Multifunctional Graphene Sensor Ensemble as a Smart Biomonitoring Fashion Accessory

Biomonitoring wearable sensors based on two-dimensional nanomaterials have recently elicited keen research interest and potential for a new range of flexible nanoelectronic devices. Practical nanomaterial-based devices suited for real-world service, which exhibit first-rate performance while being an attractive accessory, are still distant. We report a multifunctional flexible wearable sensor fabricated using an ultrathin percolative layer of graphene nanosheets on laser-patterned gold circular interdigitated electrodes for monitoring vital human physiological parameters. This graphene on laser-patterned electrode (GLE) sensor displays an excellent strain resolution of 245 με (0.024%) and a record high gauge factor of 6.3 × 10⁷, with exceptional stability and repeatability in its operating range. The sensor was tested for human physiological monitoring like measurement of heart rate, breathing rate, body temperature, and hydration level, which are vital health parameters, especially considering the current pandemic scenario. The sensor also served in applications such as a pedometer, limb movement tracker, and control switch for human interaction. The innovative laser-etch process used to pattern gold thin-film electrodes, with the multifunctional incognizable graphene layer, provides a technique for integrating multiple sensors in a wearable band. The reported work marks a giant leap from the conventional banal devices to a highly marketable multifunctional sensor array as a biomonitoring fashion accessory.

Flexible strain sensor with high sensitivity, fast response, and good sensing range for wearable applications

Flexible strain sensors are emerging rapidly and overcoming the drawbacks of traditional strain sensors. However, many flexible sensors failed to balance the sensitivity, response time, and the desired sensing range. This work proposes a novel and cost-effective strain sensor which simultaneously achieved high sensitivity, fast response, and a good sensing range. It illustrates a prototype strain sensor realized with a nanocomposite constituting reduced graphene oxide and palladium as the primary sensing elements. These sensors were fabricated with manual screen-printing technology. The sensor exhibited an outstanding performance for the different strains ranging from 0.1% to 45%. As a result, a substantially high gauge factor around 1523 at a strain of as high as 45% and a rapid response time of 47 ms was obtained. This work demonstrated potential applications like real-time monitoring of pulse and respiration, and other physical movement detection, which become crucial parameters to be measured continuously during the COVID-19 pandemic.

Laser-Induced Direct Patterning of Free-standing Ti3C2-MXene Films for Skin Conformal Tattoo Sensors

The discovery of stable two-dimensional (2D) materials has effectuated a rapid evolution of skin conformal sensors for health monitoring via epidermal electronics. Among the newly discovered 2D materials, MXene stands out as a solution-processable 2D material allowing easy fabrication of highly conductive thin films with the potential to realize flexible skin conformal sensors. Here, we present a successful demonstration of a Ti₃C₂-MXene resistor as an extremely sensitive strain sensor in the form an ultrathin skin mountable temporary tattoo. The skin conformability and form factor afforded by the sensor promises inconspicuous and continuous monitoring of vital health parameters of an individual, like the pulse rate, respiration rate, and surface electromyography. The sensor serves as a single conduit for sensing the respiration rate and pulse, dispensing with the need of mounting multiple sensors. Its remarkably high sensitivity with a gauge factor of ∼7400 has been ascribed to development of nanocracks and their propagation through the film upon application of strain. The fast response and highly repeatable sensor follows easy fabrication steps and can be patterned into any shape and size using a laser.

Electric Spark Induced Instantaneous and Selective Reduction of Graphene Oxide on Textile for Wearable Electronics

Reduced graphene oxide (rGO) attracts great popularity as an alternative to pristine graphene because of the facile synthesis process of its precursor, graphene oxide (GO). Electrical conduction of GO is tunable, subject to the extent of reduction of oxygen functional groups in it. This work for the first time demonstrates rapid reduction of GO using spark at ambient conditions. A stream of spark generated by applying high electric potential across two electrodes, when passed through a film of GO deposited on a porous substrate, reduces it into rGO. Upon sparking, the electrical resistance of the GO film drops down by an order of six within a second, making the reduction process instantaneous. X-ray photoelectron spectroscopy and Raman spectra of spark-reduced graphene oxide (SrGO) films revealed a high C/O ratio with an increase in the domain of sp²-hybridized carbon. The electromechanical properties of SrGO were practically examined by testing it as a flex sensor by incorporating its films with commercially available gloves. It showed high sensitivity for bending and good repeatability while offering an easy route for textile integration, making an impactful statement about the potential of sparking as a cost-effective method to reduce GO on a large scale.

Highly sensitive, scalable reduced graphene oxide with palladium nano-composite as strain sensor

We report a novel strain sensor based on reduced graphene oxide (rGO) with palladium (Pd) nano-composite. The sensor was fabricated on the SS304 stainless-steel substrate using a screen-printing method. Graphene oxide was synthesized using a modified Hummer's method and reduced using a chemical route. Field emission-scanning electron microscope, x-ray diffraction and Raman spectroscopy were used to characterize the as-synthesized nano-composite. The as-fabricated strain sensor was tested for tensile strain using Micro-universal Test Machine and the change in resistance for different strains was recorded. The sensor response was observed to be stable and linear within the applied strain range of 0-3000 microstrains, and an average gauge factor of 42.69 was obtained in this range.

High-range noise immune supersensitive graphene-electrolyte capacitive strain sensor for biomedical applications

This paper presents development and performance assessment of an innovative and a highly potent graphene-electrolyte capacitive sensor (GECS) based on the supercapacitor model. Although graphene has been widely researched and adapted in supercapacitors as electrode material, this combination has not been applied in sensor technology. A low base capacitance, generally the impeding factor in capacitive sensors, is addressed by incorporating electric double layer capacitance in GECS, and a million-fold increase in base capacitance is achieved. The high base capacitance (∼22.0 μF) promises to solve many inherent issues pertaining to capacitive sensors. GECS is fabricated by using thermally reduced microwave exfoliated graphene oxide material to form interdigitated electrodes coated with solid-state electrolyte which forms the double layer capacitance. The capacitance response of GECS on subjecting to strain is examined and an enormous operating range (∼300 nF) is seen, which is the salient feature of this sensor. The GECS showed an impressive device sensitivity of 11.24 nF kPa-1 and good immunity towards noise i.e. lead capacitance and stray capacitance. Two regimes of operation are identified based on the procedure of device fabrication. The device can be applied to varied applications and one such biomedical application of breath pattern monitoring is demonstrated.

Daunomycin inhibits the uptake of adenine, amino acids, and glucose into cardiac myocytes

Daunomycin and adriamycin are widely used antitumor agents which induce dose-dependent cardiotoxicity. The mechanisms by which daunomycin causes cardiotoxicity have been investigated in neonatal rat cardiac myocytes maintained in tissue culture. Daunomycin inhibited the uptake of adenine, amino acids, and deoxyglucose in a dose-dependent fashion. The uptake of both adenine and methionine was inhibited without any delay while the glucose uptake (deoxyglucose) was inhibited after a delay of 2 hr. Since daunomycin affected the uptake of both adenine and amino acids without any delay and since daunomycin did not affect the incorporation of adenine into nucleotide and amino acids into proteins once these were transported into the cell, it is possible the daunomycin exerted these effects by acting directly on the cell membrane. Thus, one of the early toxic manifestations of anthracycline antibiotics may be on the transport of nutrients such as amino acids, glucose, and adenine.

Inhibition of overall protein and RNA synthesis as a mechanism for the tunicamycin induced decrease in cytochrome P-450 in rat hepatocytes

In rat hepatocytes maintained in culture, cytochrome P-450 and NADPH cytochrome c reductase activities were decreased by tunicamycin in a dose and time dependent fashion. The effect of tunicamycin was mainly due to inhibition of protein synthesis. Tunicamycin decreased L-[35S] methionine incorporation into many proteins, including a 52 kDa cytochrome P-450 isozyme. Tunicamycin also reduced RNA synthesis. These results indicate that tunicamycin decreased cytochrome P-450 levels in hepatocytes by inhibiting protein and RNA synthesis.

Structural requirements for inducing cardiotoxicity by anthracycline antibiotics: studies with neonatal rat cardiac myocytes in culture

Neonatal rat cardiac myocytes maintained in tissue culture were utilized to screen cardiotoxicity induced by a number of adriamycin and daunomycin analogs. Cell toxicity was assessed by leakage of cytoplasmic enzymes and was confirmed by electron microscopy. A number of modifications of structure of adriamycin and daunomycin markedly altered the incidence of toxicity caused by these drugs. Even though some of these structural alterations markedly altered lipid solubility or reactivity of quinone function, these changes did not always account for the differences in the toxicity induced by anthracycline analogs. The cardiomyocyte culture system used in this simple screening technique should be useful in the development of active anthracycline analog with least cardiotoxic potential.

Inhibition of protein synthesis: a basis for tunicamycin-induced decrease in rat liver cytochrome P-450

Tunicamycin caused a dose and time dependent decrease in cytochrome P-450 in rat liver. A dose of 50 micrograms/kg caused a decrease of about 50% in 72 hours. A similar decrease in the activities of rat liver microsomal aniline hydroxylase, aminopyrine N-demethylase and ethoxycoumarin O-deethylase were also seen after the tunicamycin treatment. Tunicamycin also suppressed food and water intake but the decrease in cytochrome P-450 was not related to these effects. NADPH cytochrome c reductase was not markedly decreased by tunicamycin. A decrease in cytochrome P-450 was also observed in cultured rat hepatocytes treated with tunicamycin. It decreased incorporation of [35S]-methionine into total proteins as well as into various cytochrome P-450 isozymes of rat hepatocytes. This indicates that a decrease in protein synthesis may be responsible for the tunicamycin-induced decrease in cytochrome P-450 and drug metabolism.

A simple and sensitive method for monitoring drug-induced cell injury in cultured cells

A simple, sensitive method has been developed for evaluating cell injury noninvasively in monolayer cells in culture. The cell ATP pool was radiolabeled by incubating the cells with [14C]adenine. The uptake and incorporation of [14C]adenine was shown to proportional to the number of cells. As determined by HPLC, about 65-70% of the incorporated 14C label was in the ATP pool, 15-20% was in the ADP pool, and the rest was in the 5'-AMP pool. When prelabeled cells were exposed to toxic drugs (acetaminophen, calcium ionophore A-23187, or daunomycin) there was a marked decrease in cell ATP with a concomitant increase in leakage of labeled nucleotides, mainly 5'-AMP and 5'IMP. We have shown that leakage of 14C label into the medium from the prelabeled cells may be employed for quantitation of cell injury. This new measure of toxicity was shown to correlate very well with LDH leakage from the cells, which is a well accepted measure of cell injury. The leakage of 5'-[14C]AMP also correlated very well with the reduction of cell ATP in cardiac myocytes. This method has been used for monitoring drug-induced toxicity in liver cells, cardiac myocytes, and LB cells.