1
|
Study of Titanium-Silver Monolayer and Multilayer Films for Protective Applications in Biomedical Devices. Molecules 2021; 26:4813. [PMID: 34443400 PMCID: PMC8399690 DOI: 10.3390/molecules26164813] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2021] [Revised: 08/02/2021] [Accepted: 08/03/2021] [Indexed: 11/25/2022] Open
Abstract
The search for coatings that extend the useful life of biomedical devices has been of great interest, and titanium has been of great relevance due to its innocuousness and low reactivity. This study contributes to the investigation of Ti/Ag films in different configurations (monolayer and multilayer) deposited by magnetron sputtering. The sessile droplet technique was applied to study wettability; greater film penetrability was obtained when Ag is the external layer, conferring high efficiency in cell adhesion. The morphological properties were characterized by SEM, which showed porous nuclei on the surface in the Ag coating and crystals embedded in the Ti film. The structural properties were studied by XRD, revealing the presence of TiO2 in the anatase crystalline phase in a proportion of 49.9% and the formation of a silver cubic network centered on the faces. Tafel polarization curves demonstrated improvements in the corrosion current densities of Ag/Ti/Ag/Ti/Ag/Ti/Ag/Ti and Ti/Ag compared to the Ag coating, with values of 0.1749, 0.4802, and 2.044 nA.m-2, respectively. Antimicrobial activity was evaluated against the bacteria Pseudomonas aeruginosa and Bacillus subtilis and the yeasts Candida krusei and Candida albicans, revealing that the Ti/Ag and Ag/Ti/Ag/Ti/Ag/Ti/Ag/Ti coatings exhibit promise in biomedical material applications.
Collapse
|
2
|
Stable Fabrication of Zwitterionic Coating Based on Copper-Phenolic Networks on Contact Lens with Improved Surface Wettability and Broad-Spectrum Antimicrobial Activity. ACS APPLIED MATERIALS & INTERFACES 2020; 12:16125-16136. [PMID: 32202402 DOI: 10.1021/acsami.0c02143] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Ocular dryness and contact lens(CL)-related microbial keratitis (MK) are two major risks of wearing CLs. The development of multifunctional surface coating for CLs with excellent hydrating and antimicrobial properties is a practical strategy to improve the comfort of CL wearers and to prevent corneal infection. Here, we develop zwitterionic and antimicrobial metal-phenolic networks (MPNs) based on the coordination of copper ions (CuII) and the poly(carboxylbetaine-co-dopamine methacrylamide) copolymer (PCBDA), which can be easily one-step prepared onto CLs due to the near-universal adherent properties of catechol groups. The zwitterionic and antifouling carboxybetaine (CB) groups of the CuII-PCBDA coating can significantly increase the wettability of CLs and reduce their protein adsorptions, resulting in a lens surface that is more water retentive and with lower protein binding to prevent tear film evaporation and eye dryness. In addition, since the immobilized copper ions in the MPNs impart them with ion-mediated antimicrobial activity, the CuII-PCBDA coating exhibits a strong and broad-spectrum antimicrobial activity against MK related pathogenic microbes, including bacteria, such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus, and fungi, such as Candida albicans. Compared with a pristine CL, the CuII-PCBDA-coated CL effectively inhibited biofilm formation even after daily exposure to the above microbial environment for 14 days. Notably, the CuII-PCBDA coating developed in this study is not only biocompatible with 100% cell viability following direct contact with human corneal epithelial cells (HCECs) for 48 h but also maintains the optical clarity of the native CLs. Thus, the CuII-PCBDA coating has a great application potential for the development of a multifunctional surface coating for CLs for increased CL comfort and prevention of MK.
Collapse
|
3
|
Fabrication and characterization of one high-hygroscopicity liquid starch-based mulching materials for facilitating the growth of plant. Carbohydr Polym 2020; 230:115582. [PMID: 31887860 DOI: 10.1016/j.carbpol.2019.115582] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2019] [Revised: 11/04/2019] [Accepted: 11/06/2019] [Indexed: 11/18/2022]
Abstract
One high-performance liquid starch-based mulching materials (LSMM) was successfully fabricated by grafting polyacrylic acid (PAA) onto starch then crosslinking with N,N'-methylene-bisacrylamide (MBA). The effects of the dosage of acrylic acid on the performances of LSMM film had been explored. The LSMM was characterized by FTIR, solid state 13C NMR, XRD and SEM. Their application performances by spraying the LSMM on the soil surface also had been discussed. The PAA grafted onto starch significantly improved the properties of LSMM film (tensile strength 20.89 MPa, elongation at break 59.19 %, water absorbency 68.58 g/g and solubility in water 4.5 %). The PAA broke the hydrogen bonds and reduced the crystallinity of starch molecule, which can form the compact structure in LSSM film. As a result, the LSMM showed excellent relative hygroscopicity, water retention, degradability (weight loss 72.61 %) and the effect of facilitating the growth and germination ratio (84.00 %) of lettuce.
Collapse
|
4
|
The use of hydrophobic amino acids in protecting spray dried trehalose formulations against moisture-induced changes. Eur J Pharm Biopharm 2019; 144:139-153. [PMID: 31536784 DOI: 10.1016/j.ejpb.2019.09.014] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/31/2019] [Revised: 08/13/2019] [Accepted: 09/15/2019] [Indexed: 11/18/2022]
Abstract
Trehalose is commonly used as a protein stabilizer in spray dried protein formulations delivered via the pulmonary route. Spray dried trehalose formulations are highly hygroscopic, which makes them prone to deliquescence and recrystallization when exposed to moisture, leading to impairment in aerosolization performance. The main aim of this study was to investigate and compare the effect of hydrophobic amino acids (i.e. L-leucine and L-isoleucine) in enhancing aerosolization performance and in mitigating moisture-induced changes in spray dried trehalose formulations. Trehalose was spray dried with 20-60% w/w of amino acid (i.e. L-leucine or L-isoleucine). The spray dried formulations were stored at 25 °C/50% RH for 28 days. Solid state characterization and in vitro aerosolization performance studies were performed on the spray dried formulations before and after storage. The addition of 20-60% w/w of amino acid (i.e. L-leucine or L-isoleucine) improved the emitted fractions of spray dried trehalose formulations from a dry powder inhaler. However, ≥ 40% w/w of L-leucine/L-isoleucine was needed to prevent recrystallization of trehalose in the formulations when exposed to 25 °C/50% RH for 28 days. X-ray photoelectron spectroscopy (XPS) demonstrated that samples with 40-60% w/w L-isoleucine had more amino acid on the surfaces of the particles compared to their L-leucine counterparts. This may explain the greater ability of the L-isoleucine (40-60% w/w) samples to cope with elevated humidity compared to L-leucine samples of the same concentrations, as observed in the dynamic vapour sorption (DVS) studies. In conclusion, this study demonstrated that both L-leucine and L-isoleucine were effective in enhancing aerosolization performance and mitigating moisture-induced reduction in aerosolization performance in spray dried trehalose formulations. L-isoleucine proved to be superior to L-leucine in terms of its moisture protectant effect when incorporated at the same concentration in the formulations.
Collapse
|
5
|
The Effects of β-Lactam Antibiotics on Surface Modifications of Multidrug-Resistant Escherichia coli: A Multiscale Approach. MICROSCOPY AND MICROANALYSIS : THE OFFICIAL JOURNAL OF MICROSCOPY SOCIETY OF AMERICA, MICROBEAM ANALYSIS SOCIETY, MICROSCOPICAL SOCIETY OF CANADA 2019; 25:135-150. [PMID: 30869575 PMCID: PMC6599534 DOI: 10.1017/s1431927618015696] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
Possible multidrug-resistant (MDR) mechanisms of four resistant strains of Escherichia coli to a model β-lactam, ampicillin, were investigated using contact angle measurements of wettability, crystal violet assays of permeability, biofilm formation, fluorescence imaging, and nanoscale analyses of dimensions, adherence, and roughness. Upon exposure to ampicillin, one of the resistant strains, E. coli A5, changed its phenotype from elliptical to spherical, maintained its roughness and biofilm formation abilities, decreased its length and surface area, maintained its cell wall integrity, increased its hydrophobicity, and decreased its nanoscale adhesion to a model surface of silicon nitride. Such modifications are suggested to allow these cells to conserve energy during metabolic dormancy. In comparison, resistant strains E. coli D4, A9, and H5 elongated their cells, increased their roughness, increased their nanoscale adhesion forces, became more hydrophilic, and increased their biofilm formation upon exposure to ampicillin. These results suggest that these strains resisted ampicillin through biofilm formation that possibly introduces diffusion limitations to antibiotics. Investigations of how MDR bacterial cells modify their surfaces in response to antibiotics can guide research efforts aimed at designing more effective antibiotics and new treatment strategies for MDR bacterial infections.
Collapse
|
6
|
Synergistic effects of wheat straw powder and persulfate/Fe(II) on enhancing sludge dewaterability. CHEMOSPHERE 2019; 215:333-341. [PMID: 30326439 DOI: 10.1016/j.chemosphere.2018.10.008] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2018] [Revised: 08/21/2018] [Accepted: 10/03/2018] [Indexed: 06/08/2023]
Abstract
The effects of wheat straw powder (WSP) used as physical conditioner on sludge dewatering was investigated under sodium persulfate (SPS)/Fe(II) oxidation. Sludge dewatering performance in terms of capillary suction time (CST), specific resistance to filtration (SRF) and moisture content (MC) was enhanced with increasing WSP and SPS dosages. The results showed presence of synergistic effect in WSP and SPS conditioning system, with sludge CST and SRF reduced by 43.9% and 65.6%, respectively, after dosing 0.75 g/g DS (dry solid) WSP, 120 mg/g DS SPS and 33 mg/g DS Fe(II), indicating that sludge dewatering became more easily. Correspondingly, bound water was released and decreased from 5.75 g/g DS to 1.5 g/g DS and deep dewatered sludge MC reached to 58.2% under 2 MPa pressure. Mechanically, tightly bound extracellular polymeric substances (TB-EPS) with larger molecular weights were oxidized and degraded into loosely bound-EPS (LB-EPS) and soluble organic matter with smaller molecular weights by SPS/Fe(II). Additionally, the organic matters released from or still in WSP was also oxidized resulting in more channels and less fine particles.
Collapse
|
7
|
Facile and Versatile Modification of Cotton Fibers for Persistent Antibacterial Activity and Enhanced Hygroscopicity. ACS APPLIED MATERIALS & INTERFACES 2018; 10:38506-38516. [PMID: 30360113 DOI: 10.1021/acsami.8b14986] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Natural fibers with functionalities have attracted considerable attention. However, developing facile and versatile strategies to modify natural fibers is still a challenge. In this study, cotton fibers, the most widely used natural fibers, were partially oxidized by sodium periodate in aqueous solution, to give oxidized cotton fibers containing multiple aldehyde groups on their surface. Then poly(hexamethylene guanidine) was chemically grafted onto the oxidized cotton fibers forming Schiff bases between the terminal amines of poly(hexamethylene guanidine) and the aldehyde groups of oxidized cotton fibers. Finally, carbon-nitrogen double bonds were reduced by sodium cyanoborohydride, to bound poly(hexamethylene guanidine) covalently to the surface of cotton fibers. These functionalized fibers show strong and persistent antibacterial activity: complete inhibition against Escherichia coli and Staphylococcus aureus was maintained even after 1000 consecutive washing in distilled water. On the other hand, cotton fibers with only physically adsorbed poly(hexamethylene guanidine) lost their antibacterial activity entirely after a few washes. According to Cell Counting Kit-8 assay and hemolytic analysis, toxicity did not significantly increase after chemical modification. Attributing to the hydrophilicity of poly(hexamethylene guanidine) coatings, the modified cotton fibers were also more hygroscopic compared to untreated cotton fibers, which can improve the comfort of the fabrics made of modified cotton fibers. This study provides a facile and versatile strategy to prepare modified polysaccharide natural fibers with durable antibacterial activity, biosecurity, and comfortable touch.
Collapse
|
8
|
Titania nanotube arrays as interfaces for neural prostheses. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2015; 49:735-745. [PMID: 25687003 PMCID: PMC4331648 DOI: 10.1016/j.msec.2015.01.077] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2014] [Revised: 12/08/2014] [Accepted: 01/23/2015] [Indexed: 11/23/2022]
Abstract
Neural prostheses have become ever more acceptable treatments for many different types of neurological damage and disease. Here we investigate the use of two different morphologies of titania nanotube arrays as interfaces to advance the longevity and effectiveness of these prostheses. The nanotube arrays were characterized for their nanotopography, crystallinity, conductivity, wettability, surface mechanical properties and adsorption of key proteins: fibrinogen, albumin and laminin. The loosely packed nanotube arrays fabricated using a diethylene glycol based electrolyte, contained a higher presence of the anatase crystal phase and were subsequently more conductive. These arrays yielded surfaces with higher wettability and lower modulus than the densely packed nanotube arrays fabricated using water based electrolyte. Further the adhesion, proliferation and differentiation of the C17.2 neural stem cell line was investigated on the nanotube arrays. The proliferation ratio of the cells as well as the level of neuronal differentiation was seen to increase on the loosely packed arrays. The results indicate that loosely packed nanotube arrays similar to the ones produced here with a DEG based electrolyte, may provide a favorable template for growth and maintenance of C17.2 neural stem cell line.
Collapse
|
9
|
In vitro investigation of the effect of plasticizers on the blood compatibility of medical grade plasticized poly (vinyl chloride). JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2013; 24:1985-1992. [PMID: 23686353 DOI: 10.1007/s10856-013-4950-1] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2013] [Accepted: 04/30/2013] [Indexed: 06/02/2023]
Abstract
This paper reports the results of an in vitro investigation into the blood response of medical grade poly (vinyl chloride) (PVC), and two types of plasticized PVC in tubing or sheet form, with di-(2-ethylhexyl)phthalate (DEHP) and di(isononyl) cyclohexane-1,2-dicarboxylate (HEXAMOLL(®) DINCH) as plasticizer, were selected for assessment of complement activation, coagulation system and platelet activation. The results of the study show that not only the plasticizers at PVC surface have an influence on complement activation, but also the incubation condition such as incubation time and the diameter of PVC tubing. Under static status, C3a, C5a and SC5b-9 concentration in the blood were higher after contacting with PVC plasticized with DEHP (PVC1) than after contacting with PVC plasticized with DINCH (PVC2). However, under dynamic circulation, the results were totally converse, which may be due to smaller diameter and higher shear rate of PVC2. In addition, there was a significant increase of activated partial thrombin time (APTT) and decrease of FIX concentration after plasma contacting with the PVC tubing, which indicated that the intrinsic pathway may be impacted when blood contacted with PVC tubing. However, there was no significant difference of APTT, FIX concentration and CD62p expression rate between the two materials. Moreover, the migration in the DINCH system was considerably lower than for DEHP, which indicates that DINCH could be a promising alterative plasticizer of DEHP.
Collapse
|
10
|
Influences of textured substrates on the heart rate of developing zebrafish embryos. NANOTECHNOLOGY 2013; 24:265101. [PMID: 23733204 DOI: 10.1088/0957-4484/24/26/265101] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
Identification of the effects of different textured substrates on zebrafish (Danio rerio) embryos provides insights into the influence of external stimuli on normal cardiovascular functions in the developmental stages of the embryos. This knowledge can be used in numerous genetic studies using zebrafish as an animal model as well as in bioanalytical assays using digital microfluidics. In this study, zebrafish embryos were systematically positioned and in vivo imaged on four types of silicon substrates. These substrates exhibited surface textures and surface wettability that were well modulated by wet chemical etching. The heart rate of the developing embryos significantly increased by 9.1% upon exposure to textured Si substrates with nanostructured surfaces compared with bare Si substrates. Modulation of surface wettability in the tested substrates also responded to the increase in the heart rate of the embryo; however, the effect of surface wettability on heart rate was slight compared with the effect of texture. In-depth experimental and statistical investigations of heart rate under the effects of substrate textures imply a pathway through which the inner mass of the embryo reacts to external stimuli. These findings contribute to zebrafish-related studies and suggest other factors to consider in the design of nanostructure-based microfluidics and other biomedical devices.
Collapse
|
11
|
Separation and characterization of effective demulsifying substances from surface of Alcaligenes sp. S-XJ-1 and its application in water-in-kerosene emulsion. BIORESOURCE TECHNOLOGY 2013; 139:257-264. [PMID: 23665685 DOI: 10.1016/j.biortech.2013.04.043] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2013] [Revised: 04/11/2013] [Accepted: 04/11/2013] [Indexed: 06/02/2023]
Abstract
The main goal of this work was to analyze the effect of surface substances on demulsifying capability of the demulsifying strain Alcaligenes sp. S-XJ-1. The demulsifying substances were successfully separated from the cell surface with dichloromethane-alkali treatment, and exhibited 67.5% of the demulsification ratio for water-in-kerosene emulsions at a dosage of 356mg/L. FT-IR, TLC and ESI-MS analysis confirmed the presence of a carbohydrate-protein-lipid complex in the demulsifying substances with the major molecular ions from mass-to-charge ratio (m/z) 165 to 814. After the substances separated, the cell morphology changed from aggregated to dispersed, and the concentration of cell surface functional groups decreased. Cell surface hydrophobicity and the ability of cell adhesion to hydrophobic surface of the treated cells was also reduced compared with original cell. It was proved that the demulsifying substances had a significant effect on cell surface properties and accordingly with demulsifying capability of Alcaligenes sp. S-XJ-1.
Collapse
|
12
|
Bioelectronics meets nanomedicine for cardiovascular implants: PEDOT-based nanocoatings for tissue regeneration. Biochim Biophys Acta Gen Subj 2013; 1830:4294-304. [PMID: 23291427 DOI: 10.1016/j.bbagen.2012.12.019] [Citation(s) in RCA: 46] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2012] [Revised: 12/13/2012] [Accepted: 12/18/2012] [Indexed: 11/17/2022]
Abstract
BACKGROUND An exciting direction in nanomedicine would be to analyze how living cells respond to conducting polymers. Their application for tissue regeneration may advance the performance of drug eluting stents by addressing the delayed stent re-endothelialization and late stent thrombosis. METHODS The suitability of poly (3, 4-ethylenedioxythiophene) (PEDOT) thin films for stents to promote cell adhesion and proliferation is tested in correlation with doping and physicochemical properties. PEDOT doped either with poly (styrenesulfonate) (PSS) or tosylate anion (TOS) was used for films' fabrication by spin coating and vapor phase polymerization respectively. PEGylation of PEDOT: TOS for reduced immunogenicity and biofunctionalization of PEDOT: PSS with RGD peptides for induced cell proliferation was further applied. Atomic Force Microscopy and Spectroscopic Ellipsometry were implemented for nanotopographical, structural, optical and conductivity measurements in parallel with wettability and protein adsorption studies. Direct and extract testing of cell viability and proliferation of L929 fibroblasts on PEDOT samples by MTT assay in line with SEM studies follow. RESULTS All PEDOT thin films are cytocompatible and promote human serum albumin adsorption. PEDOT:TOS films were found superior regarding cell adhesion as compared to controls. Their nanotopography and hydrophilicity are significant factors that influence cytocompatibility. PEGylation of PEDOT:TOS increases their conductivity and hydrophilicity with similar results on cell viability with bare PEDOT:TOS. The biofunctionalized PEDOT:PSS thin films show enhanced cell proliferation. CONCLUSIONS The application of PEDOT polymers has evolved as a new perspective to advance stents. GENERAL SIGNIFICANCE In this work, nanomedicine involving nanotools and novel nanomaterials merges with bioelectronics to stimulate tissue regeneration for cardiovascular implants. This article is part of a Special Issue entitled Organic Bioelectronics - Novel Applications in Biomedicine.
Collapse
|
13
|
The responses to surface wettability gradients induced by chitosan nanofilms on microtextured titanium mediated by specific integrin receptors. Biomaterials 2012; 33:7386-93. [PMID: 22835642 PMCID: PMC3781581 DOI: 10.1016/j.biomaterials.2012.06.066] [Citation(s) in RCA: 70] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/08/2012] [Accepted: 06/25/2012] [Indexed: 12/19/2022]
Abstract
Microtexture and chemistry of implant surfaces are important variables for modulating cellular responses. Surface chemistry and wettability are connected directly. While each of these surface properties can influence cell response, it is difficult to decouple their specific contributions. To address this problem, the aims of this study were to develop a surface wettability gradient with a specific chemistry without altering micron scale roughness and to investigate the role of surface wettability on osteoblast response. Microtextured sandblasted/acid-etched (SLA, Sa = 3.1 μm) titanium disks were treated with oxygen plasma to increase reactive oxygen density on the surface. At 0, 2, 6, 10, and 24 h after removing them from the plasma, the surfaces were coated with chitosan for 30 min, rinsed and dried. Modified SLA surfaces are denoted as SLA/h in air prior to coating. Surface characterization demonstrated that this process yielded differing wettability (SLA0 < SLA2 < SLA10 < SLA24) without modifying the micron scale features of the surface. Cell number was reduced in a wettability-dependent manner, except for the most water-wettable surface, SLA24. There was no difference in alkaline phosphatase activity with differing wettability. Increased wettability yielded increased osteocalcin and osteoprotegerin production, except on the SLA24 surfaces. mRNA for integrins α1, α2, α5, β1, and β3 was sensitive to surface wettability. However, surface wettability did not affect mRNA levels for integrin α3. Silencing β1 increased cell number with reduced osteocalcin and osteoprotegerin in a wettability-dependent manner. Surface wettability as a primary regulator enhanced osteoblast differentiation, but integrin expression and silencing β1 results indicate that surface wettability regulates osteoblast through differential integrin expression profiles than microtexture does. The results may indicate that both microtexture and wettability with a specific chemistry have important regulatory effects on osseointegration. Each property had different effects, which were mediated by different integrin receptors.
Collapse
|
14
|
Biointerface: protein enhanced stem cells binding to implant surface. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2012; 23:2203-15. [PMID: 22714559 DOI: 10.1007/s10856-012-4687-2] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/20/2011] [Accepted: 05/21/2012] [Indexed: 05/23/2023]
Abstract
The number of metallic implantable devices placed every year is estimated at 3.7 million. This number has been steadily increasing over last decades at a rate of around 8 %. In spite of the many successes of the devices the implantation of biomaterial into tissues almost universally leads to the development of an avascular sac, which consists of fibrous tissue around the device and walls off the implant from the body. This reaction can be detrimental to the function of implant, reduces its lifetime, and necessitates repeated surgery. Clearly, to reduce the number of revision surgeries and improve long-term implant function it is necessary to enhance device integration by modulating cell adhesion and function. In this paper we have demonstrated that it is possible to enhance stem cell attachment using engineered biointerfaces. To create this functional interface, samples were coated with polymer (as a precursor) and then ion implanted to create a reactive interface that aids the binding of biomolecules--fibronectin. Both AFM and XPS analyses confirmed the presence of protein layers on the samples. The amount of protein was significant greater for the ion implanted surfaces and was not disrupted upon washing with detergent, hence the formation of strong bonds with the interface was confirmed. While, for non ion implanted surfaces, a decrease of protein was observed after washing with detergent. Finally, the number of stem cells attached to the surface was enhanced for ion implanted surfaces. The studies presented confirm that the developed bionterface with immobilised fibronectin is an effective means to modulate stem cell attachment.
Collapse
|
15
|
"Wetting enhancer" pullulan coating for antifog packaging applications. ACS APPLIED MATERIALS & INTERFACES 2012; 4:3692-700. [PMID: 22758352 DOI: 10.1021/am300784n] [Citation(s) in RCA: 44] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
A new antifog coating made of pullulan is described in this work. The antifog properties are discussed in terms of wettability, surface chemistry/morphology, and by quantitative assessment of the optical properties (haze and transparency) before and after fog formation. The work also presents the results of antifog tests simulating the typical storage conditions of fresh foods. In these tests, the antifog efficiency of the pullulan coating was compared with that of two commercial antifog films, whereas an untreated low-density polyethylene (LDPE) film was used as a reference. The obtained results revealed that the pullulan coating behaved as a "wetting enhancer", mainly due to the low water contact angle (∼24°), which in turn can be ascribed to the inherent hydrophilic nature of this polysaccharide, as also suggested by the X-ray photoelectron spectroscopy experiments. Unlike the case of untreated LDPE and commercial antifog samples, no discrete water formations (i.e., droplets or stains) were observed on the antifog pullulan coating on refrigeration during testing. Rather, an invisible, continuous and thin layer of water occurred on the biopolymer surface, which was the reason for the unaltered haze and increased transparency, with the layer of water possibly behaving as an antireflection layer. As confirmed by atomic force microscopy analysis, the even deposition of the coating on the plastic substrate compared to the patchy surfacing of the antifog additives in the commercial films is another important factor dictating the best performance of the antifog pullulan coating.
Collapse
|
16
|
Modular polymer design to regulate phenotype and oxidative response of human coronary artery cells for potential stent coating applications. Acta Biomater 2012; 8:559-69. [PMID: 22019760 DOI: 10.1016/j.actbio.2011.10.003] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2011] [Revised: 09/28/2011] [Accepted: 10/03/2011] [Indexed: 02/05/2023]
Abstract
Polymer properties can be tailored by copolymerizing subunits with specific physico-chemical characteristics. Vascular stent materials require biocompatibility, mechanical strength, and prevention of restenosis. Here we copolymerized poly(ε-caprolactone) (PCL), poly(ethylene glycol) (PEG), and carboxyl-PCL (cPCL) at varying molar ratios and characterized the resulting material properties. We then performed a short-term evaluation of these polymers for their applicability as potential coronary stent coating materials with two primary human coronary artery cell types: smooth muscle cells (HCASMC) and endothelial cells (HCAEC). Changes in proliferation and phenotype were dependent upon intracellular reactive oxygen species (ROS) levels, and 4%PEG-96%PCL-0%cPCL was identified as the most appropriate coating material for this application. After 3days on this substrate HCASMC maintained a healthy contractile phenotype and HCAEC exhibited a physiologically relevant proliferation rate and a balanced redox state. Other test substrates promoted a pathological, synthetic phenotype of HCASMC and/or hyperproliferation of HCAEC. Phenotypic changes of HCASMC appeared to be modulated by the Young's modulus and surface charge of the test substrates, indicating a structure-function relationship that can be exploited for intricate control over vascular cell functions. These data indicate that tailored copolymer properties can direct vascular cell behavior and provide insights for further development of biologically instructive stent coating materials.
Collapse
|
17
|
Plasma treatment induced wetting transitions on biological tissue (pigeon feathers). Colloids Surf B Biointerfaces 2011; 92:367-71. [PMID: 22221456 DOI: 10.1016/j.colsurfb.2011.11.053] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/25/2011] [Revised: 11/25/2011] [Accepted: 11/29/2011] [Indexed: 11/17/2022]
Abstract
We report first the wetting transition from superhydrophobicity to superhydrophilicity observed on nitrogen and air plasma irradiated biological tissue (pigeon feathers). Non-irradiated feathers demonstrate pronounced Cassie-Baxter ("fakir") wetting characterized by high apparent contact angles and low sliding angles. Plasma-irradiated feathers are superhydrophilic. Plasma treatment does not affect the barbs/barbules keratin-built network constituting pigeon pennae, but it changes the Young, advancing and receding angles of the tissue. The mechanism of wetting transition is discussed.
Collapse
|
18
|
The impact of recombinant fusion-hydrophobin coated surfaces on E. coli and natural mixed culture biofilm formation. BIOFOULING 2011; 27:1073-1085. [PMID: 22047093 DOI: 10.1080/08927014.2011.631168] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
The impact of increased surface hydrophobicity on biofilms regarding retardation, repulsion, or attraction was studied with hydrophobin modified glass substrata. Recombinantly produced fungal hydrophobins forming self-assembled monolayers were used as the surface coating. The adsorption dynamics of hydrophobins were analysed with a quartz crystal microbalance which showed the surface coating to be rapid and stable. The change of surface wettability was determined by water contact angle measurements and demonstrated an increase in hydrophobicity in range of 60-62°. The homogeneity of the monolayers was demonstrated by immunofluorescence microscopy. Atomic force microscopy was applied to visualise the uniform texture of the coated materials. The hydrophobin coatings had no impact on different biofilms in terms of spatial distribution, cell numbers, and population composition. In consequence, hydrophobicity might not represent an important parameter for biofilm formation. Nevertheless, recombinant hydrophobins are suitable for large scale surface modification and functionalization with bioactive molecules.
Collapse
|
19
|
Osteoinduction of human mesenchymal stem cells by bioactive composite scaffolds without supplemental osteogenic growth factors. PLoS One 2011; 6:e26211. [PMID: 22022571 PMCID: PMC3192176 DOI: 10.1371/journal.pone.0026211] [Citation(s) in RCA: 139] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2011] [Accepted: 09/22/2011] [Indexed: 01/16/2023] Open
Abstract
The development of a new family of implantable bioinspired materials is a focal point of bone tissue engineering. Implant surfaces that better mimic the natural bone extracellular matrix, a naturally nano-composite tissue, can stimulate stem cell differentiation towards osteogenic lineages in the absence of specific chemical treatments. Herein we describe a bioactive composite nanofibrous scaffold, composed of poly-caprolactone (PCL) and nano-sized hydroxyapatite (HA) or beta-tricalcium phosphate (TCP), which was able to support the growth of human bone marrow mesenchymal stem cells (hMSCs) and guide their osteogenic differentiation at the same time. Morphological and physical/chemical investigations were carried out by scanning, transmission electron microscopy, Fourier-transform infrared (FTIR) spectroscopy, mechanical and wettability analysis. Upon culturing hMSCs on composite nanofibers, we found that the incorporation of either HA or TCP into the PCL nanofibers did not affect cell viability, meanwhile the presence of the mineral phase increases the activity of alkaline phosphatase (ALP), an early marker of bone formation, and mRNA expression levels of osteoblast-related genes, such as the Runt-related transcription factor 2 (Runx-2) and bone sialoprotein (BSP), in total absence of osteogenic supplements. These results suggest that both the nanofibrous structure and the chemical composition of the scaffolds play a role in regulating the osteogenic differentiation of hMSCs.
Collapse
|
20
|
Effect of hydrophilicity of carbon nanotube arrays on the release rate and activity of recombinant human bone morphogenetic protein-2. NANOTECHNOLOGY 2011; 22:295712. [PMID: 21693800 DOI: 10.1088/0957-4484/22/29/295712] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
Novel nanostructures such as vertically aligned carbon nanotube (CNT) arrays have received increasing interest as drug delivery carriers. In the present study, two CNT arrays with extreme surface wettabilities are fabricated and their effects on the release of recombinant human bone morphogenetic protein-2 (rhBMP-2) are investigated. It is found that the superhydrophilic arrays retained a larger amount of rhBMP-2 than the superhydrophobic ones. Further use of a poloxamer diffusion layer delayed the initial burst and resulted in a greater total amount of rhBMP-2 released from both surfaces. In addition, rhBMP-2 bound to the superhydrophilic CNT arrays remained bioactive while they denatured on the superhydrophobic surfaces. These results are related to the combined effects of rhBMP-2 molecules interacting with poloxamer and the surface, which could be essential in the development of advanced carriers with tailored surface functionalities.
Collapse
|
21
|
Surface characteristics of acrylic modified polysulfone membranes improves renal proximal tubule cell adhesion and spreading. Acta Biomater 2011; 7:2060-9. [PMID: 21236368 DOI: 10.1016/j.actbio.2011.01.009] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2010] [Revised: 12/28/2010] [Accepted: 01/07/2011] [Indexed: 11/16/2022]
Abstract
Current polyvinylpyrrolidone-modified polysulfone (PVP-PSU) membranes in haemodialysers do not facilitate the attachment and proliferation of renal proximal tubule cells (RPTCs). For bioartificial kidney (BAK) development expensive extracellular matrices are employed to ensure the PVP-PSU membranes can serve as a substrate for RPTCs. In this study we modified PSU using an acrylic monomer (am-PSU) and polymerization using ultraviolet irradiation. We demonstrated that on adjusting the PSU or acrylic content of the membranes the wettability and surface chemistry were altered, and this affected the amount of fibronectin (Fn) that was adsorbed onto the membranes. Using an integrin blocking assay we ascertained that Fn is an important extracellular matrix component that mediates RPTC attachment. The amount of Fn adsorbed also led to different bioresponses of RPTCs, which were evaluated using attachment and proliferation assays and qualitative quantification of vinculin, focal adhesion kinase, zonula occludens and Na(+)/K(+) ATPase. Our optimized membrane, am-PSU1 (21.4% C-O groups, 19.1% PVP-PSU; contact angle 71.5-80.80, PVP-PSU: 52.4-67.50), supports a confluent monolayer of RPTCs and prevents creatinine and inulin diffusion from the apical to the basal side, meeting the requirements for application in BAKs. However, further in vivo evaluation to assess the full functionality of RPTCs on am-PSU1 is required.
Collapse
|
22
|
Responses of bone-forming cells on pre-immersed Zr-based bulk metallic glasses: Effects of composition and roughness. Acta Biomater 2011; 7:395-405. [PMID: 20709197 DOI: 10.1016/j.actbio.2010.08.002] [Citation(s) in RCA: 93] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2010] [Revised: 07/13/2010] [Accepted: 08/05/2010] [Indexed: 11/29/2022]
Abstract
Bulk metallic glasses (BMGs) demonstrate attractive properties for potential biomedical applications, owing to their amorphous structure. The present work has investigated the biocompatibility of Zr-based BMGs by studying the cellular behavior of bone-forming mouse MC3T3-E1 pre-osteoblast cells. A Ti-6Al-4V alloy was used as a reference material. Pre-immersion treatment was performed on BMG samples in phosphate-buffered saline prior to cell experiments. The effects of 1at.% yttrium alloying and surface roughness on cellular behavior were examined. The general biosafety of Zr-based BMGs for MC3T3-E1 cells was revealed as normal cell responses. Pre-immersion treatment was found to effectively reduce the surface concentrations of alloying elements. Micro-alloying with 1 at.% yttrium did not significantly affect cell adhesion and proliferation, but slightly decreased alkaline phosphatase (ALP) activity on rough surfaces. Lower cell adhesion and proliferation were found on smooth surfaces of Zr-based BMGs compared to their rougher counterparts. Higher ALP activity was detected on rougher surfaces. To obtain a mechanistic understanding surface free energy was correlated with cell adhesion.
Collapse
|
23
|
Peri-implant reactivity and osteoinductive potential of immobilized rhBMP-2 on titanium carriers. Acta Biomater 2010; 6:4405-21. [PMID: 20558328 DOI: 10.1016/j.actbio.2010.06.009] [Citation(s) in RCA: 42] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2009] [Revised: 06/04/2010] [Accepted: 06/08/2010] [Indexed: 11/29/2022]
Abstract
Recombinant human BMP-2 (rhBMP-2) was immobilized non-covalently and covalently as a monolayer on plasma vapour deposited (PVD) porous commercially pure titanium surfaces in amounts of 5-8 μg cm(-2), providing a ca. 10-fold increase vs. previously reported values. Dissociation of the immobilized [125I]rhBMP-2 from the surface occurred in a two-phase exponential decay: a first rapid phase (ca. 15% of immobilized BMP-2) with a half-life of 1-2 days and a second slow sustained release phase (ca. 85% of immobilized BMP-2) with a half-life of 40-60 days. Dissociation rate constants of sustained release of k(-1)=1.3-1.9 x 10(-7)s(-1) were determined, allowing an estimation of the binding constants (K(A)) for the adsorbed rhBMP-2 monolayer, to be around 10(12) M(-1). The rhBMP-2-coated surfaces showed a high level of biological activity, as demonstrated by in vitro epifluorescence tests for alkaline phosphatase with MC3T3-E1 cells and in vivo experiments. In vivo osteoinductivity of rhBMP-2-coated implants was investigated in a gap-healing model in the trabecular bone of the distal femur condylus of sheep. Healing occurred without inflammation or capsule formation. The calculated concentration of released rhBMP-2 in the 1mm gap ranged from 20 to 98 nM--well above the half-maximal response concentration (K(0.5)) for inducing alkaline phosphatase in MC3T3-E1 cells. After 4, 9 and 12 weeks the bone density (BD) and bone-to-implant contact (BIC) of the explanted implants were assessed histomorphometrically. Implants with immobilized rhBMP-2 displayed a significant (2- to 4-fold) increase in BD and BIC values vs. negative controls after 4-9 weeks. Integration of implants by trabecular bone was achieved after 4 weeks, indicating a mean "gap-filling rate" of ∼250 μm week(-1). Integration of implants by cortical bone was observed after 9 weeks. Control implants without rhBMP-2 were not osseointegrated. This study demonstrates the feasibility of enhancing peri-implant osseointegration and gap bridging by immobilized rhBMP-2 on implant surfaces which may serve as a model for future clinical applications.
Collapse
|
24
|
Polysaccharides coatings on medical-grade PVC: a probe into surface characteristics and the extent of bacterial adhesion. Molecules 2010; 15:1007-27. [PMID: 20335959 PMCID: PMC6263189 DOI: 10.3390/molecules15021007] [Citation(s) in RCA: 59] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2010] [Revised: 02/22/2010] [Accepted: 02/23/2010] [Indexed: 11/16/2022] Open
Abstract
Medical-grade polyvinyl chloride was coated by polysaccharides through a novel physicochemical approach. An initial surface activation was performed foremost via diffuse coplanar surface barrier discharge plasma in air at ambient temperature and pressure. Then, radical graft copolymerization of acrylic acid through grafting-from pathway was directed to render a well-defined brush of high density, and finally a chitosan monolayer and chitosan/pectin alternating multilayer were bound onto the functionalized surfaces. Surface characteristics were systematically investigated using several probe techniques. In vitro bacterial adhesion and biofilm formation assays indicated that a single chitosan layer was incapable of hindering the adhesion of a Staphylococcus aureus bacterial strain, while up to 30% reduction was achieved by the chitosan/pectin layered assembly. On the other hand, chitosan and chitosan/pectin multilayer could retard Escherichia coli adhesion by 50% and 20%, respectively. Furthermore, plasma treated and graft copolymerized samples were also found effective to diminish the degree of adherence of Escherichia coli.
Collapse
|
25
|
Abstract
INTRODUCTION Modern application of soft contact lenses demands safe and comfortable wear over extended time periods up to one month. Lenses that exhibit and sustain complete water wetting allow thick tear-film deposition, minimize film rupture, and permit smooth tear recovery upon lid closure. Water contact angles determined using an air bubble captive on a lens best gauge the in-vivo wetting state. To achieve highly water wetting lenses demands that contact-angle hysteresis be eliminated and that the advancing and receding angles both approach zero. Since lens wear exposes the anterior surface to tear proteins, lens wettability should be measured in the presence of tear-film components. METHODS A captive-bubble technique is applied to measure the advancing and receding contact angles of two commercial silicone-hydrogel lenses: PureVision (PV) and Focus Night & Day (CF) and a standard HEMA (hydroxethyl-methacrylate) hydrogel lens: Acuvue (AV). In the captive-bubble method, an air bubble immersed in aqueous solution is brought into contact with the contact lens. The contact angle through water during bubble expansion yields the receding angle. Bubble contraction gives the water advancing angle. Contact-angle hysteresis is the difference between the advancing and receding angles. RESULTS In isotonic solution, all three lenses display considerable contact-angle hysteresis with advancing angles of almost 90 degrees. When lysozyme and/or mucin were added to the aqueous solution, hysteresis was eliminated, and equivalent and high water wetting was achieved for the three lenses. Only the advancing angle in isotonic solution provided discriminating evidence for differences in surface chemistry. Covalent attachment of polyethyleneglygol (PEG) to the PV lens surface achieved complete water wetting independent of the presence of tear protein in the solution. CONCLUSIONS The captive-bubble technique provides contact angles that are relevant to on-eye lens wear. Both advancing and receding contact angles are important to lens wettability performance. When lysozyme and/or mucin are present in the solution, PV, CF, and AV lenses display low advancing and receding contact angles indicative of equivalent wettability performance. This result is due to molecular adsorption of the proteins onto the lens external surface. Covalently attached PEG on the PV lens not only provides complete water wetting but also minimizes or even eliminates protein adsorption.
Collapse
|
26
|
Modified titanium surfaces promote accelerated osteogenic differentiation of mesenchymal stromal cells in vitro. Bone 2009; 45:17-26. [PMID: 19332166 DOI: 10.1016/j.bone.2009.03.662] [Citation(s) in RCA: 192] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/10/2008] [Revised: 03/12/2009] [Accepted: 03/16/2009] [Indexed: 12/24/2022]
Abstract
Titanium (Ti) is the material of choice for dental and orthopaedic implants due to its highly biocompatible nature. Modification of the implant surface, either topographically (as roughness) or chemically, can promote accelerated osteogenesis in vivo and greatly increase bone-implant contact and bonding strength. In this paper, we sought to characterise the cellular and molecular responses of human bone marrow-derived mesenchymal stromal cells (hMSCs) to two modified Ti surfaces: a rough hydrophobic surface that was sand-blasted and acid-etched (SLA) and an SLA surface of the same roughness that was chemically modified to have high wettability/hydrophilicity (SLActive). A smooth polished (SMO) Ti surface was used as a control. Whilst no differences in initial cell attachment to any of the surfaces were observed, we found that hMSCs cultured on the rough surfaces underwent a decrease in cell number early in culture, yet simultaneously expressed higher levels of the osteogenic markers SPP1, RUNX2 and BSP. Furthermore, deposits of calcified matrix were observed at earlier time points on both SLA and SLActive surfaces compared to SMO and this correlated with increased expression of the osteogenic promoter WNT5A in response to the rough surfaces. Osteogenic responses to SLActive were moderately better than the hydrophobic SLA surface and gene expression studies indicate that WNT5A activation may be responsible for this increased osteogenic differentiation.
Collapse
|
27
|
Chlorhexidine gluconate mouthwashes as a surfactant for addition-reaction silicone impressions. THE EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY 2009; 17:2-8. [PMID: 19378615] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Addition-reaction silicone impression (PVS) materials are hydrophobic. Hydrophobicity of the impression material may interfere with the wetting of the tooth, resulting in void formation. The study investigates whether conditioning teeth with Chlorhexidine-gluconate based mouthwashes can reduce the hydrophobicity and the number of voids on PVS impressions. Impression material contact angle specimens on bovine tooth surfaces were measured using a Reflex Microscope. PVS impressions (President) were made of untreated bovine teeth in three groups (1, 2 and 3) and fourth group used Impregum polyether impression material: Group I was used as a control group, and original and mint flavoured Corsodyl (Chlorhexidine) mouthwashes were used as clinical surfactants in Groups 2 and 3, respectively. Contact angle readings were recorded on each side of every impression in each of the four groups and compared by an analysis of variance. In the second part of the study, the numbers of air voids on impression surfaces were visually recorded. The proportions of air voids in the groups were compared using a Chi-squared test. The mean angle for Group 3 with mint flavoured Corsodyl mouthwash was significantly smaller than that of any of the other groups (P < 0.05). The only statistically significant (P < 0.01) comparisons of the proportions of air voids were between Group 4 and each of the other experimental groups, with the percentage of voids being significantly greater in Group 4. Although Corsodyl mint significantly reduced the mean contact angle it did not significantly reduce the percentage of voids on impression surfaces.
Collapse
|
28
|
[The influence of hygroscopic expansion on nanohybrid composite restorations]. REVISTA MEDICO-CHIRURGICALA A SOCIETATII DE MEDICI SI NATURALISTI DIN IASI 2009; 113:235-240. [PMID: 21495325] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
UNLABELLED Hygroscopic expansion of resin materials is a common phenomena due to water adsorption into the resin matrix. This expansion is dependent upon the chemical structure of the material. Water sorption of resin dental material may contribute to stress release immediately after polymerization shrinkage has occurred. The aim of this study was to evaluate the influence of water storage on nanohybrid composite by assessment of marginal enamel sealing of restorations. MATERIAL AND METHOD 30 human teeth extracted for periodontal or orthodontic reasons were used in these study. Cavities were prepared and restored using a nanohybrid composite (Ceramix Mono, Dentsply DeTrey) and a total-etch adhesive system (Prime&Bond NT, Dentsply DeTrey). The teeth were then randomly divided in three groups which were stored for various times in deionized water (one hour, 24 hours and 7 days). After the storage period, the teeth were immersed in methylen blue 1% for 24 h. Then specimens were axially cut and the dye penetration within the occlusal enamel interface was evaluated using optic microscope. RESULTS Kruskal-Wallis test showed significant differences of dye penetration between the long-term hydrated groups and the group hydrated for only one hour (p < 0.05). The mean value of dye penetration decreased from 0.04 mm to 0.1 mm after water storage for both 24 hours and 7 days. However, good sealing in enamel margins of restorations was observed even without hydration. CONCLUSION Our results confirm that nanohybrid composites used with total etch adhesives systems have good ability to seal the enamel margins and water sorption can improve this sealing.
Collapse
|
29
|
Fibrous poly(chitosan-g-DL-lactic acid) scaffolds prepared via electro-wet-spinning. Acta Biomater 2008; 4:876-86. [PMID: 18356124 DOI: 10.1016/j.actbio.2008.01.001] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2007] [Revised: 01/05/2008] [Accepted: 01/07/2008] [Indexed: 11/19/2022]
Abstract
DL-lactic acid was grafted onto chitosan to produce poly(chitosan-g-DL-lactic acid)(PCLA) copolymers. These PCLAs were then spun into submicron and/or nanofibers to fabricate scaffolds using an electro-wet-spinning technique. The diameter of fibers in different scaffolds could vary from about 100 nm to around 3 microm. The scaffolds exhibited various pore sizes ranging from about 1 microm to less than 30 microm and different porosities up to 80%. Two main processing parameters, that is, the concentration of PCLA solutions and the composition proportions of coagulation solutions, were optimized for obtaining desired scaffolds with well-controlled structures. The tensile properties of the scaffolds in both dry and hydrated states were examined. Significantly improved tensile strength and modulus for these fibrous scaffolds in their hydrated state were observed. The data collected from in vitro rabbit-fibroblast/scaffold culture showed that there were no substantial differences in the viability, density and distribution of cultured fibroblasts between PCLA scaffolds and pure chitosan scaffolds.
Collapse
|
30
|
Thermal and spectrophotometric studies of new crosslinking method for collagen matrix with glutaraldehyde acetals. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2008; 19:1215-23. [PMID: 17701321 DOI: 10.1007/s10856-007-0151-0] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/13/2005] [Accepted: 03/23/2006] [Indexed: 05/16/2023]
Abstract
Despite the many existing crosslinking procedures, glutaraldehyde (GA) is still the method of choice used in the manufacture of bioprosthesis. The major problems with GA are: (a) uncontrolled reactivity due to the chemical complexity or GA solutions; (b) toxicity due to the release of GA from polymeric crosslinks; and (c) tissue impermeabilization due to polymeric and heterogeneous crosslinks formation, partially responsible for the undesirable calcification of the bioprosthesis. A new method of crosslinking glutaraldehyde acetals has been developed with GA in acid ethanolic solution, and after the distribution inside de matrix, GA is released to crosslinking. Concentrations of hydrochloride acid in ethanolic solutions between 0.1 and 0.001 mol/L with GA concentration between 0.1 and 1.0% were measured in an ultraviolet spectrophotometer to verify the presence of free aldehyde groups and polymeric compounds of GA. After these measurements, the solutions were used to crosslink bovine pericardium. The spectrophotometric results showed that GA was better protected in acetal forms for acid ethanolic solution with HCl at 0.003 mol/L and GA 1.0%(v/v). The shrinkage temperature results of bovine pericardium crosslinked with acetal solutions showed values near 85 degrees C after the exposure to triethylamine vapors.
Collapse
|
31
|
Pilot investigation of the hydrating effects of topical acne medications. J Drugs Dermatol 2007; 6:810-6. [PMID: 17763612] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Topical therapies are effective in managing acne vulgaris but are associated with local adverse effects such as irritation and dryness. This 4-week pilot study compared skin hydration in 36 healthy adult women randomized to treatment with 1 of 4 topical therapies: 2 different (jar and tube) clindamycin 1%/benzoyl peroxide 5% gels, sodium sulfacetamide 10% lotion, or over-the-counter (OTC) moisturizing cream. Subjects treated with OTC moisturizer or sodium sulfacetamide exhibited decreased water loss, increased water retention, similar or improved levels of skin hydration, and decreased desorption rates. In contrast, subjects treated with jar or tube clindamycin/benzoyl peroxide had increased water loss, decreased water retention, decreased hydration, and increased desorption rates. Skin dryness decreased slightly in the moisturizer group. No serious adverse events occurred. Overall, the OTC moisturizer had the best skin hydration profile. Sodium sulfacetamide demonstrated some moisturizing characteristics, and no clinically relevant differences were noted between jar and tube clindamycin/benzoyl peroxide gels.
Collapse
|
32
|
Abstract
There is an increasing need to develop new biomaterials as tissue engineering scaffolds. Unfortunately, many of the materials that have been studied for these purposes are polyesters that hydrolytically degrade into acidic products, which may harm the surrounding tissue, and lead to accelerated degradation of the biomaterial. To overcome this disadvantage, a novel class of biomaterials based on a cyclic acetal unit has been created. Specifically, materials based upon the monomer 5-ethyl-5-(hydroxymethyl)-beta,beta-dimethyl-1,3-dioxane-2-ethanol diacrylate (EHD) is examined. This study investigates the effects of fabrication parameters, including initiator content, volume of diluent, and volume of accelerant, on several properties of EHD networks. Twelve different formulations were fabricated by varying the three parameters in a factorial design. The effects of the fabrication parameters on properties of the EHD networks were examined. Results show that the volume of accelerant most affected the EHD network gelation time, while the volume of diluent most affected the maximum reaction temperature, sol fraction, and degree of swelling. Cell viability on the EHD networks varied between (18 +/- 6)% and (57 +/- 10)% of the control at 4 h, and between (36 +/- 14)% and (140 +/- 50)% of the control at 8 h. These results indicate that it is possible to control the properties of the EHD networks by varying the fabrication parameters, and that EHD networks support a viable cell population.
Collapse
|
33
|
Design of a novel hydrogel-based intelligent system for controlled drug release. J Control Release 2004; 95:391-402. [PMID: 15023451 DOI: 10.1016/j.jconrel.2003.12.004] [Citation(s) in RCA: 145] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2003] [Accepted: 12/01/2003] [Indexed: 11/20/2022]
Abstract
The present work focused on the design of an assembled drug delivery system (DDS) to provide multifunctions, such as drug protection, self-regulated oscillatory release, and targeted uni-directional delivery by a bilayered self-folding gate and simple surface mucoadhesion. In this device, a pH-sensitive hydrogel together with a poly(hydroxyethyl methacrylate) (HEMA) barrier was used as a gate to control drug release. In addition, poly(HEMA) coated with poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO-PPO-PEO) surfactant was utilized to enhance mucoadhesion on the device surface. The release profiles of two model drugs, acid orange 8 (AO8) and bovine serum albumin (BSA) were studied in this assembled system, which compared with the conventional drug-entrapped carriers and enteric-coating systems. Furthermore, targeted uni-directional release was demonstrated in a side-by-side diffusion cell. In conclusion, for such an assembled device, the poly(HEMA) layer not only affects the folding direction but also serves as a barrier to protect the model drugs. The release time can be controlled by the thickness of the bilayered gate and the drug reservoir. Due to the reversible swelling behavior of poly(methyacrylic acid-g-ethylene glycol) (p(MAA-g-EG)) gels, the bilayered gate can sense the environmental pH change and achieve an oscillatory release pattern. Moreover, the local targeting and uni-directional release have been successfully demonstrated in vitro.
Collapse
|
34
|
Abstract
Transformations between solid phases in dosage forms can lead to instability in drug release. Thus, it is important to understand mechanisms and kinetics of phase transformations and factors that may influence them. During wet granulation theophylline shows pseudopolymorphic changes that may alter its dissolution rate. The aim of this study was to investigate whether excipients, such as alpha-lactose monohydrate or the highly water absorbing silicified microcrystalline cellulose (SMCC) can influence the hydrate formation of theophylline. In particular, the aim was to study if SMCC offers protection against the formation of theophylline monohydrate relative to alpha-lactose monohydrate in wet masses after an overnight equilibration and the stability of final granules during controlled storage. In addition, the aim was to study the use of spectroscopic methods to identify hydrate formation in the formulations containing excipients. Off-line evaluation of materials was performed using X-ray powder diffractometry, near infrared and Raman spectroscopy. alpha-Lactose monohydrate with minimal water absorbing potential was not able to prevent but enhanced hydrate formation of theophylline. Even though SMCC is able to take large amounts of water into its internal structure, it was able to inhibit the formation of theophylline monohydrate only at low moisture contents, not at the amounts of water needed to form granules. Both the spectroscopic methods used could identify the hydrate formation even though there were excipients in the formulation.
Collapse
|
35
|
Hexametaphosphate effects on tooth surface conditioning film chemistry--in vitro and in vivo studies. THE JOURNAL OF CLINICAL DENTISTRY 2002; 13:38-43. [PMID: 11507931] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 02/21/2023]
Abstract
These studies compared the effects of Crest Dual Action Whitening dentifrice with sodium hexametaphosphate and control commercial dentifrices on the surface chemistry of conditioning film-coated dental enamel in vitro and in vivo. Conditioning film chemistry was studied by measurements of film thickness, ability to wet the surface/surface energy, conditioning film chemical composition and zeta potential. Laboratory and in vivo studies demonstrated that brushing and chemical-only treatment of pellicle-coated enamel surfaces produced marked changes in surface chemistry. Brushing of surfaces with all commercial dentifrices significantly reduced pellicle film quantity. Effects on non-brushed areas, of significance in the clinical situation, were different for different dentifrices. For dentifrice chemical treatments, calcium phosphate surface active builders, such as pyrophosphate and hexametaphosphate, produced stronger effects than standard (non-tartar control) dentifrices, peroxide baking soda dentifrices and dentifrices formulated with carboxylate polymers, viz. Colgate Total with copolymer. Crest Dual Action Whitening hexametaphosphate dentifrice removed more pellicle conditioning film, produced a lower zeta potential, produced the largest changes in film composition and had the greatest impact on surface free energies of the tested dentifrices. Crest Dual Action Whitening dentifrice also produced lasting changes in the reacquisition of pellicle conditioning film, as established by in vitro cycling immersion studies. Crest Dual Action Whitening dentifrice produced stronger and more lasting effects on surface film chemistry than low molecular weight pyrophosphate (Crest Tartar Control) or other polymeric-based dentifrice systems (Colgate Total). These surface chemistries may contribute to the unique clinical actions of hexametaphosphate established in recently reported, randomized clinical studies of tartar control, stain prevention and stain removal effects.
Collapse
|
36
|
Effect of disintegrants with different hygroscopicity on dissolution of Norfloxacin/Pharmatose DCL 11 tablets. Int J Pharm 2001; 216:127-35. [PMID: 11274814 DOI: 10.1016/s0378-5173(01)00584-1] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
This paper reports the effect of disintegrant hygroscopicity on dissolution of tablets obtained by compression at 85 MPa of mixtures of Norfloxacin and different proportions of a disintegrant (Starch 1500, PVP XL 10 or Croscarmellose sodium) and a diluent (Pharmatose DCL 11). Dissolution behavior was evaluated according to USP 23, apparatus 2 (paddle) at 50 rpm and using 750 ml acetate buffer solution of pH 4, at 37 degrees C, as medium. Norfloxacin added of increasing proportions, in a given range, of each disintegrant or the diluent increased the drug dissolved. Addition of increasing proportions of Pharmatose DCL 11 to Norfloxacin with 5% of the high hygroscopic Starch 1500 reduced the dissolution improvement effect of Pharmatose DCL 11. Addition of 5% Pharmatose DCL 11 to tablets of the middle hygroscopic Croscarmellose sodium and Norfloxacin slightly reduced the Croscarmellose sodium dissolution promoting effect, while addition of 15% Pharmatose DCL 11 to tablets of the low hygroscopic PVP XL 10 and Norfloxacin showed no inhibition but potentiated substantially the dissolution of Norfloxacin. These effects were attributed to competition for the available water in the tablet and to different water consume, for dissolution or hydration, by the diluent and the disintegrants.
Collapse
|
37
|
[Treatment of acute exacerbated atopic eczema with emollient-antiseptic preparations using the "wet wrap" ("wet pajama") technique]. DER HAUTARZT 1999; 50:418-21. [PMID: 10427510 DOI: 10.1007/s001050050934] [Citation(s) in RCA: 22] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
Abstract
Six patients (3 children and 3 adults) with acute exacerbated atopic eczema were treated with basic emollients in combination with chlorhexidine-soaked dressings over a period of three days using the "wet-pyjama" technique. Improvement of eczema was documented with the severity score "Scoring of Atopic Dermatitis" (SCORAD); most pronounced changes were found for the subjective parameters itch and sleep loss. Paralleling skin improvement a reduction of Staphylococcus aureus colonisation was noted. Improvement of skin changes lasted beyond the active treatment period. Wet-wrap dressings are an effective treatment modality for atopic eczema without use of corticosteroids and can be used easily on an outpatient basis when manufactured dressings are used.
Collapse
|
38
|
Wetting properties of saliva substitutes on acrylic resin. INT J PROSTHODONT 1997; 10:473-7. [PMID: 9495167] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
The good wetting of the acrylic resin by saliva substitutes is of clinical importance in xerostomic patients. This study evaluated the wetting properties of different artificial saliva formulations that were mucin-based, carboxymethylcellulose-based, and concentrated ion-based on poly(methyl methacrylate) denture base resin, and compared these properties with natural saliva. The wetting properties of the test materials were examined by contact angle measurements. Ninety-six samples that measured 30 x 30 x 3 mm were examined. The wetting properties of mucin-containing and carboxymethylcellulose-containing substitutes on poly(methyl methacrylate) were significantly better than those of human saliva. Mucin-containing artificial salivas had the best wetting properties on the acrylic resin for the materials tested.
Collapse
|
39
|
Abstract
OBJECTIVES The purpose of this study was to evaluate the influence of six treatments on the dispersive, acid, and base components of the free surface energy of dentin. METHODS Occlusal dentin surfaces were polished with 4000 grit abrasive paper, washed and air dried. Characteristics of the surface energy were calculated by measuring contact angles of the four following liquids:alpha-bromonaphtalene, glycerol, ethylene glycol, and water. The dentin was then treated with aqueous solutions containing: (1) oxalic acid and glycine (OX/GLY),(2) oxalic acid, glycine, and HEMA (OX/GLY/HEMA), (3) phosphoric acid (PA), (4) maleic acid (MA),(5) EDTA, or (6) NaCIO. After treatment, washing and air drying, the energy characteristics of the samples were evaluated again. RESULTS Three kinds of wetting behavior were observed: an increase (OX/GLY/HEMA), a stabilization (PA, NaCIO) or a decrease (OX/GLY, MA, EDTA) of the wettability of the dentin surface. The calculations demonstrated that dentin surfaces are basic. SIGNIFICANCE This study of the evolution of the surface energy components gave information on adhesion mechanisms involving hydrophilic and hydrophobic interactions. The results may be helpful in the formulation of conditioners and primers.
Collapse
|