26
|
Zhang Y, Zhou W, Peng W, Yao T, Zhang Y, Wang B, Cai H, Li B. Core@Double-Shell Engineering of Zn Particles toward Elevated Dielectric Properties: Multiple Polarization Mechanisms in Zn@Znch@PS/PVDF Composites. Macromol Rapid Commun 2024; 45:e2300585. [PMID: 37931222 DOI: 10.1002/marc.202300585] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2023] [Revised: 11/02/2023] [Indexed: 11/08/2023]
Abstract
Flexible dielectrics with large dielectric constant (ε') coupled with low loss are highly pursued in many applications. To bolster the ε' of raw Zn (zinc)/poly(vinylidene fluoride, PVDF) while maintaining pimping dielectric loss, in this study, the core@double-shell structured Zn@zinc carbonate (ZnCH)@polystyrene (PS) particles are first synthesized through a suspension polymerization of styrene, and then composited with PVDF to elevate the ε' and keep low loss of the composites. By optimizing the PS shells' thickness and tailoring the electrical resistivity of Zn@ZnCH@PS particles, both the slow inter-particle polarization and fast intra-particle polarization in the composites can be decoupled and synergistically tuned, thus, the Zn@ZnCH@PS/PVDF achieves a much higher ε' and lower dielectric loss, simultaneously, which far exceed the unmodified Zn/PVDF. Both experiment and theoretic calculation reveal that the double-shell ZnCH@PS not only induces and promotes multiple polarizations enhancing the composites' ε', especially at the optimized PS's thickness, but also maintains suppressed loss and conductivity thanks to their obvious barrier effect on long-range charge migration. The core@double-shell filler design strategy facilitates the development of polymer composites with desirable dielectric properties for applications in electronic and electrical power systems.
Collapse
|
27
|
Kim C, Kim T, Cho J. Selective Charge Carrier Transport and Bipolar Conduction in an Inorganic/Organic Bulk-Phase Composite: Optimization for Low-Temperature Thermoelectric Performance. ACS APPLIED MATERIALS & INTERFACES 2024; 16:5036-5049. [PMID: 38105489 PMCID: PMC10836361 DOI: 10.1021/acsami.3c11235] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/30/2023] [Revised: 11/22/2023] [Accepted: 12/01/2023] [Indexed: 12/19/2023]
Abstract
Abundant conducting polymers are promising organic substances for low-temperature thermoelectric applications due to their inherently low thermal conductivities. By introducing a conducting polymer filler (PEDOT:PSS─poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonic acid)) into a representative inorganic thermoelectric matrix (Bi2Te3), a bulk-phase composite (i.e., inorganic matrix/organic filler) for low-temperature thermoelectric applications is proposed. This composite hosts an interfacial energy barrier between the inorganic and organic components, facilitating controlled carrier transport based on its energy level, known as the energy filtering effect, and thus the composite exhibits a highly improved Seebeck coefficient compared to pristine Bi2Te3. The composite also displays a completely different temperature dependence on the Seebeck coefficient from Bi2Te3 due to its distinct bipolar conduction tendency. By regulation of the energy filtering effect and bipolar conduction tendency, the composite undergoes noticeable variations in the Seebeck coefficient, resulting in a significantly enhanced power factor. Furthermore, the composite shows a substantially reduced thermal conductivity compared to Bi2Te3 because it has lower carrier/lattice thermal contributions, possibly attributed to its high carrier/phonon scattering probabilities. Owing to the superior power factor and reduced thermal conductivity, the composite exhibits markedly enhanced thermoelectric performance, achieving a maximum figure of merit of approximately 1.26 at 380 K and an average figure of merit of approximately 1.23 in the temperature range of 323-423 K. The performance of the composite is competitive with previously reported n-type Bi2Te3 binary or ternary analogues. Therefore, the composite is highly expected to be a promising n-type counterpart of p-type Bi2Te3-based alloys for various low-temperature thermoelectric applications.
Collapse
|
28
|
Paci B, Righi Riva F, Generosi A, Guaragno M, Mangiacapre E, Brutti S, Wagner M, Distler A, Egelhaaf HJ. Semitransparent Organic Photovoltaic Devices: Interface/Bulk Properties and Stability Issues. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:269. [PMID: 38334540 PMCID: PMC10857079 DOI: 10.3390/nano14030269] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/15/2023] [Revised: 01/19/2024] [Accepted: 01/22/2024] [Indexed: 02/10/2024]
Abstract
In the present work, an insight on the morpho/structural properties of semitransparent organic devices for buildings' integrated photovoltaics is presented, and issues related to interface and bulk stability are addressed. The organic photovoltaic (OPV) cells under investigation are characterized by a blend of PM6:Y6 as a photo-active layer, a ZnO ETL (electron transporting layer), a HTL (hole transporting layer) of HTL-X and a transparent electrode composed by Ag nanowires (AgNWs). The devices' active nanomaterials, processed as thin films, and their mutual nanoscale interfaces are investigated by a combination of in situ Energy Dispersive X-ray Reflectometry (EDXR) and ex situ Atomic Force Microscopy (AFM), X-ray Diffraction (XRD) and micro-Raman spectroscopy. In order to discriminate among diverse concomitant aging pathways potentially occurring upon working conditions, the effects of different stress factors were investigated: light and temperature. Evidence is gained of an essential structural stability, although an increased roughness at the ZnO/PM6:Y6 interface is deduced by EDXR measurements. On the contrary, an overall stability of the system subjected to thermal stress in the dark was observed, which is a clear indication of the photo-induced origin of the observed degradation phenomenon. Micro-Raman spectroscopy brings light on the origin of such effect, evidencing a photo-oxidation process of the active material in the device, using hygroscopic organic HTL, during continuous illumination in ambient moisture conditions. The process may be also triggered by a photocatalytic role of the ZnO layer. Therefore, an alternative configuration is proposed, where the hygroscopic HTL-X is replaced by the inorganic compound MoOx. The results show that such alternative configuration is stable under light stress (solar simulator), suggesting that the use of Molybdenum Oxide, limiting the photo-oxidation of the bulk PM6:Y6 active material, can prevent the cell from degradation.
Collapse
|
29
|
Mallet N, Müller J, Pezard J, Cristiano F, Makarem R, Fazzini PF, Lecestre A, Larrieu G. Metallic Nanoalloys on Vertical GaAs Nanowires: Growth Mechanisms and Shape Control of Ni-GaAs Compounds. ACS APPLIED MATERIALS & INTERFACES 2024; 16:2449-2456. [PMID: 38117013 DOI: 10.1021/acsami.3c09689] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/21/2023]
Abstract
GaAs nanowires are promising candidates for emerging devices in a broad field of applications (e.g., nanoelectronics, photodetection, or photoconversion). These nanostructures benefit greatly from a vertical integration, as it allows for the exhibition of the entire nanowire surface. However, one of the main challenges related to vertical integration is the conception of an efficient method to create low resistive contacts at nanoscale without degrading the device performance. In this article, we propose a complementary metal-oxide-semiconductor (CMOS)-compatible approach to form alloyed contacts at the extremities of vertical GaAs nanowires. Ni-based and Pd-based alloys on different vertical GaAs nanostructures have been characterized by structural and chemical analyses to identify the phase and to study the growth mechanisms involved at the nanoscale. It is shown that the formation of the Ni3GaAs alloy on top of nanowires following the epitaxial relation Ni3GaAs(0001)∥GaAs(111) leads to a pyramidal shape with four faces. Finally, guidelines are presented to tune the shape of this alloy by varying the initial metal thickness and nanowire diameters. It will facilitate the fabrication of a nanoalloy structure with tailored shape characteristics to precisely align with a designated application.
Collapse
|
30
|
Fakhrul T, Khurana B, Lee BH, Huang S, Nembach HT, Beach GSD, Ross CA. Damping and Interfacial Dzyaloshinskii-Moriya Interaction in Thulium Iron Garnet/Bismuth-Substituted Yttrium Iron Garnet Bilayers. ACS APPLIED MATERIALS & INTERFACES 2024; 16:2489-2496. [PMID: 38180749 DOI: 10.1021/acsami.3c14706] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/06/2024]
Abstract
Thin films of ferrimagnetic iron garnets can exhibit useful magnetic properties, including perpendicular magnetic anisotropy (PMA) and high domain wall velocities. In particular, bismuth-substituted yttrium iron garnet (BiYIG) films grown on garnet substrates have a low Gilbert damping but zero Dzyaloshinskii-Moriya interaction (DMI), whereas thulium iron garnet (TmIG) films have higher damping but a nonzero DMI. We report the damping and DMI of thulium-substituted BiYIG (BiYTmIG) and TmIG|BiYIG bilayer thin films deposited on (111) substituted gadolinium gallium garnet and neodymium gallium garnet (NGG) substrates. The films are epitaxial and exhibit PMA. BiYIG|TmIG bilayers have a damping value that is an order of magnitude lower than that of TmIG, and BiYIG|TmIG|NGG have DMI of 0.0145 ± 0.0011 mJ/m2, similar to that of TmIG|NGG. The bilayer therefore provides a combination of DMI and moderate damping, useful for the development of high-speed spin orbit torque-driven devices.
Collapse
|
31
|
Jun S, Lee G, Song YB, Lim H, Baeck KH, Lee ES, Kim JY, Kim DW, Park JH, Jung YS. Interlayer Engineering and Prelithiation: Empowering Si Anodes for Low-Pressure-Operating All-Solid-State Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2309437. [PMID: 38221689 DOI: 10.1002/smll.202309437] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2023] [Revised: 11/23/2023] [Indexed: 01/16/2024]
Abstract
Silicon (Si) anodes, free from the dendritic growth concerns found in lithium (Li) metal anodes, offer a promising alternative for high-energy all-solid-state batteries (ASSBs). However, most advancements in Si anodes have been achieved under impractical high operating pressures, which can mask detrimental electrochemo-mechanical issues. Herein, we effectively address the challenges related to the low-pressure operation of Si anodes in ASSBs by introducing an silver (Ag) interlayer between the solid electrolyte layer (Li6 PS5 Cl) and anode and prelithiating the anodes. The Si composite electrodes, consisting of Si/polyvinylidene fluoride/carbon nanotubes, are optimized for suitable mechanical properties and electrical connectivity. Although the impact of the Ag interlayer is insignificant at an exceedingly high operating pressure of 70 MPa, it substantially enhances the interfacial contacts under a practical low operating pressure of 15 MPa. Thus, Ag-coated Si anodes outperform bare Si anodes (discharge capacity: 2430 vs 1560 mA h g-1 ). The robust interfacial contact is attributed to the deformable, adhesive properties and protective role of the in situ lithiated Ag interlayer, as evidenced by comprehensive ex situ analyses. Operando electrochemical pressiometry is used effectively to probe the strong interface for Ag-coated Si anodes. Furthermore, prelithiation through the thermal evaporation deposition of Li metal significantly improves the cycling performance.
Collapse
|
32
|
Ma Z, Chatzichristodoulou C, Dacayan WL, Mølhave KS, Chiabrera FM, Smitshuysen TEL, Damsgaard CD, Simonsen SB. Experimental Requirements for High-Temperature Solid-State Electrochemical TEM Experiments. SMALL METHODS 2024:e2301356. [PMID: 38195885 DOI: 10.1002/smtd.202301356] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 12/06/2023] [Indexed: 01/11/2024]
Abstract
The ability to perform both electrochemical and structural/elemental characterization in the same experiment and at the nanoscale allows to directly link electrochemical performance to the material properties and their evolution over time and operating conditions. Such experiments can be important for the further development of solid oxide cells, solid-state batteries, thermal electrical devices, and other solid-state electrochemical devices. The experimental requirements for conducting solid-state electrochemical TEM experiments in general, including sample preparation, electrochemical measurements, failure factors, and possibilities for optimization, are presented and discussed. Particularly, the methodology of performing reliable electrochemical impedance spectroscopy measurements in reactive gases and at elevated temperatures for both single materials and solid oxide cells is described. The presented results include impedance measurements of electronic conductors, an ionic conductor, and a mixed ionic and electronic conductor, all materials typically applied in solid oxide fuel and electrolysis cells. It is shown that how TEM and impedance spectroscopy can be synergically integrated to measure the transport and surface exchange properties of materials with nanoscale dimensions and to visualize their structural and elemental evolution via TEM/STEM imaging and spectroscopy.
Collapse
|
33
|
Lee D, Cui Z, Goodenough JB, Manthiram A. Interphase Stabilization of LiNi 0.5 Mn 1.5 O 4 Cathode for 5 V-Class All-Solid-State Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306053. [PMID: 37658500 DOI: 10.1002/smll.202306053] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2023] [Revised: 07/31/2023] [Indexed: 09/03/2023]
Abstract
Employing high voltage cobalt-free spinel LiNi0.5 Mn1.5 O4 (LNMO) as a cathode is promising for high energy density and cost-effectiveness, but it has challenges in all-solid-state batteries (ASSBs). Here, it is revealed that the limitation of lithium argyrodite sulfide solid electrolyte (Li6 PS5 Cl) with the LNMO cathode is due to the intrinsic chemical incompatibility and poor oxidative stability. Through a careful analysis of the interphase of LNMO, it is elucidated that even the halide solid electrolyte (Li3 InCl6 ) with high oxidative stability can be decomposed to form resistive interphase layers with LNMO in ASSBs. Interestingly, with Fe-doping and a Li3 PO4 protective layer coating, LNMO with Li3 InCl6 displays stable cycle performance with a stabilized interphase at a high voltage (≈4.7 V) in ASSBs. The enhanced interfacial stability with the extended electrochemical stability window through doping and coating enables high electrochemical stability with LNMO in ASSBs. This work provides guidance for employing high-voltage cathodes in ASSBs and highlights the importance of stable interphases to enable stable cycling in ASSBs.
Collapse
|
34
|
Li X, Liu H, Lin Z, Richardson JJ, Xie W, Chen F, Lin W, Caruso F, Zhou J, Liu B. Cytoprotective Metal-Phenolic Network Sporulation to Modulate Microalgal Mobility and Division. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2308026. [PMID: 38014599 PMCID: PMC10797472 DOI: 10.1002/advs.202308026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/24/2023] [Indexed: 11/29/2023]
Abstract
Synthetic cell exoskeletons created from abiotic materials have attracted interest in materials science and biotechnology, as they can regulate cell behavior and create new functionalities. Here, a facile strategy is reported to mimic microalgal sporulation with on-demand germination and locomotion via responsive metal-phenolic networks (MPNs). Specifically, MPNs with tunable thickness and composition are deposited on the surface of microalgae cells via one-step coordination, without any loss of cell viability or intrinsic cell photosynthetic properties. The MPN coating keeps the cells in a dormant state, but can be disassembled on-demand in response to environmental pH or chemical stimulus, thereby reviving the microalgae within 1 min. Moreover, the artificial sporulation of microalgae resulted in resistance to environmental stresses (e.g., metal ions and antibiotics) akin to the function of natural sporulation. This strategy can regulate the life cycle of complex cells, providing a synthetic strategy for designing hybrid microorganisms.
Collapse
|
35
|
Zhu J, Yang M, Hu Y, Yao M, Chen J, Niu Z. The Construction of Binary Phase Electrolyte Interface for Highly Stable Zinc Anodes. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2304426. [PMID: 37555530 DOI: 10.1002/adma.202304426] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2023] [Revised: 08/03/2023] [Indexed: 08/10/2023]
Abstract
Metal zinc is a promising anode candidate of aqueous zinc-ion batteries due to high theoretical capacity, low cost, and high safety. However, it often suffers from hydrogen evolution reaction (HER), dendrite growth, and formation of by-products. Herein, a triethyl phosphate (TEP)/H2 O binary phase electrolyte (BPE) interface is developed by introducing TEP-based electrolyte-wetted hydrophobic polypropylene (PP) separator onto the Zn anode surface. The equilibrium of the BPE interface depends on the comparable surface tensions of H2 O-based and TEP-based electrolytes on hydrophobic PP separator surfaces. The BPE interface induces Zn2+ solvation structure conversion from [Zn(H2 O)x ]2+ to [Zn(TEP)n (H2 O)y ]2+ , where most solvated H2 O molecules are removed. In [Zn(TEP)n (H2 O)y ]2+ , the residual H2 O molecules can be further constrained by the formation of H bonds between TEP and H2 O molecules. Consequently, the ionization of solvated H2 O molecules is effectively suppressed, and HER and by-products are effectively restricted on Zn anode surfaces in BPE. As a result, Zn anodes exhibit a high Coulombic efficiency of 99.12% and superior cycling performance of 6000 h, which is much higher than the case in single-phase aqueous electrolytes. To illustrate the feasibility of BPE in full cells, the Zn/Alx V2 O5 batteries are assembled based on the BPE and exhibited enhanced cycling performance.
Collapse
|
36
|
Chen R, Meng L, Xu W, Li L. Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2304807. [PMID: 37653598 DOI: 10.1002/smll.202304807] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2023] [Revised: 07/31/2023] [Indexed: 09/02/2023]
Abstract
Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.
Collapse
|
37
|
Yang IS, Dai Z, Ranka A, Chen D, Zhu K, Berry JJ, Guo P, Padture NP. Simultaneous Enhancement of Efficiency and Operational-Stability of Mesoscopic Perovskite Solar Cells via Interfacial Toughening. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2308819. [PMID: 37832157 DOI: 10.1002/adma.202308819] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2023] [Revised: 10/04/2023] [Indexed: 10/15/2023]
Abstract
The combined effects of compact TiO2 (c-TiO2 ) electron-transport layer (ETL) are investigated without and with mesoscopic TiO2 (m-TiO2 ) on top, and without and with an iodine-terminated silane self-assembled monolayer (SAM), on the mechanical behavior, opto-electronic properties, photovoltaic (PV) performance, and operational-stability of solar cells based on metal-halide perovskites (MHPs). The interfacial toughness increases almost threefold in going from c-TiO2 without SAM to m-TiO2 with SAM. This is attributed to the synergistic effect of the m-TiO2 /MHP nanocomposite at the interface and the enhanced adhesion afforded by the iodine-terminated silane SAM. The combination of m-TiO2 and SAM also offers a significant beneficial effect on the photocarriers extraction at the ETL/MHP interface, resulting in perovskite solar cells (PSCs) with power-conversion efficiency (PCE) of over 24% and 20% for 0.1 and 1 cm2 active areas, respectively. These PSCs also have exceptionally long operational-stability lives: extrapolated T80 (duration at 80% initial PCE retained) is ≈18 000 and 10 000 h for 0.1 and 1 cm2 active areas, respectively. Postmortem characterization and analyses of the operational-stability-tested PSCs are performed to elucidate the possible mechanisms responsible for the long operational-stability.
Collapse
|
38
|
Xie Y, Chang J, Zheng P, Zhang L, Xie T, Jiang R, Zhang Z, Yang Y, Zou M, Yin L, Zhen C, Han F, Ba K, Xu G. Evidence for an Interface of Hybrid Cocatalysts Favoring Photocatalytic Hydrogen Evolution Kinetics. ACS APPLIED MATERIALS & INTERFACES 2023; 15:59309-59318. [PMID: 37902621 DOI: 10.1021/acsami.3c10097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/31/2023]
Abstract
Hybrid cocatalysts have great application potential for improving the photocatalytic hydrogen evolution performance of semiconductors. The interfaces between components of hybrid cocatalysts make a great contribution to the improvement, but the associated mechanisms remain unclear. Herein, we prepared and tested three comparative CdS-based photocatalysts with NiS, NiS/Ni9S8, and Ni9S8 as the cocatalysts separately. The emphasis is placed on investigating the effect of the NiS/Ni9S8 interfaces on the photocatalytic hydrogen evolution performance of CdS. NiS/Ni9S8 exhibits a higher ability than NiS and Ni9S8 in making CdS a more active photocatalyst for water splitting. It shows that NiS, NiS/Ni9S8, and Ni9S8 perform similarly in terms of promoting the charge transfer and separation of CdS based on steady-state and time-resolved photoluminescence studies. At the same time, the linear sweep voltammetry and electrochemical impedance spectroscopy tests combined with the density functional theory calculations reveal that the component interfaces of NiS/Ni9S8 enable us to lower the water splitting activation energy, the charge-transfer resistance from the cocatalyst to sacrificial agent, and hydrogen adsorption Gibbs free energy. It is evidenced from this work that component interfaces of hybrid cocatalysts play a vital role in accelerating the dynamics of hydrogen evolution reactions.
Collapse
|
39
|
Alcántara R, Lavela P, Edström K, Fichtner M, Le TK, Floraki C, Aivaliotis D, Vernardou D. Metal-Ion Intercalation Mechanisms in Vanadium Pentoxide and Its New Perspectives. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:3149. [PMID: 38133046 PMCID: PMC10746094 DOI: 10.3390/nano13243149] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/27/2023] [Revised: 12/11/2023] [Accepted: 12/12/2023] [Indexed: 12/23/2023]
Abstract
The investigation into intercalation mechanisms in vanadium pentoxide has garnered significant attention within the realm of research, primarily propelled by its remarkable theoretical capacity for energy storage. This comprehensive review delves into the latest advancements that have enriched our understanding of these intricate mechanisms. Notwithstanding its exceptional storage capacity, the compound grapples with challenges arising from inherent structural instability. Researchers are actively exploring avenues for improving electrodes, with a focus on innovative structures and the meticulous fine-tuning of particle properties. Within the scope of this review, we engage in a detailed discussion on the mechanistic intricacies involved in ion intercalation within the framework of vanadium pentoxide. Additionally, we explore recent breakthroughs in understanding its intercalation properties, aiming to refine the material's structure and morphology. These refinements are anticipated to pave the way for significantly enhanced performance in various energy storage applications.
Collapse
|
40
|
Brunner P, Würschum R. Diffusion-reaction model of positron annihilation for complex defect pattern. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2023; 36:125703. [PMID: 38098320 DOI: 10.1088/1361-648x/ad1279] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/28/2023] [Accepted: 12/05/2023] [Indexed: 02/01/2024]
Abstract
The increasing structural complexity in modern material science is often associated with grain sizes in theµm- and the sub-µm-regime. Therefore, when positron annihilation is applied for studying free-volume type defects in such materials, positron trapping at grain boundaries (GBs) cannot be neglected, even when other defect types are in the primary focus. For this purpose, the available diffusion-reaction model for positron trapping and annihilation at GBs is extended to competitive trapping at two different types of intragranular defects. Closed-form expressions for the mean positron lifetime and the relative intensities of the defect-specific positron lifetime components are given. The model is presented for cylindrical-shaped crystallites, but is valid in the general sense for spherical symmetry as well with appropriate replacements. The model yields the basis for properly determining defect concentrations, even for the inconvenient but common case that one intragranular defect type exhibits a lifetime component similar to that in GBs. It turns out, that positron trapping at GBs matters even forµm-sized crystallites and should not be neglected for precise studies of intragranular defects.
Collapse
|
41
|
Intan NN, Pfaendtner J. Role of Surface Features on the Initial Dissolution of CH 3NH 3PbI 3 Perovskite in Liquid Water: An Ab Initio Molecular Dynamics Study. ACS NANO 2023; 17:22371-22387. [PMID: 37943082 DOI: 10.1021/acsnano.3c04601] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/10/2023]
Abstract
The degradation of CH3NH3PbI3 (MAPbI3) hybrid organic inorganic perovskite (HOIP) by water has been the major issue hampering its use in commercial perovskites solar cells (PSCs), as MAPbI3 HOIP has been known to easily degrade in the presence of water. Even though there have been numerous studies investigating this phenomenon, there is still no consensus on the mechanisms of the initial stages of dissolution. Here, we attempt to consolidate differing mechanistic interpretations previously reported in the literature through the use of the first-principles constrained ab initio molecular dynamics (AIMD) to study both the energetics and mechanisms that accompany the degradation of MAPbI3 HOIP in liquid water. By comparing the dissolution free energy barrier between surface species of different surficial types, we find that the dominant dissolution mechanisms of surface species vary widely based on the specific surface features. The high sensitivity of the dissolution mechanism to surface features has contributed to the many dissolution mechanisms proposed in the literature. In contrast, the dissolution free energy barriers are mainly determined by the dissolving species rather than the type of surfaces, and the type of surfaces the ions are dissolving from is inconsequential toward the dissolution free energy barrier. However, the presence of surface defects such as vacancy sites is found to significantly lower the dissolution free energy barriers. Based on the estimated dissolution free energy barriers, we propose that the dissolution of MAPbI3 HOIP in liquid water originates from surface defect sites that propagate laterally along the surface layer of the MAPbI3 HOIP crystal.
Collapse
|
42
|
Zhang M, Feng Q, Li S, Nan G. Role of Dipolar Organic Cations on Light-triggered Charge Transfer at TiO 2 /CH 3 NH 3 PbI 3 Interfaces. Chemphyschem 2023; 24:e202300376. [PMID: 37584533 DOI: 10.1002/cphc.202300376] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2023] [Revised: 08/11/2023] [Accepted: 08/16/2023] [Indexed: 08/17/2023]
Abstract
The TiO2 /MAPbI3 (MA=CH3 NH3 ) interfaces have manifested correlation with current-voltage hysteresis in perovskite solar cells (PSCs) under light illumination conditions, but the relations between the photo-induced charge transfer and the collective polarization response of the dipolar MA cations are largely unexplored. In this work, we adopt density functional theory (DFT) and time-dependent DFT approach to study the light-triggered charge transfer across the TiO2 /MAPbI3 interfaces with MAI- and PbI-exposed terminations. It is found that regardless of the surface exposure of the MAPbI3 , the photo-induced charge transfer varies when going from the ground-state geometries to the excited-state configurations. Besides, thanks to the electrostatic interactions between the ends of MA cations and the photogenerated electrons, the photo-induced charge transfer across the interfaces is enhanced (weakened) by the negatively (positively) charged CH3 (NH3 ) moieties of the MA species. Resultantly, the positively charged iodine vacancies at the TiO2 /MAPbI3 interfaces tend to inhibit the charge transfer induced by light. Combining with the energy level alignment which is significantly modulated by the orientation of the MA species at the interfaces, the dipolar MA cations might be a double-edge sword for the hysteresis in PSCs with the TiO2 /MAPbI3 interfaces.
Collapse
|
43
|
Bekaert L, Akatsuka S, Tanibata N, De Proft F, Hubin A, Mamme MH, Nakayama M. Increasing the Sodium Metal Electrode Compatibility with the Na 3 PS 4 Solid-State Electrolyte through Heteroatom Substitution. CHEMSUSCHEM 2023; 16:e202300676. [PMID: 37394689 DOI: 10.1002/cssc.202300676] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Revised: 06/24/2023] [Accepted: 06/29/2023] [Indexed: 07/04/2023]
Abstract
Rechargeable batteries are essential to the global shift towards renewable energy sources and their storage. At present, improvements in their safety and sustainability are of great importance as part of global sustainable development goals. A major contender in this shift are rechargeable solid-state sodium batteries, as a low-cost, safe, and sustainable alternative to conventional lithium-ion batteries. Recently, solid-state electrolytes with a high ionic conductivity and low flammability have been developed. However, these still face challenges with the highly reactive sodium metal electrode. The study of these electrolyte-electrode interfaces is challenging from a computational and experimental point of view, but recent advances in molecular dynamics neural-network potentials are finally enabling access to these environments compared to more computationally expensive conventional ab-initio techniques. In this study, heteroatom-substituted Na3 PS3 X1 analogues, where X is sulfur, oxygen, selenium, tellurium, nitrogen, chlorine, and fluorine, are investigated using total-trajectory analysis and neural-network molecular dynamics. It was found that inductive electron-withdrawing and electron-donating effects, alongside differences in heteroatom atomic radius, electronegativity, and valency, influenced the electrolyte reactivity. The Na3 PS3 O1 oxygen analogue was found to have superior chemical stability against the sodium metal electrode, paving the way towards high-performance, long lifetime and reliable rechargeable solid-state sodium batteries.
Collapse
|
44
|
Goswami R, Moser A, Pande CS. Mitigating the Recrystallization of a Cold-Worked Cu-Al 2O 3 Nanocomposite via Enhanced Zener Drag by Nanocrstalline Cu-Oxide Particles. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2727. [PMID: 37836368 PMCID: PMC10574739 DOI: 10.3390/nano13192727] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2023] [Revised: 09/27/2023] [Accepted: 10/03/2023] [Indexed: 10/15/2023]
Abstract
The strength of metals and alloys at elevated temperatures typically decreases due to the recovery, recrystallization, grain growth, and growth of second-phase particles. We report here a cold-worked Cu-Al2O3 composite did not recrystallize up to a temperature of 0.83Tm of Cu. The composite was manufactured through the internal oxidation process of dilute Cu-0.15 wt.% Al alloy and was characterized by transmission electron microscopy to study the nature of oxide precipitates. As a result of internal oxidation, a small volume fraction (1%) of Al2O3 particles forms. In addition, a high density of extremely fine (2-5 nm) Cu2O particles has been observed to form epitaxially within the elongated Cu grains. These finely dispersed second-phase Cu2O particles enhance the Zener drag significantly by three orders of magnitude as compared to Al2O3 particles and retain their original size and spacing at elevated temperatures. This limits the grain boundary migration and the nucleation of defect-free regions of different orientations and inhibits the recrystallization process at elevated temperatures. In addition, due to the limited grain boundary migration, a bundle of stacking faults appears instead of annealing twins. This investigation has led to a better understanding of how to prevent the recrystallization process of heavily deformed metallic material containing oxide particles.
Collapse
|
45
|
Yang K, Zhang X, Venkataraman M, Wiener J, Tan X, Zhu G, Yao J, Militky J. Sandwich Fibrous PEG Encapsulations for Thermal Energy Storage. Chemphyschem 2023; 24:e202300234. [PMID: 37428636 DOI: 10.1002/cphc.202300234] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2023] [Revised: 06/30/2023] [Accepted: 07/10/2023] [Indexed: 07/12/2023]
Abstract
Phase change materials (PCMs) textiles have been developed for personal thermal management (PTM) while limited loading amount of PCMs in textiles reduced thermal buffering effect. In this work, we proposed a sandwich fibrous encapsulation to store polyethylene glycol (PEG) with PEG loading amount of 45 wt %, which consisted of polyester (PET) fabrics with hydrophobic coating as protection layers, polyurethane (PU) nanofibrous membranes as barrier layers and PEG-loaded viscose fabric as a PCM-loaded layer. The leakage was totally avoided by controlling weak interfacial adhesion between protection layer and melting PEG. The sandwich fibrous PEG encapsulations had an overall melting enthalpy value ranging from 50 J/g to 78 J/g and melting points ranging from 20 °C to 63 °C by using different PEGs. Besides, introduction of Fe microparticles in PCM-loaded layer enhanced thermal energy storage efficiency. We believe that the sandwich fibrous PEG encapsulation has a great potential in various fields.
Collapse
|
46
|
He F, Hou M, Du Z, Zhu F, Cao X, Ding Y, Zhou Y, Liu M, Chen Y. Self-Construction of Efficient Interfaces Ensures High-Performance Direct Ammonia Protonic Ceramic Fuel Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2304957. [PMID: 37640369 DOI: 10.1002/adma.202304957] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Revised: 08/18/2023] [Indexed: 08/31/2023]
Abstract
Direct ammonia protonic ceramic fuel cells (PCFCs) are highly efficient energy conversion devices since ammonia as a carbon-neutral hydrogen-rich carrier shows great potential for storage and long-distance transportation when compared with hydrogen fuel. However, traditional Ni-based anodes readily suffer from severe structural destruction and dramatic deactivation after long-time exposure to ammonia. Here a Sr2 Fe1.35 Mo0.45 Cu0.2 O6-δ (SFMC) anode catalytic layer (ACL) painted onto a Ni-BaZr0.1 Ce0.7 Y0.1 Yb0.1 O3- δ (BZCYYb) anode with enhanced catalytic activity and durability toward the direct utilization of ammonia is reported. A tubular Ni-BZCYYb anode-supported cells with the SFMC ACL show excellent peak power densities of 1.77 W cm-2 in wet H2 (3% H2 O) and 1.02 W cm-2 in NH3 at 650 °C. A relatively stable operation of the cells is obtained at 650 °C for 200 h in ammonia fuel. Such achieved improvements in the activity and durability are attributed to the self-constructed interfaces with the phases of NiCu or/and NiFe for efficient NH3 decomposition, resulting in a strong NH3 adsorption strength of the SFMC, as confirmed by NH3 thermal conversion and NH3 -temperature programmed desorption. This research offers a valuable strategy of applying an internal catalytic layer for highly active and durable ammonia PCFCs.
Collapse
|
47
|
Jia B, Li L, Xue C, Kang J, Liu LM, Guo T, Wang Z, Huang Q, Guo S. Restraining Interfacial Cu 2+ by using Amorphous SnO 2 as Sacrificial Protection Boosts CO 2 Electroreduction. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2305587. [PMID: 37545026 DOI: 10.1002/adma.202305587] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/11/2023] [Revised: 07/17/2023] [Indexed: 08/08/2023]
Abstract
The electrochemical carbon dioxide reduction reaction (CO2 RR) to formate is of great interest in the field of electrochemical energy. Cu-based material is an appealing electrocatalyst for the CO2 RR. However, retaining Cu2+ under the high cathodic potential of CO2 RR remains a great challenge, leading to low electrocatalytic selectivity, activity, and stability. Herein, inspired by corrosion science, a sacrificial protection strategy to stabilize interfacial crystalline CuO through embedding of active amorphous SnO2 (c-CuO/a-SnO2 ) is reported, which greatly boosts the electrocatalytic sensitivity, activity, and stability for CO2 RR to formate. The as-made hybrid catalyst can achieve superior high selectivity for CO2 RR to formate with a remarkable Faradaic efficiency (FE) of 96.7%, and a superhigh current density of over 1 A cm-2 that far outperforms industrial benchmarks (FE > 90%, current density > 300 mA cm-2 ). In situ X-ray absorption spectroscopy (XAS) and X-ray diffractionexperimental and theoretical calculation results reveal that the broadened s-orbital in interfacial a-SnO2 offers the lower orbital for extra electrons than Cu2+ , which can effectively retain nearby Cu2+ , and the high active interface significantly lowers the energy barrier of the limited step (* CO2 → * HCOO) and enhances the selectivity and activity for CO2 RR to formate.
Collapse
|
48
|
Chen C, Zhang L, Wang N, Sun D, Yang Z. Janus Composite Particles and Interfacial Catalysis Thereby. Macromol Rapid Commun 2023; 44:e2300280. [PMID: 37335979 DOI: 10.1002/marc.202300280] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 06/10/2023] [Indexed: 06/21/2023]
Abstract
Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.
Collapse
|
49
|
Afshinpour M, Smith LA, Chakravarty S. AQcalc: A web server that identifies weak molecular interactions in protein structures. Protein Sci 2023; 32:e4762. [PMID: 37596782 PMCID: PMC10503417 DOI: 10.1002/pro.4762] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Revised: 07/25/2023] [Accepted: 08/15/2023] [Indexed: 08/20/2023]
Abstract
Weak molecular interactions play an important role in protein structure and function. Computational tools that identify weak molecular interactions are, therefore, valuable for the study of proteins. Here, we present AQcalc, a web server (https://aqcalcbiocomputing.com/) that can be used to identify anion-quadrupole (AQ) interactions, which are weak interactions involving aromatic residue (Trp, Tyr, and Phe) ring edges and anions (Asp, Glu, and phosphate ion) both within proteins and at their interfaces (protein-protein, protein-nucleic acids, and protein-lipid bilayer). AQcalc identifies AQ interactions as well as clusters involving AQ, cation-π, and salt bridges, among others. Utilizing AQcalc we analyzed weak interactions in protein models, even in the absence of experimental structures, to understand the contributions of weak interactions to deleterious structural changes, including those associated with oncogenic and germline disease variants. We identified several deleterious variants with disrupted AQ interactions (comparable in frequency to cation-π disruptions). Amyloid fibrils utilize AQ to bury anions at frequencies that far exceed those observed for globular proteins. AQ interactions were detected three and five times more frequently than the hydrogen-bonded AQ (HBAQ) in fibril structures and protein-lipid bilayer interfaces, respectively. By contrast, AQ and HBAQ interactions were detected with similar frequencies in globular proteins. Collectively, these findings suggest AQcalc will be effective in facilitating fine structural analysis. As other web utilities designed to identify protein residue interaction networks do not report AQ interactions, wide use of AQcalc will enrich our understanding of residue interaction networks and facilitate hypothesis testing by identifying and experimentally characterizing these comparably weak but important interactions.
Collapse
|
50
|
Kumral B, Demingos PG, Cui T, Serles P, Barri N, Singh CV, Filleter T. Defect Engineering of Graphene for Dynamic Reliability. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2302145. [PMID: 37291948 DOI: 10.1002/smll.202302145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2023] [Revised: 05/12/2023] [Indexed: 06/10/2023]
Abstract
The interface between two-dimensional (2D) materials and soft, stretchable polymeric substrates is a governing criterion in proposed 2D materials-based flexible devices. This interface is dominated by weak van der Waals forces and there is a large mismatch in elastic constants between the contact materials. Under dynamic loading, slippage, and decoupling of the 2D material is observed, which then leads to extensive damage propagation in the 2D lattice. Herein, graphene is functionalized through mild and controlled defect engineering for a fivefold increase in adhesion at the graphene-polymer interface. Adhesion is characterized experimentally using buckling-based metrology, while molecular dynamics simulations reveal the role of individual defects in the context of adhesion. Under in situ cyclic loading, the increased adhesion inhibits damage initiation and interfacial fatigue propagation within graphene. This work offers insight into achieving dynamically reliable and robust 2D material-polymer contacts, which can facilitate the development of 2D materials-based flexible devices.
Collapse
|