1
|
MnO 2 superstructure cathode with boosted zinc ion intercalation for aqueous zinc ion batteries. J Colloid Interface Sci 2024; 669:723-730. [PMID: 38735254 DOI: 10.1016/j.jcis.2024.05.052] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2024] [Revised: 04/19/2024] [Accepted: 05/08/2024] [Indexed: 05/14/2024]
Abstract
The simultaneous intercalation of protons and Zn2+ ions in aqueous electrolytes presents a significant obstacle to the widespread adoption of aqueous zinc ion batteries (AZIBs) for large-scale use, a challenge that has yet to be overcome. To address this, we have developed a MnO2/tetramethylammonium (TMA) superstructure with an enlarged interlayer spacing, designed specifically to control H+/Zn2+ co-intercalation in AZIBs. Within this superstructure, the pre-intercalated TMA+ ions work as spacers to stabilize the layered structure of MnO2 cathodes and expand the interlayer spacing substantially by 28 % to 0.92 nm. Evidence from in operando pH measurements, in operando synchrotron X-ray diffraction, and X-ray absorption spectroscopy shows that the enlarged interlayer spacing facilitates the diffusion and intercalation of Zn2+ ions (which have a large ionic radius) into the MnO2 cathodes. This spacing also helps suppress the competing H+ intercalation and the formation of detrimental Zn4(OH)6SO4·5H2O, thereby enhancing the structural stability of MnO2. As a result, enhanced Zn2+ storage properties, including excellent capacity and long cycle stability, are achieved.
Collapse
|
2
|
Continuous and controllable synthesis of MnO 2 adsorbents for H 2S removal at low temperature. JOURNAL OF HAZARDOUS MATERIALS 2024; 471:134402. [PMID: 38688216 DOI: 10.1016/j.jhazmat.2024.134402] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/06/2024] [Revised: 04/15/2024] [Accepted: 04/23/2024] [Indexed: 05/02/2024]
Abstract
H2S is an extremely noxious impurity generated from nature and chemical industrial processes. High performing H2S adsorbents are required for chemical industry and environmental engineering. Herein, α-, γ-, and δ-MnO2 adsorbents with high sulfur capacity were synthesized through a continuous-flow approach with a microreactor system, achieving much higher efficiency than hydrothermal methods. The relationship between crystal structure and synthesis conditions such as residence time, reaction temperature, concentration of K+ in solution and reactant ratio is discussed. According to the H2S breakthrough tests at 150 °C, continuously prepared α-, γ-, and δ-MnO2 exhibited sulfur capacities of 669.5, 193.8 and 607.6 mg S/g sorbent, respectively, which was at a high level among the reported adsorbents. Such enhanced performance is related to the large surface area and mesopore volume, high reducibility, and a large number of oxygen species with high reactivity and mobility. Manganese sulfide and elemental sulfur were formed after desulfurization, which indicated the reaction consisted of two steps: redox and sulfidation of the sorbents. This study provides an innovative design strategy for the construction of nanomaterials with high H2S adsorption performances.
Collapse
|
3
|
A novel green synthesis of MnO 2-Coal composite for rapid removal of silver and lead from wastewater. WATER RESEARCH 2024; 256:121526. [PMID: 38583333 DOI: 10.1016/j.watres.2024.121526] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Revised: 03/19/2024] [Accepted: 03/25/2024] [Indexed: 04/09/2024]
Abstract
The presence of Ag(I) and Pb(II) ions in wastewater poses a significant threat to human health in contemporary times. This study aims to explore the development of a novel and economical adsorbent by grafting MnO2 particles onto low-rank coal, providing an innovative solution for the remediation of water contaminated with silver and lead. The synthesized nanocomposites, referred to as MnO2-Coal, underwent thorough characterization using FTIR, XRD, BET, and SEM to highlight the feasibility of in-situ surface modification of coal with MnO2 nanoparticles. The adsorption of Ag(I) and Pb(II) from their respective aqueous solution onto MnO2-Coal was systematically investigated, with optimization of key parameters such as pH, temperature, initial concentration, contact time, ionic strength, and competing ions. Remarkably adsorption equilibrium was achieved within a 10 min, resulting in impressive removal rates of 80-90 % for both Ag(I) and Pb(II) at pH 6. The experimental data were evaluated using Langmuir, Freundlich, and Temkin isotherm models. The Langmuir isotherm model proved to be more accurate in representing the adsorption of Ag(I) and Pb(II) ions onto MnO2-Coal, exhibiting high regression coefficients (R2 = 0.99) and maximum adsorption capacities of 93.57 and 61.98 mg/g, along with partition coefficients of 4.53 and 71.92 L/g for Ag(I) and Pb(II), respectively, at 293 K. Kinetic assessments employing PFO, PSO, Elovich, and IPD models indicated that the PFO and PSO models were most suitable for adsorption mechanism of Pb(II) and Ag(I) on MnO2-Coal composites, respectively. Moreover, thermodynamic evaluation revealed the spontaneous and endothermic adsorption process for Ag(I), while exothermic behavior for adsorption of Pb(II). Importantly, this approach not only demonstrates cost-effectiveness but also environmental friendliness in treating heavy metal-contamination in water. The research suggests the potential of MnO2-Coal composites as efficient and sustainable adsorbents for water purification applications.
Collapse
|
4
|
Interpretation of adsorption isotherm and kinetics behind fluorene degradation. CHEMOSPHERE 2024; 357:141797. [PMID: 38537713 DOI: 10.1016/j.chemosphere.2024.141797] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2023] [Revised: 12/26/2023] [Accepted: 03/23/2024] [Indexed: 04/29/2024]
Abstract
The gradual release of slow-degrading polycyclic aromatic hydrocarbons into the environment creates a high level of threat to aquatic and terrestrial life worldwide. Remediation of these PAHs should be designed in such a way that it poses as few or no environmental hazards as possible. In our study, we examined the degradation ability of the synthesized MnO2 nanoparticles against fluorene. The MnO2 nanoparticle prepared was found to be spherical from the SEM analysis. XRD analysis confirms the average crystallite size as 31.8652 nm. Further, the characterization of nanoparticles was confirmed by UV-DRS, FT-IR, DLS, and HPLC techniques. The extent of adsorption potential of the synthesized nanoparticles was established from the batch adsorption studies and the kinetic and isotherm model was interpreted. The antimicrobial properties of the synthesized MnO2 nanoparticles were analyzed.
Collapse
|
5
|
Cisplatin-loaded mesoporous polydopamine nanoparticles capped with MnO 2 and coated with platelet membrane provide synergistic anti-tumor therapy. Int J Pharm 2024; 656:124093. [PMID: 38583822 DOI: 10.1016/j.ijpharm.2024.124093] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2023] [Revised: 03/26/2024] [Accepted: 04/05/2024] [Indexed: 04/09/2024]
Abstract
A multifunctional nanoplatform was constructed in this work, with the goal of ameliorating the challenges faced with traditional cancer chemotherapy. Cisplatin (CP) was loaded into mesoporous polydopamine (mPDA) nanoparticles (NPs) with a drug loading of 15.8 ± 0.1 %, and MnO2 used as pore sealing agent. Finally, the NPs were wrapped with platelet membrane (PLTM). P-selectin on the PLTM can bind to CD44, which is highly expressed on the tumor cell membrane, so as to improve the targeting performance of the NPs. In addition, the CD47 on the PLTM can prevent the NPs from being phagocytosed by macrophages, which is conducive to immune escape. The final PLTM-CP@mPDA/MnO2 NPs were found to have a particle size of approximately 198 nm. MnO2 is degraded into Mn2+ in the tumor microenvironment, leading to CP release from the pores in the mPDA. CP both acts as a chemotherapy agent and can also increase the concentration of H2O2 in cells. Mn2+ can catalyze the conversion of H2O2 to OH, resulting in oxidative damage and chemodynamic therapy. In addition, Mn2+ can be used as a contrast agent in magnetic resonance imaging (MRI). In vitro and in vivo experiments were performed to explore the therapeutic effect of the NPs. When the concentration of CP is 30 μg/mL, the NPs cause approximately 50 % cell death. It was found that the PLTM-CP@mPDA/MnO2 NPs are targeted to cancerous cells, and in the tumor site cause extensive apoptosis. Tumor growth is thereby repressed. No negative off-target side effects were noted. MRI could be used to confirm the presence of the NPs in the tumor site. Overall, the nano-platform developed here provides cooperative chemotherapy and chemodynamic therapy, and can potentially be used for effective cancer treatment which could be monitored by MRI.
Collapse
|
6
|
MnO 2 porous carbon composite from cellulose enabling high gravimetric/volumetric performance for supercapacitor. Int J Biol Macromol 2024; 261:129977. [PMID: 38316321 DOI: 10.1016/j.ijbiomac.2024.129977] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Revised: 01/22/2024] [Accepted: 02/02/2024] [Indexed: 02/07/2024]
Abstract
Preparing electrode material integrated with high gravimetric/volumetric capacitance and fast electron/ion transfer is crucial for the practical application. Owing to the structural contradiction, it is a big challenge to construct electrode material with high packing density, sufficient ion transport channels, and fast electronic transfer pathways. Herein, MnO2 porous carbon composite with abundant porous structure and 3D carbon skeleton was facilely fabricated from Linum usitatissimum. L stems via NaOH activation and MnO2 introduction. The in-situ introduced MnO2 not only increases the packing density and the electrical conductivity of the porous carbon but also provides more active sites for oxidation reactions. These unique characteristics endow the resultant MnO2 porous carbon composite with remarkable gravimetric capacitance of 549 F g-1, volumetric capacitance of 378 F cm-3, and capacitance retention of 54.9 %. Giving the simple process and low cost, this work might offer a new approach for structural design and the practical application of high-performance electrode materials.
Collapse
|
7
|
Selective removal of thallium from water by MnO 2-doped magnetic beads: Performance and mechanism study. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 353:120147. [PMID: 38325278 DOI: 10.1016/j.jenvman.2024.120147] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Revised: 12/22/2023] [Accepted: 01/15/2024] [Indexed: 02/09/2024]
Abstract
Aqueous thallium has posed an increasing threat to environment as human's intensified activities in mining, refining, process and discharge. Remediation on thallium pollution has been of up-most importance to water treatment. In present work, MnO2 and magnetic Fe3O4 have been implanted to sodium alginate (SA) in presence of carboxyl methyl cellulose (CMC), and the resultant beads consisted of SA/CMC/MnO2/Fe3O4 were characterized. The materials were applied to treatment of Tl-contaminated water as adsorbent in lab. The removal results revealed that the adsorption capacity reached 38.8 mg (Tl)·g (beads)-1 and almost 100 % removal efficiency was achieved. The residual Tl was below 0.1 μg·L-1, meeting the discharge standard regulated in China. The kinetic adsorption was better described as a pseudo-second-order and three-step intra-particle diffusion model. Freundlich isotherm was well fitted the experimental data. The absorbent shown an excellent competitive specificity (KTl/M: ∼104!) over common hazardous ions Cu2+, Cd2+, Co2+, Pb2+ and Cr3+, as well as naturally abundant K+ and Na+ (KTl/M: 10-102) in mimic environmental conditions. Regeneration and reusability of the absorbent was also verified by five absorption-desorpotion cycles. XPS results revealed that a redox reaction between Mn4+ with Tl+, and an ion exchange of H+ (-O-Fe) and Tl+ were assumed to be main process for the specific capturing. This study provided an efficient SA/CMC/MnO2/Fe3O4 composite beads that could be a promising adsorbent for Tl-polluted water treatment.
Collapse
|
8
|
Photoelectrochemical sensor for histone deacetylase Sirt1 detection based on Z-scheme heterojunction of CuS-BiVO 4 photoactive material and the cyclic etching of MnO 2 by NADH. Talanta 2024; 268:125307. [PMID: 37866306 DOI: 10.1016/j.talanta.2023.125307] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2023] [Revised: 10/09/2023] [Accepted: 10/12/2023] [Indexed: 10/24/2023]
Abstract
A novel photoelectrochemical (PEC) biosensor was constructed for histone deacetylase Sirt1 detection based on the Z-Scheme heterojunction of CuS-BiVO4 and reduced nicotinamide adenine dinucleotide (NADH) induced cyclic etching of MnO2 triggered by Sirt1 enzyme catalytic histone deacetylation event. Based on the Z-Scheme heterojunction, the photoactivity of the CuS-BiVO4 was improved greatly due to the highly effective separation of the photogenerated electron-hole pairs. In the presence of MnO2 nanosheets on the CuS-BiVO4/ITO electrode surface, the photocurrent decreased due to the inhibition effect of MnO2. However, this inhibition effect was eliminated by the incubation of MnO2/CuS-BiVO4/ITO with NADH, where NADH was produced in the deacetylation process of acetylated peptide catalyzed by Sirt1 with NAD+. The formed NADH etched MnO2, resulting in an increased photocurrent. In this process, NADH was oxidized to produce NAD+, which further involved the deacetylation process. Based on this cycle, the photocurrent of the biosensor was improved greatly and the sensitive and selective detection of Sirt1 was achieved. The biosensor presented a wide linear range from 0.005 to 10 nM with the low detection limit of 3.38 pM (S/N = 3). In addition, the applicability of the developed method was evaluated by investigating the effect of sodium butyrate and perfluorohexane sulfonate on Sirt1 activity.
Collapse
|
9
|
The relative contributions of Mn(III) and Mn(IV) in manganese dioxide polymorphs to bisphenol A degradation. JOURNAL OF HAZARDOUS MATERIALS 2024; 461:132596. [PMID: 37757556 DOI: 10.1016/j.jhazmat.2023.132596] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2023] [Revised: 09/03/2023] [Accepted: 09/19/2023] [Indexed: 09/29/2023]
Abstract
Polymorphs of MnO2 comprise Mn(III) and Mn(IV), which are both strong oxidants capable of BPA degradation, but their relative contributions are unclear. To advance process understanding, the reactivities of biogenic MnO2 prepared using Roseobacter sp. AzwK-3b and synthetic MnO2 (i.e., hexagonal and triclinic birnessite) toward BPA were compared. Both colloidal and particulate biogenic MnO2, as well as triclinic birnessite, showed insignificant reactivity towards BPA, but degradation did occur when pyrophosphate (PP), a ligand for Mn(III), was present. Despite higher Mn(III) content of triclinic birnessite (38.6 %), only hexagonal birnessite with an Mn(III) content of 30.4 % degraded BPA without PP, and no rate increases were observed following the addition of PP. Similarly, colloidal MnO2 degraded BPA with nearly double the rate measured with particulate MnO2 (i.e., 1.24 ± 0.10 versus 0.73 ± 0.08 h-1), even though the Mn(III) contents were only 10 % different. The Mn(III) release rates from each MnO2 polymorph in the presence of PP correlated more strongly with the observed BPA degradation rates than with Mn(III) content, suggesting that both Mn(III) release rate and Mn(III) content govern MnO2-mediated BPA degradation. In natural settings, Mn(III) generally occurs in complexed form suggesting that laboratory testing should include ligands to derive environmentally relevant information about MnO2-mediated degradation of BPA and other compounds of concern.
Collapse
|
10
|
Robust iron-doped manganese oxide nanoparticles from facile fabrication to photo-catalytic degradation application of binary dyes mixture. ENVIRONMENTAL RESEARCH 2024; 240:117384. [PMID: 37858685 DOI: 10.1016/j.envres.2023.117384] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/10/2023] [Revised: 10/07/2023] [Accepted: 10/11/2023] [Indexed: 10/21/2023]
Abstract
The manganese oxide (MnO2 and iron-doped manganese oxide (Fe-MnO2) nanoparticles (NPs) with reduced band gap (Eg) were fabricated through the co-precipitation process. They used to degrade Indigo Carmine (IC) and Rhodamine B (RB) binary mixture in an aqueous medium under solar light irradiation. From FT-IR, the twisting modes of the Mn-O bond and the stretching vibrations of the Fe-Mn-O2 bond were confirmed from the peaks observed at 480 cm-1,584 cm-1,675 cm-1, and 900 cm-1, 1150 cm-1, and 1200 cm-1 respectively. The MnO2 has an optical band gap of 3.2 eV, which was decreased to 3 eV in Fe-MnO2. The zero charge (PZC) point was 8 for Fe-MnO2 and 7 for MnO2. The BET surface area for Fe-MnO2 was 398 m2/g, relatively higher than MnO2 particles, having a surface area of 384 m2/g. The average crystallite sizes calculated from Scherer formulae were 37 nm for MnO2 and 31 nm for Fe-MnO2 NPs. SEM confirmed the irregular morphology of the prepared particles. It was analyzed that agglomeration occurs in MnO2 than the Fe-MnO2. The maximum degradation of IC dye was 99%, and that of RB was 98% at the optimum conditions. The data were best fitted to second-order kinetics.
Collapse
|
11
|
Laser-induced transient conversion of rhodochrosite/polyimide into multifunctional MnO 2/graphene electrodes for energy storage applications. J Colloid Interface Sci 2024; 653:606-616. [PMID: 37738933 DOI: 10.1016/j.jcis.2023.09.083] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 09/07/2023] [Accepted: 09/11/2023] [Indexed: 09/24/2023]
Abstract
Laser-induced graphene (LIG) has been extensively investigated for electrochemical energy storage due to its easy synthesis and highly conductive nature. However, the limited charge accumulation in LIG usually leads to significantly low energy densities. In this work, we report a novel strategy to directly transform natural rhodochrosite into ultrafine manganese dioxide (MnO2) nanoparticles (NPs) in the polyimide (PI) substrate for high-performance micro-supercapacitors (MSCs) and lithium-ion batteries (LIBs) through a scalable and cost-effective laser processing method. Specifically, laser treatment on rhodochrosite/polyimide precursors induces the thermal explosion, which splits rhodochrosite (10 μm) into MnO2 NPs (12-16 nm) on the carbon matrix of LIG due to the sputtering effect. Benefiting from largely exposed active sites from the ultrafine MnO2 and the synergetic effect from highly conductive LIG, the MnO2/LIG MSCs show a high specific capacitance of 544.0 F g-1 (154.3 mF cm-2; 14.16 F cm-3) at 3 A/g and 82.1% capacitance retention after 10,000 cycles at 5A/g, in contrast to pure LIG (<100 F g-1). Moreover, the MnO2/LIG-based LIBs show the highest reversible discharge capacity of ∼1097 mAh g-1 at 0.2 A/g and ∼ 866.4 mAh g-1 at 1.0 A/g. This study opens a new route for synthesizing novel LIG-based composites from natural minerals.
Collapse
|
12
|
Sustainable production of Fe-doped MnO 2 nanoparticles for accelerated tetracycline antibiotic detoxification. CHEMOSPHERE 2023; 344:140353. [PMID: 37797898 DOI: 10.1016/j.chemosphere.2023.140353] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2023] [Revised: 09/05/2023] [Accepted: 10/02/2023] [Indexed: 10/07/2023]
Abstract
Manganese dioxide (MnO2) has been recognized as one of the natural systems' most active mineral oxidants. However, when it comes to catalytic oxidation of antibiotic applications, pure MnO2 falls short in delivering satisfactory performance. Hence, a set of Fe3+-doped porous MnO2 (0.02Fe-MnO2, 0.1Fe-MnO2, and 0.14Fe-MnO2) nanoparticles were synthesized here via a convenient and energy-efficient one-step reaction method. A series of experiments revealed that Fe-doping strategy enhances the properties of MnO2 host by suppressing the crystalline structure, increasing the amount of surface oxygen defects, and modifying the Mn3+/Mn4+ ratio. Specifically, the tetracycline (TC) removal efficiency of 0.14Fe-MnO2 reaches 92% without the need for any additional co-oxidant, representing a 20% improvement over pristine MnO2 nanoparticles. Moreover, this process shows a fast dynamic (achieving 70% of TC removal in just 5 min) and demonstrates pH-resistance, maintaining high TC removal efficiency (≥90%) over a wide pH range of 3.0-9.0. Mechanical studies reveal that the degradation of TC can be attributed to the oxidation by reactive oxygen radicals and Mn3+, with 1O2 being the primary radical involved in the reaction, accounting for 55% of TC removal. Importantly, cytotoxicity testing indicates that the biotoxicity of TC toward organisms can be effectively mitigated using 0.14Fe-MnO2 nanomaterial. This study presents a readily applicable candidate for economically and conveniently eliminating of environmental TC pollution, thereby reducing the threat posed by TC pollution to the ecosystem.
Collapse
|
13
|
Synthesis and fabrication of segregative and durable MnO 2@chitosan composite aerogel beads for uranium(VI) removal from wastewater. WATER RESEARCH 2023; 247:120819. [PMID: 37931357 DOI: 10.1016/j.watres.2023.120819] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2023] [Revised: 10/21/2023] [Accepted: 10/30/2023] [Indexed: 11/08/2023]
Abstract
To address the imperative need for efficient removal of uranium-containing wastewater and mitigate radioactive contamination risks associated with nuclear energy, the development of materials with high removal efficiency and facile separation is crucial. This study designed and synthesised MnO2@chitosan (CTS) composite aerogel beads by in-situ growing δ-MnO2 on porous CTS aerogel beads. This approach not only mitigates the agglomeration of MnO2 nanospheres but also significantly enhances the porous structure and surface area of MnO2@CTS. These cost-effective and eco-friendly millimeter-scale spherical aerogels exhibited convenient separation properties after adsorption. These characteristics help mitigate the risk of equipment seam blockage and secondary pollution that are often associated with powdered adsorbents. Additionally, MnO2@CTS exhibited remarkable mechanical strength (stress approximately 0.55 MPa at 60 % strain), enabling rapid separation and easy regeneration while maintaining high adsorption performance even after five cycles. Significantly, MnO2@CTS exhibited a maximum adsorption capacity of 410.7 mg/g at pH 6 and 298 K, surpassing reported values for most CTS/MnO2-based adsorbents. The chemisorption process of U(VI) on MnO2@CTS followed the pseudo-second-order kinetic and Dubinin-Radushkevish models. X-ray photoelectron spectroscopy analysis further confirmed the reduction of U(VI) to U(V/IV). These findings highlight the substantial potential of MnO2@CTS aerogel beads for U(VI) removal from aqueous solutions, positioning them as a promising solution for addressing U(VI) contamination in wastewater.
Collapse
|
14
|
Controlled synthesis of Fe 3O 4/MnO 2 (3 1 0)/ZIF-67 composite with enhanced synergetic effects for the highly selective and efficient adsorption of Cu (II) from simulated copperplating effluents. ENVIRONMENTAL RESEARCH 2023; 237:116940. [PMID: 37619624 DOI: 10.1016/j.envres.2023.116940] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/13/2023] [Revised: 08/03/2023] [Accepted: 08/18/2023] [Indexed: 08/26/2023]
Abstract
This study designed a composite material with internal synergistic effects among multiple components to achieve highly selective adsorption of Cu (II). Through controlled synthesis, the Fe3O4/MnO2(3 1 0)/ZIF-67 composite was successfully fabricated, leading to significant improvement in adsorption selectivity, capacity, and adsorption rate. The experimental results showed that the composite is of outstanding selectivity in the adsorption of Cu (II), with a partition coefficient K of Cu (II) that was 2.2-5.3 times higher than that of other coexisting ions. Moreover, the composite exhibited a remarkable adsorption capacity of 1261.0 mg g-1 and a fast adsorption rate of 840.7 mg g-1 h-1 at 298 K. Additionally, its magnetic property facilitated easy separation from wastewater, thereby enhancing its potential for commercial applications. The synergetic effect mechanism was analyzed through characterizations and DFT calculations. Furthermore, the recyclability of the composite was investigated, which showed that after seven cycles, the adsorption efficiency remained at 85% of its initial efficiency. It can be concluded that Fe3O4/MnO2(3 1 0)/ZIF-67 has potential to address challenges posed by heavy metal pollution in copperplating effluents.
Collapse
|
15
|
Selective abatement of electron-rich organic contaminants by trace complexed Mn(II)-catalyzed periodate via high-valent manganese-oxo species. JOURNAL OF HAZARDOUS MATERIALS 2023; 460:132447. [PMID: 37677971 DOI: 10.1016/j.jhazmat.2023.132447] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/27/2023] [Revised: 08/29/2023] [Accepted: 08/30/2023] [Indexed: 09/09/2023]
Abstract
Mn(II) is among the most efficient catalysts for the periodate (PI)-based oxidation process. In-situ formed colloidal MnO2 simultaneously serves as the catalyst and oxidant during the degradation of organic contaminants by PI. Here, it is revealed that the complexation of Mn(II) by ethylene diamine tetraacetic acid (EDTA) further enhances the performance of PI-based oxidation in the selective degradation of organic contaminants. As evidenced by methyl phenyl sulfoxide probing, 18O-isotope labeling, and mass spectroscopy, EDTA complexation modulates the reaction pathway between Mn(II) and PI, triggering the generation of high-valent manganese-oxo (MnV-oxo) as the dominant reactive species. PI mediates the single-electron oxidation of Mn(II) to Mn(III), which is stabilized by EDTA complexation and then further oxidized by PI via the oxygen-atom transfer step, ultimately producing the MnV-oxo species. Ligands analogous to EDTA, namely, [S,S]-ethylenediaminedisuccinic acid and L-glutamic acid N,N-diacetic acid, also enhances the Mn(II)/PI process and favors MnV-oxo as the dominant species. This study demonstrates that functional ligands can tune the efficiency and reaction pathways of Mn(II)-catalyzed peroxide and peroxyacid-based oxidation processes.
Collapse
|
16
|
Insight into the electron transfer regime of periodate activation on MnO 2: The critical role of surface Mn(IV). JOURNAL OF HAZARDOUS MATERIALS 2023; 454:131479. [PMID: 37104949 DOI: 10.1016/j.jhazmat.2023.131479] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2023] [Revised: 04/19/2023] [Accepted: 04/22/2023] [Indexed: 05/19/2023]
Abstract
At present, the potential mechanism of manganese oxide (MnO2) activation of PI and the key active sites of PI activation are still unclear and controversial. To this end, three different crystal forms of MnO2 were prepared in this study and used to activate PI to degrade pollutants. The results showed that different crystal types of MnO2 showed different catalytic abilities, and the order was γ-MnO2 > α-MnO2 > β-MnO2. Through quenching experiments, EPR tests, Raman experiments and in situ electrochemical experiments, it has been confirmed that electron transfer-mediated non-free radical process is the main mechanism of pollutant degradation, in which the active substance is the highly active metastable intermediate complex (MnO2/PI*). Hydroxyl radical (HO•), superoxide radical (O2•-), singlet oxygen (1O2) and iodine radical (IO3•) did not participate in pollutant degradation. The quantitative structure-activity relationship analysis confirmed that the catalytic performance of MnO2 was highly positively correlated with the surface Mn(IV) content, which indicated that the surface Mn(IV) site was the main active site. Overall, this study will be of great help to the design and application of manganese dioxide activation for periodate degradation of pollutants.
Collapse
|
17
|
A smartphone-assisted ratiometric colorimetric and fluorescent probe for triple-mode determination of nitrite based on MnO 2 nanoparticles and carbon quantum dots. Food Chem 2023; 410:135151. [PMID: 36623463 DOI: 10.1016/j.foodchem.2022.135151] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2022] [Revised: 12/01/2022] [Accepted: 12/01/2022] [Indexed: 12/12/2022]
Abstract
A triple-mode colorimetric and fluorescent sensing scheme based on manganese dioxide nanoparticles (MnO2NPs) and carbon quantum dots (CQDs) were developed to determine nitrite. MnO2NPs can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into a blue oxidation product (TMBox), which is further oxidized into a yellow diimine derivative by nitrite. The ratio of absorbance at 652 nm to 452 nm was monitored as signal response for UV-vis detection mode. A "turn-off" CQDs fluorescence probe was also constructed for fluorescent detection mode. Smartphone tool kit was used to capture the color of sample for smartphone-based measurement. Various analytical performance under different detection modes were obtained and compared. The proposed methods were applied to food samples with satisfactory recoveries (83.3-106 %). The results were validated with AOAC standard spectrophotometric method. The current triple-mode detection were accurate, convenient, low-cost and fast for analyzing nitrite in foods and water samples on-site.
Collapse
|
18
|
Mn(III)-mediated bisphenol a degradation: Mechanisms and products. WATER RESEARCH 2023; 235:119787. [PMID: 36917870 DOI: 10.1016/j.watres.2023.119787] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/15/2022] [Revised: 02/20/2023] [Accepted: 02/21/2023] [Indexed: 06/18/2023]
Abstract
Bisphenol A (BPA) is a high production volume chemical with potential estrogenic effects susceptible to abiotic degradation by MnO2. BPA transformation products and reaction mechanisms with MnO2 have been investigated, but detailed process understanding of Mn(III)-mediated degradation has not been attained. Rapid consumption of BPA occurred in batch reaction vessels with 1 mM Mn(III) and 63.9 ± 0.7% of 1.76 ± 0.02 μmol BPA was degraded in 1 hour at circumneutral pH. BPA was consumed at 1.86 ± 0.09-fold higher rates in vessels with synthetic MnO2 comprising approximately 13 mol% surface-associated Mn(III) versus surface-Mn(III)-free MnO2, and 10-35% of BPA transformation could be attributed to Mn(III) during the initial 10-min reaction phase. High-resolution tandem mass spectrometry (HRMS/MS) analysis detected eight transformation intermediates in reactions with Mn(III), and quantum calculations proposed 14 BPA degradation products, nine of which had not been observed during MnO2-mediated BPA degradation, suggesting mechanistic differences between Mn(III)- versus MnO2-mediated BPA degradation. The findings demonstrate that both Mn(III) and Mn(IV) can effectively degrade BPA and indicate that surface-associated Mn(III) increases the reactivity of synthetic MnO2, offering opportunities for engineering more reactive oxidized Mn species for BPA removal.
Collapse
|
19
|
Development of in-situ electrochemical heavy metal ion sensor using integrated 1D/0D/1D hybrid by MWCNT and CQDs supported MnO 2 nanomaterial. ENVIRONMENTAL RESEARCH 2023; 225:115570. [PMID: 36868450 DOI: 10.1016/j.envres.2023.115570] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2022] [Revised: 10/23/2022] [Accepted: 02/22/2023] [Indexed: 06/18/2023]
Abstract
An integrated 1D/0D/1D hybrid nanomaterial was prepared from MWCNT supported carbon quantum dots @ MnO2 nanomaterial for a sensitive and selective electrochemical heavy metal ion sensor by hydrothermal methods. The developed nanomaterials were characterized by various analytical methods such as FESEM, HRTEM, XRD, FTIR, EDX and elemental mapping study, and also its electrochemical properties of the prepared samples were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) analysis. Differential pulse voltammetry (DPV) analysis has been used to investigate the quantitative detection of heavy metal ions such as cadmium and chromium on modified electrodes under optimal conditions. The in-situ electrochemical sensitivity and selectivity of the samples were determined by varying various parameters, such as the concentration of heavy metal ions, different electrolytes and electrolyte pH. The observed DPV results show that prepared MWCNT (0.05 wt%) and CQD (0.1 wt%) supported MnO2 nanoparticles show effective detection response for chromium (IV) metal ion. In particular, 0D CQD, 1D MWCNT, and MnO2 hybrid nanostructures produced a synergistic effect among them, resulting in strong electrochemical performance of the prepared samples against the target metal ions.
Collapse
|
20
|
Trace N-doped manganese dioxide cooperated with Ping-pong chrysanthemum-like NiAl-layered double hydroxide on cathode for improving bioelectrochemical performance of microbial fuel cell. BIORESOURCE TECHNOLOGY 2023; 381:129139. [PMID: 37169200 DOI: 10.1016/j.biortech.2023.129139] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2023] [Revised: 04/28/2023] [Accepted: 05/04/2023] [Indexed: 05/13/2023]
Abstract
Trace N-doped manganese dioxide (MnO2) nanoparticles were attached to NiAl-layered double hydroxide (LDH) nano sheets by a simple two-step hydrothermal reaction, and N-MnO2@NiAl-LDH was successfully prepared as cathode catalyst of microbial fuel cell (MFC). N-MnO2@NiAl-LDH was Ping-pong chrysanthemum-like structure formed by overlapping lamellar structures, with spherical MnO2 particles attached on. The unique Ping-pong chrysanthemum-like structure and pore size distribution provided large number of electrochemical active sites. The recombination of trace N and MnO2 reduced the charge transfer resistance, accelerated the electron transfer rate, and N-MnO2@NiAl-LDH showed high oxygen reduction reaction (ORR) capability. The maximum output power density of N-MnO2@NiAl-LDH-MFC was 698 mW/m2, about 4.59 times of NiAl-LDH (152.1 mW/m2). The maximum voltage was about 320 mV, and the stability was good for about 7 d. This would provide technical reference for the utilization of cathode catalyst for fuel cells.
Collapse
|
21
|
Coupling Zn 2+ doping and rich oxygen vacancies in MnO 2 nanowire toward advanced aqueous zinc-ion batteries. J Colloid Interface Sci 2023; 645:400-409. [PMID: 37156148 DOI: 10.1016/j.jcis.2023.04.062] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2023] [Revised: 04/09/2023] [Accepted: 04/13/2023] [Indexed: 05/10/2023]
Abstract
Easy collapse of structure and sluggish reaction kinetics restrict the practical application of MnO2 in the field of aqueous Zn-ion batteries (ZIBs). To circumvent these obstacles, Zn2+ doping MnO2 nanowire electrode material with rich oxygen vacancies is prepared by one-step hydrothermal method combined with plasma technology. The experimental results indicate that Zn2+ doping MnO2 nanowire not only stabilizes the interlayer structure of MnO2, but also provide additional specific capacity as electrolyte ions. Meanwhile, plasma treatment technology induces the oxygen-deficient Zn-MnO2 electrode optimizing the electronic structure to improve the electrochemical behavior of the cathode materials. Especially, the optimized Zn/Zn-MnO2 batteries obtain outstanding specific capacity (546 mAh g-1 at 1 A g-1) and superior cycling durability (94% over 1000 continuous discharge/charge tests at 3 A g-1). Greatly, the H+ and Zn2+ reversible co-insertion/extraction energy storage system of Zn//Zn-MnO2-4 battery is further revealed by the various characterization analyses during the cycling test process. Further, from the perspective of reaction kinetics, plasma treatment also optimizes the diffusion control behavior of electrode materials. This research proposes a synergistic strategy of element doping and plasma technology, which has enhanced the electrochemical behaviors of MnO2 cathode and shed light on the design of the high-performance manganese oxide-based cathodes for ZIBs.
Collapse
|
22
|
Experimental and theoretical studies on NO selective catalytic oxidation over α-MnO 2. J Environ Sci (China) 2023; 126:396-407. [PMID: 36503766 DOI: 10.1016/j.jes.2022.04.006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 04/02/2022] [Accepted: 04/06/2022] [Indexed: 06/17/2023]
Abstract
Based on the experimental and theoretical methods, the NO selective catalytic oxidation process was proposed. The experimental results indicated that lattice oxygen was the active site for NO oxide over the α-MnO2(110) surface. In the theoretical study, DFT (density functional theory) and periodic slab modeling were performed on an α-MnO2(110) surface, and two possible NO oxidation mechanisms over the surface were proposed. The non-defect α-MnO2(110) surface showed the highest stability, and the surface Os (the second layer oxygen atoms) position was the most active and stable site. O2 molecule enhanced the joint adsorption process of two NO molecules. The reaction process, including O2 dissociation and O=N-O-O-N=O formation, was calculated to carry out the NO catalytic oxidation mechanism over α-MnO2(110). The results showed that NO oxidation over the α-MnO2(110) surface exhibited the greatest possibility following the route of O=N-O-O-N=O formation. Meanwhile, the formation of O=N-O-O-N=O was the rate-determining step.
Collapse
|
23
|
δ-MnO 2 decorated layered double oxides in-situ grown on nickel foam towards electrothermal catalysis of n-heptane. J Environ Sci (China) 2023; 126:308-320. [PMID: 36503759 DOI: 10.1016/j.jes.2022.03.017] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/26/2021] [Revised: 02/20/2022] [Accepted: 03/09/2022] [Indexed: 06/17/2023]
Abstract
Energy-saving and efficient monolithic catalysts are hotspots of catalytic purification of industrial gaseous pollutants. Here, we have developed an electrothermal catalytic mode, in which the ignition temperature required for the reaction is provided by Joule heat generated when the current flows through the catalyst. In this paper, Mn/NiAl/NF, Mn/NiFe/NF and Mn/NF metal-based monolithic catalysts were prepared using nickel foam (NF) as the carrier for thermal and electrothermal catalysis of n-heptane. The results indicated that Mn-based monolithic catalysts exhibit high activity in thermal and electrothermal catalysis. Mn/NiFe/NF achieve conversion of n-heptane more than 99% in electrothermal catalysis under a direct-current (DC) power of 6 W, and energy-saving is 54% compared with thermal catalysis. In addition, the results indicated that the introduction of NiAl (or NiFe) greatly enhanced the catalytic activity of Mn/NF, which attributed to the higher specific surface area, Mn3+/Mn4+, Ni3+/Ni2+, adsorbed oxygen species (Oads)/lattice oxygen species (Olatt), redox performance of the catalyst. Electrothermal catalytic activity was significantly higher than thermal catalytic activity before complete conversion, which may be related to electronic effects. Besides, Mn/NiFe/NF has good cyclic and long-term stability in electrothermal catalysis. This paper provided a theoretical basis for applying electrothermal catalysis in the field of VOCs elimination.
Collapse
|
24
|
Could manganate be an alternative of permanganate for micropollutant abatement? CHEMOSPHERE 2023; 321:138094. [PMID: 36758814 DOI: 10.1016/j.chemosphere.2023.138094] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/08/2023] [Revised: 01/27/2023] [Accepted: 02/07/2023] [Indexed: 06/18/2023]
Abstract
Permanganate (MnO4-), an oxidant that has been applied in water treatment, has highly varied reactivity toward pollutants. In this study, we found manganate (MnO42-) could destruct diverse functional groups, with oxidation rates being higher than that of permanganate under acidic and neutral conditions. Mechanistic study revealed manganate rapidly disproportionated to permanganate and colloidal MnO2 in solution. Under acidic conditions, the in-situ formed colloidal MnO2 possess higher reactivity than permanganate and primarily contributed to the degradation of pollutants. The reactivity of in-situ formed colloidal MnO2 is highly sensitive to pH and decreased dramatically with increasing pH. Consequently, the contribution of MnO2 to pollutant removal decreased with elevating pH, which also leads to the decreased degradation efficiency of micropollutants at high pH. Manganate is an intermediate produced during the manufacturing process of permanganate. This study indicates that manganate might be an alternative of permanganate for water purification under acidic and neutral conditions.
Collapse
|
25
|
Catalytic removal of toluene using MnO 2-based catalysts: A review. CHEMOSPHERE 2023; 318:137938. [PMID: 36702414 DOI: 10.1016/j.chemosphere.2023.137938] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Revised: 01/20/2023] [Accepted: 01/21/2023] [Indexed: 06/18/2023]
Abstract
Volatile organic compounds (VOCs) have serious hazard to human health and ecological environment. Due to its low cost and high activity, the catalytic oxidation technology considered to be the most effective method to remove VOCs. Toluene is one of the typical VOCs, hence its catalytic elimination is crucial for the regulation of VOCs. Manganese dioxide (MnO2) has been extensively studied for its excellent redox performance and low-temperature operation conditions. In this review, we summarize the research progresses in the toluene catalytic oxidation of MnO2-based catalysts, which contain single MnO2, metal-doped MnO2 and supported MnO2 catalyst. In particular, we pay much attention on the relationship between the chemical properties and toluene oxidation performance over MnO2 catalyst, as well as the catalytic reaction mechanisms. Moreover, the effects of different crystal forms and morphologies on the catalytic toluene reaction were discussed. And the perspective on MnO2 catalysts for the catalytic oxidation of toluene has been proposed. We expect that the summary of these important findings can serve as an important reference for the catalytic treatment of VOCs.
Collapse
|
26
|
Dissimilatory manganese reduction facilitates synergistic cooperation of hydrolysis, acidogenesis, acetogenesis and methanogenesis via promoting microbial interaction during anaerobic digestion of waste activated sludge. ENVIRONMENTAL RESEARCH 2023; 218:114992. [PMID: 36463988 DOI: 10.1016/j.envres.2022.114992] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/16/2022] [Revised: 11/20/2022] [Accepted: 11/30/2022] [Indexed: 06/17/2023]
Abstract
Anaerobic digestion (AD) of waste activated sludge (WAS) is commonly limited to poor synergistic cooperation of four stages including hydrolysis, acidogenesis, acetogenesis and methanogenesis. Dissimilatory metal reduction that induced by metal-based conductive materials is promising strategy to regulate anaerobic metabolism with the higher metabolic driving force. In this study, MnO2 as inducer of dissimilatory manganese reduction (DMnR) was added into WAS-feeding AD system for mediating complicated anaerobic metabolism. The results demonstrated that main operational performances including volatile solid (VS) degradation efficiency and cumulative CH4 production with MnO2 dosage of 60 mg/g·VS reached up to maximum 53.6 ± 3.4% and 248.2 ± 10.1 mL/g·VS while the lowest operational performances in control group (38.5 ± 2.8% and 183.5 ± 8.5 mL/g·VS) was originated from abnormal operation of four stages. Furthermore, high-throughput 16 S rRNA pyrosequencing revealed that enrichment of dissimilatory manganese-reducing contributors and methanogens such as Thermovirga, Christensenellaceae_R_7_group and Methanosaeta performed the crucial role in short-chain fatty acids (SCFAs) oxidation and final methanogenesis, which greatly optimized operational environment of hydrolysis, acidogenesis and acetogenesis. More importantly, analysis of functional genes expression proved that abundances of genes encoding enzymes participated in acetate oxidation, direct interspecies electron transfer (DIET) and CO2 reduction pathway were simultaneously up-regulated with the optimum MnO2 dosage, suggesting that DMnR with SCFAs oxidation as electron sink could benefit stable operation of four stages via triggering effective DIET-based microbial interaction mode.
Collapse
|
27
|
In-situ construction of binder-free MnO 2/MnSe heterostructure membrane for high-performance energy storage in pseudocapacitors. CHEMOSPHERE 2023; 313:137421. [PMID: 36455663 DOI: 10.1016/j.chemosphere.2022.137421] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/21/2022] [Revised: 11/11/2022] [Accepted: 11/26/2022] [Indexed: 06/17/2023]
Abstract
Manganese (Mn)-based oxides are considered suitable positive electrode materials for supercapacitors (SCs). However, their cycle stability and specific capacitance are significantly hindered by key restrictions such as structural instability and low conductivity. Herein, we demonstrated a novel nanorod (NR)-shaped heterostructured manganese dioxide/manganese selenide membrane (MnO2/MnSe) on carbon cloth (CC) (denoted as MnO2/MnSe-NR@CC) with a high aspect ratio by a straightforward and facile hydrothermal process. Experiments have demonstrated that doping selenium atoms to oxygen sites reduce electronegativity, increasing the intrinsic electronic conductivity of MnO2, decreasing electrostatic interactions with electrolyte ions, and thus boosting the reaction kinetics. Further, the selenium doping results in an amorphous surface with extensive oxygen defects, which contributed to the emergence of additional charge storage sites with pseudocapacitive characteristics. As expected, novel heterostructured MnO2/MnSe-NR@CC as an electrode for SC exhibits a high capacitance of 740.63 F/g at a current density of 1.5 A/g, with excellent cycling performance (93% capacitance retention after 5000 cycles). The MnO2/MnSe-NR@CC exhibited outstanding charge storage capability, dominating capacitive charge storage (84.6% capacitive at 6 mV/s). To examine the practical applications of MnO2/MnSe-NR@CC-ASC as a positive electrode, MnO2/MnSe-NR@CC//AC device was fabricated. The MnO2/MnSe-NR@CC//AC-ASC device performed exceptionally well, with a maximum capacitance of 166.66 F/g at 2 A/g, with a capacitance retention of 94%, after 500 GCD cycles. Additionally, it delivers an energy density of 75.06 Wh/kg at a power density of 1805.1 W/kg and maintains 55.044 Wh/kg at a maximum power density of 18,159 W/kg. This research sheds fresh information on the anionic doping method and has the potential to be applied to the synthesis of positive electrode materials for energy storage applications.
Collapse
|
28
|
Visualization the fixation of cadmium on manganese dioxide in sulfur reduction environments. JOURNAL OF HAZARDOUS MATERIALS 2023; 442:130022. [PMID: 36155303 DOI: 10.1016/j.jhazmat.2022.130022] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2022] [Revised: 09/14/2022] [Accepted: 09/16/2022] [Indexed: 06/16/2023]
Abstract
Manganese oxides as common soil components were considered as an important sink for the cadmium pollution, which, however, would be affected by the reductive sulfide introduced during the flooding period of paddy soil. In this study, the phase transitions caused by the reactions among S2-, MnO2 and Cd2+ were visualized by atomic force microscopy (AFM). The dissolution of MnO2 was in-situ studied by AFM in the S2-containing environments. Moreover, in the ternary system (S2-, MnO2 and Cd2+), the pre-adsorption of Cd2+ by the MnO2 nanosheets would promote the subsequent precipitation of CdS on the surface of MnO2, while the pre-formed CdS nanoparticles in the aquatic phase would tend to suspense rather than precipitating on MnO2. The kinetic study results indicated that the CdS crystallite generation rate was faster than the MnO2 dissolution rate in the aquatic environments with different sulfide contents. In the macroscopic Cd2+ fixation test, the introduction of S2- dramatically improved the fixation of the pre-adsorbed Cd2+ on the MnO2 nanosheets by forming the CdS precipitate. This study provided a fundamental understanding of the interactions among the S2-, MnO2 and Cd2+ ternary system and shed light on the development of Cd pollution remediation methods for paddy soils.
Collapse
|
29
|
Mechanistic and thermodynamic insights into the SO 2 oxidation on MnO 2 catalysts: A combined theoretical and experimental study. CHEMOSPHERE 2022; 307:135885. [PMID: 35926747 DOI: 10.1016/j.chemosphere.2022.135885] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/25/2022] [Revised: 06/27/2022] [Accepted: 07/27/2022] [Indexed: 06/15/2023]
Abstract
Manganese oxide (especially manganese dioxide [MnO2]) is an excellent catalytic material for SO2 removal in flue gas desulfurization. In this study, the effect of crystalline structure of MnO2 (α-MnO2, β-MnO2, γ-MnO2 and δ-MnO2) on their activity for SO2 oxidation was studied based on density functional theory with Hubbard U corrections (DFT + U). The calculated results showed that α-MnO2 has mild energy barriers of 0.69 eV and 0.46 eV, and β-MnO2 has poor redox performance on SO2 molecules, which has the highest energy barrier of 2.17 eV and the largest oxygen formation energy of 1.74 eV, making it difficult for the oxygen atom to remove from the surface lattice to form reactive sites. Thermodynamic calculations showed that α-MnO2 is suitable for SO2 oxidation for its low energy barriers, reaction energy close to zero in the first half, and relatively high spontaneity in the whole reaction. Experimental tests showed that α-MnO2 had the best catalytic oxidation effect, with the highest sulfur capacity (304.11 mg/g), but β-MnO2 had poor catalytic oxidation performance, with a sulfur capacity of 41.59 mg/g. This work studies the catalytic performance and mechanism of SO2 removal and proposes a strategy to improve the catalytic activity by phase structure.
Collapse
|
30
|
A rapid method for determining low concentrations of 210Pb in drinking water using MnO 2 fibers. JOURNAL OF ENVIRONMENTAL RADIOACTIVITY 2022; 253-254:107015. [PMID: 36113278 DOI: 10.1016/j.jenvrad.2022.107015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/21/2022] [Revised: 08/31/2022] [Accepted: 09/03/2022] [Indexed: 06/15/2023]
Abstract
A rapid method for determining low activity concentrations of 210Pb in drinking water was developed and tested. The method consists of a few stages for sample preparation that involve passing 12 L of water through a column with acrylic fibers implanted with MnO2 (used to adsorb 210Pb). The MnO2 fibers are oven-dried, compressed and measured by a broad-energy germanium detector used to quantify 210Pb via its characteristic 46.5 keV γ-ray. The time taken for sample preparation is approximately 4 h and recovery factors for lead in tap water of 87 ± 3% were achieved. After a measurement duration of 4 h, the minimum detectable activity concentration reaches 0.02 Bq/L for 210Pb, being well below the respective limit for drinking water in Israel (0.2 Bq/L) as well as the value recommended by the World Health Organization (0.1 Bq/L). Furthermore, a measurement duration of 48 h provides a minimum detectable activity concentration of ∼0.006 Bq/L, which is similar in magnitude to other, well-established methods that rely on lengthy and rather complex procedures. Thus, the combination of MnO2 fibers and gamma-ray spectrometry may be attractive for routine use by analytical laboratories that monitor radioactivity in drinking water.
Collapse
|
31
|
Understanding the nonradical activation of peroxymonosulfate by different crystallographic MnO 2: The pivotal role of Mn III content on the surface. JOURNAL OF HAZARDOUS MATERIALS 2022; 439:129613. [PMID: 35863233 DOI: 10.1016/j.jhazmat.2022.129613] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2022] [Revised: 06/14/2022] [Accepted: 07/13/2022] [Indexed: 06/15/2023]
Abstract
Manganese oxide-activated persulfate plays a critical role in water purification and in situ chemical oxidation processes, but the underlying mechanism needs to be further revealed. Herein, the detailed mechanism of MnO2 with various crystallographic structures (α-, β-, γ-, and δ-MnO2) towards peroxymonosulfate (PMS) activation was investigated. PMS activated by tunnel structured α-, β-, and γ-MnO2 showed higher acetaminophen (ACE) removal than layer structured δ-MnO2 with the removal efficiency following an order of α-MnO2 (85%) ≈ γ-MnO2 (84%) > β-MnO2 (65%) > δ-MnO2 (31%). Integrated with chemical quenching experiments, electron paramagnetic resonance, Raman spectra, X-ray photoelectron spectroscopy, and Langmuir-Hinshelwood model on kinetic data, both surface-bound PMS complexes and direct oxidation by surface manganese species (Mn(Ⅳ, Ⅲ)(s)) were disclosed as the dominant oxidation mechanism for ACE degradation in α-, β-, and γ-MnO2/PMS, which were rarely observed in previous reports. Moreover, the catalytic activity of α-, β-, and γ-MnO2 was positively correlated to the MnIII(s) content on the catalyst surface. Higher content of MnIII(s) would stimulate the generation of more oxygen vacancies, which was conducive to the adsorption of PMS and the formation of reactive complexes. Overall, this study might provide deeper insight into the nonradical activation mechanism of PMS over different crystallographic MnO2.
Collapse
|
32
|
Enhanced MnO 2 oxidation of methotrexate through self-sensitized photolysis. JOURNAL OF HAZARDOUS MATERIALS 2022; 438:129494. [PMID: 35792433 DOI: 10.1016/j.jhazmat.2022.129494] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Revised: 06/22/2022] [Accepted: 06/25/2022] [Indexed: 06/15/2023]
Abstract
MnO2, which is ubiquitous in soil and sediment in natural water environments, may play an important role in the photolysis of contaminants by sunlight, but the interactions between MnO2 and contaminants in aqueous environments under sunlight irradiation have not been investigated. In this study, the simultaneous presence of sunlight and MnO2 significantly enhanced the degradation efficiency of methotrexate (MTX). Accordingly, we hypothesized that the overall enhancement of this synergistic reaction is due to the additional production of Mn(III) via MTX self-sensitized photolysis. The pseudo-first-order kinetic model for the photoreaction of MTX with MnO2 (Light/MTX+MnO2) during the initial reaction kinetics (0-2 h) revealed a rate constant of 0.43 h1 ([MTX] = 20 μM, [MnO2] = 200 μM, and pH = 7), which is faster than that obtained with sunlight alone (0.14 h1) or MnO2 alone; Mn(II) and Mn(III) were formed at concentrations of 24.3 ± 1.0 μM and 14.8 ± 1.4 μM, respectively. Dissolved Mn(III) species were identified as the main oxidant species responsible for the degradation of MTX. Two reaction pathways for the production of Mn(III) through Light/MTX+MnO2 were proposed; MTX acts as a photosensitizer to produce 3MTX* responsible for the reduction of MnO2 to Mn(III), whereas O2• participates in the oxidation of Mn(Ⅱ) to Mn(Ⅲ). Byproduct analysis demonstrated that the Mn(III) generated in the Light/MTX+MnO2 system enhances C-N bond cleavage, ketonization, and hydrolysis pathways in the MTX transformation.
Collapse
|
33
|
Enhanced water-resistance of Mn-based catalysts for ambient temperature ozone elimination: Roles of N and Pd modification. CHEMOSPHERE 2022; 303:135014. [PMID: 35598789 DOI: 10.1016/j.chemosphere.2022.135014] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2022] [Revised: 05/12/2022] [Accepted: 05/16/2022] [Indexed: 06/15/2023]
Abstract
Cryptomelane-type MnO2 catalysts own excellent ozone (O3) decomposition performance. However, it is urgent to improve their long-term stability at ambient temperature, especially under the presence of water. In the present study, a modification strategy was proposed by N-doping and the successive Pd introduction. The N-doping of MnO2 by NH4Cl (NH4-MnO2) can increase its activity for O3 decomposition. And almost 100% O3 decomposition was achieved within 24 h under water-free atmosphere at ambient temperature (25 °C). Successive Pd addition further promoted the water-resistance of NH4-MnO2 catalyst under high humidity (RH > 90%). In combination with detailed characterizations, it indicated that the enhancements on stability and water-resistance were attributed to synergistic effect among acid sites, oxygen defects and Pd clusters. Finally, the decomposition mechanism of gaseous O3 was proposed based on three decisive active sites above.
Collapse
|
34
|
Catalytic ozonation of CH 2Cl 2 over hollow urchin-like MnO 2 with regulation of active oxygen by catalyst modification and ozone promotion. JOURNAL OF HAZARDOUS MATERIALS 2022; 436:129217. [PMID: 35739739 DOI: 10.1016/j.jhazmat.2022.129217] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/04/2022] [Revised: 05/10/2022] [Accepted: 05/20/2022] [Indexed: 06/15/2023]
Abstract
This paper firstly reported efficient catalytic ozonation of CH2Cl2 (dichloromethane, DCM) at low temperature over hollow urchin-like MnO2 with high chlorine resistance. Regulations on morphologies and Cu doping, as well as ozone promotion were conducted to optimize active oxygen of MnO2 catalysts, contributing to excellent catalytic behaviors. Cu doping MnO2 with hollow urchin-like morphology attained a stable 100% DCM conversion with O3/DCM molar ratio of 10 at 120 °C. The ozone utilization rate, final products, and byproducts distribution were discussed. Abundant crystal defects, low-valance Mn/Cu, Oads, and weak acidity, as well as better low temperature reducibility contributed to its superior performance. During DCM catalytic ozonation, DCM oxidation exhibited competitive effect on O3 decomposition due to the occupation of intermediates (CH2ClO3·, O-CH2Cl, and O-CH2 -O) over active sites that should belong to O3 originally. Nevertheless, O3 decomposition exhibited synergistic effects on DCM oxidation with promotion on active oxygen. Density functional theory (DFT) calculations confirmed the positive effect on oxygen vacancy formation and O3/DCM adsorption from Cu doping. The possible mechanism for DCM catalytic ozonation included four parts, including O3/DCM adsorption, O3 activation, DCM oxidation, and electron replenishment. This paper provides new insight for catalytic elimination of chlorinated alkanes at mild conditions.
Collapse
|
35
|
Self-locomotive, antimicrobial microrobot (SLAM) swarm for enhanced biofilm elimination. Biomaterials 2022; 287:121610. [PMID: 35696784 PMCID: PMC9763052 DOI: 10.1016/j.biomaterials.2022.121610] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2022] [Accepted: 05/29/2022] [Indexed: 12/20/2022]
Abstract
Biofilm is a major cause of infections and infrastructure deterioration, largely due to molecular diffusion restrictions that hamper the antimicrobial activity of traditional antibiotics and disinfectants. Here, we present a self-locomotive, antimicrobial microrobot (SLAM) swarm that can penetrate, fracture, and detach biofilm and, in turn, nullify bacterial resistance to antibiotics. The SLAM is assembled by loading a controlled mass of manganese oxide nanosheets on diatoms with the polydopamine binder. In hydrogen peroxide solution, SLAMs produce oxygen bubbles that generate thrust to penetrate the rigid and dense Pseudomonas aeruginosa biofilm and self-assemble into a swarm that repeatedly surrounds, expands, and bursts oxygen bubbles. The resulting cavities continue to deform and fracture extracellular polymeric substances from microgrooved silicone substrates and wounded skin explants while decreasing the number of viable bacterial cells. Additionally, SLAM allows irrigating water or antibiotics to access the residual biofilm better, thus enhancing the synergistic efficacy in killing up to 99.9% of bacterial cells.
Collapse
|
36
|
Novel sodium percarbonate-MnO 2 effervescent tablets for efficient and moderate membrane cleaning. WATER RESEARCH 2022; 220:118716. [PMID: 35687974 DOI: 10.1016/j.watres.2022.118716] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/27/2022] [Revised: 05/24/2022] [Accepted: 06/04/2022] [Indexed: 06/15/2023]
Abstract
Membrane flux recovery efficiency and durability are two key factors closely associated with the practical application for membrane cleaning process. However, conventional chemical membrane cleaning method by soaking the whole membrane module in highly concentrated chemical reagents has prominent drawbacks including the low mass transfer efficiency of reagents, long period of washing time, and the potential threat to membrane structure. Herein, for the first time, we report a facile approach to fabricate the sodium percarbonate-MnO2 effervescent tablets which show bubbling reaction to release oxygen and free radicals when being dispersed in water for membrane cleaning. Due to the synergistic effect of MnO2 and sodium percarbonate, the tablets are highly effective to clean the membrane fouled by humic acid within 5 min, with the terminal membrane flux being recovered from 0.50 to 0.95, and the irreversible fouling resistance being reduced by more than 90%, which is prominently more efficient than the conventional chemical cleaning methods. Moreover, even by consecutive membrane fouling and cleaning for 6 times, the membrane flux and filtration efficiency of the membrane could still be kept almost constant, and the moderateness of this membrane cleaning method was also verified by the systematic microscopic analysis. For mechanism study, results of Electron Spin Resonance (ESR) and quenching experiments indicated that the high-efficiency and robust durability of sodium percarbonate-MnO2 (SPC-MnO2) system for membrane cleaning was mainly attributed to the abundantly generated hydroxyl radicals and secondary free radicals (i.e. carbonate radicals). Conclusively, compared with the conventional membrane cleaning method with liquid cleaning reagents, the novel SPC-MnO2 system with remarkable advantages in terms of convenience and membrane cleaning performance demonstrated high potential for the wide application in practice.
Collapse
|
37
|
Facile preparation of MnO 2-TiO 2 nanotube arrays composite electrode for electrochemical detection of hydrogen peroxide. Talanta 2022; 244:123407. [PMID: 35366513 DOI: 10.1016/j.talanta.2022.123407] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2021] [Revised: 12/16/2021] [Accepted: 03/23/2022] [Indexed: 01/10/2023]
Abstract
The MnO2-TNTA composite electrodes were obtained through depositing MnO2 into TiO2 nanotube arrays (TNTA) by successive ionic layer adsorption reaction (SILAR) and subsequent hydrothermal method. The MnO2-TNTA nanocomposites were used as electrochemical sensors for the detection of hydrogen peroxide (H2O2). The preparation conditions of MnO2-TNTA electrodes and test conditions affect the electrochemical detection performance significantly. The optimal conditions are listed as follows: the number of SILAR cycles, 6 times; KMnO4 solution temperature, 50 °C; supporting electrolyte, 0.5 M NaOH. Under these conditions, the MnO2-TNTA electrode exhibits the best performance for detecting H2O2. The optimized MnO2-TNTA electrode has a minimum detection limit of 0.6 μM (S/N = 3) and a linear range of 5 μM ∼ 13 mM, which is much superior to the previously-reported electrodes. Moreover, the optimized MnO2-TNTA electrode possesses high selectivity, excellent stability and good reproducibility in the detection of H2O2. When used in the determination of H2O2 content in actual samples including disinfectant and milk, it also shows good accuracy, ideal recovery (96.00% ∼ 102.67%) and high precision (RSD < 4.0%).
Collapse
|
38
|
Tunnel manganese oxides prepared using recovered LiMn 2O 4 from spent lithium-ion batteries: Co adsorption behavior and mechanism. JOURNAL OF HAZARDOUS MATERIALS 2022; 425:127957. [PMID: 34915292 DOI: 10.1016/j.jhazmat.2021.127957] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/04/2021] [Revised: 10/30/2021] [Accepted: 11/28/2021] [Indexed: 06/14/2023]
Abstract
The purpose of this study was to investigate Cobalt (Co) removal from wastewater using synthesized manganese oxides from the recovered LiMn2O4. An efficient ultrasonication leaching method was utilized to recycle LiMn2O4 from spent lithium-ion batteries (LIBs). The recovered LiMn2O4 was used to synthesize tunnel λ-MnO2, γ-MnO2 and β-MnO2 by acid leaching and hydrothermal methods. Meanwhile, Li+ in the supernatant was recycled by the precipitation of Li3PO4. Subsequently, for the synthesized tunnel MnO2, various characterizations and sodium hydroxide titration in NaNO3 solution were performed. The effect of sorption studies presented the uptake of Co increased with the pH increasing from pH ~1 to pH ~8 and the isothermal sorption at pH ~6 showed that γ-MnO2 possessed the highest uptake amount 0.44 meq/g, and the highest distribution coefficient 2.5 × 105 mL/g. Moreover, γ-MnO2 was found without Mn3+/Mn2+ leached during the sorption process. The ion exchange-surface complexation model was adopted to study the titration, effect of pH and isotherm sorption on the ion exchange reaction mechanism of Co adsorption. Overall, this work provides an economically feasible and environmentally friendly method to recycle the spent LIBs and the γ-MnO2 synthesized from the recovered LiMn2O4 was proved to be promising adsorbents for Co removal.
Collapse
|
39
|
Peptide-mediated green synthesis of the MnO 2@ZIF-8 core-shell nanoparticles for efficient removal of pollutant dyes from wastewater via a synergistic process. J Colloid Interface Sci 2022; 608:2779-2790. [PMID: 34774323 DOI: 10.1016/j.jcis.2021.11.003] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2021] [Revised: 10/30/2021] [Accepted: 11/01/2021] [Indexed: 01/12/2023]
Abstract
The MnO2@ZIF-8 core-shell nanoparticles for highly efficient dye degradation have been synthesized with a green method. ZIF-8 crystals with controlled morphology and size are first synthesized by using peptide to modulate the crystal growth. MnO2 is then coated on ZIF-8 via in situ reaction. The surface MnO2 density can be controlled by the dosage of KMnO4. The MnO2@ZIF-8 nanoparticles work as photocatalyst to degrade rhodamine B in a Fenton-like process, giving a degradation ratio of > 96.0%. The degradation kinetics comply well with the Pseudo-second-order model and the experimental equilibrium data meet the Langmuir model best. The specific hierarchical structure of MnO2@ZIF-8 assures a synergistic enhancement of the catalytic degradation performance from several aspects. First, anchoring of the MnO2 nanoparticles on ZIF-8 allows their well disperse to provide more active surface area. Second, highly porous ZIF-8 can adsorb dye molecules to accumulate them at the surface reactive sites. Third, the MnO2/ZIF-8 nano-heterojunctions enhance charge carrier transfer and accelerate the production of free oxidative radicals. The study demonstrates a green method for fabrication of hierarchical hybrid structures, paving the way for designing novel photocatalysts with potential applications for wastewater treatment.
Collapse
|
40
|
The potential of Co 3O 4 nanoparticles attached to the surface of MnO 2 nanorods as cathode catalyst for single-chamber microbial fuel cell. BIORESOURCE TECHNOLOGY 2022; 346:126584. [PMID: 34929332 DOI: 10.1016/j.biortech.2021.126584] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/21/2021] [Revised: 12/12/2021] [Accepted: 12/14/2021] [Indexed: 06/14/2023]
Abstract
A simple two-step hydrothermal method was used to prepare the cathode catalyst of microbial fuel cell (MFC). MnO2@Co3O4 composite was successfully prepared by in-situ growth of nano-particle-like Co3O4 on nano-rod-like MnO2. The hybrid products had (121), (310), (311), (400) and (511) crystal planes, rod-like and point-like structures were observed. MnO2@Co3O4 nanohybrids were rich in a variety of metallic elements and provided rich electrochemically active sites. The maximum voltage of MnO2@Co3O4-MFC was 425 mV, the maximum stabilization time was 4 d. The maximum output power was 475 mW/m2, which was 2.24 times that of Co3O4-MFC (212 mW/m2) and 2.63 times of MnO2-MFC (180 mW/m2). The rod-like structure of MnO2 could effectively improve the ion flow efficiency and reduce the transfer resistance, and the point-like structure of Co3O4 can increase the specific surface area of the complex and provide more active sites.
Collapse
|
41
|
Catalytic ozonation of VOCs at low temperature: A comprehensive review. JOURNAL OF HAZARDOUS MATERIALS 2022; 422:126847. [PMID: 34416698 DOI: 10.1016/j.jhazmat.2021.126847] [Citation(s) in RCA: 58] [Impact Index Per Article: 29.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/23/2021] [Revised: 07/31/2021] [Accepted: 08/04/2021] [Indexed: 06/13/2023]
Abstract
VOCs abatement has attracted increasing interest because of the detrimental effects on both atmospheric environment and human beings of VOCs. The assistance of ozone has enabled efficient VOCs removal at low temperature. Thereby, catalytic ozonation is considered as one of the most feasible and effective methods for VOCs elimination. This work systematically reviews the emerging advances of catalytic ozonation of different VOCs (i.e., aromatic hydrocarbons, oxygenated VOCs, chlorinated VOCs, sulfur-containing VOCs, and saturated alkanes) over various functional catalysts. General reaction mechanism of catalytic ozonation including both Langmuir-Hinshelwood and Mars-van-Krevelen mechanisms was proposed depending on the reactive oxygen species involving the reactions. The influence of reaction conditions (water vapor and temperature) is fully discussed. This review also introduces the enhanced VOCs oxidation via catalytic ozonation in the ozone-generating systems including plasma and vacuum ultraviolet. Lastly, the existing challenges of VOCs catalytic ozonation are presented, and the perspective of this technology is envisioned.
Collapse
|
42
|
Novel functional separator with self-assembled MnO 2 layer via a simple and fast method in lithium-sulfur battery. J Colloid Interface Sci 2022; 606:666-676. [PMID: 34418754 DOI: 10.1016/j.jcis.2021.08.062] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/22/2021] [Revised: 08/01/2021] [Accepted: 08/08/2021] [Indexed: 11/27/2022]
Abstract
Modifying separator with metal oxides has been considered as a strong strategy to inhibit the shuttling of soluble polysulfide in the lithium-sulfur battery (Li-S battery). Manganesedioxide (MnO2), one kind of transition metal oxide, is widely applied to decorate the PP (Polypropylene) separator. However, the fabrication by physical coating is always multistep and complicated. Here, we design a simple and fast method to chemically decorate separator. Based on the oxidizing property of acidic KMnO4 solution, the PP separator was oxidized and an ultrathin self-assembled MnO2 layer was directly constructed on one side of separator, by immersing in acidic KMnO4 solution for only 1 h. The self-assembled MnO2 layer has the synergistic effect of adsorption and catalytic conversion on polysulfides, which can effectively inhibit the shuttle effect. It can also help battery to maintain excellent electrochemical kinetics in the electrochemical cycle and maintain the effective recycling of active substances. As a result, the shuttling of polysulfide is greatly prohibited by this novel functional separator, and cycling stability is outstandingly improved, with a low-capacity decaying of 0.058% after 500 cycles at 0.5C. The rapid and simple modification method proposed in this study has a certain reference value for the future large-scale application of lithium-sulfur battery.
Collapse
|
43
|
Rapid removal of chloramphenicol via the synergy of Geobacter and metal oxide nanoparticles. CHEMOSPHERE 2022; 286:131943. [PMID: 34426266 DOI: 10.1016/j.chemosphere.2021.131943] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2021] [Revised: 07/31/2021] [Accepted: 08/17/2021] [Indexed: 06/13/2023]
Abstract
The wide use of chloramphenicol and its residues in the environments are an increasing threat to human beings. Electroactive microorganisms were proven with the ability of biodegradation of chloramphenicol, but the removal rate and efficiency need to be improved. In this study, a model electricigens, Geobacter metallireducens, was supplied with and Fe3O4 and MnO2 nanoparticles. Five times higher chloramphenicol removal rate (0.71 d-1) and two times higher chloramphenicol removal efficiency (100%) was achieved. Fe3O4 and MnO2 nanoparticles highly increased the current density and NADH-quinone oxidoreductase expression. Fe3O4 nanoparticles enhanced the expression of alcohol dehydrogenase and c-type cytochrome, while MnO2 nanoparticles increased the transcription of pyruvate dehydrogenase and Type IV pili assembly genes. Chloramphenicol was reduced to a type of dichlorination reducing product named CPD3 which is a benzene ring containing compound. Collectively, Fe3O4 and MnO2 nanoparticles increased the chloramphenicol removal capacity in MFCs by enhancing electron transfer efficiency. This study provides new enhancing strategies for the bioremediation of chloramphenicol in the environments.
Collapse
|
44
|
Novel manganese cycling at very low ionic strengths in the Columbia River Estuary. WATER RESEARCH 2021; 207:117801. [PMID: 34741899 DOI: 10.1016/j.watres.2021.117801] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2021] [Revised: 10/19/2021] [Accepted: 10/21/2021] [Indexed: 06/13/2023]
Abstract
Mixing of waters of different ionic strengths induces the geochemical cycling of reactive elements. The most reactive zone is where the gradient in ionic strength is steepest. In oxygenated systems, the redox-active metal manganese cycles between soluble and particulate fractions through three oxidation states, manganese(II), manganese(III) and manganese(IV). This cycling strongly affects the mobility of inorganic and organic chemicals. The most accessible environmental system where waters with different ionic strengths mix are estuaries. During six Eulerian studies in the Columbia River Estuary, each up to 26 h, we measured manganese speciation and concentration across a salinity (SP) gradient centred around SP = 0.06-6, equivalent to a seawater ionic strength (ISp) of 1.2-120 mM. This zone, representing the region between freshwater and the more intensively studied estuarine turbidity maximum, presents a highly dynamic geochemical environment in which the manganese cycle propagates through four steps as ISp increases due to mixing: 1. Before a measurable change in ISp, manganese, as particulate manganese(III/IV) oxides (MnOx), undergoes reduction, independent of photochemical processes, to soluble manganese(III) stabilized in organic complexes (Mn(III)-L) and manganese(II); 2. As ISp increases between 5 and 80 mM, Mn(III)-L reduction continues and manganese(II) adsorbs onto particle surfaces; 3. As ISp increases further, though remaining below 80 mM (SP ≈ 4), adsorbed manganese(II) desorbs and/or is oxidized and is released as Mn(III)-L or oxidises further to MnOx; 4. The breakdown of Mn(III)-L complexes leads to higher manganese(II) and MnOx, which at Mid-Estuary-Salinities (ISp = 320-480 mM) precipitates. This manganese cycling in low ISp waters directly affects a system's redox chemistry and provides a window into understanding the extensive, yet hidden, freshwater/saline water interface in aquifers, soils, sediments and estuaries.
Collapse
|
45
|
In situ loading MnO 2 onto 3D Aramid nanofiber aerogel as High-Performance lead adsorbent. J Colloid Interface Sci 2021; 600:403-411. [PMID: 34023701 DOI: 10.1016/j.jcis.2021.05.048] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2021] [Revised: 05/06/2021] [Accepted: 05/09/2021] [Indexed: 11/26/2022]
Abstract
Fabricating a high-performance adsorbent as a desirable candidate for removing Pb2+ from aqueous water remains a challenge. Aramid nanofibers (ANFs) are promising building blocks that have realized multifunctional applications due to their intrinsic mechanical and chemical stability. Herein, an in situ loading strategy for preparing nanofiber composite aerogel was proposed by assembling ANFs into a 3D aerogel and applying it as host media for the in situ polymerization of pyrrole followed by facile redox reaction between the polypyrrole (PPy) and MnO4-1 to load manganese dioxide (MnO2). The idea was to fully exploit the structural advantages of ultra-low bulk density, large specific surface area, and high porosity of ANFs, and the possible chemical adsorption characteristics of MnO2 on the basis of ion exchange reaction. The adsorption capacity of 3D ANF/MnO2 composite aerogel was as large as 554.36 mg/g for Pb2+. The adsorption mechanism based on an exchange reaction between Pb2+ and protons on the surface of MnO2 was also investigated. The desorption results showed that the adsorption performance could remain up to 90% after five times of usage. In conclusion, this research provides promising insights into the preparation of high-performance lead adsorbent for water treatment.
Collapse
|
46
|
Direct production of 2, 5-Furandicarboxylicacid from raw biomass by manganese dioxide catalysis cooperated with ultrasonic-assisted diluted acid pretreatment. BIORESOURCE TECHNOLOGY 2021; 337:125421. [PMID: 34153866 DOI: 10.1016/j.biortech.2021.125421] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/20/2021] [Revised: 06/11/2021] [Accepted: 06/12/2021] [Indexed: 06/13/2023]
Abstract
In recent years, 2, 5-furandicarboxylic acid (FDCA) has attracted much attention as the precursor of bio-polyester materials. A coupled process of ultrasonic-assisted dilute acid pretreatment and MnO2 was designed in this study to directly produce FDCA from lignocellulosic biomass, which is different from the traditional preparation process. Moreover, the critical parameters in the process were analyzed and optimized by the response surface method. The yield of FDCA could reach 52.1% under the optimal conditions. The reaction mechanism indicated that heavy metal elements in lignocellulosic biomass could play the role of the Lewis acid catalyst to promote the formation of FDCA to a certain extent. With the increase of temperature, the heavy metals transfer in biomass from the solid phase to the liquid phase increased, but most of them remain in the former. Therefore, further purification and treatment measures are worthy of attention.
Collapse
|
47
|
Core bacterial community driven the conversion of fulvic acid components during composting with adding manganese dioxide. BIORESOURCE TECHNOLOGY 2021; 337:125495. [PMID: 34320772 DOI: 10.1016/j.biortech.2021.125495] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/09/2021] [Revised: 06/28/2021] [Accepted: 06/29/2021] [Indexed: 06/13/2023]
Abstract
Here, we revealed the effects of microbes on fulvic acid (FA) formation in composting by adding MnO2. The results showed that the MnO2 promoted the formation of highly humified components (79.2% increased for component 2, and 45.8% increased for component 3) in FA. Additionally, core bacteria involved in FA transformation were identified, the MnO2 increased the relative abundance of core bacteria. Notably, two different core bacteria types were identified: "transforming bacteria" and "processing bacteria". The "transforming bacteria" dominated (about 40% contribution) in the formation of FA components with a high humification degree. The structural equation model confirmed that "transforming bacteria" could convert partly FA components with low humification into highly humified components, and the "transforming bacteria" could be regulated by environmental factors. These findings provided a new insight to manage FA humification degree during composting and helped to improve the application value of FA.
Collapse
|
48
|
Catalytic ozonation for metoprolol and ibuprofen removal over different MnO 2 nanocrystals: Efficiency, transformation and mechanism. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 785:147328. [PMID: 33940402 DOI: 10.1016/j.scitotenv.2021.147328] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/25/2021] [Revised: 04/19/2021] [Accepted: 04/21/2021] [Indexed: 06/12/2023]
Abstract
Manganese dioxide has been widely recognized as catalyst in catalytic ozonation for organic pollutants removal from wastewater in recent decades. However, few studies focus on the structure-activity relationship of MnO2 and catalytic ozonation mechanism in water. In the present study, the oxidative reactivity of three different crystal phases of MnO2 corresponding to α-MnO2, β-MnO2 and γ-MnO2 towards metoprolol (MET) and ibuprofen (IBU) were evaluated. α-MnO2 was found to contain the most abundant oxygen vacancy and readily reducible surface adsorbed oxygen (O2-, O-, OH-), which facilitated an increase of ozone utilization and the highest catalytic performance with 99% degradation efficiency for IBU and MET. α-MnO2 was then selected to investigate the optimum key operating parameters with a result of catalyst dosage 0.1 g/L, ozone dosage 1 mg/min and an initial pH 7. The introduction of α-MnO2 promoted reactive oxygen species (O2-, O-, OH-) generation which played significant roles in IBU degradation. Probable degradation pathways of MET and IBU were proposed according to the organic intermediates identified and the reaction sites based on density function theory (DFT) calculations. The present study deepened our understanding on the MnO2 catalyzed ozonation and provided reference to enhance the process efficiency.
Collapse
|
49
|
Aggregation-induced emission luminogen@manganese dioxide core-shell nanomaterial-based paper analytical device for equipment-free and visual detection of organophosphorus pesticide. JOURNAL OF HAZARDOUS MATERIALS 2021; 413:125306. [PMID: 33588332 DOI: 10.1016/j.jhazmat.2021.125306] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/23/2020] [Revised: 01/18/2021] [Accepted: 01/31/2021] [Indexed: 06/12/2023]
Abstract
Organophosphorus pesticide (OP) residues have gathered considerable attention because of their significant threat to society development and healthy life. Developing a sensitive and practical OPs sensor is highly urgent, whereas remains a huge challenge. To this end, we fabricated a high-performance fluorescence paper analytical device (PAD) for apparatus-free and visual sensing of OPs based on aggregation-induced emission (AIE) luminogen's bright emission in aggregated state, unique response of MnO2 to thiol compounds, and difference of MnO2 and Mn2+ in quenching fluorescence. AIE nanoparticles PTDNPs-0.10 and MnO2 respectively acted as core and shell to prepare PTDNPs@MnO2, which possessed high stability and were dripped on cellulose paper's surface to fabricate AIE-PAD. The sensing mechanism is that OPs-treated acetylcholinesterase (AChE) prevents the formation of thiocholine, thereby minimizing the reduction of MnO2 into Mn2+ and changing the output signal. As a result, equipment-free and visual sensing of OPs was acquired with limit of detection of 1.60 ng/mL. This work justifies the feasibility of applying core-shell material to develop high-performance sensor and substituting complex/expensive solution-phase sensor with PAD, providing a new avenue to bring OPs analysis out of the lab and into the world.
Collapse
|
50
|
Thrombus-targeted nanoparticles for thrombin-triggered thrombolysis and local inflammatory microenvironment regulation. J Control Release 2021; 339:195-207. [PMID: 34214595 DOI: 10.1016/j.jconrel.2021.06.043] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2021] [Revised: 06/18/2021] [Accepted: 06/27/2021] [Indexed: 12/19/2022]
Abstract
Thrombus related diseases seriously threaten human's health and life. The drawbacks of thrombolytic drugs, such as poor targeting ability and unexpected bleeding complications limit their clinical application. Thus, targeted delivery and controlled release of drugs at local thrombus sites to achieve efficient thrombolysis is an urgent event to be resolved. Herein, we developed an intelligent system MnO2/uPA@pep-Fuco for precise thrombolysis and thrombus inflammatory microenvironment remodeling. MnO2/uPA@pep-Fuco exhibited an excellent thrombus targeting ability via the high affinity of fucoidan (Fuco) for P-selectin overexpressed by activated platelets. And then pep-Fuco modified onto the surface of mesopore could be removed to release urokinase (uPA) locally under the high level of thrombin microenvironment in thrombus site. Meanwhile, due to the catalase-like activity of MnO2 nanoplatform, MnO2/uPA@pep-Fuco could regulate the inflammatory thrombus microenvironment by eliminating hydrogen peroxide (H2O2), so as to achieve a collaborative thrombolysis therapy. In ferric chloride (FeCl3)-induced carotid thrombus models, MnO2/uPA@pep-Fuco specifically targeted to the obstructive artery (3.43 times that of the normal artery) and significantly decreased the percentage of thrombus closure (5.99 ± 5.07%), demonstrating the superior thrombolysis ability. In addition, the significantly reduced tail bleeding time suggested MnO2/uPA@pep-Fuco might possess a low risk of bleeding complications.
Collapse
|