Nitrogen-doped metal-free granular activated carbons as economical and easily separable catalysts for peroxymonosulfate and hydrogen peroxide activation to degrade bisphenol A

The fabrication of low-cost, highly efficient, environmentally friendly, and easily separable metal-free heterogeneous catalysts for environmental remediation remains a challenge. In this study, granular nitrogen-doped highly developed porous carbons with a particle size of 0.25-0.30 mm were prepared by preoxidation and subsequent NH3 modification of a commercially available coconut-based activated carbon, and used to activate peroxymonosulphate (KHSO5) or hydrogen peroxide (H2O2) to degrade bisphenol A (BPA). The nitrogen-doped carbon (ACON-950) prepared by NH3 modification at 950 °C, with the addition of only 0.15 g/L could remove 100% of 50 mg/L BPA in 150 min, and more than 90% of the removed BPA was due to degradation. The removal rates of total organic carbon of ACON-950/KHSO5 and ACON-950/H2O2 systems reached 60.4% and 66.2% respectively, indicating the excellent catalytic activity of ACON-950. The reaction rate constant was significantly positively correlated with the absolute content of pyridinic N (N-6) and graphitic N (N-Q) and negatively and weakly positively correlated with pyrrolic N (N-5) and defects. Quenching experiments combined with electron paramagnetic resonance demonstrated that singlet oxygen was the dominant reactive oxidative species for BPA degradation. ACON-950 was characterized before and after the degradation reaction using N2 adsorption-desorption analyzer, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The results confirmed the prominent contribution of both the N-6 and N-Q to the catalytic performance of nitrogen-doped carbons. The reusability of ACON-950 and its application in actual water bodies further demonstrated its remarkable potential for the remediation of organic pollutants in wastewater.

Construction of a colorimetric sensor array for the identification of phenolic compounds by the laccase-like activity of N-doped manganese oxide

Phenolic compounds, widely distributed in nature, encompass a diverse array of bioactive and antioxidant properties. The detection of different phenolic compound types holds paramount importance in elucidating their bioactivity and health effects, ensuring the quality and safety of food and drugs. Consequently, the development of simple, rapid, and cost-effective colorimetric sensing arrays capable of simultaneous phenolic compound detection has emerged as a prominent research pursuit. In this study, we present a one-step hydrothermal synthesis of N-doped MnO2 nanoflowers (NMF). NMF possess an extensive specific surface area and abundant oxygen vacancies, effectively mimicking the activity of natural laccase. Leveraging this laccase-like activity, NMF demonstrates the ability to catalyze various phenolic compounds, generating distinctive fingerprint signals. Notably, the developed colorimetric sensing array exhibits remarkable efficacy in effectively identifying and differentiating phenolic compounds within complex mixtures. Furthermore, the NMF colorimetric sensing array demonstrates successful identification of phenolic compounds in diverse environments, including food and urine samples. Overall, this study provides new insights into the design of transition metal materials for the simulation of laccase and colorimetric sensing arrays. It provides a promising avenue for the development of advanced detection platforms for phenolic compounds.

Synergistic effects of hierarchical porous structures and ultra-high pyridine nitrogen doping enhance the oxygen reduction reaction electrocatalytic performance of metal-free laminated lignin-based carbon

Construction of non-metallic biomass-carbon based catalysts for fuel cell air cathode applications has attracted great attention in recent years. In this work, a convenient and clean technique was developed to fabrication nitrogen-doped lignin-based hierarchical porous lamellar carbon (N-LHPC) via lignin as the carbon precursor, melamine/urea as the nitrogen source and ZnC2O4.2H2O as the chemical activator. The N-LHPC has a high specific surface area (491.5 m2 g-1) and macroporous/mesoporous/microporous structures. The nitrogen doping of N-LHPC can reach 16.37 wt%, with a high pyridinic nitrogen content of 41.39 at.%. N-LHPC exhibits a high half-wave potential (0.87 V) and a large limiting current density (5.75 mA cm-2) in 0.1 mol KOH media which is comparable to the commercial Pt/C catalysts. Furthermore, N-LHPC was assembled as air cathode catalyst for Zn-air batteries to evaluate its practical catalytic performance, and the power density was as high as 191 mW cm-2, which was superior to the 20 wt% Pt/C electrocatalyst. This research demonstrates that lignin is a promising carbon source for the fabrication of high catalytic activity and economical electrocatalysts for energy storage systems.

Boosting activity on copper functionalized biomass graphene by coupling nanocrystalline Nb2O5 as impressive rate capability for supercapacitor and outstanding catalytic activity for oxygen reduction

A novel and hierarchical porous but cross-linked copper-doped biomass graphene (Cu@HPBG) combined with Nb2O5 (denoted as Nb2O5/Cu@HPBG) is successfully fabricated on a large-scale using fig peels as biomass carbon and copper as the graphitization catalyst. During the synthesis process, basic copper carbonate serves dual functions of pore-forming agent, as well as homogeneous copper provider, and NH3 is employed as a defect-forming agent and N dopant. Owing to the porous hierarchical structure increased availability of contact interface and pseudo capacitance active sites provided by copper and Nb2O5, the assembled asymmetrical supercapacitor (ASC) employing Nb2O5/Cu@HPBG as positive electrode and HPBG as negative electrode can not only widen the stability window range of 0～1.9 V, but also deliver a maximum gravimetric energy density of 82.8 W h kg-1 at the power density of 950.0 W kg-1 and maintain a remarkable cycling stability of 97.1% after 15,000 cycles. Impressively, due to the synergistic enhancement of Cu@HPBG and Nb2O5, the resulting Nb2O5/Cu@HPBG hybrid displays more positive half wave potential (∼0.85 V) and a long-life stability than Pt/C electrode toward oxygen reduction reaction (ORR). Our research provides a feasible strategy to fabricate renewable biomass graphene electroactive composites for large-scale supercapacitor electrodes and efficient ORR catalysts toward energy applications.

Nitrogen-doped Fe2O3/NiTe2 as an excellent bifunctional electrocatalyst for overall water splitting

The development of inexpensive, high efficiency electrocatalysts is a major challenge for electrolytic water to hydrogen production. Herein, an efficient porous nanoblock catalyst N-doped Fe₂O₃/NiTe₂ heterojunction for overall water splitting is reported. Notably, the obtained 3D self-supported catalysts exhibit good hydrogen evolution. reaction (HER) activity and oxygen evolution reaction (OER) properties in alkaline solution (only 70 mV and 253 mV of overpotential are needed to provide 10 mA cm^-2 current density, respectively). This is mainly due to the N-doped electronic structure optimized, the strong electronic interaction between Fe₂O₃ and NiTe₂ that facilitates rapid electron transfer, the porous structure which allows the catalyst to have large surface area for effective gas release, and their synergistic effect. When used as a dual function catalyst with overall water splitting, it achieved a current density of 10 mA cm^-2 under 1.54 V with good durability (at least 42 h). The present work provides a new methodology for the study of high-performance, low-cost, and corrosion-resistant bifunctional electrocatalysts.

One-pot synthesis of nitrogen-doped carbonized polymer dots with tunable emission for multicolor light-emitting diodes

Carbonized polymer dots (CPDs) have highly potential application value in the field of optoelectronic devices due to their preferable stability, excellent optical properties and low cost. Here, the nitrogen-doped carbonized polymer dots (HNCDs) with self-quenching-resistant fluorescence were prepared via a simple solvothermal method with citric acid, urea and 2-hydroxyethyl methacrylate (HEMA) as raw materials. The structure and optical properties of the HNCDs have been explored in detail by various contrast experiments. The results show that HEMA form the poly(HEMA) to modify on the surface of carbonized core, which can overcome the quenching effect of carbonized core. The nitrogen doping is crucial for the red shift emission of solid-state HNCDs. Furthermore, the HNCDs exhibit concentration-dependent emission and excellent compatibility with silicone sol, which lead to their emission red shifted from blue to red with increasing concentration. The HNCDs were further applied to construct the light-emitting diodes (LEDs), and the multicolor LEDs ranging from blue to red can be prepared by simply varying the type of chips and adjusting the concentration of HNCDs in encapsulating material.

Nickel cobaltite nanowire arrays grown on nitrogen-doped carbon nanotube fiber fabric for high-performance flexible supercapacitors

Flexible supercapacitors have received considerable attention for their potential application in flexible electronics, but usually suffer from relatively low energy density. Developing flexible electrodes with high capacitance and constructing asymmetric supercapacitors with large potential window has been considered as the most effective approach to achieve high energy density. Here, a flexible electrode with nickel cobaltite (NiCo₂O₄) nanowire arrays on nitrogen (N)-doped carbon nanotube fiber fabric (denoted as CNTFF and NCNTFF, respectively) was designed and fabricated through a facile hydrothermal growth and heat treatment process. The obtained NCNTFF-NiCo₂O₄ delivered a high capacitance of 2430.5 mF cm^-2 at 2 mA cm^-2, a good rate capability of 62.1 % capacitance retention even at 100 mA cm^-2 and a stable cycling performance of 85.2 % capacitance retention after 10,000 cycles. Moreover, the asymmetric supercapacitor constructed with NCNTFF-NiCo₂O₄ as positive electrode and activated CNTFF as negative electrode exhibited a combination of high capacitance (883.6 mF cm^-2 at 2 mA cm^-2), high energy density (241 μW h cm^-2) and high power density (80175.1 μW cm^-2). This device also had a long cycle life after 10,000 cycles and good mechanical flexibility under bending conditions. Our work provides a new perspective on constructing high-performance flexible supercapacitors for flexible electronics.

Controlled fabrication of nitrogen-doped porous carbon foam with refined hierarchical architectures for desalination via capacitive deionization

Porous carbon materials have been regarded as a promising alternative to activated carbon for desalination via capacitive deionization (CDI) due to refined architectures and functionalities. However, it is still challenging to obtain a controlled hierarchical pore structure and considerable nitrogen-doped content by convenient method. Herein, nitrogen-doped hierarchical porous carbon foams (NHCFs) with different microstructural features, nitrogen contents and nitrogen species were successfully fabricated via a stepwise pyrolysis carbonization strategy using easily available melamine foam. Due to the synergistic effect of hierarchical porous structure and doped nitrogen, the optimized NHCF sample carbonized at 800℃ (NHCF-800) exhibited a maximum desalination capacity of 30.1 mg g^-1 at the optimal operating parameters (500 mg/L NaCl solution, 1.2 V) and an excellent regeneration performance after 50 continuous adsorption-desorption cycles. Furthermore, density functional theory (DFT) was also conducted to elaborate the disparity of sodium adsorption energy among the nitrogen species for in-depth understanding, and it mainly benefits from the ascendency of the pyrrolic-N and pyridinic-N over the graphitic-N dopant. This work paves the way of rational regulation of nitrogen-doped process and hierarchical porous structure carbon as CDI electrode materials for desalination.

Promotion of formaldehyde degradation by electro-Fenton: Controlling the distribution of ·OH and formaldehyde near cathode to increase the reaction probability

The mismatch of pollutant concentration and ·OH concentration is the key reason for the inefficient degradation of formaldehyde in the electro-Fenton system. Therefore, formaldehyde and ·OH are adsorbed near the cathode, and the high concentration reaction region is constructed to increase the reaction probability, which is called control of the reaction region. Through nitrogen doping modification of the activated carbon cathode, the adsorption capacity of the modified cathode for formaldehyde and active species, and the selectivity of the two-electron oxygen reduction reaction were deeply analyzed. The results show that the suitable nitrogen doping form of the modified cathode significantly promotes the adsorption capacity of formaldehyde and H₂O₂, which is beneficial to realizing the promotion of formaldehyde degradation by nitrogen doped cathodes in the electro-Fenton system through control of the reaction region. Graphite nitrogen and pyrrolic nitrogen improve formaldehyde adsorption by enhancing the van der Waals force (8.897 mg g^-1), and pyridinic nitrogen improve H₂O₂ adsorption (1.841 mg g^-1) by enhancing the effect of hydrogen bonding interaction. Nitrogen doping enhances Fe²⁺ regeneration, which contributes to the generation of ·OH at the cathode, and promotes formaldehyde degradation. The control of the reaction region through modification of the electro-Fenton cathode achieved formaldehyde degradation of 35.1 mg L^-1 (48.51% higher than that of the unmodified cathode), which provides a promising process for formaldehyde treatment.

Enhanced removal of Cr(VI) from aqueous solutions by polymer-mediated nitrogen-rich reduced graphene oxide

The efficient removal of heavy metal by rationally designed carbon-based adsorbents is a key challenge in the field of water purification. Herein, we report a nitrogen-enriched lignosulfonate exfoliated graphene oxide (N-LEGO) for hexavalent chromium (Cr(VI)) removal from aqueous solution. The nitrogen content of N-LEGO reached 13.28%, and the ratio of N-bonding configurations (pyri-N:amine-N:pyrro-N:grap-N) was 2.3:1.6:1:2.3. For Cr(VI) with initial concentration of 70 mg L^-1 under pH= 2, the residuary concentration after treated by N-LEGO was close to 0.004 mg L^-1, which meets the industrial wastewater discharge standard. The Cr(VI) adsorption behavior on N-LEGO can be fitted with the pseudo-second-order kinetics and Freundlich isotherm model well. The adsorption mechanism of Cr(VI) on N-LEGO includes anions electrostatic attraction, reduction and surface chelation. Density functional theory (DFT) simulations showed that N atoms doping was feasible and thermodynamically stable, meanwhile the N-doped system was easier to adsorb Cr₂O₇^2- than HCrO₄^-. The findings of this work can provide a new idea for the development of N-doped carbon-based adsorbents for the removal of highly toxic Cr(VI) from aqueous solutions.

Nitrogen-rich accordion-like lignin porous carbon via confined self-assembly template and in-situ mild activation strategy for high-performance supercapacitors

Nitrogen-doped porous carbons have emerged as promising electrode materials for supercapacitors. However, the precise control of carbon geometry and the effective doping method remain challenging. Herein, a confined self-assembly template and in-situ mild activation strategy is proposed to prepare cubic lignin composite precursor, followed by co-pyrolysis with melamine at a high temperature for nitrogen-doped hierarchical porous carbons (N-HPLCs). The zinc oxalate template has the coupling effect of confinement and mild activation during carbonization, which not only prevents the restacking of the carbon matrix but also generates zinc cyanamide intermediate to avoid excessive loss of nitrogen species. The optimized N-HPLCs exhibit an accordion-like framework with interconnected porous sheets, ultrahigh edge-nitrogen doping level (up to 12.20 at.%), and a total nitrogen doping level of 14.09 at.%. Consequently, it shows a high gravimetric capacitance of 354 F/g at 0.2 A/g, an extraordinary surface-area-normalized capacitance of 82.1 ± 0.2 μF/cm², and good rate capability in supercapacitor applications. Moreover, the fabricated coin-type symmetric supercapacitor displays a high energy density of 12.9 Wh/kg at 161.9 W/kg and superior cycling stability with a 99.5% capacitance retention after 16,000 cycles at 2.0 A/g. This work offers a novel method for preparing nitrogen-enriched lignin-derived carbon for high-performance supercapacitors.

Rational nanostructured FeSe2 wrapped in nitrogen-doped carbon shell for high-rate capability and long cycling sodium-ion storage

Transition metal selenides (TMSs) have drawn substantial attention as promising anode materials for sodium-ion batteries (SIBs) on account oftheir rapid reaction kinetics and high reversible capacity. However, the undesirable capacity decay and inferior rate performance still hamper their large-scale application. Herein, an anode material comprising combination of olivary nanostructure FeSe₂ core and nitrogen-doped carbon shell (designated as FeSe₂@NC) is well designed by in-situ polymerization and selenization method. The well-designed nitrogen-doped carbon shell can not only alleviate the volume variation during the electrode cycling but also provide an optimized ion/electron transport pathway. The resulting FeSe₂@NC electrodes exhibit a superior rate capability of 228.4 mA h g^-1 at 10 A g^-1 and a long cycling performance of 246.5 mA h g^-1 at 5 A g^-1 after 1000 cycles, which can be assigned to the enhanced structural integrity and improved electrical conductivity. The strategy would present a promising thought for structure design of TMSs as anode materials, which could enhance high-rate and long-lasting cycle performances for SIBs.

Morphological modulation of iron carbide embedded nitrogen-doped hierarchically porous carbon by manganese doping as highly efficient bifunctional electrocatalysts for overall water splitting

In the development of water splitting, the sluggish electrocatalytic kinetics of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) have restricted their energy conversion efficiencies. Along with the continuous rise in the prices of noble metals and transition metals (such as cobalt and nickel), constructing high-efficiency HER/OER catalysts based on low cost transition metals, such as iron and manganese, is becoming more meaningful in developing industrialized water splitting devices. In this paper, in the absence of a template or active agent, three-dimensional, hierarchically porous Fe_xMn_y nanoparticles (NPs) were embedded and nitrogen-doped carbon materials (denoted as Fe_xMn_y@NC; x:y, representing the molar ratio of Fe:Mn) were successfully prepared via pyrolysis of corresponding precursors containing different metallic salt components. Various morphological, structural, and chemical characterization analysis demonstrate that at an Fe:Mn molar ratio of 3:1, the optimal Fe₃Mn₁@NC material shows high graphitization degree, rich mesoporous structures, a large surface area, and abundant carbon defects/edges, which promote the uniform dispersion of pyridinic-N (pyridinic-N-metal), graphitic-N, carbon oxygen bonds (CO), manganese oxide (MnO) nanocrystals, and Fe₃C NPs-embedded, N-doped carbon sheet (Fe₃C@NC) active sites. In alkaline conditions, the HER onset potentials (E_onset) and potentials recorded at 10 mA cm^-2 (E₁₀) of the optimal Fe₃Mn₁@NC are just 84.8 and 156 mV more negative than those of 20 wt% platinum carbon (Pt/C). Meanwhile, the OER E_onset and E₁₀ values of the optimal Fe₃Mn₁@NC are just 8 and 18.7 mV more positive than those of RuO₂. Furthermore, optimized Fe₃Mn₁@NC catalysts were assembled into a water splitting cell, where the catalytic current density achieves 10 mA cm^-2 at a low voltage of 1.6287 V (with superior catalytic stability), which is just 24.9 mV higher than that of the (-) 20 wt% Pt/C||RuO₂ (+) benchmark (1.6038 V) under the same conditions. This work describes the regulating efficiency of Mn toward growing mesopores and opens new possibilities for the development of novel carbonaceous catalysts with excellent hydroxide catalytic efficiencies based on low cost Mn/Fe elements.

Hierarchical porous structure formation mechanism in food waste component derived N-doped biochar: Application in VOCs removal

Nitrogen-doped (N-doped) hierarchical porous carbon was widely utilized as an efficient volatile organic compounds (VOCs) adsorbent. In this work, a series of N-doped hierarchical porous carbons were successfully prepared from the direct pyrolysis process of three food waste components. The porous biochar that derived from bone showed a high specific surface area (1405.06 m²/g) and sizable total pore volume (0.97 cm³/g). The developed hierarchical porous structure was fabricated by the combined effect of self-activation (Carbon dioxide (CO₂) and water vapor (H₂O)) and self-template. The emission characteristics of activation gas analyzed by Thermogravimetric-Fourier transform infrared spectrometer (TG-FTIR) and the transformation of ash composition in the biochar help to illustrate the pore-forming mechanism. Calcium oxide (CaO) and hydroxylapatite were confirmed as the major templates for mesopores, while the decomposition processes of calcium carbonate (CaCO₃) and hydroxylapatite provided a large amount of activation gas (CO₂ and H₂O) to form micropores. The materials also obtained abundant N-containing surface functional groups (up to 7.84 atomic%) from pyrolysis of protein and chitin. Finally, the porous biochar showed excellent performance for VOCs adsorption with a promising uptake of 288 mg/g for toluene and a high adsorption rate of 0.189 min^-1. Aplenty of mesopores distributed in the materials effectively improved the mass transfer behaviors, the adsorption rate got a noticeable improvement (from 0.118 min^-1 to 0.189 min^-1) benefited from mesopores. Reusable potentials of the hierarchical porous carbons were also satisfying. After four thermal regeneration cycles, the materials still occupied 84.8%-87.4% of the original adsorption capacities.

Adsorption and diffusion of magnesium on nitrogen-doped Mo2C monolayer

The Mg adsorption and diffusion behaviors on nitrogen-doped (N-doped) Mo₂C monolayer have been investigated by the first principles based on density functional theory (DFT). To investigate the effect of nitrogen concentration on adsorption energies, Mo₂C_1-xN_x (x=0.0625, 0.125, 0.1875, and 0.25) with four different nitrogen doping concentrations have been considered in the present work. The results show that N-doped Mo₂C is benefit for Mg adsorption. In particular, when the doping concentration reaches to 14.29%, the adsorption energies of Mg on Mo₂C_0.875N_0.125 are in the region between -1.639 and -1.517 eV, e.g., the adsorption energies of Mg on T_C1 and H₂ sites are -1.639 eV and -1.625 eV, which are decreased by 16.49% and 18.43% as compared with the pristine Mo₂C. The calculations on diffusion behaviors show that the Mg diffusing between two adjacent favored sites via a high-symmetry site along H₃-B-H₄ and H₁-B-H₁ paths possesses the barriers of 0.021 eV and 0.028 eV. Additionally, the partial density of states (PDOS) reveals the interaction between Mg and Mo₂C_0.875N_0.125, and indicates that nitrogen doping causes the PDOS peaks transfer to a lower energy level, which is benefit for the bonding between Mg and Mo₂C_0.875N_0.125. These results suggest that the adsorption and diffusion behaviors of Mg have been enhanced by nitrogen doping.

Hollow nitrogen-doped carbon nanospheres as cathode catalysts to enhance oxygen reduction reaction in microbial fuel cells treating wastewater

Hollow nanospheres play a pivotal role in the electro-catalytic oxygen reduction reaction (ORR), which is a crucial step in microbial fuel cell (MFC) device. Herein, the hollow nitrogen-doped carbon nanospheres (HNCNS) were synthesized with the sacrifice of silica coated carbon nanospheres (CNS@SiO₂) as template. HNCNS remarkably enhanced the ORR activity compared to the solid carbon and solid silica spheres. By tuning calcination temperature (800-1100 °C), the surface chemistry properties of HNCNS were effectively regulated. The optimal HNCNS-1000 catalyst which was calcined at 1000 °C exhibited the highest ORR activity in neutral media with the onset potential of 0.255 V and half-wave potential of -0.006 V (vs. Ag/AgCl). Single chamber MFC (SCMFC) assembled with HNCNS-1000 cathode unveiled comparable activity to a conventional Pt/C reference. It showed the highest maximum power density of 1307 ± 26 mW/m², excellent output stability of 5.8% decline within 680 h, chemical oxygen demand (COD) removal of 94.0 ± 0.3% and coulombic efficiency (CE) of 7.9 ± 0.9%. These excellent results were attributed to a cooperative effect of the optimized surface properties (e.g., structural defects, relative content of pyrrolic nitrogen and specific surface area) and the formation of hollow nanosphere structure. Furthermore, the positive linear relationship of the structural defects and pyrrolic nitrogen species with the maximum power generation in SCMFC were clearly elucidated. This study demonstrated that the cost effective HNCNS-1000 was a promising alternative to commercial Pt/C catalyst for practical application in MFCs treating wastewater. Our result revealed the effectiveness of MFC fabricated with HNCNS-1000 cathode catalyst in terms of power generation and wastewater treatment.

Fragment-interconnected nitrogen-doped porous carbon nanosheets loaded with platinum group metals for highly boosted hydrogen evolution reaction in alkaline solution

The rational design and preparation of advanced electrocatalysts for the hydrogen evolution reaction (HER) under alkaline conditions is the key to achieving sustainable hydrogen production. Herein, a new type of nitrogen-doped porous carbon nanosheets (NPCN) loaded with platinum group metals (Pd, Pt or Ru) were prepared. The introduction of melamine not only realized the doping of N-species, but also optimized the morphology and surface functional groups of the prepared catalysts. The prepared Pd-NPCN, Pt-NPCN and Ru-NPCN with a metal loading of about 10 wt% showed outstanding HER activity (21, 9 and 11 mv at 10 mA cm^-2 current density), small Tafel slopes (49, 30 and 30 mV dec^-1) and good stability in 1.0 M KOH. In addition, the mechanism of the introduction of melamine to improve the catalytic performance of HER was also discussed. Therefore, this work provides promising alternatives to traditional Pt-based catalysts, and is instructive for the design of high-efficiency alkaline HER catalysts.

A mild method to prepare nitrogen-rich interlaced porous carbon nanosheets for high-performance supercapacitors

In this work, a non-toxic and mild strategy was presented to efficiently fabricate porous and nitrogen-doped carbon nanosheets. Silkworm cocoon (SCs) acted as carbon source and original nitrogen source. Sodium carbonate (Na₂CO₃) could facilitate the SCs to expose silk protein and played a catalytic role in the subsequent activation of calcium chloride (CaCl₂). Calcium chloride served as pore-making agent. The as-obtained carbon materials with protuberant porous nanosheets exhibit high specific surface area of 731 m² g^-1, rich native nitrogen-doped of 7.91 atomic %, wide pore size distribution from 0.5 to 65 nm, and thus possessing high areal specific capacitances of 34 μF cm^-2 as well as excellent retention rate of 97% after 20 000 cycles at a current density of 20 A g^-1 in 6 M KOH electrolyte. The assembled carbon nanosheet-based supercapacitor displays a maximum energy density of 21.06 Wh kg^-1 at the power density of 225 W kg^-1 in 1 M Na₂SO₄ electrolyte. Experimental results show that a mild and non-toxic treatment of biomass can be an effective and extensible method for preparing optimal porous carbon for electrochemical energy storage.

Highly conductive Co3Se4 embedded in N-doped 3D interconnected carbonaceous network for enhanced lithium and sodium storage

Traditional cobalt selenides as active materials in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) would suffer from drastic volume expansions and large stacking effects, leading to a low cycling stability. In this work, we utilized a facile template method for preparing Co₃Se₄@N-CN (CSNC) that encapsulated Co₃Se₄ nanoparticles into 3D interconnected nitrogen-doped carbon network (N-CN). Satisfactorily, it possesses excellent cycling stability with enhanced lithium and sodium energy storage capacity. As an anode material in LIBs, CSNC exhibited a prominent reversible discharge performance of 1313.5 mAh g^-1 after 100 cycles at 0.1 A g^-1 and 835.6 mAh g^-1 after 500 cycles at 1.0 A g^-1. Interestingly, according to the analysis from cyclic voltammetry, the in-situ generated Se might provide extra capacity that leaded to a rising trend of capacity. When utilized as an anode in SIBs, CSNC delivered an outstanding capacity of 448.7 mAh g^-1 after 100 cycles at 0.1 A g^-1 and could retain 328.9 mAh g^-1 (77.2% of that of 0.1 A g^-1) even at a high current density of 5.0 A g^-1. The results demonstrate that CSNC is a superior anode material in LIBs and SIBs with great promise. More importantly, this strategy opens up an effective avenue for the design of transition metal selenide/carbonaceous composites for advanced battery storage systems.

Coaxial spinning fabricated high nitrogen-doped porous carbon walnut anchored on carbon fibers as anodic material with boosted lithium storage performance

Commercial graphite with low theoretical capacity cannot meet the ever-increasing requirement demands of lithium-ion batteries (LIBs) caused by the rapid development of electric devices. Rationally designed carbon-based nanomaterials can provide a wide range of possibilities to meet the growing requirements of energy storage. Hence, the porous walnut anchored on carbon fibers with reasonable pore structure, N-self doping (10.2 at%) and novel structure and morphology is designed via interaction of inner layer polyethylene oxide and outer layer polyacrylonitrile and polyvinylpyrrolidone during pyrolysis of the obtained precursor, which is fabricated by coaxial electrospinning. As an electrode material, the as-made sample shows a high discharge capacity of 965.3 mA h g^-1 at 0.2 A g^-1 in the first cycle, retains a capacity of 819.7 mA h g^-1 after 500 cycles, and displays excellent cycling stability (475.2 mA h g^-1 at 1 A g^-1 after 1000 cycles). Moreover, the capacity of the electrode material still keeps 260.5 mA h g^-1 at 5 A g^-1 after 1000 cycles. Therefore, the obtained sample has a bright application prospect as a high performance anode material for LIBs. Besides, this design idea paves the way for situ N-enriched carbon material with novel structure and morphology by coaxial electrospinning.

A Cu2+-assisted fluorescence switch biosensor for detecting of coenzyme A employing nitrogen-doped carbon dots

Herein, a simple and sensitive Cu²⁺-assisted fluorescence switch biosensor for the detection of coenzyme A (CoA) was proposed by employing nitrogen-doped carbon dots (N-CDs). N-CDs were successfully synthesized by sodium alginate and melatonin via pyrolysis. The as-prepared N-CDs were spherical with an average diameter of 2.8 nm and exhibited blue emission (λ_em = 480 nm, λ_ex = 360 nm) with a high fluorescence quantum yield of 50.2%. The intense blue emission of the N-CDs could be effectively quenched by copper ions through the formation of the N-CDs/Cu²⁺ complex. With the introduction of CoA, a more stable CoA/Cu²⁺ complex formed, leading to the fluorescence recovery of N-CDs. Based on this strategy, CoA could be sensitively and selectively detected with a good linear relationship in the range of 0.02-5.00 μM and with a detection limit of 12 nM. In addition, this sensor was applied for CoA detection in human serum samples with satisfactory recovery. The results showed great potential towards advancing applications in CoA-dependent bioresearch.

Development of surface imprinted heterogeneous nitrogen-doped magnetic carbon nanotubes as promising materials for protein separation and purification

To promote the development of molecular imprinting technique in the separation and analysis of protein, novel bovine serum albumin (BSA) surface imprinted nitrogen-doped magnetic carbon nanotubes (N-MCNTs@MIPs) are developed by this paper. The imprinted materials are prepared by depositing polydopamine (PDA) on the surface of nitrogen-doped magnetic carbon nanotubes (N-MCNTs). N-MCNTs prepared by high temperature pyrolysis and chemical vapor deposition exhibit high specific surface area, positive hydrophilicity, abundant nitrogen functional groups and excellent magnetic properties. These characteristics are conducive to the increase of effective binding sites, the smooth development of the protein imprinting process in the aqueous phase, the improvement of the binding capacity and the simplification of the separation process. The amount of BSA adsorbing on the N-MCNTs@MIPs can reach 150.86 mg/g within 90 min. The imprinting factor (IF) is 1.43. The results of competitive adsorption and separation of fetal bovine serum showed that N-MCNTs@MIPs can specifically recognize BSA. The excellent reusability and separation ability for real sample prove that N-MCNTs@MIPs have the potential to be applied to the separation and purification of proteins in complex biological samples.

Enhanced Potassium-Ion Storage of the 3D Carbon Superstructure by Manipulating the Nitrogen-Doped Species and Morphology

Potassium-ion batteries (PIBs) are attractive for grid-scale energy storage due to the abundant potassium resource and high energy density. The key to achieving high-performance and large-scale energy storage technology lies in seeking eco-efficient synthetic processes to the design of suitable anode materials. Herein, a spherical sponge-like carbon superstructure (NCS) assembled by 2D nanosheets is rationally and efficiently designed for K⁺ storage. The optimized NCS electrode exhibits an outstanding rate capability, high reversible specific capacity (250 mAh g^-1 at 200 mA g^-1 after 300 cycles), and promising cycling performance (205 mAh g^-1 at 1000 mA g^-1 after 2000 cycles). The superior performance can be attributed to the unique robust spherical structure and 3D electrical transfer network together with nitrogen-rich nanosheets. Moreover, the regulation of the nitrogen doping types and morphology of NCS-5 is also discussed in detail based on the experiments results and density functional theory calculations. This strategy for manipulating the structure and properties of 3D materials is expected to meet the grand challenges for advanced carbon materials as high-performance PIB anodes in practical applications.

Carbon/Sulfur Aerogel with Adequate Mesoporous Channels as Robust Polysulfide Confinement Matrix for Highly Stable Lithium-Sulfur Battery

The ability to restrict the shuttle of lithium polysulfide (LiPS_n) and improve the utilization efficiency of sulfur represents an important endeavor toward practical application of lithium-sulfur (Li-S) batteries. Herein, we report the crafting of a robust 3D graphene-wrapped, nitrogen-doped, highly mesoporous carbon/sulfur (G-NHMC/S) hierarchical aerogel as an effective polysulfide confinement matrix for a highly stable Li-S battery. Rich polar sites of NHMC firmly anchor LiPS_n on the matrix surface. Porous NHMC provides ample space for accommodating sulfur and cushioning its volume expansion. Moreover, graphene wrapped on NHMC/S not only physically hinders the LiPS_n shuttle but also interconnects the isolated NHMC/S, thus increasing electron transfer rate. Taken together, triple confinement of G-NHMC/S aerogel synergistically retains the soluble LiPS_n and displays a specific capacity of 1322 mAh g^-1 and 1000-cycle life. As such, rationally designed 3D carbon/sulfur aerogel affords a unique platform to impart high energy density and stable electrodes for energy storage devices.

Design and fabrication of in-situ N-doped paper-like carbon nanofiber film for thiophene removal from a liquid model fuel

The novel nitrogen-doped porous carbon nanofibers film (PAN-CNFs) had been successfully prepared by electrospinning with polyacrylonitrile as carbon precursor after calcination under N₂ atmosphere. The structure and physical properties of PAN-CNFs were determined by a series of characterizations. The results showed that the PAN-CNFs-800 have the higher N content (10.02 wt.%), larger surface area (354.327 m²/g) and optional V_mic/V_Total (28.14 %). The adsorption desulphurization was examined by thiophene (TH) simulated oil. The experimental results demonstrated that the PAN-CNFs were the desirable adsorption materials as alternative candidate in present adsorption technique. Furthermore, the pseudo order kinetics and adsorption isotherm of the PAN-CNFs-800 was intensive studied, which exhibited good adsorptive capacity for thiophene (TH) reached 113.33 mg/L according to the Langmuir isotherm model and maintained promising recycling reusing performance. The adsorption mechanism was proposed by these models, which should be attributed to the cooperating effect of the proper pore structure and the π-π complexation interactions.

Preparation of nitrogen-doped porous carbon material by a hydrothermal-activation two-step method and its high-efficiency adsorption of Cr(VI)

Nitrogen-doped carbon spheres (CSs-N) were synthesized by a hydrothermal method with glucose as the carbon source and urea as the nitrogen source. The synthesized nitrogen-doped carbon spheres were activated by KOH to prepare high performance nitrogen-doped porous carbon material (PCM-N) for adsorption of Cr(VI). SEM, TEM, BET, Raman spectroscopy, XRD, XPS, Zeta potential and elemental analysis techniques were used to characterize the materials, and the properties of the materials were tested by a batch adsorption method. The results show that the specific surface area of PCM-N is 1600.67 m²/g, and the maximum adsorption capacity of Cr(VI) is 402.9 mg/g, and the performance was better than that of a similar materials (Longan seed and Fox nutshell and so on). Furthermore, the adsorption capacity will increase with increasing temperature. In this study, the kinetics and isotherm model of adsorption parameters are fitted, and it is found that the adsorption process is in accordance with the Pseudo-second-order kinetic model and Freundlich model, thermodynamic parameters show that the adsorption of Cr(VI) onto the PCM-N was spontaneous endothermic process. The regeneration adsorption experiment showed that PCM-N has good reusability and high application value.

Enhancing oxygen reduction reaction by using metal-free nitrogen-doped carbon black as cathode catalysts in microbial fuel cells treating wastewater

Microbial fuel cells (MFCs) is promising to combat environmental pollution by converting organic waste to electricity. One critical problem for practical application of MFCs treating wastewater is sluggish oxygen reduction reaction (ORR) on cathode. This study focused on developing novel metal-free cost-effective cathodic catalysts to enhance power generation of MFCs. Specifically, carbon powder (Vulcan XC-72R) was modified with acid treatment and pyrazinamide (as nitrogen precursor), and subsequently pyrolyzed at different temperatures. For CN-X (X = 700-1000 °C) materials, chemical compositions (the doping contents of nitrogen species, oxygen-containing groups, and sulfur-containing groups) were altered with pyrolysis temperature. Linear sweep voltammetry showed that CN-800 exhibited the highest ORR activity, with an onset potential of 0.215 V and a half-wave potential of -0.096 V (vs. Ag/AgCl). Electrochemical measurements clearly presented an enhancement of ORR activity by treating carbon powder with sulfuric acid and nitrogen doping, which was well correlated with voltage output in single chamber MFCs (SCMFCs). On the other hand, for the nitrogen-doped cathode catalysts, the best performance in SCMFCs was directly related with the amount of pyridinic nitrogen species and total nitrogen amount. The MFC operated with CN-800 exhibited a maximum power density of 371 ± 3 mW/m² with the chemical oxygen demand (COD) removal of 77.2 ± 1.5% and coulombic efficiency (CE) of 8.6 ± 0.3%. Furthermore, the MFC with CN-800 exhibited an excellent stability over longer than 580 h of operation with 1.5% voltage reduction. CN-800 possessed comparable COD removal efficiency to conventional costly Pt/C, and exhibited distinct cost-effectiveness for MFC practical applications in wastewater treatment.

Highly dispersive NiCo2S4 nanoparticles anchored on nitrogen-doped carbon nanofibers for efficient hydrogen evolution reaction

To solve the energy crisis problem, many efforts have been devoted to develop clean and sustainable alternatives to fossil fuels. Among varieties of pathways to obtain clean energy, electrochemical water splitting is a promising approach. Herein, we had successfully synthesized the NiCo₂S₄@porous nitrogen-doped carbon nanofibers (NiCo₂S₄@NCNF) nanocomposite via three successive steps consisted of in-situ oxidative polymerization, calcination, and solvothermal sulfuration reaction processes. The effect of controlled molar ratios to electrocatalytic performance was studied in detail. The optimized NiCo₂S₄@NCNF nanocomposite exhibits superior electrocatalytic activity for hydrogen evolution reaction with a small overpotential of 117 mV to drive a current density of 10 mA cm^-2. More importantly, it exhibits similar electrocatalytic activity to the initial state even after successive cyclic voltammetry scan for 3000 cycles, indicating its excellent long-term stability. The superior electrochemical performance is attributed to the developed three-dimensional (3D) network nanostructure derived from bacterial cellulose nanofibers, the highly conductive porous nitrogen-doped carbon nanofibers, and the synergistic effect between metal Ni and Co of NiCo₂S₄. This study permits a new pathway to design efficient electrocatalysts based on eco-friendly materials for the production of clean hydrogen energy.

Nitrogen/sulfur co-doped ordered carbon nanoarrays for superior sulfur hosts in lithium-sulfur batteries

A universal and low-cost biomass waste, soybean residue, that was derived from a soybean product processing plant, was used to fabricate nitrogen/sulfur co-doped, ordered carbon nanoarrays (NS-OCNA/S). The effects of nitrogen and sulfur co-doping and the addition of formaldehyde on the structure and properties of these novel materials were investigated using X-ray diffraction (XRD), Raman spectrometry, scanning electron microscopy (SEM) techniques and galvanostatic charge/discharge tests. With high levels of sulfur doping, the nitrogen/sulfur co-doped ordered carbon nanoarrays (NS-OCNA/S) were found to possess hierarchical pores and a high pore volume. The NS-OCNA/S exhibited good electrical conductivity, excellent discharge capacity and cycling performance. When the NS-OCNA/S was used in Li-S batteries it was found that the charge capacity of the cell decayed from 914 to 739 mAh g^-1, with a capacity retention 81% over 600 cycles at 2 C. This successful research effort has identified new, high-performance materials derived from bio-resources for use in Li-S batteries.

Mechanism of biomass activation and ammonia modification for nitrogen-doped porous carbon materials

The effect of chemical activation and NH₃ modification on activated carbons (ACs) was explored via two contrasting bamboo pyrolysis strategies involving either two steps (activation followed by nitrogen doping in NH₃ atmosphere) or one step (activation in NH₃ atmosphere) with several chemical activating reagents (KOH, K₂CO₃, and KOH + K₂CO₃). The ACs produced by the two-step method showed relatively smaller specific surface areas (∼90% micropores) and lower nitrogen contents. From the one-step method, the ACs had larger pore diameters with about 90% small mesopores (2-3.5 nm). Due to a promotion effect with the KOH + K₂CO₃ combination, the AC attained the greatest surface area (2417 m² g^-1) and highest nitrogen content (3.89 wt%), endowing the highest capacitance (175 F g^-1). The balance between surface area and nitrogen content recommends KOH + K₂CO₃ activation via the one-step method as the best choice for achieving both greener production process and better pore structure.

Facile one-pot synthesis of highly fluorescent nitrogen-doped carbon dots by mild hydrothermal method and their applications in detection of Cr(VI) ions

Nitrogen-doped carbon dots (N-CDs) with well-distribution size and strong blue emission were successfully synthesized via a simple mild hydrothermal strategy using citric acid and ethylenediamine as co-precursors. The highly fluorescent N-CDs exhibit high fluorescence quantum yield (QY, 58.6%), excitation-independent emission behavior, and good photostability. The experimental results showed that the N-CDs can be served as a fluorescent sensing platform for detection of Cr(VI) ions due to the effective fluorescence quenching effect of Cr(VI) ions. The quenching mechanism probably arises from the inner filter effect (IFE) and the electron transfer due to the strong interactions between functional groups (COOH, OH and NH₂ groups) of the N-CDs and Cr(VI) ions. It is also found that the N-CDs showed high sensitivity toward Cr(VI) ions with a detection limit of 0.26 μM. Moreover, the obtained N-CD can be employed as chemsensor to detect Cr (VI) in real river water samples, which have potential applications in the environmental water.

Facile Synthesis of Nitrogen-Doped Microporous Carbon Spheres for High Performance Symmetric Supercapacitors

Nitrogen-doped microporous carbon spheres (NMCSs) are successfully prepared via carbonization and KOH activation of phenol-formaldehyde resin polymer spheres synthesized by a facile and time-saving one-step hydrothermal strategy using triblock copolymer Pluronic F108 as a soft template under the Stöber-like method condition. The influence of the ethanol/water volume ratios and carbonation temperatures on the morphologies, pore structures and electrochemical performances of the prepared NMCSs are investigated systematically. The optimal NMCSs have a large specific surface area of 1517 m2 g- 1 with a pore volume of 0.8 cm3 g- 1. The X-ray photo-electron spectroscopy analysis reveals a suitable nitrogen-doped content of 2.6 at.%. The as-prepared NMCSs used as supercapacitor electrode materials exhibit an outstanding specific capacitance of 416 F g- 1 at a current density of 0.2 A g- 1, also it shows an excellent charge/discharge cycling stability with 96.9% capacitance retention after 10,000 cycles. The constructed symmetric supercapacitors using PVA/KOH as the gel electrolyte can deliver a specific capacitance of 60.6 F g- 1 at current density of 1 A g- 1. A maximum energy density of 21.5 Wh kg- 1 can be achieved at a power density of 800 W kg- 1, and the energy density still maintains 13.3 Wh kg- 1 even at a high power density of 16 kW kg- 1. The results suggest that this work can open up a facile and effective way to synthesize the NMCSs for electrode materials of high performance energy storage devices.

Magnetic N-doped carbon aerogel from sodium carboxymethyl cellulose/collagen composite aerogel for dye adsorption and electrochemical supercapacitor

Nitrogen-doped carbon aerogels derived from sodium carboxymethyl cellulose were prepared via a multistep approach involving sol-gel, freeze-drying, carbonization, and KOH activation processes; ferric trichloride and collagen were used as cross-linking agent and nitrogen source, respectively. The carbon aerogels exhibited well-developed porous three-dimensional morphologies, high specific surface areas, and excellent magnetic properties. When applied as electrode material, the CA-N0.5 showed a specific capacitance of 185.3F/g at the current density of 0.5A/g in a 6M KOH electrolyte. The specific capacitance retention was 90.2% after 5000 charge/discharge cycles, indicating excellent cycling stability. In addition, the carbon aerogels showed excellent adsorption capacities of 238.2 and 230.4mg/g for malachite green and methylene blue, respectively. These results suggest that N-doped carbon aerogels may be utilized as electrodes in supercapacitors as well as highly efficient contaminant adsorbents in aqueous solutions.

The Two-Dimensional Nanocomposite of Molybdenum Disulfide and Nitrogen-Doped Graphene Oxide for Efficient Counter Electrode of Dye-Sensitized Solar Cells

In this study, we reported the synthesis of the two-dimensional (2D) nanocomposite of molybdenum disulfide and nitrogen-doped graphene oxide (MoS2/nGO) as a platinum-free counter electrode (CE) for dye-sensitized solar cells (DSSCs). X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy were used to examine the characteristics of the 2D nanocomposite of MoS2/nGO. The cyclic voltammetry (CV), electrochemical impedance spectra (EIS), and the Tafel polarization measurements were carried out to examine the electrocatalytic abilities. XPS and Raman results showed the 2D behaviors of the prepared nanomaterials. HRTEM micrographs showed the direct evidence of the 2D nanocomposite of MoS2/nGO. The results of electrocatalytic examinations indicated the MoS2/nGO owning the low charge transfer resistance, high electrocatalytic activity, and fast reaction kinetics for the reduction of triiodide to iodide on the electrolyte-electrode interface. The 2D nanocomposite of MoS2/nGO combined the advantages of the high specific surface of nGO and the plenty edge sites of MoS2 and showed the promoted properties different from those of their individual constituents to create a new outstanding property. The DSSC with MoS2/nGO nanocomposite CE showed a photovoltaic conversion efficiency (PCE) of 5.95 % under an illumination of AM 1.5 (100 mW/cm(2)), which was up to 92.2 % of the DSSC with the conventional platinum (Pt) CE (PCE = 6.43 %). These results reveal the potential of the MoS2/nGO nanocomposite in the use of low-cost, scalable, and efficient Pt-free CEs for DSSCs.

Nitrogen-Doped Carbon Dots for "green" Quantum Dot Solar Cells

Considering the environment protection, "green" materials are increasingly explored for photovoltaics. Here, we developed a kind of quantum dots solar cell based on nitrogen-doped carbon dots. The nitrogen-doped carbon dots were prepared by direct pyrolysis of citric acid and ammonia. The nitrogen-doped carbon dots' excitonic absorption depends on the N-doping content in the carbon dots. The N-doping can be readily modified by the mass ratio of reactants. The constructed "green" nitrogen-doped carbon dots solar cell achieves the best power conversion efficiency of 0.79 % under AM 1.5 G one full sun illumination, which is the highest efficiency for carbon dot-based solar cells.

One-pot green hydrothermal synthesis of fluorescent nitrogen-doped carbon nanodots for in vivo bioimaging

One-pot green synthesis of fluorescent nitrogen-doped carbon nanodots (CNDs) was developed by hydrothermal treatments of biocompatible polyvinylpyrrolidone (PVP) and glycine. The fluorescent nitrogen-doped CNDs exhibited excellent water solubility, low cytotoxicity, and good salt stability for biological imaging. UV-vis spectroscopy, fluorescence spectroscopy, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) spectroscopy, and Raman spectroscopy were applied to confirm the optical and structural characteristics of the CNDs. Fluorescence of the CNDs was tunable from 417 to 450 nm adjusted by different excitation energy. Fluorescent quantum yield of the CNDs (21.43%) was significantly increased ~47.59% in comparison to that of the CNDs (14.52%) without nitrogen doping by glycine. In the in vivo imaging system (IVIS), fluorescence signal of the nitrogen-doped CNDs was obviously observed in the lungs at 12- and 24-h post-injection. Our work has shown the potential applications of the nitrogen-doped CNDs in fluorescence imaging in vivo.

N-doped carbon dots derived from bovine serum albumin and formic acid with one- and two-photon fluorescence for live cell nuclear imaging

Carbon dots with both one- and two-photon fluorescence have drawn great attention for biomedical imaging. Herein, nitrogen-doped carbon dots were facilely developed by one-pot hydrothermal method using bovine serum albumin and formic acid as carbon sources. They are highly water-soluble with strong fluorescence when excited with ultraviolet or near infrared light. The carbon dots have a diameter of ~8.32 nm and can emit strong two-photon induced fluorescence upon excitation at 750 nm with a femtosecond laser. X-ray photoelectron spectrometer analysis revealed that the carbon dots contained three components, C, N and O, corresponding to the peak at 285, 398 and 532 eV, respectively. The Fourier-transform infrared spectroscopy analysis revealed that there are carboxyl and carboxylic groups on the surface, which allowed further linking of functional molecules. pH stability study demonstrated that the carbon dots are able to be used in a wide range of pH values. The fluorescence mechanism is also discussed in this study. Importantly, these carbon dots are biocompatible and highly photostable, which can be directly applied for both one- and two-photon living cell imaging. After proper surface functionalization with TAT peptide, they can be used as fluorescent probes for live cell nuclear-targeted imaging.

Preparation and application of porous nitrogen-doped graphene obtained by co-pyrolysis of lignosulfonate and graphene oxide

Nitrogen-doped graphene with in-plane porous structure was fabricated by simple co-pyrolysis of lignosulfonate and graphene oxide in the presence of urea. Lignosulfonate first performs as a dispersant adsorbed on the surface of graphene oxide to prevent the aggregation of graphene oxide sheets for preparing homogeneous nitrogen-containing precursor, and then acts as a porogen to render graphene sheets with nanopores in the pyrolysis process of the nitrogen-containing precursor. Urea was used as a nitrogen source to incorporate nitrogen atoms into graphene basal plane. The special nanoporous structure combined with nitrogen content of 7.41at.% endows the nitrogen-doped graphene electrode material with super capacitance up to 170Fg(-1), high rate performance, and excellent cycling stability.

Solid-solid grinding/templating route to magnetically separable nitrogen-doped mesoporous carbon for the removal of Cu(2+) ions

N-doped ordered mesoporous carbon materials (NOMC) with 2D hexagonal symmetry structure were synthesized via a facile solid-solid grinding/templating route, in which the ionic liquids (ILs) of 1-cyanoethyl-3-methylimidazolium chloride and SBA-15 were employed as the precursor and hard template, respectively. The as-synthesized NOMC features with a uniform mesoporous size (3.5nm), ropes-like morphology (0.4-1μm in length) and high surface area (803m(2)/g). The quantitative analysis revealed the nitrogen content on the surface of NOMC is 5.5at%. Magnetic iron nanoparticles were successfully embedded into the carbon matrix by introducing iron chloride to the mixture of SBA-15 and ILs during the synthesis process. The NOMC-Fe composite possessed superior adsorption capacity of Cu(2+) ions (23.6mg/g). Kinetic and isothermal analysis demonstrated the strong interactions between Cu(2+) ion and the adsorbent. Furthermore, the composite was magnetically separable from solution under an external magnetic field and thus displayed a superior reusability in the recycling test.

A co-confined carbonization approach to aligned nitrogen-doped mesoporous carbon nanofibers and its application as an adsorbent

Nitrogen-doped carbon nanofibers (MCNFs) with an aligned mesoporous structure were synthesized by a co-confined carbonization method using anodic aluminum oxide (AAO) membrane and tetraethylorthosilicate (TEOS) as co-confined templates and ionic liquids as the precursor. The as-synthesized MCNFs with the diameter of 80-120nm possessed a bulk nitrogen content of 5.3wt% and bimodal mesoporous structure. The nitrogen atoms were mostly bound to the graphitic network in two forms, i.e. pyridinic and pyrrolic nitrogen, providing adsorption sites for acidic gases like SO2 and CO2. Cyclic experiments revealed a considerable stability of MCNFs over 20 runs of SO2 adsorption and 15 runs for CO2 adsorption. The MCNFs also have a preferable adsorption performance for Cd(2+).