Occurrence and distribution of plastic particles (10-25,000 μm) and microfibers in the surface water of an urban river network in Japan

Urban rivers remain the key conduits conveying land-sourced plastics into the ocean. However, detailed information is limited on the concurrent evaluation over a wide array of particle size-specific abundances, characteristics, and distribution patterns of plastics in riverine environments. Therefore, this study provides a comprehensive assessment of plastic pollution in an urban river network in Japan by analyzing mesoplastics (5000-25,000 μm), large microplastics (300-5000 μm), small microplastics (SMPs, 10-300 μm), and microplastic-fibers (MPFs, 10-5000 μm) concurrently, for the first time. Sampling was conducted at seven stations in the Kamo and Katsura Rivers flowing across metropolitan Kyoto City. The analytical procedures involved infrared spectroscopy and fluorescence-staining microscopy. The concentrations of plastics were moderate compared to the global reports and gradually increased along the river flow (3550-15,840 items/m3; 180-13,180 μg/m3), mostly due to urban discharges via non-point sources. The number concentrations increased with decreasing particle size, marking 99.94% of SMPs, including 50% smaller than 40 μm. Conversely, mass concentrations decreased, exhibiting 96% larger than 1000 μm (64% mesoplastics including 20% around 5000 μm), along with 2% SMPs. Polyethylene (PE) and polyvinyl alcohol were distinct among SMPs, with PE indicating higher susceptibility to fragmentation compared to polypropylene and other polymer types. MPF concentrations were homogeneous throughout the watershed (1470-3600 items/m3; 520-1060 μg/m3), with a higher proportion of fibers smaller than 1000 μm (86%), apparently originating from polyethylene terephthalate/nylon/acrylic-like textile fibers. The proportion of MPFs surpassed particles within 100-3000 μm and was considerably high around 300 μm (> 98%). The river network of Kyoto conveys billions of tiny microplastics to the Yodo River, the primary water resource downstream, within a dry day.

Microplastics and heavy metals in shrimp Litopenaeus vannamei from the SAMARE lagoon, Gulf of California: Is it a case of combined MPs-Zn pollution in gills?

Microplastic (MPs) pollution studies in the coastal environment are increasing, as observed in the growing number of documents published yearly. However, studies regarding the combined effect of MPs and heavy metal (HMs) pollution are scarce, particularly in marine biota. Microplastics and HMs were investigated in the exoskeleton (EX), gills (GI), gastrointestinal tract (GT), and muscle (MU) of the shrimp Litopenaeus vannamei from the Santa María-La Reforma (SAMARE) lagoon, Mexico. Results showed that shrimp ingest mainly MPs of the fiber type (74.7%) and fragments (22.7%). The most frequent MP colors in the four tissues were transparent (61.4%-72.2%) and blue (3.2-36.4%) fibers. Microplastic abundance in the four tissues was 5.5 ± 0.5 MPs per individual. The predominant polymers found in most tissues were cotton and synthetic polyethylene-terephthalate (PET). Heavy metals exhibited wide variability depending on the tissue and metal; the highest Cu concentration in the GI was 138 ± 16 μg/g, while the highest Cd value was 0.40 ± 0.11 μg/g, Ni was 17.0 ± 8.3 μg/g, and Zn was 120 ± 18 μg/g in the GT. The relationship between MPs and HMs was significant and positive (p < 0.05) between MPs and Zn in the GI. This reveals a possible MPs-Zn interaction due to cotton and PET reactivity or is related to polymer manufacture. This study implies that an essential part of the world fisheries is a potential route for MPs and HMs. The problem is exacerbated due to the consumption of whole shrimp tissues consumed by humans. Considering Mexican shrimp consumption, and MPs in this study, the estimated intake was 594 MPs/capita/year. Future research requires MP monitoring in coastal lagoons that support wildlife and important fisheries and assess their effects combined with HMs.

New insights into the adsorption behavior of thiacloprid at the microfibers/water interface: Role of humic acid

Dissolved organic matter regulates the interaction between microplastics (MPs) and organic pollutants. Here, this paper investigated the effect and mechanism of humic acid (HA) on the adsorption behavior of thiacloprid at two microfibers (MFs)/water interface, and compared the differences in the performance of MFs and pure MPs. The results showed that 10 mg L^-1 HA decreased the adsorption capacity and the partition coefficient K_D of thiacloprid on MFs and pure MPs. Spectral analysis showed that HA could form hydrogen bonds and van der Waals forces with both MPs and thiacloprid, ultimately affecting the adsorption behavior of thiacloprid at MPs/water interface via competitive adsorption and bridging effect. Furthermore, two-dimensional correlation spectroscopy demonstrated that thiacloprid was preferentially adsorbed onto MPs compared with HA. Finally, density functional theory calculation demonstrated that phenolic-OH, -COOH, and alcoholic-OH played critical roles in competing adsorption and bridging effect. This study offers a theoretical foundation for a better comprehension of the adsorption behavior of organic pollutants at the MPs/water interface.

Characterization of microfibers emission from textile washing from a domestic environment

Microfibers and microplastics are widely recognized emerging pollutants, which have the potential to cause an Eco-toxicological effect. Cellulosic and synthetic fibers are being released almost equally to the environment. Synthetic fibers released were non-biodegradable resulting in a significant negative impact on the environment. In the present study, four different households using fully automated washing machines (2 top-load, 2 front-load) were studied in a domestic laundry environment under real conditions. Laundry effluents were collected and contaminants analysis was carried out. The results estimated that the average emission rate of the four households was 7,453,635 MF/7Kg (FL, H1), 7,375,500 MFs/6Kg (FL, H2), 10,692,255 MFs/7Kg (TL, H3) and 7,589,017 MFs/6.2Kg (TL, H4). Synthetic fiber's emission rate was only about 19 %, and the average length range of microfibers released was found to be in the range of ≤5 μm (48.64 %), and the least amount of emission was found in the >500 μm range (11.49 %).

Assessing Fuzzy Cognitive Mapping as a participatory and interdisciplinary approach to explore marine microfiber pollution

Fuzzy Cognitive Mapping (FCM) is a participatory modelling tool used to explore complex systems by facilitating interdisciplinary cooperation and integrating a variety of knowledge systems. Here FCM was used to explore marine microfiber pollution. Through individual interviews with representatives from the research, industry, water and environmental sectors, five stakeholder FCMs were developed and used to produce an aggregated community FCM in a stakeholder workshop. Stakeholder FCMs and the revised community FCM were used to compute how the modelled system reacted to changes under two scenarios developed during the stakeholder workshop; (i) Green Shift and (ii) increased textile consumption and production. Significant differences were observed in scenario results from the stakeholder-based models and the community-based model. For societal challenges characterized by unknowns around the problem and potential solutions, inclusion of a variety of knowledge systems through FCM and deliberation processes contribute to a more holistic picture of the system and its uncertainties.

Microplastics in the tissues of commercial semi-intensive shrimp pond-farmed Litopenaeus vannamei from the Gulf of California ecoregion

The omnipresence of microplastics (MPs) in marine and coastal environments has attracted attention owing to their effects on various organisms, including humans. We present the first study of MPs in the gastrointestinal tract (GT), gills (GI), and exoskeleton (EX) of the farmed whiteleg shrimp Litopenaeus vannamei from commercial aquaculture facilities in northwestern Mexico that have operated semi-intensively for the last two decades. We found that the number of MP items per tissue was 7.6 ± 0.6 in the GT, 6.3 ± 0.9 in the GI, and 4.3 ± 0.9 in the EX, with an average of 18.5 ± 1.2 MP items per shrimp (1.06 items/g, wet weight [ww]). MP concentrations were 261.7 ± 84.5, 13.1 ± 1.8, and 2.6 ± 0.6 items/g (ww) in the GT, GI, and EX, respectively. Microplastics ranged from 30 to 2800 μm in size (360 ± 39 μm) with fibers (∼90.8%), filament-shape (∼93.4%), and transparent (∼47.7%) being the most common ones. Polyethylene (∼54.5%) and polyamide (∼24.2%) were the most commonly identified polymers, although polyesters (∼12.1%), polystyrene (∼6.1%), and nylon (∼3.0%) were also found. The abundance of MPs in farmed L. vannamei may be related to their feeding habits and the availability of MP sources in aquaculture facilities.

The abundance and characteristics of microplastics in commonly consumed shellfish in the Jiangsu coastal region of China

Microplastic pollution is ubiquitous in the marine environment and the consumption of shellfish containing microplastics may pose a risk to human health. This study investigated the occurrence and characteristics of microplastics in three commonly consumed shellfish in the coastal region of Jiangsu Province, China. The average abundance of microplastics in shellfish varied from 0.33 to 9.33 items/individual (0.06-0.92 items/g, wet weight of soft tissue). Microplastic abundance in Jiangsu was relatively low compared to studies from other regions of China and worldwide. Synthetic fibers (66.20%) were predominant and included rayon (34.84%) and polyester (23.23%), indicating that the majority of particles originated from the discharge of clothing fibers in domestic sewage. Transparent (66.20 %) particles were the most common, particle size was generally less than 500 μm (62.30%), and abundance decreased as the particle size increased. The average annual intake of microplastics by Jiangsu coastal residents via the consumption of common bivalves was estimated to be 1088.64 items/person/year. This study provides data to support ecological and health risk assessments for microplastics in the Jiangsu coastal region.

Experimental quantification of punching shear capacity for large-scale GFRP-reinforced flat slabs made of synthetic fiber-reinforced self-compacting concrete dataset

This article provides experimental data on the punching shear behavior of synthetic fiber-reinforced slabs reinforced with glass fiber reinforced polymer (GFRP) bars and cast from self-consolidating concrete (SCC). The data was collected from tests performed on six full-scale specimens centrically loaded until failure as indicated by penetration of the column stub into the slab and achieving a sharp drop in the load carrying capacity. Three different reinforcement bar spacings were used to consider the effect of reinforcement ratio on punching shear resistance. Three of the specimens tested were reinforced by 1.25% of volume of synthetic fiber, and three were control specimens cast from regular SCC. Applied load, central deflections, and bar strain were monitored during the experiment and are provided in the supplementary data. Any future models for analyzing the punching shear behavior and capacity of flat slabs reinforced with GFRP rebars will find this data valuable for model validation, and for establishing suitable safety factors for design. Numerical studies on the simulation of fiber-reinforced concrete would also find value in this data to validate the numerical model and enable it to be used for further studies.

Microplastic fibers - Underestimated threat to aquatic organisms?

Awareness of microplastic pollution in aquatic environments increased strongly during the last decade. Environmental monitoring studies detected microplastic items in every tested water body and found them in various aquatic organisms. Yet, many studies conducted so far, refer to microplastic particles and spheres but not fibers. Microplastic fibers are often not considered due to methodological issues and high contamination risk during sampling and analysis. Only a few of the microplastic exposure studies with aquatic organisms were conducted with microplastic fibers. Recent effect studies demonstrated several negative impacts of microplastic fibers on aquatic organisms, which include tissue damage, reduced growth, and body condition and even mortality. Such negative effects were predominantly observed in taxa at the basis of the food chain. Higher taxa were less heavily affected in direct exposure experiments, but they presumably suffer from negative effects on organisms at lower food chain levels in the wild. Consequently, ongoing and future pollution with microplastic fibers may disturb the functioning of aquatic ecosystems. The present review outlines the current state of knowledge on microplastic fiber abundance in nature, bioavailability, and impacts on aquatic animals. Based on these findings, we recommend inclusion of microplastic fibers in prospective monitoring studies, discuss appropriate methods, and propose to conduct exposure studies with - as well as risk assessments of - these underestimated pollutants.

Global patterns for the spatial distribution of floating microfibers: Arctic Ocean as a potential accumulation zone

Despite their representativeness, most studies to date have underestimated the amount of microfibers (MFs) in the marine environment. Therefore, further research is still necessary to identify key processes governing MF distribution. Here, the interaction among surface water temperature, salinity, currents and winds explained the patterns of MF accumulation. The estimated density of floating MFs is ∼5900 ± 6800 items m^-3 in the global ocean; and three patterns of accumulation were predicted by the proposed model: (i) intermediate densities in ocean gyres, Seas of Japan and of Okhotsk, Mediterranean and around the Antarctic Ocean; (ii) high densities in the Arctic Ocean; and (iii) point zones of highest densities inside the Arctic Seas. Coastal areas and upwelling systems have low accumulation potential. At the same time, zones of divergences between westerlies and trade winds, located above the tropical oceanic gyres, are predicted to accumulate MFs. In addition, it is likely that the warm branch of the thermohaline circulation has an important role in the transport of MFs towards the Arctic Ocean, emphasizing that surface water masses are important predictors. This study highlights that the Arctic Ocean is a dead end for floating MFs.

Valorization of synthetic textile waste using CO2 as a raw material in the catalytic pyrolysis process

Since an invention of synthetic fibers (textiles), our life quality has been improved. However, the cumulative production and disposal of them have perceived as significant since they are not biodegradable and hard to be upcycled/recycled. From washing textiles, microplastics are released into the environment, which are regarded as emerging contaminants. As a means for source reduction of microplastics, this study proposed a rapid disposal platform for waste textiles (WTs), converting them into value-added products. To this end, catalytic pyrolysis of WT was studied. To offer more environmentally sound process, CO₂ was used as a raw material for WT pyrolysis. Thermal cracking of WT led to the production of syngas and CH₄ under the CO₂ environment. CO₂ resulted in additional CO production via gas phase reaction with volatile compounds evolved from pyrolysis of WT. To expedite the reaction kinetics for syngas formation, catalytic pyrolysis was done over Co-based catalyst. Comparing to non-catalytic pyrolysis, CO₂-assisted catalytic pyrolysis had 3- and 8-times higher production of H₂ and CO, respectively. This process also suppressed catalyst deactivation, converting more than 80 wt% of WT into syngas and CH₄. The more generation of CO from the use of CO₂ as a raw material offers an effective means to minimize the formations of harmful chemical species, such as benzene derivatives and polycyclic aromatic hydrocarbons.

Microplastic fiber diet-Fiber-supplemented pellets for small fish

Ingestion of microplastic particles and fibers is frequently reported for aquatic organisms collected in the field. At the same time, only few studies investigate potential effects of ingestion of microplastic fibers due to handling issues in the laboratory. Exposure studies, which provide organisms with microplastic fibers via the diet, are a necessary step to analyze impact thresholds of vital and fitness parameters of aquatic organisms. Based on the limited number of studies providing fish with fiber-supplemented pellets, the following protocol presents a way to prepare a diet for fish that is supplemented with homogeneous distributed microplastic fibers for exposure studies. Produced pellets are suitable for small experimental fish, such as sticklebacks (2-5 cm), and can be manufactured up to amounts of several hundred grams and even few kilograms. The method can be adapted to different commercial fish feeds and microplastic fiber types due to manual preparation.•Low-cost, manual preparation of microplastic fibers•Preparation of a pelleted fish diet with uniformly distributed fibers•Adaptable to different commercial fish feeds and microplastic fiber types.

Characteristics of microplastics in shoreline sediments from a tropical and urbanized beach (Da Nang, Vietnam)

Microplastics in shoreline sediments were investigated from Da Nang beach for the first time. Sediment samples at the two depth strata (0-5 cm and 5-10 cm) at eight sites along the entire coast were collected for identifying the characteristics of microplastics, including their concentration, size, shape, color, and nature. The synthetic fiber was the predominant type of microplastics, accounting for 99.2% of the total items. Blue (59.9%) and white (22.9%) were the most common colors of the fibers. Synthetic fibers showed a homogenous distribution at all sampling sites with a mean concentration of 9238 ± 2097 items kg^-1 d.w. Meanwhile, the fibers tended to concentrate much more at the surface stratum than the deeper stratum. A large number of synthetic fibers (81.9%) were in the size range of 300-2600 μm, which might pose a threat to marine biota and human health.

The importance of contamination control in airborne fibers and microplastic sampling: Experiences from indoor and outdoor air sampling in Aveiro, Portugal

Airborne microplastics and microfibers are released from daily materials, contaminating both indoor and outdoor air. Sampling in Aveiro, Portugal, revealed concentrations of 6 fibers m^-3, with more synthetic fibers found in outdoor than indoor (8.5% vs. 4.1%, n = 6), with variations in fiber characteristics between sampling periods. Suspected microplastics (<10 μm) also followed this trend (12 vs. 5 particles m^-3). Synthetic fibers presented peculiar characteristics, with larger median sizes of 513 μm and 90% of lighter colors. Nonetheless, numerous fibers and suspected microplastics were found in field blanks, possibly from sampling contamination, reducing the reliability of results. Few previous works have reported field blanks so far, raising concerns about the quality of their results as well. Thus, quality assurance measures should be more strictly applied when working with airborne fibers and microplastics, while more research should focus on the factors involved in the variation of concentrations and characteristics of airborne fibers.

A novel method for purification, quantitative analysis and characterization of microplastic fibers using Micro-FTIR

Microplastics pose a worldwide risk for the environment. Microplastic fibers, which are released during the household washing of synthetic fabrics, are a substantial percentage of microplastics in rivers and in oceans. A novel quantification and simultaneous identification of fiber polymers via Micro-FTIR (Fourier Transform Infrared Spectroscopy) was developed. Washing simulations with commercially available household products were performed and effluents were filtered either on GF/F filters (0.7 μm) or on Anodisc filter (0.2 μm), to gather even the smallest fibers. Furthermore, a novel purification procedure of effluents was developed. Subsequently, filters were analyzed also with the scanning electronic microscope (SEM) to confirm the width and length of fibers. This novel method is robust and replicable and it allows better quantification of fibers released and identification of fiber polymers with optimal matches (averagely 80%).

Incidence and identification of microfibers in ocean waters in Admiralty Bay, Antarctica

Antarctic pristine environment is threatened by the presence of microplastics that occur in a variety of shapes and sizes, from fibers to irregular fragments. The aim of this study is to assess the abundance, distribution, and the characterization of the microfibers in zooplankton samples found in ocean waters in Admiralty Bay, Antarctica. The samples were collected at five points in Admiralty Bay during the XXIX Brazilian Antarctic Expedition in the austral summer of 2010-2011. A total of 603 microfibers were collected in 60 samples, with an average abundance of 2.40 (± 4.57) microfibers 100 m^-3. Microfiber size ranging from ca. 10 to 22 μm in diameter of various lengths and colors (blue, red, black, and clear) was collected and characterized by scanning electron microscopy (SEM) and Raman spectroscopy. Most of these microfibers were entangled in various different zooplankton species and were identified as polymers composed mostly by polyethyleneglycols, polyurethanes, polyethylene terephthalates, and polyamides. The presence of such microfibers may cause the loss of biodiversity in the Antarctic continent, and the results presented herein can contribute to a better understanding of the impact caused by them within the food chain and human health. Graphical Abstract ᅟ.

Microplastics in wastewater: State of the knowledge on sources, fate and solutions

Microplastics are ubiquitous contaminants that could harm ecosystems. Wastewater contains microplastics and may lead to further contamination of the environment. This focus article presents a summary of current knowledge on microplastics in wastewater and possible solutions, suggesting current research needs.

Synthetic and non-synthetic anthropogenic fibers in a river under the impact of Paris Megacity: Sampling methodological aspects and flux estimations

Processed fibers are highly present in our daily life and can be either natural, artificial (regenerated cellulose) and synthetic (made with petrochemicals). Their widespread use lead inevitably to a high contamination of environment. Previous studies focus on plastic particles regardless of their type or shape as long as they are comprised between 330μm and 5mm. On the contrary, this study focuses exclusively on fibers using a smaller mesh size net (80μm) to sample freshwater. Moreover, all processed organic fibers are considered, irrespective to their nature. First, the short term temporal variability of the fibers in the environment was assessed. While exposing the sampling net during 1min a coefficient of variation of approx. 45% (with n=6) was determined. It was of only 26% (n=6) when the exposure was of 3min. The assessment of the distribution through the section showed a possible difference in concentrations between the middle of the water surface and the river banks which could be attributed to the intense river traffic within the Paris Megacity. The vertical variability seems negligible as turbulence and current conditions homogenize the distribution of the fibers. A monthly monitoring showed concentrations of 100.6±99.9fibers·m^-3 in the Marne River and of: 48.5±98.5, 27.9±26.3, 27.9±40.3 and 22.1±25.3fibers·m^-3 from the upstream to downstream points in the Seine River. Once these concentrations are converted into fluxes, it seems that the impact generated by the Paris Megacity cannot be distinguished. Investigations on the role of sedimentation and deposition on the banks are required. This study helped fill some major knowledge gaps regarding the fibers in rivers, their sampling, occurrence, spatial-temporal distribution and fluxes. It is encouraged that future studies include both synthetic and none synthetic fibers.

A first overview of textile fibers, including microplastics, in indoor and outdoor environments

Studies about microplastics in various environments highlighted the ubiquity of anthropogenic fibers. As a follow-up of a recent study that emphasized the presence of man-made fibers in atmospheric fallout, this study is the first one to investigate fibers in indoor and outdoor air. Three different indoor sites were considered: two private apartments and one office. In parallel, the outdoor air was sampled in one site. The deposition rate of the fibers and their concentration in settled dust collected from vacuum cleaner bags were also estimated. Overall, indoor concentrations ranged between 1.0 and 60.0 fibers/m³. Outdoor concentrations are significantly lower as they range between 0.3 and 1.5 fibers/m³. The deposition rate of the fibers in indoor environments is between 1586 and 11,130 fibers/day/m² leading to an accumulation of fibers in settled dust (190-670 fibers/mg). Regarding fiber type, 67% of the analyzed fibers in indoor environments are made of natural material, primarily cellulosic, while the remaining 33% fibers contain petrochemicals with polypropylene being predominant. Such fibers are observed in marine and continental studies dealing with microplastics. The observed fibers are supposedly too large to be inhaled but the exposure may occur through dust ingestion, particularly for young children.

Synthetic fibers in atmospheric fallout: A source of microplastics in the environment?

Sources, pathways and reservoirs of microplastics, plastic particles smaller than 5mm, remain poorly documented in an urban context. While some studies pointed out wastewater treatment plants as a potential pathway of microplastics, none have focused on the atmospheric compartment. In this work, the atmospheric fallout of microplastics was investigated in two different urban and sub-urban sites. Microplastics were collected continuously with a stainless steel funnel. Samples were then filtered and observed with a stereomicroscope. Fibers accounted for almost all the microplastics collected. An atmospheric fallout between 2 and 355 particles/m(2)/day was highlighted. Registered fluxes were systematically higher at the urban than at the sub-urban site. Chemical characterization allowed to estimate at 29% the proportion of these fibers being all synthetic (made with petrochemicals), or a mixture of natural and synthetic material. Extrapolation using weight and volume estimates of the collected fibers, allowed a rough estimation showing that between 3 and 10 tons of fibers are deposited by atmospheric fallout at the scale of the Parisian agglomeration every year (2500 km(2)). These results could serve the scientific community working on the different sources of microplastic in both continental and marine environments.

Microplastic contamination in brown shrimp (Crangon crangon, Linnaeus 1758) from coastal waters of the Southern North Sea and Channel area

This study assessed the capability of Crangon crangon (L.), an ecologically and commercially important crustacean, of consuming plastics as an opportunistic feeder. We therefore determined the microplastic content of shrimp in shallow water habitats of the Channel area and Southern part of the North Sea. Synthetic fibers ranging from 200μm up to 1000μm size were detected in 63% of the assessed shrimp and an average value of 0.68±0.55microplastics/g w. w. (1.23±0.99microplastics/shrimp) was obtained for shrimp in the sampled area. The assessment revealed no spatial patterns in plastic ingestion, but temporal differences were reported. The microplastic uptake was significantly higher in October compared to March. The results suggest that microplastics >20μm are not able to translocate into the tissues.