1
|
Band alignment type I, II transformations in Hf 2CO 2/MoS 2 heterostructures using biaxial strain, external electric field, and interlayer coupling: a first principal investigation. Phys Chem Chem Phys 2023; 25:32062-32070. [PMID: 37982202 DOI: 10.1039/d3cp04546c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2023]
Abstract
The transition to neuromorphic devices is relevant to the development of materials capable of providing electronic switching in response to external stimuli. In the present work, the Hf2CO2/MoS2 heterostructure under biaxial strain, interlayer coupling, and an electric field was investigated by first-principles calculations based on density functional theory. We have shown that the influence of lateral deformation as well as the perpendicular external electric field is more significant compared to the influence of external vertical pressure on changes in the heterojunction type of heterostructure. The lateral stretching leads to a type-I and lateral compression results in a type-II heterojunction, and an external electric field also has an effect on heterojunction type. The combination of these impacts can tune the Hf2CO2/MoS2 heterostructure. The current work suggests a compelling way to make type-I and type-II heterostructure types consisting of Hf2CO2 and MoS2 monolayers for new nanodevices in fields like photonics, electronics, optoelectronic and neuromorphic applications.
Collapse
|
2
|
Phonon dynamics in MoSi 2N 4: insights from DFT calculations. Phys Chem Chem Phys 2023; 25:29831-29841. [PMID: 37888343 DOI: 10.1039/d3cp02921b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2023]
Abstract
We have reported the density functional theory investigations on the monolayered, 2 layered and bulk MoSi2N4 in three structural modifications called α1 [Y.-L. Hong, et al., Chemical Vapor Deposition of Layered Two-Dimensional MoSi2N4 Materials, Science, 2020, 369(6504), 670-674, DOI: 10.1126/science.abb7023], α2 and α3 [Y. Yin, Q. Gong, M. Yi and W. Guo, Emerging Versatile Two-Dimensional MoSi2N4 Family, Adv. Funct. Mater., 2023, 2214050, DOI: 10.1002/adfm.202214050]. We showed that in the case of monolayers the difference in total energies is less than 0.1 eV between α1 and α3 phases, and less than 0.2 eV between α1 and α2 geometries. The most energetically favorable layer stacking for the bulk structures of each phase was investigated. All considered modifications are dynamically stable from a single layer to a bulk structure in energetically favorable stacking. Raman spectra for the monolayered, 2 layered and bulk structures were simulated and the vibrational analysis was performed. The main difference in the obtained spectra is associated with the position of the strongest band which depends on the Mo-N bond length. According to the obtained data, we can conclude that the Raman line at 348 cm-1 in the experimental spectra of MoSi2N4 can have more complex explanation than just Γ-point Raman-active vibration as was discussed before in [Y.-L. Hong, et al., Chemical Vapor Deposition of Layered Two-Dimensional MoSi2N4 Materials, Science, 2020, 369(6504), 670-674, DOI: 10.1126/science.abb7023].
Collapse
|
3
|
X-ray and UV Irradiation-Induced Reactive Oxygen Species Mediated Antibacterial Activity in Fe and Pt Nanoparticle-Decorated Si-Doped TiCaCON Films. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37888937 DOI: 10.1021/acsami.3c13242] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/28/2023]
Abstract
Bone implants with biocompatibility and the ability to biomineralize and suppress infection are in high demand. The occurrence of early infections after implant placement often leads to repeated surgical treatment due to the ineffectiveness of antibiotic therapy. Therefore, an extremely attractive solution to this problem would be the ability to initiate bacterial protection of the implant by an external influence. Here, we present a proof-of-concept study based on the generation of reactive oxygen species (ROS) by the implant surface in response to X-ray irradiation, including through a layer of 3 mm adipose tissue, providing bactericidal protection. The effect of UV and X-ray irradiation of the implant surface on the ROS formation and the associated bactericidal activity was compared. The focus of our study was light-sensitive Si-doped TiCaCON films decorated with Fe and Pt nanoparticles (NPs) with photoinduced antibacterial activity mediated by ROS. In the visible and infrared range of 300-1600 nm, the films absorb more than 60% of the incident light. The high light absorption capacity of TiO2/TiC and TiO2/TiN heterostructures was demonstrated by density functional theory calculations. After short-term (5-10 s) low-dose X-ray irradiation, the films generated significantly more ROS than after UV illumination for 1 h. The Fe/TiCaCON-Si films showed enhanced biomineralization capacity, superior cytocompatibility, and excellent antibacterial activity against multidrug-resistant hospital Escherichia coli U20 and K261 strains and methicillin-resistant Staphylococcus aureus MW2 strain. Our study clearly demonstrates that oxidized Fe NPs are a promising alternative to the widely used Ag NPs in antibacterial coatings, and X-rays can potentially be used in ROS-regulating therapy to suppress inflammation in case of postimplant complications.
Collapse
|
4
|
Thermal and Electrical Properties of Additively Manufactured Polymer-Boron Nitride Composite. Polymers (Basel) 2023; 15:polym15051214. [PMID: 36904455 PMCID: PMC10007280 DOI: 10.3390/polym15051214] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2023] [Revised: 02/18/2023] [Accepted: 02/24/2023] [Indexed: 03/08/2023] Open
Abstract
The efficiency of electronic microchip-based devices increases with advancements in technology, while their size decreases. This miniaturization leads to significant overheating of various electronic components, such as power transistors, processors, and power diodes, leading to a reduction in their lifespan and reliability. To address this issue, researchers are exploring the use of materials that offer efficient heat dissipation. One promising material is a polymer-boron nitride composite. This paper focuses on 3D printing using digital light processing of a model of a composite radiator with different boron nitride fillings. The measured absolute values of the thermal conductivity of such a composite in the temperature range of 3-300 K strongly depend on the concentration of boron nitride. Filling the photopolymer with boron nitride leads to a change in the behavior of the volt-current curves, which may be associated with the occurrence of percolation currents during the deposition of boron nitride. The ab initio calculations show the behavior and spatial orientation of BN flakes under the influence of an external electric field at the atomic level. These results demonstrate the potential use of photopolymer-based composite materials filled with boron nitride, which are manufactured using additive techniques, in modern electronics.
Collapse
|
5
|
Halogen-Doped Chevrel Phase Janus Monolayers for Photocatalytic Water Splitting. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:368. [PMID: 36678120 PMCID: PMC9860981 DOI: 10.3390/nano13020368] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 01/10/2023] [Accepted: 01/11/2023] [Indexed: 06/17/2023]
Abstract
Chevrel non-van der Waals crystals are promising candidates for the fabrication of novel 2D materials due to their versatile crystal structure formed by covalently bonded (Mo6X8) clusters (X-chalcogen atom). Here, we present a comprehensive theoretical study of the stability and properties of Mo-based Janus 2D structures with Chevrel structures consisting of chalcogen and halogen atoms via density functional theory calculations. Based on the analysis performed, we determined that the S2Mo3I2 monolayer is the most promising structure for overall photocatalytic water-splitting application due to its appropriate band alignment and its ability to absorb visible light. The modulated Raman spectra for the representative structures can serve as a blueprint for future experimental verification of the proposed structures.
Collapse
|
6
|
Effect of h-BN Support on Photoluminescence of ZnO Nanoparticles: Experimental and Theoretical Insight. MATERIALS (BASEL, SWITZERLAND) 2022; 15:8759. [PMID: 36556566 PMCID: PMC9782558 DOI: 10.3390/ma15248759] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/10/2022] [Revised: 12/06/2022] [Accepted: 12/06/2022] [Indexed: 06/17/2023]
Abstract
Herein we report a simple and easily scalable method for fabricating ZnO/h-BN composites with tunable photoluminescence (PL) characteristics. The h-BN support significantly enhances the ultraviolet (UV) emission of ZnO nanoparticles (NPs), which is explained by the ZnO/h-BN interaction and the change in the electronic structure of the ZnO surface. When h-BN NPs are replaced with h-BN microparticles, the PL in the UV region increases, which is accompanied by a decrease in visible light emission. The dependence of the PL properties of ZnO NPs on the thickness of h-BN carriers, observed for the first time, is explained by a change in the dielectric constant of the support. A quantum chemical analysis of the influence of the h-BN thickness on the electron density redistribution at the wZnO/h-BN interface and on the optical properties of the wZnO/h-BN composites was carried out. Density functional theory (DFT) calculations show the appearance of hybridization at the h-BN/wZnO interface and an increase in the intensity of absorption peaks with an increase in the number of h-BN layers. The obtained results open new possibilities for controlling the properties of ZnO/h-BN heterostructures for various optical applications.
Collapse
|
7
|
A Novel Membrane-like 2D A'-MoS 2 as Anode for Lithium- and Sodium-Ion Batteries. MEMBRANES 2022; 12:1156. [PMID: 36422147 PMCID: PMC9693981 DOI: 10.3390/membranes12111156] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 11/09/2022] [Accepted: 11/14/2022] [Indexed: 06/16/2023]
Abstract
Currently, new nanomaterials for high-capacity lithium-ion batteries (LIBs) and sodium- ion batteries (SIBs) are urgently needed. Materials combining porous structure (such as representatives of metal-organic frameworks) and the ability to operate both with lithium and sodium (such as transition-metal dichalcogenides) are of particular interest. Our work reports the computational modelling of a new A'-MoS2 structure and its application in LIBs and SIBs. The A'-MoS2 monolayer was dynamically stable and exhibited semiconducting properties with an indirect band gap of 0.74 eV. A large surface area, together with the presence of pores resulted in a high capacity of the A'-MoS2 equal to ~391 mAg-1 at maximum filling for both Li and Na atoms. High adsorption energies and small values of diffusion barriers indicate that the A'-MoS2 is promising in the application of anode material in LIBs and SIBs.
Collapse
|
8
|
Raman Spectroscopy of Janus MoSSe Monolayer Polymorph Modifications Using Density Functional Theory. MATERIALS 2022; 15:ma15113988. [PMID: 35683283 PMCID: PMC9182135 DOI: 10.3390/ma15113988] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/06/2022] [Revised: 05/31/2022] [Accepted: 06/01/2022] [Indexed: 11/16/2022]
Abstract
Two-dimensional transition metal dichalcogenides (TMDs) with Janus structures are attracting increasing attention due to their emerging superior properties in breaking vertical mirror symmetry when compared to conventional TMDs, which can be beneficial in fields such as piezoelectricity and photocatalysis. The structural investigations of such materials, along with other 2D materials, can be successfully carried out using the Raman spectroscopy method. One of the key elements in such research is the theoretical spectrum, which may assist in the interpretation of experimental data. In this work, the simulated Raman spectrum of 1H-MoSSe and the predicted Raman spectra for 1T, 1T', and 1H' polymorph modifications of MoSSe monolayers were characterized in detail with DFT calculations. The interpretation of spectral profiles was made based on the analysis of the lattice dynamics and partial phonon density of states. The presented theoretical data open the possibility of an accurate study of MoSSe polymorphs, including the control of the synthesized material quality and the characterization of samples containing a mixture of polymorphs.
Collapse
|
9
|
Computational Design of Gas Sensors Based on V 3S 4 Monolayer. NANOMATERIALS 2022; 12:nano12050774. [PMID: 35269262 PMCID: PMC8912300 DOI: 10.3390/nano12050774] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/02/2022] [Revised: 02/17/2022] [Accepted: 02/22/2022] [Indexed: 02/04/2023]
Abstract
Novel magnetic gas sensors are characterized by extremely high efficiency and low energy consumption, therefore, a search for a two-dimensional material suitable for room temperature magnetic gas sensors is a critical task for modern materials scientists. Here, we computationally discovered a novel ultrathin two-dimensional antiferromagnet V3S4, which, in addition to stability and remarkable electronic properties, demonstrates a great potential to be applied in magnetic gas sensing devices. Quantum-mechanical calculations within the DFT + U approach show the antiferromagnetic ground state of V3S4, which exhibits semiconducting electronic properties with a band gap of 0.36 eV. A study of electronic and magnetic response to the adsorption of various gas agents showed pronounced changes in properties with respect to the adsorption of NH3, NO2, O2, and NO molecules on the surface. The calculated energies of adsorption of these molecules were −1.25, −0.91, −0.59, and −0.93 eV, respectively. Obtained results showed the prospective for V3S4 to be used as effective sensing materials to detect NO2 and NO, for their capture, and for catalytic applications in which it is required to lower the dissociation energy of O2, for example, in oxygen reduction reactions. The sensing and reducing of NO2 and NO have great importance for improving environmental protection and sustainable development.
Collapse
|
10
|
Tunable Single-Atomic Charges on a Cleaved Intercalated Transition Metal Dichalcogenide. NANO LETTERS 2022; 22:1812-1817. [PMID: 34890208 DOI: 10.1021/acs.nanolett.1c03706] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Control of a single ionic charge state by altering the number of bound electrons has been considered as an ultimate testbed for atomic charge-induced interactions and manipulations, and such subject has been studied in artificially deposited objects on thin insulating layers. We demonstrate that an entire layer of controllable atomic charges on a periodic lattice can be obtained by cleaving metallic Co1/3NbS2, an intercalated transition metal dichalcogenide. We identified a metastable charge state of Co with a different valence and manipulated atomic charges to form a linear chain of the metastable charge state. Density functional theory investigation reveals that the charge state is stable due to a modified crystal field at the surface despite the coupling between NbS2 and Co via a1g orbitals. The idea can be generalized to other combinations of intercalants and base matrices, suggesting that they can be a new platform to explore single-atom-operational 2D electronics/spintronics.
Collapse
|
11
|
Electrospun Biodegradable Nanofibers Coated Homogenously by Cu Magnetron Sputtering Exhibit Fast Ion Release. Computational and Experimental Study. MEMBRANES 2021; 11:965. [PMID: 34940466 PMCID: PMC8708309 DOI: 10.3390/membranes11120965] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/17/2021] [Revised: 12/03/2021] [Accepted: 12/04/2021] [Indexed: 11/30/2022]
Abstract
Copper-coated nanofibrous materials are desirable for catalysis, electrochemistry, sensing, and biomedical use. The preparation of copper or copper-coated nanofibers can be pretty challenging, requiring many chemical steps that we eliminated in our robust approach, where for the first time, Cu was deposited by magnetron sputtering onto temperature-sensitive polymer nanofibers. For the first time, the large-scale modeling of PCL films irradiation by molecular dynamics simulation was performed and allowed to predict the ions penetration depth and tune the deposition conditions. The Cu-coated polycaprolactone (PCL) nanofibers were thoroughly characterized and tested as antibacterial agents for various Gram-positive and Gram-negative bacteria. Fast release of Cu2+ ions (concentration up to 3.4 µg/mL) led to significant suppression of E. coli and S. aureus colonies but was insufficient against S. typhimurium and Ps. aeruginosa. The effect of Cu layer oxidation upon contact with liquid media was investigated by X-ray photoelectron spectroscopy revealing that, after two hours, 55% of Cu atoms are in form of CuO or Cu(OH)2. The Cu-coated nanofibers will be great candidates for wound dressings thanks to an interesting synergistic effect: on the one hand, the rapid release of copper ions kills bacteria, while on the other hand, it stimulates the regeneration with the activation of immune cells. Indeed, copper ions are necessary for the bacteriostatic action of cells of the immune system. The reactive CO2/C2H4 plasma polymers deposited onto PCL-Cu nanofibers can be applied to grafting of viable proteins, peptides, or drugs, and it further explores the versatility of developed nanofibers for biomedical applications use.
Collapse
|
12
|
Novel two-dimensional boron oxynitride predicted using the USPEX evolutionary algorithm. Phys Chem Chem Phys 2021; 23:26178-26184. [PMID: 34807199 DOI: 10.1039/d1cp03754d] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
Oxidation is a unique process that significantly changes the structure and properties of a material. Doping of h-BN by oxygen is a hot topic in material science leading to the possibility of synthesis of novel 2D structures with customized electronic properties. It is still unclear how the atomic structure changes in the presence of external atoms during the oxidation of h-BN. We predict novel two-dimensional (2D) arrangements of boron oxynitride using the evolutionary algorithm of crystal structure prediction USPEX. All considered structures demonstrate semiconducting properties with a reduced bandgap compared with h-BN. Both molecular dynamics and phonon calculations show the dynamical stability of the new 2D B5N3O2 phase, and our calculations demonstrate that it can form a bulk layered structure with an interlayer distance larger than that of pure h-BN. The optical characterization shows a redshift of the absorption spectrum compared with pure h-BN. Incorporation of oxygen into the structure of 2D BN during synthesis or oxidation can dramatically change the covalent network of h-BN while preserving its two-dimensionality and flatness, following the presence of local dipole moments which could improve the piezoelectric properties.
Collapse
|
13
|
Induced spin polarization in graphene via interactions with halogen doped MoS 2 and MoSe 2 monolayers by DFT calculations. NANOSCALE 2020; 12:23248-23258. [PMID: 33206100 DOI: 10.1039/d0nr06287a] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Magnetic halogen doped MoX2 (X = S and Se) monolayers influenced the electronic structure of graphene through a proximity effect. This process was observed using state-of-the-art calculations. It was found that the substitution of a single chalcogen atom with a halogen atom (F, Cl, Br, and I) results in n-type doping of MoX2. An additional electron from the dopant is localized on binding orbitals with the nearest Mo atoms and leads to the formation of magnetism in the dichalcogenide layer. Detailed analysis of halogen doped MoX2/graphene heterostructures demonstrated the induction of spin polarization in graphene near the Fermi energy. Significant spin polarization near the Fermi energy and n-type doping were observed in the graphene layer of MoSe2/graphene heterostructures with MoSe2 doped with iodine. At the same time, fluorine-doped MoSe2 does not cause n-doping in graphene, while spin polarization still takes place. The possibility for the detection of the arrangement of the halogen impurities at the MoX2 basal plane even with the graphene layer deposited on top was demonstrated through STM measurements which will be undoubtedly useful for the fabrication of electronic schemes and elements based on the proposed heterostructures for their further application in nanoelectronics and spintronics.
Collapse
|
14
|
Stability and gas sensing properties of Ta 2X 3M 8 (X = Pd, Pt; M = S, Se) nanoribbons: a first-principles investigation. Phys Chem Chem Phys 2020; 22:14651-14659. [PMID: 32573623 DOI: 10.1039/d0cp01545h] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
One dimensional Ta2(Pd/Pt)3(S/Se)8 nanoribbons (TPS-NR) are considered as a promising material in nanoelectronics due to their intrinsic semiconducting electronic properties. In this article, we study the stability of TPS-NR by considering their oxidation process. Our calculations showed that the Ta2(Pd/Pt)3Se8 nanoribbons are more environmentally stable than Ta2(Pd/Pt)3S8-NR. We studied the thermodynamics of the formation of monovacancies and their impact on the electronic properties of TPS-NR. Additionally, the sensing properties of environmentally stable Ta2Pd3Se8 nanoribbons were investigated. The observed changes of the electronic structure and transport properties after the adsorption of CO, NH3 and NO2 molecules reveal the mechanisms of possible application of Ta2Pd3Se8 nanoribbons as a gas sensor. The electronic transport properties of the nanoribbons exhibit a notable response to the presence of gas molecules.
Collapse
|
15
|
Abstract
NaCl is one of the simplest compounds and was thought to be well-understood, and yet, unexpected complexities related to it were uncovered at high pressure and in low-dimensional states. Here, exotic hexagonal NaCl thin films on the (110) diamond surface were crystallized in the experiment following a theoretical prediction based on ab initio evolutionary algorithm USPEX. State-of-the-art calculations and experiments showed the existence of a hexagonal NaCl thin film, which is due to the strong chemical interaction of the NaCl film with the diamond substrate.
Collapse
|
16
|
Non-chemical fluorination of hexagonal boron nitride by high-energy ion irradiation. NANOTECHNOLOGY 2020; 31:125705. [PMID: 31770728 DOI: 10.1088/1361-6528/ab5bcc] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Two-dimensional materials such as hexagonal boron nitride (h-BN) and graphene have attracted wide attention in nanoelectronics and spintronics. Since their electronic characteristics are strongly affected by the local atomic structure, the heteroatom doping could allow us to tailor the electronic and physical properties of two-dimensional materials. In this study, a non-chemical method of heteroatom doping into h-BN under high-energy ion irradiation was demonstrated for the LiF/h-BN/Cu heterostructure. Spectroscopic analysis of chemical states on the relevant atoms revealed that 6% ± 2% fluorinated h-BN is obtained by the irradiation of 2.4 MeV Cu2+ ions with the fluence up to 1014 ions cm-2. It was shown that the high-energy ion irradiation leads to a single-sided fluorination of h-BN by the formation of the fluorinated sp 3-hybridized BN.
Collapse
|
17
|
Polyol Synthesis of Ag/BN Nanohybrids and their Catalytic Stability in CO Oxidation Reaction. ChemCatChem 2020. [DOI: 10.1002/cctc.201902257] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
18
|
Graphene/Half-Metallic Heusler Alloy: A Novel Heterostructure toward High-Performance Graphene Spintronic Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1905734. [PMID: 31793057 DOI: 10.1002/adma.201905734] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2019] [Revised: 10/04/2019] [Indexed: 06/10/2023]
Abstract
Graphene-based vertical spin valves (SVs) are expected to offer a large magnetoresistance effect without impairing the electrical conductivity, which can pave the way for the next generation of high-speed and low-power-consumption storage and memory technologies. However, the graphene-based vertical SV has failed to prove its competence due to the lack of a graphene/ferromagnet heterostructure, which can provide highly efficient spin transport. Herein, the synthesis and spin-dependent electronic properties of a novel heterostructure consisting of single-layer graphene (SLG) and a half-metallic Co2 Fe(Ge0.5 Ga0.5 ) (CFGG) Heusler alloy ferromagnet are reported. The growth of high-quality SLG with complete coverage by ultrahigh-vacuum chemical vapor deposition on a magnetron-sputtered single-crystalline CFGG thin film is demonstrated. The quasi-free-standing nature of SLG and robust magnetism of CFGG at the SLG/CFGG interface are revealed through depth-resolved X-ray magnetic circular dichroism spectroscopy. Density functional theory (DFT) calculation results indicate that the inherent electronic properties of SLG and CFGG such as the linear Dirac band and half-metallic band structure are preserved in the vicinity of the interface. These exciting findings suggest that the SLG/CFGG heterostructure possesses distinctive advantages over other reported graphene/ferromagnet heterostructures, for realizing effective transport of highly spin-polarized electrons in graphene-based vertical SV and other advanced spintronic devices.
Collapse
|
19
|
Abstract
Single-walled carbon nanotubes (SWCNTs) possess extraordinary physical and chemical properties. Thin films of randomly oriented SWCNTs have great potential in many opto-electro-mechanical applications. However, good adhesion of SWCNT films with a substrate material is pivotal for their practical use. Here, for the first time, we systematically investigate the adhesion properties of SWCNT thin films with commonly used substrates such as glass (SiO2), indium tin oxide (ITO), crystalline silicon (C-Si), amorphous silicon (a-Si:H), zirconium oxide (ZrO2), platinum (Pt), polydimethylsiloxane (PDMS), and SWCNTs for self-adhesion using atomic force microscopy. By comparing the results obtained in air and inert Ar atmospheres, we observed that the surface state of the materials greatly contributes to their adhesion properties. We found that the SWCNT thin films have stronger adhesion in an inert atmosphere. The adhesion in the air can be greatly improved by a fluorination process. Experimental and theoretical analyses suggest that adhesion depends on the atmospheric conditions and surface functionalization.
Collapse
|
20
|
Nonstoichiometric Phases of Two-Dimensional Transition-Metal Dichalcogenides: From Chalcogen Vacancies to Pure Metal Membranes. J Phys Chem Lett 2019; 10:6492-6498. [PMID: 31589053 DOI: 10.1021/acs.jpclett.9b02529] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Two-dimensional (2D) membranes consisting of a single layer of Mo atoms were recently manufactured [ Adv. Mater. 2018 , 30 , 1707281 ] from MoSe2 sheets by sputtering Se atoms using an electron beam in a transmission electron microscope. This is an unexpected result as formation of Mo clusters should energetically be more favorable. To get microscopic insights into the energetics of realistic Mo membranes and nonstoichiometric phases of transition-metal dichalcogenides (TMDs) MaXb, where M = Mo and W and X = S, Se, and Te, we carry out first-principles calculations and demonstrate that the membranes, which can be referred to as metallic quantum dots embedded into a semiconducting matrix, can be stabilized by charge transfer. We also show that an ideal neutral 2D Mo or W sheet is not flat but a corrugated structure, with a square lattice being the lowest-energy configuration. We further demonstrate that several intermediate nonstoichiometric phases of TMDs are possible as they have lower formation energies than pure metal membranes. Among them, the orthorhombic metallic 2D M4X4 phase is particularly stable. Finally, we study the properties of this phase in detail and discuss how it can be manufactured by the top-down approaches.
Collapse
|
21
|
TiCaPCON-Supported Pt- and Fe-Based Nanoparticles and Related Antibacterial Activity. ACS APPLIED MATERIALS & INTERFACES 2019; 11:28699-28719. [PMID: 31339695 DOI: 10.1021/acsami.9b09649] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
A rapid increase in the number of antibiotic-resistant bacteria urgently requires the development of new more effective yet safe materials to fight infection. Herein, we uncovered the contribution of different metal nanoparticles (NPs) (Pt, Fe, and their combination) homogeneously distributed over the surface of nanostructured TiCaPCON films in the total antibacterial activity toward eight types of clinically isolated bacterial strains (Escherichia coli K261, Klebsiella pneumoniae B1079k/17-3, Acinetobacter baumannii B1280A/17, Staphylococcus aureus no. 839, Staphylococcus epidermidis i5189-1, Enterococcus faecium Ya-235: VanA, E. faecium I-237: VanA, and E. coli U20) taking into account various factors that can affect bacterial mechanisms: surface chemistry and phase composition, wettability, ion release, generation of reactive oxygen species (ROS), potential difference and polarity change between NPs and the surrounding matrix, formation of microgalvanic couples on the sample surfaces, and contribution of a passive oxide layer, formed on the surface of films, to general kinetics of the NP dissolution. The results indicated that metal ion implantation and subsequent annealing significantly changed the chemistry of the TiCaPCON film surface. This, in turn, greatly affected the shedding of ions, ROS formation, potential difference between film components, and antibacterial activity. The presence of NPs was critical for ROS generation under UV or daylight irradiation. By eliminating the potential contribution of ions and ROS, we have shown that bacteria can be killed using direct microgalvanic interactions. The possibility of charge redistribution at the interfaces between Pt NPs and TiO2 (anatase and rutile), TiC, TiN, and TiCN components was demonstrated using density functional theory calculations. The TiCaPCON-supported Pt and Fe NPs were not toxic for lymphocytes and had no effect on the ability of lymphocytes to activate in response to a mitogen. This study provides new insights into understanding and designing of antibacterial yet biologically safe surfaces.
Collapse
|
22
|
Transition Metal Chalcogenide Single Layers as an Active Platform for Single-Atom Catalysis. ACS ENERGY LETTERS 2019; 4:1947-1953. [PMID: 31763462 PMCID: PMC6866691 DOI: 10.1021/acsenergylett.9b01097] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2019] [Accepted: 07/09/2019] [Indexed: 05/31/2023]
Abstract
Among the main appeals of single-atom catalysts are the ultimate efficiency of material utilization and the well-defined nature of the active sites, holding the promise of rational catalyst design. A major challenge is the stable decoration of various substrates with a high density of individually dispersed and uniformly active monatomic sites. Transition metal chalcogenides (TMCs) are broadly investigated catalysts, limited by the relative inertness of their pristine basal plane. We propose that TMC single layers modified by substitutional heteroatoms can harvest the synergistic benefits of stably anchored single-atom catalysts and activated TMC basal planes. These solid-solution TMC catalysts offer advantages such as simple and versatile synthesis, unmatched active site density, and a stable and well-defined single-atom active site chemical environment. The unique features of heteroatom-doped two-dimensional TMC crystals at the origin of their catalytic activity are discussed through the examples of various TMC single layers doped with individual oxygen heteroatoms.
Collapse
|
23
|
Structural evolution of Ag/BN hybrids via a polyol-assisted fabrication process and their catalytic activity in CO oxidation. Catal Sci Technol 2019. [DOI: 10.1039/c9cy01464k] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Enhanced catalytic activity of Ag/BN nanohybrids is ascribed to the formation of a thin intermediate Ag–O–B layer.
Collapse
|
24
|
Synthetic routes, structure and catalytic activity of Ag/BN nanoparticle hybrids toward CO oxidation reaction. J Catal 2018. [DOI: 10.1016/j.jcat.2018.10.016] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
25
|
Holey single-walled carbon nanotubes for ultra-fast broadband bolometers. NANOSCALE 2018; 10:18665-18671. [PMID: 30265270 DOI: 10.1039/c8nr05925j] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Although carbon nanotubes have already been demonstrated to be a promising material for bolometric photodetectors, enhancing sensitivity while maintaining the speed of operation remains a great challenge. Here, we present a holey carbon nanotube network, designed to improve the temperature coefficient of resistance for highly sensitive ultra-fast broadband bolometers. Treatment of carbon nanotube films with low-frequency oxygen plasma allows fine tuning of the electronic properties of the material. The temperature coefficient of resistance of our films is much greater than the reported values for pristine carbon nanotubes, up to -2.8% K-1 at liquid nitrogen temperature. The bolometer prototypes made from the treated films demonstrate high sensitivity over a wide IR range, a short response time, smooth spectral characteristics and a low noise level.
Collapse
|
26
|
Temperature induced twinning in aragonite: transmission electron microscopy experiments and ab initio calculations. Z KRIST-CRYST MATER 2018. [DOI: 10.1515/zkri-2018-2109] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
The microstructure of aragonite, one of the main bio-mineral and component of bio-inspired materials, was described in numerous investigations. Using transmission electron microscopy (TEM), for the first time we show the effect of temperature on aragonite microstructure. The local increase of (0.5 0.5 0) reflections intensities and appearance of satellite reflections in [11̅0] zone axis were observed above 350°C. We explain the appearance of satellite reflections by the generation and ordering of {110} twin boundaries and suggest new thermal mechanism of the twin boundaries generation. We check the viability of this mechanism by ab initio molecular dynamics (AIMD) simulations and generalized solid state nudge elastic band (g-SSNEB) calculations.
Collapse
|
27
|
Photocatalysis with Pt-Au-ZnO and Au-ZnO Hybrids: Effect of Charge Accumulation and Discharge Properties of Metal Nanoparticles. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2018; 34:7334-7345. [PMID: 29809011 DOI: 10.1021/acs.langmuir.8b00401] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
Metal-semiconductor hybrid nanomaterials are becoming increasingly popular for photocatalytic degradation of organic pollutants. Herein, a seed-assisted photodeposition approach is put forward for the site-specific growth of Pt on Au-ZnO particles (Pt-Au-ZnO). A similar approach was also utilized to enlarge the Au nanoparticles at epitaxial Au-ZnO particles (Au@Au-ZnO). An epitaxial connection at the Au-ZnO interface was found to be critical for the site-specific deposition of Pt or Au. Light on-off photocatalysis tests, utilizing a thiazine dye (toluidine blue) as a model organic compound, were conducted and confirmed the superior photodegradation properties of Pt-Au-ZnO hybrids compared to Au-ZnO. In contrast, Au-ZnO type hybrids were more effective toward photoreduction of toluidine blue to leuco-toluidine blue. It was deemed that photoexcited electrons of Au-ZnO (Au, ∼5 nm) possessed high reducing power owing to electron accumulation and negative shift in Fermi level/redox potential; however, exciton recombination due to possible Fermi-level equilibration slowed down the complete degradation of toluidine blue. In the case of Au@Au-ZnO (Au, ∼15 nm), the photodegradation efficiency was enhanced and the photoreduction rate reduced compared to Au-ZnO. Pt-Au-ZnO hybrids showed better photodegradation and mineralization properties compared to both Au-ZnO and Au@Au-ZnO owing to a fast electron discharge (i.e. better electron-hole seperation). However, photoexcited electrons lacked the reducing power for the photoreduction of toluidine blue. The ultimate photodegradation efficiencies of Pt-Au-ZnO, Au@Au-ZnO, and Au-ZnO were 84, 66, and 39%, respectively. In the interest of effective metal-semiconductor type photocatalysts, the present study points out the importance of choosing the right metal, depending on whether a photoreduction and/or photodegradation process is desired.
Collapse
|
28
|
Construction of Polarized Carbon-Nickel Catalytic Surfaces for Potent, Durable, and Economic Hydrogen Evolution Reactions. ACS NANO 2018; 12:4148-4155. [PMID: 29557645 DOI: 10.1021/acsnano.7b08724] [Citation(s) in RCA: 52] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Electrocatalytic hydrogen evolution reaction (HER) in alkaline solution is hindered by its sluggish kinetics toward water dissociation. Nickel-based catalysts, as low-cost and effective candidates, show great potentials to replace platinum (Pt)-based materials in the alkaline media. The main challenge regarding this type of catalysts is their relatively poor durability. In this work, we conceive and construct a charge-polarized carbon layer derived from carbon quantum dots (CQDs) on Ni3N nanostructure (Ni3N@CQDs) surfaces, which simultaneously exhibit durable and enhanced catalytic activity. The Ni3N@CQDs shows an overpotential of 69 mV at a current density of 10 mA cm-2 in a 1 M KOH aqueous solution, lower than that of Pt electrode (116 mV) at the same conditions. Density functional theory (DFT) simulations reveal that Ni3N and interfacial oxygen polarize charge distributions between originally equal C-C bonds in CQDs. The partially negatively charged C sites become effective catalytic centers for the key water dissociation step via the formation of new C-H bond (Volmer step) and thus boost the HER activity. Furthermore, the coated carbon is also found to protect interior Ni3N from oxidization/hydroxylation and therefore guarantees its durability. This work provides a practical design of robust and durable HER electrocatalysts based on nonprecious metals.
Collapse
|
29
|
Compressive properties of hollow BN nanoparticles: theoretical modeling and testing using a high-resolution transmission electron microscope. NANOSCALE 2018; 10:8099-8105. [PMID: 29671456 DOI: 10.1039/c8nr00857d] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Due to their excellent mechanical properties, nanoparticles have great potential as reinforcing phases in composite materials, friction modifiers in liquid lubricants, catalysts and drug-delivery agents. In the present study, the mechanical analysis of individual spherical hollow BN nanoparticles (BNNPs) using a combination of in situ compression tests inside a high-resolution transmission electron microscope (TEM) and theoretical modelling was conducted. It was found that BNNPs display high mechanical stiffness and a large value of elastic recovery. This enables the hollow BNNPs to exhibit considerably large cyclic deformation (up to 30% of the sphere's original external diameter) and to accumulate plastic deformation of approximately 30% of the total compression strain. Theoretical simulations allowed for elucidation of BNNPs' structural changes under compression at the atomic level and explained the origin of their high stiffness and large critical deformation values.
Collapse
|
30
|
Abstract
BNNPs/Ag nanohybrids with an optimal amount of B2O3 demonstrated a higher catalytic activity.
Collapse
|
31
|
Multifunctional Superelastic Foam-Like Boron Nitride Nanotubular Cellular-Network Architectures. ACS NANO 2017; 11:558-568. [PMID: 27959509 DOI: 10.1021/acsnano.6b06601] [Citation(s) in RCA: 24] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/24/2023]
Abstract
Construction of cellular architectures has been expected to enhance materials' mechanical tolerance and to stimulate and broaden their efficient utilizations in many potential fields. However, hitherto, there have been rather scarce developments in boron nitride (BN)-type cellular architectures because of well-known difficulties in the syntheses of BN-based structures. Herein, cellular-network multifunctional foams made of interconnective nanotubular hexagonal BN (h-BN) architectures are developed using carbothermal reduction-assisted in situ chemical vapor deposition conversion from N-doped tubular graphitic cellular foams. These ultralight, chemically inert, thermally stable, and robust-integrity (supporting about 25,000 times of their own weight) three-dimensional-BN foams exhibit a 98.5% porosity, remarkable shape recovery (even after cycling compressions with 90% deformations), excellent resistance to water intrusion, thermal diffusion stability, and high strength and stiffness. They remarkably reduce the coefficient of thermal expansion and dielectric constant of polymeric poly(methyl methacrylate) composites, greatly contribute to their thermal conductivity improvement, and effectively limit polymeric composite softening at elevated temperatures. The foams also demonstrate high-capacity adsorption-separation and removal ability for a wide range of oils and organic chemicals in oil/water systems and reliable recovery under their cycling usage as organic adsorbers. These created multifunctional foams should be valuable in many high-end practical applications.
Collapse
|
32
|
Structural trend of alkaline carbonates under high pressure. Acta Crystallogr A Found Adv 2016. [DOI: 10.1107/s2053273316098910] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022] Open
|
33
|
Proximity-Induced Spin Polarization of Graphene in Contact with Half-Metallic Manganite. ACS NANO 2016; 10:7532-7541. [PMID: 27438899 DOI: 10.1021/acsnano.6b02424] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
The role of proximity contact with magnetic oxides is of particular interest from the expectations of the induced spin polarization and weak interactions at the graphene/magnetic oxide interfaces, which would allow us to achieve efficient spin-polarized injection in graphene-based spintronic devices. A combined approach of topmost-surface-sensitive spectroscopy utilizing spin-polarized metastable He atoms and ab initio calculations provides us direct evidence for the magnetic proximity effect in the junctions of single-layer graphene and half-metallic manganite La0.7Sr0.3MnO3 (LSMO). It is successfully demonstrated that in the graphene/LSMO junctions a sizable spin polarization is induced at the Fermi level of graphene in parallel to the spin polarization direction of LSMO without giving rise to a significant modification in the π band structure.
Collapse
|
34
|
Abstract
On the basis of an unbiased structure prediction, it is shown that the stable form of NiSi under pressures of 100 and 200 GPa is thePmmnstructure. Furthermore, a new stable phase has been discovered: the deformed tetragonal CsCl-type structure witha= 2.174 Å andc= 2.69 Å at 400 GPa. Specifically, the sequence of high-pressure phase transitions is the following: thePmmnstructure below 213 GPa, the tetragonal CsCl type in the range 213–522 GPa, and cubic CsCl higher than 522 GPa. As the CsCl-type structure is considered as the model structure of the FeSi compound at the conditions of the Earth's core, this result implies restrictions on the Fe–Ni isomorphic miscibility in FeSi.
Collapse
|
35
|
[Cytogenetic action of accelerated carbon and boron ions on corneal epithelial cells in mice]. RADIOBIOLOGIIA 1971; 11:835-40. [PMID: 5139617] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 01/14/2023]
|