1
|
In Vitro Investigation of Vocal Fold Cellular Response to Variations in Hydrogel Porosity and Elasticity. ACS Biomater Sci Eng 2024. [PMID: 38783819 DOI: 10.1021/acsbiomaterials.4c00197] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/25/2024]
Abstract
Tissue regeneration is intricately influenced by the dynamic interplay between the physical attributes of tissue engineering scaffolds and the resulting biological responses. A tunable microporous hydrogel system was engineered using gelatin methacryloyl (GelMA) and polyethylene glycol diacrylate (PEGDA), with polyethylene glycol (PEG) serving as a porogen. Through systematic variation of PEGDA molecular weights, hydrogels with varying mechanical and architectural properties were obtained. The objective of the present study was to elucidate the impact of substrate mechanics and architecture on the immunological and reparative activities of vocal fold tissues. Mechanical characterization of the hydrogels was performed using tensile strength measurements and rheometry. Their morphological properties were investigated using scanning electron microscopy (SEM) and confocal microscopy. A series of biological assays were conducted. Cellular morphology, differentiation, and collagen synthesis of human vocal fold fibroblasts (hVFFs) were evaluated using immunostaining. Fibroblast proliferation was studied using the WST-1 assay, and cell migration was investigated via the Boyden chamber assay. Macrophage polarization and secretions were also examined using immunostaining and ELISA. The results revealed that increasing the molecular weight of PEGDA from 700 Da to 10,000 Da resulted in decreased hydrogel stiffness, from 62.6 to 8.8 kPa, and increased pore dimensions from approximately 64.9 to 137.4 μm. Biological evaluations revealed that hydrogels with a higher stiffness promoted fibroblast proliferation and spreading, albeit with an increased propensity for fibrosis, as indicated by a surge in myofibroblast differentiation and collagen synthesis. In contrast, hydrogels with greater molecular weights had a softer matrix with expanded pores, enhancing cellular migration and promoting an M2 macrophage phenotype conducive to tissue healing. The findings show that the hydrogels formulated with a PEGDA molecular weight of 6000 Da are best among the hydrogels considered for vocal fold repair. The microporous hydrogels could be tuned to serve in other tissue engineering applications.
Collapse
|
2
|
In Situ Laser-Induced 3D Porous Graphene within Transparent Polymers for Encapsulation-Free and Tunable Ultrabroadband Terahertz Absorption. ACS APPLIED MATERIALS & INTERFACES 2024; 16:26557-26567. [PMID: 38736285 DOI: 10.1021/acsami.4c03055] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/14/2024]
Abstract
Three-dimensional (3D) porous carbon materials have great potential for fabricating flexible tunable broadband absorbers owing to their high electrical conductivity, strong dielectric loss, and unique microstructure. Herein, we introduce an innovative method for synthesizing 3D porous graphene that incorporates advanced tuning and encapsulation processes to augment its functional efficacy. Through the modulation of both thermal and nonthermal interactions between a femtosecond (fs) laser and a polydimethylsiloxane (PDMS) film, we have synergistically fine-tuned the surface morphology and lattice properties of 3D porous graphene. This approach enabled us to create a flexible terahertz (THz) absorber with customizable characteristics, boasting an impressive absorbance range of 80%-99% in the 0.4-1.0 THz spectrum, alongside a peak reflection loss (RL) of up to 35.6 dB. Furthermore, we have successfully demonstrated the production of photoinduced 3D porous graphene within a PDMS film, which serves as both a carbon precursor and protective layer. This simplifies the conventional packaging process. These devices exhibit a RL of up to 41.6 dB and an absorption bandwidth of 2.5 THz (0.6-3.1 THz). Our study presents a production methodology for high-performance, flexible THz absorbers, offering a straightforward and innovative solution for the rapid development of sophisticated, flexible THz absorbing materials.
Collapse
|
3
|
Nanoimprinting Solution-Derived Barium Titanate for Electro-Optic Metasurfaces. NANO LETTERS 2024; 24:5536-5542. [PMID: 38657957 PMCID: PMC11082927 DOI: 10.1021/acs.nanolett.4c00711] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2024] [Revised: 04/03/2024] [Accepted: 04/03/2024] [Indexed: 04/26/2024]
Abstract
Electro-optic metasurfaces have demonstrated significant potential in enhancing the modulation speed and efficiency for fast and large-scale free-space optical devices. Barium titanate has a strong electro-optic Pockels coefficient, but its availability in thin-film form is restricted due to costly growth processes or low thickness. Here, we fabricated active metasurfaces using an etch-free bottom-up process with sol-gel-based polycrystalline barium titanate with a large electro-optic coefficient similar to bulk lithium niobate. We achieve strong hybrid Mie/surface lattice resonances with a quality-factor of 200 at 633 nm wavelength, enhancing the light-matter interaction and therefore the Pockels effect. The metasurface transmission is electro-optically modulated with up to 5 MHz driving frequency at low voltages of less than 1 V thanks to resonant enhancement of the modulation amplitude by 2 orders of magnitude. This successful demonstration of electro-optic modulation in nanoimprinted barium titanate structures paves the way for low-cost and large-scale free-space modulators or tunable metalenses.
Collapse
|
4
|
Graphene-Based Tunable Dual-Frequency Terahertz Sensor. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:378. [PMID: 38392752 PMCID: PMC10892907 DOI: 10.3390/nano14040378] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/08/2024] [Revised: 02/06/2024] [Accepted: 02/14/2024] [Indexed: 02/24/2024]
Abstract
A tunable dual-band terahertz sensor based on graphene is proposed. The sensor consists of a metal bottom layer, a middle dielectric layer, and single-layer graphene patterned with four strips on the top. The numerical simulations results show that the proposed sensor exhibits two significant absorption peaks at 2.58 THz and 6.07 THz. The corresponding absorption rates are as high as nearly 100% and 98%, respectively. The corresponding quality factor (Q) value is 11.8 at 2.58 THz and 29.6 at 6.07 THz. By adjusting the external electric field or chemical doping of graphene, the positions of the dual-frequency resonance peak can be dynamically tuned. The excitation of plasma resonance in graphene can illustrate the mechanism of the sensor. To verify the practical application of the device, the terahertz response of different kinds and different thicknesses of the analyte is investigated and analyzed. A phenomenon of obvious frequency shifts of the two resonance peaks can be observed. Therefore, the proposed sensor has great potential applications in terahertz fields, such as material characterization, medical diagnosis, and environmental monitoring.
Collapse
|
5
|
A Tunable Glycosaminoglycan-Peptide Nanoparticle Platform for the Protection of Therapeutic Peptides. Pharmaceutics 2024; 16:173. [PMID: 38399234 PMCID: PMC10892384 DOI: 10.3390/pharmaceutics16020173] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2023] [Revised: 01/22/2024] [Accepted: 01/24/2024] [Indexed: 02/25/2024] Open
Abstract
The popularity of Glycosaminoglycans (GAGs) in drug delivery systems has grown as their innate ability to sequester and release charged molecules makes them adept in the controlled release of therapeutics. However, peptide therapeutics have been relegated to synthetic, polymeric systems, despite their high specificity and efficacy as therapeutics because they are rapidly degraded in vivo when not encapsulated. We present a GAG-based nanoparticle system for the easy encapsulation of cationic peptides, which offers control over particle diameter, peptide release behavior, and swelling behavior, as well as protection from proteolytic degradation, using a singular, organic polymer and no covalent linkages. These nanoparticles can encapsulate cargo with a particle diameter range spanning 130-220 nm and can be tuned to release cargo over a pH range of 4.5 to neutral through the modulation of the degree of sulfation and the molecular weight of the GAG. This particle system also confers better in vitro performance than the unencapsulated peptide via protection from enzymatic degradation. This method provides a facile way to protect therapeutic peptides via the inclusion of the presented binding sequence and can likely be expanded to larger, more diverse cargo as well, abrogating the complexity of previously demonstrated systems while offering broader tunability.
Collapse
|
6
|
Self-Powered Programmable van der Waals Photodetectors with Nonvolatile Semifloating Gate. NANO LETTERS 2023; 23:11645-11654. [PMID: 38088857 DOI: 10.1021/acs.nanolett.3c03500] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/28/2023]
Abstract
Tunable photovoltaic photodetectors are of significant relevance in the fields of programmable and neuromorphic optoelectronics. However, their widespread adoption is hindered by intricate architectural design and energy consumption challenges. This study employs a nonvolatile MoTe2/hexagonal boron nitride/graphene semifloating photodetector to address these issues. Programed with pulsed gate voltage, the MoTe2 channel can be reconfigured from an n+-n to a p-n homojunction and the photocurrent transition changes from negative to positive values. Scanning photocurrent mapping reveals that the negative and positive photocurrents are attributed to Schottky junction and p-n homojunction, respectively. In the p-n configuration, the device demonstrates self-driven, linear, rapid response (∼3 ms), and broadband sensitivity (from 405 to 1500 nm) for photodetection, with typical performances of responsivity at ∼0.5 A/W and detectivity ∼1.6 × 1012 Jones under 635 nm illumination. These outstanding photodetection capabilities emphasize the potential of the semifloating photodetector as a pioneering approach for advancing logical and nonvolatile optoelectronics.
Collapse
|
7
|
Tunable Optical Display of Multilayer Graphene through Lithium Intercalation. ACS APPLIED MATERIALS & INTERFACES 2023; 15:53688-53696. [PMID: 37956364 DOI: 10.1021/acsami.3c11079] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/15/2023]
Abstract
The tunable optical display is vital for many application fields in telecommunications, sensors, and military devices. However, most optical materials have a strong wavelength dependence, which limits their spectral operation range. In this work, we develop an electrically reconfigurable optical medium based on graphene, demonstrating a cycle-controlled display covering the electromagnetic spectrum from the visible to the infrared wavelength. Through an electro-intercalation method, the graphene-based surface enables rich colors from gray to dark blue to dark red to yellow, and the response time is about 1 min from the start gray color to the final yellow color. Simultaneously, it exhibits a remarkable change in infrared emissivity (from 0.63 to 0.80 reduction to 0.20) with a response time of 1 s. This modification of optical properties of lithiated multilayer graphene (MLG) is the increase of Fermi energy (Ef) due to the charge transfer from lithium (Li) to graphene layers, which causes changes in interband and intraband electronic transitions. Our findings imply potential value in fabricating multispectral optical materials with high tunability.
Collapse
|
8
|
Broadband Achromatic Metalens for Tunable Focused Vortex Beam Generation in the Near-Infrared Range. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2765. [PMID: 37887916 PMCID: PMC10609118 DOI: 10.3390/nano13202765] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/11/2023] [Revised: 10/08/2023] [Accepted: 10/13/2023] [Indexed: 10/28/2023]
Abstract
Vortex beams accompanied with orbital angular momentum have attracted significant attention in research fields due to their formidable capabilities in various crucial applications. However, conventional devices for generating vortex beams still suffer from bulky sizes, high cost, and confined performances. Metalens, as an advanced platform to arbitrarily control the optical waves, has promising prospects to address the predicament for conventional devices. Although great progress has been demonstrated in the applications of vortex beams, they are still confronted with fixed functionality after fabrication that severely hinders their application range. In this work, the phase-change material of Ge2Sb2Te5 (GST) is employed to design the meta-atoms to realize tunable optical responses. Moreover, the focused vortex beam can be accomplished by superimposing a helical phase and hyperbolic phase, and the chromatic aberrations in near-infrared (NIR) range can be corrected by introducing an additional phase compensation. And the design strategy is validated by two different metalenses (BAMTF-1 and BAMTF-2). The numerical results indicate that the chromatic aberrations for two metalens can be corrected in 1.33-1.60 μm covering the telecom range. Moreover, the average focusing efficiency of BAMTF-1 is 51.4%, and that of BAMTF-2 is 39.9%, indicating the favorable performances of designed BAMTF. More importantly, their average focal lengths have a relative tuning range of 38.82% and 33.17% by altering the crystallization ratio of GST, respectively. This work may provide a significant scheme for on-chip and tunable devices for NIR imaging and communication systems.
Collapse
|
9
|
Tunable Broadband Terahertz Metamaterial Absorber Based on Vanadium Dioxide and Graphene. MICROMACHINES 2023; 14:1715. [PMID: 37763877 PMCID: PMC10537236 DOI: 10.3390/mi14091715] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 08/22/2023] [Accepted: 08/25/2023] [Indexed: 09/29/2023]
Abstract
We propose a dynamically tunable ultra-broadband terahertz metamaterial absorber, which was based on graphene and vanadium oxide (VO2) and numerically demonstrated. The excellent absorption bandwidth almost entirely greater than 90% was as wide as 6.35 THz from 2.30 to 8.65 THz under normal incidence. By changing the conductivity of VO2 from 20 S/m to 3 × 105 S/m, the absorption intensity could be dynamically tuned from 6% to 99%. The physical mechanism of the ultra-wideband absorption is discussed based on the interference cancelation, impedance matching theory, and field distributions, and the influences of the structural parameters on absorption are also discussed. According to the symmetric configuration, the absorption spectra of the considered polarizations were very close to each other, resulting in a polarization-insensitive structure. Such a tunable ultra-broadband absorber may have promising potential in the applications of modulating, cloaking, switching, and imaging technology.
Collapse
|
10
|
A Tunable Frequency Selective Rasorber with Broad Passband and Low Transmission Loss at X-Band. MATERIALS (BASEL, SWITZERLAND) 2023; 16:5787. [PMID: 37687479 PMCID: PMC10488774 DOI: 10.3390/ma16175787] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2023] [Revised: 07/29/2023] [Accepted: 08/05/2023] [Indexed: 09/10/2023]
Abstract
In this paper, we propose a dual-mode frequency selective rasorber (FSR) with tunable transmission and absorption windows at the X-band, which shows a broad passband in each transmission window. The proposed tunable FSR consists of a lossy absorption layer, a lossless transmission layer, and an air gap between them. The top frequency selective surface (FSS) layer is a cross-shaped meandering line with resistors and varactors for tunable absorption, and the bottom layer is a cross-shaped gap with varactors to achieve tunable bandpass. The equivalent circuit model (ECM) is investigated, and the 3D full wave simulation is performed. The results are based on simulations, and the simulation results show that the passband can be tuned from 12 to 8 GHz with an insertion loss between 0.5 and 1.4 dB by sweeping the capacitance of the varactors. The proposed design decreases the chances of detection by adversary devices and assures spectrum-safe communication, thereby creating new avenues for radar stealth and target concealment.
Collapse
|
11
|
Abstract
The imaging of microscopic biological samples faces numerous difficulties due to their small feature sizes and low-amplitude contrast. Metalenses have shown great promise in bioimaging as they have access to the complete complex information, which, alongside their extremely small and compact footprint and potential to integrate multiple functionalities into a single device, allow for miniaturized microscopy with exceptional features. Here, we design and experimentally realize a dual-mode metalens integrated with a liquid crystal cell that can be electrically switched between bright-field and edge-enhanced imaging on the millisecond scale. We combine the concepts of geometric and propagation phase to design the dual-mode metalens and physically encode the required phase profiles using hydrogenated amorphous silicon for operation at visible wavelengths. The two distinct metalens phase profiles include (1) a conventional hyperbolic metalens for bright-field imaging and (2) a spiral metalens with a topological charge of +1 for edge-enhanced imaging. We demonstrate the focusing and vortex generation ability of the metalens under different states of circular polarization and prove its use for biological imaging. This work proves a method for in vivo observation and monitoring of the cell response and drug screening within a compact form factor.
Collapse
|
12
|
Switchable and Tunable Terahertz Metamaterial Based on Vanadium Dioxide and Photosensitive Silicon. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2144. [PMID: 37513155 PMCID: PMC10385666 DOI: 10.3390/nano13142144] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2023] [Revised: 07/19/2023] [Accepted: 07/20/2023] [Indexed: 07/30/2023]
Abstract
A switchable and tunable terahertz (THz) metamaterial based on photosensitive silicon and Vanadium dioxide (VO2) was proposed. By using a finite-difference time-domain (FDTD) method, the transmission and reflective properties of the metamaterial were investigated theoretically. The results imply that the metamaterial can realize a dual electromagnetically induced transparency (EIT) or two narrow-band absorptions depending on the temperature of the VO2. Additionally, the magnitude of the EIT and two narrow-band absorptions can be tuned by varying the conductivity of photosensitive silicon (PSi) via pumping light. Correspondingly, the slow-light effect accompanying the EIT can also be adjusted.
Collapse
|
13
|
Room-Temperature and Tunable Tunneling Magnetoresistance in Fe 3GaTe 2-Based 2D van der Waals Heterojunctions. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37466234 DOI: 10.1021/acsami.3c06167] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/20/2023]
Abstract
Magnetic tunnel junctions (MTJs) based on van der Waals (vdW) heterostructures with sharp and clean interfaces on the atomic scale are essential for the application of next-generation spintronics. However, the lack of room-temperature intrinsic ferromagnetic crystals with perpendicular magnetic anisotropy has greatly hindered the development of vertical MTJs. The discovery of room-temperature intrinsic ferromagnetic two-dimensional (2D) crystal Fe3GaTe2 has solved the problem and greatly facilitated the realization of practical spintronic devices. Here, we demonstrate a room-temperature MTJ based on a Fe3GaTe2/WS2/Fe3GaTe2 heterostructure for the first time. The tunneling magnetoresistance (TMR) ratio is up to 213% with a high spin polarization of 72% at 10 K, the highest ever reported in Fe3GaTe2-based MTJs up to now. A tunneling spin-valve signal robustly persists at room temperature (300 K) with a bias current down to 10 nA. Moreover, the spin polarization can be modulated by bias current and the TMR shows a sign reversal at a large bias current. Our work sheds light on the potential application of low-energy consumption in all-2D vdW spintronics and offers alternative routes for the electronic control of spintronic devices.
Collapse
|
14
|
Triple-Band Surface Plasmon Resonance Metamaterial Absorber Based on Open-Ended Prohibited Sign Type Monolayer Graphene. MICROMACHINES 2023; 14:mi14050953. [PMID: 37241576 DOI: 10.3390/mi14050953] [Citation(s) in RCA: 32] [Impact Index Per Article: 32.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2023] [Revised: 04/18/2023] [Accepted: 04/25/2023] [Indexed: 05/28/2023]
Abstract
This paper introduces a novel metamaterial absorber based on surface plasmon resonance (SPR). The absorber is capable of triple-mode perfect absorption, polarization independence, incident angle insensitivity, tunability, high sensitivity, and a high figure of merit (FOM). The structure of the absorber consists of a sandwiched stack: a top layer of single-layer graphene array with an open-ended prohibited sign type (OPST) pattern, a middle layer of thicker SiO2, and a bottom layer of the gold metal mirror (Au). The simulation of COMSOL software suggests it achieves perfect absorption at frequencies of fI = 4.04 THz, fII = 6.76 THz, and fIII = 9.40 THz, with absorption peaks of 99.404%, 99.353%, and 99.146%, respectively. These three resonant frequencies and corresponding absorption rates can be regulated by controlling the patterned graphene's geometric parameters or just adjusting the Fermi level (EF). Additionally, when the incident angle changes between 0~50°, the absorption peaks still reach 99% regardless of the kind of polarization. Finally, to test its refractive index sensing performance, this paper calculates the results of the structure under different environments which demonstrate maximum sensitivities in three modes: SI = 0.875 THz/RIU, SII = 1.250 THz/RIU, and SIII = 2.000 THz/RIU. The FOM can reach FOMI = 3.74 RIU-1, FOMII = 6.08 RIU-1, and FOMIII = 9.58 RIU-1. In conclusion, we provide a new approach for designing a tunable multi-band SPR metamaterial absorber with potential applications in photodetectors, active optoelectronic devices, and chemical sensors.
Collapse
|
15
|
A Magnetic Levitation System for Range/Sensitivity- Tunable Measurement of Density. SENSORS (BASEL, SWITZERLAND) 2023; 23:3955. [PMID: 37112295 PMCID: PMC10143956 DOI: 10.3390/s23083955] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Revised: 04/11/2023] [Accepted: 04/12/2023] [Indexed: 06/19/2023]
Abstract
Magnetic levitation (MagLev) is a promising density-based analytical technique with numerous applications. Several MagLev structures with different levels of sensitivity and range have been studied. However, these MagLev structures can seldom satisfy the different performance requirements simultaneously, such as high sensitivity, wide measurement range, and easy operation, which have prevented them from being widely used. In this work, a tunable MagLev system was developed. It is confirmed by numerical simulation and experiments that this system possesses a high resolution down to 10-7 g/cm3 or even higher compared to the existing systems. Meanwhile, the resolution and range of this tunable system can be adjusted to meet different requirements of measurement. More importantly, this system can be operated simply and conveniently. This bundle of characteristics demonstrates that the novel tunable MagLev system could be handily applied in various density-based analyses on demand, which would greatly expand the ability of MagLev technology.
Collapse
|
16
|
Competing interface and bulk anisotropies in Co-rich TbCo amorphous thin films. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2023; 35:205802. [PMID: 36881918 DOI: 10.1088/1361-648x/acc226] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/24/2022] [Accepted: 03/07/2023] [Indexed: 06/18/2023]
Abstract
We study the magnetic properties of amorphous TbxCo100-xfilms withxin the range 8-12 at% and with a thickness of 5-100 nm. In this range the magnetic properties are shaped by a competition between a perpendicular bulk magnetic anisotropy and an in-plane interface anisotropy, in addition to the changes in magnetization. This results in a temperature controllable spin reorientation transition from in-plane to out-of-plane which is thickness and composition dependent. Furthermore, we show that perpendicular anisotropy is recovered throughout an entire TbCo/CoAlZr multilayer, where neither TbCo nor CoAlZr single layers exhibit perpendicular anisotropy. This illustrates the important role of the TbCo interfaces in the overall effective anisotropy.
Collapse
|
17
|
A High-Temperature Superconducting Bandpass Dual-Mode Filter with Tunable Relative Bandwidth and Center Frequency. SENSORS (BASEL, SWITZERLAND) 2023; 23:1079. [PMID: 36772120 PMCID: PMC9920763 DOI: 10.3390/s23031079] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/13/2022] [Revised: 01/04/2023] [Accepted: 01/13/2023] [Indexed: 06/18/2023]
Abstract
This study proposes a high-temperature superconducting (HTS) bandpass filter with a continuously tunable bandwidth and center frequency. The proposed filter combines several gallium arsenide varactors and a dual-mode resonator (DMR). The even and odd modes of the DMR can be tuned simultaneously using a single bias voltage. The capacitive value of varactors in the circuit is tuned continuously under continuous voltage and frequency tunability. External couplings and the interstage can be realized using an interdigital coupling structure; a fixed capacitor is added to the feeder to improve its coupling strength. A low-insertion loss within the band is obtained using HTS technology. Additionally, the proposed filter is etched on a 0.5 mm-thick MgO substrate and combined with YBCO thin films for demonstration. For the as-fabricated device, the tuning frequency range of 1.22~1.34 GHz was 9.4%; the 3-dB fractional bandwidth was 12.95~17.39%, and the insertion loss was 2.28~3.59 dB. The simulation and experimental measurement results were highly consistent.
Collapse
|
18
|
Three-Dimensional Bioprinting with Alginate by Freeform Reversible Embedding of Suspended Hydrogels with Tunable Physical Properties and Cell Proliferation. BIOENGINEERING (BASEL, SWITZERLAND) 2022; 9:bioengineering9120807. [PMID: 36551013 PMCID: PMC9774270 DOI: 10.3390/bioengineering9120807] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 12/12/2022] [Accepted: 12/12/2022] [Indexed: 12/23/2022]
Abstract
Extrusion-based three-dimensional (3D) bioprinting is an emerging technology that allows for rapid bio-fabrication of scaffolds with live cells. Alginate is a soft biomaterial that has been studied extensively as a bio-ink to support cell growth in 3D constructs. However, native alginate is a bio-inert material that requires modifications to allow for cell adhesion and cell growth. Cells grown in modified alginates with the RGD (arginine-glycine-aspartate) motif, a naturally existing tripeptide sequence that is crucial to cell adhesion and proliferation, demonstrate enhanced cell adhesion, spreading, and differentiation. Recently, the bioprinting technique using freeform reversible embedding of suspended hydrogels (FRESH) has revolutionized 3D bioprinting, enabling the use of soft bio-inks that would otherwise collapse in air. However, the printability of RGD-modified alginates using the FRESH technique has not been evaluated. The associated physical properties and bioactivity of 3D bio-printed alginates after RGD modification remains unclear. In this study, we characterized the physical properties, printability, and cellular proliferation of native and RGD-modified alginate after extrusion-based 3D bioprinting in FRESH. We demonstrated tunable physical properties of native and RGD-modified alginates after FRESH 3D bioprinting. Sodium alginate with RGD modification, especially at a high concentration, was associated with greatly improved cell viability and integrin clustering, which further enhanced cell proliferation.
Collapse
|
19
|
All-Dielectric Tunable Terahertz Metagrating for Diffraction Control. ACS APPLIED MATERIALS & INTERFACES 2022; 14:55174-55182. [PMID: 36414393 DOI: 10.1021/acsami.2c13674] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Recently, tunable metagratings have attracted substantial attention in manipulating the diffraction of electromagnetic waves with considerable flexibility, but they are usually limited to inherent ohmic loss due to the metal layers. The all-dielectric schemes can address this issue, but its design and optimization remain challenging in the terahertz regime, especially in the 6G communication window. In this work, an all-dielectric tunable terahertz metagrating is demonstrated in theoretical and experimental investigations. The metagrating operating in the 6G communication window bends the electromagnetic waves beam into the T-1 diffraction order by optimizing the unit cell. In the experiments, more than 72.46% of the transmitted energy is concentrated in the desired diffraction order for p-polarized light and more than 66.60% for s-polarized light, which agrees well with the theoretical design. The tunability by angular deflection is reported in this all-dielectric metagrating. Then, based on the all-dielectric metagrating arrays, a metalens with numerical aperture of NA = 0.39 at 0.14 THz is demonstrated. The subwavelength scale focal spot is obtained as 2.0 mm × 2.0 mm with the focusing distance of 117.8 mm. Imaging capability of the metalens is performed utilizing the transmission imaging manner. The measured and anticipated results are satisfactorily congruous with one another, which could validate our design. This work paves the way toward designing highly efficient and tunable devices with potential applications in terahertz communications, sensors, and super-resolution imaging.
Collapse
|
20
|
Research Progress of Wide Tunable Bragg Grating External Cavity Semiconductor Lasers. MATERIALS (BASEL, SWITZERLAND) 2022; 15:8256. [PMID: 36431741 PMCID: PMC9699373 DOI: 10.3390/ma15228256] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/12/2022] [Revised: 11/11/2022] [Accepted: 11/17/2022] [Indexed: 06/16/2023]
Abstract
In this paper, we review the progress of wide tunable Bragg grating external cavity semiconductor lasers (BG-ECSLs). We concentrate on BG-ECSLs based on the wide tunable range for multicomponent detection. Wide tunable BG-ECSLs have many important applications, such as wavelength-division multiplexing (WDM) systems, coherent optical communications, gas detection and atom cooling. Wide tunability, narrow linewidth and a high side-mode suppression ratio BG-ECSLs have attracted much attention for their merits. In this paper, three main structures for achieving widely tunable, narrow linewidth, high side-mode suppression ratio BG-ECSLs are reviewed and compared in detail, such as the volume Bragg grating (VBG) structure, fiber Bragg grating (FBG) structure and waveguide Bragg grating (WBG) structure of ECSLs. The advantages and disadvantages of different structures of BG-ECSLs are analyzed. The results show that WBG-ECSLs are a potential way to realize the integration, small size, wide tuning range, stable spectral output and high side-mode suppression ratio laser output. Therefore, the use of WBG as optical feedback elements is still the mainstream direction of BG-ECSLs, and BG-ECSLs offer a further new option for multicomponent detection and multi-atoms cooling.
Collapse
|
21
|
Recent Development of Tunable Optical Devices Based on Liquid. Molecules 2022; 27:molecules27228025. [PMID: 36432123 PMCID: PMC9694320 DOI: 10.3390/molecules27228025] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 11/13/2022] [Accepted: 11/14/2022] [Indexed: 11/22/2022] Open
Abstract
Liquid opens up a new stage of device tunability and gradually replaced solid-state devices and mechanical tuning. It optimizes the control method and improves the dynamic range of many optical devices, exhibiting several attractive features, such as rapid prototyping, miniaturization, easy integration and low power consumption. The advantage makes optical devices widely used in imaging, optical control, telecommunications, autopilot and lab-on-a-chip. Here, we review the tunable liquid devices, including isotropic liquid and anisotropic liquid crystal devices. Due to the unique characteristics of the two types of liquids, the tuning principles and tuning methods are distinguished and demonstrated in detail firstly and then some recent progress in this field, covering the adaptive lens, beam controller, beam filter, bending waveguide, iris, resonator and display devices. Finally, the limitations and future perspectives of the current liquid devices are discussed.
Collapse
|
22
|
Flexible and Polarization Independent Miniaturized Double-Band/Broadband Tunable Metamaterial Terahertz Filter. MATERIALS (BASEL, SWITZERLAND) 2022; 15:8174. [PMID: 36431659 PMCID: PMC9698017 DOI: 10.3390/ma15228174] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/21/2022] [Revised: 09/21/2022] [Accepted: 10/25/2022] [Indexed: 06/16/2023]
Abstract
In this paper, the design of a double-band terahertz metamaterial filter with broadband characteristics using a single conducting layer is presented. The design uses a structured top metallic layer over a polyimide material. The proposed design has achieved broadband band-pass transmission characteristics at the resonances of 0.5 THz and 1.65 THz, respectively. The 3-dB bandwidths for these two resonances are 350 GHz and 700 GHz, respectively, which indicates that dual-band resonance with broadband transmission characteristics was obtained. The design has achieved the same transmission characteristics for two different orthogonal polarizations, which was confirmed using numerical simulation. The design was tested for a different angle of incidences and it was observed that this results in angle-independent transmission behavior. In addition, for obtaining tunable resonant behavior, the top conductor layer was replaced by graphene material and a silicon substrate was added below the polymer layer. By varying the Fermi level of graphene, modulation in amplitude and phase was observed in numerical simulation. The physical mechanism of double-band behavior was further confirmed by surface current distribution. The proposed design is simple to fabricate, compact, i.e., the size is λ0/8, and obtained dual-band/broadband operation.
Collapse
|
23
|
Recent Progress in Reconfigurable and Intelligent Metasurfaces: A Comprehensive Review of Tuning Mechanisms, Hardware Designs, and Applications. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2203747. [PMID: 36117118 PMCID: PMC9685480 DOI: 10.1002/advs.202203747] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Revised: 08/19/2022] [Indexed: 05/25/2023]
Abstract
Intelligent metasurfaces have gained significant importance in recent years due to their ability to dynamically manipulate electromagnetic (EM) waves. Their multifunctional characteristics, realized by incorporating active elements into the metasurface designs, have huge potential in numerous novel devices and exciting applications. In this article, recent progress in the field of intelligent metasurfaces are reviewed, focusing particularly on tuning mechanisms, hardware designs, and applications. Reconfigurable and programmable metasurfaces, classified as space gradient, time modulated, and space-time modulated metasurfaces, are discussed. Then, reconfigurable intelligent surfaces (RISs) that can alter their wireless environments, and are considered as a promising technology for sixth-generation communication networks, are explored. Next, the recent progress made in simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) that can achieve full-space EM wave control are summarized. Finally, the perspective on the challenges and future directions of intelligent metasurfaces are presented.
Collapse
|
24
|
All-Optical Tunability of Metalenses Permeated with Liquid Crystals. ACS NANO 2022; 16:16539-16548. [PMID: 36215293 DOI: 10.1021/acsnano.2c05887] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Metasurfaces have been extensively engineered to produce a wide range of optical phenomena, allowing exceptional control over the propagation of light. However, they are generally designed as single-purpose devices without a modifiable postfabrication optical response, which can be a limitation to real-world applications. In this work, we report a nanostructured planar-fused silica metalens permeated with a nematic liquid crystal (NLC) and gold nanoparticle solution. The physical properties of embedded NLCs can be manipulated with the application of external stimuli, enabling reconfigurable optical metasurfaces. We report the all-optical, dynamic control of the metalens optical response resulting from thermoplasmonic-induced changes of the NLC solution associated with the nematic-isotropic phase transition. A continuous and reversible tuning of the metalens focal length is experimentally demonstrated, with a variation of 80 μm (0.16% of the 5 cm nominal focal length) along the optical axis. This is achieved without direct mechanical or electrical manipulation of the device. The reconfigurable properties are compared with corroborating numerical simulations of the focal length shift and exhibit close correspondence.
Collapse
|
25
|
An Active Electromagnetically Induced Transparency (EIT) Metamaterial Based on Conductive Coupling. MATERIALS (BASEL, SWITZERLAND) 2022; 15:7371. [PMID: 36295435 PMCID: PMC9606948 DOI: 10.3390/ma15207371] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Revised: 10/06/2022] [Accepted: 10/17/2022] [Indexed: 06/16/2023]
Abstract
In this paper, we demonstrate an active metamaterial manifesting electromagnetically induced transparency (EIT) effect in the microwave regime. The metamaterial unit cell consists of a double-cross structure, between which a varactor diode is integrated. The capacitance of the diode is controlled by a reversed electrical bias voltage supplied through two connected strip lines. The diode behaves as a radiative resonant mode and the strip lines as a non-radiative resonant mode. The two modes destructively interference with each other through conductive coupling, which leads to a transmission peak in EIT effect. Through electrical control of the diode capacitance, the transmission peak frequency is shifted from 7.4 GHz to 8.7 GHz, and the peak-to-dip ratio is tuned from 1.02 to 1.66, demonstrating a significant tunability.
Collapse
|
26
|
Integrated Papertronic Techniques: Highly Customizable Resistor, Supercapacitor, and Transistor Circuitry on a Single Sheet of Paper. ACS APPLIED MATERIALS & INTERFACES 2022; 14:45658-45668. [PMID: 36166404 DOI: 10.1021/acsami.2c13503] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Humanity's excessive production of material waste poses a critical environmental threat, and the problem is only escalating, especially in the past few decades with the rapid development of powerful electronic tools and persistent consumer desire to upgrade to the newest available technology. The poor disposability of electronics is especially an issue for the newly arising field of single-use devices and sensors, which are often used to evaluate human health and monitor environmental conditions, and for other novel applications. Though impressive in terms of function and convenience, usage of conventional electronic components in these applications would inflict an immense surge in waste and result in higher costs. This work's primary objective is to develop a cost-effective, eco-friendly, all-paper, device for single-use applications that can be easily and safely disposed of through incineration or biodegradation. All electronic components are paper-based and integrated on paper-based printed circuit boards (PCBs), innovatively providing a realistic and practical solution for green electronic platforms. In particular, a methodology is discussed for simultaneously achieving very tunable resistors (20 Ω to 285 kΩ), supercapacitors (∼3.29 mF), and electrolyte-gated field-effect transistors on and within the thickness of a single sheet of paper. Each electronic component is completely integrated into functionalized paper regions and exhibits favorable electrical activity, adjustability, flexibility, and disposability. A simple amplifier circuit is successfully demonstrated within a small area and within the thickness of a single sheet of paper, displaying component versatility and the capability for their fabrication processes to be performed in parallel for efficient and rapid development.
Collapse
|
27
|
Autogenous and Tunable CNTs for Enhanced Polarization and Conduction Loss Enabling Sea Urchin-Like Co 3ZnC/Co/C Composites with Excellent Microwave Absorption Performance. ACS APPLIED MATERIALS & INTERFACES 2022; 14:41246-41256. [PMID: 36045505 DOI: 10.1021/acsami.2c13064] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
ZIF-67-derived magnetic metal/carbon composites are considered prospective candidates for use as microwave absorption (MA) materials owing to their magnetoelectric synergy. However, the structure of ZIF-67-derived MA materials mainly depends on the morphology and composition of pristine metal-organic frameworks (MOFs), and their microstructures lack a rational design. Herein, a multidimensional sea urchin-like carbon nanotubes (CNTs)-grafted carbon polyhedra-encapsulated Co3ZnC/Co nanoparticle composite was prepared by one-step catalytic pyrolysis of ZIF-67/ZnO using a rational structural design. The autogenous and tunable CNTs obtained with the assistance of zinc evaporation not only overcome the limitation of homogeneous dispersion but also endow the Co3ZnC/Co/C composite with outstanding MA properties owing to the conduction loss provided by CNTs, polarization loss caused by multiple components, and electromagnetic wave trap composed of a special sea urchin-like structure. Consequently, the minimum reflection loss of ZZ0.1-600 reaches -60.3 dB at 1.6 mm, the maximum absorption bandwidth of ZZ0.05-600 is 6.24 GHz (covering nearly the entire Ku band) at 1.9 mm, and the structure has a low weight ratio (30 wt %). Compared with Z-600 and pure ZnO, the MA performance of the sea urchin-like Co3ZnC/Co/C composite obtained by rational structural design has been greatly improved; this strategy offers a new approach for optimizing the MA performance of materials according to their structural design.
Collapse
|
28
|
Dynamically Tunable All-Weather Daytime Cellulose Aerogel Radiative Supercooler for Energy-Saving Building. NANO LETTERS 2022; 22:4106-4114. [PMID: 35510868 DOI: 10.1021/acs.nanolett.2c00844] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
A passive cooling strategy without any electricity input has shown a significant impact on overall energy consumption globally. However, designing tunable daytime radiative cooler to meet requirement of different weather conditions is still a big challenge, especially in hot, humid regions. Here, a novel type of tunable, thermally insulating and compressible cellulose nanocrystal (CNC) aerogel coolers is prepared via chemical cross-linking and unidirectional freeze casting process. Such aerogel coolers can achieve a subambient temperature drop of 9.2 °C under direct sunlight and promisingly reached the reduction of ∼7.4 °C even in hot, moist, and fickle extreme surroundings. The tunable cooling performance can be realized via controlling the compression ratio of shape-malleable aerogel coolers. Furthermore, energy consumption modeling of using such aerogel coolers in buildings in China shows 35.4% reduction of cooling energy. This work can pave the way toward designing high-performance, thermal-regulating materials for energy consumption savings.
Collapse
|
29
|
Design of Experiment Approach to Modeling the Effects of Formulation and Drug Loading on the Structure and Properties of Therapeutic Nanogels. Mol Pharm 2022; 19:602-615. [PMID: 35061948 PMCID: PMC9097514 DOI: 10.1021/acs.molpharmaceut.1c00699] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Abstract
The physical properties of nanoparticles may affect the uptake mechanism, biodistribution, stability, and other physicochemical properties of drug delivery systems. This study aimed to first develop a model exploring the factors controlling the nanogel physical properties using a single drug (propranolol), followed by an evaluation of whether these models can be applied more generally to a range of drugs. Size, polydispersity, ζ potential, and encapsulation efficiency were investigated using a design of experiment (DOE) approach to optimize formulations by systematically identifying the effects of, and interactions between, parameters associated with nanogel formulation and drug loading. Three formulation factors were selected, namely, chitosan concentration, the ratio between the chitosan and cross-linker─sodium triphosphate─and the ratio between the chitosan and drug. The results indicate that the DOE approach can be used not only to model but also to predict the size and polydispersity index (PDI). To explore the application of these prediction models with other drugs and to identify the relationship between the drug structure and nanogel properties, nanogels loaded with 12 structurally distinct drugs and 6 structurally similar drugs were fabricated at the optimal condition for propranolol in the model. The measured size, PDI, and ζ potential of the nanogels could not be modeled using distinct DOE parameters for dissimilar drugs, indicating that each drug requires a separate analysis. Nevertheless, for drugs with structural similarities, various linear and nonlinear trends were observed in the size, PDI, and ζ potential of nanogels against selected molecular descriptors, indicating that there are indeed relationships between the drug molecular structure and the performance outcomes, which may be modeled and predicted using the DOE approach. In conclusion, the study demonstrates that DOE models can be applied to model and predict the influence of formulation and drug loading on key performance parameters. While distinct models are required for structurally unrelated drugs, it was possible to establish correlations for the drug series investigated, which were based on polarity, hydrophobicity, and polarizability, thereby elucidating the importance of the interactions between the drug and the nanogels based on the nanogel properties and thus deepening the understanding of the drug-loading mechanisms in nanogels.
Collapse
|
30
|
Piezoelectric MEMS Acoustic Transducer with Electrically- Tunable Resonant Frequency. MICROMACHINES 2022; 13:mi13010096. [PMID: 35056264 PMCID: PMC8779133 DOI: 10.3390/mi13010096] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/20/2021] [Revised: 01/03/2022] [Accepted: 01/06/2022] [Indexed: 02/01/2023]
Abstract
The paper presents a technique to obtain an electrically-tunable matching between the series and parallel resonant frequencies of a piezoelectric MEMS acoustic transducer to increase the effectiveness of acoustic emission/detection in voltage-mode driving and sensing. The piezoelectric MEMS transducer has been fabricated using the PiezoMUMPs technology, and it operates in a plate flexural mode exploiting a 6 mm × 6 mm doped silicon diaphragm with an aluminum nitride (AlN) piezoelectric layer deposited on top. The piezoelectric layer can be actuated by means of electrodes placed at the edges of the diaphragm above the AlN film. By applying an adjustable bias voltage Vb between two properly-connected electrodes and the doped silicon, the d31 mode in the AlN film has been exploited to electrically induce a planar static compressive or tensile stress in the diaphragm, depending on the sign of Vb, thus shifting its resonant frequency. The working principle has been first validated through an eigenfrequency analysis with an electrically induced prestress by means of 3D finite element modelling in COMSOL Multiphysics®. The first flexural mode of the unstressed diaphragm results at around 5.1 kHz. Then, the piezoelectric MEMS transducer has been experimentally tested in both receiver and transmitter modes. Experimental results have shown that the resonance can be electrically tuned in the range Vb = ±8 V with estimated tuning sensitivities of 8.7 ± 0.5 Hz/V and 7.8 ± 0.9 Hz/V in transmitter and receiver modes, respectively. A matching of the series and parallel resonant frequencies has been experimentally demonstrated in voltage-mode driving and sensing by applying Vb = 0 in transmission and Vb = −1.9 V in receiving, respectively, thereby obtaining the optimal acoustic emission and detection effectiveness at the same operating frequency.
Collapse
|
31
|
Novel Photonic Bio-Chip Sensor Based on Strained Graphene Sheets for Blood Cell Sorting. Molecules 2021; 26:molecules26185585. [PMID: 34577055 PMCID: PMC8467184 DOI: 10.3390/molecules26185585] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2021] [Revised: 09/03/2021] [Accepted: 09/10/2021] [Indexed: 11/17/2022] Open
Abstract
A photonic biochip with a tunable response in the visible range is suggested for blood cell sorting applications. Multi-layers of ZnS and Ge slabs (as the main building blocks), hosting a cell in which bio-sample could be injected, are considered as the core of the sensor. In order to increase the sensitivity of the chip, the bio-cell is capsulated inside air slabs, and its walls are coated with graphene sheets. Paying special attention to white and red blood components, the optimum values for structural parameters are extracted first. Tunability of the sensor detectivity is then explored by finding the role of the probe light incident angle, as well as its polarization. The strain of the graphene layer and angle in which it is applied are also suggested to further improve the performance tunability. Results reflect that the biochip can effectively identify selected components through their induced different optical features, besides of the different figure of merit and sensitivity amounts that are recorded for them by the sensor.
Collapse
|
32
|
Tunable Optical Diffusers Based on the UV/Ozone-Assisted Self-Wrinkling of Thermal-Cured Polymer Films. SENSORS 2021; 21:s21175820. [PMID: 34502713 PMCID: PMC8434521 DOI: 10.3390/s21175820] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/13/2021] [Revised: 08/18/2021] [Accepted: 08/26/2021] [Indexed: 12/02/2022]
Abstract
Tunable optical diffusers have attracted attention because of the rapid development of next generation stretchable optoelectronics and optomechanics applications. Flexible wrinkle structures have the potential to change the light path and tune the diffusion capability, which is beneficial to fabricate optical diffusers. The generation of wrinkles usually depends on an external stimulus, thus resulting in complicated fabricating equipment and processes. In this study, a facile and low-cost method is proposed to fabricate wrinkle structures by the self-wrinkling of thermal-cured polymer for tunable optical diffusers. The uncured polydimethylsiloxane (PDMS) precursors were exposed to UV/ozone to obtain hard silica layers and then crosslinked via heating to induce the wrinkle patterns. The wrinkle structures were demonstrated as strain-dependent tunable optical diffusers and the optical diffusion of transmitted light via the deformable wrinkle structures was studied and adjusted. The incident light isotropically diffused through the sample at the initial state. When the wrinkle structures deformed, it showed a more pronounced isotropic optical diffusion with uniaxial tensile strain. The optical diffusion is anisotropical with a further increase in uniaxial tensile strain. The proposed method of fabricating wrinkles by UV/ozone-assisted self-wrinkling of thermal-cured polymer films is simple and cost-effective, and the obtained structures have potential applications in tunable optical diffusers.
Collapse
|
33
|
Ultranarrow and Tunable Fano Resonance in Ag Nanoshells and a Simple Ag Nanomatryushka. NANOMATERIALS 2021; 11:nano11082039. [PMID: 34443870 PMCID: PMC8399518 DOI: 10.3390/nano11082039] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/22/2021] [Revised: 08/06/2021] [Accepted: 08/07/2021] [Indexed: 12/19/2022]
Abstract
We study theoretically the Fano resonances (FRs) produced by the near-field coupling between the lowest-order (dipolar) sphere plasmon resonance and the dipolar cavity plasmon mode supported by an Ag nanoshell or the hybrid mode in a simple three-layered Ag nanomatryushka constructed by incorporating a solid Ag nanosphere into the center of Ag nanoshell. We find that the linewidth of dipolar cavity plasmon resonance or hybrid mode induced FR is as narrow as 6.8 nm (corresponding to a high Q-factor of ~160 and a long dephasing time of ~200 fs) due to the highly localized feature of the electric-fields. In addition, we attribute the formation mechanisms of typical asymmetrical Fano line profiles in the extinction spectra to the constructive (Fano peak) and the destructive interferences (Fano dip) arising from the symmetric and asymmetric charge distributions between the dipolar sphere and cavity plasmon or hybrid modes. Interestingly, by simply adjusting the structural parameters, the dielectric refractive index required for the strongest FR in the Ag nanomatryushka can be reduced to be as small as 1.4, which largely reduces the restriction on materials, and the positions of FR can also be easily tuned across a broad spectral range. The ultranarrow linewidth, highly tunability together with the huge enhancement of electric fields at the FR may find important applications in sensing, slow light, and plasmon rulers.
Collapse
|
34
|
Abstract
Optical lenses with electrically controllable focal length are of growing interest, in order to reduce the complexity, size, weight, response time and power consumption of conventional focusing/zooming systems, based on glass lenses displaced by motors. They might become especially relevant for diverse robotic and machine vision-based devices, including cameras not only for portable consumer electronics (e.g. smart phones) and advanced optical instrumentation (e.g. microscopes, endoscopes, etc.), but also for emerging applications like small/micro-payload drones and wearable virtual/augmented-reality systems. This paper reviews the most widely studied strategies to obtain such varifocal “smart lenses”, which can electrically be tuned, either directly or via electro-mechanical or electro-thermal coupling. Only technologies that ensure controllable focusing of multi-chromatic light, with spatial continuity (i.e. continuous tunability) in wavefronts and focal lengths, as required for visible-range imaging, are considered. Both encapsulated fluid-based lenses and fully elastomeric lenses are reviewed, ranging from proof-of-concept prototypes to commercially available products. They are classified according to the focus-changing principles of operation, and they are described and compared in terms of advantages and drawbacks. This systematic overview should help to stimulate further developments in the field.
Collapse
|
35
|
Micro-Actuated Tunable Hierarchical Silver Nanostructures to Measure Tensile Force for Biomedical Wearable Sensing Applications. MICROMACHINES 2021; 12:mi12050476. [PMID: 33922091 PMCID: PMC8143550 DOI: 10.3390/mi12050476] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/12/2021] [Revised: 04/16/2021] [Accepted: 04/19/2021] [Indexed: 12/02/2022]
Abstract
Commercially available biomedical wearable sensors to measure tensile force/strain still struggle with miniaturization in terms of weight, size, and conformability. Flexible and epidermal electronic devices have been utilized in these applications to overcome these issues. However, current sensors still require a power supply and some form of powered data transfer, which present challenges to miniaturization and to applications. Here, we report on the development of flexible, passive (thus zero power consumption), and biocompatible nanostructured photonic devices that can measure tensile strain in real time by providing an optical readout instead of an electronic readout. Hierarchical silver (Ag) nanostructures in various thicknesses of 20–60 nm were fabricated and embedded on a stretchable substrate using e-beam lithography and a low-temperature dewetting process. The hierarchical Ag nanostructures offer more design flexibility through a two-level design approach. A tensional force applied in one lateral (x- or y-) direction of the stretchable substrate causes a Poisson contraction in the other, and as a result, a shift in the reflected light of the nanostructures. A clear blue shift of more than 100 nm in peak reflectance in the visible spectrum was observed in the reflected color, making the devices applicable in a variety of biomedical photonic sensing applications.
Collapse
|
36
|
Tuning electrical and interfacial thermal properties of bilayer MoS 2via electrochemical intercalation. NANOTECHNOLOGY 2021; 32:265202. [PMID: 33601363 DOI: 10.1088/1361-6528/abe78a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/26/2020] [Accepted: 02/18/2021] [Indexed: 06/12/2023]
Abstract
Layered two-dimensional (2D) materials such as MoS2have attracted much attention for nano- and opto-electronics. Recently, intercalation (e.g. of ions, atoms, or molecules) has emerged as an effective technique to modulate material properties of such layered 2D films reversibly. We probe both the electrical and thermal properties of Li-intercalated bilayer MoS2nanosheets by combining electrical measurements and Raman spectroscopy. We demonstrate reversible modulation of carrier density over more than two orders of magnitude (from 0.8 × 1012to 1.5 × 1014cm-2), and we simultaneously obtain the thermal boundary conductance between the bilayer and its supporting SiO2substrate for an intercalated system for the first time. This thermal coupling can be reversibly modulated by nearly a factor of eight, from 14 ± 4.0 MW m-2K-1before intercalation to 1.8 ± 0.9 MW m-2K-1when the MoS2is fully lithiated. These results reveal electrochemical intercalation as a reversible tool to modulate and control both electrical and thermal properties of 2D layers.
Collapse
|
37
|
A Non-Volatile Tunable Terahertz Metamaterial Absorber Using Graphene Floating Gate. MICROMACHINES 2021; 12:mi12030333. [PMID: 33801056 PMCID: PMC8003937 DOI: 10.3390/mi12030333] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/07/2021] [Revised: 03/16/2021] [Accepted: 03/18/2021] [Indexed: 11/16/2022]
Abstract
Based on the graphene floating gate, a tunable terahertz metamaterial absorber is proposed. Compared with the traditional graphene–dielectric–metal absorber, our absorber has the property of being non-volatile and capacity for anti-interference. Using the finite element method, the paper investigates the absorption spectra, the electric field energy distribution, the tunability and the physical mechanism. In addition, we also analyse the influence of geometry, polarization and incident angles on the absorption. Simulation results show that the bandwidth of the absorption above 90% can reach up to 2.597 THz at the center frequency of 3.970 THz, and the maximum absorption can be tuned continuously from 14.405% to 99.864% by controlling the Fermi level from 0 eV to 0.8 eV. Meanwhile, the proposed absorber has the advantages of polarization insensitivity and a wide angle, and has potential applications in imaging, sensing and photoelectric detection.
Collapse
|
38
|
Large-Area Tunable Red/Green/Blue Tri-Stacked Quantum Dot Light-Emitting Diode Using Sandwich-Structured Transparent Silver Nanowires Electrodes. ACS APPLIED MATERIALS & INTERFACES 2020; 12:48820-48827. [PMID: 33048521 DOI: 10.1021/acsami.0c15469] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Quantum dot light-emitting diodes (QLEDs), particularly those capable of emitting light with tunable colors, have attracted the attention of researchers for their variability in lighting and displays. So far, various color-tunable QLEDs have been developed using techniques of inkjet printing or white light combining with color filters (CFs), which however suffered from difficulties in mass production. Here, by inserting an insulating resin layer between two conductive silver nanowire (AgNW) layers, a unique AgNWs/resin/AgNWs (A/R/A) sandwich-structured electrode was developed, showing rather small sheet resistances at both sides and high transparency. The as-prepared A/R/A electrode is applicable for making a large-area transparent red QLED with an external quantum efficiency (EQE) of 11.42% and a transmittance of 72.5%. Furthermore, the A/R/A electrode can be used as intermediate connecting electrodes to stack three single-colored QLEDs, forming a novel structured R/G/B tri-stacked QLED, which enables emission not only of primary colors red, green, and blue independently with the maximum EQE of 8.22, 8.07, and 2.28%, respectively, but also arbitrary hybrid colors that cover a 107% National Television System Committee (NTSC) color triangle. Such large-area full-color-tunable tri-stacked QLED offers new perspectives for the next-generation solid-state scene lighting and full-color displays.
Collapse
|
39
|
Terahertz smart dynamic and active functional electromagnetic metasurfaces and their applications. PHILOSOPHICAL TRANSACTIONS. SERIES A, MATHEMATICAL, PHYSICAL, AND ENGINEERING SCIENCES 2020; 378:20190609. [PMID: 32921231 PMCID: PMC7536021 DOI: 10.1098/rsta.2019.0609] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Accepted: 07/07/2020] [Indexed: 06/11/2023]
Abstract
The demand for smart and multi-functional applications in the terahertz (THz) frequency band, such as for communication, imaging, spectroscopy, sensing and THz integrated circuits, motivates the development of novel active, controllable and informational devices for manipulating and controlling THz waves. Metasurfaces are planar artificial structures composed of thousands of unit cells or metallic structures, whose size is either comparable to or smaller than the wavelength of the illuminated wave, which can efficiently interact with the THz wave and exhibit additional degrees of freedom to modulate the THz wave. In the past decades, active metasurfaces have been developed by combining diode arrays, two-dimensional active materials, two-dimensional electron gases, phase transition material films and other such elements, which can overcome the limitations of conventional bulk materials and structures for applications in compact THz multi-functional antennas, diffractive devices, high-speed data transmission and high-resolution imaging. In this paper, we provide a brief overview of the development of dynamic and active functional electromagnetic metasurfaces and their applications in the THz band in recent years. Different kinds of active metasurfaces are cited and introduced. We believe that, in the future, active metasurfaces will be combined with digitalization and coding to yield more intelligent metasurfaces, which can be used to realize smart THz wave beam scanning, automatic target recognition imaging, self-adaptive directional high-speed data transmission network, biological intelligent detection and other such applications. This article is part of the theme issue 'Advanced electromagnetic non-destructive evaluation and smart monitoring'.
Collapse
|
40
|
Tunable Broadband THz Waveband Absorbers Based On Graphene for Digital Coding. NANOMATERIALS 2020; 10:nano10091844. [PMID: 32942710 PMCID: PMC7558160 DOI: 10.3390/nano10091844] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/15/2020] [Revised: 09/02/2020] [Accepted: 09/09/2020] [Indexed: 11/18/2022]
Abstract
A method of coding patterns is proposed to achieve flexible control of absorption response at terahertz frequencies. The designed absorber consists of an Au-graphene pattern layer, a SiO2 layer and a metal reflective layer. Among them, we use concentrical circle structure to achieve broadband absorption, and adjust graphene’s Fermi level to achieve tunable absorption. In addition, we propose an encoding method that can achieve flexible control of the absorption response at the terahertz frequency based on the external voltage applied on the graphene membrane, thereby having a programmable function. We also use COMSOL to simulate the electric field distribution diagram to explain the underlying physical mechanism. The programmable broadband adjustable absorber proposed in this paper has potential application prospects in the fields of optical equipment, information transmission, digital coding and artificial intelligence (AI).
Collapse
|
41
|
Abstract
Understanding the individual and joint contribution of multiple protein levels toward a phenotype requires precise and tunable multigene expression control. Here we introduce a pair of mammalian synthetic gene circuits that linearly and orthogonally control the expression of two reporter genes in mammalian cells with low variability in response to chemical inducers introduced into the growth medium. These gene expression systems can be used to simultaneously probe the individual and joint effects of two gene product concentrations on a cellular phenotype in basic research or biomedical applications.
Collapse
|
42
|
One Dimensional AuAg Nanostructures as Anodic Catalysts in the Ethylene Glycol Oxidation. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E719. [PMID: 32290300 PMCID: PMC7221585 DOI: 10.3390/nano10040719] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/28/2020] [Revised: 04/01/2020] [Accepted: 04/06/2020] [Indexed: 11/17/2022]
Abstract
Direct alcohol fuel cells are highly promising as efficient power sources for various mobile and portable applications. However, for the further advancement of fuel cell technology it is necessary to develop new, cost-effective Pt-free electrocatalysts that could provide efficient alcohol oxidation and also resist cross-over poisoning. Here, we report new electrocatalytic materials for ethylene glycol oxidation, which are based on AuAg linear nanostructures. We demonstrate a low temperature tunable synthesis that enables the preparation of one dimensional (1D) AuAg nanostructures ranging from nanowires to a new nano-necklace-like structure. Using a two-step method, we showed that, by aging the initial reaction mixture at various temperatures, we produced ultrathin AuAg nanowires with a diameter of 9.2 ± 2 and 3.8 ± 1.6 nm, respectively. These nanowires exhibited a high catalytic performance for the electro-oxidation of ethylene glycol with remarkable poisoning resistance. These results highlight the benefit of 1D metal alloy-based nanocatalysts for fuel cell applications and are expected to make an important contribution to the further development of fuel cell technology.
Collapse
|
43
|
Tunable Bound States in the Continuum in All-Dielectric Terahertz Metasurfaces. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E623. [PMID: 32230957 PMCID: PMC7221776 DOI: 10.3390/nano10040623] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/18/2020] [Revised: 03/24/2020] [Accepted: 03/25/2020] [Indexed: 11/17/2022]
Abstract
In this paper, a tunable terahertz dielectric metasurfaces consisting of split gap bars in the unit cell is proposed and theoretically demonstrated, where the sharp high-quality Fano resonance can be achieved through excitation of quasi-bound states in the continuum (quasi-BIC) by breaking in-plane symmetry of the unit cell structure. With the structural asymmetry parameter decreasing and vanishing, the calculated eigenmodes spectra demonstrate the resonance changes from Fano to symmetry-protected BIC mode, and the radiative quality factors obey the inverse square law. Moreover, combining with graphene monolayer and strontium titanate materials, the quasi-BIC Fano resonance can be tuned independently, where the resonance amplitude can be tuned by adjusting the Fermi level of graphene and the resonance frequency can be tuned by controlling the temperature of strontium titanate materials. The proposed structure has numerous potential applications on tunable devices including modulators, switches, and sensors.
Collapse
|
44
|
Tunable Anion-Selective Transport through Monolayer Graphene and Hexagonal Boron Nitride. ACS NANO 2020; 14:2729-2738. [PMID: 31891480 PMCID: PMC7098055 DOI: 10.1021/acsnano.9b08168] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/16/2019] [Accepted: 12/31/2019] [Indexed: 05/23/2023]
Abstract
Membranes that selectively filter for both anions and cations are central to technological applications from clean energy generation to desalination devices. 2D materials have immense potential as these ion-selective membranes due to their thinness, mechanical strength, and tunable surface chemistry; however, currently, only cation-selective membranes have been reported. Here we demonstrate the controllable cation and anion selectivity of both monolayer graphene and hexagonal boron nitride. In particular, we measure the ionic current through membranes grown by chemical vapor deposition containing well-known defects inherent to scalably produced and wet-transferred 2D materials. We observe a striking change from cation selectivity with monovalent ions to anion selectivity by controlling the concentration of multivalent ions and inducing charge inversion on the 2D membrane. Furthermore, we find good agreement between our experimental data and theoretical predictions from the Goldman-Hodgkin-Katz equation and use this model to extract selectivity ratios. These tunable selective membranes conduct up to 500 anions for each cation and thus show potential for osmotic power generation.
Collapse
|
45
|
Brine-Soluble Zwitterionic Copolymers with Tunable Adsorption on Rocks. ACS APPLIED MATERIALS & INTERFACES 2020; 12:13568-13574. [PMID: 32150375 PMCID: PMC7307833 DOI: 10.1021/acsami.0c02247] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/05/2020] [Accepted: 02/26/2020] [Indexed: 06/10/2023]
Abstract
Injection of aqueous fluids into reservoirs as an enhanced oil recovery (EOR) tool has been of great interest in petroleum engineering. EOR using viscous polymer solutions improves the volumetric sweep efficiency. However, significant polymer adsorption on reservoir rock surfaces is one of the greatest challenges in polymer-flooding EOR. We have synthesized and characterized five zwitterionic copolymers and studied their static adsorption on limestone surfaces in seawater at high temperatures and salinities. Our results indicate that polymer adsorption directly correlates to a small percentage of functional co-monomers on the polymer backbone. One particular copolymer shows negligible static adsorption on limestone surfaces.
Collapse
|
46
|
Green and Sustainable Manufacture of Ultrapure Engineered Nanomaterials. NANOMATERIALS 2020; 10:nano10030466. [PMID: 32150817 PMCID: PMC7153611 DOI: 10.3390/nano10030466] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/10/2020] [Revised: 02/28/2020] [Accepted: 03/03/2020] [Indexed: 11/25/2022]
Abstract
Nanomaterials with very specific features (purity, colloidal stability, composition, size, shape, location…) are commonly requested by cutting-edge technologic applications, and hence a sustainable process for the mass-production of tunable/engineered nanomaterials would be desirable. Despite this, tuning nano-scale features when scaling-up the production of nanoparticles/nanomaterials has been considered the main technological barrier for the development of nanotechnology. Aimed at overcoming these challenging frontier, a new gas-phase reactor design providing a shorter residence time, and thus a faster quenching of nanoclusters growth, is proposed for the green, sustainable, versatile, cost-effective, and scalable manufacture of ultrapure engineered nanomaterials (ranging from nanoclusters and nanoalloys to engineered nanostructures) with a tunable degree of agglomeration, composition, size, shape, and location. This method enables: (1) more homogeneous, non-agglomerated ultrapure Au-Ag nanoalloys under 10 nm; (2) 3-nm non-agglomerated ultrapure Au nanoclusters with lower gas flow rates; (3) shape-controlled Ag NPs; and (4) stable Au and Ag engineered nanostructures: nanodisks, nanocrosses, and 3D nanopillars. In conclusion, this new approach paves the way for the green and sustainable mass-production of ultrapure engineered nanomaterials.
Collapse
|
47
|
Lotus-Leaf-Inspired Flexible and Tunable Random Laser. ACS APPLIED MATERIALS & INTERFACES 2020; 12:10050-10057. [PMID: 31957437 DOI: 10.1021/acsami.9b23524] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
We describe herein a flexible and tunable random laser made from a flexible poly(dimethylsiloxane) substrate. The substrate is prepared by casting via soft lithography from a lotus leaf to produce a micropapilla surface structure similar to that of a lotus leaf. The micropapilla provides efficient multiple scattering for the photons generated in the gain medium, and random lasing emerges because photons undergo closed-loop paths by scattering from three equilaterally arranged micropapillae. Given the diverse distribution of microscale features on the soft substrate, the random laser spectrum can be tuned by as much as 26.0 nm by changing the pump position. Furthermore, the random laser can be easily tuned by about 14 nm by flexing it, which modifies the micropapilla density and thereby changes the reabsorption strength of the laser dye. The photostability of the random laser is ensured by sealing the gain medium (i.e., dye solution) in a closed system. The results provide a promising method to realize a variety of laser-based applications such as optical biosensors on chips, microscale structural alteration detectors, flexible wearable devices, and multicolor (even white) random lasers.
Collapse
|
48
|
Low-Voltage Low-Pass and Band-Pass Elliptic Filters Based on Log-Domain Approach Suitable for Biosensors. SENSORS 2019; 19:s19245581. [PMID: 31861210 PMCID: PMC6960578 DOI: 10.3390/s19245581] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/21/2019] [Revised: 12/11/2019] [Accepted: 12/16/2019] [Indexed: 11/17/2022]
Abstract
This research proposes bipolar junction transistor (BJT)-based log-domain high-order elliptic ladder low-pass (LPF) and band-pass filters (BPF) using a lossless differentiator and lossless and lossy integrators. The log-domain lossless differentiator was realized by using seven BJTs and one grounded capacitor, the lossy integrator using five BJTs and one grounded capacitor, and the lossless integrator using seven BJTs and one grounded capacitor. The simplified signal flow graph (SFG) of the elliptic ladder LPF consisted of two lossy integrators, one lossless integrator, and one lossless differentiator, while that of the elliptic ladder BPF contained two lossy integrators, five lossless integrators, and one lossless differentiator. Log-domain cells were directly incorporated into the simplified SFGs. Simulations were carried out using PSpice with transistor array HFA3127. The proposed filters are operable in a low-voltage environment and are suitable for mobile equipment and further integration. The log-domain principle enables the frequency responses of the filters to be electronically tunable between 10k Hz–10 MHz. The proposed filters are applicable for low-frequency biosensors by reconfiguring certain capacitors. The filters can efficiently remove low-frequency noise and random noise in the electrocardiogram (ECG) signal.
Collapse
|
49
|
Sensitivity- Tunable Strain Sensors Based on Carbon Nanotube@Carbon Nanocoil Hybrid Networks. ACS APPLIED MATERIALS & INTERFACES 2019; 11:38160-38168. [PMID: 31545588 DOI: 10.1021/acsami.9b12600] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
A novel vanelike nanostructure based on the hybridization of carbon nanotubes and carbon nanocoils has been fabricated by a two-step chemical vapor deposition method. A flexible and sensitive strain sensor is prepared by coupling this hybrid structure with polydimethylsiloxane. By regulating the density and length of carbon nanotubes, the gauge factor and strain range of the sensors are tuned from 4.5 to 70 and 9 to 260%, respectively. These sensors exhibit high reliability and stability in a more than 10 000-cycle test and have a prompt response time of less than 37 ms. Owing to the tunable properties, these sensors show great potential in monitoring both subtle and large-scale displacements, which can meet the diverse demands of human motion monitoring.
Collapse
|
50
|
Designing 3D Digital Metamaterial for Elastic Waves: From Elastic Wave Polarizer to Vibration Control. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2019; 6:1900401. [PMID: 31453062 PMCID: PMC6702649 DOI: 10.1002/advs.201900401] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2019] [Indexed: 05/21/2023]
Abstract
Elastic wave polarizers, which can filter out linearly polarized elastic waves from hybrid elastic waves, remain a challenge since elastic waves contain both transverse and longitudinal natures. Here, a tunable, digital, locally resonant metamaterial inspired by abacus is proposed, which consists of 3D-printed octahedral frames and built-in electromagnets. By controlling current in the electromagnets, each unit cell exhibits three digital modes, where the elastic waves have different characteristics of propagation under each mode. A variety of waveguides can be formed by a combination of the three modes and desired polarization can be further filtered out from hybrid elastic waves in a tunable manner. The underlying mechanism of these polarizer-like characteristics is investigated through a combination of theoretical analysis, numerical simulation, and experimental testing. This study provides a means of filtering out the desired wave from hybrid elastic waves, and offers promise for vibration control of particle distribution and flexible structure.
Collapse
|