Employing Piper longum extract for eco-friendly fabrication of PtPd alloy nanoclusters: advancing electrolytic performance of formic acid and methanol oxidation

Advancement in bioinspired alloy nanomaterials has a crucial impact on fuel cell applications. Here, we report the synthesis of PtPd alloy nanoclusters via the hydrothermal method using Piper longum extract, representing a novel and environmentally friendly approach. Physicochemical characteristics of the synthesized nanoclusters were investigated using various instrumentation techniques, including X-ray photoelectron spectroscopy, X-ray diffraction, and High-Resolution Transmission electron microscopy. The electrocatalytic activity of the biogenic PtPd nanoclusters towards the oxidation of formic acid and methanol was evaluated chronoamperometry and cyclic voltammetry studies. The surface area of the electrocatalyst was determined to be 36.6 m2g-1 by Electrochemical Surface Area (ECSA) analysis. The biologically inspired PtPd alloy nanoclusters exhibited significantly higher electrocatalytic activity compared to commercial Pt/C, with specific current responses of 0.24 mA cm - 2 and 0.17 mA cm - 2 at synthesis temperatures of 180 °C and 200 °C, respectively, representing approximately four times higher oxidation current after 120 min. This innovative synthesis approach offers a promising pathway for the development of PtPd alloy nanoclusters with enhanced electrocatalytic activity, thereby advancing fuel cell technology towards a sustainable energy solution.

Roles of polysaccharides-based nanomaterials in food preservation and extension of shelf-life of food products: A review

In food production sectors, food spoilage and contamination are major issues that threaten and negatively influence food standards and safety. Several physical, chemical, and biological methods are used to extend the shelf-life of food products, but they have their limitations. Henceforth, researchers and scientists resort to novel methods to resolve these existing issues. Nanomaterials-based extension of food shelf life has broad scope rendering a broad spectrum of activity including high antioxidant and antimicrobial activity. Numerous research investigations have been made to identify the possible roles of nanoparticles in food preservation. A wide range of nanomaterials via different approaches is ultimately applied for food preservation. Among them, chemically synthesized methods have several limitations, unlike biological synthesis. However, biological synthesis protocols are quite expensive and laborious. Predominant studies demonstrated that nanoparticles can protect fruits and vegetables by preventing microbial contamination. Though several nanomaterials designated for food preservation are available, detailed knowledge of the mechanism remains unclear. Hence, this review aims to highlight the various nanomaterials and their roles in increasing the shelf life of food products. Adding to the novel market trends, nano-packaging will open new frontiers and prospects for ensuring food safety and quality.

Nitrogen-Fluorine co-doped TiO2/SiO2 nanoparticles for the photocatalytic degradation of acrylonitrile: Deactivation and regeneration

In this study, we investigated the deactivation kinetics and mechanism of N-F-TiO2/SiO2 nanopowder as a model photocatalyst for the purpose of facilitating the photocatalytic degradation of acrylonitrile (AN) in aqueous environment. Prior research has already displayed the proficient degradation of AN through the utilization of N-F-TiO2/SiO2 catalysts, revealing a degradation efficiency of 81.2% within a span of 6 min at an initial AN concentration of 10 mg/L. Multiple variables including the initial AN concentration, illumination intensity, and initial pH value were extensively analyzed during the degradation process. The kinetics of photocatalytic degradation of AN, facilitated by the N-F-TiO2/SiO2 photocatalyst, were modeled by fitting the pseudo first-order reaction kinetics to each individual factor. Furthermore, the adverse effect of catalyst poisoning during the photocatalytic breakdown of AN using the N-F-TiO2/SiO2 photocatalyst was analyzed through a range of different techniques including SEM, XPS, BET, XRD, TG, and NH3-TPD. The incorporation of findings from these diverse techniques revealed that, the primary factors contributing to the photocatalyst's poisoning were as follows: (i) During the degradation process, the build-up of intermediate molecules on active sites hindered their functionality, leading to a decrease in the efficiency of the photocatalytic reaction, (ii) Carbonaceous deposits formed when the catalyst's pore structure was obstructed by pollutants or intermediate products that had not undergone timely photocatalytic breakdown and (iii) The persistent erosion of active sites due to hydraulic forces resulted in inadequate performance of the N-F-TiO2/SiO2 photocatalyst in aqueous solutions. A comprehensive analysis of the deactivation kinetics was conducted, deciding in the formulation of a detailed poisoning mechanism for the N-F-TiO2/SiO2 photocatalyst. Additionally, we explored the catalysts regeneration, involving thermal treatment, ultrasonic irradiation, and catalyst reloading. This study not only advances our insight into the waning performance of catalysts in aqueous media but also establishes a conceptual framework for extrapolating analogous deactivation dynamics in other catalysts, grounded in precedent experimental knowledge. This research contributes to the development of a deactivation model for catalysts in the aqueous environment, based on existing experimental research, providing a theoretical framework for understanding the deactivation process of photocatalysts.

Probing size-dependent defects in zinc oxide using synchrotron techniques: impact on photocatalytic efficiency

In the present study, synchrotron-based X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and X-ray excited optical luminescence (XEOL) have been used to investigate the induced defect states in metal oxide nanomaterials. Specifically, two synthesis approaches have been followed to develop unique nano-sized peanut-shaped (N-ZnO) nanostructures and micron-sized hexagonal rods (M-ZnO). XANES analysis at the Zn K-edge revealed the presence of defect states with a divalent oxidation state of zinc (Zn2+) in a tetrahedral structure. Furthermore, XAS measurements performed at the Zn L3,2-edge and O K-edge confirm higher oxygen-related defects in M-ZnO, while N-ZnO appeared to have a higher concentration of surface defects due to size confinement. Moreover, the in-line XEOL and time dependent-XEOL measurements exposed the radiative excitonic recombination phenomena occurring in the band-tailing region as a function of absorption length, X-ray energy excitation, and time. Based on the chronology developed in the defect state improvement, a possible energy band diagram is proposed to accurately locate the defect states in the two systems. Furthermore, the increased absorption intensity at the Zn L3,2-edge and the O K-edge under the UV lamp suggests delayed recombination of electrons and holes, highlighting their potential use as photo catalysts. The photocatalytic activity degrading the rhodamine B dye established M-ZnO as a superior catalyst with a rapid degradation rate and significant mineralization. Overall, this work provides valuable insights into ZnO defect states and provides a foundation for efficient advanced materials for environmental or other optoelectronic applications.

Synthesis and investigation on synergetic effect of activated carbon loaded silver nanoparticles with enhanced photocatalytic and antibacterial activities

In this study, we synthesized silver nanoparticle-loaded cashew nut shell activated carbon (Ag/CNSAC). The synthesized samples were characterized by XRD, XPS, SEM with EDS, FT-IR, and BET analysis. The XRD, XPS, and EDS data provided convincing proof that Ag loaded on CNSAC is formed. The energy dispersive spectrum analysis and X-ray diffraction pattern both supported the face-centered cubic and amorphous structures of Ag/CNSAC. The SEM micrographs showed the inner surface development of Ag NPs and many tiny pores in CNSAC. The photodegradation of methylene blue (MB) dye by the Ag/CNSAC photocatalyst was investigated. This effective degradation of MB dye by Ag/CNSAC is attributed to the cooperative action of Ag as a photocatalyst and CNSAC as a catalytic support and adsorbent. In tests with gram-positive and negative bacteria including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the as-synthesized Ag/CNSAC showed outstanding antibacterial efficiency. Additionally, this study demonstrates a workable procedure for creating an affordable and efficient Ag/CNSAC for the photocatalytic eradication of organic contaminants.

Biofabrication of carbon quantum dots and their food packaging applications: a review

Carbon quantum dots (CQDs) are an emerging class of novel carbon nanomaterials (< 10 nm). These zero-dimensional CQDs have recently invoked significant interest due to their high fluorescence ability, strong electronic conductivity, biocompatibility, excellent chemical stability, non-toxicity, and environmental safety. Bio-fabrication of CQDs from organic resources remains attractive owing to their excellent functional properties. An emerging class of CQDs is fabricated by various conventional methods. However, these methods need many chemical agents and instrument facilities. Bio-fabrication of CQDs has a lot of benefits because of its simple fabrication and eco-friendly. Therefore, the green synthesized CQDs are considered optimistic candidates for developing novel functional materials for food packaging applications. Thus, it is important to investigate the latest update on green-based CQDs for food packaging applications. This current review paper discusses the physicochemical properties of CQDs, the bio-fabrication of CQDs, and the fluorescent properties of CQDs along with their food packaging applications.

Influence of CoOx surface passivation and Sn/Zr-co-doping on the photocatalytic activity of Fe2O3 nanorod photocatalysts for bacterial inactivation and photo-Fenton degradation

Hydrothermal and wet impregnation methods are presented in this study for synthesizing CoO_x(1 wt%)/Sn-Zr codoped-Fe₂O₃ nanorod photocatalysts for the degradation of organic pollutants and deactivation of bacteria. A hydrothermal route was used to synthesize self-assembled rod-like hierarchical structures of Sn(0-6%) doped Zr-Fe₂O₃ NRs. Additionally, a wet impregnation method was used to load CoO_x onto the surface of photocatalysts (Sn(0-6%)-doped Zr-Fe₂O₃ NRs). A series of 1 wt% CoO_x modified Sn(0-6%)-doped Zr-Fe₂O₃ NRs were synthesized, characterized, and utilized for the photocatalytic decomposition of organic contaminants, along with the killing of E. coli and S. aureus. In comparison with 0, 2, and 6% Sn co-doped Zr-Fe₂O₃ NRs, the CoO_x(1 wt%)/4%Sn/Zr-Fe₂O₃ NRs photocatalyst exhibited an E. coli and S. aureus inactivation efficiencies (90 and 98%). A bio-TEM study of treated and untreated bacterial cells revealed that the CoO_x(1 wt%)/4%Sn/Zr-Fe₂O₃ NRs photocatalyst led to considerable changes in the bacterial cell membranes' morphology. The optimal CoO_x(1 wt%)/Sn(4%) co-doped Zr-Fe₂O₃ NRs photocatalyst achieved degradation efficiencies of 98.5% and 94.6% for BPA and orange II dye. As a result, this work will provide a facile and effective method for developing visible light-active photocatalysts for bacterial inactivation and organic pollutants degradation.

Iron-engineered mesoporous biocarbon composite and its adsorption, activation, and regeneration approach for removal of paracetamol in water

Three-dimensional multi-porous Iron Oxide/carbon (Fe₂O₃/C) composites derived from tamarind shell biomass were synthesized by a single-step co-pyrolysis technique and utilized for Paracetamol (PAC) dismissal in the combined adsorption, and advanced oxidation such as electrochemical regeneration techniques. The Fe₂O₃/C composites were prepared by different pyrolysis temperatures, and named as TS750 (without Fe₂O₃at 750 °C), MTS450 BCs (Low-450 °C), MTS600 BCs (Moderate-600 °C) and MTS750 BCs (high-750 °C), respectively. As-prepared Fe₂O₃/C composite was characterized by FE-SEM, XRD, BET, and XPS analysis. The specific surface area and the spatial interaction between the interlayers of Fe₂O₃ and C were significantly improved by increasing the pyrolysis temperatures from 450 to 750 °C, which improved the adsorption capacity of Fe₂O₃/C composites in terms of higher rate constants and chemisorption kinetics. The Pseudo-second-order kinetics model fitted in the adsorption test results of Fe₂O₃/C composites with the highest correlation co-efficiency. The Langmuir-isotherms model fitted in the adsorption test of the TS750 and MTS450 BCs. The Freundlich isotherms model is more fit with MTS600 and MTS750 BCs. Based on the isotherm results, the MTS750 BCs achieved 46.9 mg/g of maximum PAC adsorption capacity. The optimized MTS750 composites could be completely recovered by using an advanced electrochemical oxidation regeneration approach within 180 min. Also, with the adsorption and recovery process, the TOC removal rate improved to ∼79.4%. After the 6th cycle electrochemical oxidation process, the obtained results of the re-adsorption test showed the stabile adsorption activity of the sorbent material. The data outcomes herein propose that this type of combined adsorption and electrochemical approach will be useful in commercial water treatment plants.

Development of silver oxide-loaded reduced graphene oxide nanohybrids for enhanced photocatalytic activity under visible light in aqueous solutions

We report on the synthesis of silver oxide/reduced graphene oxide nanocomposites (Ag/rGO NCs) using a hydrothermal technique. This paper presents a simple method for synthesizing Ag/rGO hybrid nanocomposites, which can be used for environmentally treating hazardous organic pollutants. The photocatalytic degradation of model artificial Rhodamine B dye and bisphenol A was assessed under visible light illumination. The crystallinity, binding energy, and surface morphologies of the synthesized samples were determined. The silver oxide loading sample resulted in a decrease in the rGO crystallite size. SEM and TEM images demonstrate strong adhesion of the Ag NPs to the rGO sheets. XPS analysis validated the binding energy and elemental composition of the Ag/rGO hybrid nanocomposites. The objective of the experiment was to enhance the photocatalytic efficiency of rGO in the visible region using Ag nanoparticles. The synthesized nanocomposites in the visible region exhibited good photodegradation percentages of approximately 97.5% and 98.6% after 120 min of irradiation for pure rGO, Ag NPs, and Ag/rGO nanohybrid, respectively. Furthermore, the Ag/rGO nanohybrid maintained their degradation ability for up to three cycles. The synthesized Ag/rGO nanohybrid demonstrated enhanced photocatalytic activity, expanding their potential for environmental remediation. Based on the investigations, Ag/rGO nanohybrid proved to be an effective photocatalyst and holds promise as an ideal material for future applications in preventing water pollution.

Systems genetics identifies miRNA-mediated regulation of host response in COVID-19

BACKGROUND

Individuals infected with SARS-CoV-2 vary greatly in their disease severity, ranging from asymptomatic infection to severe disease. The regulation of gene expression is an important mechanism in the host immune response and can modulate the outcome of the disease. miRNAs play important roles in post-transcriptional regulation with consequences on downstream molecular and cellular host immune response processes. The nature and magnitude of miRNA perturbations associated with blood phenotypes and intensive care unit (ICU) admission in COVID-19 are poorly understood.

RESULTS

We combined multi-omics profiling-genotyping, miRNA and RNA expression, measured at the time of hospital admission soon after the onset of COVID-19 symptoms-with phenotypes from electronic health records to understand how miRNA expression contributes to variation in disease severity in a diverse cohort of 259 unvaccinated patients in Abu Dhabi, United Arab Emirates. We analyzed 62 clinical variables and expression levels of 632 miRNAs measured at admission and identified 97 miRNAs associated with 8 blood phenotypes significantly associated with later ICU admission. Integrative miRNA-mRNA cross-correlation analysis identified multiple miRNA-mRNA-blood endophenotype associations and revealed the effect of miR-143-3p on neutrophil count mediated by the expression of its target gene BCL2. We report 168 significant cis-miRNA expression quantitative trait loci, 57 of which implicate miRNAs associated with either ICU admission or a blood endophenotype.

CONCLUSIONS

This systems genetics study has given rise to a genomic picture of the architecture of whole blood miRNAs in unvaccinated COVID-19 patients and pinpoints post-transcriptional regulation as a potential mechanism that impacts blood traits underlying COVID-19 severity. The results also highlight the impact of host genetic regulatory control of miRNA expression in early stages of COVID-19 disease.

Development of biohybrid Ag2CrO4/rGO based nanocomposites with stable flotation properties as enhanced Photocatalyst for sewage treatment and antibiotic-conjugated for antibacterial evaluation

The proposed research outlines a facile method to synthesize Silver Chromate/reduced graphene oxide nanocomposites (Ag₂CrO₄/rGO NCs) with a narrow dissemination size for the ecological treatment of hazardous organic dyes. The photodegradation performance toward the decontamination of model artificial methylene blue dye was assessed under solar light irradiation. The crystallinity, particle size, recombination of photogenerated charge carriers, energy gap and surface morphologies of synthesized nanocomposites were determined. The experiment objective is to use rGO nanocomposites to increase Ag₂CrO₄ photocatalytic efficiency in the solar spectrum. Tauc plots of ultraviolet-visible (UV-vis) spectrum were used to calculate the optical bandgap energy of the produced nanocomposites ~1.52 eV, which resulted in a good photodegradation percentage of ~92 % after 60 min irradiation of Solar light. At the same time, pure Ag₂CrO₄ and rGO nanomaterials showed ~46 % and ~ 30 %, respectively. The ideal circumstances were discovered by investigating the effects of several parameters, including catalyst loading and different pH levels, on the degradation of dyes. However, the final composites maintain their ability to degrade for up to five cycles. According to the investigations, Ag₂CrO₄/rGO NCs are an effective photocatalyst and can be used as the ideal material to prevent water pollution. Furthermore, antibacterial efficacy for the hydrothermally synthesized nanocomposite was tested against gram-positive (+ve) bacteria viz. Staphylococcus aureus and gram-negative (-ve) bacteria viz. Escherichia coli. The maximum zone of inhibition for S. aureus and E. coli were 18.5 and 17 mm, respectively.

Facile synthesis of carbon/titanium oxide quantum dots from lignocellulose-rich mandarin orange peel extract via microwave irradiation: Synthesis, characterization and bio-imaging application

A nanohybrid prepared from the lignocellulosic residue is a feasible approach to synthesize blue light emitting fluorescent doped TiO₂ quantum dot nanocomposite (C-TiO₂ QDs) by microwave techniques using Mandarin orange (Citrus reticulata) peel powder with titanium isopropoxide precursors. With a greater orange peel colloidal medium, the structure of the TiO₂-NPs changed from a mixture of rutile and anatase phases to exclusively the anatase phase. The optical and morphological properties of as-prepared C-TiO₂ QDs were characterized by HR-TEM, XRD, FT-IR, UV-visible, PL spectra, DLS, and Zeta potential techniques. The reaction condition was optimized by changing substrate composition, pH, and reaction time. C-TiO₂ QDs exhibit outstanding stability at pH 7 and remain sustained for at least 180 days without aggregation. As prepared C-TiO₂ QDs have distinct emission and excitation activities with an average particle size of 2.8 nm. Cell viability was performed on normal L929 cells, where it showed excellent biocompatibility (<90 %) even at the concentration of 200 μg/mL after 24 h treatment. Additionally, the synthesized C-TiO₂ QDs were used with L929 cells as a fluorescent probe for bio-imaging applications. The results revealed that neither of the cell lines' morphologies had significantly changed, proving the biocompatibility of the synthetic C-TiO₂ QDs.

Biodegradation of neonicotinoid insecticide acetamiprid by earthworm gut bacteria Brucella intermedium PDB13 and its ecotoxicity

Extensive use of neonicotinoid insecticides in recent decade had contaminated water and soil systems and poses serious environmental and health risk. Microbial degradation of toxic contaminants in the environment has been established as a sustainable tool towards its remediation. Under this context, the present study focused on the biodegradation of neonicotinoid insecticide acetamiprid, by bacterial strain Brucella intermedia PDB13 isolated from the gut of the acetamiprid exposed earthworms. To enhance acetamiprid biodegradation, suitable parameters such as pH, temperature, inoculum size and acetamiprid concentration range were optimised using Response Surface Methodology (RSM). The experimental results showed that the Brucella intermedium PDB13 can tolerate and degrade relatively high concentrations of acetamiprid (50 - 350 mg L^-1). The results confirmed that maximum degradation of about 89.72% was achieved under optimized conditions. Further, confirmation of acetamiprid biodegradation was assessed through the occurrence of its degraded metabolites through HPLC, FTIR, and LCMS analysis. Based on this analysis, possible acetamiprid biodegradation pathway by Brucella intermedia PDB13 was proposed. Additionally, cytotoxicity, earthworm acute toxicity, and zebrafish embryo toxicity studies were also performed to assess the toxicity variations between the parent compound and its metabolites. The acetamiprid treated group resulted in cytotoxic effects apparently, with the increase in aberrant cells frequency (22.5 ± 3.3), when compared with its metabolites (2.3 ± 4.3) and control (1.9 ± 5.6) respectively. All these results evidently reported the degradation potential of Brucella intermedia PDB13, thereby establishing the scope for further advanced biodegradation studies towards mitigating the pesticide pollution.

Synthesizing Ag2Ox(3 wt%)-loaded ZnFe2O4 photocatalysts for efficiently saving polluted aquatic ecosystems

Herein, we report an Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts synthesized by co-precipitation and incipient wet impregnation approach for acetamiprid degradation, antibacterial, antioxidant, and toxicity assay. Initially, bare ZnFe2O4 nanostructures were made through a simple co-precipitation method. In the second step, 3 wt% of various transition metal oxides (CuOx, ZrOx, and Ag2Ox) were embedded on the surface of ZnFe2O4 photocatalysts via a wet impregnation method. Further, the prepared photocatalysts were systematically characterized using XRD, FTIR, FE-SEM, BET, HRTEM, and XPS analysis. The optimum Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts revealed higher degradation efficiencies for acetamiprid under sunlight irradiation. Additionally, the Ag2Ox (3 wt%)-loaded ZnFe2O4 photocatalysts showed more effective antioxidant and antibacterial activity than blank and bare ZnFe2O4 nanomaterials. The enriched catalytic efficiency can be accredited to the 3 wt% of Ag2Ox NPs loaded on ZnFe2O4 nanomaterials, possibly due to the boosted transport properties of the electron-hole pairs. This study will provide a new avenue for the development of simple and effective photocatalysts for efficiently saving polluted aquatic ecosystems.

Synergistic role of in-situ Zr-doping and cobalt oxide cocatalysts on photocatalytic bacterial inactivation and organic pollutants removal over template-free Fe2O3 nanorods

Herein, we synthesized in-situ Zr-doped Fe₂O₃ NRs photocatalyst by successive simple hydrothermal and air quenching methods. The synergistic roles of CoO_x (1 wt%) and Zr-doping on bacteria inactivation and model organic pollutants over Fe₂O₃ NRs photocatalyst were studied in detail. Initially, rod-like Zr ((0-8) %)-doped Fe₂O₃ NRs were produced via a hydrothermal method. CoO_x was loaded onto the Zr ((0-8) %)-doped Fe₂O₃ NRs) surface by a wet impregnation approach. The Zr-doping conditions and CoO_x loadings were judiciously optimized, and a highly photoactive CoO_x(1 wt%)/Zr(6%)-doped Fe₂O₃ NRs photocatalyst was developed. The CoO_x(1 wt%) loaded Zr(6%)-doped Fe₂O₃ NRs photocatalyst revealed 99.4% inactivation efficiency compared with (0, 4 and 8)% Zr-doped Fe₂O₃ NRs, respectively. After CoO_x(1 wt%)/Zr(6%)-doped Fe₂O₃ NRs photocatalyst treatment, Bio-TEM images of bacterial cells showed extensive morphological deviations in cell membranes, compared with the non-treated ones. Additionally, the optimum CoO_x(1 wt%)/Zr(6%)-doped Fe₂O₃ NRs photocatalyst exhibited 99.2% BPA and 98.3% orange II dye degradation after light radiation for 3 h. This work will provide a rapid method for the development of photostable catalyst materials for bacterial disinfection and organic degradation.

Constructing Z-scheme g-C3N4/TiO2 heterostructure for promoting degradation of the hazardous dye pollutants

The use of dyes and segments has increased widely in recent years, but it poses a serious health risk to ecosystems. In this work, TiO₂ and two-dimensional g-C₃N₄ nanosheets (g-CN) were fabricated through co-precipitation and thermal polymerization technique, respectively. The g-CN-TiO₂ photocatalyst (1: 3, 2: 2, 3: 1) in various weight percentages was prepared using a simple impregnation process. The photocatalytic behaviour of the g-CN, TiO₂ NPs, and different weight percentages of g-CN-TiO₂ photocatalyst was evaluated against methylene blue (MB) dye under UV-visible light illumination. Compared to pristine and other weight percentages of the g-CN-TiO₂ nanocomposite, the optimized g-CN-TiO₂ nanocomposite (3:1) showed promoted performance against MB dye. The enriched catalytic efficiency can be accredited to the low amount of TiO₂ nanoparticles deposited on gCN nanosheets, possibly due to the boosted transport properties of the electron-hole pairs. The enriched photocatalytic behaviour can be attributed to the development of the Z-scheme system between TiO₂ and g-CN. The current study is an outstanding demonstration of the development of maximum catalytic efficiency for destroying hazardous chemical dyes.

Reduced graphene oxide: Biofabrication and environmental applications

Green synthesis of high-quality reduced graphene oxide (rGO) from agro-industrial waste resources remains attractive owing to its outstanding environmental benefits. The remarkable properties of rGO include excellent morphology, uniform particle size, good optical properties, high conductivity, nontoxicity, and extraordinary chemical stability. Traditional methods for the synthesis of rGO nanomaterials involve several chemical reactions including oxidation, carbonization, toxic solvent, and pyrolysis which produce harmful byproducts. Green preparation of rGO is an emerging area of research in graphene technology which is cost-effective and sustainable in the procedure. Owing to the uniform particle rGO particle size, these smart nanomaterials have wide applicability, including in metal ions and pollutant sensing and adsorption, photocatalysis, optoelectrical devices, medical diagnosis, and drug delivery. Here we review the physicochemical properties of rGO, the biowaste sources and green methods of rGO synthesis, and the diverse applications of rGO, including in water purification and the biomedical fields. With this review, covering more than 200 research articles published on rGO in the last eight years ending in 2022, we aim to provide a quick guide for researchers seeking up-to-date information on the properties, production, and applicability of rGO, with special attention to rGO applications in water purification and the biomedical fields.

Visible light photocatalytic and magnetic properties of V doped α-Fe2O3 (VFO) nanoparticles synthesized by polyol assisted hydrothermal method

Vanadium-doped α-Fe₂O₃ nanoparticles (VFO nanoparticles) were prepared by polyol-assisted hydrothermal method. The impact on the structure, optical, magnetic and photocatalytic properties of α-Fe₂O₃ nanoparticles were studied by varying the vanadium concentration from 1 to 5%. XRD analysis confirms the presence of hematite phase with hexagonal structure and estimates the nanocrystals size as ∼26-38 nm. FESEM and TEM reveal the formation of 3D flower-like morphology bundled with 2D nanoflakes. The estimated band gap energy was in the range 2.01 eV-2.12 eV. XPS study shows the presence of vanadium in V⁴⁺ oxidation state in VFO nanoparticles. VSM study shows a non-saturated hysteresis loop with weak ferromagnetic behavior for all the VFO nanoparticles. 5% V doped α-Fe₂O₃ nanoparticles (5%VFO nanoparticles) exhibited superior visible light driven photocatalytic activity compared to other samples.

Polyol-assisted hydrothermal synthesis of Mn-doped α - Fe2O3(MFO) nanostructures: Spin disorder-induced magnetism and photocatalytic properties

Hierarchical nanostructures play an important role in environmental clean-up and sustainability applications. The magnetic and photocatalytic characteristics of flower-like Mn-doped α-Fe₂O₃ nanostructures were prepared by using a polyol-assisted hydrothermal method. Crystallite sizes are in the range of 35-42 nm, and the existence of 3D hierarchical nanostructures was observed in FESEM pictures. The optical band gap energy varies between 2.08 and 2.16 eV, while XPS examination exposes the ions' charge states and validates Mn³⁺ inclusion in the Fe³⁺ lattice. At room temperature, the addition of Mn to α-Fe₂O₃ results in a spin disorder ferromagnetism and coercivity of about 600 Oe was achieved. Methylene blue (MB) dye solution degraded by 92% when 2.5% Mn doped with α-Fe₂O₃ under visible conditions for 120 min irradiation time.

Green synthesis of carbon quantum dots and their environmental applications

Green synthesis of scalable, high-quality, fluorescent carbon quantum dots (CQDs) from natural biomass remains attractive due to their outstanding environmental application. CQDs are an emerging class of zero-dimensional carbon nanomaterials (<10 nm) that have recently attracted much attention due to their strong optical properties, biocompatibility, nontoxicity, uniform particle size, high photostability, low-cost synthesis, and highly tunable photoluminescence. The unique properties of CQDs possess a broad range of prospective applications in a number of fields such as metal ions detection, photocatalysis, sensing, medical diagnosis, bioimaging, and drug delivery. CQD nanostructures are synthesized using various techniques such as hydrothermal method, laser ablation, microwave irradiation, electrochemical oxidation, reflux method, and ultrasonication. However, this type of fabrication approach requires several chemical reactions including oxidation, carbonization, and pyrolysis. Green synthesis of CQDs has several advantages such as the use of low-cost and non-toxic raw materials, renewable resources, simple operations, and being environment-friendly. This review article will discuss the physicochemical properties of CQDs techniques used in the production of CQDs, and the stability of CQDs along with their applications in wastewater treatment and biomedical fields.

An efficient optical properties of Sn doped ZnO/CdS based solar light driven nanocomposites for enhanced photocatalytic degradation applications

Metal sulfide - semiconductor nanocomposites synthesized with well-defined tin metal, exhibited the wide bandgap, the absorptions are limited to the UV-vis region for reduction of Reactive Blue 160 (RB 160) under solar light irradiation. The prepared samples were characterized using optoelectronic techniques. Conveniently, a wider range of wavelengths and physical properties can be enabled by doping these metal oxide nanoparticles. Whereas the photoreduction of RB 160 is unambiguously associated within charge separation and transmission progression from the excited Sn doped ZnO/CdS. Furthermore, Photocatalytic degradation efficiency for the Sn doped ZnO/CdS composites still reliant on the excitation strength, indicating the several electrons and protons were precise as a result of charge separation and transmission in prepared catalyst. Sn doped ZnO/CdS composites shows 94% Photocatalytic degradation efficiency within 120 min under sunlight irradiation. This photocatalytic nanocomposites may find capable applications in solar cells to power stretchable and also in wearable electronics.

Nanostructured nickel doped zinc oxide material suitable for magnetic, supercapacitor applications and theoretical investigation

This Paper describes the synthesis of nickel doped ZnO is planned by chemical co-precipitation techniques. The prepared nanostructured nickel doped zinc oxide samples were analyzed by thermogravimetric differential thermal analysis (TG/DTA), X-ray diffraction (XRD), Fourier transform infra red (FTIR), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), electron paramagnetic resonance (EPR), and cyclic voltametry (CV). Nanostructure nickel doped ZnO materials have developed as promising for the basis of its broad range of employing in diverse areas. The attractive properties of nickel doped ZnO materials are highly demanded in high-energy potential applications. The nickel doped zinc oxide materials are hexagonal wurtzite arrangement is confirmed by XRD. The morphological -features of FE-SEM show nickel doped zinc oxide NPs are the structure of spherical type with agglomeration. The calculated particle size 11 nm is confirmed by HR-TEM. EPR spectra of nickel doped zinc oxide nanoparticles are ferromagnetic nature. Further, CV studies of Ni doped ZnO materials of the specific capacitance value is 133 Fg^-1 at the scan rate 10 mVs^-1 it is suitable for super capacitor application. The quantum chemical calculations were done by using DFT techniques through B3LYP/LANL2DZ level of basis set.

Microwave-assisted thermochemical conversion of Zr-FeOOH nanorods to Zr-ZnFe2O4 nanorods for bacterial disinfection and photo-Fenton catalytic degradation of organic pollutants

Herein, we report a CoO_x-loaded Zr-doped ZnFe₂O₄ (CoO_x/Zr-ZFO) NR photocatalyst synthesized by successive microwave and wet impregnation methods for bacterial inactivation and degradation of organic pollutants. For the first time, microwave treatment was used for Zn attachment on hydrothermally synthesized self-assembled Zr-FeOOH NRs to produce Zr-doped ZnFe₂O₄ (Zr-ZFO) NRs. The lowest bandgap energy (1.96 eV) enables for significant absorption in the visible light region, which helps to improve bacteria degradation inactivation efficiency. Further, various metal oxides (Cu, Ag and Co) were loaded onto the surface of photocatalysts (Zr-ZFO NRs) by a wet impregnation method. As-synthesized CoO_x/Zr-ZFO-3 NRs were systematically characterized and used as photocatalysts for inactivation of E. coli and S. aureus and degradation of organic pollutants. The CoO_x/Zr-ZFO-3 NR photocatalyst exhibited better inactivation efficiency (99.4 %) than other metal oxide-loaded Zr-ZFO NRs (Ag₂O_x-loaded Zr-ZFO NRs (33.6 %), CuO_x-loaded Zr-ZFO NRs (77.6 %)). Additionally, the optimum CoO_x/Zr-ZFO-3 NR photocatalyst showed 98.3 % and 98.1 % degradation efficiencies for BPA and orange II dye, respectively, under visible light irradiation (λ ≥ 420 nm). Therefore, this work affords a novel, simple and rapid approach for the development of photocatalysts which active in visible light for bacterial disinfection and organic degradation.

Construction of SnO2/g-C3N4 an effective nanocomposite for photocatalytic degradation of amoxicillin and pharmaceutical effluent

The current study mainly focused on the fabrication of 2D graphitic carbon nitride-supported tin oxide nanoparticles (SnO₂/g-C₃N₄) for the effective degradation of Amoxicillin (AMX). Tin oxide (SnO₂) NPs were prepared by green and easy modification technique, and then it is decorated over g-C₃N₄ nanosheets. The structural morphology and surface composition of the synthesized SnO₂/g-C₃N₄ nanocomposite were fully analysed by UV-Vis, XRD, XPS, and HR-SEM with EDAX, FT-IR, and BET analysis. The (HR-TEM) microscopy, the size of SnO₂ NPs which as a diameter is about 6.2 nm. The Raman analysis revealed that the SnO₂/g-C₃N₄ composite had a moderate graphitic structure, with a measured I_D/I_g value of 0.79. The degradation efficiency of antibiotic pollutant AMX and pharma effluent treatment was monitored by UV spectroscopy. The optical band gap of SnO₂ (2.9 eV) and g-C₃N₄ (2.8 eV) photocatalyst was measured by Tauc plots. To investigate the mechanism through the photodegradation efficiency of the catalyst was analysed by using different Scavenger EDTA-2Na holes (h⁺) has a greater contribution towards the degradation process. Under visible irradiation, SnO₂/g-C₃N₄ nanocomposite has exhibited an excellent degradation performance of 92.1% against AMX and 90.8% for pharmaceutical effluent in 80 min.

Ceria nanoparticles anchored on graphitic oxide sheets (CeO2-GOS) as an efficient catalyst for degradation of dyes and textile effluents

Herein, we report a Ceria-graphitic oxide sheets (CeO₂-GOS) nanocomposites photo catalyst synthesized by simple and green methods for the degradation of textile effluents and dyes. In the first step, green treated CeO₂ NPs were synthesized through a simple organic reduction method. Further, green synthesized CeO₂ NPs were anchored with GOS to produce CeO₂-GOS nanocomposites by a sol-gel method. The phase morphology and structure of CeO₂-GOS nanocomposites was systematically characterized through X-ray diffraction, Raman spectroscopy, zeta potential, Fourier transform infrared spectroscopy (FT-IR), High-Resolution Transmission Electron Microscope (HR-TEM), and X-ray photoelectron spectroscopy (XPS) analysis. Under visible light irradiation, the CeO₂-GOS nanocomposites photo catalyst exhibited 83%, 78%, and 70% degradation efficiencies for rhodamine B, methylene blue, and textile effluent, respectively. Due to the synergistic impact of GO, it act as an elastic conductive channel permitting improved charge transport, the fabricated CeO₂-GOS nanocomposites showed a significant retort to photo catalysis of rhodamine B, methylene blue, and textile effluent. CeO₂-GOS nanocomposites may yield unique insight into the synthesis of green nanocomposites and their application in environmental remediation due to their better photo catalytic activity.

Enhanced sun light driven photocatalytic activity of Co doped SnO2 loaded corn cob activated carbon for methylene blue dye degradation

SnO₂ with different Co²⁺ doping concentrations and Co (0.075 M): SnO₂ loaded corn cob activated carbon (Co: SnO₂/CCAC) were prepared, and are labelled as CS1, CS2, CS3 and CS2/CCAC, respectively. The CS2/CCAC showed that the particle size (18.76 nm) and band gap (3.50 eV) are reduced with Co²⁺ doping and CCAC loading. Moreover, CS2/CCAC indicate that the decreased PL intensity and its lower value (2.156 kΩ) of impedance from EIS results which indicates the increased separation of the photogenerated e^-/h⁺ pairs. Thus, the result showed that CS2/CCAC maximum degradation efficiency of MB (95.38%) and the photocatalytic mechanism is also discussed.

Antinociceptive and anti-inflammatory activities of butein in different nociceptive and inflammatory mice models

Background

Around 30% world population affected by acute and chronic pain due to inflammation and accidental injuries. Pain is a uncomfortable sensation and it reduce the patients’ life quality.

Objective

The present exploration focuses to explore the beneficial effects of butein on the different chemical and thermal-provoked nociceptive and inflammatory mice models.

Methodology

The nociception was induced to the Swiss mice using different chemical (formalin, acetic acid, glutamate, and capsaicin) and thermal (hot plate and tail immersion) methods. the mice were supplemented with 10, 15, and 20 mg/kg of butein and respective standard drugs like morphine, diclofenac sodium, and dexamethasone. The anti-inflammatory effects of butein was studied using carrageenan-provoked inflammation in mice.

Results

The present findings clearly demonstrated that the butein was substantially lessened the different thermal and chemical provoked nociception in mice. The carrageenan-triggered paw edema and inflammatory cell infiltrations were appreciably suppressed by the butein treatment. The TNF-α, IL-1β, and IL-6 levels in the carrageenan-induced mice were effectively depleted by the butein.

Conclusion

Altogether, the present findings evidenced the potent antinociceptive and anti-inflammatory properties of the butein in different nociceptive mice models.

Lung cancer induced by Benzo(A)Pyrene: ChemoProtective effect of sinapic acid in swiss albino mice

Cancer of lung is the utmost typical cause of death and the number of cases is increasing rapidly, which has emerged as a major leading health problem. A large amount of reports suggested that Benzo(a)pyrene [B(a)P] in cigarette smoke plays the major function in an initiation of cancer of lung. Cancer prevention or chemoprevention has become a compelling approach recently for treatment of lung cancer. So, discovering a fresh candidate with reduced toxicity for targeting lung cancer is vital and urgent. Sinapic acid which is a widely extracted in various vegetables and fruit exhibits rich anti-oxidant content, anti-inflammatory and anti-tumor activity. But, the chemopreventive action of sinapic acid against lung cancer initiated by B[a]P remain unclear. Following, an in-vivo B[a]P-stimulated lung cancer in swiss albino mice and an in-vitro human lung cancer cell (A549) model were established to examine the chemopreventive activities of sinapic acid. The levels of immunoglobulins (IgG and IgM), oxidative and inflammatory markers, and tumor markers level was studied using kits and standard methods. The results showed administration of sinapic acid ameliorates the exposure of B[a]P mediated lung cancer in swiss albino mice by a decline in IgG and IgM level, leukocyte count, neutrophil function tests, soluble immune complex, lipid peroxidation, pro-inflammatory cytokines, tumor markers (AHH, LDH, GGT, 5'NT and CEA) and enhanced phagocytic index, activity index and antioxidant defense enzymes. In addition, in-vitro studies showed potential cytotoxicity against human lung cancer and exhibited a potential cytotoxic (MTT assay) and apoptotic activity by elevation of ROS production and caspase activity (caspase-3 and caspase-9). Collectively, the results, clearly specifies sinapic acid can be utilized as an effective chemo preventative agent against lung carcinogenesis.

Visible-Light-Active CuO x -Loaded Mo-BiVO4 Photocatalyst for Inactivation of Harmful Bacteria (Escherichia coli and Staphylococcus aureus) and Degradation of Orange II Dye

In the present study, Mo-BiVO4-loaded and metal oxide (MO: Ag2Ox, CoOx, and CuOx)-loaded Mo-BiVO4 photocatalysts were synthesized using a wet impregnation method and applied for microbial inactivation (Escherichia coli and Staphylococcus aureus) and orange II dye degradation under visible-light (VL) conditions (λ ≥ 420 nm). The amount of MO cocatalysts loaded onto the surface of the Mo-BiVO4 photocatalysts was effectively controlled by varying their weight percentages (i.e., 1-3 wt %). Among the pure Mo-BiVO4, Ag2Ox-, CoOx-, and CuOx-loaded Mo-BiVO4 photocatalysts used in bacterial E. coli and S. aureus inactivation under VL irradiation, the 2 wt % CuOx-loaded Mo-BiVO4 photocatalyst showed the highest degradation efficiency of E. coli (97%) and S. aureus (99%). Additionally, the maximum orange II dye degradation efficiency (80.2%) was achieved over the CuOx (2 wt %)-loaded Mo-BiVO4 photocatalysts after 5 h of radiation. The bacterial inactivation results also suggested that the CuO x -loaded Mo-BiVO4 nanostructure has significantly improved antimicrobial ability as compared to CuOx/BiVO4. The enhancement of the inactivation performance of CuOx-loaded Mo-BiVO4 can be attributed to the synergistic effect of Mo doping and Cu2+ ions in CuOx, which further acted as an electron trap on the surface of Mo-BiVO4 and promoted fast transfer and separation of the photoelectron (e-)/hole (h+) pairs for growth of reactive oxygen species (ROS). Furthermore, during the bacterial inactivation process, the ROS can disrupt the plasma membrane and destroy metabolic pathways, leading to bacterial cell death. Therefore, we provide a novel idea for visible-light-activated photocatalytic antibacterial approach for future disinfection applications.

The rapid response and high sensitivity of a ruthenium-doped copper ferrite thin film (Ru-CuFe2O4) sensor

A sensor displaying a rapid response and high sensitivity was developed by following a simple route. Ionic defects in this sensor were explored using X-ray diffraction analysis. In general, such defects arise from a mismatch of ionic radii, which actually improves the sensing performance. SEM and TEM images of the currently produced particles demonstrated negligible agglomeration, which greatly enhanced the flow of water molecules through the particles. The current sensor showed a rapid response to changes in humidity. Its sensing performance was classified into three different ranges of humidity. Of these humidity ranges, the sensor showed the highest sensitivity (8.84 MΩ per %RH) at low relative humidity (10-20% RH). Furthermore, the sensitivity fall off as the RH was increased from 20 to 99%. The sensor showed a rapid response time of 20 s. Also, the sensor showed 92.98% reproducibility and few effects of aging.

A reliable chemiresistive sensor of nickel-doped tin oxide (Ni-SnO2) for sensing carbon dioxide gas and humidity

Herein, we report the chemiresistive gas and humidity sensing properties of pristine and nickel-doped tin oxide (Ni-SnO₂) gas sensors prepared by a microwave-assisted wet chemical method. The structural and optical properties are characterised using X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy, ultraviolet spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The structural elucidation and morphology analyses confirm a particle size of 32–46 nm, tetragonal rutile crystal structure and small cauliflower-type surface appearance. Nickel doping can tune the structure of NPs and morphology. The tested carbon dioxide gas and humidity sensing properties reveal a rapid sensing performance with high-to-moderate sensitivity. Also, the materials favour gas sensing because their sensitivity is enhanced with the increase in nickel concentration. The sensing results suggest that nickel is a vibrant metal additive to increase the gas sensitivity of the sensor. However, nickel doping decreases the electron density and increases the oxygen vacancies. Ultimately, the gas sensor produces highly rapid sensing with a response time of 4 s.

Herein, we report the chemiresistive gas and humidity sensing properties of pristine and nickel-doped tin oxide (Ni-SnO₂) gas sensors prepared by a microwave-assisted wet chemical method.

Synthesis, study of structure activity relationship and evaluation of biological activities of substituted (E)-2-Benzylidene-N-Methylhyrazinecarbothioamides

A series of ten substituted (E)-2-benzylidene-N-methylhydrazinecarbothioamides were synthesized from 4-methyl-3-thiosemicarbazide with substituted benzaldehydes. All the synthesized compounds were in good agreement with elemental and spectral data (UV, FT-IR, 1H NMR and 13C NMR). The assigned UV λmax (nm), IR νC=N (cm-1), NMR δ1H (ppm) CH=N and δ13C (ppm) C=N spectral data of (E)-2-benzylidene-N-methylhydrazinecarbothioamides correlated with Hammett constants using single and multi-regression analysis. From the results of correlation analysis substituent effects on the spectral data have been discussed. The antibacterial activity of (E)-2-benzylidene-N-methylhydrazinecarbothioamides have been studied with three Gram-positive pathogenic bacterial strains namely (B. subtilis, S. aureus and S. pyogens) and two Gram-negative strains (E. coli and P. aeruginosa). The antifungal activity of (E)-2-benzylidene-N-methyl hydrazones studied with three fungal species (A. flavus, A. niger, T. viride) using disk diffusion method. 

Tropical Pyomyositis: Revisited

Since the initial description of tropical pyomyositis 130 years ago, this disease continues to retain some mystery for physicians and surgeons. The infrequency, variable epidemiologic and demographic profile, diagnostic dilemmas and limited literature continue to make it an enigma with limited understanding. In the span of nearly 130 years, worldwide English literature search has revealed an average of only two to three reported cases every year globally. We recently managed a case of tropical pyomyositis which posed a clinical and radiologic diagnostic dilemma. The rarity of disease and published literature prompted us to garner demographic and disease characteristics data from historical review of two Pan-Indian journals, with the aim of aiding management. Data has been screened since 1950 from the Medical Journal Armed Forces India (MJAFI) and the Indian Journal of Surgery (IJS), which report cases from different geographical conditions and ethnicity all over the nation. We found only six case reports in the MJAFI, while there was surprisingly no publication regarding pyomyositis in the IJS. We present a case report of a 39-year-old male who developed pyomyositis of the left calf muscle and review published data from these journals over the last 65 years.