Occurrence and Characteristics of Microplastics in a Wastewater Treatment Plant

Large quantities of microplastics (MPs) are discharged into the hydrosphere via the municipal wastewater treatment plant (WWTP) as an important route. Herein, we sampled the influent, effluent and sludge of WWTP in order to investigate the abundance, size, type, and shape of MPs. The detected MPs were primarily in the shape of fiber with the abundance up to 44 particles per liter. Polyethylene terephthalate, polypropylene, and polyethylene were found to be the three largest types of MPs. MPs in the influent was effectively eliminated with a removal efficiency of ~ 96%. However, a large quantity of MPs was still discharged in the effluent and the excess sludge, approximately 2.87 × 10⁸ particles per day, indicating that some specific control facilities should be installed at WWTP to minimize the environmental impacts of MPs.

Feline Calicivirus Proteinase-Polymerase Protein Degrades mRNAs To Inhibit Host Gene Expression

To replicate efficiently and evade the antiviral immune response of the host, some viruses degrade host mRNA to induce host gene shutoff via encoding shutoff factors. In this study, we found that feline calicivirus (FCV) infection promotes the degradation of endogenous and exogenous mRNAs and induces host gene shutoff, which results in global inhibition of host protein synthesis. Screening assays revealed that proteinase-polymerase (PP) is a most effective factor in reducing mRNA expression. Moreover, PP from differently virulent strains of FCV could induce mRNA degradation. Further, we found that the key sites of the PP protein required for its proteinase activity are also essential for its shutoff activity but also required for viral replication. The mechanism analysis showed that PP mainly targets Pol II-transcribed RNA in a ribosome-, 5' cap-, and 3' poly(A) tail-independent manner. Moreover, purified glutathione S-transferase (GST)-PP fusion protein exhibits RNase activity in vitro in assays using green fluorescent protein (GFP) RNA transcribed in vitro as a substrate in the absence of other viral or cellular proteins. Finally, PP-induced shutoff requires host Xrn1 to complete further RNA degradation. This study provides a newly discovered strategy in which FCV PP protein induces host gene shutoff by promoting the degradation of host mRNAs. IMPORTANCE Virus infection-induced shutoff is the result of targeted or global manipulation of cellular gene expression and leads to efficient viral replication and immune evasion. FCV is a highly contagious pathogen that persistently infects cats. It is unknown how FCV blocks the host immune response and persistently exists in cats. In this study, we found that FCV infection promotes the degradation of host mRNAs and induces host gene shutoff via a common strategy. Further, PP protein for different FCV strains is a key factor that enhances mRNA degradation. An in vitro assay showed that the GST-PP fusion protein possesses RNase activity in the absence of other viral or cellular proteins. This study demonstrates that FCV induces host gene shutoff by promoting the degradation of host mRNAs, thereby introducing a potential mechanism by which FCV infection inhibits the immune response.

Interface Modification, Water Absorption Behaviour and Mechanical Properties of Injection Moulded Short Hemp Fiber-Reinforced Thermoplastic Composites

The effects of maleic anhydride, stearic acid and water absorption on the physical and flexural properties of injection moulded short hemp fiber-reinforced thermoplastic composites were investigated, in order to understand the suitability of these materials for outdoor applications. The water absorption, diffusion mechanisms and kinetics of composites were evaluated by immersing the specimens in distilled water at 23 °C. Flexural fracture surface morphologies were investigated in order to compare the results of flexural tests with qualitative morphological observations. The process of water absorption was found to follow the Fickian mode of diffusion. Flexural properties (Ef and σfm) were affected by the water absorption. The addition of maleic anhydride and stearic acid enhanced the resistance to water absorption of composites and resulted in a slight increase of flexural properties of composites based on a high-density polyethylene (HDPE) matrix. The reduction in flexural properties induced by the degradation of matrix-fiber interfacial bonding due to water absorbed was confirmed by scanning electron microscopy analysis.

Numerical and Experimental Results on Charpy Tests for Blends Polypropylene + Polyamide + Ethylene Propylene Diene Monomer (PP + PA + EPDM)

This paper presents results from numerical and experimental investigation on Charpy tests in order to point out failure mechanisms and to evaluate new polymeric blends PP + PA6 + EPDM. Charpy tests were done for initial velocity of the impactor of 0.96 m/s and its mass of 3.219 kg and these data were also introduced in the finite element model. The proposed model takes into account the system of four balls, including support and the ring of fixing the three balls and it has a finer discretization of the impact area to highlight the mechanisms of failure and their development in time. The constitutive models for four materials (polypropylene with 1% Kritilen, two blends PP + PA6 + EPDM and a blend PA6 + EPDM) were derived from tensile tests. Running simulations for each constitutive model of material makes possible to differentiate the destruction mechanisms according to the material introduced in the simulation, including the initiation and the development of the crack(s), based on equivalent plastic strain at break (EPS) for each material. The validation of the model and the simulation results were done qualitatively, analyzing the shape of broken surfaces and comparing them to SEM images and quantitatively by comparing the impact duration, energy absorbed by the sample, the value of maximum force during impact. The duration of the destruction of the specimen is longer than the actual one, explainable by the fact that the material model does not take into account the influence of the material deformation speed in Charpy test, the model being designed with the help of tests done at 0.016 m/s (1000 mm/min) (maximum strain rate for the tensile tests). Experimental results are encouraging for recommending the blends 20% PP + 42% PA6 + 28% EPDM and 60% PA6 + 40% EPDM as materials for impact protection at low velocity (1 m/s). Simulation results are closer to the experimental ones for the more brittle tested materials (with less content of PA6 and EPDM) and more distanced for the more ductile materials (with higher content of PA6 and EPDM).

Development of Pressure-Responsive PolyPropylene and Biochar-Based Materials

In this research paper, we reported the synthesis of biochar-based composites using biochar derived from exhausted tea leaves and polypropylene. The resulting materials were deeply characterized investigating mechanical (dynamic mechanical thermal analysis), thermal (thermogravimetrical analysis and differential scanning calorimetry), morphological (field emission scanning microscopy) and electrical properties vs. temperature. Furthermore, electrical conductivity was studied for a wide range of pressures showing an irreversible plastic deformation. An increment of one order of magnitude in the conductivity was observed in the case of 40 wt% biochar loading, reaching a value of 0.2 S/m. The material produced exhibited the properties of an irreversible pressure sensor.

Immune Profiling of Human Gut-Associated Lymphoid Tissue Identifies a Role for Isolated Lymphoid Follicles in Priming of Region-Specific Immunity

The intestine contains some of the most diverse and complex immune compartments in the body. Here we describe a method for isolating human gut-associated lymphoid tissues (GALTs) that allows unprecedented profiling of the adaptive immune system in submucosal and mucosal isolated lymphoid follicles (SM-ILFs and M-ILFs, respectively) as well as in GALT-free intestinal lamina propria (LP). SM-ILF and M-ILF showed distinct patterns of distribution along the length of the intestine, were linked to the systemic circulation through MAdCAM-1⁺ high endothelial venules and efferent lymphatics, and had immune profiles consistent with immune-inductive sites. IgA sequencing analysis indicated that human ILFs are sites where intestinal adaptive immune responses are initiated in an anatomically restricted manner. Our findings position ILFs as key inductive hubs for regional immunity in the human intestine, and the methods presented will allow future assessment of these compartments in health and disease.

Glucose-Dependent Insulinotropic Polypeptide Is a Pancreatic Polypeptide Secretagogue in Humans

BACKGROUND

Glucose-dependent insulinotropic polypeptide (GIP) has been suggested to stimulate the secretion of pancreatic polypeptide (PP), an islet hormone thought to regulate gut motility, appetite, and glycemia.

OBJECTIVE

To determine whether human GIP1-42 (hGIP) stimulates PP secretion.

METHOD

As glycemia modulates the secretion of PP, we measured plasma PP concentrations from 2 studies in healthy men (n = 10) and in patients with type 2 diabetes (T2D) (n = 12), where hGIP1-42 had been administered intravenously during fasting glycemia, hyperglycemia (12 mmol/L), and insulin-induced hypoglycemia (targets: 2.5 mmol/L [healthy]; 3.5 mmol/L [T2D]). Porcine GIP1-42 (pGIP) was also infused intra-arterially in isolated porcine pancreata (n = 4).

RESULTS

Mean fasting plasma glucose concentrations were approximately 5 mmol/L (healthy) and approximately 8 mmol/L (T2D). At fasting glycemia, PP concentrations were higher during intravenous hGIP1-42 infusion compared with saline in healthy men (mean [standard error of the mean, SEM], net incremental areas under the curves (iAUCs)[0-30min], 403 [116] vs -6 [57] pmol/L × min; P = 0.004) and in patients with T2D (905 [177] vs -96 [86] pmol/L × min; P = 0.009). During hyperglycemic clamping, mean [SEM] PP concentrations were significantly higher during hGIP1-42 infusion compared with saline in patients with T2D (771 [160] vs -183 [117] pmol/L × min; P = 0.001), but not in healthy individuals (-8 [86] vs -57 [53] pmol/L × min; P = 0.69). When plasma glucose levels were declining in response to exogenous insulin, mean [SEM] PP concentrations were higher during hGIP1-42 infusion compared with saline in healthy individuals (294 [88] vs -82 [53] pmol/L × min; P = 0.0025), but not significantly higher in patients with T2D (586 [314] vs -120 [53]; P = 0.070). At target hypoglycemia, PP levels surged in both groups during both hGIP1-42 and saline infusions. In isolated pancreata, pGIP1-42 increased mean [SEM] PP output in the pancreatic venous effluent (baseline vs infusion, 24[5] vs 79 [16] pmol/min x min; P = 0.044).

CONCLUSION

GIP1-42 increases plasma PP secretion in healthy individuals, patients with T2D, and isolated porcine pancreata. Hyperglycemia blunts the stimulatory effect of hGIP1-42 in healthy individuals, but not in patients with T2D.

Adverse effects of oxo-degradable plastic leachates in freshwater environment

The production of biodegradable plastics is considered to be a way to reduce plastic waste issue. Among others, oxo-degradant additives enable a faster degradation of plastics in the environment. However, the introduction of these new materials could provoke the release of substances potentially toxic in the environment. This work determined and compared the toxicity of leachates from various additivated polymers (polyethylene, PE; polypropylene, PP; polystyrene, PS) upon different test organisms: plants (Sorghum saccharatum, Lepidium sativum, Sinapis alba, and Vicia faba), crustacean (Daphnia magna), and luminescent bacteria (Vibrio fischeri). Daphnia magna survival was mainly affected by PS and PP leachates (72% and 61% effect, respectively) while PS notably reduced the reproduction rate. On plants, only PP exerted a negative effect (S. saccharatum IG% 32.4), while V. fischeri always showed values around 50%. The data integration, through the Toxicity Test Battery Integrated Index (TBI) approach, allowed to rank the leachates toxicity as PE > PS > PP. This result could be mainly ascribable to the highest metals content in PE since no difference with organic compounds analysis was evidenced. In conclusion, since the polymers exerted dissimilar toxicity, the additive could not be considered the sole responsible of the measured toxicity, but its role in the enhancement of the virgin polymers leachates effects can be solidly hypothesized.

Surface Modification of Fumed Silica by Plasma Polymerization of Acetylene for PP/POE Blends Dielectric Nanocomposites

Novel nanocomposites for dielectric applications-based polypropylene/poly(ethylene-co-octene) (PP/POE) blends filled with nano silica are developed in the framework of the European ‘GRIDABLE’ project. A tailor-made low-pressure-plasma reactor was applied in this study for an organic surface modification of silica. Acetylene gas was used as the monomer for plasma polymerization in order to deposit a hydrocarbon layer onto the silica surface. The aim of this modification is to increase the compatibility between silica and the PP/POE blends matrix in order to improve the dispersion of the filler in the polymer matrix and to suppress the space charge accumulation by altering the charge trapping properties of these silica/PP/POE blends composites. The conditions for the deposition of the acetylene plasma-polymer onto the silica surface were optimized by analyzing the modification in terms of weight loss by thermogravimetry (TGA). X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray fluorescence spectroscopy (EDX) measurements confirmed the presence of hydrocarbon compounds on the silica surface after plasma modification. The acetylene plasma modified silica with the highest deposition level was selected to be incorporated into the PP/POE blends matrix. X-ray diffraction (XRD) showed that there is no new crystal phase formation in the PP/POE blends nanocomposites after addition of the acetylene plasma modified silica. Differential scanning calorimetry results (DSC) show two melting peaks and two crystallization peaks of the PP/POE blends nanocomposites corresponding to the PP and POE domains. The improved dispersion of the silica after acetylene plasma modification in the PP/POE blends matrix was shown by means of SEM–EDX mapping. Thermally stimulated depolarization current (TSDC) measurements confirm that addition of the acetylene plasma modified silica affects the charge trapping density and decreases the amount of injected charges into PP/POE blends nanocomposites. This work shows that acetylene plasma modification of the silica surface is a promising route to tune charge trapping properties of PP/POE blend-based nanocomposites.

Rheo-Optical Near-Infrared (NIR) Characterization of Hydroxyl-Functionalized Polypropylene (PPOH)-Mesoporous Silica Nanocomposites Using Two-Trace Two-Dimensional (2T2D) Correlation Analysis

A rheo-optical characterization technique based on the combination of near-infrared (NIR) spectroscopy and mechanical analysis was applied to the nanocomposite consisting of hydroxyl-functionalized polypropylene (PPOH) and mesoporous silica (MPS) to probe the deformation behavior. Substantial levels of spectral changes of NIR spectral features were captured when the polymer samples underwent tensile deformation. Sets of spectra were subjected to projection treatment to remove the effect of baseline fluctuations and thickness change inevitably caused by the tensile deformation of the sample. Then, two-trace two-dimensional (2T2D) correlation spectroscopy was applied to the pretreated spectra to elucidate spectroscopic signature associated with the difference between the initial and deformed samples. An asynchronous correlation peak appears between the bands at 1720 and 1700 nm respectively reflecting the contributions of predominantly amorphous and crystalline component of the PPOH, indicating the predominant variation of amorphous structure followed by that of crystalline structure. In addition, the predominant spectral change related to the amorphous band becomes even more acute by including the MPS with large pores. It is hence likely that the larger pore size of the MPS confines the more amorphous structure, which, in turn, causes simultaneous reorientation of the polymer chains in the amorphous region during the elastic deformation. Consequently, the incorporation of the MPS selectively restricts the deformation of the amorphous structure which eventually provides the obvious increase in the mechanical property of the PPOH polymer.

Retention of acidic and basic analytes in reversed phase column using fluorinated and novel eluent additives for liquid chromatography-tandem mass spectrometry

This research focuses on retention mechanisms in a LC column with C18 stationary phase when novel eluent additives (HFIP, HFTB and TFE as well as NFTB and perfluoropinacol) are used. The retention factors between novel eluent additives and conventional ones like ammonium acetate and ammonium bicarbonate at different eluent pH values were compared. A simple set of drug-like molecules, widely spread over different logP values, containing protonated and deprotonated acids and bases was selected for this investigation. HFIP, HFTB, NFTB and PP demonstrated strong influence on basic polar analytes in basic medium. These additives drastically increased retention. A decrease in retention was observed for acidic analytes when novel eluent additives were used. Additionally, for the first time, the absolute pH (pH_abs) scale was used for expressing the mobile phase pH.

Surface Modification of PET Fiber with Hybrid Coating and Its Effect on the Properties of PP Composites

Surface modification fundamentally influences the morphology of polyethylene terephthalate (PET) fibers produced from abandoned polyester textiles and improve the compatibility between the fiber and the matrix. In this study, PET fiber was modified through solution dip-coating using a novel synthesized tetraethyl orthosilicate (TEOS)/KH550/ polypropylene (PP)-g-MAH (MPP) hybrid (TMPP). The PET fiber with TMPP modifier was exposed to the air. SiO₂ particles would be hydrolyzed from TEOS and become the crystalline cores of MPP. Then, the membrane formed by MPP, SiO₂ and KH550 covered the surface of the PET fiber. TMPP powder was investigated and characterized by fourier transform infrared spectroscopy, scanning electron microscope (SEM) and thermogravimetric analysis (TGA). TMPP-modified PET fiber was researched by X-ray diffraction and SEM. Furthermore, tensile strength of single fiber was also tested. PET fiber/PP composites were studied through dynamic mechanical analysis and SEM. Flexural properties of composites were also measured. The interfacial properties of PET fiber and PP matrix were indirectly represented by contact angle analysis. Results showed that the addition of TEOS is helpful in homogenizing the distribution of PP-g-MAH. Furthermore, TMPP generates an organic-inorganic ‘armor’ structure on PET fiber, which can make up for the damage areas on the surface of PET fiber and strengthen each single-fiber by 14.4%. Besides, bending strength and modulus of TMPP-modified PET fiber-reinforced PP composite respectively, increase by 10 and 800 MPa. The compatibility between PET fiber and PP was also confirmed to be increased by TMPP. Predictably, this work supplied a new way for PET fiber modification and exploited its potential applications in composites.

Carotenoids in human nutrition and health

Carotenoids are naturally occurring pigments found in most fruits and vegetables, plants, algae, and photosynthetic bacteria. Humans cannot synthesize carotenoids and must ingest them in food or via supplementation. Carotenoids have a range of functions in human health. They primarily exert antioxidant effects, but individual carotenoids may also act through other mechanisms; for example, β-carotene has a pro-vitamin A function, while lutein/zeaxanthin constitute macular pigment in the eye. The benefit of lutein in reducing progression of age-related macular eye disease and cataracts is strengthening; an intake recommendation would help to generate awareness in the general population to have an adequate intake of lutein rich foods. There is evidence that carotenoids, in addition to beneficial effects on eye health, also produce improvements in cognitive function and cardiovascular health, and may help to prevent some types of cancer. Despite the evidence for the health benefits of carotenoids, large population-based supplementation studies have produced mixed results for some of the carotenoids. To establish and confirm the health benefits of the different carotenoids more research, including clinical studies, is needed.

Effect of Multiwalled Carbon Nanotubes on the Mechanical Properties of Carbon Fiber-Reinforced Polyamide-6/Polypropylene Composites for Lightweight Automotive Parts

The development of lightweight automotive parts is an important issue for improving the efficiency of vehicles. Polymer composites have been widely applied to reduce weight and improve mechanical properties by mixing polymers with carbon fibers, glass fibers, and carbon nanotubes. Polypropylene (PP) has been added to carbon fiber-reinforced nylon-6 (CF/PA6) composite to achieve further weight reduction and water resistance. However, the mechanical properties were reduced by the addition of PP. In this research, multiwalled carbon nanotubes (CNTs) were added to compensate for the reduced mechanical properties experienced when adding PP. Tensile testing and bending tests were carried out to evaluate the mechanical properties. A small amount of CNTs improved the mechanical properties of carbon fiber-reinforced PA6/PP composites. For example, the density of CF/PA6 was reduced from 1.214 to 1.131 g/cm³ (6.8%) by adding 30 wt % PP, and the tensile strength of 30 wt % PP composite was improved from 168 to 173 MPa (3.0%) by adding 0.5 wt % CNTs with small increase of density (1.135 g/cm³). The developed composite will be widely used for lightweight automotive parts with improved mechanical properties.

Genome-wide analysis of PDX1 target genes in human pancreatic progenitors

Objective

Homozygous loss-of-function mutations in the gene coding for the homeobox transcription factor (TF) PDX1 leads to pancreatic agenesis, whereas heterozygous mutations can cause Maturity-Onset Diabetes of the Young 4 (MODY4). Although the function of Pdx1 is well studied in pre-clinical models during insulin-producing β-cell development and homeostasis, it remains elusive how this TF controls human pancreas development by regulating a downstream transcriptional program. Also, comparative studies of PDX1 binding patterns in pancreatic progenitors and adult β-cells have not been conducted so far. Furthermore, many studies reported the association between single nucleotide polymorphisms (SNPs) and T2DM, and it has been shown that islet enhancers are enriched in T2DM-associated SNPs. Whether regions, harboring T2DM-associated SNPs are PDX1 bound and active at the pancreatic progenitor stage has not been reported so far.

Methods

In this study, we have generated a novel induced pluripotent stem cell (iPSC) line that efficiently differentiates into human pancreatic progenitors (PPs). Furthermore, PDX1 and H3K27ac chromatin immunoprecipitation sequencing (ChIP-seq) was used to identify PDX1 transcriptional targets and active enhancer and promoter regions. To address potential differences in the function of PDX1 during development and adulthood, we compared PDX1 binding profiles from PPs and adult islets. Moreover, combining ChIP-seq and GWAS meta-analysis data we identified T2DM-associated SNPs in PDX1 binding sites and active chromatin regions.

Results

ChIP-seq for PDX1 revealed a total of 8088 PDX1-bound regions that map to 5664 genes in iPSC-derived PPs. The PDX1 target regions include important pancreatic TFs, such as PDX1 itself, RFX6, HNF1B, and MEIS1, which were activated during the differentiation process as revealed by the active chromatin mark H3K27ac and mRNA expression profiling, suggesting that auto-regulatory feedback regulation maintains PDX1 expression and initiates a pancreatic TF program. Remarkably, we identified several PDX1 target genes that have not been reported in the literature in human so far, including RFX3, required for ciliogenesis and endocrine differentiation in mouse, and the ligand of the Notch receptor DLL1, which is important for endocrine induction and tip-trunk patterning. The comparison of PDX1 profiles from PPs and adult human islets identified sets of stage-specific target genes, associated with early pancreas development and adult β-cell function, respectively. Furthermore, we found an enrichment of T2DM-associated SNPs in active chromatin regions from iPSC-derived PPs. Two of these SNPs fall into PDX1 occupied sites that are located in the intronic regions of TCF7L2 and HNF1B. Both of these genes are key transcriptional regulators of endocrine induction and mutations in cis-regulatory regions predispose to diabetes.

Conclusions

Our data provide stage-specific target genes of PDX1 during in vitro differentiation of stem cells into pancreatic progenitors that could be useful to identify pathways and molecular targets that predispose for diabetes. In addition, we show that T2DM-associated SNPs are enriched in active chromatin regions at the pancreatic progenitor stage, suggesting that the susceptibility to T2DM might originate from imperfect execution of a β-cell developmental program.

•

PDX1 ChIP-seq analysis revealed 5664 target genes in human pancreatic progenitors, including unreported target genes.

•

Comparison of PDX1 profiles from PPs and adult human islets identified stage-specific PDX1 target gene sets.

•

T2DM-associated SNPs are enriched in active chromatin regions from iPSC-derived PPs.

•

Three SNPs fall into PDX1 occupied sites, located in intronic regions of the developmental regulatory TFs TCF7L2 and HNF1B.

Potential Hormone Mechanisms of Bariatric Surgery

PURPOSE OF REVIEW

In recent years, the role of the gastrointestinal (GI) tract in energy homeostasis through modulation of the digestion and absorption of carbohydrates and the production of incretin hormones is well recognized.

RECENT FINDINGS

Bariatric surgery for obesity has been a very effective method in substantially improving weight, and numerous studies have focused on intestinal adaptation after bariatric procedures. A number of structural and functional changes in the GI tract have been reported postsurgery, which could be responsible for the altered hormonal responses. Furthermore, the change in food absorption rate and the intestinal regions exposed to carbohydrates may affect blood glucose response. This review hopes to give new insights into the direct role of gut hormones, by summarising the metabolic effects of bariatric surgery.

Molecular characterization of three NPY receptors (Y2, Y5 and Y7) in chickens: Gene structure, tissue expression, promoter identification, and functional analysis

Six neuropeptide Y (NPY) receptors are suggested to mediate the biological actions of NPY, peptide YY (PYY), and pancreatic polypeptide (PP), such as food intake in birds, however, information regarding the structure and signaling of avian NPY receptors are rather limited. In this study, we investigated the gene structure, tissue expression and signaling property of three NPY receptors (cY2, cY5 and cY7) in chickens. The results showed that 1) cY2, cY5 and cY7 contain novel non-coding exons upstream of their start codon and alternative mRNA splicing in their 5'-UTR results in the formation of multiple transcript variants; 2) cY2, cY5 and cY7 transcripts were detected to be widely expressed in adult chicken tissues including various brain regions by RT-PCR, and their expression is controlled by a promoter(s) near exon 1, which display promoter activity in DF-1 cells as demonstrated by Dual-luciferase reporter assay; 3) cY2, cY5 and cY7 expressed in HEK293 cells were preferentially (or potently) activated by cNPY1-36 and cPYY1-37, but not by cPP1-36, and their activation led to the inhibition of cAMP/PKA signaling pathway and activation of MAPK/ERK signaling pathway, monitored by the cell-based luciferase reporter systems or western blots, indicating that the three NPY receptors are functional and capable of transmitting signals effectively. On the whole, our data establishes a molecular basis to elucidate the actions of three functional NPY receptors (cY2, cY5 and cY7) and their ligands in birds, which helps to uncover the conserved roles of these ligand-receptor pairs in vertebrates.

N-Terminal Domain of Feline Calicivirus (FCV) Proteinase-Polymerase Contributes to the Inhibition of Host Cell Transcription

Feline Calicivirus (FCV) infection results in the inhibition of host protein synthesis, known as “shut-off”. However, the precise mechanism of shut-off remains unknown. Here, we found that the FCV strain 2280 proteinase-polymerase (PP) protein can suppress luciferase reporter gene expression driven by endogenous and exogenous promoters. Furthermore, we found that the N-terminal 263 aa of PP (PP_N-263) determined its shut-off activity using the expression of truncated proteins. However, the same domain of the FCV strain F9 PP protein failed to inhibit gene expression. A comparison between strains 2280 and F9 indicated that Val27, Ala96 and Ala98 were key sites for the inhibition of host gene expression by strain 2280 PP_N-263, and PP_N-263 exhibited the ability to shut off host gene expression as long as it contained any two of the three amino acids. Because the N-terminus of the PP protein is required for its proteinase and shut-off activities, we investigated the ability of norovirus 3C-like proteins (3CLP) from the GII.4-1987 and -2012 isolates to interfere with host gene expression. The results showed that 3CLP from both isolates was able to shut off host gene expression, but 3CLP from GII.4-2012 had a stronger inhibitory activity than that from GII.4-1987. Finally, we found that 2280 PP and 3CLP significantly repressed reporter gene transcription but did not affect mRNA translation. Our results provide new insight into the mechanism of the FCV-mediated inhibition of host gene expression.

Alpha-, Delta- and PP-cells: Are They the Architectural Cornerstones of Islet Structure and Co-ordination?

Islet non-β-cells, the α- δ- and pancreatic polypeptide cells (PP-cells), are important components of islet architecture and intercellular communication. In α-cells, glucagon is found in electron-dense granules; granule exocytosis is calcium-dependent via P/Q-type Ca(2+)-channels, which may be clustered at designated cell membrane sites. Somatostatin-containing δ-cells are neuron-like, creating a network for intra-islet communication. Somatostatin 1-28 and 1-14 have a short bioactive half-life, suggesting inhibitory action via paracrine signaling. PP-cells are the most infrequent islet cell type. The embryologically separate ventral pancreas anlage contains PP-rich islets that are morphologically diffuse and α-cell deficient. Tissue samples taken from the head region are unlikely to be representative of the whole pancreas. PP has anorexic effects on gastro-intestinal function and alters insulin and glucagon secretion. Islet architecture is disrupted in rodent diabetic models, diabetic primates and human Type 1 and Type 2 diabetes, with an increased α-cell population and relocation of non-β-cells to central areas of the islet. In diabetes, the transdifferentiation of non-β-cells, with changes in hormone content, suggests plasticity of islet cells but cellular function may be compromised. Understanding how diabetes-related disordered islet structure influences intra-islet cellular communication could clarify how non-β-cells contribute to the control of islet function.

Potential biomarkers of long-term benefit from single-agent trastuzumab or lapatinib in HER2-positive metastatic breast cancer

In 2009 a prospective, randomized Phase II trial (NCT00842998) was initiated to evaluate the activity of HER2-targeting agents without chemotherapy (CT) in HER2-positive metastatic breast cancer (MBC) patients. The primary tumors of the patients enrolled in this study offered a unique opportunity to identify biomarkers that could predict durable clinical benefit from CT-free anti-HER2 therapy. Patients with HER2-positive MBC were randomized to trastuzumab or lapatinib as first-line therapy. CT was added to anti-HER2 therapy in patients failing to achieve tumor regression at the 8-week evaluation and in those progressing at any time. Expression analysis of 105 selected genes was performed from formalin-fixed paraffin-embedded primary tumor samples. The research-based PAM50 intrinsic subtypes were also identified. Additionally, quantitative HER2 (H2T) and p95HER2 (p95) protein expression were evaluated by HERmark® and VeraTag® assay, respectively. Predictors of persistence on protocol (PP) were studied by Cox univariate and multivariate analysis. Nineteen patients were enrolled. Median overall survival was 43 months and median PP was 3.8 months (0.8-38.8+), with 4 patients (21.1%) persisting on single agent trastuzumab or lapatinib for longer than 12 mo (14.9-38.8 + mo). Seventeen patients were evaluable for PP. Gene expression analysis revealed that high expression of the 17q12-21 amplicon genes HER2 and GRB7, and the PAM50 HER2-enriched intrinsic profile, were significantly associated with longer PP. Conversely, high expression of luminal-related genes such as PGR, MDM2 or PIK3CA, or the PAM50 luminal intrinsic profile correlated with reduced PP. Moreover, increasing H2T/p95 ratio was found to be significantly associated with longer PP (HR 0.56 per 2-fold increase in H2T/p95, P = 0.0015). Our data suggest that patients belonging to the "HER2-enriched" subtype and/or having high H2T/p95 protein expression ratio are exquisitely sensitive to anti-HER2 agents. MBC patients with these tumors could be candidates for studies aimed at establishing chemotherapy-free regimens.

Rational Helicobacter pylori therapy: evidence-based medicine rather than medicine-based evidence

Data are available such that choice of Helicobacter pylori therapy for an individual patient can be reliably predicted. Here, treatment success is defined as a cure rate of 90% or greater. Treatment outcome in a population or a patient can be calculated based on the effectiveness of a regimen for infections with susceptible and with resistant strains coupled with the knowledge of the prevalence of resistance (ie, based on formal measurement, clinical experience, or both). We provide the formula for predicting outcome and we illustrate the calculations. Because clarithromycin-containing triple therapy and 10-day sequential therapy are now only effective in special populations, they are considered obsolete; neither should continue to be used as empiric therapies (ie, 7- and 14-day triple therapies fail when clarithromycin resistance exceeds 5% and 15%, respectively, and 10-day sequential therapy fails when metronidazole resistance exceeds 20%). Therapy should be individualized based on prior history and whether the patient is in a high-risk group for resistance. The preferred choices for Western countries are 14-day concomitant therapy, 14-day bismuth quadruple therapy, and 14-day hybrid sequential-concomitant therapy. We also provide details regarding the successful use of fluoroquinolone-, rifabutin-, and furazolidone-containing therapies. Finally, we provide recommendations for the efficient development (ie, identification and optimization) of new regimens, as well as how to prevent or minimize failures. The trial-and-error approach for identifying and testing regimens frequently resulted in poor treatment success. The described approach allows outcome to be predicted and should simplify treatment and drug development.

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS)>tannic acid (TA)>methylcellulose (MC)>triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.

Sarcoplasmic reticulum Ca2+ cycling protein phosphorylation in a physiologic Ca2+ milieu unleashes a high-power, rhythmic Ca2+ clock in ventricular myocytes: relevance to arrhythmias and bio-pacemaker design

Basal phosphorylation of sarcoplasmic reticulum (SR) Ca(2+) proteins is high in sinoatrial nodal cells (SANC), which generate partially synchronized, spontaneous, rhythmic, diastolic local Ca(2+) releases (LCRs), but low in ventricular myocytes (VM), which exhibit rare diastolic, stochastic SR-generated Ca(2+) sparks. We tested the hypothesis that in a physiologic Ca(2+) milieu, and independent of increased Ca(2+) influx, an increase in basal phosphorylation of SR Ca(2+) cycling proteins will convert stochastic Ca(2+) sparks into periodic, high-power Ca(2+) signals of the type that drives SANC normal automaticity. We measured phosphorylation of SR-associated proteins, phospholamban (PLB) and ryanodine receptors (RyR), and spontaneous local Ca(2+) release characteristics (LCR) in permeabilized single, rabbit VM in physiologic [Ca(2+)], prior to and during inhibition of protein phosphatase (PP) and phosphodiesterase (PDE), or addition of exogenous cAMP, or in the presence of an antibody (2D12), that specifically inhibits binding of the PLB to SERCA-2. In the absence of the aforementioned perturbations, VM could only generate stochastic local Ca(2+) releases of low power and low amplitude, as assessed by confocal Ca(2+) imaging and spectral analysis. When the kinetics of Ca(2+) pumping into the SR were increased by an increase in PLB phosphorylation (via PDE and PP inhibition or addition of cAMP) or by 2D12, self-organized, "clock-like" local Ca(2+) releases, partially synchronized in space and time (Ca(2+) wavelets), emerged, and the ensemble of these rhythmic local Ca(2+) wavelets generated a periodic high-amplitude Ca(2+) signal. Thus, a Ca(2+) clock is not specific to pacemaker cells, but can also be unleashed in VM when SR Ca(2+) cycling increases and spontaneous local Ca(2+) release becomes partially synchronized. This unleashed Ca(2+) clock that emerges in a physiological Ca(2+) milieu in VM has two faces, however: it can provoke ventricular arrhythmias; or if harnessed, can be an important feature of novel bio-pacemaker designs.

Mechanical loading stimulates chondrogenesis via the PKA/CREB-Sox9 and PP2A pathways in chicken micromass cultures

Biomechanical stimuli play important roles in the formation of articular cartilage during early foetal life, and optimal mechanical load is a crucial regulatory factor of adult chondrocyte metabolism and function. In this study, we undertook to analyse mechanotransduction pathways during in vitro chondrogenesis. Chondroprogenitor cells isolated from limb buds of 4-day-old chicken embryos were cultivated as high density cell cultures for 6 days. Mechanical stimulation was carried out by a self-designed bioreactor that exerted uniaxial intermittent cyclic load transmitted by the culture medium as hydrostatic pressure and fluid shear to differentiating cells. The loading scheme (0.05 Hz, 600 Pa; for 30 min) was applied on culturing days 2 and 3, when final commitment and differentiation of chondroprogenitor cells occurred in this model. The applied mechanical load significantly augmented cartilage matrix production and elevated mRNA expression of several cartilage matrix constituents, including collagen type II and aggrecan core protein, as well as matrix-producing hyaluronan synthases through enhanced expression, phosphorylation and nuclear signals of the main chondrogenic transcription factor Sox9. Along with increased cAMP levels, a significantly enhanced protein kinase A (PKA) activity was also detected and CREB, the archetypal downstream transcription factor of PKA signalling, exhibited elevated phosphorylation levels and stronger nuclear signals in response to mechanical stimuli. All the above effects were diminished by the PKA-inhibitor H89. Inhibition of the PKA-independent cAMP-mediators Epac1 and Epac2 with HJC0197 resulted in enhanced cartilage formation, which was additive to that of the mechanical stimulation, implying that the chondrogenesis-promoting effect of mechanical load was independent of Epac. At the same time, PP2A activity was reduced following mechanical load and treatments with the PP2A-inhibitor okadaic acid were able to mimic the effects of the intervention. Our results indicate that proper mechanical stimuli augment in vitro cartilage formation via promoting both differentiation and matrix production of chondrogenic cells, and the opposing regulation of the PKA/CREB-Sox9 and the PP2A signalling pathways is crucial in this phenomenon.

Urban mining: quality and quantity of recyclable and recoverable material mechanically and physically extractable from residual waste

The mechanically sorted dry fraction (MSDF) and Fines (<20mm) arising from the mechanical biological treatment of residual municipal solid waste (RMSW) contains respectively about 11% w/w each of recyclable and recoverable materials. Processing a large sample of MSDF in an existing full-scale mechanical sorting facility equipped with near infrared and 2-3 dimensional selectors led to the extraction of about 6% w/w of recyclables with respect to the RMSW weight. Maximum selection efficiency was achieved for metals, about 98% w/w, whereas it was lower for Waste Electrical and Electronic Equipment (WEEE), about 2% w/w. After a simulated lab scale soil washing treatment it was possible to extract about 2% w/w of inert exploitable substances recoverable as construction materials, with respect to the amount of RMSW. The passing curve showed that inert materials were mainly sand with a particle size ranging from 0.063 to 2mm. Leaching tests showed quite low heavy metal concentrations with the exception of the particles retained by the 0.5mm sieve. A minimum pollutant concentration was in the leachate from the 10 and 20mm particle size fractions.