Pesticide risk assessment in European agriculture: Distribution patterns, ban-substitution effects and regulatory implications

This study estimates the risks of agricultural pesticides on non-target organisms and the environment by combining detailed pesticide application data for 2015 with the Danish risk indicator Pesticide Load. We quantify and map the pesticide load of 59 pesticides on 28 crops and pastures in the EU. Furthermore, we investigate how recent bans on 14 pesticides in the EU could reduce pesticide use and load. Key findings show that the highest pesticide loads per hectare occur in Cyprus and the Netherlands due to high application rates and a high proportion of vegetable production. Chlorpyrifos caused the highest pesticide load per hectare on more than half of the assessed crops before its ban. The ban of 14 pesticides between 2018 and 2023 potentially reduced pesticide loads by 94%, but unobserved substitution effects could offset pesticide load reductions. Although bans on active substances are justified to control certain endpoint risks, our results highlight the potential weaknesses of bans that merely shift risks. These findings contribute to the ongoing scientific and societal discourse on efficiently mitigating pesticides' impacts on non-target organisms and the environment. However, to improve the evaluation of pesticide use, it is vital to enhance the reporting on detailed pesticide use for individual crop-pesticide combinations.

Analysis of nationwide soil pesticide pollution: Insights from China

China is a typical agricultural country that heavily relies on pesticides. Some pesticides can remain in the soil after application and thus pose a significant threat to human health. In order to characterize the status and hazards of nationwide soil contamination, this study extracted concentration data from published literature and analyzed them by a scoring approach, standard comparison and health risk assessment. For the soil pollution score, northern regions got the highest values, such as Henan (0.63), Liaoning (0.55), Heilongjiang (0.54) and Jilin (0.53), which implies high soil pesticide residues in these provinces. In contrast, Qinghai (-0.77), Guizhou (-0.64) and Tibet (-0.63) had lower scores. China's soil pesticide standards cover only 16 pesticides, and these pesticide concentrations were all below the corresponding standards. Direct exposure to soil pesticides in this study generally posed a negligible risk to children. Furthermore, pesticide dissipation and usage intensity in each province were analyzed as they were possible influences on pollution. The result showed that soil in the northern regions could accumulate more pesticides than those in the southern regions, and this geographic pattern was basically consistent with the distribution of soil pollution. However, the relationship between agricultural activities and soil pollution was less well characterized. It is recommended to establish a long-term monitoring database for pesticides and include more pesticides in regulatory frameworks. Additionally, efforts to accelerate pesticide degradation and shift the planting structure to reduce pesticide usage can help alleviate the pressure on soil from pesticides. This study can serve as a critical reference for policymakers and stakeholders in the field of agriculture.

Streamlining Pesticide Regulation Across International River Basins for Effective Transboundary Environmental Management

Pesticide standard values (PSVs) are critical for environmental management, environmental quality control, and remediation. Some countries or regions share river basins; however, their pesticide regulations are inconsistent, which could create a barrier to transboundary environmental management. To address this issue, we propose PSV scores for neighboring countries in order to promote pesticide regulatory harmonization within international river basins. Representative pesticides were selected to define PSV scores, including chemicals that are currently and historically widely used. Countries or regions from five international river basins were chosen for analysis: the Amazon, Mekong-Lancang, Rhine-Meuse, Danube, and Great Lakes. PSV scores were calculated for each of four environmental compartments: soil, surface freshwater, groundwater, and drinking water. The results revealed that current regulatory agencies lack PSVs of current used pesticides for surface freshwater. With the exception of the member states of the European Union and the Great Lakes states of the United States, the majority of basin countries or regions lack uniform pesticide regulations in environmental compartments to facilitate transboundary environmental management. In addition, PSVs have not been established for a large number of pesticides currently used in agriculture, which could lead to water contamination by pesticides used in upstream environmental compartments (e.g., croplands). Also, current PSVs do not align across environmental compartments, which could cause inter-environmental contamination by pesticides used in upstream compartments. In light of the fact that current river basins lack uniform pesticide regulations, the following recommendations are provided to promote transboundary environmental management: (1) river basin regions should collaborate on pesticide regulation establishment, (2) pesticide regulations should be aligned across environmental compartments, (3) current-use pesticides should receive more attention, and (4) quantitative approaches should be proposed for linking PSVs across environmental compartments. This study provides a regulatory tool to identify possible gaps in transboundary environmental management and improve the pesticide regulatory policies. It is expected to establish cooperation organizations to enhance regulatory communications and collaborations for transboundary environmental pesticide management.

Sensitivity of the Neotropical Solitary Bee Centris analis F. (Hymenoptera, Apidae) to the Reference Insecticide Dimethoate for Pesticide Risk Assessment

Currently, only Apis mellifera is used in environmental regulation to evaluate the hazard of pesticides to pollinators. The low representativeness of pollinators and bee diversity in this approach may result in insufficient protection for the wild species. This scenario is intensified in tropical environments, where little is known about the effects of pesticides on solitary bees. We aimed to calculate the medium lethal dose (LD50) and medium lethal concentration (LC50) of the insecticide dimethoate in the Neotropical solitary bee Centris analis, a cavity-nesting, oil-collecting bee distributed from Brazil to Mexico. Males and females of C. analis were exposed orally to dimethoate for 48 h under laboratory conditions. Lethality was assessed every 24 h until 144 h after the beginning of the test. After the LD50 calculation, we compared the value with available LD50 values in the literature of other bee species using the species sensitivity distribution curve. In 48 h of exposure, males showed an LD50 value 1.33 times lower than females (32.78 and 43.84 ng active ingredient/bee, respectively). Centris analis was more sensitive to dimethoate than the model species A. mellifera and the solitary bee from temperate zones, Osmia lignaria. However, on a body weight basis, C. analis and A. mellifera had similar LD50 values. Ours is the first study that calculated an LD50 for a Neotropical solitary bee. Besides, the results are of crucial importance for a better understanding of the effects of pesticides on the tropical bee fauna and will help to improve the risk assessment of pesticides to bees under tropical conditions, giving attention to wild species, which are commonly neglected. Environ Toxicol Chem 2023;42:2758-2767. © 2023 SETAC.

Farm-level data on production systems, farmer- and farm characteristics of apple growers in Switzerland

We here present survey data from apple growers across Switzerland. Data from 245 apple growers was collected, using an online survey in French and German in 2022. The sampled growers represent 24.4% from total land under apples. Apple production is one of the most economically relevant and pesticide intensive crops. Hence, the focus of the survey is on growers' pest management decisions and marketing strategies. Survey data contains details on growers' agronomic practices such as grown cultivars, pest management against fungi, insects, and weeds, as well as pesticide use for cosmetic purposes. Moreover, we collected information on pest management after harvest, i.e. storage loss strategies. Marketing characteristics include the sales channel chosen as well as labels used and contract arrangements with buyers. Moreover, detailed data about farm management strategies, behavioral factors, as well as other farm- and farmer characteristics was collected. Survey data is matched with a rich set of environmental data, i.e. precipitation, temperature, and apple scab infection risk.

Analyzing golf course pesticide risk across the US and Europe-The importance of regulatory environment

This study quantifies golf course pesticide risk in five regions across the US (Florida, East Texas, Northwest, Midwest, and Northeast) and three countries in Europe (UK, Denmark, and Norway) with the objective of determining how pesticide risk on golf courses varied as a function of climate, regulatory environment, and facility-level economic factors. The hazard quotient model was used to estimate acute pesticide risk to mammals specifically. Data from 68 golf courses are included in the study, with a minimum of at least five golf courses in each region. Though the dataset is small, it is representative of the population at confidence level of 75 % with a 15 % margin of error. Pesticide risk appeared to be similar across US regions with varied climates, and significantly lower in the UK, and lowest in Norway and Denmark. In the Southern US (East Texas and Florida), greens contribute most to total pesticide risk while in nearly all other regions fairways make the greatest contribution to overall pesticide risk. The relationship between facility-level economic factors such as maintenance budget was limited in most regions of the study, except in the Northern US (Midwest, Northwest, and Northeast) where maintenance and pesticide budget correlated to pesticide risk and use intensity. However, there was a strong relationship between regulatory environment and pesticide risk across all regions. Pesticide risk was significantly lower in Norway, Denmark, and the UK, where twenty or fewer active ingredients were available to golf course superintendents, than it was in US where depending on the state between 200 and 250 pesticide active ingredients were registered for use on golf courses.

Agriculture without paraquat is feasible without loss of productivity-lessons learned from phasing out a highly hazardous herbicide

A small proportion of the thousands of pesticides on the market today are associated with a disproportionately high incidence of severe acute pesticide poisoning and suicide. Paraquat stands out as one of the most lethal pesticides in common use, frequently involved in fatal incidents due to suicides or accidental exposure. Even though paraquat has been banned in over 67 countries, it is still widely used in many others, particularly in Asia and Latin America. Based on a literature review and consultations, this paper identifies options for replacing paraquat and distils practical lessons from numerous successes around the world. Our aim is to support regulators, policymakers, agronomists and the supply chain sector with practical information related to phasing out paraquat. Production data consistently failed to show any negative effects of banning paraquat on agricultural productivity. A wide range of alternative approaches to weed management and crop defoliation are available, many of which do not rely on herbicides. Over 1.25 million farmers in low- and middle-income countries (LMICs) successfully produce a range of crops for private voluntary standards (PVS) in food and fiber supply chains which prohibit paraquat use. We conclude from the findings of this study that eliminating paraquat will save lives without reducing agricultural productivity. Less hazardous and more sustainable alternatives exist. To enhance successful adoption and uptake of these methods on a wide scale, farmers require training and support within an enabling policy environment.

Screening safe pesticide application rates in crop fields for protecting consumer health: A backward model for interim recommended rates

To reduce human health risks and comply with regulatory standards, it is necessary to provide safe application rates of pesticides in crop fields. In this study, a screening-level model is proposed to improve the regulation of pesticide application rates based on the dynamiCrop platform, which can serve as a complementary approach to field trials for regulatory agencies. The screening-level model can conveniently simulate safe application rates of pesticides based on consumer health risks and maximum residue levels (MRLs). Using 2,4-D as an example, the simulation results agreed with the data of field trials under Good Agricultural Practices and demonstrated that current manufacturers' recommended application rates can effectively comply with MRLs and protect human health. In addition, we simulated the default safe application rates of 449 pesticides in five common crops using the default values of the acceptable daily intake (ADI; 0.01 mg kg^-1  day^-1 ) and MRL (0.01 mg kg^-1 ). The results demonstrated that aerial-fruit crops (e.g., tomatoes and apples) had much lower default safe application rates of pesticides than tuber crops due to the different pesticide uptake mechanisms of plants. In addition, the MRL-based default safe application rates were significantly lower than the ADI-based default rates, indicating that the default MRL of 0.01 mg kg^-1 adopted by current regulatory agencies is very conservative regarding population health risks. Although other factors, such as the variability of residue levels in crops, occupational exposure (farmers and operators), and multiple pesticide application patterns, need to be considered in future studies, our screening-level model could be used as a complementary tool in field trials to assist regulatory agencies in regulating pesticide application rates in crop fields. Integr Environ Assess Manag 2023;19:126-138. © 2022 SETAC.

Precision farming and environmental pesticide regulation in the EU-How does it fit together?

Precision farming technology allows pesticides to be applied precisely to the target while leaving the rest of the field untreated. In the regulation of pesticides, however, a homogeneously sprayed field is considered as the standard scenario. To this end, the current status of pesticide risk assessment from the perspective of terrestrial vertebrates, terrestrial invertebrates, and plants as well as aquatic organisms was examined with respect to the EU registration of a pesticide to be applied via precision farming techniques. We highlight which and how respective parts of the technical procedures could be adapted to account for this technology. Our results demonstrate that large parts of risk assessment procedures can be modified, reducing pesticide application and the exposure to the environment. However, further studies and definite procedures are essential to realistically apply, for example, area restriction in the currently required environmental risk assessment schemes. Precision farming has then great potential to achieve the political and public goal of reducing pesticide use, increasing environmental safety, and enhancing the needs of a sustainable agricultural practice. Integr Environ Assess Manag 2023;19:17-23. © 2022 SETAC.

Regulation of Paraquat for wheat crop contamination

Paraquat is a highly toxic and persistent pesticide in soil but is still used for wheat crops in many countries. Paraquat can pose potential health hazards if it is translocated from soil into wheat grains, but no study is available for its possible translocation causing wheat grain contamination. The present study aimed at finding out Paraquat residue in wheat grains under field conditions for two crop seasons to explore the sustainability of this pesticide. The experiments were conducted scientifically under field conditions at agricultural fields Pusa, Delhi, India. The soil texture was classified as sandy loam. Paraquat dichloride 24% SL (herbicide) was applied on five fields except for control field. Paraquat in wheat grains was analyzed using HPLC equipped with a photodiode array (PDA) detector. The method of analysis was validated for the pesticide residue recovery. The results showed that there was an alarming concentration of Paraquat in wheat grains ranging between 21.6 and 49.02 mg kg^-1 against maximum residue level of 0.1 mg kg^-1. Paraquat was also found in control crop (3.1 mg kg^-1) due to background residue in soil even when no Paraquat was applied. Furthermore, wheat flour samples from market also gave alarming Paraquat residue (20.39, 25.88, and 27.68 mg kg^-1). Paraquat residue was primarily dependent on % clay in field soils. More the % clay lesser was Paraquat residue in wheat grain. Thus, Paraquat was translocated from soil into wheat grains and resulted in worrying concentration of Paraquat residue in wheat grains. Consequently, use of Paraquat for wheat crops needs to be regulated as it contaminated the soil and resulted in the wheat grain contamination posing severe health hazards for humans.

TWAc-Check: A New Approach to Determine the Appropriate Use of Time-Weighted Average Concentration in Aquatic Risk Assessment

In pesticide risk assessment, regulatory acceptable concentrations for surface water bodies (RACsw,ch) are used that are derived from standard studies with continuous exposure of organisms to a test compound for days or months. These RACsw,ch are compared with the maximum tested concentration of more realistic exposure scenarios. However, the actual exposure duration could be notably shorter (e.g., hours) than the standard study, which intentionally leads to an overly conservative Tier 1 risk assessment. This discrepancy can be addressed in a risk assessment using the time-weighted average concentration (TWAc). In Europe, the applicability of TWAc for a particular risk assessment is evaluated using a complex decision scheme, which has been controversial; thus we propose an alternative approach: We used TWAc-check (which is based on the idea that the TWAc concept is just a model for aquatic risk assessment) to test whether the use of a TWAc is appropriate for such assessment. The TWAc-check method works by using predicted-measured diagrams to test how well the TWAc model predicts experimental data from peak exposure experiments. Overestimated effects are accepted because the conservatism of the TWAc model is prioritized over the goodness of fit. We illustrate the applicability of TWAc-check by applying it to various data sets for different species and substances. We demonstrate that the applicability is case dependent. Specifically, TWAc-check correctly identifies that the use of TWAc is not appropriate for early onset of effects or delayed effects. The proposed concept shows that the time window is a decisive factor as to whether or not the model is acceptable and that this concept can be used as a potential refinement option prior to the use of toxicokinetic-toxicodynamic models. Environ Toxicol Chem 2022;41:1778-1787. © 2022 Bayer AG. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Acute Toxicity of Fungicide-Insecticide-Adjuvant Combinations Applied to Almonds During Bloom on Adult Honey Bees

Beekeepers report significant honey bee deaths during and after almond bloom. These losses pose a major problem for the California almond industry because of its dependence on honey bees as pollinators. The present study aimed to determine if combinations of pesticides applied during almond bloom during daylight hours were a possible explanation for these losses. In this study we aimed to mimic the spray application route of exposure to pesticides using a Potter Spray Tower to treat adult honey bees with commonly encountered pesticides and pesticide combinations at multiples of the maximum recommended field application rates. Tested insecticides included Altacor® and Intrepid®, and tested fungicides included Tilt®, Pristine®, Luna Sensation®, and Vangard®. Synergistic toxicity was observed when the fungicide Tilt (active ingredient propiconazole) was applied with the insecticide Altacor (chlorantraniliprole), though neither caused significant mortality when applied independently. The study also looked at the effect of adding a spray adjuvant, Dyne-Amic®, to pesticide mixtures. Dyne-Amic was toxic to honey bees at concentrations above the maximum recommended field application rate, and toxicity was increased when combined with the fungicide Pristine (pyraclostrobin and boscalid). Addition of Dyne-Amic also increased toxicity of the Tilt and Altacor combination. These results suggest that application of Altacor and Tilt in combination with an adjuvant at the recommended field application rates could cause mortality in adult honey bees. These findings highlight a potential explanation for honey bee losses around almond bloom, emphasize that the safety of spray adjuvants to bees should not be assumed, and provide support for recommendations to protect bees from pesticides through application at night when bees are not foraging. Environ Toxicol Chem 2022;41:1042-1053. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Agro-ecology science relates to economic development but not global pesticide pollution

Synthetic pesticides are core features of input-intensive agriculture and act as major pollutants driving environmental change. Agroecological science has unveiled the benefits of biodiversity for pest control, but research implementation at the farm-level is still difficult. Here we address this implementation gap by using a bibliometric approach, quantifying how countries' scientific progress in agro-ecology relates to pesticide application regimes. Among 153 countries, economic development does spur scientific innovation but irregularly bears reductions in pesticide use. Some emerging economies bend the Environmental Kuznets curve (EKC) - the observed environmental pollution by a country's wealth - for pesticides and few high-income countries exhibit a weak agro-ecology 'technique effect'. Our findings support recent calls for large-scale investments in nature-positive agriculture, underlining how agro-ecology can mend the ecological resilience, carbon footprint, and human health impacts of intensive agriculture. Yet, in order to effectively translate science into practice, scientific progress needs to be paralleled by policy-change, farmer education and broader awareness-raising.

Pesticides are the dominant stressors for vulnerable insects in lowland streams

Despite elaborate regulation of agricultural pesticides, their occurrence in non-target areas has been linked to adverse ecological effects on insects in several field investigations. Their quantitative role in contributing to the biodiversity crisis is, however, still not known. In a large-scale study across 101 sites of small lowland streams in Central Europe, Germany we revealed that 83% of agricultural streams did not meet the pesticide-related ecological targets. For the first time we identified that agricultural nonpoint-source pesticide pollution was the major driver in reducing vulnerable insect populations in aquatic invertebrate communities, exceeding the relevance of other anthropogenic stressors such as poor hydro-morphological structure and nutrients. We identified that the current authorisation of pesticides, which aims to prevent unacceptable adverse effects, underestimates the actual ecological risk as (i) measured pesticide concentrations exceeded current regulatory acceptable concentrations in 81% of the agricultural streams investigated, (ii) for several pesticides the inertia of the authorisation process impedes the incorporation of new scientific knowledge and (iii) existing thresholds of invertebrate toxicity drivers are not protective by a factor of 5.3 to 40. To provide adequate environmental quality objectives, the authorisation process needs to include monitoring-derived information on pesticide effects at the ecosystem level. Here, we derive such thresholds that ensure a protection of the invertebrate stream community.

A lognormal model for evaluating maximum residue levels of pesticides in crops

To evaluate pesticide regulatory standards in agricultural crops, we introduced a regulatory modeling framework that can flexibly evaluate a population's aggregate exposure risk via maximum residue levels (MRLs) under good agricultural practice (GAP). Based on the structure of the aggregate exposure model and the nature of variable distributions, we optimized the framework to achieve a simplified mathematical expression based on lognormal variables including the lognormal sum approximation and lognormal product theorem. The proposed model was validated using Monte Carlo simulation, which demonstrates a good match for both head and tail ends of the distribution (e.g., the maximum error = 2.01% at the 99th percentile). In comparison with the point estimate approach (i.e., theoretical maximum daily intake, TMDI), the proposed model produced higher simulated daily intake (SDI) values based on empirical and precautionary assumptions. For example, the values at the 75th percentile of the SDI distributions simulated from the European Union (EU) MRLs of 13 common pesticides in 12 common crops were equal to the estimated TMDI values, and the SDI values at the 99th percentile were over 1.6-times the corresponding TMDI values. Furthermore, the model was refined by incorporating the lognormal distributions of biometric variables (i.e., food intake rate, processing factor, and body weight) and varying the unit-to-unit variability factor (VF) of the pesticide residues in crops. This ensures that our proposed model is flexible across a broad spectrum of pesticide residues. Overall, our results show that the SDI is significantly reduced, which may better reflect reality. In addition, using a point estimate or lognormal PF distribution is effective as risk assessments typically focus on the upper end of the distribution.

Emerging pesticides responsible for suicide in rural Sri Lanka following the 2008-2014 pesticide bans

Background

Sri Lanka has reduced its overall suicide rate by 70% over the last two decades through means restriction, through a series of government regulations and bans removing highly hazardous pesticides from agriculture. We aimed to identify the key pesticide(s) now responsible for suicides in rural Sri Lanka to provide data for further pesticide regulation.

Methods

We performed a secondary analysis of data collected prospectively during a cluster randomized controlled trial in the Anuradhapura district of Sri Lanka from 2011 to 16. The identity of pesticides responsible for suicides were sought from medical or judicial medical notes, coroners’ records, and the person’s family. Trend analysis was done using a regression analysis with curve estimation to identify relative importance of key pesticides.

Results

We identified 337 suicidal deaths. Among them, the majority 193 (57.3%) were due to ingestion of pesticides while 82 (24.3%) were due to hanging. A specific pesticide was identified in 105 (54.4%) of the pesticide suicides. Ingestion of carbosulfan or profenofos was responsible for 59 (56.2%) of the suicides with a known pesticide and 17.5% of all suicides. The increasing trend of suicides due to carbosulfan and profenofos over time was statistically significant (R square 0.846, F 16.541, p 0.027).

Conclusion

Ingestion of pesticides remains the most important means of suicides in rural Sri Lanka. The pesticides that were once responsible for most pesticide suicides have now been replaced by carbosulfan and profenofos. Their regulation and replacement in agriculture with less hazardous pesticides will further reduce the incidence of both pesticide and overall suicides in rural Sri Lanka.

Water Quality Impairments Due to Aquatic Life Pesticide Toxicity: Prevention and Mitigation in California, USA

The management of pesticides to protect water quality remains a significant global challenge. Historically, despite regulatory frameworks intended to prevent, minimize, and manage off-site movement of pesticides, multiple generations of pesticide active ingredients have created a seemingly unending cycle of pesticide water pollution in both agricultural and urban watersheds. In California, the most populous and most agricultural US state, pesticide and water quality regulators realized in the 1990s that working independently of each other was not an effective approach to address pesticide water pollution. Over the years, these California agencies have developed a joint vision and have continued to develop a unified approach that has the potential to minimize pesticide risks to aquatic life through a combination of prevention, monitoring, and management actions, while maintaining pesticide availability for effective pest control. Key elements of the current California pesticide/water quality effort include: 1) pesticide and toxicity monitoring, coupled with watershed modeling, to maximize information obtained from monitoring; 2) predictive fate and exposure modeling to identify potential risks to aquatic life for new pesticide products when used as allowed by the label or to identify effective mitigation measures; and 3) management approaches tailored to the different pesticide uses, discharge sources, physical environments, and regulatory environments that exist for agricultural runoff, urban runoff, and municipal wastewater. Lessons from this effort may inform pesticide management elsewhere in the world as well as other chemical regulatory programs, such as the recently reformed US Toxic Substances Control Act and California's Safer Consumer Products regulatory program. Environ Toxicol Chem 2020;39:953-966. © 2020 SETAC.

Application, monitoring and adverse effects in pesticide use: The importance of reinforcement of Good Agricultural Practices (GAPs)

This review intends to integrate the relevant information that is related to pesticide applications in food commodities and will cover three main sections. The first section encompasses some of the guidelines that have been implemented on management of pesticide application worldwide, such as the establishment of a value called Maximum Residue Level (MRL) through the application of Good Agricultural Practices (GAPs) into daily agricultural activities. A brief overview of the methods adopted in quantification of these trace residues in different food samples will also be covered. Briefly, pesticide analysis is usually performed in two stages: sample preparation and analytical instrumentation. Some of the preparation methods such as QuEChERs still remain as the technique of choice for most of the analytical scientists. In terms of the instrumentation such as the gas chromatography-mass spectrophotometry (GC-MS) and high performance-liquid chromatography (HPLC), these are still widely used, in spite of new inventions that are more sustainable and efficient such as the capillary electrophoresis (CE). Finally, the third section emphasizes on how pesticides can affect our health significantly whereby different types of pesticides result in different adverse health implications, despite its application benefits in agriculture in controlling pests. To date, there are limited reviews on pesticide usage in many agricultural-based nations; for the purpose of this review, Malaysia is selected to better illustrate pesticide regulations and implementation of policies. Finally, the review aims to provide an insight on how implementation of GAP and food safety assurance are inter-related and with this established correlation, to identify further measures for improvement to enable reinforcement of optimised agricultural practices specifically in these countries.

Evaluation of the Rhizosphere Contribution to the Environmental Fate of the Herbicide Prometryn

Plant protection products (PPPs) undergo rigorous regulatory assessment to ensure that they do not pose unacceptable risks to the environment. Elucidation of their fate and behavior in soil is an integral part of this environmental risk assessment. The active substance degradation in soil of PPPs is first assessed in laboratory studies (typically following Organisation for Economic Co-operation and Development [OECD] test guideline 307). Conditions in guideline laboratory studies are far removed from those occurring under agricultural use, and the contribution of crop roots has currently not been assessed. We integrated viable plant root systems, representative of 3 different crop types, into the OECD test guideline 307 design to assess their impact on the dissipation of the herbicide prometryn. Significantly faster decline of parent residue and higher formation of nonextractable residues were observed in all 3 planted systems. This led to a reduction in the time required for 50% of the compound to dissipate (DT50) of approximately one-half in the presence of rye grass and hot pepper and of approximately one-third in the presence of red clover. These findings imply that plants and their associated root networks can have a significant influence on PPP dissipation. Based on these data, greater environmental realism could be added to the standardized laboratory study design by the inclusion of plant root systems into higher tier studies, which, in turn, could serve to improve the environmental risk assessment process. Environ Toxicol Chem 2020;39:450-457. © 2019 SETAC.

Evaluating improvements to exposure estimates from fate and transport models by incorporating environmental sampling effort and contaminant use

Widespread chemical contamination represents one of the largest threats of the Anthropocene. The Pesticide in Water Calculator (PWC) is a fate and transport model used by the Environmental Protection Agency and Health Canada to estimate pesticide exposures in lentic freshwater ecosystems and make pesticide registration decisions. Here, we show that maximum measured concentrations of 31% of herbicides and 42% of insecticides exceeded maximum estimated environmental concentrations (EECs) produced by the PWC, suggesting that EECs often do not represent worst-case exposure as they have been purported to do. Based on this observation, we generated statistical models using EECs and over 600,000 field measurements of 31 common insecticides and herbicides to document if the congruence of EECs and maximum field measurements could be improved by accounting for environmental sampling effort (number of times a pesticide is sampled) and contaminant application, factors commonly ignored in most fate and transport models. For lentic systems, variance in pesticide field measurements explained by EECs increased by 50% when sampling effort was included. For lotic systems, variance explained increased by only 4%, most likely because lotic systems are sampled over 4.9 times as much as lentic systems. Including use more than doubled the ability of the EECs to predict maximum pesticides concentrations in lentic systems. Our results suggest that exposure characterization in risk assessment can likely be improved by considering sampling effort and use, thus providing more defensible environmental standards and regulations.

Why Regulators Lost Track and Control of Pesticide Risks: Lessons From the Case of Glyphosate-Based Herbicides and Genetically Engineered-Crop Technology

PURPOSE OF REVIEW

The approval of genetically engineered (GE) crops in the late 1990s triggered dramatic changes in corn, soybean, and cotton pest management systems, as well as complex, novel regulatory challenges. Lessons learned are reviewed and solutions described.

RECENT FINDINGS

Government-imposed resistance management provisions can work and adapt to changing circumstances, but within the private sector, pressures to gain and hold market share have thus far trumped the widely recognized need for resistance management. Risks arising from the use of formulated pesticides often exceed by a wide margin those in regulatory risk assessments based on data derived from studies on nearly 100% pure active ingredients. Innovative policy changes are needed in four problem areas: excessive faith in the accuracy of pre-market risk assessments and regulatory thresholds; post-approval monitoring of actual impacts; risk arising from formulated pesticides, rather than just pure active ingredient; challenges inherent in assessing and mitigating the combined impacts of all GE traits and associated pesticides on agroecosystems, as opposed to each trait or pesticide alone; and, tools to deal with failing pest management systems.

Modeling chemical accumulation in sediment of small waterbodies accounting for sediment transport and water-sediment exchange processes over long periods

In a recent scientific opinion of the European Food Safety Authority it is argued that the accumulation of plant protection products in sediments over long time periods may be an environmentally significant process. Therefore, the European Food Safety Authority proposed a calculation to account for plant protection product accumulation. This calculation, however, considers plant protection product degradation within sediment as the only dissipation route, and does not account for sediment dynamics or back-diffusion into the water column. The hydraulic model Hydrologic Engineering Center-River Analysis System (HEC-RAS; US Army Corps of Engineers) was parameterized to assess sediment transport and deposition dynamics within the FOrum for Co-ordination of pesticide fate models and their USe (FOCUS) scenarios in simulations spanning 20 yr. The results show that only 10 to 50% of incoming sediment would be deposited. The remaining portion of sediment particles is transported across the downstream boundary. For a generic plant protection product substance this resulted in deposition of only 20 to 50% of incoming plant protection product substance. In a separate analysis, the FOCUS TOXSWA model was utilized to examine the relative importance of degradation versus back-diffusion as loss processes from the sediment compartment for a diverse range of generic plant protection products. In simulations spanning 20 yr, it was shown that back-diffusion was generally the dominant dissipation process. The results of the present study show that sediment dynamics and back-diffusion should be considered when calculating long-term plant protection product accumulation in sediment. Neglecting these may lead to a systematic overestimation of accumulation. Environ Toxicol Chem 2017;36:3223-3231. © 2017 SETAC.

An assessment of agricultural pesticide use in Iran, 2012-2014

BACKGROUND

This is the first published assessment on agricultural pesticide use in Iran with the aim to identify pesticide products with a potential of causing acute or chronic hazard to human health. It also establishes a baseline for future comparisons and for trend assessments.

METHODS

The amounts of imported technical materials for formulation by local manufacturers as well as imported final product formulations were extracted from the registration data of the Plant Protection Organization of Iran in 2012-2014. The hazard indicators used were acute oral toxicity and chronic toxicity. For the latter, carcinogenicity, mutagenicity, and adverse effects on reproduction or development (CMR toxicity), and low Acceptable Daily Intake (ADI) were used. The comparative potential of the active ingredients of concern in terms of chronic toxicity was assessed using the average annual volume of their estimated use divided by their respective ADI, called chronic hazard potential (CHP) in the present text. The contribution of individual pesticides in different use categories to the total CHP of the user category, was also calculated, using the average annual volume of the active ingredients of all pesticides used during the period 2012-2014.

RESULTS

On average about 14,000 tonnes of agriculture pesticides, expressed in active ingredients (AI), were annually used in Iran. Herbicides constituted the largest volume (43%), followed by insecticides and acaricides (37%) and fungicides (19%). 0.1% and 47% of the formulated products met the criteria of WHO Class Ib (highly hazardous) and Class II (moderately hazardous) products respectively. Aluminium phosphide and magnesium phosphide were identified as products of primary concern and chlorpyrifos, diazinon and paraquat as products of secondary concern, in terms of their acute human health hazard. No compound in carcinogenicity category 1A or 1B or germ cell mutagenicity/reproduction toxicity category 1A was identified. Six compounds (diazinon, chlorpyrifos, dichlorvos, metam sodium, paraquat and dimethoate) were identified as products with chronic hazard potential based on a low ADI.

CONCLUSIONS

The assessment identified and prioritized agriculture pesticide used in Iran in terms of their acute and chronic hazard to human health for re-registration scheme recently established by PPO and for risk mitigation. It also set priority for research into development of alternative products and practices to minimize pesticide risks. Chronic hazard potential - amount of use adjusted with toxicity may serve as a useful point of reference for trend analysis also in the use of less hazardous agricultural pesticide products.

Hepatocytes as in vitro test system to investigate metabolite patterns of pesticides in farmed rainbow trout and common carp: Comparison between in vivo and in vitro and across species

In vitro tools using isolated primary fish hepatocytes have been proposed as a useful model to study the hepatic metabolism of xenobiotics in fish. In order to evaluate the potential of in vitro fish hepatocyte assays to provide information on in vivo metabolite patterns of pesticides in farmed fish, the present study addressed the following questions: Are in vitro and in vivo metabolite patterns comparable? Are species specific differences of metabolite patterns in vivo reflected in vitro? Are metabolite patterns obtained from cryopreserved hepatocytes comparable to those from freshly isolated cells? Rainbow trout and common carp were dosed orally with feed containing the pesticide methoxychlor (MXC) for 14days. In parallel, in vitro incubations using suspensions of freshly isolated or cryopreserved primary hepatocytes obtained from both species were performed. In vivo and in vitro samples were analyzed by thin-layer chromatography with authentic standards supported by HPLC-MS. Comparable metabolite patterns from a qualitative perspective were observed in liver in vivo and in hepatocyte suspensions in vitro. Species specific differences of MXC metabolite patterns observed between rainbow trout and common carp in vivo were well reflected by experiments with hepatocytes in vitro. Finally, cryopreserved hepatocytes produced comparable metabolite patterns to freshly isolated cells. The results of this study indicate that the in vitro hepatocyte assay could be used to identify metabolite patterns of pesticides in farmed fish and could thus serve as a valuable tool to support in vivo studies as required for pesticides approval according to the EU regulation 1107.

Landscape structure and management alter the outcome of a pesticide ERA: Evaluating impacts of endocrine disruption using the ALMaSS European Brown Hare model

There is a gradual change towards explicitly considering landscapes in regulatory risk assessment. To realise the objective of developing representative scenarios for risk assessment it is necessary to know how detailed a landscape representation is needed to generate a realistic risk assessment, and indeed how to generate such landscapes. This paper evaluates the contribution of landscape and farming components to a model based risk assessment of a fictitious endocrine disruptor on hares. In addition, we present methods and code examples for generation of landscape structures and farming simulation from data collected primarily for EU agricultural subsidy support and GIS map data. Ten different Danish landscapes were generated and the ERA carried out for each landscape using two different assumed toxicities. The results showed negative impacts in all cases, but the extent and form in terms of impacts on abundance or occupancy differed greatly between landscapes. A meta-model was created, predicting impact from landscape and farming characteristics. Scenarios based on all combinations of farming and landscape for five landscapes representing extreme and middle impacts were created. The meta-models developed from the 10 real landscapes failed to predict impacts for these 25 scenarios. Landscape, farming, and the emergent density of hares all influenced the results of the risk assessment considerably. The study indicates that prediction of a reasonable worst case scenario is difficult from structural, farming or population metrics; rather the emergent properties generated from interactions between landscape, management and ecology are needed. Meta-modelling may also fail to predict impacts, even when restricting inputs to combinations of those used to create the model. Future ERA may therefore need to make use of multiple scenarios representing a wide range of conditions to avoid locally unacceptable risks. This approach could now be feasible Europe wide given the landscape generation methods presented.

Focal bird species and risk assessment approach for nonagricultural grassland scenarios in Central Europe

The European Food Safety Authority (EFSA) guideline on risk assessment identifies pesticide exposure scenarios for nontarget wildlife; however, this scheme is not applicable to nonagricultural grassland. For example, different habitats and human utilization on golf courses attract bird communities that differ from those found in agricultural fields with annual crop cycles. The present study determined focal bird species for amenity grasslands such as golf courses following the EFSA guideline. Based on published data and bird surveys, a total of 102 species were found on 13 golf courses in Central Europe. Approximately 58% of the species were recorded on >20% of the golf course and were classified as focal species candidates. Common kestrel (Falco tinnunculus), common linnet (Carduelis cannabina), wood pigeon (Columba palumbus), yellowhammer (Emberiza citrinella), white wagtail (Motacilla alba), and gray heron (Ardea cinerea) are the most adequate candidate focal species for exposure scenarios of carnivorous, granivorous, herbivorous, omnivorous, insectivorous, and piscivorous birds, respectively. Candidate species were verified on 3 golf courses in southwestern Germany in spring 2012. Observations on feeding behavior identified the main foraging areas of focal species. The results of the field work combined with data from the literature identified reliable exposure scenarios to assess the risk of pesticides to birds found on golf courses.

Saving two birds with one stone: using active substance avian acute toxicity data to predict formulated plant protection product toxicity

Environmental safety assessments for exposure of birds require the provision of acute avian toxicity data for both the pesticidal active substance and formulated products. As an example, testing on the formulated product is waived in Europe using an assessment of data for the constituent active substance(s). This is often not the case globally, because some countries require acute toxicity tests with every formulated product, thereby triggering animal welfare concerns through unnecessary testing. A database of 383 formulated products was compiled from acute toxicity studies conducted with northern bobwhite (Colinus virginianus) or Japanese quail (Coturnix japonica) (unpublished regulatory literature). Of the 383 formulated products studied, 159 contained only active substances considered functionally nontoxic (median lethal dose [LD50] > highest dose tested). Of these, 97% had formulated product LD50 values of >2000 mg formulated product/kg (limit dose), indicating that no new information was obtained in the formulated product study. Furthermore, defined (point estimated) LD50 values for formulated products were compared with LD50 values predicted from toxicity of the active substance(s). This demonstrated that predicted LD50 values were within 2-fold and 5-fold of the measured formulated product LD50 values in 90% and 98% of cases, respectively. This analysis demonstrates that avian acute toxicity testing of formulated products is largely unnecessary and should not be routinely required to assess avian acute toxicity. In particular, when active substances are known to be functionally nontoxic, further formulated product testing adds no further information and unnecessarily increases bird usage in testing. A further analysis highlights the fact that significant reductions (61% in this dataset) could be achieved by using a sequential testing design (Organisation for Economic Co-operation and Development test guideline 223), as opposed to established single-stage designs.

Surface water mineralization of isopyrazam according to OECD 309: observations on implementation of the new data requirement within agrochemical regulation

A surface water mineralization study (according to the Organisation for Economic Co-operation and Development [OECD] guideline OECD 309) is a new requirement in European Union agrochemical regulations; therefore, industry has little experience with this test. The guideline allows for a number of options within the test design, notably the options to conduct the study under diffuse light and to include an inoculum of suspended sediment. The present study was designed to investigate the potential impact of these options on the degradation rate of a representative compound. The fungicide, isopyrazam, was chosen as it was previously shown to be susceptible to metabolism by phototrophic organisms under a fluorescent light-dark cycle. The impact of diffuse light was investigated at light intensities representative of those at depth in large, open water bodies (<7% of the incident intensity), and it was demonstrated that metabolism of isopyrazam by phototrophic microorganisms was rapid (median degradation time for 50% of the test compound [DT50] < 50 d), whereas degradation in continuous darkness was negligible. Furthermore, investigation at 2 different light intensities resulted in similar degradation rates, indicating that this transformation mechanism was not proportional to light intensity, provided that there was sufficient light for photosynthesis to occur. Inclusion of suspended sediment did not have a significant impact on the degradation rate of isopyrazam, except at extremely high sediment concentrations, which were not considered representative of conditions in large, open water bodies.