Study on the adsorption of Zn(II) and Cu(II) in acid mine drainage by fly ash loaded nano-FeS

Aiming at the acid mine drainage (AMD) in zinc, copper and other heavy metals treatment difficulties, severe pollution of soil and water environment and other problems. Through the ultrasonic precipitation method, this study prepared fly ash-loaded nano-FeS composites (nFeS-F). The effects of nFeS-F dosage, pH, stirring rate, reaction time and initial concentration of the solution on the adsorption of Zn(II) and Cu(II) were investigated. The data were fitted by Lagergren first and second-order kinetic equations, Internal diffusion equation, Langmuir and Freundlich isotherm models, and combined with SEM, TEM, FTIR, TGA, and XPS assays to reveal the mechanism of nFeS-F adsorption of Zn(II) and Cu(II). The results demonstrated that: The removal of Zn(II) and Cu(II) by nFeS-F could reach 83.36% and 70.40%, respectively (The dosage was 8 g/L, pH was 4, time was 150 min, and concentration was 100 mg/L). The adsorption process, mainly chemical adsorption, conforms to the Lagergren second-order kinetic equation (R2 = 0.9952 and 0.9932). The adsorption isotherms have a higher fitting degree with the Langmuir model (R2 = 0.9964 and 0.9966), and the adsorption is a monolayer adsorption process. This study can provide a reference for treating heavy metals in acid mine drainage and resource utilization of fly ash.

Phenotypic characterization and genomic analysis of Limosilactobacillus fermentum phage

Limosilactobacillus (L.) fermentum is widely utilized for its beneficial properties, but lysogenic phages can integrate into its genome and can be induced to enter the lysis cycle under certain conditions, thus accomplishing lysis of host cells, resulting in severe economic losses. In this study, a lysogenic phage, LFP03, was induced from L. fermentum IMAU 32510 by UV irradiation for 70 s. The electron microscopy showed that this phage belonged to Caudoviricetes class. Its genome size was 39,556 bp with a GC content of 46.08%, which includes 20 functional proteins. Compared with other L. fermentum phages, the genome of phage LFP03 exhibited deletions, inversions and translocations. Biological analysis showed that its optimal multiplicity of infection was 0.1, with a burst size of 133.5 ± 4.9 PFU/infective cell. Phage LFP03 was sensitive to temperature and pH value, with a survival rate of 48.98% at 50 °C. It could be completely inactivated under pH 2. The adsorption ability of this phage was minimally affected by temperature and pH value, with adsorption rates reaching 80% under all treated conditions. Divalent cations could accelerate phage adsorption, while chloramphenicol expressed little influence. This study might expand the related knowledge of L. fermentum phages, and provide some theoretical basis for improving the stability of related products and establishing phage control measures.

Adsorption and desorption characteristics of flavonoids from white tea using macroporous adsorption resin

White tea contains the highest flavonoids compared to other teas. While there have been numerous studies on the components of different tea varieties, research explicitly focusing on the flavonoid content of white tea remains scarce, making the need for a good flavonoid purification process for white tea even more important. This study compared the adsorption and desorption performance of five types of macroporous resins: D101, HP20, HPD500, DM301, and AB-8. Among the tested resins, AB-8 was selected based on its best adsorption and desorption performance to investigate the static adsorption kinetics and dynamic adsorption-desorption purification of white tea flavonoids. The optimal purification process was determined: adsorption temperature 25 °C, crude tea flavonoid extract pH 3, ethanol concentration 80 %, sample loading flow rate and eluent flow rate 1.5 BV/min, and eluent dosage 40 BV. The results indicated that the adsorption process followed pseudo-second-order kinetics. Under the above purification conditions, the purity of the total flavonoids in the purified white tea flavonoid increased from approximately 17.69 to 46.23 %, achieving a 2.61-fold improvement, indicating good purification results. The purified white tea flavonoid can be further used for nutraceutical and pharmaceutical applications.

Rhizosphere environmental factors regulated the cadmium adsorption by vermicompost: Influence of pH and low-molecular-weight organic acids

Vermicompost is a promising amendment for immobilization of cadmium (Cd) in soils; however, its effectiveness can be influenced by rhizosphere environment conditions, such as pH and the presence of low-molecular-weight organic acids (LMWOAs). In this study, a batch experiment was conducted to examine the characteristics of Cd adsorption by vermicompost at different pH (pH = 3, 5, and 7) and after the addition of different LMWOAs (oxalic acid; citric acid; malic acid). Furthermore, a series of morphology and structural analyses were conducted to elucidate the mechanisms of observed effects. The results showed that the adsorption capacity of vermicompost for Cd increased as pH increased, and chemisorption dominated the adsorption process. Changes in pH altered adsorption performance by affecting the -OH groups of alcohol/phenol and the -CH2 groups of aliphatics. Further, the addition of oxalic acid promoted Cd adsorption, and the effect was concentration dependent. Modifying the verimicompost surface with more adsorption sites might be the main reason. Conversely, citric acid and malic acid showed the ability to inhibit Cd adsorption by vermicompost. Citric acid caused a blocking effect by covering flocculent substances on the vermicompost surface while reducing surface adsorption sites by dissolving mineral components such as iron oxides. However, the action of malic acid did not appear to be related to changes in morphology or the structure of vermicompost. Overall, the results of this study partially explain the limited effectiveness of Cd immobilization within the rhizosphere by vermicompost, and provide theoretical support for regulating rhizosphere environments to improve the effectiveness of vermicompost immobilization of Cd.

Adsorption characteristics of sulfonamide antibiotic molecules on carbon nanotube and the effects of environment

CONTEXT

In this paper, the adsorption characteristics of five sulfonamide antibiotic molecules on carbon nanotubes were investigated using density functional theory (DFT) calculations. The adsorption configurations of different adsorption sites were optimized, and the most stable adsorption configuration of each sulfonamide molecule was determined by adsorption energy comparison, and the relative adsorption stability of five sulfonamide molecules on carbon nanotubes was determined by comparing their adsorption energies, i.e., sulfamethazine > sulfadiazine > sulfamerazine > sulfamethoxazole > sulfanilamide. The electron densities of the adsorption configurations were then calculated to confirm that the adsorption of five sulfonamide drug molecules on carbon nanotubes should be physical adsorption. Moreover, the adsorption energy of five sulfonamide molecules on carbon nanotubes in the aqueous environment was larger than that in the vacuum even though the adsorption process remain to be physical adsorption. The adsorption characteristics of the five sulfonamide molecules in various acid-base environments were finally investigated. In contrast, the adsorption energies of the five drug molecules in acid-base environments were significantly reduced, indicating that carbon nanotubes may need to have a suitable pH range to achieve the optimal adsorption effect when they are used for the treatment of sulfonamide antibiotics.

METHODS

In this paper, we use density functional theory (DFT) with PBE functional to study the adsorption properties of five sulfonamides on carbon nanotubes. The structural optimization and the calculation of electronic structural properties are carried out by CP2K package (version 7.1), adopting the DZVP-MOLOPT-SR-GTH basis set and Goedeck-Teter-Hutter (GTH) pseudo potential. Grimme's D3 correction is used to during all the calculations to correctly capture the influence of the van der Waals interactions.

Phosphorus fractions and iron oxides responsible for the variations in the Cd retention capacity in tropical soil aggregates under different cropping patterns

The environmental behavior of Cd in soil has been widely studied because of its close relationship with food security and soil environmental pollution. In this study, the roles of P fractions and Fe oxides in the retention of Cd in typical tropical soil from five cropping patterns were investigated. Although there was no evident relationship between the Cd adsorption capacity and soil aggregate particle sizes, strong spatial associations of P, Fe, and Cd at the soil aggregates were observed via energy dispersive spectroscopy analysis. Among five cropping patterns, citrus plantations exhibited highest ratios (calculated by pixel area) of P overlapped with Cd (8.61%) and Fe overlapped with Cd (9.53%) in the microaggregates. Furthermore, the random forest model revealed that humic P and labile organic P greatly contributed to the sorptivity of Cd²⁺ by < 0.053 mm (13.3%) and 0.25-0.053 mm (13.4%) soil aggregates, respectively. Compared with the P fractions in different-sized soil aggregates, the contribution of Fe oxides to the sorption of Cd²⁺ by soil aggregates was more significant. Amorphous ferric oxide had the most significant contribution to the sorptivity of Cd²⁺ by < 0.053 mm (26.0%), 0.25-0.053 mm (23.0%), 2.0-0.25 mm (25.1%), and > 2.0 mm (33.9%) soil aggregates.

Bimetallic Fe/Al-MOF for the adsorptive removal of multiple dyes: optimization and modeling of batch and hybrid adsorbent-river sand column study and its application in textile industry wastewater

Bimetallic metal organic framework (MOF) has garnered interest over the years with its applications in industrial wastewater treatment. In this work, Fe-Al-1,4-benzene-dicarboxylic acid (FeAl(BDC)) MOF was synthesized, and adsorptive removal of Rhodamine B dye in batch and unique hybrid FeAl (BDC)-river sand fixed-bed column was studied. The experimental data from the batch studies corroborated well with the pseudo-second-order (PSO) (R²: 0.97) and Freundlich adsorption isotherm models (R²: 0.98) and achieved a maximum adsorption capacity of 48.59 mg/g in 90 min. Furthermore, a fixed-bed column study was conducted to assess the effect of varying flow rate (2, 5, 8 mL/min), bed height (5, 9, 13 cm), and feed concentration (10, 20, 30 mg/L) on the adsorption performance of FeAl(BDC) in continuous mode of operation. A uniform mixture of river sand and FeAl(BDC) by weight ratio (9:1) was packed into the column. The sand-FeAl(BDC) fixed-bed column could achieve the maximum adsorption capacity (q_exp) of 113.05 mg/g at a 5 mL/min flow rate, feed concentration of 20 mg/L, and a bed height of 13 cm. The experimental data of the column study were successfully fitted well with BDST, Thomas (q_cal: 114.94 mg/g), Yoon-Nelson, and dose-response models (q_cal: 113.41 mg/g) and R²: 0.97-0.99. The fitting parameter values from the BDST model raise the scope of viable upscaling of the fixed-bed column. In all, it is proposed that these river sand-FeAl(BDC)-based filters can be widely used in areas facing critical contamination and in poor communities with a high demand for water.

Potential exploration of Fe3O4/biochar from sludge as the media of bioretention system and its comparison with conventional media

The selection and configuration of soil media are a core issue of the bioretention system. A porous carbon material of Fe₃O₄/biochar (BSF) was prepared by adding pickling wastewater to modified sludge biochar, which could serve as a good adsorption performance and cheap media for bioretention system. Through the analytic hierarchy process (AHP), different media were evaluated according to their characteristics. By comparing the characteristics of BSF to bio-ceramic (BC), zeolite (ZE), and activated carbon (AC), it was found that BSF has a larger specific surface area and pore volume. The hydrological characteristics of the medium were also tested. The results show that BSF has better water-absorbing quality and hydraulic conductivity than the other three media, but the water-retention property of the medium seems to be inferior. BSF has stable adsorption performance for ammonia nitrogen (NH₄⁺-N) and total phosphorus (TP) in rainwater. Its high adsorption capacity is maintained at 5-35°C, but it is very susceptible to pH factors. The adsorption process by BSF and other media conforms to pseudo-second-order kinetics and the Langmuir model in rainwater. In general, the performance of BSF is shown to be superior to BC, ZE, and AC, making it a potential medium for bioretention system.

Adsorption-Desorption and Migration Behaviors of Oxaziclomefone in Different Agricultural Soils in China

Oxaziclomefone is an organic heterocyclic herbicide which has been widely used in rice fields. The aim of this paper is to investigate the adsorption-desorption and migration of oxaziclomefone in four Chinese agricultural soils. All the four soils show high adsorption capacity for oxaziclomefone, with similar adsorption rates at 84.48%-96.70%. Four adsorption kinetic models were used to fit the adsorption kinetic characteristics and the elovich model was the best, indicating that chemical processes were involved in adsorption. For the isothermal adsorption behavior of oxaziclomefone, the Freundlich model shows the best, indicating that the adsorption sites for oxaziclomefone in soil were heterogeneous. The retention factor in the soil thin-layer plates ranges from 0.083 to 0.250 and the retention factor 0-10 cm layer of the soil column was > 50, indicating that the herbicide was not easily migration from all four soils. Because oxaziclomefone has low mobility in different soils and is not easily leached, it poses a low potential threat of contaminating surface water and groundwater.

The effective removal of Congo Red using a bio-nanocluster: Fe3O4 nanoclusters modified bacteria

A bio-nanocluster (Fe₃O₄@bacteria) was prepared by simply mixture using the bacterial suspension and Fe₃O₄ nanoclusters to remove Congo red (CR) contamination from water resources. The bio-nanocluster was characterized by SEM, TEM and XPS. Adsorption efficiency, adsorption process and adsorption mechanism were comprehensively investigated. The maximum adsorption capacity (Q_m) of CR dye onto the Fe₃O₄@bacteria peaked at 320.1 mg/g, which was 2.88 times that of Fe₃O₄ under the same condition. Based on the equilibrium and kinetic studies, the Langmuir isotherm theory and pseudo-first-order model is appropriate to describe the adsorption process. The adsorption of CR is spontaneous and exothermic according to the thermodynamics parameters (ΔG^θ, ΔH^θ and ΔS^θ). The adsorption force dominated the Van der Waals force, biofloculation and chemisorption. The Fe₃O₄@bacteria could be applied potentially as an absorbent with high efficiency and environmentally friendly remediation of dyeing wastewater.

Enhanced ammonium removal on biochar from a new forestry waste by ultrasonic activation: Characteristics, mechanisms and evaluation

The adsorption treatment of ammonium-containing wastewater has attracted significant global attention. Most enhanced adsorption methods employ chemical modification, and there are few reports on physical activation. We present a physical activation to explore whether physical ultrasound may enhance the adsorption performance and comprehensive utilisation of a new forestry waste, Caragana korshinskii was used as a feedstock to prepare activated biochar (ACB) by controlling the pyrolysis temperatures and ultrasound parameters. The optimal parameters were determined via batch adsorption of NH₄⁺, and the adsorption characteristics were assessed by 8 kinds of models and influence experiments. Moreover, the physicochemical properties of ACB during the pyrolysis process were investigated, and the ultrasonic activation and adsorption mechanisms were discussed using multiple characterisation techniques. Additionally, the cost analysis, the safety of the ultrasonic process and disposal method also were evaluated. The results showed that the ultrasonic activation significantly enhanced the NH₄⁺ adsorption efficiency of biochar by approximately 5 times. ACB exhibited the best performance at 500 °C with an ultrasonic activation time of 480 min, frequency of 45 kHz, and power of 700 W. The ultrasonic activation reduced the biochar ash and induced pore formation, which increased the specific surface area through cavitation corrosion and micro-acoustic flow mechanism. The NH₄⁺ adsorption mechanisms comprised physicochemical processes, of which physical adsorption was dominant. The preparation cost of 1 kg ACB was about 0.42 US dollar, and no secondary pollution occurred in the activation process. The findings prove that ultrasonic technology is efficient and convenient for enhancing biochar adsorption performance, and thus is suitable for industrial applications and promotion.

Adsorption characteristics and mechanisms of Pb2+ and Cd2+ by a new agricultural waste-Caragana korshinskii biomass derived biochar

In order to explore the comprehensive utilisation and recycling technology of Caragana korshinskii resources, a new agricultural biomass waste, 15 kinds of Caragana korshinskii biochar (CB) were prepared by controlling the pyrolysis temperature and time at the anaerobic environment. Moreover, we pay more attention to deriving the adsorption mechanisms and exploring the difference in adsorption characteristics of Pb²⁺ and Cd²⁺. The optimal preparation conditions and the batch adsorption experiments were evaluated, and the adsorption characteristics and mechanisms were discussed using 8 theoretical adsorption models and multiple characterisation methods. The results showed that the CB prepared at 650 °C for 3 h presented the best performance. The Langmuir and Freundlich models can well simulate the isotherm adsorption process of CB for Pb²⁺ and Cd²⁺, respectively. The adsorption kinetics of CB for Pb²⁺ and Cd²⁺ were best fitted by the pseudo-second-order model. The adsorption equilibrium for Pb²⁺ and Cd²⁺ was reached within 3 h, and their maximum adsorption capacity reached 220.94 mg g^-1 and 42.43 mg g^-1, respectively. In addition, the best addition amount was 3 g L^-1 and 2.2 g L^-1 for Pb²⁺ and Cd²⁺, respectively. The optimum pH range was 3-6 for Pb²⁺ and 6-7.5 for Cd²⁺. The adsorption mechanisms of CB for Pb²⁺ and Cd²⁺ were physicochemical composite adsorption processes, mainly including physical sorption on surface sites, intraparticle diffusion, electrostatic adsorption, ion/ligand exchange, cationic-π interactions, surface complexation and precipitation. Furthermore, the ash of CB also presented a positive effect on the adsorption of Pb²⁺. Compared with other cellulose- and lignin-based biomass materials, CB showed low cost and efficient performance without complicated modification conditions. Therefore, this study demonstrates that CB is a promising raw material in water pollution control to immobilise heavy metals.

Decisive role of adsorption affinity in antibiotic adsorption on a positively charged MnFe2O4@CAC hybrid

The discharge and consequent occurrence of antibiotics in the environment has led to increasing concerns because their presence can promote the development of resistance genes, which in turn pose a significant health risk. A key process to control the transport and risk of antibiotics is adsorption. Thus, we investigated the adsorption mechanisms of six typical antibiotics onto a MnFe₂O₄@cellulose activated carbon (CAC) hybrid combining batch adsorption experiments and quantum chemical calculations. In the single-adsorbate adsorption systems, the solid-phase concentrations of the adsorbates varied from 152.8 to 395.7 mg/g, which were dependent on the adsorption affinity and molecular structures or sizes of the antibiotics. Chemisorption was the main adsorption mechanism, and it was driven by p-d electronic conjugation and cation-π interactions. In the competitive adsorption systems, the solid-phase concentrations of both primary (sulfamethazine, SMT) and secondary (the other five antibiotics) adsorbates decreased significantly. The decrease ratio of SMT varied from 15.42% to 67.28% while that of the secondary adsorbates varied from 14.13% to 52.74%. The "competition" strength was depended on the adsorption energy and the overlapping of adsorption sites. We believe that these findings will provide a better understanding of the adsorption characteristics of typical antibiotics and facilitate the strategy developing for the removal of antibiotics from the aqueous phase.

The Adsorption Behavior of Atrazine in Common Soils in Northeast China

The objective of this study was to evaluate the adsorption capacity of atrazine and the effects of different environmental conditions such as temperature, pH, Ca²⁺ and biochar on the adsorption characteristics of atrazine in different types of soil using the intermittent adsorption method. The kinetic experiment showed that the adsorption of atrazine in albic, black and saline-alkaline soils reached equilibrium within 24 h. In the thermodynamics experiment, the Freundlich model effectively described the adsorption characteristics of atrazine in all three types of soil, indicating that the adsorption process forms multi-molecular layers. Lower soil pH conditions were more favorable for the absorption of atrazine. The addition of appropriate concentrations of Ca²⁺ or biochar could promote the adsorption of atrazine by the soil. Biochar could promote the fixation of atrazine in soils.

Relative distribution of Cd2+ adsorption mechanisms on biochars derived from rice straw and sewage sludge

Qualitative and quantitative characterization of Cd²⁺ adsorption mechanisms was performed with rice-straw and sewage-sludge biochars produced at different temperature (300-700 °C), respectively. The pH effect, adsorption kinetics and isotherms were investigated, and chemical analyses of Cd²⁺-loaded biochars were conducted by SEM-EDS, XRD, FTIR and Boehm titration. This demonstrated that rice-straw biochars (RSBs) have greater adsorption capacities for Cd²⁺ than sewage-sludge biochars (SSBs), which was mainly due to precipitation and cation exchange mechanisms, with their contribution proportion to total adsorption from 76.1% to 80.8%. While in SSBs, both mechanisms were overshadowed by coordination with π electrons mechanism accounting for 59.2%-62.9% of total adsorption, even the role of cation exchange was negligible in the adsorption mechanisms accounting for 2.3%-6.7%. The relationship of each mechanism with biochar's properties were discussed, which further deepen our understanding of adsorption on biochars. These results suggest RSBs have great potential for removing Cd²⁺ from aqueous solutions.

Quantitative contribution of Cd2+ adsorption mechanisms by chicken-manure-derived biochars

This study investigated the efficiency and mechanisms of Cd²⁺ removal by chicken-manure biochar produced at different temperatures. Adsorption kinetics, isotherms, thermodynamic, and desorption were examined, and the biochars before and after adsorption were analyzed by SEM-EDS, FTIR, Boehm titration, and XRD. Kinetics of adsorption were better described by pseudo-second-order kinetic model than pseudo-first-order kinetic and intraparticle diffusion model under different initial Cd²⁺ concentrations of 20, 50, and 100 mg L^-1. Equilibrium adsorption was better modeled by Freundlich and Temkin isotherm equations than Langmuir equation at different temperatures of 25, 35, and 45 °C. Thermodynamic parameters confirmed the spontaneous and endothermic nature of the adsorption of Cd²⁺ at all of temperatures. Moreover, functional group complexation, precipitation, and cation exchange jointly contributed to Cd²⁺ adsorption on the biochars, whose relationship with the properties of biochar were also analyzed. The new precipitate as Cd₅(PO₄)₃OH was found during the adsorption. Complexation and precipitation were predominant mechanisms for all biochars (together accounting for 92.4-98.8%), while cation exchange made a relatively minor contribution to total Cd²⁺ removal (accounting for 1.2-7.6%). The relative distribution of each mechanism on the biochars was determined, which deepen our understanding of the Cd²⁺ adsorption process. These results are useful for future practical applications of biochar to removal heavy metals from water.

Separation of chloroform from a dilute solution using a cyclic peptide nanotube: A molecular dynamics study

This work firstly explored the potential application of a cyclic peptide nanotube (CPNT) in the separation of chloroform from a dilute solution. Four hydrophobic CPNTs of 8 × (WL)_4,5 and 8 × (AL)_4,5 all exhibit excellent adsorption characteristics to chloroform. The CPNT diameter, side chain structures and the concentration of chloroform in a solution all affect the adsorption characteristics of chloroform. CHCl₃ molecules are overwhelmingly adsorbed on the surfaces of these CPNTs as a cluster, and sporadically reside inside the channels, consistent with the chloroform's potentials of mean force (PMFs) inside and outside the channels. The distribution characteristics, molecular orientations and interactions with the surroundings of chloroform inside and outside four CPNTs embedded in individual dilute CHCl₃/water solutions were analyzed in detail, providing referable information of the adsorption characteristics of a hydrophobic CPNT to chloroform.

Adsorption property of Br-PADAP-impregnated multiwall carbon nanotubes towards uranium and its performance in the selective separation and determination of uranium in different environmental samples

A newer efficient U(VI) ion adsorbent was synthesized by impregnating Br-PADAP [2-(5-Bromo-2-pyridylazo)-5-(diethylamino)phenol] onto multiwall carbon nanotubes (MWCNTs). The effects of various operation conditions on uranium adsorption (i.e., pH contact time, temperature, and initial uranium concentration) were systematically evaluated using batch experiments. The results indicated that the uranium adsorption on modified MWNCTs (5.571 × 10^-3g/mg × min) reached faster equilibrium than that on pristine MWNCTs (4.832 × 10^-3g/mg × min), reflecting the involvement of appropriate functional groups of Br-PADAP on the chelating ion-exchange mechanism of U(VI) adsorption. Modified MWNCTs (83.4mg/g) exhibited significantly higher maximum Langmuir adsorption capacity than pristine MWNCTs (15.1mg/g). Approximately 99% of uranium adsorbed onto modified MWNCTs can be desorbed by 2.5mL of 1M HNO₃ solution. Therefore, Br-PADAP-modified MWNCTs can server as a promising adsorbent for efficient uranium adsorption applications in water treatment. Subsequently, the proposed solid-phase extraction (using a mini-column packed with Br-PADAP/MWCNT) was successfully utilized for analysing trace uranium levels by the ICP-AES method in different environmental samples with a pre-concentration factor of 300-fold. The coexistence of other ions demonstrated an insignificant interference on the separative pre-concentration of uranium. the detection limit was recognized as 0.14μg/L, and the relative standard deviation was approximately 3.3% (n = 7).

Biochars derived from giant reed (Arundo donax L.) with different treatment: characterization and ammonium adsorption potential

The adsorption characteristics of Arundo donax L.(AD) biochars for ammonium(NH₄⁺-N) were investigated. Absorbents were characterized through scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy analyses. AD-500 and AD-800 were produced from raw AD and pyrolyzed from room temperature to 500 and 800 °C, respectively. PD-500 was prepared by impregnating AD with a mild alkali solution and pyrolyzing from room temperature to 500 °C. The feasibility of the use of AD-500, AD-800, and PD-500 removing NH₄⁺-N from an aqueous solution was examined. The adsorption system followed the pseudo-first-order model. Results showed that the adsorption capacities of AD-biochars for NH₄⁺-N were enhanced after the final pyrolysis; temperature was increased or the mild alkali pretreatment was administered. When the initial NH₄⁺-N concentration was changed from 4 to 8 mM, the NH₄⁺-N sorption capacity of the biochar increased from 23 to 51%, with the final pyrolysis temperature increasing from 500 to 800 °C. The improved ratios were 12 to 33% when the biochar was prepared at 500 °C after the mild alkali pretreatment, and NH₄⁺-N sorption was enhanced due to ion exchange in the PD biochar. Graphical abstract Biochars derived from giant reed (Arundo donax L.) with different treatment :characterization and ammonium adsorption potential.

Atrazine adsorption removal with nylon6/polypyrrole core-shell nanofibers mat: possible mechanism and characteristics

A functionalized nylon6/polypyrrole core-shell nanofibers mat (PA6/PPy NFM) was prepared via situ polymerization on nylon6 electrospun nanofibers mat (PA6 NFM) template and used as an adsorbent to remove atrazine from aqueous solutions. The core-shell structure of PA6/PPy NFM can be clearly proved under scanning electron microscope (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The effects of initial solution pH and ionic strength, as well as the comparison of the adsorption capacity of functionalized (PA6/PPy NFM) and non-functionalized (PA6 NFM) adsorbent, were examined to reveal the possible adsorption mechanism. The results indicated that π-π interaction and electrostatic interaction should play a key role in the adsorption process. The kinetics and thermodynamics studies also further elucidated the detailed adsorption characteristics of atrazine removal by PA6/PPy NFM. The adsorption of atrazine could be well described by the pseudo-second-order equation. The adsorption equilibrium data was well fitted with the Freundlich isotherm model with a maximum adsorption capacity value of 14.8 mg/g. In addition, the increase of adsorption rate caused by a temperature increase could be felicitously explained by the endothermic reaction. The desorption results showed that the adsorption capacity remained almost unchanged after six adsorption/desorption cycles. These results suggest that PA6/PPy NFM could be employed as an efficient adsorbent for removing atrazine from contaminated water sources.

Dye and its removal from aqueous solution by adsorption: a review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.

Characterization of nanoporous carbon fibrous materials obtained by chemical activation of plane tree seed under ultrasonic irradiation

An ultrasonic irradiation was applied for the impregnation by chemical agents in the chemical activation process of new type of active carbon precursor. Plane tree seed, due to the unique fibrous structure and low cost is a promising eco-friendly raw material for the preparation of activated carbon materials. Ultrasonic irradiation was used for the impregnation step allowing the chemical activation by different agents: potassium or sodium hydroxide, hydrogen peroxide and pyrogallol. The porous structures were examined by nitrogen adsorption/desorption isotherms at 77 K and electrochemically by cyclic voltammetry. The textures of these materials were observed by scanning electron microscopy. The application of ultrasonic irradiation in the impregnation step increased surface area of the final material more than two times in comparison to the material which impregnation in the activation process was by conventional stirring. Ultrasonic irradiation enhances the chemical activation process and the activated carbon fibrous materials with nanoporous structure were obtained by impregnation of seeds with alkaline hydroxides. Total surface areas of these samples were 976 m(2) g(-1) and 1130 m(2) g(-1). These fibers have total specific capacitance as high as 125 F g(-1) and 53 F g(-1) which major fraction in both cases originate from internal micropores structure.

Adsorption characteristics of Cu and Zn onto various size fractions of aggregates from red paddy soil

Soil aggregate is the basic structure unit of soils and the ability of various size fractions are different in the aspect of adsorbing and transferring heavy metals in the environment. In this study, bulk soil from red paddy field was partitioned into four aggregate-size fractions and their adsorption characteristics for Cu and Zn were studied. Our results showed that: Pseudo-second order model was more successful to fit the adsorption process in the kinetic experiments and the isothermal experiments data can be described well with the Freundlich model as a whole. Due to higher contents in organic matter, CEC and free iron oxide, the <0.002mm fraction was found to have the highest initial sorption rate and maximum adsorption capacity. The adsorption amount of metals increased as the increasing of pH and the percentage of adsorbed metal susceptible to desorption into 0.01M NaNO3 was greater for Zn than for Cu, while their variation trends were quite opposite. More specific adsorption sites in the <0.002mm fraction lead to more desorption amount for this particle size of soil at low pH condition. After 60 days of incubation, Cu and Zn were observed to enrich in the clay-size aggregates with fractions more stable than other particles.

Adsorption characteristics of siloxanes in landfill gas by the adsorption equilibrium test

Due to the increase in energy cost by constantly high oil prices and the obligation to reduce greenhouse effect gases, landfill gas is frequently used as an alternative energy source for producing heat and electricity. Most of landfill gas utility facilities, however, are experiencing problems controlling siloxanes from landfill gas as their catalytic oxidizers are becoming fouled by silicon dioxide dust. To evaluate adsorption characteristics of siloxanes, an adsorption equilibrium test was conducted and parameters in the Freundlich and Langmuir isotherms were analyzed. Coconut activated carbon (CA1), coal activated carbon (CA2), impregnated activated carbon (CA3), silicagel (NCA1), and activated alumina (NCA2) were used for the adsorption of the mixed siloxane which contained hexamethyldisiloxane (L2), octamethylcyclotetrasiloxane (D4), and decamethylcyclopentasiloxane (D5). L2 had higher removal efficiency in noncarbon adsorbents compared to carbon adsorbents. The application of Langmuir and Freundlich adsorption isotherm demonstrated that coconut based CA1 and CA3 provided higher adsorption capacity on L2. And CA2 and NCA1 provided higher adsorption capacity on D4 and D5. Based on the experimental results, L2, D4, and D5 were converted by adsorption and desorption in noncarbon adsorbents. Adsorption affinity of siloxane is considered to be affect by the pore size distribution of the adsorbents and by the molecular size of each siloxane.