1
|
Environmentally Friendly and Biodegradable Ultrasensitive Piezoresistive Sensors for Wearable Electronics Applications. ACS APPLIED MATERIALS & INTERFACES 2020; 12:8761-8772. [PMID: 31972077 DOI: 10.1021/acsami.9b21739] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Highly sensitive, flexible sensors that can be manufactured with minimum environmental footprint and be seamlessly integrated into wearable devices are required for real-time tracking of complex human movement, gestures, and health conditions. This study reports on how biodegradation can be used to enhance the sensitivity and electromechanical performance of piezoresistive sensors. Poly(glycerol sebacate) (PGS) elastomeric porous sensor was synthesized and blended with multiwall carbon nanotubes (MWCNTs) and sodium chloride (NaCl). Because of their unique porous characteristics, a single linear behavior over a large range of pressures (≤8 kPa) and an increase in their sensitivity from 0.12 ± 0.03 kPa-1 up to 8.00 ± 0.20 kPa-1 was achieved after 8 weeks in a simulated body fluid media. They can detect very low pressures (100 Pa), with negligible hysteresis, reliability, long lifetime (>200 000 cycles), short response time (≤20 ms), and high force sensitivity (≤4 mN). The characteristics of the developed foam sensors match the sensing characteristics of the human finger to pave the way toward low-footprint wearable devices for applications including human movement and condition monitoring, recreation, health and wellness, virtual reality, and tissue engineering.
Collapse
|
2
|
Molecularly engineered metal-based bioactive soft materials - Neuroactive magnesium ion/polymer hybrids. Acta Biomater 2019; 85:310-319. [PMID: 30586648 DOI: 10.1016/j.actbio.2018.12.040] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2018] [Revised: 12/13/2018] [Accepted: 12/21/2018] [Indexed: 02/07/2023]
Abstract
The development of bioactive soft materials that can guide cell behavior and have biomimetic mechanical properties is an active and challenging topic in regenerative medicine. A common strategy to create a bioactive soft material is the integration of biomacromolecules with polymers. However, limited by their complex structures and sensitivity to temperature and chemicals, it is relatively difficult to maintain the bioactivity of biomacromolecules during their preparation, storage, and application. Here, a new kind of bioactive soft material based on the molecular integration of metal ions and polymers is designed and exemplified by a hybrid of magnesium ion (Mg2+) and poly(glycerol-sebacate-maleate) (PGSM-Mg). Mg2+ was firmly incorporated into PGSM molecules through a complexation interaction as evidenced by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). The PGSM matrix provided the soft nature and facile processing of the hybrid, which could serve as an injectable material and be fabricated into elastic porous three-dimensional (3D) scaffolds. The Mg2+ immobilized in the PGSM chain conferred neuroactivity to the resultant hybrid. PGSM-Mg exhibited adequate biodegradability and a sustained release of Mg2+. PGSM-Mg 3D scaffolds promoted the adhesion and proliferation of Schwann cells (SCs) more effectively than poly(lactic-co-glycolic acid) (PLGA) scaffolds. Furthermore, SCs on PGSM-Mg scaffolds expressed significantly more neural specific genes than those on PLGA, PGS, and PGSM, including nerve growth factor (NGF) and neurotrophic factor-3 (NTF3). All these results indicated that Mg2+ immobilized through molecular integration could efficiently regulate the bioactivity of polymers. In view of the wide availability, diverse bioactivity, and high stability of metal ions, the strategy of molecular coupling of metal ions and polymers is expected to be a new general approach to construct bioactive soft materials. STATEMENT OF SIGNIFICANCE: Bioactive soft materials are designed on the basis of the molecular integration of metal ions and polymers. Immobilized metal ions offer a new way to endow bioactivity to polymers. Different from biomolecules such as proteins and genes, metal ions are quite stable and can resist harsh processing conditions. Further, the polymeric matrix provides the soft nature and facile processing of the hybrid. Different from stiff metal-containing inorganic materials, the hybrid is a biomimetic soft material and can be readily processed just like its polymer precursor under mild conditions. In view of the diversity of metal ions and polymers, this strategy is expected to be a new powerful and general approach to construct bioactive soft materials for a wide range of biomedical applications.
Collapse
|
3
|
Self-assembled, ellipsoidal polymeric nanoparticles for intracellular delivery of therapeutics. J Biomed Mater Res A 2018; 106:2048-2058. [PMID: 29577576 PMCID: PMC6093774 DOI: 10.1002/jbm.a.36400] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2017] [Revised: 02/17/2018] [Accepted: 03/15/2018] [Indexed: 02/06/2023]
Abstract
Nanoparticle shape has emerged as a key regulator of nanoparticle transport across physiological barriers, intracellular uptake, and biodistribution. We report a facile approach to synthesize ellipsoidal nanoparticles through self-assembly of poly(glycerol sebacate)-co-poly(ethylene glycol) (PGS-co-PEG). The PGS-PEG nanoparticle system is highly tunable, and the semiaxis length of the nanoparticles can be modulated by changing PGS-PEG molar ratio and incorporating therapeutics. As both PGS and PEG are highly biocompatible, the PGS-co-PEG nanoparticles show high hemo-, immuno-, and cytocompatibility. Our data suggest that PGS-co-PEG nanoparticles have the potential for use in a wide range of biomedical applications including regenerative medicine, stem cell engineering, immune modulation, and cancer therapeutics. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2048-2058, 2018.
Collapse
|
4
|
Urethane-based low-temperature curing, highly-customized and multifunctional poly(glycerol sebacate)-co-poly(ethylene glycol) copolymers. Acta Biomater 2018; 71:279-292. [PMID: 29549052 DOI: 10.1016/j.actbio.2018.03.011] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2017] [Revised: 02/15/2018] [Accepted: 03/05/2018] [Indexed: 12/29/2022]
Abstract
Poly (glycerol sebacate) (PGS), a tough elastomer, has been widely explored in tissue engineering due to the desirable mechanical properties and biocompatibility. However, the complex curing procedure (high temperature and vacuum) and limited hydrophilicity (∼90° of wetting angle) greatly impede its functionalities. To address these challenges, a urethane-based low-temperature setting, PEGylated PGS bioelastomer was developed with and without solvent. By simultaneously tailoring PEG and hexamethylene diisocyanate (HDI) contents, the elastomers X-P-mUs (X referred to the PEG content and m referred to HDI content) with a broad ranging mechanical properties and customized hydrophilicity were constructed. The X-P-mUs synthesized exhibited adjustable tensile Young's modulus, ultimate tensile strength and elongation at break in the range of 1.0 MPa-14.2 MPa, 0.3 MPa-7.6 MPa and 53.6%-272.8%, with the water contact angle varying from 28.6° to 71.5°, respectively. Accordingly, these elastomers showed favorable biocompatibility in vitro and mild host response in vivo. Furthermore, the potential applications of X-P-mU elastomers prepared with solvent-base and solvent-free techniques in biomedical fields were investigated. The results showed that these X-P-mU elastomers with high molding capacity at mild temperature could be easily fabricated into various shapes, used as reinforcement for fragile materials, and controllable delivery of drugs and proteins with excellent bioactivity, demonstrating that the X-P-mU elastomers could be tailored as potential building blocks for diverse applications in biomedical research. STATEMENT OF SIGNIFICANCE Poly(glycerol sebacate) (PGS), a tough biodegradable elastomer, has received great attentions in biomedical field. But the complex curing procedure and limited hydrophilicity greatly hamper its functionality. Herein, a urethane-based low-temperature setting, PEGylated PGS (PEGS-U) bioelastomer with highly-customized mechanical properties, hydrophilicity and biodegradability was first explored. The synthesized PEGS-U showed favorable biocompatibility both in vitro and in vivo. Furthermore, the PEGS-U elastomer could be easily fabricated into various shapes, used as reinforcement for fragile materials, and controllable delivery of drugs and proteins with excellent bioactivity. This versatile, user-tunable bioelastomers should be a promising biomaterials for biomedical applications.
Collapse
|
5
|
Fabrication of poly(glycerol sebacate) fibrous membranes by coaxial electrospinning: Influence of shell and core solutions. J Mech Behav Biomed Mater 2016; 63:220-231. [PMID: 27429071 DOI: 10.1016/j.jmbbm.2016.06.022] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/29/2016] [Revised: 06/21/2016] [Accepted: 06/26/2016] [Indexed: 01/24/2023]
Abstract
Although poly(glycerol sebacate) (PGS) has enjoyed great success in soft tissue engineering, it remains challenging to fabricate PGS fibers. In this study, coaxial electrospinning, in which polylactide (PLA) was used to confine and draw PGS prepolymer, was used to fabricate PGS fibrous membranes. Specifically, effects of adding poly(ethylene oxide) (PEO), which was removed prior to curing, in the shell were investigated. Transmission and scanning electron microscopy were used to confirm core-shell structure and morphology of fibers, respectively. Both the removal of PEO or PLA in the shell and the efficacy of PGS curing were verified by Fourier transform infrared spectroscopy and differential scanning calorimetry. Mechanical properties of the membranes with different shell and core contents were examined. We found that the addition of PEO to the shell reduced Young׳s modulus of the resulting cured membrane and increased its elongation at break significantly, the latter indicating better PGS curing. Moreover, with the addition of PEO, increasing PGS prepolymer concentration further increased the elongation at break and appeared to enhance the structural integrity of fibers; PGS fibrous membranes (with no PLA shell) were thus successfully fabricated after the removal of PLA. The Young׳s modulus of the PGS fibrous membrane was ~0.47MPa, which is similar to that of PGS solid sheets and some soft tissues. Finally, the cytocompatibility of the electrospun membranes was validated by Alamar blue and LDH assays.
Collapse
|
6
|
Thermo-kinetics of lipase-catalyzed synthesis of 6-O-glucosyldecanoate. BIORESOURCE TECHNOLOGY 2011; 102:8727-8732. [PMID: 21816608 DOI: 10.1016/j.biortech.2011.07.024] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2011] [Revised: 07/11/2011] [Accepted: 07/11/2011] [Indexed: 05/31/2023]
Abstract
Lipase-catalyzed synthesis of 6-O-glucosyldecanoate from d-glucose and decanoic acid was performed in dimethyl sulfoxide (DMSO), a mixture of DMSO and tert-butanol and tert-butanol alone with a decreasing order of polarity. The highest conversion yield (> 65%) of decanoic acid was obtained in the blended solvent of intermediate polarity mainly because it could dissolve relatively large amounts of both the reactants. The reaction obeyed Michaelis-Menten type of kinetics. The affinity of the enzyme towards the limiting substrate (decanoic acid) was not affected by the polarity of the solvent, but increased significantly with temperature. The esterification reaction was endothermic with activation energy in the range of 60-67 kJ mol⁻¹. Based on the Gibbs energy values, in the solvent blend of DMSO and tert-butanol the position of the equilibrium was shifted more towards the products compared to the position in pure solvents. Monoester of glucose was the main product of the reaction.
Collapse
|
7
|
Botcinolide/botcinin: asymmetric synthesis of the key fragments. Nat Prod Commun 2011; 6:443-450. [PMID: 21560756] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/30/2023] Open
Abstract
The asymmetric synthesis of key fragments of the phytotoxic toxins botcinolide/botcinin is reported. The synthesis of 1 and 1a are based on a convergent route via esterification and alkene metathesis of fragments A, B or C, B, which were obtained by Evans aldol condensation and stereoselective crotylation, respectively.
Collapse
|
8
|
Abstract
Polymer scaffolds that direct elongation and orientation of cultured cells can enable tissue engineered muscle to act as a mechanically functional unit. We combined micromolding and microablation technologies to create muscle tissue engineering scaffolds from the biodegradable elastomer poly(glycerol sebacate). These scaffolds exhibited well defined surface patterns and pores and robust elastomeric tensile mechanical properties. Cultured C2C12 muscle cells penetrated the pores to form spatially controlled engineered tissues. Scanning electron and confocal microscopy revealed muscle cell orientation in a preferential direction, parallel to micromolded gratings and long axes of microablated anisotropic pores, with significant individual and interactive effects of gratings and pore design.
Collapse
|
9
|
Characterisation of a soft elastomer poly(glycerol sebacate) designed to match the mechanical properties of myocardial tissue. Biomaterials 2008; 29:47-57. [PMID: 17915309 DOI: 10.1016/j.biomaterials.2007.09.010] [Citation(s) in RCA: 342] [Impact Index Per Article: 21.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2007] [Accepted: 09/06/2007] [Indexed: 11/17/2022]
Abstract
The myocardial tissue lacks significant intrinsic regenerative capability to replace the lost cells. Therefore, the heart is a major target of research within the field of tissue engineering, which aims to replace infarcted myocardium and enhance cardiac function. The primary objective of this work was to develop a biocompatible, degradable and superelastic heart patch from poly(glycerol sebacate) (PGS). PGS was synthesised at 110, 120 and 130 degrees C by polycondensation of glycerol and sebacic acid with a mole ratio of 1:1. The investigation was focused on the mechanical and biodegrading behaviours of the developed PGS. PGS materials synthesised at 110, 120 and 130 degrees C have Young's moduli of 0.056, 0.22 and 1.2 MPa, respectively, which satisfy the mechanical requirements on the materials applied for the heart patch and 3D myocardial tissue engineering construction. Degradation assessment in phosphate buffered saline and Knockout DMEM culture medium has demonstrated that the PGS has a wide range of degradability, from being degradable in a couple of weeks to being nearly inert. The matching of physical characteristics to those of the heart, the ability to fine tune degradation rates in biologically relevant media and initial data showing biocompatibility indicate that this material has promise for cardiac tissue engineering applications.
Collapse
|
10
|
Synthesis and amphiphilic properties of decanoyl esters of tri- and tetraethylene glycol. J Colloid Interface Sci 2007; 312:397-404. [PMID: 17451732 DOI: 10.1016/j.jcis.2007.03.042] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2006] [Revised: 03/09/2007] [Accepted: 03/11/2007] [Indexed: 11/22/2022]
Abstract
Well-defined decanoyl triethylene glycol ester and decanoyl tetraethylene glycol ester were synthesized and compared to their ether counterparts (C(10)E(4) and C(10)E(3)). Their physicochemical properties i.e. critical micelle concentrations (CMC), cloud points, and equilibrium surface tensions were determined. Binary water-surfactant phase behavior was also studied by polarized optical microscopy. The stability of the ester bond was determined by investigating alkaline hydrolysis of the compounds. It was found that CMC, cloud point and equilibrium surface tension are roughly the same for corresponding ethers and esters. In the binary diagram, the esters form only lamellar phases, the area of which is smaller than that of the ether counterparts. These different behaviors can be related to the modification of the molecular conformation induced by the replacement of the ether group by the ester group.
Collapse
|
11
|
Abstract
[Structure: see text] The total synthesis of pseudo 2-epibotcinolide (1b) through several featured synthetic approaches has been attained. First, the chiral linear precursors of the nine-membered ring compound is stereoselectively constructed by the asymmetric aldol reaction for producing beta-hydroxy ester units. Second, the key cyclization reaction to form the nine-membered lactone moiety is efficiently achieved by the extremely facile and powerful mixed-anhydride method promoted by 2-methyl-6-nitrobenzoic anhydride (MNBA) with basic promoters.
Collapse
|
12
|
Phase behavior and rheological properties of enzymatically synthesized trehalose decanoate aqueous solutions. J Colloid Interface Sci 2006; 294:187-93. [PMID: 16125719 DOI: 10.1016/j.jcis.2005.07.019] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2005] [Revised: 07/11/2005] [Accepted: 07/11/2005] [Indexed: 10/25/2022]
Abstract
Surface tension properties of an enzymatically synthesized equimolar mixture of trehalose mono- and didecanoate in aqueous solutions have been determined. At 20 degrees C a critical micellar concentration (CMC) of 50 micromol/l and a minimal surface tension of 28 mN/m have been obtained. Above the CMC, it has been shown that up to a concentration of 42 wt%, and in a 20-60 degrees C temperature range the sugar ester aqueous solutions do not form any crystalline structure, nor present any phase transition, and the trehalose decanoate molecules form an isotropic worm-like micellar phase. The rheological properties indicate however a more complicated picture in the same concentration and temperature ranges. In steady shear, the viscosity of the trehalose decanoate solutions do not exhibit any shear rate dependence from 1 to 100 s(-1) for concentrations up to 42 wt%. Below 0.8 wt%, the viscosity remains constant and close to that of water; then, between 0.8 and 23 wt%, the viscosity shows a quadratic increase with surfactant concentration. For higher concentrations, up to 42 wt%, no further significant increase in viscosity is observed. In oscillatory shear experiments, the solutions exhibit viscoelastic properties. The observed rheological behavior as a function of concentration and temperature may be due to a progressive evolution of the trehalose decanoate molecular associations: as the concentration increases, the system evolves towards an entangled and/or partially branched or cross-linked micellar network, and eventually a multiconnected network of cross-linked micelles.
Collapse
|
13
|
The Formation Of Glycerol Monodecanoate By A Dehydration Condensation Reaction: Increasing The Chemical Complexity Of Amphiphiles On The Early Earth. ORIGINS LIFE EVOL B 2005; 35:323-32. [PMID: 16228646 DOI: 10.1007/s11084-005-2046-8] [Citation(s) in RCA: 29] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2004] [Accepted: 07/12/2004] [Indexed: 10/25/2022]
Abstract
Dehydration/condensation reactions between organic molecules in the prebiotic environment increased the inventory and complexity of organic compounds available for self-assembly into primitive cellular organisms. As a model of such reactions and to demonstrate this principle, we have investigated the esterification reaction between glycerol and decanoic acid that forms glycerol monodecanoate (GMD). This amphiphile enhances robustness of self-assembled membranous structures of carboxylic acids to the potentially disruptive effects of pH, divalent cation binding and osmotic stress. Experimental variables included temperature, water activity and hydrolysis of the resulting ester product, providing insights into the environmental conditions that would favor the formation and stability of this more evolved amphiphile. At temperatures exceeding 50 degrees C, the ester product formed even in the presence of bulk water, suggesting that the reaction occurs at the liquid interface of the two reactants and that the products segregate in the two immiscible layers, thereby reducing hydrolytic back reactions. This implies that esterification reactions were likely to be common in the prebiotic environment as reactants underwent cycles of wetting and drying on rare early landmasses at elevated temperatures.
Collapse
|
14
|
Abstract
Biodegradable polymers have significant potential in biotechnology and bioengineering. However, for some applications, they are limited by their inferior mechanical properties and unsatisfactory compatibility with cells and tissues. A strong, biodegradable, and biocompatible elastomer could be useful for fields such as tissue engineering, drug delivery, and in vivo sensing. We designed, synthesized, and characterized a tough biodegradable elastomer from biocompatible monomers. This elastomer forms a covalently crosslinked, three-dimensional network of random coils with hydroxyl groups attached to its backbone. Both crosslinking and the hydrogen-bonding interactions between the hydroxyl groups likely contribute to the unique properties of the elastomer. In vitro and in vivo studies show that the polymer has good biocompatibility. Polymer implants under animal skin are absorbed completely within 60 days with restoration of the implantation sites to their normal architecture.
Collapse
|
15
|
New syntheses of the rice moth and stink bug pheromones by employing (2R, 6S)-7-acetoxy-2,6-dimethyl-1-heptanol as a building block. Biosci Biotechnol Biochem 2000; 64:1713-21. [PMID: 10993161 DOI: 10.1271/bbb.64.1713] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
(2R, 6R, 10R)-6,10,14-Trimethyl-2-pentadecanol, the female pheromone of the rice moth (Corcyra cephalonica), methyl (2R, 6R, 10R)-2,6,10-trimethyltridecanoate, the male pheromone of the stink bug (Euschistus heros) were synthesized by employing (2R, 6S)-7-acetoxy-2,6-dimethyl-1-heptanol as the common chiral building block.
Collapse
|
16
|
12-O-acetylphorbol-13-decanoate potently inhibits cytopathic effects of human immunodeficiency virus type 1 (HIV-1), without activation of protein kinase C. Chem Pharm Bull (Tokyo) 1999; 47:1346-7. [PMID: 10517016 DOI: 10.1248/cpb.47.1346] [Citation(s) in RCA: 15] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Through bioactivity-guided fractionation, eight phorbol diesters, including five new ones (1-5), were isolated from the seeds of Croton tiglium collected in Egypt. 12-O-Acetylphorbol-13-decanoate (6) and 12-O-decanoylphorbol-13-(2-methylbutyrate) (4) potently inhibited the HIV-1-induced cytopathic effect on MT-4 cells (IC100 values of 7.6 ng/ml and 7.81 micrograms/ml, and CC0 values of 62.5 micrograms/ml and 31.3 micrograms/ml, respectively) without activating protein kinase C.
Collapse
|
17
|
Sustained decrease in cocaine-maintained responding in rhesus monkeys with 1-[2-[bis(4-fluorophenyl)methoxy]ethyl]-4-(3-hydroxy-3-phenylpropyl) piperazinyl decanoate, a long-acting ester derivative of GBR 12909. J Med Chem 1996; 39:4689-91. [PMID: 8941381 DOI: 10.1021/jm960551t] [Citation(s) in RCA: 59] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
|