Linear Electro-Optic Effect in 2D Ferroelectric for Electrically Tunable Metalens

The advent of 2D ferroelectrics, characterized by their spontaneous polarization states in layer-by-layer domains without the limitation of a finite size effect, brings enormous promise for applications in integrated optoelectronic devices. Comparing with semiconductor/insulator devices, ferroelectric devices show natural advantages such as non-volatility, low energy consumption and high response speed. Several 2D ferroelectric materials have been reported, however, the device implementation particularly for optoelectronic application remains largely hypothetical. Here, the linear electro-optic effect in 2D ferroelectrics is discovered and electrically tunable 2D ferroelectric metalens is demonstrated. The linear electric-field modulation of light is verified in 2D ferroelectric CuInP2S6. The in-plane phase retardation can be continuously tuned by a transverse DC electric field, yielding an effective electro-optic coefficient rc of 20.28 pm V-1. The CuInP2S6 crystal exhibits birefringence with the fast axis oriented along its (010) plane. The 2D ferroelectric Fresnel metalens shows efficacious focusing ability with an electrical modulation efficiency of the focusing exceeding 34%. The theoretical analysis uncovers the origin of the birefringence and unveil its ultralow light absorption across a wide wavelength range in this non-excitonic system. The van der Waals ferroelectrics enable room-temperature electrical modulation of light and offer the freedom of heterogeneous integration with silicon and another material system for highly compact and tunable photonics and metaoptics.

Cellulose Nanostructures as Tunable Substrates for Nanocellulose-Metal Hybrid Flexible Composites

Nanocomposite represents the backbone of many industrial fabrication applications and exerts a substantial social impact. Among these composites, metal nanostructures are often employed as the active constituents, thanks to their various chemical and physical properties, which offer the ability to tune the application scenarios in thermal management, energy storage, and biostable materials, respectively. Nanocellulose, as an emerging polymer substrate, possesses unique properties of abundance, mechanical flexibility, environmental friendliness, and biocompatibility. Based on the combination of flexible nanocellulose with specific metal fillers, the essential parameters involving mechanical strength, flexibility, anisotropic thermal resistance, and conductivity can be enhanced. Nowadays, the approach has found extensive applications in thermal management, energy storage, biostable electronic materials, and piezoelectric devices. Therefore, it is essential to thoroughly correlate cellulose nanocomposites' properties with different metallic fillers. This review summarizes the extraction of nanocellulose and preparation of metal modified cellulose nanocomposites, including their wide and particular applications in modern advanced devices. Moreover, we also discuss the challenges in the synthesis, the emerging designs, and unique structures, promising directions for future research. We wish this review can give a valuable overview of the unique combination and inspire the research directions of the multifunctional nanocomposites using proper cellulose and metallic fillers.

Tunable High-Sensitivity Four-Frequency Refractive Index Sensor Based on Graphene Metamaterial

As graphene-related technology advances, the benefits of graphene metamaterials become more apparent. In this study, a surface-isolated exciton-based absorber is built by running relevant simulations on graphene, which can achieve more than 98% perfect absorption at multiple frequencies in the MWIR (MediumWavelength Infra-Red (MWIR) band as compared to the typical absorber. The absorber consists of three layers: the bottom layer is gold, the middle layer is dielectric, and the top layer is patterned with graphene. Tunability was achieved by electrically altering graphene's Fermi energy, hence the position of the absorption peak. The influence of graphene's relaxation time on the sensor is discussed. Due to the symmetry of its structure, different angles of light source incidence have little effect on the absorption rate, leading to polarization insensitivity, especially for TE waves, and this absorber has polarization insensitivity at ultra-wide-angle degrees. The sensor is characterized by its tunability, polarisation insensitivity, and high sensitivity, with a sensitivity of up to 21.60 THz/refractive index unit (RIU). This paper demonstrates the feasibility of the multi-frequency sensor and provides a theoretical basis for the realization of the multi-frequency sensor. This makes it possible to apply it to high-sensitivity sensors.

Comprehensive Parameter Space Mapping of Cell Cycle Dynamics under Network Perturbations

Studies of quantitative systems and synthetic biology have extensively utilized models to interpret data, make predictions, and guide experimental designs. However, models often simplify complex biological systems and lack experimentally validated parameters, making their reliability in perturbed systems unclear. Here, we developed a droplet-based synthetic cell system to continuously tune parameters at the single-cell level in multiple dimensions with full dynamic ranges, providing an experimental framework for global parameter space scans. We systematically perturbed a cell-cycle oscillator centered on cyclin-dependent kinase (Cdk1), enabling comprehensive mapping of period landscapes in response to network perturbations. The data allowed us to challenge existing models and refine a new model that matches the observed response. Our analysis demonstrated that Cdk1 positive feedback inhibition restricts the cell cycle frequency range, confirming model predictions; furthermore, it revealed new cellular responses to the inhibition of the Cdk1-counteracting phosphatase PP2A: monomodal or bimodal distributions across varying inhibition levels, underscoring the complex nature of cell cycle regulation that can be explained by our model. This comprehensive perturbation platform may be generalizable to exploring other complex dynamic systems.

Tunable Spin Textures in a Kagome Antiferromagnetic Semimetal via Symmetry Design

Kagome antiferromagnetic semimetals such as Mn3Sn have attracted extensive attention for their potential application in antiferromagnetic spintronics. Realizing high manipulation of kagome antiferromagnetic spin states at room temperature can reveal rich emergent phenomena resulting from the quantum interactions between topology, spin, and correlation. Here, we achieved tunable spin textures of Mn3Sn through symmetry design by controlling alternate Mn3Sn and heavy-metal Pt thicknesses. The various topological spin textures were predicted with theoretical simulations, and the skyrmion-induced topological Hall effect, strong spin-dependent scattering, and vertical gradient of spin states were obtained by magnetotransport and magnetic circular dichroism (MCD) spectroscopy measurements in Mn3Sn/Pt heterostructures. Our work provides an effective strategy for the innovative design of topological antiferromagnetic spintronic devices.

Recent Progress in Resonant Acoustic Metasurfaces

Acoustic metasurfaces, as two-dimensional acoustic metamaterials, are a current research topic for their sub-wavelength thickness and excellent acoustic wave manipulation. They hold significant promise in noise reduction and isolation, cloaking, camouflage, acoustic imaging, and focusing. Resonant structural units are utilized to construct acoustic metasurfaces with the unique advantage of controlling large wavelengths within a small size. In this paper, the recent research progresses of the resonant metasurfaces are reviewed, covering the design mechanisms and advances of structural units, the classification and application of the resonant metasurfaces, and the tunable metasurfaces. Finally, research interest in this field is predicted in future.

Dual-Functional Tunable Metasurface for Meta-Axicon with a Variable Depth of Focus and Continuous-Zoom Metalens

Optical metasurfaces have been widely investigated for their versatile ability to manipulate wavefront and miniaturize traditional optical components into ultrathin planar devices. The integration of metasurfaces with multifunctionality and tunability has fundamentally transformed optics with unprecedented control over light propagation and manipulation. This study introduces a pioneering framework for the development of tunable metasurfaces with multifunctionality, and an example of a tunable metasurface of dual functionalities is proposed and numerically verified as one of the tunable meta-axicon for generating Bessel beams with a variable depth of focus (DOF) and a continuous-zoom metalens. Specifically, this design achieves dual-functional phase modulation by helicity-multiplexing from the combination of the geometric phase as well as the propagation phase and realizes tunability for both functionalities through rotational actuation between double metasurface layers. As a result, dual functionalities with continuous tunability of the proposed TiO2 metasurface are enabled independently for the left and right circularly polarized (LCP and RCP) incidences at 532 nm. Specifically, LCP light triggers the metasurface to function as a tunable axicon, generating non-diffracting Bessel beams with variable numerical apertures (NA) and DOFs. Conversely, the RCP incidence induces it to operate as a continuous-zoom metalens and generates variable spherical wavefront focusing on diverse focal lengths. This study not only initially implements the design of tunable meta-axicon, but also achieves the integration of such a tunable meta-axicon and continuous-zoom metalens within a single metasurface configuration. The proposed device could find potential applications in biological imaging, microscopic measurement, laser fabrication, optical manipulation, multi-plane imaging, depth estimation, optical data storage, etc.

Broadband Mechanically Tunable Metasurface Reflectivity Modulator in the Visible Spectrum

Reflectivity modulation is a critical feature for applications in telecommunications, 3D imaging and printing, advanced laser machining, or portable displays. Tunable metasurfaces have recently emerged as a promising implementation for miniaturized and high-performance tunable optical components. Commonly, metasurface response tuning is achieved by electro-optical effects. In this work, we demonstrate reflectivity modulation based on a nanostructured, mechanically tunable, metasurface, consisting of an amorphous silicon nanopillar array and a suspended amorphous silicon membrane with integrated electrostatic actuators. With a membrane displacement of only 150 nm, we demonstrate reflectivity modulation by Mie resonance enhanced absorption in the pillar array, leading to a reflectivity contrast ratio of 1:3 over the spectral range from 400-530 nm. With fast, low-power electrostatic actuation and a broadband response in the visible spectrum, this mechanically tunable metasurface reflectivity modulator could enable high frame rate dynamic reflective displays.

Black Phosphorus as Tunable Van der Waals Quantum Wells with High Optical Quality

Van der Waals quantum wells, naturally formed in two-dimensional layered materials with nanoscale thickness, possess many inherent advantages over conventional molecular beam epitaxy grown counterparts, and could bring up intriguing physics and applications. However, optical transitions originated from the series of quantized states in these emerging quantum wells are still elusive. Here, we show that multilayer black phosphorus appears to be an excellent candidate for van der Waals quantum wells with well-defined subbands and high optical quality. Using infrared absorption spectroscopy, we probe subband structures of multilayer black phosphorus with tens of atomic layers, revealing clear signatures for optical transitions with subband index as high as 10, far from what was attainable previously. Surprisingly, in addition to allowed transitions, an unexpected series of "forbidden" transitions is also evidently observed, which enables us to determine energy spacings separately for conduction and valence subbands. Furthermore, the linear tunability of subband spacings by temperature and strain is demonstrated. Our results are expected to facilitate potential applications for infrared optoelectronics based on tunable van der Waals quantum wells.

Phosphorescent Metal Halide Nanoclusters for Tunable Photodynamic Therapy

Photodynamic therapy (PDT) is currently limited by the inability of photosensitizers (PSs) to enter cancer cells and generate sufficient reactive oxygen species. Utilizing phosphorescent triplet states of novel PSs to generate singlet oxygen offers exciting possibilities for PDT. Here, we report phosphorescent octahedral molybdenum (Mo)-based nanoclusters (NC) with tunable toxicity for PDT of cancer cells without use of rare or toxic elements. Upon irradiation with blue light, these molecules are excited to their singlet state and then undergo intersystem crossing to their triplet state. These NCs display surprising tunability between their cellular cytotoxicity and phototoxicity by modulating the apical halide ligand with a series of short chain fatty acids from trifluoroacetate to heptafluorobutyrate. The NCs are effective in PDT against breast, skin, pancreas, and colon cancer cells as well as their highly metastatic derivatives, demonstrating the robustness of these NCs in treating a wide variety of aggressive cancer cells. Furthermore, these NCs are internalized by cancer cells, remain in the lysosome, and can be modulated by the apical ligand to produce singlet oxygen. Thus, (Mo)-based nanoclusters are an excellent platform for optimizing PSs. Our results highlight the profound impact of molecular nanocluster chemistry in PDT applications.

THz Thin Film Varactor Based on Integrated Ferroelectric HfZrO2

In this paper, we present a broadband microwave characterization of ferroelectric hafnium zirconium oxide (Hf_0.5Zr_0.5O₂) metal-ferroelectric-metal (MFM) thin film varactor from 1 kHz up to 0.11 THz. The varactor is integrated into the back-end-of-line (BEoL) of 180 nm CMOS technology as a shunting capacitor for the coplanar waveguide (CPW) transmission line. At low frequencies, the varactor shows a slight imprint behavior, with a maximum tunability of 15% after the wake-up. In the radio- and mmWave frequency range, the varactor's maximum tunability decreases slightly from 13% at 30 MHz to 10% at 110 GHz. Ferroelectric varactors were known for their frequency-independent, linear tunability as well as low loss. However, this potential was never fully realized due to limitations in integration. Here, we show that ferroelectric HfO₂ thin films with good back-end-of-line compatibility support very large scale integration. This opens up a broad range of possible applications in the mmWave and THz frequency range such as 6G communications, imaging radar, or THz imaging.

Network-Structured BST/MBO Composites Made from Core-Shell-Structured Granulates

A finite element method (FEM)-based simulation approach to predict the tunability in composite materials was developed and tested with analytical data. These tests showed good prediction capabilities of the simulation for the test data. The simulation model was then used to predict the tunability of a network-structured composite, where the dielectric phase formed clusters in a paraelectric network. This was achieved by simulating a reciprocal core-shell unit cell of said network. The simulation showed a high tunability for this network model, exceeding the tunability of the analytically evaluated layered, columnar, and particulate model. The simulation results were experimentally verified with a Ba_0.6Sr_0.4TiO₃/Mg₃B₂O₆ (BST/MBO) composite, where core-shell granulates were made with a two-step granulation process. These structured samples showed higher tunability and dielectric loss than the unstructured samples made for comparison. Overall, the structured samples showed higher tunability to loss ratios, indicating their potential for use in tunable radio frequency applications, since they may combine high performance with little energy loss.

Visualization of Tunable Weyl Line in A-A Stacking Kagome Magnets

Kagome magnets provide a fascinating platform for a plethora of topological quantum phenomena, in which the delicate interplay between frustrated crystal structure, magnetization, and spin-orbit coupling (SOC) can engender highly tunable topological states. Here, utilizing angle-resolved photoemission spectroscopy, the Weyl lines are directly visualized with strong out-of-plane dispersion in the A-A stacked kagome magnet GdMn₆ Sn₆ . Remarkably, the Weyl lines exhibit a strong magnetization-direction-tunable SOC gap and binding energy tunability after substituting Gd with Tb and Li, respectively. These results not only illustrate the magnetization direction and valence counting as efficient tuning knobs for realizing and controlling distinct 3D topological phases, but also demonstrate AMn₆ Sn₆ (A = rare earth, or Li, Mg, or Ca) as a versatile material family for exploring diverse emergent topological quantum responses.

Tunable Light Field Modulations with Chip- and Fiber-Compatible Monolithic Dielectric Metasurfaces

Metasurfaces with a high engineering degree of freedom are promising building blocks for applications in metalenses, beam deflectors, metaholograms, sensing, and many others. Though the fundamental and technological challenges, proposing tunable metasurfaces is still possible. Previous efforts in this field are mainly taken on designing sophisticated structures with active materials introduced. Here, we present a generic kind of monolithic dielectric metasurfaces for tunable light field modulations. Changes in the period number and surrounding refractive index enable discrete and continuous modulations of spatial light fields, respectively. We exemplify this concept in monolithic Lithium Niobate metasurfaces for tunable metalenses and beam deflectors. The utilization of monolithic dielectric materials facilitates the ready integration of the metasurfaces with both chip and optical fiber platforms. This concept is not limited by the availability of active materials or expensive and time-consuming fabrication techniques, which can be applied to any transparent dielectric materials and various optical platforms.

Impact of Particle and Crystallite Size of Ba0.6Sr0.4TiO3 on the Dielectric Properties of BST/P(VDF-TrFE) Composites in Fully Printed Varactors

In the field of printed electronics, electronic components such as varactors are of special interest. As ferroelectric materials, Ba_0.6Sr_0.4TiO₃ (BST) and poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) are promising compounds to be used in functional inks for the fabrication of fully inkjet-printed dielectric layers. In BST/P(VDF-TrFE) composite inks, the influence of the particle and crystallite size is investigated by using different grinding media sizes and thermal treatments at varying temperatures. It was found that with an increasing particle and crystallite size, both the relative permittivity and tunability increase as well. However, the thermal treatment which impacts both the particle and crystallite size has a greater effect on the dielectric properties. An additional approach is the reduction in the dielectric layer thickness, which has a significant effect on the maximal tunability. Here, with a thickness of 0.9 µm, a tunability of 29.6% could be achieved in an external electric field of 34 V µm^-1.

Prediction of negative refraction in Dirac semimetal metamaterial

Negative refraction materials are indispensable building blocks in the optoelectric devices for their unique functionalities of controlling the light propagations, such as, superlens and transformation optics. However, material realizations of negative refraction are still limited to the conventional metals, semiconductors as well as magnetic materials. Here, we show that three dimensional Dirac semimetals have the opportunity to enable the negative refraction, which can be achieved through alternatively stacking three dimensional Dirac semimetals and the dielectric layers together. It is found that the effective perpendicular and parallel permittivities in this multilayered stack display the respective negative and positive values over a certain frequency region, which enables its negative group refractive angle and it can be controlled by the Fermi energy of Dirac semimetals. The spectra of transmittance in the multilayered structure for transverse magnetic wave also reveals an incident angle-independent transmittance dip, which originates from the zero value of the real part of the effective perpendicular permittivity. Our findings unveil the essential role of three dimensional Dirac semimetals in producing the negative group refraction responses and promise their applications in the metamaterial-based devices.

Active and Passive Tuning of Ultranarrow Resonances in Polaritonic Nanoantennas

Optical nanoantennas are of great importance for photonic devices and spectroscopy due to their capability of squeezing light at the nanoscale and enhancing light-matter interactions. Among them, nanoantennas made of polar crystals supporting phonon polaritons (phononic nanoantennas) exhibit the highest quality factors. This is due to the low optical losses inherent in these materials, which, however, hinder the spectral tuning of the nanoantennas due to their dielectric nature. Here, active and passive tuning of ultranarrow resonances in phononic nanoantennas is realized over a wide spectral range (≈35 cm^-1 , being the resonance linewidth ≈9 cm^-1 ), monitored by near-field nanoscopy. To do that, the local environment of a single nanoantenna made of hexagonal boron nitride is modified by placing it on different polar substrates, such as quartz and 4H-silicon carbide, or covering it with layers of a high-refractive-index van der Waals crystal (WSe₂ ). Importantly, active tuning of the nanoantenna polaritonic resonances is demonstrated by placing it on top of a gated graphene monolayer in which the Fermi energy is varied. This work presents the realization of tunable polaritonic nanoantennas with ultranarrow resonances, which can find applications in active nanooptics and (bio)sensing.

Tunable Aziridinium Ylide Reactivity: Non-covalent Interactions Enable Divergent Product Outcomes

Methods for rapid preparation of densely functionalized and stereochemically complex N-heterocyclic scaffolds are in demand for exploring potential bioactive chemical space. This work describes experimental and computational studies to better understand the features of aziridinium ylides as intermediates for the synthesis of highly substituted dehydromorpholines. The development of this chemistry has enabled the extension of aziridinium ylide chemistry to the concomitant formation of both a C-N and a C-O bond in a manner that preserves the stereochemical information embedded in the substrate. Additionally, we have uncovered several key insights that describe the importance of steric effects, rotational barriers around the C-N bond of the aziridinium ylide, and non-covalent interactions (NCIs) on the ultimate reaction outcome. These critical insights will assist in the further development of this chemistry to generate N-heterocycles that will further expand complex amine chemical space.

Multilevel Absorbers via the Integration of Undoped and Tungsten-Doped Multilayered Vanadium Dioxide Thin Films

Reconfigurable light absorbers have attracted much attention by providing additional optical responses and expanding the number of degrees of freedom in security applications. Fabry-Pèrot absorbers based on phase change materials with tunable properties can be implemented over large scales without the need for additional steps such as lithography, while exhibiting reconfigurable optical responses. However, a fundamental limitation of widely used phase change materials such as vanadium dioxide and germanium-antimony-tellurium-based chalcogenide glasses is that they have only two distinct phases; therefore, only two different states of optical properties are available. Here, we experimentally demonstrate active multilevel absorbers that are tuned by controlling the external temperature. This is produced by creating large-scale lithography-free multilayer structures with both undoped and tungsten-doped solution-processed monoclinic-phase vanadium dioxide thin films. The doping of vanadium dioxide with tungsten allows for the modulation of the phase-transition temperature, which results in an extra degree of freedom and therefore an additional step for the tunable properties. The proposed multilevel absorber is designed and characterized both numerically and experimentally. Such large-scale multilevel tunable absorbers realized with nanoparticle-based solution fabrication techniques are expected to open the way for advanced thermo-optical cryptographic devices based on tunable reflective coloration and near-infrared absorption.

Narrowband Deep-Blue Multi-Resonance Induced Thermally Activated Delayed Fluorescence: Insights from the Theoretical Molecular Design

Multi-resonance thermal activated delayed fluorescence (MR-TADF) has been promising with large oscillator strength and narrow full width at half maxima of luminescence, overcoming the compromise of emission intensity and energy criteria of traditional charge transfer TADF frameworks. However, there are still limited theoretical investigations on the excitation mechanism and systematic molecular manipulation of MR-TADF structures. We systematically study the highly localized excitation (LE) characteristics based on typical blue boron-nitrogen (BN) MR-TADF emitters and prove the potential triangular core with theoretical approaches. A design strategy by extending the planar π-conjugate core structure is proposed to enhance the multiple resonance effects. Moreover, several substituted groups are introduced to the designed core, achieving color-tunable functions with relatively small energy split and strong oscillator strength simultaneously. This work provides a theoretical direction for molecular design strategy and a series of potential candidates for highly efficient BN MR-TADF emitters.

Manipulating Color Emission in 2D Hybrid Perovskites by Fine Tuning Halide Segregation: A Transparent Green Emitter

Halide perovskite materials offer an ideal playground for easily tuning their color and, accordingly, the spectral range of their emitted light. In contrast to common procedures, this work demonstrates that halide substitution in Ruddlesden-Popper perovskites not only progressively modulates the bandgap, but it can also be a powerful tool to control the nanoscale phase segregation-by adjusting the halide ratio and therefore the spatial distribution of recombination centers. As a result, thin films of chloride-rich perovskite are engineered-which appear transparent to the human eye-with controlled tunable emission in the green. This is due to a rational halide substitution with iodide or bromide leading to a spatial distribution of phases where the minor component is responsible for the tunable emission, as identified by combined hyperspectral photoluminescence imaging and elemental mapping. This work paves the way for the next generation of highly tunable transparent emissive materials, which can be used as light-emitting pixels in advanced and low-cost optoelectronics.

Ultra Narrow Dual-Band Perfect Absorber Based on a Dielectric-Dielectric-Metal Three-Layer Film Material

This paper proposes a perfect metamaterial absorber based on a dielectric-dielectric-metal structure, which realizes ultra-narrowband dual-band absorption in the near-infrared band. The maximum Q factor is 484. The physical mechanism that causes resonance is hybrid coupling between magnetic polaritons resonance and plasmon resonance. At the same time, the research results show that the intensity of magnetic polaritons resonance is much greater than the intensity of the plasmon resonance. By changing the structural parameters and the incident angle of the light source, it is proven that the absorber is tunable, and the working angle tolerance is 15°. In addition, the sensitivity and figure of merit when used as a refractive index sensor are also analyzed. This design provides a new idea for the design of high-Q optical devices, which can be applied to photon detection, spectral sensing, and other high-Q multispectral fields.

Density-Dependent Emission Colors from a Conformation-Switching Chromophore in Polyurethanes

Achieving full-color emission from a single chromophore is not only highly desirable from practical considerations, but also greatly challenging for fundamental research. Herein, we demonstrated the density-dependent emission colors from a single boron-containing chromophore, from which multi-color fluorescent polyurethanes were prepared as well. Originating from its switchable molecular conformations, the emission color of the chromophore was found to be governed by the packing density and strongly influenced by hydrogen bonding interactions. The chromophore was incorporated into polyurethanes to achieve full-color emitting materials; the emission color was only dependent on the chromophore density and could be tuned via synthetic approach by controlling the compositions. The emission colors could also be modulated by physical approaches, including by swelling/deswelling process, compression under high pressure, and even blending the fluorescent polyurethane with non-emitting ones.

Relaxor-Ferroelectric Films for Dielectric Tunable Applications: Effect of Film Thickness and Applied Electric Field

The dielectric properties, tunability and figure-of-merit (FOM) of relaxor Pb0.9La0.1(Zr0.52Ti0.48)O3 (PLZT) films have been investigated. Dielectric measurements indicated that the dielectric constant (at zero-bias field), tunability and FOM are enhanced as the film thickness increases, which are mainly attributed to the presence of an interfacial layer near the film-electrode interface. Experimental results illustrated that a slight reduction is observed in both dielectric constant and tunability (-2%) in a wide-frequency range (10 kHz-1 MHz); meanwhile, the FOM value decreases significantly (-17%) with increasing frequency, arising from the higher dielectric loss value. The 1000-nm PLZT film shows the largest tunability of 94.6% at a maximum electric-field of 1450 kV/cm, while the highest FOM factor is 37.6 at 1000 kV/cm, due to the combination of medium tunability (88.7%) and low dielectric loss (0.0236). All these excellent results indicated that the relaxor PLZT films are promising candidates for specific applications in microwave devices.

Multiple Sharp Fano Resonances in a Deep-Subwavelength Spherical Hyperbolic Metamaterial Cavity

We theoretically study the multiple sharp Fano resonances produced by the near-field coupling between the multipolar narrow plasmonic whispering-gallery modes (WGMs) and the broad-sphere plasmon modes supported by a deep-subwavelength spherical hyperbolic metamaterial (HMM) cavity, which is constructed by five alternating silver/dielectric layers wrapping a dielectric nanosphere core. We find that the linewidths of WGMs-induced Fano resonances are as narrow as 7.4–21.7 nm due to the highly localized feature of the electric fields. The near-field coupling strength determined by the resonant energy difference between WGMs and corresponding sphere plasmon modes can lead to the formation of the symmetric-, asymmetric-, and typical Fano lineshapes in the far-field extinction efficiency spectrum. The deep-subwavelength feature of the proposed HMM cavity is verified by the large ratio (~5.5) of the longest resonant wavelength of WGM_1,1 (1202.1 nm) to the cavity size (diameter: 220 nm). In addition, the resonant wavelengths of multiple Fano resonances can be easily tuned by adjusting the structural/material parameters (the dielectric core radius, the thickness and refractive index of the dielectric layers) of the HMM cavity. The narrow linewidth, multiple, and tunability of the observed Fano resonances, together with the deep-subwavelength feature of the proposed HMM cavity may create potential applications in nanosensors and nanolasers.

Tunable Terahertz Metamaterial with Electromagnetically Induced Transparency Characteristic for Sensing Application

We present and demonstrate a MEMS-based tunable terahertz metamaterial (TTM) composed of inner triadius and outer electric split-ring resonator (eSRR) structures. With the aim to explore the electromagnetic responses of TTM device, different geometrical parameters are compared and discussed to optimize the suitable TTM design, including the length, radius, and height of TTM device. The height of triadius structure could be changed by using MEMS technique to perform active tunability. TTM shows the polarization-dependent and electromagnetic induced transparency (EIT) characteristics owing to the eSRR configuration. The electromagnetic responses of TTM exhibit tunable characteristics in resonance, polarization-dependent, and electromagnetically induced transparency (EIT). By properly tailoring the length and height of the inner triadius structure and the radius of the outer eSRR structure, the corresponding resonance tuning range reaches 0.32 THz. In addition to the above optical characteristics of TTM, we further investigate its potential application in a refraction index sensor. TTM is exposed on the surrounding ambient with different refraction indexes. The corresponding key sensing performances, such as figure of merit (FOM), sensitivity (S), and quality factor (Q-factor) values, are calculated and discussed, respectively. The calculated sensitivity of TTM is 0.379 THz/RIU, while the average values of Q-factor and FOM are 66.01 and 63.83, respectively. These characteristics indicate that the presented MEMS-based TTM device could be widely used in tunable filters, perfect absorbers, high-efficient environmental sensors, and optical switches applications for THz-wave optoelectronics.

Tuning Strain Sensor Performance via Programmed Thin-Film Crack Evolution

Stretchable strain sensors with well-controlled sensitivity and stretchability are crucial for applications ranging from large deformation monitoring to subtle vibration detection. Here, based on single-metal material on the elastomer and one-pot evaporation fabrication method, we realize controlled strain sensor performance via a novel programable cracking technology. Specifically, through elastomeric substrate surface chemistry modification, the microcrack generation and morphology evolution of the strain sensing layer is controlled. This process allows for fine tunability of the cracked film morphology, resulting in strain sensing devices with a sensitivity gauge factor of over 10 000 and stretchability up to 100%. Devices with a frequency response up to 5.2 Hz and stability higher than 1000 cycles are reported. The reported strain sensors, tracking both subtle and drastic mechanical deformations, are demonstrated in healthcare devices, human-machine interaction, and smart-home applications.

Performance tunability of field-effect transistors using MoS2(1-x)Se2xalloys

Ultra-thin channel materials with excellent tunability of their electronic properties are necessary for the scaling of electronic devices. Two-dimensional materials such as transition metal dichalcogenides (TMDs) are ideal candidates for this due to their layered nature and great electrostatic control. Ternary alloys of these TMDs show composition-dependent electronic structure, promising excellent tunability of their properties. Here, we systematically compare molybdenum sulphoselenide (MoS_2(1-x)Se_2x) alloys, MoS₁Se₁and MoS_0.4Se_1.6. We observe variations in strain and carrier concentration with their composition. Using them, we demonstrate n-channel field-effect transistors (FETs) with SiO₂and high-kHfO₂as gate dielectrics, and show tunability in threshold voltage, subthreshold slope (SS), drain current, and mobility. MoS₁Se₁shows better promise for low-power FETs with a minimum SS of 70 mV dec^-1, whereas MoS_0.4Se_1.6, with its higher mobility, is suitable for faster operations. Using HfO₂as gate dielectric, there is an order of magnitude reduction in interface traps and 2× improvement in mobility and drain current, compared to SiO₂. In contrast to MoS₂, the FETs on HfO₂also display enhancement-mode operation, making them better suited for CMOS applications.

Static and Dynamic Analysis of Electrostatically Actuated MEMS Shallow Arches for Various Air-Gap Configurations

In this research, we investigate the structural behavior, including the snap-through and pull-in instabilities, of in-plane microelectromechanical COSINE-shaped and electrically actuated clamped-clamped micro-beams resonators. The work examines various electrostatic actuation patterns including uniform and non-uniform parallel-plates airgap arrangements, which offer options to actuate the arches in the opposite and same direction of their curvature. The nonlinear equation of motion of a shallow arch is discretized into a reduced-order model based on the Galerkin's expansion method, which is then numerically solved. Static responses are examined for various DC electrostatic loads starting from small values to large values near pull-in and snap-through instability ranges, if any. The eigenvalue problem of the micro-beam is solved revealing the variations of the first four natural frequencies as varying the DC load. Various simulations are carried out for several case studies of shallow arches of various geometrical parameters and airgap arrangements, which demonstrate rich and diverse static and dynamic behaviors. Results show few cases with multi-states and hysteresis behaviors where some with only the pull-in instability and others with both snap-through buckling and pull-in instabilities. It is found that the micro-arches behaviors are very sensitive to the electrode's configuration. The studied configurations reveal different possibilities to control the pull-in and snap-through instabilities, which can be used for improving arches static stroke range as actuators and for realizing wide-range tunable micro-resonators.

Cu-Sb-S Ternary Semiconductor Nanoparticle Plasmonics

Semiconductor plasmonics is a recently emerging field that expands the chemical and physical bandwidth of the hitherto well-established noble metallic nanoparticles. Achieving tunable plasmonics from colloidal semiconductor nanocrystals has drawn enormous interest and is promising for plasmon-related applications. However, realizing this goal of tunable semiconductor nanocrystals is currently still a synthetic challenge. Here, we report a colloidal synthesis strategy for highly dispersed, platelet-shaped, antimony-doped copper sulfide semiconductor nanocrystals (Sb_y-Cu_xS NCs) with a dominant localized surface plasmon resonance (LSPR) band tunable from the near-infrared into the midvisible spectral range. This work presents the synthesis and quantifies the resulting plasmonic features. It furthermore elucidates the underlying carrier concentration requirements to realize a continuum of LSPR spectra. Building on our previous work on binary plasmonics Cu_xS, Cu_xSe, and Cu_xTe NCs, the present method introduces a much wider and finer tunability with ternary semiconductor plasmonics.

Tunable, division-independent control of gene activation timing by a polycomb switch

During development, progenitors often differentiate many cell generations after receiving signals. These delays must be robust yet tunable for precise population size control. Polycomb repressive mechanisms, involving histone H3 lysine-27 trimethylation (H3K27me3), restrain the expression of lineage-specifying genes in progenitors and may delay their activation and ensuing differentiation. Here, we elucidate an epigenetic switch controlling the T cell commitment gene Bcl11b that holds its locus in a heritable inactive state for multiple cell generations before activation. Integrating experiments and modeling, we identify a mechanism where H3K27me3 levels at Bcl11b, regulated by methyltransferase and demethylase activities, set the time delay at which the locus switches from a compacted, silent state to an extended, active state. This activation delay robustly spans many cell generations, is tunable by chromatin modifiers and transcription factors, and is independent of cell division. With their regulatory flexibility, such timed epigenetic switches may broadly control timing in development.

A Spoof Surface Plasmon Polaritons (SSPPs) Based Dual-Band-Rejection Filter with Wide Rejection Bandwidth

This paper presents a novel single-layer dual band-rejection-filter based on Spoof Surface Plasmon Polaritons (SSPPs). The filter consists of an SSPP-based transmission line, as well as six coupled circular ring resonators (CCRRs) etched among ground planes of the center corrugated strip. These resonators are excited by electric-field of the SSPP structure. The added ground on both sides of the strip yields tighter electromagnetic fields and improves the filter performance at lower frequencies. By removing flaring ground in comparison to prevalent SSPP-based constructions, the total size of the filter is significantly decreased, and mode conversion efficiency at the transition from co-planar waveguide (CPW) to the SSPP line is increased. The proposed filter possesses tunable rejection bandwidth, wide stop bands, and a variety of different parameters to adjust the forbidden bands and the filter’s cut-off frequency. To demonstrate the filter tunability, the effect of different elements like number (n), width (WR), radius (RR) of CCRRs, and their distance to the SSPP line (yR) are surveyed. Two forbidden bands, located in the X and K bands, are 8.6–11.2 GHz and 20–21.8 GHz. As the proof-of-concept, the proposed filter was fabricated, and a good agreement between the simulation and experiment results was achieved.

Au-Encapsulated Fe Nanorods in Oxide Matrix with Tunable Magneto-Optic Coupling Properties

Materials with magneto-optic coupling properties are highly coveted for their potential applications ranging from spintronics and optical switches to sensors. In this work, a new, three-phase Au-Fe-La_0.5Sr_0.5FeO₃ (LSFO) hybrid material grown in a vertically aligned nanocomposite (VAN) form has been demonstrated. This three-phase hybrid material combines the strong ferromagnetic properties of Fe and the strong plasmonic properties of Au and the dielectric nature of the LSFO matrix. More interestingly, the immiscible Au and Fe phases form Au-encapsulated Fe nanopillars, embedded in the LSFO matrix. Multifunctionalities including anisotropic optical dielectric properties, plasmonic properties, magnetic anisotropy, and room-temperature magneto-optic Kerr effect coupling are demonstrated. The single-step growth method to grow the immiscible two-metal nanostructures (i.e., Au and Fe) in the complex hybrid material form opens exciting new potential opportunities for future three-phase VAN systems with more versatile metal selections.

Influence of the Core Formulation on Features and Drug Delivery Ability of Carbamate-Based Nanogels

In the last years, nanogels have emerged as one of the most promising classes of novel drug delivery vehicles since they can be employed in multiple fields, such as various therapeutics or diagnostics, and with different classes of compounds and active molecules. Their features, such as a high volume to surface ratio, excellent drug loading and release ability, as well as biocompatibility and tunable behavior, are unique, and, nowadays, great efforts are made to develop new formulations that can be employed in a wider range of applications. Polyethylene glycol (PEG)-polyethylenimine (PEI) nanogels probably represent the baseline of this class of biomaterials and they are still largely employed and studied. In any way, the possibility to exploit new core formulations for nanogels is certainly very interesting in order to understand the influence of different polymer chains on the final properties of the system. In this research, we explore and make a comparison between PEG-PEI nanogels and two other different formulations: pluronic F127-PEI nanogels and PEG-Jeffamine nanogels. We propose nanogels synthesis methods, their chemical and physical characterization, as well as their stability analysis, and we focus on the different drug delivery ability that these structures exhibit working with different typologies of drug mimetics.

Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds

Tissue engineering (TE) aims to regenerate critical size defects, which cannot heal naturally, by using highly porous matrices called TE scaffolds made of biocompatible and biodegradable materials. There are various manufacturing techniques commonly used to fabricate TE scaffolds. However, in most cases, they do not provide materials with a highly interconnected pore design. Thus, emulsion templating is a promising and convenient route for the fabrication of matrices with up to 99% porosity and high interconnectivity. These matrices have been used for various application areas for decades. Although this polymer structuring technique is older than TE itself, the use of polymerised internal phase emulsions (PolyHIPEs) in TE is relatively new compared to other scaffold manufacturing techniques. It is likely because it requires a multidisciplinary background including materials science, chemistry and TE although producing emulsion templated scaffolds is practically simple. To date, a number of excellent reviews on emulsion templating have been published by the pioneers in this field in order to explain the chemistry behind this technique and potential areas of use of the emulsion templated structures. This particular review focusses on the key points of how emulsion templated scaffolds can be fabricated for different TE applications. Accordingly, we first explain the basics of emulsion templating and characteristics of PolyHIPE scaffolds. Then, we discuss the role of each ingredient in the emulsion and the impact of the compositional changes and process conditions on the characteristics of PolyHIPEs. Afterward, current fabrication methods of biocompatible PolyHIPE scaffolds and polymerisation routes are detailed, and the functionalisation strategies that can be used to improve the biological activity of PolyHIPE scaffolds are discussed. Finally, the applications of PolyHIPEs on soft and hard TE as well as in vitro models and drug delivery in the literature are summarised.

Two-Component Biosensors: Unveiling the Mechanisms of Predictable Tunability

Many studies have been devoted to the engineering of cellular biosensors by exploiting intrinsic natural sensors. However, biosensors rely not only on input detection but also on an adequate response range. It is therefore often necessary to tune natural systems to meet the demands of specific applications in a predictable manner. In this study, we explored the customizability of two-component bacterial biosensors by modulating the main biosensor component, i.e., the receptor protein. We developed a mathematical model that describes the functional relationship between receptor abundance and activation threshold, sensitivity, dynamic range, and operating range. The defined mathematical framework allows the design of the genetic architecture of a two-component biosensor that can perform as required with minimal genetic engineering. To experimentally validate the model and its predictions, a library of biosensors was constructed. The good agreement between theoretical designs and experimental results indicates that modulation of receptor protein abundance allows optimization of biosensor designs with minimal genetic engineering.

Dynamic Absorption Enhancement and Equivalent Resonant Circuit Modeling of Tunable Graphene-Metal Hybrid Antenna

Plasmonic antennas are attractive optical components of the optoelectronic devices, operating in the far-infrared regime for sensing and imaging applications. However, low optical absorption hinders its potential applications, and their performance is limited due to fixed resonance frequency. In this article, a novel gate tunable graphene-metal hybrid plasmonic antenna with stacking configuration is proposed and investigated to achieve tunable performance over a broad range of frequencies with enhanced absorption characteristics. The hybrid graphene-metal antenna geometry is built up with a hexagon radiator that is supported by the Al₂O₃ insulator layer and graphene reflector. This stacked structure is deposited in the high resistive Si wafer substrate, and the hexagon radiator itself is a sandwich structure, which is composed of gold hexagon structure and two multilayer graphene stacks. The proposed antenna characteristics i.e., tunability of frequency, the efficiency corresponding to characteristics modes, and the tuning of absorption spectra, are evaluated by full-wave numerical simulations. Besides, the unity absorption peak that was realized through the proposed geometry is sensitive to the incident angle of TM-polarized incidence waves, which can flexibly shift the maxima of the absorption peak from 30 THz to 34 THz. Finally, an equivalent resonant circuit model for the investigated antenna based on the simulations results is designed to validate the antenna performance. Parametric analysis of the proposed antenna is carried out through altering the geometric parameters and graphene parameters in the Computer Simulation Technology (CST) studio. This clearly shows that the proposed antenna has a resonance frequency at 33 THz when the graphene sheet Fermi energy is increased to 0.3 eV by applying electrostatic gate voltage. The good agreement of the simulation and equivalent circuit model results makes the graphene-metal antenna suitable for the realization of far-infrared sensing and imaging device containing graphene antenna with enhanced performance.

Tunable and Ultraefficient Microwave Absorption Properties of Trace N-Doped Two-Dimensional Carbon-Based Nanocomposites Loaded with Multi-Rare Earth Oxides

A high efficiency and great tunability of bandwidth and absorption-range electromagnetic wave absorber is proposed without precedent. A series of 2D carbon-based nanocomposites with the loading of cerium oxide (CN-Ce) and other types of rare earth oxides (CN-REOs) can be successfully synthesized by a simple solvothermal-sintering method. As-synthesized 2D nanocomposites with local graphite-like C₃ N₄ structure and trace N-doped are identified by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. The CN-REOs and polyvinylidene fluoride composite absorbers with reflection loss values above -40 dB are obtained in C-band, X-band, and Ku-band, respectively. The empirical rules on effective bandwidth and frequency range are discovered and summarized, which can be successfully realized by simply tuning the doping amount or type of REO. The mechanism is explained by enhanced attenuation and tunable impedance matching. In addition co-filled samples by two types of CN-REOs nanocomposites are prepared to support these findings and inspire the preparation of absorber with desirable frequency band in the range of 2-18 GHz.

Curvature-Controlled Wrinkling Surfaces for Friction

Topographical patterns endow material surfaces with unique and intriguing physical and chemical properties. Spontaneously formed wrinkling has been harnessed to generate surface topography for various functionalities. Despite promising applications in biomedical devices and robot engineering, the friction behavior of wrinkling on curved surfaces remains unclear. Herein, wrinkled surfaces are induced by sputtering metals on soft polymer microspheres. The wrinkle morphologies and length scales can be controlled precisely by tailoring the microsphere radius (substrate curvature) and film thickness. The wrinkled surfaces exhibit controlled friction property, depending on the wrinkling patterns and length scales. An increase in friction force with increasing surface roughness is generally found for dimple patterns and labyrinth patterns. The dimple patterns show the lowest friction due to strong curvature constraint. The herringbone patterns exhibit apparent friction anisotropy with respect to topographic orientation. These results will guide future design of wrinkled surfaces for friction by harnessing substrate curvature.

Highly Efficient Active All-Dielectric Metasurfaces Based on Hybrid Structures Integrated with Phase-Change Materials: From Terahertz to Optical Ranges

Recently, all-dielectric metasurfaces (AMs) have emerged as a promising platform for high-efficiency devices ranging from the terahertz to optical ranges. However, active and fast tuning of their properties, such as amplitude, phase, and operating frequency, remains challenging. Here, a generic method is proposed for obtaining high-efficiency active AMs from the terahertz to optical ranges by using "hybrid structures" integrated with phase-change materials. Various phase-change mechanisms including metal-insulator phase change, nonvolatile phase change, and ferroelectric phase change are investigated. We first experimentally demonstrate several high-efficiency active AMs operating in the terahertz range based on hybrid structures composed of free-standing silicon microstructures covered with ultrathin phase-change nanofilms (thickness d ≪ λ). We show that both the frequencies and the strength of the Mie resonances can be efficiently tuned, resulting in unprecedented modulation depth. Furthermore, detailed analyses of available phase-change materials and their properties are provided to offer more options for active AMs. Finally, several feasible hybrid structures for active AMs in the optical range are proposed and confirmed numerically. The broad platform built in this work for active manipulation of waves from the terahertz to optical ranges may have numerous potential applications in optical devices including switches, modulators, and sensors.

Bright Mid-Infrared Photoluminescence from Thin-Film Black Phosphorus

Recently rediscovered layered black phosphorus (BP) provides rich opportunities for investigations of device physics and applications. The band gap of BP is widely tunable by its layer number and a vertical electric field, covering a wide electromagnetic spectral range from visible to mid-infrared. Despite much progress in BP optoelectronics, the fundamental photoluminescence (PL) properties of thin-film BP in mid-infrared have rarely been investigated. Here, we report bright PL emission from thin-film BP (with thickness of 4.5 to 46 nm) from 80 to 300 K. The PL measurements indicate a band gap of 0.308 ± 0.003 eV in 46 nm thick BP at 80 K, and it increases monotonically to 0.334 ± 0.003 eV at 300 K. Such an anomalous blueshift agrees with the previous theoretical and photoconductivity spectroscopy results. However, the observed blueshift of 26 meV from 80 to 300 K is about 60% of the previously reported value. Most importantly, we show that the PL emission intensity from thin-film BP is only a few times weaker than that of an indium arsenide (InAs) multiple quantum well (MQW) structure grown by molecular beam epitaxy. Finally, we report the thickness-dependent PL spectra in thin-film BP in mid-infrared regime. Our work reveals the mid-infrared light emission properties of thin-film BP, suggesting its promising future in tunable mid-infrared light emitting and lasing applications.

Recent Progress on Graphene-Functionalized Metasurfaces for Tunable Phase and Polarization Control

The combination of graphene and a metasurface holds great promise for dynamic manipulation of the electromagnetic wave from low terahertz to mid-infrared. The optical response of graphene is significantly enhanced by the highly-localized fields in the meta-atoms, and the characteristics of meta-atoms can in turn be modulated in a large dynamic range through electrical doping of graphene. Graphene metasurfaces are initially focused on intensity modulation as modulators and tunable absorbers. In this paper, we review the recent progress of graphene metasurfaces for active control of the phase and the polarization. The related applications involve, but are not limited to lenses with tunable intensity or focal length, dynamic beam scanning, wave plates with tunable frequency, switchable polarizers, and real-time generation of an arbitrary polarization state, all by tuning the gate voltage of graphene. The review is concluded with a discussion of the existing challenges and the personal perspective of future directions.

Black Phosphorus-New Nanostructured Material for Humidity Sensors: Achievements and Limitations

The prospects of using nanostructured black phosphorus for the development of humidity sensors are considered. It was shown that black phosphorus has a set of parameters that distinguish it from other two-dimensional (2D) materials such as graphene, silicone, and dichalcogenides. At the same time, an analysis of shortcomings, limiting the use of black phosphorus as a humidity sensitive material in devices aimed for market of humidity sensors, was also conducted.

Effects of Cavity Structure on Tuning Properties of Polymer Lasers in a Liquid Environment

The effect of cavity structures on the tuning properties of polymer lasers was investigated in two common distributed-feedback cavities. The configurations of the two cavities are substrate/grating/active waveguide and substrate/active waveguide/grating, respectively. The polymer lasers were operated in the liquid environment, and the laser wavelength was tuned dynamically by changing the refractive index of the liquid. Polymer lasers based on the substrate/grating/active waveguide structure showed a higher tunability than those based on the substrate/active waveguide/grating structure due to a larger electric field distribution of the laser mode in the liquid environment. It is expected that these results will be useful in the development of tunable laser sources.

High Performance, Tunable Electrically Small Antennas through Mechanically Guided 3D Assembly

To address demands for increased data transmission rates, electrically small antennas (ESAs) that simultaneously offer large frequency bandwidths and small physical sizes are of growing interest. 3D layouts are particularly important in this context and among various 3D ESAs, systems that adopt hemispherical shapes are very promising, because they can occupy the entire Chu-sphere and offer outstanding electrical performance. Researchers have developed a few different approaches to fabricate high-quality hemispherical ESAs, but most have static layouts and fixed operating frequencies. Here, a mechanically guided 3D assembly approach is introduced for the design and fabrication of deformable hemispherical ESAs that can offer tunable, dynamic properties to adapt to changes in environmental conditions. The strategy exploits controlled compressive buckling of strategically patterned 2D precursor structures, as a low-cost and high-yield scheme that can exploit conventional, planar processing technologies and commercially available platforms. Combined numerical simulations and experimental measurements show outstanding performance characteristics in terms of the quality factor and radiation efficiency. Application of external tensile strains to elastomeric substrates for these systems allows them to be reshaped and reversibly tuned through a wide range of center frequencies. Mechanical testing under different loading conditions demonstrates the ability of these ESAs to accommodate large deformations.

Multilayer ReS2 Photodetectors with Gate Tunability for High Responsivity and High-Speed Applications

Rhenium disulfide (ReS₂) is an attractive candidate for photodetection applications owing to its thickness-independent direct band gap. Despite various photodetection studies using two-dimensional semiconductors, the trade-off between responsivity and response time under varying measurement conditions has not been studied in detail. This report presents a comprehensive study of the architectural, laser power and gate bias dependence of responsivity and speed in supported and suspended ReS₂ phototransistors. Photocurrent scans show uniform photogeneration across the entire channel because of enhanced optical absorption and a direct band gap in multilayer ReS₂. A high responsivity of 4 A W^-1 (at 50 ms response time) and a low response time of 20 μs (at 4 mA W^-1 responsivity) make this one of the fastest reported transition-metal dichalcogenide photodetectors. Occupancy of intrinsic (bulk ReS₂) and extrinsic (ReS₂/SiO₂ interface) traps is modulated using gate bias to demonstrate tunability of the response time (responsivity) over 4 orders (15×) of magnitude, highlighting the versatility of these photodetectors. Differences in the trap distributions of suspended and supported channel architectures, and their occupancy under different gate biases enable switching the dominant operating mechanism between either photogating or photoconduction. Further, a new metric that captures intrinsic photodetector performance by including the trade-off between its responsivity and speed, besides normalizing for the applied bias and geometry, is proposed and benchmarked for this work.

Tunable Acoustic Metasurface with High-Q Spectrum Splitting

We propose a tunable acoustic metasurface using a nested structure as the microunit, which is constituted by two distinct resonators. Thanks to the coupling resonance for the microunit and by simply adjusting the rotation angle of the inner split cavity, this nested structure provides nearly 2π phase shift. The full-wave simulations demonstrate that the constructed metasurface can be tuned to reflect incident sound waves to different directions in the operation frequency region with a very narrow bandwidth, which is a key functionality for many applications such as filtering and imaging. Meanwhile, the reflected sound waves out of the operation frequency region always remain unchanged. As a result, a high Q-factor spectrum splitting can be realised. The presented metasurface is of importance to develop many metamaterial-based devices, such as tunable acoustic cloaks and acoustic switching devices.

Electrical and Optical Tunability in All-Inorganic Halide Perovskite Alloy Nanowires

Alloying different semiconductors is a powerful approach to tuning the optical and electronic properties of semiconductor materials. In halide perovskites (ABX₃), alloys with different anions have been widely studied, and great band gap tunability in the visible range has been achieved. However, perovskite alloys with different cations at the "B" site are less understood due to the synthetic challenges. Herein, we first have developed the synthesis of single-crystalline CsPb _xSn_{1- x}I₃ nanowires (NWs). The electronic band gaps of CsPb _xSn_{1- x}I₃ NWs can be tuned from 1.3 to 1.78 eV by varying the Pb/Sn ratio, which leads to the tunable photoluminescence (PL) in the near-infrared range. More importantly, we found that the electrical conductivity increases as more Sn²⁺ is alloyed with Pb²⁺, possibly due to the increase of charge carrier concentration when more Sn²⁺ is introduced. The wide tunability of the optical and electronic properties makes CsPb _xSn_{1- x}I₃ alloy NWs promising candidates for future optoelectronic device applications.

Surface-Anchored Metal-Organic Framework-Cotton Material for Tunable Antibacterial Copper Delivery

In the present study, a new copper metal-organic framework (MOF)-cotton material was strategically fabricated to exploit its antibacterial properties for postsynthetic modification (PSM) to introduce a free amine to tune the physicochemical properties of the material. A modified methodology for carboxymethylation of natural cotton was utilized to enhance the number of nucleation sites for the MOF growth. Subsequently, MOF Cu3(NH2BTC)2 was synthesized into a homogenous surface-supported film via a layer-by-layer dip-coating process. The resultant materials contained uniformly distributed 1 μm × 1 μm octahedral MOF crystals around each carboxymethylated fiber. Importantly, the accessible free amine of the MOF ligand allowed for the PSM of the MOF-cotton surface with valeric anhydride, yielding 23.5 ± 2.2% modified. The Cu2+ ion-releasing performance of the materials was probed under biological conditions per submersion in complex media at 37 °C. Indeed, PSM induces a change in the copper flux of the material over the first 6 h. The materials continue to slowly release Cu2+ ions beyond 24 h tested at a flux of 0.22 ± 0.003 μmol·cm-2·h-1 with the unmodified MOF-cotton and at 0.25 ± 0.004 μmol·cm-2·h-1 with the modified MOF-cotton. The antibacterial activity of the material was explored using Escherichia coli by testing the planktonic and attached bacteria under a variety of conditions. MOF-cotton materials elicit antibacterial effects, yielding a 4-log reduction or greater, after 24 h of exposure. Additionally, the MOF-cotton materials inhibit the attachment of bacteria, under both dry and wet conditions. A material of this type would be ideal for clothing, bandages, and other textile applications. As such, this work serves as a precedence toward developing uniform, tunable MOF-composite textile materials that can kill bacteria and prevent the attachment of bacteria to the surface.

A robust and tunable mitotic oscillator in artificial cells

Single-cell analysis is pivotal to deciphering complex phenomena like heterogeneity, bistability, and asynchronous oscillations, where a population ensemble cannot represent individual behaviors. Bulk cell-free systems, despite having unique advantages of manipulation and characterization of biochemical networks, lack the essential single-cell information to understand a class of out-of-steady-state dynamics including cell cycles. Here, by encapsulating Xenopus egg extracts in water-in-oil microemulsions, we developed artificial cells that are adjustable in sizes and periods, sustain mitotic oscillations for over 30 cycles, and function in forms from the simplest cytoplasmic-only to the more complicated ones involving nuclear dynamics, mimicking real cells. Such innate flexibility and robustness make it key to studying clock properties like tunability and stochasticity. Our results also highlight energy as an important regulator of cell cycles. We demonstrate a simple, powerful, and likely generalizable strategy of integrating strengths of single-cell approaches into conventional in vitro systems to study complex clock functions.