Engineering of glycoside hydrolase family 7 cellobiohydrolases directed by natural diversity screening

Protein engineering and screening of processive fungal cellobiohydrolases (CBHs) remain challenging due to limited expression hosts, synergy-dependency, and recalcitrant substrates. In particular, glycoside hydrolase family 7 (GH7) CBHs are critically important for the bioeconomy and typically difficult to engineer. Here, we target the discovery of highly active natural GH7 CBHs and engineering of variants with improved activity. Using experimentally assayed activities of genome mined CBHs, we applied sequence and structural alignments to top performers to identify key point mutations linked to improved activity. From ∼1500 known GH7 sequences, an evolutionarily diverse subset of 57 GH7 CBH genes was expressed in Trichoderma reesei and screened using a multiplexed activity screening assay. Ten catalytically enhanced natural variants were identified, produced, purified, and tested for efficacy using industrially relevant conditions and substrates. Three key amino acids in CBHs with performance comparable or superior to Penicillium funiculosum Cel7A were identified and combinatorially engineered into P. funiculosum cel7a, expressed in T. reesei, and assayed on lignocellulosic biomass. The top performer generated using this combined approach of natural diversity genome mining, experimental assays, and computational modeling produced a 41% increase in conversion extent over native P. funiculosum Cel7A, a 55% increase over the current industrial standard T. reesei Cel7A, and 10% improvement over Aspergillus oryzae Cel7C, the best natural GH7 CBH previously identified in our laboratory.

First evidence of a horizontally-acquired GH-7 cellobiohydrolase from a longhorned beetle genome

Xylophagous larvae of longhorned beetles (Coleoptera; Cerambycidae) efficiently break down polysaccharides of the plant cell wall, which make the bulk of their food, using a range of carbohydrate-active enzymes (CAZymes). In this study, we investigated the function and evolutionary history of the first identified example of insect-encoded members of glycoside hydrolase family 7 (GH7) derived from the Lamiinae Exocentrus adspersus. The genome of this beetle contained two genes encoding GH7 proteins located in tandem and flanked by transposable elements. Phylogenetic analysis revealed that the GH7 sequences of E. adspersus were closely related to those of Ascomycete fungi, suggesting that they were acquired through horizontal gene transfer (HGT) from fungi. However, they were more distantly related to those encoded by genomes of Crustacea and of protist symbionts of termites and cockroaches, supporting that the same enzyme family was recruited several times independently in Metazoa during the course of their evolution. The recombinant E. adspersus GH7 was found to primarily break down cellulose polysaccharides into cellobiose, indicating that it is a cellobiohydrolase, and could also use smaller cellulose oligomers as substrates. Additionally, the cellobiohydrolase activity was boosted by the presence of calcium chloride. Our findings suggest that the combination of GH7 cellobiohydrolases with other previously characterized endo-β-1,4-glucanases and β-glucosidases allows longhorned beetles like E. adspersus to efficiently break down cellulose into monomeric glucose.

LPMO AfAA9_B and Cellobiohydrolase AfCel6A from A. fumigatus Boost Enzymatic Saccharification Activity of Cellulase Cocktail

Cellulose is the most abundant polysaccharide in lignocellulosic biomass, where it is interlinked with lignin and hemicellulose. Bioethanol can be produced from biomass. Since breaking down biomass is difficult, cellulose-active enzymes secreted by filamentous fungi play an important role in degrading recalcitrant lignocellulosic biomass. We characterized a cellobiohydrolase (AfCel6A) and lytic polysaccharide monooxygenase LPMO (AfAA9_B) from Aspergillus fumigatus after they were expressed in Pichia pastoris and purified. The biochemical parameters suggested that the enzymes were stable; the optimal temperature was ~60 °C. Further characterization revealed high turnover numbers (kcat of 147.9 s-1 and 0.64 s-1, respectively). Surprisingly, when combined, AfCel6A and AfAA9_B did not act synergistically. AfCel6A and AfAA9_B association inhibited AfCel6A activity, an outcome that needs to be further investigated. However, AfCel6A or AfAA9_B addition boosted the enzymatic saccharification activity of a cellulase cocktail and the activity of cellulase Af-EGL7. Enzymatic cocktail supplementation with AfCel6A or AfAA9_B boosted the yield of fermentable sugars from complex substrates, especially sugarcane exploded bagasse, by up to 95%. The synergism between the cellulase cocktail and AfAA9_B was enzyme- and substrate-specific, which suggests a specific enzymatic cocktail for each biomass by up to 95%. The synergism between the cellulase cocktail and AfAA9_B was enzyme- and substrate-specific, which suggests a specific enzymatic cocktail for each biomass.

Expression of rice β-exoglucanase II (OsExoII) in Escherichia coli, purification, and characterization

Enzymes involved in β-glucan breakdown in plants include endoglucanases, exoglucanases and β-glucosidases. Glycoside hydrolase family 3 (GH3) exoglucanases from barley and maize and a few plant GH3 β-glucosidases have been characterized, but none from rice. A few of these enzymes have been expressed in recombinant yeast and plant systems, but bacterial expression of plant GH3 enzymes has not been successful. We expressed the rice GH3 exoglucanase OsExo2 in Escherichia coli as a thioredoxin fusion protein, while other active plant GH3 enzymes could not be produced in this system. The protein was purified over 2000-fold in three chromatographic steps. The enzyme hydrolyzed β-1,3- and β-1,4-linked oligosaccharides and polysaccharides, consistent with a role in cell wall remodeling. Of the oligosaccharides tested, it had highest catalytic efficiency toward laminaritriose, (apparent k_cat/K_m = 37.7 mM^-1s^-1). Among polysaccharides, OsExoII hydrolyzed barley mixed β-glucan and laminarin with similar efficiencies (apparent k_cat/K_m = 3.7 and 3.4 mL mg^-1 s^-1, respectively), but achieved its highest apparent k_cat with lichenan (2.9 s^-1). OsExoII was found to be stimulated by ethylene glycol, which increased the apparent k_cat and decreased the K_m and was transglycosylated. These results imply that E. coli expression may be successful for certain plant GH3 enzymes and OsExoII may be a useful enzyme for application to glycoside production.

Bridging the Micro-Macro Gap between Single-Molecular Behavior and Bulk Hydrolysis Properties of Cellulase

The microscopic kinetics of enzymes at the single-molecule level often deviate considerably from those expected from bulk biochemical experiments. Here, we propose a coarse-grained-model approach to bridge this gap, focusing on the unexpectedly slow bulk hydrolysis of crystalline cellulose by cellulase, which constitutes a major obstacle to mass production of biofuels and biochemicals. Building on our previous success in tracking the movements of single molecules of cellulase on crystalline cellulose, we develop a mathematical description of the collective motion and function of enzyme molecules hydrolyzing the surface of cellulose. Model simulations robustly explained the experimental findings at both the microscopic and macroscopic levels and revealed a hitherto-unknown mechanism causing a considerable slowdown of the reaction, which we call the crowding-out effect. The size of the cellulase molecule impacted significantly on the collective dynamics, whereas the rate of molecular motion on the surface did not.

Crystal structure of a family 6 cellobiohydrolase from the basidiomycete Phanerochaete chrysosporium

Cellobiohydrolases belonging to glycoside hydrolase family 6 (CBH II, Cel6A) play key roles in the hydrolysis of crystalline cellulose. CBH II from the white-rot fungus Phanerochaete chrysosporium (PcCel6A) consists of a catalytic domain (CD) and a carbohydrate-binding module connected by a linker peptide, like other known fungal cellobiohydrolases. In the present study, the CD of PcCel6A was crystallized without ligands, and p-nitrophenyl β-D-cellotrioside (pNPG3) was soaked into the crystals. The determined structures of the ligand-free and pNPG3-soaked crystals revealed that binding of cellobiose at substrate subsites +1 and +2 induces a conformational change of the N-terminal and C-terminal loops, switching the tunnel-shaped active site from the open to the closed form.

Binding of cellulose binding modules reveal differences between cellulose substrates

The interaction between cellulase enzymes and their substrates is of central importance to several technological and scientific challenges. Here we report that the binding of cellulose binding modules (CBM) from Trichoderma reesei cellulases Cel6A and Cel7A show a major difference in how they interact with substrates originating from wood compared to bacterial cellulose. We found that the CBM from TrCel7A recognizes the two substrates differently and as a consequence shows an unexpected way of binding. We show that the substrate has a large impact on the exchange rate of the studied CBM, and moreover, CBM-TrCel7A seems to have an additional mode of binding on wood derived cellulose but not on cellulose originating from bacterial source. This mode is not seen in double CBM (DCBM) constructs comprising both CBM-TrCel7A and CBM-TrCel6A. The linker length of DCBMs affects the binding properties, and slows down the exchange rates of the proteins and thus, can be used to analyze the differences between the single CBM. These results have impact on the cellulase research and offer new understanding on how these industrially relevant enzymes act.

The three-dimensional structure of the cellobiohydrolase Cel7A from Aspergillus fumigatus at 1.5 Å resolution

The enzymatic degradation of plant cell-wall cellulose is central to many industrial processes, including second-generation biofuel production. Key players in this deconstruction are the fungal cellobiohydrolases (CBHs), notably those from family GH7 of the carbohydrate-active enzymes (CAZY) database, which are generally known as CBHI enzymes. Here, three-dimensional structures are reported of the Aspergillus fumigatus CBHI Cel7A solved in uncomplexed and disaccharide-bound forms at resolutions of 1.8 and 1.5 Å, respectively. The product complex with a disaccharide in the +1 and +2 subsites adds to the growing three-dimensional insight into this family of industrially relevant biocatalysts.

Expression, crystal structure and cellulase activity of the thermostable cellobiohydrolase Cel7A from the fungus Humicola grisea var. thermoidea

Glycoside hydrolase family 7 (GH7) cellobiohydrolases (CBHs) play a key role in biomass recycling in nature. They are typically the most abundant enzymes expressed by potent cellulolytic fungi, and are also responsible for the majority of hydrolytic potential in enzyme cocktails for industrial processing of plant biomass. The thermostability of the enzyme is an important parameter for industrial utilization. In this study, Cel7 enzymes from different fungi were expressed in a fungal host and assayed for thermostability, including Hypocrea jecorina Cel7A as a reference. The most stable of the homologues, Humicola grisea var. thermoidea Cel7A, exhibits a 10°C higher melting temperature (T(m) of 72.5°C) and showed a 4-5 times higher initial hydrolysis rate than H. jecorina Cel7A on phosphoric acid-swollen cellulose and showed the best performance of the tested enzymes on pretreated corn stover at elevated temperature (65°C, 24 h). The enzyme shares 57% sequence identity with H. jecorina Cel7A and consists of a GH7 catalytic module connected by a linker to a C-terminal CBM1 carbohydrate-binding module. The crystal structure of the H. grisea var. thermoidea Cel7A catalytic module (1.8 Å resolution; R(work) and R(free) of 0.16 and 0.21, respectively) is similar to those of other GH7 CBHs. The deviations of several loops along the cellulose-binding path between the two molecules in the asymmetric unit indicate higher flexibility than in the less thermostable H. jecorina Cel7A.

Crystallization and preliminary X-ray diffraction analysis of Hypocrea jecorina Cel7A in two new crystal forms

Cel7A (previously known as cellobiohydrolase I) from Hypocrea jecorina was crystallized in two crystalline forms, neither of which have been previously reported. Both forms co-crystallize under the same crystallization conditions. The first crystal form belonged to space group C2, with unit-cell parameters a=152.5, b=44.9, c=57.6 Å, β=101.2°, and diffracted X-rays to 1.5 Å resolution. The second crystal form belonged to space group P6₃22, with unit-cell parameters a=b≃155, c≃138 Å, and diffracted X-rays to 2.5 Å resolution. The crystals were obtained using full-length Cel7A, which consists of a large 434-residue N-terminal catalytic domain capable of cleaving cellulose, a 27-residue flexible linker and a small 36-residue C-terminal carbohydrate-binding module (CBM). However, a preliminary analysis of the electron-density maps suggests that the linker and CBM are disordered in both crystal forms. Complete refinement and structure analysis are currently in progress.

Mode of Action of Cellulases on Dyed Cotton with a Reactive Dye

Cotton woven fabrics which were previously dyed with a reactive dye were treated with a commercial cellulase preparation. Dyeing with a reactive dye for cotton apparently inhibited the weight loss activity and saccharification activity of cellulase. In addition, dyed cotton was treated with highly purified cellulases which were exo-type cellulases (Cellobiohydrolase I (CBH I) and Cellobiohydrolase II (CBH II)) and endo-type cellulase (Endoglucanase II (EG II)). Exo-type cellulases were inhibited more than endo-type cellulase by dyeing in the case of saccharification activity. CBH I was severely inhibited by dyeing as compared with CBH II or EG II from the viewpoint of morphological changes in the fiber surface. Dyes on the cellulose substrates severely influenced CBH I in spite of the rare modification, because CBH I hydrolyzed cellulose with true-processive action. The change in the activity of each cellulase component on dyed cotton can affect the synergistic action of cellulases.

Effect of temperature on lignin-derived inhibition studied with three structurally different cellobiohydrolases

Non-productive enzyme adsorption onto lignin inhibits enzymatic hydrolysis of lignocellulosic biomass. Three cellobiohydrolases, Trichoderma reesei Cel7A (TrCel7A) and two engineered fusion enzymes, with distinctive modular structures and temperature stabilities were employed to study the effect of temperature on inhibition arising from non-productive cellulase adsorption. The fusion enzymes, TeCel7A-CBM1 and TeCel7A-CBM3, were composed of a thermostable Talaromyces emersonii Cel7A (TeCel7A) catalytic domain fused to a carbohydrate-binding module (CBM) either from family 1 or from family 3. With all studied enzymes, increase in temperature was found to increase the inhibitory effect of supplemented lignin in the enzymatic hydrolysis of microcrystalline cellulose. However, for the different enzymes, lignin-derived inhibition emerged at different temperatures. Low binding onto lignin and thermostable structure were characteristic for the most lignin-tolerant enzyme, TeCel7A-CBM1, whereas TrCel7A was most susceptible to lignin especially at elevated temperature (55 °C).

Glycosylated linkers in multimodular lignocellulose-degrading enzymes dynamically bind to cellulose

Plant cell-wall polysaccharides represent a vast source of food in nature. To depolymerize polysaccharides to soluble sugars, many organisms use multifunctional enzyme mixtures consisting of glycoside hydrolases, lytic polysaccharide mono-oxygenases, polysaccharide lyases, and carbohydrate esterases, as well as accessory, redox-active enzymes for lignin depolymerization. Many of these enzymes that degrade lignocellulose are multimodular with carbohydrate-binding modules (CBMs) and catalytic domains connected by flexible, glycosylated linkers. These linkers have long been thought to simply serve as a tether between structured domains or to act in an inchworm-like fashion during catalytic action. To examine linker function, we performed molecular dynamics (MD) simulations of the Trichoderma reesei Family 6 and Family 7 cellobiohydrolases (TrCel6A and TrCel7A, respectively) bound to cellulose. During these simulations, the glycosylated linkers bind directly to cellulose, suggesting a previously unknown role in enzyme action. The prediction from the MD simulations was examined experimentally by measuring the binding affinity of the Cel7A CBM and the natively glycosylated Cel7A CBM-linker. On crystalline cellulose, the glycosylated linker enhances the binding affinity over the CBM alone by an order of magnitude. The MD simulations before and after binding of the linker also suggest that the bound linker may affect enzyme action due to significant damping in the enzyme fluctuations. Together, these results suggest that glycosylated linkers in carbohydrate-active enzymes, which are intrinsically disordered proteins in solution, aid in dynamic binding during the enzymatic deconstruction of plant cell walls.

Droplet-based microfluidic platform for heterogeneous enzymatic assays

Heterogeneous enzymatic reactions are used in many industrial processes including pulp and paper, food, and biofuel production. Industrially-relevant optimization of the enzymes used in these processes requires assaying them with insoluble substrates. However, platforms for high throughput heterogeneous assays do not exist thereby severely increasing the cost and time of enzyme optimization, or leading to the use of assays with soluble substrates for convenient, but non-ideal, optimization. We present an innovative approach to perform heterogeneous reactions in a high throughput fashion using droplet microfluidics. Droplets provide a facile platform for heterogeneous reactions as internal recirculation allows rapid mixing of insoluble substrates with soluble enzymes. Moreover, it is easy to generate hundreds or thousands of picoliter droplets in a small footprint chip allowing many parallel reactions. We validate our approach by screening combinations of cellulases with real-world insoluble substrates, and demonstrate that the chip-based screening is in excellent agreement with the conventional screening methods, while offering advantages of throughput, speed and lower reagent consumption. We believe that our approach, while demonstrated for a biofuel application, provides a generic platform for high throughput monitoring of heterogeneous reactions.

Competitive sorption kinetics of inhibited endo- and exoglucanases on a model cellulose substrate

For the first time, the competitive adsorption of inhibited cellobiohydrolase I (Cel7A, an exoglucanase) and endoglucanase I (Cel7B) from T. longibrachiatum is studied on cellulose. Using quartz crystal microgravimetry (QCM), sorption histories are measured for individual types of cellulases and their mixtures adsorbing to and desorbing from a model cellulose surface. We find that Cel7A has a higher adsorptive affinity for cellulose than does Cel7B. The adsorption of both cellulases becomes irreversible on time scales of 30-60 min, which are much shorter than those typically used for industrial cellulose hydrolysis. A multicomponent Langmuir kinetic model including first-order irreversible binding is proposed. Although adsorption and desorption rate constants differ between the two enzymes, the rate at which each surface enzyme irreversibly binds is identical. Because of the higher affinity of Cel7A for the cellulose surface, when Cel7A and Cel7B compete for surface sites, a significantly higher bulk concentration of Cel7B is required to achieve comparable surface enzyme concentrations. Because cellulose deconstruction benefits significantly from the cooperative activity of endoglucanases and cellobiohydrolases on the cellulose surface, accounting for competitive adsorption is crucial to developing effective cellulase mixtures.

Adsorption characteristics of fungal family 1 cellulose-binding domain from Trichoderma reesei cellobiohydrolase I on crystalline cellulose: negative cooperative adsorption via a steric exclusion effect

Cellobiohydrolases (CBHs) hydrolyzing crystalline cellulose share a two-domain structure of catalytic domain (CD) and cellulose-binding domain (CBD). To focus on the binding characteristics of CBD, we analyzed the adsorption of fusion protein of fungal family 1 CBD from Trichoderma reesei CBH I and red-fluorescent protein on crystalline and amorphous celluloses. Binding data were better fitted by Hill's model with negative cooperativity than by other adsorption models, suggesting the occurrence of a steric exclusion effect among the fusion molecules on the cellulose surfaces. The degree of negative cooperativity depended on the nature of the cellulose. The significance of this phenomenon for catalysis by intact CBHI is discussed.

Purification and characterization of a novel cellobiohydrolase (PdCel6A) from Penicillium decumbens JU-A10 for bioethanol production

An acidic Cel6A, cellobiohydrolase (CBH) II, was purified from Penicillium decumbens and designated as PdCel6A. The deduced internal amino acid sequence of the novel CBH has a high degree of sequence identity with the CBH II from Aspergillus fumigatus. Surprisingly, PdCel6A exhibits characteristics comparable to that of CBH I, as well as CBH II. Similar to CBH I, the novel CBH has a specific activity of 1.9 IU/mg against p-nitrophenyl-β-d-cellobioside. The enzyme retains about 80% of its maximum activity after 4h of incubation at pH 2.0. Using delignified corncob residue as the substrate, ethanol concentration increased by 20% during simultaneous saccharification and fermentation when supplemented with low doses of PdCel6A (0.2mg/g substrate). To our knowledge, this is the first report involving a CBH I-like CBH II. The present paper provides new insight into the role of CBH II in cellulose degradation.

Enzymatic hydrolysis of cellulose by the cellobiohydrolase domain of CelB from the hyperthermophilic bacterium Caldicellulosiruptor saccharolyticus

The celB gene of Caldicellulosiruptor saccharolyticus was cloned and expressed in Escherichia coli to create a recombinant biocatalyst for hydrolyzing lignocellulosic biomass at high temperature. The GH5 domain of CelB hydrolyzed 4-nitrophenyl-β-D-cellobioside and carboxymethyl cellulose with optimum activity at pH 4.7-5.5 and 80°C. The recombinant GH5 and CBM3-GH5 constructs were both stable at 80°C with half-lives of 23 h and 39 h, respectively, and retained >94% activity after 48 h at 70°C. Enzymatic hydrolysis of corn stover and cellulose pretreated with the ionic liquid 1-ethyl-3-methylimidazolium acetate showed that GH5 and CBM3-GH5 primarily produce cellobiose, with product yields for CBM3-GH5 being 1.2- to 2-fold higher than those for GH5. Confocal microscopy of bound protein on cellulose confirmed tighter binding of CBM3-GH5 to cellulose than GH5, indicating that the enhancement of enzymatic activity on solid substrates may be due to the substrate binding activity of CBM3 domain.

Purification and characterization of a thermostable cellobiohydrolase from Fomitopsis pinicola

A screening for cellobiohydrolase (CBH) activity was performed and Fomitopsis pinicola KMJ812 was selected for further characterization as it produced a high level of CBH activity. An extracellular CBH was purified to homogeneity by sequential chromatography of F. pinicola culture supernatants. The molecular mass of the F. pinicola CBH was determined to be 64 kDa by SDS-PAGE and by size-exclusion chromatography, indicating that the enzyme is a monomer. The F. pinicola CBH showed a t1/2 value of 42 h at 70 degrees C and catalytic efficiency of 15.8 mM-1 S-1 (kcat/ Km) for p-nitrophenyl-beta-D-cellobioside, one of the highest levels seen for CBH-producing microorganisms. Its internal amino acid sequences showed a significant homology with hydrolases from glycoside hydrolase family 7. Although CBHs have been purified and characterized from other sources, the F. pinicola CBH is distinguished from other CBHs by its high catalytic efficiency and thermostability.

Catalytic mechanism of cellulose degradation by a cellobiohydrolase, CelS

The hydrolysis of cellulose is the bottleneck in cellulosic ethanol production. The cellobiohydrolase CelS from Clostridium thermocellum catalyzes the hydrolysis of cello-oligosaccharides via inversion of the anomeric carbon. Here, to examine key features of the CelS-catalyzed reaction, QM/MM (SCCDFTB/MM) simulations are performed. The calculated free energy profile for the reaction possesses a 19 kcal/mol barrier. The results confirm the role of active site residue Glu87 as the general acid catalyst in the cleavage reaction and show that Asp255 may act as the general base. A feasible position in the reactant state of the water molecule responsible for nucleophilic attack is identified. Sugar ring distortion as the reaction progresses is quantified. The results provide a computational approach that may complement the experimental design of more efficient enzymes for biofuel production.

Purification, crystallization and preliminary crystallographic analysis of the catalytic domain of the extracellular cellulase CBHI from Trichoderma harzianum

The filamentous fungus Trichoderma harzianum has a considerable cellulolytic activity that is mediated by a complex of enzymes which are essential for the hydrolysis of microcrystalline cellulose. These enzymes were produced by the induction of T. harzianum with microcrystalline cellulose (Avicel) under submerged fermentation in a bioreactor. The catalytic core domain (CCD) of cellobiohydrolase I (CBHI) was purified from the extracellular extracts and submitted to robotic crystallization. Diffraction-quality CBHI CCD crystals were grown and an X-ray diffraction data set was collected under cryogenic conditions using a synchrotron-radiation source.

High speed atomic force microscopy visualizes processive movement of Trichoderma reesei cellobiohydrolase I on crystalline cellulose

Fungal cellobiohydrolases act at liquid-solid interfaces. They have the ability to hydrolyze cellulose chains of a crystalline substrate because of their two-domain structure, i.e. cellulose-binding domain and catalytic domain, and unique active site architecture. However, the details of the action of the two domains on crystalline cellulose are still unclear. Here, we present real time observations of Trichoderma reesei (Tr) cellobiohydrolase I (Cel7A) molecules sliding on crystalline cellulose, obtained with a high speed atomic force microscope. The average velocity of the sliding movement on crystalline cellulose was 3.5 nm/s, and interestingly, the catalytic domain without the cellulose-binding domain moved with a velocity similar to that of the intact TrCel7A enzyme. However, no sliding of a catalytically inactive enzyme (mutant E212Q) or a variant lacking tryptophan at the entrance of the active site tunnel (mutant W40A) could be detected. This indicates that, besides the hydrolysis of glycosidic bonds, the loading of a cellulose chain into the active site tunnel is also essential for the enzyme movement.

Heterologous expression, crystallization and preliminary X-ray characterization of CcCel6C, a glycoside hydrolase family 6 enzyme from the basidiomycete Coprinopsis cinerea

CcCel6C is a gene that encodes a glycoside hydrolase family 6 (GH6) enzyme in the Coprinopsis cinerea genome. In the evolutionary tree of GH6 enzymes, the encoded enzyme was closely related to Cel6B from Humicola insolens, previously called endoglucanase VI, while its amino-acid sequence revealed a region corresponding to the C-terminal active-site-enclosing loop typical of cellobiohydrolase II. Here, the crystallization of CcCel6C produced in Escherichia coli is reported. The square prismatic crystal belonged to the triclinic space group P1, with unit-cell parameters a = 44.04, b = 45.11, c = 48.90 A, alpha = 77.81, beta = 87.34, gamma = 68.79 degrees. Diffraction data were collected to 1.6 A resolution.

[Cloning cellobiohydrolase I from Penicillium decumbens 114-2 with TAIL-PCR and comparing with its derepressed mutant JU-A10]

OBJECTIVE

We studied the differences in gene sequence of cellobiohydrolase I gene (cbh1) from Penicillium decumbens 114-2 and its derepressed mutant JU-A10.

METHODS

We cloned cbh1 and its full-length cDNA from Penicillium decumbens 114-2 by the modified thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR) and RT-PCR.

RESULTS

The total length of cbh1 was 1500 bp. It contained 2 introns and encoded 453 amino acids (GenBank Accession No.EF397602). The upstream sequence (1.9 kb) of cbh1 gene was also cloned and sequenced. It contained two putative binding sites for the carbon catabolite repressor CRE I and two putative binding sites for cellulases transcriptional regulator ACE I.

CONCLUSION

The derepressed strain JU-A10 was a multiple mutant of the wild strain 114-2. The mutant produced several times more cellobiohydrolase activity per ml of culture medium when compared with 114-2. The cbh1 gene sequence of the mutant was the same with the wild strain. While four single base mutations were detected on the upstream sequences (1.9 kb) of cbh1 gene.The result suggests that the evidently enhanced cellobiohydrolase activity of the mutant is not due to cbh1 protein-coded sequence . The true reason maybe refer to single base mutations of the upstream sequence that effect the transcription regulation of mutant JU-A10. As a result, the secretion of CBH I increased.

Automated docking to explore subsite binding by glycoside hydrolase family 6 cellobiohydrolases and endoglucanases

Cellooligosaccharides were computationally docked using AutoDock into the active sites of the glycoside hydrolase Family 6 enzymes Hypocrea jecorina (formerly Trichoderma reesei) cellobiohydrolase and Thermobifida fusca endoglucanase. Subsite -2 exerts the greatest intermolecular energy in binding beta-glucosyl residues, with energies progressively decreasing to either side. Cumulative forces imparting processivity exerted by these two enzymes are significantly less than by the equivalent glycoside hydrolase Family 7 enzymes studied previously. Putative subsites -4, -3, +3, and +4 exist in H. jecorina cellobiohydrolase, along with putative subsites -4, -3, and +3 in T. fusca endoglucanase, but they are less important than subsites -2, -1, +1, and +2. In general, binding adds 3-7 kcal/mol to ligand intramolecular energies because of twisting of scissile glycosidic bonds. Distortion of beta-glucosyl residues to the (2)S(O) conformation by binding in subsite -1 adds approximately 7 kcal/mol to substrate intramolecular energies.

Correlation between cellulose binding and activity of cellulose-binding domain mutants of Humicola grisea cellobiohydrolase 1

The cellulose-binding domains (CBDs) of fungal cellulases interact with crystalline cellulose through their hydrophobic flat surface formed by three conserved aromatic amino acid residues. To analyze the functional importance of these residues, we constructed CBD mutants of cellobiohydrolase 1 (CBH1) of the thermophilic fungus Humicola grisea, and examined their cellulose-binding ability and enzymatic activities. High activity on crystalline cellulose correlated with high cellulose-binding ability and was dependent on the combination and configuration of the three aromatic residues. Tyrosine works best in the middle of the flat surface, while tryptophan is the best residue in the two outer positions.

Preliminary X-ray analysis of cellobiohydrolase Cel7B from Melanocarpus albomyces

Cellobiohydrolases are enzymes that cleave off cellobiose units from cellulose chains in a processive manner. Melanocarpus albomyces Cel7B is a thermostable single-module cellobiohydrolase that has relatively low activity on small soluble substrates at room temperature. It belongs to glycoside hydrolase family 7, which includes endo-beta-1,4-glucanases and cellobiohydrolases. Cel7B was crystallized using the hanging-drop vapour-diffusion method and streak-seeding. The crystals belonged to space group P2(1), with unit-cell parameters a = 50.9, b = 94.5, c = 189.8 A, beta = 90.0 degrees and four monomers in the asymmetric unit. Analysis of the intensity statistics showed that the crystals were pseudo-merohedrally twinned, with a twinning fraction of 0.37. X-ray diffraction data were collected at 1.6 A resolution using synchrotron radiation.

Molecular modeling suggests induced fit of Family I carbohydrate-binding modules with a broken-chain cellulose surface

Cellobiohydrolases are the most effective single component of fungal cellulase systems; however, their molecular mode of action on cellulose is not well understood. These enzymes act to detach and hydrolyze cellodextrin chains from crystalline cellulose in a processive manner, and the carbohydrate-binding module (CBM) is thought to play an important role in this process. Understanding the interactions between the CBM and cellulose at the molecular level can assist greatly in formulating selective mutagenesis experiments to confirm the function of the CBM. Computational molecular dynamics was used to investigate the interaction of the CBM from Trichoderma reesei cellobiohydrolase I with a model of the (1,0,0) cellulose surface modified to display a broken chain. Initially, the CBM was located in different positions relative to the reducing end of this break, and during the simulations it appeared to translate freely and randomly across the cellulose surface, which is consistent with its role in processivity. Another important finding is that the reducing end of a cellulose chain appears to induce a conformational change in the CBM. Simulations show that the tyrosine residues on the hydrophobic surface of the CBM, Y5, Y31 and Y32 align with the cellulose chain adjacent to the reducing end and, importantly, that the fourth tyrosine residue in the CBM (Y13) moves from its internal position to form van der Waals interactions with the cellulose surface. As a consequence of this induced change near the surface, the CBM straddles the reducing end of the broken chain. Interestingly, all four aromatic residues are highly conserved in Family I CBM, and thus this recognition mechanism may be universal to this family.

Isolation of cellulolytic enzymes from moldy silage by new culture-independent strategy

A culture-independent strategy has been developed for investigation of cellulases in moldy silage. By the qualitative differences in the adsorption of cellulases on lingo-cellulosics, a new cellobiohydrolase (CBH) with apparent molecular mass of 194 kDa was isolated and characterized. The entire extracellular proteins of silage were separated by two-dimensional gel electrophoresis, and five potential endoglucanases were identified by activity staining. These results demonstrate the feasibility of direct screening cellulases from environment without microorganism cultivation and this strategy could be expected to facilitate the research of uncultured microorganisms.

Biochemical and molecular characterization of a cellobiohydrolase from Trametes versicolor

A cellobiohydrolase-encoding cDNA, Tvcel7a, from Trametes versicolor has been cloned and expressed in Aspergillus niger. The deduced amino acid sequence shows that Tvcel7a encodes a 456-amino acid polypeptide belonging to glycosyl hydrolase family 7. TvCel7a possesses a 19-amino acid secretion signal but does not possess a linker region nor a carbohydrate-binding domain. Two peaks of activity were obtained after TvCel7a was purified to apparent homogeneity by gel-filtration followed by anion-exchange chromatography. Mass spectrometry performed on the purified proteins confirmed that both peaks corresponded to the predicted sequence of the T. versicolor cellulase. The biochemical properties of the purified TvCel7a obtained from both peaks were studied in detail. The pH and temperature optima were 5.0 and 40 degrees C, respectively. The enzyme was stable over a pH range extending from pH 3.0 to 9.0 and at temperatures lower than 50 degrees C. The kinetic parameters with the substrate p-nitrophenyl beta-D: -cellobioside (pNPC) were 0.58 mM and 1.0 micromol/min/mg protein for the purified TvCel7a found in both peaks 1 and 2. TvCel7a catalyzes the hydrolysis of pNPC, filter paper, beta-glucan, and avicel to varying extents, but no detectable hydrolysis was observed when using the substrates carboxymethylcellulose, laminarin and pNPG.

Effect of the cellulose-binding domain on the catalytic activity of a β-glucosidase from Saccharomycopsis fibuligera

Enzyme engineering was performed to link the beta-glucosidase enzyme (BGL1) from Saccharomycopsis fibuligera to the cellulose-binding domain (CBD2) of Trichoderma reesei cellobiohydrolase (CBHII) to investigate the effect of a fungal CBD on the enzymatic characteristics of this non-cellulolytic yeast enzyme. Recombinant enzymes were constructed with single and double copies of CBD2 fused at the N-terminus of BGL1 to mimic the two-domain organization displayed by cellulolytic enzymes in nature. The engineered S. fibuligera beta-glucosidases were expressed in Saccharomyces cerevisiae under the control of phosphoglycerate-kinase-1 promoter (PGK1 ( P )) and terminator (PGK1 ( T )) and yeast mating pheromone alpha-factor secretion signal (MFalpha1 ( S )). The secreted enzymes were purified and characterized using a range of cellulosic and non-cellulosic substrates to illustrate the effect of the CBD on their enzymatic activity. The results indicated that the recombinant enzymes of BGL1 displayed a 2-4-fold increase in their hydrolytic activity toward cellulosic substrates like avicel, amorphous cellulose, bacterial microcrystalline cellulose, and carboxy methyl cellulose in comparison with the native enzyme. The organization of the CBD in these recombinant enzymes also resulted in enhanced substrate affinity, molecular flexibility and synergistic activity, thereby improving the ability of the enzymes to act on and hydrolyze cellulosic substrates, as characterized by adsorption, kinetics, thermal stability, and scanning electron microscopic analyses.

Activation of crystalline cellulose to cellulose IIII results in efficient hydrolysis by cellobiohydrolase

The crystalline polymorphic form of cellulose (cellulose I(alpha)-rich) of the green alga, Cladophora, was converted into cellulose III(I) and I(beta) by supercritical ammonium and hydrothermal treatments, respectively, and the hydrolytic rate and the adsorption of Trichoderma viride cellobiohydrolase I (Cel7A) on these products were evaluated by a novel analysis based on the surface density of the enzyme. Cellobiose production from cellulose III(I) was more than 5 times higher than that from cellulose I. However, the amount of enzyme adsorbed on cellulose III(I) was less than twice that on cellulose I, and the specific activity of the adsorbed enzyme for cellulose III(I) was more than 3 times higher than that for cellulose I. When cellulose III(I) was converted into cellulose I(beta) by hydrothermal treatment, cellobiose production was dramatically decreased, although no significant change was observed in enzyme adsorption. This clearly indicates that the enhanced hydrolysis of cellulose III(I) is related to the structure of the crystalline polymorph. Thus, supercritical ammonium treatment activates crystalline cellulose for hydrolysis by cellobiohydrolase.

Gas phase noncovalent protein complexes that retain solution binding properties: Binding of xylobiose inhibitors to the beta-1, 4 exoglucanase from cellulomonas fimi

Tandem mass spectrometry has been used to compare gas-phase and solution binding of three small-molecule inhibitors to the wild type and three mutant forms of the catalytic domain of Cex, an enzyme that hydrolyses xylan and xylo-oligosaccharides. The inhibitors, xylobiosyl-deoxynojirimycin, xylobiosyl-isofagomine lactam, and xylobiosyl-isofagomine consist of a common distal xylose linked to different proximal aza-sugars. The three mutant forms of the enzyme contain the substitutions Asn44Ala, Gln87Met, and Gln87Tyr that alter the binding interactions between Cex and the distal sugar of each inhibitor. An electrospray ionization (ESI) triple quadrupole MS/MS system is used to measure the internal energies, DeltaE(int), that must be added to gas-phase ions to cause dissociation of the noncovalent enzyme-inhibitor complexes. Collision cross sections of ions of the apo-enzyme and enzyme-inhibitor complexes, which are required for the calculations of DeltaE(int), have also been measured. The results show that, in the gas phase, enzyme-inhibitor complexes have more compact, folded conformations than the corresponding apo-enzyme ions. With the mutant enzymes, the effects of substituting a single residue can be detected. The energies required to dissociate the gas-phase complexes follow the same trend as the values of DeltaG0 for dissociation of the complexes in solution. This trend is observed both with different inhibitors, which probe binding to the proximal sugar, and with mutants of Cex, which probe binding to the distal sugar. Thus the gas-phase complexes appear to retain much of their solution binding characteristics.

pH dependency of ligand binding to cellobiohydrolase 1 (Cel7A)

The affinity and enantioselectivity have been determined for designed propranolol derivatives as ligands for Cel7A by capillary electrophoresis (CE) at pH 7.0. These results have been compared to measurements at pH 5.0. In agreement with previous studies, the affinity increased at the higher pH. However, the affinity was not as dependent of the ligand structure at pH 7.0 as at pH 5.0, and the selectivity was generally decreased. Instead, at pH 7.0, the changes in binding were mainly dependent on the presence of additional dihydroxyl groups, indicating an increased importance of the electrostatic interactions. To evaluate the pH dependent variations in binding, changes in both the ligand and in the enzyme had to be taken into account. To ensure that the ligands had the same charge in all measurements, pKa-values of all compounds were determined. The ligand-protein interaction has also been studied by inhibition experiments at both pHs to evaluate the specific binding to the active site when competing with the substrate p-nitrophenyl lactoside (pNPL). With support of docking computations we propose a hypothesis on the effect of the ligand structure and pH dependency of the binding and selectivity of amino alcohols to Cel7A.

Surface density of cellobiohydrolase on crystalline celluloses

The enzymatic kinetics of glycoside hydrolase family 7 cellobiohydrolase (Cel7A) towards highly crystalline celluloses at the solid-liquid interface was evaluated by applying the novel concept of surface density (rho) of the enzyme, which is defined as the amount of adsorbed enzyme divided by the maximum amount of adsorbed enzyme. When the adsorption levels of Trichoderma viride Cel7A on cellulose I(alpha) from Cladophora and cellulose I(beta) from Halocynthia were compared, the maximum adsorption of the enzyme on cellulose I(beta) was approximately 1.5 times higher than that on cellulose I(alpha), although the rate of cellobiose production from cellulose I(beta) was lower than that from cellulose I(alpha). This indicates that the specific activity (k) of Cel7A adsorbed on cellulose I(alpha) is higher than that of Cel7A adsorbed on cellulose I(beta). When k was plotted versus rho, a dramatic decrease of the specific activity was observed with the increase of surface density (rho-value), suggesting that overcrowding of enzyme molecules on a cellulose surface lowers their activity. An apparent difference of the specific activity was observed between crystalline polymorphs, i.e. the specific activity for cellulose I(alpha) was almost twice that for cellulose I(beta). When cellulose I(alpha) was converted to cellulose I(beta) by hydrothermal treatment, the specific activity of Cel7A decreased and became similar to that of native cellulose I(beta) at the same rho-value. These results indicate that the hydrolytic activity (rate) of bound Cel7A depends on the nature of the crystalline cellulose polymorph, and an analysis that takes surface density into account is an effective means to evaluate cellulase kinetics at a solid-liquid interface.

Estimation of cellobiohydrolase I activity by numerical differentiation of dynamic ultraviolet spectroscopy

1,4-beta-D-glucan cellobiohydrolase I (CBH I), p-nitrophenyl beta-D-cellobioside, p-nitrophenol and cellobiose show distinct ultraviolet spectra, allowing the design of an assay to track the dynamic process of p-nitrophenyl beta-D-cellobioside hydrolysis by CBH I. Based on the linear relationship between p-nitrophenol formation in the hydrolysate and its first derivative absorption curve of AUC340-400 nm (area under the curve), a new sensitive assay for the determination of CBH I activity was developed. The dynamic parameters of catalysis reaction, such as Vm and kcat, can all be derived from this result. The influence of beta-glucosidase and endoglucanase in crude enzyme sample on the assay was discussed in detail. This approach is useful for accurate determination of the activity of CBHs.

[Purification and characterization of a cellobiohydrolase from the thermophilic fungus Chaetomium thermophilus CT2]

Chaetomium thermophilus CT2 was a cellulolytic fungus. It was a widely-existing saprophyte, which grower rapidly in soil. The cellulases synthesized by C. thermophilus CT2 was overall, consisting of three principal types of enzymes. The cellobiohydrolase was one of these three cellulases, which was associated with the endo-beta-1,4-glucanase and beta-glucosidase activities. C. thermophilus CT2 produced cellobiohydrolase available at 50 degrees C, when grown on ferment liquid substrate, containing 1% Avicel, 0.14% (NH4 )2SO4, 0.2% KH2PO4, 0.03% CaC2 x 2H2O, 0.03% MnSO4 x 7H2O, 0.1% peptone, 0.05% yeast extract, 0.1% Tween 80 and trace element solution at 1mL/L, containing 18mmol/L FeSO4 x 7H2O, 6.6mmol/L MnSO4, 4.8mmol/L ZnSO4 x 7H2O and 15mmol/L COCl2. A cellobiohydrolase was purified to homogeneity by an inexpensive and straightforward method for extraction of the enzyme involving fractional ammonium sulphate precipitation, ion-exchange chromatography on DEAE-Sepharose Fast Flow, gel filtration on Sephacryl S-100 and ion-exchange chromatography on Q Sepharose Fast Flow. The molecular weight of the enzyme was estimated to be 66.3kDa by 12.5% SDS-PAGE and was to be 67.1kDa by gel filtration on Sephacryl S-100 respectively. Kinetic studies of the purified cellobiohydrolase of C. thermophilus CT2 showed that the Km for p-NPC (p-trophenylbeta-d-cellobioside) was 0.956mmol/L as determined from a Lineweaver-Bark plot. Optimum enzyme activity was at 65 degrees C and pH5.0. It was thermostable at 60 degrees C and remained 20% activity after 20min at 80 degrees C. The half life time of the enzyme at 70 degrees C was 1h. It indicated that the cellobiohydrolase possessed of excellent acid stability and thermostable property. The properties of the cellobiohydrolase make it possible to be good material in scientific researches of protein thermostable mechanism and good model for designing and constructing a new type protein in industry. The enzyme may also provide instructive insight on the diversity and mechanism of cellulose degradation by C. thermophilus CT2. As a thermophilic fungus C. thermophilus CT2 is an attractive potential source of cellulases. It indicates that C. thermophilus CT2 may be a new excellent industrialized fungus for producing cellulases through molecule biology means.

Diversity of the exoproteome of Fusarium graminearum grown on plant cell wall

The exoproteome of the fungus Fusarium graminearum grown on glucose and on hop (Humulus lupulus, L.) cell wall has been investigated. The culture medium was found to contain a higher quantity of proteins and the proteins are more diverse when the fungus is grown on cell wall. Using both 1D and 2D electrophoresis followed by mass spectrometry analysis and protein identification based on similarity searches, 84 unique proteins were identified in the cell wall-grown fungal exoproteome. Many are putatively implicated in carbohydrate metabolism, mainly in cell wall polysaccharide degradation. The predicted carbohydrate-active enzymes fell into 24 different enzymes classes, and up to eight different proteins within a same class are secreted. This indicates that fungal metabolism becomes oriented towards synthesis and secretion of a whole arsenal of enzymes able to digest almost the complete plant cell wall. Cellobiohydrolase is one of the only four proteins found both after growth on glucose and on plant cell wall and we propose that this enzyme could act as a sensor of the extracellular environment. Extensive knowledge of this very diverse F. graminearum exoproteome is an important step towards the full understanding of Fusarium/plants interactions.

Enzymatic kinetic of cellulose hydrolysis: inhibition by ethanol and cellobiose

The ethanol effect on the Trichoderma reesei cellulases was studied to quantify and clarify this inhibition type. To determine inhibition parameters of crude cellulase and purified exoglucanase Cel7A, integrated Michaelis-Menten equations were used assuming the presence of two inhibitors: cellobiose as the reaction product and ethanol as a possible bioproduct of cellulose fermentation. It was found that hydrolysis of cellulose by crude enzyme follows a model that considers noncompetitive inhibition by ethanol, whereas Cel7A is very slightly competitively inhibited. Crude cellulase is much more inhibited (K(iul) = K(icl) = 151.9 mM) than exoglucanase Cel7A (K(icl) = 1.6 x 1015 mM). Also, calculated inhibition constants showed that cellobiose inhibition is more potent than ethanol inhibition both for the crude enzyme as well as exoglucanase Cel7A.

Domain coupling in a multimodular cellobiohydrolase CbhA fromClostridium thermocellum

Cellobiohydrolase A (CbhA) from Clostridium thermocellum is composed of an N-terminal carbohydrate-binding domain 4 (CBD4), an immunoglobulin-like domain (Ig), a glycoside hydrolase 9 (GH9), X1(1) and X1(2) domains, a CBD3, and a dockerin domain. All domains, except the Ig, bind Ca2+. The following constructs were made: X1(2), X1(1)X1(2), CBD3, X1(1)X1(2)-CBD3, Ig, GH9, Ig-GH9, Ig-GH9-X1(1)X1(2), and Ig-GH9-X1(1)X1(2)-CBD3. Interactions between domains in (1) buffer, (2) with Ca2+, or (3) ethylenediaminetetraacetic acid (EDTA) were studied by differential scanning calorimetry. Thermal unfoldings of all constructs were irreversible. Calcium increased T(d) and cooperativity of unfolding. Multi-domain constructs exhibited more cooperative unfolding in buffer and in the presence of EDTA than did individual domains. They denatured by mechanism simpler than expected from their modular architecture. The results indicate that domain coupling in thermophilic proteins constitutes a significant stabilizing factor.

[Hydrogen-bond state analysis of cellobiohydrolase I molecule from Trichoderma viride]

Hydrogen-bond states on cellobiohydrolase II (CBH II) of Trichoderma viride were analysed by laser Raman spectroscopic method used to reveal molecular normal modes of vibration character. The results indicated that hydrogen-bond ability of carbonyl oxygen-atom of amide I was raised in two types of aqueous solution samples (6.0 and 8.0 of pH value) compared to the solid sample. The variation trend of beta structure modes was similar between amide II and amide I. As far as the ability of hydrogen-bond forming is concerned, tryptophan (Trp) and tyrosine (Typ) residues are strong hydrogen proton donor in pH 6.0 and solid sample, thus proving the results of previously spatial structure analysis. By analysis of free S-H character, the -S-S- construction in Trichoderma viride mature peptide has been proved to be the same as that of Trichoderma reesei.

Enhanced production of cellobiohydrolases in Trichoderma reesei and evaluation of the new preparations in biofinishing of cotton

In the search for suitable cellulase combinations for industrial biofinishing of cotton, five different types of Trichoderma reesei strains were constructed for elevated cellobiohydrolase production: CBHI overproducers with and without endoglucanase I (EGI), CBHII overproducers with and without endoglucanase II (EGII) and strains overproducing both CBHI and CBHII without the major endoglucanases I and II. One additional copy of cbh1 gene increased production of CBHI protein 1.3-fold, and two copies 1.5-fold according to ELISA (enzyme-linked immunosorbent assay). The level of total secreted proteins was increased in CBHI transformants as compared to the host strain. One copy of the cbh2 expression cassette in which the cbh2 was expressed from the cbh1 promoter increased production of CBHII protein three- to four-fold when compared to the host strain. T. reesei strains producing elevated amounts of both CBHI and CBHII without EGI and EGII were constructed by replacing the egl1 locus with the coding region of the cbh1 gene and the egl2 locus with the coding region of cbh2. The cbh1 was expressed from its own promoter and the cbh2 gene using either the cbh1 or cbh2 promoter. Production of CBHI by the CBH-transformants was increased up to 1.6-fold and production of CBHII up to 3.4-fold as compared with the host strain. Approximately similar amounts of CBHII protein were produced by using cbh1 or cbh2 promoters. When the enzyme preparation with elevated CBHII content was used in biofinishing of cotton, better depilling and visual appearance were achieved than with the wild type preparation; however, the improvement was not as pronounced as with preparations with elevated levels of endoglucanases (EG).

Tandem repeat of a seven-bladed beta-propeller domain in oligoxyloglucan reducing-end-specific cellobiohydrolase

Oligoxyloglucan reducing-end-specific cellobiohydrolase (OXG-RCBH; EC 3.2.1.150) is an exoglucanase that recognizes the reducing end of oligoxyloglucan and releases two glucosyl residue segments from the main chain. The X-ray crystal structure of OXG-RCBH determined at 2.2 A resolution reveals a unique feature of this enzyme; OXG-RCBH consists of a tandem repeat of two similar domains, which are both folded into seven-bladed beta-propeller structures. The sequence alignment of the propeller blades, based on the structure, indicates that a weak repeat of the amino acid sequence occurred seven times to construct each domain. There is a cleft that can accommodate the substrate oligosaccharide between the two domains, which is a putative substrate binding subsite. Mutation of either Asp35 or Asp465, located in the putative catalytic center, to Asn resulted in a protein with no detectable catalytic activity, indicating the critical role of these amino acids in catalysis.

Inhibition of the Trichoderma reesei cellulases by cellobiose is strongly dependent on the nature of the substrate

The inhibition effect of cellobiose on the initial stage of hydrolysis when cellobiohydrolase Cel 7A and endoglucanases Cel 7B, Cel 5A, and Cel 12A from Trichoderma reesei were acting on bacterial cellulose and amorphous cellulose that were [(3)H]- labeled at the reducing end was quantified. The apparent competitive inhibition constant (K(i)) for Cel 7A on [(3)H]-bacterial cellulose was found to be 1.6 +/- 0.5 mM, 100-fold higher than that for Cel 7A acting on low-molecular-weight model substrates. The hydrolysis of [(3)H]-amorphous cellulose by endoglucanases was even less affected by cellobiose inhibition with apparent K(i) values of 11 +/- 3 mM and 34 +/- 6 mM for Cel 7B and Cel 5A, respectively. Contrary to the case for the other enzymes studied, the release of radioactive label by Cel 12A was stimulated by cellobiose, possibly due to a more pronounced transglycosylating activity. Theoretical analysis of the inhibition of Cel 7A by cellobiose predicted an inhibition analogous to that of mixed type with two limiting cases, competitive inhibition if the prevalent enzyme-substrate complex without inhibitor is productive and conventional mixed type when the prevalent enzyme-substrate complex is nonproductive.

Combining gel and capillary electrophoresis, nano-LC and mass spectrometry for the elucidation of post-translational modifications of Trichoderma reesei cellobiohydrolase I

N-Glycosylation of cellobiohydrolase I from the fungus Trichoderma reesei (strain Rut-C30) is studied using a combination of electrophoretic, chromatographic and mass spectrometric techniques. As four potential N-glycosylation sites and several uncharged and phosphorylated high-mannose glycans are present, a large number of glycoforms and phospho-isoforms can be expected. Isoelectric focusing both in gel and in capillary format was successfully applied for the separation of the phospho-isoforms. They were extracted in their intact form from the gel and subsequently analysed by nanospray-Q-TOF-MS, thereby making use of a powerful two-dimensional technique. Nano-LC/MS/MS on a Q-Trap MS further allowed the determination of the glycosylation sites. As a novel approach, an oxonium ion was used in precursor ion scanning for selective detection of glycopeptides containing phosphorylated high-mannose glycans.

Interactions between immunoglobulin-like and catalytic modules in Clostridium thermocellum cellulosomal cellobiohydrolase CbhA

Cellobiohydrolase CbhA from Clostridium thermocellum cellulosome is a multi-modular protein composed starting from the N-terminus of a carbohydrate-binding module (CBM) of family 4, an immunoglobulin(Ig)-like module, a catalytic module of family 9 glycoside hydrolases (GH9), X1(1) and X1(2) modules, a CBM of family 3 and a dockerin module. Deletion of the Ig-like module from the Ig-GH9 construct results in complete inactivation of the GH9 module. The crystal structure of the Ig-GH9 module pair reveals the existence of an extensive module interface composed of over 40 amino acid residues of both modules and maintained through a large number of hydrophilic and hydrophobic interactions. To investigate the importance of these interactions between the two modules, we compared the secondary and tertiary structures and thermostabilities of the individual Ig-like and GH9 modules and the Ig-GH9 module pair using both circular dichroism (CD) spectroscopy and differential scanning calorimetry (DSC). Thr230, Asp262 and Asp264 of the Ig-like module are located in the module interface of the Ig-GH9 module pair and are suggested to be important in 'communication' between the modules. These residues were mutated to alanyl residues. The structure, stability and catalytic properties of the native Ig-GH9 and its D264A and T230A/D262A mutants were compared. The results indicate that despite being able to fold relatively independently, the Ig-like and GH9 modules interact and these interactions affect the final fold and stability of each module. Mutations of one or two amino acid residues lead to destabilization and change of the mechanism of thermal unfolding of the polypeptides. The enzymatic properties of native Ig-GH9, D264A and T230A/D262A mutants are similar. The results indicate that inactivation of the GH9 module occurs as a result of multiple structural disturbances finally affecting the topology of the catalytic center.

Three-dimensional structure of a thermostable native cellobiohydrolase, CBH IB, and molecular characterization of the cel7 gene from the filamentous fungus, Talaromyces emersonii

The X-ray structure of native cellobiohydrolase IB (CBH IB) from the filamentous fungus Talaromyces emersonii, PDB 1Q9H, was solved to 2.4 A by molecular replacement. 1Q9H is a glycoprotein that consists of a large, single domain with dimensions of approximately 60 A x 40 A x 50 A and an overall beta-sandwich structure, the characteristic fold of Family 7 glycosyl hydrolases (GH7). It is the first structure of a native glycoprotein and cellulase from this thermophilic eukaryote. The long cellulose-binding tunnel seen in GH7 Cel7A from Trichoderma reesei is conserved in 1Q9H, as are the catalytic residues. As a result of deletions and other changes in loop regions, the binding and catalytic properties of T. emersonii 1Q9H are different. The gene (cel7) encoding CBH IB was isolated from T. emersonii and expressed heterologously with an N-terminal polyHis-tag, in Escherichia coli. The deduced amino acid sequence of cel7 is homologous to fungal cellobiohydrolases in GH7. The recombinant cellobiohydrolase was virtually inactive against methylumberiferyl-cellobioside and chloronitrophenyl-lactoside, but partial activity could be restored after refolding of the urea-denatured enzyme. Profiles of cel7 expression in T. emersonii, investigated by Northern blot analysis, revealed that expression is regulated at the transcriptional level. Putative regulatory element consensus sequences for cellulase transcription factors have been identified in the upstream region of the cel7 genomic sequence.

Prediction on the chiral behaviors of drugs with amine moiety on the chiral cellobiohydrolase stationary phase using a partial least square method

Quantitative Structure-Resolution Relationship (QSRR) using the Comparative Molecular Field Analysis (CoMFA) software was applied to predict the chromatographic behaviors of chiral drugs with an amine moiety on the chiral cellobiohydrolase (CBH) columns. As a result of the Quantitative CoMFA-Resolution Relationship study, using the partial least square method, prediction of the behavior of drugs with amine moiety upon chiral separation became possible from their three dimensional molecular structures. When a mixed mobile phase of 10 mM aqueous phosphate buffer (pH 7.0) - isopropanol (95:5) was employed, the best Quantitative CoMFA-Resolution Relationship, derived from the study, provided a cross-validated q2 = 0.933, a normal r2 = 0.995, while the best Quantitative CoMFA-Separation Factor Relationship, also derived from the study, yielded a cross-validated q2 = 0.939, a normal r2 = 0.991. When all of these results are considered, this QSRR-CoMFA analysis appears to be a very useful tool for the preliminary prediction on the chromatographic behaviors of drugs with an amine moiety inside chiral CBH columns.

Novel cellulase profile of Trichoderma reesei strains constructed by cbh1 gene replacement with eg3 gene expression cassette

To construct strains of the filamentous fungus Trichoderma reesei with low cellobiohydrolases while high endoglucanase activity, the P(cbh1)-eg3-T(cbh1) cassette was constructed and the coding sequence of the cellobiohydrolase I (CBHI) gene was replaced with the coding sequence of the eg3 gene by homologous recombination. Disruption of the cbh1 gene was confirmed by PCR, Southern dot blot and Western hybridization analysis in two transformants denoted as L13 and L29. The filter paper-hydrolyzing activity of strain L29 was 60% of the parent strain Rut C30, and the CMCase activity was increased by 33%. This relatively modest increase suggested that the eg3 cDNA under the control of the cbh1 promoter was not efficiently transcribed as the wild type cbhl gene. However our results confirmed that homologous recombination could be used to construct strains of the filamentous fungus Trichoderma reesei with novel cellulase profile. Such strains are of interest from the basic science perspective and also have potential in ustrial applications.