Hierarchical CoWO4/NixFeyS microspheres bearing crystalline-amorphous interface as a multifunctional platform for outperformed water splitting and sensitive hydrazine sensing

Highly efficient and multifunctional electrocatalysts are of high value in energy transformation and electrochemical sensing. Herein, hierarchically architectured cobalt tungstate/nickel iron sulfide (CoWO4/NixFeyS) microspheres with a crystalline-amorphous interface have been prepared on bimetallic substrate of nickel-iron foam (NIF) by a two-step hydrothermal method. Electrochemical characterization shows that CoWO4/NixFeyS microspheres can boost the electrocatalytic activity effectively through the synergistic effect on the crystalline-amorphous interface. When the CoWO4/NixFeyS is applied as the electrocatalysts for oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), the overpotentials at a high current density of 500 mA cm-2 are only 322.8 mV and 306.5 mV, respectively. The overall water splitting device composed of CoWO4/NixFeyS/NIF couple only needs a cell voltage of 1.80 V to reach a current density of 100 mA cm-2, and 2.19 V to reach 500 mA cm-2. The CoWO4/NixFeyS/NIF can be also utilized as an effective electrochemical platform for the sensing of toxic hydrazine in a wide range from 50 μM to 17.3 mM, with a detection limit of 46.4 μM. All these results display that the CoWO4/NixFeyS/NIF can be a high-performance multifunctional material for energy transformation and environmental pollutant monitoring.

D-π-A Carbzazole Based Reactive Cyano-Substituted C = C bond Probe for Selective and Sensitive Detection of Hydrazine in Aqueous Media

This work established a newly designed and synthesized carbazole N-phenyl π-conjugated vinyl malononitrile (CPM) fluorescent sensor, which showed typical and remarkable redshift emission properties with different polarity index solvents. Investigative probe CPM is colorimetric and fluorimetric ultrafast and ultrasensitive detection of hazardous hydrazine in an aqueous medium. Furthermore, CPM showed colorimetric and fluorometric responses to interference tests with other amines and high selectivity for detecting hydrazine without interference with other amines in colorimetric and fluorimetric methods. This probe CPM for hydrazine was as low as the lower detection limit value of 2.21 × 10- 8 M. The probe CPM expects significant attention due to its simplicity and cost-effectiveness in detecting hazardous hydrazine. UV-vis, PL, NMR, and MS spectra confirmed the mechanism of probe CPM detection of hazardous hydrazine. However, making a piece test kit attractive for practical hydrazine vapor leak-detection applications is easy. This study can be applied to many pipeline gas transmission industries and transportation facility sectors.

Enhancement of hydrazine accumulation in anammox bioreactors

The role of hydrazine (N2H4) in anammox metabolism has been widely studied; however, studies on N2H4 biosynthesis by anammox bacteria are limited in the literature. In this context, the current research aims to investigate the enhancement of biological N2H4 production in the anammox process in a long-term manner. The experimental studies started with the optimization of the operating conditions to achieve maximum N2H4 accumulation. Under favorable conditions (pH = 8.97 ± 0.08; T = 35.5 ± 0.5 °C; initial hydroxylamine dose = 1.46 ± 0.01 mM), 17.16 ± 0.64 mg L-1 of N2H4 accumulated in the batch systems. The continuity of N2H4 bioproduction was then evaluated by long-term observations. A continuous flow bioreactor was operated in four consecutive manipulated periods under optimized conditions. In the long-term operated bioreactor, 55.10 ± 0.30 mg L-1 N2H4 was accumulated at optimal conditions, which was 2.5 times higher than reported in the literature. Although manipulation of the bioreactor operating conditions initially resulted in a significant increase in N2H4 bioaccumulation, it subsequently caused a severe deterioration in anammox activity. However, this could be mitigated by increasing the biomass concentration in the anammox systems. In addition, the relative abundance of Candidatus Kuenenia decreased by 1.88% throughout the long-term operation.

A novel dual-responsive colorimetric/fluorescent probe for the detection of N2H4 and ClO- and its application in environmental analysis and bioimaging

Hydrazine (N2H4) and hypochlorite (ClO-) are both reactive chemical substances extensively utilized across various industrial domains. Excessive hydrazine (N2H4) and hypochlorite (ClO-) can pose significant risks to the environment, ecosystems, and human health. In order to assess and control the environmental hazard caused by N2H4 and ClO-, there is an imperative need for efficient methods capable of rapid and precise detection of these contaminants. This paper introduces a novel dual-responsive colorimetric/fluorescent probe (MDT) for the detection of N2H4 and ClO- in environmental and biological samples. The probe exhibits turn-on fluorescent responses to N2H4 or ClO- with low detection limits (N2H4: 8 nM; ClO-: 15 nM), large Stokes shifts (N2H4: 175 nm; ClO-: 203 nm), short response time (N2H4: 4 min; ClO-: 5 s) and broad pH range (5-10). In practical applications, MDT has been successfully employed in detecting N2H4 and ClO- in water and soil samples from diverse locations. Test strips loaded with MDT offer a visual and convenient means to track N2H4 vapor and quantify N2H4 and ClO- concentrations in solutions. Finally, MDT has been utilized for sensing N2H4 and ClO- in Arabidopsis thaliana roots and living zebrafish. This study presents a promising tool for monitoring N2H4 and ClO- in the environment and living organisms.

Bacterial Hydrazine Biosynthetic Pathways Featuring Cupin/Methionyl tRNA Synthetase-like Enzymes

Nitrogen-Nitrogen (N-N) bond-containing functional groups in natural products and synthetic drugs play significant roles in exerting biological activities. The mechanisms of N-N bond formation in natural organic molecules have garnered increasing attention over the decades. Recent advances have illuminated various enzymatic and nonenzymatic strategies, and our understanding of natural N-N bond construction is rapidly expanding. A group of didomain proteins with zinc-binding cupin/methionyl-tRNA synthetase (MetRS)-like domains, also known as hydrazine synthetases, generates amino acid-based hydrazines, which serve as key biosynthetic precursors of diverse N-N bond-containing functionalities such as hydrazone, diazo, triazene, pyrazole, and pyridazinone groups. In this review, we summarize the current knowledge on hydrazine synthetase mechanisms and the various pathways employing this unique bond-forming machinery.

A wireless fluorescent sensing device for on-site closed-loop detection of hydrazine levels in the environment

Given the extensive need for the detection of hydrazine (N2H4) in the biomedical and chemical-pharmaceutical sectors, there is a necessity to devise a fast, sensitive, specific, and portable technique for precisely quantifying hydrazine at environmental levels. In our work, an "OFF-ON" type fluorescent probe namely 2-(4-(10-(naphthalen-2-yl)anthracen-9-yl)phenyl)isoindole-1,3-dione (NAP), which was inspired by the "Gabriel" reaction, was synthesized. The NAP fluorescent cellulose film successfully achieved the detection of hydrazine vapor with a LOD = 0.658 ppm. Compared to previous qualitative methods for detecting hydrazine, this study successfully achieved quantitative identification of hydrazine at low concentrations. In addition, a portable sensor device based on NAP cellulose film was successfully integrated, enabling ultra-sensitive, wireless, remote, and real-time detection of N2H4 vapor. It was determined that the probe (NAP) exhibited excellent detection performance when applied to various environmental samples including distilled water, tap water, creek water, soil and plants. This study introduces a potentially effective approach for detecting hydrazine in real-world settings.

A new derivatizing reagent for the determination of 5-nitro-2-furaldehyde in trout muscle by liquid chromatography-tandem mass spectrometry

The 5-nitro-2-furaldehyde (5-NF) is an aldehyde aromatic organic compound that has been envisaged as an alternative marker for detecting nitrofurazone treatment abuse and to avoid the false positive results induced by the semicarbazide. Analyzing 5-NF presents challenges, and its derivatization reaction with hydrazine reagents is required to enhance the capability of its detection and its identification. This study aims at developping an analytical method for 5-NF determination in trout muscle samples based on chemical derivatization prior to analysis by liquid chromatography-tandem mass spectrometry. Four commercially available hydrazine reagents, namely: N,N-Dimethylhydrazine (DMH), 4-Hydrazinobenzoic acid (HBA), 2,4-Dichlorophenylhydrazine (2,4-DCPH) and 2,6-Dichlorophenylhydrazine (2,6-DCPH) were proposed for the first time as derivatizing reagents in the analysis of 5-NF. The derivatization reaction was simultaneously performed along with the extraction method in acidic condition using ultrasonic assistance and followed by liquid extraction using acetonitrile. The efficiency of the chemical reaction with 5-NF was examined and the reaction conditions including the concentration of hydrochloric acid, pH, temperature, reaction time and the concentration of the derivatizing reagents were optimized. Experiments with fortified samples demonstrated that 2,4-DCPH derivatizing reagent at 20 mM for 20 min of ultrasonic treatment under acidic condition (pH 4) gave an effective sample derivatization method for 5-NF analysis. Under the optimized conditions, the calibration curves were linear from 0.25 to 2 μg kg-1 with coefficient of determination >0.99. The recoveries ranged from 89 % to 116 % and precision was less than 13 %. The limit of detection and quantification were 0.1 and 0.2 μg kg-1, respectively.

Phylogeny-guided Characterization of Bacterial Hydrazine Biosynthesis Mediated by Cupin/methionyl tRNA Synthetase-like Enzymes

Cupin/methionyl-tRNA synthetase (MetRS)-like didomain enzymes catalyze nitrogen-nitrogen (N-N) bond formation between Nω-hydroxylamines and amino acids to generate hydrazines, key biosynthetic intermediates of various natural products containing N-N bonds. While the combination of these two building blocks leads to the creation of diverse hydrazine products, the full extent of their structural diversity remains largely unknown. To explore this, we herein conducted phylogeny-guided genome-mining of related hydrazine biosynthetic pathways consisting of two enzymes: flavin-dependent Nω-hydroxylating monooxygenases (NMOs) that produce Nω-hydroxylamine precursors and cupin/MetRS-like enzymes that couple the Nω-hydroxylamines with amino acids via N-N bonds. A phylogenetic analysis identified the largely unexplored sequence spaces of these enzyme families. The biochemical characterization of NMOs demonstrated their capabilities to produce various Nω-hydroxylamines, including those previously not known as precursors of N-N bonds. Furthermore, the characterization of cupin/MetRS-like enzymes identified five new hydrazine products with novel combinations of building blocks, including one containing non-amino acid building blocks: 1,3-diaminopropane and putrescine. This study substantially expanded the variety of N-N bond forming pathways mediated by cupin/MetRS-like enzymes.

Construction of Co-ZIF-derived CoS2@Cu hollow heterogeneous nanotube array for the detection of hydrazine in environmental water samples

As a neurotoxin, it is necessary to establish a low cost, stable and sensitive method for the quantitative detection of hydrazine. Using Co-ZIF (zeolite imidazole framework) nanorods as precursor, CoS2 hollow nanotube array heterogeneous structure loaded with Cu nanoparticles were prepared on carbon cloth (CC) by etching, calcination and plasma magnetron sputtering (CoS2@Cu HNTA/CC). As a self-supporting electrode, its hollow heterogeneous structure provides a large area of electron transfer channel for the oxidation of the food pollutant hydrazine. In addition, bimetallic synergies and in situ N doping regulated the electronic structure of CoS2@Cu HNTA/CC, and thus significantly improved the electrical conductivity and catalytic activity. As an efficient hydrazine sensor with a wide linear range of 1 μM L-1-10 mM (1 μM-1 mM and 1 mM-10 mM), its sensitivity and the limit of detection are 7996 μA mM-1 cm-2, 3772 μA mM-1 cm-2 and 0.276 μM (S/N = 3), respectively. This study provides a new strategy for the construction of MOFs (Metal Organic Framework)-derived bimetallic composites and their application in electrochemical sensing.

Old drug, new use: The thalidomide-based fluorescent probe for hydrazine detection

Thalidomide, a widely used ligand for cereblon (CRBN), has been gaining attention for its targeted protein degradation. In this study, we aimed to improve the optical and biocompatible features of hydrazine fluorescent probes by a novel probe called TH-1, based on the thalidomide moiety. Our results demonstrate that TH-1 exhibits remarkable properties including significant colorimetric changes, a fast response time, excellent selectivity, and high sensitivity as a hydrazine fluorescent probe. The mechanism by which TH-1 senses hydrazine has been convincingly verified. Notably, we have successfully applied TH-1 for bioimaging of hydrazine in living A549 cells, highlighting its practical significance. Moreover, the utilization of thalidomide, a clinically approved drug, as a fluorescent skeleton has expanded the repertoire of fluorescent skeleton libraries, paving the way for further on fluorescent probes.

Phenothiazine-based fluorescent probes for the detection of hydrazine in environment and living cells

As an important chemical raw material, hydrazine brings convenience to people's lives and provides opportunities for human development. However, the misuse or leakage of hydrazine has brought pollution to the environment, including water, soil and living organisms. At the same time, hydrazine poses a potential threat to human health as a carcinogen. Despite the enormous challenges, it is crucial to develop an effective method to detect hydrazine in environmental samples. In this work, we have synthesized a series of probes based on phenothiazine fluorophore by the introduction of different substituents and developed a novel probe for the detection of hydrazine. The probe is capable of detecting hydrazine in aqueous solutions with high sensitivity and selectivity, and can be easily fabricated into paper test strips for use in in situ samples. In addition, the probe is effective in detecting hydrazine in water, soil, cells, and zebrafish, providing an excellent tool for detecting hydrazine in the environment.

Engineering a "turn-on" NIR fluorescent sensor-based hydroxyphenyl benzothiazole with a cinnamoyl unit for hydrazine and its environmental and in-vitro applications

Hydrazine (N2H4), a chemical compound widely used in various industrial applications, causes significant environmental and biological hazards. Therefore, it is crucial to develop methodologies for the visualization and real time tracking of N2H4. In this regard, we have constructed a novel near-infrared fluorescent probe (HBT-Cy) that can effectively detect N2H4 in various samples. HBT-Cy contains 2-(2'-hydroxyphenyl)benzothiazole (HBT), cinnamoyl (Cy), and pyridinium (Py) moieties. Importantly, HBT-Cy exhibits a rapid, selective, and highly sensitive response to N2H4. This response results in the release of HBT-Py and the generation of considerable colorimetric changes along with a significant NIR (near infrared) fluorescence signal, peaking at 685 nm. Advantages of this system include turn on NIR fluorescence with large Stokes shift, (approximately 171 nm), low limit of detection (LOD = 0.11 μM) and quantum yield (0.211). The probe with low cytotoxic behavior demonstrates strong NIR fluorescence imaging capabilities to visualize endogenous and exogenous N2H4 in live cells. This mitochondria-targetable probe shows effective subcellular localization. These results suggest that HBT-Cy is a valuable probe for tracking and investigating the behavior of N2H4 in biological systems and environmental samples.

Myricetin-based fluorescence probes with AIE and ESIPT properties for detection of hydrazine in the environment and fingerprinting

BACKGROUND

Hydrazine (N2H4) is a highly toxic and versatile chemical raw material, which poses a serious threat to the environment and human health when used in large quantities. However, the traditional methods for the detection of N2H4 have the disadvantages of time-consuming, complicated operation and expensive instruments. In contrast, fluorescence probes have many advantages, such as simple operation, high sensitivity, good selectivity, and fast response time. Therefore, there is an urgent need for a fluorescence probe that can rapidly and accurately detect the presence of N2H4 and monitor the changes in its concentration.

RESULTS

For this purpose, we designed and synthesized a series of myricetin fluorescence probes 3-(substituent group)-5,7-dimethoxy-4-oxo-2-(3,4,5-trimethoxy. phenyl)-4H-chromen-4-one (Myr-R) for N2H4 detection. In the presence of N2H4, the probe 5,7-dimethoxy-3-(2,3,4,5,6-pentafluorobenzoate)-2-(3,4,5-trimethoxyphen-yl). -4H-chr-omen-4-one (Myr-3) shows significant fluorescence changes, double emission properties and a large Stokes shift (183 nm), and exhibits high selectivity and sensitivity to N2H4 (The detection limit is 93 nM). Importantly, the qualitative and quantitative analysis of N2H4 in water, soil, and air can be accomplished using fluorescence, smartphone, and UV lamps coupled with Myr-3. In addition, Myr-3 can be used for monitoring and imaging intracellular N2H4. Meanwhile, the fluorophore 3-hydroxy-5,7-dimethoxy-2-(3,4,5-trimethoxyphenyl)-4H-benzopyran-4-one (Myr-Me) was applied to fingerprinting of different substrate materials due to the fact that it exhibits strong yellow fluorescence emission in the solid state and shows excellent contrast and high resolution.

SIGNIFICANCE

The probe Myr-3 is not only able to rapidly detect N2H4 in complex environments, but also can be used for imaging intracellular N2H4. In addition, the fluorophore Myr-Me can be used as an effective imaging agent for visual fingerprinting. These properties enable the probe Myr-3 and the fluorophore Myr-Me for a wide range of potential applications in related fields.

A novel pathway for ratiometric hydrazine sensing in environmental samples and the detection of intracellular viscosity by a mitochondria-targeted fluorescent sensor

Mass and signal transfer, dispersion of reactive metabolites in living cells, and interactions between biomacromolecules are greatly affected by viscosity inside the cells. It is crucial to accurately determine viscosity for reliable results because of the complexities of live cells. Herein, we introduce a new fluorescence probe based on the cyanobiphenyl and benzothiazolium units. This probe not only responds to intracellular viscosity but also detects hydrazine, a widely used chemical that poses significant environmental and toxic risks to organisms. The proposed sensing mechanism provides a new pathway that includes intramolecular cyclization with hydrazine, which differs from other sensing mechanisms. A weak emission (at 590 nm) of the probe under excitation at 365 nm resulted in 25-fold higher emission at 488 nm after the addition of N2H4. The quantum yield of the probe (Φ = 0.089) increased to Φ = 0.199 with the addition of N2H4. In addition, the probe demonstrated 45-fold emission enhancement at 560 nm in viscous media, with a color change from non-fluorescence to yellow fluorescence. Good hydrazine sensing features with high adaptability, selectivity, sensitivity, ratiometric and fast response (90 s), low cytotoxicity (more than 90% of cell viability), low detection limit (86.0 nM), good linearity in the range of 0-35.0 μM, and high signal-to-noise ratio sensing capability were achieved. The hydrazine-sensing capability of the mitochondria-targetable probe in living cells makes it a strong candidate for various biological and environmental applications, including intracellular tracking and imaging. These results suggest that the present probe shows significant potential for the effective fluorescence detection of hydrazine.

New 1,8-naphthalimide-based colorimetric fluorescent probe for specific detection of hydrazine and its multi-functional applications

Detection of hydrazine is particularly important given its toxicity and extensive application in various industries. In the present paper, a colorimetric fluorescent probe NI-CIN based on 1,8-naphthalimide derivative was rationally designed and simply synthesized for specific detection of hydrazine based on the intramolecular charge transfer (ICT) mechanism. Upon the addition of hydrazine, a significant fluorescence enhancement at 556 nm could be observed within 4 min with a distinct color change from colorless to bright yellow, readily observed by naked eye. Except for HRMS and 1H NMR, density functional theory (DFT) calculations were also performed to support the sensing mechanism. In addition, eco-friendly paper test strips were easily prepared by NI-CIN for selective and real-time detection of hydrazine under aqueous and vapor phases. Furthermore, NI-CIN shows many potential applications for detecting hydrazine in real water and soil samples along with bio-imaging in HepG-2 cells and zebrafish.

A responsive organic probe based photoelectrochemical sensor for hydrazine detection

This study developed a new photoelectrochemical (PEC) sensor for the detection of the hydrazine (N2H4, HZ) based on a donor-π-bridge-acceptor (D-π-A) configuration organic photoactive dye (Dye-HZ). The dye was covalently immobilized on an FTO/TiO2 (FTO: fluorine-doped tin oxide) substrate, resulting in a photoanode FTO/TiO2/Dye-HZ that exhibits a specific PEC response to N2H4. Hydrazine reacts with the acetyl group in the Dye-HZ molecule, leading to its removal and the formation of a hydroxy group. The hydroxy group dissociates a hydrogen ion, forming a phenoxide anion with strong electron-donating characteristics. As a result, the dye molecule exhibits a strong intramolecular charge transfer effect, significantly enhancing absorbance and photoelectric response under visible light irradiation, leading to a remarkable increase in photocurrent and enabling highly sensitive detection of hydrazine. Furthermore, the PEC sensor demonstrates excellent selectivity and can be applied for the detection of hydrazine in real water samples. This study presents an innovative PEC sensing approach for hydrazine based on responsive photoactive molecules, providing new insights for PEC detection of other environmental pollutants.

Reconstitution of the Final Steps in the Biosynthesis of Valanimycin Reveals the Origin of Its Characteristic Azoxy Moiety

Valanimycin is an azoxy-containing natural product isolated from the fermentation broth of Streptomyces viridifaciens MG456-hF10. While the biosynthesis of valanimycin has been partially characterized, how the azoxy group is constructed remains obscure. Herein, the membrane protein VlmO and the putative hydrazine synthetase ForJ from the formycin biosynthetic pathway are demonstrated to catalyze N-N bond formation converting O-(l-seryl)-isobutyl hydroxylamine into N-(isobutylamino)-l-serine. Subsequent installation of the azoxy group is shown to be catalyzed by the non-heme diiron enzyme VlmB in a reaction in which the N-N single bond in the VlmO/ForJ product is oxidized by four electrons to yield the azoxy group. The catalytic cycle of VlmB appears to begin with a resting μ-oxo diferric complex in VlmB, as supported by Mössbauer spectroscopy. This study also identifies N-(isobutylamino)-d-serine as an alternative substrate for VlmB leading to two azoxy regioisomers. The reactions catalyzed by the kinase VlmJ and the lyase VlmK during the final steps of valanimycin biosynthesis are established as well. The biosynthesis of valanimycin was thus fully reconstituted in vitro using the enzymes VlmO/ForJ, VlmB, VlmJ and VlmK. Importantly, the VlmB-catalyzed reaction represents the first example of enzyme-catalyzed azoxy formation and is expected to proceed by an atypical mechanism.

Regulation mechanism of hydrazine and hydroxylamine in nitrogen removal processes: A Comprehensive review

As the new fashioned nitrogen removal process, short-cut nitrification and denitrification (SHARON) process, anaerobic ammonium oxidation (anammox) process, completely autotrophic nitrogen removal over nitrite (CANON) process, partial nitrification and anammox (PN/A) process and partial denitrification and anammox (PD/A) process entered into the public eye due to its advantages of high nitrogen removal efficiency (NRE) and low energy consumption. However, the above process also be limited by long-term start-up time, unstable operation, complicated process regulation and so on. As intermediates or by-metabolites of functional microorganisms in above processes, hydroxylamine (NH2OH) and hydrazine (N2H4) improved NRE of the above processes by promoting functional enzyme activity, accelerating electron transport efficiency and regulating distribution of microbial communities. Therefore, this review discussed effects of NH2OH and N2H4 on stability and NRE of above processes, analyzed regulatory mechanism from functional enzyme activity, electron transport efficiency and microbial community distribution. Finally, the challenges and limitations for nitric oxide (NO) and nitrous oxide (N2O) produced from regulation of NH2OH and N2H4 are discussed. In additional, perspectives on future trends in technology development are proposed.

Preparation of O-Glycans from Mucins Using Hydrazine Treatment

Mucin glycomic analysis is crucial owing to the participation of mucin O-glycans in several biological functions. Liquid chromatographic analysis of fluorescently labeled glycans is an effective tool for glycomic analysis. The first step of this analysis involves the release of O-glycans from mucins. As no enzyme is known to release all glycans, chemical methods are required for the process; therefore, hydrazine treatment is a commonly used chemical method. It enables the release of O-glycans from mucin while preserving the aldehyde group at the reducing end. This ensures that the reducing end can be modified using fluorescent reagents. However, it is also accompanied by the degradation of the glycans through a process called "peeling." Here, we describe a method for releasing glycans from mucins using hydrazine treatment with minimal "peeling."

Bis-chalcone Fluorescent Probe for Hydrazine Ratio Sensing in Environment and Organism

In this paper, four novel hydrazine fluorescent probes X1-X4 with bis-chalcone structure were designed and synthesized. Through the measurement of its optical properties, it is found that it can quickly identify hydrazine, high sensitivity, low detection limit, and good anti-interference ability. The recognition of hydrazine by probes X1-X4 is not affected in the pH range of 4-10, X2 has the highest sensitivity, and the detection limit is as low as 0.336 × 10-7 M. Through Gaussian quantization calculation of probe molecules and their reaction products with hydrazine, it is speculated that the recognition mechanism is the closure of intramolecular charge transfer effect. In addition, the cytotoxicity and imaging of HeLa cells were tested, which showed that probes X1-X4 could be used to detect hydrazine in cells.

Synthesis of silver nanoparticles for use in conductive inks by chemical reduction method

In this study, the chemical reduction method was applied to synthesize silver nanoparticles used to prepare conductive inks. The two variables of polyvinylpyrrolidone (PVP)-stabilized mole in the 0.01-0.03 mol range and hydrazine reducing mole in the 0.1-0.5 mol range, along with constants such as precursor mole (silver nitrate), complexing mole (ethylene diamine) and solvent mole (water), were used. Nine random samples proposed by the Design Expert software were examined and studied. X-ray diffraction (XRD) patterns, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS) were then used to characterize and evaluate the synthesized nanoparticles. According to the results obtained by XRD, FE-SEM and TEM analyses, the sample with 0.025 mol and 0.3 mol PVP had the minimum size of silver nanoparticles, which was around 20 nm, so it was chosen as the optimal sample for further research. The conductive ink was also prepared with the optimal sample of silver nanoparticles in 40% by weight and then characterized and evaluated by applying ultraviolet-visible (UV-Vis), simultaneous thermal analysis (STA), FE-SEM and electrical conductivity analysis. Finally, conductive ink was applied to polyethylene terephthalate (PET) and acrylonitrile butadiene styrene (ABS) substrates. The surface electrical resistance of conductive ink on PET and ABS substrates was then measured at about 6.4 Ω and 2.2 Ω, respectively.

Cinnamyl Chalcone Based AIE Fluorescent Probes for Sensitive Detection of Hydrazine and its Application in Living Cells

Widely utilized in the chemical industry and agriculture, hydrazine is easily absorbed by living things and can cause physical harm when in touch for an extended period of time. As a result, a novel cinnamaldehyde chalcone C5 was produced by Friedel Crafts process and aldol condensation reaction. Triphenylamine was used as the raw material for hydrazine determination in both reactions. Chalcone C5 exhibits significant AIE behavior in a mixed mixture of ethanol and water in addition to having great selectivity and a low detection limit (0.119 nm) for hydrazine. The solvent effect test revealed a linear relationship between the Stokes shift of C5 in the solvent and the rise in solvent orientation polarization. It is important to note that C5 is not harmful to MCF-7 cells, mouse kidney cells, or pig kidney cells. Furthermore, research on cell imaging has demonstrated that probe C5 may be utilized to image the fluorescence of hydrazine in active MCF-7 cells.

Synthesis and applications of a corrole-based dual-responsive fluorescent probe for separate detection of hydrazine and hydrogen sulfide

Here, a corrole-based dual-responsive fluorescent probe DPC-DNBS was rationally designed and synthesized for the separate detection of hydrazine (N₂H₄) and hydrogen sulfide (H₂S) with high selectivity and sensitivity. The probe DPC-DNBS is intrinsically none fluorescent due to PET effect, however, addition of increasing amount of N₂H₄ or H₂S to DPC-DNBS turned on an excellent NIR fluorescence centered at 652 nm and thereby provided a colorimetric signaling behavior. The sensing mechanism was verified by HRMS, ¹H NMR and the DFT calculations. Common metal ions and anions do not interfere with the interactions of DPC-DNBS with N₂H₄ or H₂S. Furthermore, the presence of N₂H₄ does not affect the detection of H₂S; however, the presence of H₂S interferes with the detection of N₂H₄. Hence, quantitative detection of N₂H₄ must occur in an H₂S-free environment. The probe DPC-DNBS displayed some fascinating merits in separate detection of these two analytes, including large Stokes shift (233 nm), fast response (15 min for N₂H₄, 30 s for H₂S), low detection limit (90 nM for N₂H₄, 38 nM for H₂S), wide pH range (6-12) and outstanding biological compatibility. Significantly, DPC-DNBS was utilized to detect hydrazine in real water, soil and food samples. And its favorable performances for separate detection N₂H₄ and H₂S were successfully demonstrated in HeLa cells and zebrafish, indicating its value of practical application in biology.

A near-infrared ratiometric fluorescent probe for hydrazine and its application for gaseous sensing and cell imaging

Hydrazine (N₂H₄) is a widely used raw material in the chemical industry, but at the same time hydrazine has extremely high toxicity. Therefore, the development of efficient detection methods is crucial for monitoring hydrazine in the environment and evaluating the biological toxicity of hydrazine. This study reports a near-infrared ratiometric fluorescent probe (DCPBCl₂-Hz) for the detection of hydrazine by coupling a chlorine-substituted D-π-A fluorophore (DCPBCl₂) to the recognition group acetyl. Due to the halogen effect of chlorine substitution, the fluorophore has an elevated fluorescence efficiency and a lowered pKa value and is suitable for physiological pH conditions. Hydrazine can specifically react with the acetyl group of the fluorescent probe to release the fluorophore DCPBCl₂, so the fluorescence emission of the probe system significantly shifted from 490 nm to 660 nm. The fluorescent probe has many advantages, such as good selectivity, high sensitivity, large Stokes shift, and wide applicable pH range. The probe-loaded silica plates can realize convenient sensing gaseous hydrazine with content down to 1 ppm (mg/m³). Subsequently, DCPBCl₂-Hz was successfully applied to detect hydrazine in soils. In addition, the probe can also penetrate living cells and allow the visualization of intracellular hydrazine. It can be anticipated that probe DCPBCl₂-Hz will be a useful tool for sensing hydrazine in biological and environmental applications.

Construction of rose flower-like NiCo-LDH electrode derived from bimetallic MOF for highly sensitive electrochemical sensing of hydrazine in food samples

It is necessary to efficient detection hydrazine in food. Exploring highly sensitive, low-cost and fast response electrochemical hydrazine sensing methods has been a challenge in this field. In this paper, a conformal transformation method is used to prepare rose flower-like NiCo-LDH derivating from the bimetallic NiCo-MOFs, and the N₂H₄ sensing platform with a large electrocatalytic area, high conductivity and good stability was constructed. Based on the synergy between Ni and Co and the remarkable catalytic activity of the rough 3D flower-like structure, the N₂H₄ sensor has a linear response in the concentration range of 0.001-1 mmol/L and 1-7 mmol/L, with a sensitivity of 5342 μA L mmol^-1 cm^-2 and 2965 μA L mmol^-1 cm^-2 (S/N = 3), respectively, and low limit of detection of 0.043 μmol/L. This study opens a new door for the successful application of electrochemical sensors to detect N₂H₄ in real food samples.

A unique triple-channel fluorescent probe for discriminative detection of cyanide, hydrazine, and hypochlorite

Herein, the first triple-channel fluorescent probe, TTB, excited at the same wavelength (λ_ex = 360 nm) in the same sensing medium for the detection and discrimination of cyanide, hydrazine, and hypochlorite, is disclosed. While a fluorescent white color appeared (λ_em = 470 nm) with the addition of cyanide ion into the probe solution, upon addition of hydrazine and hypochlorite, green (λ_em = 503 nm) and orange (λ_em = 585 nm) fluorescent colors, respectively, were observed. A naked-eye detection for the three ions was documented. With the appearance of orange color, a mega Stokes shift of 175 nm was observed. The probe exhibited excellent selectivity and lower detection limits of 0.24 μM, 4.1 nM and 0.27 μM, and dynamic ranges of 0.0-2.0 μM, 0.0-0.05 μM and 0.0-2.0 μM for cyanide, hydrazine and hypochlorite, respectively. The sensing mechanism was investigated through computational studies before and after the addition of cyanide, hypochlorite, and hydrazine, applying density functional theory (DFT), along with the calculation of optical properties by time-dependent DFT (TD-DFT) method. The results were found to be in good agreement with the experimental values. Remarkably, the probe, TTB, successfully detected cyanide, hydrazine, and hypochlorite in complex water samples. Moreover, the detection of cyanide was successfully performed in apricot kernels, as well as hypochlorite in fruits and vegetables.

A novel perspective on the preventive treatment of hydrazine compound-induced liver injury: Isoniazid liver injury as an example

ETHNOPHARMACOLOGICAL RELEVANCE

Anethum graveolens L. (dill), which has been used as a medicine, spice and aromatic plant since ancient times, is not only a traditional Chinese medicines but also an important medicinal and functional food in Europe and Central and South Asia. In ethnomedicine, dill reportedly exerts a protective effect on the liver and has been widely used as a traditional medicine for the treatment of jaundice in the liver and spleen and inflammatory gout diseases in Saudi Arabia. Furthermore, studies have found that dill can regulate the NAT2 enzyme, and this plant was thus selected to study its alleviating effect on isoniazid liver injury.

AIM OF THE STUDY

The purpose of this study was to explore the effect of dill on alleviating liver injury induced by hydrazine compounds represented by isoniazid through the use of network pharmacology combined with in vivo and in vitro experimental verifications.

MATERIALS AND METHODS

First, we screened the key targets of dill in the treatment of liver injury through the use of network pharmacology; we then performed GO and KEGG pathway enrichment analyses using the DAVID database. We also verified the alleviative and anti-inflammatory effects of dill on isoniazid liver injury in rats by animal experiments. We further investigated the modulating effect of dill on the enzymatic activity of NAT2, a common metabolizing enzyme of hydrazine compounds.

RESULTS

A total of 111 key targets were screened through network pharmacology. In vivo experiments showed that dill reduced the amount of inflammatory factors produced by isoniazid, such as IL-10, IL-1β, TNF-α and IL-6, restored the levels of ALT, AST, r-GT, AKP and TBA in vivo, and attenuated isoniazid liver injury. Both in vivo and vitro results indicated that dill could regulate the expression of NAT2 enzymes.

CONCLUSIONS

The results tentatively demonstrate that dill can alleviate isoniazid liver injury through multiple components, targets and pathways and exerts a regulatory effect on the NAT2 enzyme, and these findings thus provide new ideas for subsequent studies on hydrazide liver injury--reducing the risk of hydrazide-induced liver injury through anti-inflammation and regulation of NAT2 enzymes.

Design of a sustainable light-up flavonol probe for dual-ratiometric fluorescent sensing and visual differentiating ammonia and hydrazine

Ammonia (NH₃) and hydrazine (N₂H₄) present potential risks to human health, food and environmental safety. A sustainable flavonol-based probe, quercetin pentaacetate (QPA, weak blue emission 417 nm), was fabricated for dual-ratiometric fluorescent sensing and visual differentiating NH₃ and N₂H₄. Excited state intramolecular proton transfer-on products with green (487 nm) and yellow (543 nm) emissions occurred as meeting with NH₃ and N₂H₄, respectively, for their different nucleophilicities. Such a promising response offered a great opportunity of QPA to discriminatively detect NH₃ and N₂H₄ with large Stokes shifts (>122 nm), high sensitivity (limit of detection: 35.4 μM and 0.70 ppm for NH₃ solution and gas; 0.26 μM for N₂H₄ solution), excellent accuracy (spiked recoveries from 98.6 % to 105 %), and superior selectivity. Importantly, QPA was utilized for monitoring NH₃ vapor in fish spoilage procedures and detecting N₂H₄ in water samples for food and environmental safety evaluation.

A dual-emission fluorescence probe for the detection of viscosity and hydrazine in environmental and biological samples

The microenvironments of biological systems are associated with the pathology of organisms. This study, aimed to construct a hemicyanine-based probe (1), which can respond to mitochondrial viscosity and hydrazine (N₂H₄), for imaging application in living cells and zebrafish. The probe showed no fluorescence due to the intramolecular rotation in the solution; however, it exhibited a strong emission at 730 nm when the molecules were restricted to a high-viscosity environment. The addition of N₂H₄ caused an elimination reaction of the N-substituted group in the pyridinium part and further broke the CC bond to produce a highly fluorescent hydrazone. Also, the probe could selectively and quantitatively detect N₂H₄ via the fluorescence enhancement at 510 nm in a concentration range of 0 μM-140μM, with the limit of detection being 0.0485 μM. This probe may be used to study diseases related to N₂H₄ and viscosity changes in biological systems. Furthermore, the analysis methods based on probe 1 for N₂H₄ detection in soil, water, and air samples were successfully established.

Naphthalene-based fluorescent probe for on-site detection of hydrazine in the environment

The widespread occurrence of hydrazine residues in the environment, including in water, soil, and organisms, is a potential health threat to humans. Therefore, the development of an efficient method for the detection of hydrazine in environmental samples is highly desirable although it poses a significant challenge. In this study, we designed and synthesized a series of naphthalene-based fluorescent dyes through structural engineering and developed a novel probe for hydrazine detection. The probe could provide a distinct fluorescence response toward hydrazine in aqueous solution with high sensitivity and selectivity. Moreover, paper-based test strips can be easily fabricated using this probe, enabling the portable on-site detection of hydrazine with the aid of a smartphone. Furthermore, we demonstrated that this probe is capable of recognizing hydrazine in various environmental samples, including water, soil, plants, and zebrafish embryos. This research provides a promising tool for the detection of hydrazine in the environment.

A flavonol-derived fluorescent probe for highly specific and sensitive detection of hydrazine in actual environmental samples and living zebrafish

Hydrazine (N₂H₄) is a significant chemical reagent and widely applied in industrial field, which can bring potential risk to environmental safety and human health due to its high toxicity and potential carcinogenicity. In this paper, a flavonol-derived fluorescent probe named TB-N₂H₄ was rationally developed for detecting N₂H₄ based on the excited intramolecular proton transfer (ESIPT) principle. TB-N₂H₄ exhibited a remarkable fluorescence turn-on response toward N₂H₄ with a large Stokes shift of 191 nm. Moreover, TB-N₂H₄ could selectively recognize N₂H₄ over other competitive analytes, and displayed high sensitivity toward N₂H₄ with a low detection limit of 0.117 μM. The sensing mechanism of the probe TB-N₂H₄ for N₂H₄ was confirmed by theoretical calculation and HRMS analysis. This probe was able to quantitatively determine N₂H₄ in environmental water and soil samples. Additionally, TB-N₂H₄ was also successfully utilized for real-time tracking of the distribution of N₂H₄ in living zebrafish.

Sonochemically-Induced Reduction of Alkenes to Alkanes with Ammonia

With the progressive defossilization of our industry, hydrogen (H₂ ) has been identified as a central molecule to store renewable electricity. In this context, ammonia (NH₃ ) is now rapidly emerging as a promising hydrogen carrier for the future. This game change indirectly impacts the field of fine chemistry where hydrogenation reactions are widely deployed. In particular, the possibility of performing hydrogenation reactions using ammonia directly instead of hydrogen has become highly desirable but it remains a very difficult scientific task, which we address in this communication. Here we show that the N-H bond of NH₃ can be cleaved within cavitation bubbles, generated by ultrasonic irradiation at a high frequency, leading to the in situ formation of a diimide, which then induces the hydrogenation of alkenes. Advantageously, this work does not involve any transition metal and releases N₂ as a sole co-product.

Reaction of 7α-bromo-6-nitrocholest-5-enes with hydrazine: Formation of steroidal pyrazolines and molecular docking against SARS-CoV-2 omicron protease

The present work reports simple and effective protocol for preparing 6α-nitro-5α-cholestano[7α,5-cd] pyrazolines (4-7) by the reaction of 7α-bromo-6-nitrocholest-5-enes (1-3) with hydrazine hydrate under reflux [the substrate (2) gave products (5) and (6) and the later on acetylation with AC₂O/Py gave (7)]. In the case of reaction of 3β-hydroxy analogue (3) with hydrazine, however, 6α-nitro-5α-cholestano [3α,5-cd] pyrazoline (8) and 6α-nitro-3β, 5-oxido-5β-cholestane (9) were obtained. The probable mechanism of the formation of pyrazolines has also been outlined. In the current pandemic coronavirus disease 2019 scenario, the in-silico study was performed with reactants (1-3), their products (4-9) against SARS-CoV-2 omicron protease (PDB ID:7T9L) for knowing significant interactions between them. Docking results give information that both reactants and products have binding energies ranges from -5.7 to 7.7 kcal/mol and strong interactions with various hydrophilic and hydrophobic amino acids such as ASP, PRO, PHE, SER and LEU which are significant residues playing important role in SARS-CoV-2 Omicron main protease (Mpro).

Recent advances in metal-based nanoporous materials for sensing environmentally-related biomolecules

Highly sensitive, stable, selective, efficient, and short reaction time sensors play a substantial role in daily life/industry and are the need of the day. Due to the rising environmental issues, nanoporous carbon and metal-based materials have attracted significant attention in environmental analysis owing to their intriguing and multifunctional properties and cost-effective and rapid detection of different analytes by sensing applications. Environmental-related issues such as pollution have been a significant threat to the world. Therefore, it is necessary to fabricate highly promising performance-based sensor materials with excellent reliability, selectivity and good sensitivity for monitoring various analytes. In this regard, different methods have been employed to fabricate these sensors comprising metal, metal oxides, metal oxide carbon composites and MOFs leading to the formation of nanoporous metal and carbon composites. These composites have exceptional properties such as large surface area, distinctive porosity, and high conductivity, making them promising candidates for several versatile sensing applications. This review covers recent advances and significant studies in the sensing field of various nanoporous metal and carbon composites. Key challenges and future opportunities in this exciting field are also part of this review.

A hemicyanine-based near-infrared fluorescent probe for vapor-phase hydrazine detection and bioimaging in a complete aqueous media

A novel near-infrared fluorescent probe CyOE based on hemicyanine dye containing acetyl as a recognition site is reported. The probe CyOE shows high selectivity and sensitivity (LOD = 82 nM, 2.58 ppb), as well as good water solubility and quantitative detectability of hydrazine in the concentration range of 0-75 μM (R² = 0.993). Moreover, CyOE has a significant increase in fluorescence at 735 nm with the addition of N₂H₄, which provides a rapid, colorimetric and gas-phase detection method for N₂H₄ in both aqueous solution and real water samples. In addition, CyOE is successfully utilized to visualize hydrazine in cells with low cytotoxicity and high cell permeability.

A dual-ratiometric mitochondria-targeted fluorescent probe to detect hydrazine in soil samples and biological imaging

Hydrazine (N₂H₄) is carcinogenic, extremely toxic, and induces serious environmental contamination and physiological dysfunction; however, it is widely used as an industrial material. Hence, the development of a simple and effective analytical method to detect N₂H₄ detection in both environmental and biological sectors is warranted. In this work, an intramolecular charge transfer (ICT)-based fluorescent probe 1, namely (Z)- 1-(4-acetoxybenzyl)- 4-(1-cyano-2-(7-(diethylamino)- 2-oxo-2 H-chromen-3-yl)vinyl)pyridin-1-ium, was designed for dual-excitation (420 and 600 nm, excitation separations >160 nm), near infrared (NIR)-emissive, and ratiometric fluorescent detection of N₂H₄. The sensing behavior of probe 1 for N₂H₄ detection was shown to be available over a wide pH range, and detection limits of 68 nM and 569 nM were achieved at excitation wavelengths of 420 and 600 nm, respectively. In addition, probe 1 was successfully used to image mitochondrial N₂H₄ in living cells and zebrafish. Furthermore, the probe was also capable of determining hydrazine signals in test strips and environmental soil.

Evaluation of anti-malarial potency of new pyrazole-hydrazine coupled to Schiff base derivatives

Background

The search for pharmacologically effective agents among molecules bearing multiple functionalities is commonly practiced. In continuation of the search for new anti-malarial agents, new pyrazole-hydrazine coupled Schiff-base derivatives previously synthesized were screened for anti-malarial property.

Methods

Here, in vivo prophylactic and curative activities of the compounds were assessed while their binding affinity for falcipain-2, a crucial enzyme in Plasmodium survival, was done using computational techniques.

Results

The two derivatives (BepINH and BepBeH) respectively led to a significant (p < 0.05) reduction in parasitaemia count (0.76 ± 1.11 and 0.79 ± 1.19) at day 3 post-treatment relative to the negative control (16.37 ± 1.25). For the prophylactic study, it was observed that the highest parasitaemia suppression level of 95.35% and 95.17% for BepINH and BepBeH at 15 mg/kg was slightly comparable to that obtained for ACT-Lonart (99.38%). In addition, their haematological profiles indicate that they are potentially beneficial in suppressing haemolytic damage to RBC, thereby protecting the body against infection-induced anaemia. Docking calculations on the derivatives toward the Plasmodium falciparum falcipain-2 revealed that they favourably interacted with a binding affinity higher than that of a known cocrystallized inhibitor.

Conclusion

This study confirms the relevance of multi-functional molecules in the search for new and effective anti-plasmodial agent and lay the foundation for further development of these compound series to potent anti-plasmodial agent that interacts with falcipain-2.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12936-022-04266-8.

A novel mitochondria-targetable NIR fluorescent probe for monitoring intracellular hypobromous acid levels

The development of ultrasensitive in situ detection techniques for monitoring hypobromous acid (HBrO) levels in the biological systems is of great significance to reveal its complex pathological and physiological effects. A simple mitochondria-targetable hydrazine-based near-infrared (NIR) fluorescent probe (Mito-NIR) for detecting HBrO in the mitochondria of live cells is presented in this paper. Probe Mito-NIR displays the ultrafast (< 5 s) response for HBrO. It can detect HBrO with high sensitivity. Additionally, it shows high selectivity towards HBrO over other biologically important substances. Finally, it can monitor the changes of endogenous/exogenous HBrO levels in the mitochondria of live cells. A simple mitochondria-targetable NIR fluorescent probe with picomolar sensitivity for HBrO was developed to specifically track mitochondrial HBrO.

Comparison of inhibitory roles on nitrite-oxidizing bacteria by hydroxylamine and hydrazine during the establishment of partial nitrification

The inhibitory roles of hydroxylamine (NH₂OH) and hydrazine (N₂H₄) on nitrite-oxidizing bacteria were investigated in a comparative study. The results showed that nitrite accumulation was achieved by adding 5 mg-N/L NH₂OH or N₂H₄ to two parallel sequencing batch reactors, with nitrite accumulation rate reaching 95.83% and 86.58% within 15 days after adopting aeration time control, respectively. Correspondingly, the maximum level of NO in typical cycles caused by NH₂OH addition was 0.18 mg-N/L, which was higher than obtained for N₂H₄. NH₂OH or N₂H₄ showed strong inhibition on Nitrospira and promoted the enrichment of Nitrosomonas, with the effects of NH₂OH being more significant. However, nitritation began to deteriorate after the cessation of inhibitors addition. In conclusion, NH₂OH was a better inhibitor than N₂H₄ for Nitrospira. The inhibitory role of NH₂OH was primarily related to NO toxicity, while for N₂H₄ it was attributed to its own toxicity, with NO playing a smaller role.

A ratiometric fluorescent probe with large Stokes shift and emission shift for sensing hydrazine in living organisms

As a highly toxic reagent, hydrazine (N₂H₄) is notorious to human beings and the environment. To simply and conveniently detect N₂H₄ in environmental and biological systems, a ratiometric fluorescent probe MA-N₂H₄ was developed with excellent sensitivity and selectivity. Probe MA-N₂H₄ was readily prepared based on a naphthalene as the fluorescent scaffold and an indanedione group as the responsive moiety for N₂H₄. This probe displayed a red-emitting fluorescence at 670 nm with a large Stokes shift (200 nm). After treatment with N₂H₄, a significant blue-shifted emission at 440 nm could be observerd, which led to an extremely large emission wavelength shift (230 nm). The fluorescent intensity ratio (I₄₄₀/I₆₇₀) of probe MA-N₂H₄ was rapidly and significantly increased (273-fold) within 18 min. The detection limit for N₂H₄ was 0.5 µM. In addition, the probe was successfully employed for tracking N₂H₄ in living cells and zebrafish through a ratiometric manner.

Evaluation of long-term preservation and reactivation efficiency of anaerobic ammonium oxidation (anammox) microorganisms based on activation energy

The preservation efficiency of mainstream (M-ANA) and sidestream anaerobic ammonium oxidation (anammox) (S-ANA) were evaluated based on their activation energy (E_a). The E_a of M-ANA cultivated under low nitrogen loads was lower than that of S-ANA, which greatly contributed to enhancing the viability of anammox during preservation at 4 °C. After preservation for 140 d, the decay rate (b_AN) of M-ANA ranged from 0.0012 to 0.0013/d; the b_AN of S-ANA was 0.0036-0.0041/d. The addition of hydrazine, which requires minimal energy to activate anammox metabolism, is highly beneficial for the viability of microorganisms. The low E_a of anammox contributes to efficient reactivation with rapid reactivation of heme c, and the addition of hydrazine makes the process more beneficial. Although the specific nitrogen removal rate of the M-SNA seed sludge was much lower than that of S-ANA, the rate of M-ANA became higher after 48 days of reactivation.

Ratiometric fluorescence chemodosimeter for hydrazine in aqueous solution and gas phase based on Quinoline-Malononitrile

The widespread use of Hydrazine (N₂H₄) in many areas of the chemical industry, brings potential risks to human health and environmental pollution. To detect N₂H₄ effectively, a simple ratio fluorescence probe (QMM), designed and synthesized through Vilsmeier reaction and Knoevenagel reaction, was prepared for the specific response of N₂H₄ based on the irreversible chemical reaction. The ratiometric fluorescence chemodosimeter displayed a response for hydrazine with high selectivity, sensitivity and anti-interference ability. The measured detection limit is 38.30 nm (0.122 ppb), which is far lower than the maximum allowable level of the U.S. Environmental Protection Agency (10 ppb). Moreover, test paper and TLC plates loading QMM had been made, which could be utilized to detect hydrazine both in aqueous solution samples and in gas phase samples. Thus QMM could serve as an easily manufactured, low-cost, efficient and portable solid-state optical probe to detect hydrazine in field measurements.

A dual-response fluorescent probe for discriminative sensing of hydrazine and bisulfite as well as intracellular imaging with different emission

Bisulfite and hydrazine are harmful to the environment safety and human health. Therefore, it is of great value to develop a smart fluorescent probe with high selectivity for detection of bisulfite and hydrazine. In our report, a dual-response fluorescent probe EDBI with high selectivity, rapid response, and low detection limit for discriminative determination HSO₃^- and N₂H₄ was exploited. The probe EDBI is capable of distinctive sensing HSO₃^- and N₂H₄ based on nucleophilic addition reactions by taking advantage of ratiometric fluorescence and fluorescence "on-off" mode, respectively. The dual-responses behaviors of probe EDBI toward HSO₃^- and N₂H₄ were attribute to different reaction sites, which it has been confirmed by HRMS. More importantly, cytotoxicity experiment authenticated that probe possesses low toxicity and good penetration. The probe EDBI with excellent performance, it was successfully employed to distinguishable sense HSO₃^- and N₂H₄ in living cells by diverse channel patterns. Therefore, this simple dual-response fluorescence probe is expected to be used for real-time monitoring bisulfite and hydrazine in biological samples.

Different metal-decorated aluminum phosphide nanotubes as hydrazine sensors for biomedical applications

B3LYP, B97D, and M06-2X density functionals are utilized for probing the effect of decorating X (X = Co, Ti, Sc, or Ca) metals on the sensing performance of an aluminum phosphide nanotube (AlPNT) in detecting the hydrazine (HZ) gas. We predict that the interaction of pristine AlPNT with HZ is physisorption, and our calculated sensing response (SR) of AlPNT is approximately 2.7. The adsorption energy of HZ changes from - 4.6 to - 21.0, - 21.9, - 22.4, and - 23.8 kcal/mol by decorating the Co, Ti, Sc, and Ca metals into the AlPNT surface, respectively. Also, Co, Ti, Sc, and Ca rise the SR to 22.5, 36.8, 50.4, and 89.0, respectively, indicating that by increasing the atomic radius of metals, the sensitivity is more increased. So, we concluded that Ca much more increases the sensitivity of AlPNT toward HZ. Our calculations demonstrate that the electrostatic interaction has the main contribution in the formation of HZ/X decorated AlPNT (X@AlPNT) complexes. The expected recovery time is 22.0 s for the HZ desorption from the Ca@AlPNT at 298 K. Finally, we found that all of the X@AlPNTs have superior sensing performance toward HZ compared to the X@carbon nanotubes.

Novel ratiometric fluorescent probe based on internal reference and its detection of hydrazine

In this work, dual-emissive ratiometric fluorescent system was constructed by the introduction of an ideal internal reference. By virtue of its unique alkalinity, N₂H₄ could undergo a hydrazinolysis reaction with the ester group of F1, inducing remarkable fluorescence enhancement while the blue fluorescence of the internal reference DPA remained constant. Consequently, the fluorescence intensity ratios (I₅₄₀/I₄₄₀) were proportional to the concentrations of N₂H₄, which was beneficial for the exactly quantitative detection. The skillful strategy granted the sensing system advantages such as relative good solubility in aqueous media, easy-to-design, simple synthesis, large emission shift, good ratiometric response, as well as the successful application in real water samples and cell imaging.

A novel colorimetric and ratiometric fluorescence probe based on 'C-CN' for detection of hydrazine and its imaging in living cells and mouse

Hydrazine plays an important role in chemistry, pharmaceuticals, agriculture and aerospace. However, it is not to be underestimated and has been identified as harmful to the human body. Therefore, it is significant and urgent to develop the detection of hydrazine in vivo and in vitro. Here, the probe TAN was synthesized by using benzothiazole derivatives as the fluorophore and 2,3-diaminomaleonitrile as the identified group to detect hydrazine. The presence of hydrazine resulted in a colorimetric and ratiometric fluorescence response of the probe based on the formation of hydrazone. The detection limit of TAN was 0.31 µM for hydrazine. In addition, the probe TAN was successfully used to visualize hydrazine in living HepG-2 cells and mouse with low cytotoxicity and excellent biocompatibility.

Development of a ratiometric fluorescent probe with large Stokes shift and emission wavelength shift for real-time tracking of hydrazine and its multiple applications in environmental analysis and biological imaging

As a tremendously noxious and extensively utilized chemical reagent, hydrazine (N₂H₄) has become a serious threat to ecosystem and human health. Thus, it is desirable to exploit an efficient method for real-time tracking of hydrazine. Here, a novel ratiometric fluorescent probe PBQ-AB for hydrazine was rationally constructed from isolongifolanone. This probe displayed an extremely large Stokes shift of 230 nm and could selectively recognize hydrazine in the presence of other competitive species within an extremely short time ( 40 s). PBQ-AB also displayed some fascinating merits in the detection of hydrazine, including low detection limit (48 nM), wide pH range (5-12), excellent photostability (>240 min), and well-resolved emission wavelength shift (148 nm). Moreover, this probe was utilized to fabricate a ready-to-use electrospinning nanofibrous membrane for convenient detection of hydrazine vapor by virtue of smartphone. Furthermore, PBQ-AB was capable of determining hydrazine contaminant in environmental soil and water samples. Additionally, its favorable performance for detecting hydrazine was successfully demonstrated in live HeLa cells as well as in live Arabidopsis thaliana tissues, manifesting its promising application for labeling hydrazine in living systems. Therefore, we believed that this probe has great potential in environmental analysis and health supervision.

Electrocatalytically active cuprous oxide nanocubes anchored onto macroporous carbon composite for hydrazine detection

Cuprous oxide (Cu₂O) is a p-type semiconductor with excellent catalytic activity and stability that has gained much attention because it is non-toxic, abundant, and inexpensive. Porous carbon materials have large specific surface areas, which offer abundant electroactive sites, enhance the electrical conductivity of materials, and prevent the aggregation of Cu₂O nanocubes. In this study, a composite with high electrocatalytic activity was prepared based on Cu₂O nanocubes anchored onto three-dimensional macroporous carbon (MPC) by a simple, eco-friendly, and cheap method for hydrazine detection. Due to the synergistic effect of MPC and Cu₂O, the sensor exhibited high electrocatalytic activity, sensitivity, better selectivity, and low limit of detection. The resulting sensor could be a sensitive and effective platform for detecting hydrazine and promising practical applications.

Sensing for hydrazine of a pyrene chalcone derivative with acryloyl terminal group

Hydrazine, as a toxic substance, seriously endangers human health and the environment. Based on the excellent luminescent properties and low biological toxicity of pyrene derivatives, combing with chalcone derivatives easily attacked by nucleophilic group, a pyrene derivative PCA decorated by acryloyl terminal group as fluorescent probe for hydrazine was developed. The compound shows fluorescent peak red shift and intensity enhancement with increasing solvent polarity from hexane (459 nm) to methanol (561 nm). Based on strong fluorescence emission in methanol, methanol-HEPES mixed solution was used as the solvent in the spectral recognition experiments. The probe exhibits fluorescent change from yellow fluorescence (576 nm) to blue fluorescence (393 nm) with 800-fold ratiometric fluorescence enhancement (I_393nm/I_576nm) after the reaction with hydrazine. The probe can recognize hydrazine in fast response rate with kinetic constant calculated being 2.7 × 10^-3 s^-1 and 15 min as response time. The probe also can monitor hydrazine in real water samples and various soils.

A novel bifunctional-group salamo-like multi-purpose dye probe based on ESIPT and RAHB effect: Distinction of cyanide and hydrazine through optical signal differential protocol

A novel bifunctional-group multi-purpose dye probe p-TNS has been designed and synthesized. The probe p-TNS has unique excited-state intramolecular proton transfer (ESIPT) and resonance-assisted hydrogen bonding (RAHB) coupled system, was confirmed to detect cyanide and hydrazine by blocking the ESIPT effect. Cyanide can change the fluorescence of the solution from bright green to orange-red (116 nm Stokes shift), while hydrazine causes the bright green fluorescence to be quenched. The recognition mechanism of the probe p-TNS to CN^- and N₂H₄ was proposed reasonably through spectral characterizations and theoretical calculations. Combined with theoretical calculations, it was speculated that the solvent dependence may be caused by the ICT effect in the molecule. The probe p-TNS could be prepared into test strips for the detection of cyanide and hydrazine. In addition, the probe molecule can also be used to detect trace amounts of cyanide in agricultural products, and respond to gaseous hydrazine by direct contact, indicating that the probe p-TNS has good practical application prospects. Therefore, this molecular framework provides a new way of thinking about detecting multiple target substances.