF-SIMS and can be used to chemically distinguish this molecule on the surface of polymeric materials with respect to other brominated organic molecules. These techniques can be important in any study that investigates the route of entry to the environmental surroundings of BDE-containing materials.

Copper oxide nanoparticle mediated DNA damage in terrestrial plant models

Engineered nanoparticles, due to their unique electrical, mechanical, and catalytic properties, are presently found in many commercial products and will be intentionally or inadvertently released at increasing concentrations into the natural environment. Metal- and metal oxide-based nanomaterials have been shown to act as mediators of DNA damage in mammalian cells, organisms, and even in bacteria, but the molecular mechanisms through which this occurs are poorly understood. For the first time, we report that copper oxide nanoparticles induce DNA damage in agricultural and grassland plants. Significant accumulation of oxidatively modified, mutagenic DNA lesions (7,8-dihydro-8-oxoguanine; 2,6-diamino-4-hydroxy-5-formamidopyrimidine; 4,6-diamino-5-formamidopyrimidine) and strong plant growth inhibition were observed for radish (Raphanus sativus), perennial ryegrass (Lolium perenne), and annual ryegrass (Lolium rigidum) under controlled laboratory conditions. Lesion accumulation levels mediated by copper ions and macroscale copper particles were measured in tandem to clarify the mechanisms of DNA damage. To our knowledge, this is the first evidence of multiple DNA lesion formation and accumulation in plants. These findings provide impetus for future investigations on nanoparticle-mediated DNA damage and repair mechanisms in plants.

Potential release pathways, environmental fate, and ecological risks of carbon nanotubes

Carbon nanotubes (CNTs) are currently incorporated into various consumer products, and numerous new applications and products containing CNTs are expected in the future. The potential for negative effects caused by CNT release into the environment is a prominent concern and numerous research projects have investigated possible environmental release pathways, fate, and toxicity. However, this expanding body of literature has not yet been systematically reviewed. Our objective is to critically review this literature to identify emerging trends as well as persistent knowledge gaps on these topics. Specifically, we examine the release of CNTs from polymeric products, removal in wastewater treatment systems, transport through surface and subsurface media, aggregation behaviors, interactions with soil and sediment particles, potential transformations and degradation, and their potential ecotoxicity in soil, sediment, and aquatic ecosystems. One major limitation in the current literature is quantifying CNT masses in relevant media (polymers, tissues, soils, and sediments). Important new directions include developing mechanistic models for CNT release from composites and understanding CNT transport in more complex and environmentally realistic systems such as heteroaggregation with natural colloids and transport of nanoparticles in a range of soils.

Association of quantum dot nanoparticles with Pseudomonas aeruginosa biofilm

Quantum dots (QDs) of two different surface chemistries (carboxyl [COOH] and polyethylene glycol [PEG] modified) were utilized to determine the impact of surface functionality on QD mobility and distribution in Pseudomonas aeruginosa PAO1 biofilms. Confocal laser scanning microscopy was utilized to evaluate QD association with biofilm components (proteins, cells, and polysaccharides). Quantum dots did not preferentially associate with cell surfaces compared but did colocalize with extracellular proteins in the biofilm matrix. Neither PEG nor COOH QDs were found to be internalized by individual bacterial cells. Neither QD functionality nor flow rate of QD application (0.3 mL min(-1) or 3.0 mL min(-1)) resulted in a marked difference in QD association with P. aeruginosa biofilms. However, center of density determinations indicated COOH QDs could more easily penetrate the biofilm matrix by diffusion than PEG QDs. Biofilms with PEG QDs associated had rougher polysaccharide layers and rougher cell distribution than biofilms with COOH QDs. This work suggests natural biofilms may serve as deposition locations in natural and engineered environmental systems, and biofilm structural parameters may change based on exposure to nanomaterials of varied physical characteristics.

Dynamics and mechanisms of quantum dot nanoparticle cellular uptake

BACKGROUND

The rapid growth of the nanotechnology industry and the wide application of various nanomaterials have raised concerns over their impact on the environment and human health. Yet little is known about the mechanism of cellular uptake and cytotoxicity of nanoparticles. An array of nanomaterials has recently been introduced into cancer research promising for remarkable improvements in diagnosis and treatment of the disease. Among them, quantum dots (QDs) distinguish themselves in offering many intrinsic photophysical properties that are desirable for targeted imaging and drug delivery.

RESULTS

We explored the kinetics and mechanism of cellular uptake of QDs with different surface coatings in two human mammary cells. Using fluorescence microscopy and laser scanning cytometry (LSC), we found that both MCF-7 and MCF-10A cells internalized large amount of QD655-COOH, but the percentage of endocytosing cells is slightly higher in MCF-7 cell line than in MCF-10A cell line. Live cell fluorescent imaging showed that QD cellular uptake increases with time over 40 h of incubation. Staining cells with dyes specific to various intracellular organelles indicated that QDs were localized in lysosomes. Transmission electron microscopy (TEM) images suggested a potential pathway for QD cellular uptake mechanism involving three major stages: endocytosis, sequestration in early endosomes, and translocation to later endosomes or lysosomes. No cytotoxicity was observed in cells incubated with 0.8 nM of QDs for a period of 72 h.

CONCLUSIONS

The findings presented here provide information on the mechanism of QD endocytosis that could be exploited to reduce non-specific targeting, thereby improving specific targeting of QDs in cancer diagnosis and treatment applications. These findings are also important in understanding the cytotoxicity of nanomaterials and in emphasizing the importance of strict environmental control of nanoparticles.

Impact of source water quality on multiwall carbon nanotube coagulation

Potable water treatment facilities may become an important barrier in limiting human exposure to engineered nanoparticles (ENPs) as ENPs begin to contaminate natural aquatic systems. Coagulation of ENPs will likely be a major process that controls the ENP fate and the subsequent removal in the aqueous phase. The influence that source water quality has on ENP coagulation is still relatively unknown. The current study uses a 2(3) x 2(4-1) fractional factorial design to identify seven key surface water constituents that affect multiwall carbon nanotube (MWCNT) coagulation. These seven factors include: influent concentrations of kaolin, organic matter (OM), alginate, and MWCNTs; type and dosage of coagulant; and method of MWCNT stabilization. MWCNT removal was most affected by coagulant type and dosage, with alum outperforming ferric chloride at circumneutral pH. None of the other factors were universally significant but instead depended on coagulant type, dose, and method of stabilization. In all cases where factors were found to have a significant impact on MWCNT removal, however, the relationship was consistent: higher influent concentrations of kaolin and alginate improved MWCNT removal while higher influent concentrations of OM hindered MWCNT coagulation. Once MWCNTs are released into the natural environment, their coagulation behavior will be determined by the type and quantity of pollutants (i.e., factors) present in the aquatic environment and are governed by the same mechanisms that influence the colloidal stability of "natural" nanoparticles.

Anti-HER2 IgY antibody-functionalized single-walled carbon nanotubes for detection and selective destruction of breast cancer cells

Background

Nanocarrier-based antibody targeting is a promising modality in therapeutic and diagnostic oncology. Single-walled carbon nanotubes (SWNTs) exhibit two unique optical properties that can be exploited for these applications, strong Raman signal for cancer cell detection and near-infrared (NIR) absorbance for selective photothermal ablation of tumors. In the present study, we constructed a HER2 IgY-SWNT complex and demonstrated its dual functionality for both detection and selective destruction of cancer cells in an in vitro model consisting of HER2-expressing SK-BR-3 cells and HER2-negative MCF-7 cells.

Methods

The complex was constructed by covalently conjugating carboxylated SWNTs with anti-HER2 chicken IgY antibody, which is more specific and sensitive than mammalian IgGs. Raman signals were recorded on Raman spectrometers with a laser excitation at 785 nm. NIR irradiation was performed using a diode laser system, and cells with or without nanotube treatment were irradiated by 808 nm laser at 5 W/cm² for 2 min. Cell viability was examined by the calcein AM/ethidium homodimer-1 (EthD-1) staining.

Results

Using a Raman optical microscope, we found the Raman signal collected at single-cell level from the complex-treated SK-BR-3 cells was significantly greater than that from various control cells. NIR irradiation selectively destroyed the complex-targeted breast cancer cells without harming receptor-free cells. The cell death was effectuated without the need of internalization of SWNTs by the cancer cells, a finding that has not been reported previously.

Conclusion

We have demonstrated that the HER2 IgY-SWNT complex specifically targeted HER2-expressing SK-BR-3 cells but not receptor-negative MCF-7 cells. The complex can be potentially used for both detection and selective photothermal ablation of receptor-positive breast cancer cells without the need of internalization by the cells. Thus, the unique intrinsic properties of SWNTs combined with high specificity and sensitivity of IgY antibodies can lead to new strategies for cancer detection and therapy.

Identifying transfer mechanisms and sources of decabromodiphenyl ether (BDE 209) in indoor environments using environmental forensic microscopy

Although the presence of polybrominated diphenyl ethers (PBDEs) in house dust has been linked to consumer products, the mechanism of transfer remains poorly understood. We conjecture that volatilized PBDEs will be associated with dust particles containing organic matter and will be homogeneously distributed in house dust. In contrast, PBDEs arising from weathering or abrasion of polymers should remain bound to particles of the original polymer matrix and will be heterogeneously distributed within the dust. We used scanning electron microscopy and othertools of environmental forensic microscopy to investigate PBDEs in dust, examining U.S. and U.K. dust samples with extremely high levels of BDE 209 (260-2600 microg/g), a nonvolatile compound at room temperature. We found that the bromine in these samples was concentrated in widely scattered, highly contaminated particles. In the house dust samples from Boston (U.S.), bromine was associated with a polymer/organic matrix. These results suggest that the BDE 209 was transferred to dust via physical processes such as abrasion or weathering. In conjunction with more traditional tools of environmental chemistry, such as gas chromatography/mass spectrometry (GC/MS), environmental forensic microscopy provides novel insights into the origins of BDE 209 in dust and their mechanisms of transfer from products.

Trophic transfer of nanoparticles in a simplified invertebrate food web

The unique chemical and physical properties of engineered nanomaterials that make them attractive for numerous applications also contribute to their unexpected behaviour in the environment and biological systems. The potential environmental risks, including their impact on aquatic organisms, have been a central argument for regulating the growth of the nanotechnology sector. Here we show in a simplified food web that carboxylated and biotinylated quantum dots can be transferred to higher trophic organisms (rotifers) through dietary uptake of ciliated protozoans. Quantum dot accumulation from the surrounding environment (bioconcentration) was limited in the ciliates and no quantum dot enrichment (biomagnification) was observed in the rotifers. Our findings indicate that dietary uptake of nanomaterials should be considered for higher trophic aquatic organisms. However, limited bioconcentration and lack of biomagnification may impede the detection of nanomaterials in invertebrate species.

In vivo and in vitro debromination of decabromodiphenyl ether (BDE 209) by juvenile rainbow trout and common carp

Decabromodiphenyl ether (BDE 209), the major congener in the high volume industrial flame retardant mixture "DecaBDE", has recently been shown to be metabolized by carp. To further explore this phenomenon, juvenile rainbow trout were exposed to BDE 209 via the diet for a five month period. Analysis of the whole body homogenate, liver, serum, and intestinal tissues revealed that BDE 209 accumulated in rainbow trout tissues and was most concentrated in the liver. In addition to BDE 209, several hepta-, octa-, and nonaBDE congeners also accumulated in rainbow trout tissues over the same period as a result of BDE 209 debromination. Based on the total body burden of the hepta- through decaBDE congeners, uptake of BDE 209 was estimated at 3.2%. Congener profiles were different among whole body homogenate, liver, and serum, with the whole body homogenates having a greater contribution of the debrominated biotransformation products. Extracts of the rainbow trout whole body homogenates were compared with extracts from a previous experiment with common carp. This comparison revealed that BDE 202 (2,2',3,3',5,5',6,6'-octabromodiphenyl ether) was a dominant debromination product in both studies. To determine whether the observed debromination was metabolically driven, liver microsomal fractions were prepared from both common carp and rainbow trout. Analysis of the microsomal fractions following incubation with BDE 209 revealed that rainbow trout biotransformed as much as 22% of the BDE 209 mass, primarily to octa- and nonaBDE congeners. In contrast, carp liver microsomes biotransformed up to 65% of the BDE 209 mass, primarily down to hexaBDE congeners. These microsomal incubations confirm a metabolic pathway for BDE 209 debromination.

Excitation-emission matrix fluorescence spectroscopy for natural organic matter characterization: a quantitative evaluation of calibration and spectral correction procedures

The influence of different data collection procedures and of wavelength-dependent instrumental biases on fluorescence excitation-emission matrix (EEM) spectral analysis of aqueous organic matter samples was investigated. Particular attention was given to fluorescence contours (spectral shape) and peak fluorescence intensities. Instrumental bias was evaluated by independently applying excitation and emission correction factors to the raw excitation and emission data, respectively. The peak fluorescence intensities of representative natural organic matter and tryptophan were significantly influenced by the application of excitation and emission spectral correction factors and by the manner in which the raw data was collected. Humification and fluorescence indices were also influenced by emission correction factors but were independent of reference (excitation) intensity normalization or correction. EEM surface contours were dependent on normalization of the fluorescence intensity to the reference intensity but were not influenced by either excitation or emission spectral correction factors. Authors should be explicit in how excitation and emission spectral correction procedures are implemented in their investigations, which will help to facilitate intra-laboratory comparisons and data sharing.

Characterizing natural organic material from the Occoquan Watershed (Northern Virginia, US) using fluorescence spectroscopy and PARAFAC

Surface water samples from the Occoquan Watershed (Virginia, US) were collected during summer baseflow conditions and characterized by excitation-emission matrix (EEM) fluorescence spectroscopy and parallel factor analysis (PARAFAC). Based on 55 samples, PARAFAC identified three individual fluorophore moieties, which were attributed to humic-like, fulvic-like, and protein-like materials. The categorization of these seemingly universal fluorophore moieties in aqueous systems was consistent with expected analyte concentrations that were independently measured by traditional wet chemistry techniques. The relative distribution of the three fluorophore fractions varied among the different land use catchments, especially in locations of known anthropogenic activity. Distinctive relationships between the fulvic-like and protein-like materials were observed for catchments known to be influenced by anthropogenic activity and those believed to reflect more natural environments, suggesting that this technique could be used to monitor human impact on aquatic systems. Finally, PARAFAC can be used to provide estimates (+/-30%) of select analyte concentrations in surface water. The results of this study support the use of EEM and PARAFAC analyses by watershed managers and other personnel interested in understanding organic matter behavior in aquatic systems.

Investigating activated sludge flocs using microanalytical techniques: demonstration of environmental scanning electron microscopy and time-of-flight secondary ion mass spectrometry for wastewater applications

Environmental scanning electron microscopy (ESEM) with an energy-dispersive X-ray spectrometer (EDS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were demonstrated to be useful analytical tools for investigating surface and bulk components of individual floc particles from both full- and bench-scale activated sludge systems. Detailed surface imaging of various hydrated biological floc particles by ESEM revealed substantial differences in surface features between treatment systems, while EDS identified spatial differences in the iron and the aluminum distributions. The ToF-SIMS spectra had signature fragments of protein and polysaccharide material from the floc surface, suggesting that this technique is capable of surface profiling extracellular polymeric substances. Principal-component analysis of the positive ion ToF-SIMS spectra from the mixed-liquor-suspended solid (MLSS) samples and reference aquatic organic materials found slight differences between the full- and bench-scale MLSS surface properties but substantial differences among MLSS and treated effluent from the same facility.

Impact of activated sludge-derived colloidal organic carbon on behavior of estrogenic agonist recombinant yeast bioassay

The impact of size-fractionated colloidal organic carbon (COC) originating from a biological wastewater treatment facility on the sensitivity of the yeast estrogen screen (YES) bioassay containing the human estrogen receptor (hER) gene was evaluated. Dose-response curves of serially diluted 17beta-estradiol (E2), both in the presence and absence of COC, were generated by the YES bioassay. The concentration of E2 leading to a 50% YES response (effective concentration 50%, or EC50) was used to evaluate quantitatively the estrogenic activity of the different COC-E2 mixtures. The EC50 values for all COC size fractions, including COC-free samples (<1 kD), were statistically greater than the controls using Milli-Q water. Normalized EC50 values significantly increased as a function of COC concentration for the larger size fractions (>0.22 microm), but were not significantly affected by smaller COC material at environmental levels (1-5 mg/L), while both colloidal polysaccharide concentrations and colloidal fluorophores (measured at an excitation/emission wavelength pair of 350 nm/450 nm) appear to have an important role in the sensitivity of the YES bioassay. Estimates of the colloid-associated E2 fraction did not predict accurately increases in EC50 values. Matrix effects of the specific environment being tested with the YES bioassay need to be evaluated closely due to the sensitivity of the hER and reporter plasmid.

Direct preparation of particles from liquid suspension for ESEM or SEM analysis

A simplified method for the preparation of particles from liquid suspensions has been developed. Particles are deposited directly on carbon planchets for rapid analysis by environmental scanning electron microscopy or by conventional scanning electron microscopy after an additional drying step. This is accomplished by filtering the liquid through thin carbon planchets. Three different grades of graphite were investigated for their suitability as the source material for these planchets. The high quality isomolded graphite is recommended for the filtration and direct observation of particles by electron microscopy. This technique is demonstrated for particles in hydraulic fluid and aquatic suspended particulate material from a natural water source.

Impact of reclaimed water on select organic matter properties of a receiving stream-fluorescence and perylene sorption behavior

Surface water samples obtained from the Bull Run tributary upstream and downstream of the Upper Occoquan Sewage Authority(UOSA) advanced wastewater reclamation facility (WRF) were characterized by fluorescence excitation-emission matrix (EEM) spectroscopy, and sorption coefficients (Kmoc) of macromolecular organic carbon isolates were quantified by fluorescence quenching. The EEM data revealed a signature fluorescence distribution in the downstream samples that was attributed to the presence of proteinlike material. The Kmoc values for upstream samples were consistently and significantly higher than those of corresponding downstream samples. There was a moderate correlation (R2 = 0.67) between log Kmoc and the molar extinction coefficient at 280 nm (E280) and a strong correlation (R2 = 0.96) between Kmoc and the proteinlike fluorescence region for macromolecular isolates with negligible quantum yields. This study demonstrates that organic matter downstream of the UOSA-WRF has unique fluorescence and perylene sorption characteristics compared to those of upstream organic matter during summer baseflow conditions. This implies that wastewater treatment facilities, including those advanced facilities designed to reclaim wastewater for indirect potable reuse, can influence the composition and behavior of organic matter in a receiving stream.

The impact of floc size on respiration inhibition by soluble toxicants--a comparative investigation

Activated sludge facilities are susceptible to upset by shock loads of toxic compounds. We hypothesized that floc size plays an important role in determining the sensitivity of mixed liquor to shock by cadmium and 2,4-dinitrophenol (DNP). To test this hypothesis, heterotrophic respiration inhibition experiments were conducted using mixed liquor from a pilot-scale membrane bioreactor (MBR) and full-scale activated sludge (FSAS) facility with gravity settling secondary clarifiers that were operated under similar process conditions. MBR mixed liquor flocs were both 41% smaller and 2 and 1.25 times more sensitive to equivalent soluble cadmium and DNP concentrations, respectively, compared to FSAS mixed liquor flocs. Similarly, FSAS mixed liquor that had been sheared (resulting in a smaller average floc diameter) was 1.5 times more sensitive to soluble cadmium than non-sheared FSAS mixed liquor. These results suggest that activated sludge process conditions that create smaller floc particles, such as the use of membranes for liquid-solid separation, are more susceptible to upset events caused by shock loads of cadmium and DNP. The particle size distribution (PSD) and average floc diameter of a mixed liquor suspension should be measured and reported when stating the inhibition concentration of a specific toxicant.

A comparison of membrane bioreactor and conventional-activated-sludge mixed liquor and biosolids characteristics

Characteristics and behavior of raw and digested mixed liquor derived from a membrane bioreactor (MBR) and a full-scale activated-sludge (FSAS) facility were compared. The accumulation of nondegradable chemical oxygen demand in the MBR appears to play an important role in increasing the observed biological yield coefficient (Y(obs)), reducing average floc size, decreasing total suspended solids/total solids and volatile suspended solids/volatile solids (VS) ratios, and reducing specific-oxygen-uptake rates of the mixed liquor relative to FSAS-derived biological solids. Membrane bioreactor sludges exhibited lower VS destruction following 30 days mesophilic-anaerobic and aerobic digestion when compared to FSAS sludges. Significant deterioration in dewatering behavior was observed for the FSAS biosolids after anaerobic digestion and, to a lesser extent, following aerobic digestion. In comparison, digestion had a small affect on dewatering efficiency and conditioner requirements for MBR biosolids. Full-scale facilities using membrane separation may need to tailor digestion and dewatering processes to the specific characteristics of MBR sludges.

Evaluation of membrane bioreactor process capabilities to meet stringent effluent nutrient discharge requirements

A six-stage membrane bioreactor (MBR) pilot plant was operated to determine and demonstrate the capability of this process to produce a low-nutrient effluent, consistent with the nutrient reduction goals for the Chesapeake Bay. Biological nitrogen removal was accomplished using a multistage configuration with an initial anoxic zone (using the carbon in the influent wastewater), an aerobic zone (where nitrification occurred), a downstream anoxic zone (where methanol was added as a carbon source), and the aerated submerged membrane zone. The capability to reliably reduce effluent total nitrogen to less than 3 mg/L as nitrogen (N) was demonstrated. A combination of biological (using an initial anaerobic zone) and chemical (using alum) phosphorus removal was used to achieve effluent total phosphate concentrations reliably less than 0.1 mg/L as phosphorus (P) and as low as 0.03 mg/L as P. Alum addition also appeared to enhance the filtration characteristics of the MBR sludge and to reduce membrane fouling. Aeration of the submerged membranes results in thickened sludge with a high dissolved oxygen concentration (approaching saturation), which can be recycled to the main aeration zone rather than to an anoxic or anaerobic zone to optimize biological nutrient removal. Biological nutrient removal was characterized using the International Water Association Activated Sludge Model No. 2d. The stoichiometry of chemical phosphorus removal was also consistent with conventional theory and experience. The characteristics of the solids produced in the MBR were compared with those of a parallel full-scale conventional biological nitrogen removal process and were generally found to be similar. These results provide valuable insight to the design and operating characteristics of MBRs intended to produce effluents with very low nutrient concentrations.

Effect of alum addition on the performance of submerged membranes for wastewater treatment

The effect of aluminum sulfate (alum) addition on membrane performance was investigated, with a particular focus on membrane fouling. During initial operation, alum was added and the performance monitored. After terminating alum addition, the transmembrane pressure (TMP), which is indicative of membrane resistance to flow or fouling, increased. Accompanying the increase in TMP was an increase in the organic nonsettleable fraction (colloidal + dissolved) content of the mixed liquor and deterioration of permeate quality and floc strength. Permeate polysaccharide concentrations increased significantly, suggesting a preferential binding of solution polysaccharides by alum. Upon reinitiating alum addition, the TMP only partially recovered, indicating some irreversible fouling, while mixed liquor nonsettleable organic material, permeate quality, and floc strength returned to initial levels. These results suggest that direct alum addition to membrane bioreactors can improve membrane performance by reducing the organic fouling material and improving floc structure and strength. It appears that bulk liquid polysaccharides may contribute to irreversible membrane fouling, and this fraction can be efficiently controlled through the alum addition.

Investigation of sorption behavior between pyrene and colloidal organic carbon from activated sludge processes

The sorption behavior of pyrene for different size fractions of colloidal organic carbon (COC) originating from two biological wastewater treatment facilities (a full-scale activated sludge system (FSAS) and a membrane bioreactor (MBR)) was investigated by fluorescence quenching. Fluorescence lifetime measurements demonstrated a dynamic quenching component in all samples, including the colloidal-free filtrates. COC sorption coefficients (Kcoc) for pyrene ranged from <1 x 10(3) L/kgcoc to 80 x 10(3) L/kgcoc and were comparable to values obtained in the literature for natural organic matter. Both linear and nonlinear behaviors were observed in the Freundlich-described converted isotherms (n = 0.89-2.1). The aromatic content of COC was quantified by the molar extinction coefficient at 280 nm (e280). Good correlations were observed between COC-pyrene sorption coefficients and e280 coefficients, suggesting that e280 may be a useful tool for predicting colloidal transport of hydrophobic organic compounds (HOCs) from activated sludge systems. The removal of COC from treated effluents may appreciably reduce the concentrations of HOCs discharged to receiving streams.

Sorption of 17beta-estradiol and 17alpha-ethinylestradiol by colloidal organic carbon derived from biological wastewater treatment systems

Sorption coefficients (K(COC)) between 17beta-estradiol (E2), 17alpha-ethinylestradiol (EE2) and size-fractionated colloidal organic carbon (COC) derived from two biological wastewater treatment facilities were quantified by fluorescence quenching. The two wastewater treatment systems included a full-scale activated sludge system (FSAS) and a membrane bioreactor (MBR). The K(COC) coefficients were highly variable and ranged between (<1 to 179) x 10(3) L/kgCOC for E2 and (<1 to 430) x 10(3) L/kgCOC for EE2 and were higher than expected from the analytes octanol-water partition coefficient. Correlations between the molar extinction coefficients measured at 280 nm (e280) and K(COC) coefficients were weak but stronger for E2 compared to EE2. Attempts at correlating sorption behavior with colloidal protein and polysaccharide concentrations were only marginally successful (r2 approximately 0.4). These low correlations suggest that aromatic content, protein, or polysaccharide concentration can not adequately explain E2 and EE2 sorption behavior to COC and that other fractions of the organic matter pool play an important role in binding. A substantial portion of the aqueous E2 and EE2 concentrations (up to 60%) may be associated with colloidal material, suggesting that COC may play a role in the fate and transport of E2 and EE2 during the activated sludge process.

Estrogen receptor agonist fate during wastewater and biosolids treatment processes: a mass balance analysis

The estrogen receptor agonist fate of hexane extracts from various locations and phases (liquid and solid) within one pilot-scale and two full-scale wastewater treatment facilities were examined by use of the receptor-binding yeast estrogen screen (YES assay). Estrogenic activity was found in samples that contained a high concentration of biological solids and was particularly high in the suspended solid fraction from biosolids treatment facilities. Mass balances revealed that the estrogenic activity associated with the processed biosolids constituted between 5 and 10% of the influent estrogenic activity, while the treated liquid effluent prior to disinfection contained between 26 and 43%. Overall, this suggests that between 51 and 67% of the estrogenic activity contained in the influent wastewater was either biodegraded during the wastewater or biosolids treatment processes or was unavailable to the extraction/detection procedure. In both aerobic and anaerobic digestion, mass balances revealed an increase in estrogenic activity as treatment progressed and biosolids destruction occurred. The estrogenic activity associated with the solid phase decreased during mesophilic aerobic digestion. A correlation was observed between the estrogenicity of mixed liquor suspended solids and aerobic sludge age and suggests that wastewater treatment facilities can be designed and operated to enhance the sorption and removal of estrogenic compounds from the liquid phase.