1
|
Eco-friendly extraction of antibacterial compounds from enriched olive pomace: a design-of-experiments approach to sustainability. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:25616-25636. [PMID: 38478307 DOI: 10.1007/s11356-024-32770-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/01/2023] [Accepted: 02/29/2024] [Indexed: 04/19/2024]
Abstract
The increasing interest in utilizing olive pomace bioactive molecules to advance functional elements and produce antioxidant and antimicrobial additives underscores the need for eco-friendly extraction and purification methods. This study aims to develop an eco-friendly extraction method to evaluate the effect of extraction parameters on the recovery of bioactive molecules from enriched olive pomace. The effects were identified based on total phenolic and flavonoid contents and antioxidant activity, employing a design of experimental methodology. The positive and the negative simultaneous effects showed that among the tested enrichments, those incorporating Nigella Sativa, dates, and coffee demonstrated superior results in terms of the measured responses. Furthermore, chromatographic analysis unveiled the existence of intriguing compounds such as hydroxytyrosol, tyrosol, and squalene in distinct proportions. Beyond this, our study delved into the structural composition of the enriched pomace through FTIR analysis, providing valuable insights into the functional groups and chemical bonds present. Concurrently, antimicrobial assays demonstrated the potent inhibitory effects of these enriched extracts against various microorganisms, underscoring their potential applications in food preservation and safety. These findings highlight enriched olive pomace as a valuable reservoir of bioactive molecules for food products since they can enhance their anti-oxidative activity and contribute to a sustainable circular economy model for olive oil industries.
Collapse
|
2
|
Novel rod-like [Cu(phen) 2(OAc)]·PF 6 complex for high-performance visible-light-driven photocatalytic degradation of hazardous organic dyes: DFT approach, Hirshfeld and fingerprint plot analysis. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 350:119545. [PMID: 37995482 DOI: 10.1016/j.jenvman.2023.119545] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/17/2023] [Revised: 10/19/2023] [Accepted: 11/04/2023] [Indexed: 11/25/2023]
Abstract
A novel octahedral distorted coordination complex was formed from a copper transition metal with a bidentate ligand (1,10-Phenanthroline) and characterized by Ultraviolet-visible spectroscopy, Ultraviolet-visible diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller, Field emission scanning electron microscopy, and Single-crystal X-ray diffraction. The Hirshfeld surface and fingerprint plot analyses were conducted to determine the interactions between atoms in the Cu(II) complex. DFT calculations showed that the central copper ion and its coordinated atoms have an octahedral geometry. The Molecular electrostatic potential (MEP) map indicated that the copper (II) complex is an electrophilic compound that can interact with negatively charged macromolecules. The HOMO-LUMO analysis demonstrated the π nature charge transfer from acetate to phenanthroline. The band gap of [Cu(phen)2(OAc)]·PF6 photocatalyst was estimated to be 2.88 eV, confirming that this complex is suitable for environmental remediation. The photocatalytic degradation of erythrosine, malachite green, methylene blue, and Eriochrome Black T as model organic pollutants using the prepared complex was investigated under visible light. The [Cu(phen)2(OAc)]·PF6 photocatalyst exhibited degradation 94.7, 90.1, 82.7, and 74.3 % of malachite green, methylene blue, erythrosine, and Eriochrome Black T, respectively, under visible illumination within 70 min. The results from the Langmuir-Hinshelwood kinetic analysis demonstrated that the Cu(II) complex has a higher efficiency for the degradation of cationic pollutants than the anionic ones. This was attributed to surface charge attraction between photocatalyst and cationic dyes promoting removal efficiency. The reusability test indicated that the photocatalyst could be utilized in seven consecutive photocatalytic degradation cycles with an insignificant decrease in efficiency.
Collapse
|
3
|
Adsorption of perfluorooctanoic carboxylic and heptadecafluorooctane sulfonic acids via magnetic chitosan: isotherms and modeling. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:118410-118417. [PMID: 37910375 DOI: 10.1007/s11356-023-30600-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2023] [Accepted: 10/18/2023] [Indexed: 11/03/2023]
Abstract
This paper evaluates the adsorption mechanism of perfluorooctanoic carboxylic acid (PFCA) and heptadecafluorooctane sulfonic acid (HFOSA) on magnetic chitosan for the first time via a statistical physics modeling. Magnetic chitosan (MC-CoFe2O4) was produced from shrimp wastes and used in standard batch adsorption systems to remove PFCA and HFOSA. The experimental isotherms indicated that the maximum adsorption capacities ranged from 14 to 27.12 mg/g and from 19.16 to 45.12 mg/g for PFCA and HFOSA, respectively, where an exothermic behavior was observed for both compounds. The adsorption data were studied via an advanced model hypothesizing that a multilayer process occurred for these adsorption systems. This theoretical approach indicated that the total number of formed layers of PFCA and HFOSA adsorbates is about 3 (Nt = 2.83) at high temperatures (328 K) where a molecular aggregation process was noted during the adsorption. The maximum saturation-multilayer adsorption of PFCA and HFOSA on magnetic chitosan was 30.77 and 50.26 mg/g, respectively, and the corresponding adsorption mechanisms were successfully investigated. Two energies were responsible for the formed adsorbate layer directly on the surface and the vertical layers were computed and interpreted, reflecting that physical interactions were involved to bind these molecules on the adsorbent surface at different temperatures where the calculated adsorption energies ranged from 14 to 31 kJ/mol. Overall, this work provides theoretical insights to understand the adsorption mechanism of PFCA and HFOSA using the statistical physics modeling and its results can be used to improve the adsorbent performance for engineering applications.
Collapse
|
4
|
Novel gC 3N 4/MgZnAl-MMO derived from LDH for solar-based photocatalytic ammonia production using atmospheric nitrogen. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:90383-90396. [PMID: 36585579 DOI: 10.1007/s11356-022-24997-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/09/2022] [Accepted: 12/22/2022] [Indexed: 06/17/2023]
Abstract
The development of catalysis technologies for sustainable environmental applications, especially an alternative to ammonia (NH3) production under the Haber-Bosch process, has gained a lot of scope in recent days. The current work demonstrated a green synthesis of graphitic carbon nitride (gC3N4) containing magnesium-zinc-aluminium mixed metal oxides (MgZnAl-MMO) derived from layered double hydroxide (LDH) for visible light aided catalytic production of ammonia. Pyrolysis-hydrothermal techniques were adopted for the synthesis and fabrication of the gC3N4/MgZnAl-MMO catalytic composite. Characterization results of field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), UV-visible spectroscopy, photoluminescence (PL), etc. showed the desired properties and functionalities like semi-crystalline structure with rough surface morphology that enhance the sorption reactions. Catalytic composite gC3N4/MgZnAl-MMO showed a bandgap energy of 2.16 eV that is considerably shifted toward the visible range when compared to gC3N4 (2.39 eV) and MgZnAl-MMO (2.93 eV). The results were also well complied with XPS results obtained that promote solar-based photocatalysis. The gC3N4/MgZnAl-MMO assisted photocatalytic production of NH3 in an aqueous media proved to be acceptable by the production of a maximum 47.56 μmol/L NH3 under visible spectrum employing a light emitting diode (LED) source. The results showed that the advancement of catalyst for desired functionalities and NH3 production using LED simulating solar light-aided catalysis would be an alternative to the Haber-Bosch process and solar-based sustainable processes for NH3 production.
Collapse
|
5
|
Photocatalytic transfer of aqueous nitrogen into ammonia using nickel-titanium-layered double hydroxide. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:90341-90351. [PMID: 36520285 DOI: 10.1007/s11356-022-24726-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2022] [Accepted: 12/07/2022] [Indexed: 06/17/2023]
Abstract
The development of solar-driven transfer of atmospheric nitrogen into ammonia is one of the green and sustainable strategies in industrial ammonia production. Nickel-titanium-layered double hydroxide (NiTi-LDH) was synthesised using the soft-chemical process for atmospheric nitrogen fixation application under photocatalysis in an aqueous system. NiTi-LDH was investigated using advanced characterisation techniques and confirmed the potential oxygen vacancies and/or surface defects owing to better photocatalytic activity under the solar spectrum. It also exhibited a bandgap of 2.8 eV that revealed its promising visible-light catalytic activities. A maximum of 33.52 µmol L-1 aqueous NH3 was obtained by continuous nitrogen (99.9% purity) supply into the photoreactor under an LED light source. Atmospheric nitrogen supply (≈78%) yielded 14.67 µmol L-1 aqueous NH3 within 60 min but gradually reduced to 3.6 µmol L-1 at 330 min. Interestingly, in weak acidic pH, 20.90 µmol L-1 NH3 was produced compared to 11.51 µmol L-1 NH3 in basic pH. The application of NiTi-LDH for visible-light harvesting capability and photoreduction of atmospheric N2 into NH3 thereby opens a new horizon of eco-friendly NH3 production using natural sunlight as alternative driving energy.
Collapse
|
6
|
Electrosorption of phenolic compounds by carbon sheet electrode from zinc chloride functionalized activated carbon from pomegranate husk. CHEMICAL ENGINEERING JOURNAL 2023; 455:140800. [DOI: 10.1016/j.cej.2022.140800] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/21/2023]
|
7
|
Photoelectrochemical properties and reactivity of supported titanium NTs for bacterial inactivation and organic pollutant removal. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:10733-10744. [PMID: 36083373 DOI: 10.1007/s11356-022-22923-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/12/2022] [Accepted: 09/03/2022] [Indexed: 06/15/2023]
Abstract
In this work, we report on the effect of anodization time on the morphology, optical, and photocatalytic properties of TiO2 nanotubes (NTs) allowing bacterial inactivation and two organic pollutant degradation under low-intensity solar-simulated light. Scanning electron microscopy (SEM) showed that the length of the TiO2 NTs increased from 2.8 to 25.8 μm as anodization time was increased from 15 to 300 min at 60 V, respectively. The X-ray diffraction (XRD) patterns showed that all samples crystallize in the anatase phase after annealing at 400 °C for 3 h. Samples anodized for 30 and 60 min exhibit low diffuse reflection at 400 nm, which was attributed to the disorder-induced exciton scattering at the molecular level. The intensity of the photoluminescence (PL) spectra was found to increase as the length of the NTs increases up to a maximum anodization time of 300 min, revealing the contribution of bulk excitonic states. A maximum photoelectric conversion efficiency of 0.55% was obtained at a potential of - 0.5 V vs. Ag/AgCl for TiO2 NTs anodized for 60 min. The optimized NTs (anodized for 60 min) showed a photocatalytic bacterial inactivation of a magnitude of 6 log within 360 min and a degradation of indole and methylene blue (MB) under low-intensity solar-simulated light (50 mW/cm2). The stability of the prepared catalyst was tested over several cycles.
Collapse
|
8
|
Combined conversion of lignocellulosic biomass into high-value products with ultrasonic cavitation and photocatalytic produced reactive oxygen species - A review. BIORESOURCE TECHNOLOGY 2023; 368:128333. [PMID: 36403911 DOI: 10.1016/j.biortech.2022.128333] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/25/2022] [Revised: 11/07/2022] [Accepted: 11/11/2022] [Indexed: 06/16/2023]
Abstract
The production of high-value products from lignocellulosic biomass is carried out through the selective scission of crosslinked CC/CO bonds. Nowadays, several techniques are applied to optimize biomass conversion into desired products with high yields. Photocatalytic technology has been proven to be a valuable tool for valorizing biomass at mild conditions. The photoproduced reactive oxygen species (ROSs) can initiate the scission of crosslinked bonds and form radical intermediates. However, the low mass transfer of the photocatalytic process could limit the production of a high yield of products. The incorporation of ultrasonic cavitation in the photocatalytic system provides an exceptional condition to boost the fragmentation and transformation of biomass into the desired products within a lesser reaction time. This review critically discusses the main factors governing the application of photocatalysis for biomass valorization and tricks to boost the selectivity for enhancing the yield of desired products. Synergistic effects obtained through the combination of sonolysis and photocatalysis were discussed in depth. Under ultrasonic vibration, hot spots could be produced on the surface of the photocatalysts, improving the mass transfer through the jet phenomenon. In addition, shock waves can assist the dissolution and mixing of biomass particles.
Collapse
|
9
|
Advances in 2D MXenes-based materials for water purification and disinfection: Synthesis approaches and photocatalytic mechanistic pathways. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 324:116387. [PMID: 36352727 DOI: 10.1016/j.jenvman.2022.116387] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/08/2022] [Revised: 09/22/2022] [Accepted: 09/26/2022] [Indexed: 06/16/2023]
Abstract
MXenes two-dimensional materials have recently excited researchers' curiosity for various industrial applications. MXenes are promising materials for environmental remediation technologies to sense and mitigate various intractable hazardous pollutants from the atmosphere due to their inherent mechanical and physicochemical properties, such as high surface area, increased hydrophilicity, high conductivity, changing band gaps, and robust electrochemistry. This review discusses the versatile applications of MXenes and MXene-based nanocomposites in various environmental remediation processes. A brief description of synthetic procedures of MXenes nanocomposites and their different properties are highlighted. Afterward, the photocatalytic abilities of MXene-based nanocomposites for degrading organic pollutants, removal of heavy metals, and inactivation of microorganisms are discussed. In addition, the role of MXenes anti-corrosion support in the lifetime of some semiconductors was addressed. Current challenges and future perspectives toward the application of MXene materials for environmental remediation and energy production are summarized for plausible real-world use.
Collapse
|
10
|
Modeling the adsorption of divalent metallic cations onto multi-walled carbon nanotubes functionalized with COOH. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.120275] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
11
|
Dynamics of VOCs degradation and bacterial inactivation at the interface of AgxO/Ag/TiO2 prepared by HiPIMS under indoor light. J Photochem Photobiol A Chem 2022. [DOI: 10.1016/j.jphotochem.2022.114321] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
12
|
Correction to: Recent progress and challenges on the removal of perand poly-fluoroalkyl substances (PFAS) from contaminated soil and water. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:58429. [PMID: 35781668 DOI: 10.1007/s11356-022-21788-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
|
13
|
Recent progress and challenges on the removal of per- and poly-fluoroalkyl substances (PFAS) from contaminated soil and water. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:58405-58428. [PMID: 35754080 DOI: 10.1007/s11356-022-21513-2] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2022] [Accepted: 06/12/2022] [Indexed: 06/15/2023]
Abstract
Currently, due to an increase in urbanization and industrialization around the world, a large volume of per- and poly-fluoroalkyl substances (PFAS) containing materials such as aqueous film-forming foam (AFFF), protective coatings, landfill leachates, and wastewater are produced. Most of the polluted wastewaters are left untreated and discharged into the environment, which causes high environmental risks, a threat to human beings, and hampered socioeconomic growth. Developing sustainable alternatives for removing PFAS from contaminated soil and water has attracted more attention from policymakers and scientists worldwide under various conditions. This paper reviews the recent emerging technologies for the degradation or sorption of PFAS to treat contaminated soil and water. It highlights the mechanisms involved in removing these persistent contaminants at a molecular level. Recent advances in developing nanostructured and advanced reduction remediation materials, challenges, and perspectives in the future are also discussed. Among the variety of nanomaterials, modified nano-sized iron oxides are the best sorbents materials due to their specific surface area and photogenerated holes and appear extremely promising in the remediation of PFAS from contaminated soil and water.
Collapse
|
14
|
Structural and optical properties of Mn2+-doped ZnCdS/ZnS core/shell quantum dots: New insights in Mn2+ localization for higher luminescence sensing. J Photochem Photobiol A Chem 2022. [DOI: 10.1016/j.jphotochem.2022.113946] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
15
|
Editorial overview: Nanomaterials for energy and environmental applications: advances and recent trends. Curr Opin Chem Eng 2022. [DOI: 10.1016/j.coche.2022.100805] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
16
|
Preparation and applications of chitosan and cellulose composite materials. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 301:113850. [PMID: 34619590 DOI: 10.1016/j.jenvman.2021.113850] [Citation(s) in RCA: 43] [Impact Index Per Article: 21.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2021] [Revised: 09/22/2021] [Accepted: 09/24/2021] [Indexed: 05/28/2023]
Abstract
Chitosan is a natural fiber, chemically cellulose-like biopolymer, which is processed from chitin. Its use as a natural polymer is getting more attention because it is non-toxic, renewable, and biocompatible. However, its poor mechanical and thermal strength, particle size, and surface area restrict its industrial use. Consequently, to improve these properties, cellulose and/or inorganic nanoparticles have been used. This review discusses the recent progress of chitosan and cellulose composite materials, their preparation, and their applications in different industrial sectors. It also discusses the modification of chitosan and cellulose composite materials to allow their use on a large scale. Finally, the recent development of chitosan composite materials for drug delivery, food packaging, protective coatings, and wastewater treatment are discussed. The challenges and perspectives for future research are also considered. This review suggests that chitosan and cellulose nano-composite are promising, low-cost products for environmental remediation involving a simple production process.
Collapse
|
17
|
Photo-induced environmental remediation, biomedical imaging, and microbial inactivation by Mn-doped semiconductors: critical issues. Curr Opin Chem Eng 2021. [DOI: 10.1016/j.coche.2021.100731] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
18
|
Coupling electrocoagulation and solar photocatalysis for electro- and photo-catalytic removal of carmoisine by Ag/graphitic carbon nitride: Optimization by process modeling and kinetic studies. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2021.116917] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
19
|
Accelerating the Design of Photocatalytic Surfaces for Antimicrobial Application: Machine Learning Based on a Sparse Dataset. Catalysts 2021. [DOI: https://doi.org/10.3390/catal11081001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022] Open
Abstract
Nowadays, most experiments to synthesize and test photocatalytic antimicrobial materials are based on trial and error. More often than not, the mechanism of action of the antimicrobial activity is unknown for a large spectrum of microorganisms. Here, we propose a scheme to speed up the design and optimization of photocatalytic antimicrobial surfaces tailored to give a balanced production of reactive oxygen species (ROS) upon illumination. Using an experiment-to-machine-learning scheme applied to a limited experimental dataset, we built a model that can predict the photocatalytic activity of materials for antimicrobial applications over a wide range of material compositions. This machine-learning-assisted strategy offers the opportunity to reduce the cost, labor, time, and precursors consumed during experiments that are based on trial and error. Our strategy may significantly accelerate the large-scale deployment of photocatalysts as a promising route to mitigate fomite transmission of pathogens (bacteria, viruses, fungi) in hospital settings and public places.
Collapse
|
20
|
Emerging technologies for biofuel production: A critical review on recent progress, challenges and perspectives. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 290:112627. [PMID: 33991767 DOI: 10.1016/j.jenvman.2021.112627] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2021] [Revised: 04/10/2021] [Accepted: 04/11/2021] [Indexed: 05/08/2023]
Abstract
Due to increasing anthropogenic activities, especially industry and transport, the fossil fuel demand and consumption have increased proportionally, causing serious environmental issues. This attracted researchers and scientists to develop new alternative energy sources. Therefore, this review covers the biofuel production potential and challenges related to various feedstocks and advances in process technologies. It has been concluded that the biofuels such as biodiesel, ethanol, bio-oil, syngas, Fischer-Tropsch H2, and methane produced from crop plant residues, micro- and macroalgae and other biomass wastes using thermo-bio-chemical processes are an eco-friendly route for an energy source. Biofuels production and their uses in industries and transportation considerably minimize fossil fuel dependence. Literature analysis showed that biofuels generated from energy crops and microalgae could be the most efficient and attractive process. Recent progress in the field of biofuels using genetic engineering has larger perspectives in commercial-scale production. However, its large-scale production is still challenging; hence, to resolve this problem, it is essential to convert biomass in biofuels by developing novel technology to increase biofuel production to fulfil the current and future energy demand.
Collapse
|
21
|
Combining photocatalytic process and biological treatment for Reactive Green 12 degradation: optimization, mineralization, and phytotoxicity with seed germination. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021; 28:12490-12499. [PMID: 33083957 DOI: 10.1007/s11356-020-11282-1] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/25/2020] [Accepted: 10/15/2020] [Indexed: 06/11/2023]
Abstract
In this study, we show that the combination of a photocatalytic process (as a pretreatment step) combined with the conventional biological treatment of wastewaters can improve the process and achieve satisfactory efficiency. In this context, Reactive Green 12 (RG-12) solutions were photocatalytically pretreated using TiO2-impregnated polyester as supported catalyst under UV light in batch reactor. Photocatalysis as pretreatment (during 4 and 8 h of irradiation) was combined with 7 days of aerobic biological treatment using activated sludge. As first assays, respiratory tests revealed that the removal of RG-12 was improved by 5.4% and 11.7% for the solutions that were irradiated for 4 and 8 h in the presence of TiO2, respectively. However, 34.5% and 19% of dye solution was discolored after 7 days of biological treatment for the pretreated solutions during 4 and 8 h of UV light exposure, respectively. The discoloration efficiency obtained by the combined processes achieved 59.6% and 74.9% for the samples under photocatalysis during 4 and 8 h, respectively. A significant decrease in chemical oxygen demand (COD) of about 74.9% was achieved after photocatalysis/biodegradation processes. In addition, a decrease in the phytotoxicity was obtained as followed by the germination index (GI) values of cress seeds that increased from 46.2 to 88.7% after 8 h of photocatalysis and then to 92.8% after further 7 days of biological treatment.
Collapse
|
22
|
Investigation and modeling of odors release from membrane holes on daily overlay in a landfill and its impact on landfill odor control. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021; 28:4443-4451. [PMID: 32944861 PMCID: PMC7835168 DOI: 10.1007/s11356-020-10793-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/26/2020] [Accepted: 09/09/2020] [Indexed: 06/11/2023]
Abstract
In the present work, we studied the NH3 and H2S odor fluxes between the exposed working area and the HDPE covering film holes of the daily overlay in an actual landfill site with a daily operating area of 1600 m2 in Hangzhou, China. We showed that the odors were released from the membrane pores and the average concentrations of NH3 and H2S release reached 109.6 ± 56.6 and 86.0 ± 31.1 mg/m2/s, respectively. These concentrations are 43.8 and 57.3 times the exposed working surface. Furthermore, mathematical modeling based on the total amount of odor release revealed that there was a linear positive correlation between the total odor amount and the landfill operation area. However, the maximum number of film holes allowed on the covering layer has nothing to do with the working area and exposed working time, which is mainly determined by the HDPE film width in terms of ensuring the deodorizing effect of the covering operation. If the HDPE film with a width of more than 4 m is used, the number of film holes allowed within 100 m is more than 8. Therefore, in order to reduce the odor, the appropriate film width should be selected according to the actual operating conditions such as the mechanical operation level at the time of welding, the design of the landfill site, and the operational norms. This study explores the effect of film hole quantity of the daily cover in the landfill on the odor release from the landfill, which can provide an important reference for the design, operation, and decision-making of the daily cover operation of the sanitary landfill.
Collapse
|
23
|
Emerging technologies for the recovery of rare earth elements (REEs) from the end-of-life electronic wastes: a review on progress, challenges, and perspectives. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:36052-36074. [PMID: 32617815 DOI: 10.1007/s11356-020-09630-2] [Citation(s) in RCA: 36] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/22/2020] [Accepted: 06/05/2020] [Indexed: 06/11/2023]
Abstract
The demand for rare earth elements (REEs) has significantly increased due to their indispensable uses in integrated circuits of modern technology. However, due to the extensive use of high-tech applications in our daily life and the depletion of their primary ores, REE's recovery from secondary sources is today needed. REEs have now attracted attention to policymakers and scientists to develop novel recovery technologies for materials' supply sustainability. This paper summarizes the recent progress for the recovery of REEs using various emerging technologies such as bioleaching, biosorption, cryo-milling, electrochemical processes and nanomaterials, siderophores, hydrometallurgy, pyrometallurgy, and supercritical CO2. The challenges facing this recovery are discussed comprehensively and some possible improvements are presented. This work also highlights the economic and engineering aspects of the recovery of REE from waste electrical and electronic equipment (WEEE). Finally, this review suggests that greener and low chemical consuming technologies, such as siderophores and electrochemical processes, are promising for the recovery of REEs present in small quantities. These technologies present also a potential for large-scale application.
Collapse
|
24
|
Biological responses at the interface of Ti-doped diamond-like carbon surfaces for indoor environment application. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:31120-31129. [PMID: 32474782 DOI: 10.1007/s11356-020-09376-x] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/22/2020] [Accepted: 05/19/2020] [Indexed: 06/11/2023]
Abstract
Diamond-like carbon (DLC) and titanium-doped DLC coatings were prepared by hybrid PECVD/direct current magnetron sputtering (DCMS). In this study, we show that the operating conditions of titanium-doped DLC coatings used for implants in surgical devices significantly modify their surface properties and consequently their interaction with cells. The coatings showed uniform distribution on the substrate and their biocompatibility was tested by way of rat calvaria osteoblasts. Doping DLC with Ti changed the roughness and wettability of the film interface. The autoclaving of the samples led to the surface oxidation and the formation of TiO2 on the top-most layers of Ti-doped DLC. This was quantitatively assessed by X-ray photoelectron spectroscopy (XPS) and revealed the presence of Ti3+ and Ti4+ species in redox reactions during their interactions with cells. By XPS analysis, the oxidative carbonaceous species C=O and O=C-C were detected during the bacterial inactivation. Reactive oxygen species (ROS) were identified on the sputtered samples and the ⦁OH radical was identified as the most important oxidative radical intermediate leading to bacterial disinfection. The position of the intra-gap of the oxidized C species is suggested within the TiO2 bandgap.
Collapse
|
25
|
New Evidence for Ag-Sputtered Materials Inactivating Bacteria by Surface Contact without the Release of Ag Ions: End of a Long Controversy? ACS APPLIED MATERIALS & INTERFACES 2020; 12:4998-5007. [PMID: 31895531 DOI: 10.1021/acsami.9b15859] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The study provides new evidence for Ag-coated polyester (PES) mediating Escherichia coli inactivation by way of genetically engineered E. coli (without porins, from now denoted porinless bacteria). This allows the quantification of the bactericidal kinetics induced by the Ag surface without the intervention of Ag ions. Bacterial inactivation mediated by Ag-PES was seen to be completed within 60 min. The samples were prepared by high-power impulse magnetron sputtering (HiPIMS) at different sputter powers. In anaerobic media, this process required 120 min. The amounts of ions (Ar+, Ag+, and Ag2+) generated during the deposition by direct current magnetron sputtering (DCMS) and HiPIMS were determined by mass spectrometry. The thickness of the Ag films sputtered on PES by DCMS (0.28 A) during 100 s was found to be 340 nm. Thicknesses of 250, 230, and 200 nm were found when sputtering with HiPIMS was tuned at 8, 17, and 30 A, respectively. By scanning transmission electron microscopy (STEM-HAADF), the atomic distribution of Ag and oxygen was detected. By X-ray photoelectron spectroscopy (XPS), a shift in the Ag oxidation state was observed within the bacterial inactivation period. This reveals redox catalysis within the time required for the total bacterial inactivation due to the interaction between the bacterial suspension and Ag-PES. Surface properties of the Ag-coated PES samples were additionally investigated by X-ray diffraction (XRD). The formation of Ag plasmon was detected by diffuse reflectance spectroscopy (DRS) and was a function of the applied sputtering energy. The indoor sunlight irradiation dose required to induce an accelerated bacterial inactivation was found to be 5-10 mW/cm2.
Collapse
|
26
|
Recent advances on sputtered films with Cu in ppm concentrations leading to an acceleration of the bacterial inactivation. Catal Today 2020. [DOI: 10.1016/j.cattod.2018.06.016] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
27
|
Deciphering the Mechanisms of Bacterial Inactivation on HiPIMS Sputtered Cu xO-FeO x-PET Surfaces: From Light Absorption to Catalytic Bacterial Death. ACS APPLIED MATERIALS & INTERFACES 2019; 11:45319-45329. [PMID: 31696713 DOI: 10.1021/acsami.9b17380] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The production of nontoxic, affordable, and efficient antibacterial surfaces is key to the well-being of our societies. In this aim, antibacterial thin films have been prepared using earth-abundant metals deposited using high-power impulse magnetron sputtering (HiPIMS). The sputtered FeOx, CuxO, and mixed CuxO-FeOx films exhibited fast bacterial inactivation properties under exposure to indoor light (340-720 nm) showing total bacterial inactivation within 180, 120, and 60 min, respectively. The photocatalytic mechanisms of these films were investigated, from the absorption of photons up to the bacteria's fate, by means of ultrafast transient spectroscopy, flow cytometry, and malondialdehyde (MDA) quantification justifying the cell wall disruption. The primary driving force leading to bacterial inactivation was found to be the oxidative stress at the interface between the sputtered thin films and the microorganism. This was justified by using engineered porinless bacteria disabling the possible ion diffusion leading to internal bacterial inactivation. Such stress is a direct consequence of the photogenerated electron-hole pairs at the interface of the sputtered layers. By diffuse reflectance spectroscopy, we found that both FeOx and CuxO present a band gap of ∼2.9 eV (>425 nm), while the mixed CuxO-FeOx thin film has a band gap below 2.3 eV (>540 nm). The structure and atomic composition of the films were characterized by energy-dispersive X-ray, X-ray photoelectron, and optical spectroscopy. While the composition and metal oxidation states are distinct in all three films, the difference in photocatalytic efficiency can, at first sight, be explained as the direct consequence of their absorbance and the unique interaction between Fe and Cu oxides in the composite film.
Collapse
|
28
|
Flower-like magnetized photocatalysts accelerating an emerging pollutant removal under indoor visible light and related phenomena. J Photochem Photobiol A Chem 2019. [DOI: 10.1016/j.jphotochem.2019.04.017] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
29
|
Evidence for a dual mechanism in the TiO2/CuxO photocatalyst during the degradation of sulfamethazine under solar or visible light: Critical issues. J Photochem Photobiol A Chem 2019. [DOI: 10.1016/j.jphotochem.2019.02.033] [Citation(s) in RCA: 35] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
30
|
Photocatalytic degradation of binary and ternary mixtures of antibiotics: reactive species investigation in pilot scale. Chem Eng Res Des 2019. [DOI: 10.1016/j.cherd.2019.02.015] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
31
|
Femtosecond Spectroscopy of Au Hot-Electron Injection into TiO₂: Evidence for Au/TiO₂ Plasmon Photocatalysis by Bactericidal Au Ions and Related Phenomena. NANOMATERIALS 2019; 9:nano9020217. [PMID: 30736360 PMCID: PMC6410102 DOI: 10.3390/nano9020217] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/03/2019] [Revised: 01/31/2019] [Accepted: 02/01/2019] [Indexed: 01/16/2023]
Abstract
In the present work, we provide evidence for visible light irradiation of the Au/TiO2 nanoparticles’ surface plasmon resonance band (SPR) leading to electron injection from the Au nanoparticles to the conduction band of TiO2. The Au/TiO2 SPR band is shown to greatly enhance the light absorption of TiO2 in the visible region. Evidence is presented for the light absorption by the Au/TiO2 plasmon bands leading to the dissolution of Au nanoparticles. This dissolution occurs concomitantly with the injection of the hot electrons generated by the Au plasmon into the conduction band of TiO2. The electron injection from the Au nanoparticles into TiO2 was followed by femtosecond spectroscopy. The formation of Au ions was further confirmed by the spectral shift of the transient absorption spectra of Au/TiO2. The spectral changes of the SPR band of Au/TiO2 nanoparticles induced by visible light were detected by spectrophotometer, and the morphological transformation of Au/TiO2 was revealed by electron microscopy techniques as well. Subsequently, the fate of the Au ions was sorted out during the growth and biofilm formation for some selected Gram-negative bacteria. This study compares the bactericidal mechanism of Au ions and Ag ions, which were found to be substantially different depending on the selected cell used as a probe.
Collapse
|
32
|
Synthesis and characterization of fluorinated anatase nanoparticles and subsequent N-doping for efficient visible light activated photocatalysis. Colloids Surf B Biointerfaces 2018; 171:445-450. [DOI: 10.1016/j.colsurfb.2018.07.035] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2018] [Revised: 06/22/2018] [Accepted: 07/16/2018] [Indexed: 10/28/2022]
|
33
|
Bacterial adhesion and inactivation on Ag decorated TiO2-nanotubes under visible light: Effect of the nanotubes geometry on the photocatalytic activity. Colloids Surf B Biointerfaces 2018; 170:92-98. [DOI: 10.1016/j.colsurfb.2018.06.005] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2018] [Revised: 06/02/2018] [Accepted: 06/04/2018] [Indexed: 10/14/2022]
|
34
|
Reactive species monitoring and their contribution for removal of textile effluent with photocatalysis under UV and visible lights: Dynamics and mechanism. J Photochem Photobiol A Chem 2018. [DOI: 10.1016/j.jphotochem.2018.07.031] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
35
|
Evidence for differentiated ionic and surface contact effects driving bacterial inactivation by way of genetically modified bacteria. Chem Commun (Camb) 2018; 53:9093-9096. [PMID: 28758649 DOI: 10.1039/c7cc05013e] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
New evidence is presented for the bacterial inactivation of E. coli presenting normal porins on sputtered Ag-Cu surfaces compared with similar E. coli porinless bacteria. Inactivation at a reduced rate was observed on the genetically modified porinless bacteria interacting via surface contact with metal/oxides without the intervention of metal-ions.
Collapse
|
36
|
Solar light and the photo-Fenton process against antibiotic resistant bacteria in wastewater: A kinetic study with a Streptomycin-resistant strain. Catal Today 2018. [DOI: 10.1016/j.cattod.2017.10.033] [Citation(s) in RCA: 35] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
37
|
Discoloration of simulated textile effluent in continuous photoreactor using immobilized titanium dioxide: Effect of zinc and sodium chloride. J Photochem Photobiol A Chem 2018. [DOI: 10.1016/j.jphotochem.2018.01.032] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
|
38
|
Innovative Ti 1- xNb xN-Ag Films Inducing Bacterial Disinfection by Visible Light/Thermal Treatment. ACS APPLIED MATERIALS & INTERFACES 2018; 10:12021-12030. [PMID: 29601181 DOI: 10.1021/acsami.7b19225] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
This study presents innovative Ti1- xNb xN-Ag films obtained by a suitable combination of low-energy and high-energy sputtering leading to bacterial inactivation. The bacterial inactivation kinetics by the TiNbN layers was drastically enhanced by the addition of 6-7% Ag and proceeded to completion within 3 h after the film autoclaving. By X-ray photoelectron spectroscopy (XPS), the samples after autoclaving presented in their upper layers TiO2, Nb2O5 and Ag2O with a surface composition of Ti0.81Nb0.19N0.99Ag0.068. Surface potential/pH changes in the Ti1- xNb xN-Ag films were monitored during bacterial inactivation. Surface redox processes during the bacterial inactivation were detected by XPS. The diffusion of Ag in the Ti1- xNb xN-Ag films was followed at 50 and 70 °C pointing. The beneficial thermal treatment points out to the bifunctional bacterial inactivation properties of these films and their potential application in healthcare facilities. Interfacial charge transfer (IFCT) under light irradiation between Ag2O, Nb2O5 and TiO2 is suggested consistent with the data found during the course of this study. The TiO2/Nb2O5 lattice mechanism is discussed in the framework of the Verwey's controlled valence model. The surface properties of the Ti1- xNb xN-Ag films were investigated by X-ray diffraction, atomic force microscopy, and scanning electron microscopy.
Collapse
|
39
|
Synergistic Effect of Fluorinated and N Doped TiO₂ Nanoparticles Leading to Different Microstructure and Enhanced Photocatalytic Bacterial Inactivation. NANOMATERIALS 2017; 7:nano7110391. [PMID: 29140308 PMCID: PMC5707608 DOI: 10.3390/nano7110391] [Citation(s) in RCA: 36] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/09/2017] [Revised: 11/09/2017] [Accepted: 11/10/2017] [Indexed: 11/10/2022]
Abstract
This work focuses on the development of a facile and scalable wet milling method followed by heat treatment to prepare fluorinated and/or N-doped TiO2 nanopowders with improved photocatalytic properties under visible light. The structural and electronic properties of doped particles were investigated by various techniques. The successful doping of TiO2 was confirmed by X-ray photoelectron spectroscopy (XPS), and the atoms appeared to be mainly located in interstitial positions for N whereas the fluorination is located at the TiO2 surface. The formation of intragap states was found to be responsible for the band gap narrowing leading to the faster bacterial inactivation dynamics observed for the fluorinated and N doped TiO2 particles compared to N-doped TiO2. This was attributed to a synergistic effect. The results presented in this study confirmed the suitability of the preparation approach for the large-scale production of cost-efficient doped TiO2 for effective bacterial inactivation.
Collapse
|
40
|
Iron oxide-mediated semiconductor photocatalysis vs. heterogeneous photo-Fenton treatment of viruses in wastewater. Impact of the oxide particle size. JOURNAL OF HAZARDOUS MATERIALS 2017; 339:223-231. [PMID: 28662403 DOI: 10.1016/j.jhazmat.2017.06.037] [Citation(s) in RCA: 37] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/29/2017] [Revised: 06/16/2017] [Accepted: 06/17/2017] [Indexed: 05/24/2023]
Abstract
The photo-Fenton process is recognized as a promising technique towards microorganism disinfection in wastewater, but its efficiency is hampered at near-neutral pH operating values. In this work, we overcome these obstacles by using the heterogeneous photo-Fenton process as the default disinfecting technique, targeting MS2 coliphage in wastewater. The use of low concentrations of iron oxides in wastewater without H2O2 (wüstite, maghemite, magnetite) has demonstrated limited semiconductor-mediated MS2 inactivation. Changing the operational pH and the size of the oxide particles indicated that the isoelectric point of the iron oxides and the active surface area are crucial in the success of the process, and the possible underlying mechanisms are investigated. Furthermore, the addition of low amounts of Fe-oxides (1mgL-1) and H2O2 in the system (1, 5 and 10mgL-1) greatly enhanced the inactivation process, leading to heterogeneous photo-Fenton processes on the surface of the magnetically separable oxides used. Additionally, photo-dissolution of iron in the bulk, lead to homogeneous photo-Fenton, further aided by the complexation by the dissolved organic matter in the solution. Finally, we assess the impact of the presence of the bacterial host and the difference caused by the different iron sources (salts, oxides) and the Fe-oxide size (normal, nano-sized).
Collapse
|
41
|
Assessment of the correlation among antibiotic resistance, adherence to abiotic and biotic surfaces, invasion and cytotoxicity of Pseudomonas aeruginosa isolated from diseased gilthead sea bream. Colloids Surf B Biointerfaces 2017; 158:229-236. [PMID: 28697438 DOI: 10.1016/j.colsurfb.2017.06.044] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2017] [Revised: 05/28/2017] [Accepted: 06/26/2017] [Indexed: 11/27/2022]
Abstract
Improper uses of antibiotics to treat fish disease pose an increase of multidrug resistance in Pseudomonas aeruginosa. In order to escape host antimicrobial agents and induce cytotoxicity, different virulence properties are needed by these bacteria such as, biofilm formation, adhesion and invasion ability. This study was conducted to isolate Pseudomonas aeruginosa from diseased cultured gilthead sea bream. Seventeen isolates of Pseudomonas aeruginosa were identified by PCR. All of the isolates tested were susceptible to Gentamicin and Ciprofloxacin. Highest level of resistance was observed against Erythromycin, Ampicillin and Tetracycline. Among the 17 isolates, 11 showed multi-drug resistance. The isolates were screened for biofilm formation in abiotic surfaces, adherence, invasion and cytotoxicity against Hep-2 cells. We found that some strains were able to adhere to abiotic and biotic surface and to enter inside Hep-2 cells. Using cytochalasin D inhibitor, we observed a significant decrease in invasion of epithelial cells. The 17 washed bacterial cells induce variable degree of cytotoxicity. However, no cytotoxic effects on Hep-2 cells were obtained among the totality of cell free filtrate of Pseudomonas strains. By studying the relationship between different virulence properties, a significant positive correlation was obtained between both biofilm formation and adherence, and between adherence and invasion to epithelial cells. Subsequently, we found that the mean values of adhesion and invasion in the MDR group were significantly higher than those observed in the non-MDR group. Likewise, a significant positive correlation was found among adhesive and invasive capacities of Pseudomonas strains and their antibiotic resistance phenotypes.
Collapse
|
42
|
Self-Sterilizing Sputtered Films for Applications in Hospital Facilities. Molecules 2017; 22:E1074. [PMID: 28657579 PMCID: PMC6152303 DOI: 10.3390/molecules22071074] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2017] [Accepted: 05/23/2017] [Indexed: 12/02/2022] Open
Abstract
This review addresses the preparation of antibacterial 2D textile and thin polymer films and 3D surfaces like catheters for applications in hospital and health care facilities. The sputtering of films applying different levels of energy led to the deposition of metal/oxide/composite/films showing differentiated antibacterial kinetics and surface microstructure. The optimization of the film composition in regards to the antibacterial active component was carried out in each case to attain the fastest antibacterial kinetics, since this is essential when designing films avoiding biofilm formation (under light and in the dark). The antimicrobial performance of these sputtered films on Staphylococcus aureus (MRSA) and Escherichia coli (E. coli) were tested. A protecting effect of TiO₂ was found for the release of Cu by the TiO₂-Cu films compared to films sputtered by Cu only. The Cu-released during bacterial inactivation by TiO₂-Cu was observed to be much lower compared to the films sputtered only by Cu. The FeOx-TiO₂-PE films induced E. coli inactivation under solar or under visible light with a similar inactivation kinetics, confirming the predominant role of FeOx in these composite films. By up-to-date surface science techniques were used to characterize the surface properties of the sputtered films. A mechanism of bacteria inactivation is suggested for each particular film consistent with the experimental results found and compared with the literature.
Collapse
|
43
|
Light-Assisted Advanced Oxidation Processes for the Elimination of Chemical and Microbiological Pollution of Wastewaters in Developed and Developing Countries. Molecules 2017; 22:molecules22071070. [PMID: 28672875 PMCID: PMC6152201 DOI: 10.3390/molecules22071070] [Citation(s) in RCA: 75] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2017] [Revised: 06/22/2017] [Accepted: 06/23/2017] [Indexed: 01/11/2023] Open
Abstract
In this work, the issue of hospital and urban wastewater treatment is studied in two different contexts, in Switzerland and in developing countries (Ivory Coast and Colombia). For this purpose, the treatment of municipal wastewater effluents is studied, simulating the developed countries’ context, while cheap and sustainable solutions are proposed for the developing countries, to form a barrier between effluents and receiving water bodies. In order to propose proper methods for each case, the characteristics of the matrices and the targets are described here in detail. In both contexts, the use of Advanced Oxidation Processes (AOPs) is implemented, focusing on UV-based and solar-supported ones, in the respective target areas. A list of emerging contaminants and bacteria are firstly studied to provide operational and engineering details on their removal by AOPs. Fundamental mechanistic insights are also provided on the degradation of the effluent wastewater organic matter. The use of viruses and yeasts as potential model pathogens is also accounted for, treated by the photo-Fenton process. In addition, two pharmaceutically active compound (PhAC) models of hospital and/or industrial origin are studied in wastewater and urine, treated by all accounted AOPs, as a proposed method to effectively control concentrated point-source pollution from hospital wastewaters. Their elimination was modeled and the degradation pathway was elucidated by the use of state-of-the-art analytical techniques. In conclusion, the use of light-supported AOPs was proven to be effective in degrading the respective target and further insights were provided by each application, which could facilitate their divulgation and potential application in the field.
Collapse
|
44
|
Innovative and stable TiO 2 supported catalytic surfaces removing aldehydes under UV-light irradiation. J Photochem Photobiol A Chem 2017. [DOI: 10.1016/j.jphotochem.2017.04.029] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
45
|
|
46
|
Sputtered Gum metal thin films showing bacterial inactivation and biocompatibility. Colloids Surf B Biointerfaces 2016; 146:687-91. [DOI: 10.1016/j.colsurfb.2016.07.007] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2016] [Revised: 07/01/2016] [Accepted: 07/03/2016] [Indexed: 10/21/2022]
|
47
|
A New Perspective in the Use of FeOx-TiO2 Photocatalytic Films: Indole Degradation in the Absence of Fe-Leaching. J Catal 2016. [DOI: 10.1016/j.jcat.2016.07.012] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
48
|
Quasi-Instantaneous Bacterial Inactivation on Cu-Ag Nanoparticulate 3D Catheters in the Dark and Under Light: Mechanism and Dynamics. ACS APPLIED MATERIALS & INTERFACES 2016; 8:47-55. [PMID: 26699928 DOI: 10.1021/acsami.5b09730] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
The first evidence for Cu-Ag (50%/50%) nanoparticulate hybrid coatings is presented leading to a complete and almost instantaneous bacterial inactivation in the dark (≤5 min). Dark bacterial inactivation times on Cu-Ag (50%/50%) were observed to coincide with the times required by actinic light irradiation. This provides the evidence that the bimetal Cu-Ag driven inactivation predominates over a CuO/Cu2O and Ag2O oxides inducing a semiconductor driven behavior. Cu- or Ag-coated polyurethane (PU) catheters led to bacterial inactivation needing about ∼30 min. The accelerated bacterial inactivation by Cu-Ag coated on 3D catheters sputtered was investigated in a detailed way. The release of Cu/Ag ions during bacterial inactivation was followed by inductively coupled plasma mass-spectrometry (ICP-MS) and the amount of Cu and Ag-ions released were below the cytotoxicity levels permitted by the sanitary regulations. By stereomicroscopy the amount of live/dead cells were followed during the bacterial inactivation time. By Fourier transform infrared spectroscopy (FTIR), the systematic shift of the -(CH2) band stretching of the outer lipo-polysaccharide bilayer (LPS) was followed to monitor the changes leading to cell lysis. A hydrophobic to hydrophilic transformation of the Cu-Ag PU catheter surface under light was observed within 30 min followed concomitantly to a longer back transformation to the hydrophobic initial state in the dark. Physical insight is provided for the superior performance of Cu-Ag films compared to Cu or Ag films in view of the drastic acceleration of the bacterial inactivation observed on bimetal Cu-Ag films coating PU catheters. A mechanism of bacterial inactivation is suggested that is consistent with the findings reported in this study.
Collapse
|
49
|
Microstructure of Cu-Ag Uniform Nanoparticulate Films on Polyurethane 3D Catheters: Surface Properties. ACS APPLIED MATERIALS & INTERFACES 2016; 8:56-63. [PMID: 26700113 DOI: 10.1021/acsami.5b09738] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The preparation, characterization, and antibacterial testing of Cu-Ag sputtered polyurethane (PU) catheters are addressed in this study. PU catheters with different atomic ratios Cu:Ag have been sputtered and led to different optical properties as followed by diffuse reflectance spectroscopy (DRS) and the surface redox properties were also different for different Cu-Ag ratios as observed by X-ray photoelectron spectroscopy (XPS). The surface atomic percentage concentration of the oxidized/reduced C-species originating from bacterial cultures before and after bacterial inactivation were determined on the Cu-Ag PU catheters. The crystallographic properties were determined by X-ray diffraction (XRD). The XRD-diffractogram showed the presence of Cu2O (111), Cu (200), CuO (020), and Ag (111) indicating that Cu nanoparticles present a more crystalline character compared to Ag nanoparticles. Increasing the percentage of Ag in the Cu-Ag films, bigger Ag-particle agglomerates were detected by scanning transmission electron microscopy (STEM) microanalysis confirming the results obtained by AFM. The bacterial inactivation kinetics of the sputtered Cu-Ag films on PU catheters was investigated in detail. Quasi-instantaneous bacterial inactivation kinetics was induced by the sputtered films on PU catheters after optimization of the Cu-Ag film thickness.
Collapse
|
50
|
Innovative self-sterilizing transparent Fe–phosphate polyethylene films under visible light. RSC Adv 2016. [DOI: 10.1039/c6ra15881a] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
An account of stable, uniform and adhesive high-density polyethylene terephthalate Fe–phosphate (FeOx–POx–HDPET) sputtered thin films showing absorption in the visible region up to 700 nm compared to POx presenting absorption below 300 nm.
Collapse
|