51
|
Cheng MH, Hsu YC, Chang CW, Ko HW, Chung PY, Chen JT. Blending Homopolymers for Controlling the Morphology Transitions of Block Copolymer Nanorods Confined in Cylindrical Nanopores. ACS APPLIED MATERIALS & INTERFACES 2017; 9:21010-21016. [PMID: 28558189 DOI: 10.1021/acsami.7b05415] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
The microphase separation of block copolymers in confined geometries has been widely investigated over the last few decades. The controllability and versatility of the confinement-induced morphologies, however, are still difficult to be achieved because of the limited experimental parameters in the process of fabricating the confined nanostructures. In this work, we study the morphology transitions of lamellae-forming polystyrene-block-polydimethylsiloxane (PS-b-PDMS) nanorods confined in the nanopores of anodic aluminum oxide (AAO) templates. The nanorods are formed by solvent-assisted template wetting, and the morphologies are compared to those in the bulk state. By blending PS-b-PDMS with homopolystyrene (hPS), the morphologies of the nanorods can be controlled because of the changes of the effective volume fractions. Special morphology transitions from concentric lamellar morphology, to multihelical morphology, and finally to spherical-like morphology are observed by increasing the weight ratios of hPS. hPS with different molecular weights is also applied to investigate the effect of hPS on the morphologies of the PS-b-PDMS/hPS blend nanostructures. The unusual morphologies are further confirmed by a selective removal process, which also generates nanochannels for possible refilling with functional materials.
Collapse
|
52
|
Riccomagno E, Shayganpour A, Salerno M. Optimization of Anodic Porous Alumina Fabricated from Commercial Aluminum Food Foils: A Statistical Approach. MATERIALS (BASEL, SWITZERLAND) 2017; 10:E417. [PMID: 28772776 PMCID: PMC5506948 DOI: 10.3390/ma10040417] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/29/2017] [Revised: 04/08/2017] [Accepted: 04/12/2017] [Indexed: 12/18/2022]
Abstract
Anodic porous alumina is a known material based on an old industry, yet with emerging applications in nanoscience and nanotechnology. This is promising, but the nanostructured alumina should be fabricated from inexpensive raw material. We fabricated porous alumina from commercial aluminum food plate in 0.4 M aqueous phosphoric acid, aiming to design an effective manufacturing protocol for the material used as nanoporous filler in dental restorative composites, an application demonstrated previously by our group. We identified the critical input parameters of anodization voltage, bath temperature and anodization time, and the main output parameters of pore diameter, pore spacing and oxide thickness. Scanning electron microscopy and grain analysis allowed us to assess the nanostructured material, and the statistical design of experiments was used to optimize its fabrication. We analyzed a preliminary dataset, designed a second dataset aimed at clarifying the correlations between input and output parameters, and ran a confirmation dataset. Anodization conditions close to 125 V, 20°C, and 7 h were identified as the best for obtaining, in the shortest possible time, pore diameters and spacing of 100-150 nm and 150-275 nm respectively, and thickness of 6-8 µm, which are desirable for the selected application according to previously published results. Our analysis confirmed the linear dependence of pore size on anodization voltage and of thickness on anodization time. The importance of proper control on the experiment was highlighted, since batch effects emerge when the experimental conditions are not exactly reproduced.
Collapse
|
53
|
Rea I, Terracciano M, De Stefano L. Synthetic vs Natural: Diatoms Bioderived Porous Materials for the Next Generation of Healthcare Nanodevices. Adv Healthc Mater 2017; 6. [PMID: 28026914 DOI: 10.1002/adhm.201601125] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2016] [Revised: 11/04/2016] [Indexed: 12/13/2022]
Abstract
Nanostructured porous materials promise a next generation of innovative devices for healthcare and biomedical applications. The fabrication of such materials generally requires complex synthesis procedures, not always available in laboratories or sustainable in industries, and has adverse environmental impact. Nanosized porous materials can also be obtained from natural resources, which are an attractive alternative approach to man-made fabrication. Biogenic nanoporous silica from diatoms, and diatomaceous earths, constitutes largely available, low-cost reservoir of mesoporous nanodevices that can be engineered for theranostic applications, ranging from subcellular imaging to drug delivery. In this progress report, main experiences on nature-derived nanoparticles with healthcare and biomedical functionalities are reviewed and critically analyzed in search of a new collection of biocompatible porous nanomaterials.
Collapse
|
54
|
Huber TR, Hartje LF, McPherson EC, Kowalski AE, Snow CD. Programmed Assembly of Host-Guest Protein Crystals. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2017; 13:1602703. [PMID: 27925463 DOI: 10.1002/smll.201602703] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/15/2016] [Revised: 10/28/2016] [Indexed: 06/06/2023]
Abstract
The binding and release of guest fluorescent proteins inside a protein crystal with 13 nm axial pores is controlled. Spatially segregated guest protein loading is achieved via sequential binding and release stages. Additionally, selective stabilization of the crystal exterior results in hollow crystalline shells.
Collapse
|
55
|
Dolai S, Bhunia SK, Beglaryan SS, Kolusheva S, Zeiri L, Jelinek R. Colorimetric Polydiacetylene-Aerogel Detector for Volatile Organic Compounds (VOCs). ACS APPLIED MATERIALS & INTERFACES 2017; 9:2891-2898. [PMID: 28029773 DOI: 10.1021/acsami.6b14469] [Citation(s) in RCA: 84] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
A new hybrid system comprising polydiacetylene (PDA), a chromatic conjugated polymer, embedded within aerogel pores has been constructed. The PDA-aerogel powder underwent dramatic color changes in the presence of volatile organic compounds (VOCs), facilitated through infiltration of the gas molecules into the highly porous aerogel matrix and their interactions with the aerogel-embedded PDA units. The PDA-aerogel composite exhibited rapid color/fluorescence response and enhanced signals upon exposure to low VOC concentrations. Encapsulation of PDA derivatives displaying different headgroups within the aerogel produced distinct VOC-dependent color transformations, forming a PDA-aerogel "artificial nose".
Collapse
|
56
|
Chen M, Hagedorn K, Cölfen H, Polarz S. Functional Gradient Inverse Opal Carbon Monoliths with Directional and Multinary Porosity. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2017; 29:1603356. [PMID: 27783448 DOI: 10.1002/adma.201603356] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2016] [Revised: 09/13/2016] [Indexed: 06/06/2023]
Abstract
Nanoporous monoliths with hierarchical nanostructure are prepared via in situ assembly of template and carbon precursor gel by controlled ultracentrifugation experiments. Benefits of the gradient porosity are demonstrated for the Li-O2 battery.
Collapse
|
57
|
Shim K, Kim J, Heo YU, Jiang B, Li C, Shahabuddin M, Wu KCW, Hossain MSA, Yamauchi Y, Kim JH. Synthesis and Cytotoxicity of Dendritic Platinum Nanoparticles with HEK-293 Cells. Chem Asian J 2016; 12:21-26. [PMID: 27911052 DOI: 10.1002/asia.201601239] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/16/2016] [Indexed: 11/09/2022]
Abstract
Dendritic platinum nanoparticles (DPNs) have been synthesized from l-ascorbic acid and an amphiphilic non-ionic surfactant (Brij-58) via a sonochemical method. The particle size and shape of the DPNs could be tuned by changing the reduction temperature, resulting in a uniform DPN with a size of 23 nm or 60 nm. The facets of DPNs have been studied by high-resolution transmission electron microscopy. The cytotoxicity of DPNs has been investigated using human embryonic kidney cells (HEK-293), and the biological adaptability exhibited by DPNs has opened a pathway to biomedical applications such as drug-delivery systems, photothermal treatment, and biosensors.
Collapse
|
58
|
Yang ZK, Lin L, Xu AW. 2D Nanoporous Fe-N/C Nanosheets as Highly Efficient Non-Platinum Electrocatalysts for Oxygen Reduction Reaction in Zn-Air Battery. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2016; 12:5710-5719. [PMID: 27578240 DOI: 10.1002/smll.201601887] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/03/2016] [Revised: 07/26/2016] [Indexed: 06/06/2023]
Abstract
It is an ongoing challenge to fabricate nonprecious oxygen reduction reaction (ORR) catalysts that can be comparable to or exceed the efficiency of platinum. A highly active non-platinum self-supporting Fe-N/C catalyst has been developed through the pyrolysis of a new type of precursor of iron coordination complex, in which 1,4-bis(1H-1,3,7,8-tetraazacyclopenta(1)phenanthren-2-yl)benzene (btcpb) functions as a ligand complexing Fe(II) ions. The optimal catalyst pyrolyzed at 700 °C (Fe-N/C-700) shows the best ORR activity with a half-wave potential (E1/2 ) of 840 mV versus reversible hydrogen electrode (RHE) in 0.1 m KOH, which is more positive than that of commercial Pt/C (E1/2 : 835 mV vs RHE). Additionally, the Fe-N/C-700 catalyst also exhibits high ORR activity in 0.1 m HClO4 with the onset potential and E1/2 comparable to those of the Pt/C catalyst. Notably, the Fe-N/C-700 catalyst displays superior durability (9.8 mV loss in 0.1 m KOH and 23.6 mV loss in 0.1 m HClO4 for E1/2 after 8000 cycles) and better tolerance to methanol than Pt/C. Furthermore, the Fe-N/C-700 catalyst can be used for fabricating the air electrode in Zn-air battery with a specific capacity of 727 mA hg-1 at 5 mA cm-2 and a negligible voltage loss after continuous operation for 110 h.
Collapse
|
59
|
Collins SP, Daff TD, Piotrkowski SS, Woo TK. Materials design by evolutionary optimization of functional groups in metal-organic frameworks. SCIENCE ADVANCES 2016; 2:e1600954. [PMID: 28138523 PMCID: PMC5262444 DOI: 10.1126/sciadv.1600954] [Citation(s) in RCA: 44] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2016] [Accepted: 10/20/2016] [Indexed: 05/25/2023]
Abstract
A genetic algorithm that efficiently optimizes a desired physical or functional property in metal-organic frameworks (MOFs) by evolving the functional groups within the pores has been developed. The approach has been used to optimize the CO2 uptake capacity of 141 experimentally characterized MOFs under conditions relevant for postcombustion CO2 capture. A total search space of 1.65 trillion structures was screened, and 1035 derivatives of 23 different parent MOFs were identified as having exceptional CO2 uptakes of >3.0 mmol/g (at 0.15 atm and 298 K). Many well-known MOF platforms were optimized, with some, such as MIL-47, having their CO2 adsorption increase by more than 400%. The structures of the high-performing MOFs are provided as potential targets for synthesis.
Collapse
|
60
|
Liang K, Richardson JJ, Cui J, Caruso F, Doonan CJ, Falcaro P. Metal-Organic Framework Coatings as Cytoprotective Exoskeletons for Living Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2016; 28:7910-7914. [PMID: 27414706 DOI: 10.1002/adma.201602335] [Citation(s) in RCA: 189] [Impact Index Per Article: 23.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/02/2016] [Revised: 06/09/2016] [Indexed: 05/18/2023]
Abstract
The biomimetic mineralization of metal-organic framework (MOF) material on living cells is reported. ZIF-8 can be crystallized on a living cell surface as an exoskeleton that offers physical protection while allowing transport of essential nutrients, thus maintaining cell viability. The MOF shell prevents cell division, leading to an artificially induced pseudo-hibernation state. Cellular functions can be fully restored upon MOF removal.
Collapse
|
61
|
Liang K, Richardson JJ, Cui J, Caruso F, Doonan CJ, Falcaro P. Metal-Organic Framework Coatings as Cytoprotective Exoskeletons for Living Cells. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2016; 28:7910-7914. [PMID: 27414706 DOI: 10.1002/adma.201670256] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/02/2016] [Revised: 06/09/2016] [Indexed: 05/24/2023]
Abstract
The biomimetic mineralization of metal-organic framework (MOF) material on living cells is reported. ZIF-8 can be crystallized on a living cell surface as an exoskeleton that offers physical protection while allowing transport of essential nutrients, thus maintaining cell viability. The MOF shell prevents cell division, leading to an artificially induced pseudo-hibernation state. Cellular functions can be fully restored upon MOF removal.
Collapse
|
62
|
Altantzis T, Coutino-Gonzalez E, Baekelant W, Martinez GT, Abakumov AM, Tendeloo GV, Roeffaers MBJ, Bals S, Hofkens J. Direct Observation of Luminescent Silver Clusters Confined in Faujasite Zeolites. ACS NANO 2016; 10:7604-7611. [PMID: 27391548 DOI: 10.1021/acsnano.6b02834] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
One of the ultimate goals in the study of metal clusters is the correlation between the atomic-scale organization and their physicochemical properties. However, direct observation of the atomic organization of such minuscule metal clusters is heavily hindered by radiation damage imposed by the different characterization techniques. We present direct evidence of the structural arrangement, at an atomic level, of luminescent silver species stabilized in faujasite (FAU) zeolites using aberration-corrected scanning transmission electron microscopy. Two different silver clusters were identified in Ag-FAU zeolites, a trinuclear silver species associated with green emission and a tetranuclear silver species related to yellow emission. By combining direct imaging with complementary information obtained from X-ray powder diffraction and Rietveld analysis, we were able to elucidate the main differences at an atomic scale between luminescent (heat-treated) and nonluminescent (cation-exchanged) Ag-FAU zeolites. It is expected that such insights will trigger the directed synthesis of functional metal nanocluster-zeolite composites with tailored luminescent properties.
Collapse
|
63
|
Nanoporous Monolithic Microsphere Arrays Have Anti-Adhesive Properties Independent of Humidity. MATERIALS 2016; 9:ma9050373. [PMID: 28773497 PMCID: PMC5503089 DOI: 10.3390/ma9050373] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/19/2016] [Revised: 05/09/2016] [Accepted: 05/10/2016] [Indexed: 11/17/2022]
Abstract
Bioinspired artificial surfaces with tailored adhesive properties have attracted significant interest. While fibrillar adhesive pads mimicking gecko feet are optimized for strong reversible adhesion, monolithic microsphere arrays mimicking the slippery zone of the pitchers of carnivorous plants of the genus Nepenthes show anti-adhesive properties even against tacky counterpart surfaces. In contrast to the influence of topography, the influence of relative humidity (RH) on adhesion has been widely neglected. Some previous works deal with the influence of RH on the adhesive performance of fibrillar adhesive pads. Commonly, humidity-induced softening of the fibrils enhances adhesion. However, little is known on the influence of RH on solid anti-adhesive surfaces. We prepared polymeric nanoporous monolithic microsphere arrays (NMMAs) with microsphere diameters of a few 10 µm to test their anti-adhesive properties at RHs of 2% and 90%. Despite the presence of continuous nanopore systems through which the inner nanopore walls were accessible to humid air, the topography-induced anti-adhesive properties of NMMAs on tacky counterpart surfaces were retained even at RH = 90%. This RH-independent robustness of the anti-adhesive properties of NMMAs significantly contrasts the adhesion enhancement by humidity-induced softening on nanoporous fibrillar adhesive pads made of the same material.
Collapse
|
64
|
Tan Y, Wang H, Liu P, Cheng C, Zhu F, Hirata A, Chen M. 3D Nanoporous Metal Phosphides toward High-Efficiency Electrochemical Hydrogen Production. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2016; 28:2951-5. [PMID: 26889914 DOI: 10.1002/adma.201505875] [Citation(s) in RCA: 63] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/26/2015] [Revised: 12/11/2015] [Indexed: 05/06/2023]
Abstract
Free-standing nanoporous metal phosphides are fabricated by a novel top-down method, by selectively leaching less-stable metal phases from rapidly solidified two-phase metal-phosphorus alloys. The phosphide phases with relatively high electrochemical stability are left as the skeletons of nanoporous structures. The resultant nanoporous phosphides with tunable pore size and porosity show superior catalytic activities toward electrochemical hydrogen production.
Collapse
|
65
|
Pramanik M, Salunkhe RR, Imura M, Yamauchi Y. Phosphonate-Derived Nanoporous Metal Phosphates and Their Superior Energy Storage Application. ACS APPLIED MATERIALS & INTERFACES 2016; 8:9790-9797. [PMID: 27028363 DOI: 10.1021/acsami.6b01012] [Citation(s) in RCA: 28] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Nanoporous nickel, aluminum, and zirconium phosphates (hereafter, abbreviated as NiP, AlP, and ZrP, respectively) with high surface areas and controlled morphology and crystallinity have been synthesized through simple calcination of the corresponding phosphonates. For the preparation of phosphonate materials, nitrilotris(methylene)triphosphonic acid (NMPA) is used as phosphorus source. The organic component in the phosphonate materials is thermally removed to form nanoporous structures in the final phosphate materials. The formation mechanism of nanoporous structures, as well as the effect of applied calcination temperatures on the morphology and crystallinity of the final phosphate materials, is carefully discussed. Especially, nanoporous NiP materials have a spherical morphology with a high surface area and can have great applicability as an electrode material for supercapacitors. It has been found that there is a critical effect of particle sizes, surface areas, and the crystallinities of NiP materials toward electrochemical behavior. Our nanoporous NiP material has superior specific capacitance, as compared to various phosphate nanomaterials reported previously. Excellent retention capacity of 97% is realized even after 1000 cycles, which can be ascribed to its high structural stability.
Collapse
|
66
|
Aramesh M, Djalalian-Assl A, Yajadda MMA, Prawer S, Ostrikov KK. Thin Nanoporous Metal-Insulator-Metal Membranes. ACS APPLIED MATERIALS & INTERFACES 2016; 8:4292-4297. [PMID: 26846250 DOI: 10.1021/acsami.5b11182] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Insulating nanoporous materials are promising platforms for soft-ionizing membranes; however, improvement in fabrication processes and the quality and high breakdown resistance of the thin insulator layers are needed for high integration and performance. Here, scalable fabrication of highly porous, thin, silicon dioxide membranes with controlled thickness is demonstrated using plasma-enhanced chemical-vapor-deposition. The fabricated membranes exhibit good insulating properties with a breakdown voltage of 1 × 10(7) V/cm. Our calculations suggest that the average electric field inside a nanopore of the membranes can be as high as 1 × 10(6) V/cm; sufficient for ionization of wide range of molecules. These metal-insulator-metal nanoporous arrays are promising for applications such soft ionizing membranes for mass spectroscopy.
Collapse
|
67
|
Voitekhovich SV, Lesnyak V, Gaponik N, Eychmüller A. Tetrazoles: Unique Capping Ligands and Precursors for Nanostructured Materials. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2015; 11:5728-5739. [PMID: 26395565 DOI: 10.1002/smll.201501630] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/09/2015] [Revised: 07/26/2015] [Indexed: 06/05/2023]
Abstract
Capping agents play an important role in the colloidal synthesis of nanomaterials because they control the nucleation and growth of particles, as well as their chemical and colloidal stability. During recent years tetrazole derivatives have proven to be advanced capping ligands for the stabilization of semiconductor and metal nanoparticles. Tetrazole-capped nanoparticles can be prepared by solution-phase or solventless single precursor approaches using metal derivatives of tetrazoles. The solventless thermolysis of metal tetrazolates can produce both individual semiconductor nanocrystals and nanostructured metal monolithic foams displaying low densities and high surface areas. Alternatively, highly porous nanoparticle 3D assemblies are achieved through the controllable aggregation of tetrazole-capped particles in solutions. This approach allows for the preparation of non-ordered hybrid structures consisting of different building blocks, such as mixed semiconductor and metal nanoparticle-based (aero)gels with tunable compositions. Another unique property of tetrazoles is their complete thermal decomposition, forming only gaseous products, which is employed in the fabrication of organic-free semiconductor films from tetrazole-capped nanoparticles. After deposition and subsequent thermal treatment these films exhibit significantly improved electrical transport. The synthetic availability and advances in the functionalization of tetrazoles necessitate further design and study of tetrazole-capped nanoparticles for various applications.
Collapse
|
68
|
Martí-Gastaldo C, Warren JE, Briggs ME, Armstrong JA, Thomas KM, Rosseinsky MJ. Sponge-Like Behaviour in Isoreticular Cu(Gly-His-X) Peptide-Based Porous Materials. Chemistry 2015; 21:16027-34. [PMID: 26406996 PMCID: PMC4676333 DOI: 10.1002/chem.201502098] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2015] [Revised: 08/18/2015] [Indexed: 11/08/2022]
Abstract
We report two isoreticular 3D peptide-based porous frameworks formed by coordination of the tripeptides Gly-L-His-Gly and Gly-L-His-L-Lys to Cu(II) which display sponge-like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H2 O while CO2 adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbone, can be post-synthetically modified to produce urea-functionalised networks by following methodologies typically used for metal-organic frameworks built from more rigid "classical" linkers.
Collapse
|
69
|
Zhang C, Koros WJ. Tailoring the Transport Properties of Zeolitic Imidazolate Frameworks by Post-Synthetic Thermal Modification. ACS APPLIED MATERIALS & INTERFACES 2015; 7:23407-23411. [PMID: 26451850 DOI: 10.1021/acsami.5b07769] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Understanding how to control transport properties of zeolitic imidazolate frameworks (ZIFs) is critical to extend ZIF-based membranes and adsorbents to a wide spectrum of gas and vapor separations. In this work, we report a facile post-synthetic thermal modification (PSTM) technique to tailor ZIFs' transport properties by balancing diffusivity and diffusion selectivity. With controllable dissociation of framework methyl groups from a precursor ZIF (ZIF-8), we have prepared thermally modified ZIFs showing substantially increased n-butane diffusivity and attractive n/iso-butane diffusion selectivity. Hybrid ZIF/polymer mixed-matrix membranes formed using these thermally modified ZIFs are expected to deliver attractive butane isomer separation performance. Membranes based on such materials can potentially be used to retrofit refinery alkylation units for producing premium gasoline blending stocks.
Collapse
|
70
|
Ting VP, Ramirez-Cuesta AJ, Bimbo N, Sharpe JE, Noguera-Diaz A, Presser V, Rudic S, Mays TJ. Direct Evidence for Solid-like Hydrogen in a Nanoporous Carbon Hydrogen Storage Material at Supercritical Temperatures. ACS NANO 2015; 9:8249-8254. [PMID: 26171656 DOI: 10.1021/acsnano.5b02623] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
Here we report direct physical evidence that confinement of molecular hydrogen (H2) in an optimized nanoporous carbon results in accumulation of hydrogen with characteristics commensurate with solid H2 at temperatures up to 67 K above the liquid-vapor critical temperature of bulk H2. This extreme densification is attributed to confinement of H2 molecules in the optimally sized micropores, and occurs at pressures as low as 0.02 MPa. The quantities of contained, solid-like H2 increased with pressure and were directly evaluated using in situ inelastic neutron scattering and confirmed by analysis of gas sorption isotherms. The demonstration of the existence of solid-like H2 challenges the existing assumption that supercritical hydrogen confined in nanopores has an upper limit of liquid H2 density. Thus, this insight offers opportunities for the development of more accurate models for the evaluation and design of nanoporous materials for high capacity adsorptive hydrogen storage.
Collapse
|
71
|
Ito Y, Tanabe Y, Han J, Fujita T, Tanigaki K, Chen M. Multifunctional Porous Graphene for High-Efficiency Steam Generation by Heat Localization. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2015; 27:4302-7. [PMID: 26079440 DOI: 10.1002/adma.201501832] [Citation(s) in RCA: 261] [Impact Index Per Article: 29.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/16/2015] [Revised: 05/08/2015] [Indexed: 05/24/2023]
Abstract
Multifunctional nanoporous graphene is realized as a heat generator to convert solar illumination into high-energy steam. The novel 3D nanoporous graphene demonstrates a highly energy-effective steam generation with an energy conversation of 80%.
Collapse
|
72
|
Higgins DA, Park SC, Tran-Ba KH, Ito T. Single-Molecule Investigations of Morphology and Mass Transport Dynamics in Nanostructured Materials. ANNUAL REVIEW OF ANALYTICAL CHEMISTRY (PALO ALTO, CALIF.) 2015; 8:193-216. [PMID: 26132347 DOI: 10.1146/annurev-anchem-071114-040153] [Citation(s) in RCA: 30] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Nanostructured materials such as mesoporous metal oxides and phase-separated block copolymers form the basis for new monolith, membrane, and thin film technologies having applications in energy storage, chemical catalysis, and separations. Mass transport plays an integral role in governing the application-specific performance characteristics of many such materials. The majority of methods employed in their characterization provide only ensemble data, often masking the nanoscale, molecular-level details of materials morphology and mass transport. Single-molecule fluorescence methods offer direct routes to probing these characteristics on a single-molecule/single-nanostructure basis. This article provides a review of single-molecule studies focused on measurements of anisotropic diffusion, adsorption, partitioning, and confinement in nanostructured materials. Experimental methods covered include confocal and wide-field fluorescence microscopy. The results obtained promise to deepen our understanding of mass transport mechanisms in nanostructures, thus aiding in the realization of advanced materials systems.
Collapse
|
73
|
Salunkhe RR, Tang J, Kamachi Y, Nakato T, Kim JH, Yamauchi Y. Asymmetric Supercapacitors Using 3D Nanoporous Carbon and Cobalt Oxide Electrodes Synthesized from a Single Metal-Organic Framework. ACS NANO 2015; 9:6288-96. [PMID: 25978143 DOI: 10.1021/acsnano.5b01790] [Citation(s) in RCA: 292] [Impact Index Per Article: 32.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/19/2023]
Abstract
Nanoporous carbon and nanoporous cobalt oxide (Co3O4) materials have been selectively prepared from a single metal-organic framework (MOF) (zeolitic imidazolate framework, ZIF-67) by optimizing the annealing conditions. The resulting ZIF-derived carbon possesses highly graphitic walls and a high specific surface area of 350 m(2)·g(-1), while the resulting ZIF-derived nanoporous Co3O4 possesses a high specific surface area of 148 m(2)·g(-1) with much less carbon content (1.7 at%). When nanoporous carbon and nanoporous Co3O4 were tested as electrode materials for supercapacitor application, they showed high capacitance values (272 and 504 F·g(-1), respectively, at a scan rate of 5 mV·s(-1)). To further demonstrate the advantages of our ZIF-derived nanoporous materials, symmetric (SSCs) and asymmetric supercapacitors (ASCs) were also fabricated using nanoporous carbon and nanoporous Co3O4 electrodes. Improved capacitance performance was successfully realized for the ASC (Co3O4//carbon), better than those of the SSCs based on nanoporous carbon and nanoporous Co3O4 materials (i.e., carbon//carbon and Co3O4//Co3O4). The developed ASC with an optimal mass loading can be operated within a wide potential window of 0.0-1.6 V, which leads to a high specific energy of 36 W·h·kg(-1). More interestingly, this ASC also exhibits excellent rate capability (with the highest specific power of 8000 W·kg(-1) at a specific energy of 15 W·h·kg(-1)) combined with long-term stability up to 2000 cycles.
Collapse
|
74
|
Li Z, Xu X, Zhang X. Oxidation of organosilanes with nanoporous copper as a sustainable non-noble-metal catalyst. Chemphyschem 2015; 16:1603-6. [PMID: 25808282 DOI: 10.1002/cphc.201500111] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2015] [Indexed: 11/06/2022]
Abstract
Although many noble-metal catalysts have been used for the oxidation of organosilanes, there has been less success with non-noble-metal catalysts. Here, unsupported nanoporous copper (np-Cu) is used to catalyze the oxidation of organosilanes under mild conditions. It is the first time that this reaction has been achieved with a heterogeneous copper catalyst with high activity and selectivity. Both water and alcohols are used as oxidants and the corresponding organosilanols and organosilyl ethers are obtained in high yield. The possible mechanism was obtained by kinetic studies. The catalyst could be reused at least five times without evident loss of activity. As a novel green catalyst np-Cu should play a unique role in organic synthesis.
Collapse
|
75
|
DeBlase CR, Hernández-Burgos K, Silberstein KE, Rodríguez-Calero GG, Bisbey RP, Abruña HD, Dichtel WR. Rapid and efficient redox processes within 2D covalent organic framework thin films. ACS NANO 2015; 9:3178-83. [PMID: 25672785 DOI: 10.1021/acsnano.5b00184] [Citation(s) in RCA: 197] [Impact Index Per Article: 21.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
Two-dimensional covalent organic frameworks (2D COFs) are ideally suited for organizing redox-active subunits into periodic, permanently porous polymer networks of interest for pseudocapacitive energy storage. Here we describe a method for synthesizing crystalline, oriented thin films of a redox-active 2D COF on Au working electrodes. The thickness of the COF film was controlled by varying the initial monomer concentration. A large percentage (80-99%) of the anthraquinone groups are electrochemically accessible in films thinner than 200 nm, an order of magnitude improvement over the same COF prepared as a randomly oriented microcrystalline powder. As a result, electrodes functionalized with oriented COF films exhibit a 400% increase in capacitance scaled to electrode area as compared to those functionalized with the randomly oriented COF powder. These results demonstrate the promise of redox-active COFs for electrical energy storage and highlight the importance of controlling morphology for optimal performance.
Collapse
|
76
|
Fernandez M, Boyd PG, Daff TD, Aghaji MZ, Woo TK. Rapid and Accurate Machine Learning Recognition of High Performing Metal Organic Frameworks for CO2 Capture. J Phys Chem Lett 2014; 5:3056-60. [PMID: 26278259 DOI: 10.1021/jz501331m] [Citation(s) in RCA: 115] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
In this work, we have developed quantitative structure-property relationship (QSPR) models using advanced machine learning algorithms that can rapidly and accurately recognize high-performing metal organic framework (MOF) materials for CO2 capture. More specifically, QSPR classifiers have been developed that can, in a fraction of a section, identify candidate MOFs with enhanced CO2 adsorption capacity (>1 mmol/g at 0.15 bar and >4 mmol/g at 1 bar). The models were tested on a large set of 292 050 MOFs that were not part of the training set. The QSPR classifier could recover 945 of the top 1000 MOFs in the test set while flagging only 10% of the whole library for compute intensive screening. Thus, using the machine learning classifiers as part of a high-throughput screening protocol would result in an order of magnitude reduction in compute time and allow intractably large structure libraries and search spaces to be screened.
Collapse
|
77
|
Khan MS, Dosoky NS, Williams JD. Engineering lipid bilayer membranes for protein studies. Int J Mol Sci 2013; 14:21561-97. [PMID: 24185908 PMCID: PMC3856022 DOI: 10.3390/ijms141121561] [Citation(s) in RCA: 81] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/06/2013] [Revised: 10/13/2013] [Accepted: 10/21/2013] [Indexed: 01/05/2023] Open
Abstract
Lipid membranes regulate the flow of nutrients and communication signaling between cells and protect the sub-cellular structures. Recent attempts to fabricate artificial systems using nanostructures that mimic the physiological properties of natural lipid bilayer membranes (LBM) fused with transmembrane proteins have helped demonstrate the importance of temperature, pH, ionic strength, adsorption behavior, conformational reorientation and surface density in cellular membranes which all affect the incorporation of proteins on solid surfaces. Much of this work is performed on artificial templates made of polymer sponges or porous materials based on alumina, mica, and porous silicon (PSi) surfaces. For example, porous silicon materials have high biocompatibility, biodegradability, and photoluminescence, which allow them to be used both as a support structure for lipid bilayers or a template to measure the electrochemical functionality of living cells grown over the surface as in vivo. The variety of these media, coupled with the complex physiological conditions present in living systems, warrant a summary and prospectus detailing which artificial systems provide the most promise for different biological conditions. This study summarizes the use of electrochemical impedance spectroscopy (EIS) data on artificial biological membranes that are closely matched with previously published biological systems using both black lipid membrane and patch clamp techniques.
Collapse
|
78
|
Petrochenko PE, Skoog SA, Zhang Q, Comstock DJ, Elam JW, Goering PL, Narayan RJ. Cytotoxicity of cultured macrophages exposed to antimicrobial zinc oxide (ZnO) coatings on nanoporous aluminum oxide membranes. BIOMATTER 2013; 3:25528. [PMID: 23881040 PMCID: PMC3749283 DOI: 10.4161/biom.25528] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Zinc oxide (ZnO) is a widely used commercial material that is finding use in wound healing applications due to its antimicrobial properties. Our study demonstrates a novel approach for coating ZnO with precise thickness control onto 20 nm and 100 nm pore diameter anodized aluminum oxide using atomic layer deposition (ALD). ZnO was deposited throughout the nanoporous structure of the anodized aluminum oxide membranes. An 8 nm-thick coating of ZnO, previously noted to have antimicrobial properties, was cytotoxic to cultured macrophages. After 48 h, ZnO-coated 20 nm and 100 nm pore anodized aluminum oxide significantly decreased cell viability by ≈65% and 54%, respectively, compared with cells grown on uncoated anodized aluminum oxide membranes and cells grown on tissue culture plates. Pore diameter (20–200 nm) did not influence cell viability.
Collapse
|
79
|
Ortiz AU, Boutin A, Fuchs AH, Coudert FX. Investigating the Pressure-Induced Amorphization of Zeolitic Imidazolate Framework ZIF-8: Mechanical Instability Due to Shear Mode Softening. J Phys Chem Lett 2013; 4:1861-5. [PMID: 26283122 DOI: 10.1021/jz400880p] [Citation(s) in RCA: 84] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
We provide the first molecular dynamics study of the mechanical instability that is the cause of pressure-induced amorphization of zeolitic imidazolate framework ZIF-8. By measuring the elastic constants of ZIF-8 up to the amorphization pressure, we show that the crystal-to-amorphous transition is triggered by the mechanical instability of ZIF-8 under compression, due to shear mode softening of the material. No similar softening was observed under temperature increase, explaining the absence of temperature-induced amorphization in ZIF-8. We also demonstrate the large impact of the presence of adsorbate in the pores on the mechanical stability and compressibility of the framework, increasing its shear stability. This first molecular dynamics study of ZIF mechanical properties under variations of pressure, temperature, and pore filling opens the way to a more comprehensive understanding of their mechanical stability, structural transitions, and amorphization.
Collapse
|
80
|
Shiba K, Tagaya M, Tilley RD, Hanagata N. Oxide-based inorganic/organic and nanoporous spherical particles: synthesis and functional properties. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2013; 14:023002. [PMID: 27877569 PMCID: PMC5074371 DOI: 10.1088/1468-6996/14/2/023002] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2013] [Accepted: 03/26/2013] [Indexed: 06/03/2023]
Abstract
This paper reviews the recent progress in the preparation of oxide-based and heteroatom-doped particles. Surfactant-templated oxide particles, e.g. silica and titania, are possible candidates for various potential applications such as adsorbents, photocatalysts, and optoelectronic and biological materials. We highlight nanoporous oxides of one element, such as silicon or titanium, and those containing multiple elements, which exhibit properties that are not achieved with individual components. Although the multicomponent nanoporous oxides possess a number of attractive functions, the origin of their properties is hard to determine due to compositional/structural complexity. Particles with a well-defined size and shape are keys for a quantitative and detailed discussion on the unique complex properties of the particles. From this viewpoint, we review the synthesis techniques of the oxide particles, which are functionalized with organic molecules or doped with heteroatoms, the physicochemical properties of the particles and the possibilities for their photofunctional applications as complex systems.
Collapse
|
81
|
Culebras M, Madroñero A, Cantarero A, Amo JM, Domingo C, López A. Confident methods for the evaluation of the hydrogen content in nanoporous carbon microfibers. NANOSCALE RESEARCH LETTERS 2012; 7:588. [PMID: 23095321 PMCID: PMC3564694 DOI: 10.1186/1556-276x-7-588] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/25/2012] [Accepted: 09/05/2012] [Indexed: 06/01/2023]
Abstract
: Nanoporous carbon microfibers were grown by chemical vapor deposition in the vapor-liquid solid mode using different fluid hydrocarbons as precursors in different proportions. The as-grown samples were further treated in argon and hydrogen atmospheres at different pressure conditions and annealed at several temperatures in order to deduce the best conditions for the incorporation and re-incorporation of hydrogen into the microfibers through the nanopores. Since there are some discrepancies in the results on the hydrogen content obtained under vacuum conditions, in this work, we have measured the hydrogen content in the microfibers using several analytical methods in ambient conditions: surface tension, mass density, and Raman measurements. A discussion on the validity of the results obtained through the correlation between them is the purpose of the present work.
Collapse
|
82
|
Jin L, Auerbach SM, Monson PA. Emergence of Zeolite Analogs and other Microporous Crystals in an Atomic Lattice Model of Silica and Related Materials. J Phys Chem Lett 2012; 3:761-765. [PMID: 26286287 DOI: 10.1021/jz3001097] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
The potential of tailored nanopores to transform technologies such as drug delivery, biofuel production, and optical-electronic devices depends on fundamental knowledge of the self-assembly of ordered nanoporous solids. Atomic-level geometries of critical nuclei that lead to such solids have remained hidden in the nanoscale blind spot between local (<0.5 nm) and collective (>5 nm) probes of structure. Heroic efforts at molecular simulation of nanopore formation have provided massive libraries of hypothetical structures; (1-5) however, to date no statistical simulation has generated a crystallization pathway from random initial condition to ordered nanoporous solid, until now. In this work, we show that a recently developed atomic lattice model of silica and related materials can form ordered nanoporous solids with a rich variety of structures including known chalcogenides, zeolite analogs, and layered materials. We find that whereas canonical Monte Carlo simulations of the model consistently produce the amorphous solids studied in our previous work, parallel tempering Monte Carlo gives rise to ordered nanoporous solids. The utility of parallel tempering highlights the existence of barriers between amorphous and crystalline phases of our model. Moreover, the self-assembly or nanoporous crystalline phases in the model open the door to detailed understanding of nanopore nucleation.
Collapse
|
83
|
Vega V, Prida VM, Hernández-Vélez M, Manova E, Aranda P, Ruiz-Hitzky E, Vázquez M. Influence of Anodic Conditions on Self-ordered Growth of Highly Aligned Titanium Oxide Nanopores. NANOSCALE RESEARCH LETTERS 2007; 2:355-363. [PMCID: PMC3246376 DOI: 10.1007/s11671-007-9073-5] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2007] [Accepted: 06/15/2007] [Indexed: 05/23/2023]
Abstract
Self-aligned nanoporous TiO2templates synthesized via dc current electrochemical anodization have been carefully analyzed. The influence of environmental temperature during the anodization, ranging from 2 °C to ambient, on the structure and morphology of the nanoporous oxide formation has been investigated, as well as that of the HF electrolyte chemical composition, its concentration and their mixtures with other acids employed for the anodization. Arrays of self-assembled titania nanopores with inner pores diameter ranging between 50 and 100 nm, wall thickness around 20–60 nm and 300 nm in length, are grown in amorphous phase, vertical to the Ti substrate, parallel aligned to each other and uniformly disordering distributed over all the sample surface. Additional remarks about the photoluminiscence properties of the titania nanoporous templates and the magnetic behavior of the Ni filled nanoporous semiconductor Ti oxide template are also included.
Collapse
|